linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: ulf.hansson@linaro.org, robh+dt@kernel.org,
	bjorn.andersson@linaro.org, viresh.kumar@linaro.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	swboyd@chromium.org, rojay@codeaurora.org,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v2 1/3] dt-bindings: power: Introduce 'assigned-performance-states' property
Date: Thu, 27 May 2021 11:42:27 +0530	[thread overview]
Message-ID: <1622095949-2014-2-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1622095949-2014-1-git-send-email-rnayak@codeaurora.org>

While most devices within power-domains which support performance states,
scale the performance state dynamically, some devices might want to
set a static/default performance state while the device is active.
These devices typically would also run off a fixed clock and not support
dynamically scaling the device's performance, also known as DVFS techniques.
Add a property 'assigned-performance-states' which client devices can
use to set this default performance state on their power-domains.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 .../devicetree/bindings/power/power-domain.yaml    | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
index aed51e9..88cebf2 100644
--- a/Documentation/devicetree/bindings/power/power-domain.yaml
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -66,6 +66,19 @@ properties:
       by the given provider should be subdomains of the domain specified
       by this binding.
 
+  assigned-performance-states:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+       Some devices might need to configure their power domains in a default
+       performance state while the device is active. These devices typically
+       would also run off a fixed clock and not support dynamically scaling the
+       device's performance, also known as DVFS techniques. The list of performance
+       state values should correspond to the list of power domains specified as part
+       of the power-domains property. Each cell corresponds to one power-domain.
+       A value of 0 can be used for power-domains with no performance state
+       requirement. In case the power-domains have OPP tables associated, the values
+       here would typically match with one of the entries in the OPP table.
+
 required:
   - "#power-domain-cells"
 
@@ -131,3 +144,40 @@ examples:
             min-residency-us = <7000>;
         };
     };
+
+  - |
+    parent4: power-controller@12340000 {
+        compatible = "foo,power-controller";
+        reg = <0x12340000 0x1000>;
+        #power-domain-cells = <0>;
+    };
+
+    parent5: power-controller@43210000 {
+        compatible = "foo,power-controller";
+        reg = <0x43210000 0x1000>;
+        #power-domain-cells = <0>;
+        operating-points-v2 = <&power_opp_table>;
+
+        power_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            power_opp_low: opp1 {
+                opp-level = <16>;
+            };
+
+            rpmpd_opp_ret: opp2 {
+                opp-level = <64>;
+            };
+
+            rpmpd_opp_svs: opp3 {
+                opp-level = <256>;
+            };
+        };
+    };
+
+    child4: consumer@12341000 {
+        compatible = "foo,consumer";
+        reg = <0x12341000 0x1000>;
+        power-domains = <&parent4>, <&parent5>;
+        assigned-performance-states = <0>, <256>;
+    };
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


  reply	other threads:[~2021-05-27  6:13 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-27  6:12 [PATCH v2 0/3] PM / Domains: Add support for assigned-performance-states Rajendra Nayak
2021-05-27  6:12 ` Rajendra Nayak [this message]
2021-05-27  6:16   ` [PATCH v2 1/3] dt-bindings: power: Introduce 'assigned-performance-states' property Viresh Kumar
2021-05-27  6:21     ` Rajendra Nayak
2021-05-27 14:23   ` Rob Herring
2021-05-27 14:26     ` Rob Herring
2021-06-01 10:33   ` Ulf Hansson
2021-06-01 11:12   ` Stephan Gerhold
2021-06-01 11:44     ` Viresh Kumar
2021-06-02 10:45       ` Ulf Hansson
2021-06-02 10:54         ` Viresh Kumar
2021-06-02 12:50           ` Ulf Hansson
2021-06-15 15:05   ` Ulf Hansson
2021-06-18  6:01     ` Rajendra Nayak
2021-05-27  6:12 ` [PATCH v2 2/3] PM / Domains: Add support for 'assigned-performance-states' Rajendra Nayak
2021-05-27  6:12 ` [PATCH v2 3/3] arm64: dts: sc7180: Add assigned-performance-states for i2c Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1622095949-2014-2-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=rojay@codeaurora.org \
    --cc=swboyd@chromium.org \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    --subject='Re: [PATCH v2 1/3] dt-bindings: power: Introduce '\''assigned-performance-states'\'' property' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).