From: David Brownell <david-b@pacbell.net>
To: Vitaly Wool <vwool@ru.mvista.com>
Cc: Greg KH <greg@kroah.com>,
linux-kernel@vger.kernel.org, dpervushin@gmail.com,
akpm@osdl.org, basicmark@yahoo.com, komal_shah802003@yahoo.com,
stephen@streetfiresound.com,
spi-devel-general@lists.sourceforge.net, Joachim_Jaeger@digi.com
Subject: Re: [PATCH/RFC] SPI: add DMAUNSAFE analog
Date: Wed, 14 Dec 2005 10:50:54 -0800 [thread overview]
Message-ID: <200512141050.55294.david-b@pacbell.net> (raw)
In-Reply-To: <43A05C32.3070501@ru.mvista.com>
On Wednesday 14 December 2005 9:53 am, Vitaly Wool wrote:
> Greg KH wrote:
>
> >What is the speed of your SPI bus?
> >
> >And what are your preformance requirements?
> >
> >
> The maximum frequency for the SPI bus is 26 MHz, WLAN driver is to work
> at true 10 Mbit/sec.
Some SPI flash chips are rated at 60 MHz ... there's no "official"
standard placing such limits on SPI.
The various IEEE 802.15.4 (ZigBee) transceivers seem to take up
to 10 MHz clocks, FWIW. USB controllers, 12 MHz (surprise! they
are of course full speed, 12 MHz).
Sensors with A-to-D converters are often lower rate; only 100K
samples per second, say, at maybe 12 bits each; more like 2 MHz.
- Dave
next prev parent reply other threads:[~2005-12-14 19:27 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-12 15:20 [PATCH 2.6-git 0/4] SPI core refresh Vitaly Wool
2005-12-12 15:22 ` [PATCH 2.6-git 1/4] SPI core refresh: SPI core patch Vitaly Wool
2005-12-12 15:49 ` Russell King
2005-12-12 15:24 ` [PATCH 2.6-git 2/4] SPI core refresh: MTD dataflash driver Vitaly Wool
2005-12-12 15:26 ` [PATCH 2.6-git 3/4] SPI core refresh: SPI/PNX controller Vitaly Wool
2005-12-12 15:27 ` [PATCH 2.6-git 4/4] SPI core refresh: dumb EEPROM driver Vitaly Wool
2005-12-12 18:01 ` [PATCH 2.6-git 0/4] SPI core refresh Rui Sousa
2005-12-13 12:09 ` [spi-devel-general] " dmitry pervushin
2005-12-13 15:11 ` Rui Sousa
2005-12-13 17:06 ` dmitry pervushin
2005-12-14 6:57 ` Vitaly Wool
2005-12-14 14:28 ` Rui Sousa
2005-12-13 16:35 ` David Brownell
2005-12-13 18:02 ` Rui Sousa
2005-12-13 14:06 ` [PATCH/RFC] SPI: add async message handing library to David Brownell's core Vitaly Wool
2005-12-13 16:53 ` [PATCH/RFC] SPI: add DMAUNSAFE analog " Vitaly Wool
2005-12-13 19:01 ` David Brownell
2005-12-13 19:15 ` Greg KH
2005-12-14 13:50 ` Vitaly Wool
2005-12-14 17:18 ` Greg KH
2005-12-14 17:53 ` Vitaly Wool
2005-12-14 18:50 ` David Brownell [this message]
2005-12-14 19:29 ` [PATCH/RFC] SPI: add DMAUNSAFE analog Vitaly Wool
2005-12-14 19:02 ` [PATCH/RFC] SPI: add DMAUNSAFE analog to David Brownell's core David Brownell
2005-12-14 19:19 ` Vitaly Wool
2005-12-14 19:33 ` [spi-devel-general] Re: [PATCH/RFC] SPI: add DMAUNSAFE analog David Brownell
2005-12-14 19:34 ` [PATCH/RFC] SPI: add DMAUNSAFE analog to David Brownell's core Vitaly Wool
2005-12-15 6:47 ` Vitaly Wool
2005-12-15 16:44 ` Greg KH
2005-12-15 22:23 ` Vitaly Wool
2005-12-15 23:02 ` Greg KH
2005-12-16 8:37 ` Vitaly Wool
2005-12-16 17:34 ` Greg KH
2005-12-16 18:32 ` [spi-devel-general] Re: [PATCH/RFC] SPI: add DMAUNSAFE analog David Brownell
2005-12-15 20:06 ` David Brownell
2005-12-15 22:17 ` Vitaly Wool
2005-12-15 22:33 ` Greg KH
2005-12-16 3:34 ` Andy Isaacson
2005-12-16 5:17 ` Greg KH
2005-12-14 19:16 ` [PATCH/RFC] SPI: add DMAUNSAFE analog to David Brownell's core Greg KH
2005-12-14 19:30 ` Vitaly Wool
2005-12-15 10:00 ` [spi-devel-general] " dmitry pervushin
2005-12-14 17:22 ` David Brownell
2005-12-14 17:50 ` Vitaly Wool
2005-12-14 19:17 ` [PATCH/RFC] SPI: add DMAUNSAFE analog David Brownell
2005-12-14 20:11 ` Vitaly Wool
2005-12-13 21:47 ` [PATCH/RFC] SPI: add DMAUNSAFE analog to David Brownell's core Vitaly Wool
2005-12-13 22:15 ` Vitaly Wool
2005-12-14 16:55 ` David Brownell
2005-12-14 17:23 ` Vitaly Wool
2005-12-14 18:48 ` [PATCH/RFC] SPI: add async message handing library " Stephen Street
2005-12-14 19:41 ` Vitaly Wool
2005-12-14 21:19 ` Stephen Street
2005-12-14 19:31 ` [PATCH/RFC] SPI: add async message handing library David Brownell
2005-12-15 12:19 ` [PATCH/RFC] SPI: async message handing library update Vitaly Wool
2005-12-18 18:59 ` David Brownell
2005-12-19 15:40 ` [spi-devel-general] " dmitry pervushin
2005-12-20 7:23 ` David Brownell
2005-12-20 18:02 ` Vitaly Wool
2005-12-22 17:28 ` David Brownell
2005-12-22 22:10 ` Vitaly Wool
2005-12-22 23:55 ` David Brownell
2005-12-21 13:17 ` Vitaly Wool
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200512141050.55294.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=Joachim_Jaeger@digi.com \
--cc=akpm@osdl.org \
--cc=basicmark@yahoo.com \
--cc=dpervushin@gmail.com \
--cc=greg@kroah.com \
--cc=komal_shah802003@yahoo.com \
--cc=linux-kernel@vger.kernel.org \
--cc=spi-devel-general@lists.sourceforge.net \
--cc=stephen@streetfiresound.com \
--cc=vwool@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).