From: Marcelo Tosatti <mtosatti@redhat.com>
To: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: gleb@redhat.com, avi.kivity@gmail.com, pbonzini@redhat.com,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: Re: [PATCH v3 03/15] KVM: MMU: flush tlb if the spte can be locklessly modified
Date: Tue, 12 Nov 2013 22:10:30 -0200 [thread overview]
Message-ID: <20131113001030.GB14651@amt.cnet> (raw)
In-Reply-To: <1382534973-13197-4-git-send-email-xiaoguangrong@linux.vnet.ibm.com>
On Wed, Oct 23, 2013 at 09:29:21PM +0800, Xiao Guangrong wrote:
> Relax the tlb flush condition since we will write-protect the spte out of mmu
> lock. Note lockless write-protection only marks the writable spte to readonly
> and the spte can be writable only if both SPTE_HOST_WRITEABLE and
> SPTE_MMU_WRITEABLE are set (that are tested by spte_is_locklessly_modifiable)
>
> This patch is used to avoid this kind of race:
>
> VCPU 0 VCPU 1
> lockless wirte protection:
> set spte.w = 0
> lock mmu-lock
>
> write protection the spte to sync shadow page,
> see spte.w = 0, then without flush tlb
>
> unlock mmu-lock
>
> !!! At this point, the shadow page can still be
> writable due to the corrupt tlb entry
> Flush all TLB
>
> Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
next prev parent reply other threads:[~2013-11-13 1:30 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-23 13:29 [PATCH v3 00/15] KVM: MMU: locklessly write-protect Xiao Guangrong
2013-10-23 13:29 ` [PATCH v3 01/15] KVM: MMU: properly check last spte in fast_page_fault() Xiao Guangrong
2013-11-12 0:25 ` Marcelo Tosatti
2013-10-23 13:29 ` [PATCH v3 02/15] KVM: MMU: lazily drop large spte Xiao Guangrong
2013-11-12 22:44 ` Marcelo Tosatti
2013-10-23 13:29 ` [PATCH v3 03/15] KVM: MMU: flush tlb if the spte can be locklessly modified Xiao Guangrong
2013-11-13 0:10 ` Marcelo Tosatti [this message]
2013-10-23 13:29 ` [PATCH v3 04/15] KVM: MMU: flush tlb out of mmu lock when write-protect the sptes Xiao Guangrong
2013-11-14 0:36 ` Marcelo Tosatti
2013-11-14 5:15 ` Xiao Guangrong
2013-11-14 18:39 ` Marcelo Tosatti
2013-11-15 7:09 ` Xiao Guangrong
2013-11-19 0:19 ` Marcelo Tosatti
2013-10-23 13:29 ` [PATCH v3 05/15] KVM: MMU: update spte and add it into rmap before dirty log Xiao Guangrong
2013-11-15 0:08 ` Marcelo Tosatti
2013-10-23 13:29 ` [PATCH v3 06/15] KVM: MMU: redesign the algorithm of pte_list Xiao Guangrong
2013-11-19 0:48 ` Marcelo Tosatti
2013-10-23 13:29 ` [PATCH v3 07/15] KVM: MMU: introduce nulls desc Xiao Guangrong
2013-11-22 19:14 ` Marcelo Tosatti
2013-11-25 6:11 ` Xiao Guangrong
2013-11-25 6:29 ` Xiao Guangrong
2013-11-25 18:12 ` Marcelo Tosatti
2013-11-26 3:21 ` Xiao Guangrong
2013-11-26 10:12 ` Gleb Natapov
2013-11-26 19:31 ` Marcelo Tosatti
2013-11-28 8:53 ` Xiao Guangrong
2013-12-03 7:10 ` Xiao Guangrong
2013-12-05 13:50 ` Marcelo Tosatti
2013-12-05 15:30 ` Xiao Guangrong
2013-12-06 0:15 ` Marcelo Tosatti
2013-12-06 0:22 ` Marcelo Tosatti
2013-12-10 6:58 ` Xiao Guangrong
2013-11-25 10:19 ` Gleb Natapov
2013-11-25 10:25 ` Xiao Guangrong
2013-11-25 12:48 ` Avi Kivity
2013-11-25 14:23 ` Marcelo Tosatti
2013-11-25 14:29 ` Gleb Natapov
2013-11-25 18:06 ` Marcelo Tosatti
2013-11-26 3:10 ` Xiao Guangrong
2013-11-26 10:15 ` Gleb Natapov
2013-11-26 19:58 ` Marcelo Tosatti
2013-11-28 8:32 ` Xiao Guangrong
2013-11-25 14:08 ` Marcelo Tosatti
2013-11-26 3:02 ` Xiao Guangrong
2013-11-25 9:31 ` Peter Zijlstra
2013-11-25 10:59 ` Xiao Guangrong
2013-11-25 11:05 ` Peter Zijlstra
2013-11-25 11:29 ` Peter Zijlstra
2013-10-23 13:29 ` [PATCH v3 08/15] KVM: MMU: introduce pte-list lockless walker Xiao Guangrong
2013-10-23 13:29 ` [PATCH v3 09/15] KVM: MMU: initialize the pointers in pte_list_desc properly Xiao Guangrong
2013-10-23 13:29 ` [PATCH v3 10/15] KVM: MMU: allocate shadow pages from slab Xiao Guangrong
2013-10-24 9:19 ` Gleb Natapov
2013-10-24 9:29 ` Xiao Guangrong
2013-10-24 9:52 ` Gleb Natapov
2013-10-24 10:10 ` Xiao Guangrong
2013-10-24 10:39 ` Gleb Natapov
2013-10-24 11:01 ` Xiao Guangrong
2013-10-24 12:32 ` Gleb Natapov
2013-10-28 3:16 ` Xiao Guangrong
2013-10-23 13:29 ` [PATCH v3 11/15] KVM: MMU: locklessly access shadow page under rcu protection Xiao Guangrong
2013-10-23 13:29 ` [PATCH v3 12/15] KVM: MMU: check last spte with unawareness of mapping level Xiao Guangrong
2013-10-23 13:29 ` [PATCH v3 13/15] KVM: MMU: locklessly write-protect the page Xiao Guangrong
2013-10-24 9:17 ` Gleb Natapov
2013-10-24 9:24 ` Xiao Guangrong
2013-10-24 9:32 ` Gleb Natapov
2013-10-23 13:29 ` [PATCH v3 14/15] KVM: MMU: clean up spte_write_protect Xiao Guangrong
2013-10-23 13:29 ` [PATCH v3 15/15] KVM: MMU: use rcu functions to access the pointer Xiao Guangrong
2013-11-03 12:29 ` [PATCH v3 00/15] KVM: MMU: locklessly write-protect Gleb Natapov
2013-11-11 5:33 ` Xiao Guangrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131113001030.GB14651@amt.cnet \
--to=mtosatti@redhat.com \
--cc=avi.kivity@gmail.com \
--cc=gleb@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=xiaoguangrong@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).