linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Mihai Donțu" <mihai.dontu@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Jonathan McDowell <noodles@earth.li>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: Re: Audio crackles with 4.1-rc1
Date: Fri, 12 Jun 2015 20:28:09 +0300	[thread overview]
Message-ID: <20150612202809.4ada983f@mdontu-l.dsd.bitdefender.biz> (raw)
In-Reply-To: <s5hk2v9hv5v.wl-tiwai@suse.de>

On Fri, 12 Jun 2015 16:13:16 +0200 Takashi Iwai wrote:
> For your convenience, below is the combined patch for 4.1.
> 
> Jonathan, could you also try this patch and see whether you still get
> the noise?
> 
> ---
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index 0320cb523d9e..919051d92a0b 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -4515,6 +4515,8 @@ enum {
>  	ALC288_FIXUP_DELL_HEADSET_MODE,
>  	ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
>  	ALC288_FIXUP_DELL_XPS_13_GPIO6,
> +	ALC292_FIXUP_DELL_E7X,
> +	ALC292_FIXUP_DISABLE_AAMIX,
>  };
>  
>  static const struct hda_fixup alc269_fixups[] = {
> @@ -5037,6 +5039,16 @@ static const struct hda_fixup alc269_fixups[] = {
>  		.chained = true,
>  		.chain_id = ALC288_FIXUP_DELL1_MIC_NO_PRESENCE
>  	},
> +	[ALC292_FIXUP_DISABLE_AAMIX] = {
> +		.type = HDA_FIXUP_FUNC,
> +		.v.func = alc_fixup_disable_aamix,
> +	},
> +	[ALC292_FIXUP_DELL_E7X] = {
> +		.type = HDA_FIXUP_FUNC,
> +		.v.func = alc_fixup_dell_xps13,
> +		.chained = true,
> +		.chain_id = ALC292_FIXUP_DISABLE_AAMIX
> +	},
>  };
>  
>  static const struct snd_pci_quirk alc269_fixup_tbl[] = {
> @@ -5049,6 +5061,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
>  	SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572),
>  	SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS),
>  	SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
> +	SND_PCI_QUIRK(0x1028, 0x05ca, "Dell Latitude E7240", ALC292_FIXUP_DELL_E7X),
> +	SND_PCI_QUIRK(0x1028, 0x05cb, "Dell Latitude E7440", ALC292_FIXUP_DELL_E7X),
>  	SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER),
>  	SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
>  	SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
> @@ -5637,8 +5651,7 @@ static int patch_alc269(struct hda_codec *codec)
>  
>  	spec = codec->spec;
>  	spec->gen.shared_mic_vref_pin = 0x18;
> -	if (codec->core.vendor_id != 0x10ec0292)
> -		codec->power_save_node = 1;
> +	codec->power_save_node = 1;
>  
>  	snd_hda_pick_fixup(codec, alc269_fixup_models,
>  		       alc269_fixup_tbl, alc269_fixups);

This patch works fine for me. You can add my Tested-by when you re-spin
it for Linus and if Jonathan is happy as well.

Thank you!

-- 
Mihai Donțu

  reply	other threads:[~2015-06-12 17:28 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-28 11:21 Audio crackles with 4.1-rc1 Jonathan McDowell
2015-04-28 12:00 ` Takashi Iwai
2015-04-28 12:35   ` Jonathan McDowell
2015-04-28 13:05     ` Takashi Iwai
2015-04-28 14:43       ` Takashi Iwai
2015-04-29 11:28         ` Jonathan McDowell
2015-04-29 11:54           ` Takashi Iwai
2015-04-30 15:01             ` Jonathan McDowell
2015-04-30 17:06               ` Takashi Iwai
2015-05-02 15:05                 ` Jonathan McDowell
2015-05-19  6:15                   ` Takashi Iwai
2015-05-19 16:19                     ` Jonathan McDowell
2015-05-19 17:09                       ` Takashi Iwai
2015-05-19 21:53                         ` Jonathan McDowell
2015-05-20  5:01                           ` Takashi Iwai
2015-05-20 20:02                             ` Jonathan McDowell
2015-06-10 10:17                             ` Mihai Donțu
2015-06-10 10:22                               ` Takashi Iwai
2015-06-10 10:41                                 ` Mihai Donțu
2015-06-10 10:50                                   ` Takashi Iwai
2015-06-10 11:45                                     ` Mihai Donțu
2015-06-10 12:33                                       ` Takashi Iwai
2015-06-10 12:50                                         ` Takashi Iwai
2015-06-10 16:22                                           ` Mihai Donțu
2015-06-10 16:27                                             ` Takashi Iwai
2015-06-10 16:43                                               ` Mihai Donțu
2015-06-10 18:23                                                 ` Takashi Iwai
2015-06-10 22:12                                                   ` Mihai Donțu
2015-06-11  5:01                                                     ` Takashi Iwai
2015-06-11 22:23                                                       ` Mihai Donțu
2015-06-12  7:00                                                         ` Takashi Iwai
2015-06-12  9:45                                                           ` Mihai Donțu
2015-06-12 10:09                                                             ` Takashi Iwai
2015-06-12 14:13                                                               ` Takashi Iwai
2015-06-12 17:28                                                                 ` Mihai Donțu [this message]
2015-06-14 12:24                                                                 ` Jonathan McDowell
2015-06-15 12:04                                                                   ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150612202809.4ada983f@mdontu-l.dsd.bitdefender.biz \
    --to=mihai.dontu@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=noodles@earth.li \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).