* [PATCH 0/3] arm64: dts: berlin: fix dtc warnings @ 2016-09-06 8:55 Jisheng Zhang 2016-09-06 8:55 ` [PATCH 1/3] arm64: dts: berlin4ct: add missing unit name to /soc node Jisheng Zhang ` (2 more replies) 0 siblings, 3 replies; 8+ messages in thread From: Jisheng Zhang @ 2016-09-06 8:55 UTC (permalink / raw) To: sebastian.hesselbarth, robh+dt, mark.rutland, catalin.marinas, will.deacon Cc: linux-arm-kernel, devicetree, linux-kernel, Jisheng Zhang This is a clean up series to fix berlin arm64 platforms dtc warnings by add missing unit name of /soc node and /memory node. Jisheng Zhang (3): arm64: dts: berlin4ct: add missing unit name to /soc node arm64: dts: berlin4ct-stb: add missing unit name to /memory node arm64: dts: berlin4ct-dmp: add missing unit name to /memory node arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts | 2 +- arch/arm64/boot/dts/marvell/berlin4ct-stb.dts | 2 +- arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) -- 2.9.3 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/3] arm64: dts: berlin4ct: add missing unit name to /soc node 2016-09-06 8:55 [PATCH 0/3] arm64: dts: berlin: fix dtc warnings Jisheng Zhang @ 2016-09-06 8:55 ` Jisheng Zhang 2016-09-06 10:22 ` Mark Rutland 2016-09-06 8:55 ` [PATCH 2/3] arm64: dts: berlin4ct-stb: add missing unit name to /memory node Jisheng Zhang 2016-09-06 8:55 ` [PATCH 3/3] arm64: dts: berlin4ct-dmp: " Jisheng Zhang 2 siblings, 1 reply; 8+ messages in thread From: Jisheng Zhang @ 2016-09-06 8:55 UTC (permalink / raw) To: sebastian.hesselbarth, robh+dt, mark.rutland, catalin.marinas, will.deacon Cc: linux-arm-kernel, devicetree, linux-kernel, Jisheng Zhang This patch fixes the following DTC warning with W=1: "Node /soc has a reg or ranges property, but no unit name" Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi index 099ad93..2d6f91f 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi @@ -134,7 +134,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; - soc { + soc@f7000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; -- 2.9.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/3] arm64: dts: berlin4ct: add missing unit name to /soc node 2016-09-06 8:55 ` [PATCH 1/3] arm64: dts: berlin4ct: add missing unit name to /soc node Jisheng Zhang @ 2016-09-06 10:22 ` Mark Rutland 2016-09-06 10:20 ` Jisheng Zhang 0 siblings, 1 reply; 8+ messages in thread From: Mark Rutland @ 2016-09-06 10:22 UTC (permalink / raw) To: Jisheng Zhang Cc: sebastian.hesselbarth, robh+dt, catalin.marinas, will.deacon, linux-arm-kernel, devicetree, linux-kernel On Tue, Sep 06, 2016 at 04:55:55PM +0800, Jisheng Zhang wrote: > This patch fixes the following DTC warning with W=1: > > "Node /soc has a reg or ranges property, but no unit name" > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> The node is only compatible with simple-bus, and so shouldn't have a reg. Why not remove the reg? Mark > --- > arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > index 099ad93..2d6f91f 100644 > --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > @@ -134,7 +134,7 @@ > <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > }; > > - soc { > + soc@f7000000 { > compatible = "simple-bus"; > #address-cells = <1>; > #size-cells = <1>; > -- > 2.9.3 > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/3] arm64: dts: berlin4ct: add missing unit name to /soc node 2016-09-06 10:22 ` Mark Rutland @ 2016-09-06 10:20 ` Jisheng Zhang 2016-09-06 10:57 ` Mark Rutland 0 siblings, 1 reply; 8+ messages in thread From: Jisheng Zhang @ 2016-09-06 10:20 UTC (permalink / raw) To: Mark Rutland Cc: sebastian.hesselbarth, robh+dt, catalin.marinas, will.deacon, linux-arm-kernel, devicetree, linux-kernel Hi Mark, On Tue, 6 Sep 2016 11:22:08 +0100 Mark Rutland wrote: > On Tue, Sep 06, 2016 at 04:55:55PM +0800, Jisheng Zhang wrote: > > This patch fixes the following DTC warning with W=1: > > > > "Node /soc has a reg or ranges property, but no unit name" > > > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> > > The node is only compatible with simple-bus, and so shouldn't have a > reg. IIUC, the warning is caused by "ranges = <0 0 0xf7000000 0x1000000>;" Thanks, Jisheng > > Why not remove the reg? > > Mark > > > --- > > arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > > index 099ad93..2d6f91f 100644 > > --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > > +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > > @@ -134,7 +134,7 @@ > > <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > > }; > > > > - soc { > > + soc@f7000000 { > > compatible = "simple-bus"; > > #address-cells = <1>; > > #size-cells = <1>; > > -- > > 2.9.3 > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/3] arm64: dts: berlin4ct: add missing unit name to /soc node 2016-09-06 10:20 ` Jisheng Zhang @ 2016-09-06 10:57 ` Mark Rutland 2016-09-06 16:04 ` Stephen Warren 0 siblings, 1 reply; 8+ messages in thread From: Mark Rutland @ 2016-09-06 10:57 UTC (permalink / raw) To: Jisheng Zhang, robh+dt, swarren Cc: sebastian.hesselbarth, catalin.marinas, will.deacon, linux-arm-kernel, devicetree, linux-kernel On Tue, Sep 06, 2016 at 06:20:48PM +0800, Jisheng Zhang wrote: > Hi Mark, > > On Tue, 6 Sep 2016 11:22:08 +0100 Mark Rutland wrote: > > > On Tue, Sep 06, 2016 at 04:55:55PM +0800, Jisheng Zhang wrote: > > > This patch fixes the following DTC warning with W=1: > > > > > > "Node /soc has a reg or ranges property, but no unit name" > > > > > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> > > > > The node is only compatible with simple-bus, and so shouldn't have a > > reg. > > IIUC, the warning is caused by "ranges = <0 0 0xf7000000 0x1000000>;" Hmm.. I've rather confused by that warning. Per ePAPR and the devicetree.org spec, the unit-addresss is meant to match the reg property, and no mention is made of the ranges property. So I do not think that it is necessary to require this. That warning seems to have gone into DTC in commit c9d9121683b35281 ("Warn on node name unit-address presence/absence mismatch"). Rob, Stephen, was there some discussion that prompted ranges requiring a matching unit-address? Thanks, Mark. > > Why not remove the reg? > > > > Mark > > > > > --- > > > arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > > > index 099ad93..2d6f91f 100644 > > > --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > > > +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi > > > @@ -134,7 +134,7 @@ > > > <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > > > }; > > > > > > - soc { > > > + soc@f7000000 { > > > compatible = "simple-bus"; > > > #address-cells = <1>; > > > #size-cells = <1>; > > > -- > > > 2.9.3 > > > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/3] arm64: dts: berlin4ct: add missing unit name to /soc node 2016-09-06 10:57 ` Mark Rutland @ 2016-09-06 16:04 ` Stephen Warren 0 siblings, 0 replies; 8+ messages in thread From: Stephen Warren @ 2016-09-06 16:04 UTC (permalink / raw) To: Mark Rutland, robh+dt Cc: Jisheng Zhang, swarren, sebastian.hesselbarth, catalin.marinas, will.deacon, linux-arm-kernel, devicetree, linux-kernel On 09/06/2016 04:57 AM, Mark Rutland wrote: > On Tue, Sep 06, 2016 at 06:20:48PM +0800, Jisheng Zhang wrote: >> Hi Mark, >> >> On Tue, 6 Sep 2016 11:22:08 +0100 Mark Rutland wrote: >> >>> On Tue, Sep 06, 2016 at 04:55:55PM +0800, Jisheng Zhang wrote: >>>> This patch fixes the following DTC warning with W=1: >>>> >>>> "Node /soc has a reg or ranges property, but no unit name" >>>> >>>> Signed-off-by: Jisheng Zhang <jszhang@marvell.com> >>> >>> The node is only compatible with simple-bus, and so shouldn't have a >>> reg. >> >> IIUC, the warning is caused by "ranges = <0 0 0xf7000000 0x1000000>;" > > Hmm.. I've rather confused by that warning. Per ePAPR and the > devicetree.org spec, the unit-addresss is meant to match the reg > property, and no mention is made of the ranges property. So I do not > think that it is necessary to require this. > > That warning seems to have gone into DTC in commit c9d9121683b35281 > ("Warn on node name unit-address presence/absence mismatch"). > > Rob, Stephen, was there some discussion that prompted ranges requiring > a matching unit-address? It looks like there was some in response to V2 of the patch which introduced this warning in dtc: https://lkml.org/lkml/2013/9/19/301 I assume that's why Rob added that part to the patch when he reposted it. ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/3] arm64: dts: berlin4ct-stb: add missing unit name to /memory node 2016-09-06 8:55 [PATCH 0/3] arm64: dts: berlin: fix dtc warnings Jisheng Zhang 2016-09-06 8:55 ` [PATCH 1/3] arm64: dts: berlin4ct: add missing unit name to /soc node Jisheng Zhang @ 2016-09-06 8:55 ` Jisheng Zhang 2016-09-06 8:55 ` [PATCH 3/3] arm64: dts: berlin4ct-dmp: " Jisheng Zhang 2 siblings, 0 replies; 8+ messages in thread From: Jisheng Zhang @ 2016-09-06 8:55 UTC (permalink / raw) To: sebastian.hesselbarth, robh+dt, mark.rutland, catalin.marinas, will.deacon Cc: linux-arm-kernel, devicetree, linux-kernel, Jisheng Zhang This patch fixes the following DTC warning with W=1: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- arch/arm64/boot/dts/marvell/berlin4ct-stb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts index 348c37e..d47edad 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts +++ b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts @@ -54,7 +54,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@1000000 { device_type = "memory"; /* the first 16MB is for firmwares' usage */ reg = <0 0x01000000 0 0x7f000000>; -- 2.9.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 3/3] arm64: dts: berlin4ct-dmp: add missing unit name to /memory node 2016-09-06 8:55 [PATCH 0/3] arm64: dts: berlin: fix dtc warnings Jisheng Zhang 2016-09-06 8:55 ` [PATCH 1/3] arm64: dts: berlin4ct: add missing unit name to /soc node Jisheng Zhang 2016-09-06 8:55 ` [PATCH 2/3] arm64: dts: berlin4ct-stb: add missing unit name to /memory node Jisheng Zhang @ 2016-09-06 8:55 ` Jisheng Zhang 2 siblings, 0 replies; 8+ messages in thread From: Jisheng Zhang @ 2016-09-06 8:55 UTC (permalink / raw) To: sebastian.hesselbarth, robh+dt, mark.rutland, catalin.marinas, will.deacon Cc: linux-arm-kernel, devicetree, linux-kernel, Jisheng Zhang This patch fixes the following DTC warning with W=1: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts b/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts index 0d70d39..fae6c69 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts +++ b/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts @@ -54,7 +54,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@1000000 { device_type = "memory"; /* the first 16MB is for firmwares' usage */ reg = <0 0x01000000 0 0x7f000000>; -- 2.9.3 ^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-09-06 16:05 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-09-06 8:55 [PATCH 0/3] arm64: dts: berlin: fix dtc warnings Jisheng Zhang 2016-09-06 8:55 ` [PATCH 1/3] arm64: dts: berlin4ct: add missing unit name to /soc node Jisheng Zhang 2016-09-06 10:22 ` Mark Rutland 2016-09-06 10:20 ` Jisheng Zhang 2016-09-06 10:57 ` Mark Rutland 2016-09-06 16:04 ` Stephen Warren 2016-09-06 8:55 ` [PATCH 2/3] arm64: dts: berlin4ct-stb: add missing unit name to /memory node Jisheng Zhang 2016-09-06 8:55 ` [PATCH 3/3] arm64: dts: berlin4ct-dmp: " Jisheng Zhang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).