Re: [PATCH V2 5/5] ARM: dts: exynos5440: support the phy-pcie node for pcie

[Krzysztof Kozlowski <krzk@kernel.org>]

On Wed, Jan 04, 2017 at 09:34:35PM +0900, Jaehoon Chung wrote:
> Add phy-pcie node for using Exynos5440 pcie.
> And use the reg-names as "elbi" and "config".

'and' is only for joining in compound sentences, don't start with it.

> Because the getting configuratioin space address from ranges is old way.

Spell-check please.

> It also is helpful to distinguish more clearly.

Distinguish what? Please work on the commit msg, I am not picking 
> 
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> ---
> Changelog on V2:
> - Removes the child-node
> - Fixes the typo
> - Removes the unnecessary comments
> 
>  arch/arm/boot/dts/exynos5440.dtsi | 34 ++++++++++++++++++++++------------
>  1 file changed, 22 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
> index 2a2e570..feb074d 100644
> --- a/arch/arm/boot/dts/exynos5440.dtsi
> +++ b/arch/arm/boot/dts/exynos5440.dtsi
> @@ -290,11 +290,22 @@
>  		clock-names = "usbhost";
>  	};
>  
> +	pcie_phy0: pcie-phy@270000 {
> +		#phy-cells = <0>;
> +		compatible = "samsung,exynos5440-pcie-phy";
> +		reg = <0x270000 0x1000>, <0x271000 0x40>;
> +	};
> +
> +	pcie_phy1: pcie-phy@272000 {
> +		#phy-cells = <0>;
> +		compatible = "samsung,exynos5440-pcie-phy";
> +		reg = <0x272000 0x1000>, <0x271040 0x40>;
> +	};
> +
>  	pcie_0: pcie@290000 {
>  		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
> -		reg = <0x290000 0x1000
> -			0x270000 0x1000
> -			0x271000 0x40>;
> +		reg = <0x290000 0x1000>, <0x40000000 0x1000>;
> +		reg-names = "elbi", "config";
>  		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
>  			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
>  			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> @@ -303,9 +314,9 @@
>  		#address-cells = <3>;
>  		#size-cells = <2>;
>  		device_type = "pci";
> -		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
> -			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
> -			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
> +		phys = <&pcie_phy0>;
> +		ranges = <0x81000000 0 0	  0x40001000 0 0x00010000
> +			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>;

I think the comments were useful. You can leave them.

>  		#interrupt-cells = <1>;
>  		interrupt-map-mask = <0 0 0 0>;
>  		interrupt-map = <0x0 0 &gic 53>;
> @@ -315,9 +326,8 @@
>  
>  	pcie_1: pcie@2a0000 {
>  		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
> -		reg = <0x2a0000 0x1000
> -			0x272000 0x1000
> -			0x271040 0x40>;
> +		reg = <0x2a0000 0x1000>, <0x60000000 0x1000>;
> +		reg-names = "elbi", "config";
>  		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
>  			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
>  			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> @@ -326,9 +336,9 @@
>  		#address-cells = <3>;
>  		#size-cells = <2>;
>  		device_type = "pci";
> -		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
> -			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
> -			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
> +		phys = <&pcie_phy1>;
> +		ranges = <0x81000000 0 0	  0x60001000 0 0x00010000
> +			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>;

I think the comments were useful. You can leave them.

This looks like depending on the changes in the driver, so I will need a
tag or stable branch from PCIe maintainers.

Best regards,
Krzysztof