* [PATCH 1/4] mfd: arizona: Remove duplicate set of ret variable
@ 2017-01-06 14:11 Charles Keepax
2017-01-06 14:11 ` [PATCH 2/4] mfd: arizona: Display register addresses in hex Charles Keepax
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Charles Keepax @ 2017-01-06 14:11 UTC (permalink / raw)
To: lee.jones; +Cc: patches, linux-kernel
arizona_poll_reg already returns ETIMEDOUT if we don't see the expected
register changes before the time out, so remove pointless local setting of
ETIMEDOUT.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index b6d4bc6..e00f577 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -342,10 +342,8 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona,
ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
ARIZONA_FLL1_CLOCK_OK_STS,
ARIZONA_FLL1_CLOCK_OK_STS);
- if (ret) {
- ret = -ETIMEDOUT;
+ if (ret)
goto err_fll;
- }
ret = regmap_write(arizona->regmap, ARIZONA_SYSTEM_CLOCK_1, 0x0144);
if (ret) {
@@ -407,11 +405,9 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
ARIZONA_WSEQ_BUSY, 0);
- if (ret) {
+ if (ret)
regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
ARIZONA_WSEQ_ABORT);
- ret = -ETIMEDOUT;
- }
err:
err = arizona_disable_freerun_sysclk(arizona, &state);
--
2.1.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/4] mfd: arizona: Display register addresses in hex
2017-01-06 14:11 [PATCH 1/4] mfd: arizona: Remove duplicate set of ret variable Charles Keepax
@ 2017-01-06 14:11 ` Charles Keepax
2017-01-06 14:11 ` [PATCH 3/4] mfd: arizona: Update arizona_poll_reg to take a timeout in milliseconds Charles Keepax
2017-01-06 14:11 ` [PATCH v2 4/4] mfd: arizona: Use regmap_read_poll_timeout instead of hard coding it Charles Keepax
2 siblings, 0 replies; 5+ messages in thread
From: Charles Keepax @ 2017-01-06 14:11 UTC (permalink / raw)
To: lee.jones; +Cc: patches, linux-kernel
Register addresses are normally displayed in hex throughout the Arizona
driver. Update the arizona_poll_reg function to follow this convention.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index e00f577..4cb34c3 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -245,7 +245,7 @@ static int arizona_poll_reg(struct arizona *arizona,
for (i = 0; i < timeout; i++) {
ret = regmap_read(arizona->regmap, reg, &val);
if (ret != 0) {
- dev_err(arizona->dev, "Failed to read reg %u: %d\n",
+ dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
reg, ret);
continue;
}
@@ -256,7 +256,7 @@ static int arizona_poll_reg(struct arizona *arizona,
usleep_range(1000, 5000);
}
- dev_err(arizona->dev, "Polling reg %u timed out: %x\n", reg, val);
+ dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
return -ETIMEDOUT;
}
--
2.1.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 3/4] mfd: arizona: Update arizona_poll_reg to take a timeout in milliseconds
2017-01-06 14:11 [PATCH 1/4] mfd: arizona: Remove duplicate set of ret variable Charles Keepax
2017-01-06 14:11 ` [PATCH 2/4] mfd: arizona: Display register addresses in hex Charles Keepax
@ 2017-01-06 14:11 ` Charles Keepax
2017-01-06 14:19 ` Charles Keepax
2017-01-06 14:11 ` [PATCH v2 4/4] mfd: arizona: Use regmap_read_poll_timeout instead of hard coding it Charles Keepax
2 siblings, 1 reply; 5+ messages in thread
From: Charles Keepax @ 2017-01-06 14:11 UTC (permalink / raw)
To: lee.jones; +Cc: patches, linux-kernel
Currently, we specify the timeout in terms of the number of polls but it
is more clear from a user of the functions perspective to specify the
timeout directly in milliseconds, as such update the function to these new
semantics.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 4cb34c3..1307294 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -235,14 +235,18 @@ static irqreturn_t arizona_overclocked(int irq, void *data)
return IRQ_HANDLED;
}
+#define ARIZONA_REG_POLL_DELAY_MS 5
+
static int arizona_poll_reg(struct arizona *arizona,
- int timeout, unsigned int reg,
+ int timeout_ms, unsigned int reg,
unsigned int mask, unsigned int target)
{
+ unsigned int npolls = (timeout_ms + ARIZONA_REG_POLL_DELAY_MS - 1) /
+ ARIZONA_REG_POLL_DELAY_MS;
unsigned int val = 0;
int ret, i;
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < npolls; i++) {
ret = regmap_read(arizona->regmap, reg, &val);
if (ret != 0) {
dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
@@ -253,7 +257,8 @@ static int arizona_poll_reg(struct arizona *arizona,
if ((val & mask) == target)
return 0;
- usleep_range(1000, 5000);
+ usleep_range((ARIZONA_REG_POLL_DELAY_MS * 1000) / 2,
+ ARIZONA_REG_POLL_DELAY_MS);
}
dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
@@ -269,7 +274,7 @@ static int arizona_wait_for_boot(struct arizona *arizona)
* we won't race with the interrupt handler as it'll be blocked on
* runtime resume.
*/
- ret = arizona_poll_reg(arizona, 5, ARIZONA_INTERRUPT_RAW_STATUS_5,
+ ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
if (!ret)
@@ -339,7 +344,7 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona,
ret);
return ret;
}
- ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
+ ret = arizona_poll_reg(arizona, 125, ARIZONA_INTERRUPT_RAW_STATUS_5,
ARIZONA_FLL1_CLOCK_OK_STS,
ARIZONA_FLL1_CLOCK_OK_STS);
if (ret)
@@ -403,7 +408,7 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
goto err;
}
- ret = arizona_poll_reg(arizona, 5, ARIZONA_WRITE_SEQUENCER_CTRL_1,
+ ret = arizona_poll_reg(arizona, 25, ARIZONA_WRITE_SEQUENCER_CTRL_1,
ARIZONA_WSEQ_BUSY, 0);
if (ret)
regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
--
2.1.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 4/4] mfd: arizona: Use regmap_read_poll_timeout instead of hard coding it
2017-01-06 14:11 [PATCH 1/4] mfd: arizona: Remove duplicate set of ret variable Charles Keepax
2017-01-06 14:11 ` [PATCH 2/4] mfd: arizona: Display register addresses in hex Charles Keepax
2017-01-06 14:11 ` [PATCH 3/4] mfd: arizona: Update arizona_poll_reg to take a timeout in milliseconds Charles Keepax
@ 2017-01-06 14:11 ` Charles Keepax
2 siblings, 0 replies; 5+ messages in thread
From: Charles Keepax @ 2017-01-06 14:11 UTC (permalink / raw)
To: lee.jones; +Cc: patches, linux-kernel
arizona_poll_reg essentially hard-codes regmap_read_poll_timeout, this
patch updates the implementation to use regmap_read_poll_timeout. We
still keep arizona_poll_reg around as regmap_read_poll_timeout is a
macro so rather than expand this for each caller keep it wrapped in
arizona_poll_reg.
Whilst we are doing this make the timeouts a little more generous as the
previous system had a bit more slack as it was done as a delay per
iteration of the loop whereas regmap_read_poll_timeout compares ktime's.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
Changes since v1:
- API updated to take a total time out rather than the number of
polls of the register that should be done.
Thanks,
Charles
drivers/mfd/arizona-core.c | 37 ++++++++++++++-----------------------
1 file changed, 14 insertions(+), 23 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 1307294..75488e6 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -235,34 +235,25 @@ static irqreturn_t arizona_overclocked(int irq, void *data)
return IRQ_HANDLED;
}
-#define ARIZONA_REG_POLL_DELAY_MS 5
+#define ARIZONA_REG_POLL_DELAY_US 7500
static int arizona_poll_reg(struct arizona *arizona,
int timeout_ms, unsigned int reg,
unsigned int mask, unsigned int target)
{
- unsigned int npolls = (timeout_ms + ARIZONA_REG_POLL_DELAY_MS - 1) /
- ARIZONA_REG_POLL_DELAY_MS;
unsigned int val = 0;
- int ret, i;
-
- for (i = 0; i < npolls; i++) {
- ret = regmap_read(arizona->regmap, reg, &val);
- if (ret != 0) {
- dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
- reg, ret);
- continue;
- }
-
- if ((val & mask) == target)
- return 0;
+ int ret;
- usleep_range((ARIZONA_REG_POLL_DELAY_MS * 1000) / 2,
- ARIZONA_REG_POLL_DELAY_MS);
- }
+ ret = regmap_read_poll_timeout(arizona->regmap,
+ ARIZONA_INTERRUPT_RAW_STATUS_5, val,
+ ((val & mask) == target),
+ ARIZONA_REG_POLL_DELAY_US,
+ timeout_ms * 1000);
+ if (ret)
+ dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n",
+ reg, val);
- dev_err(arizona->dev, "Polling reg 0x%x timed out: %x\n", reg, val);
- return -ETIMEDOUT;
+ return ret;
}
static int arizona_wait_for_boot(struct arizona *arizona)
@@ -274,7 +265,7 @@ static int arizona_wait_for_boot(struct arizona *arizona)
* we won't race with the interrupt handler as it'll be blocked on
* runtime resume.
*/
- ret = arizona_poll_reg(arizona, 25, ARIZONA_INTERRUPT_RAW_STATUS_5,
+ ret = arizona_poll_reg(arizona, 30, ARIZONA_INTERRUPT_RAW_STATUS_5,
ARIZONA_BOOT_DONE_STS, ARIZONA_BOOT_DONE_STS);
if (!ret)
@@ -344,7 +335,7 @@ static int arizona_enable_freerun_sysclk(struct arizona *arizona,
ret);
return ret;
}
- ret = arizona_poll_reg(arizona, 125, ARIZONA_INTERRUPT_RAW_STATUS_5,
+ ret = arizona_poll_reg(arizona, 180, ARIZONA_INTERRUPT_RAW_STATUS_5,
ARIZONA_FLL1_CLOCK_OK_STS,
ARIZONA_FLL1_CLOCK_OK_STS);
if (ret)
@@ -408,7 +399,7 @@ static int wm5102_apply_hardware_patch(struct arizona *arizona)
goto err;
}
- ret = arizona_poll_reg(arizona, 25, ARIZONA_WRITE_SEQUENCER_CTRL_1,
+ ret = arizona_poll_reg(arizona, 30, ARIZONA_WRITE_SEQUENCER_CTRL_1,
ARIZONA_WSEQ_BUSY, 0);
if (ret)
regmap_write(arizona->regmap, ARIZONA_WRITE_SEQUENCER_CTRL_0,
--
2.1.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 3/4] mfd: arizona: Update arizona_poll_reg to take a timeout in milliseconds
2017-01-06 14:11 ` [PATCH 3/4] mfd: arizona: Update arizona_poll_reg to take a timeout in milliseconds Charles Keepax
@ 2017-01-06 14:19 ` Charles Keepax
0 siblings, 0 replies; 5+ messages in thread
From: Charles Keepax @ 2017-01-06 14:19 UTC (permalink / raw)
To: lee.jones; +Cc: patches, linux-kernel
On Fri, Jan 06, 2017 at 02:11:35PM +0000, Charles Keepax wrote:
> Currently, we specify the timeout in terms of the number of polls but it
> is more clear from a user of the functions perspective to specify the
> timeout directly in milliseconds, as such update the function to these new
> semantics.
>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
> drivers/mfd/arizona-core.c | 17 +++++++++++------
> 1 file changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index 4cb34c3..1307294 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -235,14 +235,18 @@ static irqreturn_t arizona_overclocked(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> +#define ARIZONA_REG_POLL_DELAY_MS 5
> +
> static int arizona_poll_reg(struct arizona *arizona,
> - int timeout, unsigned int reg,
> + int timeout_ms, unsigned int reg,
> unsigned int mask, unsigned int target)
> {
> + unsigned int npolls = (timeout_ms + ARIZONA_REG_POLL_DELAY_MS - 1) /
> + ARIZONA_REG_POLL_DELAY_MS;
> unsigned int val = 0;
> int ret, i;
>
> - for (i = 0; i < timeout; i++) {
> + for (i = 0; i < npolls; i++) {
> ret = regmap_read(arizona->regmap, reg, &val);
> if (ret != 0) {
> dev_err(arizona->dev, "Failed to read reg 0x%x: %d\n",
> @@ -253,7 +257,8 @@ static int arizona_poll_reg(struct arizona *arizona,
> if ((val & mask) == target)
> return 0;
>
> - usleep_range(1000, 5000);
> + usleep_range((ARIZONA_REG_POLL_DELAY_MS * 1000) / 2,
> + ARIZONA_REG_POLL_DELAY_MS);
Oops sorry let me send another version missing a * 1000 here.
Thanks,
Charles
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-01-06 14:19 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-06 14:11 [PATCH 1/4] mfd: arizona: Remove duplicate set of ret variable Charles Keepax
2017-01-06 14:11 ` [PATCH 2/4] mfd: arizona: Display register addresses in hex Charles Keepax
2017-01-06 14:11 ` [PATCH 3/4] mfd: arizona: Update arizona_poll_reg to take a timeout in milliseconds Charles Keepax
2017-01-06 14:19 ` Charles Keepax
2017-01-06 14:11 ` [PATCH v2 4/4] mfd: arizona: Use regmap_read_poll_timeout instead of hard coding it Charles Keepax
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).