Re: [PATCH 3/3] Documentation: add Actions S900 clock bindings

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Wed, Nov 01, 2017 at 07:04:48PM -0500, Rob Herring wrote:
> On Wed, Nov 01, 2017 at 01:24:23AM +0530, Manivannan Sadhasivam wrote:
> > This patch adds clock bindings for Actions Semi S900 SoC.
> 
> "dt-bindings: clock: " for the subject.
> 
> This patch should come before the dts and driver changes.
>
Ack. Will incorporate in next revision.

Thanks,
Mani 
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  .../bindings/clock/actions,s900-clock.txt          | 47 ++++++++++++++++++++++
> >  1 file changed, 47 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/actions,s900-clock.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/actions,s900-clock.txt b/Documentation/devicetree/bindings/clock/actions,s900-clock.txt
> > new file mode 100644
> > index 0000000..951d6ad
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/actions,s900-clock.txt
> > @@ -0,0 +1,47 @@
> > +* Actions s900 Clock Controller
> > +
> > +The Actions s900 clock controller generates and supplies clock to various
> > +controllers within the SoC. The clock binding described here is applicable to
> > +s900 SoC.
> > +
> > +Required Properties:
> > +
> > +- compatible: should be "actions,s900-clock"
> > +- reg: physical base address of the controller and length of memory mapped
> > +  region.
> > +- #clock-cells: should be 1.
> > +
> > +Each clock is assigned an identifier and client nodes can use this identifier
> > +to specify the clock which they consume.
> > +
> > +All available clocks are defined as preprocessor macros in
> > +dt-bindings/clock/actions,s900-clock.h header and can be used in device
> > +tree sources.
> > +
> > +External clocks:
> > +
> > +The hosc clock used as input for the plls is generated outside the SoC. It is
> > +expected that it is defined using standard clock bindings as "hosc".
> > +
> > +Actions s900 Clock Controller also require two more clocks:
> > + - "losc" - internal low frequency oscillator
> > + - "diff_24M" - internal differential 24MHz clock
> > +
> > +Example: Clock controller node:
> > +
> > +        clock: clock-controller@e0160000 {
> > +		compatible = "actions,s900-clock";
> > +		reg = <0 0xe0160000 0 0x1000>;
> > +		#clock-cells = <1>;
> > +	};
> > +
> > +Example: UART controller node that consumes clock generated by the clock
> > +controller:
> > +
> > +	serial5: uart@e012a000 {
> 
> serial@...
> 
> > +		compatible = "actions,s900-uart", "actions,owl-uart";
> > +		reg = <0x0 0xe012a000 0x0 0x2000>;
> > +		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&clock CLK_UART5>;
> > +		clock-names = "uart";
> > +	};
> > -- 
> > 2.7.4
> >