From: Niklas Cassel <niklas.cassel@axis.com>
To: linux-arm-kernel@axis.com, linux-pci@vger.kernel.org,
linux-omap@vger.kernel.org
Cc: Niklas Cassel <niklass@axis.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 00/17] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support
Date: Fri, 3 Nov 2017 14:47:04 +0100 [thread overview]
Message-ID: <20171103134722.5532-1-niklas.cassel@axis.com> (raw)
This is a series that adds:
- PCI endpoint mode support in the ARTPEC-6 driver.
- ARTPEC-7 SoC support in the ARTPEC-6 driver (the SoCs are very similar).
- Small fixes for MSI in designware-ep and designware-host,
needed to get endpoint mode support working for ARTPEC-6.
- Cleanups in pci-dra7xx to better prepare for endpoint mode in other
DWC based PCIe drivers.
New in V4:
Fixed all commit messages so that they are readable without the title.
Replaced ifdefs in pci-dra7xx and pcie-artpec6 by using the
IS_ENABLED macro. (Thanks Arnd!)
Niklas Cassel (17):
PCI: dwc: Use the DMA-API to get the MSI address
PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits
PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be
writable
PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init
PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar()
PCI: designware-ep: Add generic function for raising MSI irq
PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep
mode
PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than
in probe
PCI: dwc: dra7xx: Help compiler to remove unused code
PCI: dwc: artpec6: Remove unused defines
PCI: dwc: artpec6: Use BIT and GENMASK macros
PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller
functions
bindings: PCI: artpec: Add support for endpoint mode
PCI: dwc: artpec6: Add support for endpoint mode
PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument
bindings: PCI: artpec: Add support for the ARTPEC-7 SoC
PCI: dwc: artpec6: Add support for the ARTPEC-7 SoC
.../devicetree/bindings/pci/axis,artpec6-pcie.txt | 5 +-
drivers/pci/dwc/Kconfig | 68 ++--
drivers/pci/dwc/Makefile | 4 +-
drivers/pci/dwc/pci-dra7xx.c | 27 +-
drivers/pci/dwc/pcie-artpec6.c | 406 ++++++++++++++++++---
drivers/pci/dwc/pcie-designware-ep.c | 58 ++-
drivers/pci/dwc/pcie-designware-host.c | 15 +-
drivers/pci/dwc/pcie-designware.c | 2 +-
drivers/pci/dwc/pcie-designware.h | 22 +-
9 files changed, 504 insertions(+), 103 deletions(-)
--
2.14.2
next reply other threads:[~2017-11-03 13:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-03 13:47 Niklas Cassel [this message]
2017-11-03 13:47 ` [PATCH v4 01/17] PCI: dwc: Use the DMA-API to get the MSI address Niklas Cassel
2017-11-08 0:56 ` Bjorn Helgaas
2017-11-08 12:45 ` Joao Pinto
2017-11-08 17:27 ` Bjorn Helgaas
2017-11-09 9:20 ` Niklas Cassel
2017-11-21 12:18 ` Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 02/17] PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 03/17] PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 04/17] PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 05/17] PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 06/17] PCI: designware-ep: Add generic function for raising MSI irq Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 07/17] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 08/17] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 09/17] PCI: dwc: dra7xx: Help compiler to remove unused code Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 10/17] PCI: dwc: artpec6: Remove unused defines Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 11/17] PCI: dwc: artpec6: Use BIT and GENMASK macros Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 12/17] PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller functions Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 13/17] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 14/17] PCI: dwc: artpec6: " Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 15/17] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 16/17] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
2017-11-03 13:47 ` [PATCH v4 17/17] PCI: dwc: artpec6: " Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171103134722.5532-1-niklas.cassel@axis.com \
--to=niklas.cassel@axis.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@axis.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=niklass@axis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).