LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH 11/13] MIPS: mscc: add ocelot PCB123 device tree
Date: Tue, 28 Nov 2017 16:26:41 +0100
Message-ID: <20171128152643.20463-12-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <20171128152643.20463-1-alexandre.belloni@free-electrons.com>

Add a device tree for the Microsemi Ocelot PCB123 evaluation board.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/mips/boot/dts/mscc/Makefile          |  2 ++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 30 ++++++++++++++++++++++++++++++
 2 files changed, 32 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts

diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
index f0a155a74e02..09a1c4b97de2 100644
--- a/arch/mips/boot/dts/mscc/Makefile
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -1,3 +1,5 @@
+dtb-$(CONFIG_MSCC_OCELOT)	+= ocelot_pcb123.dtb
+
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
 # Force kbuild to make empty built-in.o if necessary
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
new file mode 100644
index 000000000000..16a67ad2901d
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2017 Microsemi Corporation
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+
+#include "ocelot.dtsi"
+
+/ {
+	compatible = "mscc,ocelot-pcb123", "mscc,ocelot";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0e000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
-- 
2.15.0

  parent reply index

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-28 15:26 [PATCH 00/13] MIPS: add support for the Microsemi MIPS SoCs Alexandre Belloni
2017-11-28 15:26 ` [PATCH 01/13] dt-bindings: Add vendor prefix for Microsemi Corporation Alexandre Belloni
2017-11-28 16:10   ` James Hogan
2017-11-28 16:22     ` Alexandre Belloni
2017-12-01  1:14       ` Rob Herring
2017-11-28 15:26 ` [PATCH 02/13] dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller Alexandre Belloni
2017-12-01  1:15   ` Rob Herring
2017-11-28 15:26 ` [PATCH 03/13] irqchip: Add a driver for the Microsemi Ocelot controller Alexandre Belloni
2017-11-28 15:26 ` [PATCH 04/13] dt-bindings: pinctrl: Add bindings for Microsemi Ocelot Alexandre Belloni
2017-12-01  1:16   ` Rob Herring
2017-11-28 15:26 ` [PATCH 05/13] pinctrl: Add Microsemi Ocelot SoC driver Alexandre Belloni
2017-11-28 15:26 ` [PATCH 06/13] dt-bindings: power: reset: Document ocelot-reset binding Alexandre Belloni
2017-12-01  1:54   ` Rob Herring
2017-11-28 15:26 ` [PATCH 07/13] power: reset: Add a driver for the Microsemi Ocelot reset Alexandre Belloni
2017-11-28 15:26 ` [PATCH 08/13] dt-bindings: mips: Add bindings for Microsemi SoCs Alexandre Belloni
2017-11-28 19:14   ` Florian Fainelli
2017-11-28 15:26 ` [PATCH 09/13] MIPS: mscc: Add initial support for Microsemi MIPS SoCs Alexandre Belloni
2017-11-28 16:01   ` James Hogan
2017-11-28 16:53     ` Alexandre Belloni
2017-11-28 17:31       ` James Hogan
2017-11-28 19:50         ` Paul Burton
2017-11-29 16:38           ` Alexandre Belloni
2018-01-17 23:58             ` James Hogan
2018-03-02 15:22               ` Alexandre Belloni
2017-11-28 15:26 ` [PATCH 10/13] MIPS: mscc: add ocelot dtsi Alexandre Belloni
2017-11-28 18:40   ` Florian Fainelli
2017-11-28 15:26 ` Alexandre Belloni [this message]
2017-11-28 15:26 ` [PATCH 12/13] MIPS: defconfigs: add a defconfig for Microsemi SoCs Alexandre Belloni
2017-11-28 15:26 ` [PATCH 13/13] MAINTAINERS: Add entry for Microsemi MIPS SoCs Alexandre Belloni
2017-11-28 15:34   ` Joe Perches
2017-11-28 15:44     ` Alexandre Belloni

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171128152643.20463-12-alexandre.belloni@free-electrons.com \
    --to=alexandre.belloni@free-electrons.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git