From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: "David S . Miller" <davem@davemloft.net>
Cc: Allan Nielsen <Allan.Nielsen@microsemi.com>,
razvan.stefanescu@nxp.com, po.liu@nxp.com,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
James Hogan <jhogan@kernel.org>
Subject: [PATCH net-next 0/8] Microsemi Ocelot switch support
Date: Fri, 23 Mar 2018 21:11:09 +0100 [thread overview]
Message-ID: <20180323201117.8416-1-alexandre.belloni@bootlin.com> (raw)
Hi,
This series adds initial support for the Microsemi Ethernet switch
present on Ocelot SoCs.
This only has bridging (and STP) support for now and it uses the
switchdev framework.
Coming features are VLAN filtering, link aggregation, IGMP snooping.
The switch can also be connected to an external CPU using PCIe. I have a
PoC for that but it is still a bit clunky.
Also, support for integration on other SoCs will be submitted.
The ocelot dts changes are here for reference and should probably go
through the MIPS tree once the bindings are accepted.
Cc: James Hogan <jhogan@kernel.org>
Alexandre Belloni (8):
net: phy: Add initial support for Microsemi Ocelot internal PHYs.
dt-bindings: net: add DT bindings for Microsemi MIIM
net: mscc: Add MDIO driver
dt-bindings: net: add DT bindings for Microsemi Ocelot Switch
net: mscc: Add initial Ocelot switch support
MIPS: mscc: Add switch to ocelot
MIPS: mscc: connect phys to ports on ocelot_pcb123
MAINTAINERS: Add entry for Microsemi Ethernet switches
.../devicetree/bindings/net/mscc-miim.txt | 25 +
.../devicetree/bindings/net/mscc-ocelot.txt | 62 +
MAINTAINERS | 6 +
arch/mips/boot/dts/mscc/ocelot.dtsi | 84 ++
arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 16 +
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/mscc/Kconfig | 36 +
drivers/net/ethernet/mscc/Makefile | 6 +
drivers/net/ethernet/mscc/mscc_miim.c | 210 +++
drivers/net/ethernet/mscc/ocelot.c | 1346 ++++++++++++++++++++
drivers/net/ethernet/mscc/ocelot.h | 554 ++++++++
drivers/net/ethernet/mscc/ocelot_ana.h | 625 +++++++++
drivers/net/ethernet/mscc/ocelot_board.c | 329 +++++
drivers/net/ethernet/mscc/ocelot_dev.h | 275 ++++
drivers/net/ethernet/mscc/ocelot_dev_gmii.h | 154 +++
drivers/net/ethernet/mscc/ocelot_hsio.h | 785 ++++++++++++
drivers/net/ethernet/mscc/ocelot_io.c | 116 ++
drivers/net/ethernet/mscc/ocelot_qs.h | 78 ++
drivers/net/ethernet/mscc/ocelot_qsys.h | 270 ++++
drivers/net/ethernet/mscc/ocelot_regs.c | 399 ++++++
drivers/net/ethernet/mscc/ocelot_rew.h | 81 ++
drivers/net/ethernet/mscc/ocelot_sys.h | 140 ++
drivers/net/phy/mscc.c | 15 +
24 files changed, 5614 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/mscc-miim.txt
create mode 100644 Documentation/devicetree/bindings/net/mscc-ocelot.txt
create mode 100644 drivers/net/ethernet/mscc/Kconfig
create mode 100644 drivers/net/ethernet/mscc/Makefile
create mode 100644 drivers/net/ethernet/mscc/mscc_miim.c
create mode 100644 drivers/net/ethernet/mscc/ocelot.c
create mode 100644 drivers/net/ethernet/mscc/ocelot.h
create mode 100644 drivers/net/ethernet/mscc/ocelot_ana.h
create mode 100644 drivers/net/ethernet/mscc/ocelot_board.c
create mode 100644 drivers/net/ethernet/mscc/ocelot_dev.h
create mode 100644 drivers/net/ethernet/mscc/ocelot_dev_gmii.h
create mode 100644 drivers/net/ethernet/mscc/ocelot_hsio.h
create mode 100644 drivers/net/ethernet/mscc/ocelot_io.c
create mode 100644 drivers/net/ethernet/mscc/ocelot_qs.h
create mode 100644 drivers/net/ethernet/mscc/ocelot_qsys.h
create mode 100644 drivers/net/ethernet/mscc/ocelot_regs.c
create mode 100644 drivers/net/ethernet/mscc/ocelot_rew.h
create mode 100644 drivers/net/ethernet/mscc/ocelot_sys.h
--
2.16.2
next reply other threads:[~2018-03-23 20:11 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-23 20:11 Alexandre Belloni [this message]
2018-03-23 20:11 ` [PATCH net-next 1/8] net: phy: Add initial support for Microsemi Ocelot internal PHYs Alexandre Belloni
2018-03-23 20:29 ` Andrew Lunn
2018-03-23 21:08 ` Florian Fainelli
2018-03-28 16:18 ` Alexandre Belloni
2018-03-23 20:11 ` [PATCH net-next 2/8] dt-bindings: net: add DT bindings for Microsemi MIIM Alexandre Belloni
2018-03-23 21:46 ` Florian Fainelli
2018-03-23 20:11 ` [PATCH net-next 3/8] net: mscc: Add MDIO driver Alexandre Belloni
2018-03-23 20:49 ` Andrew Lunn
2018-03-29 14:05 ` Alexandre Belloni
2018-03-29 14:40 ` Andrew Lunn
2018-03-29 14:53 ` Alexandre Belloni
2018-03-29 14:57 ` Andrew Lunn
2018-03-23 21:51 ` Florian Fainelli
2018-03-29 14:14 ` Alexandre Belloni
2018-03-23 20:11 ` [PATCH net-next 4/8] dt-bindings: net: add DT bindings for Microsemi Ocelot Switch Alexandre Belloni
2018-03-23 21:01 ` Andrew Lunn
2018-03-23 21:11 ` Florian Fainelli
2018-03-26 22:25 ` Rob Herring
2018-03-26 22:50 ` Andrew Lunn
2018-03-27 0:34 ` Rob Herring
2018-03-26 22:25 ` Rob Herring
2018-03-23 20:11 ` [PATCH net-next 5/8] net: mscc: Add initial Ocelot switch support Alexandre Belloni
2018-03-23 21:25 ` Andrew Lunn
2018-03-23 21:41 ` Florian Fainelli
2018-03-30 12:45 ` Alexandre Belloni
2018-03-30 13:54 ` Andrew Lunn
2018-03-30 14:16 ` Alexandre Belloni
2018-03-30 14:50 ` Andrew Lunn
2018-03-31 22:47 ` Florian Fainelli
2018-04-24 18:52 ` Alexandre Belloni
2018-03-26 19:13 ` kbuild test robot
2018-03-30 7:02 ` Razvan Stefanescu
2018-03-23 20:11 ` [PATCH net-next 6/8] MIPS: mscc: Add switch to ocelot Alexandre Belloni
2018-03-23 21:17 ` Florian Fainelli
2018-03-23 21:22 ` Alexandre Belloni
2018-03-23 21:33 ` Andrew Lunn
2018-03-23 21:44 ` Florian Fainelli
2018-03-23 22:06 ` Andrew Lunn
2018-03-23 22:11 ` Florian Fainelli
2018-03-24 14:48 ` Andrew Lunn
2018-03-23 20:11 ` [PATCH net-next 7/8] MIPS: mscc: connect phys to ports on ocelot_pcb123 Alexandre Belloni
2018-03-23 20:11 ` [PATCH net-next 8/8] MAINTAINERS: Add entry for Microsemi Ethernet switches Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180323201117.8416-1-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=Allan.Nielsen@microsemi.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=jhogan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=netdev@vger.kernel.org \
--cc=po.liu@nxp.com \
--cc=razvan.stefanescu@nxp.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).