* PROBLEM: Keyboard not responding after resuming from suspend/hibernate @ 2018-08-31 18:53 Numan Demirdöğen 2018-08-31 19:16 ` Peter Zijlstra ` (2 more replies) 0 siblings, 3 replies; 13+ messages in thread From: Numan Demirdöğen @ 2018-08-31 18:53 UTC (permalink / raw) To: peterz; +Cc: mingo, linux-kernel If I put laptop to suspend or hibernate by closing lid, power manager or any other method and then I resume/wake up laptop, keyboard is not responding. My laptop is a Sony Vaio VPCEH2F1E. Steps to produce bug: 1. Boot 2. Put laptop to sleep 3. Resume What I expect to happen: Keyboard responds to key press. What happens: Keyboard does not respond but mouse and trackball are working. git bisect point 9d659ae14b545c4296e812c70493bfdc999b5c1c as the first bad commit. Bad commit link: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=9d659ae14b545c4296e812c70493bfdc999b5c1c Link to actual bug report: https://bugzilla.kernel.org/show_bug.cgi?id=195471 awk -f ver_linux Linux korsan 4.18.5-arch1-1-ARCH #1 SMP PREEMPT Fri Aug 24 12:48:58 UTC 2018 x86_64 GNU/Linux GNU C 8.2.0 GNU Make 4.2.1 Binutils 2.31.1 Util-linux 2.32.1 Mount 2.32.1 Module-init-tools 25 E2fsprogs 1.44.4 Jfsutils 1.1.15 Reiserfsprogs 3.6.27 Xfsprogs 4.17.0 Pcmciautils 018 Linux C Library 2.28 Dynamic linker (ldd) 2.28 Linux C++ Library 6.0.25 Procps 3.3.15 Kbd 2.0.4 Console-tools 2.0.4 Sh-utils 8.29 Udev 239 Wireless-tools 30 Modules Loaded ac agpgart ahci arc4 ath ath3k ath9k ath9k_common ath9k_hw atkbd battery bluetooth bpfilter ccm cdrom cfg80211 coretemp crc16 crc32c_generic crc32c_intel crc32_pclmul crct10dif_pclmul cryptd drm drm_kms_helper ecdh_generic ehci_hcd ehci_pci evdev ext4 fb_sys_fops fscrypto fuse ghash_clmulni_intel gpio_ich hid hid_generic i2c_algo_bit i2c_i801 i8042 i915 input_leds intel_cstate intel_gtt intel_powerclamp intel_rapl intel_rapl_perf intel_uncore iptable_filter iptable_mangle iptable_nat ip_tables irqbypass iTCO_vendor_support iTCO_wdt jbd2 kvm kvm_intel led_class libahci libata libcrc32c libps2 lpc_ich mac80211 mac_hid mbcache mei mei_me mousedev msr nf_conntrack nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat nf_nat_ipv4 pcc_cpufreq psmouse rfkill rtc_cmos scsi_mod sd_mod serio serio_raw snd snd_hda_codec snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_core snd_hda_intel snd_hwdep snd_pcm snd_timer sony_laptop soundcore sr_mod syscopyarea sysfillrect sysimgblt usb_common usbcore usbhid x86_pkg_temp_thermal x_tables dmesg | grep i8042 [ 0.574078] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.575936] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.576143] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.618880] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 11.248435] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input5 cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 8 0 0 0 IO-APIC 2-edge timer 1: 0 0 0 10286 IO-APIC 1-edge i8042 8: 0 0 0 1 IO-APIC 8-edge rtc0 9: 0 9479 0 0 IO-APIC 9-fasteoi acpi 12: 0 0 370114 0 IO-APIC 12-edge i8042 16: 197457 0 0 0 IO-APIC 16-fasteoi ehci_hcd:usb1, ath9k 19: 0 0 0 0 IO-APIC 19-fasteoi i801_smbus 23: 0 0 71055 0 IO-APIC 23-fasteoi ehci_hcd:usb2 24: 0 74549 0 0 PCI-MSI 512000-edge ahci[0000:00:1f.2] 25: 0 14 0 0 PCI-MSI 360448-edge mei_me 26: 0 0 138870 0 PCI-MSI 32768-edge i915 27: 0 0 0 330 PCI-MSI 442368-edge snd_hda_intel:card0 NMI: 24 22 25 21 Non-maskable interrupts LOC: 534734 446934 603337 440320 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts PMI: 24 22 25 21 Performance monitoring interrupts IWI: 26 12 43115 22 IRQ work interrupts RTR: 0 0 0 0 APIC ICR read retries RES: 95282 76970 60242 46409 Rescheduling interrupts CAL: 66746 75300 70554 69119 Function call interrupts TLB: 50929 54528 51413 48017 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts DFR: 0 0 0 0 Deferred Error APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 18 19 19 19 Machine check polls HYP: 0 0 0 0 Hypervisor callback interrupts HRE: 0 0 0 0 Hyper-V reenlightenment interrupts HVS: 0 0 0 0 Hyper-V stimer0 interrupts ERR: 0 MIS: 0 PIN: 0 0 0 0 Posted-interrupt notification event NPI: 0 0 0 0 Nested posted-interrupt event PIW: 0 0 0 0 Posted-interrupt wakeup event P.S: My native language is not English. -- Numan Demirdöğen ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PROBLEM: Keyboard not responding after resuming from suspend/hibernate 2018-08-31 18:53 PROBLEM: Keyboard not responding after resuming from suspend/hibernate Numan Demirdöğen @ 2018-08-31 19:16 ` Peter Zijlstra 2018-08-31 19:38 ` Numan Demirdöğen 2018-09-03 8:53 ` Numan Demirdöğen 2018-10-19 7:20 ` Fw: " Numan Demirdöğen 2 siblings, 1 reply; 13+ messages in thread From: Peter Zijlstra @ 2018-08-31 19:16 UTC (permalink / raw) To: Numan Demirdöğen; +Cc: mingo, linux-kernel, Rafael J. Wysocki On Fri, Aug 31, 2018 at 09:53:11PM +0300, Numan Demirdöğen wrote: > If I put laptop to suspend or hibernate by closing lid, power > manager or any other method and then I resume/wake up laptop, keyboard > is not responding. My laptop is a Sony Vaio VPCEH2F1E. > > Steps to produce bug: > 1. Boot > 2. Put laptop to sleep > 3. Resume > What I expect to happen: Keyboard responds to key press. > What happens: Keyboard does not respond but mouse and trackball are > working. > > git bisect point 9d659ae14b545c4296e812c70493bfdc999b5c1c as the first > bad commit. > > Bad commit link: > https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=9d659ae14b545c4296e812c70493bfdc999b5c1c That doesn't make any kind of sense... if that commit had trouble (oddly there is one another report fingering this) all the mutex locking should be busted (and there is a _lot_ of that in the kernel). I really wouldn't know where to begin debugging this. Suspend/resume isn't really something I know much of, all I can say it that it works on my laptop. Rafael, any idea where to start looking for this? > Link to actual bug report: > https://bugzilla.kernel.org/show_bug.cgi?id=195471 No, _this_ is the actual report, that is a random website you put stuff on. ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PROBLEM: Keyboard not responding after resuming from suspend/hibernate 2018-08-31 19:16 ` Peter Zijlstra @ 2018-08-31 19:38 ` Numan Demirdöğen 0 siblings, 0 replies; 13+ messages in thread From: Numan Demirdöğen @ 2018-08-31 19:38 UTC (permalink / raw) To: Peter Zijlstra; +Cc: mingo, linux-kernel, Rafael J. Wysocki Fri, 31 Aug 2018 21:16:11 +0200 tarihinde Peter Zijlstra <peterz@infradead.org> yazdı: >On Fri, Aug 31, 2018 at 09:53:11PM +0300, Numan Demirdöğen wrote: >> If I put laptop to suspend or hibernate by closing lid, power >> manager or any other method and then I resume/wake up laptop, >> keyboard is not responding. My laptop is a Sony Vaio VPCEH2F1E. >> >> Steps to produce bug: >> 1. Boot >> 2. Put laptop to sleep >> 3. Resume >> What I expect to happen: Keyboard responds to key press. >> What happens: Keyboard does not respond but mouse and trackball are >> working. >> >> git bisect point 9d659ae14b545c4296e812c70493bfdc999b5c1c as the >> first bad commit. >> >> Bad commit link: >> https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=9d659ae14b545c4296e812c70493bfdc999b5c1c Hi, Thank you for looking into this problem! > >That doesn't make any kind of sense... if that commit had trouble >(oddly there is one another report fingering this) all the mutex >locking should be busted (and there is a _lot_ of that in the kernel). So, should I re-run a git bisect in order to confirm whether that commit is the culprit or not? >I really wouldn't know where to begin debugging this. Suspend/resume >isn't really something I know much of, all I can say it that it works >on my laptop. > >Rafael, any idea where to start looking for this? > >> Link to actual bug report: >> https://bugzilla.kernel.org/show_bug.cgi?id=195471 > >No, _this_ is the actual report, that is a random website you put stuff >on. -- Numan Demirdöğen ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PROBLEM: Keyboard not responding after resuming from suspend/hibernate 2018-08-31 18:53 PROBLEM: Keyboard not responding after resuming from suspend/hibernate Numan Demirdöğen 2018-08-31 19:16 ` Peter Zijlstra @ 2018-09-03 8:53 ` Numan Demirdöğen 2018-09-18 18:54 ` Pavel Machek 2018-10-19 7:20 ` Fw: " Numan Demirdöğen 2 siblings, 1 reply; 13+ messages in thread From: Numan Demirdöğen @ 2018-09-03 8:53 UTC (permalink / raw) To: peterz; +Cc: mingo, linux-kernel, rjw Fri, 31 Aug 2018 21:51:21 +0300 tarihinde Numan Demirdöğen <if.gnu.linux@gmail.com> yazdı: >If I put laptop to suspend or hibernate by closing lid, power >manager or any other method and then I resume/wake up laptop, keyboard >is not responding. My laptop is a Sony Vaio VPCEH2F1E. > >Steps to produce bug: >1. Boot >2. Put laptop to sleep >3. Resume > >What I expect to happen: Keyboard responds to key press. >What happens: Keyboard does not respond but mouse and trackball are >working. > >git bisect point 9d659ae14b545c4296e812c70493bfdc999b5c1c as the first >bad commit. > >Bad commit link: >https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=9d659ae14b545c4296e812c70493bfdc999b5c1c > I tried some kernel parameters related to i8042 driver: i8042.debug=1 i8042.reset=1 keyboard not working i8042.debug=1 i8042.kbdreset=1 keyboard not working i8042.debug=1 i8042.nomux=1 keyboard not working i8042.debug=1 i8042.noaux=1 keyboard working, but touchpad not working On some rare occasions, keyboard responds to key press but it remains pressed forever even if I stop pressing it. dmesg output after rebooting with i8042.debug=1 i8042.noaux=1 parameters: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda7 rw raid=noautodetect i8042.debug=1 i8042.noaux=1 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda7 rw raid=noautodetect i8042.debug=1 i8042.noaux=1 [ 0.580463] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.580488] i8042: [0] d1 -> i8042 (command) [ 0.580547] i8042: [0] df -> i8042 (parameter) [ 0.580605] i8042: [0] ff -> i8042 (command) [ 0.580703] i8042: [0] 20 -> i8042 (command) [ 0.580764] i8042: [0] 67 <- i8042 (return) [ 0.580819] i8042: [0] 20 -> i8042 (command) [ 0.580880] i8042: [0] 67 <- i8042 (return) [ 0.580886] i8042: [0] 60 -> i8042 (command) [ 0.580945] i8042: [0] 76 -> i8042 (parameter) [ 0.580979] i8042: [0] 60 -> i8042 (command) [ 0.581195] i8042: [0] 67 -> i8042 (parameter) [ 0.581200] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.606203] i8042: [7] f2 -> i8042 (kbd-data) [ 0.611071] i8042: [9] fa <- i8042 (interrupt, 0, 1) [ 0.612916] i8042: [9] ab <- i8042 (interrupt, 0, 1) [ 0.614775] i8042: [10] 54 <- i8042 (interrupt, 0, 1) [ 0.614785] i8042: [10] f5 -> i8042 (kbd-data) [ 0.616519] i8042: [10] fa <- i8042 (interrupt, 0, 1) [ 0.616525] i8042: [10] ed -> i8042 (kbd-data) [ 0.618267] i8042: [11] fa <- i8042 (interrupt, 0, 1) [ 0.618274] i8042: [11] 00 -> i8042 (kbd-data) [ 0.620036] i8042: [12] fa <- i8042 (interrupt, 0, 1) [ 0.620059] i8042: [12] f3 -> i8042 (kbd-data) [ 0.621871] i8042: [12] fa <- i8042 (interrupt, 0, 1) [ 0.621919] i8042: [12] 00 -> i8042 (kbd-data) [ 0.623655] i8042: [13] fa <- i8042 (interrupt, 0, 1) [ 0.623697] i8042: [13] f4 -> i8042 (kbd-data) [ 0.625453] i8042: [13] fa <- i8042 (interrupt, 0, 1) [ 0.625560] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 20.451122] i8042: [5961] ** <- i8042 (interrupt, 0, 1) [ 20.513500] i8042: [5980] ** <- i8042 (interrupt, 0, 1) [ 20.621249] i8042: [6012] ** <- i8042 (interrupt, 0, 1) [ 20.646198] i8042: [6019] ** <- i8042 (interrupt, 0, 1) [ 20.901351] i8042: [6096] ** <- i8042 (interrupt, 0, 1) [ 21.016251] i8042: [6130] ** <- i8042 (interrupt, 0, 1) [ 21.038582] i8042: [6137] ** <- i8042 (interrupt, 0, 1) [ 21.121771] i8042: [6162] ** <- i8042 (interrupt, 0, 1) [ 21.156715] i8042: [6173] ** <- i8042 (interrupt, 0, 1) [ 21.262759] i8042: [6204] ** <- i8042 (interrupt, 0, 1) [ 21.553194] i8042: [6291] ** <- i8042 (interrupt, 0, 1) [ 21.683803] i8042: [6331] ** <- i8042 (interrupt, 0, 1) [ 22.986045] i8042: [6721] ** <- i8042 (interrupt, 0, 1) [ 23.054660] i8042: [6742] ** <- i8042 (interrupt, 0, 1) [ 23.069845] i8042: [6746] ** <- i8042 (interrupt, 0, 1) [ 23.182136] i8042: [6780] ** <- i8042 (interrupt, 0, 1) [ 23.330160] i8042: [6825] ** <- i8042 (interrupt, 0, 1) [ 23.457594] i8042: [6863] ** <- i8042 (interrupt, 0, 1) [ 25.796205] i8042: [7564] ** <- i8042 (interrupt, 0, 1) [ 25.917439] i8042: [7601] ** <- i8042 (interrupt, 0, 1) [ 26.088318] i8042: [7652] ** <- i8042 (interrupt, 0, 1) [ 26.209582] i8042: [7688] ** <- i8042 (interrupt, 0, 1) [ 26.286913] i8042: [7712] ** <- i8042 (interrupt, 0, 1) [ 26.389433] i8042: [7742] ** <- i8042 (interrupt, 0, 1) [ 26.438691] i8042: [7757] ** <- i8042 (interrupt, 0, 1) [ 26.568241] i8042: [7796] ** <- i8042 (interrupt, 0, 1) [ 26.824402] i8042: [7873] ** <- i8042 (interrupt, 0, 1) [ 26.936696] i8042: [7907] ** <- i8042 (interrupt, 0, 1) [ 26.950851] i8042: [7911] ** <- i8042 (interrupt, 0, 1) [ 27.061062] i8042: [7944] ** <- i8042 (interrupt, 0, 1) [ 27.208063] i8042: [7988] ** <- i8042 (interrupt, 0, 1) [ 27.297467] i8042: [8015] ** <- i8042 (interrupt, 0, 1) [ 27.330314] i8042: [8025] ** <- i8042 (interrupt, 0, 1) [ 27.410375] i8042: [8049] ** <- i8042 (interrupt, 0, 1) [ 27.544863] i8042: [8089] ** <- i8042 (interrupt, 0, 1) [ 27.675444] i8042: [8128] ** <- i8042 (interrupt, 0, 1) [ 28.356760] i8042: [8333] ** <- i8042 (interrupt, 0, 1) [ 28.479062] i8042: [8369] ** <- i8042 (interrupt, 0, 1) [ 28.508559] i8042: [8378] ** <- i8042 (interrupt, 0, 1) [ 28.613285] i8042: [8409] ** <- i8042 (interrupt, 0, 1) [ 28.729994] i8042: [8444] ** <- i8042 (interrupt, 0, 1) [ 28.832510] i8042: [8475] ** <- i8042 (interrupt, 0, 1) [ 40.698088] i8042: [12035] ** <- i8042 (interrupt, 0, 1) [ 40.699985] i8042: [12035] ** <- i8042 (interrupt, 0, 1) [ 40.922791] i8042: [12102] ** <- i8042 (interrupt, 0, 1) [ 40.924653] i8042: [12103] ** <- i8042 (interrupt, 0, 1) [ 40.952840] i8042: [12111] ** <- i8042 (interrupt, 0, 1) [ 40.954699] i8042: [12112] ** <- i8042 (interrupt, 0, 1) [ 40.977819] i8042: [12119] ** <- i8042 (interrupt, 0, 1) [ 40.979724] i8042: [12119] ** <- i8042 (interrupt, 0, 1) [ 41.002735] i8042: [12126] ** <- i8042 (interrupt, 0, 1) [ 41.004598] i8042: [12127] ** <- i8042 (interrupt, 0, 1) [ 41.027718] i8042: [12134] ** <- i8042 (interrupt, 0, 1) [ 41.029578] i8042: [12134] ** <- i8042 (interrupt, 0, 1) [ 41.052662] i8042: [12141] ** <- i8042 (interrupt, 0, 1) [ 41.054506] i8042: [12142] ** <- i8042 (interrupt, 0, 1) [ 41.057850] i8042: [12143] ** <- i8042 (interrupt, 0, 1) [ 41.179495] i8042: [12179] ** <- i8042 (interrupt, 0, 1) [ 41.183089] i8042: [12180] ** <- i8042 (interrupt, 0, 1) [ 41.200876] i8042: [12186] ** <- i8042 (interrupt, 0, 1) [ 43.629878] i8042: [12914] ** <- i8042 (interrupt, 0, 1) [ 43.767772] i8042: [12956] ** <- i8042 (interrupt, 0, 1) [ 43.775446] i8042: [12958] ** <- i8042 (interrupt, 0, 1) [ 43.881105] i8042: [12990] ** <- i8042 (interrupt, 0, 1) [ 43.889816] i8042: [12992] ** <- i8042 (interrupt, 0, 1) [ 43.973641] i8042: [13018] ** <- i8042 (interrupt, 0, 1) [ 44.097788] i8042: [13055] ** <- i8042 (interrupt, 0, 1) [ 44.198245] i8042: [13085] ** <- i8042 (interrupt, 0, 1) [ 44.309915] i8042: [13118] ** <- i8042 (interrupt, 0, 1) [ 44.407663] i8042: [13148] ** <- i8042 (interrupt, 0, 1) [ 44.418704] i8042: [13151] ** <- i8042 (interrupt, 0, 1) [ 44.527887] i8042: [13184] ** <- i8042 (interrupt, 0, 1) [ 44.975360] i8042: [13318] ** <- i8042 (interrupt, 0, 1) [ 44.977214] i8042: [13319] ** <- i8042 (interrupt, 0, 1) [ 45.132347] i8042: [13365] ** <- i8042 (interrupt, 0, 1) [ 45.283080] i8042: [13410] ** <- i8042 (interrupt, 0, 1) [ 45.286627] i8042: [13411] ** <- i8042 (interrupt, 0, 1) [ 45.294125] i8042: [13414] ** <- i8042 (interrupt, 0, 1) [ 45.514934] i8042: [13480] ** <- i8042 (interrupt, 0, 1) [ 45.629938] i8042: [13514] ** <- i8042 (interrupt, 0, 1) [ 45.710391] i8042: [13539] ** <- i8042 (interrupt, 0, 1) [ 45.809808] i8042: [13568] ** <- i8042 (interrupt, 0, 1) [ 45.993201] i8042: [13623] ** <- i8042 (interrupt, 0, 1) [ 46.102365] i8042: [13656] ** <- i8042 (interrupt, 0, 1) [ 46.139350] i8042: [13667] ** <- i8042 (interrupt, 0, 1) [ 46.147078] i8042: [13670] ** <- i8042 (interrupt, 0, 1) [ 46.209070] i8042: [13688] ** <- i8042 (interrupt, 0, 1) [ 46.245462] i8042: [13699] ** <- i8042 (interrupt, 0, 1) [ 46.415310] i8042: [13750] ** <- i8042 (interrupt, 0, 1) [ 46.508491] i8042: [13778] ** <- i8042 (interrupt, 0, 1) [ 46.684645] i8042: [13831] ** <- i8042 (interrupt, 0, 1) [ 46.817341] i8042: [13871] ** <- i8042 (interrupt, 0, 1) [ 47.520560] i8042: [14082] ** <- i8042 (interrupt, 0, 1) [ 47.623106] i8042: [14113] ** <- i8042 (interrupt, 0, 1) [ 47.774244] i8042: [14158] ** <- i8042 (interrupt, 0, 1) [ 47.865339] i8042: [14185] ** <- i8042 (interrupt, 0, 1) [ 47.983203] i8042: [14221] ** <- i8042 (interrupt, 0, 1) [ 48.049337] i8042: [14241] ** <- i8042 (interrupt, 0, 1) [ 65.782899] i8042: [19564] ** <- i8042 (interrupt, 0, 1) [ 65.784769] i8042: [19564] ** <- i8042 (interrupt, 0, 1) [ 65.895180] i8042: [19598] ** <- i8042 (interrupt, 0, 1) [ 65.898724] i8042: [19599] ** <- i8042 (interrupt, 0, 1) [ 66.426408] i8042: [19757] ** <- i8042 (interrupt, 0, 1) [ 66.518531] i8042: [19785] ** <- i8042 (interrupt, 0, 1) [ 67.829899] i8042: [20178] ** <- i8042 (interrupt, 0, 1) [ 67.942845] i8042: [20212] ** <- i8042 (interrupt, 0, 1) [ 68.780070] i8042: [20463] ** <- i8042 (interrupt, 0, 1) [ 68.861152] i8042: [20488] ** <- i8042 (interrupt, 0, 1) [ 68.928317] i8042: [20508] ** <- i8042 (interrupt, 0, 1) [ 68.980304] i8042: [20523] ** <- i8042 (interrupt, 0, 1) [ 69.200039] i8042: [20589] ** <- i8042 (interrupt, 0, 1) [ 69.317098] i8042: [20624] ** <- i8042 (interrupt, 0, 1) [ 69.939160] i8042: [20811] ** <- i8042 (interrupt, 0, 1) [ 69.941014] i8042: [20812] ** <- i8042 (interrupt, 0, 1) [ 70.038940] i8042: [20841] ** <- i8042 (interrupt, 0, 1) [ 70.042502] i8042: [20842] ** <- i8042 (interrupt, 0, 1) [ 70.514038] i8042: [20984] ** <- i8042 (interrupt, 0, 1) [ 70.615527] i8042: [21014] ** <- i8042 (interrupt, 0, 1) [ 70.823843] i8042: [21077] ** <- i8042 (interrupt, 0, 1) [ 70.891404] i8042: [21097] ** <- i8042 (interrupt, 0, 1) [ 70.982494] i8042: [21124] ** <- i8042 (interrupt, 0, 1) [ 71.025021] i8042: [21137] ** <- i8042 (interrupt, 0, 1) [ 71.279152] i8042: [21213] ** <- i8042 (interrupt, 0, 1) [ 71.395184] i8042: [21248] ** <- i8042 (interrupt, 0, 1) [ 72.304285] i8042: [21521] ** <- i8042 (interrupt, 0, 1) [ 72.395370] i8042: [21548] ** <- i8042 (interrupt, 0, 1) [ 72.906181] i8042: [21701] ** <- i8042 (interrupt, 0, 1) [ 73.012754] i8042: [21733] ** <- i8042 (interrupt, 0, 1) [ 73.142146] i8042: [21772] ** <- i8042 (interrupt, 0, 1) [ 73.276810] i8042: [21813] ** <- i8042 (interrupt, 0, 1) [ 73.799126] i8042: [21969] ** <- i8042 (interrupt, 0, 1) [ 73.879180] i8042: [21993] ** <- i8042 (interrupt, 0, 1) [ 73.952579] i8042: [22015] ** <- i8042 (interrupt, 0, 1) [ 74.016994] i8042: [22035] ** <- i8042 (interrupt, 0, 1) [ 75.104800] i8042: [22361] ** <- i8042 (interrupt, 0, 1) dmesg output after putting machine to sleep and resuming: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda7 rw raid=noautodetect i8042.debug=1 i8042.noaux=1 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda7 rw raid=noautodetect i8042.debug=1 i8042.noaux=1 [ 0.580463] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.580488] i8042: [0] d1 -> i8042 (command) [ 0.580547] i8042: [0] df -> i8042 (parameter) [ 0.580605] i8042: [0] ff -> i8042 (command) [ 0.580703] i8042: [0] 20 -> i8042 (command) [ 0.580764] i8042: [0] 67 <- i8042 (return) [ 0.580819] i8042: [0] 20 -> i8042 (command) [ 0.580880] i8042: [0] 67 <- i8042 (return) [ 0.580886] i8042: [0] 60 -> i8042 (command) [ 0.580945] i8042: [0] 76 -> i8042 (parameter) [ 0.580979] i8042: [0] 60 -> i8042 (command) [ 0.581195] i8042: [0] 67 -> i8042 (parameter) [ 0.581200] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.606203] i8042: [7] f2 -> i8042 (kbd-data) [ 0.611071] i8042: [9] fa <- i8042 (interrupt, 0, 1) [ 0.612916] i8042: [9] ab <- i8042 (interrupt, 0, 1) [ 0.614775] i8042: [10] 54 <- i8042 (interrupt, 0, 1) [ 0.614785] i8042: [10] f5 -> i8042 (kbd-data) [ 0.616519] i8042: [10] fa <- i8042 (interrupt, 0, 1) [ 0.616525] i8042: [10] ed -> i8042 (kbd-data) [ 0.618267] i8042: [11] fa <- i8042 (interrupt, 0, 1) [ 0.618274] i8042: [11] 00 -> i8042 (kbd-data) [ 0.620036] i8042: [12] fa <- i8042 (interrupt, 0, 1) [ 0.620059] i8042: [12] f3 -> i8042 (kbd-data) [ 0.621871] i8042: [12] fa <- i8042 (interrupt, 0, 1) [ 0.621919] i8042: [12] 00 -> i8042 (kbd-data) [ 0.623655] i8042: [13] fa <- i8042 (interrupt, 0, 1) [ 0.623697] i8042: [13] f4 -> i8042 (kbd-data) [ 0.625453] i8042: [13] fa <- i8042 (interrupt, 0, 1) [ 0.625560] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 20.451122] i8042: [5961] ** <- i8042 (interrupt, 0, 1) [ 20.513500] i8042: [5980] ** <- i8042 (interrupt, 0, 1) [ 20.621249] i8042: [6012] ** <- i8042 (interrupt, 0, 1) [ 20.646198] i8042: [6019] ** <- i8042 (interrupt, 0, 1) [ 20.901351] i8042: [6096] ** <- i8042 (interrupt, 0, 1) [ 21.016251] i8042: [6130] ** <- i8042 (interrupt, 0, 1) [ 21.038582] i8042: [6137] ** <- i8042 (interrupt, 0, 1) [ 21.121771] i8042: [6162] ** <- i8042 (interrupt, 0, 1) [ 21.156715] i8042: [6173] ** <- i8042 (interrupt, 0, 1) [ 21.262759] i8042: [6204] ** <- i8042 (interrupt, 0, 1) [ 21.553194] i8042: [6291] ** <- i8042 (interrupt, 0, 1) [ 21.683803] i8042: [6331] ** <- i8042 (interrupt, 0, 1) [ 22.986045] i8042: [6721] ** <- i8042 (interrupt, 0, 1) [ 23.054660] i8042: [6742] ** <- i8042 (interrupt, 0, 1) [ 23.069845] i8042: [6746] ** <- i8042 (interrupt, 0, 1) [ 23.182136] i8042: [6780] ** <- i8042 (interrupt, 0, 1) [ 23.330160] i8042: [6825] ** <- i8042 (interrupt, 0, 1) [ 23.457594] i8042: [6863] ** <- i8042 (interrupt, 0, 1) [ 25.796205] i8042: [7564] ** <- i8042 (interrupt, 0, 1) [ 25.917439] i8042: [7601] ** <- i8042 (interrupt, 0, 1) [ 26.088318] i8042: [7652] ** <- i8042 (interrupt, 0, 1) [ 26.209582] i8042: [7688] ** <- i8042 (interrupt, 0, 1) [ 26.286913] i8042: [7712] ** <- i8042 (interrupt, 0, 1) [ 26.389433] i8042: [7742] ** <- i8042 (interrupt, 0, 1) [ 26.438691] i8042: [7757] ** <- i8042 (interrupt, 0, 1) [ 26.568241] i8042: [7796] ** <- i8042 (interrupt, 0, 1) [ 26.824402] i8042: [7873] ** <- i8042 (interrupt, 0, 1) [ 26.936696] i8042: [7907] ** <- i8042 (interrupt, 0, 1) [ 26.950851] i8042: [7911] ** <- i8042 (interrupt, 0, 1) [ 27.061062] i8042: [7944] ** <- i8042 (interrupt, 0, 1) [ 27.208063] i8042: [7988] ** <- i8042 (interrupt, 0, 1) [ 27.297467] i8042: [8015] ** <- i8042 (interrupt, 0, 1) [ 27.330314] i8042: [8025] ** <- i8042 (interrupt, 0, 1) [ 27.410375] i8042: [8049] ** <- i8042 (interrupt, 0, 1) [ 27.544863] i8042: [8089] ** <- i8042 (interrupt, 0, 1) [ 27.675444] i8042: [8128] ** <- i8042 (interrupt, 0, 1) [ 28.356760] i8042: [8333] ** <- i8042 (interrupt, 0, 1) [ 28.479062] i8042: [8369] ** <- i8042 (interrupt, 0, 1) [ 28.508559] i8042: [8378] ** <- i8042 (interrupt, 0, 1) [ 28.613285] i8042: [8409] ** <- i8042 (interrupt, 0, 1) [ 28.729994] i8042: [8444] ** <- i8042 (interrupt, 0, 1) [ 28.832510] i8042: [8475] ** <- i8042 (interrupt, 0, 1) [ 40.698088] i8042: [12035] ** <- i8042 (interrupt, 0, 1) [ 40.699985] i8042: [12035] ** <- i8042 (interrupt, 0, 1) [ 40.922791] i8042: [12102] ** <- i8042 (interrupt, 0, 1) [ 40.924653] i8042: [12103] ** <- i8042 (interrupt, 0, 1) [ 40.952840] i8042: [12111] ** <- i8042 (interrupt, 0, 1) [ 40.954699] i8042: [12112] ** <- i8042 (interrupt, 0, 1) [ 40.977819] i8042: [12119] ** <- i8042 (interrupt, 0, 1) [ 40.979724] i8042: [12119] ** <- i8042 (interrupt, 0, 1) [ 41.002735] i8042: [12126] ** <- i8042 (interrupt, 0, 1) [ 41.004598] i8042: [12127] ** <- i8042 (interrupt, 0, 1) [ 41.027718] i8042: [12134] ** <- i8042 (interrupt, 0, 1) [ 41.029578] i8042: [12134] ** <- i8042 (interrupt, 0, 1) [ 41.052662] i8042: [12141] ** <- i8042 (interrupt, 0, 1) [ 41.054506] i8042: [12142] ** <- i8042 (interrupt, 0, 1) [ 41.057850] i8042: [12143] ** <- i8042 (interrupt, 0, 1) [ 41.179495] i8042: [12179] ** <- i8042 (interrupt, 0, 1) [ 41.183089] i8042: [12180] ** <- i8042 (interrupt, 0, 1) [ 41.200876] i8042: [12186] ** <- i8042 (interrupt, 0, 1) [ 43.629878] i8042: [12914] ** <- i8042 (interrupt, 0, 1) [ 43.767772] i8042: [12956] ** <- i8042 (interrupt, 0, 1) [ 43.775446] i8042: [12958] ** <- i8042 (interrupt, 0, 1) [ 43.881105] i8042: [12990] ** <- i8042 (interrupt, 0, 1) [ 43.889816] i8042: [12992] ** <- i8042 (interrupt, 0, 1) [ 43.973641] i8042: [13018] ** <- i8042 (interrupt, 0, 1) [ 44.097788] i8042: [13055] ** <- i8042 (interrupt, 0, 1) [ 44.198245] i8042: [13085] ** <- i8042 (interrupt, 0, 1) [ 44.309915] i8042: [13118] ** <- i8042 (interrupt, 0, 1) [ 44.407663] i8042: [13148] ** <- i8042 (interrupt, 0, 1) [ 44.418704] i8042: [13151] ** <- i8042 (interrupt, 0, 1) [ 44.527887] i8042: [13184] ** <- i8042 (interrupt, 0, 1) [ 44.975360] i8042: [13318] ** <- i8042 (interrupt, 0, 1) [ 44.977214] i8042: [13319] ** <- i8042 (interrupt, 0, 1) [ 45.132347] i8042: [13365] ** <- i8042 (interrupt, 0, 1) [ 45.283080] i8042: [13410] ** <- i8042 (interrupt, 0, 1) [ 45.286627] i8042: [13411] ** <- i8042 (interrupt, 0, 1) [ 45.294125] i8042: [13414] ** <- i8042 (interrupt, 0, 1) [ 45.514934] i8042: [13480] ** <- i8042 (interrupt, 0, 1) [ 45.629938] i8042: [13514] ** <- i8042 (interrupt, 0, 1) [ 45.710391] i8042: [13539] ** <- i8042 (interrupt, 0, 1) [ 45.809808] i8042: [13568] ** <- i8042 (interrupt, 0, 1) [ 45.993201] i8042: [13623] ** <- i8042 (interrupt, 0, 1) [ 46.102365] i8042: [13656] ** <- i8042 (interrupt, 0, 1) [ 46.139350] i8042: [13667] ** <- i8042 (interrupt, 0, 1) [ 46.147078] i8042: [13670] ** <- i8042 (interrupt, 0, 1) [ 46.209070] i8042: [13688] ** <- i8042 (interrupt, 0, 1) [ 46.245462] i8042: [13699] ** <- i8042 (interrupt, 0, 1) [ 46.415310] i8042: [13750] ** <- i8042 (interrupt, 0, 1) [ 46.508491] i8042: [13778] ** <- i8042 (interrupt, 0, 1) [ 46.684645] i8042: [13831] ** <- i8042 (interrupt, 0, 1) [ 46.817341] i8042: [13871] ** <- i8042 (interrupt, 0, 1) [ 47.520560] i8042: [14082] ** <- i8042 (interrupt, 0, 1) [ 47.623106] i8042: [14113] ** <- i8042 (interrupt, 0, 1) [ 47.774244] i8042: [14158] ** <- i8042 (interrupt, 0, 1) [ 47.865339] i8042: [14185] ** <- i8042 (interrupt, 0, 1) [ 47.983203] i8042: [14221] ** <- i8042 (interrupt, 0, 1) [ 48.049337] i8042: [14241] ** <- i8042 (interrupt, 0, 1) [ 65.782899] i8042: [19564] ** <- i8042 (interrupt, 0, 1) [ 65.784769] i8042: [19564] ** <- i8042 (interrupt, 0, 1) [ 65.895180] i8042: [19598] ** <- i8042 (interrupt, 0, 1) [ 65.898724] i8042: [19599] ** <- i8042 (interrupt, 0, 1) [ 66.426408] i8042: [19757] ** <- i8042 (interrupt, 0, 1) [ 66.518531] i8042: [19785] ** <- i8042 (interrupt, 0, 1) [ 67.829899] i8042: [20178] ** <- i8042 (interrupt, 0, 1) [ 67.942845] i8042: [20212] ** <- i8042 (interrupt, 0, 1) [ 68.780070] i8042: [20463] ** <- i8042 (interrupt, 0, 1) [ 68.861152] i8042: [20488] ** <- i8042 (interrupt, 0, 1) [ 68.928317] i8042: [20508] ** <- i8042 (interrupt, 0, 1) [ 68.980304] i8042: [20523] ** <- i8042 (interrupt, 0, 1) [ 69.200039] i8042: [20589] ** <- i8042 (interrupt, 0, 1) [ 69.317098] i8042: [20624] ** <- i8042 (interrupt, 0, 1) [ 69.939160] i8042: [20811] ** <- i8042 (interrupt, 0, 1) [ 69.941014] i8042: [20812] ** <- i8042 (interrupt, 0, 1) [ 70.038940] i8042: [20841] ** <- i8042 (interrupt, 0, 1) [ 70.042502] i8042: [20842] ** <- i8042 (interrupt, 0, 1) [ 70.514038] i8042: [20984] ** <- i8042 (interrupt, 0, 1) [ 70.615527] i8042: [21014] ** <- i8042 (interrupt, 0, 1) [ 70.823843] i8042: [21077] ** <- i8042 (interrupt, 0, 1) [ 70.891404] i8042: [21097] ** <- i8042 (interrupt, 0, 1) [ 70.982494] i8042: [21124] ** <- i8042 (interrupt, 0, 1) [ 71.025021] i8042: [21137] ** <- i8042 (interrupt, 0, 1) [ 71.279152] i8042: [21213] ** <- i8042 (interrupt, 0, 1) [ 71.395184] i8042: [21248] ** <- i8042 (interrupt, 0, 1) [ 72.304285] i8042: [21521] ** <- i8042 (interrupt, 0, 1) [ 72.395370] i8042: [21548] ** <- i8042 (interrupt, 0, 1) [ 72.906181] i8042: [21701] ** <- i8042 (interrupt, 0, 1) [ 73.012754] i8042: [21733] ** <- i8042 (interrupt, 0, 1) [ 73.142146] i8042: [21772] ** <- i8042 (interrupt, 0, 1) [ 73.276810] i8042: [21813] ** <- i8042 (interrupt, 0, 1) [ 73.799126] i8042: [21969] ** <- i8042 (interrupt, 0, 1) [ 73.879180] i8042: [21993] ** <- i8042 (interrupt, 0, 1) [ 73.952579] i8042: [22015] ** <- i8042 (interrupt, 0, 1) [ 74.016994] i8042: [22035] ** <- i8042 (interrupt, 0, 1) [ 75.104800] i8042: [22361] ** <- i8042 (interrupt, 0, 1) [ 75.166735] i8042: [22380] ** <- i8042 (interrupt, 0, 1) [ 78.241185] i8042: [23302] ** <- i8042 (interrupt, 0, 1) [ 78.371170] i8042: [23341] ** <- i8042 (interrupt, 0, 1) [ 78.382199] i8042: [23345] ** <- i8042 (interrupt, 0, 1) [ 78.499693] i8042: [23380] ** <- i8042 (interrupt, 0, 1) [ 78.507367] i8042: [23382] ** <- i8042 (interrupt, 0, 1) [ 78.618204] i8042: [23415] ** <- i8042 (interrupt, 0, 1) [ 78.738155] i8042: [23451] ** <- i8042 (interrupt, 0, 1) [ 78.835491] i8042: [23481] ** <- i8042 (interrupt, 0, 1) [ 78.928419] i8042: [23508] ** <- i8042 (interrupt, 0, 1) [ 79.058885] i8042: [23548] ** <- i8042 (interrupt, 0, 1) [ 79.070861] i8042: [23551] ** <- i8042 (interrupt, 0, 1) [ 79.187887] i8042: [23586] ** <- i8042 (interrupt, 0, 1) [ 94.293200] i8042: [28118] f6 -> i8042 (kbd-data) [ 94.294975] i8042: [28119] ** <- i8042 (interrupt, 0, 1) [ 94.294992] i8042: [28119] 60 -> i8042 (command) [ 94.295050] i8042: [28119] 74 -> i8042 (parameter) [ 94.295108] i8042: [28119] aa -> i8042 (command) [ 94.297361] i8042: [28119] 55 <- i8042 (return) [ 94.297364] i8042: [28119] 60 -> i8042 (command) [ 94.297422] i8042: [28120] 67 -> i8042 (parameter) [ 95.683201] i8042: [28535] 39 <- i8042 (flush, kbd) [ 95.683211] i8042: [28535] aa -> i8042 (command) [ 95.688789] i8042: [28536] 55 <- i8042 (return) [ 95.688798] i8042: [28536] Interrupt 1, without any data [ 95.688843] i8042: [28536] 60 -> i8042 (command) [ 95.688903] i8042: [28536] 74 -> i8042 (parameter) [ 95.688963] i8042: [28536] 60 -> i8042 (command) [ 95.689128] i8042: [28536] 65 -> i8042 (parameter) [ 95.689155] i8042: [28536] f2 -> i8042 (kbd-data) [ 95.691082] i8042: [28537] ** <- i8042 (interrupt, 0, 1) [ 95.692957] i8042: [28538] ** <- i8042 (interrupt, 0, 1) [ 95.694809] i8042: [28538] ** <- i8042 (interrupt, 0, 1) [ 95.699233] i8042: [28540] f5 -> i8042 (kbd-data) [ 95.701907] i8042: [28540] ** <- i8042 (interrupt, 0, 1) [ 95.701937] i8042: [28540] ed -> i8042 (kbd-data) [ 95.703679] i8042: [28541] ** <- i8042 (interrupt, 0, 1) [ 95.703696] i8042: [28541] 00 -> i8042 (kbd-data) [ 95.705454] i8042: [28541] ** <- i8042 (interrupt, 0, 1) [ 95.705471] i8042: [28541] f3 -> i8042 (kbd-data) [ 95.707196] i8042: [28542] ** <- i8042 (interrupt, 0, 1) [ 95.707212] i8042: [28542] 00 -> i8042 (kbd-data) [ 95.708944] i8042: [28542] ** <- i8042 (interrupt, 0, 1) [ 95.709046] i8042: [28542] f4 -> i8042 (kbd-data) [ 95.713625] i8042: [28544] ** <- i8042 (interrupt, 0, 1) [ 95.713770] i8042: [28544] ed -> i8042 (kbd-data) [ 95.715720] i8042: [28544] ** <- i8042 (interrupt, 0, 1) [ 95.715762] i8042: [28544] 00 -> i8042 (kbd-data) [ 95.717578] i8042: [28545] ** <- i8042 (interrupt, 0, 1) [ 95.717733] i8042: [28545] f3 -> i8042 (kbd-data) [ 95.719502] i8042: [28546] ** <- i8042 (interrupt, 0, 1) [ 95.719598] i8042: [28546] 00 -> i8042 (kbd-data) [ 95.721418] i8042: [28546] ** <- i8042 (interrupt, 0, 1) [ 96.272741] i8042: [28712] ** <- i8042 (interrupt, 0, 1) [ 96.285881] i8042: [28716] ** <- i8042 (interrupt, 0, 1) [ 96.756046] i8042: [28857] ** <- i8042 (interrupt, 0, 1) [ 96.845517] i8042: [28883] ** <- i8042 (interrupt, 0, 1) [ 96.897083] i8042: [28899] ** <- i8042 (interrupt, 0, 1) [ 96.978750] i8042: [28923] ** <- i8042 (interrupt, 0, 1) [ 97.286205] i8042: [29016] ** <- i8042 (interrupt, 0, 1) [ 97.418898] i8042: [29055] ** <- i8042 (interrupt, 0, 1) [ 97.716827] i8042: [29145] ** <- i8042 (interrupt, 0, 1) [ 97.771105] i8042: [29161] ** <- i8042 (interrupt, 0, 1) [ 97.826197] i8042: [29178] ** <- i8042 (interrupt, 0, 1) [ 97.874720] i8042: [29192] ** <- i8042 (interrupt, 0, 1) [ 99.301862] i8042: [29620] ** <- i8042 (interrupt, 0, 1) [ 99.417867] i8042: [29655] ** <- i8042 (interrupt, 0, 1) [ 101.947750] i8042: [30414] ** <- i8042 (interrupt, 0, 1) [ 101.949609] i8042: [30415] ** <- i8042 (interrupt, 0, 1) [ 102.051721] i8042: [30445] ** <- i8042 (interrupt, 0, 1) [ 102.055270] i8042: [30446] ** <- i8042 (interrupt, 0, 1) [ 102.318921] i8042: [30525] ** <- i8042 (interrupt, 0, 1) [ 102.320773] i8042: [30526] ** <- i8042 (interrupt, 0, 1) [ 102.461379] i8042: [30568] ** <- i8042 (interrupt, 0, 1) [ 102.464981] i8042: [30569] ** <- i8042 (interrupt, 0, 1) [ 103.642476] i8042: [30923] ** <- i8042 (interrupt, 0, 1) [ 103.644332] i8042: [30923] ** <- i8042 (interrupt, 0, 1) [ 103.782855] i8042: [30965] ** <- i8042 (interrupt, 0, 1) [ 103.786408] i8042: [30966] ** <- i8042 (interrupt, 0, 1) [ 104.798780] i8042: [31269] ** <- i8042 (interrupt, 0, 1) [ 104.908618] i8042: [31302] ** <- i8042 (interrupt, 0, 1) [ 117.919699] i8042: [35206] ** <- i8042 (interrupt, 0, 1) [ 117.921552] i8042: [35206] ** <- i8042 (interrupt, 0, 1) [ 118.059019] i8042: [35248] ** <- i8042 (interrupt, 0, 1) [ 118.062561] i8042: [35249] ** <- i8042 (interrupt, 0, 1) [ 120.058560] i8042: [35847] ** <- i8042 (interrupt, 0, 1) [ 120.173514] i8042: [35882] ** <- i8042 (interrupt, 0, 1) [ 120.511854] i8042: [35983] ** <- i8042 (interrupt, 0, 1) [ 120.587763] i8042: [36006] ** <- i8042 (interrupt, 0, 1) [ 120.737080] i8042: [36051] ** <- i8042 (interrupt, 0, 1) [ 120.746434] i8042: [36054] ** <- i8042 (interrupt, 0, 1) [ 120.999481] i8042: [36130] ** <- i8042 (interrupt, 0, 1) [ 121.096736] i8042: [36159] ** <- i8042 (interrupt, 0, 1) [ 121.302008] i8042: [36221] ** <- i8042 (interrupt, 0, 1) [ 121.432601] i8042: [36260] ** <- i8042 (interrupt, 0, 1) [ 121.767831] i8042: [36360] ** <- i8042 (interrupt, 0, 1) [ 121.872835] i8042: [36392] ** <- i8042 (interrupt, 0, 1) [ 121.888019] i8042: [36396] ** <- i8042 (interrupt, 0, 1) [ 122.097413] i8042: [36459] ** <- i8042 (interrupt, 0, 1) [ 122.105333] i8042: [36462] ** <- i8042 (interrupt, 0, 1) [ 122.466502] i8042: [36570] ** <- i8042 (interrupt, 0, 1) [ 122.592963] i8042: [36608] ** <- i8042 (interrupt, 0, 1) [ 123.208891] i8042: [36793] ** <- i8042 (interrupt, 0, 1) [ 123.295900] i8042: [36819] ** <- i8042 (interrupt, 0, 1) [ 123.753829] i8042: [36956] ** <- i8042 (interrupt, 0, 1) [ 123.883410] i8042: [36995] ** <- i8042 (interrupt, 0, 1) [ 124.028268] i8042: [37038] ** <- i8042 (interrupt, 0, 1) [ 124.131964] i8042: [37070] ** <- i8042 (interrupt, 0, 1) [ 124.339297] i8042: [37132] ** <- i8042 (interrupt, 0, 1) [ 124.497351] i8042: [37179] ** <- i8042 (interrupt, 0, 1) [ 124.508394] i8042: [37182] ** <- i8042 (interrupt, 0, 1) [ 124.629411] i8042: [37219] ** <- i8042 (interrupt, 0, 1) [ 124.703877] i8042: [37241] ** <- i8042 (interrupt, 0, 1) [ 124.761086] i8042: [37258] ** <- i8042 (interrupt, 0, 1) [ 125.430180] i8042: [37459] ** <- i8042 (interrupt, 0, 1) -- Numan Demirdöğen ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: PROBLEM: Keyboard not responding after resuming from suspend/hibernate 2018-09-03 8:53 ` Numan Demirdöğen @ 2018-09-18 18:54 ` Pavel Machek 0 siblings, 0 replies; 13+ messages in thread From: Pavel Machek @ 2018-09-18 18:54 UTC (permalink / raw) To: Numan Demirdöğen; +Cc: peterz, mingo, linux-kernel, rjw [-- Attachment #1: Type: text/plain, Size: 1554 bytes --] On Mon 2018-09-03 11:53:51, Numan Demirdöğen wrote: > Fri, 31 Aug 2018 21:51:21 +0300 tarihinde > Numan Demirdöğen <if.gnu.linux@gmail.com> yazdı: > > >If I put laptop to suspend or hibernate by closing lid, power > >manager or any other method and then I resume/wake up laptop, keyboard > >is not responding. My laptop is a Sony Vaio VPCEH2F1E. > > > >Steps to produce bug: > >1. Boot > >2. Put laptop to sleep > >3. Resume > > > >What I expect to happen: Keyboard responds to key press. > >What happens: Keyboard does not respond but mouse and trackball are > >working. > > > >git bisect point 9d659ae14b545c4296e812c70493bfdc999b5c1c as the first > >bad commit. > > > >Bad commit link: > >https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=9d659ae14b545c4296e812c70493bfdc999b5c1c > > > > I tried some kernel parameters related to i8042 driver: > > i8042.debug=1 i8042.reset=1 keyboard not working > i8042.debug=1 i8042.kbdreset=1 keyboard not working > i8042.debug=1 i8042.nomux=1 keyboard not working > i8042.debug=1 i8042.noaux=1 keyboard working, but touchpad not > working > > On some rare occasions, keyboard responds to key press but it remains > pressed forever even if I stop pressing it. > > dmesg output after rebooting with i8042.debug=1 i8042.noaux=1 > parameters: You may want to cc linux-input people. See the maintainers. -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 181 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Fw: PROBLEM: Keyboard not responding after resuming from suspend/hibernate 2018-08-31 18:53 PROBLEM: Keyboard not responding after resuming from suspend/hibernate Numan Demirdöğen 2018-08-31 19:16 ` Peter Zijlstra 2018-09-03 8:53 ` Numan Demirdöğen @ 2018-10-19 7:20 ` Numan Demirdöğen 2018-10-25 7:49 ` [regression, bisected] " Pavel Machek 2 siblings, 1 reply; 13+ messages in thread From: Numan Demirdöğen @ 2018-10-19 7:20 UTC (permalink / raw) To: dmitry.torokhov; +Cc: peterz, mingo, linux-kernel, linux-input [-- Attachment #1: Type: text/plain, Size: 5844 bytes --] On Fri, 31 Aug 2018 21:53:11 +0300 Numan Demirdöğen <if.gnu.linux@gmail.com> wrote: >If I put laptop to suspend or hibernate by closing lid, power >manager or any other method and then I resume/wake up laptop, keyboard >is not responding. My laptop is a Sony Vaio VPCEH2F1E. > >Steps to produce bug: >1. Boot >2. Put laptop to sleep >3. Resume > >What I expect to happen: Keyboard responds to key press. >What happens: Keyboard does not respond but mouse and trackball are >working. > >git bisect point 9d659ae14b545c4296e812c70493bfdc999b5c1c as the first >bad commit. > >Bad commit link: >https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=9d659ae14b545c4296e812c70493bfdc999b5c1c > > Link to actual bug report: >https://bugzilla.kernel.org/show_bug.cgi?id=195471 > >awk -f ver_linux >Linux korsan 4.18.5-arch1-1-ARCH #1 SMP PREEMPT Fri Aug 24 12:48:58 >UTC 2018 x86_64 GNU/Linux GNU C 8.2.0 >GNU Make 4.2.1 >Binutils 2.31.1 >Util-linux 2.32.1 >Mount 2.32.1 >Module-init-tools 25 >E2fsprogs 1.44.4 >Jfsutils 1.1.15 >Reiserfsprogs 3.6.27 >Xfsprogs 4.17.0 >Pcmciautils 018 >Linux C Library 2.28 >Dynamic linker (ldd) 2.28 >Linux C++ Library 6.0.25 >Procps 3.3.15 >Kbd 2.0.4 >Console-tools 2.0.4 >Sh-utils 8.29 >Udev 239 >Wireless-tools 30 >Modules Loaded ac agpgart ahci arc4 ath ath3k ath9k >ath9k_common ath9k_hw atkbd battery bluetooth bpfilter ccm cdrom >cfg80211 coretemp crc16 crc32c_generic crc32c_intel crc32_pclmul >crct10dif_pclmul cryptd drm drm_kms_helper ecdh_generic ehci_hcd >ehci_pci evdev ext4 fb_sys_fops fscrypto fuse ghash_clmulni_intel >gpio_ich hid hid_generic i2c_algo_bit i2c_i801 i8042 i915 input_leds >intel_cstate intel_gtt intel_powerclamp intel_rapl intel_rapl_perf >intel_uncore iptable_filter iptable_mangle iptable_nat ip_tables >irqbypass iTCO_vendor_support iTCO_wdt jbd2 kvm kvm_intel led_class >libahci libata libcrc32c libps2 lpc_ich mac80211 mac_hid mbcache mei >mei_me mousedev msr nf_conntrack nf_conntrack_ipv4 nf_defrag_ipv4 >nf_nat nf_nat_ipv4 pcc_cpufreq psmouse rfkill rtc_cmos scsi_mod sd_mod >serio serio_raw snd snd_hda_codec snd_hda_codec_conexant >snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_core snd_hda_intel >snd_hwdep snd_pcm snd_timer sony_laptop soundcore sr_mod syscopyarea >sysfillrect sysimgblt usb_common usbcore usbhid x86_pkg_temp_thermal >x_tables > >dmesg | grep i8042 >[ 0.574078] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] >at 0x60,0x64 irq 1,12 [ 0.575936] serio: i8042 KBD port at >0x60,0x64 irq 1 [ 0.576143] serio: i8042 AUX port at 0x60,0x64 irq >12 [ 0.618880] input: AT Translated Set 2 keyboard >as /devices/platform/i8042/serio0/input/input3 [ 11.248435] input: >AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input5 > >cat /proc/interrupts > CPU0 CPU1 CPU2 CPU3 > 0: 8 0 0 0 IO-APIC > 2-edge timer 1: 0 0 0 10286 > IO-APIC 1-edge i8042 8: 0 0 > 0 1 IO-APIC 8-edge rtc0 9: 0 > 9479 0 0 IO-APIC 9-fasteoi acpi 12: > 0 0 370114 0 IO-APIC 12-edge i8042 > 16: 197457 0 0 0 IO-APIC > 16-fasteoi ehci_hcd:usb1, ath9k 19: 0 0 > 0 0 IO-APIC 19-fasteoi i801_smbus 23: > 0 0 71055 0 IO-APIC 23-fasteoi > ehci_hcd:usb2 24: 0 74549 0 0 > PCI-MSI 512000-edge ahci[0000:00:1f.2] 25: 0 > 14 0 0 PCI-MSI 360448-edge mei_me > 26: 0 0 138870 0 PCI-MSI > 32768-edge i915 27: 0 0 0 > 330 PCI-MSI 442368-edge snd_hda_intel:card0 >NMI: 24 22 25 21 Non-maskable >interrupts LOC: 534734 446934 603337 440320 Local >timer interrupts SPU: 0 0 0 0 >Spurious interrupts PMI: 24 22 25 21 >Performance monitoring interrupts IWI: 26 12 >43115 22 IRQ work interrupts RTR: 0 >0 0 0 APIC ICR read retries RES: 95282 >76970 60242 46409 Rescheduling interrupts CAL: >66746 75300 70554 69119 Function call interrupts >TLB: 50929 54528 51413 48017 TLB shootdowns >TRM: 0 0 0 0 Thermal event >interrupts THR: 0 0 0 0 >Threshold APIC interrupts DFR: 0 0 >0 0 Deferred Error APIC interrupts MCE: 0 >0 0 0 Machine check exceptions MCP: >18 19 19 19 Machine check polls >HYP: 0 0 0 0 Hypervisor callback >interrupts HRE: 0 0 0 0 Hyper-V >reenlightenment interrupts HVS: 0 0 >0 0 Hyper-V stimer0 interrupts ERR: 0 >MIS: 0 PIN: 0 0 0 0 >Posted-interrupt notification event NPI: 0 >0 0 0 Nested posted-interrupt event PIW: >0 0 0 0 Posted-interrupt wakeup event > >P.S: My native language is not English. > Hi, I am forwarding this e-mail which describes a problem related to suspend/hibernate at the advise of Pavel Machek. -- Numan Demirdöğen [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* [regression, bisected] Keyboard not responding after resuming from suspend/hibernate 2018-10-19 7:20 ` Fw: " Numan Demirdöğen @ 2018-10-25 7:49 ` Pavel Machek 2018-10-28 19:06 ` Numan Demirdöğen 0 siblings, 1 reply; 13+ messages in thread From: Pavel Machek @ 2018-10-25 7:49 UTC (permalink / raw) To: Numan Demirdöğen, jason.low2, Waiman.Long, paulmck, tglx Cc: dmitry.torokhov, peterz, mingo, linux-kernel, linux-input [-- Attachment #1: Type: text/plain, Size: 6682 bytes --] Hi! Here's problem bisected down to: commit 9d659ae14b545c4296e812c70493bfdc999b5c1c Author: Peter Zijlstra <peterz@infradead.org> Date: Tue Aug 23 14:40:16 2016 +0200 locking/mutex: Add lock handoff to avoid starvation Implement lock handoff to avoid lock starvation. Numan, I assume revert of that patch on the 4.18 kernel still makes it work? Peter, any ideas? Pavel On Fri 2018-10-19 10:20:31, Numan Demirdöğen wrote: > On Fri, 31 Aug 2018 21:53:11 +0300 > Numan Demirdöğen <if.gnu.linux@gmail.com> wrote: > > >If I put laptop to suspend or hibernate by closing lid, power > >manager or any other method and then I resume/wake up laptop, keyboard > >is not responding. My laptop is a Sony Vaio VPCEH2F1E. > > > >Steps to produce bug: > >1. Boot > >2. Put laptop to sleep > >3. Resume > > > >What I expect to happen: Keyboard responds to key press. > >What happens: Keyboard does not respond but mouse and trackball are > >working. > > > >git bisect point 9d659ae14b545c4296e812c70493bfdc999b5c1c as the first > >bad commit. > > > >Bad commit link: > >https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=9d659ae14b545c4296e812c70493bfdc999b5c1c > > > > Link to actual bug report: > >https://bugzilla.kernel.org/show_bug.cgi?id=195471 > > > >awk -f ver_linux > >Linux korsan 4.18.5-arch1-1-ARCH #1 SMP PREEMPT Fri Aug 24 12:48:58 > >UTC 2018 x86_64 GNU/Linux GNU C 8.2.0 > >GNU Make 4.2.1 > >Binutils 2.31.1 > >Util-linux 2.32.1 > >Mount 2.32.1 > >Module-init-tools 25 > >E2fsprogs 1.44.4 > >Jfsutils 1.1.15 > >Reiserfsprogs 3.6.27 > >Xfsprogs 4.17.0 > >Pcmciautils 018 > >Linux C Library 2.28 > >Dynamic linker (ldd) 2.28 > >Linux C++ Library 6.0.25 > >Procps 3.3.15 > >Kbd 2.0.4 > >Console-tools 2.0.4 > >Sh-utils 8.29 > >Udev 239 > >Wireless-tools 30 > >Modules Loaded ac agpgart ahci arc4 ath ath3k ath9k > >ath9k_common ath9k_hw atkbd battery bluetooth bpfilter ccm cdrom > >cfg80211 coretemp crc16 crc32c_generic crc32c_intel crc32_pclmul > >crct10dif_pclmul cryptd drm drm_kms_helper ecdh_generic ehci_hcd > >ehci_pci evdev ext4 fb_sys_fops fscrypto fuse ghash_clmulni_intel > >gpio_ich hid hid_generic i2c_algo_bit i2c_i801 i8042 i915 input_leds > >intel_cstate intel_gtt intel_powerclamp intel_rapl intel_rapl_perf > >intel_uncore iptable_filter iptable_mangle iptable_nat ip_tables > >irqbypass iTCO_vendor_support iTCO_wdt jbd2 kvm kvm_intel led_class > >libahci libata libcrc32c libps2 lpc_ich mac80211 mac_hid mbcache mei > >mei_me mousedev msr nf_conntrack nf_conntrack_ipv4 nf_defrag_ipv4 > >nf_nat nf_nat_ipv4 pcc_cpufreq psmouse rfkill rtc_cmos scsi_mod sd_mod > >serio serio_raw snd snd_hda_codec snd_hda_codec_conexant > >snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_core snd_hda_intel > >snd_hwdep snd_pcm snd_timer sony_laptop soundcore sr_mod syscopyarea > >sysfillrect sysimgblt usb_common usbcore usbhid x86_pkg_temp_thermal > >x_tables > > > >dmesg | grep i8042 > >[ 0.574078] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] > >at 0x60,0x64 irq 1,12 [ 0.575936] serio: i8042 KBD port at > >0x60,0x64 irq 1 [ 0.576143] serio: i8042 AUX port at 0x60,0x64 irq > >12 [ 0.618880] input: AT Translated Set 2 keyboard > >as /devices/platform/i8042/serio0/input/input3 [ 11.248435] input: > >AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input5 > > > >cat /proc/interrupts > > CPU0 CPU1 CPU2 CPU3 > > 0: 8 0 0 0 IO-APIC > > 2-edge timer 1: 0 0 0 10286 > > IO-APIC 1-edge i8042 8: 0 0 > > 0 1 IO-APIC 8-edge rtc0 9: 0 > > 9479 0 0 IO-APIC 9-fasteoi acpi 12: > > 0 0 370114 0 IO-APIC 12-edge i8042 > > 16: 197457 0 0 0 IO-APIC > > 16-fasteoi ehci_hcd:usb1, ath9k 19: 0 0 > > 0 0 IO-APIC 19-fasteoi i801_smbus 23: > > 0 0 71055 0 IO-APIC 23-fasteoi > > ehci_hcd:usb2 24: 0 74549 0 0 > > PCI-MSI 512000-edge ahci[0000:00:1f.2] 25: 0 > > 14 0 0 PCI-MSI 360448-edge mei_me > > 26: 0 0 138870 0 PCI-MSI > > 32768-edge i915 27: 0 0 0 > > 330 PCI-MSI 442368-edge snd_hda_intel:card0 > >NMI: 24 22 25 21 Non-maskable > >interrupts LOC: 534734 446934 603337 440320 Local > >timer interrupts SPU: 0 0 0 0 > >Spurious interrupts PMI: 24 22 25 21 > >Performance monitoring interrupts IWI: 26 12 > >43115 22 IRQ work interrupts RTR: 0 > >0 0 0 APIC ICR read retries RES: 95282 > >76970 60242 46409 Rescheduling interrupts CAL: > >66746 75300 70554 69119 Function call interrupts > >TLB: 50929 54528 51413 48017 TLB shootdowns > >TRM: 0 0 0 0 Thermal event > >interrupts THR: 0 0 0 0 > >Threshold APIC interrupts DFR: 0 0 > >0 0 Deferred Error APIC interrupts MCE: 0 > >0 0 0 Machine check exceptions MCP: > >18 19 19 19 Machine check polls > >HYP: 0 0 0 0 Hypervisor callback > >interrupts HRE: 0 0 0 0 Hyper-V > >reenlightenment interrupts HVS: 0 0 > >0 0 Hyper-V stimer0 interrupts ERR: 0 > >MIS: 0 PIN: 0 0 0 0 > >Posted-interrupt notification event NPI: 0 > >0 0 0 Nested posted-interrupt event PIW: > >0 0 0 0 Posted-interrupt wakeup event > > > >P.S: My native language is not English. > > > > Hi, > > I am forwarding this e-mail which describes a problem related to > suspend/hibernate at the advise of Pavel Machek. > -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 181 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [regression, bisected] Keyboard not responding after resuming from suspend/hibernate 2018-10-25 7:49 ` [regression, bisected] " Pavel Machek @ 2018-10-28 19:06 ` Numan Demirdöğen 2018-11-30 12:44 ` Numan Demirdöğen 0 siblings, 1 reply; 13+ messages in thread From: Numan Demirdöğen @ 2018-10-28 19:06 UTC (permalink / raw) To: Pavel Machek Cc: jason.low2, Waiman.Long, paulmck, tglx, dmitry.torokhov, peterz, mingo, linux-kernel, linux-input [-- Attachment #1: Type: text/plain, Size: 9804 bytes --] Thu, 25 Oct 2018 09:49:03 +0200 tarihinde Pavel Machek <pavel@ucw.cz> yazdı: > Hi! > > Here's problem bisected down to: > > commit 9d659ae14b545c4296e812c70493bfdc999b5c1c > Author: Peter Zijlstra <peterz@infradead.org> > Date: Tue Aug 23 14:40:16 2016 +0200 > > locking/mutex: Add lock handoff to avoid starvation > > Implement lock handoff to avoid lock starvation. > > Numan, I assume revert of that patch on the 4.18 kernel still makes it > work? > Unfortunately, I could not revert 9d659ae14b545c4296e812c70493bfdc999b5c1c on kernels from 4.18.16 to 4.10-rc1 because there were too much conflicts, which I could not solve as an "average Joe". I tried a3ea3d9b865c2a8f7fe455c7fa26db4b6fd066e3 which is parent of 9d659ae14b545c4296e812c70493bfdc999b5c1c and succeeded to compile kernel. git checkout a3ea3d9b865c2a8f7fe455c7fa26db4b6fd066e3 Then, I compiled kernel and rebooted with it. I tried a couples of times suspending and resuming, all of the time keyboard worked as expected. uname -a Linux ubuntu 4.9.0-rc2reverted+ #1 SMP Sun Oct 28 20:29:39 +03 2018 x86_64 x86_64 x86_64 GNU/Linux awk -f ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux ubuntu 4.9.0-rc2reverted+ #1 SMP Sun Oct 28 20:29:39 +03 2018 x86_64 x86_64 x86_64 GNU/Linux GNU Make 4.1 Binutils 2.30 Util-linux 2.31.1 Mount 2.31.1 Module-init-tools 24 E2fsprogs 1.44.1 Pcmciautils 018 Linux C Library 2.27 Dynamic linker (ldd) 2.27 Linux C++ Library 6.0.25 Procps 3.3.12 Kbd 2.0.4 Console-tools 2.0.4 Sh-utils 8.28 Udev 237 Wireless-tools 30 Modules Loaded ahci arc4 ath ath9k ath9k_common ath9k_hw autofs4 binfmt_misc ccm cfg80211 coretemp crc32_pclmul crct10dif_pclmul cryptd drm drm_kms_helper fb_sys_fops fjes ghash_clmulni_intel hid hid_generic i2c_algo_bit i915 input_leds intel_cstate intel_powerclamp intel_rapl intel_rapl_perf ip6table_filter ip6_tables ip6t_REJECT ip6t_rt iptable_filter ip_tables ipt_REJECT irqbypass kvm kvm_intel libahci lpc_ich mac80211 mac_hid mei mei_me nf_conntrack nf_conntrack_broadcast nf_conntrack_ftp nf_conntrack_ipv4 nf_conntrack_ipv6 nf_conntrack_netbios_ns nf_defrag_ipv4 nf_defrag_ipv6 nf_log_common nf_log_ipv4 nf_log_ipv6 nf_nat nf_nat_ftp nf_reject_ipv4 nf_reject_ipv6 psmouse sch_fq_codel serio_raw shpchp snd snd_hda_codec snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_core snd_hda_intel snd_hwdep snd_pcm snd_rawmidi snd_seq snd_seq_device snd_seq_midi snd_seq_midi_event snd_timer sony_laptop soundcore syscopyarea sysfillrect sysimgblt usbhid video x86_pkg_temp_thermal x_tables xt_addrtype xt_conntrack xt_hl xt_limit xt_LOG xt_tcpudp dmesg | grep i8042 [ 2.986695] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.989921] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.989925] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.014179] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 20.297566] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 > Peter, any ideas? > > Pavel > > On Fri 2018-10-19 10:20:31, Numan Demirdöğen wrote: > > On Fri, 31 Aug 2018 21:53:11 +0300 > > Numan Demirdöğen <if.gnu.linux@gmail.com> wrote: > > > > >If I put laptop to suspend or hibernate by closing lid, power > > >manager or any other method and then I resume/wake up laptop, > > >keyboard is not responding. My laptop is a Sony Vaio VPCEH2F1E. > > > > > >Steps to produce bug: > > >1. Boot > > >2. Put laptop to sleep > > >3. Resume > > > > > >What I expect to happen: Keyboard responds to key press. > > >What happens: Keyboard does not respond but mouse and trackball are > > >working. > > > > > >git bisect point 9d659ae14b545c4296e812c70493bfdc999b5c1c as the > > >first bad commit. > > > > > >Bad commit link: > > >https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=9d659ae14b545c4296e812c70493bfdc999b5c1c > > > > > > Link to actual bug report: > > >https://bugzilla.kernel.org/show_bug.cgi?id=195471 > > > > > >awk -f ver_linux > > >Linux korsan 4.18.5-arch1-1-ARCH #1 SMP PREEMPT Fri Aug 24 12:48:58 > > >UTC 2018 x86_64 GNU/Linux GNU C 8.2.0 > > >GNU Make 4.2.1 > > >Binutils 2.31.1 > > >Util-linux 2.32.1 > > >Mount 2.32.1 > > >Module-init-tools 25 > > >E2fsprogs 1.44.4 > > >Jfsutils 1.1.15 > > >Reiserfsprogs 3.6.27 > > >Xfsprogs 4.17.0 > > >Pcmciautils 018 > > >Linux C Library 2.28 > > >Dynamic linker (ldd) 2.28 > > >Linux C++ Library 6.0.25 > > >Procps 3.3.15 > > >Kbd 2.0.4 > > >Console-tools 2.0.4 > > >Sh-utils 8.29 > > >Udev 239 > > >Wireless-tools 30 > > >Modules Loaded ac agpgart ahci arc4 ath ath3k ath9k > > >ath9k_common ath9k_hw atkbd battery bluetooth bpfilter ccm cdrom > > >cfg80211 coretemp crc16 crc32c_generic crc32c_intel crc32_pclmul > > >crct10dif_pclmul cryptd drm drm_kms_helper ecdh_generic ehci_hcd > > >ehci_pci evdev ext4 fb_sys_fops fscrypto fuse ghash_clmulni_intel > > >gpio_ich hid hid_generic i2c_algo_bit i2c_i801 i8042 i915 > > >input_leds intel_cstate intel_gtt intel_powerclamp intel_rapl > > >intel_rapl_perf intel_uncore iptable_filter iptable_mangle > > >iptable_nat ip_tables irqbypass iTCO_vendor_support iTCO_wdt jbd2 > > >kvm kvm_intel led_class libahci libata libcrc32c libps2 lpc_ich > > >mac80211 mac_hid mbcache mei mei_me mousedev msr nf_conntrack > > >nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat nf_nat_ipv4 pcc_cpufreq > > >psmouse rfkill rtc_cmos scsi_mod sd_mod serio serio_raw snd > > >snd_hda_codec snd_hda_codec_conexant snd_hda_codec_generic > > >snd_hda_codec_hdmi snd_hda_core snd_hda_intel snd_hwdep snd_pcm > > >snd_timer sony_laptop soundcore sr_mod syscopyarea sysfillrect > > >sysimgblt usb_common usbcore usbhid x86_pkg_temp_thermal x_tables > > > > > >dmesg | grep i8042 > > >[ 0.574078] i8042: PNP: PS/2 Controller > > >[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.575936] > > >serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.576143] serio: > > >i8042 AUX port at 0x60,0x64 irq 12 [ 0.618880] input: AT > > >Translated Set 2 keyboard > > >as /devices/platform/i8042/serio0/input/input3 [ 11.248435] > > >input: AlpsPS/2 ALPS GlidePoint > > >as /devices/platform/i8042/serio1/input/input5 > > > > > >cat /proc/interrupts > > > CPU0 CPU1 CPU2 CPU3 > > > 0: 8 0 0 0 IO-APIC > > > 2-edge timer 1: 0 0 0 10286 > > > IO-APIC 1-edge i8042 8: 0 0 > > > 0 1 IO-APIC 8-edge rtc0 9: 0 > > > 9479 0 0 IO-APIC 9-fasteoi acpi 12: > > > 0 0 370114 0 IO-APIC 12-edge i8042 > > > 16: 197457 0 0 0 IO-APIC > > > 16-fasteoi ehci_hcd:usb1, ath9k 19: 0 0 > > > 0 0 IO-APIC 19-fasteoi i801_smbus 23: > > > 0 0 71055 0 IO-APIC 23-fasteoi > > > ehci_hcd:usb2 24: 0 74549 0 0 > > > PCI-MSI 512000-edge ahci[0000:00:1f.2] 25: 0 > > > 14 0 0 PCI-MSI 360448-edge mei_me > > > 26: 0 0 138870 0 PCI-MSI > > > 32768-edge i915 27: 0 0 0 > > > 330 PCI-MSI 442368-edge snd_hda_intel:card0 > > >NMI: 24 22 25 21 Non-maskable > > >interrupts LOC: 534734 446934 603337 440320 Local > > >timer interrupts SPU: 0 0 0 0 > > >Spurious interrupts PMI: 24 22 25 > > >21 Performance monitoring interrupts IWI: 26 12 > > >43115 22 IRQ work interrupts RTR: 0 > > >0 0 0 APIC ICR read retries RES: 95282 > > >76970 60242 46409 Rescheduling interrupts CAL: > > >66746 75300 70554 69119 Function call interrupts > > >TLB: 50929 54528 51413 48017 TLB shootdowns > > >TRM: 0 0 0 0 Thermal event > > >interrupts THR: 0 0 0 0 > > >Threshold APIC interrupts DFR: 0 0 > > >0 0 Deferred Error APIC interrupts MCE: 0 > > >0 0 0 Machine check exceptions MCP: > > >18 19 19 19 Machine check polls > > >HYP: 0 0 0 0 Hypervisor > > >callback interrupts HRE: 0 0 0 > > >0 Hyper-V reenlightenment interrupts HVS: 0 0 > > >0 0 Hyper-V stimer0 interrupts ERR: 0 > > >MIS: 0 PIN: 0 0 0 0 > > >Posted-interrupt notification event NPI: 0 > > >0 0 0 Nested posted-interrupt event PIW: > > >0 0 0 0 Posted-interrupt wakeup event > > > > > >P.S: My native language is not English. > > > > > > > Hi, > > > > I am forwarding this e-mail which describes a problem related to > > suspend/hibernate at the advise of Pavel Machek. > > [-- Attachment #2: Dijital OpenPGP imzası --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [regression, bisected] Keyboard not responding after resuming from suspend/hibernate 2018-10-28 19:06 ` Numan Demirdöğen @ 2018-11-30 12:44 ` Numan Demirdöğen 2018-12-02 22:28 ` Pavel Machek 0 siblings, 1 reply; 13+ messages in thread From: Numan Demirdöğen @ 2018-11-30 12:44 UTC (permalink / raw) To: Pavel Machek Cc: jason.low2, Waiman.Long, paulmck, tglx, dmitry.torokhov, peterz, mingo, linux-kernel, linux-input, Pavel Machek, Waiman.Long, paulmck, tglx, dmitry.torokhov, peterz, mingo [-- Attachment #1: Type: text/plain, Size: 1707 bytes --] Sun, 28 Oct 2018 22:06:54 +0300 tarihinde Numan Demirdöğen <if.gnu.linux@gmail.com> yazdı: >Thu, 25 Oct 2018 09:49:03 +0200 tarihinde >Pavel Machek <pavel@ucw.cz> yazdı: > >> Hi! >> >> Here's problem bisected down to: >> >> commit 9d659ae14b545c4296e812c70493bfdc999b5c1c >> Author: Peter Zijlstra <peterz@infradead.org> >> Date: Tue Aug 23 14:40:16 2016 +0200 >> >> locking/mutex: Add lock handoff to avoid starvation >> >> Implement lock handoff to avoid lock starvation. >> >> Numan, I assume revert of that patch on the 4.18 kernel still makes >> it work? >> > >Unfortunately, I could not revert >9d659ae14b545c4296e812c70493bfdc999b5c1c on kernels from 4.18.16 to >4.10-rc1 because there were too much conflicts, which I could not solve >as an "average Joe". I tried a3ea3d9b865c2a8f7fe455c7fa26db4b6fd066e3 >which is parent of 9d659ae14b545c4296e812c70493bfdc999b5c1c and >succeeded to compile kernel. > >git checkout a3ea3d9b865c2a8f7fe455c7fa26db4b6fd066e3 > >Then, I compiled kernel and rebooted with it. I tried a couples of >times suspending and resuming, all of the time keyboard worked as >expected. > With this one line patch from Takashi Iwai, keyboard is working as expected after resuming from suspend/hibernate. --- a/kernel/locking/mutex.c +++ b/kernel/locking/mutex.c @@ -59,7 +59,7 @@ EXPORT_SYMBOL(__mutex_init); * Bit2 indicates handoff has been done and we're waiting for pickup. */ #define MUTEX_FLAG_WAITERS 0x01 -#define MUTEX_FLAG_HANDOFF 0x02 +#define MUTEX_FLAG_HANDOFF 0x00 #define MUTEX_FLAG_PICKUP 0x04 #define MUTEX_FLAGS 0x07 Thanks in advance and regards, -- Numan Demirdöğen [-- Attachment #2: Dijital OpenPGP imzası --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [regression, bisected] Keyboard not responding after resuming from suspend/hibernate 2018-11-30 12:44 ` Numan Demirdöğen @ 2018-12-02 22:28 ` Pavel Machek 2018-12-18 7:23 ` Numan Demirdöğen 0 siblings, 1 reply; 13+ messages in thread From: Pavel Machek @ 2018-12-02 22:28 UTC (permalink / raw) To: Numan Demirdöğen Cc: jason.low2, Waiman.Long, paulmck, tglx, dmitry.torokhov, peterz, mingo, linux-kernel, linux-input [-- Attachment #1: Type: text/plain, Size: 2151 bytes --] On Fri 2018-11-30 15:44:55, Numan Demirdöğen wrote: > Sun, 28 Oct 2018 22:06:54 +0300 tarihinde > Numan Demirdöğen <if.gnu.linux@gmail.com> yazdı: > > >Thu, 25 Oct 2018 09:49:03 +0200 tarihinde > >Pavel Machek <pavel@ucw.cz> yazdı: > > > >> Hi! > >> > >> Here's problem bisected down to: > >> > >> commit 9d659ae14b545c4296e812c70493bfdc999b5c1c > >> Author: Peter Zijlstra <peterz@infradead.org> > >> Date: Tue Aug 23 14:40:16 2016 +0200 > >> > >> locking/mutex: Add lock handoff to avoid starvation > >> > >> Implement lock handoff to avoid lock starvation. > >> > >> Numan, I assume revert of that patch on the 4.18 kernel still makes > >> it work? > >> > > > >Unfortunately, I could not revert > >9d659ae14b545c4296e812c70493bfdc999b5c1c on kernels from 4.18.16 to > >4.10-rc1 because there were too much conflicts, which I could not solve > >as an "average Joe". I tried a3ea3d9b865c2a8f7fe455c7fa26db4b6fd066e3 > >which is parent of 9d659ae14b545c4296e812c70493bfdc999b5c1c and > >succeeded to compile kernel. > > > >git checkout a3ea3d9b865c2a8f7fe455c7fa26db4b6fd066e3 > > > >Then, I compiled kernel and rebooted with it. I tried a couples of > >times suspending and resuming, all of the time keyboard worked as > >expected. > > > > With this one line patch from Takashi Iwai, keyboard is working as > expected after resuming from suspend/hibernate. > > --- a/kernel/locking/mutex.c > +++ b/kernel/locking/mutex.c > @@ -59,7 +59,7 @@ EXPORT_SYMBOL(__mutex_init); > * Bit2 indicates handoff has been done and we're waiting for pickup. > */ > #define MUTEX_FLAG_WAITERS 0x01 > -#define MUTEX_FLAG_HANDOFF 0x02 > +#define MUTEX_FLAG_HANDOFF 0x00 > #define MUTEX_FLAG_PICKUP 0x04 > > #define MUTEX_FLAGS 0x07 > > > Thanks in advance and regards, Ok. So it is a regression, and you can ask Linus to apply this .. but... that's kind of heavy solution. Peter, do you have any other ideas? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 181 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [regression, bisected] Keyboard not responding after resuming from suspend/hibernate 2018-12-02 22:28 ` Pavel Machek @ 2018-12-18 7:23 ` Numan Demirdöğen 2019-03-14 19:54 ` Peter Zijlstra 0 siblings, 1 reply; 13+ messages in thread From: Numan Demirdöğen @ 2018-12-18 7:23 UTC (permalink / raw) To: Pavel Machek Cc: jason.low2, Waiman.Long, paulmck, tglx, dmitry.torokhov, peterz, mingo, linux-kernel, linux-input [-- Attachment #1: Type: text/plain, Size: 2660 bytes --] Sun, 2 Dec 2018 23:28:09 +0100 tarihinde Pavel Machek <pavel@ucw.cz> yazdı: >On Fri 2018-11-30 15:44:55, Numan Demirdöğen wrote: >> Sun, 28 Oct 2018 22:06:54 +0300 tarihinde >> Numan Demirdöğen <if.gnu.linux@gmail.com> yazdı: >> >> >Thu, 25 Oct 2018 09:49:03 +0200 tarihinde >> >Pavel Machek <pavel@ucw.cz> yazdı: >> > >> >> Hi! >> >> >> >> Here's problem bisected down to: >> >> >> >> commit 9d659ae14b545c4296e812c70493bfdc999b5c1c >> >> Author: Peter Zijlstra <peterz@infradead.org> >> >> Date: Tue Aug 23 14:40:16 2016 +0200 >> >> >> >> locking/mutex: Add lock handoff to avoid starvation >> >> >> >> Implement lock handoff to avoid lock starvation. >> >> >> >> Numan, I assume revert of that patch on the 4.18 kernel still >> >> makes it work? >> >> >> > >> >Unfortunately, I could not revert >> >9d659ae14b545c4296e812c70493bfdc999b5c1c on kernels from 4.18.16 to >> >4.10-rc1 because there were too much conflicts, which I could not >> >solve as an "average Joe". I tried >> >a3ea3d9b865c2a8f7fe455c7fa26db4b6fd066e3 which is parent of >> >9d659ae14b545c4296e812c70493bfdc999b5c1c and succeeded to compile >> >kernel. >> > >> >git checkout a3ea3d9b865c2a8f7fe455c7fa26db4b6fd066e3 >> > >> >Then, I compiled kernel and rebooted with it. I tried a couples of >> >times suspending and resuming, all of the time keyboard worked as >> >expected. >> > >> >> With this one line patch from Takashi Iwai, keyboard is working as >> expected after resuming from suspend/hibernate. >> >> --- a/kernel/locking/mutex.c >> +++ b/kernel/locking/mutex.c >> @@ -59,7 +59,7 @@ EXPORT_SYMBOL(__mutex_init); >> * Bit2 indicates handoff has been done and we're waiting for >> pickup. */ >> #define MUTEX_FLAG_WAITERS 0x01 >> -#define MUTEX_FLAG_HANDOFF 0x02 >> +#define MUTEX_FLAG_HANDOFF 0x00 >> #define MUTEX_FLAG_PICKUP 0x04 >> >> #define MUTEX_FLAGS 0x07 >> >> >> Thanks in advance and regards, > >Ok. So it is a regression, and you can ask Linus to apply this >.. but... that's kind of heavy solution. Peter, do you have any other >ideas? > > Pavel Hi, I did not mention the one line patch from Takashi Iwai as a means of fix but as a hint. Sorry for misunderstanding. Here is a another hint from another user: I found that passing the options i8042.reset=1 i8042.dumbkbd=1 i8042.direct=1 results in the keyboard functioning after resume. However, there is a long delay before the keyboard or mouse will respond to input on the lock screen.[1] [1] https://bugzilla.kernel.org/show_bug.cgi?id=195471#c39 -- Numan Demirdöğen [-- Attachment #2: Dijital OpenPGP imzası --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [regression, bisected] Keyboard not responding after resuming from suspend/hibernate 2018-12-18 7:23 ` Numan Demirdöğen @ 2019-03-14 19:54 ` Peter Zijlstra 0 siblings, 0 replies; 13+ messages in thread From: Peter Zijlstra @ 2019-03-14 19:54 UTC (permalink / raw) To: Numan Demirdöğen Cc: Pavel Machek, jason.low2, Waiman.Long, paulmck, tglx, dmitry.torokhov, mingo, linux-kernel, linux-input On Tue, Dec 18, 2018 at 10:23:02AM +0300, Numan Demirdöğen wrote: > I found that passing the options i8042.reset=1 i8042.dumbkbd=1 i8042.direct=1 > results in the keyboard functioning after resume. However, there is a > long delay before the keyboard or mouse will respond to input on the > lock screen.[1] So the thing is, the mutex works, there's nothing wrong or broken about it (or we'd have known, the kernel would crash and burn). The hand-off stuff fixed at least one known starvation case as well. What it does do, is change timing behaviour. But that is something that is not guaranteed anyway. This all smells like there's some timing dependent behaviour (aka. race condition) in the suspend/keyboard interaction _somewhere_. Now, I know absolutely nothing about either suspend or keyboard stuff, so I really can't help there. The best idea is to add trace_printk() throughout the keyboard suspend/resume code and see if there's a clue to be had there (using remote access to dump the trace buffer after resume, because of lack of keyboard). Obviously that takes someone who knows how that should work ... ^ permalink raw reply [flat|nested] 13+ messages in thread
* [regression, bisected] Keyboard not responding after resuming from suspend/hibernate @ 2019-07-31 9:07 Numan Demirdöğen 0 siblings, 0 replies; 13+ messages in thread From: Numan Demirdöğen @ 2019-07-31 9:07 UTC (permalink / raw) To: linux-kernel If laptop is put to suspend or hibernate by closing lid, via power manager or by using any other method and then it is resumed/waked up, keyboard is not responding but mouse or trackball can be used. Although I can wake laptop up by keyboard, after that I am stuck at the password prompt. This bug is present ever since using 4.10-rc1 kernel and mostly on Sony laptops. The last working kernel version is 4.9.0-rc2. git bisect points 9d659ae14b545c4296e812c70493bfdc999b5c1c as the first bad commit[1]. I tried some kernel parameters related to i8042 driver: i8042.debug=1 i8042.reset=1 keyboard not working i8042.debug=1 i8042.kbdreset=1 keyboard not working i8042.debug=1 i8042.nomux=1 keyboard not working i8042.debug=1 i8042.noaux=1 keyboard working, but touchpad not working A user reported that on some rare occasions, keyboard responded to key press but it remained pressed forever even if stopped pressing it. And another user reported that passing the options i8042.reset=1 i8042.dumbkbd=1 i8042.direct=1 resulted in the keyboard functioning after resume. However, there was a long delay before the keyboard or mouse responded to input on the lock screen. This one line patch, which can be a hint, from Takashi Iwai essentially reverts the commit 9d659ae14b545 mentioned in the above and keyboard is working as expected after resuming from suspend/hibernate, if this patch is applied. --- a/kernel/locking/mutex.c +++ b/kernel/locking/mutex.c @@ -59,7 +59,7 @@ EXPORT_SYMBOL(__mutex_init); * Bit2 indicates handoff has been done and we're waiting for pickup. */ #define MUTEX_FLAG_WAITERS 0x01 -#define MUTEX_FLAG_HANDOFF 0x02 +#define MUTEX_FLAG_HANDOFF 0x00 #define MUTEX_FLAG_PICKUP 0x04 #define MUTEX_FLAGS 0x07 - The first bug report on bugzilla.kernel.org[2]. - LKML thread[3] - Another report on OpenSUSE bugzilla[4] [1] https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=9d659ae14b545c4296e812c70493bfdc999b5c1c [2] https://bugzilla.kernel.org/show_bug.cgi?id=195471 [3] https://lkml.org/lkml/2018/8/31/707 [4] https://bugzilla.opensuse.org/show_bug.cgi?id=1114588 ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2019-07-31 9:07 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-08-31 18:53 PROBLEM: Keyboard not responding after resuming from suspend/hibernate Numan Demirdöğen 2018-08-31 19:16 ` Peter Zijlstra 2018-08-31 19:38 ` Numan Demirdöğen 2018-09-03 8:53 ` Numan Demirdöğen 2018-09-18 18:54 ` Pavel Machek 2018-10-19 7:20 ` Fw: " Numan Demirdöğen 2018-10-25 7:49 ` [regression, bisected] " Pavel Machek 2018-10-28 19:06 ` Numan Demirdöğen 2018-11-30 12:44 ` Numan Demirdöğen 2018-12-02 22:28 ` Pavel Machek 2018-12-18 7:23 ` Numan Demirdöğen 2019-03-14 19:54 ` Peter Zijlstra 2019-07-31 9:07 Numan Demirdöğen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).