[PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant

[PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner@bq.com>

The bq24196 is another variant of the bq24190 charger ic.
Its register set is identical to the bq24192 and it even reuses
the same part number (0x5).

Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
---
This should go on top of the bq24192 support patches from Brian Masney /
Jonathan Marek [0]

[0] https://patchwork.kernel.org/patch/10663409/

changes in v2:
- add missing compatible to dt-binding

 Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 +
 drivers/power/supply/bq24190_charger.c                     | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
index c8ac028bd3c7..ffe2be408bb6 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
@@ -5,6 +5,7 @@ Required properties:
     * "ti,bq24190"
     * "ti,bq24192"
     * "ti,bq24192i"
+    * "ti,bq24196"
 - reg: integer, I2C address of the charger.
 - interrupts[-extended]: configuration for charger INT pin.
 
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 4e64e6ac95c5..effa7c3c21e6 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -143,7 +143,7 @@
 #define BQ24190_REG_VPRS_PN_MASK		(BIT(5) | BIT(4) | BIT(3))
 #define BQ24190_REG_VPRS_PN_SHIFT		3
 #define BQ24190_REG_VPRS_PN_24190			0x4
-#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193 */
+#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193, 24196 */
 #define BQ24190_REG_VPRS_PN_24192I			0x3
 #define BQ24190_REG_VPRS_TS_PROFILE_MASK	BIT(2)
 #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT	2
@@ -1973,6 +1973,7 @@ static const struct i2c_device_id bq24190_i2c_ids[] = {
 	{ "bq24190" },
 	{ "bq24192" },
 	{ "bq24192i" },
+	{ "bq24196" },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
@@ -1982,6 +1983,7 @@ static const struct of_device_id bq24190_of_match[] = {
 	{ .compatible = "ti,bq24190", },
 	{ .compatible = "ti,bq24192", },
 	{ .compatible = "ti,bq24192i", },
+	{ .compatible = "ti,bq24196", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bq24190_of_match);
-- 
2.18.0

Re: [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant

[Rob Herring]

On Tue, 13 Nov 2018 13:47:53 +0100, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@bq.com>
> 
> The bq24196 is another variant of the bq24190 charger ic.
> Its register set is identical to the bq24192 and it even reuses
> the same part number (0x5).
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
> ---
> This should go on top of the bq24192 support patches from Brian Masney /
> Jonathan Marek [0]
> 
> [0] https://patchwork.kernel.org/patch/10663409/
> 
> changes in v2:
> - add missing compatible to dt-binding
> 
>  Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 +
>  drivers/power/supply/bq24190_charger.c                     | 4 +++-
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant

[Heiko Stuebner]

Hi Sebastian,

Am Dienstag, 13. November 2018, 13:47:53 CET schrieb Heiko Stuebner:
> From: Heiko Stuebner <heiko.stuebner@bq.com>
> 
> The bq24196 is another variant of the bq24190 charger ic.
> Its register set is identical to the bq24192 and it even reuses
> the same part number (0x5).
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>

any opinion on the underlying bq24192 and this bq24196 support?
It's a month now for Brian's patches and 2 weeks for my small bq24196
addition, so it would be cool to know if there needs to be done more
to get it included.


Thanks
Heiko

> ---
> This should go on top of the bq24192 support patches from Brian Masney /
> Jonathan Marek [0]
> 
> [0] https://patchwork.kernel.org/patch/10663409/
> 
> changes in v2:
> - add missing compatible to dt-binding
> 
>  Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 +
>  drivers/power/supply/bq24190_charger.c                     | 4 +++-
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> index c8ac028bd3c7..ffe2be408bb6 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
> +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> @@ -5,6 +5,7 @@ Required properties:
>      * "ti,bq24190"
>      * "ti,bq24192"
>      * "ti,bq24192i"
> +    * "ti,bq24196"
>  - reg: integer, I2C address of the charger.
>  - interrupts[-extended]: configuration for charger INT pin.
>  
> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
> index 4e64e6ac95c5..effa7c3c21e6 100644
> --- a/drivers/power/supply/bq24190_charger.c
> +++ b/drivers/power/supply/bq24190_charger.c
> @@ -143,7 +143,7 @@
>  #define BQ24190_REG_VPRS_PN_MASK		(BIT(5) | BIT(4) | BIT(3))
>  #define BQ24190_REG_VPRS_PN_SHIFT		3
>  #define BQ24190_REG_VPRS_PN_24190			0x4
> -#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193 */
> +#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193, 24196 */
>  #define BQ24190_REG_VPRS_PN_24192I			0x3
>  #define BQ24190_REG_VPRS_TS_PROFILE_MASK	BIT(2)
>  #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT	2
> @@ -1973,6 +1973,7 @@ static const struct i2c_device_id bq24190_i2c_ids[] = {
>  	{ "bq24190" },
>  	{ "bq24192" },
>  	{ "bq24192i" },
> +	{ "bq24196" },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
> @@ -1982,6 +1983,7 @@ static const struct of_device_id bq24190_of_match[] = {
>  	{ .compatible = "ti,bq24190", },
>  	{ .compatible = "ti,bq24192", },
>  	{ .compatible = "ti,bq24192i", },
> +	{ .compatible = "ti,bq24196", },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, bq24190_of_match);
> 

Re: [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 2599 bytes --]

Hi,

On Tue, Nov 13, 2018 at 01:47:53PM +0100, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@bq.com>
> 
> The bq24196 is another variant of the bq24190 charger ic.
> Its register set is identical to the bq24192 and it even reuses
> the same part number (0x5).
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
> ---

Thanks, queued.

-- Sebastian

> This should go on top of the bq24192 support patches from Brian Masney /
> Jonathan Marek [0]
> 
> [0] https://patchwork.kernel.org/patch/10663409/
> 
> changes in v2:
> - add missing compatible to dt-binding
> 
>  Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 +
>  drivers/power/supply/bq24190_charger.c                     | 4 +++-
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> index c8ac028bd3c7..ffe2be408bb6 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
> +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> @@ -5,6 +5,7 @@ Required properties:
>      * "ti,bq24190"
>      * "ti,bq24192"
>      * "ti,bq24192i"
> +    * "ti,bq24196"
>  - reg: integer, I2C address of the charger.
>  - interrupts[-extended]: configuration for charger INT pin.
>  
> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
> index 4e64e6ac95c5..effa7c3c21e6 100644
> --- a/drivers/power/supply/bq24190_charger.c
> +++ b/drivers/power/supply/bq24190_charger.c
> @@ -143,7 +143,7 @@
>  #define BQ24190_REG_VPRS_PN_MASK		(BIT(5) | BIT(4) | BIT(3))
>  #define BQ24190_REG_VPRS_PN_SHIFT		3
>  #define BQ24190_REG_VPRS_PN_24190			0x4
> -#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193 */
> +#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193, 24196 */
>  #define BQ24190_REG_VPRS_PN_24192I			0x3
>  #define BQ24190_REG_VPRS_TS_PROFILE_MASK	BIT(2)
>  #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT	2
> @@ -1973,6 +1973,7 @@ static const struct i2c_device_id bq24190_i2c_ids[] = {
>  	{ "bq24190" },
>  	{ "bq24192" },
>  	{ "bq24192i" },
> +	{ "bq24196" },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
> @@ -1982,6 +1983,7 @@ static const struct of_device_id bq24190_of_match[] = {
>  	{ .compatible = "ti,bq24190", },
>  	{ .compatible = "ti,bq24192", },
>  	{ .compatible = "ti,bq24192i", },
> +	{ .compatible = "ti,bq24196", },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, bq24190_of_match);
> -- 
> 2.18.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]