linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant
@ 2018-11-13 12:47 Heiko Stuebner
  2018-11-17 15:44 ` Rob Herring
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Heiko Stuebner @ 2018-11-13 12:47 UTC (permalink / raw)
  To: sre
  Cc: robh+dt, mark.rutland, linux-pm, devicetree, linux-kernel, mdf,
	heiko, Heiko Stuebner

From: Heiko Stuebner <heiko.stuebner@bq.com>

The bq24196 is another variant of the bq24190 charger ic.
Its register set is identical to the bq24192 and it even reuses
the same part number (0x5).

Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
---
This should go on top of the bq24192 support patches from Brian Masney /
Jonathan Marek [0]

[0] https://patchwork.kernel.org/patch/10663409/

changes in v2:
- add missing compatible to dt-binding

 Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 +
 drivers/power/supply/bq24190_charger.c                     | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
index c8ac028bd3c7..ffe2be408bb6 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
@@ -5,6 +5,7 @@ Required properties:
     * "ti,bq24190"
     * "ti,bq24192"
     * "ti,bq24192i"
+    * "ti,bq24196"
 - reg: integer, I2C address of the charger.
 - interrupts[-extended]: configuration for charger INT pin.
 
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 4e64e6ac95c5..effa7c3c21e6 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -143,7 +143,7 @@
 #define BQ24190_REG_VPRS_PN_MASK		(BIT(5) | BIT(4) | BIT(3))
 #define BQ24190_REG_VPRS_PN_SHIFT		3
 #define BQ24190_REG_VPRS_PN_24190			0x4
-#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193 */
+#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193, 24196 */
 #define BQ24190_REG_VPRS_PN_24192I			0x3
 #define BQ24190_REG_VPRS_TS_PROFILE_MASK	BIT(2)
 #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT	2
@@ -1973,6 +1973,7 @@ static const struct i2c_device_id bq24190_i2c_ids[] = {
 	{ "bq24190" },
 	{ "bq24192" },
 	{ "bq24192i" },
+	{ "bq24196" },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
@@ -1982,6 +1983,7 @@ static const struct of_device_id bq24190_of_match[] = {
 	{ .compatible = "ti,bq24190", },
 	{ .compatible = "ti,bq24192", },
 	{ .compatible = "ti,bq24192i", },
+	{ .compatible = "ti,bq24196", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bq24190_of_match);
-- 
2.18.0


^ permalink raw reply related	[flat|nested] 4+ messages in thread
* Re: [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant
  2018-11-13 12:47 [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant Heiko Stuebner
@ 2018-11-17 15:44 ` Rob Herring
  2018-11-29 14:07 ` Heiko Stuebner
  2018-12-05 22:03 ` Sebastian Reichel
  2 siblings, 0 replies; 4+ messages in thread
From: Rob Herring @ 2018-11-17 15:44 UTC (permalink / raw)
  To: Heiko Stuebner
  Cc: sre, robh+dt, mark.rutland, linux-pm, devicetree, linux-kernel,
	mdf, heiko, Heiko Stuebner

On Tue, 13 Nov 2018 13:47:53 +0100, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@bq.com>
> 
> The bq24196 is another variant of the bq24190 charger ic.
> Its register set is identical to the bq24192 and it even reuses
> the same part number (0x5).
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
> ---
> This should go on top of the bq24192 support patches from Brian Masney /
> Jonathan Marek [0]
> 
> [0] https://patchwork.kernel.org/patch/10663409/
> 
> changes in v2:
> - add missing compatible to dt-binding
> 
>  Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 +
>  drivers/power/supply/bq24190_charger.c                     | 4 +++-
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant
  2018-11-13 12:47 [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant Heiko Stuebner
  2018-11-17 15:44 ` Rob Herring
@ 2018-11-29 14:07 ` Heiko Stuebner
  2018-12-05 22:03 ` Sebastian Reichel
  2 siblings, 0 replies; 4+ messages in thread
From: Heiko Stuebner @ 2018-11-29 14:07 UTC (permalink / raw)
  To: sre; +Cc: robh+dt, mark.rutland, linux-pm, devicetree, linux-kernel, mdf

Hi Sebastian,

Am Dienstag, 13. November 2018, 13:47:53 CET schrieb Heiko Stuebner:
> From: Heiko Stuebner <heiko.stuebner@bq.com>
> 
> The bq24196 is another variant of the bq24190 charger ic.
> Its register set is identical to the bq24192 and it even reuses
> the same part number (0x5).
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>

any opinion on the underlying bq24192 and this bq24196 support?
It's a month now for Brian's patches and 2 weeks for my small bq24196
addition, so it would be cool to know if there needs to be done more
to get it included.


Thanks
Heiko

> ---
> This should go on top of the bq24192 support patches from Brian Masney /
> Jonathan Marek [0]
> 
> [0] https://patchwork.kernel.org/patch/10663409/
> 
> changes in v2:
> - add missing compatible to dt-binding
> 
>  Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 +
>  drivers/power/supply/bq24190_charger.c                     | 4 +++-
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> index c8ac028bd3c7..ffe2be408bb6 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
> +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> @@ -5,6 +5,7 @@ Required properties:
>      * "ti,bq24190"
>      * "ti,bq24192"
>      * "ti,bq24192i"
> +    * "ti,bq24196"
>  - reg: integer, I2C address of the charger.
>  - interrupts[-extended]: configuration for charger INT pin.
>  
> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
> index 4e64e6ac95c5..effa7c3c21e6 100644
> --- a/drivers/power/supply/bq24190_charger.c
> +++ b/drivers/power/supply/bq24190_charger.c
> @@ -143,7 +143,7 @@
>  #define BQ24190_REG_VPRS_PN_MASK		(BIT(5) | BIT(4) | BIT(3))
>  #define BQ24190_REG_VPRS_PN_SHIFT		3
>  #define BQ24190_REG_VPRS_PN_24190			0x4
> -#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193 */
> +#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193, 24196 */
>  #define BQ24190_REG_VPRS_PN_24192I			0x3
>  #define BQ24190_REG_VPRS_TS_PROFILE_MASK	BIT(2)
>  #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT	2
> @@ -1973,6 +1973,7 @@ static const struct i2c_device_id bq24190_i2c_ids[] = {
>  	{ "bq24190" },
>  	{ "bq24192" },
>  	{ "bq24192i" },
> +	{ "bq24196" },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
> @@ -1982,6 +1983,7 @@ static const struct of_device_id bq24190_of_match[] = {
>  	{ .compatible = "ti,bq24190", },
>  	{ .compatible = "ti,bq24192", },
>  	{ .compatible = "ti,bq24192i", },
> +	{ .compatible = "ti,bq24196", },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, bq24190_of_match);
> 





^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant
  2018-11-13 12:47 [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant Heiko Stuebner
  2018-11-17 15:44 ` Rob Herring
  2018-11-29 14:07 ` Heiko Stuebner
@ 2018-12-05 22:03 ` Sebastian Reichel
  2 siblings, 0 replies; 4+ messages in thread
From: Sebastian Reichel @ 2018-12-05 22:03 UTC (permalink / raw)
  To: Heiko Stuebner
  Cc: robh+dt, mark.rutland, linux-pm, devicetree, linux-kernel, mdf,
	Heiko Stuebner

[-- Attachment #1: Type: text/plain, Size: 2599 bytes --]

Hi,

On Tue, Nov 13, 2018 at 01:47:53PM +0100, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@bq.com>
> 
> The bq24196 is another variant of the bq24190 charger ic.
> Its register set is identical to the bq24192 and it even reuses
> the same part number (0x5).
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
> ---

Thanks, queued.

-- Sebastian

> This should go on top of the bq24192 support patches from Brian Masney /
> Jonathan Marek [0]
> 
> [0] https://patchwork.kernel.org/patch/10663409/
> 
> changes in v2:
> - add missing compatible to dt-binding
> 
>  Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 +
>  drivers/power/supply/bq24190_charger.c                     | 4 +++-
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> index c8ac028bd3c7..ffe2be408bb6 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
> +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> @@ -5,6 +5,7 @@ Required properties:
>      * "ti,bq24190"
>      * "ti,bq24192"
>      * "ti,bq24192i"
> +    * "ti,bq24196"
>  - reg: integer, I2C address of the charger.
>  - interrupts[-extended]: configuration for charger INT pin.
>  
> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
> index 4e64e6ac95c5..effa7c3c21e6 100644
> --- a/drivers/power/supply/bq24190_charger.c
> +++ b/drivers/power/supply/bq24190_charger.c
> @@ -143,7 +143,7 @@
>  #define BQ24190_REG_VPRS_PN_MASK		(BIT(5) | BIT(4) | BIT(3))
>  #define BQ24190_REG_VPRS_PN_SHIFT		3
>  #define BQ24190_REG_VPRS_PN_24190			0x4
> -#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193 */
> +#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193, 24196 */
>  #define BQ24190_REG_VPRS_PN_24192I			0x3
>  #define BQ24190_REG_VPRS_TS_PROFILE_MASK	BIT(2)
>  #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT	2
> @@ -1973,6 +1973,7 @@ static const struct i2c_device_id bq24190_i2c_ids[] = {
>  	{ "bq24190" },
>  	{ "bq24192" },
>  	{ "bq24192i" },
> +	{ "bq24196" },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
> @@ -1982,6 +1983,7 @@ static const struct of_device_id bq24190_of_match[] = {
>  	{ .compatible = "ti,bq24190", },
>  	{ .compatible = "ti,bq24192", },
>  	{ .compatible = "ti,bq24192i", },
> +	{ .compatible = "ti,bq24196", },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, bq24190_of_match);
> -- 
> 2.18.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-12-05 22:03 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-13 12:47 [PATCH v2] power: supply: bq24190_charger: add support for bq24196 variant Heiko Stuebner
2018-11-17 15:44 ` Rob Herring
2018-11-29 14:07 ` Heiko Stuebner
2018-12-05 22:03 ` Sebastian Reichel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).