LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/4] ARM: dts: rockchip: Add missing dma-names SPI support for rv1108
@ 2019-01-04  1:40 Otavio Salvador
  2019-01-04  1:40 ` [PATCH 2/4] ARM: dts: rockchip: rv1108: Add spim0 and spim1 pinctrl groups Otavio Salvador
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Otavio Salvador @ 2019-01-04  1:40 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: Jason Zhu, Vicent Chi, Andy Yan, Philipp Tomsic, Otavio Salvador,
	devicetree, Heiko Stuebner, linux-kernel, linux-rockchip,
	Rob Herring, Mark Rutland

Pass the 'dma-names' property to the SPI ports so that DMA can
be supported.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---

 arch/arm/boot/dts/rv1108.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index d31370ff28f4..cb26d9d98c34 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -207,6 +207,7 @@
 		clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
 		#dma-cells = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-04  1:40 [PATCH 1/4] ARM: dts: rockchip: Add missing dma-names SPI support for rv1108 Otavio Salvador
2019-01-04  1:40 ` [PATCH 2/4] ARM: dts: rockchip: rv1108: Add spim0 and spim1 pinctrl groups Otavio Salvador
2019-01-04  1:40 ` [PATCH 3/4] dt-bindings: Add vendor prefix for elgin Otavio Salvador
2019-01-11 17:04   ` Rob Herring
2019-01-04  1:40 ` [PATCH 4/4] ARM: dts: rv1108: Add support for rv1108-elgin-r1 board Otavio Salvador
2019-01-11 19:29   ` Rob Herring
2019-01-12 20:16   ` Heiko Stuebner

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org linux-kernel@archiver.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox