linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Patrick Bellasi <patrick.bellasi@arm.com>
To: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>,
	Peter Zijlstra <peterz@infradead.org>, Tejun Heo <tj@kernel.org>,
	"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
	Vincent Guittot <vincent.guittot@linaro.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Paul Turner <pjt@google.com>,
	Quentin Perret <quentin.perret@arm.com>,
	Dietmar Eggemann <dietmar.eggemann@arm.com>,
	Morten Rasmussen <morten.rasmussen@arm.com>,
	Juri Lelli <juri.lelli@redhat.com>, Todd Kjos <tkjos@google.com>,
	Joel Fernandes <joelaf@google.com>,
	Steve Muckle <smuckle@google.com>,
	Suren Baghdasaryan <surenb@google.com>
Subject: [PATCH v7 05/15] sched/core: uclamp: Extend sched_setattr() to support utilization clamping
Date: Fri,  8 Feb 2019 10:05:44 +0000	[thread overview]
Message-ID: <20190208100554.32196-6-patrick.bellasi@arm.com> (raw)
In-Reply-To: <20190208100554.32196-1-patrick.bellasi@arm.com>

The SCHED_DEADLINE scheduling class provides an advanced and formal
model to define tasks requirements that can translate into proper
decisions for both task placements and frequencies selections. Other
classes have a more simplified model based on the POSIX concept of
priorities.

Such a simple priority based model however does not allow to exploit
most advanced features of the Linux scheduler like, for example, driving
frequencies selection via the schedutil cpufreq governor. However, also
for non SCHED_DEADLINE tasks, it's still interesting to define tasks
properties to support scheduler decisions.

Utilization clamping exposes to user-space a new set of per-task
attributes the scheduler can use as hints about the expected/required
utilization for a task. This allows to implement a "proactive" per-task
frequency control policy, a more advanced policy than the current one
based just on "passive" measured task utilization. For example, it's
possible to boost interactive tasks (e.g. to get better performance) or
cap background tasks (e.g. to be more energy/thermal efficient).

Introduce a new API to set utilization clamping values for a specified
task by extending sched_setattr(), a syscall which already allows to
define task specific properties for different scheduling classes. A new
pair of attributes allows to specify a minimum and maximum utilization
the scheduler can consider for a task.

Do that by checking and validating the required clamp values before and
then applying the required changes using _the_ same pattern already in
use for __setscheduler(). This ensures that the task is re-enqueued with
the new clamp values.

Do not allow to change sched class specific params and non class
specific params (i.e. clamp values) at the same time.  This keeps things
simple and still works for the most common cases since we are usually
interested in just one of the two actions.

Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>

---
Changes in v7:
 Message-ID: <20190124123814.GM13777@hirez.programming.kicks-ass.net>
 - split validation code from actual state changing code
 - for state changing code, use _the_ same pattern __setscheduler() and
   other code already use, i.e. dequeue-change-enqueue
 - add SCHED_FLAG_KEEP_PARAMS and use it to skip __setscheduler() when
   policy and params are not specified
---
 include/linux/sched.h            |  9 ++++
 include/uapi/linux/sched.h       | 12 ++++-
 include/uapi/linux/sched/types.h | 65 ++++++++++++++++++++----
 kernel/sched/core.c              | 87 +++++++++++++++++++++++++++++++-
 4 files changed, 161 insertions(+), 12 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index 447261cd23ba..711ea303f4c7 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -586,6 +586,7 @@ struct sched_dl_entity {
  * @bucket_id:		clamp bucket corresponding to the "requested" value
  * @effective:		clamp value and bucket actually "assigned" to the se
  * @active:		the se is currently refcounted in a rq's bucket
+ * @user_defined:	the requested clamp value comes from user-space
  *
  * Both bucket_id and effective::bucket_id are the index of the clamp bucket
  * matching the corresponding clamp value which are pre-computed and stored to
@@ -594,12 +595,20 @@ struct sched_dl_entity {
  * The active bit is set whenever a task has got an effective::value assigned,
  * which can be different from the user requested clamp value. This allows to
  * know a task is actually refcounting the rq's effective::bucket_id bucket.
+ *
+ * The user_defined bit is set whenever a task has got a task-specific clamp
+ * value requested from userspace, i.e. the system defaults apply to this task
+ * just as a restriction. This allows to relax default clamps when a less
+ * restrictive task-specific value has been requested, thus allowing to
+ * implement a "nice" semantic. For example, a task running with a 20%
+ * default boost can still drop its own boosting to 0%.
  */
 struct uclamp_se {
 	/* Clamp value "requested" by a scheduling entity */
 	unsigned int value		: bits_per(SCHED_CAPACITY_SCALE);
 	unsigned int bucket_id		: bits_per(UCLAMP_BUCKETS);
 	unsigned int active		: 1;
+	unsigned int user_defined	: 1;
 	/*
 	 * Clamp value "obtained" by a scheduling entity.
 	 *
diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h
index 075c610adf45..d2c65617a4a4 100644
--- a/include/uapi/linux/sched.h
+++ b/include/uapi/linux/sched.h
@@ -53,10 +53,20 @@
 #define SCHED_FLAG_RECLAIM		0x02
 #define SCHED_FLAG_DL_OVERRUN		0x04
 #define SCHED_FLAG_KEEP_POLICY		0x08
+#define SCHED_FLAG_KEEP_PARAMS		0x10
+#define SCHED_FLAG_UTIL_CLAMP_MIN	0x20
+#define SCHED_FLAG_UTIL_CLAMP_MAX	0x40
+
+#define SCHED_FLAG_KEEP_ALL 	(SCHED_FLAG_KEEP_POLICY | \
+				 SCHED_FLAG_KEEP_PARAMS)
+
+#define SCHED_FLAG_UTIL_CLAMP	(SCHED_FLAG_UTIL_CLAMP_MIN | \
+				 SCHED_FLAG_UTIL_CLAMP_MAX)
 
 #define SCHED_FLAG_ALL	(SCHED_FLAG_RESET_ON_FORK	| \
 			 SCHED_FLAG_RECLAIM		| \
 			 SCHED_FLAG_DL_OVERRUN		| \
-			 SCHED_FLAG_KEEP_POLICY)
+			 SCHED_FLAG_KEEP_ALL		| \
+			 SCHED_FLAG_UTIL_CLAMP)
 
 #endif /* _UAPI_LINUX_SCHED_H */
diff --git a/include/uapi/linux/sched/types.h b/include/uapi/linux/sched/types.h
index 10fbb8031930..01439e07507c 100644
--- a/include/uapi/linux/sched/types.h
+++ b/include/uapi/linux/sched/types.h
@@ -9,6 +9,7 @@ struct sched_param {
 };
 
 #define SCHED_ATTR_SIZE_VER0	48	/* sizeof first published struct */
+#define SCHED_ATTR_SIZE_VER1	56	/* add: util_{min,max} */
 
 /*
  * Extended scheduling parameters data structure.
@@ -21,8 +22,33 @@ struct sched_param {
  * the tasks may be useful for a wide variety of application fields, e.g.,
  * multimedia, streaming, automation and control, and many others.
  *
- * This variant (sched_attr) is meant at describing a so-called
- * sporadic time-constrained task. In such model a task is specified by:
+ * This variant (sched_attr) allows to define additional attributes to
+ * improve the scheduler knowledge about task requirements.
+ *
+ * Scheduling Class Attributes
+ * ===========================
+ *
+ * A subset of sched_attr attributes specifies the
+ * scheduling policy and relative POSIX attributes:
+ *
+ *  @size		size of the structure, for fwd/bwd compat.
+ *
+ *  @sched_policy	task's scheduling policy
+ *  @sched_nice		task's nice value      (SCHED_NORMAL/BATCH)
+ *  @sched_priority	task's static priority (SCHED_FIFO/RR)
+ *
+ * Certain more advanced scheduling features can be controlled by a
+ * predefined set of flags via the attribute:
+ *
+ *  @sched_flags	for customizing the scheduler behaviour
+ *
+ * Sporadic Time-Constrained Tasks Attributes
+ * ==========================================
+ *
+ * A subset of sched_attr attributes allows to describe a so-called
+ * sporadic time-constrained task.
+ *
+ * In such model a task is specified by:
  *  - the activation period or minimum instance inter-arrival time;
  *  - the maximum (or average, depending on the actual scheduling
  *    discipline) computation time of all instances, a.k.a. runtime;
@@ -34,14 +60,8 @@ struct sched_param {
  * than the runtime and must be completed by time instant t equal to
  * the instance activation time + the deadline.
  *
- * This is reflected by the actual fields of the sched_attr structure:
+ * This is reflected by the following fields of the sched_attr structure:
  *
- *  @size		size of the structure, for fwd/bwd compat.
- *
- *  @sched_policy	task's scheduling policy
- *  @sched_flags	for customizing the scheduler behaviour
- *  @sched_nice		task's nice value      (SCHED_NORMAL/BATCH)
- *  @sched_priority	task's static priority (SCHED_FIFO/RR)
  *  @sched_deadline	representative of the task's deadline
  *  @sched_runtime	representative of the task's runtime
  *  @sched_period	representative of the task's period
@@ -53,6 +73,28 @@ struct sched_param {
  * As of now, the SCHED_DEADLINE policy (sched_dl scheduling class) is the
  * only user of this new interface. More information about the algorithm
  * available in the scheduling class file or in Documentation/.
+ *
+ * Task Utilization Attributes
+ * ===========================
+ *
+ * A subset of sched_attr attributes allows to specify the utilization
+ * expected for a task. These attributes allow to inform the scheduler about
+ * the utilization boundaries within which it should schedule tasks. These
+ * boundaries are valuable hints to support scheduler decisions on both task
+ * placement and frequency selection.
+ *
+ *  @sched_util_min	represents the minimum utilization
+ *  @sched_util_max	represents the maximum utilization
+ *
+ * Utilization is a value in the range [0..SCHED_CAPACITY_SCALE]. It
+ * represents the percentage of CPU time used by a task when running at the
+ * maximum frequency on the highest capacity CPU of the system. For example, a
+ * 20% utilization task is a task running for 2ms every 10ms.
+ *
+ * A task with a min utilization value bigger than 0 is more likely scheduled
+ * on a CPU with a capacity big enough to fit the specified value.
+ * A task with a max utilization value smaller than 1024 is more likely
+ * scheduled on a CPU with no more capacity than the specified value.
  */
 struct sched_attr {
 	__u32 size;
@@ -70,6 +112,11 @@ struct sched_attr {
 	__u64 sched_runtime;
 	__u64 sched_deadline;
 	__u64 sched_period;
+
+	/* Utilization hints */
+	__u32 sched_util_min;
+	__u32 sched_util_max;
+
 };
 
 #endif /* _UAPI_LINUX_SCHED_TYPES_H */
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 26c5ede8ebca..070caa1f72eb 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1027,6 +1027,50 @@ int sysctl_sched_uclamp_handler(struct ctl_table *table, int write,
 	return result;
 }
 
+static int uclamp_validate(struct task_struct *p,
+			   const struct sched_attr *attr)
+{
+	unsigned int lower_bound = p->uclamp[UCLAMP_MIN].value;
+	unsigned int upper_bound = p->uclamp[UCLAMP_MAX].value;
+
+	if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MIN)
+		lower_bound = attr->sched_util_min;
+	if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MAX)
+		upper_bound = attr->sched_util_max;
+
+	if (lower_bound > upper_bound)
+		return -EINVAL;
+	if (upper_bound > SCHED_CAPACITY_SCALE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void __setscheduler_uclamp(struct task_struct *p,
+				  const struct sched_attr *attr)
+{
+	if (likely(!(attr->sched_flags & SCHED_FLAG_UTIL_CLAMP)))
+		return;
+
+	if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MIN) {
+		unsigned int lower_bound = attr->sched_util_min;
+
+		p->uclamp[UCLAMP_MIN].user_defined = true;
+		p->uclamp[UCLAMP_MIN].value = lower_bound;
+		p->uclamp[UCLAMP_MIN].bucket_id =
+			uclamp_bucket_id(lower_bound);
+	}
+
+	if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP_MAX) {
+		unsigned int upper_bound =  attr->sched_util_max;
+
+		p->uclamp[UCLAMP_MAX].user_defined = true;
+		p->uclamp[UCLAMP_MAX].value = upper_bound;
+		p->uclamp[UCLAMP_MAX].bucket_id =
+			uclamp_bucket_id(upper_bound);
+	}
+}
+
 static void uclamp_fork(struct task_struct *p)
 {
 	unsigned int clamp_id;
@@ -1073,6 +1117,13 @@ static void __init init_uclamp(void)
 #else /* CONFIG_UCLAMP_TASK */
 static inline void uclamp_rq_inc(struct rq *rq, struct task_struct *p) { }
 static inline void uclamp_rq_dec(struct rq *rq, struct task_struct *p) { }
+static inline int uclamp_validate(struct task_struct *p,
+				  const struct sched_attr *attr)
+{
+	return -ENODEV;
+}
+static void __setscheduler_uclamp(struct task_struct *p,
+				  const struct sched_attr *attr) { }
 static inline void uclamp_fork(struct task_struct *p) { }
 static inline void init_uclamp(void) { }
 #endif /* CONFIG_UCLAMP_TASK */
@@ -4441,6 +4492,13 @@ static void __setscheduler_params(struct task_struct *p,
 static void __setscheduler(struct rq *rq, struct task_struct *p,
 			   const struct sched_attr *attr, bool keep_boost)
 {
+	/*
+	 * If params cannot change we don't allow scheduling class
+	 * changes too.
+	 */
+	if (attr->sched_flags & SCHED_FLAG_KEEP_PARAMS)
+		return;
+
 	__setscheduler_params(p, attr);
 
 	/*
@@ -4578,6 +4636,13 @@ static int __sched_setscheduler(struct task_struct *p,
 			return retval;
 	}
 
+	/* Update task specific "requested" clamps */
+	if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP) {
+		retval = uclamp_validate(p, attr);
+		if (retval)
+			return retval;
+	}
+
 	/*
 	 * Make sure no PI-waiters arrive (or leave) while we are
 	 * changing the priority of the task:
@@ -4607,6 +4672,8 @@ static int __sched_setscheduler(struct task_struct *p,
 			goto change;
 		if (dl_policy(policy) && dl_param_changed(p, attr))
 			goto change;
+		if (attr->sched_flags & SCHED_FLAG_UTIL_CLAMP)
+			goto change;
 
 		p->sched_reset_on_fork = reset_on_fork;
 		task_rq_unlock(rq, p, &rf);
@@ -4687,7 +4754,9 @@ static int __sched_setscheduler(struct task_struct *p,
 		put_prev_task(rq, p);
 
 	prev_class = p->sched_class;
+
 	__setscheduler(rq, p, attr, pi);
+	__setscheduler_uclamp(p, attr);
 
 	if (queued) {
 		/*
@@ -4863,6 +4932,10 @@ static int sched_copy_attr(struct sched_attr __user *uattr, struct sched_attr *a
 	if (ret)
 		return -EFAULT;
 
+	if ((attr->sched_flags & SCHED_FLAG_UTIL_CLAMP) &&
+	    size < SCHED_ATTR_SIZE_VER1)
+		return -EINVAL;
+
 	/*
 	 * XXX: Do we want to be lenient like existing syscalls; or do we want
 	 * to be strict and return an error on out-of-bounds values?
@@ -4939,10 +5012,15 @@ SYSCALL_DEFINE3(sched_setattr, pid_t, pid, struct sched_attr __user *, uattr,
 	rcu_read_lock();
 	retval = -ESRCH;
 	p = find_process_by_pid(pid);
-	if (p != NULL)
-		retval = sched_setattr(p, &attr);
+	if (likely(p))
+		get_task_struct(p);
 	rcu_read_unlock();
 
+	if (likely(p)) {
+		retval = sched_setattr(p, &attr);
+		put_task_struct(p);
+	}
+
 	return retval;
 }
 
@@ -5093,6 +5171,11 @@ SYSCALL_DEFINE4(sched_getattr, pid_t, pid, struct sched_attr __user *, uattr,
 	else
 		attr.sched_nice = task_nice(p);
 
+#ifdef CONFIG_UCLAMP_TASK
+	attr.sched_util_min = p->uclamp[UCLAMP_MIN].value;
+	attr.sched_util_max = p->uclamp[UCLAMP_MAX].value;
+#endif
+
 	rcu_read_unlock();
 
 	retval = sched_read_attr(uattr, &attr, size);
-- 
2.20.1


  parent reply	other threads:[~2019-02-08 10:06 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-08 10:05 [PATCH v7 00/15] Add utilization clamping support Patrick Bellasi
2019-02-08 10:05 ` [PATCH v7 01/15] sched/core: uclamp: Add CPU's clamp buckets refcounting Patrick Bellasi
2019-03-12 12:52   ` Dietmar Eggemann
2019-03-13 15:15     ` Patrick Bellasi
2019-03-13 21:01       ` Suren Baghdasaryan
2019-03-14 14:54         ` Patrick Bellasi
2019-03-14 15:00       ` Patrick Bellasi
2019-03-12 15:20   ` Peter Zijlstra
2019-03-12 15:50     ` Patrick Bellasi
2019-03-13  8:19       ` Peter Zijlstra
2019-03-13 11:37         ` Patrick Bellasi
2019-03-13 13:40   ` Peter Zijlstra
2019-03-13 16:12     ` Patrick Bellasi
2019-03-13 17:22       ` Peter Zijlstra
2019-03-13 18:22         ` Patrick Bellasi
2019-03-13 19:48       ` Peter Zijlstra
2019-03-14 12:13         ` Patrick Bellasi
2019-03-14 13:32           ` Peter Zijlstra
2019-03-14 15:07             ` Patrick Bellasi
2019-03-14 19:18               ` Peter Zijlstra
2019-03-13 13:52   ` Peter Zijlstra
2019-03-13 15:59     ` Patrick Bellasi
2019-03-13 19:30       ` Peter Zijlstra
2019-03-14 11:03         ` Patrick Bellasi
2019-03-14 13:27           ` Peter Zijlstra
2019-03-13 19:39       ` Peter Zijlstra
2019-03-14 11:18         ` Patrick Bellasi
2019-03-13 21:23     ` Suren Baghdasaryan
2019-03-14 12:43       ` Patrick Bellasi
2019-03-13 14:06   ` Peter Zijlstra
2019-03-13 15:28     ` Patrick Bellasi
2019-03-13 14:09   ` Peter Zijlstra
2019-03-13 15:23     ` Patrick Bellasi
2019-03-13 19:46       ` Peter Zijlstra
2019-03-13 21:08         ` Suren Baghdasaryan
2019-03-14 12:22           ` Patrick Bellasi
2019-03-14 11:45         ` Patrick Bellasi
2019-03-13 21:32   ` Suren Baghdasaryan
2019-03-14 14:46     ` Patrick Bellasi
2019-03-14 15:29       ` Suren Baghdasaryan
2019-03-14 15:40         ` Patrick Bellasi
2019-03-14 16:39           ` Suren Baghdasaryan
2019-02-08 10:05 ` [PATCH v7 02/15] sched/core: uclamp: Enforce last task UCLAMP_MAX Patrick Bellasi
2019-03-13 14:10   ` Peter Zijlstra
2019-03-13 16:20     ` Patrick Bellasi
2019-03-13 17:29       ` Peter Zijlstra
2019-03-13 18:29         ` Patrick Bellasi
2019-03-13 14:12   ` Peter Zijlstra
2019-03-13 16:16     ` Patrick Bellasi
2019-03-14  0:29       ` Suren Baghdasaryan
2019-03-14 17:06         ` Patrick Bellasi
2019-02-08 10:05 ` [PATCH v7 03/15] sched/core: uclamp: Add system default clamps Patrick Bellasi
2019-03-13 14:32   ` Peter Zijlstra
2019-03-13 17:09     ` Patrick Bellasi
2019-03-13 19:58       ` Peter Zijlstra
2019-03-13 20:10       ` Peter Zijlstra
2019-03-15 13:41         ` Patrick Bellasi
2019-03-13 20:13   ` Peter Zijlstra
2019-03-13 20:18   ` Peter Zijlstra
2019-03-18 12:18     ` Patrick Bellasi
2019-03-18 13:10       ` Peter Zijlstra
2019-03-18 14:21         ` Patrick Bellasi
2019-03-18 14:29           ` Peter Zijlstra
2019-02-08 10:05 ` [PATCH v7 04/15] sched/core: Allow sched_setattr() to use the current policy Patrick Bellasi
2019-02-08 10:05 ` Patrick Bellasi [this message]
2019-02-08 10:05 ` [PATCH v7 06/15] sched/core: uclamp: Reset uclamp values on RESET_ON_FORK Patrick Bellasi
2019-03-13 20:52   ` Peter Zijlstra
2019-03-18 12:58     ` Patrick Bellasi
2019-02-08 10:05 ` [PATCH v7 07/15] sched/core: uclamp: Set default clamps for RT tasks Patrick Bellasi
2019-02-08 10:05 ` [PATCH v7 08/15] sched/cpufreq: uclamp: Add clamps for FAIR and " Patrick Bellasi
2019-02-08 10:05 ` [PATCH v7 09/15] sched/core: uclamp: Add uclamp_util_with() Patrick Bellasi
2019-02-08 10:05 ` [PATCH v7 10/15] sched/fair: uclamp: Add uclamp support to energy_compute() Patrick Bellasi
2019-03-06 17:21   ` Quentin Perret
2019-03-18 15:19     ` Patrick Bellasi
2019-02-08 10:05 ` [PATCH v7 11/15] sched/core: uclamp: Extend CPU's cgroup controller Patrick Bellasi
2019-02-14 15:48   ` Tejun Heo
2019-03-19 10:00     ` Patrick Bellasi
2019-02-08 10:05 ` [PATCH v7 12/15] sched/core: uclamp: Propagate parent clamps Patrick Bellasi
2019-03-14 16:17   ` Suren Baghdasaryan
2019-03-18 16:54     ` Patrick Bellasi
2019-03-18 16:58       ` Suren Baghdasaryan
2019-02-08 10:05 ` [PATCH v7 13/15] sched/core: uclamp: Propagate system defaults to root group Patrick Bellasi
2019-02-08 10:05 ` [PATCH v7 14/15] sched/core: uclamp: Use TG's clamps to restrict TASK's clamps Patrick Bellasi
2019-02-08 10:05 ` [PATCH v7 15/15] sched/core: uclamp: Update CPU's refcount on TG's clamp changes Patrick Bellasi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190208100554.32196-6-patrick.bellasi@arm.com \
    --to=patrick.bellasi@arm.com \
    --cc=dietmar.eggemann@arm.com \
    --cc=joelaf@google.com \
    --cc=juri.lelli@redhat.com \
    --cc=linux-api@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=morten.rasmussen@arm.com \
    --cc=peterz@infradead.org \
    --cc=pjt@google.com \
    --cc=quentin.perret@arm.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=smuckle@google.com \
    --cc=surenb@google.com \
    --cc=tj@kernel.org \
    --cc=tkjos@google.com \
    --cc=vincent.guittot@linaro.org \
    --cc=viresh.kumar@linaro.org \
    --subject='Re: [PATCH v7 05/15] sched/core: uclamp: Extend sched_setattr() to support utilization clamping' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).