* [PATCH] arm64: dts: ls1028a: add pmu dt nodes
@ 2019-02-27 1:57 Alison Wang
2019-03-04 1:48 ` Shawn Guo
0 siblings, 1 reply; 3+ messages in thread
From: Alison Wang @ 2019-02-27 1:57 UTC (permalink / raw)
To: shawnguo, leoyang.li, devicetree, linux-kernel; +Cc: alison.wang
This patch adds pmu dt nodes for LS1028A.
Signed-off-by: Alison Wang <alison.wang@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index a8cf92a..36ef9c5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -89,6 +89,11 @@
IRQ_TYPE_LEVEL_LOW)>;
};
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
gic: interrupt-controller@6000000 {
compatible= "arm,gic-v3";
#address-cells = <2>;
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: dts: ls1028a: add pmu dt nodes
2019-02-27 1:57 [PATCH] arm64: dts: ls1028a: add pmu dt nodes Alison Wang
@ 2019-03-04 1:48 ` Shawn Guo
2019-03-06 8:25 ` Alison Wang
0 siblings, 1 reply; 3+ messages in thread
From: Shawn Guo @ 2019-03-04 1:48 UTC (permalink / raw)
To: Alison Wang; +Cc: leoyang.li, devicetree, linux-kernel
On Wed, Feb 27, 2019 at 09:57:52AM +0800, Alison Wang wrote:
> This patch adds pmu dt nodes for LS1028A.
>
> Signed-off-by: Alison Wang <alison.wang@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 5 +++++
> 1 files changed, 5 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index a8cf92a..36ef9c5 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -89,6 +89,11 @@
> IRQ_TYPE_LEVEL_LOW)>;
> };
>
> + pmu {
> + compatible = "arm,armv8-pmuv3";
Shouldn't we use "arm,cortex-a72-pmu" as compatible for better?
Shawn
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> gic: interrupt-controller@6000000 {
> compatible= "arm,gic-v3";
> #address-cells = <2>;
> --
> 1.7.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH] arm64: dts: ls1028a: add pmu dt nodes
2019-03-04 1:48 ` Shawn Guo
@ 2019-03-06 8:25 ` Alison Wang
0 siblings, 0 replies; 3+ messages in thread
From: Alison Wang @ 2019-03-06 8:25 UTC (permalink / raw)
To: Shawn Guo; +Cc: Leo Li, devicetree, linux-kernel
Hi, Shawn,
> On Wed, Feb 27, 2019 at 09:57:52AM +0800, Alison Wang wrote:
> > This patch adds pmu dt nodes for LS1028A.
> >
> > Signed-off-by: Alison Wang <alison.wang@nxp.com>
> > ---
> > arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 5 +++++
> > 1 files changed, 5 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > index a8cf92a..36ef9c5 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > @@ -89,6 +89,11 @@
> > IRQ_TYPE_LEVEL_LOW)>;
> > };
> >
> > + pmu {
> > + compatible = "arm,armv8-pmuv3";
>
> Shouldn't we use "arm,cortex-a72-pmu" as compatible for better?
>
[Alison] Yes, it is better as compatible. I will change it in v2.
Thanks.
Best Regards,
Alison Wang
> Shawn
>
> > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > +
> > gic: interrupt-controller@6000000 {
> > compatible= "arm,gic-v3";
> > #address-cells = <2>;
> > --
> > 1.7.1
> >
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-03-06 8:25 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-27 1:57 [PATCH] arm64: dts: ls1028a: add pmu dt nodes Alison Wang
2019-03-04 1:48 ` Shawn Guo
2019-03-06 8:25 ` Alison Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).