From: Yu Chen <chenyu56@huawei.com>
To: <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <john.stultz@linaro.org>, <suzhuangluan@hisilicon.com>,
<kongfei@hisilicon.com>, <liuyu712@hisilicon.com>,
<wanghu17@hisilicon.com>, <butao@hisilicon.com>,
<chenyao11@huawei.com>, <fangshengzhou@hisilicon.com>,
<lipengcheng8@huawei.com>, <songxiaowei@hisilicon.com>,
<xuyiping@hisilicon.com>, <xuyoujun4@huawei.com>,
<yudongbin@hisilicon.com>, <zangleigang@hisilicon.com>,
Yu Chen <chenyu56@huawei.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Binghui Wang <wangbinghui@hisilicon.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>
Subject: [PATCH v6 11/13] hikey960: Support usb functionality of Hikey960
Date: Sat, 20 Apr 2019 14:40:17 +0800 [thread overview]
Message-ID: <20190420064019.57522-12-chenyu56@huawei.com> (raw)
In-Reply-To: <20190420064019.57522-1-chenyu56@huawei.com>
This driver handles usb hub power on and typeC port event of HiKey960 board:
1)DP&DM switching between usb hub and typeC port base on typeC port
state
2)Control power of usb hub on Hikey960
3)Control vbus of typeC port
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v1:
* Using gpiod API with the gpios.
* Removing registering usb role switch.
* Registering usb role switch notifier.
v2:
* Fix license declaration.
* Add configuration of gpio direction.
* Remove some log print.
v3:
* Remove property of "typec_vbus_enable_val".
* Remove gpiod_direction_output and set initial value of gpio by
* devm_gpiod_get.
v4:
* Remove 'linux/of.h' and add 'linux/mod_devicetable.h'.
* Remove unused 'root' of_node.
* Remove unuseful NULL check return by 'devm_gpiod_get'.
* Use 'devm_gpiod_get_optional' to get optional gpio.
---
---
drivers/misc/Kconfig | 6 ++
drivers/misc/Makefile | 1 +
drivers/misc/hisi_hikey_usb.c | 162 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 169 insertions(+)
create mode 100644 drivers/misc/hisi_hikey_usb.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 42ab8ec92a04..3b3f610b80c2 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -532,6 +532,12 @@ config PVPANIC
a paravirtualized device provided by QEMU; it lets a virtual machine
(guest) communicate panic events to the host.
+config HISI_HIKEY_USB
+ tristate "USB functionality of HiSilicon Hikey Platform"
+ depends on OF && GPIOLIB
+ help
+ If you say yes here you get support for usb functionality of HiSilicon Hikey Platform.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d5b7d3404dc7..1c6c108d3a0c 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -61,3 +61,4 @@ obj-$(CONFIG_OCXL) += ocxl/
obj-y += cardreader/
obj-$(CONFIG_PVPANIC) += pvpanic.o
obj-$(CONFIG_HABANA_AI) += habanalabs/
+obj-$(CONFIG_HISI_HIKEY_USB) += hisi_hikey_usb.o
diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c
new file mode 100644
index 000000000000..a3bb46266f04
--- /dev/null
+++ b/drivers/misc/hisi_hikey_usb.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for usb functionality of Hikey series boards
+ * based on Hisilicon Kirin Soc.
+ *
+ * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
+ * http://www.huawei.com
+ *
+ * Authors: Yu Chen <chenyu56@huawei.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/usb/role.h>
+
+#define DEVICE_DRIVER_NAME "hisi_hikey_usb"
+
+#define HUB_VBUS_POWER_ON 1
+#define HUB_VBUS_POWER_OFF 0
+#define USB_SWITCH_TO_HUB 1
+#define USB_SWITCH_TO_TYPEC 0
+#define TYPEC_VBUS_POWER_ON 1
+#define TYPEC_VBUS_POWER_OFF 0
+
+struct hisi_hikey_usb {
+ struct gpio_desc *otg_switch;
+ struct gpio_desc *typec_vbus;
+ struct gpio_desc *hub_vbus;
+
+ struct usb_role_switch *role_sw;
+ struct notifier_block nb;
+};
+
+static void hub_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb, int value)
+{
+ gpiod_set_value_cansleep(hisi_hikey_usb->hub_vbus, value);
+}
+
+static void usb_switch_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+ int switch_to)
+{
+ gpiod_set_value_cansleep(hisi_hikey_usb->otg_switch, switch_to);
+}
+
+static void usb_typec_power_ctrl(struct hisi_hikey_usb *hisi_hikey_usb,
+ int value)
+{
+ gpiod_set_value_cansleep(hisi_hikey_usb->typec_vbus, value);
+}
+
+static int hisi_hikey_role_switch(struct notifier_block *nb,
+ unsigned long state, void *data)
+{
+ struct hisi_hikey_usb *hisi_hikey_usb;
+
+ hisi_hikey_usb = container_of(nb, struct hisi_hikey_usb, nb);
+
+ switch (state) {
+ case USB_ROLE_NONE:
+ usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
+ usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_HUB);
+ hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_ON);
+ break;
+ case USB_ROLE_HOST:
+ usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+ usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_ON);
+ break;
+ case USB_ROLE_DEVICE:
+ hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF);
+ usb_typec_power_ctrl(hisi_hikey_usb, TYPEC_VBUS_POWER_OFF);
+ usb_switch_ctrl(hisi_hikey_usb, USB_SWITCH_TO_TYPEC);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int hisi_hikey_usb_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct hisi_hikey_usb *hisi_hikey_usb;
+ int ret;
+
+ hisi_hikey_usb = devm_kzalloc(dev, sizeof(*hisi_hikey_usb), GFP_KERNEL);
+ if (!hisi_hikey_usb)
+ return -ENOMEM;
+
+ hisi_hikey_usb->nb.notifier_call = hisi_hikey_role_switch;
+
+ hisi_hikey_usb->typec_vbus = devm_gpiod_get(dev, "typec-vbus",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(hisi_hikey_usb->typec_vbus))
+ return PTR_ERR(hisi_hikey_usb->typec_vbus);
+
+ hisi_hikey_usb->otg_switch = devm_gpiod_get(dev, "otg-switch",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(hisi_hikey_usb->otg_switch))
+ return PTR_ERR(hisi_hikey_usb->otg_switch);
+
+ /* hub-vdd33-en is optional */
+ hisi_hikey_usb->hub_vbus = devm_gpiod_get_optional(dev, "hub-vdd33-en",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(hisi_hikey_usb->hub_vbus))
+ return PTR_ERR(hisi_hikey_usb->hub_vbus);
+
+ hisi_hikey_usb->role_sw = usb_role_switch_get(dev);
+ if (!hisi_hikey_usb->role_sw)
+ return -EPROBE_DEFER;
+ if (IS_ERR(hisi_hikey_usb->role_sw))
+ return PTR_ERR(hisi_hikey_usb->role_sw);
+
+ ret = usb_role_switch_register_notifier(hisi_hikey_usb->role_sw,
+ &hisi_hikey_usb->nb);
+ if (ret) {
+ usb_role_switch_put(hisi_hikey_usb->role_sw);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, hisi_hikey_usb);
+
+ return 0;
+}
+
+static int hisi_hikey_usb_remove(struct platform_device *pdev)
+{
+ struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev);
+
+ usb_role_switch_unregister_notifier(hisi_hikey_usb->role_sw,
+ &hisi_hikey_usb->nb);
+
+ usb_role_switch_put(hisi_hikey_usb->role_sw);
+
+ return 0;
+}
+
+static const struct of_device_id id_table_hisi_hikey_usb[] = {
+ {.compatible = "hisilicon,gpio_hubv1"},
+ {.compatible = "hisilicon,hikey960_usb"},
+ {}
+};
+
+static struct platform_driver hisi_hikey_usb_driver = {
+ .probe = hisi_hikey_usb_probe,
+ .remove = hisi_hikey_usb_remove,
+ .driver = {
+ .name = DEVICE_DRIVER_NAME,
+ .of_match_table = id_table_hisi_hikey_usb,
+ },
+};
+
+module_platform_driver(hisi_hikey_usb_driver);
+
+MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
+MODULE_DESCRIPTION("Driver Support for USB functionality of Hikey");
+MODULE_LICENSE("GPL v2");
--
2.15.0-rc2
next prev parent reply other threads:[~2019-04-20 6:40 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-20 6:40 [PATCH v6 00/13] Add support for usb on Hikey960 Yu Chen
2019-04-20 6:40 ` [PATCH v6 01/13] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY Yu Chen
2019-04-20 6:40 ` [PATCH v6 02/13] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960 Yu Chen
2019-04-25 21:35 ` Rob Herring
2019-04-30 6:07 ` Chen Yu
2019-05-01 16:27 ` Rob Herring
2019-04-20 6:40 ` [PATCH v6 03/13] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform Yu Chen
2019-04-25 21:36 ` Rob Herring
2019-04-20 6:40 ` [PATCH v6 04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc Yu Chen
2020-09-07 13:06 ` Mauro Carvalho Chehab
2020-09-07 14:04 ` Felipe Balbi
2020-09-07 14:50 ` Mauro Carvalho Chehab
2020-09-08 6:09 ` Felipe Balbi
2020-09-08 6:49 ` Mauro Carvalho Chehab
2020-09-08 17:40 ` Thinh Nguyen
2020-09-08 6:42 ` Mauro Carvalho Chehab
2019-04-20 6:40 ` [PATCH v6 05/13] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe " Yu Chen
2019-04-20 6:40 ` [PATCH v6 06/13] usb: dwc3: Increase timeout for CmdAct cleared by device controller Yu Chen
2019-04-20 6:40 ` [PATCH v6 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon Yu Chen
2019-04-20 6:40 ` [PATCH v6 08/13] usb: roles: Introduce stubs for the exiting functions in role.h Yu Chen
2019-04-20 6:40 ` [PATCH v6 09/13] usb: roles: Add usb role switch notifier Yu Chen
2019-04-20 6:40 ` [PATCH v6 10/13] usb: dwc3: Registering a role switch in the DRD code Yu Chen
2019-04-20 6:40 ` Yu Chen [this message]
2019-04-20 6:40 ` [PATCH v6 12/13] usb: gadget: Add configfs attribuite for controling match_existing_only Yu Chen
2019-04-20 6:40 ` [PATCH v6 13/13] dts: hi3660: Add support for usb on Hikey960 Yu Chen
2019-04-25 22:00 ` Rob Herring
2019-04-30 7:15 ` Chen Yu
2019-05-02 5:44 ` shufan_lee(李書帆)
2019-04-29 15:42 ` [PATCH v6 00/13] " Valentin Schneider
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190420064019.57522-12-chenyu56@huawei.com \
--to=chenyu56@huawei.com \
--cc=andy.shevchenko@gmail.com \
--cc=arnd@arndb.de \
--cc=butao@hisilicon.com \
--cc=chenyao11@huawei.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=fangshengzhou@hisilicon.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=john.stultz@linaro.org \
--cc=kongfei@hisilicon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=lipengcheng8@huawei.com \
--cc=liuyu712@hisilicon.com \
--cc=songxiaowei@hisilicon.com \
--cc=suzhuangluan@hisilicon.com \
--cc=wangbinghui@hisilicon.com \
--cc=wanghu17@hisilicon.com \
--cc=xuyiping@hisilicon.com \
--cc=xuyoujun4@huawei.com \
--cc=yudongbin@hisilicon.com \
--cc=zangleigang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).