From: Yu Chen <chenyu56@huawei.com>
To: <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <john.stultz@linaro.org>, <suzhuangluan@hisilicon.com>,
<kongfei@hisilicon.com>, <liuyu712@hisilicon.com>,
<wanghu17@hisilicon.com>, <butao@hisilicon.com>,
<chenyao11@huawei.com>, <fangshengzhou@hisilicon.com>,
<lipengcheng8@huawei.com>, <songxiaowei@hisilicon.com>,
<xuyiping@hisilicon.com>, <xuyoujun4@huawei.com>,
<yudongbin@hisilicon.com>, <zangleigang@hisilicon.com>,
Yu Chen <chenyu56@huawei.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Wei Xu <xuwei5@hisilicon.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
<linux-arm-kernel@lists.infradead.org>,
Binghui Wang <wangbinghui@hisilicon.com>
Subject: [PATCH v6 13/13] dts: hi3660: Add support for usb on Hikey960
Date: Sat, 20 Apr 2019 14:40:19 +0800 [thread overview]
Message-ID: <20190420064019.57522-14-chenyu56@huawei.com> (raw)
In-Reply-To: <20190420064019.57522-1-chenyu56@huawei.com>
This patch adds support for usb on Hikey960.
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
---
v2:
* Remove device_type property.
* Add property "usb-role-switch".
v3:
* Make node "usb_phy" a subnode of usb3_otg_bc register.
* Remove property "typec-vbus-enable-val" of hisi_hikey_usb.
v4:
* Remove property "hisilicon,usb3-otg-bc-syscon" of usb-phy.
---
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 53 ++++++++++++++++
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 73 +++++++++++++++++++++++
2 files changed, 126 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index e035cf195b19..d4e11c56b250 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -13,6 +13,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
/ {
model = "HiKey960";
@@ -196,6 +197,26 @@
method = "smc";
};
};
+
+ hisi_hikey_usb: hisi_hikey_usb {
+ compatible = "hisilicon,hikey960_usb";
+ typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+ otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+ hub-vdd33-en-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbhub5734_pmx_func>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hikey_usb_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dwc3_role_switch_notify>;
+ };
+ };
+ };
+
};
/*
@@ -526,6 +547,38 @@
&i2c1 {
status = "okay";
+ rt1711h: rt1711h@4e {
+ compatible = "richtek,rt1711h";
+ reg = <0x4e>;
+ status = "ok";
+ interrupt-parent = <&gpio27>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_cfg_func>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 5000, 1000)>;
+ op-sink-microwatt = <10000000>;
+ };
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rt1711h_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dwc3_role_switch>;
+ };
+ };
+ };
+
adv7533: adv7533@39 {
status = "ok";
compatible = "adi,adv7533";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 2f19e0e5b7cf..173467505ada 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -355,6 +355,12 @@
#clock-cells = <1>;
};
+ pmctrl: pmctrl@fff31000 {
+ compatible = "hisilicon,hi3660-pmctrl", "syscon";
+ reg = <0x0 0xfff31000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
pmuctrl: crg_ctrl@fff34000 {
compatible = "hisilicon,hi3660-pmuctrl", "syscon";
reg = <0x0 0xfff34000 0x0 0x1000>;
@@ -1134,5 +1140,72 @@
};
};
};
+
+ usb3_otg_bc: usb3_otg_bc@ff200000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+
+ usb_phy: usb-phy {
+ compatible = "hisilicon,hi3660-usb-phy";
+ #phy-cells = <0>;
+ hisilicon,pericrg-syscon = <&crg_ctrl>;
+ hisilicon,pctrl-syscon = <&pctrl>;
+ hisilicon,eye-diagram-param = <0x22466e4>;
+ };
+ };
+
+ usb3: hisi_dwc3 {
+ compatible = "hisilicon,hi3660-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+ <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+
+ assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ assigned-clock-rates = <229000000>;
+ resets = <&crg_rst 0x90 8>,
+ <&crg_rst 0x90 7>,
+ <&crg_rst 0x90 6>,
+ <&crg_rst 0x90 5>;
+
+ dwc3: dwc3@ff100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff100000 0x0 0x100000>;
+ interrupts = <0 159 4>, <0 161 4>;
+ phys = <&usb_phy>;
+ phy-names = "usb3-phy";
+ dr_mode = "otg";
+ maximum-speed = "super-speed";
+ phy_type = "utmi";
+ snps,dis-del-phy-power-chg-quirk;
+ snps,lfps_filter_quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,tx_de_emphasis_quirk;
+ snps,tx_de_emphasis = <1>;
+ snps,dis_enblslpm_quirk;
+ snps,gctl-reset-quirk;
+ usb-role-switch;
+ role-switch-default-host;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dwc3_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&rt1711h_ep>;
+ };
+
+ dwc3_role_switch_notify: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hikey_usb_ep>;
+ };
+ };
+ };
+ };
};
};
--
2.15.0-rc2
next prev parent reply other threads:[~2019-04-20 6:40 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-20 6:40 [PATCH v6 00/13] Add support for usb on Hikey960 Yu Chen
2019-04-20 6:40 ` [PATCH v6 01/13] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY Yu Chen
2019-04-20 6:40 ` [PATCH v6 02/13] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960 Yu Chen
2019-04-25 21:35 ` Rob Herring
2019-04-30 6:07 ` Chen Yu
2019-05-01 16:27 ` Rob Herring
2019-04-20 6:40 ` [PATCH v6 03/13] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform Yu Chen
2019-04-25 21:36 ` Rob Herring
2019-04-20 6:40 ` [PATCH v6 04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc Yu Chen
2020-09-07 13:06 ` Mauro Carvalho Chehab
2020-09-07 14:04 ` Felipe Balbi
2020-09-07 14:50 ` Mauro Carvalho Chehab
2020-09-08 6:09 ` Felipe Balbi
2020-09-08 6:49 ` Mauro Carvalho Chehab
2020-09-08 17:40 ` Thinh Nguyen
2020-09-08 6:42 ` Mauro Carvalho Chehab
2019-04-20 6:40 ` [PATCH v6 05/13] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe " Yu Chen
2019-04-20 6:40 ` [PATCH v6 06/13] usb: dwc3: Increase timeout for CmdAct cleared by device controller Yu Chen
2019-04-20 6:40 ` [PATCH v6 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon Yu Chen
2019-04-20 6:40 ` [PATCH v6 08/13] usb: roles: Introduce stubs for the exiting functions in role.h Yu Chen
2019-04-20 6:40 ` [PATCH v6 09/13] usb: roles: Add usb role switch notifier Yu Chen
2019-04-20 6:40 ` [PATCH v6 10/13] usb: dwc3: Registering a role switch in the DRD code Yu Chen
2019-04-20 6:40 ` [PATCH v6 11/13] hikey960: Support usb functionality of Hikey960 Yu Chen
2019-04-20 6:40 ` [PATCH v6 12/13] usb: gadget: Add configfs attribuite for controling match_existing_only Yu Chen
2019-04-20 6:40 ` Yu Chen [this message]
2019-04-25 22:00 ` [PATCH v6 13/13] dts: hi3660: Add support for usb on Hikey960 Rob Herring
2019-04-30 7:15 ` Chen Yu
2019-05-02 5:44 ` shufan_lee(李書帆)
2019-04-29 15:42 ` [PATCH v6 00/13] " Valentin Schneider
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190420064019.57522-14-chenyu56@huawei.com \
--to=chenyu56@huawei.com \
--cc=butao@hisilicon.com \
--cc=chenyao11@huawei.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=fangshengzhou@hisilicon.com \
--cc=john.stultz@linaro.org \
--cc=kongfei@hisilicon.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=lipengcheng8@huawei.com \
--cc=liuyu712@hisilicon.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=songxiaowei@hisilicon.com \
--cc=suzhuangluan@hisilicon.com \
--cc=wangbinghui@hisilicon.com \
--cc=wanghu17@hisilicon.com \
--cc=xuwei5@hisilicon.com \
--cc=xuyiping@hisilicon.com \
--cc=xuyoujun4@huawei.com \
--cc=yudongbin@hisilicon.com \
--cc=zangleigang@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).