linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Felipe Balbi <balbi@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>
Cc: Yu Chen <chenyu56@huawei.com>, <linux-usb@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<john.stultz@linaro.org>, <suzhuangluan@hisilicon.com>,
	<kongfei@hisilicon.com>, <liuyu712@hisilicon.com>,
	<wanghu17@hisilicon.com>, <butao@hisilicon.com>,
	<chenyao11@huawei.com>, <fangshengzhou@hisilicon.com>,
	<lipengcheng8@huawei.com>, <songxiaowei@hisilicon.com>,
	<xuyiping@hisilicon.com>, <xuyoujun4@huawei.com>,
	<yudongbin@hisilicon.com>, <zangleigang@hisilicon.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Binghui Wang <wangbinghui@hisilicon.com>
Subject: Re: [PATCH v6 04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc
Date: Mon, 7 Sep 2020 15:06:31 +0200	[thread overview]
Message-ID: <20200907150631.70e1bce0@coco.lan> (raw)
In-Reply-To: <20190420064019.57522-5-chenyu56@huawei.com>

Hi Felipe/Greg,

What's the status of this patch? 

I tested here, together with the Hikey 970 phy RFC patches I sent
last week.

Without this patch, the USB HID driver receives -EPROTO from
submitted URBs, causing it to enter into an endless reset cycle
on every 500 ms, at the hid_io_error() logic.

Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

If you prefer, I can re-submit this one with my SOB.

Thanks,
Mauro

Em Sat, 20 Apr 2019 14:40:10 +0800
Yu Chen <chenyu56@huawei.com> escreveu:

> SPLIT_BOUNDARY_DISABLE should be set for DesignWare USB3 DRD Core
> of Hisilicon Kirin Soc when dwc3 core act as host.
> 
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Felipe Balbi <balbi@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> ---
> v4:
> * Add dwc3_complete definition while CONFIG_PM_SLEEP does not defined.
> * Add description for 'dis_split_quirk'.
> ---
> ---
>  drivers/usb/dwc3/core.c | 26 ++++++++++++++++++++++++++
>  drivers/usb/dwc3/core.h |  7 +++++++
>  2 files changed, 33 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index a1b126f90261..c3ef6bd2b0d4 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -117,6 +117,7 @@ static void __dwc3_set_mode(struct work_struct *work)
>  	struct dwc3 *dwc = work_to_dwc(work);
>  	unsigned long flags;
>  	int ret;
> +	u32 reg;
>  
>  	if (dwc->dr_mode != USB_DR_MODE_OTG)
>  		return;
> @@ -169,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work)
>  			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
>  			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
>  			phy_calibrate(dwc->usb2_generic_phy);
> +			if (dwc->dis_split_quirk) {
> +				reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
> +				reg |= DWC3_GUCTL3_SPLITDISABLE;
> +				dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
> +			}
>  		}
>  		break;
>  	case DWC3_GCTL_PRTCAP_DEVICE:
> @@ -1306,6 +1312,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>  	dwc->dis_metastability_quirk = device_property_read_bool(dev,
>  				"snps,dis_metastability_quirk");
>  
> +	dwc->dis_split_quirk = device_property_read_bool(dev,
> +				"snps,dis-split-quirk");
> +
>  	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
>  	dwc->tx_de_emphasis = tx_de_emphasis;
>  
> @@ -1825,10 +1834,27 @@ static int dwc3_resume(struct device *dev)
>  
>  	return 0;
>  }
> +
> +static void dwc3_complete(struct device *dev)
> +{
> +	struct dwc3	*dwc = dev_get_drvdata(dev);
> +	u32		reg;
> +
> +	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
> +			dwc->dis_split_quirk) {
> +		dev_dbg(dwc->dev, "set DWC3_GUCTL3_SPLITDISABLE\n");
> +		reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
> +		reg |= DWC3_GUCTL3_SPLITDISABLE;
> +		dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
> +	}
> +}
> +#else
> +#define dwc3_complete NULL
>  #endif /* CONFIG_PM_SLEEP */
>  
>  static const struct dev_pm_ops dwc3_dev_pm_ops = {
>  	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
> +	.complete = dwc3_complete,
>  	SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
>  			dwc3_runtime_idle)
>  };
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 1528d395b156..28475e301ad9 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -136,6 +136,7 @@
>  #define DWC3_GEVNTCOUNT(n)	(0xc40c + ((n) * 0x10))
>  
>  #define DWC3_GHWPARAMS8		0xc600
> +#define DWC3_GUCTL3		0xc60c
>  #define DWC3_GFLADJ		0xc630
>  
>  /* Device Registers */
> @@ -370,6 +371,9 @@
>  /* Global User Control Register 2 */
>  #define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
>  
> +/* Global User Control Register 3 */
> +#define DWC3_GUCTL3_SPLITDISABLE		BIT(14)
> +
>  /* Device Configuration Register */
>  #define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
>  #define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
> @@ -1030,6 +1034,7 @@ struct dwc3_scratchpad_array {
>   * 	2	- No de-emphasis
>   * 	3	- Reserved
>   * @dis_metastability_quirk: set to disable metastability quirk.
> + * @dis_split_quirk: set to disable split boundary.
>   * @imod_interval: set the interrupt moderation interval in 250ns
>   *                 increments or 0 to disable.
>   */
> @@ -1216,6 +1221,8 @@ struct dwc3 {
>  
>  	unsigned		dis_metastability_quirk:1;
>  
> +	unsigned		dis_split_quirk:1;
> +
>  	u16			imod_interval;
>  };
>  



Thanks,
Mauro

  reply	other threads:[~2020-09-07 13:11 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-20  6:40 [PATCH v6 00/13] Add support for usb on Hikey960 Yu Chen
2019-04-20  6:40 ` [PATCH v6 01/13] dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY Yu Chen
2019-04-20  6:40 ` [PATCH v6 02/13] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960 Yu Chen
2019-04-25 21:35   ` Rob Herring
2019-04-30  6:07     ` Chen Yu
2019-05-01 16:27       ` Rob Herring
2019-04-20  6:40 ` [PATCH v6 03/13] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform Yu Chen
2019-04-25 21:36   ` Rob Herring
2019-04-20  6:40 ` [PATCH v6 04/13] usb: dwc3: Add splitdisable quirk for Hisilicon Kirin Soc Yu Chen
2020-09-07 13:06   ` Mauro Carvalho Chehab [this message]
2020-09-07 14:04     ` Felipe Balbi
2020-09-07 14:50       ` Mauro Carvalho Chehab
2020-09-08  6:09         ` Felipe Balbi
2020-09-08  6:49           ` Mauro Carvalho Chehab
2020-09-08 17:40           ` Thinh Nguyen
2020-09-08  6:42       ` Mauro Carvalho Chehab
2019-04-20  6:40 ` [PATCH v6 05/13] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe " Yu Chen
2019-04-20  6:40 ` [PATCH v6 06/13] usb: dwc3: Increase timeout for CmdAct cleared by device controller Yu Chen
2019-04-20  6:40 ` [PATCH v6 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon Yu Chen
2019-04-20  6:40 ` [PATCH v6 08/13] usb: roles: Introduce stubs for the exiting functions in role.h Yu Chen
2019-04-20  6:40 ` [PATCH v6 09/13] usb: roles: Add usb role switch notifier Yu Chen
2019-04-20  6:40 ` [PATCH v6 10/13] usb: dwc3: Registering a role switch in the DRD code Yu Chen
2019-04-20  6:40 ` [PATCH v6 11/13] hikey960: Support usb functionality of Hikey960 Yu Chen
2019-04-20  6:40 ` [PATCH v6 12/13] usb: gadget: Add configfs attribuite for controling match_existing_only Yu Chen
2019-04-20  6:40 ` [PATCH v6 13/13] dts: hi3660: Add support for usb on Hikey960 Yu Chen
2019-04-25 22:00   ` Rob Herring
2019-04-30  7:15     ` Chen Yu
2019-05-02  5:44       ` shufan_lee(李書帆)
2019-04-29 15:42 ` [PATCH v6 00/13] " Valentin Schneider

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200907150631.70e1bce0@coco.lan \
    --to=mchehab+huawei@kernel.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=balbi@kernel.org \
    --cc=butao@hisilicon.com \
    --cc=chenyao11@huawei.com \
    --cc=chenyu56@huawei.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fangshengzhou@hisilicon.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=john.stultz@linaro.org \
    --cc=kongfei@hisilicon.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=lipengcheng8@huawei.com \
    --cc=liuyu712@hisilicon.com \
    --cc=songxiaowei@hisilicon.com \
    --cc=suzhuangluan@hisilicon.com \
    --cc=wangbinghui@hisilicon.com \
    --cc=wanghu17@hisilicon.com \
    --cc=xuyiping@hisilicon.com \
    --cc=xuyoujun4@huawei.com \
    --cc=yudongbin@hisilicon.com \
    --cc=zangleigang@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).