linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink
@ 2019-07-31 15:42 Hubert Feurstein
  2019-08-04 15:04 ` Andrew Lunn
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Hubert Feurstein @ 2019-07-31 15:42 UTC (permalink / raw)
  To: netdev, linux-kernel
  Cc: Hubert Feurstein, Andrew Lunn, Vivien Didelot, Florian Fainelli,
	David S. Miller

We have to drop the adjust_link callback in order to finally migrate to
phylink.

Otherwise we get the following warning during startup:
  "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please
   migrate to PHYLINK!"

The warning is generated in the function dsa_port_link_register_of in
dsa/port.c:

  int dsa_port_link_register_of(struct dsa_port *dp)
  {
  	struct dsa_switch *ds = dp->ds;

  	if (!ds->ops->adjust_link)
  		return dsa_port_phylink_register(dp);

  	dev_warn(ds->dev,
  		 "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
  	[...]
  }

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 366f70bfe055..37e8babd035f 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -27,7 +27,6 @@
 #include <linux/platform_data/mv88e6xxx.h>
 #include <linux/netdevice.h>
 #include <linux/gpio/consumer.h>
-#include <linux/phy.h>
 #include <linux/phylink.h>
 #include <net/dsa.h>
 
@@ -482,30 +481,6 @@ static int mv88e6xxx_phy_is_internal(struct dsa_switch *ds, int port)
 	return port < chip->info->num_internal_phys;
 }
 
-/* We expect the switch to perform auto negotiation if there is a real
- * phy. However, in the case of a fixed link phy, we force the port
- * settings from the fixed link settings.
- */
-static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
-				  struct phy_device *phydev)
-{
-	struct mv88e6xxx_chip *chip = ds->priv;
-	int err;
-
-	if (!phy_is_pseudo_fixed_link(phydev) &&
-	    mv88e6xxx_phy_is_internal(ds, port))
-		return;
-
-	mv88e6xxx_reg_lock(chip);
-	err = mv88e6xxx_port_setup_mac(chip, port, phydev->link, phydev->speed,
-				       phydev->duplex, phydev->pause,
-				       phydev->interface);
-	mv88e6xxx_reg_unlock(chip);
-
-	if (err && err != -EOPNOTSUPP)
-		dev_err(ds->dev, "p%d: failed to configure MAC\n", port);
-}
-
 static void mv88e6065_phylink_validate(struct mv88e6xxx_chip *chip, int port,
 				       unsigned long *mask,
 				       struct phylink_link_state *state)
@@ -4755,7 +4730,6 @@ static int mv88e6xxx_port_egress_floods(struct dsa_switch *ds, int port,
 static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
 	.get_tag_protocol	= mv88e6xxx_get_tag_protocol,
 	.setup			= mv88e6xxx_setup,
-	.adjust_link		= mv88e6xxx_adjust_link,
 	.phylink_validate	= mv88e6xxx_validate,
 	.phylink_mac_link_state	= mv88e6xxx_link_state,
 	.phylink_mac_config	= mv88e6xxx_mac_config,
-- 
2.22.0


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink
  2019-07-31 15:42 [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink Hubert Feurstein
@ 2019-08-04 15:04 ` Andrew Lunn
  2019-08-04 15:10 ` Andrew Lunn
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 7+ messages in thread
From: Andrew Lunn @ 2019-08-04 15:04 UTC (permalink / raw)
  To: Hubert Feurstein
  Cc: netdev, linux-kernel, Vivien Didelot, Florian Fainelli, David S. Miller

On Wed, Jul 31, 2019 at 05:42:39PM +0200, Hubert Feurstein wrote:
> We have to drop the adjust_link callback in order to finally migrate to
> phylink.
> 
> Otherwise we get the following warning during startup:
>   "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please
>    migrate to PHYLINK!"
> 
> The warning is generated in the function dsa_port_link_register_of in
> dsa/port.c:
> 
>   int dsa_port_link_register_of(struct dsa_port *dp)
>   {
>   	struct dsa_switch *ds = dp->ds;
> 
>   	if (!ds->ops->adjust_link)
>   		return dsa_port_phylink_register(dp);
> 
>   	dev_warn(ds->dev,
>   		 "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
>   	[...]
>   }
> 
> Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink
  2019-07-31 15:42 [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink Hubert Feurstein
  2019-08-04 15:04 ` Andrew Lunn
@ 2019-08-04 15:10 ` Andrew Lunn
  2019-08-05  8:49   ` Hubert Feurstein
  2019-08-04 19:37 ` Vladimir Oltean
  2019-08-05 17:56 ` David Miller
  3 siblings, 1 reply; 7+ messages in thread
From: Andrew Lunn @ 2019-08-04 15:10 UTC (permalink / raw)
  To: Hubert Feurstein
  Cc: netdev, linux-kernel, Vivien Didelot, Florian Fainelli, David S. Miller

On Wed, Jul 31, 2019 at 05:42:39PM +0200, Hubert Feurstein wrote:
> We have to drop the adjust_link callback in order to finally migrate to
> phylink.
> 
> Otherwise we get the following warning during startup:
>   "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please
>    migrate to PHYLINK!"

Hi Hubert

Do we need the same patch for the b53 driver?

   Andrew

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink
  2019-07-31 15:42 [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink Hubert Feurstein
  2019-08-04 15:04 ` Andrew Lunn
  2019-08-04 15:10 ` Andrew Lunn
@ 2019-08-04 19:37 ` Vladimir Oltean
  2019-08-05 17:56 ` David Miller
  3 siblings, 0 replies; 7+ messages in thread
From: Vladimir Oltean @ 2019-08-04 19:37 UTC (permalink / raw)
  To: Hubert Feurstein
  Cc: netdev, lkml, Andrew Lunn, Vivien Didelot, Florian Fainelli,
	David S. Miller, Ioana Ciornei

On Wed, 31 Jul 2019 at 18:43, Hubert Feurstein <h.feurstein@gmail.com> wrote:
>
> We have to drop the adjust_link callback in order to finally migrate to
> phylink.
>
> Otherwise we get the following warning during startup:
>   "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please
>    migrate to PHYLINK!"
>
> The warning is generated in the function dsa_port_link_register_of in
> dsa/port.c:
>
>   int dsa_port_link_register_of(struct dsa_port *dp)
>   {
>         struct dsa_switch *ds = dp->ds;
>
>         if (!ds->ops->adjust_link)
>                 return dsa_port_phylink_register(dp);
>
>         dev_warn(ds->dev,
>                  "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
>         [...]
>   }
>
> Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>

>  drivers/net/dsa/mv88e6xxx/chip.c | 26 --------------------------
>  1 file changed, 26 deletions(-)
>
> diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
> index 366f70bfe055..37e8babd035f 100644
> --- a/drivers/net/dsa/mv88e6xxx/chip.c
> +++ b/drivers/net/dsa/mv88e6xxx/chip.c
> @@ -27,7 +27,6 @@
>  #include <linux/platform_data/mv88e6xxx.h>
>  #include <linux/netdevice.h>
>  #include <linux/gpio/consumer.h>
> -#include <linux/phy.h>
>  #include <linux/phylink.h>
>  #include <net/dsa.h>
>
> @@ -482,30 +481,6 @@ static int mv88e6xxx_phy_is_internal(struct dsa_switch *ds, int port)
>         return port < chip->info->num_internal_phys;
>  }
>
> -/* We expect the switch to perform auto negotiation if there is a real
> - * phy. However, in the case of a fixed link phy, we force the port
> - * settings from the fixed link settings.
> - */
> -static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
> -                                 struct phy_device *phydev)
> -{
> -       struct mv88e6xxx_chip *chip = ds->priv;
> -       int err;
> -
> -       if (!phy_is_pseudo_fixed_link(phydev) &&
> -           mv88e6xxx_phy_is_internal(ds, port))
> -               return;
> -
> -       mv88e6xxx_reg_lock(chip);
> -       err = mv88e6xxx_port_setup_mac(chip, port, phydev->link, phydev->speed,
> -                                      phydev->duplex, phydev->pause,
> -                                      phydev->interface);
> -       mv88e6xxx_reg_unlock(chip);
> -
> -       if (err && err != -EOPNOTSUPP)
> -               dev_err(ds->dev, "p%d: failed to configure MAC\n", port);
> -}
> -
>  static void mv88e6065_phylink_validate(struct mv88e6xxx_chip *chip, int port,
>                                        unsigned long *mask,
>                                        struct phylink_link_state *state)
> @@ -4755,7 +4730,6 @@ static int mv88e6xxx_port_egress_floods(struct dsa_switch *ds, int port,
>  static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
>         .get_tag_protocol       = mv88e6xxx_get_tag_protocol,
>         .setup                  = mv88e6xxx_setup,
> -       .adjust_link            = mv88e6xxx_adjust_link,
>         .phylink_validate       = mv88e6xxx_validate,
>         .phylink_mac_link_state = mv88e6xxx_link_state,
>         .phylink_mac_config     = mv88e6xxx_mac_config,
> --
> 2.22.0
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink
  2019-08-04 15:10 ` Andrew Lunn
@ 2019-08-05  8:49   ` Hubert Feurstein
  2019-08-13 19:50     ` Florian Fainelli
  0 siblings, 1 reply; 7+ messages in thread
From: Hubert Feurstein @ 2019-08-05  8:49 UTC (permalink / raw)
  To: Andrew Lunn
  Cc: netdev, linux-kernel, Vivien Didelot, Florian Fainelli, David S. Miller

Hi Andrew,

It looks like some work is still needed in b53_phylink_mac_config to
take over the
functionality of the current adjust_link implementation.

Hubert

Am So., 4. Aug. 2019 um 17:10 Uhr schrieb Andrew Lunn <andrew@lunn.ch>:
>
> On Wed, Jul 31, 2019 at 05:42:39PM +0200, Hubert Feurstein wrote:
> > We have to drop the adjust_link callback in order to finally migrate to
> > phylink.
> >
> > Otherwise we get the following warning during startup:
> >   "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please
> >    migrate to PHYLINK!"
>
> Hi Hubert
>
> Do we need the same patch for the b53 driver?
>
>    Andrew

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink
  2019-07-31 15:42 [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink Hubert Feurstein
                   ` (2 preceding siblings ...)
  2019-08-04 19:37 ` Vladimir Oltean
@ 2019-08-05 17:56 ` David Miller
  3 siblings, 0 replies; 7+ messages in thread
From: David Miller @ 2019-08-05 17:56 UTC (permalink / raw)
  To: h.feurstein; +Cc: netdev, linux-kernel, andrew, vivien.didelot, f.fainelli

From: Hubert Feurstein <h.feurstein@gmail.com>
Date: Wed, 31 Jul 2019 17:42:39 +0200

> We have to drop the adjust_link callback in order to finally migrate to
> phylink.
> 
> Otherwise we get the following warning during startup:
>   "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please
>    migrate to PHYLINK!"
> 
> The warning is generated in the function dsa_port_link_register_of in
> dsa/port.c:
> 
>   int dsa_port_link_register_of(struct dsa_port *dp)
>   {
>   	struct dsa_switch *ds = dp->ds;
> 
>   	if (!ds->ops->adjust_link)
>   		return dsa_port_phylink_register(dp);
> 
>   	dev_warn(ds->dev,
>   		 "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
>   	[...]
>   }
> 
> Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>

Applied.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink
  2019-08-05  8:49   ` Hubert Feurstein
@ 2019-08-13 19:50     ` Florian Fainelli
  0 siblings, 0 replies; 7+ messages in thread
From: Florian Fainelli @ 2019-08-13 19:50 UTC (permalink / raw)
  To: Hubert Feurstein, Andrew Lunn
  Cc: netdev, linux-kernel, Vivien Didelot, David S. Miller

On 8/5/19 1:49 AM, Hubert Feurstein wrote:
> Hi Andrew,
> 
> It looks like some work is still needed in b53_phylink_mac_config to
> take over the
> functionality of the current adjust_link implementation.

Indeed, I will look into it in the next few weeks.
-- 
Florian

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2019-08-13 19:50 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-31 15:42 [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink Hubert Feurstein
2019-08-04 15:04 ` Andrew Lunn
2019-08-04 15:10 ` Andrew Lunn
2019-08-05  8:49   ` Hubert Feurstein
2019-08-13 19:50     ` Florian Fainelli
2019-08-04 19:37 ` Vladimir Oltean
2019-08-05 17:56 ` David Miller

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).