[PATCH 4.9 00/47] 4.9.196-stable review

[PATCH 4.9 00/47] 4.9.196-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.196 release.
There are 47 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Tue 08 Oct 2019 05:19:59 PM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.196-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.196-rc1

Andrey Konovalov <andreyknvl@google.com>
    NFC: fix attrs checks in netlink interface

Eric Biggers <ebiggers@google.com>
    smack: use GFP_NOFS while holding inode_smack::smk_lock

Jann Horn <jannh@google.com>
    Smack: Don't ignore other bprm->unsafe flags if LSM_UNSAFE_PTRACE is set

David Ahern <dsahern@gmail.com>
    ipv6: Handle missing host route in __ipv6_ifa_notify

Eric Dumazet <edumazet@google.com>
    sch_cbq: validate TCA_CBQ_WRROPT to avoid crash

Dongli Zhang <dongli.zhang@oracle.com>
    xen-netfront: do not use ~0U as error return value for xennet_fill_frags()

Dotan Barak <dotanb@dev.mellanox.co.il>
    net/rds: Fix error handling in rds_ib_add_one()

Eric Dumazet <edumazet@google.com>
    sch_dsmark: fix potential NULL deref in dsmark_init()

Reinhard Speyerer <rspmn@arcor.de>
    qmi_wwan: add support for Cinterion CLS8 devices

Eric Dumazet <edumazet@google.com>
    nfc: fix memory leak in llcp_sock_bind()

Martin KaFai Lau <kafai@fb.com>
    net: Unpublish sk from sk_reuseport_cb before call_rcu

Navid Emamdoost <navid.emamdoost@gmail.com>
    net: qlogic: Fix memory leak in ql_alloc_large_buffers

Paolo Abeni <pabeni@redhat.com>
    net: ipv4: avoid mixed n_redirects and rate_tokens usage

Eric Dumazet <edumazet@google.com>
    ipv6: drop incoming packets having a v4mapped source address

Johan Hovold <johan@kernel.org>
    hso: fix NULL-deref on tty open

Vishal Kulkarni <vishal@chelsio.com>
    cxgb4:Fix out-of-bounds MSI-X info array access

Martijn Coenen <maco@android.com>
    ANDROID: binder: synchronize_rcu() when using POLLFREE.

Martijn Coenen <maco@android.com>
    ANDROID: binder: remove waitqueue when thread exits.

Nicolas Boichat <drinkcat@chromium.org>
    kmemleak: increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE default to 16K

Changwei Ge <gechangwei@live.cn>
    ocfs2: wait for recovering done after direct unlock request

David Howells <dhowells@redhat.com>
    hypfs: Fix error number left in struct pointer member

OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
    fat: work around race with userspace's read via blockdev while mounting

Mike Rapoport <mike.rapoport@gmail.com>
    ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address

Jia-Ju Bai <baijiaju1990@gmail.com>
    security: smack: Fix possible null-pointer dereferences in smack_socket_sock_rcv_skb()

Joao Moreno <mail@joaomoreno.com>
    HID: apple: Fix stuck function keys when using FN

Will Deacon <will@kernel.org>
    ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes

Nishka Dasgupta <nishkadg.linux@gmail.com>
    PCI: tegra: Fix OF node reference leak

Kai-Heng Feng <kai.heng.feng@canonical.com>
    mfd: intel-lpss: Remove D3cold delay

Nathan Chancellor <natechancellor@gmail.com>
    MIPS: tlbex: Explicitly cast _PAGE_NO_EXEC to a boolean

Bart Van Assche <bvanassche@acm.org>
    scsi: core: Reduce memory required for SCSI logging

Eugen Hristev <eugen.hristev@microchip.com>
    clk: at91: select parent if main oscillator or bypass is enabled

Arnd Bergmann <arnd@arndb.de>
    arm64: fix unreachable code issue with cmpxchg

Nathan Lynch <nathanl@linux.ibm.com>
    powerpc/pseries: correctly track irq state in default idle

Nicholas Piggin <npiggin@gmail.com>
    powerpc/64s/exception: machine check use correct cfar for late handler

Jean Delvare <jdelvare@suse.de>
    drm/amdgpu/si: fix ASIC tests

hexin <hexin.op@gmail.com>
    vfio_pci: Restore original state on release

Sowjanya Komatineni <skomatineni@nvidia.com>
    pinctrl: tegra: Fix write barrier placement in pmx_writel

Nathan Lynch <nathanl@linux.ibm.com>
    powerpc/pseries/mobility: use cond_resched when updating device tree

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/futex: Fix warning: 'oldval' may be used uninitialized in this function

Nathan Lynch <nathanl@linux.ibm.com>
    powerpc/rtas: use device model APIs and serialization during LPM

Stephen Boyd <sboyd@kernel.org>
    clk: sirf: Don't reference clk_init_data after registration

Nathan Huckleberry <nhuck@google.com>
    clk: qoriq: Fix -Wunused-const-variable

Corey Minyard <cminyard@mvista.com>
    ipmi_si: Only schedule continuously in the thread in maintenance mode

Jia-Ju Bai <baijiaju1990@gmail.com>
    gpu: drm: radeon: Fix a possible null-pointer dereference in radeon_connector_set_property()

KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>
    drm/radeon: Fix EEH during kexec

Marko Kohtala <marko.kohtala@okoko.fi>
    video: ssd1307fb: Start page range at page_offset

Andrey Smirnov <andrew.smirnov@gmail.com>
    drm/bridge: tc358767: Increase AUX transfer length limit


-------------

Diffstat:

 Makefile                                       |  4 +--
 arch/arm/mm/fault.c                            |  4 +--
 arch/arm/mm/fault.h                            |  1 +
 arch/arm/mm/mmu.c                              | 16 +++++++++
 arch/arm64/include/asm/cmpxchg.h               |  6 ++--
 arch/mips/mm/tlbex.c                           |  2 +-
 arch/powerpc/include/asm/futex.h               |  3 +-
 arch/powerpc/kernel/exceptions-64s.S           |  4 +++
 arch/powerpc/kernel/rtas.c                     | 11 ++++--
 arch/powerpc/platforms/pseries/mobility.c      |  9 +++++
 arch/powerpc/platforms/pseries/setup.c         |  3 ++
 arch/s390/hypfs/inode.c                        |  9 ++---
 drivers/android/binder.c                       | 26 +++++++++++++-
 drivers/char/ipmi/ipmi_si_intf.c               | 24 ++++++++++---
 drivers/clk/at91/clk-main.c                    | 10 ++++--
 drivers/clk/clk-qoriq.c                        |  2 +-
 drivers/clk/sirf/clk-common.c                  | 12 ++++---
 drivers/gpu/drm/amd/amdgpu/si.c                |  6 ++--
 drivers/gpu/drm/bridge/tc358767.c              |  2 +-
 drivers/gpu/drm/radeon/radeon_connectors.c     |  2 +-
 drivers/gpu/drm/radeon/radeon_drv.c            |  8 +++++
 drivers/hid/hid-apple.c                        | 49 +++++++++++++++-----------
 drivers/mfd/intel-lpss-pci.c                   |  2 ++
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c |  9 +++--
 drivers/net/ethernet/qlogic/qla3xxx.c          |  1 +
 drivers/net/usb/hso.c                          | 12 ++++---
 drivers/net/usb/qmi_wwan.c                     |  1 +
 drivers/net/xen-netfront.c                     | 17 ++++-----
 drivers/pci/host/pci-tegra.c                   | 22 ++++++++----
 drivers/pinctrl/tegra/pinctrl-tegra.c          |  4 ++-
 drivers/scsi/scsi_logging.c                    | 48 ++-----------------------
 drivers/vfio/pci/vfio_pci.c                    | 17 ++++++---
 drivers/video/fbdev/ssd1307fb.c                |  2 +-
 fs/fat/dir.c                                   | 13 +++++--
 fs/fat/fatent.c                                |  3 ++
 fs/ocfs2/dlm/dlmunlock.c                       | 23 +++++++++---
 include/scsi/scsi_dbg.h                        |  2 --
 lib/Kconfig.debug                              |  2 +-
 net/core/sock.c                                | 11 ++++--
 net/ipv4/route.c                               |  5 ++-
 net/ipv6/addrconf.c                            | 17 ++++++---
 net/ipv6/ip6_input.c                           | 10 ++++++
 net/nfc/llcp_sock.c                            |  7 +++-
 net/nfc/netlink.c                              |  6 ++--
 net/rds/ib.c                                   |  6 ++--
 net/sched/sch_cbq.c                            | 27 +++++++++++---
 net/sched/sch_dsmark.c                         |  2 ++
 security/smack/smack_access.c                  |  4 +--
 security/smack/smack_lsm.c                     |  7 ++--
 49 files changed, 328 insertions(+), 165 deletions(-)

[PATCH 4.9 01/47] drm/bridge: tc358767: Increase AUX transfer length limit

[Greg Kroah-Hartman]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

[ Upstream commit e0655feaec62d5139b6b13a7b1bbb1ab8f1c2d83 ]

According to the datasheet tc358767 can transfer up to 16 bytes via
its AUX channel, so the artificial limit of 8 appears to be too
low. However only up to 15-bytes seem to be actually supported and
trying to use 16-byte transfers results in transfers failing
sporadically (with bogus status in case of I2C transfers), so limit it
to 15.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619052716.16831-9-andrew.smirnov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358767.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 80993a8734e08..8b6f8fac92e89 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -300,7 +300,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 			       struct drm_dp_aux_msg *msg)
 {
 	struct tc_data *tc = aux_to_tc(aux);
-	size_t size = min_t(size_t, 8, msg->size);
+	size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
 	u8 request = msg->request & ~DP_AUX_I2C_MOT;
 	u8 *buf = msg->buffer;
 	u32 tmp = 0;
-- 
2.20.1

[PATCH 4.9 02/47] video: ssd1307fb: Start page range at page_offset

[Greg Kroah-Hartman]

From: Marko Kohtala <marko.kohtala@okoko.fi>

[ Upstream commit dd9782834dd9dde3624ff1acea8859f3d3e792d4 ]

The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.

Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode")
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/ssd1307fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 2925d5ce8d3e5..1267b93c03bd0 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -430,7 +430,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	ret = ssd1307fb_write_cmd(par->client, par->page_offset);
 	if (ret < 0)
 		return ret;
 
-- 
2.20.1

[PATCH 4.9 03/47] drm/radeon: Fix EEH during kexec

[Greg Kroah-Hartman]

From: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>

[ Upstream commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6 ]

During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.

Signed-off-by: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 30bd4a6a9d466..3ccf5b28b326e 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -366,11 +366,19 @@ radeon_pci_remove(struct pci_dev *pdev)
 static void
 radeon_pci_shutdown(struct pci_dev *pdev)
 {
+	struct drm_device *ddev = pci_get_drvdata(pdev);
+
 	/* if we are running in a VM, make sure the device
 	 * torn down properly on reboot/shutdown
 	 */
 	if (radeon_device_is_virtual())
 		radeon_pci_remove(pdev);
+
+	/* Some adapters need to be suspended before a
+	* shutdown occurs in order to prevent an error
+	* during kexec.
+	*/
+	radeon_suspend_kms(ddev, true, true, false);
 }
 
 static int radeon_pmops_suspend(struct device *dev)
-- 
2.20.1

[PATCH 4.9 04/47] gpu: drm: radeon: Fix a possible null-pointer dereference in radeon_connector_set_property()

[Greg Kroah-Hartman]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit f3eb9b8f67bc28783eddc142ad805ebdc53d6339 ]

In radeon_connector_set_property(), there is an if statement on line 743
to check whether connector->encoder is NULL:
    if (connector->encoder)

When connector->encoder is NULL, it is used on line 755:
    if (connector->encoder->crtc)

Thus, a possible null-pointer dereference may occur.

To fix this bug, connector->encoder is checked before being used.

This bug is found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_connectors.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index c5e1aa5f1d8ea..efa875120071a 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -764,7 +764,7 @@ static int radeon_connector_set_property(struct drm_connector *connector, struct
 
 		radeon_encoder->output_csc = val;
 
-		if (connector->encoder->crtc) {
+		if (connector->encoder && connector->encoder->crtc) {
 			struct drm_crtc *crtc  = connector->encoder->crtc;
 			const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 			struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
-- 
2.20.1

[PATCH 4.9 05/47] ipmi_si: Only schedule continuously in the thread in maintenance mode

[Greg Kroah-Hartman]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 340ff31ab00bca5c15915e70ad9ada3030c98cf8 ]

ipmi_thread() uses back-to-back schedule() to poll for command
completion which, on some machines, can push up CPU consumption and
heavily tax the scheduler locks leading to noticeable overall
performance degradation.

This was originally added so firmware updates through IPMI would
complete in a timely manner.  But we can't kill the scheduler
locks for that one use case.

Instead, only run schedule() continuously in maintenance mode,
where firmware updates should run.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_si_intf.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index e0a53156b782f..82af658184444 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -283,6 +283,9 @@ struct smi_info {
 	 */
 	bool irq_enable_broken;
 
+	/* Is the driver in maintenance mode? */
+	bool in_maintenance_mode;
+
 	/*
 	 * Did we get an attention that we did not handle?
 	 */
@@ -1093,11 +1096,20 @@ static int ipmi_thread(void *data)
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
 						  &busy_until);
-		if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
+		if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
 			; /* do nothing */
-		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
-			schedule();
-		else if (smi_result == SI_SM_IDLE) {
+		} else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait) {
+			/*
+			 * In maintenance mode we run as fast as
+			 * possible to allow firmware updates to
+			 * complete as fast as possible, but normally
+			 * don't bang on the scheduler.
+			 */
+			if (smi_info->in_maintenance_mode)
+				schedule();
+			else
+				usleep_range(100, 200);
+		} else if (smi_result == SI_SM_IDLE) {
 			if (atomic_read(&smi_info->need_watch)) {
 				schedule_timeout_interruptible(100);
 			} else {
@@ -1105,8 +1117,9 @@ static int ipmi_thread(void *data)
 				__set_current_state(TASK_INTERRUPTIBLE);
 				schedule();
 			}
-		} else
+		} else {
 			schedule_timeout_interruptible(1);
+		}
 	}
 	return 0;
 }
@@ -1285,6 +1298,7 @@ static void set_maintenance_mode(void *send_info, bool enable)
 
 	if (!enable)
 		atomic_set(&smi_info->req_events, 0);
+	smi_info->in_maintenance_mode = enable;
 }
 
 static const struct ipmi_smi_handlers handlers = {
-- 
2.20.1

[PATCH 4.9 06/47] clk: qoriq: Fix -Wunused-const-variable

[Greg Kroah-Hartman]

From: Nathan Huckleberry <nhuck@google.com>

[ Upstream commit a95fb581b144b5e73da382eaedb2e32027610597 ]

drivers/clk/clk-qoriq.c:138:38: warning: unused variable
'p5020_cmux_grp1' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp1

drivers/clk/clk-qoriq.c:146:38: warning: unused variable
'p5020_cmux_grp2' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp2

In the definition of the p5020 chip, the p2041 chip's info was used
instead.  The p5020 and p2041 chips have different info. This is most
likely a typo.

Link: https://github.com/ClangBuiltLinux/linux/issues/525
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lkml.kernel.org/r/20190627220642.78575-1-nhuck@google.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk-qoriq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 80ae2a51452d7..cdce49f6476aa 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -540,7 +540,7 @@ static const struct clockgen_chipinfo chipinfo[] = {
 		.guts_compat = "fsl,qoriq-device-config-1.0",
 		.init_periph = p5020_init_periph,
 		.cmux_groups = {
-			&p2041_cmux_grp1, &p2041_cmux_grp2
+			&p5020_cmux_grp1, &p5020_cmux_grp2
 		},
 		.cmux_to_group = {
 			0, 1, -1
-- 
2.20.1

[PATCH 4.9 07/47] clk: sirf: Dont reference clk_init_data after registration

[Greg Kroah-Hartman]

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit af55dadfbce35b4f4c6247244ce3e44b2e242b84 ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Guo Zeng <Guo.Zeng@csr.com>
Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-6-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sirf/clk-common.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sirf/clk-common.c b/drivers/clk/sirf/clk-common.c
index 77e1e2491689b..edb7197cc4b4d 100644
--- a/drivers/clk/sirf/clk-common.c
+++ b/drivers/clk/sirf/clk-common.c
@@ -298,9 +298,10 @@ static u8 dmn_clk_get_parent(struct clk_hw *hw)
 {
 	struct clk_dmn *clk = to_dmnclk(hw);
 	u32 cfg = clkc_readl(clk->regofs);
+	const char *name = clk_hw_get_name(hw);
 
 	/* parent of io domain can only be pll3 */
-	if (strcmp(hw->init->name, "io") == 0)
+	if (strcmp(name, "io") == 0)
 		return 4;
 
 	WARN_ON((cfg & (BIT(3) - 1)) > 4);
@@ -312,9 +313,10 @@ static int dmn_clk_set_parent(struct clk_hw *hw, u8 parent)
 {
 	struct clk_dmn *clk = to_dmnclk(hw);
 	u32 cfg = clkc_readl(clk->regofs);
+	const char *name = clk_hw_get_name(hw);
 
 	/* parent of io domain can only be pll3 */
-	if (strcmp(hw->init->name, "io") == 0)
+	if (strcmp(name, "io") == 0)
 		return -EINVAL;
 
 	cfg &= ~(BIT(3) - 1);
@@ -354,7 +356,8 @@ static long dmn_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 {
 	unsigned long fin;
 	unsigned ratio, wait, hold;
-	unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+	const char *name = clk_hw_get_name(hw);
+	unsigned bits = (strcmp(name, "mem") == 0) ? 3 : 4;
 
 	fin = *parent_rate;
 	ratio = fin / rate;
@@ -376,7 +379,8 @@ static int dmn_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct clk_dmn *clk = to_dmnclk(hw);
 	unsigned long fin;
 	unsigned ratio, wait, hold, reg;
-	unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+	const char *name = clk_hw_get_name(hw);
+	unsigned bits = (strcmp(name, "mem") == 0) ? 3 : 4;
 
 	fin = parent_rate;
 	ratio = fin / rate;
-- 
2.20.1

[PATCH 4.9 08/47] powerpc/rtas: use device model APIs and serialization during LPM

[Greg Kroah-Hartman]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit a6717c01ddc259f6f73364779df058e2c67309f8 ]

The LPAR migration implementation and userspace-initiated cpu hotplug
can interleave their executions like so:

1. Set cpu 7 offline via sysfs.

2. Begin a partition migration, whose implementation requires the OS
   to ensure all present cpus are online; cpu 7 is onlined:

     rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up

   This sets cpu 7 online in all respects except for the cpu's
   corresponding struct device; dev->offline remains true.

3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is
   already online and returns success. The driver core (device_online)
   sets dev->offline = false.

4. The migration completes and restores cpu 7 to offline state:

     rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down

This leaves cpu7 in a state where the driver core considers the cpu
device online, but in all other respects it is offline and
unused. Attempts to online the cpu via sysfs appear to succeed but the
driver core actually does not pass the request to the lower-level
cpuhp support code. This makes the cpu unusable until the cpu device
is manually set offline and then online again via sysfs.

Instead of directly calling cpu_up/cpu_down, the migration code should
use the higher-level device core APIs to maintain consistent state and
serialize operations.

Fixes: 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-2-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/rtas.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 6a3e5de544ce2..a309a7a29cc60 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -874,15 +874,17 @@ static int rtas_cpu_state_change_mask(enum rtas_cpu_state state,
 		return 0;
 
 	for_each_cpu(cpu, cpus) {
+		struct device *dev = get_cpu_device(cpu);
+
 		switch (state) {
 		case DOWN:
-			cpuret = cpu_down(cpu);
+			cpuret = device_offline(dev);
 			break;
 		case UP:
-			cpuret = cpu_up(cpu);
+			cpuret = device_online(dev);
 			break;
 		}
-		if (cpuret) {
+		if (cpuret < 0) {
 			pr_debug("%s: cpu_%s for cpu#%d returned %d.\n",
 					__func__,
 					((state == UP) ? "up" : "down"),
@@ -971,6 +973,8 @@ int rtas_ibm_suspend_me(u64 handle)
 	data.token = rtas_token("ibm,suspend-me");
 	data.complete = &done;
 
+	lock_device_hotplug();
+
 	/* All present CPUs must be online */
 	cpumask_andnot(offline_mask, cpu_present_mask, cpu_online_mask);
 	cpuret = rtas_online_cpus_mask(offline_mask);
@@ -1002,6 +1006,7 @@ int rtas_ibm_suspend_me(u64 handle)
 				__func__);
 
 out:
+	unlock_device_hotplug();
 	free_cpumask_var(offline_mask);
 	return atomic_read(&data.error);
 }
-- 
2.20.1

[PATCH 4.9 09/47] powerpc/futex: Fix warning: oldval may be used uninitialized in this function

[Greg Kroah-Hartman]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 38a0d0cdb46d3f91534e5b9839ec2d67be14c59d ]

We see warnings such as:
  kernel/futex.c: In function 'do_futex':
  kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
     return oldval == cmparg;
                   ^
  kernel/futex.c:1651:6: note: 'oldval' was declared here
    int oldval, ret;
        ^

This is because arch_futex_atomic_op_inuser() only sets *oval if ret
is 0 and GCC doesn't see that it will only use it when ret is 0.

Anyway, the non-zero ret path is an error path that won't suffer from
setting *oval, and as *oval is a local var in futex_atomic_op_inuser()
it will have no impact.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: reword change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86b72f0c134367b214910b27b9a6dd3321af93bb.1565774657.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/futex.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index f4c7467f74655..b73ab8a7ebc3f 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -60,8 +60,7 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 
 	pagefault_enable();
 
-	if (!ret)
-		*oval = oldval;
+	*oval = oldval;
 
 	return ret;
 }
-- 
2.20.1

[PATCH 4.9 10/47] powerpc/pseries/mobility: use cond_resched when updating device tree

[Greg Kroah-Hartman]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit ccfb5bd71d3d1228090a8633800ae7cdf42a94ac ]

After a partition migration, pseries_devicetree_update() processes
changes to the device tree communicated from the platform to
Linux. This is a relatively heavyweight operation, with multiple
device tree searches, memory allocations, and conversations with
partition firmware.

There's a few levels of nested loops which are bounded only by
decisions made by the platform, outside of Linux's control, and indeed
we have seen RCU stalls on large systems while executing this call
graph. Use cond_resched() in these loops so that the cpu is yielded
when needed.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/mobility.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 3784a7abfcc80..74791e8382d22 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -11,6 +11,7 @@
 
 #include <linux/kernel.h>
 #include <linux/kobject.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/stat.h>
 #include <linux/completion.h>
@@ -206,7 +207,11 @@ static int update_dt_node(__be32 phandle, s32 scope)
 
 				prop_data += vd;
 			}
+
+			cond_resched();
 		}
+
+		cond_resched();
 	} while (rtas_rc == 1);
 
 	of_node_put(dn);
@@ -282,8 +287,12 @@ int pseries_devicetree_update(s32 scope)
 					add_dt_node(phandle, drc_index);
 					break;
 				}
+
+				cond_resched();
 			}
 		}
+
+		cond_resched();
 	} while (rc == 1);
 
 	kfree(rtas_buf);
-- 
2.20.1

[PATCH 4.9 11/47] pinctrl: tegra: Fix write barrier placement in pmx_writel

[Greg Kroah-Hartman]

From: Sowjanya Komatineni <skomatineni@nvidia.com>

[ Upstream commit c2cf351eba2ff6002ce8eb178452219d2521e38e ]

pmx_writel uses writel which inserts write barrier before the
register write.

This patch has fix to replace writel with writel_relaxed followed
by a readback and memory barrier to ensure write operation is
completed for successful pinctrl change.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1565984527-5272-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/tegra/pinctrl-tegra.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
index 277622b4b6fb9..1d9f63e954c71 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
@@ -52,7 +52,9 @@ static inline u32 pmx_readl(struct tegra_pmx *pmx, u32 bank, u32 reg)
 
 static inline void pmx_writel(struct tegra_pmx *pmx, u32 val, u32 bank, u32 reg)
 {
-	writel(val, pmx->regs[bank] + reg);
+	writel_relaxed(val, pmx->regs[bank] + reg);
+	/* make sure pinmux register write completed */
+	pmx_readl(pmx, bank, reg);
 }
 
 static int tegra_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
-- 
2.20.1

[PATCH 4.9 12/47] vfio_pci: Restore original state on release

[Greg Kroah-Hartman]

From: hexin <hexin.op@gmail.com>

[ Upstream commit 92c8026854c25093946e0d7fe536fd9eac440f06 ]

vfio_pci_enable() saves the device's initial configuration information
with the intent that it is restored in vfio_pci_disable().  However,
the commit referenced in Fixes: below replaced the call to
__pci_reset_function_locked(), which is not wrapped in a state save
and restore, with pci_try_reset_function(), which overwrites the
restored device state with the current state before applying it to the
device.  Reinstate use of __pci_reset_function_locked() to return to
the desired behavior.

Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
Signed-off-by: hexin <hexin15@baidu.com>
Signed-off-by: Liu Qi <liuqi16@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index f9a75df2d22d1..a1a712d18e028 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -356,11 +356,20 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
 	pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
 
 	/*
-	 * Try to reset the device.  The success of this is dependent on
-	 * being able to lock the device, which is not always possible.
+	 * Try to get the locks ourselves to prevent a deadlock. The
+	 * success of this is dependent on being able to lock the device,
+	 * which is not always possible.
+	 * We can not use the "try" reset interface here, which will
+	 * overwrite the previously restored configuration information.
 	 */
-	if (vdev->reset_works && !pci_try_reset_function(pdev))
-		vdev->needs_reset = false;
+	if (vdev->reset_works && pci_cfg_access_trylock(pdev)) {
+		if (device_trylock(&pdev->dev)) {
+			if (!__pci_reset_function_locked(pdev))
+				vdev->needs_reset = false;
+			device_unlock(&pdev->dev);
+		}
+		pci_cfg_access_unlock(pdev);
+	}
 
 	pci_restore_state(pdev);
 out:
-- 
2.20.1

[PATCH 4.9 13/47] drm/amdgpu/si: fix ASIC tests

[Greg Kroah-Hartman]

From: Jean Delvare <jdelvare@suse.de>

[ Upstream commit 77efe48a729588527afb4d5811b9e0acb29f5e51 ]

Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/si.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/si.c b/drivers/gpu/drm/amd/amdgpu/si.c
index 327bdf13e8bc8..b0beb5e537bcb 100644
--- a/drivers/gpu/drm/amd/amdgpu/si.c
+++ b/drivers/gpu/drm/amd/amdgpu/si.c
@@ -1606,7 +1606,7 @@ static void si_program_aspm(struct amdgpu_device *adev)
 			if (orig != data)
 				si_pif_phy1_wreg(adev,PB1_PIF_PWRDOWN_1, data);
 
-			if ((adev->family != CHIP_OLAND) && (adev->family != CHIP_HAINAN)) {
+			if ((adev->asic_type != CHIP_OLAND) && (adev->asic_type != CHIP_HAINAN)) {
 				orig = data = si_pif_phy0_rreg(adev,PB0_PIF_PWRDOWN_0);
 				data &= ~PLL_RAMP_UP_TIME_0_MASK;
 				if (orig != data)
@@ -1655,14 +1655,14 @@ static void si_program_aspm(struct amdgpu_device *adev)
 
 			orig = data = si_pif_phy0_rreg(adev,PB0_PIF_CNTL);
 			data &= ~LS2_EXIT_TIME_MASK;
-			if ((adev->family == CHIP_OLAND) || (adev->family == CHIP_HAINAN))
+			if ((adev->asic_type == CHIP_OLAND) || (adev->asic_type == CHIP_HAINAN))
 				data |= LS2_EXIT_TIME(5);
 			if (orig != data)
 				si_pif_phy0_wreg(adev,PB0_PIF_CNTL, data);
 
 			orig = data = si_pif_phy1_rreg(adev,PB1_PIF_CNTL);
 			data &= ~LS2_EXIT_TIME_MASK;
-			if ((adev->family == CHIP_OLAND) || (adev->family == CHIP_HAINAN))
+			if ((adev->asic_type == CHIP_OLAND) || (adev->asic_type == CHIP_HAINAN))
 				data |= LS2_EXIT_TIME(5);
 			if (orig != data)
 				si_pif_phy1_wreg(adev,PB1_PIF_CNTL, data);
-- 
2.20.1

[PATCH 4.9 14/47] powerpc/64s/exception: machine check use correct cfar for late handler

[Greg Kroah-Hartman]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 0b66370c61fcf5fcc1d6901013e110284da6e2bb ]

Bare metal machine checks run an "early" handler in real mode before
running the main handler which reports the event.

The main handler runs exactly as a normal interrupt handler, after the
"windup" which sets registers back as they were at interrupt entry.
CFAR does not get restored by the windup code, so that will be wrong
when the handler is run.

Restore the CFAR to the saved value before running the late handler.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802105709.27696-8-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/exceptions-64s.S | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 92474227262b4..0c8b966e80702 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -467,6 +467,10 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
 	RFI_TO_USER_OR_KERNEL
 9:
 	/* Deliver the machine check to host kernel in V mode. */
+BEGIN_FTR_SECTION
+	ld	r10,ORIG_GPR3(r1)
+	mtspr	SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	MACHINE_CHECK_HANDLER_WINDUP
 	b	machine_check_pSeries
 
-- 
2.20.1

[PATCH 4.9 15/47] powerpc/pseries: correctly track irq state in default idle

[Greg Kroah-Hartman]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit 92c94dfb69e350471473fd3075c74bc68150879e ]

prep_irq_for_idle() is intended to be called before entering
H_CEDE (and it is used by the pseries cpuidle driver). However the
default pseries idle routine does not call it, leading to mismanaged
lazy irq state when the cpuidle driver isn't in use. Manifestations of
this include:

* Dropped IPIs in the time immediately after a cpu comes
  online (before it has installed the cpuidle handler), making the
  online operation block indefinitely waiting for the new cpu to
  respond.

* Hitting this WARN_ON in arch_local_irq_restore():
	/*
	 * We should already be hard disabled here. We had bugs
	 * where that wasn't the case so let's dbl check it and
	 * warn if we are wrong. Only do that when IRQ tracing
	 * is enabled as mfmsr() can be costly.
	 */
	if (WARN_ON_ONCE(mfmsr() & MSR_EE))
		__hard_irq_disable();

Call prep_irq_for_idle() from pseries_lpar_idle() and honor its
result.

Fixes: 363edbe2614a ("powerpc: Default arch idle could cede processor on pseries")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/setup.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index adb09ab87f7c0..30782859d8980 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -298,6 +298,9 @@ static void pseries_lpar_idle(void)
 	 * low power mode by ceding processor to hypervisor
 	 */
 
+	if (!prep_irq_for_idle())
+		return;
+
 	/* Indicate to hypervisor that we are idle. */
 	get_lppaca()->idle = 1;
 
-- 
2.20.1

[PATCH 4.9 16/47] arm64: fix unreachable code issue with cmpxchg

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 920fdab7b3ce98c14c840261e364f490f3679a62 ]

On arm64 build with clang, sometimes the __cmpxchg_mb is not inlined
when CONFIG_OPTIMIZE_INLINING is set.
Clang then fails a compile-time assertion, because it cannot tell at
compile time what the size of the argument is:

mm/memcontrol.o: In function `__cmpxchg_mb':
memcontrol.c:(.text+0x1a4c): undefined reference to `__compiletime_assert_175'
memcontrol.c:(.text+0x1a4c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `__compiletime_assert_175'

Mark all of the cmpxchg() style functions as __always_inline to
ensure that the compiler can see the result.

Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/648
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Tested-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/cmpxchg.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
index 0f2e1ab5e1666..9b2e2e2e728ae 100644
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -73,7 +73,7 @@ __XCHG_CASE( ,  ,  mb_8, dmb ish, nop,  , a, l, "memory")
 #undef __XCHG_CASE
 
 #define __XCHG_GEN(sfx)							\
-static inline unsigned long __xchg##sfx(unsigned long x,		\
+static __always_inline  unsigned long __xchg##sfx(unsigned long x,	\
 					volatile void *ptr,		\
 					int size)			\
 {									\
@@ -115,7 +115,7 @@ __XCHG_GEN(_mb)
 #define xchg(...)		__xchg_wrapper( _mb, __VA_ARGS__)
 
 #define __CMPXCHG_GEN(sfx)						\
-static inline unsigned long __cmpxchg##sfx(volatile void *ptr,		\
+static __always_inline unsigned long __cmpxchg##sfx(volatile void *ptr,	\
 					   unsigned long old,		\
 					   unsigned long new,		\
 					   int size)			\
@@ -248,7 +248,7 @@ __CMPWAIT_CASE( ,  , 8);
 #undef __CMPWAIT_CASE
 
 #define __CMPWAIT_GEN(sfx)						\
-static inline void __cmpwait##sfx(volatile void *ptr,			\
+static __always_inline void __cmpwait##sfx(volatile void *ptr,		\
 				  unsigned long val,			\
 				  int size)				\
 {									\
-- 
2.20.1

[PATCH 4.9 17/47] clk: at91: select parent if main oscillator or bypass is enabled

[Greg Kroah-Hartman]

From: Eugen Hristev <eugen.hristev@microchip.com>

[ Upstream commit 69a6bcde7fd3fe6f3268ce26f31d9d9378384c98 ]

Selecting the right parent for the main clock is done using only
main oscillator enabled bit.
In case we have this oscillator bypassed by an external signal (no driving
on the XOUT line), we still use external clock, but with BYPASS bit set.
So, in this case we must select the same parent as before.
Create a macro that will select the right parent considering both bits from
the MOR register.
Use this macro when looking for the right parent.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568042692-11784-2-git-send-email-eugen.hristev@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/clk-main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index c813c27f2e58c..2f97a843d6d6b 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -27,6 +27,10 @@
 
 #define MOR_KEY_MASK		(0xff << 16)
 
+#define clk_main_parent_select(s)	(((s) & \
+					(AT91_PMC_MOSCEN | \
+					AT91_PMC_OSCBYPASS)) ? 1 : 0)
+
 struct clk_main_osc {
 	struct clk_hw hw;
 	struct regmap *regmap;
@@ -119,7 +123,7 @@ static int clk_main_osc_is_prepared(struct clk_hw *hw)
 
 	regmap_read(regmap, AT91_PMC_SR, &status);
 
-	return (status & AT91_PMC_MOSCS) && (tmp & AT91_PMC_MOSCEN);
+	return (status & AT91_PMC_MOSCS) && clk_main_parent_select(tmp);
 }
 
 static const struct clk_ops main_osc_ops = {
@@ -530,7 +534,7 @@ static u8 clk_sam9x5_main_get_parent(struct clk_hw *hw)
 
 	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
 
-	return status & AT91_PMC_MOSCEN ? 1 : 0;
+	return clk_main_parent_select(status);
 }
 
 static const struct clk_ops sam9x5_main_ops = {
@@ -572,7 +576,7 @@ at91_clk_register_sam9x5_main(struct regmap *regmap,
 	clkmain->hw.init = &init;
 	clkmain->regmap = regmap;
 	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
-	clkmain->parent = status & AT91_PMC_MOSCEN ? 1 : 0;
+	clkmain->parent = clk_main_parent_select(status);
 
 	hw = &clkmain->hw;
 	ret = clk_hw_register(NULL, &clkmain->hw);
-- 
2.20.1

[PATCH 4.9 18/47] scsi: core: Reduce memory required for SCSI logging

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit dccc96abfb21dc19d69e707c38c8ba439bba7160 ]

The data structure used for log messages is so large that it can cause a
boot failure. Since allocations from that data structure can fail anyway,
use kmalloc() / kfree() instead of that data structure.

See also https://bugzilla.kernel.org/show_bug.cgi?id=204119.
See also commit ded85c193a39 ("scsi: Implement per-cpu logging buffer") # v4.0.

Reported-by: Jan Palus <jpalus@fastmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Palus <jpalus@fastmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_logging.c | 48 +++----------------------------------
 include/scsi/scsi_dbg.h     |  2 --
 2 files changed, 3 insertions(+), 47 deletions(-)

diff --git a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c
index bd70339c1242e..03d9855a6afd7 100644
--- a/drivers/scsi/scsi_logging.c
+++ b/drivers/scsi/scsi_logging.c
@@ -16,57 +16,15 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dbg.h>
 
-#define SCSI_LOG_SPOOLSIZE 4096
-
-#if (SCSI_LOG_SPOOLSIZE / SCSI_LOG_BUFSIZE) > BITS_PER_LONG
-#warning SCSI logging bitmask too large
-#endif
-
-struct scsi_log_buf {
-	char buffer[SCSI_LOG_SPOOLSIZE];
-	unsigned long map;
-};
-
-static DEFINE_PER_CPU(struct scsi_log_buf, scsi_format_log);
-
 static char *scsi_log_reserve_buffer(size_t *len)
 {
-	struct scsi_log_buf *buf;
-	unsigned long map_bits = sizeof(buf->buffer) / SCSI_LOG_BUFSIZE;
-	unsigned long idx = 0;
-
-	preempt_disable();
-	buf = this_cpu_ptr(&scsi_format_log);
-	idx = find_first_zero_bit(&buf->map, map_bits);
-	if (likely(idx < map_bits)) {
-		while (test_and_set_bit(idx, &buf->map)) {
-			idx = find_next_zero_bit(&buf->map, map_bits, idx);
-			if (idx >= map_bits)
-				break;
-		}
-	}
-	if (WARN_ON(idx >= map_bits)) {
-		preempt_enable();
-		return NULL;
-	}
-	*len = SCSI_LOG_BUFSIZE;
-	return buf->buffer + idx * SCSI_LOG_BUFSIZE;
+	*len = 128;
+	return kmalloc(*len, GFP_ATOMIC);
 }
 
 static void scsi_log_release_buffer(char *bufptr)
 {
-	struct scsi_log_buf *buf;
-	unsigned long idx;
-	int ret;
-
-	buf = this_cpu_ptr(&scsi_format_log);
-	if (bufptr >= buf->buffer &&
-	    bufptr < buf->buffer + SCSI_LOG_SPOOLSIZE) {
-		idx = (bufptr - buf->buffer) / SCSI_LOG_BUFSIZE;
-		ret = test_and_clear_bit(idx, &buf->map);
-		WARN_ON(!ret);
-	}
-	preempt_enable();
+	kfree(bufptr);
 }
 
 static inline const char *scmd_name(const struct scsi_cmnd *scmd)
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
index 56710e03101c6..1fcf14aee28a8 100644
--- a/include/scsi/scsi_dbg.h
+++ b/include/scsi/scsi_dbg.h
@@ -5,8 +5,6 @@ struct scsi_cmnd;
 struct scsi_device;
 struct scsi_sense_hdr;
 
-#define SCSI_LOG_BUFSIZE 128
-
 extern void scsi_print_command(struct scsi_cmnd *);
 extern size_t __scsi_format_command(char *, size_t,
 				   const unsigned char *, size_t);
-- 
2.20.1

[PATCH 4.9 19/47] MIPS: tlbex: Explicitly cast _PAGE_NO_EXEC to a boolean

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit c59ae0a1055127dd3828a88e111a0db59b254104 ]

clang warns:

arch/mips/mm/tlbex.c:634:19: error: use of logical '&&' with constant
operand [-Werror,-Wconstant-logical-operand]
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                         ^  ~~~~~~~~~~~~~
arch/mips/mm/tlbex.c:634:19: note: use '&' for a bitwise operation
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                         ^~
                         &
arch/mips/mm/tlbex.c:634:19: note: remove constant to silence this
warning
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                        ~^~~~~~~~~~~~~~~~
1 error generated.

Explicitly cast this value to a boolean so that clang understands we
intend for this to be a non-zero value.

Fixes: 00bf1c691d08 ("MIPS: tlbex: Avoid placing software PTE bits in Entry* PFN fields")
Link: https://github.com/ClangBuiltLinux/linux/issues/609
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/mm/tlbex.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 3cc5b2e4263c0..47d50197789be 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -637,7 +637,7 @@ static __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
 		return;
 	}
 
-	if (cpu_has_rixi && _PAGE_NO_EXEC) {
+	if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
 		if (fill_includes_sw_bits) {
 			UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
 		} else {
-- 
2.20.1

[PATCH 4.9 20/47] mfd: intel-lpss: Remove D3cold delay

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 76380a607ba0b28627c9b4b55cd47a079a59624b ]

Goodix touchpad may drop its first couple input events when
i2c-designware-platdrv and intel-lpss it connects to took too long to
runtime resume from runtime suspended state.

This issue happens becuase the touchpad has a rather small buffer to
store up to 13 input events, so if the host doesn't read those events in
time (i.e. runtime resume takes too long), events are dropped from the
touchpad's buffer.

The bottleneck is D3cold delay it waits when transitioning from D3cold
to D0, hence remove the delay to make the resume faster. I've tested
some systems with intel-lpss and haven't seen any regression.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202683
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/intel-lpss-pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
index 9ff243970e93e..5b41111e62fd1 100644
--- a/drivers/mfd/intel-lpss-pci.c
+++ b/drivers/mfd/intel-lpss-pci.c
@@ -39,6 +39,8 @@ static int intel_lpss_pci_probe(struct pci_dev *pdev,
 	info->mem = &pdev->resource[0];
 	info->irq = pdev->irq;
 
+	pdev->d3cold_delay = 0;
+
 	/* Probably it is enough to set this for iDMA capable devices only */
 	pci_set_master(pdev);
 
-- 
2.20.1

[PATCH 4.9 21/47] PCI: tegra: Fix OF node reference leak

[Greg Kroah-Hartman]

From: Nishka Dasgupta <nishkadg.linux@gmail.com>

[ Upstream commit 9e38e690ace3e7a22a81fc02652fc101efb340cf ]

Each iteration of for_each_child_of_node() executes of_node_put() on the
previous node, but in some return paths in the middle of the loop
of_node_put() is missing thus causing a reference leak.

Hence stash these mid-loop return values in a variable 'err' and add a
new label err_node_put which executes of_node_put() on the previous node
and returns 'err' on failure.

Change mid-loop return statements to point to jump to this label to
fix the reference leak.

Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
[lorenzo.pieralisi@arm.com: rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pci-tegra.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 8dfccf7332411..8e101b19c4d6f 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -1898,14 +1898,15 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		err = of_pci_get_devfn(port);
 		if (err < 0) {
 			dev_err(dev, "failed to parse address: %d\n", err);
-			return err;
+			goto err_node_put;
 		}
 
 		index = PCI_SLOT(err);
 
 		if (index < 1 || index > soc->num_ports) {
 			dev_err(dev, "invalid port number: %d\n", index);
-			return -EINVAL;
+			err = -EINVAL;
+			goto err_node_put;
 		}
 
 		index--;
@@ -1914,12 +1915,13 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		if (err < 0) {
 			dev_err(dev, "failed to parse # of lanes: %d\n",
 				err);
-			return err;
+			goto err_node_put;
 		}
 
 		if (value > 16) {
 			dev_err(dev, "invalid # of lanes: %u\n", value);
-			return -EINVAL;
+			err = -EINVAL;
+			goto err_node_put;
 		}
 
 		lanes |= value << (index << 3);
@@ -1933,13 +1935,15 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		lane += value;
 
 		rp = devm_kzalloc(dev, sizeof(*rp), GFP_KERNEL);
-		if (!rp)
-			return -ENOMEM;
+		if (!rp) {
+			err = -ENOMEM;
+			goto err_node_put;
+		}
 
 		err = of_address_to_resource(port, 0, &rp->regs);
 		if (err < 0) {
 			dev_err(dev, "failed to parse address: %d\n", err);
-			return err;
+			goto err_node_put;
 		}
 
 		INIT_LIST_HEAD(&rp->list);
@@ -1966,6 +1970,10 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		return err;
 
 	return 0;
+
+err_node_put:
+	of_node_put(port);
+	return err;
 }
 
 /*
-- 
2.20.1

[PATCH 4.9 22/47] ARM: 8898/1: mm: Dont treat faults reported from cache maintenance as writes

[Greg Kroah-Hartman]

From: Will Deacon <will@kernel.org>

[ Upstream commit 834020366da9ab3fb87d1eb9a3160eb22dbed63a ]

Translation faults arising from cache maintenance instructions are
rather unhelpfully reported with an FSR value where the WnR field is set
to 1, indicating that the faulting access was a write. Since cache
maintenance instructions on 32-bit ARM do not require any particular
permissions, this can cause our private 'cacheflush' system call to fail
spuriously if a translation fault is generated due to page aging when
targetting a read-only VMA.

In this situation, we will return -EFAULT to userspace, although this is
unfortunately suppressed by the popular '__builtin___clear_cache()'
intrinsic provided by GCC, which returns void.

Although it's tempting to write this off as a userspace issue, we can
actually do a little bit better on CPUs that support LPAE, even if the
short-descriptor format is in use. On these CPUs, cache maintenance
faults additionally set the CM field in the FSR, which we can use to
suppress the write permission checks in the page fault handler and
succeed in performing cache maintenance to read-only areas even in the
presence of a translation fault.

Reported-by: Orion Hodson <oth@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/fault.c | 4 ++--
 arch/arm/mm/fault.h | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 5ca207ada8524..2539c8f9fb3fa 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -214,7 +214,7 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
 {
 	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
 
-	if (fsr & FSR_WRITE)
+	if ((fsr & FSR_WRITE) && !(fsr & FSR_CM))
 		mask = VM_WRITE;
 	if (fsr & FSR_LNX_PF)
 		mask = VM_EXEC;
@@ -284,7 +284,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (user_mode(regs))
 		flags |= FAULT_FLAG_USER;
-	if (fsr & FSR_WRITE)
+	if ((fsr & FSR_WRITE) && !(fsr & FSR_CM))
 		flags |= FAULT_FLAG_WRITE;
 
 	/*
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index afc1f84e763b2..9bc272642d55a 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -5,6 +5,7 @@
  * Fault status register encodings.  We steal bit 31 for our own purposes.
  */
 #define FSR_LNX_PF		(1 << 31)
+#define FSR_CM			(1 << 13)
 #define FSR_WRITE		(1 << 11)
 #define FSR_FS4			(1 << 10)
 #define FSR_FS3_0		(15)
-- 
2.20.1

[PATCH 4.9 23/47] HID: apple: Fix stuck function keys when using FN

[Greg Kroah-Hartman]

From: Joao Moreno <mail@joaomoreno.com>

[ Upstream commit aec256d0ecd561036f188dbc8fa7924c47a9edfd ]

This fixes an issue in which key down events for function keys would be
repeatedly emitted even after the user has raised the physical key. For
example, the driver fails to emit the F5 key up event when going through
the following steps:
- fnmode=1: hold FN, hold F5, release FN, release F5
- fnmode=2: hold F5, hold FN, release F5, release FN

The repeated F5 key down events can be easily verified using xev.

Signed-off-by: Joao Moreno <mail@joaomoreno.com>
Co-developed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-apple.c | 49 +++++++++++++++++++++++------------------
 1 file changed, 28 insertions(+), 21 deletions(-)

diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 65a0c79f212e1..31c087e1746d6 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -55,7 +55,6 @@ MODULE_PARM_DESC(swap_opt_cmd, "Swap the Option (\"Alt\") and Command (\"Flag\")
 struct apple_sc {
 	unsigned long quirks;
 	unsigned int fn_on;
-	DECLARE_BITMAP(pressed_fn, KEY_CNT);
 	DECLARE_BITMAP(pressed_numlock, KEY_CNT);
 };
 
@@ -182,6 +181,8 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 {
 	struct apple_sc *asc = hid_get_drvdata(hid);
 	const struct apple_key_translation *trans, *table;
+	bool do_translate;
+	u16 code = 0;
 
 	if (usage->code == KEY_FN) {
 		asc->fn_on = !!value;
@@ -190,8 +191,6 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 	}
 
 	if (fnmode) {
-		int do_translate;
-
 		if (hid->product >= USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI &&
 				hid->product <= USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS)
 			table = macbookair_fn_keys;
@@ -203,25 +202,33 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 		trans = apple_find_translation (table, usage->code);
 
 		if (trans) {
-			if (test_bit(usage->code, asc->pressed_fn))
-				do_translate = 1;
-			else if (trans->flags & APPLE_FLAG_FKEY)
-				do_translate = (fnmode == 2 && asc->fn_on) ||
-					(fnmode == 1 && !asc->fn_on);
-			else
-				do_translate = asc->fn_on;
-
-			if (do_translate) {
-				if (value)
-					set_bit(usage->code, asc->pressed_fn);
-				else
-					clear_bit(usage->code, asc->pressed_fn);
-
-				input_event(input, usage->type, trans->to,
-						value);
-
-				return 1;
+			if (test_bit(trans->from, input->key))
+				code = trans->from;
+			else if (test_bit(trans->to, input->key))
+				code = trans->to;
+
+			if (!code) {
+				if (trans->flags & APPLE_FLAG_FKEY) {
+					switch (fnmode) {
+					case 1:
+						do_translate = !asc->fn_on;
+						break;
+					case 2:
+						do_translate = asc->fn_on;
+						break;
+					default:
+						/* should never happen */
+						do_translate = false;
+					}
+				} else {
+					do_translate = asc->fn_on;
+				}
+
+				code = do_translate ? trans->to : trans->from;
 			}
+
+			input_event(input, usage->type, code, value);
+			return 1;
 		}
 
 		if (asc->quirks & APPLE_NUMLOCK_EMULATION &&
-- 
2.20.1

[PATCH 4.9 24/47] security: smack: Fix possible null-pointer dereferences in smack_socket_sock_rcv_skb()

[Greg Kroah-Hartman]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 3f4287e7d98a2954f20bf96c567fdffcd2b63eb9 ]

In smack_socket_sock_rcv_skb(), there is an if statement
on line 3920 to check whether skb is NULL:
    if (skb && skb->secmark != 0)

This check indicates skb can be NULL in some cases.

But on lines 3931 and 3932, skb is used:
    ad.a.u.net->netif = skb->skb_iif;
    ipv6_skb_to_auditdata(skb, &ad.a, NULL);

Thus, possible null-pointer dereferences may occur when skb is NULL.

To fix these possible bugs, an if statement is added to check skb.

These bugs are found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/smack/smack_lsm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index aeb3ba70f9077..19d1702aa9856 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -4037,6 +4037,8 @@ access_check:
 			skp = smack_ipv6host_label(&sadd);
 		if (skp == NULL)
 			skp = smack_net_ambient;
+		if (skb == NULL)
+			break;
 #ifdef CONFIG_AUDIT
 		smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
 		ad.a.u.net->family = family;
-- 
2.20.1

[PATCH 4.9 25/47] ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address

[Greg Kroah-Hartman]

From: Mike Rapoport <mike.rapoport@gmail.com>

[ Upstream commit 00d2ec1e6bd82c0538e6dd3e4a4040de93ba4fef ]

The calculation of memblock_limit in adjust_lowmem_bounds() assumes that
bank 0 starts from a PMD-aligned address. However, the beginning of the
first bank may be NOMAP memory and the start of usable memory
will be not aligned to PMD boundary. In such case the memblock_limit will
be set to the end of the NOMAP region, which will prevent any memblock
allocations.

Mark the region between the end of the NOMAP area and the next PMD-aligned
address as NOMAP as well, so that the usable memory will start at
PMD-aligned address.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/mmu.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index f7c741358f37e..241bf898adf5b 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1168,6 +1168,22 @@ void __init adjust_lowmem_bounds(void)
 	 */
 	vmalloc_limit = (u64)(uintptr_t)vmalloc_min - PAGE_OFFSET + PHYS_OFFSET;
 
+	/*
+	 * The first usable region must be PMD aligned. Mark its start
+	 * as MEMBLOCK_NOMAP if it isn't
+	 */
+	for_each_memblock(memory, reg) {
+		if (!memblock_is_nomap(reg)) {
+			if (!IS_ALIGNED(reg->base, PMD_SIZE)) {
+				phys_addr_t len;
+
+				len = round_up(reg->base, PMD_SIZE) - reg->base;
+				memblock_mark_nomap(reg->base, len);
+			}
+			break;
+		}
+	}
+
 	for_each_memblock(memory, reg) {
 		phys_addr_t block_start = reg->base;
 		phys_addr_t block_end = reg->base + reg->size;
-- 
2.20.1

[PATCH 4.9 26/47] fat: work around race with userspaces read via blockdev while mounting

[Greg Kroah-Hartman]

From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

[ Upstream commit 07bfa4415ab607e459b69bd86aa7e7602ce10b4f ]

If userspace reads the buffer via blockdev while mounting,
sb_getblk()+modify can race with buffer read via blockdev.

For example,

            FS                               userspace
    bh = sb_getblk()
    modify bh->b_data
                                  read
				    ll_rw_block(bh)
				      fill bh->b_data by on-disk data
				      /* lost modified data by FS */
				      set_buffer_uptodate(bh)
    set_buffer_uptodate(bh)

Userspace should not use the blockdev while mounting though, the udev
seems to be already doing this.  Although I think the udev should try to
avoid this, workaround the race by small overhead.

Link: http://lkml.kernel.org/r/87pnk7l3sw.fsf_-_@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fat/dir.c    | 13 +++++++++++--
 fs/fat/fatent.c |  3 +++
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 81cecbe6d7cf6..971e369517a73 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -1097,8 +1097,11 @@ static int fat_zeroed_cluster(struct inode *dir, sector_t blknr, int nr_used,
 			err = -ENOMEM;
 			goto error;
 		}
+		/* Avoid race with userspace read via bdev */
+		lock_buffer(bhs[n]);
 		memset(bhs[n]->b_data, 0, sb->s_blocksize);
 		set_buffer_uptodate(bhs[n]);
+		unlock_buffer(bhs[n]);
 		mark_buffer_dirty_inode(bhs[n], dir);
 
 		n++;
@@ -1155,6 +1158,8 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts)
 	fat_time_unix2fat(sbi, ts, &time, &date, &time_cs);
 
 	de = (struct msdos_dir_entry *)bhs[0]->b_data;
+	/* Avoid race with userspace read via bdev */
+	lock_buffer(bhs[0]);
 	/* filling the new directory slots ("." and ".." entries) */
 	memcpy(de[0].name, MSDOS_DOT, MSDOS_NAME);
 	memcpy(de[1].name, MSDOS_DOTDOT, MSDOS_NAME);
@@ -1177,6 +1182,7 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts)
 	de[0].size = de[1].size = 0;
 	memset(de + 2, 0, sb->s_blocksize - 2 * sizeof(*de));
 	set_buffer_uptodate(bhs[0]);
+	unlock_buffer(bhs[0]);
 	mark_buffer_dirty_inode(bhs[0], dir);
 
 	err = fat_zeroed_cluster(dir, blknr, 1, bhs, MAX_BUF_PER_PAGE);
@@ -1234,11 +1240,14 @@ static int fat_add_new_entries(struct inode *dir, void *slots, int nr_slots,
 
 			/* fill the directory entry */
 			copy = min(size, sb->s_blocksize);
+			/* Avoid race with userspace read via bdev */
+			lock_buffer(bhs[n]);
 			memcpy(bhs[n]->b_data, slots, copy);
-			slots += copy;
-			size -= copy;
 			set_buffer_uptodate(bhs[n]);
+			unlock_buffer(bhs[n]);
 			mark_buffer_dirty_inode(bhs[n], dir);
+			slots += copy;
+			size -= copy;
 			if (!size)
 				break;
 			n++;
diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c
index a9cad9b60790b..0129d4d07a544 100644
--- a/fs/fat/fatent.c
+++ b/fs/fat/fatent.c
@@ -389,8 +389,11 @@ static int fat_mirror_bhs(struct super_block *sb, struct buffer_head **bhs,
 				err = -ENOMEM;
 				goto error;
 			}
+			/* Avoid race with userspace read via bdev */
+			lock_buffer(c_bh);
 			memcpy(c_bh->b_data, bhs[n]->b_data, sb->s_blocksize);
 			set_buffer_uptodate(c_bh);
+			unlock_buffer(c_bh);
 			mark_buffer_dirty_inode(c_bh, sbi->fat_inode);
 			if (sb->s_flags & MS_SYNCHRONOUS)
 				err = sync_dirty_buffer(c_bh);
-- 
2.20.1

[PATCH 4.9 27/47] hypfs: Fix error number left in struct pointer member

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit b54c64f7adeb241423cd46598f458b5486b0375e ]

In hypfs_fill_super(), if hypfs_create_update_file() fails,
sbi->update_file is left holding an error number.  This is passed to
hypfs_kill_super() which doesn't check for this.

Fix this by not setting sbi->update_value until after we've checked for
error.

Fixes: 24bbb1faf3f0 ("[PATCH] s390_hypfs filesystem")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
cc: Heiko Carstens <heiko.carstens@de.ibm.com>
cc: linux-s390@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/hypfs/inode.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 2a17123130d30..224aeda1e8ccf 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -267,7 +267,7 @@ static int hypfs_show_options(struct seq_file *s, struct dentry *root)
 static int hypfs_fill_super(struct super_block *sb, void *data, int silent)
 {
 	struct inode *root_inode;
-	struct dentry *root_dentry;
+	struct dentry *root_dentry, *update_file;
 	int rc = 0;
 	struct hypfs_sb_info *sbi;
 
@@ -298,9 +298,10 @@ static int hypfs_fill_super(struct super_block *sb, void *data, int silent)
 		rc = hypfs_diag_create_files(root_dentry);
 	if (rc)
 		return rc;
-	sbi->update_file = hypfs_create_update_file(root_dentry);
-	if (IS_ERR(sbi->update_file))
-		return PTR_ERR(sbi->update_file);
+	update_file = hypfs_create_update_file(root_dentry);
+	if (IS_ERR(update_file))
+		return PTR_ERR(update_file);
+	sbi->update_file = update_file;
 	hypfs_update_update(sb);
 	pr_info("Hypervisor filesystem mounted\n");
 	return 0;
-- 
2.20.1

[PATCH 4.9 28/47] ocfs2: wait for recovering done after direct unlock request

[Greg Kroah-Hartman]

From: Changwei Ge <gechangwei@live.cn>

[ Upstream commit 0a3775e4f883912944481cf2ef36eb6383a9cc74 ]

There is a scenario causing ocfs2 umount hang when multiple hosts are
rebooting at the same time.

NODE1                           NODE2               NODE3
send unlock requset to NODE2
                                dies
                                                    become recovery master
                                                    recover NODE2
find NODE2 dead
mark resource RECOVERING
directly remove lock from grant list
calculate usage but RECOVERING marked
**miss the window of purging
clear RECOVERING

To reproduce this issue, crash a host and then umount ocfs2
from another node.

To solve this, just let unlock progress wait for recovery done.

Link: http://lkml.kernel.org/r/1550124866-20367-1-git-send-email-gechangwei@live.cn
Signed-off-by: Changwei Ge <gechangwei@live.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/dlm/dlmunlock.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c
index 1082b2c3014be..5f2a120240e51 100644
--- a/fs/ocfs2/dlm/dlmunlock.c
+++ b/fs/ocfs2/dlm/dlmunlock.c
@@ -105,7 +105,8 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 	enum dlm_status status;
 	int actions = 0;
 	int in_use;
-        u8 owner;
+	u8 owner;
+	int recovery_wait = 0;
 
 	mlog(0, "master_node = %d, valblk = %d\n", master_node,
 	     flags & LKM_VALBLK);
@@ -208,9 +209,12 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 		}
 		if (flags & LKM_CANCEL)
 			lock->cancel_pending = 0;
-		else
-			lock->unlock_pending = 0;
-
+		else {
+			if (!lock->unlock_pending)
+				recovery_wait = 1;
+			else
+				lock->unlock_pending = 0;
+		}
 	}
 
 	/* get an extra ref on lock.  if we are just switching
@@ -244,6 +248,17 @@ leave:
 	spin_unlock(&res->spinlock);
 	wake_up(&res->wq);
 
+	if (recovery_wait) {
+		spin_lock(&res->spinlock);
+		/* Unlock request will directly succeed after owner dies,
+		 * and the lock is already removed from grant list. We have to
+		 * wait for RECOVERING done or we miss the chance to purge it
+		 * since the removement is much faster than RECOVERING proc.
+		 */
+		__dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_RECOVERING);
+		spin_unlock(&res->spinlock);
+	}
+
 	/* let the caller's final dlm_lock_put handle the actual kfree */
 	if (actions & DLM_UNLOCK_FREE_LOCK) {
 		/* this should always be coupled with list removal */
-- 
2.20.1

[PATCH 4.9 29/47] kmemleak: increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE default to 16K

[Greg Kroah-Hartman]

From: Nicolas Boichat <drinkcat@chromium.org>

[ Upstream commit b751c52bb587ae66f773b15204ef7a147467f4c7 ]

The current default value (400) is too low on many systems (e.g.  some
ARM64 platform takes up 1000+ entries).

syzbot uses 16000 as default value, and has proved to be enough on beefy
configurations, so let's pick that value.

This consumes more RAM on boot (each entry is 160 bytes, so in total
~2.5MB of RAM), but the memory would later be freed (early_log is
__initdata).

Link: http://lkml.kernel.org/r/20190730154027.101525-1-drinkcat@chromium.org
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/Kconfig.debug | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4f561860bf41e..bc5ff3a53d4a6 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -535,7 +535,7 @@ config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
 	int "Maximum kmemleak early log entries"
 	depends on DEBUG_KMEMLEAK
 	range 200 40000
-	default 400
+	default 16000
 	help
 	  Kmemleak must track all the memory allocations to avoid
 	  reporting false positives. Since memory may be allocated or
-- 
2.20.1

[PATCH 4.9 30/47] ANDROID: binder: remove waitqueue when thread exits.

[Greg Kroah-Hartman]

From: Martijn Coenen <maco@android.com>

commit f5cb779ba16334b45ba8946d6bfa6d9834d1527f upstream.

binder_poll() passes the thread->wait waitqueue that
can be slept on for work. When a thread that uses
epoll explicitly exits using BINDER_THREAD_EXIT,
the waitqueue is freed, but it is never removed
from the corresponding epoll data structure. When
the process subsequently exits, the epoll cleanup
code tries to access the waitlist, which results in
a use-after-free.

Prevent this by using POLLFREE when the thread exits.

Signed-off-by: Martijn Coenen <maco@android.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable <stable@vger.kernel.org> # 4.14
[backport BINDER_LOOPER_STATE_POLL logic as well]
Signed-off-by: Mattias Nissler <mnissler@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder.c |   17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -334,7 +334,8 @@ enum {
 	BINDER_LOOPER_STATE_EXITED      = 0x04,
 	BINDER_LOOPER_STATE_INVALID     = 0x08,
 	BINDER_LOOPER_STATE_WAITING     = 0x10,
-	BINDER_LOOPER_STATE_NEED_RETURN = 0x20
+	BINDER_LOOPER_STATE_NEED_RETURN = 0x20,
+	BINDER_LOOPER_STATE_POLL	= 0x40,
 };
 
 struct binder_thread {
@@ -2628,6 +2629,18 @@ static int binder_free_thread(struct bin
 		} else
 			BUG();
 	}
+
+	/*
+	 * If this thread used poll, make sure we remove the waitqueue
+	 * from any epoll data structures holding it with POLLFREE.
+	 * waitqueue_active() is safe to use here because we're holding
+	 * the inner lock.
+	 */
+	if ((thread->looper & BINDER_LOOPER_STATE_POLL) &&
+	    waitqueue_active(&thread->wait)) {
+		wake_up_poll(&thread->wait, POLLHUP | POLLFREE);
+	}
+
 	if (send_reply)
 		binder_send_failed_reply(send_reply, BR_DEAD_REPLY);
 	binder_release_work(&thread->todo);
@@ -2651,6 +2664,8 @@ static unsigned int binder_poll(struct f
 		return POLLERR;
 	}
 
+	thread->looper |= BINDER_LOOPER_STATE_POLL;
+
 	wait_for_proc_work = thread->transaction_stack == NULL &&
 		list_empty(&thread->todo) && thread->return_error == BR_OK;
 

Re: [PATCH 4.9 30/47] ANDROID: binder: remove waitqueue when thread exits.

[Eric Biggers]

On Sun, Oct 06, 2019 at 07:21:17PM +0200, Greg Kroah-Hartman wrote:
> From: Martijn Coenen <maco@android.com>
> 
> commit f5cb779ba16334b45ba8946d6bfa6d9834d1527f upstream.
> 
> binder_poll() passes the thread->wait waitqueue that
> can be slept on for work. When a thread that uses
> epoll explicitly exits using BINDER_THREAD_EXIT,
> the waitqueue is freed, but it is never removed
> from the corresponding epoll data structure. When
> the process subsequently exits, the epoll cleanup
> code tries to access the waitlist, which results in
> a use-after-free.
> 
> Prevent this by using POLLFREE when the thread exits.
> 
> Signed-off-by: Martijn Coenen <maco@android.com>
> Reported-by: syzbot <syzkaller@googlegroups.com>
> Cc: stable <stable@vger.kernel.org> # 4.14
> [backport BINDER_LOOPER_STATE_POLL logic as well]
> Signed-off-by: Mattias Nissler <mnissler@chromium.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/android/binder.c |   17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> --- a/drivers/android/binder.c
> +++ b/drivers/android/binder.c
> @@ -334,7 +334,8 @@ enum {
>  	BINDER_LOOPER_STATE_EXITED      = 0x04,
>  	BINDER_LOOPER_STATE_INVALID     = 0x08,
>  	BINDER_LOOPER_STATE_WAITING     = 0x10,
> -	BINDER_LOOPER_STATE_NEED_RETURN = 0x20
> +	BINDER_LOOPER_STATE_NEED_RETURN = 0x20,
> +	BINDER_LOOPER_STATE_POLL	= 0x40,
>  };
>  
>  struct binder_thread {
> @@ -2628,6 +2629,18 @@ static int binder_free_thread(struct bin
>  		} else
>  			BUG();
>  	}
> +
> +	/*
> +	 * If this thread used poll, make sure we remove the waitqueue
> +	 * from any epoll data structures holding it with POLLFREE.
> +	 * waitqueue_active() is safe to use here because we're holding
> +	 * the inner lock.
> +	 */
> +	if ((thread->looper & BINDER_LOOPER_STATE_POLL) &&
> +	    waitqueue_active(&thread->wait)) {
> +		wake_up_poll(&thread->wait, POLLHUP | POLLFREE);
> +	}
> +
>  	if (send_reply)
>  		binder_send_failed_reply(send_reply, BR_DEAD_REPLY);
>  	binder_release_work(&thread->todo);
> @@ -2651,6 +2664,8 @@ static unsigned int binder_poll(struct f
>  		return POLLERR;
>  	}
>  
> +	thread->looper |= BINDER_LOOPER_STATE_POLL;
> +
>  	wait_for_proc_work = thread->transaction_stack == NULL &&
>  		list_empty(&thread->todo) && thread->return_error == BR_OK;
>  

Are you sure this backport is correct, given that in 4.9, binder_poll()
sometimes uses proc->wait instead of thread->wait?:

        wait_for_proc_work = thread->transaction_stack == NULL &&
                list_empty(&thread->todo) && thread->return_error == BR_OK;

        binder_unlock(__func__);

        if (wait_for_proc_work) {
                if (binder_has_proc_work(proc, thread))
                        return POLLIN;
                poll_wait(filp, &proc->wait, wait);
                if (binder_has_proc_work(proc, thread))
                        return POLLIN;
        } else {
                if (binder_has_thread_work(thread))
                        return POLLIN;
                poll_wait(filp, &thread->wait, wait);
                if (binder_has_thread_work(thread))
                        return POLLIN;
        }
        return 0;

Re: [PATCH 4.9 30/47] ANDROID: binder: remove waitqueue when thread exits.

[Greg Kroah-Hartman]

On Sun, Oct 06, 2019 at 10:32:02AM -0700, Eric Biggers wrote:
> On Sun, Oct 06, 2019 at 07:21:17PM +0200, Greg Kroah-Hartman wrote:
> > From: Martijn Coenen <maco@android.com>
> > 
> > commit f5cb779ba16334b45ba8946d6bfa6d9834d1527f upstream.
> > 
> > binder_poll() passes the thread->wait waitqueue that
> > can be slept on for work. When a thread that uses
> > epoll explicitly exits using BINDER_THREAD_EXIT,
> > the waitqueue is freed, but it is never removed
> > from the corresponding epoll data structure. When
> > the process subsequently exits, the epoll cleanup
> > code tries to access the waitlist, which results in
> > a use-after-free.
> > 
> > Prevent this by using POLLFREE when the thread exits.
> > 
> > Signed-off-by: Martijn Coenen <maco@android.com>
> > Reported-by: syzbot <syzkaller@googlegroups.com>
> > Cc: stable <stable@vger.kernel.org> # 4.14
> > [backport BINDER_LOOPER_STATE_POLL logic as well]
> > Signed-off-by: Mattias Nissler <mnissler@chromium.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> >  drivers/android/binder.c |   17 ++++++++++++++++-
> >  1 file changed, 16 insertions(+), 1 deletion(-)
> > 
> > --- a/drivers/android/binder.c
> > +++ b/drivers/android/binder.c
> > @@ -334,7 +334,8 @@ enum {
> >  	BINDER_LOOPER_STATE_EXITED      = 0x04,
> >  	BINDER_LOOPER_STATE_INVALID     = 0x08,
> >  	BINDER_LOOPER_STATE_WAITING     = 0x10,
> > -	BINDER_LOOPER_STATE_NEED_RETURN = 0x20
> > +	BINDER_LOOPER_STATE_NEED_RETURN = 0x20,
> > +	BINDER_LOOPER_STATE_POLL	= 0x40,
> >  };
> >  
> >  struct binder_thread {
> > @@ -2628,6 +2629,18 @@ static int binder_free_thread(struct bin
> >  		} else
> >  			BUG();
> >  	}
> > +
> > +	/*
> > +	 * If this thread used poll, make sure we remove the waitqueue
> > +	 * from any epoll data structures holding it with POLLFREE.
> > +	 * waitqueue_active() is safe to use here because we're holding
> > +	 * the inner lock.
> > +	 */
> > +	if ((thread->looper & BINDER_LOOPER_STATE_POLL) &&
> > +	    waitqueue_active(&thread->wait)) {
> > +		wake_up_poll(&thread->wait, POLLHUP | POLLFREE);
> > +	}
> > +
> >  	if (send_reply)
> >  		binder_send_failed_reply(send_reply, BR_DEAD_REPLY);
> >  	binder_release_work(&thread->todo);
> > @@ -2651,6 +2664,8 @@ static unsigned int binder_poll(struct f
> >  		return POLLERR;
> >  	}
> >  
> > +	thread->looper |= BINDER_LOOPER_STATE_POLL;
> > +
> >  	wait_for_proc_work = thread->transaction_stack == NULL &&
> >  		list_empty(&thread->todo) && thread->return_error == BR_OK;
> >  
> 
> Are you sure this backport is correct, given that in 4.9, binder_poll()
> sometimes uses proc->wait instead of thread->wait?:
> 
>         wait_for_proc_work = thread->transaction_stack == NULL &&
>                 list_empty(&thread->todo) && thread->return_error == BR_OK;
> 
>         binder_unlock(__func__);
> 
>         if (wait_for_proc_work) {
>                 if (binder_has_proc_work(proc, thread))
>                         return POLLIN;
>                 poll_wait(filp, &proc->wait, wait);
>                 if (binder_has_proc_work(proc, thread))
>                         return POLLIN;
>         } else {
>                 if (binder_has_thread_work(thread))
>                         return POLLIN;
>                 poll_wait(filp, &thread->wait, wait);
>                 if (binder_has_thread_work(thread))
>                         return POLLIN;
>         }
>         return 0;

I _think_ the backport is correct, and I know someone has verified that
the 4.4.y backport works properly and I don't see much difference here
from that version.

But I will defer to Todd and Martijn here, as they know this code _WAY_
better than I do.  The codebase has changed a lot from 4.9.y to 4.14.y
so it makes it hard to do equal comparisons simply.

Todd and Martijn, thoughts?

thanks,

greg k-h

Re: [PATCH 4.9 30/47] ANDROID: binder: remove waitqueue when thread exits.

[Mattias Nissler]

(resend, apologies for accidental HTML reply)

On Sun, Oct 6, 2019 at 11:24 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Sun, Oct 06, 2019 at 10:32:02AM -0700, Eric Biggers wrote:
> > On Sun, Oct 06, 2019 at 07:21:17PM +0200, Greg Kroah-Hartman wrote:
> > > From: Martijn Coenen <maco@android.com>
> > >
> > > commit f5cb779ba16334b45ba8946d6bfa6d9834d1527f upstream.
> > >
> > > binder_poll() passes the thread->wait waitqueue that
> > > can be slept on for work. When a thread that uses
> > > epoll explicitly exits using BINDER_THREAD_EXIT,
> > > the waitqueue is freed, but it is never removed
> > > from the corresponding epoll data structure. When
> > > the process subsequently exits, the epoll cleanup
> > > code tries to access the waitlist, which results in
> > > a use-after-free.
> > >
> > > Prevent this by using POLLFREE when the thread exits.
> > >
> > > Signed-off-by: Martijn Coenen <maco@android.com>
> > > Reported-by: syzbot <syzkaller@googlegroups.com>
> > > Cc: stable <stable@vger.kernel.org> # 4.14
> > > [backport BINDER_LOOPER_STATE_POLL logic as well]
> > > Signed-off-by: Mattias Nissler <mnissler@chromium.org>
> > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > ---
> > >  drivers/android/binder.c |   17 ++++++++++++++++-
> > >  1 file changed, 16 insertions(+), 1 deletion(-)
> > >
> > > --- a/drivers/android/binder.c
> > > +++ b/drivers/android/binder.c
> > > @@ -334,7 +334,8 @@ enum {
> > >     BINDER_LOOPER_STATE_EXITED      = 0x04,
> > >     BINDER_LOOPER_STATE_INVALID     = 0x08,
> > >     BINDER_LOOPER_STATE_WAITING     = 0x10,
> > > -   BINDER_LOOPER_STATE_NEED_RETURN = 0x20
> > > +   BINDER_LOOPER_STATE_NEED_RETURN = 0x20,
> > > +   BINDER_LOOPER_STATE_POLL        = 0x40,
> > >  };
> > >
> > >  struct binder_thread {
> > > @@ -2628,6 +2629,18 @@ static int binder_free_thread(struct bin
> > >             } else
> > >                     BUG();
> > >     }
> > > +
> > > +   /*
> > > +    * If this thread used poll, make sure we remove the waitqueue
> > > +    * from any epoll data structures holding it with POLLFREE.
> > > +    * waitqueue_active() is safe to use here because we're holding
> > > +    * the inner lock.
> > > +    */
> > > +   if ((thread->looper & BINDER_LOOPER_STATE_POLL) &&
> > > +       waitqueue_active(&thread->wait)) {
> > > +           wake_up_poll(&thread->wait, POLLHUP | POLLFREE);
> > > +   }
> > > +
> > >     if (send_reply)
> > >             binder_send_failed_reply(send_reply, BR_DEAD_REPLY);
> > >     binder_release_work(&thread->todo);
> > > @@ -2651,6 +2664,8 @@ static unsigned int binder_poll(struct f
> > >             return POLLERR;
> > >     }
> > >
> > > +   thread->looper |= BINDER_LOOPER_STATE_POLL;
> > > +
> > >     wait_for_proc_work = thread->transaction_stack == NULL &&
> > >             list_empty(&thread->todo) && thread->return_error == BR_OK;
> > >
> >
> > Are you sure this backport is correct, given that in 4.9, binder_poll()
> > sometimes uses proc->wait instead of thread->wait?:

Jann's PoC calls the BINDER_THREAD_EXIT ioctl to free the
binder_thread which will then cause the UAF, and this is cut off by
the patch. IIUC, you are worried about a similar AUF on the proc->wait
access. I am not 100% sure, but I think the binder_proc lifetime
matches the corresponding struct file instance, so it shouldn't be
possible to get the binder_proc deallocated while still being able to
access it via filp->private_data.

> >
> >         wait_for_proc_work = thread->transaction_stack == NULL &&
> >                 list_empty(&thread->todo) && thread->return_error == BR_OK;
> >
> >         binder_unlock(__func__);
> >
> >         if (wait_for_proc_work) {
> >                 if (binder_has_proc_work(proc, thread))
> >                         return POLLIN;
> >                 poll_wait(filp, &proc->wait, wait);
> >                 if (binder_has_proc_work(proc, thread))
> >                         return POLLIN;
> >         } else {
> >                 if (binder_has_thread_work(thread))
> >                         return POLLIN;
> >                 poll_wait(filp, &thread->wait, wait);
> >                 if (binder_has_thread_work(thread))
> >                         return POLLIN;
> >         }
> >         return 0;
>
> I _think_ the backport is correct, and I know someone has verified that
> the 4.4.y backport works properly and I don't see much difference here
> from that version.
>
> But I will defer to Todd and Martijn here, as they know this code _WAY_
> better than I do.  The codebase has changed a lot from 4.9.y to 4.14.y
> so it makes it hard to do equal comparisons simply.
>
> Todd and Martijn, thoughts?
>
> thanks,
>
> greg k-h

Re: [PATCH 4.9 30/47] ANDROID: binder: remove waitqueue when thread exits.

[Martijn Coenen]

On Mon, Oct 7, 2019 at 8:28 AM Mattias Nissler <mnissler@chromium.org> wrote:
> Jann's PoC calls the BINDER_THREAD_EXIT ioctl to free the
> binder_thread which will then cause the UAF, and this is cut off by
> the patch. IIUC, you are worried about a similar AUF on the proc->wait
> access. I am not 100% sure, but I think the binder_proc lifetime
> matches the corresponding struct file instance, so it shouldn't be
> possible to get the binder_proc deallocated while still being able to
> access it via filp->private_data.

Yes, I think this is correct; either the binder fd is closed first, in
which case eventpoll_release() removes the waitqueue from the list
before it is freed (before binder's release() is called); instead if
the epoll fd is closed first, it will likewise remove the waitqueue
itself, before binder_proc can be freed.. I don't know the __fput()
code that well, but at first glance it seems these two can't overlap.

The whole problem with BINDER_THREAD_EXIT was that the returned
waitqueue wasn't tied to the lifetime of the underlying file.

Apologies for not spotting this needed a backport BTW - I refactored
the wait code heavily somewhere between 4.9 and 4.14, and somehow
didn't realize the same problem existed in the old code.

Thanks,
Martijn

>
> > >
> > >         wait_for_proc_work = thread->transaction_stack == NULL &&
> > >                 list_empty(&thread->todo) && thread->return_error == BR_OK;
> > >
> > >         binder_unlock(__func__);
> > >
> > >         if (wait_for_proc_work) {
> > >                 if (binder_has_proc_work(proc, thread))
> > >                         return POLLIN;
> > >                 poll_wait(filp, &proc->wait, wait);
> > >                 if (binder_has_proc_work(proc, thread))
> > >                         return POLLIN;
> > >         } else {
> > >                 if (binder_has_thread_work(thread))
> > >                         return POLLIN;
> > >                 poll_wait(filp, &thread->wait, wait);
> > >                 if (binder_has_thread_work(thread))
> > >                         return POLLIN;
> > >         }
> > >         return 0;
> >
> > I _think_ the backport is correct, and I know someone has verified that
> > the 4.4.y backport works properly and I don't see much difference here
> > from that version.
> >
> > But I will defer to Todd and Martijn here, as they know this code _WAY_
> > better than I do.  The codebase has changed a lot from 4.9.y to 4.14.y
> > so it makes it hard to do equal comparisons simply.
> >
> > Todd and Martijn, thoughts?
> >
> > thanks,
> >
> > greg k-h

Re: [PATCH 4.9 30/47] ANDROID: binder: remove waitqueue when thread exits.

[Martijn Coenen]

On Sun, Oct 6, 2019 at 7:23 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> From: Martijn Coenen <maco@android.com>
>
> commit f5cb779ba16334b45ba8946d6bfa6d9834d1527f upstream.
>
> binder_poll() passes the thread->wait waitqueue that
> can be slept on for work. When a thread that uses
> epoll explicitly exits using BINDER_THREAD_EXIT,
> the waitqueue is freed, but it is never removed
> from the corresponding epoll data structure. When
> the process subsequently exits, the epoll cleanup
> code tries to access the waitlist, which results in
> a use-after-free.
>
> Prevent this by using POLLFREE when the thread exits.
>
> Signed-off-by: Martijn Coenen <maco@android.com>
> Reported-by: syzbot <syzkaller@googlegroups.com>
> Cc: stable <stable@vger.kernel.org> # 4.14
> [backport BINDER_LOOPER_STATE_POLL logic as well]
> Signed-off-by: Mattias Nissler <mnissler@chromium.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/android/binder.c |   17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
>
> --- a/drivers/android/binder.c
> +++ b/drivers/android/binder.c
> @@ -334,7 +334,8 @@ enum {
>         BINDER_LOOPER_STATE_EXITED      = 0x04,
>         BINDER_LOOPER_STATE_INVALID     = 0x08,
>         BINDER_LOOPER_STATE_WAITING     = 0x10,
> -       BINDER_LOOPER_STATE_NEED_RETURN = 0x20
> +       BINDER_LOOPER_STATE_NEED_RETURN = 0x20,
> +       BINDER_LOOPER_STATE_POLL        = 0x40,
>  };
>
>  struct binder_thread {
> @@ -2628,6 +2629,18 @@ static int binder_free_thread(struct bin
>                 } else
>                         BUG();
>         }
> +
> +       /*
> +        * If this thread used poll, make sure we remove the waitqueue
> +        * from any epoll data structures holding it with POLLFREE.
> +        * waitqueue_active() is safe to use here because we're holding
> +        * the inner lock.

This should be "global lock" in 4.9 and 4.4 :)

Otherwise LGTM, thanks!

Martijn

> +        */
> +       if ((thread->looper & BINDER_LOOPER_STATE_POLL) &&
> +           waitqueue_active(&thread->wait)) {
> +               wake_up_poll(&thread->wait, POLLHUP | POLLFREE);
> +       }
> +
>         if (send_reply)
>                 binder_send_failed_reply(send_reply, BR_DEAD_REPLY);
>         binder_release_work(&thread->todo);
> @@ -2651,6 +2664,8 @@ static unsigned int binder_poll(struct f
>                 return POLLERR;
>         }
>
> +       thread->looper |= BINDER_LOOPER_STATE_POLL;
> +
>         wait_for_proc_work = thread->transaction_stack == NULL &&
>                 list_empty(&thread->todo) && thread->return_error == BR_OK;
>
>
>

Re: [PATCH 4.9 30/47] ANDROID: binder: remove waitqueue when thread exits.

[Greg Kroah-Hartman]

On Mon, Oct 07, 2019 at 11:33:53AM +0200, Martijn Coenen wrote:
> On Sun, Oct 6, 2019 at 7:23 PM Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > From: Martijn Coenen <maco@android.com>
> >
> > commit f5cb779ba16334b45ba8946d6bfa6d9834d1527f upstream.
> >
> > binder_poll() passes the thread->wait waitqueue that
> > can be slept on for work. When a thread that uses
> > epoll explicitly exits using BINDER_THREAD_EXIT,
> > the waitqueue is freed, but it is never removed
> > from the corresponding epoll data structure. When
> > the process subsequently exits, the epoll cleanup
> > code tries to access the waitlist, which results in
> > a use-after-free.
> >
> > Prevent this by using POLLFREE when the thread exits.
> >
> > Signed-off-by: Martijn Coenen <maco@android.com>
> > Reported-by: syzbot <syzkaller@googlegroups.com>
> > Cc: stable <stable@vger.kernel.org> # 4.14
> > [backport BINDER_LOOPER_STATE_POLL logic as well]
> > Signed-off-by: Mattias Nissler <mnissler@chromium.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> >  drivers/android/binder.c |   17 ++++++++++++++++-
> >  1 file changed, 16 insertions(+), 1 deletion(-)
> >
> > --- a/drivers/android/binder.c
> > +++ b/drivers/android/binder.c
> > @@ -334,7 +334,8 @@ enum {
> >         BINDER_LOOPER_STATE_EXITED      = 0x04,
> >         BINDER_LOOPER_STATE_INVALID     = 0x08,
> >         BINDER_LOOPER_STATE_WAITING     = 0x10,
> > -       BINDER_LOOPER_STATE_NEED_RETURN = 0x20
> > +       BINDER_LOOPER_STATE_NEED_RETURN = 0x20,
> > +       BINDER_LOOPER_STATE_POLL        = 0x40,
> >  };
> >
> >  struct binder_thread {
> > @@ -2628,6 +2629,18 @@ static int binder_free_thread(struct bin
> >                 } else
> >                         BUG();
> >         }
> > +
> > +       /*
> > +        * If this thread used poll, make sure we remove the waitqueue
> > +        * from any epoll data structures holding it with POLLFREE.
> > +        * waitqueue_active() is safe to use here because we're holding
> > +        * the inner lock.
> 
> This should be "global lock" in 4.9 and 4.4 :)

I'll go update the comment now, thanks!

> Otherwise LGTM, thanks!

thanks for the review.

greg k-h

[PATCH 4.9 31/47] ANDROID: binder: synchronize_rcu() when using POLLFREE.

[Greg Kroah-Hartman]

From: Martijn Coenen <maco@android.com>

commit 5eeb2ca02a2f6084fc57ae5c244a38baab07033a upstream.

To prevent races with ep_remove_waitqueue() removing the
waitqueue at the same time.

Reported-by: syzbot+a2a3c4909716e271487e@syzkaller.appspotmail.com
Signed-off-by: Martijn Coenen <maco@android.com>
Cc: stable <stable@vger.kernel.org> # 4.14+
Signed-off-by: Mattias Nissler <mnissler@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2641,6 +2641,15 @@ static int binder_free_thread(struct bin
 		wake_up_poll(&thread->wait, POLLHUP | POLLFREE);
 	}
 
+	/*
+	 * This is needed to avoid races between wake_up_poll() above and
+	 * and ep_remove_waitqueue() called for other reasons (eg the epoll file
+	 * descriptor being closed); ep_remove_waitqueue() holds an RCU read
+	 * lock, so we can be sure it's done after calling synchronize_rcu().
+	 */
+	if (thread->looper & BINDER_LOOPER_STATE_POLL)
+		synchronize_rcu();
+
 	if (send_reply)
 		binder_send_failed_reply(send_reply, BR_DEAD_REPLY);
 	binder_release_work(&thread->todo);

[PATCH 4.9 32/47] cxgb4:Fix out-of-bounds MSI-X info array access

[Greg Kroah-Hartman]

From: Vishal Kulkarni <vishal@chelsio.com>

[ Upstream commit 6b517374f4ea5a3c6e307e1219ec5f35d42e6d00 ]

When fetching free MSI-X vectors for ULDs, check for the error code
before accessing MSI-X info array. Otherwise, an out-of-bounds access is
attempted, which results in kernel panic.

Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c
@@ -137,13 +137,12 @@ static int uldrx_handler(struct sge_rspq
 static int alloc_uld_rxqs(struct adapter *adap,
 			  struct sge_uld_rxq_info *rxq_info, bool lro)
 {
-	struct sge *s = &adap->sge;
 	unsigned int nq = rxq_info->nrxq + rxq_info->nciq;
+	int i, err, msi_idx, que_idx = 0, bmap_idx = 0;
 	struct sge_ofld_rxq *q = rxq_info->uldrxq;
 	unsigned short *ids = rxq_info->rspq_id;
-	unsigned int bmap_idx = 0;
+	struct sge *s = &adap->sge;
 	unsigned int per_chan;
-	int i, err, msi_idx, que_idx = 0;
 
 	per_chan = rxq_info->nrxq / adap->params.nports;
 
@@ -161,6 +160,10 @@ static int alloc_uld_rxqs(struct adapter
 
 		if (msi_idx >= 0) {
 			bmap_idx = get_msix_idx_from_bmap(adap);
+			if (bmap_idx < 0) {
+				err = -ENOSPC;
+				goto freeout;
+			}
 			msi_idx = adap->msix_info_ulds[bmap_idx].idx;
 		}
 		err = t4_sge_alloc_rxq(adap, &q->rspq, false,

[PATCH 4.9 33/47] hso: fix NULL-deref on tty open

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit 8353da9fa69722b54cba82b2ec740afd3d438748 ]

Fix NULL-pointer dereference on tty open due to a failure to handle a
missing interrupt-in endpoint when probing modem ports:

	BUG: kernel NULL pointer dereference, address: 0000000000000006
	...
	RIP: 0010:tiocmget_submit_urb+0x1c/0xe0 [hso]
	...
	Call Trace:
	hso_start_serial_device+0xdc/0x140 [hso]
	hso_serial_open+0x118/0x1b0 [hso]
	tty_open+0xf1/0x490

Fixes: 542f54823614 ("tty: Modem functions for the HSO driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/hso.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2635,14 +2635,18 @@ static struct hso_device *hso_create_bul
 		 */
 		if (serial->tiocmget) {
 			tiocmget = serial->tiocmget;
+			tiocmget->endp = hso_get_ep(interface,
+						    USB_ENDPOINT_XFER_INT,
+						    USB_DIR_IN);
+			if (!tiocmget->endp) {
+				dev_err(&interface->dev, "Failed to find INT IN ep\n");
+				goto exit;
+			}
+
 			tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
 			if (tiocmget->urb) {
 				mutex_init(&tiocmget->mutex);
 				init_waitqueue_head(&tiocmget->waitq);
-				tiocmget->endp = hso_get_ep(
-					interface,
-					USB_ENDPOINT_XFER_INT,
-					USB_DIR_IN);
 			} else
 				hso_free_tiomget(serial);
 		}

[PATCH 4.9 34/47] ipv6: drop incoming packets having a v4mapped source address

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 6af1799aaf3f1bc8defedddfa00df3192445bbf3 ]

This began with a syzbot report. syzkaller was injecting
IPv6 TCP SYN packets having a v4mapped source address.

After an unsuccessful 4-tuple lookup, TCP creates a request
socket (SYN_RECV) and calls reqsk_queue_hash_req()

reqsk_queue_hash_req() calls sk_ehashfn(sk)

At this point we have AF_INET6 sockets, and the heuristic
used by sk_ehashfn() to either hash the IPv4 or IPv6 addresses
is to use ipv6_addr_v4mapped(&sk->sk_v6_daddr)

For the particular spoofed packet, we end up hashing V4 addresses
which were not initialized by the TCP IPv6 stack, so KMSAN fired
a warning.

I first fixed sk_ehashfn() to test both source and destination addresses,
but then faced various problems, including user-space programs
like packetdrill that had similar assumptions.

Instead of trying to fix the whole ecosystem, it is better
to admit that we have a dual stack behavior, and that we
can not build linux kernels without V4 stack anyway.

The dual stack API automatically forces the traffic to be IPv4
if v4mapped addresses are used at bind() or connect(), so it makes
no sense to allow IPv6 traffic to use the same v4mapped class.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_input.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -168,6 +168,16 @@ int ipv6_rcv(struct sk_buff *skb, struct
 	if (ipv6_addr_is_multicast(&hdr->saddr))
 		goto err;
 
+	/* While RFC4291 is not explicit about v4mapped addresses
+	 * in IPv6 headers, it seems clear linux dual-stack
+	 * model can not deal properly with these.
+	 * Security models could be fooled by ::ffff:127.0.0.1 for example.
+	 *
+	 * https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02
+	 */
+	if (ipv6_addr_v4mapped(&hdr->saddr))
+		goto err;
+
 	skb->transport_header = skb->network_header + sizeof(*hdr);
 	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
 

[PATCH 4.9 35/47] net: ipv4: avoid mixed n_redirects and rate_tokens usage

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit b406472b5ad79ede8d10077f0c8f05505ace8b6d ]

Since commit c09551c6ff7f ("net: ipv4: use a dedicated counter
for icmp_v4 redirect packets") we use 'n_redirects' to account
for redirect packets, but we still use 'rate_tokens' to compute
the redirect packets exponential backoff.

If the device sent to the relevant peer any ICMP error packet
after sending a redirect, it will also update 'rate_token' according
to the leaking bucket schema; typically 'rate_token' will raise
above BITS_PER_LONG and the redirect packets backoff algorithm
will produce undefined behavior.

Fix the issue using 'n_redirects' to compute the exponential backoff
in ip_rt_send_redirect().

Note that we still clear rate_tokens after a redirect silence period,
to avoid changing an established behaviour.

The root cause predates git history; before the mentioned commit in
the critical scenario, the kernel stopped sending redirects, after
the mentioned commit the behavior more randomic.

Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: c09551c6ff7f ("net: ipv4: use a dedicated counter for icmp_v4 redirect packets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/route.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -903,16 +903,15 @@ void ip_rt_send_redirect(struct sk_buff
 	if (peer->rate_tokens == 0 ||
 	    time_after(jiffies,
 		       (peer->rate_last +
-			(ip_rt_redirect_load << peer->rate_tokens)))) {
+			(ip_rt_redirect_load << peer->n_redirects)))) {
 		__be32 gw = rt_nexthop(rt, ip_hdr(skb)->daddr);
 
 		icmp_send(skb, ICMP_REDIRECT, ICMP_REDIR_HOST, gw);
 		peer->rate_last = jiffies;
-		++peer->rate_tokens;
 		++peer->n_redirects;
 #ifdef CONFIG_IP_ROUTE_VERBOSE
 		if (log_martians &&
-		    peer->rate_tokens == ip_rt_redirect_number)
+		    peer->n_redirects == ip_rt_redirect_number)
 			net_warn_ratelimited("host %pI4/if%d ignores redirects for %pI4 to %pI4\n",
 					     &ip_hdr(skb)->saddr, inet_iif(skb),
 					     &ip_hdr(skb)->daddr, &gw);

[PATCH 4.9 36/47] net: qlogic: Fix memory leak in ql_alloc_large_buffers

[Greg Kroah-Hartman]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 1acb8f2a7a9f10543868ddd737e37424d5c36cf4 ]

In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb.
This skb should be released if pci_dma_mapping_error fails.

Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qla3xxx.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -2783,6 +2783,7 @@ static int ql_alloc_large_buffers(struct
 				netdev_err(qdev->ndev,
 					   "PCI mapping failed with error: %d\n",
 					   err);
+				dev_kfree_skb_irq(skb);
 				ql_free_large_buffers(qdev);
 				return -ENOMEM;
 			}

[PATCH 4.9 37/47] net: Unpublish sk from sk_reuseport_cb before call_rcu

[Greg Kroah-Hartman]

From: Martin KaFai Lau <kafai@fb.com>

[ Upstream commit 8c7138b33e5c690c308b2a7085f6313fdcb3f616 ]

The "reuse->sock[]" array is shared by multiple sockets.  The going away
sk must unpublish itself from "reuse->sock[]" before making call_rcu()
call.  However, this unpublish-action is currently done after a grace
period and it may cause use-after-free.

The fix is to move reuseport_detach_sock() to sk_destruct().
Due to the above reason, any socket with sk_reuseport_cb has
to go through the rcu grace period before freeing it.

It is a rather old bug (~3 yrs).  The Fixes tag is not necessary
the right commit but it is the one that introduced the SOCK_RCU_FREE
logic and this fix is depending on it.

Fixes: a4298e4522d6 ("net: add SOCK_RCU_FREE socket flag")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/sock.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1426,8 +1426,6 @@ static void __sk_destruct(struct rcu_hea
 		sk_filter_uncharge(sk, filter);
 		RCU_INIT_POINTER(sk->sk_filter, NULL);
 	}
-	if (rcu_access_pointer(sk->sk_reuseport_cb))
-		reuseport_detach_sock(sk);
 
 	sock_disable_timestamp(sk, SK_FLAGS_TIMESTAMP);
 
@@ -1450,7 +1448,14 @@ static void __sk_destruct(struct rcu_hea
 
 void sk_destruct(struct sock *sk)
 {
-	if (sock_flag(sk, SOCK_RCU_FREE))
+	bool use_call_rcu = sock_flag(sk, SOCK_RCU_FREE);
+
+	if (rcu_access_pointer(sk->sk_reuseport_cb)) {
+		reuseport_detach_sock(sk);
+		use_call_rcu = true;
+	}
+
+	if (use_call_rcu)
 		call_rcu(&sk->sk_rcu, __sk_destruct);
 	else
 		__sk_destruct(&sk->sk_rcu);

[PATCH 4.9 38/47] nfc: fix memory leak in llcp_sock_bind()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit a0c2dc1fe63e2869b74c1c7f6a81d1745c8a695d ]

sysbot reported a memory leak after a bind() has failed.

While we are at it, abort the operation if kmemdup() has failed.

BUG: memory leak
unreferenced object 0xffff888105d83ec0 (size 32):
  comm "syz-executor067", pid 7207, jiffies 4294956228 (age 19.430s)
  hex dump (first 32 bytes):
    00 69 6c 65 20 72 65 61 64 00 6e 65 74 3a 5b 34  .ile read.net:[4
    30 32 36 35 33 33 30 39 37 5d 00 00 00 00 00 00  026533097]......
  backtrace:
    [<0000000036bac473>] kmemleak_alloc_recursive /./include/linux/kmemleak.h:43 [inline]
    [<0000000036bac473>] slab_post_alloc_hook /mm/slab.h:522 [inline]
    [<0000000036bac473>] slab_alloc /mm/slab.c:3319 [inline]
    [<0000000036bac473>] __do_kmalloc /mm/slab.c:3653 [inline]
    [<0000000036bac473>] __kmalloc_track_caller+0x169/0x2d0 /mm/slab.c:3670
    [<000000000cd39d07>] kmemdup+0x27/0x60 /mm/util.c:120
    [<000000008e57e5fc>] kmemdup /./include/linux/string.h:432 [inline]
    [<000000008e57e5fc>] llcp_sock_bind+0x1b3/0x230 /net/nfc/llcp_sock.c:107
    [<000000009cb0b5d3>] __sys_bind+0x11c/0x140 /net/socket.c:1647
    [<00000000492c3bbc>] __do_sys_bind /net/socket.c:1658 [inline]
    [<00000000492c3bbc>] __se_sys_bind /net/socket.c:1656 [inline]
    [<00000000492c3bbc>] __x64_sys_bind+0x1e/0x30 /net/socket.c:1656
    [<0000000008704b2a>] do_syscall_64+0x76/0x1a0 /arch/x86/entry/common.c:296
    [<000000009f4c57a4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 30cc4587659e ("NFC: Move LLCP code to the NFC top level diirectory")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/llcp_sock.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/net/nfc/llcp_sock.c
+++ b/net/nfc/llcp_sock.c
@@ -118,9 +118,14 @@ static int llcp_sock_bind(struct socket
 	llcp_sock->service_name = kmemdup(llcp_addr.service_name,
 					  llcp_sock->service_name_len,
 					  GFP_KERNEL);
-
+	if (!llcp_sock->service_name) {
+		ret = -ENOMEM;
+		goto put_dev;
+	}
 	llcp_sock->ssap = nfc_llcp_get_sdp_ssap(local, llcp_sock);
 	if (llcp_sock->ssap == LLCP_SAP_MAX) {
+		kfree(llcp_sock->service_name);
+		llcp_sock->service_name = NULL;
 		ret = -EADDRINUSE;
 		goto put_dev;
 	}

[PATCH 4.9 39/47] qmi_wwan: add support for Cinterion CLS8 devices

[Greg Kroah-Hartman]

From: Reinhard Speyerer <rspmn@arcor.de>

[ Upstream commit cf74ac6db25d4002089e85cc623ad149ecc25614 ]

Add support for Cinterion CLS8 devices.
Use QMI_QUIRK_SET_DTR as required for Qualcomm MDM9x07 chipsets.

T:  Bus=01 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 25 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b0 Rev= 3.18
S:  Manufacturer=GEMALTO
S:  Product=USB Modem
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -940,6 +940,7 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x1e2d, 0x0082, 4)},	/* Cinterion PHxx,PXxx (2 RmNet) */
 	{QMI_FIXED_INTF(0x1e2d, 0x0082, 5)},	/* Cinterion PHxx,PXxx (2 RmNet) */
 	{QMI_FIXED_INTF(0x1e2d, 0x0083, 4)},	/* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/
+	{QMI_QUIRK_SET_DTR(0x1e2d, 0x00b0, 4)},	/* Cinterion CLS8 */
 	{QMI_FIXED_INTF(0x413c, 0x81a2, 8)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
 	{QMI_FIXED_INTF(0x413c, 0x81a3, 8)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
 	{QMI_FIXED_INTF(0x413c, 0x81a4, 8)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */

[PATCH 4.9 40/47] sch_dsmark: fix potential NULL deref in dsmark_init()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 474f0813a3002cb299bb73a5a93aa1f537a80ca8 ]

Make sure TCA_DSMARK_INDICES was provided by the user.

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8799 Comm: syz-executor235 Not tainted 5.3.0+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:nla_get_u16 include/net/netlink.h:1501 [inline]
RIP: 0010:dsmark_init net/sched/sch_dsmark.c:364 [inline]
RIP: 0010:dsmark_init+0x193/0x640 net/sched/sch_dsmark.c:339
Code: 85 db 58 0f 88 7d 03 00 00 e8 e9 1a ac fb 48 8b 9d 70 ff ff ff 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 ca
RSP: 0018:ffff88809426f3b8 EFLAGS: 00010247
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff85c6eb09
RDX: 0000000000000000 RSI: ffffffff85c6eb17 RDI: 0000000000000004
RBP: ffff88809426f4b0 R08: ffff88808c4085c0 R09: ffffed1015d26159
R10: ffffed1015d26158 R11: ffff8880ae930ac7 R12: ffff8880a7e96940
R13: dffffc0000000000 R14: ffff88809426f8c0 R15: 0000000000000000
FS:  0000000001292880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 000000008ca1b000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 qdisc_create+0x4ee/0x1210 net/sched/sch_api.c:1237
 tc_modify_qdisc+0x524/0x1c50 net/sched/sch_api.c:1653
 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5223
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5241
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x803/0x920 net/socket.c:2311
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356
 __do_sys_sendmsg net/socket.c:2365 [inline]
 __se_sys_sendmsg net/socket.c:2363 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440369

Fixes: 758cc43c6d73 ("[PKT_SCHED]: Fix dsmark to apply changes consistent")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_dsmark.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -346,6 +346,8 @@ static int dsmark_init(struct Qdisc *sch
 		goto errout;
 
 	err = -EINVAL;
+	if (!tb[TCA_DSMARK_INDICES])
+		goto errout;
 	indices = nla_get_u16(tb[TCA_DSMARK_INDICES]);
 
 	if (hweight32(indices) != 1)

[PATCH 4.9 41/47] net/rds: Fix error handling in rds_ib_add_one()

[Greg Kroah-Hartman]

From: Dotan Barak <dotanb@dev.mellanox.co.il>

[ Upstream commit d64bf89a75b65f83f06be9fb8f978e60d53752db ]

rds_ibdev:ipaddr_list and rds_ibdev:conn_list are initialized
after allocation some resources such as protection domain.
If allocation of such resources fail, then these uninitialized
variables are accessed in rds_ib_dev_free() in failure path. This
can potentially crash the system. The code has been updated to
initialize these variables very early in the function.

Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il>
Signed-off-by: Sudhakar Dindukurti <sudhakar.dindukurti@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rds/ib.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/net/rds/ib.c
+++ b/net/rds/ib.c
@@ -138,6 +138,9 @@ static void rds_ib_add_one(struct ib_dev
 	atomic_set(&rds_ibdev->refcount, 1);
 	INIT_WORK(&rds_ibdev->free_work, rds_ib_dev_free);
 
+	INIT_LIST_HEAD(&rds_ibdev->ipaddr_list);
+	INIT_LIST_HEAD(&rds_ibdev->conn_list);
+
 	rds_ibdev->max_wrs = device->attrs.max_qp_wr;
 	rds_ibdev->max_sge = min(device->attrs.max_sge, RDS_IB_MAX_SGE);
 
@@ -189,9 +192,6 @@ static void rds_ib_add_one(struct ib_dev
 		device->name,
 		rds_ibdev->use_fastreg ? "FRMR" : "FMR");
 
-	INIT_LIST_HEAD(&rds_ibdev->ipaddr_list);
-	INIT_LIST_HEAD(&rds_ibdev->conn_list);
-
 	down_write(&rds_ib_devices_lock);
 	list_add_tail_rcu(&rds_ibdev->list, &rds_ib_devices);
 	up_write(&rds_ib_devices_lock);

[PATCH 4.9 42/47] xen-netfront: do not use ~0U as error return value for xennet_fill_frags()

[Greg Kroah-Hartman]

From: Dongli Zhang <dongli.zhang@oracle.com>

[ Upstream commit a761129e3625688310aecf26e1be9e98e85f8eb5 ]

xennet_fill_frags() uses ~0U as return value when the sk_buff is not able
to cache extra fragments. This is incorrect because the return type of
xennet_fill_frags() is RING_IDX and 0xffffffff is an expected value for
ring buffer index.

In the situation when the rsp_cons is approaching 0xffffffff, the return
value of xennet_fill_frags() may become 0xffffffff which xennet_poll() (the
caller) would regard as error. As a result, queue->rx.rsp_cons is set
incorrectly because it is updated only when there is error. If there is no
error, xennet_poll() would be responsible to update queue->rx.rsp_cons.
Finally, queue->rx.rsp_cons would point to the rx ring buffer entries whose
queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL.
This leads to NULL pointer access in the next iteration to process rx ring
buffer entries.

The symptom is similar to the one fixed in
commit 00b368502d18 ("xen-netfront: do not assume sk_buff_head list is
empty in error handling").

This patch changes the return type of xennet_fill_frags() to indicate
whether it is successful or failed. The queue->rx.rsp_cons will be
always updated inside this function.

Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netfront.c |   17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -888,9 +888,9 @@ static int xennet_set_skb_gso(struct sk_
 	return 0;
 }
 
-static RING_IDX xennet_fill_frags(struct netfront_queue *queue,
-				  struct sk_buff *skb,
-				  struct sk_buff_head *list)
+static int xennet_fill_frags(struct netfront_queue *queue,
+			     struct sk_buff *skb,
+			     struct sk_buff_head *list)
 {
 	RING_IDX cons = queue->rx.rsp_cons;
 	struct sk_buff *nskb;
@@ -909,7 +909,7 @@ static RING_IDX xennet_fill_frags(struct
 		if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {
 			queue->rx.rsp_cons = ++cons + skb_queue_len(list);
 			kfree_skb(nskb);
-			return ~0U;
+			return -ENOENT;
 		}
 
 		skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
@@ -920,7 +920,9 @@ static RING_IDX xennet_fill_frags(struct
 		kfree_skb(nskb);
 	}
 
-	return cons;
+	queue->rx.rsp_cons = cons;
+
+	return 0;
 }
 
 static int checksum_setup(struct net_device *dev, struct sk_buff *skb)
@@ -1046,8 +1048,7 @@ err:
 		skb->data_len = rx->status;
 		skb->len += rx->status;
 
-		i = xennet_fill_frags(queue, skb, &tmpq);
-		if (unlikely(i == ~0U))
+		if (unlikely(xennet_fill_frags(queue, skb, &tmpq)))
 			goto err;
 
 		if (rx->flags & XEN_NETRXF_csum_blank)
@@ -1057,7 +1058,7 @@ err:
 
 		__skb_queue_tail(&rxq, skb);
 
-		queue->rx.rsp_cons = ++i;
+		i = ++queue->rx.rsp_cons;
 		work_done++;
 	}
 

[PATCH 4.9 43/47] sch_cbq: validate TCA_CBQ_WRROPT to avoid crash

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit e9789c7cc182484fc031fd88097eb14cb26c4596 ]

syzbot reported a crash in cbq_normalize_quanta() caused
by an out of range cl->priority.

iproute2 enforces this check, but malicious users do not.

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
Modules linked in:
CPU: 1 PID: 26447 Comm: syz-executor.1 Not tainted 5.3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:cbq_normalize_quanta.part.0+0x1fd/0x430 net/sched/sch_cbq.c:902
RSP: 0018:ffff8801a5c333b0 EFLAGS: 00010206
RAX: 0000000020000003 RBX: 00000000fffffff8 RCX: ffffc9000712f000
RDX: 00000000000043bf RSI: ffffffff83be8962 RDI: 0000000100000018
RBP: ffff8801a5c33420 R08: 000000000000003a R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000002ef
R13: ffff88018da95188 R14: dffffc0000000000 R15: 0000000000000015
FS:  00007f37d26b1700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004c7cec CR3: 00000001bcd0a006 CR4: 00000000001626f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 [<ffffffff83be9d57>] cbq_normalize_quanta include/net/pkt_sched.h:27 [inline]
 [<ffffffff83be9d57>] cbq_addprio net/sched/sch_cbq.c:1097 [inline]
 [<ffffffff83be9d57>] cbq_set_wrr+0x2d7/0x450 net/sched/sch_cbq.c:1115
 [<ffffffff83bee8a7>] cbq_change_class+0x987/0x225b net/sched/sch_cbq.c:1537
 [<ffffffff83b96985>] tc_ctl_tclass+0x555/0xcd0 net/sched/sch_api.c:2329
 [<ffffffff83a84655>] rtnetlink_rcv_msg+0x485/0xc10 net/core/rtnetlink.c:5248
 [<ffffffff83cadf0a>] netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2510
 [<ffffffff83a7db6d>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5266
 [<ffffffff83cac2c6>] netlink_unicast_kernel net/netlink/af_netlink.c:1324 [inline]
 [<ffffffff83cac2c6>] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1350
 [<ffffffff83cacd4a>] netlink_sendmsg+0x89a/0xd50 net/netlink/af_netlink.c:1939
 [<ffffffff8399d46e>] sock_sendmsg_nosec net/socket.c:673 [inline]
 [<ffffffff8399d46e>] sock_sendmsg+0x12e/0x170 net/socket.c:684
 [<ffffffff8399f1fd>] ___sys_sendmsg+0x81d/0x960 net/socket.c:2359
 [<ffffffff839a2d05>] __sys_sendmsg+0x105/0x1d0 net/socket.c:2397
 [<ffffffff839a2df9>] SYSC_sendmsg net/socket.c:2406 [inline]
 [<ffffffff839a2df9>] SyS_sendmsg+0x29/0x30 net/socket.c:2404
 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305
 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_cbq.c |   27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -1129,6 +1129,26 @@ static const struct nla_policy cbq_polic
 	[TCA_CBQ_POLICE]	= { .len = sizeof(struct tc_cbq_police) },
 };
 
+static int cbq_opt_parse(struct nlattr *tb[TCA_CBQ_MAX + 1], struct nlattr *opt)
+{
+	int err;
+
+	if (!opt)
+		return -EINVAL;
+
+	err = nla_parse_nested(tb, TCA_CBQ_MAX, opt, cbq_policy);
+	if (err < 0)
+		return err;
+
+	if (tb[TCA_CBQ_WRROPT]) {
+		const struct tc_cbq_wrropt *wrr = nla_data(tb[TCA_CBQ_WRROPT]);
+
+		if (wrr->priority > TC_CBQ_MAXPRIO)
+			err = -EINVAL;
+	}
+	return err;
+}
+
 static int cbq_init(struct Qdisc *sch, struct nlattr *opt)
 {
 	struct cbq_sched_data *q = qdisc_priv(sch);
@@ -1136,7 +1156,7 @@ static int cbq_init(struct Qdisc *sch, s
 	struct tc_ratespec *r;
 	int err;
 
-	err = nla_parse_nested(tb, TCA_CBQ_MAX, opt, cbq_policy);
+	err = cbq_opt_parse(tb, opt);
 	if (err < 0)
 		return err;
 
@@ -1468,10 +1488,7 @@ cbq_change_class(struct Qdisc *sch, u32
 	struct cbq_class *parent;
 	struct qdisc_rate_table *rtab = NULL;
 
-	if (opt == NULL)
-		return -EINVAL;
-
-	err = nla_parse_nested(tb, TCA_CBQ_MAX, opt, cbq_policy);
+	err = cbq_opt_parse(tb, opt);
 	if (err < 0)
 		return err;
 

[PATCH 4.9 44/47] ipv6: Handle missing host route in __ipv6_ifa_notify

[Greg Kroah-Hartman]

From: David Ahern <dsahern@gmail.com>

[ Upstream commit 2d819d250a1393a3e725715425ab70a0e0772a71 ]

Rajendra reported a kernel panic when a link was taken down:

    [ 6870.263084] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
    [ 6870.271856] IP: [<ffffffff8efc5764>] __ipv6_ifa_notify+0x154/0x290

    <snip>

    [ 6870.570501] Call Trace:
    [ 6870.573238] [<ffffffff8efc58c6>] ? ipv6_ifa_notify+0x26/0x40
    [ 6870.579665] [<ffffffff8efc98ec>] ? addrconf_dad_completed+0x4c/0x2c0
    [ 6870.586869] [<ffffffff8efe70c6>] ? ipv6_dev_mc_inc+0x196/0x260
    [ 6870.593491] [<ffffffff8efc9c6a>] ? addrconf_dad_work+0x10a/0x430
    [ 6870.600305] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
    [ 6870.606732] [<ffffffff8ea93a7a>] ? process_one_work+0x18a/0x430
    [ 6870.613449] [<ffffffff8ea93d6d>] ? worker_thread+0x4d/0x490
    [ 6870.619778] [<ffffffff8ea93d20>] ? process_one_work+0x430/0x430
    [ 6870.626495] [<ffffffff8ea99dd9>] ? kthread+0xd9/0xf0
    [ 6870.632145] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
    [ 6870.638573] [<ffffffff8ea99d00>] ? kthread_park+0x60/0x60
    [ 6870.644707] [<ffffffff8f01ae77>] ? ret_from_fork+0x57/0x70
    [ 6870.650936] Code: 31 c0 31 d2 41 b9 20 00 08 02 b9 09 00 00 0

addrconf_dad_work is kicked to be scheduled when a device is brought
up. There is a race between addrcond_dad_work getting scheduled and
taking the rtnl lock and a process taking the link down (under rtnl).
The latter removes the host route from the inet6_addr as part of
addrconf_ifdown which is run for NETDEV_DOWN. The former attempts
to use the host route in __ipv6_ifa_notify. If the down event removes
the host route due to the race to the rtnl, then the BUG listed above
occurs.

Since the DAD sequence can not be aborted, add a check for the missing
host route in __ipv6_ifa_notify. The only way this should happen is due
to the previously mentioned race. The host route is created when the
address is added to an interface; it is only removed on a down event
where the address is kept. Add a warning if the host route is missing
AND the device is up; this is a situation that should never happen.

Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional")
Reported-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/addrconf.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -5443,13 +5443,20 @@ static void __ipv6_ifa_notify(int event,
 	switch (event) {
 	case RTM_NEWADDR:
 		/*
-		 * If the address was optimistic
-		 * we inserted the route at the start of
-		 * our DAD process, so we don't need
-		 * to do it again
+		 * If the address was optimistic we inserted the route at the
+		 * start of our DAD process, so we don't need to do it again.
+		 * If the device was taken down in the middle of the DAD
+		 * cycle there is a race where we could get here without a
+		 * host route, so nothing to insert. That will be fixed when
+		 * the device is brought up.
 		 */
-		if (!rcu_access_pointer(ifp->rt->rt6i_node))
+		if (ifp->rt && !rcu_access_pointer(ifp->rt->rt6i_node)) {
 			ip6_ins_rt(ifp->rt);
+		} else if (!ifp->rt && (ifp->idev->dev->flags & IFF_UP)) {
+			pr_warn("BUG: Address %pI6c on device %s is missing its host route.\n",
+				&ifp->addr, ifp->idev->dev->name);
+		}
+
 		if (ifp->idev->cnf.forwarding)
 			addrconf_join_anycast(ifp);
 		if (!ipv6_addr_any(&ifp->peer_addr))

[PATCH 4.9 45/47] Smack: Dont ignore other bprm->unsafe flags if LSM_UNSAFE_PTRACE is set

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 3675f052b43ba51b99b85b073c7070e083f3e6fb upstream.

There is a logic bug in the current smack_bprm_set_creds():
If LSM_UNSAFE_PTRACE is set, but the ptrace state is deemed to be
acceptable (e.g. because the ptracer detached in the meantime), the other
->unsafe flags aren't checked. As far as I can tell, this means that
something like the following could work (but I haven't tested it):

 - task A: create task B with fork()
 - task B: set NO_NEW_PRIVS
 - task B: install a seccomp filter that makes open() return 0 under some
   conditions
 - task B: replace fd 0 with a malicious library
 - task A: attach to task B with PTRACE_ATTACH
 - task B: execve() a file with an SMACK64EXEC extended attribute
 - task A: while task B is still in the middle of execve(), exit (which
   destroys the ptrace relationship)

Make sure that if any flags other than LSM_UNSAFE_PTRACE are set in
bprm->unsafe, we reject the execve().

Cc: stable@vger.kernel.org
Fixes: 5663884caab1 ("Smack: unify all ptrace accesses in the smack")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/smack/smack_lsm.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -949,7 +949,8 @@ static int smack_bprm_set_creds(struct l
 
 		if (rc != 0)
 			return rc;
-	} else if (bprm->unsafe)
+	}
+	if (bprm->unsafe & ~LSM_UNSAFE_PTRACE)
 		return -EPERM;
 
 	bsp->smk_task = isp->smk_task;

Re: [PATCH 4.9 45/47] Smack: Dont ignore other bprm->unsafe flags if LSM_UNSAFE_PTRACE is set

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 702 bytes --]

On Sun, 2019-10-06 at 19:21 +0200, Greg Kroah-Hartman wrote:
> From: Jann Horn <jannh@google.com>
> 
> commit 3675f052b43ba51b99b85b073c7070e083f3e6fb upstream.
[...]
> --- a/security/smack/smack_lsm.c
> +++ b/security/smack/smack_lsm.c
> @@ -949,7 +949,8 @@ static int smack_bprm_set_creds(struct l
>  
>  		if (rc != 0)
>  			return rc;
> -	} else if (bprm->unsafe)
> +	}
> +	if (bprm->unsafe & ~LSM_UNSAFE_PTRACE)

I think this needs to be ~(LSM_UNSAFE_PTRACE | LSM_UNSAFE_PTRACE_CAP)
for 4.9 and older branches.

Ben.

>  		return -EPERM;
>  
>  	bsp->smk_task = isp->smk_task;
> 
> 
-- 
Ben Hutchings
Every program is either trivial or else contains at least one bug


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH 4.9 45/47] Smack: Dont ignore other bprm->unsafe flags if LSM_UNSAFE_PTRACE is set

[Greg Kroah-Hartman]

On Thu, Dec 05, 2019 at 03:50:07PM +0000, Ben Hutchings wrote:
> On Sun, 2019-10-06 at 19:21 +0200, Greg Kroah-Hartman wrote:
> > From: Jann Horn <jannh@google.com>
> > 
> > commit 3675f052b43ba51b99b85b073c7070e083f3e6fb upstream.
> [...]
> > --- a/security/smack/smack_lsm.c
> > +++ b/security/smack/smack_lsm.c
> > @@ -949,7 +949,8 @@ static int smack_bprm_set_creds(struct l
> >  
> >  		if (rc != 0)
> >  			return rc;
> > -	} else if (bprm->unsafe)
> > +	}
> > +	if (bprm->unsafe & ~LSM_UNSAFE_PTRACE)
> 
> I think this needs to be ~(LSM_UNSAFE_PTRACE | LSM_UNSAFE_PTRACE_CAP)
> for 4.9 and older branches.

Why?  Where did the LSM_UNSAFE_PTRACE_CAP requirement come from (or
really, go away?)

thanks,

greg k-h

Re: [PATCH 4.9 45/47] Smack: Dont ignore other bprm->unsafe flags if LSM_UNSAFE_PTRACE is set

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1444 bytes --]

On Thu, 2019-12-12 at 18:06 +0100, Greg Kroah-Hartman wrote:
> On Thu, Dec 05, 2019 at 03:50:07PM +0000, Ben Hutchings wrote:
> > On Sun, 2019-10-06 at 19:21 +0200, Greg Kroah-Hartman wrote:
> > > From: Jann Horn <jannh@google.com>
> > > 
> > > commit 3675f052b43ba51b99b85b073c7070e083f3e6fb upstream.
> > [...]
> > > --- a/security/smack/smack_lsm.c
> > > +++ b/security/smack/smack_lsm.c
> > > @@ -949,7 +949,8 @@ static int smack_bprm_set_creds(struct l
> > >  
> > >  		if (rc != 0)
> > >  			return rc;
> > > -	} else if (bprm->unsafe)
> > > +	}
> > > +	if (bprm->unsafe & ~LSM_UNSAFE_PTRACE)
> > 
> > I think this needs to be ~(LSM_UNSAFE_PTRACE | LSM_UNSAFE_PTRACE_CAP)
> > for 4.9 and older branches.
> 
> Why?  Where did the LSM_UNSAFE_PTRACE_CAP requirement come from (or
> really, go away?)

LSM_UNSAFE_PTRACE_CAP was combined with LSM_UNSAFE_PTRACE by:

commit 9227dd2a84a765fcfef1677ff17de0958b192eda
Author: Eric W. Biederman <ebiederm@xmission.com>
Date:   Mon Jan 23 17:26:31 2017 +1300

    exec: Remove LSM_UNSAFE_PTRACE_CAP

If I understand the patch ("Smack: Dont ignore other bprm->unsafe
flags …") correctly, this function should have one if-statement
handling LSM_UNSAFE_PTRACE (and LSM_UNSAFE_PTRACE_CAP if it exists),
followed by another if-statement handling all other flags in
bprm->unsafe.

Ben.

-- 
Ben Hutchings
Sturgeon's Law: Ninety percent of everything is crap.


[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH 4.9 46/47] smack: use GFP_NOFS while holding inode_smack::smk_lock

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit e5bfad3d7acc5702f32aafeb388362994f4d7bd0 upstream.

inode_smack::smk_lock is taken during smack_d_instantiate(), which is
called during a filesystem transaction when creating a file on ext4.
Therefore to avoid a deadlock, all code that takes this lock must use
GFP_NOFS, to prevent memory reclaim from waiting for the filesystem
transaction to complete.

Reported-by: syzbot+0eefc1e06a77d327a056@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/smack/smack_access.c |    4 ++--
 security/smack/smack_lsm.c    |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/security/smack/smack_access.c
+++ b/security/smack/smack_access.c
@@ -474,7 +474,7 @@ char *smk_parse_smack(const char *string
 	if (i == 0 || i >= SMK_LONGLABEL)
 		return ERR_PTR(-EINVAL);
 
-	smack = kzalloc(i + 1, GFP_KERNEL);
+	smack = kzalloc(i + 1, GFP_NOFS);
 	if (smack == NULL)
 		return ERR_PTR(-ENOMEM);
 
@@ -545,7 +545,7 @@ struct smack_known *smk_import_entry(con
 	if (skp != NULL)
 		goto freeout;
 
-	skp = kzalloc(sizeof(*skp), GFP_KERNEL);
+	skp = kzalloc(sizeof(*skp), GFP_NOFS);
 	if (skp == NULL) {
 		skp = ERR_PTR(-ENOMEM);
 		goto freeout;
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -268,7 +268,7 @@ static struct smack_known *smk_fetch(con
 	if (!(ip->i_opflags & IOP_XATTR))
 		return ERR_PTR(-EOPNOTSUPP);
 
-	buffer = kzalloc(SMK_LONGLABEL, GFP_KERNEL);
+	buffer = kzalloc(SMK_LONGLABEL, GFP_NOFS);
 	if (buffer == NULL)
 		return ERR_PTR(-ENOMEM);
 

[PATCH 4.9 47/47] NFC: fix attrs checks in netlink interface

[Greg Kroah-Hartman]

From: Andrey Konovalov <andreyknvl@google.com>

commit 18917d51472fe3b126a3a8f756c6b18085eb8130 upstream.

nfc_genl_deactivate_target() relies on the NFC_ATTR_TARGET_INDEX
attribute being present, but doesn't check whether it is actually
provided by the user. Same goes for nfc_genl_fw_download() and
NFC_ATTR_FIRMWARE_NAME.

This patch adds appropriate checks.

Found with syzkaller.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/nfc/netlink.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -973,7 +973,8 @@ static int nfc_genl_dep_link_down(struct
 	int rc;
 	u32 idx;
 
-	if (!info->attrs[NFC_ATTR_DEVICE_INDEX])
+	if (!info->attrs[NFC_ATTR_DEVICE_INDEX] ||
+	    !info->attrs[NFC_ATTR_TARGET_INDEX])
 		return -EINVAL;
 
 	idx = nla_get_u32(info->attrs[NFC_ATTR_DEVICE_INDEX]);
@@ -1022,7 +1023,8 @@ static int nfc_genl_llc_get_params(struc
 	struct sk_buff *msg = NULL;
 	u32 idx;
 
-	if (!info->attrs[NFC_ATTR_DEVICE_INDEX])
+	if (!info->attrs[NFC_ATTR_DEVICE_INDEX] ||
+	    !info->attrs[NFC_ATTR_FIRMWARE_NAME])
 		return -EINVAL;
 
 	idx = nla_get_u32(info->attrs[NFC_ATTR_DEVICE_INDEX]);

Re: [PATCH 4.9 00/47] 4.9.196-stable review

[kernelci.org bot]

stable-rc/linux-4.9.y boot: 41 boots: 0 failed, 41 passed (v4.9.195-48-gce2cf4ffcd94)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.195-48-gce2cf4ffcd94/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.195-48-gce2cf4ffcd94/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.195-48-gce2cf4ffcd94
Git Commit: ce2cf4ffcd946bd02d4afd26f17f425dc921448e
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 23 unique boards, 13 SoC families, 10 builds out of 197

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.9 00/47] 4.9.196-stable review

[Jon Hunter]

On 06/10/2019 18:20, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.196 release.
> There are 47 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue 08 Oct 2019 05:19:59 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.196-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.9:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.9.196-rc1-gce2cf4ffcd94
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.9 00/47] 4.9.196-stable review

[Guenter Roeck]

On 10/6/19 10:20 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.196 release.
> There are 47 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue 08 Oct 2019 05:19:59 PM UTC.
> Anything received after that time might be too late.
> 

Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 356 pass: 356 fail: 0

Guenter

Re: [PATCH 4.9 00/47] 4.9.196-stable review

[Daniel Díaz]

Hello!


On 10/6/19 12:20 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.196 release.
> There are 47 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Tue 08 Oct 2019 05:19:59 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.196-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.9.196-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: ce2cf4ffcd946bd02d4afd26f17f425dc921448e
git describe: v4.9.195-48-gce2cf4ffcd94
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.195-48-gce2cf4ffcd94

No regressions (compared to build v4.9.195)

No fixes (compared to build v4.9.195)

Ran 21656 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* network-basic-tests
* ltp-open-posix-tests
* prep-tmp-disk
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite


Greetings!

Daniel Díaz
daniel.diaz@linaro.org


-- 
Linaro LKFT
https://lkft.linaro.org