[PATCH v1 0/2] Add Caninos Loucos Labrador SoM and Base Board Device Tree

[PATCH v1 0/2] Add Caninos Loucos Labrador SoM and Base Board Device Tree

[Matheus Castello]

Caninos Loucos Labrador is a Brazilian project of open System on Modules and
Base Boards based on Lemaker Guitar. Is an initiative of LSI-TEC a non-profit
organization.

The Labrador SoM v2 is based on Actions Semi S500 processor with 16GB eMMC and
2GB RAM.

This series adds the initial work for device tree files and also adds the
vendor-prefix for the Caninos program. The work was based on the Andreas Färber
device trees for Lemaker Guitar, thanks Andreas.

Tested on my Caninos Labrador v2, only earlycon serial output is available for
now, using the fake clock. I have already worked on something here to add the
clocks and pinctrl nodes to owl-s500.dtsi, but I would like to first add the
initial device tree files and then work on the other patches calmly.

BR,
Matheus Castello

Matheus Castello (2):
  dt-bindings: arm: actions: Document Caninos Loucos Labrador
  ARM: dts: Add Caninos Loucos Labrador

 .../devicetree/bindings/arm/actions.yaml      |  5 +++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 ++
 arch/arm/boot/dts/Makefile                    |  3 +-
 arch/arm/boot/dts/owl-s500-labrador-bb.dts    | 33 +++++++++++++++++++
 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi   | 21 ++++++++++++
 5 files changed, 63 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi

--
2.25.0

[PATCH v1 1/2] dt-bindings: arm: actions: Document Caninos Loucos Labrador

[Matheus Castello]

Update the documentation to add the Caninos Loucos Labrador
vendor-prefix and items that were included in the device tree files.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
 Documentation/devicetree/bindings/arm/actions.yaml     | 5 +++++
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 2 files changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
index ace3fdaa8396..1b131ceb884a 100644
--- a/Documentation/devicetree/bindings/arm/actions.yaml
+++ b/Documentation/devicetree/bindings/arm/actions.yaml
@@ -24,6 +24,11 @@ properties:
               - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B
           - const: lemaker,guitar
           - const: actions,s500
+      - items:
+          - enum:
+              - caninos,labrador-bb # Caninos Loucos Labrador Base Board
+          - const: caninos,labrador
+          - const: actions,s500

       # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
       - items:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9e67944bec9c..3e974dd563cf 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -167,6 +167,8 @@ patternProperties:
     description: Calxeda
   "^capella,.*":
     description: Capella Microsystems, Inc
+  "^caninos,.*":
+    description: Caninos Loucos LSI-TEC NPO
   "^cascoda,.*":
     description: Cascoda, Ltd.
   "^catalyst,.*":
--
2.25.0

Re: [PATCH v1 1/2] dt-bindings: arm: actions: Document Caninos Loucos Labrador

[Manivannan Sadhasivam]

On Thu, Feb 27, 2020 at 05:15:56PM -0300, Matheus Castello wrote:
> Update the documentation to add the Caninos Loucos Labrador
> vendor-prefix and items that were included in the device tree files.
> 

These two should be splitted into separate patches.

Thanks,
Mani

> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
> ---
>  Documentation/devicetree/bindings/arm/actions.yaml     | 5 +++++
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  2 files changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
> index ace3fdaa8396..1b131ceb884a 100644
> --- a/Documentation/devicetree/bindings/arm/actions.yaml
> +++ b/Documentation/devicetree/bindings/arm/actions.yaml
> @@ -24,6 +24,11 @@ properties:
>                - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B
>            - const: lemaker,guitar
>            - const: actions,s500
> +      - items:
> +          - enum:
> +              - caninos,labrador-bb # Caninos Loucos Labrador Base Board
> +          - const: caninos,labrador
> +          - const: actions,s500
> 
>        # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
>        - items:
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 9e67944bec9c..3e974dd563cf 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -167,6 +167,8 @@ patternProperties:
>      description: Calxeda
>    "^capella,.*":
>      description: Capella Microsystems, Inc
> +  "^caninos,.*":
> +    description: Caninos Loucos LSI-TEC NPO
>    "^cascoda,.*":
>      description: Cascoda, Ltd.
>    "^catalyst,.*":
> --
> 2.25.0
> 

[PATCH v2 0/3] Add Caninos Loucos Labrador CoM and Base Board Device Tree

[Matheus Castello]

Thanks Mani for your time reviewing it.

Changes since v1:
(Suggested by Manivannan Sadhasivam)
- Sort the entries alphabetically on Makefile
- Add title comment to the base board dts
- Remove the dt-bindings/leds/common.h (garbage from tests, sorry about that)
- Split the vendor-prefix and documentation in two patches

Caninos Loucos Labrador is a Brazilian project of open System on Modules and
Base Boards based on Lemaker Guitar. Is an initiative of LSI-TEC a non-profit
organization.

The Labrador CoM v2 is based on Actions Semi S500 processor with 16GB eMMC and
2GB RAM.

This series adds the initial work for device tree files and also adds the
vendor-prefix for the Caninos program. The work was based on the Andreas Färber
device trees for Lemaker Guitar, thanks Andreas.

Tested on my Caninos Labrador v2, only earlycon serial output is available for
now, using the fake clock. I have already worked on something here to add the
clocks and pinctrl nodes to owl-s500.dtsi, but I would like to first add the
initial device tree files and then work on the other patches calmly.

BR,
Matheus Castello

Matheus Castello (3):
  dt-bindings: Add vendor prefix for Caninos Loucos
  dt-bindings: arm: actions: Document Caninos Loucos Labrador
  ARM: dts: Add Caninos Loucos Labrador

 .../devicetree/bindings/arm/actions.yaml      |  5 +++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 ++
 arch/arm/boot/dts/Makefile                    |  1 +
 arch/arm/boot/dts/owl-s500-labrador-bb.dts    | 34 +++++++++++++++++++
 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi   | 21 ++++++++++++
 5 files changed, 63 insertions(+)
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi

--
2.25.0

[PATCH v2 1/3] dt-bindings: Add vendor prefix for Caninos Loucos

[Matheus Castello]

The Caninos Loucos Program develops Single Board Computers with an open
structure. The Program wants to form a community of developers to use
the IoT technology and disseminate the learning of embedded systems in
Brazil.

The boards are designed and manufactured by LSI-TEC NPO.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9e67944bec9c..3e974dd563cf 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -167,6 +167,8 @@ patternProperties:
     description: Calxeda
   "^capella,.*":
     description: Capella Microsystems, Inc
+  "^caninos,.*":
+    description: Caninos Loucos LSI-TEC NPO
   "^cascoda,.*":
     description: Cascoda, Ltd.
   "^catalyst,.*":
--
2.25.0

Re: [PATCH v2 1/3] dt-bindings: Add vendor prefix for Caninos Loucos

[Andreas Färber]

Hi Matheus,

Am 07.03.20 um 01:24 schrieb Matheus Castello:
> The Caninos Loucos Program develops Single Board Computers with an open
> structure. The Program wants to form a community of developers to use
> the IoT technology and disseminate the learning of embedded systems in

I would suggest "IoT technologies" without "the".

> Brazil.
> 
> The boards are designed and manufactured by LSI-TEC NPO.
> 
> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
> ---
>   Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 9e67944bec9c..3e974dd563cf 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -167,6 +167,8 @@ patternProperties:
>       description: Calxeda
>     "^capella,.*":
>       description: Capella Microsystems, Inc
> +  "^caninos,.*":
> +    description: Caninos Loucos LSI-TEC NPO

Alphabetical order: n goes before p.

I'm confused by the description... Either this Caninos Loucos is an 
independent vendor and gets its own prefix, or it's LSI-Tec and uses 
something like lsi-tec,caninosloucos-foo. Please clarify commit message 
and/or description line, at least by inserting something like "program 
by", "brand by" or the like rather than just concatenating names. Maybe 
compare UDOO by SECO. Is caninos,foo unique enough or should it be 
caninosloucos,foo? (crazy canines?)

Note that I usually attempt to CC the organizations I'm assigning a 
vendor prefix for. Do you represent them or coordinated with them?

Regards,
Andreas

>     "^cascoda,.*":
>       description: Cascoda, Ltd.
>     "^catalyst,.*":

-- 
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)

Re: [PATCH v2 1/3] dt-bindings: Add vendor prefix for Caninos Loucos

[Matheus Castello]

Hi Andreas,

Em 3/7/20 9:34 AM, Andreas Färber escreveu:
> Hi Matheus,
> 
> Am 07.03.20 um 01:24 schrieb Matheus Castello:
>> The Caninos Loucos Program develops Single Board Computers with an open
>> structure. The Program wants to form a community of developers to use
>> the IoT technology and disseminate the learning of embedded systems in
> 
> I would suggest "IoT technologies" without "the".
> 

ack

>> Brazil.
>>
>> The boards are designed and manufactured by LSI-TEC NPO.
>>
>> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
>> ---
>>   Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>>   1 file changed, 2 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml 
>> b/Documentation/devicetree/bindings/vendor-prefixes.yaml
>> index 9e67944bec9c..3e974dd563cf 100644
>> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
>> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
>> @@ -167,6 +167,8 @@ patternProperties:
>>       description: Calxeda
>>     "^capella,.*":
>>       description: Capella Microsystems, Inc
>> +  "^caninos,.*":
>> +    description: Caninos Loucos LSI-TEC NPO
> 

I will change this to "Caninos Loucos Program"

> Alphabetical order: n goes before p.
> 
> I'm confused by the description... Either this Caninos Loucos is an 
> independent vendor and gets its own prefix, or it's LSI-Tec and uses 
> something like lsi-tec,caninosloucos-foo. Please clarify commit message 
> and/or description line, at least by inserting something like "program 
> by", "brand by" or the like rather than just concatenating names. Maybe 
> compare UDOO by SECO. Is caninos,foo unique enough or should it be 
> caninosloucos,foo? (crazy canines?)
> 

Yes "Caninos Loucos" means crazy canines (or mad dog) in Portuguese. 
This is a initiative that have as co-founder the Jon Maddog Hall, 
because of Jon we have the "maddog", but in Portuguese, on the name of 
program.

 From their website: https://caninosloucos.org/en/program-en/:
"It is an initiative of the Technological Integrated Systems Laboratory 
(LSI-TEC) with the support of Polytechnic School of the University of 
São Paulo (Poli-USP) and Jon “Maddog” Hall"

So I think we can put this instead "The boards are designed and 
manufactured by LSI-TEC NPO." on description.

Let me know what you think about this.

> Note that I usually attempt to CC the organizations I'm assigning a 
> vendor prefix for. Do you represent them or coordinated with them?
>

Thanks for the review and tips. I am adding Edgar Bernardi Righi and 
Igor Ruschi from Caninos team as CC on this patch series.

Best Regards,
Matheus Castello

> Regards,
> Andreas
>
>>     "^cascoda,.*":
>>       description: Cascoda, Ltd.
>>     "^catalyst,.*":
> 

[PATCH v2 2/3] dt-bindings: arm: actions: Document Caninos Loucos Labrador

[Matheus Castello]

Update the documentation to add the Caninos Loucos Labrador. Labrador
project consists of a computer on module based on the Actions Semi S500
processor and the Labrador base board.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
 Documentation/devicetree/bindings/arm/actions.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
index ace3fdaa8396..1b131ceb884a 100644
--- a/Documentation/devicetree/bindings/arm/actions.yaml
+++ b/Documentation/devicetree/bindings/arm/actions.yaml
@@ -24,6 +24,11 @@ properties:
               - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B
           - const: lemaker,guitar
           - const: actions,s500
+      - items:
+          - enum:
+              - caninos,labrador-bb # Caninos Loucos Labrador Base Board
+          - const: caninos,labrador
+          - const: actions,s500

       # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
       - items:
--
2.25.0

[PATCH v2 3/3] ARM: dts: Add Caninos Loucos Labrador

[Matheus Castello]

Add Device Trees for Caninos Loucos Labrador CoM and base board.
Based on the work of Andreas Färber on Lemaker Guitar device tree.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
 arch/arm/boot/dts/Makefile                  |  1 +
 arch/arm/boot/dts/owl-s500-labrador-bb.dts  | 34 +++++++++++++++++++++
 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi | 21 +++++++++++++
 3 files changed, 56 insertions(+)
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6546d2676b9..99f633460833 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -842,6 +842,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 dtb-$(CONFIG_ARCH_ACTIONS) += \
 	owl-s500-cubieboard6.dtb \
 	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-bb.dtb \
 	owl-s500-sparky.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
diff --git a/arch/arm/boot/dts/owl-s500-labrador-bb.dts b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
new file mode 100644
index 000000000000..91012b4a4c30
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador Base Board
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+/dts-v1/;
+
+#include "owl-s500-labrador-v2.dtsi"
+
+/ {
+	compatible = "caninos,labrador-bb", "caninos,labrador", "actions,s500";
+	model = "Caninos Labrador Base Board M v1.0";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	uart3_clk: uart3-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart3_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
new file mode 100644
index 000000000000..0b54f1ef3ec0
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador CoM V2
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "caninos,labrador", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
--
2.25.0

[PATCH v3 0/3] Add Caninos Loucos Labrador CoM and Base Board Device Tree

[Matheus Castello]

Thanks Andreas and Mani for your time reviewing it.

Changes since v2:
(Suggested by Andreas Färber)
- Sort the entries alphabetically on vendor-prefixes.yaml
- Improve commit description
- Add Edgar Bernardi Righi and Igor Ruschi from Caninos team as CC

Changes since v1:
(Suggested by Manivannan Sadhasivam)
- Sort the entries alphabetically on Makefile
- Add title comment to the base board dts
- Remove the dt-bindings/leds/common.h (garbage from tests, sorry about that)
- Split the vendor-prefix and documentation in two patches

Caninos Loucos Labrador is a Brazilian project of open System on Modules and
Base Boards based on Lemaker Guitar. Is an initiative of LSI-TEC a non-profit
organization.

The Labrador CoM v2 is based on Actions Semi S500 processor with 16GB eMMC and
2GB RAM.

This series adds the initial work for device tree files and also adds the
vendor-prefix for the Caninos program. The work was based on the Andreas Färber
device trees for Lemaker Guitar, thanks Andreas.

Tested on my Caninos Labrador v2, only earlycon serial output is available for
now, using the fake clock. I have already worked on something here to add the
clocks and pinctrl nodes to owl-s500.dtsi, but I would like to first add the
initial device tree files and then work on the other patches calmly.

Stay safe,
Matheus Castello

Matheus Castello (3):
  dt-bindings: Add vendor prefix for Caninos Loucos
  dt-bindings: arm: actions: Document Caninos Loucos Labrador
  ARM: dts: Add Caninos Loucos Labrador

 .../devicetree/bindings/arm/actions.yaml      |  5 +++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 ++
 arch/arm/boot/dts/Makefile                    |  1 +
 arch/arm/boot/dts/owl-s500-labrador-bb.dts    | 34 +++++++++++++++++++
 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi   | 21 ++++++++++++
 5 files changed, 63 insertions(+)
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi

--
2.25.0

[PATCH v3 1/3] dt-bindings: Add vendor prefix for Caninos Loucos

[Matheus Castello]

The Caninos Loucos Program develops Single Board Computers with an open
structure. The Program wants to form a community of developers to use
IoT technologies and disseminate the learning of embedded systems in
Brazil.

It is an initiative of the Technological Integrated Systems Laboratory
(LSI-TEC) with the support of Polytechnic School of the University of
São Paulo (Poli-USP) and Jon "Maddog" Hall.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 9e67944bec9c..16ee382dc6b2 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -165,6 +165,8 @@ patternProperties:
     description: CALAO Systems SAS
   "^calxeda,.*":
     description: Calxeda
+  "^caninos,.*":
+    description: Caninos Loucos Program
   "^capella,.*":
     description: Capella Microsystems, Inc
   "^cascoda,.*":
--
2.25.0

Re: [PATCH v3 1/3] dt-bindings: Add vendor prefix for Caninos Loucos

[Rob Herring]

On Fri, 20 Mar 2020 00:51:02 -0300, Matheus Castello wrote:
> The Caninos Loucos Program develops Single Board Computers with an open
> structure. The Program wants to form a community of developers to use
> IoT technologies and disseminate the learning of embedded systems in
> Brazil.
> 
> It is an initiative of the Technological Integrated Systems Laboratory
> (LSI-TEC) with the support of Polytechnic School of the University of
> São Paulo (Poli-USP) and Jon "Maddog" Hall.
> 
> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 1/3] dt-bindings: Add vendor prefix for Caninos Loucos

[Andreas Färber]

Am 20.03.20 um 04:51 schrieb Matheus Castello:
> The Caninos Loucos Program develops Single Board Computers with an open
> structure. The Program wants to form a community of developers to use
> IoT technologies and disseminate the learning of embedded systems in
> Brazil.
> 
> It is an initiative of the Technological Integrated Systems Laboratory
> (LSI-TEC) with the support of Polytechnic School of the University of
> São Paulo (Poli-USP) and Jon "Maddog" Hall.
> 
> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
> ---
>   Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 9e67944bec9c..16ee382dc6b2 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -165,6 +165,8 @@ patternProperties:
>       description: CALAO Systems SAS
>     "^calxeda,.*":
>       description: Calxeda
> +  "^caninos,.*":
> +    description: Caninos Loucos Program
>     "^capella,.*":
>       description: Capella Microsystems, Inc
>     "^cascoda,.*":

Reviewed-by: Andreas Färber <afaerber@suse.de>

Thanks,
Andreas

-- 
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)

[PATCH v3 2/3] dt-bindings: arm: actions: Document Caninos Loucos Labrador

[Matheus Castello]

Update the documentation to add the Caninos Loucos Labrador. Labrador
project consists of a computer on module based on the Actions Semi S500
processor and the Labrador base board.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
 Documentation/devicetree/bindings/arm/actions.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
index ace3fdaa8396..1b131ceb884a 100644
--- a/Documentation/devicetree/bindings/arm/actions.yaml
+++ b/Documentation/devicetree/bindings/arm/actions.yaml
@@ -24,6 +24,11 @@ properties:
               - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B
           - const: lemaker,guitar
           - const: actions,s500
+      - items:
+          - enum:
+              - caninos,labrador-bb # Caninos Loucos Labrador Base Board
+          - const: caninos,labrador
+          - const: actions,s500

       # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
       - items:
--
2.25.0

Re: [PATCH v3 2/3] dt-bindings: arm: actions: Document Caninos Loucos Labrador

[Rob Herring]

On Fri, 20 Mar 2020 00:51:03 -0300, Matheus Castello wrote:
> Update the documentation to add the Caninos Loucos Labrador. Labrador
> project consists of a computer on module based on the Actions Semi S500
> processor and the Labrador base board.
> 
> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
> ---
>  Documentation/devicetree/bindings/arm/actions.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 2/3] dt-bindings: arm: actions: Document Caninos Loucos Labrador

[Andreas Färber]

+ linux-actions

Am 20.03.20 um 04:51 schrieb Matheus Castello:
> Update the documentation to add the Caninos Loucos Labrador. Labrador
> project consists of a computer on module based on the Actions Semi S500
> processor and the Labrador base board.
> 
> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
> ---
>   Documentation/devicetree/bindings/arm/actions.yaml | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
> index ace3fdaa8396..1b131ceb884a 100644
> --- a/Documentation/devicetree/bindings/arm/actions.yaml
> +++ b/Documentation/devicetree/bindings/arm/actions.yaml
> @@ -24,6 +24,11 @@ properties:
>                 - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B
>             - const: lemaker,guitar
>             - const: actions,s500
> +      - items:
> +          - enum:
> +              - caninos,labrador-bb # Caninos Loucos Labrador Base Board
> +          - const: caninos,labrador
> +          - const: actions,s500
> 
>         # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
>         - items:

Now that you chose to stick with caninos rather than lsi prefix, the 
sort order compared to lemaker remains wrong.

Looking at https://caninosloucos.org/en/labrador-en/ there's a "CORE 
BOARD V2.0" and a "BASE BOARD M V1.0".

Assuming the v2 is not software-relevant, shouldn't the M be reflected 
in the compatible string? For example, "caninos,labrador-core" and 
"caninos,labrador-m"? You're free to use -bb-m of course, but no need to 
copy LeMaker -bb naming for your board. What does your PCB say?

Also note that other recent bindings have been using a description 
attribute - not sure whether we can apply that a) to the SoM and b) to 
the base board here. Please compare other in-tree bindings.

Regards,
Andreas

-- 
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)

[PATCH v3 3/3] ARM: dts: Add Caninos Loucos Labrador

[Matheus Castello]

Add Device Trees for Caninos Loucos Labrador CoM and base board.
Based on the work of Andreas Färber on Lemaker Guitar device tree.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
 arch/arm/boot/dts/Makefile                  |  1 +
 arch/arm/boot/dts/owl-s500-labrador-bb.dts  | 34 +++++++++++++++++++++
 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi | 21 +++++++++++++
 3 files changed, 56 insertions(+)
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6546d2676b9..99f633460833 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -842,6 +842,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 dtb-$(CONFIG_ARCH_ACTIONS) += \
 	owl-s500-cubieboard6.dtb \
 	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-bb.dtb \
 	owl-s500-sparky.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
diff --git a/arch/arm/boot/dts/owl-s500-labrador-bb.dts b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
new file mode 100644
index 000000000000..91012b4a4c30
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador Base Board
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+/dts-v1/;
+
+#include "owl-s500-labrador-v2.dtsi"
+
+/ {
+	compatible = "caninos,labrador-bb", "caninos,labrador", "actions,s500";
+	model = "Caninos Labrador Base Board M v1.0";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	uart3_clk: uart3-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart3_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
new file mode 100644
index 000000000000..0b54f1ef3ec0
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador CoM V2
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "caninos,labrador", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
--
2.25.0

Re: [PATCH v3 3/3] ARM: dts: Add Caninos Loucos Labrador

[Manivannan Sadhasivam]

On Fri, Mar 20, 2020 at 12:51:04AM -0300, Matheus Castello wrote:
> Add Device Trees for Caninos Loucos Labrador CoM and base board.
> Based on the work of Andreas Färber on Lemaker Guitar device tree.
> 
> Signed-off-by: Matheus Castello <matheus@castello.eng.br>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Will queue the series for v5.8 once Andreas is happy with it.

Nit: Please keep linux-actions@lists.infradead.org in CC for all future
patches/replies.

Thanks,
Mani

> ---
>  arch/arm/boot/dts/Makefile                  |  1 +
>  arch/arm/boot/dts/owl-s500-labrador-bb.dts  | 34 +++++++++++++++++++++
>  arch/arm/boot/dts/owl-s500-labrador-v2.dtsi | 21 +++++++++++++
>  3 files changed, 56 insertions(+)
>  create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts
>  create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d6546d2676b9..99f633460833 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -842,6 +842,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
>  dtb-$(CONFIG_ARCH_ACTIONS) += \
>  	owl-s500-cubieboard6.dtb \
>  	owl-s500-guitar-bb-rev-b.dtb \
> +	owl-s500-labrador-bb.dtb \
>  	owl-s500-sparky.dtb
>  dtb-$(CONFIG_ARCH_PRIMA2) += \
>  	prima2-evb.dtb
> diff --git a/arch/arm/boot/dts/owl-s500-labrador-bb.dts b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
> new file mode 100644
> index 000000000000..91012b4a4c30
> --- /dev/null
> +++ b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Caninos Labrador Base Board
> + *
> + * Copyright (c) 2019-2020 Matheus Castello
> + */
> +
> +/dts-v1/;
> +
> +#include "owl-s500-labrador-v2.dtsi"
> +
> +/ {
> +	compatible = "caninos,labrador-bb", "caninos,labrador", "actions,s500";
> +	model = "Caninos Labrador Base Board M v1.0";
> +
> +	aliases {
> +		serial3 = &uart3;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial3:115200n8";
> +	};
> +
> +	uart3_clk: uart3-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <921600>;
> +		#clock-cells = <0>;
> +	};
> +};
> +
> +&uart3 {
> +	status = "okay";
> +	clocks = <&uart3_clk>;
> +};
> diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
> new file mode 100644
> index 000000000000..0b54f1ef3ec0
> --- /dev/null
> +++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Caninos Labrador CoM V2
> + *
> + * Copyright (c) 2019-2020 Matheus Castello
> + */
> +
> +#include "owl-s500.dtsi"
> +
> +/ {
> +	compatible = "caninos,labrador", "actions,s500";
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x80000000>;
> +	};
> +};
> +
> +&timer {
> +	clocks = <&hosc>;
> +};
> --
> 2.25.0
> 

Re: [PATCH v3 3/3] ARM: dts: Add Caninos Loucos Labrador

[Matheus Castello]

Hi Andreas,

Em 4/5/20 3:51 AM, Manivannan Sadhasivam escreveu:
> On Fri, Mar 20, 2020 at 12:51:04AM -0300, Matheus Castello wrote:
>> Add Device Trees for Caninos Loucos Labrador CoM and base board.
>> Based on the work of Andreas Färber on Lemaker Guitar device tree.
>>
>> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> 
> Will queue the series for v5.8 once Andreas is happy with it.
> 

do you have any more concerns about these patches? Let me know.

BR,
Matheus Castello

> Nit: Please keep linux-actions@lists.infradead.org in CC for all future
> patches/replies.
> 
> Thanks,
> Mani
> 
>> ---
>>   arch/arm/boot/dts/Makefile                  |  1 +
>>   arch/arm/boot/dts/owl-s500-labrador-bb.dts  | 34 +++++++++++++++++++++
>>   arch/arm/boot/dts/owl-s500-labrador-v2.dtsi | 21 +++++++++++++
>>   3 files changed, 56 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts
>>   create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index d6546d2676b9..99f633460833 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -842,6 +842,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
>>   dtb-$(CONFIG_ARCH_ACTIONS) += \
>>   	owl-s500-cubieboard6.dtb \
>>   	owl-s500-guitar-bb-rev-b.dtb \
>> +	owl-s500-labrador-bb.dtb \
>>   	owl-s500-sparky.dtb
>>   dtb-$(CONFIG_ARCH_PRIMA2) += \
>>   	prima2-evb.dtb
>> diff --git a/arch/arm/boot/dts/owl-s500-labrador-bb.dts b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
>> new file mode 100644
>> index 000000000000..91012b4a4c30
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
>> @@ -0,0 +1,34 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Caninos Labrador Base Board
>> + *
>> + * Copyright (c) 2019-2020 Matheus Castello
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "owl-s500-labrador-v2.dtsi"
>> +
>> +/ {
>> +	compatible = "caninos,labrador-bb", "caninos,labrador", "actions,s500";
>> +	model = "Caninos Labrador Base Board M v1.0";
>> +
>> +	aliases {
>> +		serial3 = &uart3;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial3:115200n8";
>> +	};
>> +
>> +	uart3_clk: uart3-clk {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <921600>;
>> +		#clock-cells = <0>;
>> +	};
>> +};
>> +
>> +&uart3 {
>> +	status = "okay";
>> +	clocks = <&uart3_clk>;
>> +};
>> diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
>> new file mode 100644
>> index 000000000000..0b54f1ef3ec0
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
>> @@ -0,0 +1,21 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Caninos Labrador CoM V2
>> + *
>> + * Copyright (c) 2019-2020 Matheus Castello
>> + */
>> +
>> +#include "owl-s500.dtsi"
>> +
>> +/ {
>> +	compatible = "caninos,labrador", "actions,s500";
>> +
>> +	memory@0 {
>> +		device_type = "memory";
>> +		reg = <0x0 0x80000000>;
>> +	};
>> +};
>> +
>> +&timer {
>> +	clocks = <&hosc>;
>> +};
>> --
>> 2.25.0
>>

Re: [PATCH v3 3/3] ARM: dts: Add Caninos Loucos Labrador

[Andreas Färber]

Hi Matheus,

Am 23.04.20 um 17:20 schrieb Matheus Castello:
> Em 4/5/20 3:51 AM, Manivannan Sadhasivam escreveu:
>> On Fri, Mar 20, 2020 at 12:51:04AM -0300, Matheus Castello wrote:
>>> Add Device Trees for Caninos Loucos Labrador CoM and base board.
>>> Based on the work of Andreas Färber on Lemaker Guitar device tree.
>>>
>>> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
>>
>> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>>
>> Will queue the series for v5.8 once Andreas is happy with it.
> 
> do you have any more concerns about these patches? Let me know.

I've reviewed the preceding two patches. This one here looks okay,

Reviewed-by: Andreas Färber <afaerber@suse.de>

but see 2/3 - model here does contain M and your .dtsi is named -v2 - 
what's the difference to v1? If it's big enough to warrant a separate 
.dtsi, you should consider whether a versioned compatible string may be 
needed, too (likely in addition to, not instead of a generic one). No v1 
info on the website.

Thanks,
Andreas

-- 
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)

Re: [PATCH v3 3/3] ARM: dts: Add Caninos Loucos Labrador

[Matheus Castello]

Hi Andreas,

thanks for the review.

Em 4/26/20 8:58 AM, Andreas Färber escreveu:
> Hi Matheus,
> 
> Am 23.04.20 um 17:20 schrieb Matheus Castello:
>> Em 4/5/20 3:51 AM, Manivannan Sadhasivam escreveu:
>>> On Fri, Mar 20, 2020 at 12:51:04AM -0300, Matheus Castello wrote:
>>>> Add Device Trees for Caninos Loucos Labrador CoM and base board.
>>>> Based on the work of Andreas Färber on Lemaker Guitar device tree.
>>>>
>>>> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
>>>
>>> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>>>
>>> Will queue the series for v5.8 once Andreas is happy with it.
>>
>> do you have any more concerns about these patches? Let me know.
> 
> I've reviewed the preceding two patches. This one here looks okay,
> 
> Reviewed-by: Andreas Färber <afaerber@suse.de>
> 
> but see 2/3 - model here does contain M and your .dtsi is named -v2 - 
> what's the difference to v1? If it's big enough to warrant a separate 
> .dtsi, you should consider whether a versioned compatible string may be 
> needed, too (likely in addition to, not instead of a generic one). No v1 
> info on the website.
> 

The difference between v1 and v2 is the model and vendor of the DRAM and 
storage eMMC. But that had no impact on the software.

Checking examples on "/Documentation/devicetree/bindings/arm/" I saw 
that some add enum descriptions for both the base board and system on 
module, keeping in const only the vendor prefix of the SoC. And in the 
device tree both have the model property description. I liked this 
example, I think I will follow it in v4.

About "-bb-" in the file name and description: on PCB is written 
"Labrador Base-M v1.0a", so with that I think it is better to leave only 
base on the name.

I will send the v4, thank you very much for the review.

BR,
Matheus Castello

> Thanks,
> Andreas
> 

[PATCH v4 0/3] Add Caninos Loucos Labrador CoM and Base Board Device Tree

[Matheus Castello]

Thanks Andreas, Mani and Rob for your time reviewing it.

Changes since v3:
(Suggested by Andreas Färber)
- Fix sort on actions.yaml
- Change the file owl-s500-labrador-bb.dts to owl-s500-labrador-base-m.dts
- Add description for both the SoM and Base Board
- Add Model description for both the SoM and Base Board

Changes since v2:
(Suggested by Andreas Färber)
- Sort the entries alphabetically on vendor-prefixes.yaml
- Improve commit description
- Add Edgar Bernardi Righi and Igor Ruschi from Caninos team as CC

Caninos Loucos Labrador is a Brazilian project of open System on Modules and
Base Boards based on Lemaker Guitar. Is an initiative of LSI-TEC a non-profit
organization.

The Labrador CoM v2 is based on Actions Semi S500 processor with 16GB eMMC and
2GB RAM.

This series adds the initial work for device tree files and also adds the
vendor-prefix for the Caninos program. The work was based on the Andreas Färber
device trees for Lemaker Guitar, thanks Andreas.

Tested on my Caninos Labrador v2, only earlycon serial output is available for
now, using the fake clock. I have already worked on something here to add the
clocks and pinctrl nodes to owl-s500.dtsi, but I would like to first add the
initial device tree files and then work on the other patches calmly.

Stay safe,
Matheus Castello

Matheus Castello (3):
  dt-bindings: Add vendor prefix for Caninos Loucos
  dt-bindings: arm: actions: Document Caninos Loucos Labrador
  ARM: dts: Add Caninos Loucos Labrador

 .../devicetree/bindings/arm/actions.yaml      | 11 ++++--
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 ++
 arch/arm/boot/dts/Makefile                    |  1 +
 .../arm/boot/dts/owl-s500-labrador-base-m.dts | 34 +++++++++++++++++++
 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi   | 22 ++++++++++++
 5 files changed, 67 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-base-m.dts
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi

--
2.25.0

[PATCH v4 1/3] dt-bindings: Add vendor prefix for Caninos Loucos

[Matheus Castello]

The Caninos Loucos Program develops Single Board Computers with an open
structure. The Program wants to form a community of developers to use
IoT technologies and disseminate the learning of embedded systems in
Brazil.

It is an initiative of the Technological Integrated Systems Laboratory
(LSI-TEC) with the support of Polytechnic School of the University of
São Paulo (Poli-USP) and Jon "Maddog" Hall.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index d3891386d671..a20a05e3deaa 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -167,6 +167,8 @@ patternProperties:
     description: CALAO Systems SAS
   "^calxeda,.*":
     description: Calxeda
+  "^caninos,.*":
+    description: Caninos Loucos Program
   "^capella,.*":
     description: Capella Microsystems, Inc
   "^cascoda,.*":
--
2.25.0

[PATCH v4 2/3] dt-bindings: arm: actions: Document Caninos Loucos Labrador

[Matheus Castello]

Update the documentation to add the Caninos Loucos Labrador. Labrador
project consists of a computer on module based on the Actions Semi S500
processor and the Labrador base board.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/actions.yaml | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
index ace3fdaa8396..50dd976128dc 100644
--- a/Documentation/devicetree/bindings/arm/actions.yaml
+++ b/Documentation/devicetree/bindings/arm/actions.yaml
@@ -21,9 +21,14 @@ properties:
           - const: actions,s500
       - items:
           - enum:
-              - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B
-          - const: lemaker,guitar
-          - const: actions,s500
+	      - caninos,labrador-v2 # Labrador Core v2
+	      - caninos,labrador-base-m # Labrador Base Board M v1
+	  - const: actions,s500
+      - items:
+          - enum:
+	      - lemaker,guitar-bb-rev-b # LeMaker Guitar Base Board rev. B
+	  - const: lemaker,guitar
+	  - const: actions,s500

       # The Actions Semi S700 is a quad-core ARM Cortex-A53 SoC.
       - items:
--
2.25.0

Re: [PATCH v4 2/3] dt-bindings: arm: actions: Document Caninos Loucos Labrador

[Rob Herring]

On Sun, 26 Apr 2020 13:58:34 -0300, Matheus Castello wrote:
> Update the documentation to add the Caninos Loucos Labrador. Labrador
> project consists of a computer on module based on the Actions Semi S500
> processor and the Labrador base board.
> 
> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>  Documentation/devicetree/bindings/arm/actions.yaml | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/arm/actions.yaml:  while scanning for the next token
found character that cannot start any token
  in "<unicode string>", line 24, column 1
Documentation/devicetree/bindings/Makefile:11: recipe for target 'Documentation/devicetree/bindings/arm/actions.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/arm/actions.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
warning: no schema found in file: Documentation/devicetree/bindings/arm/actions.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/actions.yaml: ignoring, error parsing file
warning: no schema found in file: Documentation/devicetree/bindings/arm/actions.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/actions.yaml: ignoring, error parsing file
Makefile:1300: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1277145

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.

[PATCH v4 3/3] ARM: dts: Add Caninos Loucos Labrador

[Matheus Castello]

Add Device Trees for Caninos Loucos Labrador CoM and base board.
Based on the work of Andreas Färber on Lemaker Guitar device tree.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
---
 arch/arm/boot/dts/Makefile                    |  1 +
 .../arm/boot/dts/owl-s500-labrador-base-m.dts | 34 +++++++++++++++++++
 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi   | 22 ++++++++++++
 3 files changed, 57 insertions(+)
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-base-m.dts
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e8dd99201397..02a619d7bf2e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -856,6 +856,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 dtb-$(CONFIG_ARCH_ACTIONS) += \
 	owl-s500-cubieboard6.dtb \
 	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-base-m.dtb \
 	owl-s500-sparky.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
new file mode 100644
index 000000000000..044568fec25e
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador Base Board
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+/dts-v1/;
+
+#include "owl-s500-labrador-v2.dtsi"
+
+/ {
+	model = "Caninos Labrador Base-M v1.0a";
+	compatible = "caninos,labrador-base-m", "actions,s500";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	uart3_clk: uart3-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart3_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
new file mode 100644
index 000000000000..f31def6b248a
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador SoM V2
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	model = "Caninos Labrador Core V2.1";
+	compatible = "caninos,labrador-v2", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
--
2.25.0

[PATCH v1 2/2] ARM: dts: Add Caninos Loucos Labrador

[Matheus Castello]

Add Device Trees for Caninos Loucos Labrador SoM and base board.
Based on the work of Andreas Färber on Lemaker Guitar device tree.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
 arch/arm/boot/dts/Makefile                  |  3 +-
 arch/arm/boot/dts/owl-s500-labrador-bb.dts  | 33 +++++++++++++++++++++
 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi | 21 +++++++++++++
 3 files changed, 56 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts
 create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d6546d2676b9..acdf65ef3236 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -842,7 +842,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 dtb-$(CONFIG_ARCH_ACTIONS) += \
 	owl-s500-cubieboard6.dtb \
 	owl-s500-guitar-bb-rev-b.dtb \
-	owl-s500-sparky.dtb
+	owl-s500-sparky.dtb \
+	owl-s500-labrador-bb.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
 dtb-$(CONFIG_ARCH_PXA) += \
diff --git a/arch/arm/boot/dts/owl-s500-labrador-bb.dts b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
new file mode 100644
index 000000000000..1e821804da30
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+/dts-v1/;
+
+#include "owl-s500-labrador-v2.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "caninos,labrador-bb", "caninos,labrador", "actions,s500";
+	model = "Caninos Labrador Base Board M v1.0";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	uart3_clk: uart3-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <921600>;
+		#clock-cells = <0>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	clocks = <&uart3_clk>;
+};
diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
new file mode 100644
index 000000000000..ee079f02b5dd
--- /dev/null
+++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador SoM V2
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "caninos,labrador", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
--
2.25.0

Re: [PATCH v1 2/2] ARM: dts: Add Caninos Loucos Labrador

[Manivannan Sadhasivam]

Hi,

Thanks for the patch! Please find comments inline.

On Thu, Feb 27, 2020 at 05:15:57PM -0300, Matheus Castello wrote:
> Add Device Trees for Caninos Loucos Labrador SoM and base board.
> Based on the work of Andreas Färber on Lemaker Guitar device tree.
> 
> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
> ---
>  arch/arm/boot/dts/Makefile                  |  3 +-
>  arch/arm/boot/dts/owl-s500-labrador-bb.dts  | 33 +++++++++++++++++++++
>  arch/arm/boot/dts/owl-s500-labrador-v2.dtsi | 21 +++++++++++++
>  3 files changed, 56 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/owl-s500-labrador-bb.dts
>  create mode 100644 arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d6546d2676b9..acdf65ef3236 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -842,7 +842,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
>  dtb-$(CONFIG_ARCH_ACTIONS) += \
>  	owl-s500-cubieboard6.dtb \
>  	owl-s500-guitar-bb-rev-b.dtb \
> -	owl-s500-sparky.dtb
> +	owl-s500-sparky.dtb \
> +	owl-s500-labrador-bb.dtb

Please sort the entries alphabetically.

>  dtb-$(CONFIG_ARCH_PRIMA2) += \
>  	prima2-evb.dtb
>  dtb-$(CONFIG_ARCH_PXA) += \
> diff --git a/arch/arm/boot/dts/owl-s500-labrador-bb.dts b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
> new file mode 100644
> index 000000000000..1e821804da30
> --- /dev/null
> +++ b/arch/arm/boot/dts/owl-s500-labrador-bb.dts
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*

A title here would be helpful like how you added for the SoM below.

> + * Copyright (c) 2019-2020 Matheus Castello
> + */
> +
> +/dts-v1/;
> +
> +#include "owl-s500-labrador-v2.dtsi"
> +#include <dt-bindings/leds/common.h>

Do we need this now?

Thanks,
Mani

> +
> +/ {
> +	compatible = "caninos,labrador-bb", "caninos,labrador", "actions,s500";
> +	model = "Caninos Labrador Base Board M v1.0";
> +
> +	aliases {
> +		serial3 = &uart3;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial3:115200n8";
> +	};
> +
> +	uart3_clk: uart3-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <921600>;
> +		#clock-cells = <0>;
> +	};
> +};
> +
> +&uart3 {
> +	status = "okay";
> +	clocks = <&uart3_clk>;
> +};
> diff --git a/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
> new file mode 100644
> index 000000000000..ee079f02b5dd
> --- /dev/null
> +++ b/arch/arm/boot/dts/owl-s500-labrador-v2.dtsi
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Caninos Labrador SoM V2
> + *
> + * Copyright (c) 2019-2020 Matheus Castello
> + */
> +
> +#include "owl-s500.dtsi"
> +
> +/ {
> +	compatible = "caninos,labrador", "actions,s500";
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x80000000>;
> +	};
> +};
> +
> +&timer {
> +	clocks = <&hosc>;
> +};
> --
> 2.25.0
>