* [PATCH v2 1/7] dt-bindings: timer: Add bindings for NVIDIA Tegra186 timers
2020-03-31 22:19 [PATCH v2 0/7] clocksource: Add NVIDIA Tegra186 timers support Thierry Reding
@ 2020-03-31 22:19 ` Thierry Reding
2020-03-31 22:19 ` [PATCH v2 2/7] clocksource: Add Tegra186 timers support Thierry Reding
` (5 subsequent siblings)
6 siblings, 0 replies; 14+ messages in thread
From: Thierry Reding @ 2020-03-31 22:19 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Thierry Reding
Cc: Rob Herring, Jon Hunter, devicetree, linux-tegra, linux-kernel
From: Thierry Reding <treding@nvidia.com>
The NVIDIA Tegra186 SoC contains an IP block that provides a register
interface for ten timers with a 29-bit counter that can generate one-
shot, periodic or watchdog interrupts.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v2:
- add required properties section
- add additionalProperties: false
- do not show status in example
.../bindings/timer/nvidia,tegra186-timer.yaml | 61 +++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
new file mode 100644
index 000000000000..d722cd267bf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 timers
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jonathan Hunter <jonathanh@nvidia.com>
+
+description: |
+ The Tegra186 timer provides ten 29-bit timer counters and one 32-bit TSC
+ (timestamp counter). The timers run at either a fixed 1 MHz clock rate
+ derived from the oscillator clock. Each timer can be programmed to raise
+ one-shot, periodic, or watchdog interrupts.
+
+properties:
+ compatible:
+ oneOf:
+ - description: NVIDIA Tegra186
+ items:
+ - const: nvidia,tegra186-timer
+
+ - description: NVIDIA Tegra194
+ items:
+ - const: nvidia,tegra194-timer
+ - const: nvidia,tegra186-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 10
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ timer@3010000 {
+ compatible = "nvidia,tegra186-timer";
+ reg = <0x03010000 0x000e0000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
--
2.24.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 2/7] clocksource: Add Tegra186 timers support
2020-03-31 22:19 [PATCH v2 0/7] clocksource: Add NVIDIA Tegra186 timers support Thierry Reding
2020-03-31 22:19 ` [PATCH v2 1/7] dt-bindings: timer: Add bindings for NVIDIA Tegra186 timers Thierry Reding
@ 2020-03-31 22:19 ` Thierry Reding
2020-04-03 16:14 ` Dmitry Osipenko
` (2 more replies)
2020-03-31 22:19 ` [PATCH v2 3/7] arm64: tegra: Order nodes by unit-address on Tegra194 Thierry Reding
` (4 subsequent siblings)
6 siblings, 3 replies; 14+ messages in thread
From: Thierry Reding @ 2020-03-31 22:19 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Thierry Reding
Cc: Rob Herring, Jon Hunter, devicetree, linux-tegra, linux-kernel
From: Thierry Reding <treding@nvidia.com>
Currently this only supports a single watchdog, which uses a timer in
the background for countdown. Eventually the timers could be used for
various time-keeping tasks, but by default the architected timer will
already provide that functionality.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v2:
- add dependency on WATCHDOG && WATCHDOG_CORE
- expose TSC, OSC and USEC clocksources
- implement suspend/resume support
- make driver tristate
drivers/clocksource/Kconfig | 8 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-tegra186.c | 505 +++++++++++++++++++++++++++
3 files changed, 514 insertions(+)
create mode 100644 drivers/clocksource/timer-tegra186.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index f2142e6bbea3..385573c215d8 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -149,6 +149,14 @@ config TEGRA_TIMER
help
Enables support for the Tegra driver.
+config TEGRA186_TIMER
+ tristate "NVIDIA Tegra186 timer driver"
+ depends on ARCH_TEGRA || COMPILE_TEST
+ depends on WATCHDOG && WATCHDOG_CORE
+ help
+ Enables support for the timers and watchdogs found on NVIDIA
+ Tegra186 and later SoCs.
+
config VT8500_TIMER
bool "VT8500 timer driver" if COMPILE_TEST
depends on HAS_IOMEM
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 641ba5383ab5..ffa7950f4b7c 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_SUN4I_TIMER) += timer-sun4i.o
obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
obj-$(CONFIG_MESON6_TIMER) += timer-meson6.o
obj-$(CONFIG_TEGRA_TIMER) += timer-tegra.o
+obj-$(CONFIG_TEGRA186_TIMER) += timer-tegra186.o
obj-$(CONFIG_VT8500_TIMER) += timer-vt8500.o
obj-$(CONFIG_NSPIRE_TIMER) += timer-zevio.o
obj-$(CONFIG_BCM_KONA_TIMER) += bcm_kona_timer.o
diff --git a/drivers/clocksource/timer-tegra186.c b/drivers/clocksource/timer-tegra186.c
new file mode 100644
index 000000000000..c1ee573f0a0f
--- /dev/null
+++ b/drivers/clocksource/timer-tegra186.c
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019-2020 NVIDIA Corporation. All rights reserved.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/watchdog.h>
+
+/* shared registers */
+#define TKETSC0 0x000
+#define TKETSC1 0x004
+#define TKEUSEC 0x008
+#define TKEOSC 0x00c
+
+#define TKEIE(x) (0x100 + ((x) * 4))
+#define TKEIE_WDT_MASK(x, y) ((y) << (16 + 4 * (x)))
+
+/* timer registers */
+#define TMRCR 0x000
+#define TMRCR_ENABLE BIT(31)
+#define TMRCR_PERIODIC BIT(30)
+#define TMRCR_PTV(x) ((x) & 0x0fffffff)
+
+#define TMRSR 0x004
+#define TMRSR_INTR_CLR BIT(30)
+
+#define TMRCSSR 0x008
+#define TMRCSSR_SRC_USEC (0 << 0)
+
+/* watchdog registers */
+#define WDTCR 0x000
+#define WDTCR_SYSTEM_POR_RESET_ENABLE BIT(16)
+#define WDTCR_SYSTEM_DEBUG_RESET_ENABLE BIT(15)
+#define WDTCR_REMOTE_INT_ENABLE BIT(14)
+#define WDTCR_LOCAL_FIQ_ENABLE BIT(13)
+#define WDTCR_LOCAL_INT_ENABLE BIT(12)
+#define WDTCR_PERIOD_MASK (0xff << 4)
+#define WDTCR_PERIOD(x) (((x) & 0xff) << 4)
+#define WDTCR_TIMER_SOURCE_MASK 0xf
+#define WDTCR_TIMER_SOURCE(x) ((x) & 0xf)
+
+#define WDTCMDR 0x008
+#define WDTCMDR_DISABLE_COUNTER BIT(1)
+#define WDTCMDR_START_COUNTER BIT(0)
+
+#define WDTUR 0x00c
+#define WDTUR_UNLOCK_PATTERN 0x0000c45a
+
+struct tegra186_timer_soc {
+ unsigned int num_timers;
+ unsigned int num_wdts;
+};
+
+struct tegra186_tmr {
+ struct tegra186_timer *parent;
+ void __iomem *regs;
+ unsigned int index;
+ unsigned int hwirq;
+};
+
+struct tegra186_wdt {
+ struct watchdog_device base;
+
+ void __iomem *regs;
+ unsigned int index;
+ bool locked;
+
+ struct tegra186_tmr *tmr;
+};
+
+static inline struct tegra186_wdt *to_tegra186_wdt(struct watchdog_device *wdd)
+{
+ return container_of(wdd, struct tegra186_wdt, base);
+}
+
+struct tegra186_timer {
+ const struct tegra186_timer_soc *soc;
+ struct device *dev;
+ void __iomem *regs;
+ unsigned int irq;
+
+ struct tegra186_wdt *wdt;
+ struct clocksource usec;
+ struct clocksource tsc;
+ struct clocksource osc;
+};
+
+static void tmr_writel(struct tegra186_tmr *tmr, u32 value, unsigned int offset)
+{
+ writel(value, tmr->regs + offset);
+}
+
+static void wdt_writel(struct tegra186_wdt *wdt, u32 value, unsigned int offset)
+{
+ writel(value, wdt->regs + offset);
+}
+
+static u32 wdt_readl(struct tegra186_wdt *wdt, unsigned int offset)
+{
+ return readl(wdt->regs + offset);
+}
+
+static struct tegra186_tmr *tegra186_tmr_create(struct tegra186_timer *tegra,
+ unsigned int index)
+{
+ unsigned int offset = 0x10000 + index * 0x10000;
+ struct tegra186_tmr *tmr;
+
+ tmr = devm_kzalloc(tegra->dev, sizeof(*tmr), GFP_KERNEL);
+ if (!tmr)
+ return ERR_PTR(-ENOMEM);
+
+ tmr->parent = tegra;
+ tmr->regs = tegra->regs + offset;
+ tmr->index = index;
+ tmr->hwirq = 0;
+
+ return tmr;
+}
+
+static const struct watchdog_info tegra186_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+ .identity = "NVIDIA Tegra186 WDT",
+};
+
+static void tegra186_wdt_disable(struct tegra186_wdt *wdt)
+{
+ /* unlock and disable the watchdog */
+ wdt_writel(wdt, WDTUR_UNLOCK_PATTERN, WDTUR);
+ wdt_writel(wdt, WDTCMDR_DISABLE_COUNTER, WDTCMDR);
+
+ /* disable timer */
+ tmr_writel(wdt->tmr, 0, TMRCR);
+}
+
+static void tegra186_wdt_enable(struct tegra186_wdt *wdt)
+{
+ struct tegra186_timer *tegra = wdt->tmr->parent;
+ u32 value;
+
+ /* unmask hardware IRQ, this may have been lost across powergate */
+ value = TKEIE_WDT_MASK(wdt->index, 1);
+ writel(value, tegra->regs + TKEIE(wdt->tmr->hwirq));
+
+ /* clear interrupt */
+ tmr_writel(wdt->tmr, TMRSR_INTR_CLR, TMRSR);
+
+ /* select microsecond source */
+ tmr_writel(wdt->tmr, TMRCSSR_SRC_USEC, TMRCSSR);
+
+ /* configure timer (system reset happens on the fifth expiration) */
+ value = TMRCR_PTV(wdt->base.timeout * USEC_PER_SEC / 5) |
+ TMRCR_PERIODIC | TMRCR_ENABLE;
+ tmr_writel(wdt->tmr, value, TMRCR);
+
+ if (!wdt->locked) {
+ value = wdt_readl(wdt, WDTCR);
+
+ /* select the proper timer source */
+ value &= ~WDTCR_TIMER_SOURCE_MASK;
+ value |= WDTCR_TIMER_SOURCE(wdt->tmr->index);
+
+ /* single timer period since that's already configured */
+ value &= ~WDTCR_PERIOD_MASK;
+ value |= WDTCR_PERIOD(1);
+
+ /* enable local interrupt for WDT petting */
+ value |= WDTCR_LOCAL_INT_ENABLE;
+
+ /* enable local FIQ and remote interrupt for debug dump */
+ if (0)
+ value |= WDTCR_REMOTE_INT_ENABLE |
+ WDTCR_LOCAL_FIQ_ENABLE;
+
+ /* enable system debug reset (doesn't properly reboot) */
+ if (0)
+ value |= WDTCR_SYSTEM_DEBUG_RESET_ENABLE;
+
+ /* enable system POR reset */
+ value |= WDTCR_SYSTEM_POR_RESET_ENABLE;
+
+ wdt_writel(wdt, value, WDTCR);
+ }
+
+ wdt_writel(wdt, WDTCMDR_START_COUNTER, WDTCMDR);
+}
+
+static int tegra186_wdt_start(struct watchdog_device *wdd)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ tegra186_wdt_enable(wdt);
+
+ return 0;
+}
+
+static int tegra186_wdt_stop(struct watchdog_device *wdd)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ tegra186_wdt_disable(wdt);
+
+ return 0;
+}
+
+static int tegra186_wdt_ping(struct watchdog_device *wdd)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ tegra186_wdt_disable(wdt);
+ tegra186_wdt_enable(wdt);
+
+ return 0;
+}
+
+static int tegra186_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
+
+ tegra186_wdt_disable(wdt);
+ wdt->base.timeout = timeout;
+ tegra186_wdt_enable(wdt);
+
+ return 0;
+}
+
+static const struct watchdog_ops tegra186_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = tegra186_wdt_start,
+ .stop = tegra186_wdt_stop,
+ .ping = tegra186_wdt_ping,
+ .set_timeout = tegra186_wdt_set_timeout,
+};
+
+static struct tegra186_wdt *tegra186_wdt_create(struct tegra186_timer *tegra,
+ unsigned int index)
+{
+ unsigned int offset = 0x10000, source;
+ struct tegra186_wdt *wdt;
+ u32 value;
+ int err;
+
+ offset += tegra->soc->num_timers * 0x10000 + index * 0x10000;
+
+ wdt = devm_kzalloc(tegra->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return ERR_PTR(-ENOMEM);
+
+ wdt->regs = tegra->regs + offset;
+ wdt->index = index;
+
+ /* read the watchdog configuration since it might be locked down */
+ value = wdt_readl(wdt, WDTCR);
+
+ if (value & WDTCR_LOCAL_INT_ENABLE)
+ wdt->locked = true;
+
+ source = value & WDTCR_TIMER_SOURCE_MASK;
+
+ wdt->tmr = tegra186_tmr_create(tegra, source);
+ if (IS_ERR(wdt->tmr))
+ return ERR_CAST(wdt->tmr);
+
+ wdt->base.info = &tegra186_wdt_info;
+ wdt->base.ops = &tegra186_wdt_ops;
+ wdt->base.min_timeout = 1;
+ wdt->base.max_timeout = 255;
+ wdt->base.parent = tegra->dev;
+
+ err = watchdog_init_timeout(&wdt->base, 5, tegra->dev);
+ if (err < 0) {
+ dev_err(tegra->dev, "failed to initialize timeout: %d\n", err);
+ return ERR_PTR(err);
+ }
+
+ err = devm_watchdog_register_device(tegra->dev, &wdt->base);
+ if (err < 0) {
+ dev_err(tegra->dev, "failed to register WDT: %d\n", err);
+ return ERR_PTR(err);
+ }
+
+ return wdt;
+}
+
+static u64 tegra186_timer_tsc_read(struct clocksource *cs)
+{
+ struct tegra186_timer *tegra = container_of(cs, struct tegra186_timer,
+ tsc);
+ u32 hi, lo, ss;
+
+ hi = readl_relaxed(tegra->regs + TKETSC1);
+
+ /*
+ * The 56-bit value of the TSC is spread across two registers that are
+ * not synchronized. In order to read them atomically, ensure that the
+ * high 24 bits match before and after reading the low 32 bits.
+ */
+ do {
+ /* snapshot the high 24 bits */
+ ss = hi;
+
+ lo = readl_relaxed(tegra->regs + TKETSC0);
+ hi = readl_relaxed(tegra->regs + TKETSC1);
+ } while (hi != ss);
+
+ return (u64)hi << 32 | lo;
+}
+
+static int tegra186_timer_tsc_init(struct tegra186_timer *tegra)
+{
+ tegra->tsc.name = "tsc";
+ tegra->tsc.rating = 300;
+ tegra->tsc.read = tegra186_timer_tsc_read;
+ tegra->tsc.mask = CLOCKSOURCE_MASK(56);
+ tegra->tsc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&tegra->tsc, 31250000);
+}
+
+static u64 tegra186_timer_osc_read(struct clocksource *cs)
+{
+ struct tegra186_timer *tegra = container_of(cs, struct tegra186_timer,
+ osc);
+
+ return readl_relaxed(tegra->regs + TKEOSC);
+}
+
+static int tegra186_timer_osc_init(struct tegra186_timer *tegra)
+{
+ tegra->osc.name = "osc";
+ tegra->osc.rating = 300;
+ tegra->osc.read = tegra186_timer_osc_read;
+ tegra->osc.mask = CLOCKSOURCE_MASK(32);
+ tegra->osc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&tegra->osc, 38400000);
+}
+
+static u64 tegra186_timer_usec_read(struct clocksource *cs)
+{
+ struct tegra186_timer *tegra = container_of(cs, struct tegra186_timer,
+ usec);
+
+ return readl_relaxed(tegra->regs + TKEUSEC);
+}
+
+static int tegra186_timer_usec_init(struct tegra186_timer *tegra)
+{
+ tegra->usec.name = "usec";
+ tegra->usec.rating = 300;
+ tegra->usec.read = tegra186_timer_usec_read;
+ tegra->usec.mask = CLOCKSOURCE_MASK(32);
+ tegra->usec.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ return clocksource_register_hz(&tegra->usec, USEC_PER_SEC);
+}
+
+static irqreturn_t tegra186_timer_irq(int irq, void *data)
+{
+ struct tegra186_timer *tegra = data;
+
+ if (tegra->wdt) {
+ tegra186_wdt_disable(tegra->wdt);
+ tegra186_wdt_enable(tegra->wdt);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int tegra186_timer_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct tegra186_timer *tegra;
+ int err;
+
+ tegra = devm_kzalloc(dev, sizeof(*tegra), GFP_KERNEL);
+ if (!tegra)
+ return -ENOMEM;
+
+ tegra->soc = of_device_get_match_data(dev);
+ dev_set_drvdata(dev, tegra);
+ tegra->dev = dev;
+
+ tegra->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(tegra->regs))
+ return PTR_ERR(tegra->regs);
+
+ err = platform_get_irq(pdev, 0);
+ if (err < 0) {
+ dev_err(dev, "failed to get interrupt #0: %d\n", err);
+ return err;
+ }
+
+ tegra->irq = err;
+
+ err = devm_request_irq(dev, tegra->irq, tegra186_timer_irq,
+ IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+ "tegra186-timer", tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to request IRQ#%u: %d\n", tegra->irq, err);
+ return err;
+ }
+
+ /* create a watchdog using a preconfigured timer */
+ tegra->wdt = tegra186_wdt_create(tegra, 0);
+ if (IS_ERR(tegra->wdt)) {
+ err = PTR_ERR(tegra->wdt);
+ dev_err(dev, "failed to create WDT: %d\n", err);
+ return err;
+ }
+
+ err = tegra186_timer_tsc_init(tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to register TSC counter: %d\n", err);
+ return err;
+ }
+
+ err = tegra186_timer_osc_init(tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to register OSC counter: %d\n", err);
+ goto unregister_tsc;
+ }
+
+ err = tegra186_timer_usec_init(tegra);
+ if (err < 0) {
+ dev_err(dev, "failed to register USEC counter: %d\n", err);
+ goto unregister_osc;
+ }
+
+ return 0;
+
+unregister_osc:
+ clocksource_unregister(&tegra->osc);
+unregister_tsc:
+ clocksource_unregister(&tegra->tsc);
+ return err;
+}
+
+static int tegra186_timer_remove(struct platform_device *pdev)
+{
+ struct tegra186_timer *tegra = platform_get_drvdata(pdev);
+
+ clocksource_unregister(&tegra->usec);
+ clocksource_unregister(&tegra->osc);
+ clocksource_unregister(&tegra->tsc);
+
+ return 0;
+}
+
+static int __maybe_unused tegra186_timer_suspend(struct device *dev)
+{
+ struct tegra186_timer *tegra = dev_get_drvdata(dev);
+
+ if (tegra->wdt)
+ tegra186_wdt_disable(tegra->wdt);
+
+ return 0;
+}
+
+static int __maybe_unused tegra186_timer_resume(struct device *dev)
+{
+ struct tegra186_timer *tegra = dev_get_drvdata(dev);
+
+ if (tegra->wdt)
+ tegra186_wdt_enable(tegra->wdt);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tegra186_timer_pm_ops, tegra186_timer_suspend,
+ tegra186_timer_resume);
+
+static const struct tegra186_timer_soc tegra186_timer = {
+ .num_timers = 10,
+ .num_wdts = 3,
+};
+
+static const struct of_device_id tegra186_timer_of_match[] = {
+ { .compatible = "nvidia,tegra186-timer", .data = &tegra186_timer },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tegra186_timer_of_match);
+
+static struct platform_driver tegra186_wdt_driver = {
+ .driver = {
+ .name = "tegra186-timer",
+ .pm = &tegra186_timer_pm_ops,
+ .of_match_table = tegra186_timer_of_match,
+ },
+ .probe = tegra186_timer_probe,
+ .remove = tegra186_timer_remove,
+};
+module_platform_driver(tegra186_wdt_driver);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra186 timers driver");
+MODULE_LICENSE("GPL v2");
--
2.24.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH v2 2/7] clocksource: Add Tegra186 timers support
2020-03-31 22:19 ` [PATCH v2 2/7] clocksource: Add Tegra186 timers support Thierry Reding
@ 2020-04-03 16:14 ` Dmitry Osipenko
2020-04-03 20:13 ` Thierry Reding
2020-04-03 16:24 ` Dmitry Osipenko
2020-04-03 16:33 ` Dmitry Osipenko
2 siblings, 1 reply; 14+ messages in thread
From: Dmitry Osipenko @ 2020-04-03 16:14 UTC (permalink / raw)
To: Thierry Reding, Daniel Lezcano, Thomas Gleixner
Cc: Rob Herring, Jon Hunter, devicetree, linux-tegra, linux-kernel
01.04.2020 01:19, Thierry Reding пишет:
...
> +static void tmr_writel(struct tegra186_tmr *tmr, u32 value, unsigned int offset)
> +{
> + writel(value, tmr->regs + offset);
relaxed?
> +}
> +
> +static void wdt_writel(struct tegra186_wdt *wdt, u32 value, unsigned int offset)
> +{
> + writel(value, wdt->regs + offset);
relaxed?
> +}
> +
> +static u32 wdt_readl(struct tegra186_wdt *wdt, unsigned int offset)
> +{
> + return readl(wdt->regs + offset);
relaxed?
> +}
...
> +static irqreturn_t tegra186_timer_irq(int irq, void *data)
> +{
> + struct tegra186_timer *tegra = data;
> +
> + if (tegra->wdt) {
Why this check is needed? Please see more below in regards to
devm_request_irq().
> + tegra186_wdt_disable(tegra->wdt);
> + tegra186_wdt_enable(tegra->wdt);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int tegra186_timer_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct tegra186_timer *tegra;
> + int err;
> +
> + tegra = devm_kzalloc(dev, sizeof(*tegra), GFP_KERNEL);
> + if (!tegra)
> + return -ENOMEM;
> +
> + tegra->soc = of_device_get_match_data(dev);
> + dev_set_drvdata(dev, tegra);
> + tegra->dev = dev;
> +
> + tegra->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(tegra->regs))
> + return PTR_ERR(tegra->regs);
> +
> + err = platform_get_irq(pdev, 0);
> + if (err < 0) {
> + dev_err(dev, "failed to get interrupt #0: %d\n", err);
Duplicated error message isn't needed for platform_get_irq().
> + return err;
> + }
> +
> + tegra->irq = err;
> +
> + err = devm_request_irq(dev, tegra->irq, tegra186_timer_irq,
> + IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
Why IRQF_ONESHOT?
And IRQF_TRIGGER_HIGH?.. the interrupt-level should come from the
device-tree.
> + "tegra186-timer", tegra);
> + if (err < 0) {
> + dev_err(dev, "failed to request IRQ#%u: %d\n", tegra->irq, err);
> + return err;
> + }
Interrupt should be requested at the end of tegra186_timer_probe(),
otherwise probe order isn't correct, leading to a potential race conditions.
> + /* create a watchdog using a preconfigured timer */
> + tegra->wdt = tegra186_wdt_create(tegra, 0);
> + if (IS_ERR(tegra->wdt)) {
> + err = PTR_ERR(tegra->wdt);
> + dev_err(dev, "failed to create WDT: %d\n", err);
> + return err;
> + }
> +
> + err = tegra186_timer_tsc_init(tegra);
> + if (err < 0) {
> + dev_err(dev, "failed to register TSC counter: %d\n", err);
> + return err;
> + }
> +
> + err = tegra186_timer_osc_init(tegra);
> + if (err < 0) {
> + dev_err(dev, "failed to register OSC counter: %d\n", err);
> + goto unregister_tsc;
> + }
> +
> + err = tegra186_timer_usec_init(tegra);
> + if (err < 0) {
> + dev_err(dev, "failed to register USEC counter: %d\n", err);
> + goto unregister_osc;
> + }
> +
> + return 0;
> +
> +unregister_osc:
> + clocksource_unregister(&tegra->osc);
> +unregister_tsc:
> + clocksource_unregister(&tegra->tsc);
Looks like there is an opportunity for devm_clocksource_register_hz().
> + return err;
> +}
> +
> +static int tegra186_timer_remove(struct platform_device *pdev)
> +{
> + struct tegra186_timer *tegra = platform_get_drvdata(pdev);
> +
> + clocksource_unregister(&tegra->usec);
> + clocksource_unregister(&tegra->osc);
> + clocksource_unregister(&tegra->tsc);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused tegra186_timer_suspend(struct device *dev)
> +{
> + struct tegra186_timer *tegra = dev_get_drvdata(dev);
> +
> + if (tegra->wdt)
> + tegra186_wdt_disable(tegra->wdt);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused tegra186_timer_resume(struct device *dev)
> +{
> + struct tegra186_timer *tegra = dev_get_drvdata(dev);
> +
> + if (tegra->wdt)
Could tegra->wdt ever be NULL?
> + tegra186_wdt_enable(tegra->wdt);
> +
> + return 0;
> +}
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v2 2/7] clocksource: Add Tegra186 timers support
2020-04-03 16:14 ` Dmitry Osipenko
@ 2020-04-03 20:13 ` Thierry Reding
0 siblings, 0 replies; 14+ messages in thread
From: Thierry Reding @ 2020-04-03 20:13 UTC (permalink / raw)
To: Dmitry Osipenko
Cc: Daniel Lezcano, Thomas Gleixner, Rob Herring, Jon Hunter,
devicetree, linux-tegra, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 5601 bytes --]
On Fri, Apr 03, 2020 at 07:14:33PM +0300, Dmitry Osipenko wrote:
> 01.04.2020 01:19, Thierry Reding пишет:
> ...
> > +static void tmr_writel(struct tegra186_tmr *tmr, u32 value, unsigned int offset)
> > +{
> > + writel(value, tmr->regs + offset);
>
> relaxed?
>
> > +}
> > +
> > +static void wdt_writel(struct tegra186_wdt *wdt, u32 value, unsigned int offset)
> > +{
> > + writel(value, wdt->regs + offset);
>
> relaxed?
>
> > +}
> > +
> > +static u32 wdt_readl(struct tegra186_wdt *wdt, unsigned int offset)
> > +{
> > + return readl(wdt->regs + offset);
>
> relaxed?
Done.
>
> > +}
>
> ...
> > +static irqreturn_t tegra186_timer_irq(int irq, void *data)
> > +{
> > + struct tegra186_timer *tegra = data;
> > +
> > + if (tegra->wdt) {
>
> Why this check is needed? Please see more below in regards to
> devm_request_irq().
We don't need it. However, I've changed all of these instances to
watchdog_active() calls instead to make sure we only ping the WDT
when we need to.
>
> > + tegra186_wdt_disable(tegra->wdt);
> > + tegra186_wdt_enable(tegra->wdt);
> > + }
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int tegra186_timer_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct tegra186_timer *tegra;
> > + int err;
> > +
> > + tegra = devm_kzalloc(dev, sizeof(*tegra), GFP_KERNEL);
> > + if (!tegra)
> > + return -ENOMEM;
> > +
> > + tegra->soc = of_device_get_match_data(dev);
> > + dev_set_drvdata(dev, tegra);
> > + tegra->dev = dev;
> > +
> > + tegra->regs = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(tegra->regs))
> > + return PTR_ERR(tegra->regs);
> > +
> > + err = platform_get_irq(pdev, 0);
> > + if (err < 0) {
> > + dev_err(dev, "failed to get interrupt #0: %d\n", err);
>
> Duplicated error message isn't needed for platform_get_irq().
Dropped.
> > + return err;
> > + }
> > +
> > + tegra->irq = err;
> > +
> > + err = devm_request_irq(dev, tegra->irq, tegra186_timer_irq,
> > + IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
>
> Why IRQF_ONESHOT?
>
> And IRQF_TRIGGER_HIGH?.. the interrupt-level should come from the
> device-tree.
Yeah, I don't know how I came up with these. Probably copied them from
somewhere else. I've dropped both of these since they aren't needed.
> > + "tegra186-timer", tegra);
> > + if (err < 0) {
> > + dev_err(dev, "failed to request IRQ#%u: %d\n", tegra->irq, err);
> > + return err;
> > + }
>
> Interrupt should be requested at the end of tegra186_timer_probe(),
> otherwise probe order isn't correct, leading to a potential race conditions.
I don't think there's an actual issue here because the watchdog that is
initialized below is disabled by default and won't be enabled until the
userspace explicitly asks it to. Since the watchdog is the only one to
currently generate an interrupt, this should be fine.
That said, you're right and it's safer to initialize the interrupt as
late as possible, so I've moved this to the end of the function.
>
> > + /* create a watchdog using a preconfigured timer */
> > + tegra->wdt = tegra186_wdt_create(tegra, 0);
> > + if (IS_ERR(tegra->wdt)) {
> > + err = PTR_ERR(tegra->wdt);
> > + dev_err(dev, "failed to create WDT: %d\n", err);
> > + return err;
> > + }
> > +
> > + err = tegra186_timer_tsc_init(tegra);
> > + if (err < 0) {
> > + dev_err(dev, "failed to register TSC counter: %d\n", err);
> > + return err;
> > + }
> > +
> > + err = tegra186_timer_osc_init(tegra);
> > + if (err < 0) {
> > + dev_err(dev, "failed to register OSC counter: %d\n", err);
> > + goto unregister_tsc;
> > + }
> > +
> > + err = tegra186_timer_usec_init(tegra);
> > + if (err < 0) {
> > + dev_err(dev, "failed to register USEC counter: %d\n", err);
> > + goto unregister_osc;
> > + }
> > +
> > + return 0;
> > +
And added an unregister_usec: label here to clean up the USEC
clocksource if we fail to request the IRQ.
> > +unregister_osc:
> > + clocksource_unregister(&tegra->osc);
> > +unregister_tsc:
> > + clocksource_unregister(&tegra->tsc);
>
> Looks like there is an opportunity for devm_clocksource_register_hz().
Yeah, I guess I could follow up with a patch to do that. I suspect that
there's no such implementation because very few drivers actually end up
unregistering their clocksources. A quick grep shows that only about
one fifth of the users unregister the clocksource.
If Daniel and Thomas think this is a good idea I can look at adding that
and converting some of the users.
> > + return err;
> > +}
> > +
> > +static int tegra186_timer_remove(struct platform_device *pdev)
> > +{
> > + struct tegra186_timer *tegra = platform_get_drvdata(pdev);
> > +
> > + clocksource_unregister(&tegra->usec);
> > + clocksource_unregister(&tegra->osc);
> > + clocksource_unregister(&tegra->tsc);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused tegra186_timer_suspend(struct device *dev)
> > +{
> > + struct tegra186_timer *tegra = dev_get_drvdata(dev);
> > +
> > + if (tegra->wdt)
> > + tegra186_wdt_disable(tegra->wdt);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused tegra186_timer_resume(struct device *dev)
> > +{
> > + struct tegra186_timer *tegra = dev_get_drvdata(dev);
> > +
> > + if (tegra->wdt)
>
> Could tegra->wdt ever be NULL?
No, it can't. But as above, I've used watchdog_active() here to make
sure we only enable the watchdog when we should.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/7] clocksource: Add Tegra186 timers support
2020-03-31 22:19 ` [PATCH v2 2/7] clocksource: Add Tegra186 timers support Thierry Reding
2020-04-03 16:14 ` Dmitry Osipenko
@ 2020-04-03 16:24 ` Dmitry Osipenko
2020-04-03 20:14 ` Thierry Reding
2020-04-03 16:33 ` Dmitry Osipenko
2 siblings, 1 reply; 14+ messages in thread
From: Dmitry Osipenko @ 2020-04-03 16:24 UTC (permalink / raw)
To: Thierry Reding, Daniel Lezcano, Thomas Gleixner
Cc: Rob Herring, Jon Hunter, devicetree, linux-tegra, linux-kernel
01.04.2020 01:19, Thierry Reding пишет:
...
> +static int tegra186_wdt_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
> +
> + tegra186_wdt_disable(wdt);
> + wdt->base.timeout = timeout;
> + tegra186_wdt_enable(wdt);
Why changing timeout enables the watchdog?
> + return 0;
> +}
> +
> +static const struct watchdog_ops tegra186_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = tegra186_wdt_start,
> + .stop = tegra186_wdt_stop,
> + .ping = tegra186_wdt_ping,
> + .set_timeout = tegra186_wdt_set_timeout,
> +};
...
> +static int __maybe_unused tegra186_timer_suspend(struct device *dev)
> +{
> + struct tegra186_timer *tegra = dev_get_drvdata(dev);
> +
> + if (tegra->wdt)
> + tegra186_wdt_disable(tegra->wdt);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused tegra186_timer_resume(struct device *dev)
> +{
> + struct tegra186_timer *tegra = dev_get_drvdata(dev);
> +
> + if (tegra->wdt)
> + tegra186_wdt_enable(tegra->wdt);
What if watchdog is in a stopped state? Why it's enabled unconditionally?
> + return 0;
> +}
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v2 2/7] clocksource: Add Tegra186 timers support
2020-04-03 16:24 ` Dmitry Osipenko
@ 2020-04-03 20:14 ` Thierry Reding
0 siblings, 0 replies; 14+ messages in thread
From: Thierry Reding @ 2020-04-03 20:14 UTC (permalink / raw)
To: Dmitry Osipenko
Cc: Daniel Lezcano, Thomas Gleixner, Rob Herring, Jon Hunter,
devicetree, linux-tegra, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1572 bytes --]
On Fri, Apr 03, 2020 at 07:24:55PM +0300, Dmitry Osipenko wrote:
> 01.04.2020 01:19, Thierry Reding пишет:
> ...
> > +static int tegra186_wdt_set_timeout(struct watchdog_device *wdd,
> > + unsigned int timeout)
> > +{
> > + struct tegra186_wdt *wdt = to_tegra186_wdt(wdd);
> > +
> > + tegra186_wdt_disable(wdt);
> > + wdt->base.timeout = timeout;
> > + tegra186_wdt_enable(wdt);
>
> Why changing timeout enables the watchdog?
We have to disable and enable to make it accept the new settings and to
restart the counter. But you're right, we should only do that when the
WDT is actually active, so I've conditionalized the disable/enable calls
on watchdog_active().
>
> > + return 0;
> > +}
> > +
> > +static const struct watchdog_ops tegra186_wdt_ops = {
> > + .owner = THIS_MODULE,
> > + .start = tegra186_wdt_start,
> > + .stop = tegra186_wdt_stop,
> > + .ping = tegra186_wdt_ping,
> > + .set_timeout = tegra186_wdt_set_timeout,
> > +};
>
> ...
> > +static int __maybe_unused tegra186_timer_suspend(struct device *dev)
> > +{
> > + struct tegra186_timer *tegra = dev_get_drvdata(dev);
> > +
> > + if (tegra->wdt)
> > + tegra186_wdt_disable(tegra->wdt);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused tegra186_timer_resume(struct device *dev)
> > +{
> > + struct tegra186_timer *tegra = dev_get_drvdata(dev);
> > +
> > + if (tegra->wdt)
> > + tegra186_wdt_enable(tegra->wdt);
>
> What if watchdog is in a stopped state? Why it's enabled unconditionally?
Same as above.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v2 2/7] clocksource: Add Tegra186 timers support
2020-03-31 22:19 ` [PATCH v2 2/7] clocksource: Add Tegra186 timers support Thierry Reding
2020-04-03 16:14 ` Dmitry Osipenko
2020-04-03 16:24 ` Dmitry Osipenko
@ 2020-04-03 16:33 ` Dmitry Osipenko
2020-04-03 20:15 ` Thierry Reding
2 siblings, 1 reply; 14+ messages in thread
From: Dmitry Osipenko @ 2020-04-03 16:33 UTC (permalink / raw)
To: Thierry Reding, Daniel Lezcano, Thomas Gleixner
Cc: Rob Herring, Jon Hunter, devicetree, linux-tegra, linux-kernel
01.04.2020 01:19, Thierry Reding пишет:
...
> +static int tegra186_timer_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct tegra186_timer *tegra;
> + int err;
> +
> + tegra = devm_kzalloc(dev, sizeof(*tegra), GFP_KERNEL);
> + if (!tegra)
> + return -ENOMEM;
> +
> + tegra->soc = of_device_get_match_data(dev);
> + dev_set_drvdata(dev, tegra);
> + tegra->dev = dev;
> +
> + tegra->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(tegra->regs))
> + return PTR_ERR(tegra->regs);
> +
> + err = platform_get_irq(pdev, 0);
> + if (err < 0) {
> + dev_err(dev, "failed to get interrupt #0: %d\n", err);
> + return err;
> + }
> +
> + tegra->irq = err;
> +
> + err = devm_request_irq(dev, tegra->irq, tegra186_timer_irq,
> + IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> + "tegra186-timer", tegra);
Looks like there is no need to store tegra->irq in the struct
tegra186_timer.
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH v2 2/7] clocksource: Add Tegra186 timers support
2020-04-03 16:33 ` Dmitry Osipenko
@ 2020-04-03 20:15 ` Thierry Reding
0 siblings, 0 replies; 14+ messages in thread
From: Thierry Reding @ 2020-04-03 20:15 UTC (permalink / raw)
To: Dmitry Osipenko
Cc: Daniel Lezcano, Thomas Gleixner, Rob Herring, Jon Hunter,
devicetree, linux-tegra, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1295 bytes --]
On Fri, Apr 03, 2020 at 07:33:24PM +0300, Dmitry Osipenko wrote:
> 01.04.2020 01:19, Thierry Reding пишет:
> ...
> > +static int tegra186_timer_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct tegra186_timer *tegra;
> > + int err;
> > +
> > + tegra = devm_kzalloc(dev, sizeof(*tegra), GFP_KERNEL);
> > + if (!tegra)
> > + return -ENOMEM;
> > +
> > + tegra->soc = of_device_get_match_data(dev);
> > + dev_set_drvdata(dev, tegra);
> > + tegra->dev = dev;
> > +
> > + tegra->regs = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(tegra->regs))
> > + return PTR_ERR(tegra->regs);
> > +
> > + err = platform_get_irq(pdev, 0);
> > + if (err < 0) {
> > + dev_err(dev, "failed to get interrupt #0: %d\n", err);
> > + return err;
> > + }
> > +
> > + tegra->irq = err;
> > +
> > + err = devm_request_irq(dev, tegra->irq, tegra186_timer_irq,
> > + IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> > + "tegra186-timer", tegra);
>
> Looks like there is no need to store tegra->irq in the struct
> tegra186_timer.
After moving devm_request_irq() to a later point in ->probe() we now
have to store it somewhere because err is being reused. But I can store
it in a local variable instead.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 3/7] arm64: tegra: Order nodes by unit-address on Tegra194
2020-03-31 22:19 [PATCH v2 0/7] clocksource: Add NVIDIA Tegra186 timers support Thierry Reding
2020-03-31 22:19 ` [PATCH v2 1/7] dt-bindings: timer: Add bindings for NVIDIA Tegra186 timers Thierry Reding
2020-03-31 22:19 ` [PATCH v2 2/7] clocksource: Add Tegra186 timers support Thierry Reding
@ 2020-03-31 22:19 ` Thierry Reding
2020-03-31 22:19 ` [PATCH v2 4/7] arm64: tegra: Add native timer support on Tegra186 Thierry Reding
` (3 subsequent siblings)
6 siblings, 0 replies; 14+ messages in thread
From: Thierry Reding @ 2020-03-31 22:19 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Thierry Reding
Cc: Rob Herring, Jon Hunter, devicetree, linux-tegra, linux-kernel
From: Thierry Reding <treding@nvidia.com>
The pin controller device tree node was accidentally added in the wrong
place. Move it to the correct location to keep nodes ordered by unit-
address.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 64 ++++++++++++------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index f4ede86e32b4..019f66f03a97 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -45,6 +45,38 @@ gpio: gpio@2200000 {
gpio-controller;
};
+ pinmux: pinmux@2430000 {
+ compatible = "nvidia,tegra194-pinmux";
+ reg = <0x2430000 0x17000
+ 0xc300000 0x4000>;
+
+ status = "okay";
+
+ pex_rst_c5_out_state: pex_rst_c5_out {
+ pex_rst {
+ nvidia,pins = "pex_l5_rst_n_pgg1";
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,lpdr = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+ };
+
+ clkreq_c5_bi_dir_state: clkreq_c5_bi_dir {
+ clkreq {
+ nvidia,pins = "pex_l5_clkreq_n_pgg0";
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,lpdr = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+ };
+ };
+
ethernet@2490000 {
compatible = "nvidia,tegra194-eqos",
"nvidia,tegra186-eqos",
@@ -139,38 +171,6 @@ agic: interrupt-controller@2a40000 {
};
};
- pinmux: pinmux@2430000 {
- compatible = "nvidia,tegra194-pinmux";
- reg = <0x2430000 0x17000
- 0xc300000 0x4000>;
-
- status = "okay";
-
- pex_rst_c5_out_state: pex_rst_c5_out {
- pex_rst {
- nvidia,pins = "pex_l5_rst_n_pgg1";
- nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,lpdr = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- };
- };
-
- clkreq_c5_bi_dir_state: clkreq_c5_bi_dir {
- clkreq {
- nvidia,pins = "pex_l5_clkreq_n_pgg0";
- nvidia,schmitt = <TEGRA_PIN_DISABLE>;
- nvidia,lpdr = <TEGRA_PIN_ENABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- };
- };
- };
-
mc: memory-controller@2c00000 {
compatible = "nvidia,tegra194-mc";
reg = <0x02c00000 0x100000>,
--
2.24.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 4/7] arm64: tegra: Add native timer support on Tegra186
2020-03-31 22:19 [PATCH v2 0/7] clocksource: Add NVIDIA Tegra186 timers support Thierry Reding
` (2 preceding siblings ...)
2020-03-31 22:19 ` [PATCH v2 3/7] arm64: tegra: Order nodes by unit-address on Tegra194 Thierry Reding
@ 2020-03-31 22:19 ` Thierry Reding
2020-03-31 22:19 ` [PATCH v2 5/7] arm64: tegra: Enable native timers on Jetson TX2 Thierry Reding
` (2 subsequent siblings)
6 siblings, 0 replies; 14+ messages in thread
From: Thierry Reding @ 2020-03-31 22:19 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Thierry Reding
Cc: Rob Herring, Jon Hunter, devicetree, linux-tegra, linux-kernel
From: Thierry Reding <treding@nvidia.com>
The native timers IP block found on NVIDIA Tegra SoCs implements a
watchdog timer that can be used to recover from system hangs. Add the
device tree node on Tegra186.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 58100fb9cd8b..4dfa70e93693 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -167,6 +167,22 @@ emc: external-memory-controller@2c60000 {
};
};
+ timer@3010000 {
+ compatible = "nvidia,tegra186-timer";
+ reg = <0x0 0x03010000 0x0 0x000e0000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
uarta: serial@3100000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x03100000 0x0 0x40>;
--
2.24.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 5/7] arm64: tegra: Enable native timers on Jetson TX2
2020-03-31 22:19 [PATCH v2 0/7] clocksource: Add NVIDIA Tegra186 timers support Thierry Reding
` (3 preceding siblings ...)
2020-03-31 22:19 ` [PATCH v2 4/7] arm64: tegra: Add native timer support on Tegra186 Thierry Reding
@ 2020-03-31 22:19 ` Thierry Reding
2020-03-31 22:19 ` [PATCH v2 6/7] arm64: tegra: Add native timer support on Tegra194 Thierry Reding
2020-03-31 22:19 ` [PATCH v2 7/7] arm64: tegra: Enable native timers on Jetson AGX Xavier Thierry Reding
6 siblings, 0 replies; 14+ messages in thread
From: Thierry Reding @ 2020-03-31 22:19 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Thierry Reding
Cc: Rob Herring, Jon Hunter, devicetree, linux-tegra, linux-kernel
From: Thierry Reding <treding@nvidia.com>
Enable the native timers on Jetson TX2 to allow using the watchdog
functionality to recover from system hangs, for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index da96de04d003..9aa17744c4a0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -58,6 +58,10 @@ memory-controller@2c00000 {
status = "okay";
};
+ timer@3010000 {
+ status = "okay";
+ };
+
serial@3100000 {
status = "okay";
};
--
2.24.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 6/7] arm64: tegra: Add native timer support on Tegra194
2020-03-31 22:19 [PATCH v2 0/7] clocksource: Add NVIDIA Tegra186 timers support Thierry Reding
` (4 preceding siblings ...)
2020-03-31 22:19 ` [PATCH v2 5/7] arm64: tegra: Enable native timers on Jetson TX2 Thierry Reding
@ 2020-03-31 22:19 ` Thierry Reding
2020-03-31 22:19 ` [PATCH v2 7/7] arm64: tegra: Enable native timers on Jetson AGX Xavier Thierry Reding
6 siblings, 0 replies; 14+ messages in thread
From: Thierry Reding @ 2020-03-31 22:19 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Thierry Reding
Cc: Rob Herring, Jon Hunter, devicetree, linux-tegra, linux-kernel
From: Thierry Reding <treding@nvidia.com>
The native timers IP block found on NVIDIA Tegra SoCs implements a
watchdog timer that can be used to recover from system hangs. Add the
device tree node on Tegra194.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 019f66f03a97..a0a5b44ff9bb 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -213,6 +213,23 @@ emc: external-memory-controller@2c60000 {
};
};
+ timer@3010000 {
+ compatible = "nvidia,tegra194-timer",
+ "nvidia,tegra186-timer";
+ reg = <0x03010000 0x000e0000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
uarta: serial@3100000 {
compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
reg = <0x03100000 0x40>;
--
2.24.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH v2 7/7] arm64: tegra: Enable native timers on Jetson AGX Xavier
2020-03-31 22:19 [PATCH v2 0/7] clocksource: Add NVIDIA Tegra186 timers support Thierry Reding
` (5 preceding siblings ...)
2020-03-31 22:19 ` [PATCH v2 6/7] arm64: tegra: Add native timer support on Tegra194 Thierry Reding
@ 2020-03-31 22:19 ` Thierry Reding
6 siblings, 0 replies; 14+ messages in thread
From: Thierry Reding @ 2020-03-31 22:19 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Thierry Reding
Cc: Rob Herring, Jon Hunter, devicetree, linux-tegra, linux-kernel
From: Thierry Reding <treding@nvidia.com>
Enable the native timers on Jetson AGX Xavier to allow using the
watchdog functionality to recover from system hangs, for example.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 623f7d7d216b..d68588f2709e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -52,6 +52,10 @@ memory-controller@2c00000 {
status = "okay";
};
+ timer@3010000 {
+ status = "okay";
+ };
+
serial@3110000 {
status = "okay";
};
--
2.24.1
^ permalink raw reply related [flat|nested] 14+ messages in thread