[PATCH AUTOSEL 5.6 001/149] net: hns3: drop the WQ_MEM_RECLAIM flag when allocating WQ

[PATCH AUTOSEL 5.6 001/149] net: hns3: drop the WQ_MEM_RECLAIM flag when allocating WQ

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 16deaef205b6da832f88a98770c55c8b85aaadfa ]

The WQ in hns3 driver is allocated with WQ_MEM_RECLAIM flag
in order to guarantee forward progress, which may cause hns3'
WQ_MEM_RECLAIM WQ flushing infiniband' !WQ_MEM_RECLAIM WQ
warning:

[11246.200168] hns3 0000:bd:00.1: Reset done, hclge driver initialization finished.
[11246.209979] hns3 0000:bd:00.1 eth7: net open
[11246.227608] ------------[ cut here ]------------
[11246.237370] workqueue: WQ_MEM_RECLAIM hclge:hclge_service_task [hclge] is flushing !WQ_MEM_RECLAIM infiniband:0x0
[11246.237391] WARNING: CPU: 50 PID: 2279 at ./kernel/workqueue.c:2605 check_flush_dependency+0xcc/0x140
[11246.260412] Modules linked in: hclgevf hns_roce_hw_v2 rdma_test(O) hns3 xt_CHECKSUM iptable_mangle xt_conntrack ipt_REJECT nf_reject_ipv4 ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bpfilter vfio_iommu_type1 vfio_pci vfio_virqfd vfio ib_isert iscsi_target_mod ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi aes_ce_blk crypto_simd cryptd aes_ce_cipher sunrpc nls_iso8859_1 crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce joydev input_leds hid_generic usbkbd usbmouse sbsa_gwdt usbhid usb_storage hid ses hclge hisi_zip hisi_hpre hisi_sec2 hnae3 hisi_qm ahci hisi_trng_v2 evbug uacce rng_core gpio_dwapb autofs4 hisi_sas_v3_hw megaraid_sas hisi_sas_main libsas scsi_transport_sas [last unloaded: hns_roce_hw_v2]
[11246.325742] CPU: 50 PID: 2279 Comm: kworker/50:0 Kdump: loaded Tainted: G           O      5.4.0-rc4+ #1
[11246.335181] Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B140.01 12/18/2019
[11246.344802] Workqueue: hclge hclge_service_task [hclge]
[11246.350007] pstate: 60c00009 (nZCv daif +PAN +UAO)
[11246.354779] pc : check_flush_dependency+0xcc/0x140
[11246.359549] lr : check_flush_dependency+0xcc/0x140
[11246.364317] sp : ffff800268a73990
[11246.367618] x29: ffff800268a73990 x28: 0000000000000001
[11246.372907] x27: ffffcbe4f5868000 x26: ffffcbe4f5541000
[11246.378196] x25: 00000000000000b8 x24: ffff002fdd0ff868
[11246.383483] x23: ffff002fdd0ff800 x22: ffff2027401ba600
[11246.388770] x21: 0000000000000000 x20: ffff002fdd0ff800
[11246.394059] x19: ffff202719293b00 x18: ffffcbe4f5541948
[11246.399347] x17: 000000006f8ad8dd x16: 0000000000000002
[11246.404634] x15: ffff8002e8a734f7 x14: 6c66207369205d65
[11246.409922] x13: 676c63685b206b73 x12: 61745f6563697672
[11246.415208] x11: 65735f65676c6368 x10: 3a65676c6368204d
[11246.420494] x9 : 49414c4345525f4d x8 : 6e6162696e69666e
[11246.425782] x7 : 69204d49414c4345 x6 : ffffcbe4f5765145
[11246.431068] x5 : 0000000000000000 x4 : 0000000000000000
[11246.436355] x3 : 0000000000000030 x2 : 00000000ffffffff
[11246.441642] x1 : 3349eb1ac5310100 x0 : 0000000000000000
[11246.446928] Call trace:
[11246.449363]  check_flush_dependency+0xcc/0x140
[11246.453785]  flush_workqueue+0x110/0x410
[11246.457691]  ib_cache_cleanup_one+0x54/0x468
[11246.461943]  __ib_unregister_device+0x70/0xa8
[11246.466279]  ib_unregister_device+0x2c/0x40
[11246.470455]  hns_roce_exit+0x34/0x198 [hns_roce_hw_v2]
[11246.475571]  __hns_roce_hw_v2_uninit_instance.isra.56+0x3c/0x58 [hns_roce_hw_v2]
[11246.482934]  hns_roce_hw_v2_reset_notify+0xd8/0x210 [hns_roce_hw_v2]
[11246.489261]  hclge_notify_roce_client+0x84/0xe0 [hclge]
[11246.494464]  hclge_reset_rebuild+0x60/0x730 [hclge]
[11246.499320]  hclge_reset_service_task+0x400/0x5a0 [hclge]
[11246.504695]  hclge_service_task+0x54/0x698 [hclge]
[11246.509464]  process_one_work+0x15c/0x458
[11246.513454]  worker_thread+0x144/0x520
[11246.517186]  kthread+0xfc/0x128
[11246.520314]  ret_from_fork+0x10/0x18
[11246.523873] ---[ end trace eb980723699c2585 ]---
[11246.528710] hns3 0000:bd:00.2: Func clear success after reset.
[11246.528747] hns3 0000:bd:00.0: Func clear success after reset.
[11246.907710] hns3 0000:bd:00.1 eth7: link up

According to [1] and [2]:

There seems to be no specific guidance about how to handling the
forward progress guarantee of network device's WQ yet, and other
network device's WQ seem to be marked with WQ_MEM_RECLAIM without
a clear reason.

So this patch removes the WQ_MEM_RECLAIM flag when allocating WQ
to aviod the above warning.

1. https://www.spinics.net/lists/netdev/msg631646.html
2. https://www.spinics.net/lists/netdev/msg632097.html

Fixes: 0ea68902256e ("net: hns3: allocate WQ with WQ_MEM_RECLAIM flag")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c   | 2 +-
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index d3b0cd74ecd23..b3518070306b1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -10666,7 +10666,7 @@ static int hclge_init(void)
 {
 	pr_info("%s is initializing\n", HCLGE_NAME);
 
-	hclge_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0, HCLGE_NAME);
+	hclge_wq = alloc_workqueue("%s", 0, 0, HCLGE_NAME);
 	if (!hclge_wq) {
 		pr_err("%s: failed to create workqueue\n", HCLGE_NAME);
 		return -ENOMEM;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 0510d85a7f6ae..3c58f0bbaebff 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -3188,7 +3188,7 @@ static int hclgevf_init(void)
 {
 	pr_info("%s is initializing\n", HCLGEVF_NAME);
 
-	hclgevf_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0, HCLGEVF_NAME);
+	hclgevf_wq = alloc_workqueue("%s", 0, 0, HCLGEVF_NAME);
 	if (!hclgevf_wq) {
 		pr_err("%s: failed to create workqueue\n", HCLGEVF_NAME);
 		return -ENOMEM;
-- 
2.20.1

[PATCH AUTOSEL 5.6 002/149] net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 63b903dfebdea92aa92ad337d8451a6fbfeabf9d ]

As far as I understood from the Kconfig help text, this build rule is
used to rebuild the driver firmware, which runs on an old m68k-based
chip. So, you need m68k tools for the firmware rebuild.

wanxl.c is a PCI driver, but CONFIG_M68K does not select CONFIG_HAVE_PCI.
So, you cannot enable CONFIG_WANXL_BUILD_FIRMWARE for ARCH=m68k. In other
words, ifeq ($(ARCH),m68k) is false here.

I am keeping the dead code for now, but rebuilding the firmware requires
'as68k' and 'ld68k', which I do not have in hand.

Instead, the kernel.org m68k GCC [1] successfully built it.

Allowing a user to pass in CROSS_COMPILE_M68K= is handier.

[1] https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/9.2.0/x86_64-gcc-9.2.0-nolibc-m68k-linux.tar.xz

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/Kconfig  |  2 +-
 drivers/net/wan/Makefile | 12 ++++++------
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 4530840e15efb..dbc0e3f7a3e2d 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -200,7 +200,7 @@ config WANXL_BUILD_FIRMWARE
 	depends on WANXL && !PREVENT_FIRMWARE_BUILD
 	help
 	  Allows you to rebuild firmware run by the QUICC processor.
-	  It requires as68k, ld68k and hexdump programs.
+	  It requires m68k toolchains and hexdump programs.
 
 	  You should never need this option, say N.
 
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 701f5d2fe3b61..995277c657a1e 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -40,17 +40,17 @@ $(obj)/wanxl.o:	$(obj)/wanxlfw.inc
 
 ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
 ifeq ($(ARCH),m68k)
-  AS68K = $(AS)
-  LD68K = $(LD)
+  M68KAS = $(AS)
+  M68KLD = $(LD)
 else
-  AS68K = as68k
-  LD68K = ld68k
+  M68KAS = $(CROSS_COMPILE_M68K)as
+  M68KLD = $(CROSS_COMPILE_M68K)ld
 endif
 
 quiet_cmd_build_wanxlfw = BLD FW  $@
       cmd_build_wanxlfw = \
-	$(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(AS68K) -m68360 -o $(obj)/wanxlfw.o; \
-	$(LD68K) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
+	$(CPP) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi $< | $(M68KAS) -m68360 -o $(obj)/wanxlfw.o; \
+	$(M68KLD) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
 	hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x  ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
 	rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 003/149] netfilter: ctnetlink: be more strict when NF_CONNTRACK_MARK is not set

[Sasha Levin]

From: Romain Bellan <romain.bellan@wifirst.fr>

[ Upstream commit 7c6b4121627aeaa79536fbb900feafec740410d3 ]

When CONFIG_NF_CONNTRACK_MARK is not set, any CTA_MARK or CTA_MARK_MASK
in netlink message are not supported. We should return an error when one
of them is set, not both

Fixes: 9306425b70bf ("netfilter: ctnetlink: must check mark attributes vs NULL")
Signed-off-by: Romain Bellan <romain.bellan@wifirst.fr>
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_netlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 6a1c8f1f61718..7f5258ae1218a 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -860,7 +860,7 @@ ctnetlink_alloc_filter(const struct nlattr * const cda[], u8 family)
 	struct ctnetlink_filter *filter;
 
 #ifndef CONFIG_NF_CONNTRACK_MARK
-	if (cda[CTA_MARK] && cda[CTA_MARK_MASK])
+	if (cda[CTA_MARK] || cda[CTA_MARK_MASK])
 		return ERR_PTR(-EOPNOTSUPP);
 #endif
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 004/149] net: axienet: Convert DMA error handler to a work queue

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 24201a64770afe2e17050b2ab9e8c0e24e9c23b2 ]

The DMA error handler routine is currently a tasklet, scheduled to run
after the DMA error IRQ was handled.
However it needs to take the MDIO mutex, which is not allowed to do in a
tasklet. A kernel (with debug options) complains consequently:
[  614.050361] net eth0: DMA Tx error 0x174019
[  614.064002] net eth0: Current BD is at: 0x8f84aa0ce
[  614.080195] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935
[  614.109484] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 40, name: kworker/u4:4
[  614.135428] 3 locks held by kworker/u4:4/40:
[  614.149075]  #0: ffff000879863328 ((wq_completion)rpciod){....}, at: process_one_work+0x1f0/0x6a8
[  614.177528]  #1: ffff80001251bdf8 ((work_completion)(&task->u.tk_work)){....}, at: process_one_work+0x1f0/0x6a8
[  614.209033]  #2: ffff0008784e0110 (sk_lock-AF_INET-RPC){....}, at: tcp_sendmsg+0x24/0x58
[  614.235429] CPU: 0 PID: 40 Comm: kworker/u4:4 Not tainted 5.6.0-rc3-00926-g4a165a9d5921 #26
[  614.260854] Hardware name: ARM Test FPGA (DT)
[  614.274734] Workqueue: rpciod rpc_async_schedule
[  614.289022] Call trace:
[  614.296871]  dump_backtrace+0x0/0x1a0
[  614.308311]  show_stack+0x14/0x20
[  614.318751]  dump_stack+0xbc/0x100
[  614.329403]  ___might_sleep+0xf0/0x140
[  614.341018]  __might_sleep+0x4c/0x80
[  614.352201]  __mutex_lock+0x5c/0x8a8
[  614.363348]  mutex_lock_nested+0x1c/0x28
[  614.375654]  axienet_dma_err_handler+0x38/0x388
[  614.389999]  tasklet_action_common.isra.15+0x160/0x1a8
[  614.405894]  tasklet_action+0x24/0x30
[  614.417297]  efi_header_end+0xe0/0x494
[  614.429020]  irq_exit+0xd0/0xd8
[  614.439047]  __handle_domain_irq+0x60/0xb0
[  614.451877]  gic_handle_irq+0xdc/0x2d0
[  614.463486]  el1_irq+0xcc/0x180
[  614.473451]  __tcp_transmit_skb+0x41c/0xb58
[  614.486513]  tcp_write_xmit+0x224/0x10a0
[  614.498792]  __tcp_push_pending_frames+0x38/0xc8
[  614.513126]  tcp_rcv_established+0x41c/0x820
[  614.526301]  tcp_v4_do_rcv+0x8c/0x218
[  614.537784]  __release_sock+0x5c/0x108
[  614.549466]  release_sock+0x34/0xa0
[  614.560318]  tcp_sendmsg+0x40/0x58
[  614.571053]  inet_sendmsg+0x40/0x68
[  614.582061]  sock_sendmsg+0x18/0x30
[  614.593074]  xs_sendpages+0x218/0x328
[  614.604506]  xs_tcp_send_request+0xa0/0x1b8
[  614.617461]  xprt_transmit+0xc8/0x4f0
[  614.628943]  call_transmit+0x8c/0xa0
[  614.640028]  __rpc_execute+0xbc/0x6f8
[  614.651380]  rpc_async_schedule+0x28/0x48
[  614.663846]  process_one_work+0x298/0x6a8
[  614.676299]  worker_thread+0x40/0x490
[  614.687687]  kthread+0x134/0x138
[  614.697804]  ret_from_fork+0x10/0x18
[  614.717319] xilinx_axienet 7fe00000.ethernet eth0: Link is Down
[  615.748343] xilinx_axienet 7fe00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off

Since tasklets are not really popular anymore anyway, lets convert this
over to a work queue, which can sleep and thus can take the MDIO mutex.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/xilinx_axienet.h  |  2 +-
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 24 +++++++++----------
 2 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 2dacfc85b3baa..04e51af32178c 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -435,7 +435,7 @@ struct axienet_local {
 	void __iomem *regs;
 	void __iomem *dma_regs;
 
-	struct tasklet_struct dma_err_tasklet;
+	struct work_struct dma_err_task;
 
 	int tx_irq;
 	int rx_irq;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 20746b8019596..7cebd5150bec4 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -806,7 +806,7 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev)
 		/* Write to the Rx channel control register */
 		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
 
-		tasklet_schedule(&lp->dma_err_tasklet);
+		schedule_work(&lp->dma_err_task);
 		axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status);
 	}
 out:
@@ -855,7 +855,7 @@ static irqreturn_t axienet_rx_irq(int irq, void *_ndev)
 		/* write to the Rx channel control register */
 		axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr);
 
-		tasklet_schedule(&lp->dma_err_tasklet);
+		schedule_work(&lp->dma_err_task);
 		axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status);
 	}
 out:
@@ -891,7 +891,7 @@ static irqreturn_t axienet_eth_irq(int irq, void *_ndev)
 	return IRQ_HANDLED;
 }
 
-static void axienet_dma_err_handler(unsigned long data);
+static void axienet_dma_err_handler(struct work_struct *work);
 
 /**
  * axienet_open - Driver open routine.
@@ -935,9 +935,8 @@ static int axienet_open(struct net_device *ndev)
 
 	phylink_start(lp->phylink);
 
-	/* Enable tasklets for Axi DMA error handling */
-	tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler,
-		     (unsigned long) lp);
+	/* Enable worker thread for Axi DMA error handling */
+	INIT_WORK(&lp->dma_err_task, axienet_dma_err_handler);
 
 	/* Enable interrupts for Axi DMA Tx */
 	ret = request_irq(lp->tx_irq, axienet_tx_irq, IRQF_SHARED,
@@ -966,7 +965,7 @@ static int axienet_open(struct net_device *ndev)
 err_tx_irq:
 	phylink_stop(lp->phylink);
 	phylink_disconnect_phy(lp->phylink);
-	tasklet_kill(&lp->dma_err_tasklet);
+	cancel_work_sync(&lp->dma_err_task);
 	dev_err(lp->dev, "request_irq() failed\n");
 	return ret;
 }
@@ -1025,7 +1024,7 @@ static int axienet_stop(struct net_device *ndev)
 	axienet_mdio_enable(lp);
 	mutex_unlock(&lp->mii_bus->mdio_lock);
 
-	tasklet_kill(&lp->dma_err_tasklet);
+	cancel_work_sync(&lp->dma_err_task);
 
 	if (lp->eth_irq > 0)
 		free_irq(lp->eth_irq, ndev);
@@ -1503,17 +1502,18 @@ static const struct phylink_mac_ops axienet_phylink_ops = {
 };
 
 /**
- * axienet_dma_err_handler - Tasklet handler for Axi DMA Error
- * @data:	Data passed
+ * axienet_dma_err_handler - Work queue task for Axi DMA Error
+ * @work:	pointer to work_struct
  *
  * Resets the Axi DMA and Axi Ethernet devices, and reconfigures the
  * Tx/Rx BDs.
  */
-static void axienet_dma_err_handler(unsigned long data)
+static void axienet_dma_err_handler(struct work_struct *work)
 {
 	u32 axienet_status;
 	u32 cr, i;
-	struct axienet_local *lp = (struct axienet_local *) data;
+	struct axienet_local *lp = container_of(work, struct axienet_local,
+						dma_err_task);
 	struct net_device *ndev = lp->ndev;
 	struct axidma_bd *cur_p;
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 005/149] net: phy: probe PHY drivers synchronously

[Sasha Levin]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 16983507742cbcaa5592af530872a82e82fb9c51 ]

If we have scenarios like

mdiobus_register()
	-> loads PHY driver module(s)
	-> registers PHY driver(s)
	-> may schedule async probe
phydev = mdiobus_get_phy()
<phydev action involving PHY driver>

or

phydev = phy_device_create()
	-> loads PHY driver module
	-> registers PHY driver
	-> may schedule async probe
<phydev action involving PHY driver>

then we expect the PHY driver to be bound to the phydev when triggering
the action. This may not be the case in case of asynchronous probing.
Therefore ensure that PHY drivers are probed synchronously.

Default still is sync probing, except async probing is explicitly
requested. I saw some comments that the intention is to promote
async probing for more parallelism in boot process and want to be
prepared for the case that the default is changed to async probing.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 28e3c5c0e3c30..0f7003087e19a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2571,6 +2571,7 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
 	new_driver->mdiodrv.driver.probe = phy_probe;
 	new_driver->mdiodrv.driver.remove = phy_remove;
 	new_driver->mdiodrv.driver.owner = owner;
+	new_driver->mdiodrv.driver.probe_type = PROBE_FORCE_SYNCHRONOUS;
 
 	retval = driver_register(&new_driver->mdiodrv.driver);
 	if (retval) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 006/149] RDMA/rxe: Set sys_image_guid to be aligned with HW IB devices

[Sasha Levin]

From: Zhu Yanjun <yanjunz@mellanox.com>

[ Upstream commit d0ca2c35dd15a3d989955caec02beea02f735ee6 ]

The RXE driver doesn't set sys_image_guid and user space applications see
zeros. This causes to pyverbs tests to fail with the following traceback,
because the IBTA spec requires to have valid sys_image_guid.

 Traceback (most recent call last):
   File "./tests/test_device.py", line 51, in test_query_device
     self.verify_device_attr(attr)
   File "./tests/test_device.py", line 74, in verify_device_attr
     assert attr.sys_image_guid != 0

In order to fix it, set sys_image_guid to be equal to node_guid.

Before:
 5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid
 0000:0000:0000:0000

After:
 5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid
 5054:00ff:feaa:5363

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200323112800.1444784-1-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c
index 0946a301a5c5d..4afdd2e208839 100644
--- a/drivers/infiniband/sw/rxe/rxe.c
+++ b/drivers/infiniband/sw/rxe/rxe.c
@@ -103,6 +103,8 @@ static void rxe_init_device_param(struct rxe_dev *rxe)
 	rxe->attr.max_fast_reg_page_list_len	= RXE_MAX_FMR_PAGE_LIST_LEN;
 	rxe->attr.max_pkeys			= RXE_MAX_PKEYS;
 	rxe->attr.local_ca_ack_delay		= RXE_LOCAL_CA_ACK_DELAY;
+	addrconf_addr_eui48((unsigned char *)&rxe->attr.sys_image_guid,
+			rxe->ndev->dev_addr);
 
 	rxe->max_ucontext			= RXE_MAX_UCONTEXT;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 007/149] mmc: sdhci-esdhc-imx: restore pin state when resume back

[Sasha Levin]

From: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit af8fade4bd7bc7bf49851832a20166213e032978 ]

In some low power mode, SoC will lose the pin state, so need to restore
the pin state when resume back.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/1582100757-20683-8-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 382f25b2fa458..8d5e7d5e669af 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1617,7 +1617,11 @@ static int sdhci_esdhc_suspend(struct device *dev)
 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
 		mmc_retune_needed(host->mmc);
 
-	return sdhci_suspend_host(host);
+	ret = sdhci_suspend_host(host);
+	if (!ret)
+		return pinctrl_pm_select_sleep_state(dev);
+
+	return ret;
 }
 
 static int sdhci_esdhc_resume(struct device *dev)
@@ -1625,6 +1629,10 @@ static int sdhci_esdhc_resume(struct device *dev)
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	int ret;
 
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret)
+		return ret;
+
 	/* re-initialize hw state in case it's lost in low power mode */
 	sdhci_esdhc_imx_hwinit(host);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 008/149] mmc: sdhci: do not enable card detect interrupt for gpio cd type

[Sasha Levin]

From: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit e65bb38824711559844ba932132f417bc5a355e2 ]

Except SDHCI_QUIRK_BROKEN_CARD_DETECTION and MMC_CAP_NONREMOVABLE,
we also do not need to handle controller native card detect interrupt
for gpio cd type.
If we wrong enabled the card detect interrupt for gpio case, it will
cause a lot of unexpected card detect interrupts during data transfer
which should not happen.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/1582100563-20555-2-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 63db84481dff2..d94759d7392d5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -153,7 +153,7 @@ static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
 	u32 present;
 
 	if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
-	    !mmc_card_is_removable(host->mmc))
+	    !mmc_card_is_removable(host->mmc) || mmc_can_gpio_cd(host->mmc))
 		return;
 
 	if (enable) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 009/149] serial: 8250_omap: Fix sleeping function called from invalid context during probe

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit 4ce35a3617c0ac758c61122b2218b6c8c9ac9398 ]

When booting j721e the following bug is printed:

[    1.154821] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
[    1.154827] in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 12, name: kworker/0:1
[    1.154832] 3 locks held by kworker/0:1/12:
[    1.154836]  #0: ffff000840030728 ((wq_completion)events){+.+.}, at: process_one_work+0x1d4/0x6e8
[    1.154852]  #1: ffff80001214fdd8 (deferred_probe_work){+.+.}, at: process_one_work+0x1d4/0x6e8
[    1.154860]  #2: ffff00084060b170 (&dev->mutex){....}, at: __device_attach+0x38/0x138
[    1.154872] irq event stamp: 63096
[    1.154881] hardirqs last  enabled at (63095): [<ffff800010b74318>] _raw_spin_unlock_irqrestore+0x70/0x78
[    1.154887] hardirqs last disabled at (63096): [<ffff800010b740d8>] _raw_spin_lock_irqsave+0x28/0x80
[    1.154893] softirqs last  enabled at (62254): [<ffff800010080c88>] _stext+0x488/0x564
[    1.154899] softirqs last disabled at (62247): [<ffff8000100fdb3c>] irq_exit+0x114/0x140
[    1.154906] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.0-rc6-next-20200318-00094-g45e4089b0bd3 #221
[    1.154911] Hardware name: Texas Instruments K3 J721E SoC (DT)
[    1.154917] Workqueue: events deferred_probe_work_func
[    1.154923] Call trace:
[    1.154928]  dump_backtrace+0x0/0x190
[    1.154933]  show_stack+0x14/0x20
[    1.154940]  dump_stack+0xe0/0x148
[    1.154946]  ___might_sleep+0x150/0x1f0
[    1.154952]  __might_sleep+0x4c/0x80
[    1.154957]  wait_for_completion_timeout+0x40/0x140
[    1.154964]  ti_sci_set_device_state+0xa0/0x158
[    1.154969]  ti_sci_cmd_get_device_exclusive+0x14/0x20
[    1.154977]  ti_sci_dev_start+0x34/0x50
[    1.154984]  genpd_runtime_resume+0x78/0x1f8
[    1.154991]  __rpm_callback+0x3c/0x140
[    1.154996]  rpm_callback+0x20/0x80
[    1.155001]  rpm_resume+0x568/0x758
[    1.155007]  __pm_runtime_resume+0x44/0xb0
[    1.155013]  omap8250_probe+0x2b4/0x508
[    1.155019]  platform_drv_probe+0x50/0xa0
[    1.155023]  really_probe+0xd4/0x318
[    1.155028]  driver_probe_device+0x54/0xe8
[    1.155033]  __device_attach_driver+0x80/0xb8
[    1.155039]  bus_for_each_drv+0x74/0xc0
[    1.155044]  __device_attach+0xdc/0x138
[    1.155049]  device_initial_probe+0x10/0x18
[    1.155053]  bus_probe_device+0x98/0xa0
[    1.155058]  deferred_probe_work_func+0x74/0xb0
[    1.155063]  process_one_work+0x280/0x6e8
[    1.155068]  worker_thread+0x48/0x430
[    1.155073]  kthread+0x108/0x138
[    1.155079]  ret_from_fork+0x10/0x18

To fix the bug we need to first call pm_runtime_enable() prior to any
pm_runtime calls.

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200320125200.6772-1-peter.ujfalusi@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_omap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 6f343ca08440f..c066cf37778f8 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1231,6 +1231,7 @@ static int omap8250_probe(struct platform_device *pdev)
 	spin_lock_init(&priv->rx_dma_lock);
 
 	device_init_wakeup(&pdev->dev, true);
+	pm_runtime_enable(&pdev->dev);
 	pm_runtime_use_autosuspend(&pdev->dev);
 
 	/*
@@ -1244,7 +1245,6 @@ static int omap8250_probe(struct platform_device *pdev)
 		pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
 
 	pm_runtime_irq_safe(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
 
 	pm_runtime_get_sync(&pdev->dev);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 010/149] drm/amd/display: differentiate vsc sdp colorimetry use criteria between MST and SST

[Sasha Levin]

From: Martin Tsai <martin.tsai@amd.com>

[ Upstream commit c38cc6770fd5f78a0918ed0b01af14de31aba5cb ]

[Why]
We should check MST BU support capability on output port before building
vsc info packet.

[How]
Add a new definition for port and sink capability check.

Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 19 +++++++++++++++---
 drivers/gpu/drm/amd/display/dc/dc.h           |  2 ++
 .../amd/display/modules/inc/mod_info_packet.h |  3 +--
 .../display/modules/info_packet/info_packet.c | 20 +++----------------
 4 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 6240259b3a937..b9853fd724d60 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -4200,9 +4200,22 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector,
 			struct dmcu *dmcu = core_dc->res_pool->dmcu;
 
 			stream->psr_version = dmcu->dmcu_version.psr_version;
-			mod_build_vsc_infopacket(stream,
-					&stream->vsc_infopacket,
-					&stream->use_vsc_sdp_for_colorimetry);
+
+			//
+			// should decide stream support vsc sdp colorimetry capability
+			// before building vsc info packet
+			//
+			stream->use_vsc_sdp_for_colorimetry = false;
+			if (aconnector->dc_sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
+				stream->use_vsc_sdp_for_colorimetry =
+					aconnector->dc_sink->is_vsc_sdp_colorimetry_supported;
+			} else {
+				if (stream->link->dpcd_caps.dpcd_rev.raw >= 0x14 &&
+					stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED) {
+					stream->use_vsc_sdp_for_colorimetry = true;
+				}
+			}
+			mod_build_vsc_infopacket(stream, &stream->vsc_infopacket);
 		}
 	}
 finish:
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 8ff25b5dd2f6d..4afe33c6aeb5b 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -1019,6 +1019,8 @@ struct dc_sink {
 
 	struct dc_sink_dsc_caps sink_dsc_caps;
 
+	bool is_vsc_sdp_colorimetry_supported;
+
 	/* private to DC core */
 	struct dc_link *link;
 	struct dc_context *ctx;
diff --git a/drivers/gpu/drm/amd/display/modules/inc/mod_info_packet.h b/drivers/gpu/drm/amd/display/modules/inc/mod_info_packet.h
index 42cbeffac6402..13c57ff2abdce 100644
--- a/drivers/gpu/drm/amd/display/modules/inc/mod_info_packet.h
+++ b/drivers/gpu/drm/amd/display/modules/inc/mod_info_packet.h
@@ -34,8 +34,7 @@ struct dc_info_packet;
 struct mod_vrr_params;
 
 void mod_build_vsc_infopacket(const struct dc_stream_state *stream,
-		struct dc_info_packet *info_packet,
-		bool *use_vsc_sdp_for_colorimetry);
+		struct dc_info_packet *info_packet);
 
 void mod_build_hf_vsif_infopacket(const struct dc_stream_state *stream,
 		struct dc_info_packet *info_packet, int ALLMEnabled, int ALLMValue);
diff --git a/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c b/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c
index 6a8a056424b85..cff3ab15fc0cc 100644
--- a/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c
+++ b/drivers/gpu/drm/amd/display/modules/info_packet/info_packet.c
@@ -130,8 +130,7 @@ enum ColorimetryYCCDP {
 };
 
 void mod_build_vsc_infopacket(const struct dc_stream_state *stream,
-		struct dc_info_packet *info_packet,
-		bool *use_vsc_sdp_for_colorimetry)
+		struct dc_info_packet *info_packet)
 {
 	unsigned int vsc_packet_revision = vsc_packet_undefined;
 	unsigned int i;
@@ -139,11 +138,6 @@ void mod_build_vsc_infopacket(const struct dc_stream_state *stream,
 	unsigned int colorimetryFormat = 0;
 	bool stereo3dSupport = false;
 
-	/* Initialize first, later if infopacket is valid determine if VSC SDP
-	 * should be used to signal colorimetry format and pixel encoding.
-	 */
-	*use_vsc_sdp_for_colorimetry = false;
-
 	if (stream->timing.timing_3d_format != TIMING_3D_FORMAT_NONE && stream->view_format != VIEW_3D_FORMAT_NONE) {
 		vsc_packet_revision = vsc_packet_rev1;
 		stereo3dSupport = true;
@@ -153,9 +147,8 @@ void mod_build_vsc_infopacket(const struct dc_stream_state *stream,
 	if (stream->psr_version != 0)
 		vsc_packet_revision = vsc_packet_rev2;
 
-	/* Update to revision 5 for extended colorimetry support for DPCD 1.4+ */
-	if (stream->link->dpcd_caps.dpcd_rev.raw >= 0x14 &&
-			stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED)
+	/* Update to revision 5 for extended colorimetry support */
+	if (stream->use_vsc_sdp_for_colorimetry)
 		vsc_packet_revision = vsc_packet_rev5;
 
 	/* VSC packet not needed based on the features
@@ -269,13 +262,6 @@ void mod_build_vsc_infopacket(const struct dc_stream_state *stream,
 
 		info_packet->valid = true;
 
-		/* If we are using VSC SDP revision 05h, use this to signal for
-		 * colorimetry format and pixel encoding. HW should later be
-		 * programmed to set MSA MISC1 bit 6 to indicate ignore
-		 * colorimetry format and pixel encoding in the MSA.
-		 */
-		*use_vsc_sdp_for_colorimetry = true;
-
 		/* Set VSC SDP fields for pixel encoding and colorimetry format from DP 1.3 specs
 		 * Data Bytes DB 18~16
 		 * Bits 3:0 (Colorimetry Format)        |  Bits 7:4 (Pixel Encoding)
-- 
2.20.1

[PATCH AUTOSEL 5.6 011/149] ionic: check for NULL structs on teardown

[Sasha Levin]

From: Shannon Nelson <snelson@pensando.io>

[ Upstream commit a4674f34711b96b65bdc4d54eca88d2fd123bbc6 ]

Make sure the queue structs exist before trying to tear
them down to make for safer error recovery.

Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/pensando/ionic/ionic_lif.c   | 26 ++++++++++---------
 .../net/ethernet/pensando/ionic/ionic_main.c  |  7 ++++-
 2 files changed, 20 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
index 938e19ee0bcd2..1a569d9b0c3a0 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
@@ -318,19 +318,21 @@ static void ionic_qcqs_free(struct ionic_lif *lif)
 		lif->adminqcq = NULL;
 	}
 
-	for (i = 0; i < lif->nxqs; i++)
-		if (lif->rxqcqs[i].stats)
-			devm_kfree(dev, lif->rxqcqs[i].stats);
-
-	devm_kfree(dev, lif->rxqcqs);
-	lif->rxqcqs = NULL;
-
-	for (i = 0; i < lif->nxqs; i++)
-		if (lif->txqcqs[i].stats)
-			devm_kfree(dev, lif->txqcqs[i].stats);
+	if (lif->rxqcqs) {
+		for (i = 0; i < lif->nxqs; i++)
+			if (lif->rxqcqs[i].stats)
+				devm_kfree(dev, lif->rxqcqs[i].stats);
+		devm_kfree(dev, lif->rxqcqs);
+		lif->rxqcqs = NULL;
+	}
 
-	devm_kfree(dev, lif->txqcqs);
-	lif->txqcqs = NULL;
+	if (lif->txqcqs) {
+		for (i = 0; i < lif->nxqs; i++)
+			if (lif->txqcqs[i].stats)
+				devm_kfree(dev, lif->txqcqs[i].stats);
+		devm_kfree(dev, lif->txqcqs);
+		lif->txqcqs = NULL;
+	}
 }
 
 static void ionic_link_qcq_interrupts(struct ionic_qcq *src_qcq,
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_main.c b/drivers/net/ethernet/pensando/ionic/ionic_main.c
index a8e3fb73b4650..ee690f8f381ca 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_main.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_main.c
@@ -240,11 +240,16 @@ static void ionic_adminq_cb(struct ionic_queue *q,
 
 static int ionic_adminq_post(struct ionic_lif *lif, struct ionic_admin_ctx *ctx)
 {
-	struct ionic_queue *adminq = &lif->adminqcq->q;
+	struct ionic_queue *adminq;
 	int err = 0;
 
 	WARN_ON(in_interrupt());
 
+	if (!lif->adminqcq)
+		return -EIO;
+
+	adminq = &lif->adminqcq->q;
+
 	spin_lock(&lif->adminq_lock);
 	if (!ionic_q_has_space(adminq, 1)) {
 		err = -ENOSPC;
-- 
2.20.1

[PATCH AUTOSEL 5.6 012/149] net: phy: mscc: accept all RGMII species in vsc85xx_mac_if_set

[Sasha Levin]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit da206d65f2b293274f8082a26da4e43a1610da54 ]

The helper for configuring the pinout of the MII side of the PHY should
do so irrespective of whether RGMII delays are used or not. So accept
the ID, TXID and RXID variants as well, not just the no-delay RGMII
variant.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mscc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index f686f40f6bdcc..57e6b1f64db72 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -910,6 +910,9 @@ static int vsc85xx_mac_if_set(struct phy_device *phydev,
 	reg_val = phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_1);
 	reg_val &= ~(MAC_IF_SELECTION_MASK);
 	switch (interface) {
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII:
 		reg_val |= (MAC_IF_SELECTION_RGMII << MAC_IF_SELECTION_POS);
 		break;
-- 
2.20.1

[PATCH AUTOSEL 5.6 013/149] tools/power/x86/intel-speed-select: Fix mailbox usage for CLOS_PM_QOS_CONFIG

[Sasha Levin]

From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

[ Upstream commit 8ddbda76245f5d10e00020db34455404019efc91 ]

Even for the products using MMIO, this message needs to be sent via
mail box. The previous fix done for this didn't properly address this.
That fix simply removed sending command via MMIO, but still didn't
trigger sending via mailbox.

Add additional condition to check for CLOS_PM_QOS_CONFIG, when MMIO
is supported on a platform.

Fixes: cd0e63706549 (tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG)
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/intel-speed-select/isst-config.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/power/x86/intel-speed-select/isst-config.c b/tools/power/x86/intel-speed-select/isst-config.c
index 2b2b8167c65be..6a973e7832228 100644
--- a/tools/power/x86/intel-speed-select/isst-config.c
+++ b/tools/power/x86/intel-speed-select/isst-config.c
@@ -571,7 +571,8 @@ int isst_send_mbox_command(unsigned int cpu, unsigned char command,
 		"mbox_send: cpu:%d command:%x sub_command:%x parameter:%x req_data:%x\n",
 		cpu, command, sub_command, parameter, req_data);
 
-	if (isst_platform_info.mmio_supported && command == CONFIG_CLOS) {
+	if (isst_platform_info.mmio_supported && command == CONFIG_CLOS &&
+	    sub_command != CLOS_PM_QOS_CONFIG) {
 		unsigned int value;
 		int write = 0;
 		int clos_id, core_id, ret = 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 014/149] platform/x86: asus_wmi: Fix return value of fan_boost_mode_store

[Sasha Levin]

From: Leonid Maksymchuk <leonmaxx@gmail.com>

[ Upstream commit edeee341fd6c1099de357c517af215bee2c6f766 ]

Function fan_boost_mode_store returns 0 if store is successful,
this leads to infinite loop after any write to it's sysfs entry:

# echo 0 >/sys/devices/platform/asus-nb-wmi/fan_boost_mode

This command never ends, one CPU core is at 100% utilization.
This patch fixes this by returning size of written data.

Fixes: b096f626a682 ("platform/x86: asus-wmi: Switch fan boost mode")
Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/asus-wmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 612ef55262268..e5d35987c048a 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -1719,7 +1719,7 @@ static ssize_t fan_boost_mode_store(struct device *dev,
 	asus->fan_boost_mode = new_mode;
 	fan_boost_mode_write(asus);
 
-	return result;
+	return count;
 }
 
 // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
-- 
2.20.1

[PATCH AUTOSEL 5.6 015/149] drm/amd/display: Explicitly disable triplebuffer flips

[Sasha Levin]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit 2d673560b7b83f8fe4163610f35c51b4d095525c ]

[Why]
This is enabled by default on Renoir but there's userspace/API support
to actually make use of this.

Since we're not passing this down through surface updates, let's
explicitly disable this for now.

This fixes "dcn20_program_front_end_for_ctx" warnings associated with
incorrect/unexpected programming sequences performed while this is
enabled.

[How]
Disable it at the topmost level in DM in case anyone tries to flip this
to enabled for any of the other ASICs like Navi10/14.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index b9853fd724d60..f2850f5b0808c 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2909,6 +2909,9 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev)
 	if (adev->asic_type != CHIP_CARRIZO && adev->asic_type != CHIP_STONEY)
 		dm->dc->debug.disable_stutter = amdgpu_pp_feature_mask & PP_STUTTER_MODE ? false : true;
 
+	/* No userspace support. */
+	dm->dc->debug.disable_tri_buf = true;
+
 	return 0;
 fail:
 	kfree(aencoder);
-- 
2.20.1

[PATCH AUTOSEL 5.6 016/149] drm/amd/display: Fix test pattern color space inconsistency for Linux

[Sasha Levin]

From: "Jerry (Fangzhi) Zuo" <Jerry.Zuo@amd.com>

[ Upstream commit ef65c702d40637ed9ee25edc8e8a994168a32377 ]

[why]
When reprogram MSA with updated color space, the test color space shows
inconsistency. Linux has separate routine to set up test pattern color
space, but it fails to configure RGB.

[How]
Add RGB to test pattern.

Fixes: 43563bc2e6a769 ("drm/amd/display: update MSA and VSC SDP on video test pattern request")
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index fd9e69634c50a..f01bc378a51ee 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -2654,9 +2654,12 @@ static void dp_test_send_link_test_pattern(struct dc_link *link)
 	break;
 	}
 
-	test_pattern_color_space = dpcd_test_params.bits.YCBCR_COEFS ?
-			DP_TEST_PATTERN_COLOR_SPACE_YCBCR709 :
-			DP_TEST_PATTERN_COLOR_SPACE_YCBCR601;
+	if (dpcd_test_params.bits.CLR_FORMAT == 0)
+		test_pattern_color_space = DP_TEST_PATTERN_COLOR_SPACE_RGB;
+	else
+		test_pattern_color_space = dpcd_test_params.bits.YCBCR_COEFS ?
+				DP_TEST_PATTERN_COLOR_SPACE_YCBCR709 :
+				DP_TEST_PATTERN_COLOR_SPACE_YCBCR601;
 
 	dc_link_dp_set_test_pattern(
 			link,
-- 
2.20.1

[PATCH AUTOSEL 5.6 017/149] ath11k: Adding proper validation before accessing tx_stats

[Sasha Levin]

From: Pravas Kumar Panda <kumarpan@codeaurora.org>

[ Upstream commit fe0ebb51604f190b13b20a5f6c2821772c0cfc22 ]

Before dumping tx_stats proper validation was not been taken care of.
Due to which we were encountering null pointer dereference(kernel panic).
This scenario will arise when a station is getting disconnected and
we are changing the STA state by ath11k_mac_op_sta_state and assigning
tx_stats as NULL and after this the mac80211 will destroy the
debugfs entry from where we are trying to read the stats.

If anyone tries to dump tx_stats for that STA in between setting
tx_stats to NULL and debugfs file removal without checking the NULL
value it will run into a NULL pointer exception.

Proceeding with the analysis of "ARM Kernel Panic".
The APSS crash happened due to OOPS on CPU 3.
Crash Signature : Unable to handle kernel NULL pointer dereference at
virtual address 00000360
During the crash,
PC points to "ath11k_debug_htt_stats_init+0x16ac/0x1acc [ath11k]"
LR points to "ath11k_debug_htt_stats_init+0x1688/0x1acc [ath11k]".
The Backtrace obtained is as follows:
[<ffffffbffcfd8590>] ath11k_debug_htt_stats_init+0x16ac/0x1acc [ath11k]
[<ffffffc000156320>] do_loop_readv_writev+0x60/0xa4
[<ffffffc000156a5c>] do_readv_writev+0xd8/0x19c
[<ffffffc000156b54>] vfs_readv+0x34/0x48
[<ffffffc00017d6f4>] default_file_splice_read+0x1a8/0x2e4
[<ffffffc00017c56c>] do_splice_to+0x78/0x98
[<ffffffc00017c63c>] splice_direct_to_actor+0xb0/0x1a4
[<ffffffc00017c7b4>] do_splice_direct+0x84/0xa8
[<ffffffc000156f40>] do_sendfile+0x160/0x2a4
[<ffffffc000157980>] SyS_sendfile64+0xb4/0xc8

Signed-off-by: Pravas Kumar Panda <kumarpan@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/debugfs_sta.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/debugfs_sta.c b/drivers/net/wireless/ath/ath11k/debugfs_sta.c
index 743760c9bcae4..e52f3b079bacc 100644
--- a/drivers/net/wireless/ath/ath11k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath11k/debugfs_sta.c
@@ -219,6 +219,9 @@ static ssize_t ath11k_dbg_sta_dump_tx_stats(struct file *file,
 	const int size = 2 * 4096;
 	char *buf;
 
+	if (!arsta->tx_stats)
+		return -ENOENT;
+
 	buf = kzalloc(size, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
-- 
2.20.1

[PATCH AUTOSEL 5.6 018/149] HID: lg-g15: Do not fail the probe when we fail to disable F# emulation

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit b8a75eaddae9410767c7d95a1c5f3a547aae7b81 ]

By default the G1-G12 keys on the Logitech gaming keyboards send
F1 - F12 when in "generic HID" mode.

The first thing the hid-lg-g15 driver does is disable this behavior.

We have received a bugreport that this does not work when the keyboard
is connected through an Aten KVM switch. Using a gaming keyboard with
a KVM is a bit weird setup, but still we can try to fail a bit more
gracefully here.

On the G510 keyboards the same USB-interface which is used for the gaming
keys is also used for the media-keys. Before this commit we would call
hid_hw_stop() on failure to disable the F# emulation and then exit the
probe method with an error code.

This not only causes us to not handle the gaming-keys, but this also
breaks the media keys which is a regression compared to the situation
when these keyboards where handled by the generic hidinput driver.

This commit changes the error handling to clear the hiddev drvdata
(to disable our .raw_event handler) and then returning from the probe
method with success.

The net result of this is that, when connected through a KVM, things
work as well as they did before the hid-lg-g15 driver was introduced.

Fixes: ad4203f5a243 ("HID: lg-g15: Add support for the G510 keyboards' gaming keys")
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806321
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-lg-g15.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-lg-g15.c b/drivers/hid/hid-lg-g15.c
index 8a9268a5c66aa..ad4b5412a9f49 100644
--- a/drivers/hid/hid-lg-g15.c
+++ b/drivers/hid/hid-lg-g15.c
@@ -803,8 +803,10 @@ static int lg_g15_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	}
 
 	if (ret < 0) {
-		hid_err(hdev, "Error disabling keyboard emulation for the G-keys\n");
-		goto error_hw_stop;
+		hid_err(hdev, "Error %d disabling keyboard emulation for the G-keys, falling back to generic hid-input driver\n",
+			ret);
+		hid_set_drvdata(hdev, NULL);
+		return 0;
 	}
 
 	/* Get initial brightness levels */
-- 
2.20.1

[PATCH AUTOSEL 5.6 019/149] RDMA/bnxt_re: Fix lifetimes in bnxt_re_task

[Sasha Levin]

From: Jason Gunthorpe <jgg@mellanox.com>

[ Upstream commit 8a6c61704746d3a1e004e054504ae8d98ed95697 ]

A work queue cannot just rely on the ib_device not being freed, it must
hold a kref on the memory so that the BNXT_RE_FLAG_IBDEV_REGISTERED check
works.

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1584117207-2664-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/bnxt_re/main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index 793c97251588a..400b4fd669a9a 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -1604,6 +1604,7 @@ static void bnxt_re_task(struct work_struct *work)
 	smp_mb__before_atomic();
 	atomic_dec(&rdev->sched_count);
 exit:
+	put_device(&rdev->ibdev.dev);
 	kfree(re_work);
 }
 
@@ -1680,6 +1681,7 @@ static int bnxt_re_netdev_event(struct notifier_block *notifier,
 		/* Allocate for the deferred task */
 		re_work = kzalloc(sizeof(*re_work), GFP_ATOMIC);
 		if (re_work) {
+			get_device(&rdev->ibdev.dev);
 			re_work->rdev = rdev;
 			re_work->event = event;
 			re_work->vlan_dev = (real_dev == netdev ?
-- 
2.20.1

[PATCH AUTOSEL 5.6 020/149] RDMA/cm: Fix ordering of xa_alloc_cyclic() in ib_create_cm_id()

[Sasha Levin]

From: Jason Gunthorpe <jgg@mellanox.com>

[ Upstream commit e8dc4e885c459343970b25acd9320fe9ee5492e7 ]

xa_alloc_cyclic() is a SMP release to be paired with some later acquire
during xa_load() as part of cm_acquire_id().

As such, xa_alloc_cyclic() must be done after the cm_id is fully
initialized, in particular, it absolutely must be after the
refcount_set(), otherwise the refcount_inc() in cm_acquire_id() may not
see the set.

As there are several cases where a reader will be able to use the
id.local_id after cm_acquire_id in the IB_CM_IDLE state there needs to be
an unfortunate split into a NULL allocate and a finalizing xa_store.

Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20200310092545.251365-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cm.c | 27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)

diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 15e99a8884275..3b2b9a3546a13 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -572,18 +572,6 @@ static int cm_init_av_by_path(struct sa_path_rec *path,
 	return 0;
 }
 
-static int cm_alloc_id(struct cm_id_private *cm_id_priv)
-{
-	int err;
-	u32 id;
-
-	err = xa_alloc_cyclic_irq(&cm.local_id_table, &id, cm_id_priv,
-			xa_limit_32b, &cm.local_id_next, GFP_KERNEL);
-
-	cm_id_priv->id.local_id = (__force __be32)id ^ cm.random_id_operand;
-	return err;
-}
-
 static u32 cm_local_id(__be32 local_id)
 {
 	return (__force u32) (local_id ^ cm.random_id_operand);
@@ -825,6 +813,7 @@ struct ib_cm_id *ib_create_cm_id(struct ib_device *device,
 				 void *context)
 {
 	struct cm_id_private *cm_id_priv;
+	u32 id;
 	int ret;
 
 	cm_id_priv = kzalloc(sizeof *cm_id_priv, GFP_KERNEL);
@@ -836,9 +825,6 @@ struct ib_cm_id *ib_create_cm_id(struct ib_device *device,
 	cm_id_priv->id.cm_handler = cm_handler;
 	cm_id_priv->id.context = context;
 	cm_id_priv->id.remote_cm_qpn = 1;
-	ret = cm_alloc_id(cm_id_priv);
-	if (ret)
-		goto error;
 
 	spin_lock_init(&cm_id_priv->lock);
 	init_completion(&cm_id_priv->comp);
@@ -847,11 +833,20 @@ struct ib_cm_id *ib_create_cm_id(struct ib_device *device,
 	INIT_LIST_HEAD(&cm_id_priv->altr_list);
 	atomic_set(&cm_id_priv->work_count, -1);
 	refcount_set(&cm_id_priv->refcount, 1);
+
+	ret = xa_alloc_cyclic_irq(&cm.local_id_table, &id, NULL, xa_limit_32b,
+				  &cm.local_id_next, GFP_KERNEL);
+	if (ret)
+		goto error;
+	cm_id_priv->id.local_id = (__force __be32)id ^ cm.random_id_operand;
+	xa_store_irq(&cm.local_id_table, cm_local_id(cm_id_priv->id.local_id),
+		     cm_id_priv, GFP_KERNEL);
+
 	return &cm_id_priv->id;
 
 error:
 	kfree(cm_id_priv);
-	return ERR_PTR(-ENOMEM);
+	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL(ib_create_cm_id);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 021/149] RDMA/cm: Add missing locking around id.state in cm_dup_req_handler

[Sasha Levin]

From: Jason Gunthorpe <jgg@mellanox.com>

[ Upstream commit d1de9a88074b66482443f0cd91618d7b51a7c9b6 ]

All accesses to id.state must be done under the spinlock.

Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20200310092545.251365-10-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cm.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 3b2b9a3546a13..f3a845c100384 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -1833,8 +1833,12 @@ static void cm_dup_req_handler(struct cm_work *work,
 			counter[CM_REQ_COUNTER]);
 
 	/* Quick state check to discard duplicate REQs. */
-	if (cm_id_priv->id.state == IB_CM_REQ_RCVD)
+	spin_lock_irq(&cm_id_priv->lock);
+	if (cm_id_priv->id.state == IB_CM_REQ_RCVD) {
+		spin_unlock_irq(&cm_id_priv->lock);
 		return;
+	}
+	spin_unlock_irq(&cm_id_priv->lock);
 
 	ret = cm_alloc_response_msg(work->port, work->mad_recv_wc, &msg);
 	if (ret)
-- 
2.20.1

[PATCH AUTOSEL 5.6 022/149] selftests/bpf: Fix test_progs's parsing of test numbers

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit fc32490bff855a539d253c8a52c5a1ba51d1325a ]

When specifying disjoint set of tests, test_progs doesn't set skipped test's
array elements to false. This leads to spurious execution of tests that should
have been skipped. Fix it by explicitly initializing them to false.

Fixes: 3a516a0a3a7b ("selftests/bpf: add sub-tests support for test_progs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314013932.4035712-2-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_progs.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index bab1e6f1d8f13..709b6d43bbed9 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -408,7 +408,7 @@ static int parse_str_list(const char *s, struct str_set *set)
 
 int parse_num_list(const char *s, struct test_selector *sel)
 {
-	int i, set_len = 0, num, start = 0, end = -1;
+	int i, set_len = 0, new_len, num, start = 0, end = -1;
 	bool *set = NULL, *tmp, parsing_end = false;
 	char *next;
 
@@ -443,18 +443,19 @@ int parse_num_list(const char *s, struct test_selector *sel)
 			return -EINVAL;
 
 		if (end + 1 > set_len) {
-			set_len = end + 1;
-			tmp = realloc(set, set_len);
+			new_len = end + 1;
+			tmp = realloc(set, new_len);
 			if (!tmp) {
 				free(set);
 				return -ENOMEM;
 			}
+			for (i = set_len; i < start; i++)
+				tmp[i] = false;
 			set = tmp;
+			set_len = new_len;
 		}
-		for (i = start; i <= end; i++) {
+		for (i = start; i <= end; i++)
 			set[i] = true;
-		}
-
 	}
 
 	if (!set)
-- 
2.20.1

[PATCH AUTOSEL 5.6 023/149] drm/amdgpu: check GFX RAS capability before reset counters

[Sasha Levin]

From: Hawking Zhang <Hawking.Zhang@amd.com>

[ Upstream commit 06dcd7eb83ee65382305ce48686e3dadaad42088 ]

disallow the logical to be enabled on platforms that
don't support gfx ras at this stage, like sriov skus,
dgpu with legacy ras.etc

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 3 +++
 drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 889154a78c4a8..beba9c596c493 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -6326,6 +6326,9 @@ static void gfx_v9_0_clear_ras_edc_counter(struct amdgpu_device *adev)
 {
 	int i, j, k;
 
+	if (!amdgpu_ras_is_supported(adev, AMDGPU_RAS_BLOCK__GFX))
+		return;
+
 	/* read back registers to clear the counters */
 	mutex_lock(&adev->grbm_idx_mutex);
 	for (i = 0; i < ARRAY_SIZE(gfx_v9_0_edc_counter_regs); i++) {
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c
index f099f13d7f1e9..9955532345ec0 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4.c
@@ -897,6 +897,9 @@ void gfx_v9_4_clear_ras_edc_counter(struct amdgpu_device *adev)
 {
 	int i, j, k;
 
+	if (!amdgpu_ras_is_supported(adev, AMDGPU_RAS_BLOCK__GFX))
+		return;
+
 	mutex_lock(&adev->grbm_idx_mutex);
 	for (i = 0; i < ARRAY_SIZE(gfx_v9_4_edc_counter_regs); i++) {
 		for (j = 0; j < gfx_v9_4_edc_counter_regs[i].se_num; j++) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 024/149] net/mlx5: E-Switch, Hold mutex when querying drop counter in legacy mode

[Sasha Levin]

From: Bodong Wang <bodong@mellanox.com>

[ Upstream commit 14c844cbf3503076de6e2e48d575216f1600b19f ]

Consider scenario below, CPU 1 is at risk to query already destroyed
drop counters. Need to apply the same state mutex when disabling vport.

+-------------------------------+-------------------------------------+
| CPU 0                         | CPU 1                               |
+-------------------------------+-------------------------------------+
| mlx5_device_disable_sriov     | mlx5e_get_vf_stats                  |
| mlx5_eswitch_disable          | mlx5_eswitch_get_vport_stats        |
| esw_disable_vport             | mlx5_eswitch_query_vport_drop_stats |
| mlx5_fc_destroy(drop_counter) | mlx5_fc_query(drop_counter)         |
+-------------------------------+-------------------------------------+

Fixes: b8a0dbe3a90b ("net/mlx5e: E-switch, Add steering drop counters")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index e49acd0c5da5c..b9451f25f22cf 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -2600,9 +2600,13 @@ static int mlx5_eswitch_query_vport_drop_stats(struct mlx5_core_dev *dev,
 	u64 bytes = 0;
 	int err = 0;
 
-	if (!vport->enabled || esw->mode != MLX5_ESWITCH_LEGACY)
+	if (esw->mode != MLX5_ESWITCH_LEGACY)
 		return 0;
 
+	mutex_lock(&esw->state_lock);
+	if (!vport->enabled)
+		goto unlock;
+
 	if (vport->egress.legacy.drop_counter)
 		mlx5_fc_query(dev, vport->egress.legacy.drop_counter,
 			      &stats->rx_dropped, &bytes);
@@ -2613,20 +2617,22 @@ static int mlx5_eswitch_query_vport_drop_stats(struct mlx5_core_dev *dev,
 
 	if (!MLX5_CAP_GEN(dev, receive_discard_vport_down) &&
 	    !MLX5_CAP_GEN(dev, transmit_discard_vport_down))
-		return 0;
+		goto unlock;
 
 	err = mlx5_query_vport_down_stats(dev, vport->vport, 1,
 					  &rx_discard_vport_down,
 					  &tx_discard_vport_down);
 	if (err)
-		return err;
+		goto unlock;
 
 	if (MLX5_CAP_GEN(dev, receive_discard_vport_down))
 		stats->rx_dropped += rx_discard_vport_down;
 	if (MLX5_CAP_GEN(dev, transmit_discard_vport_down))
 		stats->tx_dropped += tx_discard_vport_down;
 
-	return 0;
+unlock:
+	mutex_unlock(&esw->state_lock);
+	return err;
 }
 
 int mlx5_eswitch_get_vport_stats(struct mlx5_eswitch *esw,
-- 
2.20.1

[PATCH AUTOSEL 5.6 025/149] libbpf: Ignore incompatible types with matching name during CO-RE relocation

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit d121e1d34b72c4975ff0340901d926c0aaf98174 ]

When finding target type candidates, ignore forward declarations, functions,
and other named types of incompatible kind. Not doing this can cause false
errors.  See [0] for one such case (due to struct pt_regs forward
declaration).

  [0] https://github.com/iovisor/bcc/pull/2806#issuecomment-598543645

Fixes: ddc7c3042614 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-3-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 7469c7dcc15e7..80ab0acc9dcdd 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -3868,6 +3868,10 @@ static struct ids_vec *bpf_core_find_cands(const struct btf *local_btf,
 		if (str_is_empty(targ_name))
 			continue;
 
+		t = skip_mods_and_typedefs(targ_btf, i, NULL);
+		if (!btf_is_composite(t) && !btf_is_array(t))
+			continue;
+
 		targ_essent_len = bpf_core_essential_name_len(targ_name);
 		if (targ_essent_len != local_essent_len)
 			continue;
-- 
2.20.1

[PATCH AUTOSEL 5.6 026/149] NTB: set peer_sta within event handler itself

[Sasha Levin]

From: Arindam Nath <arindam.nath@amd.com>

[ Upstream commit 2465b87ce36ea2dbd97e5fb58a0efd284c9f687e ]

amd_ack_smu() should only set the corresponding
bits into SMUACK register. Setting the bitmask
of peer_sta should be done within the event handler.
They are two different things, and so should be
handled differently and at different places.

Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ntb/hw/amd/ntb_hw_amd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/ntb/hw/amd/ntb_hw_amd.c b/drivers/ntb/hw/amd/ntb_hw_amd.c
index e52b300b2f5b7..119cfd89afddc 100644
--- a/drivers/ntb/hw/amd/ntb_hw_amd.c
+++ b/drivers/ntb/hw/amd/ntb_hw_amd.c
@@ -493,8 +493,6 @@ static void amd_ack_smu(struct amd_ntb_dev *ndev, u32 bit)
 	reg = readl(mmio + AMD_SMUACK_OFFSET);
 	reg |= bit;
 	writel(reg, mmio + AMD_SMUACK_OFFSET);
-
-	ndev->peer_sta |= bit;
 }
 
 static void amd_handle_event(struct amd_ntb_dev *ndev, int vec)
@@ -512,9 +510,11 @@ static void amd_handle_event(struct amd_ntb_dev *ndev, int vec)
 	status &= AMD_EVENT_INTMASK;
 	switch (status) {
 	case AMD_PEER_FLUSH_EVENT:
+		ndev->peer_sta |= AMD_PEER_FLUSH_EVENT;
 		dev_info(dev, "Flush is done.\n");
 		break;
 	case AMD_PEER_RESET_EVENT:
+		ndev->peer_sta |= AMD_PEER_RESET_EVENT;
 		amd_ack_smu(ndev, AMD_PEER_RESET_EVENT);
 
 		/* link down first */
@@ -527,6 +527,7 @@ static void amd_handle_event(struct amd_ntb_dev *ndev, int vec)
 	case AMD_PEER_PMETO_EVENT:
 	case AMD_LINK_UP_EVENT:
 	case AMD_LINK_DOWN_EVENT:
+		ndev->peer_sta |= status;
 		amd_ack_smu(ndev, status);
 
 		/* link down */
@@ -540,6 +541,7 @@ static void amd_handle_event(struct amd_ntb_dev *ndev, int vec)
 		if (status & 0x1)
 			dev_info(dev, "Wakeup is done.\n");
 
+		ndev->peer_sta |= AMD_PEER_D0_EVENT;
 		amd_ack_smu(ndev, AMD_PEER_D0_EVENT);
 
 		/* start a timer to poll link status */
-- 
2.20.1

[PATCH AUTOSEL 5.6 027/149] ntb_tool: Fix printk format

[Sasha Levin]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 2ef97a6c181eba48f14c9ed98ce4398d21164683 ]

The correct printk format is %pa or %pap, but not %pa[p].

Fixes: 7f46c8b3a5523 ("NTB: ntb_tool: Add full multi-port NTB API support")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ntb/test/ntb_tool.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c
index d592c0ffbd198..69da758fe64c8 100644
--- a/drivers/ntb/test/ntb_tool.c
+++ b/drivers/ntb/test/ntb_tool.c
@@ -678,19 +678,19 @@ static ssize_t tool_mw_trans_read(struct file *filep, char __user *ubuf,
 			 &inmw->dma_base);
 
 	off += scnprintf(buf + off, buf_size - off,
-			 "Window Size    \t%pa[p]\n",
+			 "Window Size    \t%pap\n",
 			 &inmw->size);
 
 	off += scnprintf(buf + off, buf_size - off,
-			 "Alignment      \t%pa[p]\n",
+			 "Alignment      \t%pap\n",
 			 &addr_align);
 
 	off += scnprintf(buf + off, buf_size - off,
-			 "Size Alignment \t%pa[p]\n",
+			 "Size Alignment \t%pap\n",
 			 &size_align);
 
 	off += scnprintf(buf + off, buf_size - off,
-			 "Size Max       \t%pa[p]\n",
+			 "Size Max       \t%pap\n",
 			 &size_max);
 
 	ret = simple_read_from_buffer(ubuf, size, offp, buf, off);
@@ -907,16 +907,16 @@ static ssize_t tool_peer_mw_trans_read(struct file *filep, char __user *ubuf,
 			 "Virtual address     \t0x%pK\n", outmw->io_base);
 
 	off += scnprintf(buf + off, buf_size - off,
-			 "Phys Address        \t%pa[p]\n", &map_base);
+			 "Phys Address        \t%pap\n", &map_base);
 
 	off += scnprintf(buf + off, buf_size - off,
-			 "Mapping Size        \t%pa[p]\n", &map_size);
+			 "Mapping Size        \t%pap\n", &map_size);
 
 	off += scnprintf(buf + off, buf_size - off,
 			 "Translation Address \t0x%016llx\n", outmw->tr_base);
 
 	off += scnprintf(buf + off, buf_size - off,
-			 "Window Size         \t%pa[p]\n", &outmw->size);
+			 "Window Size         \t%pap\n", &outmw->size);
 
 	ret = simple_read_from_buffer(ubuf, size, offp, buf, off);
 	kfree(buf);
-- 
2.20.1

[PATCH AUTOSEL 5.6 028/149] ath10k: use kzalloc to read for ath10k_sdio_hif_diag_read

[Sasha Levin]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit 402f2992b4d62760cce7c689ff216ea3bf4d6e8a ]

When use command to read values, it crashed.

command:
dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value count=1 bs=4 skip=$((0x100233))

It will call to ath10k_sdio_hif_diag_read with address = 0x4008cc and buf_len = 4.

Then system crash:
[ 1786.013258] Unable to handle kernel paging request at virtual address ffffffc00bd45000
[ 1786.013273] Mem abort info:
[ 1786.013281]   ESR = 0x96000045
[ 1786.013291]   Exception class = DABT (current EL), IL = 32 bits
[ 1786.013299]   SET = 0, FnV = 0
[ 1786.013307]   EA = 0, S1PTW = 0
[ 1786.013314] Data abort info:
[ 1786.013322]   ISV = 0, ISS = 0x00000045
[ 1786.013330]   CM = 0, WnR = 1
[ 1786.013342] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000008542a60e
[ 1786.013350] [ffffffc00bd45000] pgd=0000000000000000, pud=0000000000000000
[ 1786.013368] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[ 1786.013609] Process swapper/0 (pid: 0, stack limit = 0x0000000084b153c6)
[ 1786.013623] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.86 #137
[ 1786.013631] Hardware name: MediaTek krane sku176 board (DT)
[ 1786.013643] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[ 1786.013662] pc : __memcpy+0x94/0x180
[ 1786.013678] lr : swiotlb_tbl_unmap_single+0x84/0x150
[ 1786.013686] sp : ffffff8008003c60
[ 1786.013694] x29: ffffff8008003c90 x28: ffffffae96411f80
[ 1786.013708] x27: ffffffae960d2018 x26: ffffff8019a4b9a8
[ 1786.013721] x25: 0000000000000000 x24: 0000000000000001
[ 1786.013734] x23: ffffffae96567000 x22: 00000000000051d4
[ 1786.013747] x21: 0000000000000000 x20: 00000000fe6e9000
[ 1786.013760] x19: 0000000000000004 x18: 0000000000000020
[ 1786.013773] x17: 0000000000000001 x16: 0000000000000000
[ 1786.013787] x15: 00000000ffffffff x14: 00000000000044c0
[ 1786.013800] x13: 0000000000365ba4 x12: 0000000000000000
[ 1786.013813] x11: 0000000000000001 x10: 00000037be6e9000
[ 1786.013826] x9 : ffffffc940000000 x8 : 000000000bd45000
[ 1786.013839] x7 : 0000000000000000 x6 : ffffffc00bd45000
[ 1786.013852] x5 : 0000000000000000 x4 : 0000000000000000
[ 1786.013865] x3 : 0000000000000c00 x2 : 0000000000000004
[ 1786.013878] x1 : fffffff7be6e9004 x0 : ffffffc00bd45000
[ 1786.013891] Call trace:
[ 1786.013903]  __memcpy+0x94/0x180
[ 1786.013914]  unmap_single+0x6c/0x84
[ 1786.013925]  swiotlb_unmap_sg_attrs+0x54/0x80
[ 1786.013938]  __swiotlb_unmap_sg_attrs+0x8c/0xa4
[ 1786.013952]  msdc_unprepare_data+0x6c/0x84
[ 1786.013963]  msdc_request_done+0x58/0x84
[ 1786.013974]  msdc_data_xfer_done+0x1a0/0x1c8
[ 1786.013985]  msdc_irq+0x12c/0x17c
[ 1786.013996]  __handle_irq_event_percpu+0xe4/0x250
[ 1786.014006]  handle_irq_event_percpu+0x28/0x68
[ 1786.014015]  handle_irq_event+0x48/0x78
[ 1786.014026]  handle_fasteoi_irq+0xd0/0x1a0
[ 1786.014039]  __handle_domain_irq+0x84/0xc4
[ 1786.014050]  gic_handle_irq+0x124/0x1a4
[ 1786.014059]  el1_irq+0xb0/0x128
[ 1786.014072]  cpuidle_enter_state+0x298/0x328
[ 1786.014082]  cpuidle_enter+0x30/0x40
[ 1786.014094]  do_idle+0x190/0x268
[ 1786.014104]  cpu_startup_entry+0x24/0x28
[ 1786.014116]  rest_init+0xd4/0xe0
[ 1786.014126]  start_kernel+0x30c/0x38c
[ 1786.014139] Code: f8408423 f80084c3 36100062 b8404423 (b80044c3)
[ 1786.014150] ---[ end trace 3b02ddb698ea69ee ]---
[ 1786.015415] Kernel panic - not syncing: Fatal exception in interrupt
[ 1786.015433] SMP: stopping secondary CPUs
[ 1786.015447] Kernel Offset: 0x2e8d200000 from 0xffffff8008000000
[ 1786.015458] CPU features: 0x0,2188200c
[ 1786.015466] Memory Limit: none

For sdio chip, it need the memory which is kmalloc, if it is
vmalloc from ath10k_mem_value_read, then it have a memory error.
kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so
add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer
which is vmalloc from ath10k_mem_value_read.

This patch only effect sdio chip.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index e5316b911e1dd..9208291aaca3d 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -1647,23 +1647,33 @@ static int ath10k_sdio_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
 				     size_t buf_len)
 {
 	int ret;
+	void *mem;
+
+	mem = kzalloc(buf_len, GFP_KERNEL);
+	if (!mem)
+		return -ENOMEM;
 
 	/* set window register to start read cycle */
 	ret = ath10k_sdio_write32(ar, MBOX_WINDOW_READ_ADDR_ADDRESS, address);
 	if (ret) {
 		ath10k_warn(ar, "failed to set mbox window read address: %d", ret);
-		return ret;
+		goto out;
 	}
 
 	/* read the data */
-	ret = ath10k_sdio_read(ar, MBOX_WINDOW_DATA_ADDRESS, buf, buf_len);
+	ret = ath10k_sdio_read(ar, MBOX_WINDOW_DATA_ADDRESS, mem, buf_len);
 	if (ret) {
 		ath10k_warn(ar, "failed to read from mbox window data address: %d\n",
 			    ret);
-		return ret;
+		goto out;
 	}
 
-	return 0;
+	memcpy(buf, mem, buf_len);
+
+out:
+	kfree(mem);
+
+	return ret;
 }
 
 static int ath10k_sdio_hif_diag_read32(struct ath10k *ar, u32 address,
-- 
2.20.1

[PATCH AUTOSEL 5.6 029/149] mwifiex: set needed_headroom, not hard_header_len

[Sasha Levin]

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit 9454f7a895b822dd8fb4588fc55fda7c96728869 ]

hard_header_len provides limitations for things like AF_PACKET, such
that we don't allow transmitting packets smaller than this.

needed_headroom provides a suggested minimum headroom for SKBs, so that
we can trivally add our headers to the front.

The latter is the correct field to use in this case, while the former
mostly just prevents sending small AF_PACKET frames.

In any case, mwifiex already does its own bounce buffering [1] if we
don't have enough headroom, so hints (not hard limits) are all that are
needed.

This is the essentially the same bug (and fix) that brcmfmac had, fixed
in commit cb39288fd6bb ("brcmfmac: use ndev->needed_headroom to reserve
additional header space").

[1] mwifiex_hard_start_xmit():
	if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN) {
	[...]
		/* Insufficient skb headroom - allocate a new skb */

Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Ganapathi Bhat <ganapathi.gbhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index d896841685008..e63bc15c6e305 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -3052,7 +3052,7 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 
 	dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
 	dev->watchdog_timeo = MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT;
-	dev->hard_header_len += MWIFIEX_MIN_DATA_HEADER_LEN;
+	dev->needed_headroom = MWIFIEX_MIN_DATA_HEADER_LEN;
 	dev->ethtool_ops = &mwifiex_ethtool_ops;
 
 	mdev_priv = netdev_priv(dev);
-- 
2.20.1

[PATCH AUTOSEL 5.6 030/149] Bluetooth: L2CAP: handle l2cap config request during open state

[Sasha Levin]

From: Howard Chung <howardchung@google.com>

[ Upstream commit 96298f640104e4cd9a913a6e50b0b981829b94ff ]

According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5,
the incoming L2CAP_ConfigReq should be handled during
OPEN state.

The section below shows the btmon trace when running
L2CAP/COS/CFD/BV-12-C before and after this change.

=== Before ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12                #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16                #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12                #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5      #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5      #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16                #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18                #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5      #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14                #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20                #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                ......
< ACL Data TX: Handle 256 flags 0x00 dlen 14                #32
      L2CAP: Command Reject (0x01) ident 3 len 6
        Reason: Invalid CID in request (0x0002)
        Destination CID: 64
        Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5      #33
        Num handles: 1
        Handle: 256
        Count: 1
...
=== After ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12               #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16               #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16               #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5     #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14               #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20               #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                .....
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #32
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #33
      L2CAP: Configure Request (0x04) ident 3 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #34
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #35
        Num handles: 1
        Handle: 256
        Count: 1
...

Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 195459a1e53ef..4e3ce6273973b 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4181,7 +4181,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
 		return 0;
 	}
 
-	if (chan->state != BT_CONFIG && chan->state != BT_CONNECT2) {
+	if (chan->state != BT_CONFIG && chan->state != BT_CONNECT2 &&
+	    chan->state != BT_CONNECTED) {
 		cmd_reject_invalid_cid(conn, cmd->ident, chan->scid,
 				       chan->dcid);
 		goto unlock;
-- 
2.20.1

[PATCH AUTOSEL 5.6 031/149] drm/tegra: dc: Release PM and RGB output when client's registration fails

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 0411ea89a689531e1829fdf8af3747646c02c721 ]

Runtime PM and RGB output need to be released when host1x client
registration fails. The releasing is missed in the code, let's correct it.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/dc.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 7c70fd31a4c24..870f9a68ad2c5 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -2588,10 +2588,16 @@ static int tegra_dc_probe(struct platform_device *pdev)
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to register host1x client: %d\n",
 			err);
-		return err;
+		goto disable_pm;
 	}
 
 	return 0;
+
+disable_pm:
+	pm_runtime_disable(&pdev->dev);
+	tegra_dc_rgb_remove(dc);
+
+	return err;
 }
 
 static int tegra_dc_remove(struct platform_device *pdev)
-- 
2.20.1

[PATCH AUTOSEL 5.6 032/149] ath10k: fix not registering airtime of 11a station with WMM disable

[Sasha Levin]

From: Yibo Zhao <yiboz@codeaurora.org>

[ Upstream commit f9680c75d187f2d5b9288c02f7a432041d4447b4 ]

The tid of 11a station with WMM disable reported by FW is 0x10 in
tx completion. The tid 16 is mapped to a NULL txq since buffer
MMPDU capbility is not supported. Then 11a station's airtime will
not be registered due to NULL txq check. As a results, airtime of
11a station keeps unchanged in debugfs system.

Mask the tid along with IEEE80211_QOS_CTL_TID_MASK to make it in
the valid range.

Hardwares tested : QCA9984
Firmwares tested : 10.4-3.10-00047

Signed-off-by: Yibo Zhao <yiboz@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 38a5814cf345d..f883f2a724dd9 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2744,7 +2744,8 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar,
 			continue;
 		}
 
-		tid = FIELD_GET(HTT_TX_PPDU_DUR_INFO0_TID_MASK, info0);
+		tid = FIELD_GET(HTT_TX_PPDU_DUR_INFO0_TID_MASK, info0) &
+						IEEE80211_QOS_CTL_TID_MASK;
 		tx_duration = __le32_to_cpu(ppdu_dur->tx_duration);
 
 		ieee80211_sta_register_airtime(peer->sta, tid, tx_duration, 0);
-- 
2.20.1

[PATCH AUTOSEL 5.6 033/149] drm/amd/display: Stop if retimer is not available

[Sasha Levin]

From: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[ Upstream commit a0e40018dcc3f59a10ca21d58f8ea8ceb1b035ac ]

Raven provides retimer feature support that requires i2c interaction in
order to make it work well, all settings required for this configuration
are loaded from the Atom bios which include the i2c address. If the
retimer feature is not available, we should abort the attempt to set
this feature, otherwise, it makes the following line return
I2C_CHANNEL_OPERATION_NO_RESPONSE:

 i2c_success = i2c_write(pipe_ctx, slave_address, buffer, sizeof(buffer));
 ...
 if (!i2c_success)
   ASSERT(i2c_success);

This ends up causing problems with hotplugging HDMI displays on Raven,
and causes retimer settings to warn like so:

WARNING: CPU: 1 PID: 429 at
drivers/gpu/drm/amd/amdgpu/../dal/dc/core/dc_link.c:1998
write_i2c_retimer_setting+0xc2/0x3c0 [amdgpu] Modules linked in:
edac_mce_amd ccp kvm irqbypass binfmt_misc crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel snd_hda_codec_realtek snd_hda_codec_generic
ledtrig_audio snd_hda_codec_hdmi snd_hda_intel amdgpu(+) snd_hda_codec
snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event
snd_rawmidi aesni_intel snd_seq amd_iommu_v2 gpu_sched aes_x86_64
crypto_simd cryptd glue_helper snd_seq_device ttm drm_kms_helper
snd_timer eeepc_wmi wmi_bmof asus_wmi sparse_keymap drm mxm_wmi snd
k10temp fb_sys_fops syscopyarea sysfillrect sysimgblt soundcore joydev
input_leds mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables
x_tables autofs4 igb i2c_algo_bit hid_generic usbhid i2c_piix4 dca ahci
hid libahci video wmi gpio_amdpt gpio_generic CPU: 1 PID: 429 Comm:
systemd-udevd Tainted: G        W         5.2.0-rc1sept162019+ #1
Hardware name: System manufacturer System Product Name/ROG STRIX B450-F
GAMING, BIOS 2605 08/06/2019
RIP: 0010:write_i2c_retimer_setting+0xc2/0x3c0 [amdgpu]
Code: ff 0f b6 4d ce 44 0f b6 45 cf 44 0f b6 c8 45 89 cf 44 89 e2 48 c7
c6 f0 34 bc c0 bf 04 00 00 00 e8 63 b0 90 ff 45 84 ff 75 02 <0f> 0b 42
0f b6 04 73 8d 50 f6 80 fa 02 77 8c 3c 0a 0f 85 c8 00 00 RSP:
0018:ffffa99d02726fd0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa99d02727035 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff976acc857440
RBP: ffffa99d02727018 R08: 0000000000000002 R09: 000000000002a600
R10: ffffe90610193680 R11: 00000000000005e3 R12: 000000000000005d
R13: ffff976ac4b201b8 R14: 0000000000000001 R15: 0000000000000000
FS:  00007f14f99e1680(0000) GS:ffff976acc840000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdf212843b8 CR3: 0000000408906000 CR4: 00000000003406e0
Call Trace:
 core_link_enable_stream+0x626/0x680 [amdgpu]
 dce110_apply_ctx_to_hw+0x414/0x4e0 [amdgpu]
 dc_commit_state+0x331/0x5e0 [amdgpu]
 ? drm_calc_timestamping_constants+0xf9/0x150 [drm]
 amdgpu_dm_atomic_commit_tail+0x395/0x1e00 [amdgpu]
 ? dm_plane_helper_prepare_fb+0x20c/0x280 [amdgpu]
 commit_tail+0x42/0x70 [drm_kms_helper]
 drm_atomic_helper_commit+0x10c/0x120 [drm_kms_helper]
 amdgpu_dm_atomic_commit+0x95/0xa0 [amdgpu]
 drm_atomic_commit+0x4a/0x50 [drm]
 restore_fbdev_mode_atomic+0x1c0/0x1e0 [drm_kms_helper]
 restore_fbdev_mode+0x4c/0x160 [drm_kms_helper]
 ? _cond_resched+0x19/0x40
 drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_helper]
 drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper]
 fbcon_init+0x471/0x630
 visual_init+0xd5/0x130
 do_bind_con_driver+0x20a/0x430
 do_take_over_console+0x7d/0x1b0
 do_fbcon_takeover+0x5c/0xb0
 fbcon_event_notify+0x6cd/0x8a0
 notifier_call_chain+0x4c/0x70
 blocking_notifier_call_chain+0x43/0x60
 fb_notifier_call_chain+0x1b/0x20
 register_framebuffer+0x254/0x360
 __drm_fb_helper_initial_config_and_unlock+0x2c5/0x510 [drm_kms_helper]
 drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper]
 amdgpu_fbdev_init+0xcd/0x100 [amdgpu]
 amdgpu_device_init+0x1156/0x1930 [amdgpu]
 amdgpu_driver_load_kms+0x8d/0x2e0 [amdgpu]
 drm_dev_register+0x12b/0x1c0 [drm]
 amdgpu_pci_probe+0xd3/0x160 [amdgpu]
 local_pci_probe+0x47/0xa0
 pci_device_probe+0x142/0x1b0
 really_probe+0xf5/0x3d0
 driver_probe_device+0x11b/0x130
 device_driver_attach+0x58/0x60
 __driver_attach+0xa3/0x140
 ? device_driver_attach+0x60/0x60
 ? device_driver_attach+0x60/0x60
 bus_for_each_dev+0x74/0xb0
 ? kmem_cache_alloc_trace+0x1a3/0x1c0
 driver_attach+0x1e/0x20
 bus_add_driver+0x147/0x220
 ? 0xffffffffc0cb9000
 driver_register+0x60/0x100
 ? 0xffffffffc0cb9000
 __pci_register_driver+0x5a/0x60
 amdgpu_init+0x74/0x83 [amdgpu]
 do_one_initcall+0x4a/0x1fa
 ? _cond_resched+0x19/0x40
 ? kmem_cache_alloc_trace+0x3f/0x1c0
 ? __vunmap+0x1cc/0x200
 do_init_module+0x5f/0x227
 load_module+0x2330/0x2b40
 __do_sys_finit_module+0xfc/0x120
 ? __do_sys_finit_module+0xfc/0x120
 __x64_sys_finit_module+0x1a/0x20
 do_syscall_64+0x5a/0x130
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f14f9500839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff9bc4f5a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055afb5abce30 RCX: 00007f14f9500839
RDX: 0000000000000000 RSI: 000055afb5ace0f0 RDI: 0000000000000017
RBP: 000055afb5ace0f0 R08: 0000000000000000 R09: 000000000000000a
R10: 0000000000000017 R11: 0000000000000246 R12: 0000000000000000
R13: 000055afb5aad800 R14: 0000000000020000 R15: 0000000000000000
---[ end trace c286e96563966f08 ]---

This commit reworks the way that we handle i2c write for retimer in the
way that we abort this configuration if the feature is not available in
the device. For debug sake, we kept a simple log message in case the
retimer is not available.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 67 ++++++++-----------
 1 file changed, 29 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index a09119c10d7c9..ee0be0119bf4f 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -1733,8 +1733,7 @@ static void write_i2c_retimer_setting(
 				slave_address, buffer[0], buffer[1], i2c_success?1:0);
 
 			if (!i2c_success)
-				/* Write failure */
-				ASSERT(i2c_success);
+				goto i2c_write_fail;
 
 			/* Based on DP159 specs, APPLY_RX_TX_CHANGE bit in 0x0A
 			 * needs to be set to 1 on every 0xA-0xC write.
@@ -1752,8 +1751,7 @@ static void write_i2c_retimer_setting(
 						pipe_ctx->stream->link->ddc,
 						slave_address, &offset, 1, &value, 1);
 					if (!i2c_success)
-						/* Write failure */
-						ASSERT(i2c_success);
+						goto i2c_write_fail;
 				}
 
 				buffer[0] = offset;
@@ -1765,8 +1763,7 @@ static void write_i2c_retimer_setting(
 					offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 					slave_address, buffer[0], buffer[1], i2c_success?1:0);
 				if (!i2c_success)
-					/* Write failure */
-					ASSERT(i2c_success);
+					goto i2c_write_fail;
 			}
 		}
 	}
@@ -1786,8 +1783,7 @@ static void write_i2c_retimer_setting(
 					slave_address, buffer[0], buffer[1], i2c_success?1:0);
 
 				if (!i2c_success)
-					/* Write failure */
-					ASSERT(i2c_success);
+					goto i2c_write_fail;
 
 				/* Based on DP159 specs, APPLY_RX_TX_CHANGE bit in 0x0A
 				 * needs to be set to 1 on every 0xA-0xC write.
@@ -1805,8 +1801,7 @@ static void write_i2c_retimer_setting(
 								pipe_ctx->stream->link->ddc,
 								slave_address, &offset, 1, &value, 1);
 						if (!i2c_success)
-							/* Write failure */
-							ASSERT(i2c_success);
+							goto i2c_write_fail;
 					}
 
 					buffer[0] = offset;
@@ -1818,8 +1813,7 @@ static void write_i2c_retimer_setting(
 						offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 						slave_address, buffer[0], buffer[1], i2c_success?1:0);
 					if (!i2c_success)
-						/* Write failure */
-						ASSERT(i2c_success);
+						goto i2c_write_fail;
 				}
 			}
 		}
@@ -1837,8 +1831,7 @@ static void write_i2c_retimer_setting(
 				offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 				slave_address, buffer[0], buffer[1], i2c_success?1:0);
 		if (!i2c_success)
-			/* Write failure */
-			ASSERT(i2c_success);
+			goto i2c_write_fail;
 
 		/* Write offset 0x00 to 0x23 */
 		buffer[0] = 0x00;
@@ -1849,8 +1842,7 @@ static void write_i2c_retimer_setting(
 			offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 			slave_address, buffer[0], buffer[1], i2c_success?1:0);
 		if (!i2c_success)
-			/* Write failure */
-			ASSERT(i2c_success);
+			goto i2c_write_fail;
 
 		/* Write offset 0xff to 0x00 */
 		buffer[0] = 0xff;
@@ -1861,10 +1853,14 @@ static void write_i2c_retimer_setting(
 			offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 			slave_address, buffer[0], buffer[1], i2c_success?1:0);
 		if (!i2c_success)
-			/* Write failure */
-			ASSERT(i2c_success);
+			goto i2c_write_fail;
 
 	}
+
+	return;
+
+i2c_write_fail:
+	DC_LOG_DEBUG("Set retimer failed");
 }
 
 static void write_i2c_default_retimer_setting(
@@ -1889,8 +1885,7 @@ static void write_i2c_default_retimer_setting(
 		offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 		slave_address, buffer[0], buffer[1], i2c_success?1:0);
 	if (!i2c_success)
-		/* Write failure */
-		ASSERT(i2c_success);
+		goto i2c_write_fail;
 
 	/* Write offset 0x0A to 0x17 */
 	buffer[0] = 0x0A;
@@ -1901,8 +1896,7 @@ static void write_i2c_default_retimer_setting(
 		offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 		slave_address, buffer[0], buffer[1], i2c_success?1:0);
 	if (!i2c_success)
-		/* Write failure */
-		ASSERT(i2c_success);
+		goto i2c_write_fail;
 
 	/* Write offset 0x0B to 0xDA or 0xD8 */
 	buffer[0] = 0x0B;
@@ -1913,8 +1907,7 @@ static void write_i2c_default_retimer_setting(
 		offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 		slave_address, buffer[0], buffer[1], i2c_success?1:0);
 	if (!i2c_success)
-		/* Write failure */
-		ASSERT(i2c_success);
+		goto i2c_write_fail;
 
 	/* Write offset 0x0A to 0x17 */
 	buffer[0] = 0x0A;
@@ -1925,8 +1918,7 @@ static void write_i2c_default_retimer_setting(
 		offset = 0x%x, reg_val= 0x%x, i2c_success = %d\n",
 		slave_address, buffer[0], buffer[1], i2c_success?1:0);
 	if (!i2c_success)
-		/* Write failure */
-		ASSERT(i2c_success);
+		goto i2c_write_fail;
 
 	/* Write offset 0x0C to 0x1D or 0x91 */
 	buffer[0] = 0x0C;
@@ -1937,8 +1929,7 @@ static void write_i2c_default_retimer_setting(
 		offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 		slave_address, buffer[0], buffer[1], i2c_success?1:0);
 	if (!i2c_success)
-		/* Write failure */
-		ASSERT(i2c_success);
+		goto i2c_write_fail;
 
 	/* Write offset 0x0A to 0x17 */
 	buffer[0] = 0x0A;
@@ -1949,8 +1940,7 @@ static void write_i2c_default_retimer_setting(
 		offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 		slave_address, buffer[0], buffer[1], i2c_success?1:0);
 	if (!i2c_success)
-		/* Write failure */
-		ASSERT(i2c_success);
+		goto i2c_write_fail;
 
 
 	if (is_vga_mode) {
@@ -1965,8 +1955,7 @@ static void write_i2c_default_retimer_setting(
 			offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
 			slave_address, buffer[0], buffer[1], i2c_success?1:0);
 		if (!i2c_success)
-			/* Write failure */
-			ASSERT(i2c_success);
+			goto i2c_write_fail;
 
 		/* Write offset 0x00 to 0x23 */
 		buffer[0] = 0x00;
@@ -1977,8 +1966,7 @@ static void write_i2c_default_retimer_setting(
 			offset = 0x%x, reg_val= 0x%x, i2c_success = %d\n",
 			slave_address, buffer[0], buffer[1], i2c_success?1:0);
 		if (!i2c_success)
-			/* Write failure */
-			ASSERT(i2c_success);
+			goto i2c_write_fail;
 
 		/* Write offset 0xff to 0x00 */
 		buffer[0] = 0xff;
@@ -1989,9 +1977,13 @@ static void write_i2c_default_retimer_setting(
 			offset = 0x%x, reg_val= 0x%x, i2c_success = %d end here\n",
 			slave_address, buffer[0], buffer[1], i2c_success?1:0);
 		if (!i2c_success)
-			/* Write failure */
-			ASSERT(i2c_success);
+			goto i2c_write_fail;
 	}
+
+	return;
+
+i2c_write_fail:
+	DC_LOG_DEBUG("Set default retimer failed");
 }
 
 static void write_i2c_redriver_setting(
@@ -2020,8 +2012,7 @@ static void write_i2c_redriver_setting(
 		slave_address, buffer[3], buffer[4], buffer[5], buffer[6], i2c_success?1:0);
 
 	if (!i2c_success)
-		/* Write failure */
-		ASSERT(i2c_success);
+		DC_LOG_DEBUG("Set redriver failed");
 }
 
 static void disable_link(struct dc_link *link, enum signal_type signal)
-- 
2.20.1

[PATCH AUTOSEL 5.6 034/149] net: phylink: Add missing Backplane speeds

[Sasha Levin]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit c580165ffbf24fbda5c42de269021766911221f4 ]

USXGMII also supports these missing backplane speeds.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phylink.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 6e66b8e77ec7b..030206be10d8a 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -308,11 +308,13 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 			phylink_set(pl->supported, 1000baseT_Half);
 			phylink_set(pl->supported, 1000baseT_Full);
 			phylink_set(pl->supported, 1000baseX_Full);
+			phylink_set(pl->supported, 1000baseKX_Full);
 			phylink_set(pl->supported, 2500baseT_Full);
 			phylink_set(pl->supported, 2500baseX_Full);
 			phylink_set(pl->supported, 5000baseT_Full);
 			phylink_set(pl->supported, 10000baseT_Full);
 			phylink_set(pl->supported, 10000baseKR_Full);
+			phylink_set(pl->supported, 10000baseKX4_Full);
 			phylink_set(pl->supported, 10000baseCR_Full);
 			phylink_set(pl->supported, 10000baseSR_Full);
 			phylink_set(pl->supported, 10000baseLR_Full);
-- 
2.20.1

[PATCH AUTOSEL 5.6 035/149] net/mlx5e: Init ethtool steering for representors

[Sasha Levin]

From: Vlad Buslov <vladbu@mellanox.com>

[ Upstream commit 6783e8b29f636383af293a55336f036bc7ad5619 ]

During transition to uplink representors the code responsible for
initializing ethtool steering functionality wasn't added to representor
init rx routine. This causes NULL pointer dereference during configuration
of network flow classification rule with ethtool (only possible to
reproduce with next commit in this series which registers necessary ethtool
callbacks).

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
index 6ed307d7f1914..937ab57b98c44 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -1660,6 +1660,8 @@ static int mlx5e_init_rep_rx(struct mlx5e_priv *priv)
 	if (err)
 		goto err_destroy_ttc_table;
 
+	mlx5e_ethtool_init_steering(priv);
+
 	return 0;
 
 err_destroy_ttc_table:
-- 
2.20.1

[PATCH AUTOSEL 5.6 036/149] drm/amd/display: writing stereo polarity register if swapped

[Sasha Levin]

From: Martin Leung <martin.leung@amd.com>

[ Upstream commit e592e85f3378246dd66b861fa60ef803d8cece6b ]

[why]
on some displays that prefer swapped polarity we were seeing L/R images
swapped because OTG_STEREO_SYNC_OUTPUT_POLARITY would always be mapped
to 0

[how]
fix initial dal3 implementation to properly update the polarity field
according to the crtc_stereo_flags (same as
OTG_STEREO_EYE_FLAG_POLARITY)

Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
index a9a43b397db99..f39c94d68fb25 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_optc.c
@@ -1195,7 +1195,7 @@ static void optc1_enable_stereo(struct timing_generator *optc,
 			REG_UPDATE_3(OTG_STEREO_CONTROL,
 				OTG_STEREO_EN, stereo_en,
 				OTG_STEREO_SYNC_OUTPUT_LINE_NUM, 0,
-				OTG_STEREO_SYNC_OUTPUT_POLARITY, 0);
+				OTG_STEREO_SYNC_OUTPUT_POLARITY, flags->RIGHT_EYE_POLARITY == 0 ? 0 : 1);
 
 		if (flags->PROGRAM_POLARITY)
 			REG_UPDATE(OTG_STEREO_CONTROL,
-- 
2.20.1

[PATCH AUTOSEL 5.6 037/149] Bluetooth: Fix calculation of SCO handle for packet processing

[Sasha Levin]

From: Marcel Holtmann <marcel@holtmann.org>

[ Upstream commit debdedf2eb5a2d9777cabff40900772be13cd9f9 ]

When processing SCO packets, the handle is wrongly assumed as 16-bit
value. The actual size is 12-bits and the other 4-bits are used for
packet flags.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index cbbc34a006d16..28b0ed6b10f66 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -4387,13 +4387,16 @@ static void hci_scodata_packet(struct hci_dev *hdev, struct sk_buff *skb)
 {
 	struct hci_sco_hdr *hdr = (void *) skb->data;
 	struct hci_conn *conn;
-	__u16 handle;
+	__u16 handle, flags;
 
 	skb_pull(skb, HCI_SCO_HDR_SIZE);
 
 	handle = __le16_to_cpu(hdr->handle);
+	flags  = hci_flags(handle);
+	handle = hci_handle(handle);
 
-	BT_DBG("%s len %d handle 0x%4.4x", hdev->name, skb->len, handle);
+	BT_DBG("%s len %d handle 0x%4.4x flags 0x%4.4x", hdev->name, skb->len,
+	       handle, flags);
 
 	hdev->stat.sco_rx++;
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 038/149] net: rmnet: add missing module alias

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit eed22a0685d651fc531bc63f215bb2a71d4b98e5 ]

In the current rmnet code, there is no module alias.
So, RTNL couldn't load rmnet module automatically.

Test commands:
    ip link add dummy0 type dummy
    modprobe -rv rmnet
    ip link add rmnet0 link dummy0 type rmnet  mux_id 1

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
index fbf4cbcf1a654..d846a0ccea8f0 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -475,4 +475,5 @@ static void __exit rmnet_exit(void)
 
 module_init(rmnet_init)
 module_exit(rmnet_exit)
+MODULE_ALIAS_RTNL_LINK("rmnet");
 MODULE_LICENSE("GPL v2");
-- 
2.20.1

[PATCH AUTOSEL 5.6 039/149] drm/amd/display: Fix default logger mask definition

[Sasha Levin]

From: Eric Bernstein <eric.bernstein@amd.com>

[ Upstream commit ccb6af1e25830e5601b6beacc698390f0245316f ]

[Why]
Logger mask was updated to uint64_t, however default mask definition was
not updated for unsigned long long

[How]
Update DC_DEFAULT_LOG_MASK to support uint64_t type

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/include/logger_types.h    | 63 ++++++++++---------
 1 file changed, 32 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/include/logger_types.h b/drivers/gpu/drm/amd/display/include/logger_types.h
index 89a7092670193..d66f9d8eefb49 100644
--- a/drivers/gpu/drm/amd/display/include/logger_types.h
+++ b/drivers/gpu/drm/amd/display/include/logger_types.h
@@ -124,36 +124,37 @@ enum dc_log_type {
 #define DC_MIN_LOG_MASK ((1 << LOG_ERROR) | \
 		(1 << LOG_DETECTION_EDID_PARSER))
 
-#define DC_DEFAULT_LOG_MASK ((1 << LOG_ERROR) | \
-		(1 << LOG_WARNING) | \
-		(1 << LOG_EVENT_MODE_SET) | \
-		(1 << LOG_EVENT_DETECTION) | \
-		(1 << LOG_EVENT_LINK_TRAINING) | \
-		(1 << LOG_EVENT_LINK_LOSS) | \
-		(1 << LOG_EVENT_UNDERFLOW) | \
-		(1 << LOG_RESOURCE) | \
-		(1 << LOG_FEATURE_OVERRIDE) | \
-		(1 << LOG_DETECTION_EDID_PARSER) | \
-		(1 << LOG_DC) | \
-		(1 << LOG_HW_HOTPLUG) | \
-		(1 << LOG_HW_SET_MODE) | \
-		(1 << LOG_HW_RESUME_S3) | \
-		(1 << LOG_HW_HPD_IRQ) | \
-		(1 << LOG_SYNC) | \
-		(1 << LOG_BANDWIDTH_VALIDATION) | \
-		(1 << LOG_MST) | \
-		(1 << LOG_DETECTION_DP_CAPS) | \
-		(1 << LOG_BACKLIGHT)) | \
-		(1 << LOG_I2C_AUX) | \
-		(1 << LOG_IF_TRACE) | \
-		(1 << LOG_DTN) /* | \
-		(1 << LOG_DEBUG) | \
-		(1 << LOG_BIOS) | \
-		(1 << LOG_SURFACE) | \
-		(1 << LOG_SCALER) | \
-		(1 << LOG_DML) | \
-		(1 << LOG_HW_LINK_TRAINING) | \
-		(1 << LOG_HW_AUDIO)| \
-		(1 << LOG_BANDWIDTH_CALCS)*/
+#define DC_DEFAULT_LOG_MASK ((1ULL << LOG_ERROR) | \
+		(1ULL << LOG_WARNING) | \
+		(1ULL << LOG_EVENT_MODE_SET) | \
+		(1ULL << LOG_EVENT_DETECTION) | \
+		(1ULL << LOG_EVENT_LINK_TRAINING) | \
+		(1ULL << LOG_EVENT_LINK_LOSS) | \
+		(1ULL << LOG_EVENT_UNDERFLOW) | \
+		(1ULL << LOG_RESOURCE) | \
+		(1ULL << LOG_FEATURE_OVERRIDE) | \
+		(1ULL << LOG_DETECTION_EDID_PARSER) | \
+		(1ULL << LOG_DC) | \
+		(1ULL << LOG_HW_HOTPLUG) | \
+		(1ULL << LOG_HW_SET_MODE) | \
+		(1ULL << LOG_HW_RESUME_S3) | \
+		(1ULL << LOG_HW_HPD_IRQ) | \
+		(1ULL << LOG_SYNC) | \
+		(1ULL << LOG_BANDWIDTH_VALIDATION) | \
+		(1ULL << LOG_MST) | \
+		(1ULL << LOG_DETECTION_DP_CAPS) | \
+		(1ULL << LOG_BACKLIGHT)) | \
+		(1ULL << LOG_I2C_AUX) | \
+		(1ULL << LOG_IF_TRACE) | \
+		(1ULL << LOG_HDMI_FRL) | \
+		(1ULL << LOG_DTN) /* | \
+		(1ULL << LOG_DEBUG) | \
+		(1ULL << LOG_BIOS) | \
+		(1ULL << LOG_SURFACE) | \
+		(1ULL << LOG_SCALER) | \
+		(1ULL << LOG_DML) | \
+		(1ULL << LOG_HW_LINK_TRAINING) | \
+		(1ULL << LOG_HW_AUDIO)| \
+		(1ULL << LOG_BANDWIDTH_CALCS)*/
 
 #endif /* __DAL_LOGGER_TYPES_H__ */
-- 
2.20.1

[PATCH AUTOSEL 5.6 040/149] IB/mlx5: Fix missing congestion control debugfs on rep rdma device

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit 79db784e794b6e7b7fb9b1dd464a34e4c0c039af ]

Cited commit missed to include low level congestion control related
debugfs stage initialization.  This resulted in missing debugfs entries
for cc_params of a RDMA device.

Add them back.

Fixes: b5ca15ad7e61 ("IB/mlx5: Add proper representors support")
Link: https://lore.kernel.org/r/20200227125407.99803-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index ffa7c2100edb9..82a62335ad3b6 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -7078,6 +7078,9 @@ const struct mlx5_ib_profile raw_eth_profile = {
 	STAGE_CREATE(MLX5_IB_STAGE_COUNTERS,
 		     mlx5_ib_stage_counters_init,
 		     mlx5_ib_stage_counters_cleanup),
+	STAGE_CREATE(MLX5_IB_STAGE_CONG_DEBUGFS,
+		     mlx5_ib_stage_cong_debugfs_init,
+		     mlx5_ib_stage_cong_debugfs_cleanup),
 	STAGE_CREATE(MLX5_IB_STAGE_UAR,
 		     mlx5_ib_stage_uar_init,
 		     mlx5_ib_stage_uar_cleanup),
-- 
2.20.1

[PATCH AUTOSEL 5.6 041/149] Bluetooth: guard against controllers sending zero'd events

[Sasha Levin]

From: Alain Michaud <alainm@chromium.org>

[ Upstream commit 08bb4da90150e2a225f35e0f642cdc463958d696 ]

Some controllers have been observed to send zero'd events under some
conditions.  This change guards against this condition as well as adding
a trace to facilitate diagnosability of this condition.

Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 6ddc4a74a5e42..673351800ed3e 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5858,6 +5858,11 @@ void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
 	u8 status = 0, event = hdr->evt, req_evt = 0;
 	u16 opcode = HCI_OP_NOP;
 
+	if (!event) {
+		bt_dev_warn(hdev, "Received unexpected HCI Event 00000000");
+		goto done;
+	}
+
 	if (hdev->sent_cmd && bt_cb(hdev->sent_cmd)->hci.req_event == event) {
 		struct hci_command_hdr *cmd_hdr = (void *) hdev->sent_cmd->data;
 		opcode = __le16_to_cpu(cmd_hdr->opcode);
@@ -6069,6 +6074,7 @@ void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
 		req_complete_skb(hdev, status, opcode, orig_skb);
 	}
 
+done:
 	kfree_skb(orig_skb);
 	kfree_skb(skb);
 	hdev->stat.evt_rx++;
-- 
2.20.1

[PATCH AUTOSEL 5.6 042/149] libbpf: Fix handling of optional field_name in btf_dump__emit_type_decl

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 320a36063e1441210106aa33997ad3770d4c86b4 ]

Internal functions, used by btf_dump__emit_type_decl(), assume field_name is
never going to be NULL. Ensure it's always the case.

Fixes: 9f81654eebe8 ("libbpf: Expose BTF-to-C type declaration emitting API")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200303180800.3303471-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/btf_dump.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index bd09ed1710f12..dc451e4de5ad4 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -1030,7 +1030,7 @@ int btf_dump__emit_type_decl(struct btf_dump *d, __u32 id,
 	if (!OPTS_VALID(opts, btf_dump_emit_type_decl_opts))
 		return -EINVAL;
 
-	fname = OPTS_GET(opts, field_name, NULL);
+	fname = OPTS_GET(opts, field_name, "");
 	lvl = OPTS_GET(opts, indent_level, 0);
 	btf_dump_emit_type_decl(d, id, fname, lvl);
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 043/149] Bluetooth: btqca: Fix the NVM baudrate tag offcet for wcn3991

[Sasha Levin]

From: Rocky Liao <rjliao@codeaurora.org>

[ Upstream commit b63882549b2bf2979cb1506bdf783edf8b45c613 ]

The baudrate set byte of wcn3991 in the NVM tag is byte 1, not byte 2.
This patch will set correct byte for wcn3991.

Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btqca.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ec69e5dd7bd3e..a16845c0751d3 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -139,7 +139,7 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
 EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
 
 static void qca_tlv_check_data(struct qca_fw_config *config,
-				const struct firmware *fw)
+		const struct firmware *fw, enum qca_btsoc_type soc_type)
 {
 	const u8 *data;
 	u32 type_len;
@@ -148,6 +148,7 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
 	struct tlv_type_hdr *tlv;
 	struct tlv_type_patch *tlv_patch;
 	struct tlv_type_nvm *tlv_nvm;
+	uint8_t nvm_baud_rate = config->user_baud_rate;
 
 	tlv = (struct tlv_type_hdr *)fw->data;
 
@@ -216,7 +217,10 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
 				tlv_nvm->data[0] |= 0x80;
 
 				/* UART Baud Rate */
-				tlv_nvm->data[2] = config->user_baud_rate;
+				if (soc_type == QCA_WCN3991)
+					tlv_nvm->data[1] = nvm_baud_rate;
+				else
+					tlv_nvm->data[2] = nvm_baud_rate;
 
 				break;
 
@@ -354,7 +358,7 @@ static int qca_download_firmware(struct hci_dev *hdev,
 		return ret;
 	}
 
-	qca_tlv_check_data(config, fw);
+	qca_tlv_check_data(config, fw, soc_type);
 
 	segment = fw->data;
 	remain = fw->size;
-- 
2.20.1

[PATCH AUTOSEL 5.6 044/149] platform/x86/intel-uncore-freq: Fix static checker issue and potential race condition

[Sasha Levin]

From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

[ Upstream commit 64b73cff66acee7c1ec063676e0771534578c164 ]

There is a possible race condition when:
All CPUs in a package is offlined and just before the last CPU offline,
user tries to read sysfs entry and read happens while offline callback
is about to delete the sysfs entry.

Although not reproduced but this is possible scenerio and can be
reproduced by adding a msleep() in the show_min_max_freq_khz() before
mutex_lock() and read min_freq attribute from user space. Before
msleep() finishes, force every CPUs in a package offline.

This will cause deadlock, with offline and sysfs read/write operation
because of mutex_lock. The uncore_remove_die_entry() will not release
mutex till read/write callback returns because of kobject_put() and
read/write callback waiting on mutex.

We don't have to remove the sysfs folder when the package is offline.
While there is no CPU present, we can fail the read/write calls by
returning ENXIO error. So remove the kobject_put() call in offline path.

This also address the warning from static checker, as there is no
access to "data" variable after kobject_put:
"The patch 49a474c7ba51: "platform/x86: Add support for Uncore
frequency control" from Jan 13, 2020, leads to the following static
checker warning:

        drivers/platform/x86/intel-uncore-frequency.c:285 uncore_remove_die_entry()
        error: dereferencing freed memory 'data'
"

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-uncore-frequency.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/platform/x86/intel-uncore-frequency.c b/drivers/platform/x86/intel-uncore-frequency.c
index 2b1a0734c3f87..c83ec95e8f3ed 100644
--- a/drivers/platform/x86/intel-uncore-frequency.c
+++ b/drivers/platform/x86/intel-uncore-frequency.c
@@ -97,6 +97,9 @@ static int uncore_read_ratio(struct uncore_data *data, unsigned int *min,
 	u64 cap;
 	int ret;
 
+	if (data->control_cpu < 0)
+		return -ENXIO;
+
 	ret = rdmsrl_on_cpu(data->control_cpu, MSR_UNCORE_RATIO_LIMIT, &cap);
 	if (ret)
 		return ret;
@@ -116,6 +119,11 @@ static int uncore_write_ratio(struct uncore_data *data, unsigned int input,
 
 	mutex_lock(&uncore_lock);
 
+	if (data->control_cpu < 0) {
+		ret = -ENXIO;
+		goto finish_write;
+	}
+
 	input /= UNCORE_FREQ_KHZ_MULTIPLIER;
 	if (!input || input > 0x7F) {
 		ret = -EINVAL;
@@ -273,18 +281,15 @@ static void uncore_add_die_entry(int cpu)
 	mutex_unlock(&uncore_lock);
 }
 
-/* Last CPU in this die is offline, so remove sysfs entries */
+/* Last CPU in this die is offline, make control cpu invalid */
 static void uncore_remove_die_entry(int cpu)
 {
 	struct uncore_data *data;
 
 	mutex_lock(&uncore_lock);
 	data = uncore_get_instance(cpu);
-	if (data) {
-		kobject_put(&data->kobj);
+	if (data)
 		data->control_cpu = -1;
-		data->valid = false;
-	}
 	mutex_unlock(&uncore_lock);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 045/149] Bluetooth: hci_qca: Not send vendor pre-shutdown command for QCA Rome

[Sasha Levin]

From: Rocky Liao <rjliao@codeaurora.org>

[ Upstream commit 4f9ed5bd63dc16d061cdeb00eeff9d56e86a6beb ]

QCA Rome doesn't support the pre-shutdown vendor hci command, this patch
will check the soc type in qca_power_off() and only send this command
for wcn399x.

Fixes: ae563183b647 ("Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome")
Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_qca.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d6e0c99ee5eb1..7e5a097bd0ed8 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1726,9 +1726,11 @@ static int qca_power_off(struct hci_dev *hdev)
 {
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	struct qca_data *qca = hu->priv;
+	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 
 	/* Stop sending shutdown command if soc crashes. */
-	if (qca->memdump_state == QCA_MEMDUMP_IDLE) {
+	if (qca_is_wcn399x(soc_type)
+		&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
 		qca_send_pre_shutdown_cmd(hdev);
 		usleep_range(8000, 10000);
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.6 046/149] drm/amd/display: Only round InfoFrame refresh rates

[Sasha Levin]

From: Aric Cyr <aric.cyr@amd.com>

[ Upstream commit 3fc6376ed6f2f67bc9fb0c7a3cf07967d6aa6216 ]

[Why]
When calculating nominal refresh rates, don't round.
Only the VSIF needs to be rounded.

[How]
Revert rounding change for nominal and just round when forming the
FreeSync VSIF.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/freesync/freesync.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
index b9992ebf77a62..4e542826cd269 100644
--- a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
+++ b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c
@@ -524,12 +524,12 @@ static void build_vrr_infopacket_data(const struct mod_vrr_params *vrr,
 		infopacket->sb[6] |= 0x04;
 
 	/* PB7 = FreeSync Minimum refresh rate (Hz) */
-	infopacket->sb[7] = (unsigned char)(vrr->min_refresh_in_uhz / 1000000);
+	infopacket->sb[7] = (unsigned char)((vrr->min_refresh_in_uhz + 500000) / 1000000);
 
 	/* PB8 = FreeSync Maximum refresh rate (Hz)
 	 * Note: We should never go above the field rate of the mode timing set.
 	 */
-	infopacket->sb[8] = (unsigned char)(vrr->max_refresh_in_uhz / 1000000);
+	infopacket->sb[8] = (unsigned char)((vrr->max_refresh_in_uhz + 500000) / 1000000);
 
 
 	//FreeSync HDR
@@ -747,10 +747,6 @@ void mod_freesync_build_vrr_params(struct mod_freesync *mod_freesync,
 	nominal_field_rate_in_uhz =
 			mod_freesync_calc_nominal_field_rate(stream);
 
-	/* Rounded to the nearest Hz */
-	nominal_field_rate_in_uhz = 1000000ULL *
-			div_u64(nominal_field_rate_in_uhz + 500000, 1000000);
-
 	min_refresh_in_uhz = in_config->min_refresh_in_uhz;
 	max_refresh_in_uhz = in_config->max_refresh_in_uhz;
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 047/149] drm/amd/display: Fix HDMI repeater authentication

[Sasha Levin]

From: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>

[ Upstream commit 63a85ff6c35d8a7aaf0fb60ddbab93530d495bf3 ]

when the rxstatus split was done the index was incorrect. This
lead to HDMI repeater authentication failure for HDCP2.X So fix it

Fixes: 302169003733 ("drm/amd/display: split rxstatus for hdmi and dp")
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c
index 55246711700ba..6fd68326452ce 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp2_execution.c
@@ -34,7 +34,7 @@ static inline enum mod_hdcp_status check_receiver_id_list_ready(struct mod_hdcp
 	if (is_dp_hdcp(hdcp))
 		is_ready = HDCP_2_2_DP_RXSTATUS_READY(hdcp->auth.msg.hdcp2.rxstatus_dp) ? 1 : 0;
 	else
-		is_ready = (HDCP_2_2_HDMI_RXSTATUS_READY(hdcp->auth.msg.hdcp2.rxstatus[0]) &&
+		is_ready = (HDCP_2_2_HDMI_RXSTATUS_READY(hdcp->auth.msg.hdcp2.rxstatus[1]) &&
 				(HDCP_2_2_HDMI_RXSTATUS_MSG_SZ_HI(hdcp->auth.msg.hdcp2.rxstatus[1]) << 8 |
 						hdcp->auth.msg.hdcp2.rxstatus[0])) ? 1 : 0;
 	return is_ready ? MOD_HDCP_STATUS_SUCCESS :
@@ -67,7 +67,7 @@ static inline enum mod_hdcp_status check_reauthentication_request(
 				MOD_HDCP_STATUS_HDCP2_REAUTH_REQUEST :
 				MOD_HDCP_STATUS_SUCCESS;
 	else
-		ret = HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(hdcp->auth.msg.hdcp2.rxstatus[0]) ?
+		ret = HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(hdcp->auth.msg.hdcp2.rxstatus[1]) ?
 				MOD_HDCP_STATUS_HDCP2_REAUTH_REQUEST :
 				MOD_HDCP_STATUS_SUCCESS;
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.6 048/149] crypto: chelsio - Endianess bug in create_authenc_wr

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit ff462ddfd95b915345c3c7c037c3bfafdc58bae7 ]

kctx_len = (ntohl(KEY_CONTEXT_CTX_LEN_V(aeadctx->key_ctx_hdr)) << 4)
                - sizeof(chcr_req->key_ctx);
can't possibly be endian-safe.  Look: ->key_ctx_hdr is __be32.  And
KEY_CONTEXT_CTX_LEN_V is "shift up by 24 bits".  On little-endian hosts it
sees
	b0 b1 b2 b3
in memory, inteprets that into b0 + (b1 << 8) + (b2 << 16) + (b3 << 24),
shifts up by 24, resulting in b0 << 24, does ntohl (byteswap on l-e),
gets b0 and shifts that up by 4.  So we get b0 * 16 - sizeof(...).

Sounds reasonable, but on b-e we get
b3 + (b2 << 8) + (b1 << 16) + (b0 << 24), shift up by 24,
yielding b3 << 24, do ntohl (no-op on b-e) and then shift up by 4.
Resulting in b3 << 28 - sizeof(...), i.e. slightly under b3 * 256M.

Then we increase it some more and pass to alloc_skb() as size.
Somehow I doubt that we really want a quarter-gigabyte skb allocation
here...

Note that when you are building those values in
#define  FILL_KEY_CTX_HDR(ck_size, mk_size, d_ck, opad, ctx_len) \
                htonl(KEY_CONTEXT_VALID_V(1) | \
                      KEY_CONTEXT_CK_SIZE_V((ck_size)) | \
                      KEY_CONTEXT_MK_SIZE_V(mk_size) | \
                      KEY_CONTEXT_DUAL_CK_V((d_ck)) | \
                      KEY_CONTEXT_OPAD_PRESENT_V((opad)) | \
                      KEY_CONTEXT_SALT_PRESENT_V(1) | \
                      KEY_CONTEXT_CTX_LEN_V((ctx_len)))
ctx_len ends up in the first octet (i.e. b0 in the above), which
matches the current behaviour on l-e.  If that's the intent, this
thing should've been
        kctx_len = (KEY_CONTEXT_CTX_LEN_G(ntohl(aeadctx->key_ctx_hdr)) << 4)
                - sizeof(chcr_req->key_ctx);
instead - fetch after ntohl() we get (b0 << 24) + (b1 << 16) + (b2 << 8) + b3,
shift it down by 24 (b0), resuling in b0 * 16 - sizeof(...) both on l-e and
on b-e.

PS: when sparse warns you about endianness problems, it might be worth checking
if there really is something wrong.  And I don't mean "slap __force cast on it"...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/chelsio/chcr_algo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/chelsio/chcr_algo.c b/drivers/crypto/chelsio/chcr_algo.c
index b4b9b22125d17..ad18124d0acb1 100644
--- a/drivers/crypto/chelsio/chcr_algo.c
+++ b/drivers/crypto/chelsio/chcr_algo.c
@@ -2351,7 +2351,7 @@ static struct sk_buff *create_authenc_wr(struct aead_request *req,
 	snents = sg_nents_xlen(req->src, req->assoclen + req->cryptlen,
 			       CHCR_SRC_SG_SIZE, 0);
 	dst_size = get_space_for_phys_dsgl(dnents);
-	kctx_len = (ntohl(KEY_CONTEXT_CTX_LEN_V(aeadctx->key_ctx_hdr)) << 4)
+	kctx_len = (KEY_CONTEXT_CTX_LEN_G(ntohl(aeadctx->key_ctx_hdr)) << 4)
 		- sizeof(chcr_req->key_ctx);
 	transhdr_len = CIPHER_TRANSHDR_SIZE(kctx_len, dst_size);
 	reqctx->imm = (transhdr_len + req->assoclen + req->cryptlen) <
-- 
2.20.1

[PATCH AUTOSEL 5.6 049/149] drm/panel: simple: fix osd070t1718_19ts sync drive edge

[Sasha Levin]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

[ Upstream commit fb0629eeeedb6622c16da1aa76a4520daf9a46e2 ]

The panel datasheet says that the panel samples at falling edge, but
does not say anything about h/v sync signals. Testing shows that if the
sync signals are driven on falling edge, the picture on the panel will
be slightly shifted right.

Setting sync drive edge to the same as data drive edge fixes this issue.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114093950.4101-4-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index e14c14ac62b53..417bbe9984606 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2464,7 +2464,8 @@ static const struct panel_desc osddisplays_osd070t1718_19ts = {
 		.height = 91,
 	},
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
-	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
+		DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
 	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 050/149] net: hns3: modify an unsuitable print when setting unknown duplex to fibre

[Sasha Levin]

From: Guangbin Huang <huangguangbin2@huawei.com>

[ Upstream commit 2d3db26d78805c9e06e26def0081c76e9bb0b7d6 ]

Currently, if device is in link down status and user uses
'ethtool -s' command to set speed but not specify duplex
mode, the duplex mode passed from ethtool to driver is
unknown value(255), and the fibre port will identify this
value as half duplex mode and print "only copper port
supports half duplex!". This message is confusing.

So for fibre port, only the setting duplex is half, prints
error and returns.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index c03856e633202..3f59a1924390f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -736,7 +736,7 @@ static int hns3_check_ksettings_param(const struct net_device *netdev,
 	if (ops->get_media_type)
 		ops->get_media_type(handle, &media_type, &module_type);
 
-	if (cmd->base.duplex != DUPLEX_FULL &&
+	if (cmd->base.duplex == DUPLEX_HALF &&
 	    media_type != HNAE3_MEDIA_TYPE_COPPER) {
 		netdev_err(netdev,
 			   "only copper port supports half duplex!");
-- 
2.20.1

[PATCH AUTOSEL 5.6 051/149] RDMA/rxe: Fix configuration of atomic queue pair attributes

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit fb3063d31995cc4cf1d47a406bb61d6fb1b1d58d ]

From the comment above the definition of the roundup_pow_of_two() macro:

     The result is undefined when n == 0.

Hence only pass positive values to roundup_pow_of_two(). This patch fixes
the following UBSAN complaint:

  UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13
  shift exponent 64 is too large for 64-bit type 'long unsigned int'
  Call Trace:
   dump_stack+0xa5/0xe6
   ubsan_epilogue+0x9/0x26
   __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9
   rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe]
   rxe_modify_qp+0x59/0x70 [rdma_rxe]
   _ib_modify_qp+0x5aa/0x7c0 [ib_core]
   ib_modify_qp+0x3b/0x50 [ib_core]
   cma_modify_qp_rtr+0x234/0x260 [rdma_cm]
   __rdma_accept+0x1a7/0x650 [rdma_cm]
   nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma]
   cma_cm_event_handler+0x6b/0x330 [rdma_cm]
   cma_ib_req_handler+0xe60/0x22d0 [rdma_cm]
   cm_process_work+0x30/0x140 [ib_cm]
   cm_req_handler+0x11f4/0x1cd0 [ib_cm]
   cm_work_handler+0xb8/0x344e [ib_cm]
   process_one_work+0x569/0xb60
   worker_thread+0x7a/0x5d0
   kthread+0x1e6/0x210
   ret_from_fork+0x24/0x30

Link: https://lore.kernel.org/r/20200217205714.26937-1-bvanassche@acm.org
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_qp.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c
index ec21f616ac98d..6c11c3aeeca6e 100644
--- a/drivers/infiniband/sw/rxe/rxe_qp.c
+++ b/drivers/infiniband/sw/rxe/rxe_qp.c
@@ -590,15 +590,16 @@ int rxe_qp_from_attr(struct rxe_qp *qp, struct ib_qp_attr *attr, int mask,
 	int err;
 
 	if (mask & IB_QP_MAX_QP_RD_ATOMIC) {
-		int max_rd_atomic = __roundup_pow_of_two(attr->max_rd_atomic);
+		int max_rd_atomic = attr->max_rd_atomic ?
+			roundup_pow_of_two(attr->max_rd_atomic) : 0;
 
 		qp->attr.max_rd_atomic = max_rd_atomic;
 		atomic_set(&qp->req.rd_atomic, max_rd_atomic);
 	}
 
 	if (mask & IB_QP_MAX_DEST_RD_ATOMIC) {
-		int max_dest_rd_atomic =
-			__roundup_pow_of_two(attr->max_dest_rd_atomic);
+		int max_dest_rd_atomic = attr->max_dest_rd_atomic ?
+			roundup_pow_of_two(attr->max_dest_rd_atomic) : 0;
 
 		qp->attr.max_dest_rd_atomic = max_dest_rd_atomic;
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 052/149] net: intel: e1000e: fix possible sleep-in-atomic-context bugs in e1000e_get_hw_semaphore()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 2e05f756c7099c8991142382648a37b0d4c85943 ]

The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:

drivers/net/ethernet/intel/e1000e/mac.c, 1366:
	usleep_range in e1000e_get_hw_semaphore
drivers/net/ethernet/intel/e1000e/80003es2lan.c, 322:
	e1000e_get_hw_semaphore in e1000_release_swfw_sync_80003es2lan
drivers/net/ethernet/intel/e1000e/80003es2lan.c, 197:
	e1000_release_swfw_sync_80003es2lan in e1000_release_phy_80003es2lan
drivers/net/ethernet/intel/e1000e/netdev.c, 4883:
	(FUNC_PTR) e1000_release_phy_80003es2lan in e1000e_update_phy_stats
drivers/net/ethernet/intel/e1000e/netdev.c, 4917:
	e1000e_update_phy_stats in e1000e_update_stats
drivers/net/ethernet/intel/e1000e/netdev.c, 5945:
	e1000e_update_stats in e1000e_get_stats64
drivers/net/ethernet/intel/e1000e/netdev.c, 5944:
	spin_lock in e1000e_get_stats64

drivers/net/ethernet/intel/e1000e/mac.c, 1384:
	usleep_range in e1000e_get_hw_semaphore
drivers/net/ethernet/intel/e1000e/80003es2lan.c, 322:
	e1000e_get_hw_semaphore in e1000_release_swfw_sync_80003es2lan
drivers/net/ethernet/intel/e1000e/80003es2lan.c, 197:
	e1000_release_swfw_sync_80003es2lan in e1000_release_phy_80003es2lan
drivers/net/ethernet/intel/e1000e/netdev.c, 4883:
	(FUNC_PTR) e1000_release_phy_80003es2lan in e1000e_update_phy_stats
drivers/net/ethernet/intel/e1000e/netdev.c, 4917:
	e1000e_update_phy_stats in e1000e_update_stats
drivers/net/ethernet/intel/e1000e/netdev.c, 5945:
	e1000e_update_stats in e1000e_get_stats64
drivers/net/ethernet/intel/e1000e/netdev.c, 5944:
	spin_lock in e1000e_get_stats64

(FUNC_PTR) means a function pointer is called.

To fix these bugs, usleep_range() is replaced with udelay().

These bugs are found by a static analysis tool STCheck written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/mac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index e531976f8a677..51512a73fdd07 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -1363,7 +1363,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
 		if (!(swsm & E1000_SWSM_SMBI))
 			break;
 
-		usleep_range(50, 100);
+		udelay(100);
 		i++;
 	}
 
@@ -1381,7 +1381,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
 		if (er32(SWSM) & E1000_SWSM_SWESMBI)
 			break;
 
-		usleep_range(50, 100);
+		udelay(100);
 	}
 
 	if (i == timeout) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 053/149] net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 7458bd540fa0a90220b9e8c349d910d9dde9caf8 ]

Either port 5 or port 8 can be used on a 7278 device, make sure that
port 5 also gets configured properly for 2Gb/sec in that case.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/bcm_sf2.c      | 3 +++
 drivers/net/dsa/bcm_sf2_regs.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index b0f5280a83cb6..d9b003432e71b 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -615,6 +615,9 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
 	if (state->duplex == DUPLEX_FULL)
 		reg |= DUPLX_MODE;
 
+	if (priv->type == BCM7278_DEVICE_ID && dsa_is_cpu_port(ds, port))
+		reg |= GMIIP_SPEED_UP_2G;
+
 	core_writel(priv, reg, offset);
 }
 
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index d8a5e6269c0ef..7844781763359 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -178,6 +178,7 @@ enum bcm_sf2_reg_offs {
 #define  RXFLOW_CNTL			(1 << 4)
 #define  TXFLOW_CNTL			(1 << 5)
 #define  SW_OVERRIDE			(1 << 6)
+#define  GMIIP_SPEED_UP_2G		(1 << 7)
 
 #define CORE_WATCHDOG_CTRL		0x001e4
 #define  SOFTWARE_RESET			(1 << 7)
-- 
2.20.1

[PATCH AUTOSEL 5.6 054/149] sh_eth: check sh_eth_cpu_data::no_tx_cntrs when dumping registers

[Sasha Levin]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit 6eaeedc1aa27a423bd89043705eca39215015bb3 ]

When adding the sh_eth_cpu_data::no_tx_cntrs flag I forgot to add the
flag check to  __sh_eth_get_regs(), causing the non-existing TX counter
registers to be considered for dumping on the R7S72100 SoC (the register
offset sanity check has the final say here)...

Fixes: ce9134dff6d9 ("sh_eth: add sh_eth_cpu_data::no_tx_cntrs flag")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/renesas/sh_eth.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 58ca126518a22..cd1f5842b1310 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2184,10 +2184,12 @@ static size_t __sh_eth_get_regs(struct net_device *ndev, u32 *buf)
 		add_reg(BCULR);
 	add_reg(MAHR);
 	add_reg(MALR);
-	add_reg(TROCR);
-	add_reg(CDCR);
-	add_reg(LCCR);
-	add_reg(CNDCR);
+	if (!cd->no_tx_cntrs) {
+		add_reg(TROCR);
+		add_reg(CDCR);
+		add_reg(LCCR);
+		add_reg(CNDCR);
+	}
 	add_reg(CEFCR);
 	add_reg(FRECR);
 	add_reg(TSFRCR);
-- 
2.20.1

[PATCH AUTOSEL 5.6 055/149] sh_eth: check sh_eth_cpu_data::cexcr when dumping registers

[Sasha Levin]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit f75ca32403dbf91e20c275719aab705401b9e718 ]

When adding the sh_eth_cpu_data::cexcr flag I forgot to add the flag
check to  __sh_eth_get_regs(), causing the non-existing RX packet counter
registers to be considered for dumping on  the R7S72100 SoC (the register
offset sanity check has the final say here)...

Fixes: 4c1d45850d5 ("sh_eth: add sh_eth_cpu_data::cexcr flag")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/renesas/sh_eth.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index cd1f5842b1310..ae9469c90ae2c 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2194,8 +2194,10 @@ static size_t __sh_eth_get_regs(struct net_device *ndev, u32 *buf)
 	add_reg(FRECR);
 	add_reg(TSFRCR);
 	add_reg(TLFRCR);
-	add_reg(CERCR);
-	add_reg(CEECR);
+	if (cd->cexcr) {
+		add_reg(CERCR);
+		add_reg(CEECR);
+	}
 	add_reg(MAFCR);
 	if (cd->rtrate)
 		add_reg(RTRATE);
-- 
2.20.1

[PATCH AUTOSEL 5.6 056/149] sh_eth: check sh_eth_cpu_data::no_xdfar when dumping registers

[Sasha Levin]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit 7bf47f609f7eaac4f7e9c407a85ad78997288a38 ]

When adding the sh_eth_cpu_data::no_xdfar flag I forgot to add the flag
check to  __sh_eth_get_regs(), causing the non-existing RDFAR/TDFAR to be
considered for dumping on the R-Car gen1/2 SoCs (the register offset check
has the final say here)...

Fixes: 4c1d45850d5 ("sh_eth: add sh_eth_cpu_data::cexcr flag")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Tested-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/renesas/sh_eth.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index ae9469c90ae2c..44e8c2a5a7b69 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2140,11 +2140,13 @@ static size_t __sh_eth_get_regs(struct net_device *ndev, u32 *buf)
 	add_reg(EESR);
 	add_reg(EESIPR);
 	add_reg(TDLAR);
-	add_reg(TDFAR);
+	if (!cd->no_xdfar)
+		add_reg(TDFAR);
 	add_reg(TDFXR);
 	add_reg(TDFFR);
 	add_reg(RDLAR);
-	add_reg(RDFAR);
+	if (!cd->no_xdfar)
+		add_reg(RDFAR);
 	add_reg(RDFXR);
 	add_reg(RDFFR);
 	add_reg(TRSCER);
-- 
2.20.1

[PATCH AUTOSEL 5.6 057/149] ice: Fix implicit queue mapping mode in ice_vsi_get_qs

[Sasha Levin]

From: Brett Creeley <brett.creeley@intel.com>

[ Upstream commit 39066dc549cf8a688f6e105a4e9f2a8abefbcebe ]

Currently in ice_vsi_get_qs() we set the mapping_mode for Tx and Rx to
vsi->[tx|rx]_mapping_mode, but the problem is vsi->[tx|rx]_mapping_mode
have not been set yet. This was working because ICE_VSI_MAP_CONTIG is
defined to 0. Fix this by being explicit with our mapping mode by
initializing the Tx and Rx structure's mapping_mode to
ICE_VSI_MAP_CONTIG and then setting the vsi->[tx|rx]_mapping_mode to the
[tx|rx]_qs_cfg.mapping_mode values.

Also, only assign the vsi->[tx|rx]_mapping_mode when the queues are
successfully mapped to the VSI. With this change there was no longer a
need to initialize the ret variable to 0 so remove that.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_lib.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index d974e2fa3e638..3353b34561119 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -433,7 +433,7 @@ static int ice_vsi_get_qs(struct ice_vsi *vsi)
 		.scatter_count = ICE_MAX_SCATTER_TXQS,
 		.vsi_map = vsi->txq_map,
 		.vsi_map_offset = 0,
-		.mapping_mode = vsi->tx_mapping_mode
+		.mapping_mode = ICE_VSI_MAP_CONTIG
 	};
 	struct ice_qs_cfg rx_qs_cfg = {
 		.qs_mutex = &pf->avail_q_mutex,
@@ -443,18 +443,21 @@ static int ice_vsi_get_qs(struct ice_vsi *vsi)
 		.scatter_count = ICE_MAX_SCATTER_RXQS,
 		.vsi_map = vsi->rxq_map,
 		.vsi_map_offset = 0,
-		.mapping_mode = vsi->rx_mapping_mode
+		.mapping_mode = ICE_VSI_MAP_CONTIG
 	};
-	int ret = 0;
-
-	vsi->tx_mapping_mode = ICE_VSI_MAP_CONTIG;
-	vsi->rx_mapping_mode = ICE_VSI_MAP_CONTIG;
+	int ret;
 
 	ret = __ice_vsi_get_qs(&tx_qs_cfg);
-	if (!ret)
-		ret = __ice_vsi_get_qs(&rx_qs_cfg);
+	if (ret)
+		return ret;
+	vsi->tx_mapping_mode = tx_qs_cfg.mapping_mode;
 
-	return ret;
+	ret = __ice_vsi_get_qs(&rx_qs_cfg);
+	if (ret)
+		return ret;
+	vsi->rx_mapping_mode = rx_qs_cfg.mapping_mode;
+
+	return 0;
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 5.6 058/149] ice: Add helper to determine if VF link is up

[Sasha Levin]

From: Brett Creeley <brett.creeley@intel.com>

[ Upstream commit 0b6c6a8bb6d541aad9e0f3bb2307316707aec723 ]

The check for vf->link_up is incorrect because this field is only valid if
vf->link_forced is true. Fix this by adding the helper ice_is_vf_link_up()
to determine if the VF's link is up.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/intel/ice/ice_virtchnl_pf.c  | 42 +++++++++++--------
 1 file changed, 25 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 75c70d432c724..5924924b464a4 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -90,6 +90,26 @@ ice_set_pfe_link(struct ice_vf *vf, struct virtchnl_pf_event *pfe,
 	}
 }
 
+/**
+ * ice_is_vf_link_up - check if the VF's link is up
+ * @vf: VF to check if link is up
+ */
+static bool ice_is_vf_link_up(struct ice_vf *vf)
+{
+	struct ice_pf *pf = vf->pf;
+
+	if (ice_check_vf_init(pf, vf))
+		return false;
+
+	if (!vf->num_qs_ena)
+		return false;
+	else if (vf->link_forced)
+		return vf->link_up;
+	else
+		return pf->hw.port_info->phy.link_info.link_info &
+			ICE_AQ_LINK_UP;
+}
+
 /**
  * ice_vc_notify_vf_link_state - Inform a VF of link status
  * @vf: pointer to the VF structure
@@ -99,28 +119,16 @@ ice_set_pfe_link(struct ice_vf *vf, struct virtchnl_pf_event *pfe,
 static void ice_vc_notify_vf_link_state(struct ice_vf *vf)
 {
 	struct virtchnl_pf_event pfe = { 0 };
-	struct ice_link_status *ls;
-	struct ice_pf *pf = vf->pf;
-	struct ice_hw *hw;
-
-	hw = &pf->hw;
-	ls = &hw->port_info->phy.link_info;
+	struct ice_hw *hw = &vf->pf->hw;
 
 	pfe.event = VIRTCHNL_EVENT_LINK_CHANGE;
 	pfe.severity = PF_EVENT_SEVERITY_INFO;
 
-	/* Always report link is down if the VF queues aren't enabled */
-	if (!vf->num_qs_ena) {
+	if (ice_is_vf_link_up(vf))
+		ice_set_pfe_link(vf, &pfe,
+				 hw->port_info->phy.link_info.link_speed, true);
+	else
 		ice_set_pfe_link(vf, &pfe, ICE_AQ_LINK_SPEED_UNKNOWN, false);
-	} else if (vf->link_forced) {
-		u16 link_speed = vf->link_up ?
-			ls->link_speed : ICE_AQ_LINK_SPEED_UNKNOWN;
-
-		ice_set_pfe_link(vf, &pfe, link_speed, vf->link_up);
-	} else {
-		ice_set_pfe_link(vf, &pfe, ls->link_speed,
-				 ls->link_info & ICE_AQ_LINK_UP);
-	}
 
 	ice_aq_send_msg_to_vf(hw, vf->vf_id, VIRTCHNL_OP_EVENT,
 			      VIRTCHNL_STATUS_SUCCESS, (u8 *)&pfe,
-- 
2.20.1

[PATCH AUTOSEL 5.6 059/149] drm/sun4i: dsi: Use NULL to signify "no panel"

[Sasha Levin]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit 0e4e3fb4901d19f49e5c0a582f383b10dda8d1c5 ]

The continued use of an ERR_PTR to signify "no panel" outside of
sun6i_dsi_attach is confusing because it is a double negative. Because
the connector always reports itself as connected, there is also the
possibility of sending an ERR_PTR to drm_panel_get_modes(), which would
crash.

Solve both of these by only storing the panel pointer if it is valid.

Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-2-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index a75fcb1131724..9bd3c97ff3e68 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -749,7 +749,7 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
 	phy_configure(dsi->dphy, &opts);
 	phy_power_on(dsi->dphy);
 
-	if (!IS_ERR(dsi->panel))
+	if (dsi->panel)
 		drm_panel_prepare(dsi->panel);
 
 	/*
@@ -764,7 +764,7 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
 	 * ordering on the panels I've tested it with, so I guess this
 	 * will do for now, until that IP is better understood.
 	 */
-	if (!IS_ERR(dsi->panel))
+	if (dsi->panel)
 		drm_panel_enable(dsi->panel);
 
 	sun6i_dsi_start(dsi, DSI_START_HSC);
@@ -780,7 +780,7 @@ static void sun6i_dsi_encoder_disable(struct drm_encoder *encoder)
 
 	DRM_DEBUG_DRIVER("Disabling DSI output\n");
 
-	if (!IS_ERR(dsi->panel)) {
+	if (dsi->panel) {
 		drm_panel_disable(dsi->panel);
 		drm_panel_unprepare(dsi->panel);
 	}
@@ -942,11 +942,13 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host,
 			    struct mipi_dsi_device *device)
 {
 	struct sun6i_dsi *dsi = host_to_sun6i_dsi(host);
+	struct drm_panel *panel = of_drm_find_panel(device->dev.of_node);
 
+	if (IS_ERR(panel))
+		return PTR_ERR(panel);
+
+	dsi->panel = panel;
 	dsi->device = device;
-	dsi->panel = of_drm_find_panel(device->dev.of_node);
-	if (IS_ERR(dsi->panel))
-		return PTR_ERR(dsi->panel);
 
 	dev_info(host->dev, "Attached device %s\n", device->name);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 060/149] mt76: mt7615: disable 5 GHz on MT7622

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit c3ad5e9d00af19c53dec1d8ae647a78ac377b593 ]

It is not supported by the chip, so avoid issues with potentially wrong
EEPROM configurations.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
index 17e277bf39e0f..cb05a07135a03 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
@@ -111,6 +111,9 @@ static void mt7615_eeprom_parse_hw_cap(struct mt7615_dev *dev)
 		break;
 	}
 
+	if (is_mt7622(&dev->mt76))
+		dev->mt76.cap.has_5ghz = false;
+
 	/* read tx-rx mask from eeprom */
 	val = mt76_rr(dev, MT_TOP_STRAP_STA);
 	max_nss = val & MT_TOP_3NSS ? 3 : 4;
-- 
2.20.1

[PATCH AUTOSEL 5.6 061/149] mt76: fix handling full tx queues in mt76_dma_tx_queue_skb_raw

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 93eaec7625f13cffb593b471405b017c7e64d4ee ]

Fixes a theoretical issue where it could potentially overwrite an existing
descriptor entry (and leaking its skb)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/dma.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index 1847f55e199b0..c001d94958d83 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -261,10 +261,13 @@ mt76_dma_tx_queue_skb_raw(struct mt76_dev *dev, enum mt76_txq_id qid,
 	struct mt76_queue_buf buf;
 	dma_addr_t addr;
 
+	if (q->queued + 1 >= q->ndesc - 1)
+		goto error;
+
 	addr = dma_map_single(dev->dev, skb->data, skb->len,
 			      DMA_TO_DEVICE);
 	if (unlikely(dma_mapping_error(dev->dev, addr)))
-		return -ENOMEM;
+		goto error;
 
 	buf.addr = addr;
 	buf.len = skb->len;
@@ -275,6 +278,10 @@ mt76_dma_tx_queue_skb_raw(struct mt76_dev *dev, enum mt76_txq_id qid,
 	spin_unlock_bh(&q->lock);
 
 	return 0;
+
+error:
+	dev_kfree_skb(skb);
+	return -ENOMEM;
 }
 
 static int
-- 
2.20.1

[PATCH AUTOSEL 5.6 062/149] rtw88: Fix incorrect beamformee role setting

[Sasha Levin]

From: Tzu-En Huang <tehuang@realtek.com>

[ Upstream commit aa7619a39acef91c5a6904f3ada7d0f20e2ad25e ]

In associating and configuring beamformee, bfee->role is not
correctly set before rtw_chip_ops::config_bfee().
Fix it by setting it correctly.

Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/bf.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/bf.c b/drivers/net/wireless/realtek/rtw88/bf.c
index fda771d23f712..b6d1d71f4d302 100644
--- a/drivers/net/wireless/realtek/rtw88/bf.c
+++ b/drivers/net/wireless/realtek/rtw88/bf.c
@@ -41,7 +41,6 @@ void rtw_bf_assoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
 	struct ieee80211_sta_vht_cap *ic_vht_cap;
 	const u8 *bssid = bss_conf->bssid;
 	u32 sound_dim;
-	u8 bfee_role = RTW_BFEE_NONE;
 	u8 i;
 
 	if (!(chip->band & RTW_BAND_5G))
@@ -67,7 +66,7 @@ void rtw_bf_assoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
 		}
 
 		ether_addr_copy(bfee->mac_addr, bssid);
-		bfee_role = RTW_BFEE_MU;
+		bfee->role = RTW_BFEE_MU;
 		bfee->p_aid = (bssid[5] << 1) | (bssid[4] >> 7);
 		bfee->aid = bss_conf->aid;
 		bfinfo->bfer_mu_cnt++;
@@ -85,7 +84,7 @@ void rtw_bf_assoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
 		sound_dim >>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT;
 
 		ether_addr_copy(bfee->mac_addr, bssid);
-		bfee_role = RTW_BFEE_SU;
+		bfee->role = RTW_BFEE_SU;
 		bfee->sound_dim = (u8)sound_dim;
 		bfee->g_id = 0;
 		bfee->p_aid = (bssid[5] << 1) | (bssid[4] >> 7);
@@ -102,7 +101,6 @@ void rtw_bf_assoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
 	}
 
 out_unlock:
-	bfee->role = bfee_role;
 	rcu_read_unlock();
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 063/149] crypto: chelsio - This fixes the kernel panic which occurs during a libkcapi test

[Sasha Levin]

From: Ayush Sawal <ayush.sawal@chelsio.com>

[ Upstream commit 9195189e00a7db55e7d448cee973cae87c5a3c71 ]

The libkcapi test which causes kernel panic is
aead asynchronous vmsplice multiple test.

./bin/kcapi  -v -d 4 -x 10   -c "ccm(aes)"
-q 4edb58e8d5eb6bc711c43a6f3693daebde2e5524f1b55297abb29f003236e43d
-t a7877c99 -n 674742abd0f5ba -k 2861fd0253705d7875c95ba8a53171b4
-a fb7bc304a3909e66e2e0c5ef952712dd884ce3e7324171369f2c5db1adc48c7d

This patch avoids dma_mapping of a zero length sg which causes the panic,
by using sg_nents_for_len which maps only upto a specific length

Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/chelsio/chcr_algo.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/chelsio/chcr_algo.c b/drivers/crypto/chelsio/chcr_algo.c
index ad18124d0acb1..f181330acc0b3 100644
--- a/drivers/crypto/chelsio/chcr_algo.c
+++ b/drivers/crypto/chelsio/chcr_algo.c
@@ -2471,8 +2471,9 @@ int chcr_aead_dma_map(struct device *dev,
 	else
 		reqctx->b0_dma = 0;
 	if (req->src == req->dst) {
-		error = dma_map_sg(dev, req->src, sg_nents(req->src),
-				   DMA_BIDIRECTIONAL);
+		error = dma_map_sg(dev, req->src,
+				sg_nents_for_len(req->src, dst_size),
+					DMA_BIDIRECTIONAL);
 		if (!error)
 			goto err;
 	} else {
-- 
2.20.1

[PATCH AUTOSEL 5.6 064/149] crypto: tcrypt - fix printed skcipher [a]sync mode

[Sasha Levin]

From: Horia Geantă <horia.geanta@nxp.com>

[ Upstream commit 8e3b7fd7ea554ccb1bdc596bfbcdaf56f7ab017c ]

When running tcrypt skcipher speed tests, logs contain things like:
testing speed of async ecb(des3_ede) (ecb(des3_ede-generic)) encryption
or:
testing speed of async ecb(aes) (ecb(aes-ce)) encryption

The algorithm implementations are sync, not async.
Fix this inaccuracy.

Fixes: 7166e589da5b6 ("crypto: tcrypt - Use skcipher")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/tcrypt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index f42f486e90e8a..ba0b7702f2e91 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -1514,8 +1514,8 @@ static void test_skcipher_speed(const char *algo, int enc, unsigned int secs,
 		return;
 	}
 
-	pr_info("\ntesting speed of async %s (%s) %s\n", algo,
-			get_driver_name(crypto_skcipher, tfm), e);
+	pr_info("\ntesting speed of %s %s (%s) %s\n", async ? "async" : "sync",
+		algo, get_driver_name(crypto_skcipher, tfm), e);
 
 	req = skcipher_request_alloc(tfm, GFP_KERNEL);
 	if (!req) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 065/149] drm/amdgpu: Fix missing error check in suspend

[Sasha Levin]

From: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>

[ Upstream commit 70bedd68e7b3a7f1d7f3198bb698fc23bc5aaa68 ]

amdgpu_device_suspend might return an error code since it can be called
from both runtime and system suspend flows. Add the missing return code
in case of a failure.

Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 42f4febe24c6d..921e2944255b2 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -1225,6 +1225,9 @@ static int amdgpu_pmops_runtime_suspend(struct device *dev)
 	drm_kms_helper_poll_disable(drm_dev);
 
 	ret = amdgpu_device_suspend(drm_dev, false);
+	if (ret)
+		return ret;
+
 	if (amdgpu_device_supports_boco(drm_dev)) {
 		/* Only need to handle PCI state in the driver for ATPX
 		 * PCI core handles it for _PR3.
-- 
2.20.1

[PATCH AUTOSEL 5.6 066/149] RDMA/siw: Fix setting active_mtu attribute

[Sasha Levin]

From: Kamal Heib <kamalheib1@gmail.com>

[ Upstream commit beb205dd67aaa4315dedf5c40b47c6e9dee5a469 ]

Make sure to set the active_mtu attribute to avoid report the following
invalid value:

$ ibv_devinfo -d siw0 | grep active_mtu
			active_mtu:		invalid MTU (0)

Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Link: https://lore.kernel.org/r/20200205081354.30438-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/siw/siw_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/sw/siw/siw_verbs.c b/drivers/infiniband/sw/siw/siw_verbs.c
index 07e30138aaa10..73485d0da907d 100644
--- a/drivers/infiniband/sw/siw/siw_verbs.c
+++ b/drivers/infiniband/sw/siw/siw_verbs.c
@@ -168,12 +168,12 @@ int siw_query_port(struct ib_device *base_dev, u8 port,
 
 	memset(attr, 0, sizeof(*attr));
 
-	attr->active_mtu = attr->max_mtu;
 	attr->active_speed = 2;
 	attr->active_width = 2;
 	attr->gid_tbl_len = 1;
 	attr->max_msg_sz = -1;
 	attr->max_mtu = ib_mtu_int_to_enum(sdev->netdev->mtu);
+	attr->active_mtu = ib_mtu_int_to_enum(sdev->netdev->mtu);
 	attr->phys_state = sdev->state == IB_PORT_ACTIVE ?
 		IB_PORT_PHYS_STATE_LINK_UP : IB_PORT_PHYS_STATE_DISABLED;
 	attr->pkey_tbl_len = 1;
-- 
2.20.1

[PATCH AUTOSEL 5.6 067/149] rtw88: 8822c: update power sequence to v16

[Sasha Levin]

From: Tzu-En Huang <tehuang@realtek.com>

[ Upstream commit 8299adec99b29f341f0ee4269f1ce70ca8508e78 ]

Fix switching xtal mode leads to BT USB error issue.

Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/rtw8822c.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index 3865097696d40..d49c8b697e4fc 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -3544,6 +3544,11 @@ static struct rtw_pwr_seq_cmd trans_cardemu_to_act_8822c[] = {
 	 RTW_PWR_INTF_ALL_MSK,
 	 RTW_PWR_ADDR_MAC,
 	 RTW_PWR_CMD_WRITE, BIT(2), BIT(2)},
+	{0x1064,
+	 RTW_PWR_CUT_ALL_MSK,
+	 RTW_PWR_INTF_ALL_MSK,
+	 RTW_PWR_ADDR_MAC,
+	 RTW_PWR_CMD_WRITE, BIT(1), BIT(1)},
 	{0xFFFF,
 	 RTW_PWR_CUT_ALL_MSK,
 	 RTW_PWR_INTF_ALL_MSK,
-- 
2.20.1

[PATCH AUTOSEL 5.6 068/149] drm/amd/display: always apply T7/T9 delay logic

[Sasha Levin]

From: Martin Leung <martin.leung@amd.com>

[ Upstream commit cb8348fec250e517b5facb4cab3125ddc597f9aa ]

[why]
before we exit early in edp_reciever_ready if we detect that panel
is not edp or below rev 1.2. This will skip the backlight/t7 delay panel
patch.

[how]
edit logic to ensure panel patch is applied regardless of edp rev.

Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/display/dc/core/dc_link_hwss.c    | 56 ++++++++++---------
 1 file changed, 29 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
index ddb8550457672..58634f191a55d 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
@@ -153,18 +153,19 @@ bool edp_receiver_ready_T9(struct dc_link *link)
 	unsigned char edpRev = 0;
 	enum dc_status result = DC_OK;
 	result = core_link_read_dpcd(link, DP_EDP_DPCD_REV, &edpRev, sizeof(edpRev));
-	if (edpRev < DP_EDP_12)
-		return true;
-	/* start from eDP version 1.2, SINK_STAUS indicate the sink is ready.*/
-	do {
-		sinkstatus = 1;
-		result = core_link_read_dpcd(link, DP_SINK_STATUS, &sinkstatus, sizeof(sinkstatus));
-		if (sinkstatus == 0)
-			break;
-		if (result != DC_OK)
-			break;
-		udelay(100); //MAx T9
-	} while (++tries < 50);
+
+     /* start from eDP version 1.2, SINK_STAUS indicate the sink is ready.*/
+	if (result == DC_OK && edpRev >= DP_EDP_12) {
+		do {
+			sinkstatus = 1;
+			result = core_link_read_dpcd(link, DP_SINK_STATUS, &sinkstatus, sizeof(sinkstatus));
+			if (sinkstatus == 0)
+				break;
+			if (result != DC_OK)
+				break;
+			udelay(100); //MAx T9
+		} while (++tries < 50);
+	}
 
 	if (link->local_sink->edid_caps.panel_patch.extra_delay_backlight_off > 0)
 		udelay(link->local_sink->edid_caps.panel_patch.extra_delay_backlight_off * 1000);
@@ -183,21 +184,22 @@ bool edp_receiver_ready_T7(struct dc_link *link)
 	unsigned long long time_taken_in_ns = 0;
 
 	result = core_link_read_dpcd(link, DP_EDP_DPCD_REV, &edpRev, sizeof(edpRev));
-	if (result == DC_OK && edpRev < DP_EDP_12)
-		return true;
-	/* start from eDP version 1.2, SINK_STAUS indicate the sink is ready.*/
-	enter_timestamp = dm_get_timestamp(link->ctx);
-	do {
-		sinkstatus = 0;
-		result = core_link_read_dpcd(link, DP_SINK_STATUS, &sinkstatus, sizeof(sinkstatus));
-		if (sinkstatus == 1)
-			break;
-		if (result != DC_OK)
-			break;
-		udelay(25);
-		finish_timestamp = dm_get_timestamp(link->ctx);
-		time_taken_in_ns = dm_get_elapse_time_in_ns(link->ctx, finish_timestamp, enter_timestamp);
-	} while (time_taken_in_ns < 50 * 1000000); //MAx T7 is 50ms
+
+	if (result == DC_OK && edpRev >= DP_EDP_12) {
+		/* start from eDP version 1.2, SINK_STAUS indicate the sink is ready.*/
+		enter_timestamp = dm_get_timestamp(link->ctx);
+		do {
+			sinkstatus = 0;
+			result = core_link_read_dpcd(link, DP_SINK_STATUS, &sinkstatus, sizeof(sinkstatus));
+			if (sinkstatus == 1)
+				break;
+			if (result != DC_OK)
+				break;
+			udelay(25);
+			finish_timestamp = dm_get_timestamp(link->ctx);
+			time_taken_in_ns = dm_get_elapse_time_in_ns(link->ctx, finish_timestamp, enter_timestamp);
+		} while (time_taken_in_ns < 50 * 1000000); //MAx T7 is 50ms
+	}
 
 	if (link->local_sink->edid_caps.panel_patch.extra_t7_ms > 0)
 		udelay(link->local_sink->edid_caps.panel_patch.extra_t7_ms * 1000);
-- 
2.20.1

[PATCH AUTOSEL 5.6 069/149] drm/omap: fix possible object reference leak

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 47340e46f34a3b1d80e40b43ae3d7a8da34a3541 ]

The call to of_find_matching_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1554692313-28882-2-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
index 31502857f013d..ce67891eedd46 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -192,7 +192,7 @@ static int __init omapdss_boot_init(void)
 	dss = of_find_matching_node(NULL, omapdss_of_match);
 
 	if (dss == NULL || !of_device_is_available(dss))
-		return 0;
+		goto put_node;
 
 	omapdss_walk_device(dss, true);
 
@@ -217,6 +217,8 @@ static int __init omapdss_boot_init(void)
 		kfree(n);
 	}
 
+put_node:
+	of_node_put(dss);
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 070/149] audit: CONFIG_CHANGE don't log internal bookkeeping as an event

[Sasha Levin]

From: Steve Grubb <sgrubb@redhat.com>

[ Upstream commit 70b3eeed49e8190d97139806f6fbaf8964306cdb ]

Common Criteria calls out for any action that modifies the audit trail to
be recorded. That usually is interpreted to mean insertion or removal of
rules. It is not required to log modification of the inode information
since the watch is still in effect. Additionally, if the rule is a never
rule and the underlying file is one they do not want events for, they
get an event for this bookkeeping update against their wishes.

Since no device/inode info is logged at insertion and no device/inode
information is logged on update, there is nothing meaningful being
communicated to the admin by the CONFIG_CHANGE updated_rules event. One
can assume that the rule was not "modified" because it is still watching
the intended target. If the device or inode cannot be resolved, then
audit_panic is called which is sufficient.

The correct resolution is to drop logging config_update events since
the watch is still in effect but just on another unknown inode.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/audit_watch.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 4508d5e0cf696..8a8fd732ff6d0 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -302,8 +302,6 @@ static void audit_update_watch(struct audit_parent *parent,
 			if (oentry->rule.exe)
 				audit_remove_mark(oentry->rule.exe);
 
-			audit_watch_log_rule_change(r, owatch, "updated_rules");
-
 			call_rcu(&oentry->rcu, audit_free_rule_rcu);
 		}
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 071/149] Bluetooth: btusb: Add support for 13d3:3548 Realtek 8822CE device

[Sasha Levin]

From: Sergey Shatunov <me@prok.pw>

[ Upstream commit eb3939e386ec8df6049697d388298590231ac79c ]

The ASUS FX505DV laptop contains RTL8822CE device with an
associated BT chip using a USB ID of 13d3:3548.
This patch add fw download support for it.

T:  Bus=03 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3548 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Sergey Shatunov <me@prok.pw>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f5924f3e8b8d8..fa207b7150128 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -387,6 +387,7 @@ static const struct usb_device_id blacklist_table[] = {
 
 	/* Additional Realtek 8822CE Bluetooth devices */
 	{ USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3548), .driver_info = BTUSB_REALTEK },
 
 	/* Silicon Wave based devices */
 	{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
-- 
2.20.1

[PATCH AUTOSEL 5.6 072/149] drm/stm: ltdc: check crtc state before enabling LIE

[Sasha Levin]

From: Yannick Fertre <yannick.fertre@st.com>

[ Upstream commit a6bd58c51ac43083f3977057a7ad668def55812f ]

Following investigations of a hardware bug, the LIE interrupt
can occur while the display controller is not activated.
LIE interrupt (vblank) don't have to be set if the CRTC is not
enabled.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1579601650-7055-1-git-send-email-yannick.fertre@st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/stm/ltdc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index c2815e8ae1da2..ea654c7280f7e 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -648,9 +648,14 @@ static const struct drm_crtc_helper_funcs ltdc_crtc_helper_funcs = {
 static int ltdc_crtc_enable_vblank(struct drm_crtc *crtc)
 {
 	struct ltdc_device *ldev = crtc_to_ltdc(crtc);
+	struct drm_crtc_state *state = crtc->state;
 
 	DRM_DEBUG_DRIVER("\n");
-	reg_set(ldev->regs, LTDC_IER, IER_LIE);
+
+	if (state->enable)
+		reg_set(ldev->regs, LTDC_IER, IER_LIE);
+	else
+		return -EPERM;
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 073/149] fbdev: potential information leak in do_fb_ioctl()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d3d19d6fc5736a798b118971935ce274f7deaa82 ]

The "fix" struct has a 2 byte hole after ->ywrapstep and the
"fix = info->fix;" assignment doesn't necessarily clear it.  It depends
on the compiler.  The solution is just to replace the assignment with an
memcpy().

Fixes: 1f5e31d7e55a ("fbmem: don't call copy_from/to_user() with mutex held")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbmem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index d04554959ea7e..bb8d8dbc0461c 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1115,7 +1115,7 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
 		break;
 	case FBIOGET_FSCREENINFO:
 		lock_fb_info(info);
-		fix = info->fix;
+		memcpy(&fix, &info->fix, sizeof(fix));
 		if (info->flags & FBINFO_HIDE_SMEM_START)
 			fix.smem_start = 0;
 		unlock_fb_info(info);
-- 
2.20.1

[PATCH AUTOSEL 5.6 074/149] drm/crc: Actually allow to change the crc source

[Sasha Levin]

From: Daniel Vetter <daniel.vetter@ffwll.ch>

[ Upstream commit 3cb6d8e5cf9811a62e27f366fd1c05f90310a8fd ]

Oops.

Fixes: 9edbf1fa600a ("drm: Add API for capturing frame CRCs")
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821203835.18314-1-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_debugfs_crc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_debugfs_crc.c b/drivers/gpu/drm/drm_debugfs_crc.c
index e22b812c4b802..5d67a41f7c3a8 100644
--- a/drivers/gpu/drm/drm_debugfs_crc.c
+++ b/drivers/gpu/drm/drm_debugfs_crc.c
@@ -372,7 +372,7 @@ void drm_debugfs_crtc_crc_add(struct drm_crtc *crtc)
 
 	crc_ent = debugfs_create_dir("crc", crtc->debugfs_entry);
 
-	debugfs_create_file("control", S_IRUGO, crc_ent, crtc,
+	debugfs_create_file("control", S_IRUGO | S_IWUSR, crc_ent, crtc,
 			    &drm_crtc_crc_control_fops);
 	debugfs_create_file("data", S_IRUGO, crc_ent, crtc,
 			    &drm_crtc_crc_data_fops);
-- 
2.20.1

[PATCH AUTOSEL 5.6 075/149] drm/amdgpu: fix parentheses in amdgpu_vm_update_ptes

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit bfcd6c69e4c3f73f2f92b997983537f9a3ac3b29 ]

For the root PD mask can be 0xffffffff as well which would
overrun to 0 if we don't cast it before we add one.

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index d16231d6a790b..67e7422032265 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -1498,7 +1498,7 @@ static int amdgpu_vm_update_ptes(struct amdgpu_vm_update_params *params,
 		incr = (uint64_t)AMDGPU_GPU_PAGE_SIZE << shift;
 		mask = amdgpu_vm_entries_mask(adev, cursor.level);
 		pe_start = ((cursor.pfn >> shift) & mask) * 8;
-		entry_end = (uint64_t)(mask + 1) << shift;
+		entry_end = ((uint64_t)mask + 1) << shift;
 		entry_end += cursor.pfn & ~(entry_end - 1);
 		entry_end = min(entry_end, end);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 076/149] drm/amd/display: dc_get_vmid_use_vector() crashes when get called

[Sasha Levin]

From: Peikang Zhang <peikang.zhang@amd.com>

[ Upstream commit 68bbca15e7062f4ae16531e29893f78d0b4840b6 ]

[Why]
int i can go out of boundary which will cause crash

[How]
Fixed the maximum value of i to avoid i going out of boundary

Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_vm_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_vm_helper.c b/drivers/gpu/drm/amd/display/dc/core/dc_vm_helper.c
index a96d8de9380e6..f2b39ec35c898 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_vm_helper.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_vm_helper.c
@@ -62,7 +62,7 @@ int dc_get_vmid_use_vector(struct dc *dc)
 	int i;
 	int in_use = 0;
 
-	for (i = 0; i < dc->vm_helper->num_vmid; i++)
+	for (i = 0; i < MAX_HUBP; i++)
 		in_use |= dc->vm_helper->hubp_vmid_usage[i].vmid_usage[0]
 			| dc->vm_helper->hubp_vmid_usage[i].vmid_usage[1];
 	return in_use;
-- 
2.20.1

[PATCH AUTOSEL 5.6 077/149] scsi: lpfc: Fix RQ buffer leakage when no IOCBs available

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 39c4f1a965a9244c3ba60695e8ff8da065ec6ac4 ]

The driver is occasionally seeing the following SLI Port error, requiring
reset and reinit:

 Port Status Event: ... error 1=0x52004a01, error 2=0x218

The failure means an RQ timeout. That is, the adapter had received
asynchronous receive frames, ran out of buffer slots to place the frames,
and the driver did not replenish the buffer slots before a timeout
occurred. The driver should not be so slow in replenishing buffers that a
timeout can occur.

When the driver received all the frames of a sequence, it allocates an IOCB
to put the frames in. In a situation where there was no IOCB available for
the frame of a sequence, the RQ buffer corresponding to the first frame of
the sequence was not returned to the FW. Eventually, with enough traffic
encountering the situation, the timeout occurred.

Fix by releasing the buffer back to firmware whenever there is no IOCB for
the first frame.

[mkp: typo]

Link: https://lore.kernel.org/r/20200128002312.16346-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 64002b0cb02d4..ab6f58bc80a48 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -17950,6 +17950,10 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
 			list_add_tail(&iocbq->list, &first_iocbq->list);
 		}
 	}
+	/* Free the sequence's header buffer */
+	if (!first_iocbq)
+		lpfc_in_buf_free(vport->phba, &seq_dmabuf->dbuf);
+
 	return first_iocbq;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 078/149] ath11k: fix warn-on in disassociation

[Sasha Levin]

From: Karthikeyan Periyasamy <periyasa@codeaurora.org>

[ Upstream commit 79c080dbe35baaa1d46b241047a9dde745fc12eb ]

In multi AP VAP scenario, when user bring down the interfaces. mac80211 mark
the interface down for the duplicated VAP and removed from the
local->interfaces list. ath11k_mac_get_arvif() is dependent on
ieee80211_iterate_active_interfaces_atomic() API to find the vdev id
in a given radio. In disassociation path, ath11k_mac_get_arvif() not
able to find the given vdev id since that VAP is removed from the
local->interfaces list. since sta_state callback throws error, mac80211 log
the below WARN_ON_ONCE message.

Fixed it by storing the allocated_vdev_map in each radio structure to maintain
the created vdev id bits. so that we can directly mask this against the given
vdev_id to find out the ar from the vdev_id.

WARN LOG:

WARNING: at net/mac80211/sta_info.c:1008
CPU: 2 PID: 2135 Comm: hostapd Not tainted #1
Hardware name: Qualcomm Technologies, Inc. IPQ807x/AP-HK01-C1 (DT)
task: ffffffc03a43d800 ti: ffffffc03a43d800 task.ti: ffffffc03a43d800
PC is at sta_set_sinfo+0x9dc/0xad4 [mac80211]
LR is at sta_set_sinfo+0x9cc/0xad4 [mac80211]
pc : [<ffffffbffce2a008>] lr : [<ffffffbffce29ff8>] pstate: 20000145
sp : ffffffc02cedb5f0
x29: ffffffc02cedb5f0 x28: ffffffc03a43d800
x27: 0000000000000014 x26: 0000000000000001
x25: ffffffc02cfc4000 x24: ffffffc036905508
x23: 0000000000000012 x22: ffffffc02cedb670
x21: ffffffc03bc64880 x20: ffffffc036904f80
x19: ffffffc02ae31000 x18: 00000000b019f3a1
x17: 0000000057f30331 x16: 00000000d8d1998e
x15: 0000000000000066 x14: 393a35383a36343a
x13: 6337203a6e6f6974 x12: 6174732065746169
x11: 636f737361736964 x10: 206f742064656c69
x9 : 6146203a31696669 x8 : 6337203a6e6f6974
x7 : 6174732065746169 x6 : ffffffc0008c33f6
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : 00000000ffffff92
x1 : 0000000000000000 x0 : ffffffbffcea1091
---[ end trace 63c4b1c527345d5a ]---
Call trace:
[<ffffffbffce2a008>] sta_set_sinfo+0x9dc/0xad4 [mac80211]
[<ffffffbffce2a2c4>] __sta_info_flush+0xec/0x130 [mac80211]
[<ffffffbffce3dc48>] ieee80211_nan_func_match+0x1a34/0x23e4 [mac80211]
[<ffffffbffcde03e0>] __cfg80211_stop_ap+0x60/0xf0 [cfg80211]
[<ffffffbffcdb6d08>] __cfg80211_leave+0x110/0x150 [cfg80211]
[<ffffffbffcdb6d78>] cfg80211_leave+0x30/0x48 [cfg80211]
[<ffffffbffcdb6fbc>] cfg80211_init_wdev+0x22c/0x808 [cfg80211]
[<ffffffc0000afe28>] notifier_call_chain+0x50/0x84
[<ffffffc0000afefc>] raw_notifier_call_chain+0x14/0x1c
[<ffffffc0004ae94c>] call_netdevice_notifiers_info+0x5c/0x6c
[<ffffffc0004ae96c>] call_netdevice_notifiers+0x10/0x18
[<ffffffc0004aea80>] __dev_close_many+0x54/0xc0
[<ffffffc0004aeb50>] dev_close_many+0x64/0xdc
[<ffffffc0004b0b70>] rollback_registered_many+0x138/0x2f4
[<ffffffc0004b0d4c>] rollback_registered+0x20/0x34
[<ffffffc0004b34b4>] unregister_netdevice_queue+0x68/0xa8
[<ffffffbffce3870c>] ieee80211_if_remove+0x84/0xc0 [mac80211]
[<ffffffbffce3e588>] ieee80211_nan_func_match+0x2374/0x23e4 [mac80211]
[<ffffffbffcdc29e8>] cfg80211_wext_giwscan+0x1000/0x1140 [cfg80211]
[<ffffffbffcb2a87c>] backport_genlmsg_multicast_allns+0x158/0x1b4 [compat]
[<ffffffc0004e0944>] genl_family_rcv_msg+0x258/0x2c0
[<ffffffc0004e09f4>] genl_rcv_msg+0x48/0x6c
[<ffffffc0004dfb50>] netlink_rcv_skb+0x5c/0xc4
[<ffffffc0004e06d8>] genl_rcv+0x34/0x48
[<ffffffc0004df570>] netlink_unicast+0x12c/0x1e0
[<ffffffc0004df9a4>] netlink_sendmsg+0x2bc/0x2dc
[<ffffffc00049a540>] sock_sendmsg+0x18/0x2c
[<ffffffc00049ab94>] ___sys_sendmsg+0x1bc/0x248
[<ffffffc00049ba24>] __sys_sendmsg+0x40/0x68
[<ffffffc00049ba5c>] SyS_sendmsg+0x10/0x20
[<ffffffc000085db0>] el0_svc_naked+0x24/0x28

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/core.c |  1 +
 drivers/net/wireless/ath/ath11k/core.h |  1 +
 drivers/net/wireless/ath/ath11k/mac.c  | 18 +++++++++++-------
 3 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 9e823056e6735..6a30601a12e8c 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -607,6 +607,7 @@ void ath11k_core_halt(struct ath11k *ar)
 	lockdep_assert_held(&ar->conf_mutex);
 
 	ar->num_created_vdevs = 0;
+	ar->allocated_vdev_map = 0;
 
 	ath11k_mac_scan_finish(ar);
 	ath11k_mac_peer_cleanup_all(ar);
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index 25cdcf71d0c48..987f62bdb9ca3 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -486,6 +486,7 @@ struct ath11k {
 	int max_num_peers;
 	u32 num_started_vdevs;
 	u32 num_created_vdevs;
+	unsigned long long allocated_vdev_map;
 
 	struct idr txmgmt_idr;
 	/* protects txmgmt_idr data */
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 6640662f5ede0..78f20ba47b37e 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -369,8 +369,10 @@ struct ath11k_vif *ath11k_mac_get_arvif(struct ath11k *ar, u32 vdev_id)
 						   flags,
 						   ath11k_get_arvif_iter,
 						   &arvif_iter);
-	if (!arvif_iter.arvif)
+	if (!arvif_iter.arvif) {
+		ath11k_warn(ar->ab, "No VIF found for vdev %d\n", vdev_id);
 		return NULL;
+	}
 
 	return arvif_iter.arvif;
 }
@@ -398,14 +400,12 @@ struct ath11k *ath11k_mac_get_ar_by_vdev_id(struct ath11k_base *ab, u32 vdev_id)
 {
 	int i;
 	struct ath11k_pdev *pdev;
-	struct ath11k_vif *arvif;
 
 	for (i = 0; i < ab->num_radios; i++) {
 		pdev = rcu_dereference(ab->pdevs_active[i]);
 		if (pdev && pdev->ar) {
-			arvif = ath11k_mac_get_arvif(pdev->ar, vdev_id);
-			if (arvif)
-				return arvif->ar;
+			if (pdev->ar->allocated_vdev_map & (1LL << vdev_id))
+				return pdev->ar;
 		}
 	}
 
@@ -3874,6 +3874,7 @@ static int ath11k_mac_op_start(struct ieee80211_hw *hw)
 	ar->num_started_vdevs = 0;
 	ar->num_created_vdevs = 0;
 	ar->num_peers = 0;
+	ar->allocated_vdev_map = 0;
 
 	/* Configure monitor status ring with default rx_filter to get rx status
 	 * such as rssi, rx_duration.
@@ -4112,8 +4113,9 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
 	}
 
 	ar->num_created_vdevs++;
-
+	ar->allocated_vdev_map |= 1LL << arvif->vdev_id;
 	ab->free_vdev_map &= ~(1LL << arvif->vdev_id);
+
 	spin_lock_bh(&ar->data_lock);
 	list_add(&arvif->list, &ar->arvifs);
 	spin_unlock_bh(&ar->data_lock);
@@ -4227,6 +4229,7 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
 err_vdev_del:
 	ath11k_wmi_vdev_delete(ar, arvif->vdev_id);
 	ar->num_created_vdevs--;
+	ar->allocated_vdev_map &= ~(1LL << arvif->vdev_id);
 	ab->free_vdev_map |= 1LL << arvif->vdev_id;
 	spin_lock_bh(&ar->data_lock);
 	list_del(&arvif->list);
@@ -4263,7 +4266,6 @@ static void ath11k_mac_op_remove_interface(struct ieee80211_hw *hw,
 	ath11k_dbg(ab, ATH11K_DBG_MAC, "mac remove interface (vdev %d)\n",
 		   arvif->vdev_id);
 
-	ab->free_vdev_map |= 1LL << (arvif->vdev_id);
 	spin_lock_bh(&ar->data_lock);
 	list_del(&arvif->list);
 	spin_unlock_bh(&ar->data_lock);
@@ -4281,6 +4283,8 @@ static void ath11k_mac_op_remove_interface(struct ieee80211_hw *hw,
 			    arvif->vdev_id, ret);
 
 	ar->num_created_vdevs--;
+	ar->allocated_vdev_map &= ~(1LL << arvif->vdev_id);
+	ab->free_vdev_map |= 1LL << (arvif->vdev_id);
 
 	ath11k_peer_cleanup(ar, arvif->vdev_id);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 079/149] ath11k: Fixing dangling pointer issue upon peer delete failure

[Sasha Levin]

From: Vikas Patel <vikpatel@codeaurora.org>

[ Upstream commit 58595c9874c625ceb7004960d8e53b9226abdc92 ]

When there is WMI command failure, 'peer->sta' was not getting
cleaned up, and mac80211 frees the 'sta' memory, which is causing
the below page fault.

Cleaning up the sta pointer in ath11k whenever peer delete command
is sent.

Unable to handle kernel paging request at virtual address 200080000006a
pgd = ffffffc02a774000
[200080000006a] *pgd=0000000000000000, *pud=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
.
.
.
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W       4.4.60 #1
Hardware name: Qualcomm Technologies, Inc. IPQ807x/AP-HK01-C1 (DT)
task: ffffffc00083c6d0 ti: ffffffc00083c6d0 task.ti: ffffffc00083c6d0
PC is at ath11k_dp_rx_process_mon_status+0x114/0x4e0 [ath11k]
LR is at ath11k_dp_rx_process_mon_status+0xe8/0x4e0 [ath11k]
pc : [<ffffffbffcf8e544>] lr : [<ffffffbffcf8e518>] pstate: 60000145
sp : ffffffc000833a30

Signed-off-by: Vikas Patel <vikpatel@codeaurora.org>
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 78f20ba47b37e..e89790a01c48b 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2786,6 +2786,7 @@ static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw,
 	struct ath11k *ar = hw->priv;
 	struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
 	struct ath11k_sta *arsta = (struct ath11k_sta *)sta->drv_priv;
+	struct ath11k_peer *peer;
 	int ret = 0;
 
 	/* cancel must be done outside the mutex to avoid deadlock */
@@ -2818,6 +2819,17 @@ static int ath11k_mac_op_sta_state(struct ieee80211_hw *hw,
 				   sta->addr, arvif->vdev_id);
 
 		ath11k_mac_dec_num_stations(arvif, sta);
+		spin_lock_bh(&ar->ab->base_lock);
+		peer = ath11k_peer_find(ar->ab, arvif->vdev_id, sta->addr);
+		if (peer && peer->sta == sta) {
+			ath11k_warn(ar->ab, "Found peer entry %pM n vdev %i after it was supposedly removed\n",
+				    vif->addr, arvif->vdev_id);
+			peer->sta = NULL;
+			list_del(&peer->list);
+			kfree(peer);
+			ar->num_peers--;
+		}
+		spin_unlock_bh(&ar->ab->base_lock);
 
 		kfree(arsta->tx_stats);
 		arsta->tx_stats = NULL;
-- 
2.20.1

[PATCH AUTOSEL 5.6 080/149] rsi: fix null pointer dereference during rsi_shutdown()

[Sasha Levin]

From: Martin Kepplinger <martin.kepplinger@puri.sm>

[ Upstream commit 16bbc3eb83728c03138191a5d23d84d38175fa26 ]

Appearently the hw pointer can be NULL while the module is loaded and
in that case rsi_shutdown() crashes due to the unconditional dereference.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_sdio.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
index 1bebba4e85273..5d6143a551877 100644
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -1468,12 +1468,15 @@ static void rsi_shutdown(struct device *dev)
 	struct rsi_91x_sdiodev *sdev =
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	struct ieee80211_hw *hw = adapter->hw;
-	struct cfg80211_wowlan *wowlan = hw->wiphy->wowlan_config;
 
 	rsi_dbg(ERR_ZONE, "SDIO Bus shutdown =====>\n");
 
-	if (rsi_config_wowlan(adapter, wowlan))
-		rsi_dbg(ERR_ZONE, "Failed to configure WoWLAN\n");
+	if (hw) {
+		struct cfg80211_wowlan *wowlan = hw->wiphy->wowlan_config;
+
+		if (rsi_config_wowlan(adapter, wowlan))
+			rsi_dbg(ERR_ZONE, "Failed to configure WoWLAN\n");
+	}
 
 	if (IS_ENABLED(CONFIG_RSI_COEX) && adapter->priv->coex_mode > 1 &&
 	    adapter->priv->bt_adapter) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 081/149] ASoC: mediatek: mt8183-da7219: pull TDM GPIO pins down when probed

[Sasha Levin]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 8726ee6148fe24e2b29d4a961ad95c4ff8025d1d ]

1. Switch TDM GPIO pins according to playback on or off.
2. Pull TDM GPIO pins down when probed to avoid current leakage.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200213112003.2.I1d568b0c99742c6e755d051aadfd52e4be3cc0a5@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../mediatek/mt8183/mt8183-da7219-max98357.c  | 104 +++++++++++++++++-
 1 file changed, 98 insertions(+), 6 deletions(-)

diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
index c65493721e90d..a3974b0a90157 100644
--- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
@@ -18,6 +18,22 @@
 
 static struct snd_soc_jack headset_jack;
 
+enum PINCTRL_PIN_STATE {
+	PIN_STATE_DEFAULT = 0,
+	PIN_TDM_OUT_ON,
+	PIN_TDM_OUT_OFF,
+	PIN_STATE_MAX
+};
+
+static const char * const mt8183_pin_str[PIN_STATE_MAX] = {
+	"default", "aud_tdm_out_on", "aud_tdm_out_off",
+};
+
+struct mt8183_da7219_max98357_priv {
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pin_states[PIN_STATE_MAX];
+};
+
 static int mt8183_mt6358_i2s_hw_params(struct snd_pcm_substream *substream,
 				       struct snd_pcm_hw_params *params)
 {
@@ -204,6 +220,47 @@ SND_SOC_DAILINK_DEFS(tdm,
 	DAILINK_COMP_ARRAY(COMP_DUMMY()),
 	DAILINK_COMP_ARRAY(COMP_EMPTY()));
 
+static int mt8183_da7219_tdm_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct mt8183_da7219_max98357_priv *priv =
+		snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	if (IS_ERR(priv->pin_states[PIN_TDM_OUT_ON]))
+		return PTR_ERR(priv->pin_states[PIN_TDM_OUT_ON]);
+
+	ret = pinctrl_select_state(priv->pinctrl,
+				   priv->pin_states[PIN_TDM_OUT_ON]);
+	if (ret)
+		dev_err(rtd->card->dev, "%s failed to select state %d\n",
+			__func__, ret);
+
+	return ret;
+}
+
+static void mt8183_da7219_tdm_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct mt8183_da7219_max98357_priv *priv =
+		snd_soc_card_get_drvdata(rtd->card);
+	int ret;
+
+	if (IS_ERR(priv->pin_states[PIN_TDM_OUT_OFF]))
+		return;
+
+	ret = pinctrl_select_state(priv->pinctrl,
+				   priv->pin_states[PIN_TDM_OUT_OFF]);
+	if (ret)
+		dev_err(rtd->card->dev, "%s failed to select state %d\n",
+			__func__, ret);
+}
+
+static struct snd_soc_ops mt8183_da7219_tdm_ops = {
+	.startup = mt8183_da7219_tdm_startup,
+	.shutdown = mt8183_da7219_tdm_shutdown,
+};
+
 static struct snd_soc_dai_link mt8183_da7219_max98357_dai_links[] = {
 	/* FE */
 	{
@@ -353,6 +410,8 @@ static struct snd_soc_dai_link mt8183_da7219_max98357_dai_links[] = {
 		.no_pcm = 1,
 		.dpcm_playback = 1,
 		.ignore_suspend = 1,
+		.be_hw_params_fixup = mt8183_i2s_hw_params_fixup,
+		.ops = &mt8183_da7219_tdm_ops,
 		SND_SOC_DAILINK_REG(tdm),
 	},
 };
@@ -409,7 +468,7 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
 	struct snd_soc_card *card = &mt8183_da7219_max98357_card;
 	struct device_node *platform_node;
 	struct snd_soc_dai_link *dai_link;
-	struct pinctrl *default_pins;
+	struct mt8183_da7219_max98357_priv *priv;
 	int ret, i;
 
 	card->dev = &pdev->dev;
@@ -443,12 +502,45 @@ static int mt8183_da7219_max98357_dev_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	default_pins =
-		devm_pinctrl_get_select(&pdev->dev, PINCTRL_STATE_DEFAULT);
-	if (IS_ERR(default_pins)) {
-		dev_err(&pdev->dev, "%s set pins failed\n",
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	snd_soc_card_set_drvdata(card, priv);
+
+	priv->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(priv->pinctrl)) {
+		dev_err(&pdev->dev, "%s devm_pinctrl_get failed\n",
 			__func__);
-		return PTR_ERR(default_pins);
+		return PTR_ERR(priv->pinctrl);
+	}
+
+	for (i = 0; i < PIN_STATE_MAX; i++) {
+		priv->pin_states[i] = pinctrl_lookup_state(priv->pinctrl,
+							   mt8183_pin_str[i]);
+		if (IS_ERR(priv->pin_states[i])) {
+			ret = PTR_ERR(priv->pin_states[i]);
+			dev_info(&pdev->dev, "%s Can't find pin state %s %d\n",
+				 __func__, mt8183_pin_str[i], ret);
+		}
+	}
+
+	if (!IS_ERR(priv->pin_states[PIN_TDM_OUT_OFF])) {
+		ret = pinctrl_select_state(priv->pinctrl,
+					   priv->pin_states[PIN_TDM_OUT_OFF]);
+		if (ret)
+			dev_info(&pdev->dev,
+				 "%s failed to select state %d\n",
+				 __func__, ret);
+	}
+
+	if (!IS_ERR(priv->pin_states[PIN_STATE_DEFAULT])) {
+		ret = pinctrl_select_state(priv->pinctrl,
+					   priv->pin_states[PIN_STATE_DEFAULT]);
+		if (ret)
+			dev_info(&pdev->dev,
+				 "%s failed to select state %d\n",
+				 __func__, ret);
 	}
 
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.6 082/149] RDMA/hns: Add the workqueue framework for flush cqe handler

[Sasha Levin]

From: Yixian Liu <liuyixian@huawei.com>

[ Upstream commit ffd541d45726341c1830ff595fd7352b6d1cfbcd ]

HiP08 RoCE hardware lacks ability(a known hardware problem) to flush
outstanding WQEs if QP state gets into errored mode for some reason.  To
overcome this hardware problem and as a workaround, when QP is detected to
be in errored state during various legs like post send, post receive etc
[1], flush needs to be performed from the driver.

The earlier patch[1] sent to solve the hardware limitation explained in
the cover-letter had a bug in the software flushing leg. It acquired mutex
while modifying QP state to errored state and while conveying it to the
hardware using the mailbox. This caused leg to sleep while holding
spin-lock and caused crash.

Suggested Solution:
we have proposed to defer the flushing of the QP in the Errored state
using the workqueue to get around with the limitation of our hardware.

This patch adds the framework of the workqueue and the flush handler
function.

[1] https://patchwork.kernel.org/patch/10534271/

Link: https://lore.kernel.org/r/1580983005-13899-2-git-send-email-liuyixian@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hns/hns_roce_device.h | 20 ++++++-----
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c  |  3 +-
 drivers/infiniband/hw/hns/hns_roce_qp.c     | 37 +++++++++++++++++++++
 3 files changed, 49 insertions(+), 11 deletions(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h
index a7c4ff975c289..a089d47354391 100644
--- a/drivers/infiniband/hw/hns/hns_roce_device.h
+++ b/drivers/infiniband/hw/hns/hns_roce_device.h
@@ -641,6 +641,15 @@ struct hns_roce_rinl_buf {
 	u32			 wqe_cnt;
 };
 
+struct hns_roce_work {
+	struct hns_roce_dev *hr_dev;
+	struct work_struct work;
+	u32 qpn;
+	u32 cqn;
+	int event_type;
+	int sub_type;
+};
+
 struct hns_roce_qp {
 	struct ib_qp		ibqp;
 	struct hns_roce_buf	hr_buf;
@@ -684,6 +693,7 @@ struct hns_roce_qp {
 	struct hns_roce_sge	sge;
 	u32			next_sge;
 
+	struct hns_roce_work	flush_work;
 	struct hns_roce_rinl_buf rq_inl_buf;
 	struct list_head	node;		/* all qps are on a list */
 	struct list_head	rq_node;	/* all recv qps are on a list */
@@ -906,15 +916,6 @@ struct hns_roce_caps {
 	u16		default_ceq_arm_st;
 };
 
-struct hns_roce_work {
-	struct hns_roce_dev *hr_dev;
-	struct work_struct work;
-	u32 qpn;
-	u32 cqn;
-	int event_type;
-	int sub_type;
-};
-
 struct hns_roce_dfx_hw {
 	int (*query_cqc_info)(struct hns_roce_dev *hr_dev, u32 cqn,
 			      int *buffer);
@@ -1237,6 +1238,7 @@ struct ib_qp *hns_roce_create_qp(struct ib_pd *ib_pd,
 				 struct ib_udata *udata);
 int hns_roce_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		       int attr_mask, struct ib_udata *udata);
+void init_flush_work(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp);
 void *get_recv_wqe(struct hns_roce_qp *hr_qp, int n);
 void *get_send_wqe(struct hns_roce_qp *hr_qp, int n);
 void *get_send_extend_sge(struct hns_roce_qp *hr_qp, int n);
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 12c4cd8e9378c..950c604a6fcb4 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -6292,8 +6292,7 @@ static int hns_roce_v2_init_eq_table(struct hns_roce_dev *hr_dev)
 		goto err_request_irq_fail;
 	}
 
-	hr_dev->irq_workq =
-		create_singlethread_workqueue("hns_roce_irq_workqueue");
+	hr_dev->irq_workq = alloc_ordered_workqueue("hns_roce_irq_workq", 0);
 	if (!hr_dev->irq_workq) {
 		dev_err(dev, "Create irq workqueue failed!\n");
 		ret = -ENOMEM;
diff --git a/drivers/infiniband/hw/hns/hns_roce_qp.c b/drivers/infiniband/hw/hns/hns_roce_qp.c
index 3257ad11be482..dab73140c5c29 100644
--- a/drivers/infiniband/hw/hns/hns_roce_qp.c
+++ b/drivers/infiniband/hw/hns/hns_roce_qp.c
@@ -43,6 +43,43 @@
 
 #define SQP_NUM				(2 * HNS_ROCE_MAX_PORTS)
 
+static void flush_work_handle(struct work_struct *work)
+{
+	struct hns_roce_work *flush_work = container_of(work,
+					struct hns_roce_work, work);
+	struct hns_roce_qp *hr_qp = container_of(flush_work,
+					struct hns_roce_qp, flush_work);
+	struct device *dev = flush_work->hr_dev->dev;
+	struct ib_qp_attr attr;
+	int attr_mask;
+	int ret;
+
+	attr_mask = IB_QP_STATE;
+	attr.qp_state = IB_QPS_ERR;
+
+	ret = hns_roce_modify_qp(&hr_qp->ibqp, &attr, attr_mask, NULL);
+	if (ret)
+		dev_err(dev, "Modify QP to error state failed(%d) during CQE flush\n",
+			ret);
+
+	/*
+	 * make sure we signal QP destroy leg that flush QP was completed
+	 * so that it can safely proceed ahead now and destroy QP
+	 */
+	if (atomic_dec_and_test(&hr_qp->refcount))
+		complete(&hr_qp->free);
+}
+
+void init_flush_work(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp)
+{
+	struct hns_roce_work *flush_work = &hr_qp->flush_work;
+
+	flush_work->hr_dev = hr_dev;
+	INIT_WORK(&flush_work->work, flush_work_handle);
+	atomic_inc(&hr_qp->refcount);
+	queue_work(hr_dev->irq_workq, &flush_work->work);
+}
+
 void hns_roce_qp_event(struct hns_roce_dev *hr_dev, u32 qpn, int event_type)
 {
 	struct device *dev = hr_dev->dev;
-- 
2.20.1

[PATCH AUTOSEL 5.6 083/149] RDMA/hns: Delayed flush cqe process with workqueue

[Sasha Levin]

From: Yixian Liu <liuyixian@huawei.com>

[ Upstream commit b53742865e9f09cbba4d9daa161760ec23f36aa4 ]

HiP08 RoCE hardware lacks ability(a known hardware problem) to flush
outstanding WQEs if QP state gets into errored mode for some reason.  To
overcome this hardware problem and as a workaround, when QP is detected to
be in errored state during various legs like post send, post receive
etc[1], flush needs to be performed from the driver.

The earlier patch[1] sent to solve the hardware limitation explained in
the cover-letter had a bug in the software flushing leg. It acquired mutex
while modifying QP state to errored state and while conveying it to the
hardware using the mailbox. This caused leg to sleep while holding
spin-lock and caused crash.

Suggested Solution: we have proposed to defer the flushing of the QP in
the Errored state using the workqueue to get around with the limitation of
our hardware.

This patch specifically adds the calls to the flush handler from where
parts of the code like post_send/post_recv etc. when the QP state gets
into the errored mode.

[1] https://patchwork.kernel.org/patch/10534271/

Link: https://lore.kernel.org/r/1580983005-13899-3-git-send-email-liuyixian@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Reviewed-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hns/hns_roce_device.h |  6 ++
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c  | 99 +++++++++++----------
 drivers/infiniband/hw/hns/hns_roce_qp.c     | 11 ++-
 3 files changed, 66 insertions(+), 50 deletions(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h
index a089d47354391..96d7bfa2dd8c8 100644
--- a/drivers/infiniband/hw/hns/hns_roce_device.h
+++ b/drivers/infiniband/hw/hns/hns_roce_device.h
@@ -641,6 +641,10 @@ struct hns_roce_rinl_buf {
 	u32			 wqe_cnt;
 };
 
+enum {
+	HNS_ROCE_FLUSH_FLAG = 0,
+};
+
 struct hns_roce_work {
 	struct hns_roce_dev *hr_dev;
 	struct work_struct work;
@@ -693,6 +697,8 @@ struct hns_roce_qp {
 	struct hns_roce_sge	sge;
 	u32			next_sge;
 
+	/* 0: flush needed, 1: unneeded */
+	unsigned long		flush_flag;
 	struct hns_roce_work	flush_work;
 	struct hns_roce_rinl_buf rq_inl_buf;
 	struct list_head	node;		/* all qps are on a list */
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 950c604a6fcb4..d33d9ebe628df 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -220,11 +220,6 @@ static int set_rwqe_data_seg(struct ib_qp *ibqp, const struct ib_send_wr *wr,
 	return 0;
 }
 
-static int hns_roce_v2_modify_qp(struct ib_qp *ibqp,
-				 const struct ib_qp_attr *attr,
-				 int attr_mask, enum ib_qp_state cur_state,
-				 enum ib_qp_state new_state);
-
 static int check_send_valid(struct hns_roce_dev *hr_dev,
 			    struct hns_roce_qp *hr_qp)
 {
@@ -261,7 +256,6 @@ static int hns_roce_v2_post_send(struct ib_qp *ibqp,
 	struct hns_roce_wqe_frmr_seg *fseg;
 	struct device *dev = hr_dev->dev;
 	struct hns_roce_v2_db sq_db;
-	struct ib_qp_attr attr;
 	unsigned int owner_bit;
 	unsigned int sge_idx;
 	unsigned int wqe_idx;
@@ -269,7 +263,6 @@ static int hns_roce_v2_post_send(struct ib_qp *ibqp,
 	int valid_num_sge;
 	void *wqe = NULL;
 	bool loopback;
-	int attr_mask;
 	u32 tmp_len;
 	u32 hr_op;
 	u8 *smac;
@@ -607,18 +600,19 @@ static int hns_roce_v2_post_send(struct ib_qp *ibqp,
 
 		qp->next_sge = sge_idx;
 
-		if (qp->state == IB_QPS_ERR) {
-			attr_mask = IB_QP_STATE;
-			attr.qp_state = IB_QPS_ERR;
-
-			ret = hns_roce_v2_modify_qp(&qp->ibqp, &attr, attr_mask,
-						    qp->state, IB_QPS_ERR);
-			if (ret) {
-				spin_unlock_irqrestore(&qp->sq.lock, flags);
-				*bad_wr = wr;
-				return ret;
-			}
-		}
+		/*
+		 * Hip08 hardware cannot flush the WQEs in SQ if the QP state
+		 * gets into errored mode. Hence, as a workaround to this
+		 * hardware limitation, driver needs to assist in flushing. But
+		 * the flushing operation uses mailbox to convey the QP state to
+		 * the hardware and which can sleep due to the mutex protection
+		 * around the mailbox calls. Hence, use the deferred flush for
+		 * now.
+		 */
+		if (qp->state == IB_QPS_ERR)
+			if (!test_and_set_bit(HNS_ROCE_FLUSH_FLAG,
+					      &qp->flush_flag))
+				init_flush_work(hr_dev, qp);
 	}
 
 	spin_unlock_irqrestore(&qp->sq.lock, flags);
@@ -646,10 +640,8 @@ static int hns_roce_v2_post_recv(struct ib_qp *ibqp,
 	struct hns_roce_v2_wqe_data_seg *dseg;
 	struct hns_roce_rinl_sge *sge_list;
 	struct device *dev = hr_dev->dev;
-	struct ib_qp_attr attr;
 	unsigned long flags;
 	void *wqe = NULL;
-	int attr_mask;
 	u32 wqe_idx;
 	int nreq;
 	int ret;
@@ -719,19 +711,19 @@ static int hns_roce_v2_post_recv(struct ib_qp *ibqp,
 
 		*hr_qp->rdb.db_record = hr_qp->rq.head & 0xffff;
 
-		if (hr_qp->state == IB_QPS_ERR) {
-			attr_mask = IB_QP_STATE;
-			attr.qp_state = IB_QPS_ERR;
-
-			ret = hns_roce_v2_modify_qp(&hr_qp->ibqp, &attr,
-						    attr_mask, hr_qp->state,
-						    IB_QPS_ERR);
-			if (ret) {
-				spin_unlock_irqrestore(&hr_qp->rq.lock, flags);
-				*bad_wr = wr;
-				return ret;
-			}
-		}
+		/*
+		 * Hip08 hardware cannot flush the WQEs in RQ if the QP state
+		 * gets into errored mode. Hence, as a workaround to this
+		 * hardware limitation, driver needs to assist in flushing. But
+		 * the flushing operation uses mailbox to convey the QP state to
+		 * the hardware and which can sleep due to the mutex protection
+		 * around the mailbox calls. Hence, use the deferred flush for
+		 * now.
+		 */
+		if (hr_qp->state == IB_QPS_ERR)
+			if (!test_and_set_bit(HNS_ROCE_FLUSH_FLAG,
+					      &hr_qp->flush_flag))
+				init_flush_work(hr_dev, hr_qp);
 	}
 	spin_unlock_irqrestore(&hr_qp->rq.lock, flags);
 
@@ -3013,13 +3005,11 @@ static int hns_roce_v2_sw_poll_cq(struct hns_roce_cq *hr_cq, int num_entries,
 static int hns_roce_v2_poll_one(struct hns_roce_cq *hr_cq,
 				struct hns_roce_qp **cur_qp, struct ib_wc *wc)
 {
+	struct hns_roce_dev *hr_dev = to_hr_dev(hr_cq->ib_cq.device);
 	struct hns_roce_srq *srq = NULL;
-	struct hns_roce_dev *hr_dev;
 	struct hns_roce_v2_cqe *cqe;
 	struct hns_roce_qp *hr_qp;
 	struct hns_roce_wq *wq;
-	struct ib_qp_attr attr;
-	int attr_mask;
 	int is_send;
 	u16 wqe_ctr;
 	u32 opcode;
@@ -3043,7 +3033,6 @@ static int hns_roce_v2_poll_one(struct hns_roce_cq *hr_cq,
 				V2_CQE_BYTE_16_LCL_QPN_S);
 
 	if (!*cur_qp || (qpn & HNS_ROCE_V2_CQE_QPN_MASK) != (*cur_qp)->qpn) {
-		hr_dev = to_hr_dev(hr_cq->ib_cq.device);
 		hr_qp = __hns_roce_qp_lookup(hr_dev, qpn);
 		if (unlikely(!hr_qp)) {
 			dev_err(hr_dev->dev, "CQ %06lx with entry for unknown QPN %06x\n",
@@ -3053,6 +3042,7 @@ static int hns_roce_v2_poll_one(struct hns_roce_cq *hr_cq,
 		*cur_qp = hr_qp;
 	}
 
+	hr_qp = *cur_qp;
 	wc->qp = &(*cur_qp)->ibqp;
 	wc->vendor_err = 0;
 
@@ -3137,14 +3127,24 @@ static int hns_roce_v2_poll_one(struct hns_roce_cq *hr_cq,
 		break;
 	}
 
-	/* flush cqe if wc status is error, excluding flush error */
-	if ((wc->status != IB_WC_SUCCESS) &&
-	    (wc->status != IB_WC_WR_FLUSH_ERR)) {
-		attr_mask = IB_QP_STATE;
-		attr.qp_state = IB_QPS_ERR;
-		return hns_roce_v2_modify_qp(&(*cur_qp)->ibqp,
-					     &attr, attr_mask,
-					     (*cur_qp)->state, IB_QPS_ERR);
+	/*
+	 * Hip08 hardware cannot flush the WQEs in SQ/RQ if the QP state gets
+	 * into errored mode. Hence, as a workaround to this hardware
+	 * limitation, driver needs to assist in flushing. But the flushing
+	 * operation uses mailbox to convey the QP state to the hardware and
+	 * which can sleep due to the mutex protection around the mailbox calls.
+	 * Hence, use the deferred flush for now. Once wc error detected, the
+	 * flushing operation is needed.
+	 */
+	if (wc->status != IB_WC_SUCCESS &&
+	    wc->status != IB_WC_WR_FLUSH_ERR) {
+		dev_err(hr_dev->dev, "error cqe status is: 0x%x\n",
+			status & HNS_ROCE_V2_CQE_STATUS_MASK);
+
+		if (!test_and_set_bit(HNS_ROCE_FLUSH_FLAG, &hr_qp->flush_flag))
+			init_flush_work(hr_dev, hr_qp);
+
+		return 0;
 	}
 
 	if (wc->status == IB_WC_WR_FLUSH_ERR)
@@ -4735,6 +4735,8 @@ static int hns_roce_v2_modify_qp(struct ib_qp *ibqp,
 	struct hns_roce_v2_qp_context *context = ctx;
 	struct hns_roce_v2_qp_context *qpc_mask = ctx + 1;
 	struct device *dev = hr_dev->dev;
+	unsigned long sq_flag = 0;
+	unsigned long rq_flag = 0;
 	int ret;
 
 	/*
@@ -4752,6 +4754,9 @@ static int hns_roce_v2_modify_qp(struct ib_qp *ibqp,
 
 	/* When QP state is err, SQ and RQ WQE should be flushed */
 	if (new_state == IB_QPS_ERR) {
+		spin_lock_irqsave(&hr_qp->sq.lock, sq_flag);
+		spin_lock_irqsave(&hr_qp->rq.lock, rq_flag);
+		hr_qp->state = IB_QPS_ERR;
 		roce_set_field(context->byte_160_sq_ci_pi,
 			       V2_QPC_BYTE_160_SQ_PRODUCER_IDX_M,
 			       V2_QPC_BYTE_160_SQ_PRODUCER_IDX_S,
@@ -4769,6 +4774,8 @@ static int hns_roce_v2_modify_qp(struct ib_qp *ibqp,
 			       V2_QPC_BYTE_84_RQ_PRODUCER_IDX_M,
 			       V2_QPC_BYTE_84_RQ_PRODUCER_IDX_S, 0);
 		}
+		spin_unlock_irqrestore(&hr_qp->rq.lock, rq_flag);
+		spin_unlock_irqrestore(&hr_qp->sq.lock, sq_flag);
 	}
 
 	/* Configure the optional fields */
diff --git a/drivers/infiniband/hw/hns/hns_roce_qp.c b/drivers/infiniband/hw/hns/hns_roce_qp.c
index dab73140c5c29..f885b22fc0459 100644
--- a/drivers/infiniband/hw/hns/hns_roce_qp.c
+++ b/drivers/infiniband/hw/hns/hns_roce_qp.c
@@ -57,10 +57,12 @@ static void flush_work_handle(struct work_struct *work)
 	attr_mask = IB_QP_STATE;
 	attr.qp_state = IB_QPS_ERR;
 
-	ret = hns_roce_modify_qp(&hr_qp->ibqp, &attr, attr_mask, NULL);
-	if (ret)
-		dev_err(dev, "Modify QP to error state failed(%d) during CQE flush\n",
-			ret);
+	if (test_and_clear_bit(HNS_ROCE_FLUSH_FLAG, &hr_qp->flush_flag)) {
+		ret = hns_roce_modify_qp(&hr_qp->ibqp, &attr, attr_mask, NULL);
+		if (ret)
+			dev_err(dev, "Modify QP to error state failed(%d) during CQE flush\n",
+				ret);
+	}
 
 	/*
 	 * make sure we signal QP destroy leg that flush QP was completed
@@ -761,6 +763,7 @@ static int hns_roce_create_qp_common(struct hns_roce_dev *hr_dev,
 	spin_lock_init(&hr_qp->rq.lock);
 
 	hr_qp->state = IB_QPS_RESET;
+	hr_qp->flush_flag = 0;
 
 	hr_qp->ibqp.qp_type = init_attr->qp_type;
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 084/149] mt76: mt7603: fix input validation issues for powersave-filtered frames

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit d55aa5e17461b8b423adae376978032c4a10a1d8 ]

Before extracting the tid out of the packet, check if it was qos-data.
Only accept tid values 0-7
Also, avoid accepting the hardware queue as skb queue mapping, it could
lead to an overrun. Instead, derive the hardware queue from the tid number,
in order to avoid issues with packets being filtered multiple times.
This also fixes a mismatch between hardware and software queue indexes.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7603/dma.c   | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/dma.c b/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
index a6ab73060aada..57428467fe967 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/dma.c
@@ -30,6 +30,16 @@ mt7603_init_tx_queue(struct mt7603_dev *dev, struct mt76_sw_queue *q,
 static void
 mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
 {
+	static const u8 tid_to_ac[8] = {
+		IEEE80211_AC_BE,
+		IEEE80211_AC_BK,
+		IEEE80211_AC_BK,
+		IEEE80211_AC_BE,
+		IEEE80211_AC_VI,
+		IEEE80211_AC_VI,
+		IEEE80211_AC_VO,
+		IEEE80211_AC_VO
+	};
 	__le32 *txd = (__le32 *)skb->data;
 	struct ieee80211_hdr *hdr;
 	struct ieee80211_sta *sta;
@@ -38,7 +48,7 @@ mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
 	void *priv;
 	int idx;
 	u32 val;
-	u8 tid;
+	u8 tid = 0;
 
 	if (skb->len < MT_TXD_SIZE + sizeof(struct ieee80211_hdr))
 		goto free;
@@ -56,15 +66,16 @@ mt7603_rx_loopback_skb(struct mt7603_dev *dev, struct sk_buff *skb)
 
 	priv = msta = container_of(wcid, struct mt7603_sta, wcid);
 	val = le32_to_cpu(txd[0]);
-	skb_set_queue_mapping(skb, FIELD_GET(MT_TXD0_Q_IDX, val));
-
 	val &= ~(MT_TXD0_P_IDX | MT_TXD0_Q_IDX);
 	val |= FIELD_PREP(MT_TXD0_Q_IDX, MT_TX_HW_QUEUE_MGMT);
 	txd[0] = cpu_to_le32(val);
 
 	sta = container_of(priv, struct ieee80211_sta, drv_priv);
 	hdr = (struct ieee80211_hdr *)&skb->data[MT_TXD_SIZE];
-	tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
+	if (ieee80211_is_data_qos(hdr->frame_control))
+		tid = *ieee80211_get_qos_ctl(hdr) &
+		      IEEE80211_QOS_CTL_TAG1D_MASK;
+	skb_set_queue_mapping(skb, tid_to_ac[tid]);
 	ieee80211_sta_set_buffered(sta, tid, true);
 
 	spin_lock_bh(&dev->ps_lock);
-- 
2.20.1

[PATCH AUTOSEL 5.6 085/149] Bluetooth: hci_qca: Bug fixes while collecting controller memory dump

[Sasha Levin]

From: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>

[ Upstream commit 7c2c3e63e1e97cf8547c5818544312fb916dd0b9 ]

This patch will fix the below issues
 1. Discarding memory dump events if memdump state is moved to
    MEMDUMP_TIMEOUT.
 2. Fixed race conditions between qca_hw_error() and qca_controller_memdump
    while free memory dump buffers using mutex lock
 3. Moved timeout timer to delayed work queue
 4. Injecting HW error event in a case when dumps failed to receive and HW
    error event is not yet received.
 5. Clearing hw error and command timeout function callbacks before
    sending pre shutdown command.

 Collecting memory dump will follow any of the below sequence.

 Sequence 1:
   Receiving Memory dump events from the controller
   Received entire dump in stipulated time
   Received HW error event from the controller
   Controller Reset from HOST

 Sequence 2:
   Receiving Memory dump events from the controller
   Failed to Receive entire dump in stipulated time
   A Timeout schedules and if no HW error event received a fake HW
     error event will be injected.
   Controller Reset from HOST.

 Sequence 3:
   Received HW error event
   HOST trigger SSR by sending crash packet to controller.
   Received entire dump in stipulated time
   Controller Reset from HOST

Fixes: d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Reported-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_qca.c | 101 ++++++++++++++++++++++++------------
 1 file changed, 67 insertions(+), 34 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 7e5a097bd0ed8..6905166860e5b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -29,6 +29,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/serdev.h>
+#include <linux/mutex.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -69,7 +70,8 @@ enum qca_flags {
 	QCA_IBS_ENABLED,
 	QCA_DROP_VENDOR_EVENT,
 	QCA_SUSPENDING,
-	QCA_MEMDUMP_COLLECTION
+	QCA_MEMDUMP_COLLECTION,
+	QCA_HW_ERROR_EVENT
 };
 
 
@@ -138,18 +140,19 @@ struct qca_data {
 	u32 tx_idle_delay;
 	struct timer_list wake_retrans_timer;
 	u32 wake_retrans;
-	struct timer_list memdump_timer;
 	struct workqueue_struct *workqueue;
 	struct work_struct ws_awake_rx;
 	struct work_struct ws_awake_device;
 	struct work_struct ws_rx_vote_off;
 	struct work_struct ws_tx_vote_off;
 	struct work_struct ctrl_memdump_evt;
+	struct delayed_work ctrl_memdump_timeout;
 	struct qca_memdump_data *qca_memdump;
 	unsigned long flags;
 	struct completion drop_ev_comp;
 	wait_queue_head_t suspend_wait_q;
 	enum qca_memdump_states memdump_state;
+	struct mutex hci_memdump_lock;
 
 	/* For debugging purpose */
 	u64 ibs_sent_wacks;
@@ -522,23 +525,28 @@ static void hci_ibs_wake_retrans_timeout(struct timer_list *t)
 		hci_uart_tx_wakeup(hu);
 }
 
-static void hci_memdump_timeout(struct timer_list *t)
+
+static void qca_controller_memdump_timeout(struct work_struct *work)
 {
-	struct qca_data *qca = from_timer(qca, t, tx_idle_timer);
+	struct qca_data *qca = container_of(work, struct qca_data,
+					ctrl_memdump_timeout.work);
 	struct hci_uart *hu = qca->hu;
-	struct qca_memdump_data *qca_memdump = qca->qca_memdump;
-	char *memdump_buf = qca_memdump->memdump_buf_tail;
-
-	bt_dev_err(hu->hdev, "clearing allocated memory due to memdump timeout");
-	/* Inject hw error event to reset the device and driver. */
-	hci_reset_dev(hu->hdev);
-	vfree(memdump_buf);
-	kfree(qca_memdump);
-	qca->memdump_state = QCA_MEMDUMP_TIMEOUT;
-	del_timer(&qca->memdump_timer);
-	cancel_work_sync(&qca->ctrl_memdump_evt);
+
+	mutex_lock(&qca->hci_memdump_lock);
+	if (test_bit(QCA_MEMDUMP_COLLECTION, &qca->flags)) {
+		qca->memdump_state = QCA_MEMDUMP_TIMEOUT;
+		if (!test_bit(QCA_HW_ERROR_EVENT, &qca->flags)) {
+			/* Inject hw error event to reset the device
+			 * and driver.
+			 */
+			hci_reset_dev(hu->hdev);
+		}
+	}
+
+	mutex_unlock(&qca->hci_memdump_lock);
 }
 
+
 /* Initialize protocol */
 static int qca_open(struct hci_uart *hu)
 {
@@ -558,6 +566,7 @@ static int qca_open(struct hci_uart *hu)
 	skb_queue_head_init(&qca->tx_wait_q);
 	skb_queue_head_init(&qca->rx_memdump_q);
 	spin_lock_init(&qca->hci_ibs_lock);
+	mutex_init(&qca->hci_memdump_lock);
 	qca->workqueue = alloc_ordered_workqueue("qca_wq", 0);
 	if (!qca->workqueue) {
 		BT_ERR("QCA Workqueue not initialized properly");
@@ -570,6 +579,8 @@ static int qca_open(struct hci_uart *hu)
 	INIT_WORK(&qca->ws_rx_vote_off, qca_wq_serial_rx_clock_vote_off);
 	INIT_WORK(&qca->ws_tx_vote_off, qca_wq_serial_tx_clock_vote_off);
 	INIT_WORK(&qca->ctrl_memdump_evt, qca_controller_memdump);
+	INIT_DELAYED_WORK(&qca->ctrl_memdump_timeout,
+			  qca_controller_memdump_timeout);
 	init_waitqueue_head(&qca->suspend_wait_q);
 
 	qca->hu = hu;
@@ -596,7 +607,6 @@ static int qca_open(struct hci_uart *hu)
 
 	timer_setup(&qca->tx_idle_timer, hci_ibs_tx_idle_timeout, 0);
 	qca->tx_idle_delay = IBS_HOST_TX_IDLE_TIMEOUT_MS;
-	timer_setup(&qca->memdump_timer, hci_memdump_timeout, 0);
 
 	BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
 	       qca->tx_idle_delay, qca->wake_retrans);
@@ -677,7 +687,6 @@ static int qca_close(struct hci_uart *hu)
 	skb_queue_purge(&qca->rx_memdump_q);
 	del_timer(&qca->tx_idle_timer);
 	del_timer(&qca->wake_retrans_timer);
-	del_timer(&qca->memdump_timer);
 	destroy_workqueue(qca->workqueue);
 	qca->hu = NULL;
 
@@ -963,11 +972,20 @@ static void qca_controller_memdump(struct work_struct *work)
 
 	while ((skb = skb_dequeue(&qca->rx_memdump_q))) {
 
+		mutex_lock(&qca->hci_memdump_lock);
+		/* Skip processing the received packets if timeout detected. */
+		if (qca->memdump_state == QCA_MEMDUMP_TIMEOUT) {
+			mutex_unlock(&qca->hci_memdump_lock);
+			return;
+		}
+
 		if (!qca_memdump) {
 			qca_memdump = kzalloc(sizeof(struct qca_memdump_data),
 					      GFP_ATOMIC);
-			if (!qca_memdump)
+			if (!qca_memdump) {
+				mutex_unlock(&qca->hci_memdump_lock);
 				return;
+			}
 
 			qca->qca_memdump = qca_memdump;
 		}
@@ -992,13 +1010,15 @@ static void qca_controller_memdump(struct work_struct *work)
 			if (!(dump_size)) {
 				bt_dev_err(hu->hdev, "Rx invalid memdump size");
 				kfree_skb(skb);
+				mutex_unlock(&qca->hci_memdump_lock);
 				return;
 			}
 
 			bt_dev_info(hu->hdev, "QCA collecting dump of size:%u",
 				    dump_size);
-			mod_timer(&qca->memdump_timer, (jiffies +
-				  msecs_to_jiffies(MEMDUMP_TIMEOUT_MS)));
+			queue_delayed_work(qca->workqueue,
+					   &qca->ctrl_memdump_timeout,
+					msecs_to_jiffies(MEMDUMP_TIMEOUT_MS));
 
 			skb_pull(skb, sizeof(dump_size));
 			memdump_buf = vmalloc(dump_size);
@@ -1016,6 +1036,7 @@ static void qca_controller_memdump(struct work_struct *work)
 			kfree(qca_memdump);
 			kfree_skb(skb);
 			qca->qca_memdump = NULL;
+			mutex_unlock(&qca->hci_memdump_lock);
 			return;
 		}
 
@@ -1046,16 +1067,20 @@ static void qca_controller_memdump(struct work_struct *work)
 			memdump_buf = qca_memdump->memdump_buf_head;
 			dev_coredumpv(&hu->serdev->dev, memdump_buf,
 				      qca_memdump->received_dump, GFP_KERNEL);
-			del_timer(&qca->memdump_timer);
+			cancel_delayed_work(&qca->ctrl_memdump_timeout);
 			kfree(qca->qca_memdump);
 			qca->qca_memdump = NULL;
 			qca->memdump_state = QCA_MEMDUMP_COLLECTED;
+			clear_bit(QCA_MEMDUMP_COLLECTION, &qca->flags);
 		}
+
+		mutex_unlock(&qca->hci_memdump_lock);
 	}
 
 }
 
-int qca_controller_memdump_event(struct hci_dev *hdev, struct sk_buff *skb)
+static int qca_controller_memdump_event(struct hci_dev *hdev,
+					struct sk_buff *skb)
 {
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	struct qca_data *qca = hu->priv;
@@ -1406,30 +1431,21 @@ static void qca_wait_for_dump_collection(struct hci_dev *hdev)
 {
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	struct qca_data *qca = hu->priv;
-	struct qca_memdump_data *qca_memdump = qca->qca_memdump;
-	char *memdump_buf = NULL;
 
 	wait_on_bit_timeout(&qca->flags, QCA_MEMDUMP_COLLECTION,
 			    TASK_UNINTERRUPTIBLE, MEMDUMP_TIMEOUT_MS);
 
 	clear_bit(QCA_MEMDUMP_COLLECTION, &qca->flags);
-	if (qca->memdump_state == QCA_MEMDUMP_IDLE) {
-		bt_dev_err(hu->hdev, "Clearing the buffers due to timeout");
-		if (qca_memdump)
-			memdump_buf = qca_memdump->memdump_buf_tail;
-		vfree(memdump_buf);
-		kfree(qca_memdump);
-		qca->memdump_state = QCA_MEMDUMP_TIMEOUT;
-		del_timer(&qca->memdump_timer);
-		cancel_work_sync(&qca->ctrl_memdump_evt);
-	}
 }
 
 static void qca_hw_error(struct hci_dev *hdev, u8 code)
 {
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 	struct qca_data *qca = hu->priv;
+	struct qca_memdump_data *qca_memdump = qca->qca_memdump;
+	char *memdump_buf = NULL;
 
+	set_bit(QCA_HW_ERROR_EVENT, &qca->flags);
 	bt_dev_info(hdev, "mem_dump_status: %d", qca->memdump_state);
 
 	if (qca->memdump_state == QCA_MEMDUMP_IDLE) {
@@ -1449,6 +1465,23 @@ static void qca_hw_error(struct hci_dev *hdev, u8 code)
 		bt_dev_info(hdev, "waiting for dump to complete");
 		qca_wait_for_dump_collection(hdev);
 	}
+
+	if (qca->memdump_state != QCA_MEMDUMP_COLLECTED) {
+		bt_dev_err(hu->hdev, "clearing allocated memory due to memdump timeout");
+		mutex_lock(&qca->hci_memdump_lock);
+		if (qca_memdump)
+			memdump_buf = qca_memdump->memdump_buf_head;
+		vfree(memdump_buf);
+		kfree(qca_memdump);
+		qca->qca_memdump = NULL;
+		qca->memdump_state = QCA_MEMDUMP_TIMEOUT;
+		cancel_delayed_work(&qca->ctrl_memdump_timeout);
+		skb_queue_purge(&qca->rx_memdump_q);
+		mutex_unlock(&qca->hci_memdump_lock);
+		cancel_work_sync(&qca->ctrl_memdump_evt);
+	}
+
+	clear_bit(QCA_HW_ERROR_EVENT, &qca->flags);
 }
 
 static void qca_cmd_timeout(struct hci_dev *hdev)
-- 
2.20.1

[PATCH AUTOSEL 5.6 086/149] ASoC: soc-pcm: fix regression in soc_new_pcm()

[Sasha Levin]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit a4877a6fb2bd2e356a5eaacd86d6b6d69ff84e69 ]

Commit af4bac11531f ("ASoC: soc-pcm: crash in snd_soc_dapm_new_dai")
swapped the SNDRV_PCM_STREAM_* parameter in the
snd_soc_dai_stream_valid(cpu_dai, ...) checks. But that works only
for codec2codec links. For normal links it breaks registration of
playback/capture-only PCM devices.

E.g. on qcom/apq8016_sbc there is usually one playback-only and one
capture-only PCM device, but they disappeared after the commit.

The codec2codec case was added in commit a342031cdd08
("ASoC: create pcm for codec2codec links as well") as an extra check
(e.g. `playback = playback && cpu_playback->channels_min`).

We should be able to simplify the code by checking directly for
the correct stream type in the loop.
This also fixes the regression because we check for PLAYBACK for
both codec and cpu dai again when codec2codec is not used.

Fixes: af4bac11531f ("ASoC: soc-pcm: crash in snd_soc_dapm_new_dai")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20200218103824.26708-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-pcm.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 2c59b3688ca01..a08ebbf5a37f3 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -2888,22 +2888,19 @@ int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
 		capture = rtd->dai_link->dpcm_capture;
 	} else {
 		/* Adapt stream for codec2codec links */
-		struct snd_soc_pcm_stream *cpu_capture = rtd->dai_link->params ?
-			&cpu_dai->driver->playback : &cpu_dai->driver->capture;
-		struct snd_soc_pcm_stream *cpu_playback = rtd->dai_link->params ?
-			&cpu_dai->driver->capture : &cpu_dai->driver->playback;
+		int cpu_capture = rtd->dai_link->params ?
+			SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
+		int cpu_playback = rtd->dai_link->params ?
+			SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
 
 		for_each_rtd_codec_dai(rtd, i, codec_dai) {
 			if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) &&
-			    snd_soc_dai_stream_valid(cpu_dai,   SNDRV_PCM_STREAM_CAPTURE))
+			    snd_soc_dai_stream_valid(cpu_dai,   cpu_playback))
 				playback = 1;
 			if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) &&
-			    snd_soc_dai_stream_valid(cpu_dai,   SNDRV_PCM_STREAM_PLAYBACK))
+			    snd_soc_dai_stream_valid(cpu_dai,   cpu_capture))
 				capture = 1;
 		}
-
-		capture = capture && cpu_capture->channels_min;
-		playback = playback && cpu_playback->channels_min;
 	}
 
 	if (rtd->dai_link->playback_only) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 087/149] drm/amd/display: dal_ddc_i2c_payloads_create can fail causing panic

[Sasha Levin]

From: Aric Cyr <aric.cyr@amd.com>

[ Upstream commit 6a6c4a4d459ecacc9013c45dcbf2bc9747fdbdbd ]

[Why]
Since the i2c payload allocation can fail need to check return codes

[How]
Clean up i2c payload allocations and check for errors

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/core/dc_link_ddc.c | 52 +++++++++----------
 1 file changed, 25 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
index a49c10d5df26b..2d0524f677c7c 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
@@ -126,22 +126,16 @@ struct aux_payloads {
 	struct vector payloads;
 };
 
-static struct i2c_payloads *dal_ddc_i2c_payloads_create(struct dc_context *ctx, uint32_t count)
+static bool dal_ddc_i2c_payloads_create(
+		struct dc_context *ctx,
+		struct i2c_payloads *payloads,
+		uint32_t count)
 {
-	struct i2c_payloads *payloads;
-
-	payloads = kzalloc(sizeof(struct i2c_payloads), GFP_KERNEL);
-
-	if (!payloads)
-		return NULL;
-
 	if (dal_vector_construct(
 		&payloads->payloads, ctx, count, sizeof(struct i2c_payload)))
-		return payloads;
-
-	kfree(payloads);
-	return NULL;
+		return true;
 
+	return false;
 }
 
 static struct i2c_payload *dal_ddc_i2c_payloads_get(struct i2c_payloads *p)
@@ -154,14 +148,12 @@ static uint32_t dal_ddc_i2c_payloads_get_count(struct i2c_payloads *p)
 	return p->payloads.count;
 }
 
-static void dal_ddc_i2c_payloads_destroy(struct i2c_payloads **p)
+static void dal_ddc_i2c_payloads_destroy(struct i2c_payloads *p)
 {
-	if (!p || !*p)
+	if (!p)
 		return;
-	dal_vector_destruct(&(*p)->payloads);
-	kfree(*p);
-	*p = NULL;
 
+	dal_vector_destruct(&p->payloads);
 }
 
 #define DDC_MIN(a, b) (((a) < (b)) ? (a) : (b))
@@ -524,9 +516,13 @@ bool dal_ddc_service_query_ddc_data(
 
 	uint32_t payloads_num = write_payloads + read_payloads;
 
+
 	if (write_size > EDID_SEGMENT_SIZE || read_size > EDID_SEGMENT_SIZE)
 		return false;
 
+	if (!payloads_num)
+		return false;
+
 	/*TODO: len of payload data for i2c and aux is uint8!!!!,
 	 *  but we want to read 256 over i2c!!!!*/
 	if (dal_ddc_service_is_in_aux_transaction_mode(ddc)) {
@@ -557,23 +553,25 @@ bool dal_ddc_service_query_ddc_data(
 			ret = dal_ddc_submit_aux_command(ddc, &payload);
 		}
 	} else {
-		struct i2c_payloads *payloads =
-			dal_ddc_i2c_payloads_create(ddc->ctx, payloads_num);
+		struct i2c_command command = {0};
+		struct i2c_payloads payloads;
+
+		if (!dal_ddc_i2c_payloads_create(ddc->ctx, &payloads, payloads_num))
+			return false;
 
-		struct i2c_command command = {
-			.payloads = dal_ddc_i2c_payloads_get(payloads),
-			.number_of_payloads = 0,
-			.engine = DDC_I2C_COMMAND_ENGINE,
-			.speed = ddc->ctx->dc->caps.i2c_speed_in_khz };
+		command.payloads = dal_ddc_i2c_payloads_get(&payloads);
+		command.number_of_payloads = 0;
+		command.engine = DDC_I2C_COMMAND_ENGINE;
+		command.speed = ddc->ctx->dc->caps.i2c_speed_in_khz;
 
 		dal_ddc_i2c_payloads_add(
-			payloads, address, write_size, write_buf, true);
+			&payloads, address, write_size, write_buf, true);
 
 		dal_ddc_i2c_payloads_add(
-			payloads, address, read_size, read_buf, false);
+			&payloads, address, read_size, read_buf, false);
 
 		command.number_of_payloads =
-			dal_ddc_i2c_payloads_get_count(payloads);
+			dal_ddc_i2c_payloads_get_count(&payloads);
 
 		ret = dm_helpers_submit_i2c(
 				ddc->ctx,
-- 
2.20.1

[PATCH AUTOSEL 5.6 088/149] drm/amd/display: System crashes when add_ptb_to_table() gets called

[Sasha Levin]

From: Peikang Zhang <peikang.zhang@amd.com>

[ Upstream commit 0062972b9d9f888d0273c6496769d02e8f509135 ]

[Why]
Unused VMIDs were not evicted correctly

[How]
1. evict_vmids() logic was fixed;
2. Added boundary check for add_ptb_to_table() and
   clear_entry_from_vmid_table() to avoid crash caused by array out of
   boundary;
3. For mod_vmid_get_for_ptb(), vimd is changed from unsigned to signed
   due to vimd is signed.

Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/modules/vmid/vmid.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/modules/vmid/vmid.c b/drivers/gpu/drm/amd/display/modules/vmid/vmid.c
index f0a153704f6e0..00f132f8ad55d 100644
--- a/drivers/gpu/drm/amd/display/modules/vmid/vmid.c
+++ b/drivers/gpu/drm/amd/display/modules/vmid/vmid.c
@@ -40,14 +40,18 @@ struct core_vmid {
 
 static void add_ptb_to_table(struct core_vmid *core_vmid, unsigned int vmid, uint64_t ptb)
 {
-	core_vmid->ptb_assigned_to_vmid[vmid] = ptb;
-	core_vmid->num_vmids_available--;
+	if (vmid < MAX_VMID) {
+		core_vmid->ptb_assigned_to_vmid[vmid] = ptb;
+		core_vmid->num_vmids_available--;
+	}
 }
 
 static void clear_entry_from_vmid_table(struct core_vmid *core_vmid, unsigned int vmid)
 {
-	core_vmid->ptb_assigned_to_vmid[vmid] = 0;
-	core_vmid->num_vmids_available++;
+	if (vmid < MAX_VMID) {
+		core_vmid->ptb_assigned_to_vmid[vmid] = 0;
+		core_vmid->num_vmids_available++;
+	}
 }
 
 static void evict_vmids(struct core_vmid *core_vmid)
@@ -57,7 +61,7 @@ static void evict_vmids(struct core_vmid *core_vmid)
 
 	// At this point any positions with value 0 are unused vmids, evict them
 	for (i = 1; i < core_vmid->num_vmid; i++) {
-		if (ord & (1u << i))
+		if (!(ord & (1u << i)))
 			clear_entry_from_vmid_table(core_vmid, i);
 	}
 }
@@ -91,7 +95,7 @@ static int get_next_available_vmid(struct core_vmid *core_vmid)
 uint8_t mod_vmid_get_for_ptb(struct mod_vmid *mod_vmid, uint64_t ptb)
 {
 	struct core_vmid *core_vmid = MOD_VMID_TO_CORE(mod_vmid);
-	unsigned int vmid = 0;
+	int vmid = 0;
 
 	// Physical address gets vmid 0
 	if (ptb == 0)
-- 
2.20.1

[PATCH AUTOSEL 5.6 089/149] drm/omap: dss: Cleanup DSS ports on initialisation failure

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit 2a0a3ae17d36fa86dcf7c8e8d7b7f056ebd6c064 ]

When the DSS initialises its output DPI and SDI ports, failures don't
clean up previous successfully initialised ports. This can lead to
resource leak or memory corruption. Fix it.

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-22-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/omapdrm/dss/dss.c | 43 +++++++++++++++++++------------
 1 file changed, 26 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dss.c b/drivers/gpu/drm/omapdrm/dss/dss.c
index 225ec808b01a9..67b92b5d8dd76 100644
--- a/drivers/gpu/drm/omapdrm/dss/dss.c
+++ b/drivers/gpu/drm/omapdrm/dss/dss.c
@@ -1151,46 +1151,38 @@ static const struct dss_features dra7xx_dss_feats = {
 	.has_lcd_clk_src	=	true,
 };
 
-static int dss_init_ports(struct dss_device *dss)
+static void __dss_uninit_ports(struct dss_device *dss, unsigned int num_ports)
 {
 	struct platform_device *pdev = dss->pdev;
 	struct device_node *parent = pdev->dev.of_node;
 	struct device_node *port;
 	unsigned int i;
-	int r;
 
-	for (i = 0; i < dss->feat->num_ports; i++) {
+	for (i = 0; i < num_ports; i++) {
 		port = of_graph_get_port_by_id(parent, i);
 		if (!port)
 			continue;
 
 		switch (dss->feat->ports[i]) {
 		case OMAP_DISPLAY_TYPE_DPI:
-			r = dpi_init_port(dss, pdev, port, dss->feat->model);
-			if (r)
-				return r;
+			dpi_uninit_port(port);
 			break;
-
 		case OMAP_DISPLAY_TYPE_SDI:
-			r = sdi_init_port(dss, pdev, port);
-			if (r)
-				return r;
+			sdi_uninit_port(port);
 			break;
-
 		default:
 			break;
 		}
 	}
-
-	return 0;
 }
 
-static void dss_uninit_ports(struct dss_device *dss)
+static int dss_init_ports(struct dss_device *dss)
 {
 	struct platform_device *pdev = dss->pdev;
 	struct device_node *parent = pdev->dev.of_node;
 	struct device_node *port;
-	int i;
+	unsigned int i;
+	int r;
 
 	for (i = 0; i < dss->feat->num_ports; i++) {
 		port = of_graph_get_port_by_id(parent, i);
@@ -1199,15 +1191,32 @@ static void dss_uninit_ports(struct dss_device *dss)
 
 		switch (dss->feat->ports[i]) {
 		case OMAP_DISPLAY_TYPE_DPI:
-			dpi_uninit_port(port);
+			r = dpi_init_port(dss, pdev, port, dss->feat->model);
+			if (r)
+				goto error;
 			break;
+
 		case OMAP_DISPLAY_TYPE_SDI:
-			sdi_uninit_port(port);
+			r = sdi_init_port(dss, pdev, port);
+			if (r)
+				goto error;
 			break;
+
 		default:
 			break;
 		}
 	}
+
+	return 0;
+
+error:
+	__dss_uninit_ports(dss, i);
+	return r;
+}
+
+static void dss_uninit_ports(struct dss_device *dss)
+{
+	__dss_uninit_ports(dss, dss->feat->num_ports);
 }
 
 static int dss_video_pll_probe(struct dss_device *dss)
-- 
2.20.1

[PATCH AUTOSEL 5.6 090/149] drm/amdkfd: Fix a memory leak in queue creation error handling

[Sasha Levin]

From: Yong Zhao <Yong.Zhao@amd.com>

[ Upstream commit 66f28b9a169855367d6e3ef71001969a8bffb19b ]

When the queue creation failed, some resources were not freed. Fix it.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
index 31fcd1b51f00f..4f7927b661ff4 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
@@ -328,6 +328,9 @@ int pqm_create_queue(struct process_queue_manager *pqm,
 	return retval;
 
 err_create_queue:
+	uninit_queue(q);
+	if (kq)
+		kernel_queue_uninit(kq, false);
 	kfree(pqn);
 err_allocate_pqn:
 	/* check if queues list is empty unregister process from device */
-- 
2.20.1

[PATCH AUTOSEL 5.6 091/149] RDMA/ucma: Put a lock around every call to the rdma_cm layer

[Sasha Levin]

From: Jason Gunthorpe <jgg@mellanox.com>

[ Upstream commit 7c11910783a1ea17e88777552ef146cace607b3c ]

The rdma_cm must be used single threaded.

This appears to be a bug in the design, as it does have lots of locking
that seems like it should allow concurrency. However, when it is all said
and done every single place that uses the cma_exch() scheme is broken, and
all the unlocked reads from the ucma of the cm_id data are wrong too.

syzkaller has been finding endless bugs related to this.

Fixing this in any elegant way is some enormous amount of work. Take a
very big hammer and put a mutex around everything to do with the
ucma_context at the top of every syscall.

Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace")
Link: https://lore.kernel.org/r/20200218210432.GA31966@ziepe.ca
Reported-by: syzbot+adb15cf8c2798e4e0db4@syzkaller.appspotmail.com
Reported-by: syzbot+e5579222b6a3edd96522@syzkaller.appspotmail.com
Reported-by: syzbot+4b628fcc748474003457@syzkaller.appspotmail.com
Reported-by: syzbot+29ee8f76017ce6cf03da@syzkaller.appspotmail.com
Reported-by: syzbot+6956235342b7317ec564@syzkaller.appspotmail.com
Reported-by: syzbot+b358909d8d01556b790b@syzkaller.appspotmail.com
Reported-by: syzbot+6b46b135602a3f3ac99e@syzkaller.appspotmail.com
Reported-by: syzbot+8458d13b13562abf6b77@syzkaller.appspotmail.com
Reported-by: syzbot+bd034f3fdc0402e942ed@syzkaller.appspotmail.com
Reported-by: syzbot+c92378b32760a4eef756@syzkaller.appspotmail.com
Reported-by: syzbot+68b44a1597636e0b342c@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/ucma.c | 49 ++++++++++++++++++++++++++++++++--
 1 file changed, 47 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index 0274e9b704be5..f4f79f1292b91 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -91,6 +91,7 @@ struct ucma_context {
 
 	struct ucma_file	*file;
 	struct rdma_cm_id	*cm_id;
+	struct mutex		mutex;
 	u64			uid;
 
 	struct list_head	list;
@@ -216,6 +217,7 @@ static struct ucma_context *ucma_alloc_ctx(struct ucma_file *file)
 	init_completion(&ctx->comp);
 	INIT_LIST_HEAD(&ctx->mc_list);
 	ctx->file = file;
+	mutex_init(&ctx->mutex);
 
 	if (xa_alloc(&ctx_table, &ctx->id, ctx, xa_limit_32b, GFP_KERNEL))
 		goto error;
@@ -589,6 +591,7 @@ static int ucma_free_ctx(struct ucma_context *ctx)
 	}
 
 	events_reported = ctx->events_reported;
+	mutex_destroy(&ctx->mutex);
 	kfree(ctx);
 	return events_reported;
 }
@@ -658,7 +661,10 @@ static ssize_t ucma_bind_ip(struct ucma_file *file, const char __user *inbuf,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
+	mutex_lock(&ctx->mutex);
 	ret = rdma_bind_addr(ctx->cm_id, (struct sockaddr *) &cmd.addr);
+	mutex_unlock(&ctx->mutex);
+
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -681,7 +687,9 @@ static ssize_t ucma_bind(struct ucma_file *file, const char __user *inbuf,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
+	mutex_lock(&ctx->mutex);
 	ret = rdma_bind_addr(ctx->cm_id, (struct sockaddr *) &cmd.addr);
+	mutex_unlock(&ctx->mutex);
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -705,8 +713,10 @@ static ssize_t ucma_resolve_ip(struct ucma_file *file,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
+	mutex_lock(&ctx->mutex);
 	ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr,
 				(struct sockaddr *) &cmd.dst_addr, cmd.timeout_ms);
+	mutex_unlock(&ctx->mutex);
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -731,8 +741,10 @@ static ssize_t ucma_resolve_addr(struct ucma_file *file,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
+	mutex_lock(&ctx->mutex);
 	ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr,
 				(struct sockaddr *) &cmd.dst_addr, cmd.timeout_ms);
+	mutex_unlock(&ctx->mutex);
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -752,7 +764,9 @@ static ssize_t ucma_resolve_route(struct ucma_file *file,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
+	mutex_lock(&ctx->mutex);
 	ret = rdma_resolve_route(ctx->cm_id, cmd.timeout_ms);
+	mutex_unlock(&ctx->mutex);
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -841,6 +855,7 @@ static ssize_t ucma_query_route(struct ucma_file *file,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
+	mutex_lock(&ctx->mutex);
 	memset(&resp, 0, sizeof resp);
 	addr = (struct sockaddr *) &ctx->cm_id->route.addr.src_addr;
 	memcpy(&resp.src_addr, addr, addr->sa_family == AF_INET ?
@@ -864,6 +879,7 @@ static ssize_t ucma_query_route(struct ucma_file *file,
 		ucma_copy_iw_route(&resp, &ctx->cm_id->route);
 
 out:
+	mutex_unlock(&ctx->mutex);
 	if (copy_to_user(u64_to_user_ptr(cmd.response),
 			 &resp, sizeof(resp)))
 		ret = -EFAULT;
@@ -1014,6 +1030,7 @@ static ssize_t ucma_query(struct ucma_file *file,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
+	mutex_lock(&ctx->mutex);
 	switch (cmd.option) {
 	case RDMA_USER_CM_QUERY_ADDR:
 		ret = ucma_query_addr(ctx, response, out_len);
@@ -1028,6 +1045,7 @@ static ssize_t ucma_query(struct ucma_file *file,
 		ret = -ENOSYS;
 		break;
 	}
+	mutex_unlock(&ctx->mutex);
 
 	ucma_put_ctx(ctx);
 	return ret;
@@ -1068,7 +1086,9 @@ static ssize_t ucma_connect(struct ucma_file *file, const char __user *inbuf,
 		return PTR_ERR(ctx);
 
 	ucma_copy_conn_param(ctx->cm_id, &conn_param, &cmd.conn_param);
+	mutex_lock(&ctx->mutex);
 	ret = rdma_connect(ctx->cm_id, &conn_param);
+	mutex_unlock(&ctx->mutex);
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -1089,7 +1109,9 @@ static ssize_t ucma_listen(struct ucma_file *file, const char __user *inbuf,
 
 	ctx->backlog = cmd.backlog > 0 && cmd.backlog < max_backlog ?
 		       cmd.backlog : max_backlog;
+	mutex_lock(&ctx->mutex);
 	ret = rdma_listen(ctx->cm_id, ctx->backlog);
+	mutex_unlock(&ctx->mutex);
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -1112,13 +1134,17 @@ static ssize_t ucma_accept(struct ucma_file *file, const char __user *inbuf,
 	if (cmd.conn_param.valid) {
 		ucma_copy_conn_param(ctx->cm_id, &conn_param, &cmd.conn_param);
 		mutex_lock(&file->mut);
+		mutex_lock(&ctx->mutex);
 		ret = __rdma_accept(ctx->cm_id, &conn_param, NULL);
+		mutex_unlock(&ctx->mutex);
 		if (!ret)
 			ctx->uid = cmd.uid;
 		mutex_unlock(&file->mut);
-	} else
+	} else {
+		mutex_lock(&ctx->mutex);
 		ret = __rdma_accept(ctx->cm_id, NULL, NULL);
-
+		mutex_unlock(&ctx->mutex);
+	}
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -1137,7 +1163,9 @@ static ssize_t ucma_reject(struct ucma_file *file, const char __user *inbuf,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
+	mutex_lock(&ctx->mutex);
 	ret = rdma_reject(ctx->cm_id, cmd.private_data, cmd.private_data_len);
+	mutex_unlock(&ctx->mutex);
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -1156,7 +1184,9 @@ static ssize_t ucma_disconnect(struct ucma_file *file, const char __user *inbuf,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
+	mutex_lock(&ctx->mutex);
 	ret = rdma_disconnect(ctx->cm_id);
+	mutex_unlock(&ctx->mutex);
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -1187,7 +1217,9 @@ static ssize_t ucma_init_qp_attr(struct ucma_file *file,
 	resp.qp_attr_mask = 0;
 	memset(&qp_attr, 0, sizeof qp_attr);
 	qp_attr.qp_state = cmd.qp_state;
+	mutex_lock(&ctx->mutex);
 	ret = rdma_init_qp_attr(ctx->cm_id, &qp_attr, &resp.qp_attr_mask);
+	mutex_unlock(&ctx->mutex);
 	if (ret)
 		goto out;
 
@@ -1273,9 +1305,13 @@ static int ucma_set_ib_path(struct ucma_context *ctx,
 		struct sa_path_rec opa;
 
 		sa_convert_path_ib_to_opa(&opa, &sa_path);
+		mutex_lock(&ctx->mutex);
 		ret = rdma_set_ib_path(ctx->cm_id, &opa);
+		mutex_unlock(&ctx->mutex);
 	} else {
+		mutex_lock(&ctx->mutex);
 		ret = rdma_set_ib_path(ctx->cm_id, &sa_path);
+		mutex_unlock(&ctx->mutex);
 	}
 	if (ret)
 		return ret;
@@ -1308,7 +1344,9 @@ static int ucma_set_option_level(struct ucma_context *ctx, int level,
 
 	switch (level) {
 	case RDMA_OPTION_ID:
+		mutex_lock(&ctx->mutex);
 		ret = ucma_set_option_id(ctx, optname, optval, optlen);
+		mutex_unlock(&ctx->mutex);
 		break;
 	case RDMA_OPTION_IB:
 		ret = ucma_set_option_ib(ctx, optname, optval, optlen);
@@ -1368,8 +1406,10 @@ static ssize_t ucma_notify(struct ucma_file *file, const char __user *inbuf,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
+	mutex_lock(&ctx->mutex);
 	if (ctx->cm_id->device)
 		ret = rdma_notify(ctx->cm_id, (enum ib_event_type)cmd.event);
+	mutex_unlock(&ctx->mutex);
 
 	ucma_put_ctx(ctx);
 	return ret;
@@ -1412,8 +1452,10 @@ static ssize_t ucma_process_join(struct ucma_file *file,
 	mc->join_state = join_state;
 	mc->uid = cmd->uid;
 	memcpy(&mc->addr, addr, cmd->addr_size);
+	mutex_lock(&ctx->mutex);
 	ret = rdma_join_multicast(ctx->cm_id, (struct sockaddr *)&mc->addr,
 				  join_state, mc);
+	mutex_unlock(&ctx->mutex);
 	if (ret)
 		goto err2;
 
@@ -1513,7 +1555,10 @@ static ssize_t ucma_leave_multicast(struct ucma_file *file,
 		goto out;
 	}
 
+	mutex_lock(&mc->ctx->mutex);
 	rdma_leave_multicast(mc->ctx->cm_id, (struct sockaddr *) &mc->addr);
+	mutex_unlock(&mc->ctx->mutex);
+
 	mutex_lock(&mc->ctx->file->mut);
 	ucma_cleanup_mc_events(mc);
 	list_del(&mc->list);
-- 
2.20.1

[PATCH AUTOSEL 5.6 092/149] scsi: qla2xxx: Handle NVME status iocb correctly

[Sasha Levin]

From: Arun Easi <aeasi@marvell.com>

[ Upstream commit 3d582b34992ba2fe4065f01019f0c08d12916faa ]

Certain state flags bit combinations are not checked and not handled
correctly. Plus, do not log a normal underrun situation where there is
no frame drop.

Link: https://lore.kernel.org/r/20200226224022.24518-17-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_isr.c | 47 ++++++++++++++++++++++++++++------
 1 file changed, 39 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index e40705d38cea7..afaf9d483cd29 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1910,6 +1910,7 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 	struct nvmefc_fcp_req *fd;
 	uint16_t        ret = QLA_SUCCESS;
 	uint16_t	comp_status = le16_to_cpu(sts->comp_status);
+	int		logit = 0;
 
 	iocb = &sp->u.iocb_cmd;
 	fcport = sp->fcport;
@@ -1920,6 +1921,12 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 	if (unlikely(iocb->u.nvme.aen_op))
 		atomic_dec(&sp->vha->hw->nvme_active_aen_cnt);
 
+	if (unlikely(comp_status != CS_COMPLETE))
+		logit = 1;
+
+	fd->transferred_length = fd->payload_length -
+	    le32_to_cpu(sts->residual_len);
+
 	/*
 	 * State flags: Bit 6 and 0.
 	 * If 0 is set, we don't care about 6.
@@ -1930,8 +1937,20 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 	 */
 	if (!(state_flags & (SF_FCP_RSP_DMA | SF_NVME_ERSP))) {
 		iocb->u.nvme.rsp_pyld_len = 0;
-	} else if ((state_flags & SF_FCP_RSP_DMA)) {
+	} else if ((state_flags & (SF_FCP_RSP_DMA | SF_NVME_ERSP)) ==
+			(SF_FCP_RSP_DMA | SF_NVME_ERSP)) {
+		/* Response already DMA'd to fd->rspaddr. */
 		iocb->u.nvme.rsp_pyld_len = le16_to_cpu(sts->nvme_rsp_pyld_len);
+	} else if ((state_flags & SF_FCP_RSP_DMA)) {
+		/*
+		 * Non-zero value in first 12 bytes of NVMe_RSP IU, treat this
+		 * as an error.
+		 */
+		iocb->u.nvme.rsp_pyld_len = 0;
+		fd->transferred_length = 0;
+		ql_dbg(ql_dbg_io, fcport->vha, 0x307a,
+			"Unexpected values in NVMe_RSP IU.\n");
+		logit = 1;
 	} else if (state_flags & SF_NVME_ERSP) {
 		uint32_t *inbuf, *outbuf;
 		uint16_t iter;
@@ -1954,16 +1973,28 @@ static void qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 		iter = iocb->u.nvme.rsp_pyld_len >> 2;
 		for (; iter; iter--)
 			*outbuf++ = swab32(*inbuf++);
-	} else { /* unhandled case */
-	    ql_log(ql_log_warn, fcport->vha, 0x503a,
-		"NVME-%s error. Unhandled state_flags of %x\n",
-		sp->name, state_flags);
 	}
 
-	fd->transferred_length = fd->payload_length -
-	    le32_to_cpu(sts->residual_len);
+	if (state_flags & SF_NVME_ERSP) {
+		struct nvme_fc_ersp_iu *rsp_iu = fd->rspaddr;
+		u32 tgt_xfer_len;
 
-	if (unlikely(comp_status != CS_COMPLETE))
+		tgt_xfer_len = be32_to_cpu(rsp_iu->xfrd_len);
+		if (fd->transferred_length != tgt_xfer_len) {
+			ql_dbg(ql_dbg_io, fcport->vha, 0x3079,
+				"Dropped frame(s) detected (sent/rcvd=%u/%u).\n",
+				tgt_xfer_len, fd->transferred_length);
+			logit = 1;
+		} else if (comp_status == CS_DATA_UNDERRUN) {
+			/*
+			 * Do not log if this is just an underflow and there
+			 * is no data loss.
+			 */
+			logit = 0;
+		}
+	}
+
+	if (unlikely(logit))
 		ql_log(ql_log_warn, fcport->vha, 0x5060,
 		   "NVME-%s ERR Handling - hdl=%x status(%x) tr_len:%x resid=%x  ox_id=%x\n",
 		   sp->name, sp->handle, comp_status,
-- 
2.20.1

[PATCH AUTOSEL 5.6 093/149] xfs: fix an undefined behaviour in _da3_path_shift

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 4982bff1ace1196843f55536fcd4cc119738fe39 ]

In xfs_da3_path_shift() "blk" can be assigned to state->path.blk[-1] if
state->path.active is 1 (which is a valid state) when it tries to add an
entry to a single dir leaf block and then to shift forward to see if
there's a sibling block that would be a better place to put the new
entry. This causes a UBSAN warning given negative array indices are
undefined behavior in C. In practice the warning is entirely harmless
given that "blk" is never dereferenced in this case, but it is still
better to fix up the warning and slightly improve the code.

 UBSAN: Undefined behaviour in fs/xfs/libxfs/xfs_da_btree.c:1989:14
 index -1 is out of range for type 'xfs_da_state_blk_t [5]'
 Call trace:
  dump_backtrace+0x0/0x2c8
  show_stack+0x20/0x2c
  dump_stack+0xe8/0x150
  __ubsan_handle_out_of_bounds+0xe4/0xfc
  xfs_da3_path_shift+0x860/0x86c [xfs]
  xfs_da3_node_lookup_int+0x7c8/0x934 [xfs]
  xfs_dir2_node_addname+0x2c8/0xcd0 [xfs]
  xfs_dir_createname+0x348/0x38c [xfs]
  xfs_create+0x6b0/0x8b4 [xfs]
  xfs_generic_create+0x12c/0x1f8 [xfs]
  xfs_vn_mknod+0x3c/0x4c [xfs]
  xfs_vn_create+0x34/0x44 [xfs]
  do_last+0xd4c/0x10c8
  path_openat+0xbc/0x2f4
  do_filp_open+0x74/0xf4
  do_sys_openat2+0x98/0x180
  __arm64_sys_openat+0xf8/0x170
  do_el0_svc+0x170/0x240
  el0_sync_handler+0x150/0x250
  el0_sync+0x164/0x180

Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/libxfs/xfs_da_btree.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/xfs/libxfs/xfs_da_btree.c b/fs/xfs/libxfs/xfs_da_btree.c
index 875e04f82541f..e864c3d47f60a 100644
--- a/fs/xfs/libxfs/xfs_da_btree.c
+++ b/fs/xfs/libxfs/xfs_da_btree.c
@@ -1986,7 +1986,8 @@ xfs_da3_path_shift(
 	ASSERT(path != NULL);
 	ASSERT((path->active > 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
 	level = (path->active-1) - 1;	/* skip bottom layer in path */
-	for (blk = &path->blk[level]; level >= 0; blk--, level--) {
+	for (; level >= 0; level--) {
+		blk = &path->blk[level];
 		xfs_da3_node_hdr_from_disk(dp->i_mount, &nodehdr,
 					   blk->bp->b_addr);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 094/149] RDMA/siw: Fix passive connection establishment

[Sasha Levin]

From: Bernard Metzler <bmt@zurich.ibm.com>

[ Upstream commit 33fb27fd54465c74cbffba6315b2f043e90cec4c ]

Holding the rtnl_lock while iterating a devices interface address list
potentially causes deadlocks with the cma_netdev_callback. While this was
implemented to limit the scope of a wildcard listen to addresses of the
current device only, a better solution limits the scope of the socket to
the device. This completely avoiding locking, and also results in
significant code simplification.

Fixes: c421651fa229 ("RDMA/siw: Add missing rtnl_lock around access to ifa")
Link: https://lore.kernel.org/r/20200228173534.26815-1-bmt@zurich.ibm.com
Reported-by: syzbot+55de90ab5f44172b0c90@syzkaller.appspotmail.com
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/siw/siw_cm.c | 137 +++++++----------------------
 1 file changed, 31 insertions(+), 106 deletions(-)

diff --git a/drivers/infiniband/sw/siw/siw_cm.c b/drivers/infiniband/sw/siw/siw_cm.c
index c5651a96b1964..559e5fd3bad8b 100644
--- a/drivers/infiniband/sw/siw/siw_cm.c
+++ b/drivers/infiniband/sw/siw/siw_cm.c
@@ -1769,14 +1769,23 @@ int siw_reject(struct iw_cm_id *id, const void *pdata, u8 pd_len)
 	return 0;
 }
 
-static int siw_listen_address(struct iw_cm_id *id, int backlog,
-			      struct sockaddr *laddr, int addr_family)
+/*
+ * siw_create_listen - Create resources for a listener's IWCM ID @id
+ *
+ * Starts listen on the socket address id->local_addr.
+ *
+ */
+int siw_create_listen(struct iw_cm_id *id, int backlog)
 {
 	struct socket *s;
 	struct siw_cep *cep = NULL;
 	struct siw_device *sdev = to_siw_dev(id->device);
+	int addr_family = id->local_addr.ss_family;
 	int rv = 0, s_val;
 
+	if (addr_family != AF_INET && addr_family != AF_INET6)
+		return -EAFNOSUPPORT;
+
 	rv = sock_create(addr_family, SOCK_STREAM, IPPROTO_TCP, &s);
 	if (rv < 0)
 		return rv;
@@ -1791,9 +1800,25 @@ static int siw_listen_address(struct iw_cm_id *id, int backlog,
 		siw_dbg(id->device, "setsockopt error: %d\n", rv);
 		goto error;
 	}
-	rv = s->ops->bind(s, laddr, addr_family == AF_INET ?
-				    sizeof(struct sockaddr_in) :
-				    sizeof(struct sockaddr_in6));
+	if (addr_family == AF_INET) {
+		struct sockaddr_in *laddr = &to_sockaddr_in(id->local_addr);
+
+		/* For wildcard addr, limit binding to current device only */
+		if (ipv4_is_zeronet(laddr->sin_addr.s_addr))
+			s->sk->sk_bound_dev_if = sdev->netdev->ifindex;
+
+		rv = s->ops->bind(s, (struct sockaddr *)laddr,
+				  sizeof(struct sockaddr_in));
+	} else {
+		struct sockaddr_in6 *laddr = &to_sockaddr_in6(id->local_addr);
+
+		/* For wildcard addr, limit binding to current device only */
+		if (ipv6_addr_any(&laddr->sin6_addr))
+			s->sk->sk_bound_dev_if = sdev->netdev->ifindex;
+
+		rv = s->ops->bind(s, (struct sockaddr *)laddr,
+				  sizeof(struct sockaddr_in6));
+	}
 	if (rv) {
 		siw_dbg(id->device, "socket bind error: %d\n", rv);
 		goto error;
@@ -1852,7 +1877,7 @@ static int siw_listen_address(struct iw_cm_id *id, int backlog,
 	list_add_tail(&cep->listenq, (struct list_head *)id->provider_data);
 	cep->state = SIW_EPSTATE_LISTENING;
 
-	siw_dbg(id->device, "Listen at laddr %pISp\n", laddr);
+	siw_dbg(id->device, "Listen at laddr %pISp\n", &id->local_addr);
 
 	return 0;
 
@@ -1910,106 +1935,6 @@ static void siw_drop_listeners(struct iw_cm_id *id)
 	}
 }
 
-/*
- * siw_create_listen - Create resources for a listener's IWCM ID @id
- *
- * Listens on the socket address id->local_addr.
- *
- * If the listener's @id provides a specific local IP address, at most one
- * listening socket is created and associated with @id.
- *
- * If the listener's @id provides the wildcard (zero) local IP address,
- * a separate listen is performed for each local IP address of the device
- * by creating a listening socket and binding to that local IP address.
- *
- */
-int siw_create_listen(struct iw_cm_id *id, int backlog)
-{
-	struct net_device *dev = to_siw_dev(id->device)->netdev;
-	int rv = 0, listeners = 0;
-
-	siw_dbg(id->device, "backlog %d\n", backlog);
-
-	/*
-	 * For each attached address of the interface, create a
-	 * listening socket, if id->local_addr is the wildcard
-	 * IP address or matches the IP address.
-	 */
-	if (id->local_addr.ss_family == AF_INET) {
-		struct in_device *in_dev = in_dev_get(dev);
-		struct sockaddr_in s_laddr;
-		const struct in_ifaddr *ifa;
-
-		if (!in_dev) {
-			rv = -ENODEV;
-			goto out;
-		}
-		memcpy(&s_laddr, &id->local_addr, sizeof(s_laddr));
-
-		siw_dbg(id->device, "laddr %pISp\n", &s_laddr);
-
-		rtnl_lock();
-		in_dev_for_each_ifa_rtnl(ifa, in_dev) {
-			if (ipv4_is_zeronet(s_laddr.sin_addr.s_addr) ||
-			    s_laddr.sin_addr.s_addr == ifa->ifa_address) {
-				s_laddr.sin_addr.s_addr = ifa->ifa_address;
-
-				rv = siw_listen_address(id, backlog,
-						(struct sockaddr *)&s_laddr,
-						AF_INET);
-				if (!rv)
-					listeners++;
-			}
-		}
-		rtnl_unlock();
-		in_dev_put(in_dev);
-	} else if (id->local_addr.ss_family == AF_INET6) {
-		struct inet6_dev *in6_dev = in6_dev_get(dev);
-		struct inet6_ifaddr *ifp;
-		struct sockaddr_in6 *s_laddr = &to_sockaddr_in6(id->local_addr);
-
-		if (!in6_dev) {
-			rv = -ENODEV;
-			goto out;
-		}
-		siw_dbg(id->device, "laddr %pISp\n", &s_laddr);
-
-		rtnl_lock();
-		list_for_each_entry(ifp, &in6_dev->addr_list, if_list) {
-			if (ifp->flags & (IFA_F_TENTATIVE | IFA_F_DEPRECATED))
-				continue;
-			if (ipv6_addr_any(&s_laddr->sin6_addr) ||
-			    ipv6_addr_equal(&s_laddr->sin6_addr, &ifp->addr)) {
-				struct sockaddr_in6 bind_addr  = {
-					.sin6_family = AF_INET6,
-					.sin6_port = s_laddr->sin6_port,
-					.sin6_flowinfo = 0,
-					.sin6_addr = ifp->addr,
-					.sin6_scope_id = dev->ifindex };
-
-				rv = siw_listen_address(id, backlog,
-						(struct sockaddr *)&bind_addr,
-						AF_INET6);
-				if (!rv)
-					listeners++;
-			}
-		}
-		rtnl_unlock();
-		in6_dev_put(in6_dev);
-	} else {
-		rv = -EAFNOSUPPORT;
-	}
-out:
-	if (listeners)
-		rv = 0;
-	else if (!rv)
-		rv = -EINVAL;
-
-	siw_dbg(id->device, "%s\n", rv ? "FAIL" : "OK");
-
-	return rv;
-}
-
 int siw_destroy_listen(struct iw_cm_id *id)
 {
 	if (!id->provider_data) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 095/149] drm/amd/display: Fix dmub_psr_destroy()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e599f01f44a77578c43530b027886933d9d2bb5b ]

This is freeing the wrong variable so it will crash.  It should be
freeing "*dmub" instead of "dmub".

Fixes: 4c1a1335dfe0 ("drm/amd/display: Driverside changes to support PSR in DMCUB")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c b/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c
index 225955ec6d392..5fd3b59f183b7 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c
@@ -215,6 +215,6 @@ struct dmub_psr *dmub_psr_create(struct dc_context *ctx)
  */
 void dmub_psr_destroy(struct dmub_psr **dmub)
 {
-	kfree(dmub);
+	kfree(*dmub);
 	*dmub = NULL;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 096/149] Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl

[Sasha Levin]

From: Qiujun Huang <hqjagain@gmail.com>

[ Upstream commit 71811cac8532b2387b3414f7cd8fe9e497482864 ]

Needn't call 'rfcomm_dlc_put' here, because 'rfcomm_dlc_exists' didn't
increase dlc->refcnt.

Reported-by: syzbot+4496e82090657320efc6@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/rfcomm/tty.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index 0c7d31c6c18cc..a58584949a955 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -413,10 +413,8 @@ static int __rfcomm_create_dev(struct sock *sk, void __user *arg)
 		dlc = rfcomm_dlc_exists(&req.src, &req.dst, req.channel);
 		if (IS_ERR(dlc))
 			return PTR_ERR(dlc);
-		else if (dlc) {
-			rfcomm_dlc_put(dlc);
+		if (dlc)
 			return -EBUSY;
-		}
 		dlc = rfcomm_dlc_alloc(GFP_KERNEL);
 		if (!dlc)
 			return -ENOMEM;
-- 
2.20.1

[PATCH AUTOSEL 5.6 097/149] xfs: clear PF_MEMALLOC before exiting xfsaild thread

[Sasha Levin]

From: Eric Biggers <ebiggers@google.com>

[ Upstream commit 10a98cb16d80be3595fdb165fad898bb28b8b6d2 ]

Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit().  That can confuse things.  In particular, if BSD
process accounting is enabled, then do_exit() writes data to an
accounting file.  If that file has FS_SYNC_FL set, then this write
occurs synchronously and can misbehave if PF_MEMALLOC is set.

For example, if the accounting file is located on an XFS filesystem,
then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data
doesn't get written when it should.  Or if the accounting file is
located on an ext4 filesystem without a journal, then a WARN_ON_ONCE()
in ext4_write_inode() is triggered and the inode doesn't get written.

Fix this in xfsaild() by using the helper functions to save and restore
PF_MEMALLOC.

This can be reproduced as follows in the kvm-xfstests test appliance
modified to add the 'acct' Debian package, and with kvm-xfstests's
recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y:

        mkfs.xfs -f /dev/vdb
        mount /vdb
        touch /vdb/file
        chattr +S /vdb/file
        accton /vdb/file
        mkfs.xfs -f /dev/vdc
        mount /vdc
        umount /vdc

It causes:
	WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534
	CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
	RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534
	[...]
	Call Trace:
	 write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238
	 iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642
	 xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578
	 do_writepages+0x41/0xe0 mm/page-writeback.c:2344
	 __filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421
	 file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760
	 xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114
	 generic_write_sync include/linux/fs.h:2867 [inline]
	 xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691
	 call_write_iter include/linux/fs.h:1901 [inline]
	 new_sync_write+0x130/0x1d0 fs/read_write.c:483
	 __kernel_write+0x54/0xe0 fs/read_write.c:515
	 do_acct_process+0x122/0x170 kernel/acct.c:522
	 slow_acct_process kernel/acct.c:581 [inline]
	 acct_process+0x1d4/0x27c kernel/acct.c:607
	 do_exit+0x83d/0xbc0 kernel/exit.c:791
	 kthread+0xf1/0x140 kernel/kthread.c:257
	 ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352

This bug was originally reported by syzbot at
https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com.

Reported-by: syzbot+1f9dc49e8de2582d90c2@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_trans_ail.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index 00cc5b8734be8..3bc570c90ad97 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -529,8 +529,9 @@ xfsaild(
 {
 	struct xfs_ail	*ailp = data;
 	long		tout = 0;	/* milliseconds */
+	unsigned int	noreclaim_flag;
 
-	current->flags |= PF_MEMALLOC;
+	noreclaim_flag = memalloc_noreclaim_save();
 	set_freezable();
 
 	while (1) {
@@ -601,6 +602,7 @@ xfsaild(
 		tout = xfsaild_push(ailp);
 	}
 
+	memalloc_noreclaim_restore(noreclaim_flag);
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 098/149] ath10k: start recovery process when read int status fail for sdio

[Sasha Levin]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit 37b7ecb75627699e96750db1e0c5ac56224245df ]

When running simulate crash stress test, it happened
"failed to read from address 0x800: -110".

Test steps:
1. Run command continuous
echo soft > /sys/kernel/debug/ieee80211/phy0/ath10k/simulate_fw_crash

2. error happened and it did not begin recovery for long time.
[74377.334846] ath10k_sdio mmc1:0001:1: simulating soft firmware crash
[74378.378217] ath10k_sdio mmc1:0001:1: failed to read from address 0x800: -110
[74378.378371] ath10k_sdio mmc1:0001:1: failed to process pending SDIO interrupts: -110

It has sdio errors since it can not read MBOX_HOST_INT_STATUS_ADDRESS,
then it has to do recovery process to recovery ath10k.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 9208291aaca3d..8b640a78f7ca4 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -953,8 +953,11 @@ static int ath10k_sdio_mbox_read_int_status(struct ath10k *ar,
 	 */
 	ret = ath10k_sdio_read(ar, MBOX_HOST_INT_STATUS_ADDRESS,
 			       irq_proc_reg, sizeof(*irq_proc_reg));
-	if (ret)
+	if (ret) {
+		queue_work(ar->workqueue, &ar->restart_work);
+		ath10k_warn(ar, "read int status fail, start recovery\n");
 		goto out;
+	}
 
 	/* Update only those registers that are enabled */
 	*host_int_status = irq_proc_reg->host_int_status &
-- 
2.20.1

[PATCH AUTOSEL 5.6 099/149] scsi: aacraid: Disabling TM path and only processing IOP reset

[Sasha Levin]

From: Sagar Biradar <Sagar.Biradar@microchip.com>

[ Upstream commit bef18d308a2215eff8c3411a23d7f34604ce56c3 ]

Fixes the occasional adapter panic when sg_reset is issued with -d, -t, -b
and -H flags.  Removal of command type HBA_IU_TYPE_SCSI_TM_REQ in
aac_hba_send since iu_type, request_id and fib_flags are not populated.
Device and target reset handlers are made to send TMF commands only when
reset_state is 0.

Link: https://lore.kernel.org/r/1581553771-25796-1-git-send-email-Sagar.Biradar@microchip.com
Reviewed-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aacraid/commsup.c |  2 +-
 drivers/scsi/aacraid/linit.c   | 34 +++++++++++++++++++++++++---------
 2 files changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 5a8a999606ea3..5118bee865b39 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -729,7 +729,7 @@ int aac_hba_send(u8 command, struct fib *fibptr, fib_callback callback,
 		hbacmd->request_id =
 			cpu_to_le32((((u32)(fibptr - dev->fibs)) << 2) + 1);
 		fibptr->flags |= FIB_CONTEXT_FLAG_SCSI_CMD;
-	} else if (command != HBA_IU_TYPE_SCSI_TM_REQ)
+	} else
 		return -EINVAL;
 
 
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index ee6bc2f9b80ad..9130e038c45fb 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -731,7 +731,11 @@ static int aac_eh_abort(struct scsi_cmnd* cmd)
 		status = aac_hba_send(HBA_IU_TYPE_SCSI_TM_REQ, fib,
 				  (fib_callback) aac_hba_callback,
 				  (void *) cmd);
-
+		if (status != -EINPROGRESS) {
+			aac_fib_complete(fib);
+			aac_fib_free(fib);
+			return ret;
+		}
 		/* Wait up to 15 secs for completion */
 		for (count = 0; count < 15; ++count) {
 			if (cmd->SCp.sent_command) {
@@ -910,11 +914,11 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
 
 	info = &aac->hba_map[bus][cid];
 
-	if (info->devtype != AAC_DEVTYPE_NATIVE_RAW &&
-	    info->reset_state > 0)
+	if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
+	 !(info->reset_state > 0)))
 		return FAILED;
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+	pr_err("%s: Host device reset request. SCSI hang ?\n",
 	       AAC_DRIVERNAME);
 
 	fib = aac_fib_alloc(aac);
@@ -929,7 +933,12 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
 	status = aac_hba_send(command, fib,
 			      (fib_callback) aac_tmf_callback,
 			      (void *) info);
-
+	if (status != -EINPROGRESS) {
+		info->reset_state = 0;
+		aac_fib_complete(fib);
+		aac_fib_free(fib);
+		return ret;
+	}
 	/* Wait up to 15 seconds for completion */
 	for (count = 0; count < 15; ++count) {
 		if (info->reset_state == 0) {
@@ -968,11 +977,11 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
 
 	info = &aac->hba_map[bus][cid];
 
-	if (info->devtype != AAC_DEVTYPE_NATIVE_RAW &&
-	    info->reset_state > 0)
+	if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
+	 !(info->reset_state > 0)))
 		return FAILED;
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+	pr_err("%s: Host target reset request. SCSI hang ?\n",
 	       AAC_DRIVERNAME);
 
 	fib = aac_fib_alloc(aac);
@@ -989,6 +998,13 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
 			      (fib_callback) aac_tmf_callback,
 			      (void *) info);
 
+	if (status != -EINPROGRESS) {
+		info->reset_state = 0;
+		aac_fib_complete(fib);
+		aac_fib_free(fib);
+		return ret;
+	}
+
 	/* Wait up to 15 seconds for completion */
 	for (count = 0; count < 15; ++count) {
 		if (info->reset_state <= 0) {
@@ -1041,7 +1057,7 @@ static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
 		}
 	}
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME);
+	pr_err("%s: Host bus reset request. SCSI hang ?\n", AAC_DRIVERNAME);
 
 	/*
 	 * Check the health of the controller
-- 
2.20.1

[PATCH AUTOSEL 5.6 100/149] scsi: core: avoid repetitive logging of device offline messages

[Sasha Levin]

From: "Ewan D. Milne" <emilne@redhat.com>

[ Upstream commit b0962c53bde9a485c8ebc401fa1dbe821a76bc3e ]

Large queues of I/O to offline devices that are eventually submitted when
devices are unblocked result in a many repeated "rejecting I/O to offline
device" messages.  These messages can fill up the dmesg buffer in crash
dumps so no useful prior messages remain.  In addition, if a serial console
is used, the flood of messages can cause a hard lockup in the console code.

Introduce a flag indicating the message has already been logged for the
device, and reset the flag when scsi_device_set_state() changes the device
state.

Link: https://lore.kernel.org/r/20200311143930.20674-1-emilne@redhat.com
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_lib.c    | 8 ++++++--
 include/scsi/scsi_device.h | 3 +++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 610ee41fa54cb..a45e7289dbbe7 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1240,8 +1240,11 @@ scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
 		 * commands.  The device must be brought online
 		 * before trying any recovery commands.
 		 */
-		sdev_printk(KERN_ERR, sdev,
-			    "rejecting I/O to offline device\n");
+		if (!sdev->offline_already) {
+			sdev->offline_already = true;
+			sdev_printk(KERN_ERR, sdev,
+				    "rejecting I/O to offline device\n");
+		}
 		return BLK_STS_IOERR;
 	case SDEV_DEL:
 		/*
@@ -2340,6 +2343,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
 		break;
 
 	}
+	sdev->offline_already = false;
 	sdev->sdev_state = state;
 	return 0;
 
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index f8312a3e5b429..cd9656ff3c43c 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -204,6 +204,9 @@ struct scsi_device {
 	unsigned unmap_limit_for_ws:1;	/* Use the UNMAP limit for WRITE SAME */
 	unsigned rpm_autosuspend:1;	/* Enable runtime autosuspend at device
 					 * creation time */
+
+	bool offline_already;		/* Device offline message logged */
+
 	atomic_t disk_events_disable_depth; /* disable depth for disk events */
 
 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
-- 
2.20.1

[PATCH AUTOSEL 5.6 101/149] tty: serial: qcom_geni_serial: No need to stop tx/rx on UART shutdown

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit e83766334f96b3396a71c7baa3b0b53dfd5190cd ]

On a board using qcom_geni_serial I found that I could no longer
interact with kdb if I got a crash after the "agetty" running on the
same serial port was killed.  This meant that various classes of
crashes that happened at reboot time were undebuggable.

Reading through the code, I couldn't figure out why qcom_geni_serial
felt the need to run so much code at port shutdown time.  All we need
to do is disable the interrupt.

After I make this change then a hardcoded kgdb_breakpoint in some late
shutdown code now allows me to interact with the debugger.  I also
could freely close / re-open the port without problems.

Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200313134635.1.Icf54c533065306b02b880c46dfd401d8db34e213@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 0bd1684cabb39..043c6141f661e 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -818,17 +818,11 @@ static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
 
 static void qcom_geni_serial_shutdown(struct uart_port *uport)
 {
-	unsigned long flags;
-
 	/* Stop the console before stopping the current tx */
 	if (uart_console(uport))
 		console_stop(uport->cons);
 
 	disable_irq(uport->irq);
-	spin_lock_irqsave(&uport->lock, flags);
-	qcom_geni_serial_stop_tx(uport);
-	qcom_geni_serial_stop_rx(uport);
-	spin_unlock_irqrestore(&uport->lock, flags);
 }
 
 static int qcom_geni_serial_port_setup(struct uart_port *uport)
-- 
2.20.1

[PATCH AUTOSEL 5.6 102/149] selftests: KVM: s390: fix early guest crash

[Sasha Levin]

From: Christian Borntraeger <borntraeger@de.ibm.com>

[ Upstream commit 41cbed5b07b5f6ca4ae567059ae7f0ffad1fd454 ]

The guest crashes very early due to changes in the control registers
used by dynamic address translation. Let us use different registers
that will not crash the guest.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kvm/s390x/resets.c | 27 +++++++++++-----------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/tools/testing/selftests/kvm/s390x/resets.c b/tools/testing/selftests/kvm/s390x/resets.c
index 1485bc6c8999f..cbb343ad5d424 100644
--- a/tools/testing/selftests/kvm/s390x/resets.c
+++ b/tools/testing/selftests/kvm/s390x/resets.c
@@ -23,25 +23,24 @@ struct kvm_run *run;
 struct kvm_sync_regs *regs;
 static uint64_t regs_null[16];
 
-static uint64_t crs[16] = { 0x40000ULL,
-			    0x42000ULL,
-			    0, 0, 0, 0, 0,
-			    0x43000ULL,
-			    0, 0, 0, 0, 0,
-			    0x44000ULL,
-			    0, 0
-};
-
 static void guest_code_initial(void)
 {
-	/* Round toward 0 */
-	uint32_t fpc = 0x11;
+	/* set several CRs to "safe" value */
+	unsigned long cr2_59 = 0x10;	/* enable guarded storage */
+	unsigned long cr8_63 = 0x1;	/* monitor mask = 1 */
+	unsigned long cr10 = 1;		/* PER START */
+	unsigned long cr11 = -1;	/* PER END */
+
 
 	/* Dirty registers */
 	asm volatile (
-		"	lctlg	0,15,%0\n"
-		"	sfpc	%1\n"
-		: : "Q" (crs), "d" (fpc));
+		"	lghi	2,0x11\n"	/* Round toward 0 */
+		"	sfpc	2\n"		/* set fpc to !=0 */
+		"	lctlg	2,2,%0\n"
+		"	lctlg	8,8,%1\n"
+		"	lctlg	10,10,%2\n"
+		"	lctlg	11,11,%3\n"
+		: : "m" (cr2_59), "m" (cr8_63), "m" (cr10), "m" (cr11) : "2");
 	GUEST_SYNC(0);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 103/149] RDMA/cm: Remove a race freeing timewait_info

[Sasha Levin]

From: Jason Gunthorpe <jgg@mellanox.com>

[ Upstream commit bede86a39d9dc3387ac00dcb8e1ac221676b2f25 ]

When creating a cm_id during REQ the id immediately becomes visible to the
other MAD handlers, and shortly after the state is moved to IB_CM_REQ_RCVD

This allows cm_rej_handler() to run concurrently and free the work:

        CPU 0                                CPU1
 cm_req_handler()
  ib_create_cm_id()
  cm_match_req()
    id_priv->state = IB_CM_REQ_RCVD
                                       cm_rej_handler()
                                         cm_acquire_id()
                                         spin_lock(&id_priv->lock)
                                         switch (id_priv->state)
  					   case IB_CM_REQ_RCVD:
                                            cm_reset_to_idle()
                                             kfree(id_priv->timewait_info);
   goto destroy
  destroy:
    kfree(id_priv->timewait_info);
                                             id_priv->timewait_info = NULL

Causing a double free or worse.

Do not free the timewait_info without also holding the
id_priv->lock. Simplify this entire flow by making the free unconditional
during cm_destroy_id() and removing the confusing special case error
unwind during creation of the timewait_info.

This also fixes a leak of the timewait if cm_destroy_id() is called in
IB_CM_ESTABLISHED with an XRC TGT QP. The state machine will be left in
ESTABLISHED while it needed to transition through IB_CM_TIMEWAIT to
release the timewait pointer.

Also fix a leak of the timewait_info if the caller mis-uses the API and
does ib_send_cm_reqs().

Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20200310092545.251365-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cm.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index f3a845c100384..180f945a92390 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -1055,14 +1055,22 @@ static void cm_destroy_id(struct ib_cm_id *cm_id, int err)
 		break;
 	}
 
-	spin_lock_irq(&cm.lock);
+	spin_lock_irq(&cm_id_priv->lock);
+	spin_lock(&cm.lock);
+	/* Required for cleanup paths related cm_req_handler() */
+	if (cm_id_priv->timewait_info) {
+		cm_cleanup_timewait(cm_id_priv->timewait_info);
+		kfree(cm_id_priv->timewait_info);
+		cm_id_priv->timewait_info = NULL;
+	}
 	if (!list_empty(&cm_id_priv->altr_list) &&
 	    (!cm_id_priv->altr_send_port_not_ready))
 		list_del(&cm_id_priv->altr_list);
 	if (!list_empty(&cm_id_priv->prim_list) &&
 	    (!cm_id_priv->prim_send_port_not_ready))
 		list_del(&cm_id_priv->prim_list);
-	spin_unlock_irq(&cm.lock);
+	spin_unlock(&cm.lock);
+	spin_unlock_irq(&cm_id_priv->lock);
 
 	cm_free_id(cm_id->local_id);
 	cm_deref_id(cm_id_priv);
@@ -1414,7 +1422,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id,
 	/* Verify that we're not in timewait. */
 	cm_id_priv = container_of(cm_id, struct cm_id_private, id);
 	spin_lock_irqsave(&cm_id_priv->lock, flags);
-	if (cm_id->state != IB_CM_IDLE) {
+	if (cm_id->state != IB_CM_IDLE || WARN_ON(cm_id_priv->timewait_info)) {
 		spin_unlock_irqrestore(&cm_id_priv->lock, flags);
 		ret = -EINVAL;
 		goto out;
@@ -1432,12 +1440,12 @@ int ib_send_cm_req(struct ib_cm_id *cm_id,
 				 param->ppath_sgid_attr, &cm_id_priv->av,
 				 cm_id_priv);
 	if (ret)
-		goto error1;
+		goto out;
 	if (param->alternate_path) {
 		ret = cm_init_av_by_path(param->alternate_path, NULL,
 					 &cm_id_priv->alt_av, cm_id_priv);
 		if (ret)
-			goto error1;
+			goto out;
 	}
 	cm_id->service_id = param->service_id;
 	cm_id->service_mask = ~cpu_to_be64(0);
@@ -1455,7 +1463,7 @@ int ib_send_cm_req(struct ib_cm_id *cm_id,
 
 	ret = cm_alloc_msg(cm_id_priv, &cm_id_priv->msg);
 	if (ret)
-		goto error1;
+		goto out;
 
 	req_msg = (struct cm_req_msg *) cm_id_priv->msg->mad;
 	cm_format_req(req_msg, cm_id_priv, param);
@@ -1478,7 +1486,6 @@ int ib_send_cm_req(struct ib_cm_id *cm_id,
 	return 0;
 
 error2:	cm_free_msg(cm_id_priv->msg);
-error1:	kfree(cm_id_priv->timewait_info);
 out:	return ret;
 }
 EXPORT_SYMBOL(ib_send_cm_req);
@@ -2011,7 +2018,7 @@ static int cm_req_handler(struct cm_work *work)
 		pr_debug("%s: local_id %d, no listen_cm_id_priv\n", __func__,
 			 be32_to_cpu(cm_id->local_id));
 		ret = -EINVAL;
-		goto free_timeinfo;
+		goto destroy;
 	}
 
 	cm_id_priv->id.cm_handler = listen_cm_id_priv->id.cm_handler;
@@ -2101,8 +2108,6 @@ static int cm_req_handler(struct cm_work *work)
 rejected:
 	refcount_dec(&cm_id_priv->refcount);
 	cm_deref_id(listen_cm_id_priv);
-free_timeinfo:
-	kfree(cm_id_priv->timewait_info);
 destroy:
 	ib_destroy_cm_id(cm_id);
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.6 104/149] KVM: PPC: Book3S HV: Treat TM-related invalid form instructions on P9 like the valid ones

[Sasha Levin]

From: Gustavo Romero <gromero@linux.ibm.com>

[ Upstream commit 1dff3064c764b5a51c367b949b341d2e38972bec ]

On P9 DD2.2 due to a CPU defect some TM instructions need to be emulated by
KVM. This is handled at first by the hardware raising a softpatch interrupt
when certain TM instructions that need KVM assistance are executed in the
guest. Althought some TM instructions per Power ISA are invalid forms they
can raise a softpatch interrupt too. For instance, 'tresume.' instruction
as defined in the ISA must have bit 31 set (1), but an instruction that
matches 'tresume.' PO and XO opcode fields but has bit 31 not set (0), like
0x7cfe9ddc, also raises a softpatch interrupt. Similarly for 'treclaim.'
and 'trechkpt.' instructions with bit 31 = 0, i.e. 0x7c00075c and
0x7c0007dc, respectively. Hence, if a code like the following is executed
in the guest it will raise a softpatch interrupt just like a 'tresume.'
when the TM facility is enabled ('tabort. 0' in the example is used only
to enable the TM facility):

int main() { asm("tabort. 0; .long 0x7cfe9ddc;"); }

Currently in such a case KVM throws a complete trace like:

[345523.705984] WARNING: CPU: 24 PID: 64413 at arch/powerpc/kvm/book3s_hv_tm.c:211 kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.705985] Modules linked in: kvm_hv(E) xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat
iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ebtable_filter ebtables ip6table_filter
ip6_tables iptable_filter bridge stp llc sch_fq_codel ipmi_powernv at24 vmx_crypto ipmi_devintf ipmi_msghandler
ibmpowernv uio_pdrv_genirq kvm opal_prd uio leds_powernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp
libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456
async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear tg3
crct10dif_vpmsum crc32c_vpmsum ipr [last unloaded: kvm_hv]
[345523.706030] CPU: 24 PID: 64413 Comm: CPU 0/KVM Tainted: G        W   E     5.5.0+ #1
[345523.706031] NIP:  c0080000072cb9c0 LR: c0080000072b5e80 CTR: c0080000085c7850
[345523.706034] REGS: c000000399467680 TRAP: 0700   Tainted: G        W   E      (5.5.0+)
[345523.706034] MSR:  900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 24022428  XER: 00000000
[345523.706042] CFAR: c0080000072b5e7c IRQMASK: 0
                GPR00: c0080000072b5e80 c000000399467910 c0080000072db500 c000000375ccc720
                GPR04: c000000375ccc720 00000003fbec0000 0000a10395dda5a6 0000000000000000
                GPR08: 000000007cfe9ddc 7cfe9ddc000005dc 7cfe9ddc7c0005dc c0080000072cd530
                GPR12: c0080000085c7850 c0000003fffeb800 0000000000000001 00007dfb737f0000
                GPR16: c0002001edcca558 0000000000000000 0000000000000000 0000000000000001
                GPR20: c000000001b21258 c0002001edcca558 0000000000000018 0000000000000000
                GPR24: 0000000001000000 ffffffffffffffff 0000000000000001 0000000000001500
                GPR28: c0002001edcc4278 c00000037dd80000 800000050280f033 c000000375ccc720
[345523.706062] NIP [c0080000072cb9c0] kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.706065] LR [c0080000072b5e80] kvmppc_handle_exit_hv.isra.53+0x3e8/0x798 [kvm_hv]
[345523.706066] Call Trace:
[345523.706069] [c000000399467910] [c000000399467940] 0xc000000399467940 (unreliable)
[345523.706071] [c000000399467950] [c000000399467980] 0xc000000399467980
[345523.706075] [c0000003994679f0] [c0080000072bd1c4] kvmhv_run_single_vcpu+0xa1c/0xb80 [kvm_hv]
[345523.706079] [c000000399467ac0] [c0080000072bd8e0] kvmppc_vcpu_run_hv+0x5b8/0xb00 [kvm_hv]
[345523.706087] [c000000399467b90] [c0080000085c93cc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[345523.706095] [c000000399467bb0] [c0080000085c582c] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[345523.706101] [c000000399467c40] [c0080000085b7498] kvm_vcpu_ioctl+0x3d0/0x7b0 [kvm]
[345523.706105] [c000000399467db0] [c0000000004adf9c] ksys_ioctl+0x13c/0x170
[345523.706107] [c000000399467e00] [c0000000004adff8] sys_ioctl+0x28/0x80
[345523.706111] [c000000399467e20] [c00000000000b278] system_call+0x5c/0x68
[345523.706112] Instruction dump:
[345523.706114] 419e0390 7f8a4840 409d0048 6d497c00 2f89075d 419e021c 6d497c00 2f8907dd
[345523.706119] 419e01c0 6d497c00 2f8905dd 419e00a4 <0fe00000> 38210040 38600000 ebc1fff0

and then treats the executed instruction as a 'nop'.

However the POWER9 User's Manual, in section "4.6.10 Book II Invalid
Forms", informs that for TM instructions bit 31 is in fact ignored, thus
for the TM-related invalid forms ignoring bit 31 and handling them like the
valid forms is an acceptable way to handle them. POWER8 behaves the same
way too.

This commit changes the handling of the cases here described by treating
the TM-related invalid forms that can generate a softpatch interrupt
just like their valid forms (w/ bit 31 = 1) instead of as a 'nop' and by
gently reporting any other unrecognized case to the host and treating it as
illegal instruction instead of throwing a trace and treating it as a 'nop'.

Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-By: Michael Neuling <mikey@neuling.org>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/kvm_asm.h      |  3 +++
 arch/powerpc/kvm/book3s_hv_tm.c         | 28 ++++++++++++++++++++-----
 arch/powerpc/kvm/book3s_hv_tm_builtin.c | 16 ++++++++++++--
 3 files changed, 40 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index 635fb154b33f9..a3633560493be 100644
--- a/arch/powerpc/include/asm/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -150,4 +150,7 @@
 
 #define KVM_INST_FETCH_FAILED	-1
 
+/* Extract PO and XOP opcode fields */
+#define PO_XOP_OPCODE_MASK 0xfc0007fe
+
 #endif /* __POWERPC_KVM_ASM_H__ */
diff --git a/arch/powerpc/kvm/book3s_hv_tm.c b/arch/powerpc/kvm/book3s_hv_tm.c
index 0db9374971697..cc90b8b823291 100644
--- a/arch/powerpc/kvm/book3s_hv_tm.c
+++ b/arch/powerpc/kvm/book3s_hv_tm.c
@@ -3,6 +3,8 @@
  * Copyright 2017 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kvm_host.h>
 
 #include <asm/kvm_ppc.h>
@@ -44,7 +46,18 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 	u64 newmsr, bescr;
 	int ra, rs;
 
-	switch (instr & 0xfc0007ff) {
+	/*
+	 * rfid, rfebb, and mtmsrd encode bit 31 = 0 since it's a reserved bit
+	 * in these instructions, so masking bit 31 out doesn't change these
+	 * instructions. For treclaim., tsr., and trechkpt. instructions if bit
+	 * 31 = 0 then they are per ISA invalid forms, however P9 UM, in section
+	 * 4.6.10 Book II Invalid Forms, informs specifically that ignoring bit
+	 * 31 is an acceptable way to handle these invalid forms that have
+	 * bit 31 = 0. Moreover, for emulation purposes both forms (w/ and wo/
+	 * bit 31 set) can generate a softpatch interrupt. Hence both forms
+	 * are handled below for these instructions so they behave the same way.
+	 */
+	switch (instr & PO_XOP_OPCODE_MASK) {
 	case PPC_INST_RFID:
 		/* XXX do we need to check for PR=0 here? */
 		newmsr = vcpu->arch.shregs.srr1;
@@ -105,7 +118,8 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.shregs.msr = newmsr;
 		return RESUME_GUEST;
 
-	case PPC_INST_TSR:
+	/* ignore bit 31, see comment above */
+	case (PPC_INST_TSR & PO_XOP_OPCODE_MASK):
 		/* check for PR=1 and arch 2.06 bit set in PCR */
 		if ((msr & MSR_PR) && (vcpu->arch.vcore->pcr & PCR_ARCH_206)) {
 			/* generate an illegal instruction interrupt */
@@ -140,7 +154,8 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.shregs.msr = msr;
 		return RESUME_GUEST;
 
-	case PPC_INST_TRECLAIM:
+	/* ignore bit 31, see comment above */
+	case (PPC_INST_TRECLAIM & PO_XOP_OPCODE_MASK):
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
 			/* generate an illegal instruction interrupt */
@@ -176,7 +191,8 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 		vcpu->arch.shregs.msr &= ~MSR_TS_MASK;
 		return RESUME_GUEST;
 
-	case PPC_INST_TRECHKPT:
+	/* ignore bit 31, see comment above */
+	case (PPC_INST_TRECHKPT & PO_XOP_OPCODE_MASK):
 		/* XXX do we need to check for PR=0 here? */
 		/* check for TM disabled in the HFSCR or MSR */
 		if (!(vcpu->arch.hfscr & HFSCR_TM)) {
@@ -208,6 +224,8 @@ int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu)
 	}
 
 	/* What should we do here? We didn't recognize the instruction */
-	WARN_ON_ONCE(1);
+	kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
+	pr_warn_ratelimited("Unrecognized TM-related instruction %#x for emulation", instr);
+
 	return RESUME_GUEST;
 }
diff --git a/arch/powerpc/kvm/book3s_hv_tm_builtin.c b/arch/powerpc/kvm/book3s_hv_tm_builtin.c
index 217246279dfae..fad931f224efd 100644
--- a/arch/powerpc/kvm/book3s_hv_tm_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_tm_builtin.c
@@ -23,7 +23,18 @@ int kvmhv_p9_tm_emulation_early(struct kvm_vcpu *vcpu)
 	u64 newmsr, msr, bescr;
 	int rs;
 
-	switch (instr & 0xfc0007ff) {
+	/*
+	 * rfid, rfebb, and mtmsrd encode bit 31 = 0 since it's a reserved bit
+	 * in these instructions, so masking bit 31 out doesn't change these
+	 * instructions. For the tsr. instruction if bit 31 = 0 then it is per
+	 * ISA an invalid form, however P9 UM, in section 4.6.10 Book II Invalid
+	 * Forms, informs specifically that ignoring bit 31 is an acceptable way
+	 * to handle TM-related invalid forms that have bit 31 = 0. Moreover,
+	 * for emulation purposes both forms (w/ and wo/ bit 31 set) can
+	 * generate a softpatch interrupt. Hence both forms are handled below
+	 * for tsr. to make them behave the same way.
+	 */
+	switch (instr & PO_XOP_OPCODE_MASK) {
 	case PPC_INST_RFID:
 		/* XXX do we need to check for PR=0 here? */
 		newmsr = vcpu->arch.shregs.srr1;
@@ -73,7 +84,8 @@ int kvmhv_p9_tm_emulation_early(struct kvm_vcpu *vcpu)
 		vcpu->arch.shregs.msr = newmsr;
 		return 1;
 
-	case PPC_INST_TSR:
+	/* ignore bit 31, see comment above */
+	case (PPC_INST_TSR & PO_XOP_OPCODE_MASK):
 		/* we know the MSR has the TS field = S (0b01) here */
 		msr = vcpu->arch.shregs.msr;
 		/* check for PR=1 and arch 2.06 bit set in PCR */
-- 
2.20.1

[PATCH AUTOSEL 5.6 105/149] drm/msm: fix leaks if initialization fails

[Sasha Levin]

From: Pavel Machek <pavel@denx.de>

[ Upstream commit 66be340f827554cb1c8a1ed7dea97920b4085af2 ]

We should free resources in unlikely case of allocation failure.

Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_drv.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index e4b750b0c2d3f..7d985f8865bef 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -444,8 +444,10 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
 	if (!dev->dma_parms) {
 		dev->dma_parms = devm_kzalloc(dev, sizeof(*dev->dma_parms),
 					      GFP_KERNEL);
-		if (!dev->dma_parms)
-			return -ENOMEM;
+		if (!dev->dma_parms) {
+			ret = -ENOMEM;
+			goto err_msm_uninit;
+		}
 	}
 	dma_set_max_seg_size(dev, DMA_BIT_MASK(32));
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 106/149] drm/msm/a5xx: Always set an OPP supported hardware value

[Sasha Levin]

From: Jordan Crouse <jcrouse@codeaurora.org>

[ Upstream commit 0478b4fc5f37f4d494245fe7bcce3f531cf380e9 ]

If the opp table specifies opp-supported-hw as a property but the driver
has not set a supported hardware value the OPP subsystem will reject
all the table entries.

Set a "default" value that will match the default table entries but not
conflict with any possible real bin values. Also fix a small memory leak
and free the buffer allocated by nvmem_cell_read().

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index 7d9e63e20dedd..724024a2243a4 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -1446,18 +1446,31 @@ static const struct adreno_gpu_funcs funcs = {
 static void check_speed_bin(struct device *dev)
 {
 	struct nvmem_cell *cell;
-	u32 bin, val;
+	u32 val;
+
+	/*
+	 * If the OPP table specifies a opp-supported-hw property then we have
+	 * to set something with dev_pm_opp_set_supported_hw() or the table
+	 * doesn't get populated so pick an arbitrary value that should
+	 * ensure the default frequencies are selected but not conflict with any
+	 * actual bins
+	 */
+	val = 0x80;
 
 	cell = nvmem_cell_get(dev, "speed_bin");
 
-	/* If a nvmem cell isn't defined, nothing to do */
-	if (IS_ERR(cell))
-		return;
+	if (!IS_ERR(cell)) {
+		void *buf = nvmem_cell_read(cell, NULL);
+
+		if (!IS_ERR(buf)) {
+			u8 bin = *((u8 *) buf);
 
-	bin = *((u32 *) nvmem_cell_read(cell, NULL));
-	nvmem_cell_put(cell);
+			val = (1 << bin);
+			kfree(buf);
+		}
 
-	val = (1 << bin);
+		nvmem_cell_put(cell);
+	}
 
 	dev_pm_opp_set_supported_hw(dev, &val, 1);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 107/149] i2c: dev: Fix the race between the release of i2c_dev and cdev

[Sasha Levin]

From: Kevin Hao <haokexin@gmail.com>

[ Upstream commit 1413ef638abae4ab5621901cf4d8ef08a4a48ba6 ]

The struct cdev is embedded in the struct i2c_dev. In the current code,
we would free the i2c_dev struct directly in put_i2c_dev(), but the
cdev is manged by a kobject, and the release of it is not predictable.
So it is very possible that the i2c_dev is freed before the cdev is
entirely released. We can easily get the following call trace with
CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled.
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38
  WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0
  Modules linked in:
  CPU: 19 PID: 1 Comm: swapper/0 Tainted: G        W         5.2.20-yocto-standard+ #120
  Hardware name: Marvell OcteonTX CN96XX board (DT)
  pstate: 80c00089 (Nzcv daIf +PAN +UAO)
  pc : debug_print_object+0xb0/0xf0
  lr : debug_print_object+0xb0/0xf0
  sp : ffff00001292f7d0
  x29: ffff00001292f7d0 x28: ffff800b82151788
  x27: 0000000000000001 x26: ffff800b892c0000
  x25: ffff0000124a2558 x24: 0000000000000000
  x23: ffff00001107a1d8 x22: ffff0000116b5088
  x21: ffff800bdc6afca8 x20: ffff000012471ae8
  x19: ffff00001168f2c8 x18: 0000000000000010
  x17: 00000000fd6f304b x16: 00000000ee79de43
  x15: ffff800bc0e80568 x14: 79616c6564203a74
  x13: 6e6968207473696c x12: 5f72656d6974203a
  x11: ffff0000113f0018 x10: 0000000000000000
  x9 : 000000000000001f x8 : 0000000000000000
  x7 : ffff0000101294cc x6 : 0000000000000000
  x5 : 0000000000000000 x4 : 0000000000000001
  x3 : 00000000ffffffff x2 : 0000000000000000
  x1 : 387fc15c8ec0f200 x0 : 0000000000000000
  Call trace:
   debug_print_object+0xb0/0xf0
   __debug_check_no_obj_freed+0x19c/0x228
   debug_check_no_obj_freed+0x1c/0x28
   kfree+0x250/0x440
   put_i2c_dev+0x68/0x78
   i2cdev_detach_adapter+0x60/0xc8
   i2cdev_notifier_call+0x3c/0x70
   notifier_call_chain+0x8c/0xe8
   blocking_notifier_call_chain+0x64/0x88
   device_del+0x74/0x380
   device_unregister+0x54/0x78
   i2c_del_adapter+0x278/0x2d0
   unittest_i2c_bus_remove+0x3c/0x80
   platform_drv_remove+0x30/0x50
   device_release_driver_internal+0xf4/0x1c0
   driver_detach+0x58/0xa0
   bus_remove_driver+0x84/0xd8
   driver_unregister+0x34/0x60
   platform_driver_unregister+0x20/0x30
   of_unittest_overlay+0x8d4/0xbe0
   of_unittest+0xae8/0xb3c
   do_one_initcall+0xac/0x450
   do_initcall_level+0x208/0x224
   kernel_init_freeable+0x2d8/0x36c
   kernel_init+0x18/0x108
   ret_from_fork+0x10/0x1c
  irq event stamp: 3934661
  hardirqs last  enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58
  hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0
  softirqs last  enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628
  softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118

This is a common issue when using cdev embedded in a struct.
Fortunately, we already have a mechanism to solve this kind of issue.
Please see commit 233ed09d7fda ("chardev: add helper function to
register char devs with a struct device") for more detail.

In this patch, we choose to embed the struct device into the i2c_dev,
and use the API provided by the commit 233ed09d7fda to make sure that
the release of i2c_dev and cdev are in sequence.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/i2c-dev.c | 48 +++++++++++++++++++++++--------------------
 1 file changed, 26 insertions(+), 22 deletions(-)

diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 2ea4585d18c5e..94beacc41302f 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -40,7 +40,7 @@
 struct i2c_dev {
 	struct list_head list;
 	struct i2c_adapter *adap;
-	struct device *dev;
+	struct device dev;
 	struct cdev cdev;
 };
 
@@ -84,12 +84,14 @@ static struct i2c_dev *get_free_i2c_dev(struct i2c_adapter *adap)
 	return i2c_dev;
 }
 
-static void put_i2c_dev(struct i2c_dev *i2c_dev)
+static void put_i2c_dev(struct i2c_dev *i2c_dev, bool del_cdev)
 {
 	spin_lock(&i2c_dev_list_lock);
 	list_del(&i2c_dev->list);
 	spin_unlock(&i2c_dev_list_lock);
-	kfree(i2c_dev);
+	if (del_cdev)
+		cdev_device_del(&i2c_dev->cdev, &i2c_dev->dev);
+	put_device(&i2c_dev->dev);
 }
 
 static ssize_t name_show(struct device *dev,
@@ -628,6 +630,14 @@ static const struct file_operations i2cdev_fops = {
 
 static struct class *i2c_dev_class;
 
+static void i2cdev_dev_release(struct device *dev)
+{
+	struct i2c_dev *i2c_dev;
+
+	i2c_dev = container_of(dev, struct i2c_dev, dev);
+	kfree(i2c_dev);
+}
+
 static int i2cdev_attach_adapter(struct device *dev, void *dummy)
 {
 	struct i2c_adapter *adap;
@@ -644,27 +654,23 @@ static int i2cdev_attach_adapter(struct device *dev, void *dummy)
 
 	cdev_init(&i2c_dev->cdev, &i2cdev_fops);
 	i2c_dev->cdev.owner = THIS_MODULE;
-	res = cdev_add(&i2c_dev->cdev, MKDEV(I2C_MAJOR, adap->nr), 1);
-	if (res)
-		goto error_cdev;
-
-	/* register this i2c device with the driver core */
-	i2c_dev->dev = device_create(i2c_dev_class, &adap->dev,
-				     MKDEV(I2C_MAJOR, adap->nr), NULL,
-				     "i2c-%d", adap->nr);
-	if (IS_ERR(i2c_dev->dev)) {
-		res = PTR_ERR(i2c_dev->dev);
-		goto error;
+
+	device_initialize(&i2c_dev->dev);
+	i2c_dev->dev.devt = MKDEV(I2C_MAJOR, adap->nr);
+	i2c_dev->dev.class = i2c_dev_class;
+	i2c_dev->dev.parent = &adap->dev;
+	i2c_dev->dev.release = i2cdev_dev_release;
+	dev_set_name(&i2c_dev->dev, "i2c-%d", adap->nr);
+
+	res = cdev_device_add(&i2c_dev->cdev, &i2c_dev->dev);
+	if (res) {
+		put_i2c_dev(i2c_dev, false);
+		return res;
 	}
 
 	pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
 		 adap->name, adap->nr);
 	return 0;
-error:
-	cdev_del(&i2c_dev->cdev);
-error_cdev:
-	put_i2c_dev(i2c_dev);
-	return res;
 }
 
 static int i2cdev_detach_adapter(struct device *dev, void *dummy)
@@ -680,9 +686,7 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy)
 	if (!i2c_dev) /* attach_adapter must have failed */
 		return 0;
 
-	cdev_del(&i2c_dev->cdev);
-	put_i2c_dev(i2c_dev);
-	device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
+	put_i2c_dev(i2c_dev, true);
 
 	pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name);
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 108/149] KVM: PPC: Book3S HV: Check caller of H_SVM_* Hcalls

[Sasha Levin]

From: Laurent Dufour <ldufour@linux.ibm.com>

[ Upstream commit 8c47b6ff29e3d88484fe59d02f9db6de7e44e310 ]

The Hcall named H_SVM_* are reserved to the Ultravisor. However, nothing
prevent a malicious VM or SVM to call them. This could lead to weird result
and should be filtered out.

Checking the Secure bit of the calling MSR ensure that the call is coming
from either the Ultravisor or a SVM. But any system call made from a SVM
are going through the Ultravisor, and the Ultravisor should filter out
these malicious call. This way, only the Ultravisor is able to make such a
Hcall.

Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibnm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 2cefd071b8483..698701b4a10dc 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1074,25 +1074,35 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu)
 					 kvmppc_get_gpr(vcpu, 6));
 		break;
 	case H_SVM_PAGE_IN:
-		ret = kvmppc_h_svm_page_in(vcpu->kvm,
-					   kvmppc_get_gpr(vcpu, 4),
-					   kvmppc_get_gpr(vcpu, 5),
-					   kvmppc_get_gpr(vcpu, 6));
+		ret = H_UNSUPPORTED;
+		if (kvmppc_get_srr1(vcpu) & MSR_S)
+			ret = kvmppc_h_svm_page_in(vcpu->kvm,
+						   kvmppc_get_gpr(vcpu, 4),
+						   kvmppc_get_gpr(vcpu, 5),
+						   kvmppc_get_gpr(vcpu, 6));
 		break;
 	case H_SVM_PAGE_OUT:
-		ret = kvmppc_h_svm_page_out(vcpu->kvm,
-					    kvmppc_get_gpr(vcpu, 4),
-					    kvmppc_get_gpr(vcpu, 5),
-					    kvmppc_get_gpr(vcpu, 6));
+		ret = H_UNSUPPORTED;
+		if (kvmppc_get_srr1(vcpu) & MSR_S)
+			ret = kvmppc_h_svm_page_out(vcpu->kvm,
+						    kvmppc_get_gpr(vcpu, 4),
+						    kvmppc_get_gpr(vcpu, 5),
+						    kvmppc_get_gpr(vcpu, 6));
 		break;
 	case H_SVM_INIT_START:
-		ret = kvmppc_h_svm_init_start(vcpu->kvm);
+		ret = H_UNSUPPORTED;
+		if (kvmppc_get_srr1(vcpu) & MSR_S)
+			ret = kvmppc_h_svm_init_start(vcpu->kvm);
 		break;
 	case H_SVM_INIT_DONE:
-		ret = kvmppc_h_svm_init_done(vcpu->kvm);
+		ret = H_UNSUPPORTED;
+		if (kvmppc_get_srr1(vcpu) & MSR_S)
+			ret = kvmppc_h_svm_init_done(vcpu->kvm);
 		break;
 	case H_SVM_INIT_ABORT:
-		ret = kvmppc_h_svm_init_abort(vcpu->kvm);
+		ret = H_UNSUPPORTED;
+		if (kvmppc_get_srr1(vcpu) & MSR_S)
+			ret = kvmppc_h_svm_init_abort(vcpu->kvm);
 		break;
 
 	default:
-- 
2.20.1

[PATCH AUTOSEL 5.6 109/149] KVM: PPC: Book3S HV: H_SVM_INIT_START must call UV_RETURN

[Sasha Levin]

From: Laurent Dufour <ldufour@linux.ibm.com>

[ Upstream commit 377f02d487b5f74a2411fa01316ba4aff1819629 ]

When the call to UV_REGISTER_MEM_SLOT is failing, for instance because
there is not enough free secured memory, the Hypervisor (HV) has to call
UV_RETURN to report the error to the Ultravisor (UV). Then the UV will call
H_SVM_INIT_ABORT to abort the securing phase and go back to the calling VM.

If the kvm->arch.secure_guest is not set, in the return path rfid is called
but there is no valid context to get back to the SVM since the Hcall has
been routed by the Ultravisor.

Move the setting of kvm->arch.secure_guest earlier in
kvmppc_h_svm_init_start() so in the return path, UV_RETURN will be called
instead of rfid.

Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv_uvmem.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kvm/book3s_hv_uvmem.c b/arch/powerpc/kvm/book3s_hv_uvmem.c
index 79b1202b1c628..68dff151315cb 100644
--- a/arch/powerpc/kvm/book3s_hv_uvmem.c
+++ b/arch/powerpc/kvm/book3s_hv_uvmem.c
@@ -209,6 +209,8 @@ unsigned long kvmppc_h_svm_init_start(struct kvm *kvm)
 	int ret = H_SUCCESS;
 	int srcu_idx;
 
+	kvm->arch.secure_guest = KVMPPC_SECURE_INIT_START;
+
 	if (!kvmppc_uvmem_bitmap)
 		return H_UNSUPPORTED;
 
@@ -233,7 +235,6 @@ unsigned long kvmppc_h_svm_init_start(struct kvm *kvm)
 			goto out;
 		}
 	}
-	kvm->arch.secure_guest |= KVMPPC_SECURE_INIT_START;
 out:
 	srcu_read_unlock(&kvm->srcu, srcu_idx);
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.6 110/149] net: axienet: Propagate failure of DMA descriptor setup

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit ee44d0b78839b21591501424fd3cb3648cc803b5 ]

When we fail allocating the DMA buffers in axienet_dma_bd_init(), we
report this error, but carry on with initialisation nevertheless.

This leads to a kernel panic when the driver later wants to send a
packet, as it uses uninitialised data structures.

Make the axienet_device_reset() routine return an error value, as it
contains the DMA buffer initialisation. Make sure we propagate the error
up the chain and eventually fail the driver initialisation, to avoid
relying on non-initialised buffers.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 26 ++++++++++++++-----
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 7cebd5150bec4..d25548cca9d93 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -437,9 +437,10 @@ static void axienet_setoptions(struct net_device *ndev, u32 options)
 	lp->options |= options;
 }
 
-static void __axienet_device_reset(struct axienet_local *lp)
+static int __axienet_device_reset(struct axienet_local *lp)
 {
 	u32 timeout;
+
 	/* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset
 	 * process of Axi DMA takes a while to complete as all pending
 	 * commands/transfers will be flushed or completed during this
@@ -455,9 +456,11 @@ static void __axienet_device_reset(struct axienet_local *lp)
 		if (--timeout == 0) {
 			netdev_err(lp->ndev, "%s: DMA reset timeout!\n",
 				   __func__);
-			break;
+			return -ETIMEDOUT;
 		}
 	}
+
+	return 0;
 }
 
 /**
@@ -470,13 +473,17 @@ static void __axienet_device_reset(struct axienet_local *lp)
  * areconnected to Axi Ethernet reset lines, this in turn resets the Axi
  * Ethernet core. No separate hardware reset is done for the Axi Ethernet
  * core.
+ * Returns 0 on success or a negative error number otherwise.
  */
-static void axienet_device_reset(struct net_device *ndev)
+static int axienet_device_reset(struct net_device *ndev)
 {
 	u32 axienet_status;
 	struct axienet_local *lp = netdev_priv(ndev);
+	int ret;
 
-	__axienet_device_reset(lp);
+	ret = __axienet_device_reset(lp);
+	if (ret)
+		return ret;
 
 	lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE;
 	lp->options |= XAE_OPTION_VLAN;
@@ -491,9 +498,11 @@ static void axienet_device_reset(struct net_device *ndev)
 			lp->options |= XAE_OPTION_JUMBO;
 	}
 
-	if (axienet_dma_bd_init(ndev)) {
+	ret = axienet_dma_bd_init(ndev);
+	if (ret) {
 		netdev_err(ndev, "%s: descriptor allocation failed\n",
 			   __func__);
+		return ret;
 	}
 
 	axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET);
@@ -518,6 +527,8 @@ static void axienet_device_reset(struct net_device *ndev)
 	axienet_setoptions(ndev, lp->options);
 
 	netif_trans_update(ndev);
+
+	return 0;
 }
 
 /**
@@ -921,8 +932,9 @@ static int axienet_open(struct net_device *ndev)
 	 */
 	mutex_lock(&lp->mii_bus->mdio_lock);
 	axienet_mdio_disable(lp);
-	axienet_device_reset(ndev);
-	ret = axienet_mdio_enable(lp);
+	ret = axienet_device_reset(ndev);
+	if (ret == 0)
+		ret = axienet_mdio_enable(lp);
 	mutex_unlock(&lp->mii_bus->mdio_lock);
 	if (ret < 0)
 		return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.6 111/149] brcmfmac: Fix driver crash on USB control transfer timeout

[Sasha Levin]

From: Raveendran Somu <raveendran.somu@cypress.com>

[ Upstream commit 93a5bfbc7cad8bf3dea81c9bc07761c1226a0860 ]

When the control transfer gets timed out, the error status
was returned without killing that urb, this leads to using
the same urb. This issue causes the kernel crash as the same
urb is sumbitted multiple times. The fix is to kill the
urb for timeout transfer before returning error

Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585124429-97371-2-git-send-email-chi-hsien.lin@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index 575ed19e91951..10387a7f5d565 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -328,11 +328,12 @@ static int brcmf_usb_tx_ctlpkt(struct device *dev, u8 *buf, u32 len)
 		return err;
 	}
 	timeout = brcmf_usb_ioctl_resp_wait(devinfo);
-	clear_bit(0, &devinfo->ctl_op);
 	if (!timeout) {
 		brcmf_err("Txctl wait timed out\n");
+		usb_kill_urb(devinfo->ctl_urb);
 		err = -EIO;
 	}
+	clear_bit(0, &devinfo->ctl_op);
 	return err;
 }
 
@@ -358,11 +359,12 @@ static int brcmf_usb_rx_ctlpkt(struct device *dev, u8 *buf, u32 len)
 	}
 	timeout = brcmf_usb_ioctl_resp_wait(devinfo);
 	err = devinfo->ctl_urb_status;
-	clear_bit(0, &devinfo->ctl_op);
 	if (!timeout) {
 		brcmf_err("rxctl wait timed out\n");
+		usb_kill_urb(devinfo->ctl_urb);
 		err = -EIO;
 	}
+	clear_bit(0, &devinfo->ctl_op);
 	if (!err)
 		return devinfo->ctl_urb_actual_length;
 	else
-- 
2.20.1

[PATCH AUTOSEL 5.6 112/149] brcmfmac: Fix double freeing in the fmac usb data path

[Sasha Levin]

From: Raveendran Somu <raveendran.somu@cypress.com>

[ Upstream commit 78179869dc3f5c0059bbf5d931a2717f1ad97ecd ]

When the brcmf_fws_process_skb() fails to get hanger slot for
queuing the skb, it tries to free the skb.
But the caller brcmf_netdev_start_xmit() of that funciton frees
the packet on error return value.
This causes the double freeing and which caused the kernel crash.

Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585124429-97371-3-git-send-email-chi-hsien.lin@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
index 5e1a11c075517..10022c7653545 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
@@ -2145,8 +2145,7 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 		brcmf_fws_enq(fws, BRCMF_FWS_SKBSTATE_DELAYED, fifo, skb);
 		brcmf_fws_schedule_deq(fws);
 	} else {
-		bphy_err(drvr, "drop skb: no hanger slot\n");
-		brcmf_txfinalize(ifp, skb, false);
+		bphy_err(drvr, "no hanger slot available\n");
 		rc = -ENOMEM;
 	}
 	brcmf_fws_unlock(fws);
-- 
2.20.1

[PATCH AUTOSEL 5.6 113/149] brcmfmac: fix the incorrect return value in brcmf_inform_single_bss().

[Sasha Levin]

From: Raveendran Somu <raveendran.somu@cypress.com>

[ Upstream commit bd9944918ceb28ede97f715d209e220db5e92c09 ]

The function brcmf_inform_single_bss returns the value as success,
even when the length exceeds the maximum value.
The fix is to send appropriate code on this error.
This issue is observed when Cypress test group reported random fmac
crashes when running their tests and the path was identified from the
crash logs. With this fix the random failure issue in Cypress test group
was resolved.

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Raveendran Somu <raveendran.somu@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585124429-97371-4-git-send-email-chi-hsien.lin@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index a2328d3eee036..2ba165330038e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -2953,7 +2953,7 @@ static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg,
 
 	if (le32_to_cpu(bi->length) > WL_BSS_INFO_MAX) {
 		bphy_err(drvr, "Bss info is larger than buffer. Discarding\n");
-		return 0;
+		return -EINVAL;
 	}
 
 	if (!bi->ctl_ch) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 114/149] xfrm: add prep for esp beet mode offload

[Sasha Levin]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 308491755f36c461ee67290af159fdba6be0169d ]

Like __xfrm_transport/mode_tunnel_prep(), this patch is to add
__xfrm_mode_beet_prep() to fix the transport_header for gso
segments, and reset skb mac_len, and pull skb data to the
proto inside esp.

This patch also fixes a panic, reported by ltp:

  # modprobe esp4_offload
  # runltp -f net_stress.ipsec_tcp

  [ 2452.780511] kernel BUG at net/core/skbuff.c:109!
  [ 2452.799851] Call Trace:
  [ 2452.800298]  <IRQ>
  [ 2452.800705]  skb_push.cold.98+0x14/0x20
  [ 2452.801396]  esp_xmit+0x17b/0x270 [esp4_offload]
  [ 2452.802799]  validate_xmit_xfrm+0x22f/0x2e0
  [ 2452.804285]  __dev_queue_xmit+0x589/0x910
  [ 2452.806264]  __neigh_update+0x3d7/0xa50
  [ 2452.806958]  arp_process+0x259/0x810
  [ 2452.807589]  arp_rcv+0x18a/0x1c

It was caused by the skb going to esp_xmit with a wrong transport
header.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_device.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_device.c b/net/xfrm/xfrm_device.c
index e2db468cf50ee..6cc7f7f1dd68c 100644
--- a/net/xfrm/xfrm_device.c
+++ b/net/xfrm/xfrm_device.c
@@ -46,6 +46,25 @@ static void __xfrm_mode_tunnel_prep(struct xfrm_state *x, struct sk_buff *skb,
 	pskb_pull(skb, skb->mac_len + x->props.header_len);
 }
 
+static void __xfrm_mode_beet_prep(struct xfrm_state *x, struct sk_buff *skb,
+				  unsigned int hsize)
+{
+	struct xfrm_offload *xo = xfrm_offload(skb);
+	int phlen = 0;
+
+	if (xo->flags & XFRM_GSO_SEGMENT)
+		skb->transport_header = skb->network_header + hsize;
+
+	skb_reset_mac_len(skb);
+	if (x->sel.family != AF_INET6) {
+		phlen = IPV4_BEET_PHMAXLEN;
+		if (x->outer_mode.family == AF_INET6)
+			phlen += sizeof(struct ipv6hdr) - sizeof(struct iphdr);
+	}
+
+	pskb_pull(skb, skb->mac_len + hsize + (x->props.header_len - phlen));
+}
+
 /* Adjust pointers into the packet when IPsec is done at layer2 */
 static void xfrm_outer_mode_prep(struct xfrm_state *x, struct sk_buff *skb)
 {
@@ -66,9 +85,16 @@ static void xfrm_outer_mode_prep(struct xfrm_state *x, struct sk_buff *skb)
 			return __xfrm_transport_prep(x, skb,
 						     sizeof(struct ipv6hdr));
 		break;
+	case XFRM_MODE_BEET:
+		if (x->outer_mode.family == AF_INET)
+			return __xfrm_mode_beet_prep(x, skb,
+						     sizeof(struct iphdr));
+		if (x->outer_mode.family == AF_INET6)
+			return __xfrm_mode_beet_prep(x, skb,
+						     sizeof(struct ipv6hdr));
+		break;
 	case XFRM_MODE_ROUTEOPTIMIZATION:
 	case XFRM_MODE_IN_TRIGGER:
-	case XFRM_MODE_BEET:
 		break;
 	}
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 115/149] xfs: prohibit fs freezing when using empty transactions

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit 27fb5a72f50aa770dd38b0478c07acacef97e3e7 ]

I noticed that fsfreeze can take a very long time to freeze an XFS if
there happens to be a GETFSMAP caller running in the background.  I also
happened to notice the following in dmesg:

------------[ cut here ]------------
WARNING: CPU: 2 PID: 43492 at fs/xfs/xfs_super.c:853 xfs_quiesce_attr+0x83/0x90 [xfs]
Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 ip_set_hash_ip ip_set_hash_net xt_tcpudp xt_set ip_set_hash_mac ip_set nfnetlink ip6table_filter ip6_tables bfq iptable_filter sch_fq_codel ip_tables x_tables nfsv4 af_packet [last unloaded: xfs]
CPU: 2 PID: 43492 Comm: xfs_io Not tainted 5.6.0-rc4-djw #rc4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:xfs_quiesce_attr+0x83/0x90 [xfs]
Code: 7c 07 00 00 85 c0 75 22 48 89 df 5b e9 96 c1 00 00 48 c7 c6 b0 2d 38 a0 48 89 df e8 57 64 ff ff 8b 83 7c 07 00 00 85 c0 74 de <0f> 0b 48 89 df 5b e9 72 c1 00 00 66 90 0f 1f 44 00 00 41 55 41 54
RSP: 0018:ffffc900030f3e28 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff88802ac54000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff81e4a6f0 RDI: 00000000ffffffff
RBP: ffff88807859f070 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000010 R12: 0000000000000000
R13: ffff88807859f388 R14: ffff88807859f4b8 R15: ffff88807859f5e8
FS:  00007fad1c6c0fc0(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0c7d237000 CR3: 0000000077f01003 CR4: 00000000001606a0
Call Trace:
 xfs_fs_freeze+0x25/0x40 [xfs]
 freeze_super+0xc8/0x180
 do_vfs_ioctl+0x70b/0x750
 ? __fget_files+0x135/0x210
 ksys_ioctl+0x3a/0xb0
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x50/0x1a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

These two things appear to be related.  The assertion trips when another
thread initiates a fsmap request (which uses an empty transaction) after
the freezer waited for m_active_trans to hit zero but before the the
freezer executes the WARN_ON just prior to calling xfs_log_quiesce.

The lengthy delays in freezing happen because the freezer calls
xfs_wait_buftarg to clean out the buffer lru list.  Meanwhile, the
GETFSMAP caller is continuing to grab and release buffers, which means
that it can take a very long time for the buffer lru list to empty out.

We fix both of these races by calling sb_start_write to obtain freeze
protection while using empty transactions for GETFSMAP and for metadata
scrubbing.  The other two users occur during mount, during which time we
cannot fs freeze.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/scrub/scrub.c | 9 +++++++++
 fs/xfs/xfs_fsmap.c   | 9 +++++++++
 fs/xfs/xfs_trans.c   | 5 +++++
 3 files changed, 23 insertions(+)

diff --git a/fs/xfs/scrub/scrub.c b/fs/xfs/scrub/scrub.c
index f1775bb193135..8ebf35b115ce2 100644
--- a/fs/xfs/scrub/scrub.c
+++ b/fs/xfs/scrub/scrub.c
@@ -168,6 +168,7 @@ xchk_teardown(
 			xfs_irele(sc->ip);
 		sc->ip = NULL;
 	}
+	sb_end_write(sc->mp->m_super);
 	if (sc->flags & XCHK_REAPING_DISABLED)
 		xchk_start_reaping(sc);
 	if (sc->flags & XCHK_HAS_QUOTAOFFLOCK) {
@@ -490,6 +491,14 @@ xfs_scrub_metadata(
 	sc.ops = &meta_scrub_ops[sm->sm_type];
 	sc.sick_mask = xchk_health_mask_for_scrub_type(sm->sm_type);
 retry_op:
+	/*
+	 * If freeze runs concurrently with a scrub, the freeze can be delayed
+	 * indefinitely as we walk the filesystem and iterate over metadata
+	 * buffers.  Freeze quiesces the log (which waits for the buffer LRU to
+	 * be emptied) and that won't happen while checking is running.
+	 */
+	sb_start_write(mp->m_super);
+
 	/* Set up for the operation. */
 	error = sc.ops->setup(&sc, ip);
 	if (error)
diff --git a/fs/xfs/xfs_fsmap.c b/fs/xfs/xfs_fsmap.c
index 918456ca29e16..442fd4311f180 100644
--- a/fs/xfs/xfs_fsmap.c
+++ b/fs/xfs/xfs_fsmap.c
@@ -896,6 +896,14 @@ xfs_getfsmap(
 	info.format_arg = arg;
 	info.head = head;
 
+	/*
+	 * If fsmap runs concurrently with a scrub, the freeze can be delayed
+	 * indefinitely as we walk the rmapbt and iterate over metadata
+	 * buffers.  Freeze quiesces the log (which waits for the buffer LRU to
+	 * be emptied) and that won't happen while we're reading buffers.
+	 */
+	sb_start_write(mp->m_super);
+
 	/* For each device we support... */
 	for (i = 0; i < XFS_GETFSMAP_DEVS; i++) {
 		/* Is this device within the range the user asked for? */
@@ -935,6 +943,7 @@ xfs_getfsmap(
 
 	if (tp)
 		xfs_trans_cancel(tp);
+	sb_end_write(mp->m_super);
 	head->fmh_oflags = FMH_OF_DEV_T;
 	return error;
 }
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 3b208f9a865cb..a65dc227e40d0 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -306,6 +306,11 @@ xfs_trans_alloc(
  *
  * Note the zero-length reservation; this transaction MUST be cancelled
  * without any dirty data.
+ *
+ * Callers should obtain freeze protection to avoid two conflicts with fs
+ * freezing: (1) having active transactions trip the m_active_trans ASSERTs;
+ * and (2) grabbing buffers at the same time that freeze is trying to drain
+ * the buffer LRU list.
  */
 int
 xfs_trans_alloc_empty(
-- 
2.20.1

[PATCH AUTOSEL 5.6 116/149] RDMA/cm: Update num_paths in cma_resolve_iboe_route error flow

[Sasha Levin]

From: Avihai Horon <avihaih@mellanox.com>

[ Upstream commit 987914ab841e2ec281a35b54348ab109b4c0bb4e ]

After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.

This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.

The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
  CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
  Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
  45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
  14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
  RSP: 0018:ffff88006586f980 EFLAGS: 00010207
  RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475
  RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c
  RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72
  R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30
  R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200
  FS: 00000000016fc880(0000) GS:ffff88006d000000(0000)
  knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  ? ib_copy_path_rec_from_user+0xcc0/0xcc0
  ? __mutex_unlock_slowpath+0xfc/0x670
  ? wait_for_completion+0x3b0/0x3b0
  ? ucma_query_route+0x818/0xc60
  ucma_query_route+0x818/0xc60
  ? ucma_listen+0x1b0/0x1b0
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  ? ucma_listen+0x1b0/0x1b0
  ? ucma_write+0x292/0x460
  ucma_write+0x292/0x460
  ? ucma_close_id+0x60/0x60
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  __vfs_write+0xf7/0x620
  ? ucma_close_id+0x60/0x60
  ? kernel_read+0x110/0x110
  ? time_hardirqs_on+0x19/0x580
  ? lock_acquire+0x18b/0x3a0
  ? finish_task_switch+0xf3/0x5d0
  ? _raw_spin_unlock_irq+0x29/0x40
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1be/0x5d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? security_file_permission+0x172/0x1e0
  vfs_write+0x192/0x460
  ksys_write+0xc6/0x1a0
  ? __ia32_sys_read+0xb0/0xb0
  ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
  ? do_syscall_64+0x1d/0x470
  do_syscall_64+0x9e/0x470
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.org
Signed-off-by: Avihai Horon <avihaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 2dec3a02ab9fe..2121897681ba4 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2968,6 +2968,7 @@ static int cma_resolve_iboe_route(struct rdma_id_private *id_priv)
 err2:
 	kfree(route->path_rec);
 	route->path_rec = NULL;
+	route->num_paths = 0;
 err1:
 	kfree(work);
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.6 117/149] netfilter: nf_tables: silence a RCU-list warning in nft_table_lookup()

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 0a6a9515fe390976cd762c52d8d4f446d7a14285 ]

It is safe to traverse &net->nft.tables with &net->nft.commit_mutex
held using list_for_each_entry_rcu(). Silence the PROVE_RCU_LIST false
positive,

WARNING: suspicious RCU usage
net/netfilter/nf_tables_api.c:523 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by iptables/1384:
 #0: ffffffff9745c4a8 (&net->nft.commit_mutex){+.+.}, at: nf_tables_valid_genid+0x25/0x60 [nf_tables]

Call Trace:
 dump_stack+0xa1/0xea
 lockdep_rcu_suspicious+0x103/0x10d
 nft_table_lookup.part.0+0x116/0x120 [nf_tables]
 nf_tables_newtable+0x12c/0x7d0 [nf_tables]
 nfnetlink_rcv_batch+0x559/0x1190 [nfnetlink]
 nfnetlink_rcv+0x1da/0x210 [nfnetlink]
 netlink_unicast+0x306/0x460
 netlink_sendmsg+0x44b/0x770
 ____sys_sendmsg+0x46b/0x4a0
 ___sys_sendmsg+0x138/0x1a0
 __sys_sendmsg+0xb6/0x130
 __x64_sys_sendmsg+0x48/0x50
 do_syscall_64+0x69/0xf4
 entry_SYSCALL_64_after_hwframe+0x49/0xb3

Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index d11f1a74d43c9..f09d15e7fe2b2 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -520,7 +520,8 @@ static struct nft_table *nft_table_lookup(const struct net *net,
 	if (nla == NULL)
 		return ERR_PTR(-EINVAL);
 
-	list_for_each_entry_rcu(table, &net->nft.tables, list) {
+	list_for_each_entry_rcu(table, &net->nft.tables, list,
+				lockdep_is_held(&net->nft.commit_mutex)) {
 		if (!nla_strcmp(nla, table->name) &&
 		    table->family == family &&
 		    nft_active_genmask(table, genmask))
-- 
2.20.1

[PATCH AUTOSEL 5.6 118/149] crypto/chtls: Fix chtls crash in connection cleanup

[Sasha Levin]

From: Rohit Maheshwari <rohitm@chelsio.com>

[ Upstream commit 3a0a978389234995b64a8b8fbe343115bffb1551 ]

There is a possibility that cdev is removed before CPL_ABORT_REQ_RSS
is fully processed, so it's better to save it in skb.

Added checks in handling the flow correctly, which suggests connection reset
request is sent to HW, wait for HW to respond.

Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/chelsio/chtls/chtls_cm.c | 29 +++++++++++++++++++++----
 1 file changed, 25 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/chelsio/chtls/chtls_cm.c b/drivers/crypto/chelsio/chtls/chtls_cm.c
index 9b2745ad9e380..d5720a8594435 100644
--- a/drivers/crypto/chelsio/chtls/chtls_cm.c
+++ b/drivers/crypto/chelsio/chtls/chtls_cm.c
@@ -445,6 +445,7 @@ void chtls_destroy_sock(struct sock *sk)
 	chtls_purge_write_queue(sk);
 	free_tls_keyid(sk);
 	kref_put(&csk->kref, chtls_sock_release);
+	csk->cdev = NULL;
 	sk->sk_prot = &tcp_prot;
 	sk->sk_prot->destroy(sk);
 }
@@ -759,8 +760,10 @@ static void chtls_release_resources(struct sock *sk)
 		csk->l2t_entry = NULL;
 	}
 
-	cxgb4_remove_tid(tids, csk->port_id, tid, sk->sk_family);
-	sock_put(sk);
+	if (sk->sk_state != TCP_SYN_SENT) {
+		cxgb4_remove_tid(tids, csk->port_id, tid, sk->sk_family);
+		sock_put(sk);
+	}
 }
 
 static void chtls_conn_done(struct sock *sk)
@@ -1716,6 +1719,9 @@ static void chtls_peer_close(struct sock *sk, struct sk_buff *skb)
 {
 	struct chtls_sock *csk = rcu_dereference_sk_user_data(sk);
 
+	if (csk_flag_nochk(csk, CSK_ABORT_RPL_PENDING))
+		goto out;
+
 	sk->sk_shutdown |= RCV_SHUTDOWN;
 	sock_set_flag(sk, SOCK_DONE);
 
@@ -1748,6 +1754,7 @@ static void chtls_peer_close(struct sock *sk, struct sk_buff *skb)
 		else
 			sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
 	}
+out:
 	kfree_skb(skb);
 }
 
@@ -1758,6 +1765,10 @@ static void chtls_close_con_rpl(struct sock *sk, struct sk_buff *skb)
 	struct tcp_sock *tp;
 
 	csk = rcu_dereference_sk_user_data(sk);
+
+	if (csk_flag_nochk(csk, CSK_ABORT_RPL_PENDING))
+		goto out;
+
 	tp = tcp_sk(sk);
 
 	tp->snd_una = ntohl(rpl->snd_nxt) - 1;  /* exclude FIN */
@@ -1787,6 +1798,7 @@ static void chtls_close_con_rpl(struct sock *sk, struct sk_buff *skb)
 	default:
 		pr_info("close_con_rpl in bad state %d\n", sk->sk_state);
 	}
+out:
 	kfree_skb(skb);
 }
 
@@ -1896,6 +1908,7 @@ static void chtls_send_abort_rpl(struct sock *sk, struct sk_buff *skb,
 	}
 
 	set_abort_rpl_wr(reply_skb, tid, status);
+	kfree_skb(skb);
 	set_wr_txq(reply_skb, CPL_PRIORITY_DATA, queue);
 	if (csk_conn_inline(csk)) {
 		struct l2t_entry *e = csk->l2t_entry;
@@ -1906,7 +1919,6 @@ static void chtls_send_abort_rpl(struct sock *sk, struct sk_buff *skb,
 		}
 	}
 	cxgb4_ofld_send(cdev->lldi->ports[0], reply_skb);
-	kfree_skb(skb);
 }
 
 /*
@@ -2008,7 +2020,8 @@ static void chtls_abort_req_rss(struct sock *sk, struct sk_buff *skb)
 		chtls_conn_done(sk);
 	}
 
-	chtls_send_abort_rpl(sk, skb, csk->cdev, rst_status, queue);
+	chtls_send_abort_rpl(sk, skb, BLOG_SKB_CB(skb)->cdev,
+			     rst_status, queue);
 }
 
 static void chtls_abort_rpl_rss(struct sock *sk, struct sk_buff *skb)
@@ -2042,6 +2055,7 @@ static int chtls_conn_cpl(struct chtls_dev *cdev, struct sk_buff *skb)
 	struct cpl_peer_close *req = cplhdr(skb) + RSS_HDR;
 	void (*fn)(struct sock *sk, struct sk_buff *skb);
 	unsigned int hwtid = GET_TID(req);
+	struct chtls_sock *csk;
 	struct sock *sk;
 	u8 opcode;
 
@@ -2051,6 +2065,8 @@ static int chtls_conn_cpl(struct chtls_dev *cdev, struct sk_buff *skb)
 	if (!sk)
 		goto rel_skb;
 
+	csk = sk->sk_user_data;
+
 	switch (opcode) {
 	case CPL_PEER_CLOSE:
 		fn = chtls_peer_close;
@@ -2059,6 +2075,11 @@ static int chtls_conn_cpl(struct chtls_dev *cdev, struct sk_buff *skb)
 		fn = chtls_close_con_rpl;
 		break;
 	case CPL_ABORT_REQ_RSS:
+		/*
+		 * Save the offload device in the skb, we may process this
+		 * message after the socket has closed.
+		 */
+		BLOG_SKB_CB(skb)->cdev = csk->cdev;
 		fn = chtls_abort_req_rss;
 		break;
 	case CPL_ABORT_RPL_RSS:
-- 
2.20.1

[PATCH AUTOSEL 5.6 119/149] ASoC: stm32: spdifrx: fix regmap status check

[Sasha Levin]

From: Olivier Moysan <olivier.moysan@st.com>

[ Upstream commit a168dae5ea14283e8992d5282237bb0d6a3e1c06 ]

Release resources when exiting on error.

Fixes: 1a5c0b28fc56 ("ASoC: stm32: spdifrx: manage identification registers")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200318144125.9163-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/stm/stm32_spdifrx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/stm/stm32_spdifrx.c b/sound/soc/stm/stm32_spdifrx.c
index 3769d9ce5dbef..e6e75897cce83 100644
--- a/sound/soc/stm/stm32_spdifrx.c
+++ b/sound/soc/stm/stm32_spdifrx.c
@@ -1009,6 +1009,8 @@ static int stm32_spdifrx_probe(struct platform_device *pdev)
 
 	if (idr == SPDIFRX_IPIDR_NUMBER) {
 		ret = regmap_read(spdifrx->regmap, STM32_SPDIFRX_VERR, &ver);
+		if (ret)
+			goto error;
 
 		dev_dbg(&pdev->dev, "SPDIFRX version: %lu.%lu registered\n",
 			FIELD_GET(SPDIFRX_VERR_MAJ_MASK, ver),
-- 
2.20.1

[PATCH AUTOSEL 5.6 120/149] ASoC: Intel: Skylake: Enable codec wakeup during chip init

[Sasha Levin]

From: Cezary Rojewski <cezary.rojewski@intel.com>

[ Upstream commit e603f11d5df8997d104ab405ff27640b90baffaa ]

Follow the recommendation set by hda_intel.c and enable HDMI/DP codec
wakeup during bus initialization procedure. Disable wakeup once init
completes.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/skylake/skl.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index f755ca2484cff..0f3f291c223e2 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -130,6 +130,7 @@ static int skl_init_chip(struct hdac_bus *bus, bool full_reset)
 	struct hdac_ext_link *hlink;
 	int ret;
 
+	snd_hdac_set_codec_wakeup(bus, true);
 	skl_enable_miscbdcge(bus->dev, false);
 	ret = snd_hdac_bus_init_chip(bus, full_reset);
 
@@ -138,6 +139,7 @@ static int skl_init_chip(struct hdac_bus *bus, bool full_reset)
 		writel(0, hlink->ml_addr + AZX_REG_ML_LOSIDV);
 
 	skl_enable_miscbdcge(bus->dev, true);
+	snd_hdac_set_codec_wakeup(bus, false);
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 121/149] scsi: qla2xxx: Return appropriate failure through BSG Interface

[Sasha Levin]

From: Michael Hernandez <mhernandez@marvell.com>

[ Upstream commit 1b81e7f3019d632a707e07927e946ffbbc102910 ]

This patch ensures flash updates API calls return possible failure
status through BSG interface to the application.

Link: https://lore.kernel.org/r/20200226224022.24518-7-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Michael Hernandez <mhernandez@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_bsg.c |  9 +++++++--
 drivers/scsi/qla2xxx/qla_sup.c | 13 ++++++++-----
 2 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index d7169e43f5e18..d6f814aa94aba 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -1506,10 +1506,15 @@ qla2x00_update_optrom(struct bsg_job *bsg_job)
 	    bsg_job->request_payload.sg_cnt, ha->optrom_buffer,
 	    ha->optrom_region_size);
 
-	ha->isp_ops->write_optrom(vha, ha->optrom_buffer,
+	rval = ha->isp_ops->write_optrom(vha, ha->optrom_buffer,
 	    ha->optrom_region_start, ha->optrom_region_size);
 
-	bsg_reply->result = DID_OK;
+	if (rval) {
+		bsg_reply->result = -EINVAL;
+		rval = -EINVAL;
+	} else {
+		bsg_reply->result = DID_OK;
+	}
 	vfree(ha->optrom_buffer);
 	ha->optrom_buffer = NULL;
 	ha->optrom_state = QLA_SWAITING;
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 76a38bf86cbc3..3da79ee1d88e4 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -2683,7 +2683,7 @@ qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 	uint32_t sec_mask, rest_addr, fdata;
 	void *optrom = NULL;
 	dma_addr_t optrom_dma;
-	int rval;
+	int rval, ret;
 	struct secure_flash_update_block *sfub;
 	dma_addr_t sfub_dma;
 	uint32_t offset = faddr << 2;
@@ -2939,11 +2939,12 @@ qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 write_protect:
 	ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
 	    "Protect flash...\n");
-	rval = qla24xx_protect_flash(vha);
-	if (rval) {
+	ret = qla24xx_protect_flash(vha);
+	if (ret) {
 		qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_UNLOCK);
 		ql_log(ql_log_warn, vha, 0x7099,
 		    "Failed protect flash\n");
+		rval = QLA_COMMAND_ERROR;
 	}
 
 	if (reset_to_rom == true) {
@@ -2951,10 +2952,12 @@ qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
 		set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 		qla2xxx_wake_dpc(vha);
 
-		rval = qla2x00_wait_for_hba_online(vha);
-		if (rval != QLA_SUCCESS)
+		ret = qla2x00_wait_for_hba_online(vha);
+		if (ret != QLA_SUCCESS) {
 			ql_log(ql_log_warn, vha, 0xffff,
 			    "Adapter did not come out of reset\n");
+			rval = QLA_COMMAND_ERROR;
+		}
 	}
 
 done:
-- 
2.20.1

[PATCH AUTOSEL 5.6 122/149] dmaengine: idxd: check return result from check_vma() in cdev

[Sasha Levin]

From: Dave Jiang <dave.jiang@intel.com>

[ Upstream commit b391554c61cb353c279523a706734b090aaf9000 ]

The returned result from the check_vma() function in the cdev ->mmap() call
needs to be handled. Add the check and returning error.

Fixes: 42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland")
Reported-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/158264926659.9387.14325163515683047959.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/idxd/cdev.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/idxd/cdev.c b/drivers/dma/idxd/cdev.c
index 989b7a25ca614..677ccbe6261f4 100644
--- a/drivers/dma/idxd/cdev.c
+++ b/drivers/dma/idxd/cdev.c
@@ -139,6 +139,8 @@ static int idxd_cdev_mmap(struct file *filp, struct vm_area_struct *vma)
 
 	dev_dbg(&pdev->dev, "%s called\n", __func__);
 	rc = check_vma(wq, vma, __func__);
+	if (rc < 0)
+		return rc;
 
 	vma->vm_flags |= VM_DONTCOPY;
 	pfn = (base + idxd_get_wq_portal_full_offset(wq->id,
-- 
2.20.1

[PATCH AUTOSEL 5.6 123/149] scsi: qla2xxx: fix FW resource count values

[Sasha Levin]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit ce1ee122e0f048fc67c1259489f0802a28049bfd ]

This patch fixes issue where current and original exchanges count
were swapped for intiator and targets.

Also fix IOCB count for current and original which were swapped.

Link: https://lore.kernel.org/r/20200226224022.24518-9-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_dfs.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index 0a6fb359f4d5e..e62b2115235e1 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -134,11 +134,11 @@ qla_dfs_fw_resource_cnt_show(struct seq_file *s, void *unused)
 	} else {
 		seq_puts(s, "FW Resource count\n\n");
 		seq_printf(s, "Original TGT exchg count[%d]\n", mb[1]);
-		seq_printf(s, "current TGT exchg count[%d]\n", mb[2]);
-		seq_printf(s, "original Initiator Exchange count[%d]\n", mb[3]);
-		seq_printf(s, "Current Initiator Exchange count[%d]\n", mb[6]);
-		seq_printf(s, "Original IOCB count[%d]\n", mb[7]);
-		seq_printf(s, "Current IOCB count[%d]\n", mb[10]);
+		seq_printf(s, "Current TGT exchg count[%d]\n", mb[2]);
+		seq_printf(s, "Current Initiator Exchange count[%d]\n", mb[3]);
+		seq_printf(s, "Original Initiator Exchange count[%d]\n", mb[6]);
+		seq_printf(s, "Current IOCB count[%d]\n", mb[7]);
+		seq_printf(s, "Original IOCB count[%d]\n", mb[10]);
 		seq_printf(s, "MAX VP count[%d]\n", mb[11]);
 		seq_printf(s, "MAX FCF count[%d]\n", mb[12]);
 		seq_printf(s, "Current free pageable XCB buffer cnt[%d]\n",
@@ -149,7 +149,6 @@ qla_dfs_fw_resource_cnt_show(struct seq_file *s, void *unused)
 		    mb[22]);
 		seq_printf(s, "Original Target fast XCB buffer cnt[%d]\n",
 		    mb[23]);
-
 	}
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 124/149] of: of_reserved_mem: Increase limit on number of reserved regions

[Sasha Levin]

From: Patrick Daly <pdaly@codeaurora.org>

[ Upstream commit 632c99084052aef1c9dcfe43d2720306026d6d21 ]

Certain SoCs need to support a large amount of reserved memory
regions. For example, Qualcomm's SM8150 SoC requires that 20
regions of memory be reserved for a variety of reasons (e.g.
loading a peripheral subsystem's firmware image into a
particular space).

When adding more reserved memory regions to cater to different
usecases, the remaining number of reserved memory regions--12
to be exact--becomes too small. Thus, double the existing
limit of reserved memory regions.

Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/of_reserved_mem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index 6bd610ee2cd73..1a84bc0d5fa80 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -22,7 +22,7 @@
 #include <linux/slab.h>
 #include <linux/memblock.h>
 
-#define MAX_RESERVED_REGIONS	32
+#define MAX_RESERVED_REGIONS	64
 static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
 static int reserved_mem_count;
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 125/149] dmaengine: stm32-dma: use reset controller only at probe time

[Sasha Levin]

From: Etienne Carriere <etienne.carriere@st.com>

[ Upstream commit 8cf1e0fc50fcc25021567bb2755580504c57c83a ]

Remove reset controller reference from device instance since it is
used only at probe time.

Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20200129153628.29329-3-amelie.delaunay@st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/stm32-dma.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 5989b08935211..ff34a10fc8d89 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -207,7 +207,6 @@ struct stm32_dma_device {
 	struct dma_device ddev;
 	void __iomem *base;
 	struct clk *clk;
-	struct reset_control *rst;
 	bool mem2mem;
 	struct stm32_dma_chan chan[STM32_DMA_MAX_CHANNELS];
 };
@@ -1275,6 +1274,7 @@ static int stm32_dma_probe(struct platform_device *pdev)
 	struct dma_device *dd;
 	const struct of_device_id *match;
 	struct resource *res;
+	struct reset_control *rst;
 	int i, ret;
 
 	match = of_match_device(stm32_dma_of_match, &pdev->dev);
@@ -1309,11 +1309,11 @@ static int stm32_dma_probe(struct platform_device *pdev)
 	dmadev->mem2mem = of_property_read_bool(pdev->dev.of_node,
 						"st,mem2mem");
 
-	dmadev->rst = devm_reset_control_get(&pdev->dev, NULL);
-	if (!IS_ERR(dmadev->rst)) {
-		reset_control_assert(dmadev->rst);
+	rst = devm_reset_control_get(&pdev->dev, NULL);
+	if (!IS_ERR(rst)) {
+		reset_control_assert(rst);
 		udelay(2);
-		reset_control_deassert(dmadev->rst);
+		reset_control_deassert(rst);
 	}
 
 	dma_cap_set(DMA_SLAVE, dd->cap_mask);
-- 
2.20.1

[PATCH AUTOSEL 5.6 126/149] scsi: qla2xxx: Add fixes for mailbox command

[Sasha Levin]

From: Himanshu Madhani <hmadhani@marvell.com>

[ Upstream commit 345f574dac85276d1471492c6e90c57e3f90a4f3 ]

This patch fixes:

- qla2x00_issue_iocb_timeout will now return if chip is down

- only check for sp->qpair in abort handling

Link: https://lore.kernel.org/r/20200212214436.25532-24-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_mbx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 9e09964f5c0e4..f0846ce0c4da4 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1405,6 +1405,9 @@ qla2x00_issue_iocb_timeout(scsi_qla_host_t *vha, void *buffer,
 	mbx_cmd_t	mc;
 	mbx_cmd_t	*mcp = &mc;
 
+	if (qla2x00_chip_is_down(vha))
+		return QLA_INVALID_COMMAND;
+
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1038,
 	    "Entered %s.\n", __func__);
 
@@ -1475,7 +1478,7 @@ qla2x00_abort_command(srb_t *sp)
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x103b,
 	    "Entered %s.\n", __func__);
 
-	if (vha->flags.qpairs_available && sp->qpair)
+	if (sp->qpair)
 		req = sp->qpair->req;
 	else
 		req = vha->req;
-- 
2.20.1

[PATCH AUTOSEL 5.6 127/149] scsi: qla2xxx: Fix control flags for login/logout IOCB

[Sasha Levin]

From: Himanshu Madhani <hmadhani@marvell.com>

[ Upstream commit 419ae5fe73e50084fa794934fb62fab34f564b7c ]

This patch fixes control flag options for login/logout IOCB.

Link: https://lore.kernel.org/r/20200212214436.25532-23-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_iocb.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 47bf60a9490a0..86881d68af19b 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2362,6 +2362,8 @@ qla24xx_login_iocb(srb_t *sp, struct logio_entry_24xx *logio)
 	struct srb_iocb *lio = &sp->u.iocb_cmd;
 
 	logio->entry_type = LOGINOUT_PORT_IOCB_TYPE;
+	logio->control_flags = cpu_to_le16(LCF_COMMAND_PLOGI);
+
 	if (lio->u.logio.flags & SRB_LOGIN_PRLI_ONLY) {
 		logio->control_flags = cpu_to_le16(LCF_COMMAND_PRLI);
 	} else {
@@ -2939,7 +2941,6 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 	sp->fcport = fcport;
 
 	elsio->timeout = qla2x00_els_dcmd2_iocb_timeout;
-	init_completion(&elsio->u.els_plogi.comp);
 	if (wait)
 		sp->flags = SRB_WAKEUP_ON_COMP;
 
@@ -2949,7 +2950,7 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 	elsio->u.els_plogi.tx_size = elsio->u.els_plogi.rx_size = DMA_POOL_SIZE;
 
 	ptr = elsio->u.els_plogi.els_plogi_pyld =
-	    dma_alloc_coherent(&ha->pdev->dev, DMA_POOL_SIZE,
+	    dma_alloc_coherent(&ha->pdev->dev, elsio->u.els_plogi.tx_size,
 		&elsio->u.els_plogi.els_plogi_pyld_dma, GFP_KERNEL);
 
 	if (!elsio->u.els_plogi.els_plogi_pyld) {
@@ -2958,7 +2959,7 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 	}
 
 	resp_ptr = elsio->u.els_plogi.els_resp_pyld =
-	    dma_alloc_coherent(&ha->pdev->dev, DMA_POOL_SIZE,
+	    dma_alloc_coherent(&ha->pdev->dev, elsio->u.els_plogi.rx_size,
 		&elsio->u.els_plogi.els_resp_pyld_dma, GFP_KERNEL);
 
 	if (!elsio->u.els_plogi.els_resp_pyld) {
@@ -2982,6 +2983,7 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 	    (uint8_t *)elsio->u.els_plogi.els_plogi_pyld,
 	    sizeof(*elsio->u.els_plogi.els_plogi_pyld));
 
+	init_completion(&elsio->u.els_plogi.comp);
 	rval = qla2x00_start_sp(sp);
 	if (rval != QLA_SUCCESS) {
 		rval = QLA_FUNCTION_FAILED;
-- 
2.20.1

[PATCH AUTOSEL 5.6 128/149] scsi: qla2xxx: Fix qla2x00_echo_test() based on ISP type

[Sasha Levin]

From: Joe Carnuccio <joe.carnuccio@cavium.com>

[ Upstream commit 83cfd3dc002fc730387a1ec5fa0d4097cc31ee9f ]

Ths patch fixes MBX in-direction for setting right bits for
qla2x00_echo_test()

Link: https://lore.kernel.org/r/20200212214436.25532-19-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_mbx.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index f0846ce0c4da4..0e8426e1e1149 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -5173,10 +5173,11 @@ qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq,
 		mcp->out_mb |= MBX_2;
 
 	mcp->in_mb = MBX_0;
-	if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) ||
-	    IS_CNA_CAPABLE(ha) || IS_QLA2031(ha))
+	if (IS_CNA_CAPABLE(ha) || IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) ||
+	    IS_QLA2031(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
 		mcp->in_mb |= MBX_1;
-	if (IS_CNA_CAPABLE(ha) || IS_QLA2031(ha))
+	if (IS_CNA_CAPABLE(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha) ||
+	    IS_QLA28XX(ha))
 		mcp->in_mb |= MBX_3;
 
 	mcp->tov = MBX_TOV_SECONDS;
-- 
2.20.1

[PATCH AUTOSEL 5.6 129/149] scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic

[Sasha Levin]

From: Can Guo <cang@codeaurora.org>

[ Upstream commit c63d6099a7959ecc919b2549dc6b71f53521f819 ]

The async version of ufshcd_hold(async == true), which is only called in
queuecommand path as for now, is expected to work in atomic context, thus
it should not sleep or schedule out. When it runs into the condition that
clocks are ON but link is still in hibern8 state, it should bail out
without flushing the clock ungate work.

Fixes: f2a785ac2312 ("scsi: ufshcd: Fix race between clk scaling and ungate work")
Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2d705694636c2..682f85f800d0f 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1518,6 +1518,11 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 		 */
 		if (ufshcd_can_hibern8_during_gating(hba) &&
 		    ufshcd_is_link_hibern8(hba)) {
+			if (async) {
+				rc = -EAGAIN;
+				hba->clk_gating.active_reqs--;
+				break;
+			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
 			flush_work(&hba->clk_gating.ungate_work);
 			spin_lock_irqsave(hba->host->host_lock, flags);
-- 
2.20.1

[PATCH AUTOSEL 5.6 130/149] dmaengine: sun4i: use 'linear_mode' in sun4i_dma_prep_dma_cyclic

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 6ebb827f7aad504ea438d0d2903293bd6f904463 ]

drivers/dma/sun4i-dma.c: In function sun4i_dma_prep_dma_cyclic:
drivers/dma/sun4i-dma.c:672:24: warning:
 variable linear_mode set but not used [-Wunused-but-set-variable]

commit ffc079a4accc ("dmaengine: sun4i: Add support for cyclic requests with dedicated DMA")
involved this, explicitly using the value makes the code more readable.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200207024445.44600-1-yuehaibing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/sun4i-dma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c
index bbc2bda3b902f..e87fc7c460dd4 100644
--- a/drivers/dma/sun4i-dma.c
+++ b/drivers/dma/sun4i-dma.c
@@ -698,10 +698,12 @@ sun4i_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf, size_t len,
 		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(vchan->endpoint) |
 			    SUN4I_DMA_CFG_DST_ADDR_MODE(io_mode) |
 			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(ram_type);
+			    SUN4I_DMA_CFG_SRC_ADDR_MODE(linear_mode);
 	} else {
 		src = sconfig->src_addr;
 		dest = buf;
 		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(ram_type) |
+			    SUN4I_DMA_CFG_DST_ADDR_MODE(linear_mode) |
 			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(vchan->endpoint) |
 			    SUN4I_DMA_CFG_SRC_ADDR_MODE(io_mode);
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.6 131/149] scsi: ufs: ufs-mediatek: ensure UniPro is not powered down before linkup

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit 7742ca797aa79f280853ffd3e7d2e2af3cd317a5 ]

MediaTek Chipsets can enter proprietary UniPro low-power mode during
suspend while link is in hibern8 state. Make sure leaving low-power mode
before every link startup to prevent lockup in any possible error recovery
path.

At the same time, re-factor related funcitons to improve code readability.

Link: https://lore.kernel.org/r/20200129105251.12466-2-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufs-mediatek.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 53eae5fe2ade2..7ac838cc15d16 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -30,6 +30,11 @@
 #define ufs_mtk_device_reset_ctrl(high, res) \
 	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, high, res)
 
+#define ufs_mtk_unipro_powerdown(hba, powerdown) \
+	ufshcd_dme_set(hba, \
+		       UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0), \
+		       powerdown)
+
 static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 {
 	u32 tmp;
@@ -290,6 +295,8 @@ static int ufs_mtk_pre_link(struct ufs_hba *hba)
 	int ret;
 	u32 tmp;
 
+	ufs_mtk_unipro_powerdown(hba, 0);
+
 	/* disable deep stall */
 	ret = ufshcd_dme_get(hba, UIC_ARG_MIB(VS_SAVEPOWERCONTROL), &tmp);
 	if (ret)
@@ -390,9 +397,7 @@ static int ufs_mtk_link_set_hpm(struct ufs_hba *hba)
 	if (err)
 		return err;
 
-	err = ufshcd_dme_set(hba,
-			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
-			     0);
+	err = ufs_mtk_unipro_powerdown(hba, 0);
 	if (err)
 		return err;
 
@@ -413,14 +418,10 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 {
 	int err;
 
-	err = ufshcd_dme_set(hba,
-			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
-			     1);
+	err = ufs_mtk_unipro_powerdown(hba, 1);
 	if (err) {
 		/* Resume UniPro state for following error recovery */
-		ufshcd_dme_set(hba,
-			       UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
-			       0);
+		ufs_mtk_unipro_powerdown(hba, 0);
 		return err;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 132/149] dmaengine: sun4i: set the linear_mode properly

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit 8faa77332fe01a681ef3097581a37b82adc1c14b ]

Commit 6ebb827f7aad ("dmaengine: sun4i: use 'linear_mode' in
sun4i_dma_prep_dma_cyclic") updated the condition but introduced a semi
colon this making this statement have no effect, so add the bitwise OR
to fix it"

Fixes: 6ebb827f7aad ("dmaengine: sun4i: use 'linear_mode' in sun4i_dma_prep_dma_cyclic")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200214044609.2215861-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/sun4i-dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c
index e87fc7c460dd4..e7ff09a5031db 100644
--- a/drivers/dma/sun4i-dma.c
+++ b/drivers/dma/sun4i-dma.c
@@ -697,7 +697,7 @@ sun4i_dma_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf, size_t len,
 		dest = sconfig->dst_addr;
 		endpoints = SUN4I_DMA_CFG_DST_DRQ_TYPE(vchan->endpoint) |
 			    SUN4I_DMA_CFG_DST_ADDR_MODE(io_mode) |
-			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(ram_type);
+			    SUN4I_DMA_CFG_SRC_DRQ_TYPE(ram_type) |
 			    SUN4I_DMA_CFG_SRC_ADDR_MODE(linear_mode);
 	} else {
 		src = sconfig->src_addr;
-- 
2.20.1

[PATCH AUTOSEL 5.6 133/149] ARM: shmobile: Enable ARM_GLOBAL_TIMER on Cortex-A9 MPCore SoCs

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 408324a3c5383716939eea8096a0f999a0665f7e ]

SH-Mobile AG5 and R-Car H1 SoCs are based on the Cortex-A9 MPCore, which
includes a global timer.

Enable the ARM global timer on these SoCs, which will be used for:
  - the scheduler clock, improving scheduler accuracy from 10 ms to 3 or
    4 ns,
  - delay loops, allowing removal of calls to shmobile_init_delay() from
    the corresponding machine vectors.

Note that when using an old DTB lacking the global timer, the kernel
will still work.  However, loops-per-jiffies will no longer be preset,
and the delay loop will need to be calibrated during boot.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191211135222.26770-5-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-shmobile/setup-r8a7779.c | 1 -
 arch/arm/mach-shmobile/setup-sh73a0.c  | 1 -
 drivers/soc/renesas/Kconfig            | 2 ++
 3 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index b13ec9088ce53..86406e3f9b22e 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -72,7 +72,6 @@ static const char *const r8a7779_compat_dt[] __initconst = {
 DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
 	.smp		= smp_ops(r8a7779_smp_ops),
 	.map_io		= r8a7779_map_io,
-	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= r8a7779_compat_dt,
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index cc08aa7522447..eb4a62fa42895 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -56,7 +56,6 @@ static const char *const sh73a0_boards_compat_dt[] __initconst = {
 DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.smp		= smp_ops(sh73a0_smp_ops),
 	.map_io		= sh73a0_map_io,
-	.init_early	= shmobile_init_delay,
 	.init_machine	= sh73a0_generic_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= sh73a0_boards_compat_dt,
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index ba2b8b51d2d98..de5cfe3fddd33 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -116,6 +116,7 @@ config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
 	select ARCH_RCAR_GEN1
 	select ARM_ERRATA_754322
+	select ARM_GLOBAL_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select SYSC_R8A7779
@@ -163,6 +164,7 @@ config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
 	select ARCH_RMOBILE
 	select ARM_ERRATA_754322
+	select ARM_GLOBAL_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select RENESAS_INTC_IRQPIN
-- 
2.20.1

[PATCH AUTOSEL 5.6 134/149] arm64: dts: qcom: msm8916-samsung-a2015: Reserve Samsung firmware memory

[Sasha Levin]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 8f4a7a00c1019df72cda3002643fb5823ef39183 ]

At the moment, writing large amounts of data to the eMMC causes the device
to freeze. The symptoms vary, sometimes the device reboots immediately,
but usually it will just get stuck.

It turns out that the issue is not actually related to the eMMC:
Apparently, Samsung has made some modifications to the TrustZone firmware.
These require additional memory which is reserved at 0x85500000-0x86000000.
The downstream kernel describes this memory reservation as:

/* Additionally Reserved 6MB for TIMA and Increased the TZ app size
 * by 2MB [total 8 MB ]
 */

This suggests that it is used for additional TZ apps, although the extra
memory is actually 11 MB instead of the 8 MB mentioned in the comment.

Writing to the protected memory causes the kernel to crash or freeze.
In our case, writing to the eMMC causes the disk cache to fill
the available RAM, until the kernel eventually crashes
when attempting to use the reserved memory.

Add the additional memory as reserved-memory to fix this problem.

Fixes: 1329c1ab0730 ("arm64: dts: qcom: Add device tree for Samsung Galaxy A3U/A5U")
Reported-by: Michael Srba <Michael.Srba@seznam.cz>
Tested-by: Michael Srba <Michael.Srba@seznam.cz> # a3u
Tested-by: Stephan Gerhold <stephan@gerhold.net> # a5u
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191231112511.83342-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index bd1eb3eeca53f..43c5e0f882f14 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -15,6 +15,14 @@
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
 	soc {
 		sdhci@7824000 {
 			status = "okay";
-- 
2.20.1

[PATCH AUTOSEL 5.6 135/149] PCI: hv: Add missing kfree(hbus) in hv_pci_probe()'s error handling path

[Sasha Levin]

From: Dexuan Cui <decui@microsoft.com>

[ Upstream commit 42c3d41832ef4fcf60aaa6f748de01ad99572adf ]

Now that we use kzalloc() to allocate the hbus buffer, we must call
kfree() in the error path as well to prevent memory leakage.

Fixes: 877b911a5ba0 ("PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-hyperv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 9977abff92fc5..6b3cee4324047 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -3058,7 +3058,7 @@ static int hv_pci_probe(struct hv_device *hdev,
 free_dom:
 	hv_put_dom_num(hbus->sysdata.domain);
 free_bus:
-	free_page((unsigned long)hbus);
+	kfree(hbus);
 	return ret;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 136/149] bus: hisi_lpc: Fixup IO ports addresses to avoid use-after-free in host removal

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit a6dd255bdd7d00bbdbf78ba00bde9fc64f86c3a7 ]

Some released ACPI FW for Huawei boards describes incorrect the port IO
address range for child devices, in that it tells us the IO port max range
is 0x3fff for each child device, which is not correct. The address range
should be [e4:e8) or similar. With this incorrect upper range, the child
device IO port resources overlap.

As such, the kernel thinks that the LPC host serial device is a child of
the IPMI device:

root@(none)$ more /proc/ioports
[...]
00ffc0e3-00ffffff : hisi-lpc-ipmi.0.auto
  00ffc0e3-00ffc0e3 : ipmi_si
  00ffc0e4-00ffc0e4 : ipmi_si
  00ffc0e5-00ffc0e5 : ipmi_si
  00ffc2f7-00ffffff : serial8250.1.auto
    00ffc2f7-00ffc2fe : serial
root@(none)$

They should both be siblings. Note that these are logical PIO addresses,
which have a direct mapping from the FW IO port ranges.

This shows up as a real issue when we enable CONFIG_KASAN and
CONFIG_DEBUG_TEST_DRIVER_REMOVE - we see use-after-free warnings in the
host removal path:

==================================================================
BUG: KASAN: use-after-free in release_resource+0x38/0xc8
Read of size 8 at addr ffff0026accdbc38 by task swapper/0/1

CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00001-g68e186e77b5c-dirty #1593
Hardware name: Huawei Taishan 2180 /D03, BIOS Hisilicon D03 IT20 Nemo 2.0 RC0 03/30/2018
Call trace:
dump_backtrace+0x0/0x290
show_stack+0x14/0x20
dump_stack+0xf0/0x14c
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x12c/0x23c
kasan_report+0xc/0x18
__asan_load8+0x94/0xb8
release_resource+0x38/0xc8
platform_device_del.part.10+0x80/0xe0
platform_device_unregister+0x20/0x38
hisi_lpc_acpi_remove_subdev+0x10/0x20
device_for_each_child+0xc8/0x128
hisi_lpc_acpi_remove+0x4c/0xa8
hisi_lpc_remove+0xbc/0xc0
platform_drv_remove+0x3c/0x68
really_probe+0x174/0x548
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa4/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x234/0x2f0
driver_register+0xbc/0x1d0
__platform_driver_register+0x7c/0x88
hisi_lpc_driver_init+0x18/0x20
do_one_initcall+0xb4/0x258
kernel_init_freeable+0x248/0x2c0
kernel_init+0x10/0x118
ret_from_fork+0x10/0x1c

...

The issue here is that the kernel created an incorrect parent-child
resource dependency between two devices, and references the false parent
node when deleting the second child device, when it had been deleted
already.

Fix up the child device resources from FW to create proper IO port
resource relationships for broken FW.

With this, the IO port layout looks more healthy:

root@(none)$ more /proc/ioports
[...]
00ffc0e3-00ffc0e7 : hisi-lpc-ipmi.0.auto
  00ffc0e3-00ffc0e3 : ipmi_si
  00ffc0e4-00ffc0e4 : ipmi_si
  00ffc0e5-00ffc0e5 : ipmi_si
00ffc2f7-00ffc2ff : serial8250.1.auto
  00ffc2f7-00ffc2fe : serial

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/hisi_lpc.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c
index 8101df901830e..378f5d62a9912 100644
--- a/drivers/bus/hisi_lpc.c
+++ b/drivers/bus/hisi_lpc.c
@@ -357,6 +357,26 @@ static int hisi_lpc_acpi_xlat_io_res(struct acpi_device *adev,
 	return 0;
 }
 
+/*
+ * Released firmware describes the IO port max address as 0x3fff, which is
+ * the max host bus address. Fixup to a proper range. This will probably
+ * never be fixed in firmware.
+ */
+static void hisi_lpc_acpi_fixup_child_resource(struct device *hostdev,
+					       struct resource *r)
+{
+	if (r->end != 0x3fff)
+		return;
+
+	if (r->start == 0xe4)
+		r->end = 0xe4 + 0x04 - 1;
+	else if (r->start == 0x2f8)
+		r->end = 0x2f8 + 0x08 - 1;
+	else
+		dev_warn(hostdev, "unrecognised resource %pR to fixup, ignoring\n",
+			 r);
+}
+
 /*
  * hisi_lpc_acpi_set_io_res - set the resources for a child
  * @child: the device node to be updated the I/O resource
@@ -418,8 +438,11 @@ static int hisi_lpc_acpi_set_io_res(struct device *child,
 		return -ENOMEM;
 	}
 	count = 0;
-	list_for_each_entry(rentry, &resource_list, node)
-		resources[count++] = *rentry->res;
+	list_for_each_entry(rentry, &resource_list, node) {
+		resources[count] = *rentry->res;
+		hisi_lpc_acpi_fixup_child_resource(hostdev, &resources[count]);
+		count++;
+	}
 
 	acpi_dev_free_resource_list(&resource_list);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 137/149] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit a81bcfb6ac20cdd2e8dec3da14c8bbe1d18f6321 ]

When high load on the DWC3 SuperSpeed port, the controller crashes with:
[  221.141621] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[  221.157631] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[  221.157635] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
[  221.159901] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[  221.159961] hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
[  221.160076] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
[  221.165946] usb 2-1.1-port1: cannot reset (err = -22)

Setting the parkmode_disable_ss_quirk quirk fixes the issue.

Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
CC: Dongjin Kim <tobetter@gmail.com>
Link: https://lore.kernel.org/r/20200221091532.8142-4-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index abe04f4ad7d87..87b9a47a51b92 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2220,6 +2220,7 @@
 				dr_mode = "host";
 				snps,dis_u2_susphy_quirk;
 				snps,quirk-frame-length-adjustment;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 138/149] rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()

[Sasha Levin]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

[ Upstream commit 66e4f4a9cc389b277e187c115a285fad2cba5485 ]

cmos_interrupt() isn't always called from hardirq context, so
we must use spin_lock_irqsave() & co.

================================
WARNING: inconsistent lock state
5.6.0-rc2-CI-CI_DRM_7981+ #1 Tainted: G     U
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
rtcwake/4315 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffffffff82635198 (rtc_lock){?...}, at: cmos_interrupt+0x18/0x100
{IN-HARDIRQ-W} state was registered at:
  lock_acquire+0xa7/0x1c0
  _raw_spin_lock+0x2a/0x40
  cmos_interrupt+0x18/0x100
  rtc_handler+0x75/0xc0
  acpi_ev_fixed_event_detect+0xf9/0x132
  acpi_ev_sci_xrupt_handler+0xb/0x28
  acpi_irq+0x13/0x30
  __handle_irq_event_percpu+0x41/0x2c0
  handle_irq_event_percpu+0x2b/0x70
  handle_irq_event+0x2f/0x50
  handle_fasteoi_irq+0x8e/0x150
  do_IRQ+0x7e/0x160
  ret_from_intr+0x0/0x35
  mwait_idle+0x7e/0x200
  do_idle+0x1bb/0x260
  cpu_startup_entry+0x14/0x20
  start_secondary+0x15f/0x1b0
  secondary_startup_64+0xa4/0xb0
irq event stamp: 42003
hardirqs last  enabled at (42003): [<ffffffff81a36567>] _raw_spin_unlock_irqrestore+0x47/0x60
hardirqs last disabled at (42002): [<ffffffff81a362ed>] _raw_spin_lock_irqsave+0xd/0x50
softirqs last  enabled at (41848): [<ffffffff81e00385>] __do_softirq+0x385/0x47f
softirqs last disabled at (41841): [<ffffffff810bab3a>] irq_exit+0xba/0xc0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(rtc_lock);
  <Interrupt>
    lock(rtc_lock);

 *** DEADLOCK ***

6 locks held by rtcwake/4315:
 #0: ffff888175dc9408 (sb_writers#5){.+.+}, at: vfs_write+0x1a4/0x1d0
 #1: ffff88817406ca80 (&of->mutex){+.+.}, at: kernfs_fop_write+0xdd/0x1b0
 #2: ffff888179be85e0 (kn->count#236){.+.+}, at: kernfs_fop_write+0xe6/0x1b0
 #3: ffffffff82641e00 (system_transition_mutex){+.+.}, at: pm_suspend+0xb3/0x3b0
 #4: ffffffff826b3ee0 (acpi_scan_lock){+.+.}, at: acpi_suspend_begin+0x47/0x80
 #5: ffff888178fc3960 (&dev->mutex){....}, at: device_resume+0x92/0x1c0

stack backtrace:
CPU: 3 PID: 4315 Comm: rtcwake Tainted: G     U            5.6.0-rc2-CI-CI_DRM_7981+ #1
Hardware name: Google Soraka/Soraka, BIOS MrChromebox-4.10 08/25/2019
Call Trace:
 dump_stack+0x71/0x9b
 mark_lock+0x49a/0x500
 ? print_shortest_lock_dependencies+0x200/0x200
 __lock_acquire+0x6d4/0x15d0
 ? __lock_acquire+0x460/0x15d0
 lock_acquire+0xa7/0x1c0
 ? cmos_interrupt+0x18/0x100
 _raw_spin_lock+0x2a/0x40
 ? cmos_interrupt+0x18/0x100
 cmos_interrupt+0x18/0x100
 cmos_resume+0x1fd/0x290
 ? __acpi_pm_set_device_wakeup+0x24/0x100
 pnp_bus_resume+0x5e/0x90
 ? pnp_bus_suspend+0x10/0x10
 dpm_run_callback+0x64/0x280
 device_resume+0xd4/0x1c0
 ? dpm_watchdog_set+0x60/0x60
 dpm_resume+0x106/0x410
 ? dpm_resume_early+0x38c/0x3e0
 dpm_resume_end+0x8/0x10
 suspend_devices_and_enter+0x16f/0xbe0
 ? rcu_read_lock_sched_held+0x4d/0x80
 pm_suspend+0x344/0x3b0
 state_store+0x78/0xe0
 kernfs_fop_write+0x112/0x1b0
 vfs_write+0xb9/0x1d0
 ksys_write+0x9f/0xe0
 do_syscall_64+0x4f/0x220
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff934307154
Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 b1 07 2e 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 41 54 55 49 89 d4 53 48 89 f5
RSP: 002b:00007ffe2647c168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007ff934307154
RDX: 0000000000000004 RSI: 000055de3ec4e5a0 RDI: 000000000000000a
RBP: 000055de3ec4e5a0 R08: 000055de3ec4c5e0 R09: 00007ff9349f3740
R10: 000055de3ec4a010 R11: 0000000000000246 R12: 000055de3ec4c500
R13: 0000000000000004 R14: 00007ff9345df2a0 R15: 00007ff9345de760

Fixes: c6d3a278cc12 ("rtc: cmos: acknowledge ACPI driven wake alarms upon resume")
Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20200221144739.11746-1-ville.syrjala@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-cmos.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index b795fe4cbd2e9..fb13993fad31c 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -649,10 +649,11 @@ static struct cmos_rtc	cmos_rtc;
 
 static irqreturn_t cmos_interrupt(int irq, void *p)
 {
+	unsigned long	flags;
 	u8		irqstat;
 	u8		rtc_control;
 
-	spin_lock(&rtc_lock);
+	spin_lock_irqsave(&rtc_lock, flags);
 
 	/* When the HPET interrupt handler calls us, the interrupt
 	 * status is passed as arg1 instead of the irq number.  But
@@ -686,7 +687,7 @@ static irqreturn_t cmos_interrupt(int irq, void *p)
 			hpet_mask_rtc_irq_bit(RTC_AIE);
 		CMOS_READ(RTC_INTR_FLAGS);
 	}
-	spin_unlock(&rtc_lock);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	if (is_intr(irqstat)) {
 		rtc_update_irq(p, 1, irqstat);
-- 
2.20.1

[PATCH AUTOSEL 5.6 139/149] powerpc/book3s64: Fix error handling in mm_iommu_do_alloc()

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit c4b78169e3667413184c9a20e11b5832288a109f ]

The last jump to free_exit in mm_iommu_do_alloc() happens after page
pointers in struct mm_iommu_table_group_mem_t were already converted to
physical addresses. Thus calling put_page() on these physical addresses
will likely crash.

This moves the loop which calculates the pageshift and converts page
struct pointers to physical addresses later after the point when
we cannot fail; thus eliminating the need to convert pointers back.

Fixes: eb9d7a62c386 ("powerpc/mm_iommu: Fix potential deadlock")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191223060351.26359-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/book3s64/iommu_api.c | 39 +++++++++++++++-------------
 1 file changed, 21 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/mm/book3s64/iommu_api.c b/arch/powerpc/mm/book3s64/iommu_api.c
index eba73ebd8ae57..fa05bbd1f6829 100644
--- a/arch/powerpc/mm/book3s64/iommu_api.c
+++ b/arch/powerpc/mm/book3s64/iommu_api.c
@@ -121,24 +121,6 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
 		goto free_exit;
 	}
 
-	pageshift = PAGE_SHIFT;
-	for (i = 0; i < entries; ++i) {
-		struct page *page = mem->hpages[i];
-
-		/*
-		 * Allow to use larger than 64k IOMMU pages. Only do that
-		 * if we are backed by hugetlb.
-		 */
-		if ((mem->pageshift > PAGE_SHIFT) && PageHuge(page))
-			pageshift = page_shift(compound_head(page));
-		mem->pageshift = min(mem->pageshift, pageshift);
-		/*
-		 * We don't need struct page reference any more, switch
-		 * to physical address.
-		 */
-		mem->hpas[i] = page_to_pfn(page) << PAGE_SHIFT;
-	}
-
 good_exit:
 	atomic64_set(&mem->mapped, 1);
 	mem->used = 1;
@@ -158,6 +140,27 @@ static long mm_iommu_do_alloc(struct mm_struct *mm, unsigned long ua,
 		}
 	}
 
+	if (mem->dev_hpa == MM_IOMMU_TABLE_INVALID_HPA) {
+		/*
+		 * Allow to use larger than 64k IOMMU pages. Only do that
+		 * if we are backed by hugetlb. Skip device memory as it is not
+		 * backed with page structs.
+		 */
+		pageshift = PAGE_SHIFT;
+		for (i = 0; i < entries; ++i) {
+			struct page *page = mem->hpages[i];
+
+			if ((mem->pageshift > PAGE_SHIFT) && PageHuge(page))
+				pageshift = page_shift(compound_head(page));
+			mem->pageshift = min(mem->pageshift, pageshift);
+			/*
+			 * We don't need struct page reference any more, switch
+			 * to physical address.
+			 */
+			mem->hpas[i] = page_to_pfn(page) << PAGE_SHIFT;
+		}
+	}
+
 	list_add_rcu(&mem->next, &mm->context.iommu_group_mem_list);
 
 	mutex_unlock(&mem_list_mutex);
-- 
2.20.1

[PATCH AUTOSEL 5.6 140/149] drivers: qcom: rpmh-rsc: Use rcuidle tracepoints for rpmh

[Sasha Levin]

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit efde2659b0fe835732047357b2902cca14f054d9 ]

This tracepoint is hit now that we call into the rpmh code from the cpu
idle path. Let's move this to be an rcuidle tracepoint so that we avoid
the RCU idle splat below

 =============================
 WARNING: suspicious RCU usage
 5.4.10 #68 Tainted: G S
 -----------------------------
 drivers/soc/qcom/trace-rpmh.h:72 suspicious rcu_dereference_check() usage!

 other info that might help us debug this:

 RCU used illegally from idle CPU!
 rcu_scheduler_active = 2, debug_locks = 1
 RCU used illegally from extended quiescent state!
 5 locks held by swapper/2/0:
  #0: ffffff81745d6ee8 (&(&genpd->slock)->rlock){+.+.}, at: genpd_lock_spin+0x1c/0x2c
  #1: ffffff81745da6e8 (&(&genpd->slock)->rlock/1){....}, at: genpd_lock_nested_spin+0x24/0x34
  #2: ffffff8174f2ca20 (&(&genpd->slock)->rlock/2){....}, at: genpd_lock_nested_spin+0x24/0x34
  #3: ffffff8174f2c300 (&(&drv->client.cache_lock)->rlock){....}, at: rpmh_flush+0x48/0x24c
  #4: ffffff8174f2c150 (&(&tcs->lock)->rlock){+.+.}, at: rpmh_rsc_write_ctrl_data+0x74/0x270

 stack backtrace:
 CPU: 2 PID: 0 Comm: swapper/2 Tainted: G S                5.4.10 #68
 Call trace:
  dump_backtrace+0x0/0x174
  show_stack+0x20/0x2c
  dump_stack+0xc8/0x124
  lockdep_rcu_suspicious+0xe4/0x104
  __tcs_buffer_write+0x230/0x2d0
  rpmh_rsc_write_ctrl_data+0x210/0x270
  rpmh_flush+0x84/0x24c
  rpmh_domain_power_off+0x78/0x98
  _genpd_power_off+0x40/0xc0
  genpd_power_off+0x168/0x208
  genpd_power_off+0x1e0/0x208
  genpd_power_off+0x1e0/0x208
  genpd_runtime_suspend+0x1ac/0x220
  __rpm_callback+0x70/0xfc
  rpm_callback+0x34/0x8c
  rpm_suspend+0x218/0x4a4
  __pm_runtime_suspend+0x88/0xac
  psci_enter_domain_idle_state+0x3c/0xb4
  cpuidle_enter_state+0xb8/0x284
  cpuidle_enter+0x38/0x4c
  call_cpuidle+0x3c/0x68
  do_idle+0x194/0x260
  cpu_startup_entry+0x24/0x28
  secondary_start_kernel+0x150/0x15c

Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Fixes: a65a397f2451 ("cpuidle: psci: Add support for PM domains by using genpd")
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200115013751.249588-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/rpmh-rsc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index e278fc11fe5cf..b71822131f598 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -277,7 +277,7 @@ static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
 		write_tcs_cmd(drv, RSC_DRV_CMD_MSGID, tcs_id, j, msgid);
 		write_tcs_cmd(drv, RSC_DRV_CMD_ADDR, tcs_id, j, cmd->addr);
 		write_tcs_cmd(drv, RSC_DRV_CMD_DATA, tcs_id, j, cmd->data);
-		trace_rpmh_send_msg(drv, tcs_id, j, msgid, cmd);
+		trace_rpmh_send_msg_rcuidle(drv, tcs_id, j, msgid, cmd);
 	}
 
 	write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, tcs_id, cmd_complete);
-- 
2.20.1

[PATCH AUTOSEL 5.6 141/149] arm64: dts: qcom: msm8998-mtp: Disable funnel 4 and 5

[Sasha Levin]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 3498d9c05f804414c4645a2c0bba0187630fe5f0 ]

Disable Coresight funnel 4 and 5, for now, as these causes the MTP to
crash when clock late_initcall disables unused clocks.

Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200308055445.1992189-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 0e0b9bc12945f..8a14b2bf7bca3 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -95,11 +95,15 @@
 };
 
 &funnel4 {
-	status = "okay";
+	// FIXME: Figure out why clock late_initcall crashes the board with
+	// this enabled.
+	// status = "okay";
 };
 
 &funnel5 {
-	status = "okay";
+	// FIXME: Figure out why clock late_initcall crashes the board with
+	// this enabled.
+	// status = "okay";
 };
 
 &pm8005_lsid1 {
-- 
2.20.1

[PATCH AUTOSEL 5.6 142/149] nfsd: Don't add locks to closed or closing open stateids

[Sasha Levin]

From: Trond Myklebust <trondmy@gmail.com>

[ Upstream commit a451b12311aa8c96c6f6e01c783a86995dc3ec6b ]

In NFSv4, the lock stateids are tied to the lockowner, and the open stateid,
so that the action of closing the file also results in either an automatic
loss of the locks, or an error of the form NFS4ERR_LOCKS_HELD.

In practice this means we must not add new locks to the open stateid
after the close process has been invoked. In fact doing so, can result
in the following panic:

 kernel BUG at lib/list_debug.c:51!
 invalid opcode: 0000 [#1] SMP NOPTI
 CPU: 2 PID: 1085 Comm: nfsd Not tainted 5.6.0-rc3+ #2
 Hardware name: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW71.00V.14410784.B64.1908150010 08/15/2019
 RIP: 0010:__list_del_entry_valid.cold+0x31/0x55
 Code: 1a 3d 9b e8 74 10 c2 ff 0f 0b 48 c7 c7 f0 1a 3d 9b e8 66 10 c2 ff 0f 0b 48 89 f2 48 89 fe 48 c7 c7 b0 1a 3d 9b e8 52 10 c2 ff <0f> 0b 48 89 fe 4c 89 c2 48 c7 c7 78 1a 3d 9b e8 3e 10 c2 ff 0f 0b
 RSP: 0018:ffffb296c1d47d90 EFLAGS: 00010246
 RAX: 0000000000000054 RBX: ffff8ba032456ec8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff8ba039e99cc8 RDI: ffff8ba039e99cc8
 RBP: ffff8ba032456e60 R08: 0000000000000781 R09: 0000000000000003
 R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ba009a4abe0
 R13: ffff8ba032456e8c R14: 0000000000000000 R15: ffff8ba00adb01d8
 FS:  0000000000000000(0000) GS:ffff8ba039e80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fb213f0b008 CR3: 00000001347de006 CR4: 00000000003606e0
 Call Trace:
  release_lock_stateid+0x2b/0x80 [nfsd]
  nfsd4_free_stateid+0x1e9/0x210 [nfsd]
  nfsd4_proc_compound+0x414/0x700 [nfsd]
  ? nfs4svc_decode_compoundargs+0x407/0x4c0 [nfsd]
  nfsd_dispatch+0xc1/0x200 [nfsd]
  svc_process_common+0x476/0x6f0 [sunrpc]
  ? svc_sock_secure_port+0x12/0x30 [sunrpc]
  ? svc_recv+0x313/0x9c0 [sunrpc]
  ? nfsd_svc+0x2d0/0x2d0 [nfsd]
  svc_process+0xd4/0x110 [sunrpc]
  nfsd+0xe3/0x140 [nfsd]
  kthread+0xf9/0x130
  ? nfsd_destroy+0x50/0x50 [nfsd]
  ? kthread_park+0x90/0x90
  ret_from_fork+0x1f/0x40

The fix is to ensure that lock creation tests for whether or not the
open stateid is unhashed, and to fail if that is the case.

Fixes: 659aefb68eca ("nfsd: Ensure we don't recognise lock stateids after freeing them")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfsd/nfs4state.c | 73 ++++++++++++++++++++++++++-------------------
 1 file changed, 43 insertions(+), 30 deletions(-)

diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 65cfe9ab47be0..1ba4514be18d3 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -494,6 +494,8 @@ find_any_file(struct nfs4_file *f)
 {
 	struct nfsd_file *ret;
 
+	if (!f)
+		return NULL;
 	spin_lock(&f->fi_lock);
 	ret = __nfs4_get_fd(f, O_RDWR);
 	if (!ret) {
@@ -1309,6 +1311,12 @@ static void nfs4_put_stateowner(struct nfs4_stateowner *sop)
 	nfs4_free_stateowner(sop);
 }
 
+static bool
+nfs4_ol_stateid_unhashed(const struct nfs4_ol_stateid *stp)
+{
+	return list_empty(&stp->st_perfile);
+}
+
 static bool unhash_ol_stateid(struct nfs4_ol_stateid *stp)
 {
 	struct nfs4_file *fp = stp->st_stid.sc_file;
@@ -1379,9 +1387,11 @@ static bool unhash_lock_stateid(struct nfs4_ol_stateid *stp)
 {
 	lockdep_assert_held(&stp->st_stid.sc_client->cl_lock);
 
+	if (!unhash_ol_stateid(stp))
+		return false;
 	list_del_init(&stp->st_locks);
 	nfs4_unhash_stid(&stp->st_stid);
-	return unhash_ol_stateid(stp);
+	return true;
 }
 
 static void release_lock_stateid(struct nfs4_ol_stateid *stp)
@@ -1446,13 +1456,12 @@ static void release_open_stateid_locks(struct nfs4_ol_stateid *open_stp,
 static bool unhash_open_stateid(struct nfs4_ol_stateid *stp,
 				struct list_head *reaplist)
 {
-	bool unhashed;
-
 	lockdep_assert_held(&stp->st_stid.sc_client->cl_lock);
 
-	unhashed = unhash_ol_stateid(stp);
+	if (!unhash_ol_stateid(stp))
+		return false;
 	release_open_stateid_locks(stp, reaplist);
-	return unhashed;
+	return true;
 }
 
 static void release_open_stateid(struct nfs4_ol_stateid *stp)
@@ -6393,21 +6402,21 @@ alloc_init_lock_stateowner(unsigned int strhashval, struct nfs4_client *clp,
 }
 
 static struct nfs4_ol_stateid *
-find_lock_stateid(struct nfs4_lockowner *lo, struct nfs4_file *fp)
+find_lock_stateid(const struct nfs4_lockowner *lo,
+		  const struct nfs4_ol_stateid *ost)
 {
 	struct nfs4_ol_stateid *lst;
-	struct nfs4_client *clp = lo->lo_owner.so_client;
 
-	lockdep_assert_held(&clp->cl_lock);
+	lockdep_assert_held(&ost->st_stid.sc_client->cl_lock);
 
-	list_for_each_entry(lst, &lo->lo_owner.so_stateids, st_perstateowner) {
-		if (lst->st_stid.sc_type != NFS4_LOCK_STID)
-			continue;
-		if (lst->st_stid.sc_file == fp) {
-			refcount_inc(&lst->st_stid.sc_count);
-			return lst;
+	/* If ost is not hashed, ost->st_locks will not be valid */
+	if (!nfs4_ol_stateid_unhashed(ost))
+		list_for_each_entry(lst, &ost->st_locks, st_locks) {
+			if (lst->st_stateowner == &lo->lo_owner) {
+				refcount_inc(&lst->st_stid.sc_count);
+				return lst;
+			}
 		}
-	}
 	return NULL;
 }
 
@@ -6423,11 +6432,11 @@ init_lock_stateid(struct nfs4_ol_stateid *stp, struct nfs4_lockowner *lo,
 	mutex_lock_nested(&stp->st_mutex, OPEN_STATEID_MUTEX);
 retry:
 	spin_lock(&clp->cl_lock);
-	spin_lock(&fp->fi_lock);
-	retstp = find_lock_stateid(lo, fp);
+	if (nfs4_ol_stateid_unhashed(open_stp))
+		goto out_close;
+	retstp = find_lock_stateid(lo, open_stp);
 	if (retstp)
-		goto out_unlock;
-
+		goto out_found;
 	refcount_inc(&stp->st_stid.sc_count);
 	stp->st_stid.sc_type = NFS4_LOCK_STID;
 	stp->st_stateowner = nfs4_get_stateowner(&lo->lo_owner);
@@ -6436,22 +6445,26 @@ init_lock_stateid(struct nfs4_ol_stateid *stp, struct nfs4_lockowner *lo,
 	stp->st_access_bmap = 0;
 	stp->st_deny_bmap = open_stp->st_deny_bmap;
 	stp->st_openstp = open_stp;
+	spin_lock(&fp->fi_lock);
 	list_add(&stp->st_locks, &open_stp->st_locks);
 	list_add(&stp->st_perstateowner, &lo->lo_owner.so_stateids);
 	list_add(&stp->st_perfile, &fp->fi_stateids);
-out_unlock:
 	spin_unlock(&fp->fi_lock);
 	spin_unlock(&clp->cl_lock);
-	if (retstp) {
-		if (nfsd4_lock_ol_stateid(retstp) != nfs_ok) {
-			nfs4_put_stid(&retstp->st_stid);
-			goto retry;
-		}
-		/* To keep mutex tracking happy */
-		mutex_unlock(&stp->st_mutex);
-		stp = retstp;
-	}
 	return stp;
+out_found:
+	spin_unlock(&clp->cl_lock);
+	if (nfsd4_lock_ol_stateid(retstp) != nfs_ok) {
+		nfs4_put_stid(&retstp->st_stid);
+		goto retry;
+	}
+	/* To keep mutex tracking happy */
+	mutex_unlock(&stp->st_mutex);
+	return retstp;
+out_close:
+	spin_unlock(&clp->cl_lock);
+	mutex_unlock(&stp->st_mutex);
+	return NULL;
 }
 
 static struct nfs4_ol_stateid *
@@ -6466,7 +6479,7 @@ find_or_create_lock_stateid(struct nfs4_lockowner *lo, struct nfs4_file *fi,
 
 	*new = false;
 	spin_lock(&clp->cl_lock);
-	lst = find_lock_stateid(lo, fi);
+	lst = find_lock_stateid(lo, ost);
 	spin_unlock(&clp->cl_lock);
 	if (lst != NULL) {
 		if (nfsd4_lock_ol_stateid(lst) == nfs_ok)
-- 
2.20.1

[PATCH AUTOSEL 5.6 143/149] nvmem: fix memory leak in error path

[Sasha Levin]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

[ Upstream commit f7d8d7dcd978382dd1dd36e240dcddbfa6697796 ]

We need to free the ida mapping and nvmem struct if the write-protect
GPIO lookup fails.

Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvmem/core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 5f1988498d752..415ed8c5583a3 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -353,8 +353,12 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
 	else
 		nvmem->wp_gpio = gpiod_get_optional(config->dev, "wp",
 						    GPIOD_OUT_HIGH);
-	if (IS_ERR(nvmem->wp_gpio))
-		return ERR_CAST(nvmem->wp_gpio);
+	if (IS_ERR(nvmem->wp_gpio)) {
+		ida_simple_remove(&nvmem_ida, nvmem->id);
+		rval = PTR_ERR(nvmem->wp_gpio);
+		kfree(nvmem);
+		return ERR_PTR(rval);
+	}
 
 
 	kref_init(&nvmem->refcnt);
-- 
2.20.1

[PATCH AUTOSEL 5.6 144/149] ext4: check for non-zero journal inum in ext4_calculate_overhead

[Sasha Levin]

From: Ritesh Harjani <riteshh@linux.ibm.com>

[ Upstream commit f1eec3b0d0a849996ebee733b053efa71803dad5 ]

While calculating overhead for internal journal, also check
that j_inum shouldn't be 0. Otherwise we get below error with
xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.

It could be simply reproduced with loop device with an external journal
and marking blockdev as RO before mounting.

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
CPU: 107 PID: 115347 Comm: mount Tainted: G             L   --------- -t - 4.18.0-167.el8.ppc64le #1
NIP:  c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4
<...>
NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0
LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0
<...>
Call Trace:
generic_make_request_checks+0x6b0/0x7d0 (unreliable)
generic_make_request+0x3c/0x420
submit_bio+0xd8/0x200
submit_bh_wbc+0x1e8/0x250
__sync_dirty_buffer+0xd0/0x210
ext4_commit_super+0x310/0x420 [ext4]
__ext4_error+0xa4/0x1e0 [ext4]
__ext4_iget+0x388/0xe10 [ext4]
ext4_get_journal_inode+0x40/0x150 [ext4]
ext4_calculate_overhead+0x5a8/0x610 [ext4]
ext4_fill_super+0x3188/0x3260 [ext4]
mount_bdev+0x778/0x8f0
ext4_mount+0x28/0x50 [ext4]
mount_fs+0x74/0x230
vfs_kern_mount.part.6+0x6c/0x250
do_mount+0x2fc/0x1280
sys_mount+0x158/0x180
system_call+0x5c/0x70
EXT4-fs (pmem1p2): no journal found
EXT4-fs (pmem1p2): can't get journal size
EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery

Fixes: 3c816ded78bb ("ext4: use journal inode to determine journal overhead")
Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200316093038.25485-1-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 0c7c4adb664ec..d5b07c7a65435 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3609,7 +3609,8 @@ int ext4_calculate_overhead(struct super_block *sb)
 	 */
 	if (sbi->s_journal && !sbi->journal_bdev)
 		overhead += EXT4_NUM_B2C(sbi, sbi->s_journal->j_maxlen);
-	else if (ext4_has_feature_journal(sb) && !sbi->s_journal) {
+	else if (ext4_has_feature_journal(sb) && !sbi->s_journal && j_inum) {
+		/* j_inum for internal journal is non-zero */
 		j_inode = ext4_get_journal_inode(sb, j_inum);
 		if (j_inode) {
 			j_blocks = j_inode->i_size >> sb->s_blocksize_bits;
-- 
2.20.1

[PATCH AUTOSEL 5.6 145/149] ext4: avoid ENOSPC when avoiding to reuse recently deleted inodes

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit d05466b27b19af8e148376590ed54d289b607f0a ]

When ext4 is running on a filesystem without a journal, it tries not to
reuse recently deleted inodes to provide better chances for filesystem
recovery in case of crash. However this logic forbids reuse of freed
inodes for up to 5 minutes and especially for filesystems with smaller
number of inodes can lead to ENOSPC errors returned when allocating new
inodes.

Fix the problem by allowing to reuse recently deleted inode if there's
no other inode free in the scanned range.

Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200318121317.31941-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/ialloc.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index f95ee99091e4c..9652a0eadd1ce 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -712,21 +712,34 @@ static int recently_deleted(struct super_block *sb, ext4_group_t group, int ino)
 static int find_inode_bit(struct super_block *sb, ext4_group_t group,
 			  struct buffer_head *bitmap, unsigned long *ino)
 {
+	bool check_recently_deleted = EXT4_SB(sb)->s_journal == NULL;
+	unsigned long recently_deleted_ino = EXT4_INODES_PER_GROUP(sb);
+
 next:
 	*ino = ext4_find_next_zero_bit((unsigned long *)
 				       bitmap->b_data,
 				       EXT4_INODES_PER_GROUP(sb), *ino);
 	if (*ino >= EXT4_INODES_PER_GROUP(sb))
-		return 0;
+		goto not_found;
 
-	if ((EXT4_SB(sb)->s_journal == NULL) &&
-	    recently_deleted(sb, group, *ino)) {
+	if (check_recently_deleted && recently_deleted(sb, group, *ino)) {
+		recently_deleted_ino = *ino;
 		*ino = *ino + 1;
 		if (*ino < EXT4_INODES_PER_GROUP(sb))
 			goto next;
-		return 0;
+		goto not_found;
 	}
-
+	return 1;
+not_found:
+	if (recently_deleted_ino >= EXT4_INODES_PER_GROUP(sb))
+		return 0;
+	/*
+	 * Not reusing recently deleted inodes is mostly a preference. We don't
+	 * want to report ENOSPC or skew allocation patterns because of that.
+	 * So return even recently deleted inode if we could find better in the
+	 * given range.
+	 */
+	*ino = recently_deleted_ino;
 	return 1;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 146/149] powerpc/pseries: Handle UE event for memcpy_mcsafe

[Sasha Levin]

From: Ganesh Goudar <ganeshgr@linux.ibm.com>

[ Upstream commit efbc4303b255bb80ab1283794b36dd5fe1fb0ec3 ]

memcpy_mcsafe has been implemented for power machines which is used
by pmem infrastructure, so that an UE encountered during memcpy from
pmem devices would not result in panic instead a right error code
is returned. The implementation expects machine check handler to ignore
the event and set nip to continue the execution from fixup code.

Appropriate changes are already made to powernv machine check handler,
make similar changes to pseries machine check handler to ignore the
the event and set nip to continue execution at the fixup entry if we
hit UE at an instruction with a fixup entry.

while we are at it, have a common function which searches the exception
table entry and updates nip with fixup address, and any future common
changes can be made in this function that are valid for both architectures.

powernv changes are made by
commit 895e3dceeb97 ("powerpc/mce: Handle UE event for memcpy_mcsafe")

Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Santosh S <santosh@fossix.org>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200326184916.31172-1-ganeshgr@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/mce.h       |  2 ++
 arch/powerpc/kernel/mce.c            | 14 ++++++++++++++
 arch/powerpc/kernel/mce_power.c      |  8 ++------
 arch/powerpc/platforms/pseries/ras.c |  3 +++
 4 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/mce.h b/arch/powerpc/include/asm/mce.h
index 6a6ddaabdb34d..376a395daf329 100644
--- a/arch/powerpc/include/asm/mce.h
+++ b/arch/powerpc/include/asm/mce.h
@@ -218,6 +218,8 @@ extern void machine_check_queue_event(void);
 extern void machine_check_print_event_info(struct machine_check_event *evt,
 					   bool user_mode, bool in_guest);
 unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr);
+extern void mce_common_process_ue(struct pt_regs *regs,
+				  struct mce_error_info *mce_err);
 #ifdef CONFIG_PPC_BOOK3S_64
 void flush_and_reload_slb(void);
 #endif /* CONFIG_PPC_BOOK3S_64 */
diff --git a/arch/powerpc/kernel/mce.c b/arch/powerpc/kernel/mce.c
index 34c1001e9e8bf..8077b5fb18a79 100644
--- a/arch/powerpc/kernel/mce.c
+++ b/arch/powerpc/kernel/mce.c
@@ -15,6 +15,7 @@
 #include <linux/percpu.h>
 #include <linux/export.h>
 #include <linux/irq_work.h>
+#include <linux/extable.h>
 
 #include <asm/machdep.h>
 #include <asm/mce.h>
@@ -251,6 +252,19 @@ void machine_check_queue_event(void)
 	/* Queue irq work to process this event later. */
 	irq_work_queue(&mce_event_process_work);
 }
+
+void mce_common_process_ue(struct pt_regs *regs,
+			   struct mce_error_info *mce_err)
+{
+	const struct exception_table_entry *entry;
+
+	entry = search_kernel_exception_table(regs->nip);
+	if (entry) {
+		mce_err->ignore_event = true;
+		regs->nip = extable_fixup(entry);
+	}
+}
+
 /*
  * process pending MCE event from the mce event queue. This function will be
  * called during syscall exit.
diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
index 1cbf7f1a4e3d8..067b094bfeff5 100644
--- a/arch/powerpc/kernel/mce_power.c
+++ b/arch/powerpc/kernel/mce_power.c
@@ -579,14 +579,10 @@ static long mce_handle_ue_error(struct pt_regs *regs,
 				struct mce_error_info *mce_err)
 {
 	long handled = 0;
-	const struct exception_table_entry *entry;
 
-	entry = search_kernel_exception_table(regs->nip);
-	if (entry) {
-		mce_err->ignore_event = true;
-		regs->nip = extable_fixup(entry);
+	mce_common_process_ue(regs, mce_err);
+	if (mce_err->ignore_event)
 		return 1;
-	}
 
 	/*
 	 * On specific SCOM read via MMIO we may get a machine check
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 1d7f973c647b3..aa6208c8d4f09 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -558,6 +558,9 @@ static int mce_handle_error(struct pt_regs *regs, struct rtas_error_log *errp)
 	switch (mce_log->error_type) {
 	case MC_ERROR_TYPE_UE:
 		mce_err.error_type = MCE_ERROR_TYPE_UE;
+		mce_common_process_ue(regs, &mce_err);
+		if (mce_err.ignore_event)
+			disposition = RTAS_DISP_FULLY_RECOVERED;
 		switch (err_sub_type) {
 		case MC_ERROR_UE_IFETCH:
 			mce_err.u.ue_error_type = MCE_UE_ERROR_IFETCH;
-- 
2.20.1

[PATCH AUTOSEL 5.6 147/149] svcrdma: Fix leak of transport addresses

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 1a33d8a284b1e85e03b8c7b1ea8fb985fccd1d71 ]

Kernel memory leak detected:

unreferenced object 0xffff888849cdf480 (size 8):
  comm "kworker/u8:3", pid 2086, jiffies 4297898756 (age 4269.856s)
  hex dump (first 8 bytes):
    30 00 cd 49 88 88 ff ff                          0..I....
  backtrace:
    [<00000000acfc370b>] __kmalloc_track_caller+0x137/0x183
    [<00000000a2724354>] kstrdup+0x2b/0x43
    [<0000000082964f84>] xprt_rdma_format_addresses+0x114/0x17d [rpcrdma]
    [<00000000dfa6ed00>] xprt_setup_rdma_bc+0xc0/0x10c [rpcrdma]
    [<0000000073051a83>] xprt_create_transport+0x3f/0x1a0 [sunrpc]
    [<0000000053531a8e>] rpc_create+0x118/0x1cd [sunrpc]
    [<000000003a51b5f8>] setup_callback_client+0x1a5/0x27d [nfsd]
    [<000000001bd410af>] nfsd4_process_cb_update.isra.7+0x16c/0x1ac [nfsd]
    [<000000007f4bbd56>] nfsd4_run_cb_work+0x4c/0xbd [nfsd]
    [<0000000055c5586b>] process_one_work+0x1b2/0x2fe
    [<00000000b1e3e8ef>] worker_thread+0x1a6/0x25a
    [<000000005205fb78>] kthread+0xf6/0xfb
    [<000000006d2dc057>] ret_from_fork+0x3a/0x50

Introduce a call to xprt_rdma_free_addresses() similar to the way
that the TCP backchannel releases a transport's peer address
strings.

Fixes: 5d252f90a800 ("svcrdma: Add class for RDMA backwards direction transport")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
index 908e78bb87c64..c4fb930779a92 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
@@ -250,6 +250,7 @@ xprt_rdma_bc_put(struct rpc_xprt *xprt)
 {
 	dprintk("svcrdma: %s: xprt %p\n", __func__, xprt);
 
+	xprt_rdma_free_addresses(xprt);
 	xprt_free(xprt);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 148/149] rtc: imx-sc: Align imx sc msg structs to 4

[Sasha Levin]

From: Leonard Crestez <leonard.crestez@nxp.com>

[ Upstream commit a29de86521d8a80cb0b426638d4e38707cafa2e2 ]

The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.

This produces many oopses with CONFIG_KASAN=y.

Fix by marking with __aligned(4).

Fixes: a3094fc1a15e ("rtc: imx-sc: add rtc alarm support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Link: https://lore.kernel.org/r/13404bac8360852d86c61fad5ae5f0c91ffc4cb6.1582216144.git.leonard.crestez@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-imx-sc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-imx-sc.c b/drivers/rtc/rtc-imx-sc.c
index cf2c12107f2b8..a5f59e6f862e0 100644
--- a/drivers/rtc/rtc-imx-sc.c
+++ b/drivers/rtc/rtc-imx-sc.c
@@ -37,7 +37,7 @@ struct imx_sc_msg_timer_rtc_set_alarm {
 	u8 hour;
 	u8 min;
 	u8 sec;
-} __packed;
+} __packed __aligned(4);
 
 static int imx_sc_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-- 
2.20.1

[PATCH AUTOSEL 5.6 149/149] PCI: Use ioremap(), not phys_to_virt() for platform ROM

[Sasha Levin]

From: Mikel Rychliski <mikel@mikelr.com>

[ Upstream commit 72e0ef0e5f067fd991f702f0b2635d911d0cf208 ]

On some EFI systems, the video BIOS is provided by the EFI firmware.  The
boot stub code stores the physical address of the ROM image in pdev->rom.
Currently we attempt to access this pointer using phys_to_virt(), which
doesn't work with CONFIG_HIGHMEM.

On these systems, attempting to load the radeon module on a x86_32 kernel
can result in the following:

  BUG: unable to handle page fault for address: 3e8ed03c
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  *pde = 00000000
  Oops: 0000 [#1] PREEMPT SMP
  CPU: 0 PID: 317 Comm: systemd-udevd Not tainted 5.6.0-rc3-next-20200228 #2
  Hardware name: Apple Computer, Inc. MacPro1,1/Mac-F4208DC8, BIOS     MP11.88Z.005C.B08.0707021221 07/02/07
  EIP: radeon_get_bios+0x5ed/0xe50 [radeon]
  Code: 00 00 84 c0 0f 85 12 fd ff ff c7 87 64 01 00 00 00 00 00 00 8b 47 08 8b 55 b0 e8 1e 83 e1 d6 85 c0 74 1a 8b 55 c0 85 d2 74 13 <80> 38 55 75 0e 80 78 01 aa 0f 84 a4 03 00 00 8d 74 26 00 68 dc 06
  EAX: 3e8ed03c EBX: 00000000 ECX: 3e8ed03c EDX: 00010000
  ESI: 00040000 EDI: eec04000 EBP: eef3fc60 ESP: eef3fbe0
  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010206
  CR0: 80050033 CR2: 3e8ed03c CR3: 2ec77000 CR4: 000006d0
  Call Trace:
   r520_init+0x26/0x240 [radeon]
   radeon_device_init+0x533/0xa50 [radeon]
   radeon_driver_load_kms+0x80/0x220 [radeon]
   drm_dev_register+0xa7/0x180 [drm]
   radeon_pci_probe+0x10f/0x1a0 [radeon]
   pci_device_probe+0xd4/0x140

Fix the issue by updating all drivers which can access a platform provided
ROM. Instead of calling the helper function pci_platform_rom() which uses
phys_to_virt(), call ioremap() directly on the pdev->rom.

radeon_read_platform_bios() previously directly accessed an __iomem
pointer. Avoid this by calling memcpy_fromio() instead of kmemdup().

pci_platform_rom() now has no remaining callers, so remove it.

Link: https://lore.kernel.org/r/20200319021623.5426-1-mikel@mikelr.com
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c      | 31 +++++++++++--------
 .../drm/nouveau/nvkm/subdev/bios/shadowpci.c  | 17 ++++++++--
 drivers/gpu/drm/radeon/radeon_bios.c          | 30 +++++++++++-------
 drivers/pci/rom.c                             | 17 ----------
 include/linux/pci.h                           |  1 -
 5 files changed, 52 insertions(+), 44 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c
index 50dff69a0f6e3..b1172d93c99c3 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_bios.c
@@ -192,30 +192,35 @@ static bool amdgpu_read_bios_from_rom(struct amdgpu_device *adev)
 
 static bool amdgpu_read_platform_bios(struct amdgpu_device *adev)
 {
-	uint8_t __iomem *bios;
-	size_t size;
+	phys_addr_t rom = adev->pdev->rom;
+	size_t romlen = adev->pdev->romlen;
+	void __iomem *bios;
 
 	adev->bios = NULL;
 
-	bios = pci_platform_rom(adev->pdev, &size);
-	if (!bios) {
+	if (!rom || romlen == 0)
 		return false;
-	}
 
-	adev->bios = kzalloc(size, GFP_KERNEL);
-	if (adev->bios == NULL)
+	adev->bios = kzalloc(romlen, GFP_KERNEL);
+	if (!adev->bios)
 		return false;
 
-	memcpy_fromio(adev->bios, bios, size);
+	bios = ioremap(rom, romlen);
+	if (!bios)
+		goto free_bios;
 
-	if (!check_atom_bios(adev->bios, size)) {
-		kfree(adev->bios);
-		return false;
-	}
+	memcpy_fromio(adev->bios, bios, romlen);
+	iounmap(bios);
 
-	adev->bios_size = size;
+	if (!check_atom_bios(adev->bios, romlen))
+		goto free_bios;
+
+	adev->bios_size = romlen;
 
 	return true;
+free_bios:
+	kfree(adev->bios);
+	return false;
 }
 
 #ifdef CONFIG_ACPI
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowpci.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowpci.c
index 9b91da09dc5f8..8d9812a51ef63 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowpci.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowpci.c
@@ -101,9 +101,13 @@ platform_init(struct nvkm_bios *bios, const char *name)
 	else
 		return ERR_PTR(-ENODEV);
 
+	if (!pdev->rom || pdev->romlen == 0)
+		return ERR_PTR(-ENODEV);
+
 	if ((priv = kmalloc(sizeof(*priv), GFP_KERNEL))) {
+		priv->size = pdev->romlen;
 		if (ret = -ENODEV,
-		    (priv->rom = pci_platform_rom(pdev, &priv->size)))
+		    (priv->rom = ioremap(pdev->rom, pdev->romlen)))
 			return priv;
 		kfree(priv);
 	}
@@ -111,11 +115,20 @@ platform_init(struct nvkm_bios *bios, const char *name)
 	return ERR_PTR(ret);
 }
 
+static void
+platform_fini(void *data)
+{
+	struct priv *priv = data;
+
+	iounmap(priv->rom);
+	kfree(priv);
+}
+
 const struct nvbios_source
 nvbios_platform = {
 	.name = "PLATFORM",
 	.init = platform_init,
-	.fini = (void(*)(void *))kfree,
+	.fini = platform_fini,
 	.read = pcirom_read,
 	.rw = true,
 };
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index c42f73fad3e31..bb29cf02974d1 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -108,25 +108,33 @@ static bool radeon_read_bios(struct radeon_device *rdev)
 
 static bool radeon_read_platform_bios(struct radeon_device *rdev)
 {
-	uint8_t __iomem *bios;
-	size_t size;
+	phys_addr_t rom = rdev->pdev->rom;
+	size_t romlen = rdev->pdev->romlen;
+	void __iomem *bios;
 
 	rdev->bios = NULL;
 
-	bios = pci_platform_rom(rdev->pdev, &size);
-	if (!bios) {
+	if (!rom || romlen == 0)
 		return false;
-	}
 
-	if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) {
+	rdev->bios = kzalloc(romlen, GFP_KERNEL);
+	if (!rdev->bios)
 		return false;
-	}
-	rdev->bios = kmemdup(bios, size, GFP_KERNEL);
-	if (rdev->bios == NULL) {
-		return false;
-	}
+
+	bios = ioremap(rom, romlen);
+	if (!bios)
+		goto free_bios;
+
+	memcpy_fromio(rdev->bios, bios, romlen);
+	iounmap(bios);
+
+	if (rdev->bios[0] != 0x55 || rdev->bios[1] != 0xaa)
+		goto free_bios;
 
 	return true;
+free_bios:
+	kfree(rdev->bios);
+	return false;
 }
 
 #ifdef CONFIG_ACPI
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 137bf0cee897c..8fc9a4e911e3a 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -195,20 +195,3 @@ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom)
 		pci_disable_rom(pdev);
 }
 EXPORT_SYMBOL(pci_unmap_rom);
-
-/**
- * pci_platform_rom - provides a pointer to any ROM image provided by the
- * platform
- * @pdev: pointer to pci device struct
- * @size: pointer to receive size of pci window over ROM
- */
-void __iomem *pci_platform_rom(struct pci_dev *pdev, size_t *size)
-{
-	if (pdev->rom && pdev->romlen) {
-		*size = pdev->romlen;
-		return phys_to_virt((phys_addr_t)pdev->rom);
-	}
-
-	return NULL;
-}
-EXPORT_SYMBOL(pci_platform_rom);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 3840a541a9de5..7268dcf1f23e9 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1214,7 +1214,6 @@ int pci_enable_rom(struct pci_dev *pdev);
 void pci_disable_rom(struct pci_dev *pdev);
 void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
 void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
-void __iomem __must_check *pci_platform_rom(struct pci_dev *pdev, size_t *size);
 
 /* Power management related routines */
 int pci_save_state(struct pci_dev *dev);
-- 
2.20.1

Re: [PATCH AUTOSEL 5.6 053/149] net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278

[Florian Fainelli]

On 4/11/2020 4:02 PM, Sasha Levin wrote:
> From: Florian Fainelli <f.fainelli@gmail.com>
> 
> [ Upstream commit 7458bd540fa0a90220b9e8c349d910d9dde9caf8 ]
> 
> Either port 5 or port 8 can be used on a 7278 device, make sure that
> port 5 also gets configured properly for 2Gb/sec in that case.

This was later reverted with:

3f02735e5da5367e4cd563ce6e5c21ce27922248 ("Revert "net: dsa: bcm_sf2:
Also configure Port 5 for 2Gb/sec on 7278") please drop it from this
selection.
--
Florian

Re: [PATCH AUTOSEL 5.6 056/149] sh_eth: check sh_eth_cpu_data::no_xdfar when dumping registers

[Sergei Shtylyov]

Hello!

On 12.04.2020 2:02, Sasha Levin wrote:

> From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> [ Upstream commit 7bf47f609f7eaac4f7e9c407a85ad78997288a38 ]
> 
> When adding the sh_eth_cpu_data::no_xdfar flag I forgot to add the flag
> check to  __sh_eth_get_regs(), causing the non-existing RDFAR/TDFAR to be
> considered for dumping on the R-Car gen1/2 SoCs (the register offset check
> has the final say here)...
> 
> Fixes: 4c1d45850d5 ("sh_eth: add sh_eth_cpu_data::cexcr flag")

    Oops, wrong commit here, should've been:

Fixes: 6e80e55bd37a ("sh_eth: add sh_eth_cpu_data::no_xdfar flag")

Luckily, both commits appeared in the same version, 4.17. :-)

> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Tested-by: Chris Brandt <chris.brandt@renesas.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
[...]

MBR, Sergei

Re: [PATCH AUTOSEL 5.6 053/149] net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278

[Sasha Levin]

On Sat, Apr 11, 2020 at 06:16:49PM -0700, Florian Fainelli wrote:
>
>
>On 4/11/2020 4:02 PM, Sasha Levin wrote:
>> From: Florian Fainelli <f.fainelli@gmail.com>
>>
>> [ Upstream commit 7458bd540fa0a90220b9e8c349d910d9dde9caf8 ]
>>
>> Either port 5 or port 8 can be used on a 7278 device, make sure that
>> port 5 also gets configured properly for 2Gb/sec in that case.
>
>This was later reverted with:
>
>3f02735e5da5367e4cd563ce6e5c21ce27922248 ("Revert "net: dsa: bcm_sf2:
>Also configure Port 5 for 2Gb/sec on 7278") please drop it from this
>selection.

Dropped from all branches, thanks!

-- 
Thanks,
Sasha