* [PATCH 4.9 01/16] powerpc/64s: Define MASKABLE_RELON_EXCEPTION_PSERIES_OOL
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 02/16] powerpc/64s: move some exception handlers out of line Greg Kroah-Hartman
` (18 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Greg Kroah-Hartman, dja
From: Daniel Axtens <dja@axtens.net>
Commit da2bc4644c75 ("powerpc/64s: Add new exception vector macros")
adds:
+#define __TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec) \
+ TRAMP_REAL_BEGIN(tramp_virt_##name); \
+ MASKABLE_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common); \
However there's no reference there or anywhere else to
MASKABLE_RELON_EXCEPTION_PSERIES_OOL and an attempt to use it
unsurprisingly doesn't work.
Add a definition provided by mpe.
Fixes: da2bc4644c75 ("powerpc/64s: Add new exception vector macros")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/exception-64s.h | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -563,6 +563,10 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_NOTEST_HV, vec); \
EXCEPTION_PROLOG_PSERIES_1(label, EXC_HV)
+#define MASKABLE_RELON_EXCEPTION_PSERIES_OOL(vec, label) \
+ EXCEPTION_PROLOG_1(PACA_EXGEN, SOFTEN_NOTEST_PR, vec); \
+ EXCEPTION_PROLOG_PSERIES_1(label, EXC_STD)
+
/*
* Our exception common code can be passed various "additions"
* to specify the behaviour of interrupts, whether to kick the
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 02/16] powerpc/64s: move some exception handlers out of line
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 01/16] powerpc/64s: Define MASKABLE_RELON_EXCEPTION_PSERIES_OOL Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 03/16] powerpc/64s: flush L1D on kernel entry Greg Kroah-Hartman
` (17 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Greg Kroah-Hartman, dja
From: Daniel Axtens <dja@axtens.net>
(backport only)
We're about to grow the exception handlers, which will make a bunch of them
no longer fit within the space available. We move them out of line.
This is a fiddly and error-prone business, so in the interests of reviewability
I haven't merged this in with the addition of the entry flush.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/kernel/exceptions-64s.S | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -519,6 +519,10 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TY
EXC_REAL_BEGIN(data_access_slb, 0x380, 0x400)
SET_SCRATCH0(r13)
EXCEPTION_PROLOG_0(PACA_EXSLB)
+ b tramp_data_access_slb
+EXC_REAL_END(data_access_slb, 0x380, 0x400)
+
+TRAMP_REAL_BEGIN(tramp_data_access_slb)
EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x380)
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_DAR
@@ -537,7 +541,6 @@ EXC_REAL_BEGIN(data_access_slb, 0x380, 0
mtctr r10
bctr
#endif
-EXC_REAL_END(data_access_slb, 0x380, 0x400)
EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x4400)
SET_SCRATCH0(r13)
@@ -587,6 +590,10 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TY
EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x500)
SET_SCRATCH0(r13)
EXCEPTION_PROLOG_0(PACA_EXSLB)
+ b tramp_instruction_access_slb
+EXC_REAL_END(instruction_access_slb, 0x480, 0x500)
+
+TRAMP_REAL_BEGIN(tramp_instruction_access_slb)
EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x480)
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
@@ -600,7 +607,6 @@ EXC_REAL_BEGIN(instruction_access_slb, 0
mtctr r10
bctr
#endif
-EXC_REAL_END(instruction_access_slb, 0x480, 0x500)
EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x4500)
SET_SCRATCH0(r13)
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 03/16] powerpc/64s: flush L1D on kernel entry
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 01/16] powerpc/64s: Define MASKABLE_RELON_EXCEPTION_PSERIES_OOL Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 02/16] powerpc/64s: move some exception handlers out of line Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 04/16] powerpc: Add a framework for user access tracking Greg Kroah-Hartman
` (16 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Greg Kroah-Hartman, dja, Nicholas Piggin
From: Nicholas Piggin <npiggin@gmail.com>
commit f79643787e0a0762d2409b7b8334e83f22d85695 upstream.
IBM Power9 processors can speculatively operate on data in the L1 cache before
it has been completely validated, via a way-prediction mechanism. It is not possible
for an attacker to determine the contents of impermissible memory using this method,
since these systems implement a combination of hardware and software security measures
to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that the
attacker controls. This can be used for example to speculatively bypass "kernel
user access prevention" techniques, as discovered by Anthony Steinhauser of
Google's Safeside Project. This is not an attack by itself, but there is a possibility
it could be used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege boundaries
of concern. This patch flushes the L1 cache on kernel entry.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/kernel-parameters.txt | 3 +
arch/powerpc/include/asm/exception-64s.h | 9 +++-
arch/powerpc/include/asm/feature-fixups.h | 10 ++++
arch/powerpc/include/asm/security_features.h | 4 +
arch/powerpc/include/asm/setup.h | 3 +
arch/powerpc/kernel/exceptions-64s.S | 49 ++++++++++++++++++++--
arch/powerpc/kernel/setup_64.c | 58 +++++++++++++++++++++++++++
arch/powerpc/kernel/vmlinux.lds.S | 7 +++
arch/powerpc/lib/feature-fixups.c | 54 +++++++++++++++++++++++++
arch/powerpc/platforms/powernv/setup.c | 10 ++++
arch/powerpc/platforms/pseries/setup.c | 4 +
11 files changed, 205 insertions(+), 6 deletions(-)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2527,6 +2527,7 @@ bytes respectively. Such letter suffixes
mds=off [X86]
tsx_async_abort=off [X86]
kvm.nx_huge_pages=off [X86]
+ no_entry_flush [PPC]
Exceptions:
This does not have any effect on
@@ -2833,6 +2834,8 @@ bytes respectively. Such letter suffixes
noefi Disable EFI runtime services support.
+ no_entry_flush [PPC] Don't flush the L1-D cache when entering the kernel.
+
noexec [IA-64]
noexec [X86]
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -66,11 +66,18 @@
nop; \
nop
+#define ENTRY_FLUSH_SLOT \
+ ENTRY_FLUSH_FIXUP_SECTION; \
+ nop; \
+ nop; \
+ nop;
+
/*
* r10 must be free to use, r13 must be paca
*/
#define INTERRUPT_TO_KERNEL \
- STF_ENTRY_BARRIER_SLOT
+ STF_ENTRY_BARRIER_SLOT; \
+ ENTRY_FLUSH_SLOT
/*
* Macros for annotating the expected destination of (h)rfid
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -205,6 +205,14 @@ void setup_feature_keys(void);
FTR_ENTRY_OFFSET 955b-956b; \
.popsection;
+#define ENTRY_FLUSH_FIXUP_SECTION \
+957: \
+ .pushsection __entry_flush_fixup,"a"; \
+ .align 2; \
+958: \
+ FTR_ENTRY_OFFSET 957b-958b; \
+ .popsection;
+
#define RFI_FLUSH_FIXUP_SECTION \
951: \
.pushsection __rfi_flush_fixup,"a"; \
@@ -236,8 +244,10 @@ void setup_feature_keys(void);
#ifndef __ASSEMBLY__
extern long stf_barrier_fallback;
+extern long entry_flush_fallback;
extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup;
extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
+extern long __start___entry_flush_fixup, __stop___entry_flush_fixup;
extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;
extern long __start__btb_flush_fixup, __stop__btb_flush_fixup;
--- a/arch/powerpc/include/asm/security_features.h
+++ b/arch/powerpc/include/asm/security_features.h
@@ -84,12 +84,16 @@ static inline bool security_ftr_enabled(
// Software required to flush link stack on context switch
#define SEC_FTR_FLUSH_LINK_STACK 0x0000000000001000ull
+// The L1-D cache should be flushed when entering the kernel
+#define SEC_FTR_L1D_FLUSH_ENTRY 0x0000000000004000ull
+
// Features enabled by default
#define SEC_FTR_DEFAULT \
(SEC_FTR_L1D_FLUSH_HV | \
SEC_FTR_L1D_FLUSH_PR | \
SEC_FTR_BNDS_CHK_SPEC_BAR | \
+ SEC_FTR_L1D_FLUSH_ENTRY | \
SEC_FTR_FAVOUR_SECURITY)
#endif /* _ASM_POWERPC_SECURITY_FEATURES_H */
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -50,12 +50,15 @@ enum l1d_flush_type {
};
void setup_rfi_flush(enum l1d_flush_type, bool enable);
+void setup_entry_flush(bool enable);
+void setup_uaccess_flush(bool enable);
void do_rfi_flush_fixups(enum l1d_flush_type types);
#ifdef CONFIG_PPC_BARRIER_NOSPEC
void setup_barrier_nospec(void);
#else
static inline void setup_barrier_nospec(void) { };
#endif
+void do_entry_flush_fixups(enum l1d_flush_type types);
void do_barrier_nospec_fixups(bool enable);
extern bool barrier_nospec_enabled;
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -487,7 +487,7 @@ EXC_COMMON_BEGIN(unrecover_mce)
b 1b
-EXC_REAL(data_access, 0x300, 0x380)
+EXC_REAL_OOL(data_access, 0x300, 0x380)
EXC_VIRT(data_access, 0x4300, 0x4380, 0x300)
TRAMP_KVM_SKIP(PACA_EXGEN, 0x300)
@@ -567,7 +567,7 @@ EXC_VIRT_END(data_access_slb, 0x4380, 0x
TRAMP_KVM_SKIP(PACA_EXSLB, 0x380)
-EXC_REAL(instruction_access, 0x400, 0x480)
+EXC_REAL_OOL(instruction_access, 0x400, 0x480)
EXC_VIRT(instruction_access, 0x4400, 0x4480, 0x400)
TRAMP_KVM(PACA_EXGEN, 0x400)
@@ -857,13 +857,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
EXC_REAL_OOL_MASKABLE(decrementer, 0x900, 0x980)
-EXC_VIRT_MASKABLE(decrementer, 0x4900, 0x4980, 0x900)
+EXC_VIRT_OOL_MASKABLE(decrementer, 0x4900, 0x4980, 0x900)
TRAMP_KVM(PACA_EXGEN, 0x900)
EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt)
-EXC_REAL_HV(hdecrementer, 0x980, 0xa00)
-EXC_VIRT_HV(hdecrementer, 0x4980, 0x4a00, 0x980)
+EXC_REAL_OOL_HV(hdecrementer, 0x980, 0xa00)
+EXC_VIRT_OOL_HV(hdecrementer, 0x4980, 0x4a00, 0x980)
TRAMP_KVM_HV(PACA_EXGEN, 0x980)
EXC_COMMON(hdecrementer_common, 0x980, hdec_interrupt)
@@ -1706,6 +1706,45 @@ hrfi_flush_fallback:
GET_SCRATCH0(r13);
hrfid
+ .globl entry_flush_fallback
+entry_flush_fallback:
+ std r9,PACA_EXRFI+EX_R9(r13)
+ std r10,PACA_EXRFI+EX_R10(r13)
+ std r11,PACA_EXRFI+EX_R11(r13)
+ mfctr r9
+ ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
+ ld r11,PACA_L1D_FLUSH_SIZE(r13)
+ srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
+ mtctr r11
+ DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
+
+ /* order ld/st prior to dcbt stop all streams with flushing */
+ sync
+
+ /*
+ * The load addresses are at staggered offsets within cachelines,
+ * which suits some pipelines better (on others it should not
+ * hurt).
+ */
+1:
+ ld r11,(0x80 + 8)*0(r10)
+ ld r11,(0x80 + 8)*1(r10)
+ ld r11,(0x80 + 8)*2(r10)
+ ld r11,(0x80 + 8)*3(r10)
+ ld r11,(0x80 + 8)*4(r10)
+ ld r11,(0x80 + 8)*5(r10)
+ ld r11,(0x80 + 8)*6(r10)
+ ld r11,(0x80 + 8)*7(r10)
+ addi r10,r10,0x80*8
+ bdnz 1b
+
+ mtctr r9
+ ld r9,PACA_EXRFI+EX_R9(r13)
+ ld r10,PACA_EXRFI+EX_R10(r13)
+ ld r11,PACA_EXRFI+EX_R11(r13)
+ blr
+
+
/*
* Called from arch_local_irq_enable when an interrupt needs
* to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -685,7 +685,9 @@ early_initcall(disable_hardlockup_detect
static enum l1d_flush_type enabled_flush_types;
static void *l1d_flush_fallback_area;
static bool no_rfi_flush;
+static bool no_entry_flush;
bool rfi_flush;
+bool entry_flush;
static int __init handle_no_rfi_flush(char *p)
{
@@ -695,6 +697,14 @@ static int __init handle_no_rfi_flush(ch
}
early_param("no_rfi_flush", handle_no_rfi_flush);
+static int __init handle_no_entry_flush(char *p)
+{
+ pr_info("entry-flush: disabled on command line.");
+ no_entry_flush = true;
+ return 0;
+}
+early_param("no_entry_flush", handle_no_entry_flush);
+
/*
* The RFI flush is not KPTI, but because users will see doco that says to use
* nopti we hijack that option here to also disable the RFI flush.
@@ -726,6 +736,18 @@ void rfi_flush_enable(bool enable)
rfi_flush = enable;
}
+void entry_flush_enable(bool enable)
+{
+ if (enable) {
+ do_entry_flush_fixups(enabled_flush_types);
+ on_each_cpu(do_nothing, NULL, 1);
+ } else {
+ do_entry_flush_fixups(L1D_FLUSH_NONE);
+ }
+
+ entry_flush = enable;
+}
+
static void __ref init_fallback_flush(void)
{
u64 l1d_size, limit;
@@ -771,6 +793,15 @@ void setup_rfi_flush(enum l1d_flush_type
rfi_flush_enable(enable);
}
+void setup_entry_flush(bool enable)
+{
+ if (cpu_mitigations_off())
+ return;
+
+ if (!no_entry_flush)
+ entry_flush_enable(enable);
+}
+
#ifdef CONFIG_DEBUG_FS
static int rfi_flush_set(void *data, u64 val)
{
@@ -798,9 +829,36 @@ static int rfi_flush_get(void *data, u64
DEFINE_SIMPLE_ATTRIBUTE(fops_rfi_flush, rfi_flush_get, rfi_flush_set, "%llu\n");
+static int entry_flush_set(void *data, u64 val)
+{
+ bool enable;
+
+ if (val == 1)
+ enable = true;
+ else if (val == 0)
+ enable = false;
+ else
+ return -EINVAL;
+
+ /* Only do anything if we're changing state */
+ if (enable != entry_flush)
+ entry_flush_enable(enable);
+
+ return 0;
+}
+
+static int entry_flush_get(void *data, u64 *val)
+{
+ *val = entry_flush ? 1 : 0;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_entry_flush, entry_flush_get, entry_flush_set, "%llu\n");
+
static __init int rfi_flush_debugfs_init(void)
{
debugfs_create_file("rfi_flush", 0600, powerpc_debugfs_root, NULL, &fops_rfi_flush);
+ debugfs_create_file("entry_flush", 0600, powerpc_debugfs_root, NULL, &fops_entry_flush);
return 0;
}
device_initcall(rfi_flush_debugfs_init);
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -141,6 +141,13 @@ SECTIONS
}
. = ALIGN(8);
+ __entry_flush_fixup : AT(ADDR(__entry_flush_fixup) - LOAD_OFFSET) {
+ __start___entry_flush_fixup = .;
+ *(__entry_flush_fixup)
+ __stop___entry_flush_fixup = .;
+ }
+
+ . = ALIGN(8);
__stf_exit_barrier_fixup : AT(ADDR(__stf_exit_barrier_fixup) - LOAD_OFFSET) {
__start___stf_exit_barrier_fixup = .;
*(__stf_exit_barrier_fixup)
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -232,6 +232,60 @@ void do_stf_barrier_fixups(enum stf_barr
do_stf_exit_barrier_fixups(types);
}
+void do_entry_flush_fixups(enum l1d_flush_type types)
+{
+ unsigned int instrs[3], *dest;
+ long *start, *end;
+ int i;
+
+ start = PTRRELOC(&__start___entry_flush_fixup);
+ end = PTRRELOC(&__stop___entry_flush_fixup);
+
+ instrs[0] = 0x60000000; /* nop */
+ instrs[1] = 0x60000000; /* nop */
+ instrs[2] = 0x60000000; /* nop */
+
+ i = 0;
+ if (types == L1D_FLUSH_FALLBACK) {
+ instrs[i++] = 0x7d4802a6; /* mflr r10 */
+ instrs[i++] = 0x60000000; /* branch patched below */
+ instrs[i++] = 0x7d4803a6; /* mtlr r10 */
+ }
+
+ if (types & L1D_FLUSH_ORI) {
+ instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
+ instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/
+ }
+
+ if (types & L1D_FLUSH_MTTRIG)
+ instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */
+
+ for (i = 0; start < end; start++, i++) {
+ dest = (void *)start + *start;
+
+ pr_devel("patching dest %lx\n", (unsigned long)dest);
+
+ patch_instruction(dest, instrs[0]);
+
+ if (types == L1D_FLUSH_FALLBACK)
+ patch_branch((dest + 1), (unsigned long)&entry_flush_fallback,
+ BRANCH_SET_LINK);
+ else
+ patch_instruction((dest + 1), instrs[1]);
+
+ patch_instruction((dest + 2), instrs[2]);
+ }
+
+ printk(KERN_DEBUG "entry-flush: patched %d locations (%s flush)\n", i,
+ (types == L1D_FLUSH_NONE) ? "no" :
+ (types == L1D_FLUSH_FALLBACK) ? "fallback displacement" :
+ (types & L1D_FLUSH_ORI) ? (types & L1D_FLUSH_MTTRIG)
+ ? "ori+mttrig type"
+ : "ori type" :
+ (types & L1D_FLUSH_MTTRIG) ? "mttrig type"
+ : "unknown");
+}
+
void do_rfi_flush_fixups(enum l1d_flush_type types)
{
unsigned int instrs[3], *dest;
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -124,12 +124,22 @@ static void pnv_setup_rfi_flush(void)
type = L1D_FLUSH_ORI;
}
+ /*
+ * 4.9 doesn't support Power9 bare metal, so we don't need to flush
+ * here - the flush fixes a P9 specific vulnerability.
+ */
+ security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
+
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
(security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || \
security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV));
setup_rfi_flush(type, enable);
setup_count_cache_flush();
+
+ enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+ security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
+ setup_entry_flush(enable);
}
static void __init pnv_setup_arch(void)
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -535,6 +535,10 @@ void pseries_setup_rfi_flush(void)
setup_rfi_flush(types, enable);
setup_count_cache_flush();
+
+ enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+ security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
+ setup_entry_flush(enable);
}
static void __init pSeries_setup_arch(void)
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 04/16] powerpc: Add a framework for user access tracking
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 03/16] powerpc/64s: flush L1D on kernel entry Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 05/16] powerpc: Implement user_access_begin and friends Greg Kroah-Hartman
` (15 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, dja, Christophe Leroy, Russell Currey,
Michael Ellerman
From: Christophe Leroy <christophe.leroy@c-s.fr>
Backported from commit de78a9c42a79 ("powerpc: Add a framework
for Kernel Userspace Access Protection"). Here we don't try to
add the KUAP framework, we just want the helper functions
because we want to put uaccess flush helpers in them.
In terms of fixes, we don't need commit 1d8f739b07bd ("powerpc/kuap:
Fix set direction in allow/prevent_user_access()") as we don't have
real KUAP. Likewise as all our allows are noops and all our prevents
are just flushes, we don't need commit 9dc086f1e9ef ("powerpc/futex:
Fix incorrect user access blocking") The other 2 fixes we do need.
The original description is:
This patch implements a framework for Kernel Userspace Access
Protection.
Then subarches will have the possibility to provide their own
implementation by providing setup_kuap() and
allow/prevent_user_access().
Some platforms will need to know the area accessed and whether it is
accessed from read, write or both. Therefore source, destination and
size and handed over to the two functions.
mpe: Rename to allow/prevent rather than unlock/lock, and add
read/write wrappers. Drop the 32-bit code for now until we have an
implementation for it. Add kuap to pt_regs for 64-bit as well as
32-bit. Don't split strings, use pr_crit_ratelimited().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/futex.h | 4 +++
arch/powerpc/include/asm/kup.h | 36 ++++++++++++++++++++++++++++++++
arch/powerpc/include/asm/uaccess.h | 39 ++++++++++++++++++++++++++---------
arch/powerpc/lib/checksum_wrappers.c | 4 +++
4 files changed, 74 insertions(+), 9 deletions(-)
create mode 100644 arch/powerpc/include/asm/kup.h
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -36,6 +36,7 @@ static inline int arch_futex_atomic_op_i
{
int oldval = 0, ret;
+ allow_write_to_user(uaddr, sizeof(*uaddr));
pagefault_disable();
switch (op) {
@@ -62,6 +63,7 @@ static inline int arch_futex_atomic_op_i
*oval = oldval;
+ prevent_write_to_user(uaddr, sizeof(*uaddr));
return ret;
}
@@ -75,6 +77,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval,
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
return -EFAULT;
+ allow_write_to_user(uaddr, sizeof(*uaddr));
__asm__ __volatile__ (
PPC_ATOMIC_ENTRY_BARRIER
"1: lwarx %1,0,%3 # futex_atomic_cmpxchg_inatomic\n\
@@ -97,6 +100,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval,
: "cc", "memory");
*uval = prev;
+ prevent_write_to_user(uaddr, sizeof(*uaddr));
return ret;
}
--- /dev/null
+++ b/arch/powerpc/include/asm/kup.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_KUP_H_
+#define _ASM_POWERPC_KUP_H_
+
+#ifndef __ASSEMBLY__
+
+#include <asm/pgtable.h>
+
+static inline void allow_user_access(void __user *to, const void __user *from,
+ unsigned long size) { }
+static inline void prevent_user_access(void __user *to, const void __user *from,
+ unsigned long size) { }
+
+static inline void allow_read_from_user(const void __user *from, unsigned long size)
+{
+ allow_user_access(NULL, from, size);
+}
+
+static inline void allow_write_to_user(void __user *to, unsigned long size)
+{
+ allow_user_access(to, NULL, size);
+}
+
+static inline void prevent_read_from_user(const void __user *from, unsigned long size)
+{
+ prevent_user_access(NULL, from, size);
+}
+
+static inline void prevent_write_to_user(void __user *to, unsigned long size)
+{
+ prevent_user_access(to, NULL, size);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_KUP_H_ */
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -9,6 +9,7 @@
#include <asm/asm-compat.h>
#include <asm/processor.h>
#include <asm/page.h>
+#include <asm/kup.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
@@ -164,6 +165,7 @@ extern long __put_user_bad(void);
#define __put_user_size(x, ptr, size, retval) \
do { \
retval = 0; \
+ allow_write_to_user(ptr, size); \
switch (size) { \
case 1: __put_user_asm(x, ptr, retval, "stb"); break; \
case 2: __put_user_asm(x, ptr, retval, "sth"); break; \
@@ -171,6 +173,7 @@ do { \
case 8: __put_user_asm2(x, ptr, retval); break; \
default: __put_user_bad(); \
} \
+ prevent_write_to_user(ptr, size); \
} while (0)
#define __put_user_nocheck(x, ptr, size) \
@@ -252,6 +255,7 @@ do { \
__chk_user_ptr(ptr); \
if (size > sizeof(x)) \
(x) = __get_user_bad(); \
+ allow_read_from_user(ptr, size); \
switch (size) { \
case 1: __get_user_asm(x, ptr, retval, "lbz"); break; \
case 2: __get_user_asm(x, ptr, retval, "lhz"); break; \
@@ -259,6 +263,7 @@ do { \
case 8: __get_user_asm2(x, ptr, retval); break; \
default: (x) = __get_user_bad(); \
} \
+ prevent_read_from_user(ptr, size); \
} while (0)
#define __get_user_nocheck(x, ptr, size) \
@@ -312,9 +317,14 @@ extern unsigned long __copy_tofrom_user(
static inline unsigned long copy_from_user(void *to,
const void __user *from, unsigned long n)
{
+ unsigned long ret;
+
if (likely(access_ok(VERIFY_READ, from, n))) {
check_object_size(to, n, false);
- return __copy_tofrom_user((__force void __user *)to, from, n);
+ allow_user_access(to, from, n);
+ ret = __copy_tofrom_user((__force void __user *)to, from, n);
+ prevent_user_access(to, from, n);
+ return ret;
}
memset(to, 0, n);
return n;
@@ -347,8 +357,9 @@ extern unsigned long copy_in_user(void _
static inline unsigned long __copy_from_user_inatomic(void *to,
const void __user *from, unsigned long n)
{
+ unsigned long ret;
if (__builtin_constant_p(n) && (n <= 8)) {
- unsigned long ret = 1;
+ ret = 1;
switch (n) {
case 1:
@@ -375,14 +386,18 @@ static inline unsigned long __copy_from_
check_object_size(to, n, false);
barrier_nospec();
- return __copy_tofrom_user((__force void __user *)to, from, n);
+ allow_read_from_user(from, n);
+ ret = __copy_tofrom_user((__force void __user *)to, from, n);
+ prevent_read_from_user(from, n);
+ return ret;
}
static inline unsigned long __copy_to_user_inatomic(void __user *to,
const void *from, unsigned long n)
{
+ unsigned long ret;
if (__builtin_constant_p(n) && (n <= 8)) {
- unsigned long ret = 1;
+ ret = 1;
switch (n) {
case 1:
@@ -403,8 +418,10 @@ static inline unsigned long __copy_to_us
}
check_object_size(from, n, true);
-
- return __copy_tofrom_user(to, (__force const void __user *)from, n);
+ allow_write_to_user(to, n);
+ ret = __copy_tofrom_user(to, (__force const void __user *)from, n);
+ prevent_write_to_user(to, n);
+ return ret;
}
static inline unsigned long __copy_from_user(void *to,
@@ -425,10 +442,14 @@ extern unsigned long __clear_user(void _
static inline unsigned long clear_user(void __user *addr, unsigned long size)
{
+ unsigned long ret = size;
might_fault();
- if (likely(access_ok(VERIFY_WRITE, addr, size)))
- return __clear_user(addr, size);
- return size;
+ if (likely(access_ok(VERIFY_WRITE, addr, size))) {
+ allow_write_to_user(addr, size);
+ ret = __clear_user(addr, size);
+ prevent_write_to_user(addr, size);
+ }
+ return ret;
}
extern long strncpy_from_user(char *dst, const char __user *src, long count);
--- a/arch/powerpc/lib/checksum_wrappers.c
+++ b/arch/powerpc/lib/checksum_wrappers.c
@@ -29,6 +29,7 @@ __wsum csum_and_copy_from_user(const voi
unsigned int csum;
might_sleep();
+ allow_read_from_user(src, len);
*err_ptr = 0;
@@ -60,6 +61,7 @@ __wsum csum_and_copy_from_user(const voi
}
out:
+ prevent_read_from_user(src, len);
return (__force __wsum)csum;
}
EXPORT_SYMBOL(csum_and_copy_from_user);
@@ -70,6 +72,7 @@ __wsum csum_and_copy_to_user(const void
unsigned int csum;
might_sleep();
+ allow_write_to_user(dst, len);
*err_ptr = 0;
@@ -97,6 +100,7 @@ __wsum csum_and_copy_to_user(const void
}
out:
+ prevent_write_to_user(dst, len);
return (__force __wsum)csum;
}
EXPORT_SYMBOL(csum_and_copy_to_user);
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 05/16] powerpc: Implement user_access_begin and friends
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 04/16] powerpc: Add a framework for user access tracking Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 06/16] powerpc: Fix __clear_user() with KUAP enabled Greg Kroah-Hartman
` (14 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, dja, Christophe Leroy, Michael Ellerman
From: Christophe Leroy <christophe.leroy@c-s.fr>
commit 5cd623333e7cf4e3a334c70529268b65f2a6c2c7 upstream.
Today, when a function like strncpy_from_user() is called,
the userspace access protection is de-activated and re-activated
for every word read.
By implementing user_access_begin and friends, the protection
is de-activated at the beginning of the copy and re-activated at the
end.
Implement user_access_begin(), user_access_end() and
unsafe_get_user(), unsafe_put_user() and unsafe_copy_to_user()
For the time being, we keep user_access_save() and
user_access_restore() as nops.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/36d4fbf9e56a75994aca4ee2214c77b26a5a8d35.1579866752.git.christophe.leroy@c-s.fr
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/uaccess.h | 60 ++++++++++++++++++++++++++++---------
1 file changed, 46 insertions(+), 14 deletions(-)
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -106,9 +106,14 @@ struct exception_table_entry {
__put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
#define __get_user(x, ptr) \
- __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+ __get_user_nocheck((x), (ptr), sizeof(*(ptr)), true)
#define __put_user(x, ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+ __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)), true)
+
+#define __get_user_allowed(x, ptr) \
+ __get_user_nocheck((x), (ptr), sizeof(*(ptr)), false)
+#define __put_user_allowed(x, ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)), false)
#define __get_user_inatomic(x, ptr) \
__get_user_nosleep((x), (ptr), sizeof(*(ptr)))
@@ -162,10 +167,9 @@ extern long __put_user_bad(void);
: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
#endif /* __powerpc64__ */
-#define __put_user_size(x, ptr, size, retval) \
+#define __put_user_size_allowed(x, ptr, size, retval) \
do { \
retval = 0; \
- allow_write_to_user(ptr, size); \
switch (size) { \
case 1: __put_user_asm(x, ptr, retval, "stb"); break; \
case 2: __put_user_asm(x, ptr, retval, "sth"); break; \
@@ -173,17 +177,26 @@ do { \
case 8: __put_user_asm2(x, ptr, retval); break; \
default: __put_user_bad(); \
} \
+} while (0)
+
+#define __put_user_size(x, ptr, size, retval) \
+do { \
+ allow_write_to_user(ptr, size); \
+ __put_user_size_allowed(x, ptr, size, retval); \
prevent_write_to_user(ptr, size); \
} while (0)
-#define __put_user_nocheck(x, ptr, size) \
+#define __put_user_nocheck(x, ptr, size, do_allow) \
({ \
long __pu_err; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
if (!is_kernel_addr((unsigned long)__pu_addr)) \
might_fault(); \
__chk_user_ptr(ptr); \
- __put_user_size((x), __pu_addr, (size), __pu_err); \
+ if (do_allow) \
+ __put_user_size((x), __pu_addr, (size), __pu_err); \
+ else \
+ __put_user_size_allowed((x), __pu_addr, (size), __pu_err); \
__pu_err; \
})
@@ -249,13 +262,12 @@ extern long __get_user_bad(void);
: "b" (addr), "i" (-EFAULT), "0" (err))
#endif /* __powerpc64__ */
-#define __get_user_size(x, ptr, size, retval) \
+#define __get_user_size_allowed(x, ptr, size, retval) \
do { \
retval = 0; \
__chk_user_ptr(ptr); \
if (size > sizeof(x)) \
(x) = __get_user_bad(); \
- allow_read_from_user(ptr, size); \
switch (size) { \
case 1: __get_user_asm(x, ptr, retval, "lbz"); break; \
case 2: __get_user_asm(x, ptr, retval, "lhz"); break; \
@@ -263,10 +275,16 @@ do { \
case 8: __get_user_asm2(x, ptr, retval); break; \
default: (x) = __get_user_bad(); \
} \
+} while (0)
+
+#define __get_user_size(x, ptr, size, retval) \
+do { \
+ allow_read_from_user(ptr, size); \
+ __get_user_size_allowed(x, ptr, size, retval); \
prevent_read_from_user(ptr, size); \
} while (0)
-#define __get_user_nocheck(x, ptr, size) \
+#define __get_user_nocheck(x, ptr, size, do_allow) \
({ \
long __gu_err; \
unsigned long __gu_val; \
@@ -275,7 +293,10 @@ do { \
if (!is_kernel_addr((unsigned long)__gu_addr)) \
might_fault(); \
barrier_nospec(); \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+ if (do_allow) \
+ __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+ else \
+ __get_user_size_allowed(__gu_val, __gu_addr, (size), __gu_err); \
(x) = (__typeof__(*(ptr)))__gu_val; \
__gu_err; \
})
@@ -396,21 +417,22 @@ static inline unsigned long __copy_to_us
const void *from, unsigned long n)
{
unsigned long ret;
+
if (__builtin_constant_p(n) && (n <= 8)) {
ret = 1;
switch (n) {
case 1:
- __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret);
+ __put_user_size_allowed(*(u8 *)from, (u8 __user *)to, 1, ret);
break;
case 2:
- __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret);
+ __put_user_size_allowed(*(u16 *)from, (u16 __user *)to, 2, ret);
break;
case 4:
- __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret);
+ __put_user_size_allowed(*(u32 *)from, (u32 __user *)to, 4, ret);
break;
case 8:
- __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret);
+ __put_user_size_allowed(*(u64 *)from, (u64 __user *)to, 8, ret);
break;
}
if (ret == 0)
@@ -456,6 +478,16 @@ extern long strncpy_from_user(char *dst,
extern __must_check long strlen_user(const char __user *str);
extern __must_check long strnlen_user(const char __user *str, long n);
+
+#define user_access_begin() do { } while (0)
+#define user_access_end() prevent_user_access(NULL, NULL, ~0ul)
+
+#define unsafe_op_wrap(op, err) do { if (unlikely(op)) goto err; } while (0)
+#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
+#define unsafe_put_user(x, p, e) unsafe_op_wrap(__put_user_allowed(x, p), e)
+#define unsafe_copy_to_user(d, s, l, e) \
+ unsafe_op_wrap(__copy_to_user_inatomic(d, s, l), e)
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 06/16] powerpc: Fix __clear_user() with KUAP enabled
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 05/16] powerpc: Implement user_access_begin and friends Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 07/16] powerpc/uaccess: Evaluate macro arguments once, before user access is allowed Greg Kroah-Hartman
` (13 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, dja, syzbot+f25ecf4b2982d8c7a640,
Michael Ellerman, Andrew Donnellan
From: Andrew Donnellan <ajd@linux.ibm.com>
commit 61e3acd8c693a14fc69b824cb5b08d02cb90a6e7 upstream.
The KUAP implementation adds calls in clear_user() to enable and
disable access to userspace memory. However, it doesn't add these to
__clear_user(), which is used in the ptrace regset code.
As there's only one direct user of __clear_user() (the regset code),
and the time taken to set the AMR for KUAP purposes is going to
dominate the cost of a quick access_ok(), there's not much point
having a separate path.
Rename __clear_user() to __arch_clear_user(), and make __clear_user()
just call clear_user().
Reported-by: syzbot+f25ecf4b2982d8c7a640@syzkaller-ppc64.appspotmail.com
Reported-by: Daniel Axtens <dja@axtens.net>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Use __arch_clear_user() for the asm version like arm64 & nds32]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191209132221.15328-1-ajd@linux.ibm.com
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/uaccess.h | 9 +++++++--
arch/powerpc/lib/string.S | 4 ++--
arch/powerpc/lib/string_64.S | 6 +++---
3 files changed, 12 insertions(+), 7 deletions(-)
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -460,7 +460,7 @@ static inline unsigned long __copy_to_us
return __copy_to_user_inatomic(to, from, size);
}
-extern unsigned long __clear_user(void __user *addr, unsigned long size);
+unsigned long __arch_clear_user(void __user *addr, unsigned long size);
static inline unsigned long clear_user(void __user *addr, unsigned long size)
{
@@ -468,12 +468,17 @@ static inline unsigned long clear_user(v
might_fault();
if (likely(access_ok(VERIFY_WRITE, addr, size))) {
allow_write_to_user(addr, size);
- ret = __clear_user(addr, size);
+ ret = __arch_clear_user(addr, size);
prevent_write_to_user(addr, size);
}
return ret;
}
+static inline unsigned long __clear_user(void __user *addr, unsigned long size)
+{
+ return clear_user(addr, size);
+}
+
extern long strncpy_from_user(char *dst, const char __user *src, long count);
extern __must_check long strlen_user(const char __user *str);
extern __must_check long strnlen_user(const char __user *str, long n);
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -89,7 +89,7 @@ _GLOBAL(memchr)
EXPORT_SYMBOL(memchr)
#ifdef CONFIG_PPC32
-_GLOBAL(__clear_user)
+_GLOBAL(__arch_clear_user)
addi r6,r3,-4
li r3,0
li r5,0
@@ -130,5 +130,5 @@ _GLOBAL(__clear_user)
PPC_LONG 1b,91b
PPC_LONG 8b,92b
.text
-EXPORT_SYMBOL(__clear_user)
+EXPORT_SYMBOL(__arch_clear_user)
#endif
--- a/arch/powerpc/lib/string_64.S
+++ b/arch/powerpc/lib/string_64.S
@@ -28,7 +28,7 @@ PPC64_CACHES:
.section ".text"
/**
- * __clear_user: - Zero a block of memory in user space, with less checking.
+ * __arch_clear_user: - Zero a block of memory in user space, with less checking.
* @to: Destination address, in user space.
* @n: Number of bytes to zero.
*
@@ -78,7 +78,7 @@ err3; stb r0,0(r3)
mr r3,r4
blr
-_GLOBAL_TOC(__clear_user)
+_GLOBAL_TOC(__arch_clear_user)
cmpdi r4,32
neg r6,r3
li r0,0
@@ -201,4 +201,4 @@ err1; dcbz 0,r3
cmpdi r4,32
blt .Lshort_clear
b .Lmedium_clear
-EXPORT_SYMBOL(__clear_user)
+EXPORT_SYMBOL(__arch_clear_user)
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 07/16] powerpc/uaccess: Evaluate macro arguments once, before user access is allowed
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 06/16] powerpc: Fix __clear_user() with KUAP enabled Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 08/16] powerpc/64s: flush L1D after user accesses Greg Kroah-Hartman
` (12 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Greg Kroah-Hartman, dja, Nicholas Piggin, Michael Ellerman
From: Nicholas Piggin <npiggin@gmail.com>
commit d02f6b7dab8228487268298ea1f21081c0b4b3eb upstream.
get/put_user() can be called with nontrivial arguments. fs/proc/page.c
has a good example:
if (put_user(stable_page_flags(ppage), out)) {
stable_page_flags() is quite a lot of code, including spin locks in
the page allocator.
Ensure these arguments are evaluated before user access is allowed.
This improves security by reducing code with access to userspace, but
it also fixes a PREEMPT bug with KUAP on powerpc/64s:
stable_page_flags() is currently called with AMR set to allow writes,
it ends up calling spin_unlock(), which can call preempt_schedule. But
the task switch code can not be called with AMR set (it relies on
interrupts saving the register), so this blows up.
It's fine if the code inside allow_user_access() is preemptible,
because a timer or IPI will save the AMR, but it's not okay to
explicitly cause a reschedule.
Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200407041245.600651-1-npiggin@gmail.com
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/uaccess.h | 49 ++++++++++++++++++++++++++-----------
1 file changed, 35 insertions(+), 14 deletions(-)
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -190,13 +190,17 @@ do { \
({ \
long __pu_err; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ __typeof__(size) __pu_size = (size); \
+ \
if (!is_kernel_addr((unsigned long)__pu_addr)) \
might_fault(); \
- __chk_user_ptr(ptr); \
+ __chk_user_ptr(__pu_addr); \
if (do_allow) \
- __put_user_size((x), __pu_addr, (size), __pu_err); \
+ __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \
else \
- __put_user_size_allowed((x), __pu_addr, (size), __pu_err); \
+ __put_user_size_allowed(__pu_val, __pu_addr, __pu_size, __pu_err); \
+ \
__pu_err; \
})
@@ -204,9 +208,13 @@ do { \
({ \
long __pu_err = -EFAULT; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ __typeof__(size) __pu_size = (size); \
+ \
might_fault(); \
- if (access_ok(VERIFY_WRITE, __pu_addr, size)) \
- __put_user_size((x), __pu_addr, (size), __pu_err); \
+ if (access_ok(VERIFY_WRITE, __pu_addr, __pu_size)) \
+ __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \
+ \
__pu_err; \
})
@@ -214,8 +222,12 @@ do { \
({ \
long __pu_err; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- __chk_user_ptr(ptr); \
- __put_user_size((x), __pu_addr, (size), __pu_err); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ __typeof__(size) __pu_size = (size); \
+ \
+ __chk_user_ptr(__pu_addr); \
+ __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \
+ \
__pu_err; \
})
@@ -289,15 +301,18 @@ do { \
long __gu_err; \
unsigned long __gu_val; \
__typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- __chk_user_ptr(ptr); \
+ __typeof__(size) __gu_size = (size); \
+ \
+ __chk_user_ptr(__gu_addr); \
if (!is_kernel_addr((unsigned long)__gu_addr)) \
might_fault(); \
barrier_nospec(); \
if (do_allow) \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+ __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
else \
- __get_user_size_allowed(__gu_val, __gu_addr, (size), __gu_err); \
+ __get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \
(x) = (__typeof__(*(ptr)))__gu_val; \
+ \
__gu_err; \
})
@@ -306,12 +321,15 @@ do { \
long __gu_err = -EFAULT; \
unsigned long __gu_val = 0; \
__typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ __typeof__(size) __gu_size = (size); \
+ \
might_fault(); \
- if (access_ok(VERIFY_READ, __gu_addr, (size))) { \
+ if (access_ok(VERIFY_READ, __gu_addr, __gu_size)) { \
barrier_nospec(); \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+ __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
} \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
+ \
__gu_err; \
})
@@ -320,10 +338,13 @@ do { \
long __gu_err; \
unsigned long __gu_val; \
__typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- __chk_user_ptr(ptr); \
+ __typeof__(size) __gu_size = (size); \
+ \
+ __chk_user_ptr(__gu_addr); \
barrier_nospec(); \
- __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
+ __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
+ \
__gu_err; \
})
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 08/16] powerpc/64s: flush L1D after user accesses
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 07/16] powerpc/uaccess: Evaluate macro arguments once, before user access is allowed Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 09/16] i2c: imx: use clk notifier for rate changes Greg Kroah-Hartman
` (11 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Greg Kroah-Hartman, dja, Nicholas Piggin
From: Nicholas Piggin <npiggin@gmail.com>
commit 9a32a7e78bd0cd9a9b6332cbdc345ee5ffd0c5de upstream.
IBM Power9 processors can speculatively operate on data in the L1 cache before
it has been completely validated, via a way-prediction mechanism. It is not possible
for an attacker to determine the contents of impermissible memory using this method,
since these systems implement a combination of hardware and software security measures
to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that the
attacker controls. This can be used for example to speculatively bypass "kernel
user access prevention" techniques, as discovered by Anthony Steinhauser of
Google's Safeside Project. This is not an attack by itself, but there is a possibility
it could be used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege boundaries
of concern. This patch flushes the L1 cache after user accesses.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/kernel-parameters.txt | 4
arch/powerpc/include/asm/book3s/64/kup-radix.h | 22 ++++
arch/powerpc/include/asm/feature-fixups.h | 9 +
arch/powerpc/include/asm/kup.h | 4
arch/powerpc/include/asm/security_features.h | 3
arch/powerpc/include/asm/setup.h | 1
arch/powerpc/kernel/exceptions-64s.S | 123 +++++++++----------------
arch/powerpc/kernel/setup_64.c | 62 ++++++++++++
arch/powerpc/kernel/vmlinux.lds.S | 7 +
arch/powerpc/lib/feature-fixups.c | 50 ++++++++++
arch/powerpc/platforms/powernv/setup.c | 7 +
arch/powerpc/platforms/pseries/setup.c | 4
12 files changed, 217 insertions(+), 79 deletions(-)
create mode 100644 arch/powerpc/include/asm/book3s/64/kup-radix.h
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2528,6 +2528,7 @@ bytes respectively. Such letter suffixes
tsx_async_abort=off [X86]
kvm.nx_huge_pages=off [X86]
no_entry_flush [PPC]
+ no_uaccess_flush [PPC]
Exceptions:
This does not have any effect on
@@ -2885,6 +2886,9 @@ bytes respectively. Such letter suffixes
nospec_store_bypass_disable
[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+ no_uaccess_flush
+ [PPC] Don't flush the L1-D cache after accessing user data.
+
noxsave [BUGS=X86] Disables x86 extended register state save
and restore using xsave. The kernel will fallback to
enabling legacy floating-point and sse state.
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H
+#define _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H
+
+DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
+
+/* Prototype for function defined in exceptions-64s.S */
+void do_uaccess_flush(void);
+
+static __always_inline void allow_user_access(void __user *to, const void __user *from,
+ unsigned long size)
+{
+}
+
+static inline void prevent_user_access(void __user *to, const void __user *from,
+ unsigned long size)
+{
+ if (static_branch_unlikely(&uaccess_flush_key))
+ do_uaccess_flush();
+}
+
+#endif /* _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H */
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -205,6 +205,14 @@ void setup_feature_keys(void);
FTR_ENTRY_OFFSET 955b-956b; \
.popsection;
+#define UACCESS_FLUSH_FIXUP_SECTION \
+959: \
+ .pushsection __uaccess_flush_fixup,"a"; \
+ .align 2; \
+960: \
+ FTR_ENTRY_OFFSET 959b-960b; \
+ .popsection;
+
#define ENTRY_FLUSH_FIXUP_SECTION \
957: \
.pushsection __entry_flush_fixup,"a"; \
@@ -247,6 +255,7 @@ extern long stf_barrier_fallback;
extern long entry_flush_fallback;
extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup;
extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
+extern long __start___uaccess_flush_fixup, __stop___uaccess_flush_fixup;
extern long __start___entry_flush_fixup, __stop___entry_flush_fixup;
extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;
--- a/arch/powerpc/include/asm/kup.h
+++ b/arch/powerpc/include/asm/kup.h
@@ -6,10 +6,14 @@
#include <asm/pgtable.h>
+#ifdef CONFIG_PPC_BOOK3S_64
+#include <asm/book3s/64/kup-radix.h>
+#else
static inline void allow_user_access(void __user *to, const void __user *from,
unsigned long size) { }
static inline void prevent_user_access(void __user *to, const void __user *from,
unsigned long size) { }
+#endif /* CONFIG_PPC_BOOK3S_64 */
static inline void allow_read_from_user(const void __user *from, unsigned long size)
{
--- a/arch/powerpc/include/asm/security_features.h
+++ b/arch/powerpc/include/asm/security_features.h
@@ -87,6 +87,8 @@ static inline bool security_ftr_enabled(
// The L1-D cache should be flushed when entering the kernel
#define SEC_FTR_L1D_FLUSH_ENTRY 0x0000000000004000ull
+// The L1-D cache should be flushed after user accesses from the kernel
+#define SEC_FTR_L1D_FLUSH_UACCESS 0x0000000000008000ull
// Features enabled by default
#define SEC_FTR_DEFAULT \
@@ -94,6 +96,7 @@ static inline bool security_ftr_enabled(
SEC_FTR_L1D_FLUSH_PR | \
SEC_FTR_BNDS_CHK_SPEC_BAR | \
SEC_FTR_L1D_FLUSH_ENTRY | \
+ SEC_FTR_L1D_FLUSH_UACCESS | \
SEC_FTR_FAVOUR_SECURITY)
#endif /* _ASM_POWERPC_SECURITY_FEATURES_H */
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -58,6 +58,7 @@ void setup_barrier_nospec(void);
#else
static inline void setup_barrier_nospec(void) { };
#endif
+void do_uaccess_flush_fixups(enum l1d_flush_type types);
void do_entry_flush_fixups(enum l1d_flush_type types);
void do_barrier_nospec_fixups(bool enable);
extern bool barrier_nospec_enabled;
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1377,6 +1377,48 @@ TRAMP_REAL_BEGIN(stf_barrier_fallback)
.endr
blr
+/* Clobbers r10, r11, ctr */
+.macro L1D_DISPLACEMENT_FLUSH
+ ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
+ ld r11,PACA_L1D_FLUSH_SIZE(r13)
+ srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
+ mtctr r11
+ DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
+
+ /* order ld/st prior to dcbt stop all streams with flushing */
+ sync
+
+ /*
+ * The load adresses are at staggered offsets within cachelines,
+ * which suits some pipelines better (on others it should not
+ * hurt).
+ */
+1:
+ ld r11,(0x80 + 8)*0(r10)
+ ld r11,(0x80 + 8)*1(r10)
+ ld r11,(0x80 + 8)*2(r10)
+ ld r11,(0x80 + 8)*3(r10)
+ ld r11,(0x80 + 8)*4(r10)
+ ld r11,(0x80 + 8)*5(r10)
+ ld r11,(0x80 + 8)*6(r10)
+ ld r11,(0x80 + 8)*7(r10)
+ addi r10,r10,0x80*8
+ bdnz 1b
+.endm
+
+USE_TEXT_SECTION()
+
+_GLOBAL(do_uaccess_flush)
+ UACCESS_FLUSH_FIXUP_SECTION
+ nop
+ nop
+ nop
+ blr
+ L1D_DISPLACEMENT_FLUSH
+ blr
+_ASM_NOKPROBE_SYMBOL(do_uaccess_flush)
+EXPORT_SYMBOL(do_uaccess_flush)
+
/*
* Real mode exceptions actually use this too, but alternate
* instruction code patches (which end up in the common .text area)
@@ -1632,32 +1674,7 @@ rfi_flush_fallback:
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
mfctr r9
- ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
- ld r11,PACA_L1D_FLUSH_SIZE(r13)
- srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
- mtctr r11
- DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
-
- /* order ld/st prior to dcbt stop all streams with flushing */
- sync
-
- /*
- * The load adresses are at staggered offsets within cachelines,
- * which suits some pipelines better (on others it should not
- * hurt).
- */
-1:
- ld r11,(0x80 + 8)*0(r10)
- ld r11,(0x80 + 8)*1(r10)
- ld r11,(0x80 + 8)*2(r10)
- ld r11,(0x80 + 8)*3(r10)
- ld r11,(0x80 + 8)*4(r10)
- ld r11,(0x80 + 8)*5(r10)
- ld r11,(0x80 + 8)*6(r10)
- ld r11,(0x80 + 8)*7(r10)
- addi r10,r10,0x80*8
- bdnz 1b
-
+ L1D_DISPLACEMENT_FLUSH
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
@@ -1673,32 +1690,7 @@ hrfi_flush_fallback:
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
mfctr r9
- ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
- ld r11,PACA_L1D_FLUSH_SIZE(r13)
- srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
- mtctr r11
- DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
-
- /* order ld/st prior to dcbt stop all streams with flushing */
- sync
-
- /*
- * The load adresses are at staggered offsets within cachelines,
- * which suits some pipelines better (on others it should not
- * hurt).
- */
-1:
- ld r11,(0x80 + 8)*0(r10)
- ld r11,(0x80 + 8)*1(r10)
- ld r11,(0x80 + 8)*2(r10)
- ld r11,(0x80 + 8)*3(r10)
- ld r11,(0x80 + 8)*4(r10)
- ld r11,(0x80 + 8)*5(r10)
- ld r11,(0x80 + 8)*6(r10)
- ld r11,(0x80 + 8)*7(r10)
- addi r10,r10,0x80*8
- bdnz 1b
-
+ L1D_DISPLACEMENT_FLUSH
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
@@ -1712,32 +1704,7 @@ entry_flush_fallback:
std r10,PACA_EXRFI+EX_R10(r13)
std r11,PACA_EXRFI+EX_R11(r13)
mfctr r9
- ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
- ld r11,PACA_L1D_FLUSH_SIZE(r13)
- srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
- mtctr r11
- DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
-
- /* order ld/st prior to dcbt stop all streams with flushing */
- sync
-
- /*
- * The load addresses are at staggered offsets within cachelines,
- * which suits some pipelines better (on others it should not
- * hurt).
- */
-1:
- ld r11,(0x80 + 8)*0(r10)
- ld r11,(0x80 + 8)*1(r10)
- ld r11,(0x80 + 8)*2(r10)
- ld r11,(0x80 + 8)*3(r10)
- ld r11,(0x80 + 8)*4(r10)
- ld r11,(0x80 + 8)*5(r10)
- ld r11,(0x80 + 8)*6(r10)
- ld r11,(0x80 + 8)*7(r10)
- addi r10,r10,0x80*8
- bdnz 1b
-
+ L1D_DISPLACEMENT_FLUSH
mtctr r9
ld r9,PACA_EXRFI+EX_R9(r13)
ld r10,PACA_EXRFI+EX_R10(r13)
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -686,8 +686,12 @@ static enum l1d_flush_type enabled_flush
static void *l1d_flush_fallback_area;
static bool no_rfi_flush;
static bool no_entry_flush;
+static bool no_uaccess_flush;
bool rfi_flush;
bool entry_flush;
+bool uaccess_flush;
+DEFINE_STATIC_KEY_FALSE(uaccess_flush_key);
+EXPORT_SYMBOL(uaccess_flush_key);
static int __init handle_no_rfi_flush(char *p)
{
@@ -705,6 +709,14 @@ static int __init handle_no_entry_flush(
}
early_param("no_entry_flush", handle_no_entry_flush);
+static int __init handle_no_uaccess_flush(char *p)
+{
+ pr_info("uaccess-flush: disabled on command line.");
+ no_uaccess_flush = true;
+ return 0;
+}
+early_param("no_uaccess_flush", handle_no_uaccess_flush);
+
/*
* The RFI flush is not KPTI, but because users will see doco that says to use
* nopti we hijack that option here to also disable the RFI flush.
@@ -748,6 +760,20 @@ void entry_flush_enable(bool enable)
entry_flush = enable;
}
+void uaccess_flush_enable(bool enable)
+{
+ if (enable) {
+ do_uaccess_flush_fixups(enabled_flush_types);
+ static_branch_enable(&uaccess_flush_key);
+ on_each_cpu(do_nothing, NULL, 1);
+ } else {
+ static_branch_disable(&uaccess_flush_key);
+ do_uaccess_flush_fixups(L1D_FLUSH_NONE);
+ }
+
+ uaccess_flush = enable;
+}
+
static void __ref init_fallback_flush(void)
{
u64 l1d_size, limit;
@@ -802,6 +828,15 @@ void setup_entry_flush(bool enable)
entry_flush_enable(enable);
}
+void setup_uaccess_flush(bool enable)
+{
+ if (cpu_mitigations_off())
+ return;
+
+ if (!no_uaccess_flush)
+ uaccess_flush_enable(enable);
+}
+
#ifdef CONFIG_DEBUG_FS
static int rfi_flush_set(void *data, u64 val)
{
@@ -855,10 +890,37 @@ static int entry_flush_get(void *data, u
DEFINE_SIMPLE_ATTRIBUTE(fops_entry_flush, entry_flush_get, entry_flush_set, "%llu\n");
+static int uaccess_flush_set(void *data, u64 val)
+{
+ bool enable;
+
+ if (val == 1)
+ enable = true;
+ else if (val == 0)
+ enable = false;
+ else
+ return -EINVAL;
+
+ /* Only do anything if we're changing state */
+ if (enable != uaccess_flush)
+ uaccess_flush_enable(enable);
+
+ return 0;
+}
+
+static int uaccess_flush_get(void *data, u64 *val)
+{
+ *val = uaccess_flush ? 1 : 0;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_uaccess_flush, uaccess_flush_get, uaccess_flush_set, "%llu\n");
+
static __init int rfi_flush_debugfs_init(void)
{
debugfs_create_file("rfi_flush", 0600, powerpc_debugfs_root, NULL, &fops_rfi_flush);
debugfs_create_file("entry_flush", 0600, powerpc_debugfs_root, NULL, &fops_entry_flush);
+ debugfs_create_file("uaccess_flush", 0600, powerpc_debugfs_root, NULL, &fops_uaccess_flush);
return 0;
}
device_initcall(rfi_flush_debugfs_init);
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -141,6 +141,13 @@ SECTIONS
}
. = ALIGN(8);
+ __uaccess_flush_fixup : AT(ADDR(__uaccess_flush_fixup) - LOAD_OFFSET) {
+ __start___uaccess_flush_fixup = .;
+ *(__uaccess_flush_fixup)
+ __stop___uaccess_flush_fixup = .;
+ }
+
+ . = ALIGN(8);
__entry_flush_fixup : AT(ADDR(__entry_flush_fixup) - LOAD_OFFSET) {
__start___entry_flush_fixup = .;
*(__entry_flush_fixup)
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -232,6 +232,56 @@ void do_stf_barrier_fixups(enum stf_barr
do_stf_exit_barrier_fixups(types);
}
+void do_uaccess_flush_fixups(enum l1d_flush_type types)
+{
+ unsigned int instrs[4], *dest;
+ long *start, *end;
+ int i;
+
+ start = PTRRELOC(&__start___uaccess_flush_fixup);
+ end = PTRRELOC(&__stop___uaccess_flush_fixup);
+
+ instrs[0] = 0x60000000; /* nop */
+ instrs[1] = 0x60000000; /* nop */
+ instrs[2] = 0x60000000; /* nop */
+ instrs[3] = 0x4e800020; /* blr */
+
+ i = 0;
+ if (types == L1D_FLUSH_FALLBACK) {
+ instrs[3] = 0x60000000; /* nop */
+ /* fallthrough to fallback flush */
+ }
+
+ if (types & L1D_FLUSH_ORI) {
+ instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
+ instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/
+ }
+
+ if (types & L1D_FLUSH_MTTRIG)
+ instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */
+
+ for (i = 0; start < end; start++, i++) {
+ dest = (void *)start + *start;
+
+ pr_devel("patching dest %lx\n", (unsigned long)dest);
+
+ patch_instruction(dest, instrs[0]);
+
+ patch_instruction((dest + 1), instrs[1]);
+ patch_instruction((dest + 2), instrs[2]);
+ patch_instruction((dest + 3), instrs[3]);
+ }
+
+ printk(KERN_DEBUG "uaccess-flush: patched %d locations (%s flush)\n", i,
+ (types == L1D_FLUSH_NONE) ? "no" :
+ (types == L1D_FLUSH_FALLBACK) ? "fallback displacement" :
+ (types & L1D_FLUSH_ORI) ? (types & L1D_FLUSH_MTTRIG)
+ ? "ori+mttrig type"
+ : "ori type" :
+ (types & L1D_FLUSH_MTTRIG) ? "mttrig type"
+ : "unknown");
+}
+
void do_entry_flush_fixups(enum l1d_flush_type types)
{
unsigned int instrs[3], *dest;
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -126,9 +126,10 @@ static void pnv_setup_rfi_flush(void)
/*
* 4.9 doesn't support Power9 bare metal, so we don't need to flush
- * here - the flush fixes a P9 specific vulnerability.
+ * here - the flushes fix a P9 specific vulnerability.
*/
security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
+ security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS);
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
(security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || \
@@ -140,6 +141,10 @@ static void pnv_setup_rfi_flush(void)
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
setup_entry_flush(enable);
+
+ enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+ security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+ setup_uaccess_flush(enable);
}
static void __init pnv_setup_arch(void)
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -539,6 +539,10 @@ void pseries_setup_rfi_flush(void)
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
setup_entry_flush(enable);
+
+ enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+ security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+ setup_uaccess_flush(enable);
}
static void __init pSeries_setup_arch(void)
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 09/16] i2c: imx: use clk notifier for rate changes
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 08/16] powerpc/64s: flush L1D after user accesses Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 10/16] i2c: imx: Fix external abort on interrupt in exit paths Greg Kroah-Hartman
` (10 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lucas Stach, Philipp Zabel,
Wolfram Sang, Sudip Mukherjee
From: Lucas Stach <l.stach@pengutronix.de>
commit 90ad2cbe88c22d0215225ab9594eeead0eb24fde upstream
Instead of repeatedly calling clk_get_rate for each transfer, register
a clock notifier to update the cached divider value each time the clock
rate actually changes.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i2c/busses/i2c-imx.c | 32 +++++++++++++++++++++++++-------
1 file changed, 25 insertions(+), 7 deletions(-)
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -194,6 +194,7 @@ struct imx_i2c_dma {
struct imx_i2c_struct {
struct i2c_adapter adapter;
struct clk *clk;
+ struct notifier_block clk_change_nb;
void __iomem *base;
wait_queue_head_t queue;
unsigned long i2csr;
@@ -468,15 +469,14 @@ static int i2c_imx_acked(struct imx_i2c_
return 0;
}
-static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx)
+static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
+ unsigned int i2c_clk_rate)
{
struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
- unsigned int i2c_clk_rate;
unsigned int div;
int i;
/* Divider value calculation */
- i2c_clk_rate = clk_get_rate(i2c_imx->clk);
if (i2c_imx->cur_clk == i2c_clk_rate)
return;
@@ -511,6 +511,20 @@ static void i2c_imx_set_clk(struct imx_i
#endif
}
+static int i2c_imx_clk_notifier_call(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct imx_i2c_struct *i2c_imx = container_of(&ndata->clk,
+ struct imx_i2c_struct,
+ clk);
+
+ if (action & POST_RATE_CHANGE)
+ i2c_imx_set_clk(i2c_imx, ndata->new_rate);
+
+ return NOTIFY_OK;
+}
+
static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
{
unsigned int temp = 0;
@@ -518,8 +532,6 @@ static int i2c_imx_start(struct imx_i2c_
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- i2c_imx_set_clk(i2c_imx);
-
imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR);
/* Enable I2C controller */
imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
@@ -1131,6 +1143,9 @@ static int i2c_imx_probe(struct platform
"clock-frequency", &i2c_imx->bitrate);
if (ret < 0 && pdata && pdata->bitrate)
i2c_imx->bitrate = pdata->bitrate;
+ i2c_imx->clk_change_nb.notifier_call = i2c_imx_clk_notifier_call;
+ clk_notifier_register(i2c_imx->clk, &i2c_imx->clk_change_nb);
+ i2c_imx_set_clk(i2c_imx, clk_get_rate(i2c_imx->clk));
/* Set up chip registers to defaults */
imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
@@ -1141,12 +1156,12 @@ static int i2c_imx_probe(struct platform
ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
/* Give it another chance if pinctrl used is not ready yet */
if (ret == -EPROBE_DEFER)
- goto rpm_disable;
+ goto clk_notifier_unregister;
/* Add I2C adapter */
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
if (ret < 0)
- goto rpm_disable;
+ goto clk_notifier_unregister;
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
@@ -1162,6 +1177,8 @@ static int i2c_imx_probe(struct platform
return 0; /* Return OK */
+clk_notifier_unregister:
+ clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
rpm_disable:
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -1195,6 +1212,7 @@ static int i2c_imx_remove(struct platfor
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR);
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
+ clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
clk_disable_unprepare(i2c_imx->clk);
pm_runtime_put_noidle(&pdev->dev);
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 10/16] i2c: imx: Fix external abort on interrupt in exit paths
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 09/16] i2c: imx: use clk notifier for rate changes Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 11/16] i2c: mux: pca954x: Add missing pca9546 definition to chip_desc Greg Kroah-Hartman
` (9 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Oleksij Rempel,
Wolfram Sang, Sudip Mukherjee
From: Krzysztof Kozlowski <krzk@kernel.org>
commit e50e4f0b85be308a01b830c5fbdffc657e1a6dd0 upstream
If interrupt comes late, during probe error path or device remove (could
be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
i2c_imx_isr() will access registers with the clock being disabled. This
leads to external abort on non-linefetch on Toradex Colibri VF50 module
(with Vybrid VF5xx):
Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003
Internal error: : 1008 [#1] ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0)
(free_irq) from [<805844ec>] (release_nodes+0x178/0x284)
(release_nodes) from [<80580030>] (really_probe+0x10c/0x348)
(really_probe) from [<80580380>] (driver_probe_device+0x60/0x170)
(driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60)
(device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0)
(__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4)
(bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec)
(bus_add_driver) from [<80581320>] (driver_register+0x78/0x110)
(driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4)
(do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc)
(kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110)
(kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)
Additionally, the i2c_imx_isr() could wake up the wait queue
(imx_i2c_struct->queue) before its initialization happens.
The resource-managed framework should not be used for interrupt handling,
because the resource will be released too late - after disabling clocks.
The interrupt handler is not prepared for such case.
Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i2c/busses/i2c-imx.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1111,14 +1111,6 @@ static int i2c_imx_probe(struct platform
return ret;
}
- /* Request IRQ */
- ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
- pdev->name, i2c_imx);
- if (ret) {
- dev_err(&pdev->dev, "can't claim irq %d\n", irq);
- goto clk_disable;
- }
-
/* Init queue */
init_waitqueue_head(&i2c_imx->queue);
@@ -1137,6 +1129,14 @@ static int i2c_imx_probe(struct platform
if (ret < 0)
goto rpm_disable;
+ /* Request IRQ */
+ ret = request_threaded_irq(irq, i2c_imx_isr, NULL, IRQF_SHARED,
+ pdev->name, i2c_imx);
+ if (ret) {
+ dev_err(&pdev->dev, "can't claim irq %d\n", irq);
+ goto rpm_disable;
+ }
+
/* Set up clock divider */
i2c_imx->bitrate = IMX_I2C_BIT_RATE;
ret = of_property_read_u32(pdev->dev.of_node,
@@ -1179,13 +1179,12 @@ static int i2c_imx_probe(struct platform
clk_notifier_unregister:
clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
+ free_irq(irq, i2c_imx);
rpm_disable:
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
-
-clk_disable:
clk_disable_unprepare(i2c_imx->clk);
return ret;
}
@@ -1193,7 +1192,7 @@ clk_disable:
static int i2c_imx_remove(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
- int ret;
+ int irq, ret;
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0)
@@ -1213,6 +1212,9 @@ static int i2c_imx_remove(struct platfor
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0)
+ free_irq(irq, i2c_imx);
clk_disable_unprepare(i2c_imx->clk);
pm_runtime_put_noidle(&pdev->dev);
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 11/16] i2c: mux: pca954x: Add missing pca9546 definition to chip_desc
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 10/16] i2c: imx: Fix external abort on interrupt in exit paths Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 12/16] powerpc/8xx: Always fault when _PAGE_ACCESSED is not set Greg Kroah-Hartman
` (8 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mike Looijmans, Peter Rosin, Hauke Mehrtens
From: Mike Looijmans <mike.looijmans@topic.nl>
commit dbe4d69d252e9e65c6c46826980b77b11a142065 upstream.
The spec for the pca9546 was missing. This chip is the same as the pca9545
except that it lacks interrupt lines. While the i2c_device_id table mapped
the pca9546 to the pca9545 definition the compatible table did not.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Peter Rosin <peda@axentia.se>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i2c/muxes/i2c-mux-pca954x.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -96,6 +96,10 @@ static const struct chip_desc chips[] =
.nchans = 4,
.muxtype = pca954x_isswi,
},
+ [pca_9546] = {
+ .nchans = 4,
+ .muxtype = pca954x_isswi,
+ },
[pca_9547] = {
.nchans = 8,
.enable = 0x8,
@@ -113,7 +117,7 @@ static const struct i2c_device_id pca954
{ "pca9543", pca_9543 },
{ "pca9544", pca_9544 },
{ "pca9545", pca_9545 },
- { "pca9546", pca_9545 },
+ { "pca9546", pca_9546 },
{ "pca9547", pca_9547 },
{ "pca9548", pca_9548 },
{ }
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 12/16] powerpc/8xx: Always fault when _PAGE_ACCESSED is not set
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 11/16] i2c: mux: pca954x: Add missing pca9546 definition to chip_desc Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 13/16] Input: sunkbd - avoid use-after-free in teardown paths Greg Kroah-Hartman
` (7 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Michael Ellerman
From: Christophe Leroy <christophe.leroy@csgroup.eu>
commit 29daf869cbab69088fe1755d9dd224e99ba78b56 upstream.
The kernel expects pte_young() to work regardless of CONFIG_SWAP.
Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.
This adds at least 3 instructions to the TLB miss exception
handlers fast path. Following patch will reduce this overhead.
Also update the rotation instruction to the correct number of bits
to reflect all changes done to _PAGE_ACCESSED over time.
Fixes: d069cb4373fe ("powerpc/8xx: Don't touch ACCESSED when no SWAP.")
Fixes: 5f356497c384 ("powerpc/8xx: remove unused _PAGE_WRITETHRU")
Fixes: e0a8e0d90a9f ("powerpc/8xx: Handle PAGE_USER via APG bits")
Fixes: 5b2753fc3e8a ("powerpc/8xx: Implementation of PAGE_EXEC")
Fixes: a891c43b97d3 ("powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/af834e8a0f1fa97bfae65664950f0984a70c4750.1602492856.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/kernel/head_8xx.S | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -359,11 +359,9 @@ InstructionTLBMiss:
/* Load the MI_TWC with the attributes for this "segment." */
MTSPR_CPU6(SPRN_MI_TWC, r11, r3) /* Set segment attributes */
-#ifdef CONFIG_SWAP
- rlwinm r11, r10, 32-5, _PAGE_PRESENT
+ rlwinm r11, r10, 32-11, _PAGE_PRESENT
and r11, r11, r10
rlwimi r10, r11, 0, _PAGE_PRESENT
-#endif
li r11, RPN_PATTERN
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 20-23 and 28 must be clear.
@@ -443,11 +441,9 @@ _ENTRY(DTLBMiss_jmp)
* r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
* r10 = (r10 & ~PRESENT) | r11;
*/
-#ifdef CONFIG_SWAP
- rlwinm r11, r10, 32-5, _PAGE_PRESENT
+ rlwinm r11, r10, 32-11, _PAGE_PRESENT
and r11, r11, r10
rlwimi r10, r11, 0, _PAGE_PRESENT
-#endif
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 22 and 28 must be clear.
* Software indicator bits 24, 25, 26, and 27 must be
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 13/16] Input: sunkbd - avoid use-after-free in teardown paths
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 12/16] powerpc/8xx: Always fault when _PAGE_ACCESSED is not set Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 14/16] mac80211: always wind down STA state Greg Kroah-Hartman
` (6 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Bodong Zhao, Dmitry Torokhov
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
commit 77e70d351db7de07a46ac49b87a6c3c7a60fca7e upstream.
We need to make sure we cancel the reinit work before we tear down the
driver structures.
Reported-by: Bodong Zhao <nopitydays@gmail.com>
Tested-by: Bodong Zhao <nopitydays@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/keyboard/sunkbd.c | 41 ++++++++++++++++++++++++++++++++--------
1 file changed, 33 insertions(+), 8 deletions(-)
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -115,7 +115,8 @@ static irqreturn_t sunkbd_interrupt(stru
switch (data) {
case SUNKBD_RET_RESET:
- schedule_work(&sunkbd->tq);
+ if (sunkbd->enabled)
+ schedule_work(&sunkbd->tq);
sunkbd->reset = -1;
break;
@@ -216,16 +217,12 @@ static int sunkbd_initialize(struct sunk
}
/*
- * sunkbd_reinit() sets leds and beeps to a state the computer remembers they
- * were in.
+ * sunkbd_set_leds_beeps() sets leds and beeps to a state the computer remembers
+ * they were in.
*/
-static void sunkbd_reinit(struct work_struct *work)
+static void sunkbd_set_leds_beeps(struct sunkbd *sunkbd)
{
- struct sunkbd *sunkbd = container_of(work, struct sunkbd, tq);
-
- wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ);
-
serio_write(sunkbd->serio, SUNKBD_CMD_SETLED);
serio_write(sunkbd->serio,
(!!test_bit(LED_CAPSL, sunkbd->dev->led) << 3) |
@@ -238,11 +235,39 @@ static void sunkbd_reinit(struct work_st
SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd));
}
+
+/*
+ * sunkbd_reinit() wait for the keyboard reset to complete and restores state
+ * of leds and beeps.
+ */
+
+static void sunkbd_reinit(struct work_struct *work)
+{
+ struct sunkbd *sunkbd = container_of(work, struct sunkbd, tq);
+
+ /*
+ * It is OK that we check sunkbd->enabled without pausing serio,
+ * as we only want to catch true->false transition that will
+ * happen once and we will be woken up for it.
+ */
+ wait_event_interruptible_timeout(sunkbd->wait,
+ sunkbd->reset >= 0 || !sunkbd->enabled,
+ HZ);
+
+ if (sunkbd->reset >= 0 && sunkbd->enabled)
+ sunkbd_set_leds_beeps(sunkbd);
+}
+
static void sunkbd_enable(struct sunkbd *sunkbd, bool enable)
{
serio_pause_rx(sunkbd->serio);
sunkbd->enabled = enable;
serio_continue_rx(sunkbd->serio);
+
+ if (!enable) {
+ wake_up_interruptible(&sunkbd->wait);
+ cancel_work_sync(&sunkbd->tq);
+ }
}
/*
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 14/16] mac80211: always wind down STA state
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 13/16] Input: sunkbd - avoid use-after-free in teardown paths Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 15/16] KVM: x86: clflushopt should be treated as a no-op by emulation Greg Kroah-Hartman
` (5 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+2e293dbd67de2836ba42, Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
commit dcd479e10a0510522a5d88b29b8f79ea3467d501 upstream.
When (for example) an IBSS station is pre-moved to AUTHORIZED
before it's inserted, and then the insertion fails, we don't
clean up the fast RX/TX states that might already have been
created, since we don't go through all the state transitions
again on the way down.
Do that, if it hasn't been done already, when the station is
freed. I considered only freeing the fast TX/RX state there,
but we might add more state so it's more robust to wind down
the state properly.
Note that we warn if the station was ever inserted, it should
have been properly cleaned up in that case, and the driver
will probably not like things happening out of order.
Reported-by: syzbot+2e293dbd67de2836ba42@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201009141710.7223b322a955.I95bd08b9ad0e039c034927cce0b75beea38e059b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/mac80211/sta_info.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -243,6 +243,24 @@ struct sta_info *sta_info_get_by_idx(str
*/
void sta_info_free(struct ieee80211_local *local, struct sta_info *sta)
{
+ /*
+ * If we had used sta_info_pre_move_state() then we might not
+ * have gone through the state transitions down again, so do
+ * it here now (and warn if it's inserted).
+ *
+ * This will clear state such as fast TX/RX that may have been
+ * allocated during state transitions.
+ */
+ while (sta->sta_state > IEEE80211_STA_NONE) {
+ int ret;
+
+ WARN_ON_ONCE(test_sta_flag(sta, WLAN_STA_INSERTED));
+
+ ret = sta_info_move_state(sta, sta->sta_state - 1);
+ if (WARN_ONCE(ret, "sta_info_move_state() returned %d\n", ret))
+ break;
+ }
+
if (sta->rate_ctrl)
rate_control_free_sta(sta);
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 15/16] KVM: x86: clflushopt should be treated as a no-op by emulation
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 14/16] mac80211: always wind down STA state Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 11:03 ` [PATCH 4.9 16/16] ACPI: GED: fix -Wformat Greg Kroah-Hartman
` (4 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Edmondson, Joao Martins, Paolo Bonzini
From: David Edmondson <david.edmondson@oracle.com>
commit 51b958e5aeb1e18c00332e0b37c5d4e95a3eff84 upstream.
The instruction emulator ignores clflush instructions, yet fails to
support clflushopt. Treat both similarly.
Fixes: 13e457e0eebf ("KVM: x86: Emulator does not decode clflush well")
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20201103120400.240882-1-david.edmondson@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/emulate.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -3934,6 +3934,12 @@ static int em_clflush(struct x86_emulate
return X86EMUL_CONTINUE;
}
+static int em_clflushopt(struct x86_emulate_ctxt *ctxt)
+{
+ /* emulating clflushopt regardless of cpuid */
+ return X86EMUL_CONTINUE;
+}
+
static int em_movsxd(struct x86_emulate_ctxt *ctxt)
{
ctxt->dst.val = (s32) ctxt->src.val;
@@ -4423,7 +4429,7 @@ static const struct opcode group11[] = {
};
static const struct gprefix pfx_0f_ae_7 = {
- I(SrcMem | ByteOp, em_clflush), N, N, N,
+ I(SrcMem | ByteOp, em_clflush), I(SrcMem | ByteOp, em_clflushopt), N, N,
};
static const struct group_dual group15 = { {
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH 4.9 16/16] ACPI: GED: fix -Wformat
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 15/16] KVM: x86: clflushopt should be treated as a no-op by emulation Greg Kroah-Hartman
@ 2020-11-20 11:03 ` Greg Kroah-Hartman
2020-11-20 22:39 ` [PATCH 4.9 00/16] 4.9.245-rc1 review Shuah Khan
` (3 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-20 11:03 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ard Biesheuvel, Nick Desaulniers,
Rafael J. Wysocki
From: Nick Desaulniers <ndesaulniers@google.com>
commit 9debfb81e7654fe7388a49f45bc4d789b94c1103 upstream.
Clang is more aggressive about -Wformat warnings when the format flag
specifies a type smaller than the parameter. It turns out that gsi is an
int. Fixes:
drivers/acpi/evged.c:105:48: warning: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Wformat]
trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
^~~
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Fixes: ea6f3af4c5e6 ("ACPI: GED: add support for _Exx / _Lxx handler methods")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/acpi/evged.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/acpi/evged.c
+++ b/drivers/acpi/evged.c
@@ -104,7 +104,7 @@ static acpi_status acpi_ged_request_inte
switch (gsi) {
case 0 ... 255:
- sprintf(ev_name, "_%c%02hhX",
+ sprintf(ev_name, "_%c%02X",
trigger == ACPI_EDGE_SENSITIVE ? 'E' : 'L', gsi);
if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 4.9 00/16] 4.9.245-rc1 review
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2020-11-20 11:03 ` [PATCH 4.9 16/16] ACPI: GED: fix -Wformat Greg Kroah-Hartman
@ 2020-11-20 22:39 ` Shuah Khan
2020-11-21 18:34 ` Guenter Roeck
` (2 subsequent siblings)
19 siblings, 0 replies; 22+ messages in thread
From: Shuah Khan @ 2020-11-20 22:39 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, lkft-triage, pavel, stable, skhan
On 11/20/20 4:03 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.245 release.
> There are 16 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 22 Nov 2020 10:45:32 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.245-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 4.9 00/16] 4.9.245-rc1 review
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2020-11-20 22:39 ` [PATCH 4.9 00/16] 4.9.245-rc1 review Shuah Khan
@ 2020-11-21 18:34 ` Guenter Roeck
2020-11-22 8:01 ` Greg Kroah-Hartman
2020-11-22 6:05 ` Naresh Kamboju
2020-11-22 6:09 ` Naresh Kamboju
19 siblings, 1 reply; 22+ messages in thread
From: Guenter Roeck @ 2020-11-21 18:34 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, lkft-triage, pavel, stable
On Fri, Nov 20, 2020 at 12:03:05PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.245 release.
> There are 16 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 22 Nov 2020 10:45:32 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 168 pass: 166 fail: 2
Failed builds:
powerpc:cell_defconfig
powerpc:maple_defconfig
Qemu test results:
total: 382 pass: 377 fail: 5
Failed tests:
ppc64:mac99:ppc64_book3s_defconfig:smp:initrd
ppc64:mac99:ppc64_book3s_defconfig:smp:ide:rootfs
ppc64:mac99:ppc64_book3s_defconfig:smp:sdhci:mmc:rootfs
ppc64:mac99:ppc64_book3s_defconfig:smp:nvme:rootfs
ppc64:mac99:ppc64_book3s_defconfig:smp:scsi[DC395]:rootfs
Build failures see below. Note that the failures are different than the
failures observed in the v4.4.y release candidate, meaning that some
additional errors may not be reported.
Tested-by: Guenter Roeck <linux@roeck-us.net>
Guenter
---
Building powerpc:cell_defconfig ... failed
--------------
Error log:
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from arch/powerpc/lib/checksum_wrappers.c:24:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: data definition has no type or storage class [-Werror]
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: parameter names (without types) in function declaration [-Werror]
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors
make[2]: *** [arch/powerpc/lib/checksum_wrappers.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: *** wait: No child processes. Stop.
make[1]: *** [arch/powerpc/lib] Error 2
make[1]: *** Waiting for unfinished jobs....
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from arch/powerpc/platforms/cell/spufs/syscalls.c:8:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: data definition has no type or storage class [-Werror]
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: parameter names (without types) in function declaration [-Werror]
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors
make[4]: *** [arch/powerpc/platforms/cell/spufs/syscalls.o] Error 1
make[4]: *** Waiting for unfinished jobs....
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from include/linux/uaccess.h:8,
from include/linux/crypto.h:26,
from crypto/cipher.c:17:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from include/linux/uaccess.h:8,
from include/linux/crypto.h:26,
from crypto/compress.c:15:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
cc1: some warnings being treated as errors
make[2]: *** [crypto/cipher.o] Error 1
make[2]: *** Waiting for unfinished jobs....
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from include/asm-generic/termios-base.h:7,
from arch/powerpc/include/asm/termios.h:20,
from include/uapi/linux/termios.h:5,
from include/linux/tty.h:6,
from kernel/signal.c:18:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from include/linux/uaccess.h:8,
from include/linux/crypto.h:26,
from include/crypto/algapi.h:15,
from crypto/memneq.c:62:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
cc1: some warnings being treated as errors
Building powerpc:maple_defconfig ... failed
--------------
Error log:
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from arch/powerpc/lib/checksum_wrappers.c:24:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: data definition has no type or storage class [-Werror]
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: parameter names (without types) in function declaration [-Werror]
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors
make[2]: *** [arch/powerpc/lib/checksum_wrappers.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [arch/powerpc/lib] Error 2
make[1]: *** Waiting for unfinished jobs....
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from include/linux/uaccess.h:8,
from include/linux/crypto.h:26,
from crypto/cipher.c:17:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
cc1: some warnings being treated as errors
make[2]: *** [crypto/cipher.o] Error 1
make[2]: *** Waiting for unfinished jobs....
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from include/linux/uaccess.h:8,
from include/linux/crypto.h:26,
from crypto/compress.c:15:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
cc1: some warnings being treated as errors
make[2]: *** [crypto/compress.o] Error 1
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from include/linux/uaccess.h:8,
from include/linux/crypto.h:26,
from include/crypto/algapi.h:15,
from crypto/memneq.c:62:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
cc1: some warnings being treated as errors
make[2]: *** [crypto/memneq.o] Error 1
make[1]: *** [crypto] Error 2
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from include/asm-generic/termios-base.h:7,
from arch/powerpc/include/asm/termios.h:20,
from include/uapi/linux/termios.h:5,
from include/linux/tty.h:6,
from kernel/signal.c:18:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from include/asm-generic/termios-base.h:7,
from arch/powerpc/include/asm/termios.h:20,
from include/uapi/linux/termios.h:5,
from include/linux/tty.h:6,
from arch/powerpc/kernel/setup_64.c:27:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: data definition has no type or storage class [-Werror]
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: parameter names (without types) in function declaration [-Werror]
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
cc1: some warnings being treated as errors
make[2]: *** [kernel/signal.o] Error 1
make[2]: *** Waiting for unfinished jobs....
cc1: all warnings being treated as errors
make[2]: *** [arch/powerpc/kernel/setup_64.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [arch/powerpc/kernel] Error 2
In file included from arch/powerpc/include/asm/kup.h:10:0,
from arch/powerpc/include/asm/uaccess.h:12,
from include/linux/poll.h:11,
from fs/bad_inode.c:16:
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
if (static_branch_unlikely(&uaccess_flush_key))
^~~~~~~~~~~~~~~~~
do_uaccess_flush
arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
cc1: some warnings being treated as errors
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 4.9 00/16] 4.9.245-rc1 review
2020-11-21 18:34 ` Guenter Roeck
@ 2020-11-22 8:01 ` Greg Kroah-Hartman
0 siblings, 0 replies; 22+ messages in thread
From: Greg Kroah-Hartman @ 2020-11-22 8:01 UTC (permalink / raw)
To: Daniel Axtens, Guenter Roeck
Cc: linux-kernel, torvalds, akpm, shuah, patches, lkft-triage, pavel, stable
On Sat, Nov 21, 2020 at 10:34:46AM -0800, Guenter Roeck wrote:
> On Fri, Nov 20, 2020 at 12:03:05PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.9.245 release.
> > There are 16 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun, 22 Nov 2020 10:45:32 +0000.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 168 pass: 166 fail: 2
> Failed builds:
> powerpc:cell_defconfig
> powerpc:maple_defconfig
> Qemu test results:
> total: 382 pass: 377 fail: 5
> Failed tests:
> ppc64:mac99:ppc64_book3s_defconfig:smp:initrd
> ppc64:mac99:ppc64_book3s_defconfig:smp:ide:rootfs
> ppc64:mac99:ppc64_book3s_defconfig:smp:sdhci:mmc:rootfs
> ppc64:mac99:ppc64_book3s_defconfig:smp:nvme:rootfs
> ppc64:mac99:ppc64_book3s_defconfig:smp:scsi[DC395]:rootfs
>
> Build failures see below. Note that the failures are different than the
> failures observed in the v4.4.y release candidate, meaning that some
> additional errors may not be reported.
>
> Tested-by: Guenter Roeck <linux@roeck-us.net>
>
> Guenter
>
> ---
> Building powerpc:cell_defconfig ... failed
> --------------
> Error log:
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from arch/powerpc/lib/checksum_wrappers.c:24:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: data definition has no type or storage class [-Werror]
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: parameter names (without types) in function declaration [-Werror]
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> cc1: all warnings being treated as errors
> make[2]: *** [arch/powerpc/lib/checksum_wrappers.o] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[2]: *** wait: No child processes. Stop.
> make[1]: *** [arch/powerpc/lib] Error 2
> make[1]: *** Waiting for unfinished jobs....
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from arch/powerpc/platforms/cell/spufs/syscalls.c:8:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: data definition has no type or storage class [-Werror]
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: parameter names (without types) in function declaration [-Werror]
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> cc1: all warnings being treated as errors
> make[4]: *** [arch/powerpc/platforms/cell/spufs/syscalls.o] Error 1
> make[4]: *** Waiting for unfinished jobs....
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from include/linux/uaccess.h:8,
> from include/linux/crypto.h:26,
> from crypto/cipher.c:17:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from include/linux/uaccess.h:8,
> from include/linux/crypto.h:26,
> from crypto/compress.c:15:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
> cc1: some warnings being treated as errors
> make[2]: *** [crypto/cipher.o] Error 1
> make[2]: *** Waiting for unfinished jobs....
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from include/asm-generic/termios-base.h:7,
> from arch/powerpc/include/asm/termios.h:20,
> from include/uapi/linux/termios.h:5,
> from include/linux/tty.h:6,
> from kernel/signal.c:18:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from include/linux/uaccess.h:8,
> from include/linux/crypto.h:26,
> from include/crypto/algapi.h:15,
> from crypto/memneq.c:62:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> cc1: some warnings being treated as errors
>
> Building powerpc:maple_defconfig ... failed
> --------------
> Error log:
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from arch/powerpc/lib/checksum_wrappers.c:24:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: data definition has no type or storage class [-Werror]
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: parameter names (without types) in function declaration [-Werror]
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> cc1: all warnings being treated as errors
> make[2]: *** [arch/powerpc/lib/checksum_wrappers.o] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [arch/powerpc/lib] Error 2
> make[1]: *** Waiting for unfinished jobs....
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from include/linux/uaccess.h:8,
> from include/linux/crypto.h:26,
> from crypto/cipher.c:17:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> cc1: some warnings being treated as errors
> make[2]: *** [crypto/cipher.o] Error 1
> make[2]: *** Waiting for unfinished jobs....
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from include/linux/uaccess.h:8,
> from include/linux/crypto.h:26,
> from crypto/compress.c:15:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> cc1: some warnings being treated as errors
> make[2]: *** [crypto/compress.o] Error 1
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from include/linux/uaccess.h:8,
> from include/linux/crypto.h:26,
> from include/crypto/algapi.h:15,
> from crypto/memneq.c:62:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> cc1: some warnings being treated as errors
> make[2]: *** [crypto/memneq.o] Error 1
> make[1]: *** [crypto] Error 2
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from include/asm-generic/termios-base.h:7,
> from arch/powerpc/include/asm/termios.h:20,
> from include/uapi/linux/termios.h:5,
> from include/linux/tty.h:6,
> from kernel/signal.c:18:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from include/asm-generic/termios-base.h:7,
> from arch/powerpc/include/asm/termios.h:20,
> from include/uapi/linux/termios.h:5,
> from include/linux/tty.h:6,
> from arch/powerpc/kernel/setup_64.c:27:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: data definition has no type or storage class [-Werror]
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: parameter names (without types) in function declaration [-Werror]
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> cc1: some warnings being treated as errors
> make[2]: *** [kernel/signal.o] Error 1
> make[2]: *** Waiting for unfinished jobs....
> cc1: all warnings being treated as errors
> make[2]: *** [arch/powerpc/kernel/setup_64.o] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [arch/powerpc/kernel] Error 2
> In file included from arch/powerpc/include/asm/kup.h:10:0,
> from arch/powerpc/include/asm/uaccess.h:12,
> from include/linux/poll.h:11,
> from fs/bad_inode.c:16:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: data definition has no type or storage class
> DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: error: type defaults to ‘int’ in declaration of ‘DECLARE_STATIC_KEY_FALSE’ [-Werror=implicit-int]
> arch/powerpc/include/asm/book3s/64/kup-radix.h:5:1: warning: parameter names (without types) in function declaration
> arch/powerpc/include/asm/book3s/64/kup-radix.h: In function ‘prevent_user_access’:
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:6: error: implicit declaration of function ‘static_branch_unlikely’ [-Werror=implicit-function-declaration]
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~~~~~~
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: error: ‘uaccess_flush_key’ undeclared (first use in this function); did you mean ‘do_uaccess_flush’?
> if (static_branch_unlikely(&uaccess_flush_key))
> ^~~~~~~~~~~~~~~~~
> do_uaccess_flush
> arch/powerpc/include/asm/book3s/64/kup-radix.h:18:30: note: each undeclared identifier is reported only once for each function it appears in
> cc1: some warnings being treated as errors
Daniel, your commit broke this on 4.9, and on 4.14.y. If you could
provide fix-up patches for these trees as well, that would be great.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [PATCH 4.9 00/16] 4.9.245-rc1 review
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2020-11-21 18:34 ` Guenter Roeck
@ 2020-11-22 6:05 ` Naresh Kamboju
2020-11-22 6:09 ` Naresh Kamboju
19 siblings, 0 replies; 22+ messages in thread
From: Naresh Kamboju @ 2020-11-22 6:05 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
Shuah Khan, patches, lkft-triage, pavel, linux-stable
On Fri, 20 Nov 2020 at 16:34, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.245 release.
> There are 16 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 22 Nov 2020 10:45:32 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.245-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Summary
------------------------------------------------------------------------
kernel: 4.9.245-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: b75776b03db0bcff278a791d60b6ed02df615c1c
git describe: v4.9.244-17-gb75776b03db0
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.9.y/build/v4.9.244-17-gb75776b03db0
No regressions (compared to build v4.9.244)
No fixes (compared to build v4.9.244)
Ran 40992 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* v4l2-compliance
* ltp-cve-tests
* network-basic-tests
* ltp-open-posix-tests
* ltp-tracing-tests
* kvm-unit-tests
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 22+ messages in thread* Re: [PATCH 4.9 00/16] 4.9.245-rc1 review
2020-11-20 11:03 [PATCH 4.9 00/16] 4.9.245-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2020-11-22 6:05 ` Naresh Kamboju
@ 2020-11-22 6:09 ` Naresh Kamboju
19 siblings, 0 replies; 22+ messages in thread
From: Naresh Kamboju @ 2020-11-22 6:09 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
Shuah Khan, patches, lkft-triage, pavel, linux-stable
On Fri, 20 Nov 2020 at 16:34, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.9.245 release.
> There are 16 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 22 Nov 2020 10:45:32 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.245-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Summary
------------------------------------------------------------------------
kernel: 4.4.245-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 11095ab90e22ac875983239a445f6b4ad64b6e08
git describe: v4.4.244-16-g11095ab90e22
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.4.y/build/v4.4.244-16-g11095ab90e22
No regressions (compared to build v4.4.244)
No fixes (compared to build v4.4.244)
Ran 32775 total tests in the following environments and test suites.
Environments
--------------
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* v4l2-compliance
* kvm-unit-tests
* ltp-tracing-tests
* install-android-platform-tools-r2600
Summary
------------------------------------------------------------------------
kernel: 4.4.245-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.245-rc1-hikey-20201120-861
git commit: a395e149575bc8d8ec23a677f979301bfefd8862
git describe: 4.4.245-rc1-hikey-20201120-861
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.245-rc1-hikey-20201120-861
No regressions (compared to build 4.4.244-rc1-hikey-20201117-859)
No fixes (compared to build 4.4.244-rc1-hikey-20201117-859)
Ran 1722 total tests in the following environments and test suites.
Environments
--------------
- hi6220-hikey - arm64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 22+ messages in thread