linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, catalin.marinas@arm.com,
	mathieu.poirier@linaro.org, mike.leach@linaro.org,
	leo.yan@linaro.org, jonathan.zhouwen@huawei.com,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>,
	Tingwei Zhang <tingwei@codeaurora.org>
Subject: [PATCH v5 02/25] coresight: etm4x: Skip accessing TRCPDCR in save/restore
Date: Mon, 14 Dec 2020 17:37:08 +0000	[thread overview]
Message-ID: <20201214173731.302520-3-suzuki.poulose@arm.com> (raw)
In-Reply-To: <20201214173731.302520-1-suzuki.poulose@arm.com>

When the ETM is affected by Qualcomm errata, modifying the
TRCPDCR could cause the system hang. Even though this is
taken care of during enable/disable ETM, the ETM state
save/restore could still access the TRCPDCR. Make sure
we skip the access during the save/restore.

Found by code inspection.

Fixes: 02510a5aa78df45 ("coresight: etm4x: Add support to skip trace unit power up")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Tingwei Zhang <tingwei@codeaurora.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
 drivers/hwtracing/coresight/coresight-etm4x-core.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index eb56fba1f7c0..20136722011e 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -1277,7 +1277,8 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata)
 
 	state->trcclaimset = readl(drvdata->base + TRCCLAIMCLR);
 
-	state->trcpdcr = readl(drvdata->base + TRCPDCR);
+	if (!drvdata->skip_power_up)
+		state->trcpdcr = readl(drvdata->base + TRCPDCR);
 
 	/* wait for TRCSTATR.IDLE to go up */
 	if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 1)) {
@@ -1295,9 +1296,9 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata)
 	 * potentially save power on systems that respect the TRCPDCR_PU
 	 * despite requesting software to save/restore state.
 	 */
-	writel_relaxed((state->trcpdcr & ~TRCPDCR_PU),
-			drvdata->base + TRCPDCR);
-
+	if (!drvdata->skip_power_up)
+		writel_relaxed((state->trcpdcr & ~TRCPDCR_PU),
+				drvdata->base + TRCPDCR);
 out:
 	CS_LOCK(drvdata->base);
 	return ret;
@@ -1392,7 +1393,8 @@ static void etm4_cpu_restore(struct etmv4_drvdata *drvdata)
 
 	writel_relaxed(state->trcclaimset, drvdata->base + TRCCLAIMSET);
 
-	writel_relaxed(state->trcpdcr, drvdata->base + TRCPDCR);
+	if (!drvdata->skip_power_up)
+		writel_relaxed(state->trcpdcr, drvdata->base + TRCPDCR);
 
 	drvdata->state_needs_restore = false;
 
-- 
2.24.1


  parent reply	other threads:[~2020-12-14 18:23 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-14 17:37 [PATCH v5 00/25] coresight: etm4x: Support for system instructions Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 01/25] coresight: etm4x: Handle access to TRCSSPCICRn Suzuki K Poulose
2020-12-14 17:37 ` Suzuki K Poulose [this message]
2020-12-14 17:37 ` [PATCH v5 03/25] coresight: Introduce device access abstraction Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 04/25] coresight: tpiu: Prepare for using coresight " Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 05/25] coresight: Convert coresight_timeout to use " Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 06/25] coresight: Convert claim/disclaim operations to use access wrappers Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 07/25] coresight: etm4x: Always read the registers on the host CPU Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 08/25] coresight: etm4x: Convert all register accesses Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 09/25] coresight: etm4x: Add commentary on the registers Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 10/25] coresight: etm4x: Add sysreg access helpers Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 11/25] coresight: etm4x: Define DEVARCH register fields Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 12/25] coresight: etm4x: Check for Software Lock Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 13/25] coresight: etm4x: Cleanup secure exception level masks Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 14/25] coresight: etm4x: Clean up " Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 15/25] coresight: etm4x: Handle ETM architecture version Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 16/25] coresight: etm4x: Detect access early on the target CPU Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 17/25] coresight: etm4x: Use TRCDEVARCH for component discovery Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 18/25] coresight: etm4x: Expose trcdevarch via trcidr Suzuki K Poulose
2020-12-16 18:01   ` Mike Leach
2020-12-14 17:37 ` [PATCH v5 19/25] coresight: etm4x: Add necessary synchronization for sysreg access Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 20/25] coresight: etm4x: Detect system instructions support Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 21/25] coresight: etm4x: Refactor probing routine Suzuki K Poulose
2021-01-05 21:44   ` Mathieu Poirier
2020-12-14 17:37 ` [PATCH v5 22/25] coresight: etm4x: Add support for sysreg only devices Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 23/25] dts: bindings: coresight: ETM system register access only units Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 24/25] arm64: Add TRFCR_ELx definitions Suzuki K Poulose
2020-12-14 17:37 ` [PATCH v5 25/25] coresight: Add support for v8.4 SelfHosted tracing Suzuki K Poulose
2021-01-06 14:48 ` [PATCH v5 00/25] coresight: etm4x: Support for system instructions Mike Leach
2021-01-06 14:52   ` Suzuki K Poulose

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201214173731.302520-3-suzuki.poulose@arm.com \
    --to=suzuki.poulose@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=jonathan.zhouwen@huawei.com \
    --cc=leo.yan@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=mike.leach@linaro.org \
    --cc=saiprakash.ranjan@codeaurora.org \
    --cc=tingwei@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).