* [PATCH v5 0/3] power: supply: mt6360_charger: add MT6360 charger support @ 2021-05-28 8:12 Gene Chen 2021-05-28 8:12 ` [PATCH v5 1/3] lib: add linear range get selector within Gene Chen ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Gene Chen @ 2021-05-28 8:12 UTC (permalink / raw) To: sre, matthias.bgg, matti.vaittinen Cc: broonie, robh+dt, devicetree, inux-pm, linux-arm-kernel, linux-mediatek, linux-kernel, rdunlap, gene_chen, Wilma.Wu, shufan_lee, cy_huang, benjamin.chao This patch series add MT6360 Charger support contains driver and binding document Gene Chen (3) lib: add linear range get selector within dt-bindings: power: Add bindings document for Charger support on MT6360 PMIC power: supply: mt6360_charger: add MT6360 charger support Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml | 48 drivers/power/supply/Kconfig | 11 drivers/power/supply/Makefile | 1 drivers/power/supply/mt6360_charger.c | 856 ++++++++++ include/linux/linear_range.h | 2 lib/linear_ranges.c | 31 6 files changed, 949 insertions(+) changelogs between v1 & v2 - Add binding property with unit and custom name prefix - Remove extcon device, redundant brackets and interrupts - Fix power supply prop "charger type" changelogs between v2 & v3 - Add register selector to value mapping changelogs between v3 & v4 - move pdata vinovp to mt6360_chg_info - remove unuse sysfs attribute - refactor debug log and warning - add power supply prop input voltage limit changelogs between v4 & v5 - add linear range selector mapping - use linear range to map charger setting ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v5 1/3] lib: add linear range get selector within 2021-05-28 8:12 [PATCH v5 0/3] power: supply: mt6360_charger: add MT6360 charger support Gene Chen @ 2021-05-28 8:12 ` Gene Chen 2021-05-28 9:02 ` Vaittinen, Matti 2021-05-28 8:12 ` [PATCH v5 2/3] dt-bindings: power: Add bindings document for Charger support on MT6360 PMIC Gene Chen 2021-05-28 8:13 ` [PATCH v5 3/3] power: supply: mt6360_charger: add MT6360 charger support Gene Chen 2 siblings, 1 reply; 9+ messages in thread From: Gene Chen @ 2021-05-28 8:12 UTC (permalink / raw) To: sre, matthias.bgg, matti.vaittinen Cc: broonie, robh+dt, devicetree, inux-pm, linux-arm-kernel, linux-mediatek, linux-kernel, rdunlap, gene_chen, Wilma.Wu, shufan_lee, cy_huang, benjamin.chao From: Gene Chen <gene_chen@richtek.com> Add linear range get selector within for choose closest selector between minimum and maximum selector. Signed-off-by: Gene Chen <gene_chen@richtek.com> --- include/linux/linear_range.h | 2 ++ lib/linear_ranges.c | 31 +++++++++++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/include/linux/linear_range.h b/include/linux/linear_range.h index 17b5943727d5..fd3d0b358f22 100644 --- a/include/linux/linear_range.h +++ b/include/linux/linear_range.h @@ -41,6 +41,8 @@ int linear_range_get_selector_low(const struct linear_range *r, int linear_range_get_selector_high(const struct linear_range *r, unsigned int val, unsigned int *selector, bool *found); +void linear_range_get_selector_within(const struct linear_range *r, + unsigned int val, unsigned int *selector); int linear_range_get_selector_low_array(const struct linear_range *r, int ranges, unsigned int val, unsigned int *selector, bool *found); diff --git a/lib/linear_ranges.c b/lib/linear_ranges.c index ced5c15d3f04..a1a7dfa881de 100644 --- a/lib/linear_ranges.c +++ b/lib/linear_ranges.c @@ -241,5 +241,36 @@ int linear_range_get_selector_high(const struct linear_range *r, } EXPORT_SYMBOL_GPL(linear_range_get_selector_high); +/** + * linear_range_get_selector_within - return linear range selector for value + * @r: pointer to linear range where selector is looked from + * @val: value for which the selector is searched + * @selector: address where found selector value is updated + * + * Return selector for which range value is closest match for given + * input value. Value is matching if it is equal or lower than given + * value. But return maximum selector if given value is higher than + * maximum value. + */ +void linear_range_get_selector_within(const struct linear_range *r, + unsigned int val, unsigned int *selector) +{ + if (r->min > val) { + *selector = r->min_sel; + return; + } + + if (linear_range_get_max_value(r) < val) { + *selector = r->max_sel; + return; + } + + if (r->step == 0) + *selector = r->min_sel; + else + *selector = (val - r->min) / r->step + r->min_sel; +} +EXPORT_SYMBOL_GPL(linear_range_get_selector_within); + MODULE_DESCRIPTION("linear-ranges helper"); MODULE_LICENSE("GPL"); -- 2.25.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v5 1/3] lib: add linear range get selector within 2021-05-28 8:12 ` [PATCH v5 1/3] lib: add linear range get selector within Gene Chen @ 2021-05-28 9:02 ` Vaittinen, Matti 0 siblings, 0 replies; 9+ messages in thread From: Vaittinen, Matti @ 2021-05-28 9:02 UTC (permalink / raw) To: gene.chen.richtek, sre, matthias.bgg Cc: rdunlap, inux-pm, shufan_lee, cy_huang, broonie, devicetree, gene_chen, linux-kernel, linux-arm-kernel, Wilma.Wu, linux-mediatek, robh+dt, benjamin.chao On Fri, 2021-05-28 at 16:12 +0800, Gene Chen wrote: > From: Gene Chen <gene_chen@richtek.com> > > Add linear range get selector within for choose closest selector > between minimum and maximum selector. > > Signed-off-by: Gene Chen <gene_chen@richtek.com> > --- > include/linux/linear_range.h | 2 ++ > lib/linear_ranges.c | 31 +++++++++++++++++++++++++++++++ > 2 files changed, 33 insertions(+) > > diff --git a/include/linux/linear_range.h > b/include/linux/linear_range.h > index 17b5943727d5..fd3d0b358f22 100644 > --- a/include/linux/linear_range.h > +++ b/include/linux/linear_range.h > @@ -41,6 +41,8 @@ int linear_range_get_selector_low(const struct > linear_range *r, > int linear_range_get_selector_high(const struct linear_range *r, > unsigned int val, unsigned int > *selector, > bool *found); > +void linear_range_get_selector_within(const struct linear_range *r, > + unsigned int val, unsigned int > *selector); > int linear_range_get_selector_low_array(const struct linear_range > *r, > int ranges, unsigned int val, > unsigned int *selector, bool > *found); > diff --git a/lib/linear_ranges.c b/lib/linear_ranges.c > index ced5c15d3f04..a1a7dfa881de 100644 > --- a/lib/linear_ranges.c > +++ b/lib/linear_ranges.c > @@ -241,5 +241,36 @@ int linear_range_get_selector_high(const struct > linear_range *r, > } > EXPORT_SYMBOL_GPL(linear_range_get_selector_high); > > +/** > + * linear_range_get_selector_within - return linear range selector > for value > + * @r: pointer to linear range where selector is > looked from > + * @val: value for which the selector is searched > + * @selector: address where found selector value is updated > + * > + * Return selector for which range value is closest match for given > + * input value. Value is matching if it is equal or lower than given > + * value. But return maximum selector if given value is higher than > + * maximum value. > + */ > +void linear_range_get_selector_within(const struct linear_range *r, > + unsigned int val, unsigned int > *selector) I like the naming! The "within" sounds good to me :) It slightly bothers my "style eye" to see this not returning a value (void) - but still returning the value via parameter (selector). It may be slightly more complicated to read when used. Please consider for first time reading code like: unsigned int do_something(const struct linear_range *r, unsigned int val, int *myvalue) { int ret; ... linear_range_get_selector_within(r, val, myvalue); ... return ret; } to reading code like: unsigned int do_something(const struct linear_range *r, unsigned int val, int *myvalue) { int ret; ... *myvalue = linear_range_get_selector_within(r, val); ... return ret; } For me reading the latter shows better where the myvalue is really set. OTOH, Your suggestion is consistent with the other functions so I am not asking for a change if this is Ok with others :) Thanks a lot! Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > +{ > + if (r->min > val) { > + *selector = r->min_sel; > + return; > + } > + > + if (linear_range_get_max_value(r) < val) { > + *selector = r->max_sel; > + return; > + } > + > + if (r->step == 0) > + *selector = r->min_sel; > + else > + *selector = (val - r->min) / r->step + r->min_sel; > +} > +EXPORT_SYMBOL_GPL(linear_range_get_selector_within); > + > MODULE_DESCRIPTION("linear-ranges helper"); > MODULE_LICENSE("GPL"); ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v5 2/3] dt-bindings: power: Add bindings document for Charger support on MT6360 PMIC 2021-05-28 8:12 [PATCH v5 0/3] power: supply: mt6360_charger: add MT6360 charger support Gene Chen 2021-05-28 8:12 ` [PATCH v5 1/3] lib: add linear range get selector within Gene Chen @ 2021-05-28 8:12 ` Gene Chen 2021-05-28 8:13 ` [PATCH v5 3/3] power: supply: mt6360_charger: add MT6360 charger support Gene Chen 2 siblings, 0 replies; 9+ messages in thread From: Gene Chen @ 2021-05-28 8:12 UTC (permalink / raw) To: sre, matthias.bgg, matti.vaittinen Cc: broonie, robh+dt, devicetree, inux-pm, linux-arm-kernel, linux-mediatek, linux-kernel, rdunlap, gene_chen, Wilma.Wu, shufan_lee, cy_huang, benjamin.chao, Rob Herring From: Gene Chen <gene_chen@richtek.com> Add bindings document for Charger support on MT6360 PMIC Signed-off-by: Gene Chen <gene_chen@richtek.com> Reviewed-by: Rob Herring <robh@kernel.org> --- .../bindings/power/supply/mt6360_charger.yaml | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml new file mode 100644 index 000000000000..b89b15a5bfa4 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/mt6360_charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Battery charger driver for MT6360 PMIC from MediaTek Integrated. + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + This module is part of the MT6360 MFD device. + Provides Battery Charger, Boost for OTG devices and BC1.2 detection. + +properties: + compatible: + const: mediatek,mt6360-chg + + richtek,vinovp-microvolt: + description: Maximum CHGIN regulation voltage in uV. + enum: [ 5500000, 6500000, 11000000, 14500000 ] + + + usb-otg-vbus-regulator: + type: object + description: OTG boost regulator. + $ref: /schemas/regulator/regulator.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + mt6360_charger: charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-compatible = "usb-otg-vbus"; + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; +... -- 2.25.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v5 3/3] power: supply: mt6360_charger: add MT6360 charger support 2021-05-28 8:12 [PATCH v5 0/3] power: supply: mt6360_charger: add MT6360 charger support Gene Chen 2021-05-28 8:12 ` [PATCH v5 1/3] lib: add linear range get selector within Gene Chen 2021-05-28 8:12 ` [PATCH v5 2/3] dt-bindings: power: Add bindings document for Charger support on MT6360 PMIC Gene Chen @ 2021-05-28 8:13 ` Gene Chen 2021-05-28 9:47 ` Matti Vaittinen 2021-05-28 16:22 ` Randy Dunlap 2 siblings, 2 replies; 9+ messages in thread From: Gene Chen @ 2021-05-28 8:13 UTC (permalink / raw) To: sre, matthias.bgg, matti.vaittinen Cc: broonie, robh+dt, devicetree, inux-pm, linux-arm-kernel, linux-mediatek, linux-kernel, rdunlap, gene_chen, Wilma.Wu, shufan_lee, cy_huang, benjamin.chao From: Gene Chen <gene_chen@richtek.com> Add basic support for the battery charger for MT6360 PMIC Signed-off-by: Gene Chen <gene_chen@richtek.com> --- drivers/power/supply/Kconfig | 11 + drivers/power/supply/Makefile | 1 + drivers/power/supply/mt6360_charger.c | 856 ++++++++++++++++++++++++++ 3 files changed, 868 insertions(+) create mode 100644 drivers/power/supply/mt6360_charger.c diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index e696364126f1..3257b1ad5e36 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -577,6 +577,17 @@ config CHARGER_MP2629 Battery charger. This driver provides Battery charger power management functions on the systems. +config CHARGER_MT6360 + tristate "Mediatek MT6360 Charger Driver" + depends on MFD_MT6360 + depends on REGULATOR + select LINEAR_RANGES + help + Say Y here to enable MT6360 Charger Part. + The device supports High-Accuracy Voltage/Current Regulation, + Average Input Current Regulation, Battery Tempature Sensing, + Over-Temperature Protection, DPDM Detection for BC1.2 + config CHARGER_QCOM_SMBB tristate "Qualcomm Switch-Mode Battery Charger and Boost" depends on MFD_SPMI_PMIC || COMPILE_TEST diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index a7309a3d1a47..5317fe787149 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -78,6 +78,7 @@ obj-$(CONFIG_CHARGER_MAX77693) += max77693_charger.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o obj-$(CONFIG_CHARGER_MP2629) += mp2629_charger.o +obj-$(CONFIG_CHARGER_MT6360) += mt6360_charger.o obj-$(CONFIG_CHARGER_QCOM_SMBB) += qcom_smbb.o obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o diff --git a/drivers/power/supply/mt6360_charger.c b/drivers/power/supply/mt6360_charger.c new file mode 100644 index 000000000000..07fa0b3870e0 --- /dev/null +++ b/drivers/power/supply/mt6360_charger.c @@ -0,0 +1,856 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021 MediaTek Inc. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/linear_range.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> + +#define MT6360_PMU_CHG_CTRL1 0x311 +#define MT6360_PMU_CHG_CTRL2 0x312 +#define MT6360_PMU_CHG_CTRL3 0x313 +#define MT6360_PMU_CHG_CTRL4 0x314 +#define MT6360_PMU_CHG_CTRL5 0x315 +#define MT6360_PMU_CHG_CTRL6 0x316 +#define MT6360_PMU_CHG_CTRL7 0x317 +#define MT6360_PMU_CHG_CTRL8 0x318 +#define MT6360_PMU_CHG_CTRL9 0x319 +#define MT6360_PMU_CHG_CTRL10 0x31A +#define MT6360_PMU_DEVICE_TYPE 0x322 +#define MT6360_PMU_USB_STATUS1 0x327 +#define MT6360_PMU_CHG_STAT 0x34A +#define MT6360_PMU_CHG_CTRL19 0x361 +#define MT6360_PMU_FOD_STAT 0x3E7 + +/* MT6360_PMU_CHG_CTRL1 */ +#define MT6360_FSLP_SHFT (3) +#define MT6360_FSLP_MASK BIT(MT6360_FSLP_SHFT) +#define MT6360_OPA_MODE_SHFT (0) +#define MT6360_OPA_MODE_MASK BIT(MT6360_OPA_MODE_SHFT) +/* MT6360_PMU_CHG_CTRL2 */ +#define MT6360_IINLMTSEL_SHFT (2) +#define MT6360_IINLMTSEL_MASK GENMASK(3, 2) +/* MT6360_PMU_CHG_CTRL3 */ +#define MT6360_IAICR_SHFT (2) +#define MT6360_IAICR_MASK GENMASK(7, 2) +#define MT6360_ILIM_EN_MASK BIT(0) +/* MT6360_PMU_CHG_CTRL4 */ +#define MT6360_VOREG_SHFT (1) +#define MT6360_VOREG_MASK GENMASK(7, 1) +/* MT6360_PMU_CHG_CTRL5 */ +#define MT6360_VOBST_MASK GENMASK(7, 2) +/* MT6360_PMU_CHG_CTRL6 */ +#define MT6360_VMIVR_SHFT (1) +#define MT6360_VMIVR_MASK GENMASK(7, 1) +/* MT6360_PMU_CHG_CTRL7 */ +#define MT6360_ICHG_SHFT (2) +#define MT6360_ICHG_MASK GENMASK(7, 2) +/* MT6360_PMU_CHG_CTRL8 */ +#define MT6360_IPREC_SHFT (0) +#define MT6360_IPREC_MASK GENMASK(3, 0) +/* MT6360_PMU_CHG_CTRL9 */ +#define MT6360_IEOC_SHFT (4) +#define MT6360_IEOC_MASK GENMASK(7, 4) +/* MT6360_PMU_CHG_CTRL10 */ +#define MT6360_OTG_OC_MASK GENMASK(3, 0) +/* MT6360_PMU_DEVICE_TYPE */ +#define MT6360_USBCHGEN_MASK BIT(7) +/* MT6360_PMU_USB_STATUS1 */ +#define MT6360_USB_STATUS_SHFT (4) +#define MT6360_USB_STATUS_MASK GENMASK(6, 4) +/* MT6360_PMU_CHG_STAT */ +#define MT6360_CHG_STAT_SHFT (6) +#define MT6360_CHG_STAT_MASK GENMASK(7, 6) +#define MT6360_VBAT_LVL_MASK BIT(5) +/* MT6360_PMU_CHG_CTRL19 */ +#define MT6360_VINOVP_SHFT (5) +#define MT6360_VINOVP_MASK GENMASK(6, 5) +/* MT6360_PMU_FOD_STAT */ +#define MT6360_CHRDET_EXT_MASK BIT(4) + +enum { + MT6360_RANGE_VMIVR, + MT6360_RANGE_ICHG, + MT6360_RANGE_VOREG, + MT6360_RANGE_AICR, + MT6360_RANGE_IPREC, + MT6360_RANGE_IEOC, + MT6360_RANGE_MAX, +}; + +#define MT6360_LINEAR_RANGE(idx, _min, _min_sel, _max_sel, _step) \ + [idx] = { \ + .min = _min, \ + .min_sel = _min_sel, \ + .max_sel = _max_sel, \ + .step = _step, \ + } + +static const struct linear_range mt6360_chg_range[MT6360_RANGE_MAX] = { + MT6360_LINEAR_RANGE(MT6360_RANGE_VMIVR, 3900000, 0, 0x5F, 100000), + MT6360_LINEAR_RANGE(MT6360_RANGE_ICHG, 100000, 0, 0x31, 100000), + MT6360_LINEAR_RANGE(MT6360_RANGE_VOREG, 3900000, 0, 0x51, 10000), + MT6360_LINEAR_RANGE(MT6360_RANGE_AICR, 100000, 0, 0x3F, 50000), + MT6360_LINEAR_RANGE(MT6360_RANGE_IPREC, 100000, 0, 0x0F, 50000), + MT6360_LINEAR_RANGE(MT6360_RANGE_IEOC, 100000, 0, 0x0F, 50000), +}; + +struct mt6360_chg_info { + struct device *dev; + struct regmap *regmap; + struct power_supply_desc psy_desc; + struct power_supply *psy; + struct regulator_dev *otg_rdev; + struct mutex chgdet_lock; + u32 vinovp; + bool pwr_rdy; + bool bc12_en; + int psy_usb_type; + struct work_struct chrdet_work; +}; + +enum mt6360_iinlmtsel { + MT6360_IINLMTSEL_AICR_3250 = 0, + MT6360_IINLMTSEL_CHG_TYPE, + MT6360_IINLMTSEL_AICR, + MT6360_IINLMTSEL_LOWER_LEVEL, +}; + +enum mt6360_pmu_chg_type { + MT6360_CHG_TYPE_NOVBUS = 0, + MT6360_CHG_TYPE_UNDER_GOING, + MT6360_CHG_TYPE_SDP, + MT6360_CHG_TYPE_SDPNSTD, + MT6360_CHG_TYPE_DCP, + MT6360_CHG_TYPE_CDP, + MT6360_CHG_TYPE_DISABLE_BC12, + MT6360_CHG_TYPE_MAX, +}; + +static enum power_supply_usb_type mt6360_charger_usb_types[] = { + POWER_SUPPLY_USB_TYPE_UNKNOWN, + POWER_SUPPLY_USB_TYPE_SDP, + POWER_SUPPLY_USB_TYPE_DCP, + POWER_SUPPLY_USB_TYPE_CDP, +}; + +static int mt6360_get_chrdet_ext_stat(struct mt6360_chg_info *mci, + bool *pwr_rdy) +{ + int ret; + unsigned int regval; + + ret = regmap_read(mci->regmap, MT6360_PMU_FOD_STAT, ®val); + if (ret < 0) + return ret; + *pwr_rdy = (regval & MT6360_CHRDET_EXT_MASK) ? true : false; + return 0; +} + +static int mt6360_charger_get_online(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + int ret; + bool pwr_rdy; + + ret = mt6360_get_chrdet_ext_stat(mci, &pwr_rdy); + if (ret < 0) + return ret; + val->intval = pwr_rdy ? true : false; + return 0; +} + +static int mt6360_charger_get_status(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + int status, ret; + unsigned int regval; + bool pwr_rdy; + + ret = mt6360_get_chrdet_ext_stat(mci, &pwr_rdy); + if (ret < 0) + return ret; + if (!pwr_rdy) { + status = POWER_SUPPLY_STATUS_DISCHARGING; + goto out; + } + + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_STAT, ®val); + if (ret < 0) + return ret; + regval &= MT6360_CHG_STAT_MASK; + regval >>= MT6360_CHG_STAT_SHFT; + switch (regval) { + case 0x0: + status = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case 0x1: + status = POWER_SUPPLY_STATUS_CHARGING; + break; + case 0x2: + status = POWER_SUPPLY_STATUS_FULL; + break; + default: + ret = -EIO; + } +out: + if (!ret) + val->intval = status; + return ret; +} + +static int mt6360_charger_get_charge_type(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + int type, ret; + unsigned int regval; + u8 chg_stat; + + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_STAT, ®val); + if (ret < 0) + return ret; + + chg_stat = (regval & MT6360_CHG_STAT_MASK) >> MT6360_CHG_STAT_SHFT; + switch (chg_stat) { + case 0x01: /* Charge in Progress */ + if (regval & MT6360_VBAT_LVL_MASK) + type = POWER_SUPPLY_CHARGE_TYPE_FAST; + else + type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case 0x00: /* Not Charging */ + case 0x02: /* Charge Done */ + case 0x03: /* Charge Fault */ + default: + type = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + } + + val->intval = type; + return 0; +} + +static int mt6360_charger_get_ichg(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + int ret; + u32 sel, value; + + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL7, &sel); + if (ret < 0) + return ret; + sel = (sel & MT6360_ICHG_MASK) >> MT6360_ICHG_SHFT; + ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_ICHG], sel, &value); + if (!ret) + val->intval = value; + return ret; +} + +static int mt6360_charger_get_max_ichg(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + val->intval = 5000000; + return 0; +} + +static int mt6360_charger_get_cv(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + int ret; + u32 sel, value; + + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL4, &sel); + if (ret < 0) + return ret; + sel = (sel & MT6360_VOREG_MASK) >> MT6360_VOREG_SHFT; + ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_VOREG], sel, &value); + if (!ret) + val->intval = value; + return ret; +} + +static int mt6360_charger_get_max_cv(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + val->intval = 4710000; + return 0; +} + +static int mt6360_charger_get_aicr(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + int ret; + u32 sel, value; + + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL3, &sel); + if (ret < 0) + return ret; + sel = (sel & MT6360_IAICR_MASK) >> MT6360_IAICR_SHFT; + ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_AICR], sel, &value); + if (!ret) + val->intval = value; + return ret; +} + +static int mt6360_charger_get_mivr(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + int ret; + u32 sel, value; + + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL6, &sel); + if (ret < 0) + return ret; + sel = (sel & MT6360_VMIVR_MASK) >> MT6360_VMIVR_SHFT; + ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_VMIVR], sel, &value); + if (!ret) + val->intval = value; + return ret; +} + +static int mt6360_charger_get_iprechg(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + int ret; + u32 sel, value; + + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL8, &sel); + if (ret < 0) + return ret; + sel = (sel & MT6360_IPREC_MASK) >> MT6360_IPREC_SHFT; + ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_IPREC], sel, &value); + if (!ret) + val->intval = value; + return ret; +} + +static int mt6360_charger_get_ieoc(struct mt6360_chg_info *mci, + union power_supply_propval *val) +{ + int ret; + u32 sel, value; + + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL9, &sel); + if (ret < 0) + return ret; + sel = (sel & MT6360_IEOC_MASK) >> MT6360_IEOC_SHFT; + ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_IEOC], sel, &value); + if (!ret) + val->intval = value; + return ret; +} + +static int mt6360_charger_set_online(struct mt6360_chg_info *mci, + const union power_supply_propval *val) +{ + u8 force_sleep = val->intval ? 0 : 1; + + return regmap_update_bits(mci->regmap, + MT6360_PMU_CHG_CTRL1, + MT6360_FSLP_MASK, + force_sleep << MT6360_FSLP_SHFT); +} + +static int mt6360_charger_set_ichg(struct mt6360_chg_info *mci, + const union power_supply_propval *val) +{ + u32 sel; + + linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_ICHG], val->intval, &sel); + return regmap_update_bits(mci->regmap, + MT6360_PMU_CHG_CTRL7, + MT6360_ICHG_MASK, + sel << MT6360_ICHG_SHFT); +} + +static int mt6360_charger_set_cv(struct mt6360_chg_info *mci, + const union power_supply_propval *val) +{ + u32 sel; + + linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_VOREG], val->intval, &sel); + return regmap_update_bits(mci->regmap, + MT6360_PMU_CHG_CTRL4, + MT6360_VOREG_MASK, + sel << MT6360_VOREG_SHFT); +} + +static int mt6360_charger_set_aicr(struct mt6360_chg_info *mci, + const union power_supply_propval *val) +{ + u32 sel; + + linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_AICR], val->intval, &sel); + return regmap_update_bits(mci->regmap, + MT6360_PMU_CHG_CTRL3, + MT6360_IAICR_MASK, + sel << MT6360_IAICR_SHFT); +} + +static int mt6360_charger_set_mivr(struct mt6360_chg_info *mci, + const union power_supply_propval *val) +{ + u32 sel; + + linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_VMIVR], val->intval, &sel); + return regmap_update_bits(mci->regmap, + MT6360_PMU_CHG_CTRL3, + MT6360_VMIVR_MASK, + sel << MT6360_VMIVR_SHFT); +} + +static int mt6360_charger_set_iprechg(struct mt6360_chg_info *mci, + const union power_supply_propval *val) +{ + u32 sel; + + linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_IPREC], val->intval, &sel); + return regmap_update_bits(mci->regmap, + MT6360_PMU_CHG_CTRL8, + MT6360_IPREC_MASK, + sel << MT6360_IPREC_SHFT); +} + +static int mt6360_charger_set_ieoc(struct mt6360_chg_info *mci, + const union power_supply_propval *val) +{ + u32 sel; + + linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_IEOC], val->intval, &sel); + return regmap_update_bits(mci->regmap, + MT6360_PMU_CHG_CTRL9, + MT6360_IEOC_MASK, + sel << MT6360_IEOC_SHFT); +} + +static int mt6360_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct mt6360_chg_info *mci = power_supply_get_drvdata(psy); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = mt6360_charger_get_online(mci, val); + break; + case POWER_SUPPLY_PROP_STATUS: + ret = mt6360_charger_get_status(mci, val); + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + ret = mt6360_charger_get_charge_type(mci, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = mt6360_charger_get_ichg(mci, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + ret = mt6360_charger_get_max_ichg(mci, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = mt6360_charger_get_cv(mci, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + ret = mt6360_charger_get_max_cv(mci, val); + break; + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = mt6360_charger_get_aicr(mci, val); + break; + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT: + ret = mt6360_charger_get_mivr(mci, val); + break; + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: + ret = mt6360_charger_get_iprechg(mci, val); + break; + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: + ret = mt6360_charger_get_ieoc(mci, val); + break; + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = mci->psy_usb_type; + break; + default: + ret = -ENODATA; + } + return ret; +} + +static int mt6360_charger_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct mt6360_chg_info *mci = power_supply_get_drvdata(psy); + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + ret = mt6360_charger_set_online(mci, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = mt6360_charger_set_ichg(mci, val); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = mt6360_charger_set_cv(mci, val); + break; + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = mt6360_charger_set_aicr(mci, val); + break; + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT: + ret = mt6360_charger_set_mivr(mci, val); + break; + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: + ret = mt6360_charger_set_iprechg(mci, val); + break; + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: + ret = mt6360_charger_set_ieoc(mci, val); + break; + default: + ret = -EINVAL; + } + return ret; +} + +static int mt6360_charger_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT: + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: + return 1; + default: + return 0; + } +} + +static enum power_supply_property mt6360_charger_properties[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, + POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT, + POWER_SUPPLY_PROP_PRECHARGE_CURRENT, + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, + POWER_SUPPLY_PROP_USB_TYPE, +}; + +static const struct power_supply_desc mt6360_charger_desc = { + .type = POWER_SUPPLY_TYPE_USB, + .properties = mt6360_charger_properties, + .num_properties = ARRAY_SIZE(mt6360_charger_properties), + .get_property = mt6360_charger_get_property, + .set_property = mt6360_charger_set_property, + .property_is_writeable = mt6360_charger_property_is_writeable, + .usb_types = mt6360_charger_usb_types, + .num_usb_types = ARRAY_SIZE(mt6360_charger_usb_types), +}; + +static const struct regulator_ops mt6360_chg_otg_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_desc mt6360_otg_rdesc = { + .of_match = "usb-otg-vbus", + .name = "usb-otg-vbus", + .ops = &mt6360_chg_otg_ops, + .owner = THIS_MODULE, + .type = REGULATOR_VOLTAGE, + .min_uV = 4425000, + .uV_step = 25000, + .n_voltages = 57, + .vsel_reg = MT6360_PMU_CHG_CTRL5, + .vsel_mask = MT6360_VOBST_MASK, + .enable_reg = MT6360_PMU_CHG_CTRL1, + .enable_mask = MT6360_OPA_MODE_MASK, +}; + +static irqreturn_t mt6360_pmu_attach_i_handler(int irq, void *data) +{ + struct mt6360_chg_info *mci = data; + int ret; + unsigned int usb_status; + int last_usb_type; + + mutex_lock(&mci->chgdet_lock); + if (!mci->bc12_en) { + dev_warn(mci->dev, "Received attach interrupt, bc12 disabled, ignore irq\n"); + goto out; + } + last_usb_type = mci->psy_usb_type; + /* Plug in */ + ret = regmap_read(mci->regmap, MT6360_PMU_USB_STATUS1, &usb_status); + if (ret < 0) + goto out; + usb_status &= MT6360_USB_STATUS_MASK; + usb_status >>= MT6360_USB_STATUS_SHFT; + switch (usb_status) { + case MT6360_CHG_TYPE_NOVBUS: + dev_dbg(mci->dev, "Received attach interrupt, no vbus\n"); + goto out; + case MT6360_CHG_TYPE_UNDER_GOING: + dev_dbg(mci->dev, "Received attach interrupt, under going...\n"); + goto out; + case MT6360_CHG_TYPE_SDP: + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP; + break; + case MT6360_CHG_TYPE_SDPNSTD: + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP; + break; + case MT6360_CHG_TYPE_CDP: + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP; + break; + case MT6360_CHG_TYPE_DCP: + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP; + break; + case MT6360_CHG_TYPE_DISABLE_BC12: + dev_dbg(mci->dev, "Received attach interrupt, bc12 detect not enable\n"); + goto out; + default: + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN; + dev_dbg(mci->dev, "Received attach interrupt, reserved address\n"); + goto out; + } + + dev_dbg(mci->dev, "Received attach interrupt, chg_type = %d\n", mci->psy_usb_type); + if (last_usb_type != mci->psy_usb_type) + power_supply_changed(mci->psy); +out: + mutex_unlock(&mci->chgdet_lock); + return IRQ_HANDLED; +} + +static void mt6360_handle_chrdet_ext_evt(struct mt6360_chg_info *mci) +{ + int ret; + bool pwr_rdy; + + mutex_lock(&mci->chgdet_lock); + ret = mt6360_get_chrdet_ext_stat(mci, &pwr_rdy); + if (ret < 0) + goto out; + if (mci->pwr_rdy == pwr_rdy) { + dev_dbg(mci->dev, "Received vbus interrupt, pwr_rdy is same(%d)\n", pwr_rdy); + goto out; + } + mci->pwr_rdy = pwr_rdy; + dev_dbg(mci->dev, "Received vbus interrupt, pwr_rdy = %d\n", pwr_rdy); + if (!pwr_rdy) { + mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN; + power_supply_changed(mci->psy); + + } + ret = regmap_update_bits(mci->regmap, + MT6360_PMU_DEVICE_TYPE, + MT6360_USBCHGEN_MASK, + pwr_rdy ? MT6360_USBCHGEN_MASK : 0); + if (ret < 0) + goto out; + mci->bc12_en = pwr_rdy; +out: + mutex_unlock(&mci->chgdet_lock); +} + +static void mt6360_chrdet_work(struct work_struct *work) +{ + struct mt6360_chg_info *mci = (struct mt6360_chg_info *)container_of( + work, struct mt6360_chg_info, chrdet_work); + + mt6360_handle_chrdet_ext_evt(mci); +} + +static irqreturn_t mt6360_pmu_chrdet_ext_evt_handler(int irq, void *data) +{ + struct mt6360_chg_info *mci = data; + + mt6360_handle_chrdet_ext_evt(mci); + return IRQ_HANDLED; +} + +static int mt6360_chg_irq_register(struct platform_device *pdev) +{ + const struct { + const char *name; + irq_handler_t handler; + } irq_descs[] = { + { "attach_i", mt6360_pmu_attach_i_handler }, + { "chrdet_ext_evt", mt6360_pmu_chrdet_ext_evt_handler } + }; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(irq_descs); i++) { + ret = platform_get_irq_byname(pdev, irq_descs[i].name); + if (ret < 0) + return ret; + + ret = devm_request_threaded_irq(&pdev->dev, ret, NULL, + irq_descs[i].handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + irq_descs[i].name, + platform_get_drvdata(pdev)); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, "Failed to request %s irq\n", + irq_descs[i].name); + } + + return 0; +} + +static u32 mt6360_vinovp_trans_to_sel(u32 val) +{ + u32 vinovp_tbl[] = { 5500000, 6500000, 11000000, 14500000 }; + int i; + + /* Select the smaller and equal supported value */ + for (i = 0; i < ARRAY_SIZE(vinovp_tbl)-1; i++) { + if (val < vinovp_tbl[i+1]) + break; + } + return i; +} + +static int mt6360_chg_init_setting(struct mt6360_chg_info *mci) +{ + int ret; + u32 sel; + + sel = mt6360_vinovp_trans_to_sel(mci->vinovp); + ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL19, + MT6360_VINOVP_MASK, sel << MT6360_VINOVP_SHFT); + if (ret) + return dev_err_probe(mci->dev, ret, "%s: Failed to apply vinovp\n", __func__); + ret = regmap_update_bits(mci->regmap, MT6360_PMU_DEVICE_TYPE, + MT6360_USBCHGEN_MASK, 0); + if (ret) + return dev_err_probe(mci->dev, ret, "%s: Failed to disable bc12\n", __func__); + ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL2, + MT6360_IINLMTSEL_MASK, + MT6360_IINLMTSEL_AICR << + MT6360_IINLMTSEL_SHFT); + if (ret) + return dev_err_probe(mci->dev, ret, + "%s: Failed to switch iinlmtsel to aicr\n", __func__); + usleep_range(5000, 6000); + ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL3, + MT6360_ILIM_EN_MASK, 0); + if (ret) + return dev_err_probe(mci->dev, ret, + "%s: Failed to disable ilim\n", __func__); + ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL10, + MT6360_OTG_OC_MASK, MT6360_OTG_OC_MASK); + if (ret) + return dev_err_probe(mci->dev, ret, + "%s: Failed to config otg oc to 3A\n", __func__); + return 0; +} + +static int mt6360_charger_probe(struct platform_device *pdev) +{ + struct mt6360_chg_info *mci; + struct power_supply_config charger_cfg = {}; + struct regulator_config config = { }; + int ret; + + mci = devm_kzalloc(&pdev->dev, sizeof(*mci), GFP_KERNEL); + if (!mci) + return -ENOMEM; + + mci->dev = &pdev->dev; + mci->vinovp = 6500000; + mutex_init(&mci->chgdet_lock); + platform_set_drvdata(pdev, mci); + INIT_WORK(&mci->chrdet_work, &mt6360_chrdet_work); + + ret = device_property_read_u32(&pdev->dev, "richtek,vinovp-microvolt", &mci->vinovp); + if (ret) + dev_warn(&pdev->dev, "Failed to parse vinovp in DT, keep default 6.5v\n"); + + mci->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!mci->regmap) + return dev_err_probe(&pdev->dev, -ENODEV, "Failed to get parent regmap\n"); + + ret = mt6360_chg_init_setting(mci); + if (ret) + return dev_err_probe(&pdev->dev, ret, "Failed to initial setting\n"); + + memcpy(&mci->psy_desc, &mt6360_charger_desc, sizeof(mci->psy_desc)); + mci->psy_desc.name = dev_name(&pdev->dev); + charger_cfg.drv_data = mci; + charger_cfg.of_node = pdev->dev.of_node; + mci->psy = devm_power_supply_register(&pdev->dev, + &mci->psy_desc, &charger_cfg); + if (IS_ERR(mci->psy)) + return dev_err_probe(&pdev->dev, PTR_ERR(mci->psy), + "Failed to register power supply dev\n"); + + + ret = mt6360_chg_irq_register(pdev); + if (ret) + return dev_err_probe(&pdev->dev, ret, "Failed to register irqs\n"); + + config.dev = &pdev->dev; + config.regmap = mci->regmap; + mci->otg_rdev = devm_regulator_register(&pdev->dev, &mt6360_otg_rdesc, + &config); + if (IS_ERR(mci->otg_rdev)) + return PTR_ERR(mci->otg_rdev); + + schedule_work(&mci->chrdet_work); + + return 0; +} + +static int mt6360_charger_remove(struct platform_device *pdev) +{ + struct mt6360_chg_info *mci = platform_get_drvdata(pdev); + + cancel_work_sync(&mci->chrdet_work); + + return 0; +} + +static const struct of_device_id __maybe_unused mt6360_charger_of_id[] = { + { .compatible = "mediatek,mt6360-chg", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mt6360_charger_of_id); + +static const struct platform_device_id mt6360_charger_id[] = { + { "mt6360-chg", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(platform, mt6360_charger_id); + +static struct platform_driver mt6360_charger_driver = { + .driver = { + .name = "mt6360-chg", + .of_match_table = of_match_ptr(mt6360_charger_of_id), + }, + .probe = mt6360_charger_probe, + .remove = mt6360_charger_remove, + .id_table = mt6360_charger_id, +}; +module_platform_driver(mt6360_charger_driver); + +MODULE_AUTHOR("Gene Chen <gene_chen@richtek.com>"); +MODULE_DESCRIPTION("MT6360 Charger Driver"); +MODULE_LICENSE("GPL"); -- 2.25.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v5 3/3] power: supply: mt6360_charger: add MT6360 charger support 2021-05-28 8:13 ` [PATCH v5 3/3] power: supply: mt6360_charger: add MT6360 charger support Gene Chen @ 2021-05-28 9:47 ` Matti Vaittinen 2021-05-31 3:39 ` Gene Chen 2021-05-28 16:22 ` Randy Dunlap 1 sibling, 1 reply; 9+ messages in thread From: Matti Vaittinen @ 2021-05-28 9:47 UTC (permalink / raw) To: Gene Chen, sre, matthias.bgg Cc: broonie, robh+dt, devicetree, inux-pm, linux-arm-kernel, linux-mediatek, linux-kernel, rdunlap, gene_chen, Wilma.Wu, shufan_lee, cy_huang, benjamin.chao On Fri, 2021-05-28 at 16:13 +0800, Gene Chen wrote: > From: Gene Chen <gene_chen@richtek.com> > > Add basic support for the battery charger for MT6360 PMIC > > Signed-off-by: Gene Chen <gene_chen@richtek.com> > --- > drivers/power/supply/Kconfig | 11 + > drivers/power/supply/Makefile | 1 + > drivers/power/supply/mt6360_charger.c | 856 > ++++++++++++++++++++++++++ > 3 files changed, 868 insertions(+) > create mode 100644 drivers/power/supply/mt6360_charger.c > > diff --git a/drivers/power/supply/Kconfig > b/drivers/power/supply/Kconfig > index e696364126f1..3257b1ad5e36 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -577,6 +577,17 @@ config CHARGER_MP2629 > Battery charger. This driver provides Battery charger power > management > functions on the systems. > > +config CHARGER_MT6360 > + tristate "Mediatek MT6360 Charger Driver" > + depends on MFD_MT6360 > + depends on REGULATOR > + select LINEAR_RANGES > + help > + Say Y here to enable MT6360 Charger Part. > + The device supports High-Accuracy Voltage/Current Regulation, > + Average Input Current Regulation, Battery Tempature Sensing, > + Over-Temperature Protection, DPDM Detection for BC1.2 > + > config CHARGER_QCOM_SMBB > tristate "Qualcomm Switch-Mode Battery Charger and Boost" > depends on MFD_SPMI_PMIC || COMPILE_TEST > diff --git a/drivers/power/supply/Makefile > b/drivers/power/supply/Makefile > index a7309a3d1a47..5317fe787149 100644 > --- a/drivers/power/supply/Makefile > +++ b/drivers/power/supply/Makefile > @@ -78,6 +78,7 @@ obj-$(CONFIG_CHARGER_MAX77693) += > max77693_charger.o > obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o > obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o > obj-$(CONFIG_CHARGER_MP2629) += mp2629_charger.o > +obj-$(CONFIG_CHARGER_MT6360) += mt6360_charger.o > obj-$(CONFIG_CHARGER_QCOM_SMBB) += qcom_smbb.o > obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o > obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o > diff --git a/drivers/power/supply/mt6360_charger.c > b/drivers/power/supply/mt6360_charger.c > new file mode 100644 > index 000000000000..07fa0b3870e0 > --- /dev/null > +++ b/drivers/power/supply/mt6360_charger.c > @@ -0,0 +1,856 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2021 MediaTek Inc. > + */ > + > +#include <linux/init.h> > +#include <linux/interrupt.h> > +#include <linux/kernel.h> > +#include <linux/linear_range.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/power_supply.h> > +#include <linux/property.h> > +#include <linux/regmap.h> > +#include <linux/regulator/driver.h> > + > +#define MT6360_PMU_CHG_CTRL1 0x311 > +#define MT6360_PMU_CHG_CTRL2 0x312 > +#define MT6360_PMU_CHG_CTRL3 0x313 > +#define MT6360_PMU_CHG_CTRL4 0x314 > +#define MT6360_PMU_CHG_CTRL5 0x315 > +#define MT6360_PMU_CHG_CTRL6 0x316 > +#define MT6360_PMU_CHG_CTRL7 0x317 > +#define MT6360_PMU_CHG_CTRL8 0x318 > +#define MT6360_PMU_CHG_CTRL9 0x319 > +#define MT6360_PMU_CHG_CTRL10 0x31A > +#define MT6360_PMU_DEVICE_TYPE 0x322 > +#define MT6360_PMU_USB_STATUS1 0x327 > +#define MT6360_PMU_CHG_STAT 0x34A > +#define MT6360_PMU_CHG_CTRL19 0x361 > +#define MT6360_PMU_FOD_STAT 0x3E7 > + > +/* MT6360_PMU_CHG_CTRL1 */ > +#define MT6360_FSLP_SHFT (3) > +#define MT6360_FSLP_MASK BIT(MT6360_FSLP_SHFT) > +#define MT6360_OPA_MODE_SHFT (0) > +#define MT6360_OPA_MODE_MASK BIT(MT6360_OPA_MODE_SHFT) > +/* MT6360_PMU_CHG_CTRL2 */ > +#define MT6360_IINLMTSEL_SHFT (2) > +#define MT6360_IINLMTSEL_MASK GENMASK(3, 2) > +/* MT6360_PMU_CHG_CTRL3 */ > +#define MT6360_IAICR_SHFT (2) > +#define MT6360_IAICR_MASK GENMASK(7, 2) > +#define MT6360_ILIM_EN_MASK BIT(0) > +/* MT6360_PMU_CHG_CTRL4 */ > +#define MT6360_VOREG_SHFT (1) > +#define MT6360_VOREG_MASK GENMASK(7, 1) > +/* MT6360_PMU_CHG_CTRL5 */ > +#define MT6360_VOBST_MASK GENMASK(7, 2) > +/* MT6360_PMU_CHG_CTRL6 */ > +#define MT6360_VMIVR_SHFT (1) > +#define MT6360_VMIVR_MASK GENMASK(7, 1) > +/* MT6360_PMU_CHG_CTRL7 */ > +#define MT6360_ICHG_SHFT (2) > +#define MT6360_ICHG_MASK GENMASK(7, 2) > +/* MT6360_PMU_CHG_CTRL8 */ > +#define MT6360_IPREC_SHFT (0) > +#define MT6360_IPREC_MASK GENMASK(3, 0) > +/* MT6360_PMU_CHG_CTRL9 */ > +#define MT6360_IEOC_SHFT (4) > +#define MT6360_IEOC_MASK GENMASK(7, 4) > +/* MT6360_PMU_CHG_CTRL10 */ > +#define MT6360_OTG_OC_MASK GENMASK(3, 0) > +/* MT6360_PMU_DEVICE_TYPE */ > +#define MT6360_USBCHGEN_MASK BIT(7) > +/* MT6360_PMU_USB_STATUS1 */ > +#define MT6360_USB_STATUS_SHFT (4) > +#define MT6360_USB_STATUS_MASK GENMASK(6, 4) > +/* MT6360_PMU_CHG_STAT */ > +#define MT6360_CHG_STAT_SHFT (6) > +#define MT6360_CHG_STAT_MASK GENMASK(7, 6) > +#define MT6360_VBAT_LVL_MASK BIT(5) > +/* MT6360_PMU_CHG_CTRL19 */ > +#define MT6360_VINOVP_SHFT (5) > +#define MT6360_VINOVP_MASK GENMASK(6, 5) > +/* MT6360_PMU_FOD_STAT */ > +#define MT6360_CHRDET_EXT_MASK BIT(4) > + > +enum { > + MT6360_RANGE_VMIVR, > + MT6360_RANGE_ICHG, > + MT6360_RANGE_VOREG, > + MT6360_RANGE_AICR, > + MT6360_RANGE_IPREC, > + MT6360_RANGE_IEOC, > + MT6360_RANGE_MAX, > +}; > + > +#define MT6360_LINEAR_RANGE(idx, _min, _min_sel, _max_sel, _step) > \ > + [idx] = { \ > + .min = _min, > \ > + .min_sel = _min_sel, > \ > + .max_sel = _max_sel, > \ > + .step = _step, > \ > + } > Do you think REGULATOR_LINEAR_RANGE() would fit this? Or is the naming a problem there? (Just a minor thing, no need to re-spin for this) //snip > +static int mt6360_charger_probe(struct platform_device *pdev) > +{ > + struct mt6360_chg_info *mci; > + struct power_supply_config charger_cfg = {}; > + struct regulator_config config = { }; > + int ret; > + > + mci = devm_kzalloc(&pdev->dev, sizeof(*mci), GFP_KERNEL); > + if (!mci) > + return -ENOMEM; > + > + mci->dev = &pdev->dev; > + mci->vinovp = 6500000; > + mutex_init(&mci->chgdet_lock); > + platform_set_drvdata(pdev, mci); > + INIT_WORK(&mci->chrdet_work, &mt6360_chrdet_work); //snip > + > +static int mt6360_charger_remove(struct platform_device *pdev) > +{ > + struct mt6360_chg_info *mci = platform_get_drvdata(pdev); > + > + cancel_work_sync(&mci->chrdet_work); > + > + return 0; > +} Just as a note, devm_work_autocancel() should hopefully be included at next cycle. Then you might be able to drop the .remove(). FWIW: Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Best Regards Matti Vaittinen ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v5 3/3] power: supply: mt6360_charger: add MT6360 charger support 2021-05-28 9:47 ` Matti Vaittinen @ 2021-05-31 3:39 ` Gene Chen 2021-07-16 13:48 ` Sebastian Reichel 0 siblings, 1 reply; 9+ messages in thread From: Gene Chen @ 2021-05-31 3:39 UTC (permalink / raw) To: Vaittinen, Matti Cc: sre, Matthias Brugger, Mark Brown, Rob Herring, devicetree, inux-pm, linux-arm Mailing List, moderated list:ARM/Mediatek SoC support, Linux Kernel Mailing List, Randy Dunlap, Gene Chen, Wilma.Wu, shufan_lee, ChiYuan Huang, benjamin.chao is is Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> 於 2021年5月28日 週五 下午5:47寫道: > > > On Fri, 2021-05-28 at 16:13 +0800, Gene Chen wrote: > > From: Gene Chen <gene_chen@richtek.com> > > > > Add basic support for the battery charger for MT6360 PMIC > > > > Signed-off-by: Gene Chen <gene_chen@richtek.com> > > --- > > drivers/power/supply/Kconfig | 11 + > > drivers/power/supply/Makefile | 1 + > > drivers/power/supply/mt6360_charger.c | 856 > > ++++++++++++++++++++++++++ > > 3 files changed, 868 insertions(+) > > create mode 100644 drivers/power/supply/mt6360_charger.c > > > > diff --git a/drivers/power/supply/Kconfig > > b/drivers/power/supply/Kconfig > > index e696364126f1..3257b1ad5e36 100644 11 > > --- a/drivers/power/supply/Kconfig > > +++ b/drivers/power/supply/Kconfig > > @@ -577,6 +577,17 @@ config CHARGER_MP2629 > > Battery charger. This driver provides Battery charger power > > management > > functions on the systems. > > > > +config CHARGER_MT6360 > > + tristate "Mediatek MT6360 Charger Driver" > > + depends on MFD_MT6360 > > + depends on REGULATOR > > + select LINEAR_RANGES > > + help > > + Say Y here to enable MT6360 Charger Part. > > + The device supports High-Accuracy Voltage/Current Regulation, > > + Average Input Current Regulation, Battery Tempature Sensing, > > + Over-Temperature Protection, DPDM Detection for BC1.2 > > + > > config CHARGER_QCOM_SMBB > > tristate "Qualcomm Switch-Mode Battery Charger and Boost" > > depends on MFD_SPMI_PMIC || COMPILE_TEST > > diff --git a/drivers/power/supply/Makefile > > b/drivers/power/supply/Makefile > > index a7309a3d1a47..5317fe787149 100644 > > --- a/drivers/power/supply/Makefile > > +++ b/drivers/power/supply/Makefile > > @@ -78,6 +78,7 @@ obj-$(CONFIG_CHARGER_MAX77693) += > > max77693_charger.o > > obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o > > obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o > > obj-$(CONFIG_CHARGER_MP2629) += mp2629_charger.o > > +obj-$(CONFIG_CHARGER_MT6360) += mt6360_charger.o > > obj-$(CONFIG_CHARGER_QCOM_SMBB) += qcom_smbb.o > > obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o > > obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o > > diff --git a/drivers/power/supply/mt6360_charger.c > > b/drivers/power/supply/mt6360_charger.c > > new file mode 100644 > > index 000000000000..07fa0b3870e0 > > --- /dev/null > > +++ b/drivers/power/supply/mt6360_charger.c > > @@ -0,0 +1,856 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (c) 2021 MediaTek Inc. > > + */ > > + > > +#include <linux/init.h> > > +#include <linux/interrupt.h> > > +#include <linux/kernel.h> > > +#include <linux/linear_range.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/platform_device.h> > > +#include <linux/power_supply.h> > > +#include <linux/property.h> > > +#include <linux/regmap.h> > > +#include <linux/regulator/driver.h> > > + > > +#define MT6360_PMU_CHG_CTRL1 0x311 > > +#define MT6360_PMU_CHG_CTRL2 0x312 > > +#define MT6360_PMU_CHG_CTRL3 0x313 > > +#define MT6360_PMU_CHG_CTRL4 0x314 > > +#define MT6360_PMU_CHG_CTRL5 0x315 > > +#define MT6360_PMU_CHG_CTRL6 0x316 > > +#define MT6360_PMU_CHG_CTRL7 0x317 > > +#define MT6360_PMU_CHG_CTRL8 0x318 > > +#define MT6360_PMU_CHG_CTRL9 0x319 > > +#define MT6360_PMU_CHG_CTRL10 0x31A > > +#define MT6360_PMU_DEVICE_TYPE 0x322 > > +#define MT6360_PMU_USB_STATUS1 0x327 > > +#define MT6360_PMU_CHG_STAT 0x34A > > +#define MT6360_PMU_CHG_CTRL19 0x361 > > +#define MT6360_PMU_FOD_STAT 0x3E7 > > + > > +/* MT6360_PMU_CHG_CTRL1 */ > > +#define MT6360_FSLP_SHFT (3) > > +#define MT6360_FSLP_MASK BIT(MT6360_FSLP_SHFT) > > +#define MT6360_OPA_MODE_SHFT (0) > > +#define MT6360_OPA_MODE_MASK BIT(MT6360_OPA_MODE_SHFT) > > +/* MT6360_PMU_CHG_CTRL2 */ > > +#define MT6360_IINLMTSEL_SHFT (2) > > +#define MT6360_IINLMTSEL_MASK GENMASK(3, 2) > > +/* MT6360_PMU_CHG_CTRL3 */ > > +#define MT6360_IAICR_SHFT (2) > > +#define MT6360_IAICR_MASK GENMASK(7, 2) > > +#define MT6360_ILIM_EN_MASK BIT(0) > > +/* MT6360_PMU_CHG_CTRL4 */ > > +#define MT6360_VOREG_SHFT (1) > > +#define MT6360_VOREG_MASK GENMASK(7, 1) > > +/* MT6360_PMU_CHG_CTRL5 */ > > +#define MT6360_VOBST_MASK GENMASK(7, 2) > > +/* MT6360_PMU_CHG_CTRL6 */ > > +#define MT6360_VMIVR_SHFT (1) > > +#define MT6360_VMIVR_MASK GENMASK(7, 1) > > +/* MT6360_PMU_CHG_CTRL7 */ > > +#define MT6360_ICHG_SHFT (2) > > +#define MT6360_ICHG_MASK GENMASK(7, 2) > > +/* MT6360_PMU_CHG_CTRL8 */ > > +#define MT6360_IPREC_SHFT (0) > > +#define MT6360_IPREC_MASK GENMASK(3, 0) > > +/* MT6360_PMU_CHG_CTRL9 */ > > +#define MT6360_IEOC_SHFT (4) > > +#define MT6360_IEOC_MASK GENMASK(7, 4) > > +/* MT6360_PMU_CHG_CTRL10 */ > > +#define MT6360_OTG_OC_MASK GENMASK(3, 0) > > +/* MT6360_PMU_DEVICE_TYPE */ > > +#define MT6360_USBCHGEN_MASK BIT(7) > > +/* MT6360_PMU_USB_STATUS1 */ > > +#define MT6360_USB_STATUS_SHFT (4) > > +#define MT6360_USB_STATUS_MASK GENMASK(6, 4) > > +/* MT6360_PMU_CHG_STAT */ > > +#define MT6360_CHG_STAT_SHFT (6) > > +#define MT6360_CHG_STAT_MASK GENMASK(7, 6) > > +#define MT6360_VBAT_LVL_MASK BIT(5) > > +/* MT6360_PMU_CHG_CTRL19 */ > > +#define MT6360_VINOVP_SHFT (5) > > +#define MT6360_VINOVP_MASK GENMASK(6, 5) > > +/* MT6360_PMU_FOD_STAT */ > > +#define MT6360_CHRDET_EXT_MASK BIT(4) > > + > > +enum { > > + MT6360_RANGE_VMIVR, > > + MT6360_RANGE_ICHG, > > + MT6360_RANGE_VOREG, > > + MT6360_RANGE_AICR, > > + MT6360_RANGE_IPREC, > > + MT6360_RANGE_IEOC, > > + MT6360_RANGE_MAX, > > +}; > > + > > +#define MT6360_LINEAR_RANGE(idx, _min, _min_sel, _max_sel, _step) > > \ > > + [idx] = { \ > > + .min = _min, > > \ > > + .min_sel = _min_sel, > > \ > > + .max_sel = _max_sel, > > \ > > + .step = _step, > > \ > > + } > > > > Do you think REGULATOR_LINEAR_RANGE() would fit this? Or is the naming > a problem there? (Just a minor thing, no need to re-spin for this) > Yes, it is fit for this but REGULATOR_LINEAR_RANGE is used for regulator which is defined in regulator/driver.h. I think it's better to defined ours and add idx for easy to read. Is it better to re-use REGULATOR_LINEAR_RANGE? > //snip > > > +static int mt6360_charger_probe(struct platform_device *pdev) > > +{ > > + struct mt6360_chg_info *mci; > > + struct power_supply_config charger_cfg = {}; > > + struct regulator_config config = { }; > > + int ret; > > + > > + mci = devm_kzalloc(&pdev->dev, sizeof(*mci), GFP_KERNEL); > > + if (!mci) > > + return -ENOMEM; > > + > > + mci->dev = &pdev->dev; > > + mci->vinovp = 6500000; > > + mutex_init(&mci->chgdet_lock); > > + platform_set_drvdata(pdev, mci); > > + INIT_WORK(&mci->chrdet_work, &mt6360_chrdet_work); > > //snip > > > + > > +static int mt6360_charger_remove(struct platform_device *pdev) > > +{ > > + struct mt6360_chg_info *mci = platform_get_drvdata(pdev); > > + > > + cancel_work_sync(&mci->chrdet_work); > > + > > + return 0; > > +} > > Just as a note, devm_work_autocancel() should hopefully be included at > next cycle. Then you might be able to drop the .remove(). > ACK, I will replace it, thanks. > FWIW: > Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > > Best Regards > Matti Vaittinen > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v5 3/3] power: supply: mt6360_charger: add MT6360 charger support 2021-05-31 3:39 ` Gene Chen @ 2021-07-16 13:48 ` Sebastian Reichel 0 siblings, 0 replies; 9+ messages in thread From: Sebastian Reichel @ 2021-07-16 13:48 UTC (permalink / raw) To: Gene Chen Cc: Vaittinen, Matti, Matthias Brugger, Mark Brown, Rob Herring, devicetree, inux-pm, linux-arm Mailing List, moderated list:ARM/Mediatek SoC support, Linux Kernel Mailing List, Randy Dunlap, Gene Chen, Wilma.Wu, shufan_lee, ChiYuan Huang, benjamin.chao [-- Attachment #1: Type: text/plain, Size: 634 bytes --] Hi, On Mon, May 31, 2021 at 11:39:50AM +0800, Gene Chen wrote: > > > +static int mt6360_charger_remove(struct platform_device *pdev) > > > +{ > > > + struct mt6360_chg_info *mci = platform_get_drvdata(pdev); > > > + > > > + cancel_work_sync(&mci->chrdet_work); > > > + > > > + return 0; > > > +} > > > > Just as a note, devm_work_autocancel() should hopefully be included at > > next cycle. Then you might be able to drop the .remove(). > > ACK, I will replace it, thanks. > > FWIW: > > Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Did I miss a newer revision? -- Sebastian [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v5 3/3] power: supply: mt6360_charger: add MT6360 charger support 2021-05-28 8:13 ` [PATCH v5 3/3] power: supply: mt6360_charger: add MT6360 charger support Gene Chen 2021-05-28 9:47 ` Matti Vaittinen @ 2021-05-28 16:22 ` Randy Dunlap 1 sibling, 0 replies; 9+ messages in thread From: Randy Dunlap @ 2021-05-28 16:22 UTC (permalink / raw) To: Gene Chen, sre, matthias.bgg, matti.vaittinen Cc: broonie, robh+dt, devicetree, inux-pm, linux-arm-kernel, linux-mediatek, linux-kernel, gene_chen, Wilma.Wu, shufan_lee, cy_huang, benjamin.chao On 5/28/21 1:13 AM, Gene Chen wrote: > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > index e696364126f1..3257b1ad5e36 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -577,6 +577,17 @@ config CHARGER_MP2629 > Battery charger. This driver provides Battery charger power management > functions on the systems. > > +config CHARGER_MT6360 > + tristate "Mediatek MT6360 Charger Driver" > + depends on MFD_MT6360 > + depends on REGULATOR > + select LINEAR_RANGES > + help > + Say Y here to enable MT6360 Charger Part. > + The device supports High-Accuracy Voltage/Current Regulation, > + Average Input Current Regulation, Battery Tempature Sensing, Temperature > + Over-Temperature Protection, DPDM Detection for BC1.2 BC1.2. thanks. -- ~Randy ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-07-16 13:48 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-05-28 8:12 [PATCH v5 0/3] power: supply: mt6360_charger: add MT6360 charger support Gene Chen 2021-05-28 8:12 ` [PATCH v5 1/3] lib: add linear range get selector within Gene Chen 2021-05-28 9:02 ` Vaittinen, Matti 2021-05-28 8:12 ` [PATCH v5 2/3] dt-bindings: power: Add bindings document for Charger support on MT6360 PMIC Gene Chen 2021-05-28 8:13 ` [PATCH v5 3/3] power: supply: mt6360_charger: add MT6360 charger support Gene Chen 2021-05-28 9:47 ` Matti Vaittinen 2021-05-31 3:39 ` Gene Chen 2021-07-16 13:48 ` Sebastian Reichel 2021-05-28 16:22 ` Randy Dunlap
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).