* [PATCH 5.4 01/84] floppy: disable FDRAWCMD by default
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 02/84] hamradio: defer 6pack kfree after unregister_netdev Greg Kroah-Hartman
` (86 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Minh Yuan,
syzbot+8e8958586909d62b6840, cruise k, Kyungtae Kim,
Linus Torvalds, Denis Efremov, Willy Tarreau, Linus Torvalds
From: Willy Tarreau <w@1wt.eu>
commit 233087ca063686964a53c829d547c7571e3f67bf upstream.
Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.
[ It turns out this has been around, and that others have reported the
KASAN splats over the years, but Minh Yuan had a reproducer for it and
so gets primary credit for reporting it for this fix - Linus ]
The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats. The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.
Let's just add a config option to completely disable this ioctl and
leave it disabled by default. Distros shouldn't use it, and only those
running on antique hardware might need to enable it.
Link: https://lore.kernel.org/all/000000000000b71cdd05d703f6bf@google.com/
Link: https://lore.kernel.org/lkml/CAKcFiNC=MfYVW-Jt9A3=FPJpTwCD2PL_ULNCpsCVE5s8ZeBQgQ@mail.gmail.com
Link: https://lore.kernel.org/all/CAEAjamu1FRhz6StCe_55XY5s389ZP_xmCF69k987En+1z53=eg@mail.gmail.com
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Reported-by: syzbot+8e8958586909d62b6840@syzkaller.appspotmail.com
Reported-by: cruise k <cruise4k@gmail.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/Kconfig | 16 ++++++++++++++++
drivers/block/floppy.c | 43 ++++++++++++++++++++++++++++++++-----------
2 files changed, 48 insertions(+), 11 deletions(-)
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -39,6 +39,22 @@ config BLK_DEV_FD
To compile this driver as a module, choose M here: the
module will be called floppy.
+config BLK_DEV_FD_RAWCMD
+ bool "Support for raw floppy disk commands (DEPRECATED)"
+ depends on BLK_DEV_FD
+ help
+ If you want to use actual physical floppies and expect to do
+ special low-level hardware accesses to them (access and use
+ non-standard formats, for example), then enable this.
+
+ Note that the code enabled by this option is rarely used and
+ might be unstable or insecure, and distros should not enable it.
+
+ Note: FDRAWCMD is deprecated and will be removed from the kernel
+ in the near future.
+
+ If unsure, say N.
+
config AMIGA_FLOPPY
tristate "Amiga floppy support"
depends on AMIGA
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3012,6 +3012,8 @@ static const char *drive_name(int type,
return "(null)";
}
+#ifdef CONFIG_BLK_DEV_FD_RAWCMD
+
/* raw commands */
static void raw_cmd_done(int flag)
{
@@ -3223,6 +3225,35 @@ static int raw_cmd_ioctl(int cmd, void _
return ret;
}
+static int floppy_raw_cmd_ioctl(int type, int drive, int cmd,
+ void __user *param)
+{
+ int ret;
+
+ pr_warn_once("Note: FDRAWCMD is deprecated and will be removed from the kernel in the near future.\n");
+
+ if (type)
+ return -EINVAL;
+ if (lock_fdc(drive))
+ return -EINTR;
+ set_floppy(drive);
+ ret = raw_cmd_ioctl(cmd, param);
+ if (ret == -EINTR)
+ return -EINTR;
+ process_fd_request();
+ return ret;
+}
+
+#else /* CONFIG_BLK_DEV_FD_RAWCMD */
+
+static int floppy_raw_cmd_ioctl(int type, int drive, int cmd,
+ void __user *param)
+{
+ return -EOPNOTSUPP;
+}
+
+#endif
+
static int invalidate_drive(struct block_device *bdev)
{
/* invalidate the buffer track to force a reread */
@@ -3410,7 +3441,6 @@ static int fd_locked_ioctl(struct block_
{
int drive = (long)bdev->bd_disk->private_data;
int type = ITYPE(UDRS->fd_device);
- int i;
int ret;
int size;
union inparam {
@@ -3561,16 +3591,7 @@ static int fd_locked_ioctl(struct block_
outparam = UDRWE;
break;
case FDRAWCMD:
- if (type)
- return -EINVAL;
- if (lock_fdc(drive))
- return -EINTR;
- set_floppy(drive);
- i = raw_cmd_ioctl(cmd, (void __user *)param);
- if (i == -EINTR)
- return -EINTR;
- process_fd_request();
- return i;
+ return floppy_raw_cmd_ioctl(type, drive, cmd, (void __user *)param);
case FDTWADDLE:
if (lock_fdc(drive))
return -EINTR;
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 02/84] hamradio: defer 6pack kfree after unregister_netdev
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 01/84] floppy: disable FDRAWCMD by default Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 03/84] hamradio: remove needs_free_netdev to avoid UAF Greg Kroah-Hartman
` (85 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lin Ma, David S. Miller, Ovidiu Panait
From: Lin Ma <linma@zju.edu.cn>
commit 0b9111922b1f399aba6ed1e1b8f2079c3da1aed8 upstream.
There is a possible race condition (use-after-free) like below
(USE) | (FREE)
dev_queue_xmit |
__dev_queue_xmit |
__dev_xmit_skb |
sch_direct_xmit | ...
xmit_one |
netdev_start_xmit | tty_ldisc_kill
__netdev_start_xmit | 6pack_close
sp_xmit | kfree
sp_encaps |
|
According to the patch "defer ax25 kfree after unregister_netdev", this
patch reorder the kfree after the unregister_netdev to avoid the possible
UAF as the unregister_netdev() is well synchronized and won't return if
there is a running routine.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/hamradio/6pack.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -679,9 +679,11 @@ static void sixpack_close(struct tty_str
del_timer_sync(&sp->tx_t);
del_timer_sync(&sp->resync_t);
- /* Free all 6pack frame buffers. */
+ /* Free all 6pack frame buffers after unreg. */
kfree(sp->rbuff);
kfree(sp->xbuff);
+
+ free_netdev(sp->dev);
}
/* Perform I/O control on an active 6pack channel. */
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 03/84] hamradio: remove needs_free_netdev to avoid UAF
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 01/84] floppy: disable FDRAWCMD by default Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 02/84] hamradio: defer 6pack kfree after unregister_netdev Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 04/84] lightnvm: disable the subsystem Greg Kroah-Hartman
` (84 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lin Ma, Jakub Kicinski, Ovidiu Panait
From: Lin Ma <linma@zju.edu.cn>
commit 81b1d548d00bcd028303c4f3150fa753b9b8aa71 upstream.
The former patch "defer 6pack kfree after unregister_netdev" reorders
the kfree of two buffer after the unregister_netdev to prevent the race
condition. It also adds free_netdev() function in sixpack_close(), which
is a direct copy from the similar code in mkiss_close().
However, in sixpack driver, the flag needs_free_netdev is set to true in
sp_setup(), hence the unregister_netdev() will free the netdev
automatically. Therefore, as the sp is netdev_priv, use-after-free
occurs.
This patch removes the needs_free_netdev = true and just let the
free_netdev to finish this deallocation task.
Fixes: 0b9111922b1f ("hamradio: defer 6pack kfree after unregister_netdev")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20211111141402.7551-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/hamradio/6pack.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -311,7 +311,6 @@ static void sp_setup(struct net_device *
{
/* Finish setting up the DEVICE info. */
dev->netdev_ops = &sp_netdev_ops;
- dev->needs_free_netdev = true;
dev->mtu = SIXP_MTU;
dev->hard_header_len = AX25_MAX_HEADER_LEN;
dev->header_ops = &ax25_header_ops;
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 04/84] lightnvm: disable the subsystem
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 03/84] hamradio: remove needs_free_netdev to avoid UAF Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 05/84] usb: mtu3: fix USB 3.0 dual-role-switch from device to host Greg Kroah-Hartman
` (83 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christoph Hellwig,
Matias Bjørling, Javier González, Jens Axboe
In commit 9ea9b9c48387 ("remove the lightnvm subsystem") the lightnvm
subsystem was removed as there is no hardware in the wild for it, and
the code is known to have problems. This should also be disabled for
older LTS kernels as well to prevent anyone from accidentally using it.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matias Bjørling <mb@lightnvm.io>
Cc: Javier González <javier@javigon.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/lightnvm/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/lightnvm/Kconfig
+++ b/drivers/lightnvm/Kconfig
@@ -5,7 +5,7 @@
menuconfig NVM
bool "Open-Channel SSD target support"
- depends on BLOCK
+ depends on BLOCK && BROKEN
help
Say Y here to get to enable Open-channel SSDs.
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 05/84] usb: mtu3: fix USB 3.0 dual-role-switch from device to host
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 04/84] lightnvm: disable the subsystem Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 06/84] USB: quirks: add a Realtek card reader Greg Kroah-Hartman
` (82 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fabien Parent, Chunfeng Yun,
Macpaul Lin, Tainping Fang
From: Macpaul Lin <macpaul.lin@mediatek.com>
commit 456244aeecd54249096362a173dfe06b82a5cafa upstream.
Issue description:
When an OTG port has been switched to device role and then switch back
to host role again, the USB 3.0 Host (XHCI) will not be able to detect
"plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed)
devices until system reboot.
Root cause and Solution:
There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in
toggle_opstate(). At the end of role switch procedure, toggle_opstate()
will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was
set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN
will be skipped hence caused the port cannot detect connected USB 2.0
(Highspeed and Fullspeed) devices. Simply remove the condition check to
solve this issue.
Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support")
Cc: stable@vger.kernel.org
Tested-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Tainping Fang <tianping.fang@mediatek.com>
Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/mtu3/mtu3_dr.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -41,10 +41,8 @@ static char *mailbox_state_string(enum m
static void toggle_opstate(struct ssusb_mtk *ssusb)
{
- if (!ssusb->otg_switch.is_u3_drd) {
- mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
- mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
- }
+ mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
+ mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
}
/* only port0 supports dual-role mode */
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 06/84] USB: quirks: add a Realtek card reader
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 05/84] usb: mtu3: fix USB 3.0 dual-role-switch from device to host Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 07/84] USB: quirks: add STRING quirk for VCOM device Greg Kroah-Hartman
` (81 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Oliver Neukum
From: Oliver Neukum <oneukum@suse.com>
commit 2a7ccf6bb6f147f64c025ad68f4255d8e1e0ce6d upstream.
This device is reported to stall when enummerated.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -404,6 +404,9 @@ static const struct usb_device_id usb_qu
{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+ /* Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)*/
+ { USB_DEVICE(0x0bda, 0x0151), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Realtek hub in Dell WD19 (Type-C) */
{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
{ USB_DEVICE(0x0bda, 0x5487), .driver_info = USB_QUIRK_RESET_RESUME },
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 07/84] USB: quirks: add STRING quirk for VCOM device
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 06/84] USB: quirks: add a Realtek card reader Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 08/84] USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS Greg Kroah-Hartman
` (80 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Oliver Neukum
From: Oliver Neukum <oneukum@suse.com>
commit ec547af8a9ea6441864bad34172676b5652ceb96 upstream.
This has been reported to stall if queried
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -511,6 +511,9 @@ static const struct usb_device_id usb_qu
/* DJI CineSSD */
{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
+ /* VCOM device */
+ { USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 08/84] USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 07/84] USB: quirks: add STRING quirk for VCOM device Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 09/84] USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader Greg Kroah-Hartman
` (79 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kernel test robot, Kees Cook, Johan Hovold
From: Kees Cook <keescook@chromium.org>
commit e23e50e7acc8d8f16498e9c129db33e6a00e80eb upstream.
The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n
due to "-mabi=apcs-gnu", even though it has a single u8:
whiteheat_private {
__u8 mcr; /* 0 1 */
/* size: 4, cachelines: 1, members: 1 */
/* padding: 3 */
/* last cacheline: 4 bytes */
};
The result is technically harmless, as both the source and the
destinations are currently the same allocation size (4 bytes) and don't
use their padding, but if anything were to ever be added after the
"mcr" member in "struct whiteheat_private", it would be overwritten. The
structs both have a single u8 "mcr" member, but are 4 bytes in padded
size. The memcpy() destination was explicitly targeting the u8 member
(size 1) with the length of the whole structure (size 4), triggering
the memcpy buffer overflow warning:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:11,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/lockdep.h:14,
from include/linux/spinlock.h:62,
from include/linux/mmzone.h:8,
from include/linux/gfp.h:6,
from include/linux/slab.h:15,
from drivers/usb/serial/whiteheat.c:17:
In function 'fortify_memcpy_chk',
inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4:
include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
328 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Instead, just assign the one byte directly.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202204142318.vDqjjSFn-lkp@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220421001234.2421107-1-keescook@chromium.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/whiteheat.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -599,9 +599,8 @@ static int firm_send_command(struct usb_
switch (command) {
case WHITEHEAT_GET_DTR_RTS:
info = usb_get_serial_port_data(port);
- memcpy(&info->mcr, command_info->result_buffer,
- sizeof(struct whiteheat_dr_info));
- break;
+ info->mcr = command_info->result_buffer[0];
+ break;
}
}
exit:
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 09/84] USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 08/84] USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 10/84] USB: serial: option: add support for Cinterion MV32-WA/MV32-WB Greg Kroah-Hartman
` (78 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Bruno Thomsen, Johan Hovold
From: Bruno Thomsen <bruno.thomsen@gmail.com>
commit 35a923a0b329c343e9e81d79518e2937eba06fcd upstream.
Wireless reading of water and heat meters using 868 MHz wM-Bus mode C1.
The two different product IDs allow detection of dongle antenna
solution:
- Internal antenna
- External antenna using SMA connector
https://www.kamstrup.com/en-en/water-solutions/water-meter-reading/usb-meter-reader
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20220414081202.5591-1-bruno.thomsen@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/cp210x.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -195,6 +195,8 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
+ { USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */
+ { USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 10/84] USB: serial: option: add support for Cinterion MV32-WA/MV32-WB
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 09/84] USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 11/84] USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions Greg Kroah-Hartman
` (77 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Slark Xiao, Johan Hovold
From: Slark Xiao <slark_xiao@163.com>
commit b4a64ed6e7b857317070fcb9d87ff5d4a73be3e8 upstream.
Add support for Cinterion device MV32-WA/MV32-WB. MV32-WA PID is
0x00F1, and MV32-WB PID is 0x00F2.
Test evidence as below:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=1e2d ProdID=00f1 Rev=05.04
S: Manufacturer=Cinterion
S: Product=Cinterion PID 0x00F1 USB Mobile Broadband
S: SerialNumber=78ada8c4
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=1e2d ProdID=00f2 Rev=05.04
S: Manufacturer=Cinterion
S: Product=Cinterion PID 0x00F2 USB Mobile Broadband
S: SerialNumber=cdd06a78
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Interface 0&1: MBIM, 2:Modem, 3: GNSS, 4: NMEA, 5: Diag
GNSS port don't use serial driver.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220414074434.5699-1-slark_xiao@163.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -432,6 +432,8 @@ static void option_instat_callback(struc
#define CINTERION_PRODUCT_CLS8 0x00b0
#define CINTERION_PRODUCT_MV31_MBIM 0x00b3
#define CINTERION_PRODUCT_MV31_RMNET 0x00b7
+#define CINTERION_PRODUCT_MV32_WA 0x00f1
+#define CINTERION_PRODUCT_MV32_WB 0x00f2
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -1969,6 +1971,10 @@ static const struct usb_device_id option
.driver_info = RSVD(3)},
{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff),
.driver_info = RSVD(0)},
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff),
+ .driver_info = RSVD(3)},
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff),
+ .driver_info = RSVD(3)},
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
.driver_info = RSVD(4) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 11/84] USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 10/84] USB: serial: option: add support for Cinterion MV32-WA/MV32-WB Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 12/84] xhci: stop polling roothubs after shutdown Greg Kroah-Hartman
` (76 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniele Palmas, Johan Hovold
From: Daniele Palmas <dnlplm@gmail.com>
commit f32c5a0423400e01f4d7c607949fa3a1f006e8fa upstream.
Add support for the following Telit FN980 and FN990 compositions:
0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty
0x1058: tty, adb, tty, tty, tty, tty, tty
0x1075: adb, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20220406141408.580669-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1219,6 +1219,10 @@ static const struct usb_device_id option
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff), /* Telit FD980 */
.driver_info = NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1057, 0xff), /* Telit FN980 */
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1058, 0xff), /* Telit FN980 (PCIe) */
+ .driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff), /* Telit LN920 (rmnet) */
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff), /* Telit LN920 (MBIM) */
@@ -1235,6 +1239,8 @@ static const struct usb_device_id option
.driver_info = NCTRL(2) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990 (ECM) */
.driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990 (PCIe) */
+ .driver_info = RSVD(0) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 12/84] xhci: stop polling roothubs after shutdown
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 11/84] USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 13/84] xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500ms Greg Kroah-Hartman
` (75 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Henry Lin, Mathias Nyman
From: Henry Lin <henryl@nvidia.com>
commit dc92944a014cd6a6f6c94299aaa36164dd2c238a upstream.
While rebooting, XHCI controller and its bus device will be shut down
in order by .shutdown callback. Stopping roothubs polling in
xhci_shutdown() can prevent XHCI driver from accessing port status
after its bus device shutdown.
Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs
polling, XHCI driver may access PCIe BAR register for port status after
parent PCIe root port driver is shutdown and cause PCIe bus error.
[check shared hcd exist before stopping its roothub polling -Mathias]
Cc: stable@vger.kernel.org
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -779,6 +779,17 @@ void xhci_shutdown(struct usb_hcd *hcd)
if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
+ /* Don't poll the roothubs after shutdown. */
+ xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
+ __func__, hcd->self.busnum);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
+
+ if (xhci->shared_hcd) {
+ clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+ del_timer_sync(&xhci->shared_hcd->rh_timer);
+ }
+
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
/* Workaround for spurious wakeups at shutdown with HSW */
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 13/84] xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500ms
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 12/84] xhci: stop polling roothubs after shutdown Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 14/84] iio: dac: ad5592r: Fix the missing return value Greg Kroah-Hartman
` (74 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathias Nyman
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit 33597f0c48be0836854d43c577e35c8f8a765a7d upstream.
The first U3 wake signal by the host may be lost if the USB 3 connection is
tunneled over USB4, with a runtime suspended USB4 host, and firmware
implemented connection manager.
Specs state the host must wait 100ms (tU3WakeupRetryDelay) before
resending a U3 wake signal if device doesn't respond, leading to U3 -> U0
link transition times around 270ms in the tunneled case.
Fixes: 0200b9f790b0 ("xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-hub.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1343,7 +1343,7 @@ int xhci_hub_control(struct usb_hcd *hcd
}
spin_unlock_irqrestore(&xhci->lock, flags);
if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
- msecs_to_jiffies(100)))
+ msecs_to_jiffies(500)))
xhci_dbg(xhci, "missing U0 port change event for port %d\n",
wIndex);
spin_lock_irqsave(&xhci->lock, flags);
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 14/84] iio: dac: ad5592r: Fix the missing return value.
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 13/84] xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500ms Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 15/84] iio: dac: ad5446: Fix read_raw not returning set value Greg Kroah-Hartman
` (73 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zizhuang Deng, Stable, Jonathan Cameron
From: Zizhuang Deng <sunsetdzz@gmail.com>
commit b55b38f7cc12da3b9ef36e7a3b7f8f96737df4d5 upstream.
The third call to `fwnode_property_read_u32` did not record
the return value, resulting in `channel_offstate` possibly
being assigned the wrong value.
Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs")
Signed-off-by: Zizhuang Deng <sunsetdzz@gmail.com>
Link: https://lore.kernel.org/r/20220310125450.4164164-1-sunsetdzz@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/dac/ad5592r-base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/dac/ad5592r-base.c
+++ b/drivers/iio/dac/ad5592r-base.c
@@ -530,7 +530,7 @@ static int ad5592r_alloc_channels(struct
if (!ret)
st->channel_modes[reg] = tmp;
- fwnode_property_read_u32(child, "adi,off-state", &tmp);
+ ret = fwnode_property_read_u32(child, "adi,off-state", &tmp);
if (!ret)
st->channel_offstate[reg] = tmp;
}
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 15/84] iio: dac: ad5446: Fix read_raw not returning set value
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 14/84] iio: dac: ad5592r: Fix the missing return value Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 16/84] iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on() Greg Kroah-Hartman
` (72 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Hennerich, Nuno Sá,
Stable, Jonathan Cameron
From: Michael Hennerich <michael.hennerich@analog.com>
commit 89a01cd688d3c0ac983ef0b0e5f40018ab768317 upstream.
read_raw should return the un-scaled value.
Fixes: 5e06bdfb46e8b ("staging:iio:dac:ad5446: Return cached value for 'raw' attribute")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220406105620.1171340-1-michael.hennerich@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/dac/ad5446.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/dac/ad5446.c
+++ b/drivers/iio/dac/ad5446.c
@@ -170,7 +170,7 @@ static int ad5446_read_raw(struct iio_de
switch (m) {
case IIO_CHAN_INFO_RAW:
- *val = st->cached_val;
+ *val = st->cached_val >> chan->scan_type.shift;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = st->vref_mv;
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 16/84] iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 15/84] iio: dac: ad5446: Fix read_raw not returning set value Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 17/84] usb: misc: fix improper handling of refcount in uss720_probe() Greg Kroah-Hartman
` (71 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zheyu Ma, Stable, Jonathan Cameron
From: Zheyu Ma <zheyuma97@gmail.com>
commit 3a26787dacf04257a68b16315c984eb2c340bc5e upstream.
When the driver fails to enable the regulator 'vid', we will get the
following splat:
[ 79.955610] WARNING: CPU: 5 PID: 441 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[ 79.959641] RIP: 0010:_regulator_put+0x3ec/0x4e0
[ 79.967570] Call Trace:
[ 79.967773] <TASK>
[ 79.967951] regulator_put+0x1f/0x30
[ 79.968254] devres_release_group+0x319/0x3d0
[ 79.968608] i2c_device_probe+0x766/0x940
Fix this by disabling the 'vdd' regulator when failing to enable 'vid'
regulator.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220409034849.3717231-2-zheyuma97@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/magnetometer/ak8975.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -391,6 +391,7 @@ static int ak8975_power_on(const struct
if (ret) {
dev_warn(&data->client->dev,
"Failed to enable specified Vid supply\n");
+ regulator_disable(data->vdd);
return ret;
}
/*
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 17/84] usb: misc: fix improper handling of refcount in uss720_probe()
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 16/84] iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on() Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:43 ` [PATCH 5.4 18/84] usb: typec: ucsi: Fix role swapping Greg Kroah-Hartman
` (70 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, stable, Dongliang Mu, Hangyu Hua
From: Hangyu Hua <hbh25y@gmail.com>
commit 0a96fa640dc928da9eaa46a22c46521b037b78ad upstream.
usb_put_dev shouldn't be called when uss720_probe succeeds because of
priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL
before destroy_priv in uss720_disconnect because usb_put_dev is in
destroy_priv.
Fix this by moving priv->usbdev = NULL after usb_put_dev.
Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe")
Cc: stable <stable@kernel.org>
Reviewed-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220407024001.11761-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/uss720.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -71,6 +71,7 @@ static void destroy_priv(struct kref *kr
dev_dbg(&priv->usbdev->dev, "destroying priv datastructure\n");
usb_put_dev(priv->usbdev);
+ priv->usbdev = NULL;
kfree(priv);
}
@@ -736,7 +737,6 @@ static int uss720_probe(struct usb_inter
parport_announce_port(pp);
usb_set_intfdata(intf, pp);
- usb_put_dev(usbdev);
return 0;
probe_abort:
@@ -754,7 +754,6 @@ static void uss720_disconnect(struct usb
usb_set_intfdata(intf, NULL);
if (pp) {
priv = pp->private_data;
- priv->usbdev = NULL;
priv->pp = NULL;
dev_dbg(&intf->dev, "parport_remove_port\n");
parport_remove_port(pp);
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 18/84] usb: typec: ucsi: Fix role swapping
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 17/84] usb: misc: fix improper handling of refcount in uss720_probe() Greg Kroah-Hartman
@ 2022-05-04 16:43 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 19/84] usb: gadget: uvc: Fix crash when encoding data for usb request Greg Kroah-Hartman
` (69 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:43 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Heikki Krogerus, Jia-Ju Bai
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
commit eb5d7ff3cf0d55093c619b5ad107cd5c05ce8134 upstream.
All attempts to swap the roles timed out because the
completion was done without releasing the port lock. Fixing
that by releasing the lock before starting to wait for the
completion.
Link: https://lore.kernel.org/linux-usb/037de7ac-e210-bdf5-ec7a-8c0c88a0be20@gmail.com/
Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220405134824.68067-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/typec/ucsi/ucsi.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -748,14 +748,18 @@ ucsi_dr_swap(const struct typec_capabili
if (ret < 0)
goto out_unlock;
+ mutex_unlock(&con->lock);
+
if (!wait_for_completion_timeout(&con->complete,
- msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
- ret = -ETIMEDOUT;
+ msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
+ return -ETIMEDOUT;
+
+ return 0;
out_unlock:
mutex_unlock(&con->lock);
- return ret < 0 ? ret : 0;
+ return ret;
}
static int
@@ -780,11 +784,13 @@ ucsi_pr_swap(const struct typec_capabili
if (ret < 0)
goto out_unlock;
+ mutex_unlock(&con->lock);
+
if (!wait_for_completion_timeout(&con->complete,
- msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) {
- ret = -ETIMEDOUT;
- goto out_unlock;
- }
+ msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
+ return -ETIMEDOUT;
+
+ mutex_lock(&con->lock);
/* Something has gone wrong while swapping the role */
if (con->status.pwr_op_mode != UCSI_CONSTAT_PWR_OPMODE_PD) {
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 19/84] usb: gadget: uvc: Fix crash when encoding data for usb request
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2022-05-04 16:43 ` [PATCH 5.4 18/84] usb: typec: ucsi: Fix role swapping Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 20/84] usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind() Greg Kroah-Hartman
` (68 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dan Vacura
From: Dan Vacura <w36195@motorola.com>
commit 71d471e3faf90c9674cadc7605ac719e82cb7fac upstream.
During the uvcg_video_pump() process, if an error occurs and
uvcg_queue_cancel() is called, the buffer queue will be cleared out, but
the current marker (queue->buf_used) of the active buffer (no longer
active) is not reset. On the next iteration of uvcg_video_pump() the
stale buf_used count will be used and the logic of min((unsigned
int)len, buf->bytesused - queue->buf_used) may incorrectly calculate a
nbytes size, causing an invalid memory access.
[80802.185460][ T315] configfs-gadget gadget: uvc: VS request completed
with status -18.
[80802.185519][ T315] configfs-gadget gadget: uvc: VS request completed
with status -18.
...
uvcg_queue_cancel() is called and the queue is cleared out, but the
marker queue->buf_used is not reset.
...
[80802.262328][ T8682] Unable to handle kernel paging request at virtual
address ffffffc03af9f000
...
...
[80802.263138][ T8682] Call trace:
[80802.263146][ T8682] __memcpy+0x12c/0x180
[80802.263155][ T8682] uvcg_video_pump+0xcc/0x1e0
[80802.263165][ T8682] process_one_work+0x2cc/0x568
[80802.263173][ T8682] worker_thread+0x28c/0x518
[80802.263181][ T8682] kthread+0x160/0x170
[80802.263188][ T8682] ret_from_fork+0x10/0x18
[80802.263198][ T8682] Code: a8c12829 a88130cb a8c130
Fixes: d692522577c0 ("usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220331184024.23918-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/function/uvc_queue.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/gadget/function/uvc_queue.c
+++ b/drivers/usb/gadget/function/uvc_queue.c
@@ -242,6 +242,8 @@ void uvcg_queue_cancel(struct uvc_video_
buf->state = UVC_BUF_STATE_ERROR;
vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR);
}
+ queue->buf_used = 0;
+
/* This must be protected by the irqlock spinlock to avoid race
* conditions between uvc_queue_buffer and the disconnection event that
* could result in an interruptible wait in uvc_dequeue_buffer. Do not
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 20/84] usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 19/84] usb: gadget: uvc: Fix crash when encoding data for usb request Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 21/84] usb: dwc3: core: Fix tx/rx threshold settings Greg Kroah-Hartman
` (67 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vijayavardhan Vennapusa, Dan Vacura, stable
From: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
commit bf95c4d4630c7a2c16e7b424fdea5177d9ce0864 upstream.
If any function like UVC is deactivating gadget as part of composition
switch which results in not calling pullup enablement, it is not getting
enabled after switch to new composition due to this deactivation flag
not cleared. This results in USB enumeration not happening after switch
to new USB composition. Hence clear deactivation flag inside gadget
structure in configfs_composite_unbind() before switch to new USB
composition.
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Signed-off-by: Dan Vacura <w36195@motorola.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220413211038.72797-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/configfs.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1412,6 +1412,8 @@ static void configfs_composite_unbind(st
usb_ep_autoconfig_reset(cdev->gadget);
spin_lock_irqsave(&gi->spinlock, flags);
cdev->gadget = NULL;
+ cdev->deactivations = 0;
+ gadget->deactivated = false;
set_gadget_data(gadget, NULL);
spin_unlock_irqrestore(&gi->spinlock, flags);
}
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 21/84] usb: dwc3: core: Fix tx/rx threshold settings
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 20/84] usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind() Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 22/84] usb: dwc3: gadget: Return proper request status Greg Kroah-Hartman
` (66 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Thinh Nguyen
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
commit f28ad9069363dec7deb88032b70612755eed9ee6 upstream.
The current driver logic checks against 0 to determine whether the
periodic tx/rx threshold settings are set, but we may get bogus values
from uninitialized variables if no device property is set. Properly
default these variables to 0.
Fixes: 938a5ad1d305 ("usb: dwc3: Check for ESS TX/RX threshold config")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/cccfce990b11b730b0dae42f9d217dc6fb988c90.1649727139.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1229,10 +1229,10 @@ static void dwc3_get_properties(struct d
u8 lpm_nyet_threshold;
u8 tx_de_emphasis;
u8 hird_threshold;
- u8 rx_thr_num_pkt_prd;
- u8 rx_max_burst_prd;
- u8 tx_thr_num_pkt_prd;
- u8 tx_max_burst_prd;
+ u8 rx_thr_num_pkt_prd = 0;
+ u8 rx_max_burst_prd = 0;
+ u8 tx_thr_num_pkt_prd = 0;
+ u8 tx_max_burst_prd = 0;
/* default to highest possible threshold */
lpm_nyet_threshold = 0xf;
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 22/84] usb: dwc3: gadget: Return proper request status
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 21/84] usb: dwc3: core: Fix tx/rx threshold settings Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 23/84] serial: imx: fix overrun interrupts in DMA mode Greg Kroah-Hartman
` (65 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Thinh Nguyen
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
commit c7428dbddcf4ea1919e1c8e15f715b94ca359268 upstream.
If the user sets the usb_request's no_interrupt, then there will be no
completion event for the request. Currently the driver incorrectly uses
the event status of a different request to report the status for a
request with no_interrupt. The dwc3 driver needs to check the TRB status
associated with the request when reporting its status.
Note: this is only applicable to missed_isoc TRB completion status, but
the other status are also listed for completeness/documentation.
Fixes: 6d8a019614f3 ("usb: dwc3: gadget: check for Missed Isoc from event status")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/db2c80108286cfd108adb05bad52138b78d7c3a7.1650673655.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/gadget.c | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2728,6 +2728,7 @@ static int dwc3_gadget_ep_cleanup_comple
const struct dwc3_event_depevt *event,
struct dwc3_request *req, int status)
{
+ int request_status;
int ret;
if (req->request.num_mapped_sgs)
@@ -2757,7 +2758,35 @@ static int dwc3_gadget_ep_cleanup_comple
req->needs_extra_trb = false;
}
- dwc3_gadget_giveback(dep, req, status);
+ /*
+ * The event status only reflects the status of the TRB with IOC set.
+ * For the requests that don't set interrupt on completion, the driver
+ * needs to check and return the status of the completed TRBs associated
+ * with the request. Use the status of the last TRB of the request.
+ */
+ if (req->request.no_interrupt) {
+ struct dwc3_trb *trb;
+
+ trb = dwc3_ep_prev_trb(dep, dep->trb_dequeue);
+ switch (DWC3_TRB_SIZE_TRBSTS(trb->size)) {
+ case DWC3_TRBSTS_MISSED_ISOC:
+ /* Isoc endpoint only */
+ request_status = -EXDEV;
+ break;
+ case DWC3_TRB_STS_XFER_IN_PROG:
+ /* Applicable when End Transfer with ForceRM=0 */
+ case DWC3_TRBSTS_SETUP_PENDING:
+ /* Control endpoint only */
+ case DWC3_TRBSTS_OK:
+ default:
+ request_status = 0;
+ break;
+ }
+ } else {
+ request_status = status;
+ }
+
+ dwc3_gadget_giveback(dep, req, request_status);
out:
return ret;
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 23/84] serial: imx: fix overrun interrupts in DMA mode
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 22/84] usb: dwc3: gadget: Return proper request status Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 24/84] serial: 8250: Also set sticky MCR bits in console restoration Greg Kroah-Hartman
` (64 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Uwe Kleine-König, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 3ee82c6e41f3d2212647ce0bc5a05a0f69097824 upstream.
Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is
off") accidentally enabled overrun interrupts unconditionally when
deferring DMA enable until after the receiver has been enabled during
startup.
Fix this by using the DMA-initialised instead of DMA-enabled flag to
determine whether overrun interrupts should be enabled.
Note that overrun interrupts are already accounted for in
imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f
("serial: imx-serial - update RX error counters when DMA is used").
Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off")
Cc: stable@vger.kernel.org # 4.17
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220411081957.7846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/imx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1401,7 +1401,7 @@ static int imx_uart_startup(struct uart_
imx_uart_writel(sport, ucr1, UCR1);
ucr4 = imx_uart_readl(sport, UCR4) & ~UCR4_OREN;
- if (!sport->dma_is_enabled)
+ if (!dma_is_inited)
ucr4 |= UCR4_OREN;
imx_uart_writel(sport, ucr4, UCR4);
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 24/84] serial: 8250: Also set sticky MCR bits in console restoration
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 23/84] serial: imx: fix overrun interrupts in DMA mode Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 25/84] serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device Greg Kroah-Hartman
` (63 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maciej W. Rozycki, Andy Shevchenko
From: Maciej W. Rozycki <macro@orcam.me.uk>
commit 6e6eebdf5e2455f089ccd000754a0deaeb79af82 upstream.
Sticky MCR bits are lost in console restoration if console suspending
has been disabled. This currently affects the AFE bit, which works in
combination with RTS which we set, so we want to make sure the UART
retains control of its FIFO where previously requested. Also specific
drivers may need other bits in the future.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 4516d50aabed ("serial: 8250: Use canary to restart console after suspend")
Cc: stable@vger.kernel.org # v4.0+
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181518490.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250/8250_port.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -3184,7 +3184,7 @@ static void serial8250_console_restore(s
serial8250_set_divisor(port, baud, quot, frac);
serial_port_out(port, UART_LCR, up->lcr);
- serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
+ serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
}
/*
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 25/84] serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 24/84] serial: 8250: Also set sticky MCR bits in console restoration Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 26/84] arch_topology: Do not set llc_sibling if llc_id is invalid Greg Kroah-Hartman
` (62 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maciej W. Rozycki, stable, Andy Shevchenko
From: Maciej W. Rozycki <macro@orcam.me.uk>
commit 637674fa40059cddcc3ad2212728965072f62ea3 upstream.
The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock
input derived from the 100MHz PCI Express clock. The clock rate is
divided by the oversampling rate of 16 as it is supplied to the baud
rate generator, yielding the baud base of 3906250.
Replace the incorrect baud base of 4000000 with the right value of
3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct
the clock for OxSemi PCIe devices").
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable <stable@kernel.org>
Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250/8250_pci.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2907,7 +2907,7 @@ enum pci_board_num_t {
pbn_panacom2,
pbn_panacom4,
pbn_plx_romulus,
- pbn_endrun_2_4000000,
+ pbn_endrun_2_3906250,
pbn_oxsemi,
pbn_oxsemi_1_4000000,
pbn_oxsemi_2_4000000,
@@ -3434,10 +3434,10 @@ static struct pciserial_board pci_boards
* signal now many ports are available
* 2 port 952 Uart support
*/
- [pbn_endrun_2_4000000] = {
+ [pbn_endrun_2_3906250] = {
.flags = FL_BASE0,
.num_ports = 2,
- .base_baud = 4000000,
+ .base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
@@ -4345,7 +4345,7 @@ static const struct pci_device_id serial
*/
{ PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_endrun_2_4000000 },
+ pbn_endrun_2_3906250 },
/*
* Quatech cards. These actually have configurable clocks but for
* now we just use the default.
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 26/84] arch_topology: Do not set llc_sibling if llc_id is invalid
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 25/84] serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 27/84] hex2bin: make the function hex_to_bin constant-time Greg Kroah-Hartman
` (61 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sudeep Holla, Wang Qing
From: Wang Qing <wangqing@vivo.com>
commit 1dc9f1a66e1718479e1c4f95514e1750602a3cb9 upstream.
When ACPI is not enabled, cpuid_topo->llc_id = cpu_topo->llc_id = -1, which
will set llc_sibling 0xff(...), this is misleading.
Don't set llc_sibling(default 0) if we don't know the cache topology.
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Wang Qing <wangqing@vivo.com>
Fixes: 37c3ec2d810f ("arm64: topology: divorce MC scheduling domain from core_siblings")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1649644580-54626-1-git-send-email-wangqing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/base/arch_topology.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -457,7 +457,7 @@ void update_siblings_masks(unsigned int
for_each_online_cpu(cpu) {
cpu_topo = &cpu_topology[cpu];
- if (cpuid_topo->llc_id == cpu_topo->llc_id) {
+ if (cpu_topo->llc_id != -1 && cpuid_topo->llc_id == cpu_topo->llc_id) {
cpumask_set_cpu(cpu, &cpuid_topo->llc_sibling);
cpumask_set_cpu(cpuid, &cpu_topo->llc_sibling);
}
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 27/84] hex2bin: make the function hex_to_bin constant-time
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 26/84] arch_topology: Do not set llc_sibling if llc_id is invalid Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 28/84] hex2bin: fix access beyond string end Greg Kroah-Hartman
` (60 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mikulas Patocka, Linus Torvalds
From: Mikulas Patocka <mpatocka@redhat.com>
commit e5be15767e7e284351853cbaba80cde8620341fb upstream.
The function hex2bin is used to load cryptographic keys into device
mapper targets dm-crypt and dm-integrity. It should take constant time
independent on the processed data, so that concurrently running
unprivileged code can't infer any information about the keys via
microarchitectural convert channels.
This patch changes the function hex_to_bin so that it contains no
branches and no memory accesses.
Note that this shouldn't cause performance degradation because the size
of the new function is the same as the size of the old function (on
x86-64) - and the new function causes no branch misprediction penalties.
I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64
i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32
sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64
powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are
no branches in the generated code.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/kernel.h | 2 +-
lib/hexdump.c | 32 +++++++++++++++++++++++++-------
2 files changed, 26 insertions(+), 8 deletions(-)
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -627,7 +627,7 @@ static inline char *hex_byte_pack_upper(
return buf;
}
-extern int hex_to_bin(char ch);
+extern int hex_to_bin(unsigned char ch);
extern int __must_check hex2bin(u8 *dst, const char *src, size_t count);
extern char *bin2hex(char *dst, const void *src, size_t count);
--- a/lib/hexdump.c
+++ b/lib/hexdump.c
@@ -21,15 +21,33 @@ EXPORT_SYMBOL(hex_asc_upper);
*
* hex_to_bin() converts one hex digit to its actual value or -1 in case of bad
* input.
+ *
+ * This function is used to load cryptographic keys, so it is coded in such a
+ * way that there are no conditions or memory accesses that depend on data.
+ *
+ * Explanation of the logic:
+ * (ch - '9' - 1) is negative if ch <= '9'
+ * ('0' - 1 - ch) is negative if ch >= '0'
+ * we "and" these two values, so the result is negative if ch is in the range
+ * '0' ... '9'
+ * we are only interested in the sign, so we do a shift ">> 8"; note that right
+ * shift of a negative value is implementation-defined, so we cast the
+ * value to (unsigned) before the shift --- we have 0xffffff if ch is in
+ * the range '0' ... '9', 0 otherwise
+ * we "and" this value with (ch - '0' + 1) --- we have a value 1 ... 10 if ch is
+ * in the range '0' ... '9', 0 otherwise
+ * we add this value to -1 --- we have a value 0 ... 9 if ch is in the range '0'
+ * ... '9', -1 otherwise
+ * the next line is similar to the previous one, but we need to decode both
+ * uppercase and lowercase letters, so we use (ch & 0xdf), which converts
+ * lowercase to uppercase
*/
-int hex_to_bin(char ch)
+int hex_to_bin(unsigned char ch)
{
- if ((ch >= '0') && (ch <= '9'))
- return ch - '0';
- ch = tolower(ch);
- if ((ch >= 'a') && (ch <= 'f'))
- return ch - 'a' + 10;
- return -1;
+ unsigned char cu = ch & 0xdf;
+ return -1 +
+ ((ch - '0' + 1) & (unsigned)((ch - '9' - 1) & ('0' - 1 - ch)) >> 8) +
+ ((cu - 'A' + 11) & (unsigned)((cu - 'F' - 1) & ('A' - 1 - cu)) >> 8);
}
EXPORT_SYMBOL(hex_to_bin);
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 28/84] hex2bin: fix access beyond string end
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 27/84] hex2bin: make the function hex_to_bin constant-time Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 29/84] video: fbdev: udlfb: properly check endpoint type Greg Kroah-Hartman
` (59 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mikulas Patocka, Andy Shevchenko,
Linus Torvalds
From: Mikulas Patocka <mpatocka@redhat.com>
commit e4d8a29997731b3bb14059024b24df9f784288d0 upstream.
If we pass too short string to "hex2bin" (and the string size without
the terminating NUL character is even), "hex2bin" reads one byte after
the terminating NUL character. This patch fixes it.
Note that hex_to_bin returns -1 on error and hex2bin return -EINVAL on
error - so we can't just return the variable "hi" or "lo" on error.
This inconsistency may be fixed in the next merge window, but for the
purpose of fixing this bug, we just preserve the existing behavior and
return -1 and -EINVAL.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: b78049831ffe ("lib: add error checking to hex2bin")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
lib/hexdump.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/lib/hexdump.c
+++ b/lib/hexdump.c
@@ -62,10 +62,13 @@ EXPORT_SYMBOL(hex_to_bin);
int hex2bin(u8 *dst, const char *src, size_t count)
{
while (count--) {
- int hi = hex_to_bin(*src++);
- int lo = hex_to_bin(*src++);
+ int hi, lo;
- if ((hi < 0) || (lo < 0))
+ hi = hex_to_bin(*src++);
+ if (unlikely(hi < 0))
+ return -EINVAL;
+ lo = hex_to_bin(*src++);
+ if (unlikely(lo < 0))
return -EINVAL;
*dst++ = (hi << 4) | lo;
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 29/84] video: fbdev: udlfb: properly check endpoint type
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 28/84] hex2bin: fix access beyond string end Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 30/84] arm64: dts: meson: remove CPU opps below 1GHz for G12B boards Greg Kroah-Hartman
` (58 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Skripkin, Helge Deller,
Sasha Levin, syzbot+53ce4a4246d0fe0fee34
From: Pavel Skripkin <paskripkin@gmail.com>
[ Upstream commit aaf7dbe07385e0b8deb7237eca2a79926bbc7091 ]
syzbot reported warning in usb_submit_urb, which is caused by wrong
endpoint type.
This driver uses out bulk endpoint for communication, so
let's check if this endpoint is present and bail out early if not.
Fail log:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 4822 at drivers/usb/core/urb.c:493 usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
Modules linked in:
CPU: 0 PID: 4822 Comm: kworker/0:3 Tainted: G W 5.13.0-syzkaller #0
...
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493
...
Call Trace:
dlfb_submit_urb+0x89/0x160 drivers/video/fbdev/udlfb.c:1969
dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315
dlfb_ops_set_par+0x2a3/0x840 drivers/video/fbdev/udlfb.c:1110
dlfb_usb_probe.cold+0x113e/0x1f4a drivers/video/fbdev/udlfb.c:1732
usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
Fixes: 88e58b1a42f8 ("Staging: add udlfb driver")
Reported-and-tested-by: syzbot+53ce4a4246d0fe0fee34@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/fbdev/udlfb.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index e269b1391e14..8e8af408998e 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1650,8 +1650,9 @@ static int dlfb_usb_probe(struct usb_interface *intf,
const struct device_attribute *attr;
struct dlfb_data *dlfb;
struct fb_info *info;
- int retval = -ENOMEM;
+ int retval;
struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *out;
/* usb initialization */
dlfb = kzalloc(sizeof(*dlfb), GFP_KERNEL);
@@ -1665,6 +1666,12 @@ static int dlfb_usb_probe(struct usb_interface *intf,
dlfb->udev = usb_get_dev(usbdev);
usb_set_intfdata(intf, dlfb);
+ retval = usb_find_common_endpoints(intf->cur_altsetting, NULL, &out, NULL, NULL);
+ if (retval) {
+ dev_err(&intf->dev, "Device should have at lease 1 bulk endpoint!\n");
+ goto error;
+ }
+
dev_dbg(&intf->dev, "console enable=%d\n", console);
dev_dbg(&intf->dev, "fb_defio enable=%d\n", fb_defio);
dev_dbg(&intf->dev, "shadow enable=%d\n", shadow);
@@ -1674,6 +1681,7 @@ static int dlfb_usb_probe(struct usb_interface *intf,
if (!dlfb_parse_vendor_descriptor(dlfb, intf)) {
dev_err(&intf->dev,
"firmware not recognized, incompatible device?\n");
+ retval = -ENODEV;
goto error;
}
@@ -1687,8 +1695,10 @@ static int dlfb_usb_probe(struct usb_interface *intf,
/* allocates framebuffer driver structure, not framebuffer memory */
info = framebuffer_alloc(0, &dlfb->udev->dev);
- if (!info)
+ if (!info) {
+ retval = -ENOMEM;
goto error;
+ }
dlfb->info = info;
info->par = dlfb;
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 30/84] arm64: dts: meson: remove CPU opps below 1GHz for G12B boards
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 29/84] video: fbdev: udlfb: properly check endpoint type Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 31/84] arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards Greg Kroah-Hartman
` (57 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christian Hewitt, Neil Armstrong,
Sasha Levin
From: Christian Hewitt <christianshewitt@gmail.com>
[ Upstream commit 6c4d636bc00dc17c63ffb2a73a0da850240e26e3 ]
Amlogic G12B devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.
Fixes: b96d4e92709b ("arm64: dts: meson-g12b: support a311d and s922x cpu operating points")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-2-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../boot/dts/amlogic/meson-g12b-a311d.dtsi | 40 -------------------
.../boot/dts/amlogic/meson-g12b-s922x.dtsi | 40 -------------------
2 files changed, 80 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index d61f43052a34..8e9ad1e51d66 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <731000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <761000>;
@@ -71,26 +51,6 @@ cpub_opp_table_1: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <731000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 046cc332d07f..f2543da63c39 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <731000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;
@@ -71,26 +51,6 @@ cpub_opp_table_1: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <751000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <751000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <751000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <751000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <771000>;
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 31/84] arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 30/84] arm64: dts: meson: remove CPU opps below 1GHz for G12B boards Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 32/84] mtd: rawnand: fix ecc parameters for mt7622 Greg Kroah-Hartman
` (56 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christian Hewitt, Neil Armstrong,
Sasha Levin
From: Christian Hewitt <christianshewitt@gmail.com>
[ Upstream commit fd86d85401c2049f652293877c0f7e6e5afc3bbc ]
Amlogic SM1 devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.
Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 8ba3555ca369..dd62a608c805 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -55,26 +55,6 @@ cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <730000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <730000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <730000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <666666666>;
- opp-microvolt = <750000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <770000>;
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 32/84] mtd: rawnand: fix ecc parameters for mt7622
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 31/84] arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 33/84] USB: Fix xhci event ring dequeue pointer ERDP update issue Greg Kroah-Hartman
` (55 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chuanhong Guo, Miquel Raynal, Sasha Levin
From: Chuanhong Guo <gch981213@gmail.com>
[ Upstream commit 9fe4e0d3cbfe90152137963cc024ecb63db6e8e6 ]
According to the datasheet, mt7622 only has 5 ECC capabilities instead
of 7, and the decoding error register is arranged as follows:
+------+---------+---------+---------+---------+
| Bits | 19:15 | 14:10 | 9:5 | 4:0 |
+------+---------+---------+---------+---------+
| Name | ERRNUM3 | ERRNUM2 | ERRNUM1 | ERRNUM0 |
+------+---------+---------+---------+---------+
This means err_mask should be 0x1f instead of 0x3f and the number of
bits shifted in mtk_ecc_get_stats should be 5 instead of 8.
This commit introduces err_shift for the difference in this register
and fix other existing parameters.
Public MT7622 reference manual can be found on [0] and the info this
commit is based on is from page 656 and page 660.
[0]: https://wiki.banana-pi.org/Banana_Pi_BPI-R64#Documents
Fixes: 98dea8d71931 ("mtd: nand: mtk: Support MT7622 NAND flash controller.")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220402160315.919094-1-gch981213@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/raw/mtk_ecc.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/raw/mtk_ecc.c b/drivers/mtd/nand/raw/mtk_ecc.c
index 74595b644b7c..57fa7807cd7d 100644
--- a/drivers/mtd/nand/raw/mtk_ecc.c
+++ b/drivers/mtd/nand/raw/mtk_ecc.c
@@ -43,6 +43,7 @@
struct mtk_ecc_caps {
u32 err_mask;
+ u32 err_shift;
const u8 *ecc_strength;
const u32 *ecc_regs;
u8 num_ecc_strength;
@@ -76,7 +77,7 @@ static const u8 ecc_strength_mt2712[] = {
};
static const u8 ecc_strength_mt7622[] = {
- 4, 6, 8, 10, 12, 14, 16
+ 4, 6, 8, 10, 12
};
enum mtk_ecc_regs {
@@ -221,7 +222,7 @@ void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats,
for (i = 0; i < sectors; i++) {
offset = (i >> 2) << 2;
err = readl(ecc->regs + ECC_DECENUM0 + offset);
- err = err >> ((i % 4) * 8);
+ err = err >> ((i % 4) * ecc->caps->err_shift);
err &= ecc->caps->err_mask;
if (err == ecc->caps->err_mask) {
/* uncorrectable errors */
@@ -449,6 +450,7 @@ EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
.err_mask = 0x3f,
+ .err_shift = 8,
.ecc_strength = ecc_strength_mt2701,
.ecc_regs = mt2701_ecc_regs,
.num_ecc_strength = 20,
@@ -459,6 +461,7 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
.err_mask = 0x7f,
+ .err_shift = 8,
.ecc_strength = ecc_strength_mt2712,
.ecc_regs = mt2712_ecc_regs,
.num_ecc_strength = 23,
@@ -468,10 +471,11 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
};
static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
- .err_mask = 0x3f,
+ .err_mask = 0x1f,
+ .err_shift = 5,
.ecc_strength = ecc_strength_mt7622,
.ecc_regs = mt7622_ecc_regs,
- .num_ecc_strength = 7,
+ .num_ecc_strength = 5,
.ecc_mode_shift = 4,
.parity_bits = 13,
.pg_irq_sel = 0,
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 33/84] USB: Fix xhci event ring dequeue pointer ERDP update issue
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 32/84] mtd: rawnand: fix ecc parameters for mt7622 Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 34/84] ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue Greg Kroah-Hartman
` (54 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Chen, Weitao Wang,
Mathias Nyman, Sasha Levin
From: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
[ Upstream commit e91ac20889d1a26d077cc511365cd7ff4346a6f3 ]
In some situations software handles TRB events slower than adding TRBs.
If the number of TRB events to be processed in a given interrupt is exactly
the same as the event ring size 256, then the local variable
"event_ring_deq" that holds the initial dequeue position is equal to
software_dequeue after handling all 256 interrupts.
It will cause driver to not update ERDP to hardware,
Software dequeue pointer is out of sync with ERDP on interrupt exit.
On the next interrupt, the event ring may full but driver will not
update ERDP as software_dequeue is equal to ERDP.
[ 536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37
[ 566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00
[ 572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command.
[ 572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110
[ 572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead
[ 572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD
[ 572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00
[ 572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD
Hardware ERDP is updated mid event handling if there are more than 128
events in an interrupt (half of ring size).
Fix this by updating the software local variable at the same time as
hardware ERDP.
[commit message rewording -Mathias]
Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose")
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220408134823.2527272-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/host/xhci-ring.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7fa27b403756..6cedae902adf 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2932,6 +2932,8 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
if (event_loop++ < TRBS_PER_SEGMENT / 2)
continue;
xhci_update_erst_dequeue(xhci, event_ring_deq);
+ event_ring_deq = xhci->event_ring->dequeue;
+
event_loop = 0;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 34/84] ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 33/84] USB: Fix xhci event ring dequeue pointer ERDP update issue Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 35/84] phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe Greg Kroah-Hartman
` (53 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fabio Estevam, Tim Harvey,
Max Krummenacher, Shawn Guo, Sasha Levin
From: Fabio Estevam <festevam@gmail.com>
[ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ]
On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec
on the SoM is often not detected and the following error message is
seen when the sgtl5000 driver tries to read the ID register:
sgtl5000 1-000a: Error reading chip id -6
The reason for the error is that the MCLK clock is not provided
early enough.
Fix the problem by describing the MCLK pinctrl inside the codec
node instead of placing it inside the audmux pinctrl group.
With this change applied the sgtl5000 is always detected on every boot.
Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 7c4ad541c3f5..b165bd6ea53b 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -314,6 +314,8 @@ vgen6_reg: vgen6 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_module_3v3_audio>;
VDDIO-supply = <®_module_3v3>;
@@ -543,8 +545,6 @@ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
- /* SGTL5000 sys_mclk */
- MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
@@ -810,6 +810,12 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
>;
};
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+ >;
+ };
+
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 35/84] phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 34/84] ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 36/84] phy: samsung: exynos5250-sata: fix missing device put in probe error paths Greg Kroah-Hartman
` (52 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Krzysztof Kozlowski,
Vinod Koul, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 388ec8f079f2f20d5cd183c3bc6f33cbc3ffd3ef ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220407091857.230386-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/samsung/phy-exynos5250-sata.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
index 4dd7324d91b2..5077987570fd 100644
--- a/drivers/phy/samsung/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -190,6 +190,7 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
return -EINVAL;
sata_phy->client = of_find_i2c_device_by_node(node);
+ of_node_put(node);
if (!sata_phy->client)
return -EPROBE_DEFER;
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 36/84] phy: samsung: exynos5250-sata: fix missing device put in probe error paths
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 35/84] phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 37/84] ARM: OMAP2+: Fix refcount leak in omap_gic_of_init Greg Kroah-Hartman
` (51 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, Alim Akhtar,
Vinod Koul, Sasha Levin
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 5c8402c4db45dd55c2c93c8d730f5dfa7c78a702 ]
The actions of of_find_i2c_device_by_node() in probe function should be
reversed in error paths by putting the reference to obtained device.
Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/samsung/phy-exynos5250-sata.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
index 5077987570fd..ea46576404b8 100644
--- a/drivers/phy/samsung/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -199,20 +199,21 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl");
if (IS_ERR(sata_phy->phyclk)) {
dev_err(dev, "failed to get clk for PHY\n");
- return PTR_ERR(sata_phy->phyclk);
+ ret = PTR_ERR(sata_phy->phyclk);
+ goto put_dev;
}
ret = clk_prepare_enable(sata_phy->phyclk);
if (ret < 0) {
dev_err(dev, "failed to enable source clk\n");
- return ret;
+ goto put_dev;
}
sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops);
if (IS_ERR(sata_phy->phy)) {
- clk_disable_unprepare(sata_phy->phyclk);
dev_err(dev, "failed to create PHY\n");
- return PTR_ERR(sata_phy->phy);
+ ret = PTR_ERR(sata_phy->phy);
+ goto clk_disable;
}
phy_set_drvdata(sata_phy->phy, sata_phy);
@@ -220,11 +221,18 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
phy_provider = devm_of_phy_provider_register(dev,
of_phy_simple_xlate);
if (IS_ERR(phy_provider)) {
- clk_disable_unprepare(sata_phy->phyclk);
- return PTR_ERR(phy_provider);
+ ret = PTR_ERR(phy_provider);
+ goto clk_disable;
}
return 0;
+
+clk_disable:
+ clk_disable_unprepare(sata_phy->phyclk);
+put_dev:
+ put_device(&sata_phy->client->dev);
+
+ return ret;
}
static const struct of_device_id exynos_sata_phy_of_match[] = {
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 37/84] ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 36/84] phy: samsung: exynos5250-sata: fix missing device put in probe error paths Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 38/84] phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks Greg Kroah-Hartman
` (50 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Tony Lindgren, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 0f83e6b4161617014017a694888dd8743f46f071 ]
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: fd1c07861491 ("ARM: OMAP4: Fix the init code to have OMAP4460 errata available in DT build")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220309104302.18398-1-linmq006@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-omap2/omap4-common.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5c3845730dbf..0b80f8bcd304 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
gic_dist_base_addr = of_iomap(np, 0);
+ of_node_put(np);
WARN_ON(!gic_dist_base_addr);
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
twd_base = of_iomap(np, 0);
+ of_node_put(np);
WARN_ON(!twd_base);
skip_errata_init:
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 38/84] phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 37/84] ARM: OMAP2+: Fix refcount leak in omap_gic_of_init Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 39/84] ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek Greg Kroah-Hartman
` (49 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Vinod Koul, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 3588060befff75ff39fab7122b94c6fb3148fcda ]
The corresponding API for clk_prepare_enable is clk_disable_unprepare.
Make sure that the clock is unprepared on exit by changing clk_disable
to clk_disable_unprepare.
Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/ti/phy-omap-usb2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index 3d74629d7423..471fe2e80f4e 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -157,7 +157,7 @@ static int omap_usb2_enable_clocks(struct omap_usb *phy)
return 0;
err1:
- clk_disable(phy->wkupclk);
+ clk_disable_unprepare(phy->wkupclk);
err0:
return ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 39/84] ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 38/84] phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 40/84] phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe Greg Kroah-Hartman
` (48 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mark Brown, Claudiu Beznea,
Nicolas Ferre, Sasha Levin
From: Mark Brown <broonie@kernel.org>
[ Upstream commit 0e486fe341fabd8e583f3d601a874cd394979c45 ]
The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC and is expected to be set to 12MHz. Previously
this was mapped using pre-common clock API calls in the audio machine
driver but the conversion to the common clock framework broke that so
describe things in the DT instead.
Fixes: ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220404102806.581374-2-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index bda22700110c..287566e09a67 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -217,6 +217,12 @@ i2c-gpio-0 {
wm8731: wm8731@1b {
compatible = "wm8731";
reg = <0x1b>;
+
+ /* PCK0 at 12MHz */
+ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+ clock-names = "mclk";
+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+ assigned-clock-rates = <12000000>;
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 40/84] phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 39/84] ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 41/84] phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe Greg Kroah-Hartman
` (47 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Vinod Koul, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit d644e0d79829b1b9a14beedbdb0dc1256fc3677d ]
The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to
undo pm_runtime_use_autosuspend()
In the PM Runtime docs:
Drivers in ->remove() callback should undo the runtime PM changes done
in ->probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc.
We should do this in error handling.
Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/motorola/phy-mapphone-mdm6600.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index 94a34cf75eb3..39d13f7e4cf3 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -628,7 +628,8 @@ static int phy_mdm6600_probe(struct platform_device *pdev)
cleanup:
if (error < 0)
phy_mdm6600_device_power_off(ddata);
-
+ pm_runtime_disable(ddata->dev);
+ pm_runtime_dont_use_autosuspend(ddata->dev);
return error;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 41/84] phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 40/84] phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 42/84] ARM: dts: Fix mmc order for omap3-gta04 Greg Kroah-Hartman
` (46 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Vinod Koul, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit ce88613e5bd579478653a028291098143f2a5bdf ]
The pm_runtime_enable() will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for serdes_am654_probe().
Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/phy/ti/phy-am654-serdes.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
index 6ef12017ff4e..96e3426f9293 100644
--- a/drivers/phy/ti/phy-am654-serdes.c
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -641,7 +641,7 @@ static int serdes_am654_probe(struct platform_device *pdev)
clk_err:
of_clk_del_provider(node);
-
+ pm_runtime_disable(dev);
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 42/84] ARM: dts: Fix mmc order for omap3-gta04
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 41/84] phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 43/84] ARM: dts: am3517-evm: Fix misc pinmuxing Greg Kroah-Hartman
` (45 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, H. Nikolaus Schaller, Tony Lindgren,
Sasha Levin
From: H. Nikolaus Schaller <hns@goldelico.com>
[ Upstream commit 09269dd050094593fc747f2a5853d189fefcb6b5 ]
Commit a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
introduces general mmc aliases. Let's tailor them to the need
of the GTA04 board which does not make use of mmc2 and mmc3 interfaces.
Fixes: a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Message-Id: <dc9173ee3d391d9e92b7ab8ed4f84b29f0a21c83.1646744420.git.hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 186b2af7743e..089e9f1f442b 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -31,6 +31,8 @@ chosen {
aliases {
display0 = &lcd;
display1 = &tv0;
+ /delete-property/ mmc2;
+ /delete-property/ mmc3;
};
ldo_3v3: fixedregulator {
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 43/84] ARM: dts: am3517-evm: Fix misc pinmuxing
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 42/84] ARM: dts: Fix mmc order for omap3-gta04 Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 44/84] ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35 Greg Kroah-Hartman
` (44 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Adam Ford, Tony Lindgren, Sasha Levin
From: Adam Ford <aford173@gmail.com>
[ Upstream commit 942da3af32b2288e674736eb159d1fc676261691 ]
The bootloader for the AM3517 has previously done much of the pin
muxing, but as the bootloader is moving more and more to a model
based on the device tree, it may no longer automatically mux the
pins, so it is necessary to add the pinmuxing to the Linux device
trees so the respective peripherals can remain functional.
Fixes: 6ed1d7997561 ("ARM: dts: am3517-evm: Add support for UI board and Audio")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220226214820.747847-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/am3517-evm.dts | 45 +++++++++++++++++++++++++++----
arch/arm/boot/dts/am3517-som.dtsi | 9 +++++++
2 files changed, 49 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index a1fd3e63e86e..3db30ce134b9 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -160,6 +160,8 @@ pwm11: dmtimer-pwm@11 {
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_rst_pins>;
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
#phy-cells = <0>;
@@ -167,7 +169,9 @@ hsusb1_phy: hsusb1_phy {
};
&davinci_emac {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+ status = "okay";
};
&davinci_mdio {
@@ -192,6 +196,8 @@ dpi_out: endpoint {
};
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
/* User DIP swithes [1:8] / User LEDS [1:2] */
tca6416: gpio@21 {
@@ -204,6 +210,8 @@ tca6416: gpio@21 {
};
&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
};
@@ -222,6 +230,8 @@ &mmc3 {
};
&usbhshost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_pins>;
port1-mode = "ehci-phy";
};
@@ -230,8 +240,35 @@ &usbhsehci {
};
&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb1_rst_pins>;
+
+ ethernet_pins: pinmux_ethernet_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+ OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+ OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+ OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+ OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+ OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+ OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+ OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+ OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
@@ -299,8 +336,6 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
};
&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb1_pins>;
hsusb1_pins: pinmux_hsusb1_pins {
pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@ nand@0,0 {
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
s35390a: s35390a@30 {
@@ -179,6 +181,13 @@ bluetooth {
&omap3_pmx_core {
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 44/84] ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 43/84] ARM: dts: am3517-evm: Fix misc pinmuxing Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 45/84] ipvs: correctly print the memory size of ip_vs_conn_tab Greg Kroah-Hartman
` (43 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Adam Ford, Tony Lindgren, Sasha Levin
From: Adam Ford <aford173@gmail.com>
[ Upstream commit 46ff3df87215ff42c0cd2c4bdb7d74540384a69c ]
The pinout of the OMAP35 and DM37 variants of the SOM-LV are the
same, but the macros which define the pinmuxing are different
between OMAP3530 and DM3730. The pinmuxing was correct for
for the DM3730, but wrong for the OMAP3530. Since the boot loader
was correctly pin-muxing the pins, this was not obvious. As the
bootloader not guaranteed to pinmux all the pins any more, this
causes an issue, so the pinmux needs to be moved from a common
file to their respective board files.
Fixes: f8a2e3ff7103 ("ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <20220303171818.11060-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts | 15 +++++++++++++++
arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts | 15 +++++++++++++++
arch/arm/boot/dts/logicpd-som-lv.dtsi | 15 ---------------
3 files changed, 30 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
index f7a841a28865..270e4986b6e6 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@ / {
model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3";
};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_2_pins>;
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index a604d92221a4..c757f0d7781c 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@ / {
model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_2_pins>;
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index b56524cc7fe2..55b619c99e24 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -265,21 +265,6 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
};
};
-&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb2_2_pins>;
- hsusb2_2_pins: pinmux_hsusb2_2_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
- OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
- OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
- OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
- OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
- OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
- >;
- };
-};
-
&uart2 {
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
pinctrl-names = "default";
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 45/84] ipvs: correctly print the memory size of ip_vs_conn_tab
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 44/84] ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35 Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 46/84] mtd: rawnand: Fix return value check of wait_for_completion_timeout Greg Kroah-Hartman
` (42 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pengcheng Yang, Julian Anastasov,
Simon Horman, Pablo Neira Ayuso, Sasha Levin
From: Pengcheng Yang <yangpc@wangsu.com>
[ Upstream commit eba1a872cb73314280d5448d934935b23e30b7ca ]
The memory size of ip_vs_conn_tab changed after we use hlist
instead of list.
Fixes: 731109e78415 ("ipvs: use hlist instead of list")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/ipvs/ip_vs_conn.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index d1524ca4b90e..a189079a6ea5 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -1421,7 +1421,7 @@ int __init ip_vs_conn_init(void)
pr_info("Connection hash table configured "
"(size=%d, memory=%ldKbytes)\n",
ip_vs_conn_tab_size,
- (long)(ip_vs_conn_tab_size*sizeof(struct list_head))/1024);
+ (long)(ip_vs_conn_tab_size*sizeof(*ip_vs_conn_tab))/1024);
IP_VS_DBG(0, "Each connection entry needs %zd bytes at least\n",
sizeof(struct ip_vs_conn));
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 46/84] mtd: rawnand: Fix return value check of wait_for_completion_timeout
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 45/84] ipvs: correctly print the memory size of ip_vs_conn_tab Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 47/84] bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook Greg Kroah-Hartman
` (41 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Miquel Raynal, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 084c16ab423a8890121b902b405823bfec5b4365 ]
wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.
Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220412083435.29254-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/raw/sh_flctl.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index e509c93737c4..f0e2f2d65282 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -384,7 +384,8 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
dma_addr_t dma_addr;
dma_cookie_t cookie;
uint32_t reg;
- int ret;
+ int ret = 0;
+ unsigned long time_left;
if (dir == DMA_FROM_DEVICE) {
chan = flctl->chan_fifo0_rx;
@@ -425,13 +426,14 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
goto out;
}
- ret =
+ time_left =
wait_for_completion_timeout(&flctl->dma_complete,
msecs_to_jiffies(3000));
- if (ret <= 0) {
+ if (time_left == 0) {
dmaengine_terminate_all(chan);
dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
+ ret = -ETIMEDOUT;
}
out:
@@ -441,7 +443,7 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
dma_unmap_single(chan->device->dev, dma_addr, len, dir);
- /* ret > 0 is success */
+ /* ret == 0 is success */
return ret;
}
@@ -465,7 +467,7 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
/* initiate DMA transfer */
if (flctl->chan_fifo0_rx && rlen >= 32 &&
- flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE) > 0)
+ !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE))
goto convert; /* DMA success */
/* do polling transfer */
@@ -524,7 +526,7 @@ static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
/* initiate DMA transfer */
if (flctl->chan_fifo0_tx && rlen >= 32 &&
- flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE) > 0)
+ !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE))
return; /* DMA success */
/* do polling transfer */
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 47/84] bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 46/84] mtd: rawnand: Fix return value check of wait_for_completion_timeout Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 48/84] tcp: md5: incorrect tcp_header_len for incoming connections Greg Kroah-Hartman
` (40 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eyal Birger, Daniel Borkmann, Sasha Levin
From: Eyal Birger <eyal.birger@gmail.com>
[ Upstream commit b02d196c44ead1a5949729be9ff08fe781c3e48a ]
xmit_check_hhlen() observes the dst for getting the device hard header
length to make sure a modified packet can fit. When a helper which changes
the dst - such as bpf_skb_set_tunnel_key() - is called as part of the
xmit program the accessed dst is no longer valid.
This leads to the following splat:
BUG: kernel NULL pointer dereference, address: 00000000000000de
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ #103
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
RIP: 0010:bpf_xmit+0xfb/0x17f
Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89
RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000
RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff
RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff
R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000
R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000
FS: 00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0
Call Trace:
<TASK>
lwtunnel_xmit.cold+0x71/0xc8
ip_finish_output2+0x279/0x520
? __ip_finish_output.part.0+0x21/0x130
Fix by fetching the device hard header length before running the BPF code.
Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/core/lwt_bpf.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/core/lwt_bpf.c b/net/core/lwt_bpf.c
index a5502c5aa44e..bf270b6a99b4 100644
--- a/net/core/lwt_bpf.c
+++ b/net/core/lwt_bpf.c
@@ -158,10 +158,8 @@ static int bpf_output(struct net *net, struct sock *sk, struct sk_buff *skb)
return dst->lwtstate->orig_output(net, sk, skb);
}
-static int xmit_check_hhlen(struct sk_buff *skb)
+static int xmit_check_hhlen(struct sk_buff *skb, int hh_len)
{
- int hh_len = skb_dst(skb)->dev->hard_header_len;
-
if (skb_headroom(skb) < hh_len) {
int nhead = HH_DATA_ALIGN(hh_len - skb_headroom(skb));
@@ -273,6 +271,7 @@ static int bpf_xmit(struct sk_buff *skb)
bpf = bpf_lwt_lwtunnel(dst->lwtstate);
if (bpf->xmit.prog) {
+ int hh_len = dst->dev->hard_header_len;
__be16 proto = skb->protocol;
int ret;
@@ -290,7 +289,7 @@ static int bpf_xmit(struct sk_buff *skb)
/* If the header was expanded, headroom might be too
* small for L2 header to come, expand as needed.
*/
- ret = xmit_check_hhlen(skb);
+ ret = xmit_check_hhlen(skb, hh_len);
if (unlikely(ret))
return ret;
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 48/84] tcp: md5: incorrect tcp_header_len for incoming connections
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 47/84] bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 49/84] tcp: ensure to use the most recently sent skb when filling the rate sample Greg Kroah-Hartman
` (39 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Francesco Ruggeri, Eric Dumazet,
Jakub Kicinski, Sasha Levin
From: Francesco Ruggeri <fruggeri@arista.com>
[ Upstream commit 5b0b9e4c2c895227c8852488b3f09839233bba54 ]
In tcp_create_openreq_child we adjust tcp_header_len for md5 using the
remote address in newsk. But that address is still 0 in newsk at this
point, and it is only set later by the callers (tcp_v[46]_syn_recv_sock).
Use the address from the request socket instead.
Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220421005026.686A45EC01F2@us226.sjc.aristanetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/tcp_minisocks.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 194743bd3fc1..9b038cb0a43d 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -538,7 +538,7 @@ struct sock *tcp_create_openreq_child(const struct sock *sk,
newtp->tsoffset = treq->ts_off;
#ifdef CONFIG_TCP_MD5SIG
newtp->md5sig_info = NULL; /*XXX*/
- if (newtp->af_specific->md5_lookup(sk, newsk))
+ if (treq->af_specific->req_md5_lookup(sk, req_to_sk(req)))
newtp->tcp_header_len += TCPOLEN_MD5SIG_ALIGNED;
#endif
if (skb->len >= TCP_MSS_DEFAULT + newtp->tcp_header_len)
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 49/84] tcp: ensure to use the most recently sent skb when filling the rate sample
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 48/84] tcp: md5: incorrect tcp_header_len for incoming connections Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 50/84] sctp: check asoc strreset_chunk in sctp_generate_reconf_event Greg Kroah-Hartman
` (38 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pengcheng Yang, Paolo Abeni,
Neal Cardwell, Eric Dumazet, Jakub Kicinski, Sasha Levin
From: Pengcheng Yang <yangpc@wangsu.com>
[ Upstream commit b253a0680ceadc5d7b4acca7aa2d870326cad8ad ]
If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp->delivered only changes
when we receive an ACK.
We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.
Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/tcp.h | 6 ++++++
net/ipv4/tcp_rate.c | 11 ++++++++---
2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index b914959cd2c6..b686a21a8593 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1030,6 +1030,7 @@ struct rate_sample {
int losses; /* number of packets marked lost upon ACK */
u32 acked_sacked; /* number of packets newly (S)ACKed upon ACK */
u32 prior_in_flight; /* in flight before this ACK */
+ u32 last_end_seq; /* end_seq of most recently ACKed packet */
bool is_app_limited; /* is sample from packet with bubble in pipe? */
bool is_retrans; /* is sample from retransmission? */
bool is_ack_delayed; /* is this (likely) a delayed ACK? */
@@ -1139,6 +1140,11 @@ void tcp_rate_gen(struct sock *sk, u32 delivered, u32 lost,
bool is_sack_reneg, struct rate_sample *rs);
void tcp_rate_check_app_limited(struct sock *sk);
+static inline bool tcp_skb_sent_after(u64 t1, u64 t2, u32 seq1, u32 seq2)
+{
+ return t1 > t2 || (t1 == t2 && after(seq1, seq2));
+}
+
/* These functions determine how the current flow behaves in respect of SACK
* handling. SACK is negotiated with the peer, and therefore it can vary
* between different flows.
diff --git a/net/ipv4/tcp_rate.c b/net/ipv4/tcp_rate.c
index 0de693565963..6ab197928abb 100644
--- a/net/ipv4/tcp_rate.c
+++ b/net/ipv4/tcp_rate.c
@@ -73,26 +73,31 @@ void tcp_rate_skb_sent(struct sock *sk, struct sk_buff *skb)
*
* If an ACK (s)acks multiple skbs (e.g., stretched-acks), this function is
* called multiple times. We favor the information from the most recently
- * sent skb, i.e., the skb with the highest prior_delivered count.
+ * sent skb, i.e., the skb with the most recently sent time and the highest
+ * sequence.
*/
void tcp_rate_skb_delivered(struct sock *sk, struct sk_buff *skb,
struct rate_sample *rs)
{
struct tcp_sock *tp = tcp_sk(sk);
struct tcp_skb_cb *scb = TCP_SKB_CB(skb);
+ u64 tx_tstamp;
if (!scb->tx.delivered_mstamp)
return;
+ tx_tstamp = tcp_skb_timestamp_us(skb);
if (!rs->prior_delivered ||
- after(scb->tx.delivered, rs->prior_delivered)) {
+ tcp_skb_sent_after(tx_tstamp, tp->first_tx_mstamp,
+ scb->end_seq, rs->last_end_seq)) {
rs->prior_delivered = scb->tx.delivered;
rs->prior_mstamp = scb->tx.delivered_mstamp;
rs->is_app_limited = scb->tx.is_app_limited;
rs->is_retrans = scb->sacked & TCPCB_RETRANS;
+ rs->last_end_seq = scb->end_seq;
/* Record send time of most recently ACKed packet: */
- tp->first_tx_mstamp = tcp_skb_timestamp_us(skb);
+ tp->first_tx_mstamp = tx_tstamp;
/* Find the duration of the "send phase" of this window: */
rs->interval_us = tcp_stamp_us_delta(tp->first_tx_mstamp,
scb->tx.first_tx_mstamp);
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 50/84] sctp: check asoc strreset_chunk in sctp_generate_reconf_event
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 49/84] tcp: ensure to use the most recently sent skb when filling the rate sample Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 51/84] ARM: dts: imx6ull-colibri: fix vqmmc regulator Greg Kroah-Hartman
` (37 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ying Xu, Xin Long,
Marcelo Ricardo Leitner, David S. Miller, Sasha Levin
From: Xin Long <lucien.xin@gmail.com>
[ Upstream commit 165e3e17fe8fe6a8aab319bc6e631a2e23b9a857 ]
A null pointer reference issue can be triggered when the response of a
stream reconf request arrives after the timer is triggered, such as:
send Incoming SSN Reset Request --->
CPU0:
reconf timer is triggered,
go to the handler code before hold sk lock
<--- reply with Outgoing SSN Reset Request
CPU1:
process Outgoing SSN Reset Request,
and set asoc->strreset_chunk to NULL
CPU0:
continue the handler code, hold sk lock,
and try to hold asoc->strreset_chunk, crash!
In Ying Xu's testing, the call trace is:
[ ] BUG: kernel NULL pointer dereference, address: 0000000000000010
[ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp]
[ ] Call Trace:
[ ] <IRQ>
[ ] sctp_sf_send_reconf+0x2c/0x100 [sctp]
[ ] sctp_do_sm+0xa4/0x220 [sctp]
[ ] sctp_generate_reconf_event+0xbd/0xe0 [sctp]
[ ] call_timer_fn+0x26/0x130
This patch is to fix it by returning from the timer handler if asoc
strreset_chunk is already set to NULL.
Fixes: 7b9438de0cd4 ("sctp: add stream reconf timer")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/sctp/sm_sideeffect.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 0d225f891b61..8d32229199b9 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -458,6 +458,10 @@ void sctp_generate_reconf_event(struct timer_list *t)
goto out_unlock;
}
+ /* This happens when the response arrives after the timer is triggered. */
+ if (!asoc->strreset_chunk)
+ goto out_unlock;
+
error = sctp_do_sm(net, SCTP_EVENT_T_TIMEOUT,
SCTP_ST_TIMEOUT(SCTP_EVENT_TIMEOUT_RECONF),
asoc->state, asoc->ep, asoc,
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 51/84] ARM: dts: imx6ull-colibri: fix vqmmc regulator
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 50/84] sctp: check asoc strreset_chunk in sctp_generate_reconf_event Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 52/84] arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock Greg Kroah-Hartman
` (36 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Max Krummenacher, Denys Drozdov,
Marcel Ziswiler, Shawn Guo, Sasha Levin
From: Max Krummenacher <max.krummenacher@toradex.com>
[ Upstream commit 45974e4276a8d6653394f66666fc57d8ffa6de9a ]
The correct spelling for the property is gpios. Otherwise, the regulator
will neither reserve nor control any GPIOs. Thus, any SD/MMC card which
can use UHS-I modes will fail.
Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6ull-colibri.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index d56728f03c35..c83323b9ea53 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -37,7 +37,7 @@ reg_module_3v3_avdd: regulator-module-3v3-avdd {
reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-gpio";
- gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_reg_sd>;
regulator-always-on;
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 52/84] arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 51/84] ARM: dts: imx6ull-colibri: fix vqmmc regulator Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 53/84] pinctrl: pistachio: fix use of irq_of_parse_and_map() Greg Kroah-Hartman
` (35 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Fabio Estevam, Shawn Guo, Sasha Levin
From: Fabio Estevam <festevam@denx.de>
[ Upstream commit 0310b5aa0656a94102344f1e9ae2892e342a665d ]
The ROHM BD71847 PMIC has a 32.768 kHz clock.
Describe the PMIC clock to fix the following boot errors:
bd718xx-clk bd71847-clk.1.auto: No parent clk found
bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22
Based on the same fix done for imx8mm-evk as per commit
a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")
Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 9ad1d43b8ce7..4fa39654b695 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -213,6 +213,10 @@ pmic@4b {
interrupts = <3 GPIO_ACTIVE_LOW>;
rohm,reset-snvs-powered;
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
regulators {
buck1_reg: BUCK1 {
regulator-name = "BUCK1";
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 53/84] pinctrl: pistachio: fix use of irq_of_parse_and_map()
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 52/84] arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 54/84] cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe Greg Kroah-Hartman
` (34 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zeal Robot, Lv Ruyi, Linus Walleij,
Sasha Levin
From: Lv Ruyi <lv.ruyi@zte.com.cn>
[ Upstream commit 0c9843a74a85224a89daa81fa66891dae2f930e1 ]
The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.
Fixes: cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220424031430.3170759-1-lv.ruyi@zte.com.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/pinctrl-pistachio.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c
index 379e9a6a6d89..5f381e4c7577 100644
--- a/drivers/pinctrl/pinctrl-pistachio.c
+++ b/drivers/pinctrl/pinctrl-pistachio.c
@@ -1370,10 +1370,10 @@ static int pistachio_gpio_register(struct pistachio_pinctrl *pctl)
}
irq = irq_of_parse_and_map(child, 0);
- if (irq < 0) {
- dev_err(pctl->dev, "No IRQ for bank %u: %d\n", i, irq);
+ if (!irq) {
+ dev_err(pctl->dev, "No IRQ for bank %u\n", i);
of_node_put(child);
- ret = irq;
+ ret = -EINVAL;
goto err;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 54/84] cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 53/84] pinctrl: pistachio: fix use of irq_of_parse_and_map() Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 55/84] net: hns3: add validity check for message data length Greg Kroah-Hartman
` (33 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Xiaobing Luo, Samuel Holland,
Viresh Kumar, Sasha Levin
From: Xiaobing Luo <luoxiaobing0926@gmail.com>
[ Upstream commit 1aa24a8f3b5133dae4bc1e57427e345445f3e902 ]
--------------------------------------------
unreferenced object 0xffff000010742a00 (size 128):
comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000b4dfebaa>] __kmalloc+0x338/0x474
[<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c
[<000000007d6082a0>] platform_probe+0x98/0x11c
[<00000000c990f549>] really_probe+0x234/0x5a0
[<000000002d9fecc6>] __driver_probe_device+0x194/0x224
[<00000000cf0b94fa>] driver_probe_device+0x64/0x13c
[<00000000f238e4cf>] __device_attach_driver+0xf8/0x180
[<000000006720e418>] bus_for_each_drv+0xf8/0x160
[<00000000df4f14f6>] __device_attach+0x174/0x29c
[<00000000782002fb>] device_initial_probe+0x20/0x30
[<00000000c2681b06>] bus_probe_device+0xfc/0x110
[<00000000964cf3bd>] device_add+0x5f0/0xcd0
[<000000004b9264e3>] platform_device_add+0x198/0x390
[<00000000fa82a9d0>] platform_device_register_full+0x178/0x210
[<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168
[<000000000377cc7c>] do_one_initcall+0xe4/0x570
--------------------------------------------
if sun50i_cpufreq_get_efuse failed, then opp_tables leak.
Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/sun50i-cpufreq-nvmem.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
index 2deed8d8773f..75e1bf3a08f7 100644
--- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
@@ -98,8 +98,10 @@ static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
return -ENOMEM;
ret = sun50i_cpufreq_get_efuse(&speed);
- if (ret)
+ if (ret) {
+ kfree(opp_tables);
return ret;
+ }
snprintf(name, MAX_NAME_LEN, "speed%d", speed);
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 55/84] net: hns3: add validity check for message data length
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 54/84] cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 56/84] net/smc: sync err code when tcp connection was refused Greg Kroah-Hartman
` (32 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jian Shen, Guangbin Huang,
David S. Miller, Sasha Levin
From: Jian Shen <shenjian15@huawei.com>
[ Upstream commit 7d413735cb18ff73aaba3457b16b08332e8d3cc4 ]
Add validity check for message data length in function
hclge_send_mbx_msg(), avoid unexpected overflow.
Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 23a706a1765a..410a9bf7bf0a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -64,6 +64,13 @@ static int hclge_send_mbx_msg(struct hclge_vport *vport, u8 *msg, u16 msg_len,
enum hclge_cmd_status status;
struct hclge_desc desc;
+ if (msg_len > HCLGE_MBX_MAX_MSG_SIZE) {
+ dev_err(&hdev->pdev->dev,
+ "msg data length(=%u) exceeds maximum(=%u)\n",
+ msg_len, HCLGE_MBX_MAX_MSG_SIZE);
+ return -EMSGSIZE;
+ }
+
resp_pf_to_vf = (struct hclge_mbx_pf_to_vf_cmd *)desc.data;
hclge_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_MBX_PF_TO_VF, false);
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 56/84] net/smc: sync err code when tcp connection was refused
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 55/84] net: hns3: add validity check for message data length Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 57/84] ip_gre: Make o_seqno start from 0 in native mode Greg Kroah-Hartman
` (31 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, liuyacan, Tony Lu, Karsten Graul,
David S. Miller, Sasha Levin
From: liuyacan <liuyacan@corp.netease.com>
[ Upstream commit 4e2e65e2e56c6ceb4ea1719360080c0af083229e ]
In the current implementation, when TCP initiates a connection
to an unavailable [ip,port], ECONNREFUSED will be stored in the
TCP socket, but SMC will not. However, some apps (like curl) use
getsockopt(,,SO_ERROR,,) to get the error information, which makes
them miss the error message and behave strangely.
Fixes: 50717a37db03 ("net/smc: nonblocking connect rework")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/smc/af_smc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 5221092cc66d..a5a8cca46bd5 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -816,6 +816,8 @@ static void smc_connect_work(struct work_struct *work)
smc->sk.sk_state = SMC_CLOSED;
if (rc == -EPIPE || rc == -EAGAIN)
smc->sk.sk_err = EPIPE;
+ else if (rc == -ECONNREFUSED)
+ smc->sk.sk_err = ECONNREFUSED;
else if (signal_pending(current))
smc->sk.sk_err = -sock_intr_errno(timeo);
sock_put(&smc->sk); /* passive closing */
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 57/84] ip_gre: Make o_seqno start from 0 in native mode
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 56/84] net/smc: sync err code when tcp connection was refused Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 58/84] tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT Greg Kroah-Hartman
` (30 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peilin Ye, William Tu,
David S. Miller, Sasha Levin
From: Peilin Ye <peilin.ye@bytedance.com>
[ Upstream commit ff827beb706ed719c766acf36449801ded0c17fc ]
For GRE and GRETAP devices, currently o_seqno starts from 1 in native
mode. According to RFC 2890 2.2., "The first datagram is sent with a
sequence number of 0." Fix it.
It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to
gre_build_header() before getting incremented.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/ip_gre.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index f67f1d27f565..5b38d03f6d79 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -432,14 +432,12 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev,
__be16 proto)
{
struct ip_tunnel *tunnel = netdev_priv(dev);
-
- if (tunnel->parms.o_flags & TUNNEL_SEQ)
- tunnel->o_seqno++;
+ __be16 flags = tunnel->parms.o_flags;
/* Push GRE header. */
gre_build_header(skb, tunnel->tun_hlen,
- tunnel->parms.o_flags, proto, tunnel->parms.o_key,
- htonl(tunnel->o_seqno));
+ flags, proto, tunnel->parms.o_key,
+ (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol);
}
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 58/84] tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 57/84] ip_gre: Make o_seqno start from 0 in native mode Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 59/84] bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create() Greg Kroah-Hartman
` (29 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Doug Porter,
Soheil Hassas Yeganeh, Neal Cardwell, David S. Miller,
Sasha Levin
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 4bfe744ff1644fbc0a991a2677dc874475dd6776 ]
I had this bug sitting for too long in my pile, it is time to fix it.
Thanks to Doug Porter for reminding me of it!
We had various attempts in the past, including commit
0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"),
but the issue is that TCP stack currently only generates
EPOLLOUT from input path, when tp->snd_una has advanced
and skb(s) cleaned from rtx queue.
If a flow has a big RTT, and/or receives SACKs, it is possible
that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0
and no more data can be sent until tp->snd_una finally advances.
What is needed is to also check if POLLOUT needs to be generated
whenever tp->snd_nxt is advanced, from output path.
This bug triggers more often after an idle period, as
we do not receive ACK for at least one RTT. tcp_notsent_lowat
could be a fraction of what CWND and pacing rate would allow to
send during this RTT.
In a followup patch, I will remove the bogus call
to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED)
from tcp_check_space(). Fact that we have decided to generate
an EPOLLOUT does not mean the application has immediately
refilled the transmit queue. This optimistic call
might have been the reason the bug seemed not too serious.
Tested:
200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2]
$ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat
$ cat bench_rr.sh
SUM=0
for i in {1..10}
do
V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"`
echo $V
SUM=$(($SUM + $V))
done
echo SUM=$SUM
Before patch:
$ bench_rr.sh
130000000
80000000
140000000
140000000
140000000
140000000
130000000
40000000
90000000
110000000
SUM=1140000000
After patch:
$ bench_rr.sh
430000000
590000000
530000000
450000000
450000000
350000000
450000000
490000000
480000000
460000000
SUM=4680000000 # This is 410 % of the value before patch.
Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Doug Porter <dsp@fb.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/tcp.h | 1 +
net/ipv4/tcp_input.c | 12 +++++++++++-
net/ipv4/tcp_output.c | 1 +
3 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index b686a21a8593..9237362e5606 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -603,6 +603,7 @@ void tcp_synack_rtt_meas(struct sock *sk, struct request_sock *req);
void tcp_reset(struct sock *sk);
void tcp_skb_mark_lost_uncond_verify(struct tcp_sock *tp, struct sk_buff *skb);
void tcp_fin(struct sock *sk);
+void tcp_check_space(struct sock *sk);
/* tcp_timer.c */
void tcp_init_xmit_timers(struct sock *);
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index c0fcfa296468..f84047aec63c 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5230,7 +5230,17 @@ static void tcp_new_space(struct sock *sk)
sk->sk_write_space(sk);
}
-static void tcp_check_space(struct sock *sk)
+/* Caller made space either from:
+ * 1) Freeing skbs in rtx queues (after tp->snd_una has advanced)
+ * 2) Sent skbs from output queue (and thus advancing tp->snd_nxt)
+ *
+ * We might be able to generate EPOLLOUT to the application if:
+ * 1) Space consumed in output/rtx queues is below sk->sk_sndbuf/2
+ * 2) notsent amount (tp->write_seq - tp->snd_nxt) became
+ * small enough that tcp_stream_memory_free() decides it
+ * is time to generate EPOLLOUT.
+ */
+void tcp_check_space(struct sock *sk)
{
if (sock_flag(sk, SOCK_QUEUE_SHRUNK)) {
sock_reset_flag(sk, SOCK_QUEUE_SHRUNK);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 139e962d1aef..67493ec6318a 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -81,6 +81,7 @@ static void tcp_event_new_data_sent(struct sock *sk, struct sk_buff *skb)
NET_ADD_STATS(sock_net(sk), LINUX_MIB_TCPORIGDATASENT,
tcp_skb_pcount(skb));
+ tcp_check_space(sk);
}
/* SND.NXT, if window was not shrunk or the amount of shrunk was less than one
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 59/84] bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 58/84] tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 60/84] clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource() Greg Kroah-Hartman
` (28 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Samuel Holland,
Jernej Skrabec, Sasha Levin
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Upstream commit fff8c10368e64e7f8960f149375c12ca5f3b30af ]
This code is really spurious.
It always returns an ERR_PTR, even when err is known to be 0 and calls
put_device() after a successful device_register() call.
It is likely that the return statement in the normal path is missing.
Add 'return rdev;' to fix it.
Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bus/sunxi-rsb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index 1bb00a959c67..9b1a5e62417c 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -224,6 +224,8 @@ static struct sunxi_rsb_device *sunxi_rsb_device_create(struct sunxi_rsb *rsb,
dev_dbg(&rdev->dev, "device %s registered\n", dev_name(&rdev->dev));
+ return rdev;
+
err_device_add:
put_device(&rdev->dev);
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 60/84] clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 59/84] bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create() Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 61/84] net: bcmgenet: hide status block before TX timestamping Greg Kroah-Hartman
` (27 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yang Yingliang, Samuel Holland,
Jernej Skrabec, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit f58ca215cda1975f77b2b762903684a3c101bec9 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/clk/sunxi/clk-sun9i-mmc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/sunxi/clk-sun9i-mmc.c b/drivers/clk/sunxi/clk-sun9i-mmc.c
index 542b31d6e96d..636bcf2439ef 100644
--- a/drivers/clk/sunxi/clk-sun9i-mmc.c
+++ b/drivers/clk/sunxi/clk-sun9i-mmc.c
@@ -109,6 +109,8 @@ static int sun9i_a80_mmc_config_clk_probe(struct platform_device *pdev)
spin_lock_init(&data->lock);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -EINVAL;
/* one clock/reset pair per word */
count = DIV_ROUND_UP((resource_size(r)), SUN9I_MMC_WIDTH);
data->membase = devm_ioremap_resource(&pdev->dev, r);
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 61/84] net: bcmgenet: hide status block before TX timestamping
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 60/84] clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource() Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 62/84] net: dsa: lantiq_gswip: Dont set GSWIP_MII_CFG_RMII_CLK Greg Kroah-Hartman
` (26 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonathan Lemon, Florian Fainelli,
Paolo Abeni, Sasha Levin
From: Jonathan Lemon <jonathan.lemon@gmail.com>
[ Upstream commit acac0541d1d65e81e599ec399d34d184d2424401 ]
The hardware checksum offloading requires use of a transmit
status block inserted before the outgoing frame data, this was
updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")'
However, skb_tx_timestamp() assumes that it is passed a raw frame
and PTP parsing chokes on this status block.
Fix this by calling __skb_pull(), which hides the TSB before calling
skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.
As the data in the skb has already been set up for DMA, and the
dma_unmap_* calls use a separately stored address, there is no
no effective change in the data transmission.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com
Fixes: d03825fba459 ("net: bcmgenet: add skb_tx_timestamp call")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 2affdddc12bf..e03e2bfcc6a1 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1547,6 +1547,11 @@ static struct sk_buff *bcmgenet_put_tx_csum(struct net_device *dev,
return skb;
}
+static void bcmgenet_hide_tsb(struct sk_buff *skb)
+{
+ __skb_pull(skb, sizeof(struct status_64));
+}
+
static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
@@ -1655,6 +1660,8 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
}
GENET_CB(skb)->last_cb = tx_cb_ptr;
+
+ bcmgenet_hide_tsb(skb);
skb_tx_timestamp(skb);
/* Decrement total BD count and advance our write pointer */
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 62/84] net: dsa: lantiq_gswip: Dont set GSWIP_MII_CFG_RMII_CLK
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 61/84] net: bcmgenet: hide status block before TX timestamping Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 63/84] drm/amd/display: Fix memory leak in dcn21_clock_source_create Greg Kroah-Hartman
` (25 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jan Hoffmann, Martin Blumenstingl,
Hauke Mehrtens, Jakub Kicinski, Sasha Levin
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[ Upstream commit 71cffebf6358a7f5031f5b208bbdc1cb4db6e539 ]
Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining
GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp
register. It helped bring this register into a well-defined state so the
driver has to rely less on the bootloader to do things right.
Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any
possibility to configure it. Upon further testing it turns out that all
boards which are supported by the GSWIP driver in OpenWrt which use an
RMII PHY have a dedicated oscillator on the board which provides the
50MHz RMII reference clock.
Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always
clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is
a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set
the MAC also generates the RMII reference clock whose signal then
conflicts with the signal from the oscillator on the board. This results
in a constant cycle of the PHY detecting link up/down (and as a result
of that: the two ports using the AR8030 PHYs are not working).
At the time of writing this patch there's no known board where the MAC
(GSWIP) has to generate the RMII reference clock. If needed this can be
implemented in future by providing a device-tree flag so the
GSWIP_MII_CFG_RMII_CLK bit can be toggled per port.
Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits")
Tested-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/lantiq_gswip.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 60e36f46f8ab..0c191d395f8f 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1607,9 +1607,6 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
break;
case PHY_INTERFACE_MODE_RMII:
miicfg |= GSWIP_MII_CFG_MODE_RMIIM;
-
- /* Configure the RMII clock as output: */
- miicfg |= GSWIP_MII_CFG_RMII_CLK;
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 63/84] drm/amd/display: Fix memory leak in dcn21_clock_source_create
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 62/84] net: dsa: lantiq_gswip: Dont set GSWIP_MII_CFG_RMII_CLK Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 64/84] tls: Skip tls_append_frag on zero copy size Greg Kroah-Hartman
` (24 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Alex Deucher, Sasha Levin
From: Miaoqian Lin <linmq006@gmail.com>
[ Upstream commit 65e54987508b6f0771f56bdfa3ee1926d52785ae ]
When dcn20_clk_src_construct() fails, we need to release clk_src.
Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 11a4c4029a90..acc2c307c871 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -1140,6 +1140,7 @@ static struct clock_source *dcn21_clock_source_create(
return &clk_src->base;
}
+ kfree(clk_src);
BREAK_TO_DEBUGGER();
return NULL;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 64/84] tls: Skip tls_append_frag on zero copy size
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 63/84] drm/amd/display: Fix memory leak in dcn21_clock_source_create Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 65/84] bnx2x: fix napi API usage sequence Greg Kroah-Hartman
` (23 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maxim Mikityanskiy, Tariq Toukan,
Jakub Kicinski, Sasha Levin
From: Maxim Mikityanskiy <maximmi@nvidia.com>
[ Upstream commit a0df71948e9548de819a6f1da68f5f1742258a52 ]
Calling tls_append_frag when max_open_record_len == record->len might
add an empty fragment to the TLS record if the call happens to be on the
page boundary. Normally tls_append_frag coalesces the zero-sized
fragment to the previous one, but not if it's on page boundary.
If a resync happens then, the mlx5 driver posts dump WQEs in
tx_post_resync_dump, and the empty fragment may become a data segment
with byte_count == 0, which will confuse the NIC and lead to a CQE
error.
This commit fixes the described issue by skipping tls_append_frag on
zero size to avoid adding empty fragments. The fix is not in the driver,
because an empty fragment is hardly the desired behavior.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220426154949.159055-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/tls/tls_device.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c
index 0f034c3bc37d..abb93f7343c5 100644
--- a/net/tls/tls_device.c
+++ b/net/tls/tls_device.c
@@ -470,11 +470,13 @@ static int tls_push_data(struct sock *sk,
copy = min_t(size_t, size, (pfrag->size - pfrag->offset));
copy = min_t(size_t, copy, (max_open_record_len - record->len));
- rc = tls_device_copy_data(page_address(pfrag->page) +
- pfrag->offset, copy, msg_iter);
- if (rc)
- goto handle_error;
- tls_append_frag(record, pfrag, copy);
+ if (copy) {
+ rc = tls_device_copy_data(page_address(pfrag->page) +
+ pfrag->offset, copy, msg_iter);
+ if (rc)
+ goto handle_error;
+ tls_append_frag(record, pfrag, copy);
+ }
size -= copy;
if (!size) {
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 65/84] bnx2x: fix napi API usage sequence
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 64/84] tls: Skip tls_append_frag on zero copy size Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 66/84] ixgbe: ensure IPsec VF<->PF compatibility Greg Kroah-Hartman
` (22 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Christensen, Manish Chopra,
Ariel Elior, Jakub Kicinski, Sasha Levin
From: Manish Chopra <manishc@marvell.com>
[ Upstream commit af68656d66eda219b7f55ce8313a1da0312c79e1 ]
While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.
System message log shows the following:
=======================================
[ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures.
[ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)'
[ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports:
'need reset'
[ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports:
'need reset'
[ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset'
[ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow:
[ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows:
[ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow:
[ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows:
[ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset'
[ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->slot_reset()
[ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing...
[ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset
--> driver unload
Uninterruptible tasks
=====================
crash> ps | grep UN
213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd]
215 2 0 c000000004c80000 UN 0.0 0 0
[kworker/0:2]
2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd
4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty
4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty
32423 2 26 c00000020038c580 UN 0.0 0 0
[kworker/26:3]
32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd
32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail
33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail
33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup
33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd
33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail
33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd
EEH handler hung while bnx2x sleeping and holding RTNL lock
===========================================================
crash> bt 213
PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd"
#0 [c000000004d477e0] __schedule at c000000000c70808
#1 [c000000004d478b0] schedule at c000000000c70ee0
#2 [c000000004d478e0] schedule_timeout at c000000000c76dec
#3 [c000000004d479c0] msleep at c0000000002120cc
#4 [c000000004d479f0] napi_disable at c000000000a06448
^^^^^^^^^^^^^^^^
#5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x]
#6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x]
#7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc
#8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8
#9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64
And the sleeping source code
============================
crash> dis -ls c000000000a06448
FILE: ../net/core/dev.c
LINE: 6702
6697 {
6698 might_sleep();
6699 set_bit(NAPI_STATE_DISABLE, &n->state);
6700
6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
* 6702 msleep(1);
6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
6704 msleep(1);
6705
6706 hrtimer_cancel(&n->timer);
6707
6708 clear_bit(NAPI_STATE_DISABLE, &n->state);
6709 }
EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:
bnx2x_io_error_detected()
+-> bnx2x_eeh_nic_unload()
+-> bnx2x_del_all_napi()
+-> __netif_napi_del()
bnx2x_io_slot_reset()
+-> bnx2x_netif_stop()
+-> bnx2x_napi_disable()
+->napi_disable()
Fix this by correcting the sequence of NAPI APIs usage,
that is delete the NAPI after disabling it.
Fixes: 7fa6f34081f1 ("bnx2x: AER revised")
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index cff64e43bdd8..b5f58c62e7d2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -14267,10 +14267,6 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
/* Stop Tx */
bnx2x_tx_disable(bp);
- /* Delete all NAPI objects */
- bnx2x_del_all_napi(bp);
- if (CNIC_LOADED(bp))
- bnx2x_del_all_napi_cnic(bp);
netdev_reset_tc(bp->dev);
del_timer_sync(&bp->timer);
@@ -14375,6 +14371,11 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
bnx2x_drain_tx_queues(bp);
bnx2x_send_unload_req(bp, UNLOAD_RECOVERY);
bnx2x_netif_stop(bp, 1);
+ bnx2x_del_all_napi(bp);
+
+ if (CNIC_LOADED(bp))
+ bnx2x_del_all_napi_cnic(bp);
+
bnx2x_free_irq(bp);
/* Report UNLOAD_DONE to MCP */
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 66/84] ixgbe: ensure IPsec VF<->PF compatibility
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 65/84] bnx2x: fix napi API usage sequence Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 67/84] tcp: fix F-RTO may not work correctly when receiving DSACK Greg Kroah-Hartman
` (21 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Raed Salem, Leon Romanovsky,
Shannon Nelson, Konrad Jankowski, Tony Nguyen, Jakub Kicinski,
Sasha Levin
From: Leon Romanovsky <leonro@nvidia.com>
[ Upstream commit f049efc7f7cd2f3c419f55040928eaefb13b3636 ]
The VF driver can forward any IPsec flags and such makes the function
is not extendable and prone to backward/forward incompatibility.
If new software runs on VF, it won't know that PF configured something
completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag.
Fixes: eda0333ac293 ("ixgbe: add VF IPsec management")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index b14b164c9601..5799b434165e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -903,7 +903,8 @@ int ixgbe_ipsec_vf_add_sa(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
/* Tx IPsec offload doesn't seem to work on this
* device, so block these requests for now.
*/
- if (!(sam->flags & XFRM_OFFLOAD_INBOUND)) {
+ sam->flags = sam->flags & ~XFRM_OFFLOAD_IPV6;
+ if (sam->flags != XFRM_OFFLOAD_INBOUND) {
err = -EOPNOTSUPP;
goto err_out;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 67/84] tcp: fix F-RTO may not work correctly when receiving DSACK
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 66/84] ixgbe: ensure IPsec VF<->PF compatibility Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 68/84] ASoC: wm8731: Disable the regulator when probing fails Greg Kroah-Hartman
` (20 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pengcheng Yang, Neal Cardwell,
Eric Dumazet, Jakub Kicinski, Sasha Levin
From: Pengcheng Yang <yangpc@wangsu.com>
[ Upstream commit d9157f6806d1499e173770df1f1b234763de5c79 ]
Currently DSACK is regarded as a dupack, which may cause
F-RTO to incorrectly enter "loss was real" when receiving
DSACK.
Packetdrill to demonstrate:
// Enable F-RTO and TLP
0 `sysctl -q net.ipv4.tcp_frto=2`
0 `sysctl -q net.ipv4.tcp_early_retrans=3`
0 `sysctl -q net.ipv4.tcp_congestion_control=cubic`
// Establish a connection
+0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// RTT 10ms, RTO 210ms
+.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <...>
+.01 < . 1:1(0) ack 1 win 257
+0 accept(3, ..., ...) = 4
// Send 2 data segments
+0 write(4, ..., 2000) = 2000
+0 > P. 1:2001(2000) ack 1
// TLP
+.022 > P. 1001:2001(1000) ack 1
// Continue to send 8 data segments
+0 write(4, ..., 10000) = 10000
+0 > P. 2001:10001(8000) ack 1
// RTO
+.188 > . 1:1001(1000) ack 1
// The original data is acked and new data is sent(F-RTO step 2.b)
+0 < . 1:1(0) ack 2001 win 257
+0 > P. 10001:12001(2000) ack 1
// D-SACK caused by TLP is regarded as a dupack, this results in
// the incorrect judgment of "loss was real"(F-RTO step 3.a)
+.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop>
// Never-retransmitted data(3001:4001) are acked and
// expect to switch to open state(F-RTO step 3.b)
+0 < . 1:1(0) ack 4001 win 257
+0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }%
Fixes: e33099f96d99 ("tcp: implement RFC5682 F-RTO")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/tcp_input.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index f84047aec63c..b0e6fc2c5e10 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3717,7 +3717,8 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
tcp_process_tlp_ack(sk, ack, flag);
if (tcp_ack_is_dubious(sk, flag)) {
- if (!(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP))) {
+ if (!(flag & (FLAG_SND_UNA_ADVANCED |
+ FLAG_NOT_DUP | FLAG_DSACKING_ACK))) {
num_dupack = 1;
/* Consider if pure acks were aggregated in tcp_add_backlog() */
if (!(flag & FLAG_DATA))
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 68/84] ASoC: wm8731: Disable the regulator when probing fails
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 67/84] tcp: fix F-RTO may not work correctly when receiving DSACK Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 69/84] ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit() Greg Kroah-Hartman
` (19 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Zheyu Ma, Mark Brown, Sasha Levin
From: Zheyu Ma <zheyuma97@gmail.com>
[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ]
When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().
The following log reveals it:
[ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[ 17.824467] Call Trace:
[ 17.824774] <TASK>
[ 17.825040] regulator_bulk_free+0x82/0xe0
[ 17.825514] devres_release_group+0x319/0x3d0
[ 17.825882] i2c_device_probe+0x766/0x940
[ 17.829198] i2c_register_driver+0xb5/0x130
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/wm8731.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 6fd1bef848ed..fa55d79b39b6 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -601,7 +601,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
ret = wm8731_reset(wm8731->regmap);
if (ret < 0) {
dev_err(dev, "Failed to issue reset: %d\n", ret);
- goto err_regulator_enable;
+ goto err;
}
/* Clear POWEROFF, keep everything else disabled */
@@ -618,10 +618,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
regcache_mark_dirty(wm8731->regmap);
-err_regulator_enable:
- /* Regulators will be enabled by bias management */
- regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
+err:
return ret;
}
@@ -765,21 +762,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(wm8731->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
- return ret;
+ goto err_regulator_enable;
}
ret = wm8731_hw_init(&i2c->dev, wm8731);
if (ret != 0)
- return ret;
+ goto err_regulator_enable;
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm8731, &wm8731_dai, 1);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
- return ret;
+ goto err_regulator_enable;
}
return 0;
+
+err_regulator_enable:
+ /* Regulators will be enabled by bias management */
+ regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+
+ return ret;
}
static int wm8731_i2c_remove(struct i2c_client *client)
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 69/84] ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit()
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 68/84] ASoC: wm8731: Disable the regulator when probing fails Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 70/84] x86: __memcpy_flushcache: fix wrong alignment if size > 2^32 Greg Kroah-Hartman
` (18 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Cong Wang, Peilin Ye,
David S. Miller, Sasha Levin
From: Peilin Ye <peilin.ye@bytedance.com>
[ Upstream commit f40c064e933d7787ca7411b699504d7a2664c1f5 ]
Do not update tunnel->tun_hlen in data plane code. Use a local variable
instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit().
Co-developed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/ip6_gre.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index 5dbc280d4385..e550db28aabb 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -730,6 +730,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
struct ip_tunnel_info *tun_info;
const struct ip_tunnel_key *key;
__be16 flags;
+ int tun_hlen;
tun_info = skb_tunnel_info(skb);
if (unlikely(!tun_info ||
@@ -748,9 +749,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
dsfield = key->tos;
flags = key->tun_flags &
(TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ);
- tunnel->tun_hlen = gre_calc_hlen(flags);
+ tun_hlen = gre_calc_hlen(flags);
- gre_build_header(skb, tunnel->tun_hlen,
+ gre_build_header(skb, tun_hlen,
flags, protocol,
tunnel_id_to_key32(tun_info->key.tun_id),
(flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 70/84] x86: __memcpy_flushcache: fix wrong alignment if size > 2^32
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 69/84] ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit() Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 71/84] cifs: destage any unwritten data to the server before calling copychunk_write Greg Kroah-Hartman
` (17 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mikulas Patocka, Linus Torvalds, Sasha Levin
From: Mikulas Patocka <mpatocka@redhat.com>
[ Upstream commit a6823e4e360fe975bd3da4ab156df7c74c8b07f3 ]
The first "if" condition in __memcpy_flushcache is supposed to align the
"dest" variable to 8 bytes and copy data up to this alignment. However,
this condition may misbehave if "size" is greater than 4GiB.
The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both
arguments to unsigned int and selects the smaller one. However, the
cast truncates high bits in "size" and it results in misbehavior.
For example:
suppose that size == 0x100000001, dest == 0x200000002
min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
...
dest += 0x1;
so we copy just one byte "and" dest remains unaligned.
This patch fixes the bug by replacing unsigned with size_t.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/lib/usercopy_64.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index 1847e993ac63..f3f7f4cb15a6 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -142,7 +142,7 @@ void __memcpy_flushcache(void *_dst, const void *_src, size_t size)
/* cache copy and flush to align dest */
if (!IS_ALIGNED(dest, 8)) {
- unsigned len = min_t(unsigned, size, ALIGN(dest, 8) - dest);
+ size_t len = min_t(size_t, size, ALIGN(dest, 8) - dest);
memcpy((void *) dest, (void *) source, len);
clean_cache_range((void *) dest, len);
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 71/84] cifs: destage any unwritten data to the server before calling copychunk_write
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 70/84] x86: __memcpy_flushcache: fix wrong alignment if size > 2^32 Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 72/84] drivers: net: hippi: Fix deadlock in rr_close() Greg Kroah-Hartman
` (16 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Xiaoli Feng, Ronnie Sahlberg,
Steve French, Sasha Levin
From: Ronnie Sahlberg <lsahlber@redhat.com>
[ Upstream commit f5d0f921ea362636e4a2efb7c38d1ead373a8700 ]
because the copychunk_write might cover a region of the file that has not yet
been sent to the server and thus fail.
A simple way to reproduce this is:
truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile
the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with
the 'fcollapse 16k 24k' due to write-back caching.
fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call
and it will fail serverside since the file is still 0b in size serverside
until the writes have been destaged.
To avoid this we must ensure that we destage any unwritten data to the
server before calling COPYCHUNK_WRITE.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/smb2ops.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index defee1d208d2..7985fe25850b 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1643,9 +1643,17 @@ smb2_copychunk_range(const unsigned int xid,
int chunks_copied = 0;
bool chunk_sizes_updated = false;
ssize_t bytes_written, total_bytes_written = 0;
+ struct inode *inode;
pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL);
+ /*
+ * We need to flush all unwritten data before we can send the
+ * copychunk ioctl to the server.
+ */
+ inode = d_inode(trgtfile->dentry);
+ filemap_write_and_wait(inode->i_mapping);
+
if (pcchunk == NULL)
return -ENOMEM;
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 72/84] drivers: net: hippi: Fix deadlock in rr_close()
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 71/84] cifs: destage any unwritten data to the server before calling copychunk_write Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 73/84] net: ethernet: stmmac: fix write to sgmii_adapter_base Greg Kroah-Hartman
` (15 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Duoming Zhou, Paolo Abeni, Sasha Levin
From: Duoming Zhou <duoming@zju.edu.cn>
[ Upstream commit bc6de2878429e85c1f1afaa566f7b5abb2243eef ]
There is a deadlock in rr_close(), which is shown below:
(Thread 1) | (Thread 2)
| rr_open()
rr_close() | add_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rr_timer()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold rrpriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need rrpriv->lock in position (2) of thread 2.
As a result, rr_close() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/hippi/rrunner.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
index a4b3fce69ecd..6016e182f008 100644
--- a/drivers/net/hippi/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
@@ -1346,7 +1346,9 @@ static int rr_close(struct net_device *dev)
rrpriv->fw_running = 0;
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
del_timer_sync(&rrpriv->timer);
+ spin_lock_irqsave(&rrpriv->lock, flags);
writel(0, ®s->TxPi);
writel(0, ®s->IpRxPi);
--
2.35.1
^ permalink raw reply related [flat|nested] 89+ messages in thread* [PATCH 5.4 73/84] net: ethernet: stmmac: fix write to sgmii_adapter_base
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 72/84] drivers: net: hippi: Fix deadlock in rr_close() Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 74/84] x86/cpu: Load microcode during restore_processor_state() Greg Kroah-Hartman
` (14 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dinh Nguyen, Jakub Kicinski
From: Dinh Nguyen <dinguyen@kernel.org>
commit 5fd1fe4807f91ea0cca043114d929faa11bd4190 upstream.
I made a mistake with the commit a6aaa0032424 ("net: ethernet: stmmac:
fix altr_tse_pcs function when using a fixed-link"). I should have
tested against both scenario of having a SGMII interface and one
without.
Without the SGMII PCS TSE adpater, the sgmii_adapter_base address is
NULL, thus a write to this address will fail.
Cc: stable@vger.kernel.org
Fixes: a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220420152345.27415-1-dinguyen@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -65,8 +65,9 @@ static void socfpga_dwmac_fix_mac_speed(
struct phy_device *phy_dev = ndev->phydev;
u32 val;
- writew(SGMII_ADAPTER_DISABLE,
- sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
+ if (sgmii_adapter_base)
+ writew(SGMII_ADAPTER_DISABLE,
+ sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
if (splitter_base) {
val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG);
@@ -88,10 +89,11 @@ static void socfpga_dwmac_fix_mac_speed(
writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG);
}
- writew(SGMII_ADAPTER_ENABLE,
- sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
- if (phy_dev)
+ if (phy_dev && sgmii_adapter_base) {
+ writew(SGMII_ADAPTER_ENABLE,
+ sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed);
+ }
}
static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 74/84] x86/cpu: Load microcode during restore_processor_state()
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 73/84] net: ethernet: stmmac: fix write to sgmii_adapter_base Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 75/84] tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2 Greg Kroah-Hartman
` (13 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kyle D. Pelton, Borislav Petkov, Pawan Gupta
From: Borislav Petkov <bp@suse.de>
commit f9e14dbbd454581061c736bf70bf5cbb15ac927c upstream.
When resuming from system sleep state, restore_processor_state()
restores the boot CPU MSRs. These MSRs could be emulated by microcode.
If microcode is not loaded yet, writing to emulated MSRs leads to
unchecked MSR access error:
...
PM: Calling lapic_suspend+0x0/0x210
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr)
Call Trace:
<TASK>
? restore_processor_state
x86_acpi_suspend_lowlevel
acpi_suspend_enter
suspend_devices_and_enter
pm_suspend.cold
state_store
kobj_attr_store
sysfs_kf_write
kernfs_fop_write_iter
new_sync_write
vfs_write
ksys_write
__x64_sys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
RIP: 0033:0x7fda13c260a7
To ensure microcode emulated MSRs are available for restoration, load
the microcode on the boot CPU before restoring these MSRs.
[ Pawan: write commit message and productize it. ]
Fixes: e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841
Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/microcode.h | 2 ++
arch/x86/kernel/cpu/microcode/core.c | 6 +++---
arch/x86/power/cpu.c | 8 ++++++++
3 files changed, 13 insertions(+), 3 deletions(-)
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -133,11 +133,13 @@ extern void load_ucode_ap(void);
void reload_early_microcode(void);
extern bool get_builtin_firmware(struct cpio_data *cd, const char *name);
extern bool initrd_gone;
+void microcode_bsp_resume(void);
#else
static inline int __init microcode_init(void) { return 0; };
static inline void __init load_ucode_bsp(void) { }
static inline void load_ucode_ap(void) { }
static inline void reload_early_microcode(void) { }
+static inline void microcode_bsp_resume(void) { }
static inline bool
get_builtin_firmware(struct cpio_data *cd, const char *name) { return false; }
#endif
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -772,9 +772,9 @@ static struct subsys_interface mc_cpu_in
};
/**
- * mc_bp_resume - Update boot CPU microcode during resume.
+ * microcode_bsp_resume - Update boot CPU microcode during resume.
*/
-static void mc_bp_resume(void)
+void microcode_bsp_resume(void)
{
int cpu = smp_processor_id();
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
@@ -786,7 +786,7 @@ static void mc_bp_resume(void)
}
static struct syscore_ops mc_syscore_ops = {
- .resume = mc_bp_resume,
+ .resume = microcode_bsp_resume,
};
static int mc_cpu_starting(unsigned int cpu)
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -25,6 +25,7 @@
#include <asm/cpu.h>
#include <asm/mmu_context.h>
#include <asm/cpu_device_id.h>
+#include <asm/microcode.h>
#ifdef CONFIG_X86_32
__visible unsigned long saved_context_ebx;
@@ -263,6 +264,13 @@ static void notrace __restore_processor_
x86_platform.restore_sched_clock_state();
mtrr_bp_restore();
perf_restore_debug_store();
+
+ microcode_bsp_resume();
+
+ /*
+ * This needs to happen after the microcode has been updated upon resume
+ * because some of the MSRs are "emulated" in microcode.
+ */
msr_restore_context(ctxt);
}
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 75/84] tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 74/84] x86/cpu: Load microcode during restore_processor_state() Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 76/84] tty: n_gsm: fix malformed counter for out of frame data Greg Kroah-Hartman
` (12 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: Daniel Starke <daniel.starke@siemens.com>
commit 06d5afd4d640eea67f5623e76cd5fc03359b7f3c upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.5.2 describes that the signal octet in
convergence layer type 2 can be either one or two bytes. The length is
encoded in the EA bit. This is set 1 for the last byte in the sequence.
gsmtty_modem_update() handles this correctly but gsm_dlci_data_output()
fails to set EA to 1. There is no case in which we encode two signal octets
as there is no case in which we send out a break signal.
Therefore, always set the EA bit to 1 for the signal octet to fix this.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -823,7 +823,7 @@ static int gsm_dlci_data_output(struct g
break;
case 2: /* Unstructed with modem bits.
Always one byte as we never send inline break data */
- *dp++ = gsm_encode_modem(dlci);
+ *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
break;
}
WARN_ON(kfifo_out_locked(dlci->fifo, dp , len, &dlci->lock) != len);
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 76/84] tty: n_gsm: fix malformed counter for out of frame data
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 75/84] tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2 Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 77/84] netfilter: nft_socket: only do sk lookups when indev is available Greg Kroah-Hartman
` (11 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: Daniel Starke <daniel.starke@siemens.com>
commit a24b4b2f660b7ddf3f484b37600bba382cb28a9d upstream.
The gsm_mux field 'malformed' represents the number of malformed frames
received. However, gsm1_receive() also increases this counter for any out
of frame byte.
Fix this by ignoring out of frame data for the malformed counter.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-7-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1961,7 +1961,8 @@ static void gsm1_receive(struct gsm_mux
}
/* Any partial frame was a runt so go back to start */
if (gsm->state != GSM_START) {
- gsm->malformed++;
+ if (gsm->state != GSM_SEARCH)
+ gsm->malformed++;
gsm->state = GSM_START;
}
/* A SOF in GSM_START means we are still reading idling or
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 77/84] netfilter: nft_socket: only do sk lookups when indev is available
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 76/84] tty: n_gsm: fix malformed counter for out of frame data Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:44 ` [PATCH 5.4 78/84] tty: n_gsm: fix insufficient txframe size Greg Kroah-Hartman
` (10 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Westphal, Pablo Neira Ayuso,
Topi Miettinen
From: Florian Westphal <fw@strlen.de>
commit 743b83f15d4069ea57c3e40996bf4a1077e0cdc1 upstream.
Check if the incoming interface is available and NFT_BREAK
in case neither skb->sk nor input device are set.
Because nf_sk_lookup_slow*() assume packet headers are in the
'in' direction, use in postrouting is not going to yield a meaningful
result. Same is true for the forward chain, so restrict the use
to prerouting, input and output.
Use in output work if a socket is already attached to the skb.
Fixes: 554ced0a6e29 ("netfilter: nf_tables: add support for native socket matching")
Reported-and-tested-by: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netfilter/nft_socket.c | 52 ++++++++++++++++++++++++++++++++-------------
1 file changed, 38 insertions(+), 14 deletions(-)
--- a/net/netfilter/nft_socket.c
+++ b/net/netfilter/nft_socket.c
@@ -14,6 +14,32 @@ struct nft_socket {
};
};
+static struct sock *nft_socket_do_lookup(const struct nft_pktinfo *pkt)
+{
+ const struct net_device *indev = nft_in(pkt);
+ const struct sk_buff *skb = pkt->skb;
+ struct sock *sk = NULL;
+
+ if (!indev)
+ return NULL;
+
+ switch (nft_pf(pkt)) {
+ case NFPROTO_IPV4:
+ sk = nf_sk_lookup_slow_v4(nft_net(pkt), skb, indev);
+ break;
+#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
+ case NFPROTO_IPV6:
+ sk = nf_sk_lookup_slow_v6(nft_net(pkt), skb, indev);
+ break;
+#endif
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
+
+ return sk;
+}
+
static void nft_socket_eval(const struct nft_expr *expr,
struct nft_regs *regs,
const struct nft_pktinfo *pkt)
@@ -27,20 +53,7 @@ static void nft_socket_eval(const struct
sk = NULL;
if (!sk)
- switch(nft_pf(pkt)) {
- case NFPROTO_IPV4:
- sk = nf_sk_lookup_slow_v4(nft_net(pkt), skb, nft_in(pkt));
- break;
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
- case NFPROTO_IPV6:
- sk = nf_sk_lookup_slow_v6(nft_net(pkt), skb, nft_in(pkt));
- break;
-#endif
- default:
- WARN_ON_ONCE(1);
- regs->verdict.code = NFT_BREAK;
- return;
- }
+ sk = nft_socket_do_lookup(pkt);
if (!sk) {
regs->verdict.code = NFT_BREAK;
@@ -123,6 +136,16 @@ static int nft_socket_dump(struct sk_buf
return 0;
}
+static int nft_socket_validate(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ return nft_chain_validate_hooks(ctx->chain,
+ (1 << NF_INET_PRE_ROUTING) |
+ (1 << NF_INET_LOCAL_IN) |
+ (1 << NF_INET_LOCAL_OUT));
+}
+
static struct nft_expr_type nft_socket_type;
static const struct nft_expr_ops nft_socket_ops = {
.type = &nft_socket_type,
@@ -130,6 +153,7 @@ static const struct nft_expr_ops nft_soc
.eval = nft_socket_eval,
.init = nft_socket_init,
.dump = nft_socket_dump,
+ .validate = nft_socket_validate,
};
static struct nft_expr_type nft_socket_type __read_mostly = {
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 78/84] tty: n_gsm: fix insufficient txframe size
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 77/84] netfilter: nft_socket: only do sk lookups when indev is available Greg Kroah-Hartman
@ 2022-05-04 16:44 ` Greg Kroah-Hartman
2022-05-04 16:45 ` [PATCH 5.4 79/84] tty: n_gsm: fix missing explicit ldisc flush Greg Kroah-Hartman
` (9 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:44 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: Daniel Starke <daniel.starke@siemens.com>
commit 535bf600de75a859698892ee873521a48d289ec1 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.2 states that the maximum frame size
(N1) refers to the length of the information field (i.e. user payload).
However, 'txframe' stores the whole frame including frame header, checksum
and start/end flags. We also need to consider the byte stuffing overhead.
Define constant for the protocol overhead and adjust the 'txframe' size
calculation accordingly to reserve enough space for a complete mux frame
including byte stuffing for advanced option mode. Note that no byte
stuffing is applied to the start and end flag.
Also use MAX_MTU instead of MAX_MRU as this buffer is used for data
transmission.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-8-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -72,6 +72,8 @@ module_param(debug, int, 0600);
*/
#define MAX_MRU 1500
#define MAX_MTU 1500
+/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */
+#define PROT_OVERHEAD 7
#define GSM_NET_TX_TIMEOUT (HZ*10)
/**
@@ -2209,7 +2211,7 @@ static struct gsm_mux *gsm_alloc_mux(voi
kfree(gsm);
return NULL;
}
- gsm->txframe = kmalloc(2 * MAX_MRU + 2, GFP_KERNEL);
+ gsm->txframe = kmalloc(2 * (MAX_MTU + PROT_OVERHEAD - 1), GFP_KERNEL);
if (gsm->txframe == NULL) {
kfree(gsm->buf);
kfree(gsm);
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 79/84] tty: n_gsm: fix missing explicit ldisc flush
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2022-05-04 16:44 ` [PATCH 5.4 78/84] tty: n_gsm: fix insufficient txframe size Greg Kroah-Hartman
@ 2022-05-04 16:45 ` Greg Kroah-Hartman
2022-05-04 16:45 ` [PATCH 5.4 80/84] tty: n_gsm: fix wrong command retry handling Greg Kroah-Hartman
` (8 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: Daniel Starke <daniel.starke@siemens.com>
commit 17eac652028501df7ea296b1d9b9c134db262b7d upstream.
In gsm_cleanup_mux() the muxer is closed down and all queues are removed.
However, removing the queues is done without explicit control of the
underlying buffers. Flush those before freeing up our queues to ensure
that all outgoing queues are cleared consistently. Otherwise, a new mux
connection establishment attempt may time out while the underlying tty is
still busy sending out the remaining data from the previous connection.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-10-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2101,6 +2101,7 @@ static void gsm_cleanup_mux(struct gsm_m
gsm_dlci_release(gsm->dlci[i]);
mutex_unlock(&gsm->mutex);
/* Now wipe the queues */
+ tty_ldisc_flush(gsm->tty);
list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
kfree(txq);
INIT_LIST_HEAD(&gsm->tx_list);
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 80/84] tty: n_gsm: fix wrong command retry handling
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2022-05-04 16:45 ` [PATCH 5.4 79/84] tty: n_gsm: fix missing explicit ldisc flush Greg Kroah-Hartman
@ 2022-05-04 16:45 ` Greg Kroah-Hartman
2022-05-04 16:45 ` [PATCH 5.4 81/84] tty: n_gsm: fix wrong command frame length field encoding Greg Kroah-Hartman
` (7 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: Daniel Starke <daniel.starke@siemens.com>
commit d0bcdffcad5a22f202e3bf37190c0dd8c080ea92 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.3 states that the valid range for the
maximum number of retransmissions (N2) is from 0 to 255 (both including).
gsm_config() fails to limit this range correctly. Furthermore,
gsm_control_retransmit() handles this number incorrectly by performing
N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255
retransmission attempts.
Fix the range check in gsm_config() and the value handling in
gsm_control_send() and gsm_control_retransmit() to comply with 3GPP 27.010.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-11-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1329,7 +1329,6 @@ static void gsm_control_retransmit(struc
spin_lock_irqsave(&gsm->control_lock, flags);
ctrl = gsm->pending_cmd;
if (ctrl) {
- gsm->cretries--;
if (gsm->cretries == 0) {
gsm->pending_cmd = NULL;
ctrl->error = -ETIMEDOUT;
@@ -1338,6 +1337,7 @@ static void gsm_control_retransmit(struc
wake_up(&gsm->event);
return;
}
+ gsm->cretries--;
gsm_control_transmit(gsm, ctrl);
mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
}
@@ -1378,7 +1378,7 @@ retry:
/* If DLCI0 is in ADM mode skip retries, it won't respond */
if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
- gsm->cretries = 1;
+ gsm->cretries = 0;
else
gsm->cretries = gsm->n2;
@@ -2268,7 +2268,7 @@ static int gsm_config(struct gsm_mux *gs
/* Check the MRU/MTU range looks sane */
if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
return -EINVAL;
- if (c->n2 < 3)
+ if (c->n2 > 255)
return -EINVAL;
if (c->encapsulation > 1) /* Basic, advanced, no I */
return -EINVAL;
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 81/84] tty: n_gsm: fix wrong command frame length field encoding
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2022-05-04 16:45 ` [PATCH 5.4 80/84] tty: n_gsm: fix wrong command retry handling Greg Kroah-Hartman
@ 2022-05-04 16:45 ` Greg Kroah-Hartman
2022-05-04 16:45 ` [PATCH 5.4 82/84] tty: n_gsm: fix incorrect UA handling Greg Kroah-Hartman
` (6 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: Daniel Starke <daniel.starke@siemens.com>
commit 398867f59f956985f4c324f173eff7b946e14bd8 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.1 states that each command frame shall
be made up from type, length and value. Looking for example in chapter
5.4.6.3.5 at the description for the encoding of a flow control on command
it becomes obvious, that the type and length field is always present
whereas the value may be zero bytes long. The current implementation omits
the length field if the value is not present. This is wrong.
Correct this by always sending the length in gsm_control_transmit().
So far only the modem status command (MSC) has included a value and encoded
its length directly. Therefore, also change gsmtty_modem_update().
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-12-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1302,11 +1302,12 @@ static void gsm_control_response(struct
static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
{
- struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype);
+ struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 2, gsm->ftype);
if (msg == NULL)
return;
- msg->data[0] = (ctrl->cmd << 1) | 2 | EA; /* command */
- memcpy(msg->data + 1, ctrl->data, ctrl->len);
+ msg->data[0] = (ctrl->cmd << 1) | CR | EA; /* command */
+ msg->data[1] = (ctrl->len << 1) | EA;
+ memcpy(msg->data + 2, ctrl->data, ctrl->len);
gsm_data_queue(gsm->dlci[0], msg);
}
@@ -2883,19 +2884,17 @@ static struct tty_ldisc_ops tty_ldisc_pa
static int gsmtty_modem_update(struct gsm_dlci *dlci, u8 brk)
{
- u8 modembits[5];
+ u8 modembits[3];
struct gsm_control *ctrl;
int len = 2;
- if (brk)
+ modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */
+ modembits[1] = (gsm_encode_modem(dlci) << 1) | EA;
+ if (brk) {
+ modembits[2] = (brk << 4) | 2 | EA; /* Length, Break, EA */
len++;
-
- modembits[0] = len << 1 | EA; /* Data bytes */
- modembits[1] = dlci->addr << 2 | 3; /* DLCI, EA, 1 */
- modembits[2] = gsm_encode_modem(dlci) << 1 | EA;
- if (brk)
- modembits[3] = brk << 4 | 2 | EA; /* Valid, EA */
- ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len + 1);
+ }
+ ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len);
if (ctrl == NULL)
return -ENOMEM;
return gsm_control_wait(dlci->gsm, ctrl);
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 82/84] tty: n_gsm: fix incorrect UA handling
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2022-05-04 16:45 ` [PATCH 5.4 81/84] tty: n_gsm: fix wrong command frame length field encoding Greg Kroah-Hartman
@ 2022-05-04 16:45 ` Greg Kroah-Hartman
2022-05-04 16:45 ` [PATCH 5.4 83/84] hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs Greg Kroah-Hartman
` (5 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:45 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniel Starke
From: Daniel Starke <daniel.starke@siemens.com>
commit ff9166c623704337bd6fe66fce2838d9768a6634 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.4.2 states that any received unnumbered
acknowledgment (UA) with its poll/final (PF) bit set to 0 shall be
discarded. Currently, all UA frame are handled in the same way regardless
of the PF bit. This does not comply with the standard.
Remove the UA case in gsm_queue() to process only UA frames with PF bit set
to 1 to abide the standard.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-20-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/n_gsm.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1813,7 +1813,6 @@ static void gsm_queue(struct gsm_mux *gs
gsm_response(gsm, address, UA);
gsm_dlci_close(dlci);
break;
- case UA:
case UA|PF:
if (cr == 0 || dlci == NULL)
break;
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 83/84] hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2022-05-04 16:45 ` [PATCH 5.4 82/84] tty: n_gsm: fix incorrect UA handling Greg Kroah-Hartman
@ 2022-05-04 16:45 ` Greg Kroah-Hartman
2022-05-04 16:45 ` [PATCH 5.4 84/84] mm, hugetlb: allow for "high" userspace addresses Greg Kroah-Hartman
` (4 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, kbuild test robot, Shijie Hu,
Mike Kravetz, Andrew Morton, Will Deacon, Xiaoming Ni,
Kefeng Wang, yangerkun, ChenGang, Chen Jie, Linus Torvalds,
Christophe Leroy
From: Shijie Hu <hushijie3@huawei.com>
commit 885902531586d5a20a74099c1357bfdc982befe3 upstream.
In a 32-bit program, running on arm64 architecture. When the address
space below mmap base is completely exhausted, shmat() for huge pages will
return ENOMEM, but shmat() for normal pages can still success on no-legacy
mode. This seems not fair.
For normal pages, the calling trace of get_unmapped_area() is:
=> mm->get_unmapped_area()
if on legacy mode,
=> arch_get_unmapped_area()
=> vm_unmapped_area()
if on no-legacy mode,
=> arch_get_unmapped_area_topdown()
=> vm_unmapped_area()
For huge pages, the calling trace of get_unmapped_area() is:
=> file->f_op->get_unmapped_area()
=> hugetlb_get_unmapped_area()
=> vm_unmapped_area()
To solve this issue, we only need to make hugetlb_get_unmapped_area() take
the same way as mm->get_unmapped_area(). Add *bottomup() and *topdown()
for hugetlbfs, and check current mm->get_unmapped_area() to decide which
one to use. If mm->get_unmapped_area is equal to
arch_get_unmapped_area_topdown(), hugetlb_get_unmapped_area() calls
topdown routine, otherwise calls bottomup routine.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shijie Hu <hushijie3@huawei.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Will Deacon <will@kernel.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: yangerkun <yangerkun@huawei.com>
Cc: ChenGang <cg.chen@huawei.com>
Cc: Chen Jie <chenjie6@huawei.com>
Link: http://lkml.kernel.org/r/20200518065338.113664-1-hushijie3@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/hugetlbfs/inode.c | 67 ++++++++++++++++++++++++++++++++++++++++++++-------
1 file changed, 59 insertions(+), 8 deletions(-)
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -38,6 +38,7 @@
#include <linux/uio.h>
#include <linux/uaccess.h>
+#include <linux/sched/mm.h>
static const struct super_operations hugetlbfs_ops;
static const struct address_space_operations hugetlbfs_aops;
@@ -201,13 +202,60 @@ out:
#ifndef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
static unsigned long
+hugetlb_get_unmapped_area_bottomup(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct hstate *h = hstate_file(file);
+ struct vm_unmapped_area_info info;
+
+ info.flags = 0;
+ info.length = len;
+ info.low_limit = current->mm->mmap_base;
+ info.high_limit = TASK_SIZE;
+ info.align_mask = PAGE_MASK & ~huge_page_mask(h);
+ info.align_offset = 0;
+ return vm_unmapped_area(&info);
+}
+
+static unsigned long
+hugetlb_get_unmapped_area_topdown(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct hstate *h = hstate_file(file);
+ struct vm_unmapped_area_info info;
+
+ info.flags = VM_UNMAPPED_AREA_TOPDOWN;
+ info.length = len;
+ info.low_limit = max(PAGE_SIZE, mmap_min_addr);
+ info.high_limit = current->mm->mmap_base;
+ info.align_mask = PAGE_MASK & ~huge_page_mask(h);
+ info.align_offset = 0;
+ addr = vm_unmapped_area(&info);
+
+ /*
+ * A failed mmap() very likely causes application failure,
+ * so fall back to the bottom-up function here. This scenario
+ * can happen with large stack limits and large mmap()
+ * allocations.
+ */
+ if (unlikely(offset_in_page(addr))) {
+ VM_BUG_ON(addr != -ENOMEM);
+ info.flags = 0;
+ info.low_limit = current->mm->mmap_base;
+ info.high_limit = TASK_SIZE;
+ addr = vm_unmapped_area(&info);
+ }
+
+ return addr;
+}
+
+static unsigned long
hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
unsigned long len, unsigned long pgoff, unsigned long flags)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
struct hstate *h = hstate_file(file);
- struct vm_unmapped_area_info info;
if (len & ~huge_page_mask(h))
return -EINVAL;
@@ -228,13 +276,16 @@ hugetlb_get_unmapped_area(struct file *f
return addr;
}
- info.flags = 0;
- info.length = len;
- info.low_limit = TASK_UNMAPPED_BASE;
- info.high_limit = TASK_SIZE;
- info.align_mask = PAGE_MASK & ~huge_page_mask(h);
- info.align_offset = 0;
- return vm_unmapped_area(&info);
+ /*
+ * Use mm->get_unmapped_area value as a hint to use topdown routine.
+ * If architectures have special needs, they should define their own
+ * version of hugetlb_get_unmapped_area.
+ */
+ if (mm->get_unmapped_area == arch_get_unmapped_area_topdown)
+ return hugetlb_get_unmapped_area_topdown(file, addr, len,
+ pgoff, flags);
+ return hugetlb_get_unmapped_area_bottomup(file, addr, len,
+ pgoff, flags);
}
#endif
^ permalink raw reply [flat|nested] 89+ messages in thread* [PATCH 5.4 84/84] mm, hugetlb: allow for "high" userspace addresses
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2022-05-04 16:45 ` [PATCH 5.4 83/84] hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs Greg Kroah-Hartman
@ 2022-05-04 16:45 ` Greg Kroah-Hartman
2022-05-05 0:53 ` [PATCH 5.4 00/84] 5.4.192-rc1 review Samuel Zou
` (3 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Greg Kroah-Hartman @ 2022-05-04 16:45 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Catalin Marinas,
Steve Capper, Will Deacon, Andrew Morton, Linus Torvalds
From: Christophe Leroy <christophe.leroy@csgroup.eu>
commit 5f24d5a579d1eace79d505b148808a850b417d4c upstream.
This is a fix for commit f6795053dac8 ("mm: mmap: Allow for "high"
userspace addresses") for hugetlb.
This patch adds support for "high" userspace addresses that are
optionally supported on the system and have to be requested via a hint
mechanism ("high" addr parameter to mmap).
Architectures such as powerpc and x86 achieve this by making changes to
their architectural versions of hugetlb_get_unmapped_area() function.
However, arm64 uses the generic version of that function.
So take into account arch_get_mmap_base() and arch_get_mmap_end() in
hugetlb_get_unmapped_area(). To allow that, move those two macros out
of mm/mmap.c into include/linux/sched/mm.h
If these macros are not defined in architectural code then they default
to (TASK_SIZE) and (base) so should not introduce any behavioural
changes to architectures that do not define them.
For the time being, only ARM64 is affected by this change.
Catalin (ARM64) said
"We should have fixed hugetlb_get_unmapped_area() as well when we added
support for 52-bit VA. The reason for commit f6795053dac8 was to
prevent normal mmap() from returning addresses above 48-bit by default
as some user-space had hard assumptions about this.
It's a slight ABI change if you do this for hugetlb_get_unmapped_area()
but I doubt anyone would notice. It's more likely that the current
behaviour would cause issues, so I'd rather have them consistent.
Basically when arm64 gained support for 52-bit addresses we did not
want user-space calling mmap() to suddenly get such high addresses,
otherwise we could have inadvertently broken some programs (similar
behaviour to x86 here). Hence we added commit f6795053dac8. But we
missed hugetlbfs which could still get such high mmap() addresses. So
in theory that's a potential regression that should have bee addressed
at the same time as commit f6795053dac8 (and before arm64 enabled
52-bit addresses)"
Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu
Fixes: f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> [5.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/hugetlbfs/inode.c | 9 +++++----
include/linux/sched/mm.h | 8 ++++++++
mm/mmap.c | 8 --------
3 files changed, 13 insertions(+), 12 deletions(-)
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -211,7 +211,7 @@ hugetlb_get_unmapped_area_bottomup(struc
info.flags = 0;
info.length = len;
info.low_limit = current->mm->mmap_base;
- info.high_limit = TASK_SIZE;
+ info.high_limit = arch_get_mmap_end(addr);
info.align_mask = PAGE_MASK & ~huge_page_mask(h);
info.align_offset = 0;
return vm_unmapped_area(&info);
@@ -227,7 +227,7 @@ hugetlb_get_unmapped_area_topdown(struct
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
info.low_limit = max(PAGE_SIZE, mmap_min_addr);
- info.high_limit = current->mm->mmap_base;
+ info.high_limit = arch_get_mmap_base(addr, current->mm->mmap_base);
info.align_mask = PAGE_MASK & ~huge_page_mask(h);
info.align_offset = 0;
addr = vm_unmapped_area(&info);
@@ -242,7 +242,7 @@ hugetlb_get_unmapped_area_topdown(struct
VM_BUG_ON(addr != -ENOMEM);
info.flags = 0;
info.low_limit = current->mm->mmap_base;
- info.high_limit = TASK_SIZE;
+ info.high_limit = arch_get_mmap_end(addr);
addr = vm_unmapped_area(&info);
}
@@ -256,6 +256,7 @@ hugetlb_get_unmapped_area(struct file *f
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
struct hstate *h = hstate_file(file);
+ const unsigned long mmap_end = arch_get_mmap_end(addr);
if (len & ~huge_page_mask(h))
return -EINVAL;
@@ -271,7 +272,7 @@ hugetlb_get_unmapped_area(struct file *f
if (addr) {
addr = ALIGN(addr, huge_page_size(h));
vma = find_vma(mm, addr);
- if (TASK_SIZE - len >= addr &&
+ if (mmap_end - len >= addr &&
(!vma || addr + len <= vm_start_gap(vma)))
return addr;
}
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -133,6 +133,14 @@ static inline void mm_update_next_owner(
#endif /* CONFIG_MEMCG */
#ifdef CONFIG_MMU
+#ifndef arch_get_mmap_end
+#define arch_get_mmap_end(addr) (TASK_SIZE)
+#endif
+
+#ifndef arch_get_mmap_base
+#define arch_get_mmap_base(addr, base) (base)
+#endif
+
extern void arch_pick_mmap_layout(struct mm_struct *mm,
struct rlimit *rlim_stack);
extern unsigned long
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2077,14 +2077,6 @@ found_highest:
}
-#ifndef arch_get_mmap_end
-#define arch_get_mmap_end(addr) (TASK_SIZE)
-#endif
-
-#ifndef arch_get_mmap_base
-#define arch_get_mmap_base(addr, base) (base)
-#endif
-
/* Get an address range which is currently unmapped.
* For shmat() with addr=0.
*
^ permalink raw reply [flat|nested] 89+ messages in thread* Re: [PATCH 5.4 00/84] 5.4.192-rc1 review
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2022-05-04 16:45 ` [PATCH 5.4 84/84] mm, hugetlb: allow for "high" userspace addresses Greg Kroah-Hartman
@ 2022-05-05 0:53 ` Samuel Zou
2022-05-05 3:09 ` Florian Fainelli
` (2 subsequent siblings)
87 siblings, 0 replies; 89+ messages in thread
From: Samuel Zou @ 2022-05-05 0:53 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, sudipm.mukherjee, slade
On 2022/5/5 0:43, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.192 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 06 May 2022 15:25:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.192-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 5.4.192-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.192-rc1
Commit: bea55d0a1d975bbc086c3c870de090b9c29b60c5
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9030
passed: 9030
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9030
passed: 9030
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <hulkrobot@huawei.com>
^ permalink raw reply [flat|nested] 89+ messages in thread* Re: [PATCH 5.4 00/84] 5.4.192-rc1 review
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2022-05-05 0:53 ` [PATCH 5.4 00/84] 5.4.192-rc1 review Samuel Zou
@ 2022-05-05 3:09 ` Florian Fainelli
2022-05-05 12:37 ` Naresh Kamboju
2022-05-05 21:41 ` Guenter Roeck
87 siblings, 0 replies; 89+ messages in thread
From: Florian Fainelli @ 2022-05-05 3:09 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage,
pavel, jonathanh, sudipm.mukherjee, slade
On 5/4/2022 9:43 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.192 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 06 May 2022 15:25:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.192-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
^ permalink raw reply [flat|nested] 89+ messages in thread* Re: [PATCH 5.4 00/84] 5.4.192-rc1 review
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2022-05-05 3:09 ` Florian Fainelli
@ 2022-05-05 12:37 ` Naresh Kamboju
2022-05-05 21:41 ` Guenter Roeck
87 siblings, 0 replies; 89+ messages in thread
From: Naresh Kamboju @ 2022-05-05 12:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade
On Wed, 4 May 2022 at 22:18, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.192 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 06 May 2022 15:25:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.192-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Build
* kernel: 5.4.192-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: a4a4cbb413802e07ea4b9e45236bd75e241dd4ca
* git describe: v5.4.191-85-ga4a4cbb41380
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.191-85-ga4a4cbb41380
## Test Regressions (compared to v5.4.191-74-g65a8a6ba51b6)
No test regressions found.
## Metric Regressions (compared to v5.4.191-74-g65a8a6ba51b6)
No metric regressions found.
## Test Fixes (compared to v5.4.191-74-g65a8a6ba51b6)
No test fixes found.
## Metric Fixes (compared to v5.4.191-74-g65a8a6ba51b6)
No metric fixes found.
## Test result summary
total: 89238, pass: 74202, fail: 874, skip: 12971, xfail: 1191
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 290 total, 290 passed, 0 failed
* arm64: 40 total, 34 passed, 6 failed
* i386: 19 total, 19 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 60 total, 54 passed, 6 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 40 total, 40 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 89+ messages in thread* Re: [PATCH 5.4 00/84] 5.4.192-rc1 review
2022-05-04 16:43 [PATCH 5.4 00/84] 5.4.192-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2022-05-05 12:37 ` Naresh Kamboju
@ 2022-05-05 21:41 ` Guenter Roeck
87 siblings, 0 replies; 89+ messages in thread
From: Guenter Roeck @ 2022-05-05 21:41 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade
On Wed, May 04, 2022 at 06:43:41PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.192 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 06 May 2022 15:25:19 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 159 pass: 159 fail: 0
Qemu test results:
total: 449 pass: 449 fail: 0
Guenter
^ permalink raw reply [flat|nested] 89+ messages in thread