* linux-next: build warnings after merge of the hwmon-staging tree
@ 2022-06-07 4:19 Stephen Rothwell
2022-06-07 9:37 ` Bagas Sanjaya
0 siblings, 1 reply; 10+ messages in thread
From: Stephen Rothwell @ 2022-06-07 4:19 UTC (permalink / raw)
To: Guenter Roeck; +Cc: Linux Kernel Mailing List, Linux Next Mailing List
[-- Attachment #1: Type: text/plain, Size: 2674 bytes --]
Hi all,
After merging the hwmon-staging tree, today's linux-next build (htmldocs)
produced these warnings:
Documentation/hwmon/lt7182s.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Documentation/hwmon/lt7182s.rst:75: WARNING: Malformed table.
Text in column margin in table line 33.
====================== ====================================
curr[1-2]_label "iin[12]"
curr[1-2]_input Measured input current
curr[1-2]_max Maximum input current
curr[1-2]_max_alarm Current high alarm
curr[3-4]_label "iout[1-2]"
curr[3-4]_input Measured output current
curr[3-4]_highest Highest measured output current
curr[3-4]_max Maximum output current
curr[3-4]_max_alarm Output current high alarm
in[1-2]_label "vin[12]"
in[1-2]_input Measured input voltage
in[1-2]_highest Highest measured input voltage
in[1-2]_crit Critical maximum input voltage
in[1-2]_crit_alarm Input voltage critical high alarm
in[1-2]_min Minimum input voltage
in[1-2]_min_alarm Input voltage low alarm
in[1-2]_rated_min Rated minimum input voltage
in[1-2]_rated_max Rated maximum input voltage
in1_reset_history Write to reset history for all attributes
in[3-5]_label "vmon[1-3]"
in[3-5]_input Measured voltage on ITH1/ITH2/EXTVCC pins
Only available if enabled with MFR_ADC_CONTROL_LT7182S
command.
in[3-4|6-7]_label "vout[1-2]"
in[3-4|6-7]_input Measured output voltage
in[3-4|6-7]_highest Highest measured output voltage
in[3-4|6-7]_lcrit Critical minimum output voltage
in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
in[3-4|6-7]_min Minimum output voltage
in[3-4|6-7]_max_alarm Output voltage low alarm
in[3-4|6-7]_max Maximum output voltage
in[3-4|6-7]_max_alarm Output voltage high alarm
in[3-4|6-7]_crit Critical maximum output voltage
in[3-4|6-7]_crit_alarm Output voltage critical high alarm
power[1-2]_label "pout[1-2]"
power[1-2]_input Measured output power
temp1_input Measured temperature
temp1_crit Critical high temperature
temp1_crit_alarm Chip temperature critical high alarm
temp1_max Maximum temperature
temp1_max_alarm Chip temperature high alarm
====================== ====================================
Introduced by commit
3d6bcaa21fbd ("hwmon: (pmbus) Add support for Analog Devices LT7182S")
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: linux-next: build warnings after merge of the hwmon-staging tree
2022-06-07 4:19 linux-next: build warnings after merge of the hwmon-staging tree Stephen Rothwell
@ 2022-06-07 9:37 ` Bagas Sanjaya
2022-06-07 12:40 ` Guenter Roeck
0 siblings, 1 reply; 10+ messages in thread
From: Bagas Sanjaya @ 2022-06-07 9:37 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Guenter Roeck, Linux Kernel Mailing List,
Linux Next Mailing List, linux-doc
On Tue, Jun 07, 2022 at 02:19:58PM +1000, Stephen Rothwell wrote:
> Hi all,
>
> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
> produced these warnings:
>
> Documentation/hwmon/lt7182s.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
> Documentation/hwmon/lt7182s.rst:75: WARNING: Malformed table.
> Text in column margin in table line 33.
>
> ====================== ====================================
> curr[1-2]_label "iin[12]"
> curr[1-2]_input Measured input current
> curr[1-2]_max Maximum input current
> curr[1-2]_max_alarm Current high alarm
>
> curr[3-4]_label "iout[1-2]"
> curr[3-4]_input Measured output current
> curr[3-4]_highest Highest measured output current
> curr[3-4]_max Maximum output current
> curr[3-4]_max_alarm Output current high alarm
>
> in[1-2]_label "vin[12]"
> in[1-2]_input Measured input voltage
> in[1-2]_highest Highest measured input voltage
> in[1-2]_crit Critical maximum input voltage
> in[1-2]_crit_alarm Input voltage critical high alarm
> in[1-2]_min Minimum input voltage
> in[1-2]_min_alarm Input voltage low alarm
> in[1-2]_rated_min Rated minimum input voltage
> in[1-2]_rated_max Rated maximum input voltage
> in1_reset_history Write to reset history for all attributes
>
> in[3-5]_label "vmon[1-3]"
> in[3-5]_input Measured voltage on ITH1/ITH2/EXTVCC pins
> Only available if enabled with MFR_ADC_CONTROL_LT7182S
> command.
>
> in[3-4|6-7]_label "vout[1-2]"
> in[3-4|6-7]_input Measured output voltage
> in[3-4|6-7]_highest Highest measured output voltage
> in[3-4|6-7]_lcrit Critical minimum output voltage
> in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
> in[3-4|6-7]_min Minimum output voltage
> in[3-4|6-7]_max_alarm Output voltage low alarm
> in[3-4|6-7]_max Maximum output voltage
> in[3-4|6-7]_max_alarm Output voltage high alarm
> in[3-4|6-7]_crit Critical maximum output voltage
> in[3-4|6-7]_crit_alarm Output voltage critical high alarm
>
> power[1-2]_label "pout[1-2]"
> power[1-2]_input Measured output power
>
> temp1_input Measured temperature
> temp1_crit Critical high temperature
> temp1_crit_alarm Chip temperature critical high alarm
> temp1_max Maximum temperature
> temp1_max_alarm Chip temperature high alarm
> ====================== ====================================
>
> Introduced by commit
>
> 3d6bcaa21fbd ("hwmon: (pmbus) Add support for Analog Devices LT7182S")
>
Hi Stephen,
The warning above doesn't appear when doing htmldocs build using Sphinx
installed from pip on my system.
Cc-ing linux-doc list.
--
An old man doll... just what I always wanted! - Clara
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: linux-next: build warnings after merge of the hwmon-staging tree
2022-06-07 9:37 ` Bagas Sanjaya
@ 2022-06-07 12:40 ` Guenter Roeck
0 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2022-06-07 12:40 UTC (permalink / raw)
To: Bagas Sanjaya, Stephen Rothwell
Cc: Linux Kernel Mailing List, Linux Next Mailing List, linux-doc
On 6/7/22 02:37, Bagas Sanjaya wrote:
> On Tue, Jun 07, 2022 at 02:19:58PM +1000, Stephen Rothwell wrote:
>> Hi all,
>>
>> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
>> produced these warnings:
>>
>> Documentation/hwmon/lt7182s.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
>> Documentation/hwmon/lt7182s.rst:75: WARNING: Malformed table.
>> Text in column margin in table line 33.
>>
>> ====================== ====================================
>> curr[1-2]_label "iin[12]"
>> curr[1-2]_input Measured input current
>> curr[1-2]_max Maximum input current
>> curr[1-2]_max_alarm Current high alarm
>>
>> curr[3-4]_label "iout[1-2]"
>> curr[3-4]_input Measured output current
>> curr[3-4]_highest Highest measured output current
>> curr[3-4]_max Maximum output current
>> curr[3-4]_max_alarm Output current high alarm
>>
>> in[1-2]_label "vin[12]"
>> in[1-2]_input Measured input voltage
>> in[1-2]_highest Highest measured input voltage
>> in[1-2]_crit Critical maximum input voltage
>> in[1-2]_crit_alarm Input voltage critical high alarm
>> in[1-2]_min Minimum input voltage
>> in[1-2]_min_alarm Input voltage low alarm
>> in[1-2]_rated_min Rated minimum input voltage
>> in[1-2]_rated_max Rated maximum input voltage
>> in1_reset_history Write to reset history for all attributes
>>
>> in[3-5]_label "vmon[1-3]"
>> in[3-5]_input Measured voltage on ITH1/ITH2/EXTVCC pins
>> Only available if enabled with MFR_ADC_CONTROL_LT7182S
>> command.
>>
>> in[3-4|6-7]_label "vout[1-2]"
>> in[3-4|6-7]_input Measured output voltage
>> in[3-4|6-7]_highest Highest measured output voltage
>> in[3-4|6-7]_lcrit Critical minimum output voltage
>> in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
^
>> in[3-4|6-7]_min Minimum output voltage
>> in[3-4|6-7]_max_alarm Output voltage low alarm
>> in[3-4|6-7]_max Maximum output voltage
>> in[3-4|6-7]_max_alarm Output voltage high alarm
>> in[3-4|6-7]_crit Critical maximum output voltage
>> in[3-4|6-7]_crit_alarm Output voltage critical high alarm
>>
>> power[1-2]_label "pout[1-2]"
>> power[1-2]_input Measured output power
>>
>> temp1_input Measured temperature
>> temp1_crit Critical high temperature
>> temp1_crit_alarm Chip temperature critical high alarm
>> temp1_max Maximum temperature
>> temp1_max_alarm Chip temperature high alarm
>> ====================== ====================================
>>
>> Introduced by commit
>>
>> 3d6bcaa21fbd ("hwmon: (pmbus) Add support for Analog Devices LT7182S")
>>
>
> Hi Stephen,
>
> The warning above doesn't appear when doing htmldocs build using Sphinx
> installed from pip on my system.
>
I already fixed it up.
Guenter
^ permalink raw reply [flat|nested] 10+ messages in thread
* linux-next: build warnings after merge of the hwmon-staging tree
@ 2024-02-04 23:41 Stephen Rothwell
2024-02-05 0:04 ` Guenter Roeck
0 siblings, 1 reply; 10+ messages in thread
From: Stephen Rothwell @ 2024-02-04 23:41 UTC (permalink / raw)
To: Guenter Roeck
Cc: Charles Hsu, Linux Kernel Mailing List, Linux Next Mailing List
[-- Attachment #1: Type: text/plain, Size: 491 bytes --]
Hi all,
After merging the hwmon-staging tree, today's linux-next build (x86_64
allmodconfig) produced these warnings:
WARNING: modpost: module mpq8785 uses symbol pmbus_do_probe from namespace PMBUS, but does not import it.
WARNING: modpost: module mpq8785 uses symbol pmbus_read_byte_data from namespace PMBUS, but does not import it.
Introduced by commit
7dd62e578cb4 ("hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter")
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 484 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: linux-next: build warnings after merge of the hwmon-staging tree
2024-02-04 23:41 Stephen Rothwell
@ 2024-02-05 0:04 ` Guenter Roeck
0 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2024-02-05 0:04 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Charles Hsu, Linux Kernel Mailing List, Linux Next Mailing List
On 2/4/24 15:41, Stephen Rothwell wrote:
> Hi all,
>
> After merging the hwmon-staging tree, today's linux-next build (x86_64
> allmodconfig) produced these warnings:
>
> WARNING: modpost: module mpq8785 uses symbol pmbus_do_probe from namespace PMBUS, but does not import it.
> WARNING: modpost: module mpq8785 uses symbol pmbus_read_byte_data from namespace PMBUS, but does not import it.
>
> Introduced by commit
>
> 7dd62e578cb4 ("hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter")
>
Now fixed up.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 10+ messages in thread
* linux-next: build warnings after merge of the hwmon-staging tree
@ 2022-06-07 4:23 Stephen Rothwell
2022-06-07 9:35 ` Bagas Sanjaya
0 siblings, 1 reply; 10+ messages in thread
From: Stephen Rothwell @ 2022-06-07 4:23 UTC (permalink / raw)
To: Guenter Roeck; +Cc: Linux Kernel Mailing List, Linux Next Mailing List
[-- Attachment #1: Type: text/plain, Size: 441 bytes --]
Hi all,
After merging the hwmon-staging tree, today's linux-next build (htmldocs)
produced these warnings:
Documentation/hwmon/lm90.rst:493: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/hwmon/lm90.rst:494: WARNING: Bullet list ends without a blank line; unexpected unindent.
Introduced by commit
7dd47c2603aa ("hwmon: (lm90) Support MAX1617 and LM84")
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: linux-next: build warnings after merge of the hwmon-staging tree
2022-06-07 4:23 Stephen Rothwell
@ 2022-06-07 9:35 ` Bagas Sanjaya
2022-06-07 12:39 ` Guenter Roeck
0 siblings, 1 reply; 10+ messages in thread
From: Bagas Sanjaya @ 2022-06-07 9:35 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Guenter Roeck, Linux Kernel Mailing List,
Linux Next Mailing List, linux-doc
On Tue, Jun 07, 2022 at 02:23:01PM +1000, Stephen Rothwell wrote:
> Hi all,
>
> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
> produced these warnings:
>
> Documentation/hwmon/lm90.rst:493: WARNING: Bullet list ends without a blank line; unexpected unindent.
> Documentation/hwmon/lm90.rst:494: WARNING: Bullet list ends without a blank line; unexpected unindent.
>
> Introduced by commit
>
> 7dd47c2603aa ("hwmon: (lm90) Support MAX1617 and LM84")
>
Hi Stephen,
These warnings above doesn't appear when doing htmldocs build using
Sphinx installed from pip on my system.
Cc-ing linux-doc list.
Thanks.
--
An old man doll... just what I always wanted! - Clara
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: linux-next: build warnings after merge of the hwmon-staging tree
2022-06-07 9:35 ` Bagas Sanjaya
@ 2022-06-07 12:39 ` Guenter Roeck
0 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2022-06-07 12:39 UTC (permalink / raw)
To: Bagas Sanjaya, Stephen Rothwell
Cc: Linux Kernel Mailing List, Linux Next Mailing List, linux-doc
On 6/7/22 02:35, Bagas Sanjaya wrote:
> On Tue, Jun 07, 2022 at 02:23:01PM +1000, Stephen Rothwell wrote:
>> Hi all,
>>
>> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
>> produced these warnings:
>>
>> Documentation/hwmon/lm90.rst:493: WARNING: Bullet list ends without a blank line; unexpected unindent.
>> Documentation/hwmon/lm90.rst:494: WARNING: Bullet list ends without a blank line; unexpected unindent.
>>
>> Introduced by commit
>>
>> 7dd47c2603aa ("hwmon: (lm90) Support MAX1617 and LM84")
>>
>
> Hi Stephen,
>
> These warnings above doesn't appear when doing htmldocs build using
> Sphinx installed from pip on my system.
>
That is possibly because I already fixed it up (in one place a '-'
instead of '*' had slipped in).
Guenter
^ permalink raw reply [flat|nested] 10+ messages in thread
* linux-next: build warnings after merge of the hwmon-staging tree
@ 2021-11-24 5:22 Stephen Rothwell
0 siblings, 0 replies; 10+ messages in thread
From: Stephen Rothwell @ 2021-11-24 5:22 UTC (permalink / raw)
To: Guenter Roeck
Cc: Denis Pauk, Ed Brindley, Linux Kernel Mailing List,
Linux Next Mailing List
[-- Attachment #1: Type: text/plain, Size: 516 bytes --]
Hi all,
After merging the hwmon-staging tree, today's linux-next build (htmldocs)
produced these warnings:
Documentation/hwmon/asus_wmi_sensors.rst:33: WARNING: Unexpected indentation.
Documentation/hwmon/asus_wmi_sensors.rst:68: WARNING: Unexpected indentation.
Documentation/hwmon/asus_wmi_sensors.rst:76: WARNING: Block quote ends without a blank line; unexpected unindent.
Introduced by commit
9d07e54a25b8 ("hwmon: (asus_wmi_sensors) Support X370 Asus WMI.")
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* linux-next: build warnings after merge of the hwmon-staging tree
@ 2019-06-06 0:32 Stephen Rothwell
0 siblings, 0 replies; 10+ messages in thread
From: Stephen Rothwell @ 2019-06-06 0:32 UTC (permalink / raw)
To: Guenter Roeck
Cc: Linux Next Mailing List, Linux Kernel Mailing List, amy.shih,
Gustavo A. R. Silva, Kees Cook
[-- Attachment #1: Type: text/plain, Size: 1416 bytes --]
Hi all,
After merging the hwmon-staging tree, today's linux-next build (x86_64
allmodconfig) produced this warning:
drivers/hwmon/nct7904.c: In function 'nct7904_in_is_visible':
drivers/hwmon/nct7904.c:313:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (channel > 0 && (data->vsen_mask & BIT(index)))
^
drivers/hwmon/nct7904.c:315:2: note: here
case hwmon_in_min:
^~~~
drivers/hwmon/nct7904.c: In function 'nct7904_fan_is_visible':
drivers/hwmon/nct7904.c:230:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (data->fanin_mask & (1 << channel))
^
drivers/hwmon/nct7904.c:232:2: note: here
case hwmon_fan_min:
^~~~
drivers/hwmon/nct7904.c: In function 'nct7904_temp_is_visible':
drivers/hwmon/nct7904.c:443:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (channel < 5) {
^
drivers/hwmon/nct7904.c:450:2: note: here
case hwmon_temp_max:
^~~~
Introduced by commit
af55ab0b0792 ("hwmon: (nct7904) Add extra sysfs support for fan, voltage and temperature.")
I get these warnings because I am building with -Wimplicit-fallthrough
in attempt to catch new additions early. The gcc warning can be turned
off by adding a /* fall through */ comment at the point the fall through
happens (assuming that the fall through is intentional).
--
Cheers,
Stephen Rothwell
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2024-02-05 0:04 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-07 4:19 linux-next: build warnings after merge of the hwmon-staging tree Stephen Rothwell
2022-06-07 9:37 ` Bagas Sanjaya
2022-06-07 12:40 ` Guenter Roeck
-- strict thread matches above, loose matches on Subject: below --
2024-02-04 23:41 Stephen Rothwell
2024-02-05 0:04 ` Guenter Roeck
2022-06-07 4:23 Stephen Rothwell
2022-06-07 9:35 ` Bagas Sanjaya
2022-06-07 12:39 ` Guenter Roeck
2021-11-24 5:22 Stephen Rothwell
2019-06-06 0:32 Stephen Rothwell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).