linux-next: build warnings after merge of the hwmon-staging tree

linux-next: build warnings after merge of the hwmon-staging tree

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 441 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (htmldocs)
produced these warnings:

Documentation/hwmon/lm90.rst:493: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/hwmon/lm90.rst:494: WARNING: Bullet list ends without a blank line; unexpected unindent.

Introduced by commit

  7dd47c2603aa ("hwmon: (lm90) Support MAX1617 and LM84")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: linux-next: build warnings after merge of the hwmon-staging tree

[Bagas Sanjaya]

On Tue, Jun 07, 2022 at 02:23:01PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
> produced these warnings:
> 
> Documentation/hwmon/lm90.rst:493: WARNING: Bullet list ends without a blank line; unexpected unindent.
> Documentation/hwmon/lm90.rst:494: WARNING: Bullet list ends without a blank line; unexpected unindent.
> 
> Introduced by commit
> 
>   7dd47c2603aa ("hwmon: (lm90) Support MAX1617 and LM84")
>

Hi Stephen,

These warnings above doesn't appear when doing htmldocs build using
Sphinx installed from pip on my system.

Cc-ing linux-doc list.

Thanks.

-- 
An old man doll... just what I always wanted! - Clara

Re: linux-next: build warnings after merge of the hwmon-staging tree

[Guenter Roeck]

On 6/7/22 02:35, Bagas Sanjaya wrote:
> On Tue, Jun 07, 2022 at 02:23:01PM +1000, Stephen Rothwell wrote:
>> Hi all,
>>
>> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
>> produced these warnings:
>>
>> Documentation/hwmon/lm90.rst:493: WARNING: Bullet list ends without a blank line; unexpected unindent.
>> Documentation/hwmon/lm90.rst:494: WARNING: Bullet list ends without a blank line; unexpected unindent.
>>
>> Introduced by commit
>>
>>    7dd47c2603aa ("hwmon: (lm90) Support MAX1617 and LM84")
>>
> 
> Hi Stephen,
> 
> These warnings above doesn't appear when doing htmldocs build using
> Sphinx installed from pip on my system.
> 

That is possibly because I already fixed it up (in one place a '-'
instead of '*' had slipped in).

Guenter

linux-next: build warnings after merge of the hwmon-staging tree

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 491 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (x86_64
allmodconfig) produced these warnings:

WARNING: modpost: module mpq8785 uses symbol pmbus_do_probe from namespace PMBUS, but does not import it.
WARNING: modpost: module mpq8785 uses symbol pmbus_read_byte_data from namespace PMBUS, but does not import it.

Introduced by commit

  7dd62e578cb4 ("hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 484 bytes --]

Re: linux-next: build warnings after merge of the hwmon-staging tree

[Guenter Roeck]

On 2/4/24 15:41, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the hwmon-staging tree, today's linux-next build (x86_64
> allmodconfig) produced these warnings:
> 
> WARNING: modpost: module mpq8785 uses symbol pmbus_do_probe from namespace PMBUS, but does not import it.
> WARNING: modpost: module mpq8785 uses symbol pmbus_read_byte_data from namespace PMBUS, but does not import it.
> 
> Introduced by commit
> 
>    7dd62e578cb4 ("hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter")
> 
Now fixed up.

Thanks,
Guenter

linux-next: build warnings after merge of the hwmon-staging tree

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 2674 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (htmldocs)
produced these warnings:

Documentation/hwmon/lt7182s.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Documentation/hwmon/lt7182s.rst:75: WARNING: Malformed table.
Text in column margin in table line 33.

======================  ====================================
curr[1-2]_label         "iin[12]"
curr[1-2]_input         Measured input current
curr[1-2]_max           Maximum input current
curr[1-2]_max_alarm     Current high alarm

curr[3-4]_label         "iout[1-2]"
curr[3-4]_input         Measured output current
curr[3-4]_highest       Highest measured output current
curr[3-4]_max           Maximum output current
curr[3-4]_max_alarm     Output current high alarm

in[1-2]_label           "vin[12]"
in[1-2]_input           Measured input voltage
in[1-2]_highest         Highest measured input voltage
in[1-2]_crit            Critical maximum input voltage
in[1-2]_crit_alarm      Input voltage critical high alarm
in[1-2]_min             Minimum input voltage
in[1-2]_min_alarm       Input voltage low alarm
in[1-2]_rated_min       Rated minimum input voltage
in[1-2]_rated_max       Rated maximum input voltage
in1_reset_history       Write to reset history for all attributes

in[3-5]_label           "vmon[1-3]"
in[3-5]_input           Measured voltage on ITH1/ITH2/EXTVCC pins
                        Only available if enabled with MFR_ADC_CONTROL_LT7182S
                        command.

in[3-4|6-7]_label       "vout[1-2]"
in[3-4|6-7]_input       Measured output voltage
in[3-4|6-7]_highest     Highest measured output voltage
in[3-4|6-7]_lcrit       Critical minimum output voltage
in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
in[3-4|6-7]_min         Minimum output voltage
in[3-4|6-7]_max_alarm   Output voltage low alarm
in[3-4|6-7]_max         Maximum output voltage
in[3-4|6-7]_max_alarm   Output voltage high alarm
in[3-4|6-7]_crit        Critical maximum output voltage
in[3-4|6-7]_crit_alarm  Output voltage critical high alarm

power[1-2]_label        "pout[1-2]"
power[1-2]_input        Measured output power

temp1_input             Measured temperature
temp1_crit              Critical high temperature
temp1_crit_alarm        Chip temperature critical high alarm
temp1_max               Maximum temperature
temp1_max_alarm         Chip temperature high alarm
======================  ====================================

Introduced by commit

  3d6bcaa21fbd ("hwmon: (pmbus) Add support for Analog Devices LT7182S")



-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: linux-next: build warnings after merge of the hwmon-staging tree

[Bagas Sanjaya]

On Tue, Jun 07, 2022 at 02:19:58PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
> produced these warnings:
> 
> Documentation/hwmon/lt7182s.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
> Documentation/hwmon/lt7182s.rst:75: WARNING: Malformed table.
> Text in column margin in table line 33.
> 
> ======================  ====================================
> curr[1-2]_label         "iin[12]"
> curr[1-2]_input         Measured input current
> curr[1-2]_max           Maximum input current
> curr[1-2]_max_alarm     Current high alarm
> 
> curr[3-4]_label         "iout[1-2]"
> curr[3-4]_input         Measured output current
> curr[3-4]_highest       Highest measured output current
> curr[3-4]_max           Maximum output current
> curr[3-4]_max_alarm     Output current high alarm
> 
> in[1-2]_label           "vin[12]"
> in[1-2]_input           Measured input voltage
> in[1-2]_highest         Highest measured input voltage
> in[1-2]_crit            Critical maximum input voltage
> in[1-2]_crit_alarm      Input voltage critical high alarm
> in[1-2]_min             Minimum input voltage
> in[1-2]_min_alarm       Input voltage low alarm
> in[1-2]_rated_min       Rated minimum input voltage
> in[1-2]_rated_max       Rated maximum input voltage
> in1_reset_history       Write to reset history for all attributes
> 
> in[3-5]_label           "vmon[1-3]"
> in[3-5]_input           Measured voltage on ITH1/ITH2/EXTVCC pins
>                         Only available if enabled with MFR_ADC_CONTROL_LT7182S
>                         command.
> 
> in[3-4|6-7]_label       "vout[1-2]"
> in[3-4|6-7]_input       Measured output voltage
> in[3-4|6-7]_highest     Highest measured output voltage
> in[3-4|6-7]_lcrit       Critical minimum output voltage
> in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
> in[3-4|6-7]_min         Minimum output voltage
> in[3-4|6-7]_max_alarm   Output voltage low alarm
> in[3-4|6-7]_max         Maximum output voltage
> in[3-4|6-7]_max_alarm   Output voltage high alarm
> in[3-4|6-7]_crit        Critical maximum output voltage
> in[3-4|6-7]_crit_alarm  Output voltage critical high alarm
> 
> power[1-2]_label        "pout[1-2]"
> power[1-2]_input        Measured output power
> 
> temp1_input             Measured temperature
> temp1_crit              Critical high temperature
> temp1_crit_alarm        Chip temperature critical high alarm
> temp1_max               Maximum temperature
> temp1_max_alarm         Chip temperature high alarm
> ======================  ====================================
> 
> Introduced by commit
> 
>   3d6bcaa21fbd ("hwmon: (pmbus) Add support for Analog Devices LT7182S")
> 

Hi Stephen,

The warning above doesn't appear when doing htmldocs build using Sphinx
installed from pip on my system.

Cc-ing linux-doc list.

-- 
An old man doll... just what I always wanted! - Clara

Re: linux-next: build warnings after merge of the hwmon-staging tree

[Guenter Roeck]

On 6/7/22 02:37, Bagas Sanjaya wrote:
> On Tue, Jun 07, 2022 at 02:19:58PM +1000, Stephen Rothwell wrote:
>> Hi all,
>>
>> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
>> produced these warnings:
>>
>> Documentation/hwmon/lt7182s.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
>> Documentation/hwmon/lt7182s.rst:75: WARNING: Malformed table.
>> Text in column margin in table line 33.
>>
>> ======================  ====================================
>> curr[1-2]_label         "iin[12]"
>> curr[1-2]_input         Measured input current
>> curr[1-2]_max           Maximum input current
>> curr[1-2]_max_alarm     Current high alarm
>>
>> curr[3-4]_label         "iout[1-2]"
>> curr[3-4]_input         Measured output current
>> curr[3-4]_highest       Highest measured output current
>> curr[3-4]_max           Maximum output current
>> curr[3-4]_max_alarm     Output current high alarm
>>
>> in[1-2]_label           "vin[12]"
>> in[1-2]_input           Measured input voltage
>> in[1-2]_highest         Highest measured input voltage
>> in[1-2]_crit            Critical maximum input voltage
>> in[1-2]_crit_alarm      Input voltage critical high alarm
>> in[1-2]_min             Minimum input voltage
>> in[1-2]_min_alarm       Input voltage low alarm
>> in[1-2]_rated_min       Rated minimum input voltage
>> in[1-2]_rated_max       Rated maximum input voltage
>> in1_reset_history       Write to reset history for all attributes
>>
>> in[3-5]_label           "vmon[1-3]"
>> in[3-5]_input           Measured voltage on ITH1/ITH2/EXTVCC pins
>>                          Only available if enabled with MFR_ADC_CONTROL_LT7182S
>>                          command.
>>
>> in[3-4|6-7]_label       "vout[1-2]"
>> in[3-4|6-7]_input       Measured output voltage
>> in[3-4|6-7]_highest     Highest measured output voltage
>> in[3-4|6-7]_lcrit       Critical minimum output voltage
>> in[3-4|6-7]_lcrit_alarm Output voltage critical low alarm
                          ^
>> in[3-4|6-7]_min         Minimum output voltage
>> in[3-4|6-7]_max_alarm   Output voltage low alarm
>> in[3-4|6-7]_max         Maximum output voltage
>> in[3-4|6-7]_max_alarm   Output voltage high alarm
>> in[3-4|6-7]_crit        Critical maximum output voltage
>> in[3-4|6-7]_crit_alarm  Output voltage critical high alarm
>>
>> power[1-2]_label        "pout[1-2]"
>> power[1-2]_input        Measured output power
>>
>> temp1_input             Measured temperature
>> temp1_crit              Critical high temperature
>> temp1_crit_alarm        Chip temperature critical high alarm
>> temp1_max               Maximum temperature
>> temp1_max_alarm         Chip temperature high alarm
>> ======================  ====================================
>>
>> Introduced by commit
>>
>>    3d6bcaa21fbd ("hwmon: (pmbus) Add support for Analog Devices LT7182S")
>>
> 
> Hi Stephen,
> 
> The warning above doesn't appear when doing htmldocs build using Sphinx
> installed from pip on my system.
> 

I already fixed it up.

Guenter

linux-next: build warnings after merge of the hwmon-staging tree

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 516 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (htmldocs)
produced these warnings:

Documentation/hwmon/asus_wmi_sensors.rst:33: WARNING: Unexpected indentation.
Documentation/hwmon/asus_wmi_sensors.rst:68: WARNING: Unexpected indentation.
Documentation/hwmon/asus_wmi_sensors.rst:76: WARNING: Block quote ends without a blank line; unexpected unindent.

Introduced by commit

  9d07e54a25b8 ("hwmon: (asus_wmi_sensors) Support X370 Asus WMI.")

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

linux-next: build warnings after merge of the hwmon-staging tree

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 1416 bytes --]

Hi all,

After merging the hwmon-staging tree, today's linux-next build (x86_64
allmodconfig) produced this warning:

drivers/hwmon/nct7904.c: In function 'nct7904_in_is_visible':
drivers/hwmon/nct7904.c:313:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (channel > 0 && (data->vsen_mask & BIT(index)))
      ^
drivers/hwmon/nct7904.c:315:2: note: here
  case hwmon_in_min:
  ^~~~
drivers/hwmon/nct7904.c: In function 'nct7904_fan_is_visible':
drivers/hwmon/nct7904.c:230:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (data->fanin_mask & (1 << channel))
      ^
drivers/hwmon/nct7904.c:232:2: note: here
  case hwmon_fan_min:
  ^~~~
drivers/hwmon/nct7904.c: In function 'nct7904_temp_is_visible':
drivers/hwmon/nct7904.c:443:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (channel < 5) {
      ^
drivers/hwmon/nct7904.c:450:2: note: here
  case hwmon_temp_max:
  ^~~~

Introduced by commit

  af55ab0b0792 ("hwmon: (nct7904) Add extra sysfs support for fan, voltage and temperature.")

I get these warnings because I am building with -Wimplicit-fallthrough
in attempt to catch new additions early.  The gcc warning can be turned
off by adding a /* fall through */ comment at the point the fall through
happens (assuming that the fall through is intentional).

-- 
Cheers,
Stephen Rothwell

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]