From: bchihi@baylibre.com
To: rafael@kernel.org, rui.zhang@intel.com,
daniel.lezcano@linaro.org, amitk@kernel.org
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
khilman@baylibre.com, mka@chromium.org, robh+dt@kernel.org,
krzk+dt@kernel.org, matthias.bgg@gmail.com,
p.zabel@pengutronix.de, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, james.lo@mediatek.com,
fan.chen@mediatek.com, louis.yu@mediatek.com,
rex-bc.chen@mediatek.com, abailon@baylibre.com
Subject: [PATCH v8.1, 6/7] arm64: dts: mt8195: Add thermal zone
Date: Thu, 4 Aug 2022 15:09:11 +0200 [thread overview]
Message-ID: <20220804130912.676043-7-bchihi@baylibre.com> (raw)
In-Reply-To: <20220804130912.676043-1-bchihi@baylibre.com>
From: Tinghan Shen <tinghan.shen@mediatek.com>
This adds the thermal zone for the mt8195.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 111 +++++++++++++++++++++++
1 file changed, 111 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index cbd0401968a2..5890e688eebe 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/reset/mt8195-resets.h>
/ {
compatible = "mediatek,mt8195";
@@ -452,6 +453,28 @@ spi0: spi@1100a000 {
status = "disabled";
};
+ lvts_ap: thermal-sensor@1100b000 {
+ compatible = "mediatek,mt8195-lvts-ap";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+ nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
+ };
+
+ lvts_mcu: thermal-sensor@11278000 {
+ compatible = "mediatek,mt8195-lvts-mcu";
+ #thermal-sensor-cells = <1>;
+ reg = <0 0x11278000 0 0x1000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+ resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+ nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2";
+ };
+
spi1: spi@11010000 {
compatible = "mediatek,mt8195-spi",
"mediatek,mt6765-spi";
@@ -1106,4 +1129,92 @@ vencsys_core1: clock-controller@1b000000 {
#clock-cells = <1>;
};
};
+
+ thermal_zones: thermal-zones {
+ cpu-big1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 0>;
+ };
+ cpu-big2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 1>;
+ };
+ cpu-big3-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 2>;
+ };
+ cpu-big4-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 3>;
+ };
+ cpu-little1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 4>;
+ };
+ cpu-little2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 5>;
+ };
+ cpu-little3-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 6>;
+ };
+ cpu-little4-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_mcu 7>;
+ };
+ vpu1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 0>;
+ };
+ vpu2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 1>;
+ };
+ gpu1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 2>;
+ };
+ gpu2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 3>;
+ };
+ vdec-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 4>;
+ };
+ img-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 5>;
+ };
+ infra-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 6>;
+ };
+ cam1-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 7>;
+ };
+ cam2-thermal {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&lvts_ap 8>;
+ };
+ };
};
--
2.34.1
next prev parent reply other threads:[~2022-08-04 13:10 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-04 13:09 [PATCH v8.1, 0/7] Add LVTS architecture thermal bchihi
2022-08-04 13:09 ` [PATCH v8.1, 1/7] thermal: mediatek: Relocate driver to mediatek folder bchihi
2022-08-04 23:04 ` Nícolas F. R. A. Prado
2022-08-05 11:53 ` Balsam CHIHI
2022-08-04 13:09 ` [PATCH v8.1, 2/7] dt-bindings: thermal: Add binding document for LVTS thermal controllers bchihi
2022-08-04 15:21 ` Krzysztof Kozlowski
2022-08-04 19:50 ` Rob Herring
2022-08-04 23:11 ` Nícolas F. R. A. Prado
2022-08-05 8:48 ` Krzysztof Kozlowski
2022-08-04 13:09 ` [PATCH v8.1, 3/7] arm64: dts: mt8192: Add thermal zone bchihi
2022-08-04 15:23 ` Krzysztof Kozlowski
2022-08-04 23:20 ` Nícolas F. R. A. Prado
2022-08-04 13:09 ` [PATCH v8.1, 4/7] thermal: mediatek: Add LVTS driver for mt8192 thermal zones bchihi
2022-08-04 18:15 ` Randy Dunlap
2022-08-04 23:39 ` Nícolas F. R. A. Prado
2022-08-05 0:00 ` Nícolas F. R. A. Prado
2022-08-04 13:09 ` [PATCH v8.1, 5/7] arm64: dts: mt8195: Add efuse node to mt8195 bchihi
2022-08-04 15:22 ` Krzysztof Kozlowski
2022-08-05 14:55 ` Balsam CHIHI
2022-08-04 13:09 ` bchihi [this message]
2022-08-04 15:22 ` [PATCH v8.1, 6/7] arm64: dts: mt8195: Add thermal zone Krzysztof Kozlowski
2022-08-04 13:09 ` [PATCH v8.1, 7/7] thermal: mediatek: Add thermal zone settings for mt8195 bchihi
2022-08-04 23:08 ` [PATCH v8.1, 0/7] Add LVTS architecture thermal Nícolas F. R. A. Prado
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220804130912.676043-7-bchihi@baylibre.com \
--to=bchihi@baylibre.com \
--cc=abailon@baylibre.com \
--cc=amitk@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=fan.chen@mediatek.com \
--cc=james.lo@mediatek.com \
--cc=khilman@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=louis.yu@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=mka@chromium.org \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=rex-bc.chen@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).