[PATCH AUTOSEL 5.18 01/39] lib/list_debug.c: Detect uninitialized lists

[PATCH AUTOSEL 5.18 01/39] lib/list_debug.c: Detect uninitialized lists

[Sasha Levin]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 0cc011c576aaa4de505046f7a6c90933d7c749a9 ]

In some circumstances, attempts are made to add entries to or to remove
entries from an uninitialized list.  A prime example is
amdgpu_bo_vm_destroy(): It is indirectly called from
ttm_bo_init_reserved() if that function fails, and tries to remove an
entry from a list.  However, that list is only initialized in
amdgpu_bo_create_vm() after the call to ttm_bo_init_reserved() returned
success.  This results in crashes such as

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 1 PID: 1479 Comm: chrome Not tainted 5.10.110-15768-g29a72e65dae5
 Hardware name: Google Grunt/Grunt, BIOS Google_Grunt.11031.149.0 07/15/2020
 RIP: 0010:__list_del_entry_valid+0x26/0x7d
 ...
 Call Trace:
  amdgpu_bo_vm_destroy+0x48/0x8b
  ttm_bo_init_reserved+0x1d7/0x1e0
  amdgpu_bo_create+0x212/0x476
  ? amdgpu_bo_user_destroy+0x23/0x23
  ? kmem_cache_alloc+0x60/0x271
  amdgpu_bo_create_vm+0x40/0x7d
  amdgpu_vm_pt_create+0xe8/0x24b
 ...

Check if the list's prev and next pointers are NULL to catch such problems.

Link: https://lkml.kernel.org/r/20220531222951.92073-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/list_debug.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/lib/list_debug.c b/lib/list_debug.c
index 9daa3fb9d1cd..d98d43f80958 100644
--- a/lib/list_debug.c
+++ b/lib/list_debug.c
@@ -20,7 +20,11 @@
 bool __list_add_valid(struct list_head *new, struct list_head *prev,
 		      struct list_head *next)
 {
-	if (CHECK_DATA_CORRUPTION(next->prev != prev,
+	if (CHECK_DATA_CORRUPTION(prev == NULL,
+			"list_add corruption. prev is NULL.\n") ||
+	    CHECK_DATA_CORRUPTION(next == NULL,
+			"list_add corruption. next is NULL.\n") ||
+	    CHECK_DATA_CORRUPTION(next->prev != prev,
 			"list_add corruption. next->prev should be prev (%px), but was %px. (next=%px).\n",
 			prev, next->prev, next) ||
 	    CHECK_DATA_CORRUPTION(prev->next != next,
@@ -42,7 +46,11 @@ bool __list_del_entry_valid(struct list_head *entry)
 	prev = entry->prev;
 	next = entry->next;
 
-	if (CHECK_DATA_CORRUPTION(next == LIST_POISON1,
+	if (CHECK_DATA_CORRUPTION(next == NULL,
+			"list_del corruption, %px->next is NULL\n", entry) ||
+	    CHECK_DATA_CORRUPTION(prev == NULL,
+			"list_del corruption, %px->prev is NULL\n", entry) ||
+	    CHECK_DATA_CORRUPTION(next == LIST_POISON1,
 			"list_del corruption, %px->next is LIST_POISON1 (%px)\n",
 			entry, LIST_POISON1) ||
 	    CHECK_DATA_CORRUPTION(prev == LIST_POISON2,
-- 
2.35.1

[PATCH AUTOSEL 5.18 02/39] tty: serial: Fix refcount leak bug in ucc_uart.c

[Sasha Levin]

From: Liang He <windhl@126.com>

[ Upstream commit d24d7bb2cd947676f9b71fb944d045e09b8b282f ]

In soc_info(), of_find_node_by_type() will return a node pointer
with refcount incremented. We should use of_node_put() when it is
not used anymore.

Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/ucc_uart.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 6000853973c1..3cc9ef08455c 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1137,6 +1137,8 @@ static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l)
 		/* No compatible property, so try the name. */
 		soc_string = np->name;
 
+	of_node_put(np);
+
 	/* Extract the SOC number from the "PowerPC," string */
 	if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc)
 		return 0;
-- 
2.35.1

[PATCH AUTOSEL 5.18 03/39] KVM: PPC: Book3S HV: Fix "rm_exit" entry in debugfs timings

[Sasha Levin]

From: Fabiano Rosas <farosas@linux.ibm.com>

[ Upstream commit 9981bace85d816ed8724ac46e49285e8488d29e6 ]

At debugfs/kvm/<pid>/vcpu0/timings we show how long each part of the
code takes to run:

$ cat /sys/kernel/debug/kvm/*-*/vcpu0/timings
rm_entry: 123785 49398892 118 4898
rm_intr: 123780 6075890 22 390
rm_exit: 0 0 0 0                     <-- NOK
guest: 123780 46732919988 402 9997638
cede: 0 0 0 0                        <-- OK, no cede napping in P9

The "rm_exit" is always showing zero because it is the last one and
end_timing does not increment the counter of the previous entry.

We can fix it by calling accumulate_time again instead of
end_timing. That way the counter gets incremented. The rest of the
arithmetic can be ignored because there are no timing points after
this and the accumulators are reset before the next round.

Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525130554.2614394-2-farosas@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv_p9_entry.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv_p9_entry.c b/arch/powerpc/kvm/book3s_hv_p9_entry.c
index a28e5b3daabd..f7591b6c92d1 100644
--- a/arch/powerpc/kvm/book3s_hv_p9_entry.c
+++ b/arch/powerpc/kvm/book3s_hv_p9_entry.c
@@ -438,15 +438,6 @@ void restore_p9_host_os_sprs(struct kvm_vcpu *vcpu,
 EXPORT_SYMBOL_GPL(restore_p9_host_os_sprs);
 
 #ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING
-static void __start_timing(struct kvm_vcpu *vcpu, struct kvmhv_tb_accumulator *next)
-{
-	struct kvmppc_vcore *vc = vcpu->arch.vcore;
-	u64 tb = mftb() - vc->tb_offset_applied;
-
-	vcpu->arch.cur_activity = next;
-	vcpu->arch.cur_tb_start = tb;
-}
-
 static void __accumulate_time(struct kvm_vcpu *vcpu, struct kvmhv_tb_accumulator *next)
 {
 	struct kvmppc_vcore *vc = vcpu->arch.vcore;
@@ -478,8 +469,8 @@ static void __accumulate_time(struct kvm_vcpu *vcpu, struct kvmhv_tb_accumulator
 	curr->seqcount = seq + 2;
 }
 
-#define start_timing(vcpu, next) __start_timing(vcpu, next)
-#define end_timing(vcpu) __start_timing(vcpu, NULL)
+#define start_timing(vcpu, next) __accumulate_time(vcpu, next)
+#define end_timing(vcpu) __accumulate_time(vcpu, NULL)
 #define accumulate_time(vcpu, next) __accumulate_time(vcpu, next)
 #else
 #define start_timing(vcpu, next) do {} while (0)
-- 
2.35.1

[PATCH AUTOSEL 5.18 04/39] vfio: Clear the caps->buf to NULL after free

[Sasha Levin]

From: Schspa Shi <schspa@gmail.com>

[ Upstream commit 6641085e8d7b3f061911517f79a2a15a0a21b97b ]

On buffer resize failure, vfio_info_cap_add() will free the buffer,
report zero for the size, and return -ENOMEM.  As additional
hardening, also clear the buffer pointer to prevent any chance of a
double free.

Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220629022948.55608-1-schspa@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/vfio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
index a4555014bd1e..544403171ba3 100644
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -2034,6 +2034,7 @@ struct vfio_info_cap_header *vfio_info_cap_add(struct vfio_info_cap *caps,
 	buf = krealloc(caps->buf, caps->size + size, GFP_KERNEL);
 	if (!buf) {
 		kfree(caps->buf);
+		caps->buf = NULL;
 		caps->size = 0;
 		return ERR_PTR(-ENOMEM);
 	}
-- 
2.35.1

[PATCH AUTOSEL 5.18 05/39] mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start

[Sasha Levin]

From: Liang He <windhl@126.com>

[ Upstream commit 7a9f743ceead60ed454c46fbc3085ee9a79cbebb ]

We should call of_node_put() for the reference 'uctl_node' returned by
of_get_parent() which will increase the refcount. Otherwise, there will
be a refcount leak bug.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/cavium-octeon/octeon-platform.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index a994022e32c9..ce05c0dd3acd 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -86,11 +86,12 @@ static void octeon2_usb_clocks_start(struct device *dev)
 					 "refclk-frequency", &clock_rate);
 		if (i) {
 			dev_err(dev, "No UCTL \"refclk-frequency\"\n");
+			of_node_put(uctl_node);
 			goto exit;
 		}
 		i = of_property_read_string(uctl_node,
 					    "refclk-type", &clock_type);
-
+		of_node_put(uctl_node);
 		if (!i && strcmp("crystal", clock_type) == 0)
 			is_crystal_clock = true;
 	}
-- 
2.35.1

[PATCH AUTOSEL 5.18 06/39] iommu/io-pgtable-arm-v7s: Add a quirk to allow pgtable PA up to 35bit

[Sasha Levin]

From: Yunfei Wang <yf.wang@mediatek.com>

[ Upstream commit bfdd231374181254742c5e2faef0bef2d30c0ee4 ]

Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA and
cause pgtable PA size larger than 32bit.

Since Mediatek IOMMU hardware support at most 35bit PA in pgtable,
so add a quirk to allow the PA of pgtables support up to bit35.

Signed-off-by: Ning Li <ning.li@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220630092927.24925-2-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/io-pgtable-arm-v7s.c | 75 ++++++++++++++++++++++--------
 include/linux/io-pgtable.h         | 15 ++++--
 2 files changed, 66 insertions(+), 24 deletions(-)

diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c
index be066c1503d3..ba3115fd0f86 100644
--- a/drivers/iommu/io-pgtable-arm-v7s.c
+++ b/drivers/iommu/io-pgtable-arm-v7s.c
@@ -182,14 +182,8 @@ static bool arm_v7s_is_mtk_enabled(struct io_pgtable_cfg *cfg)
 		(cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_EXT);
 }
 
-static arm_v7s_iopte paddr_to_iopte(phys_addr_t paddr, int lvl,
-				    struct io_pgtable_cfg *cfg)
+static arm_v7s_iopte to_mtk_iopte(phys_addr_t paddr, arm_v7s_iopte pte)
 {
-	arm_v7s_iopte pte = paddr & ARM_V7S_LVL_MASK(lvl);
-
-	if (!arm_v7s_is_mtk_enabled(cfg))
-		return pte;
-
 	if (paddr & BIT_ULL(32))
 		pte |= ARM_V7S_ATTR_MTK_PA_BIT32;
 	if (paddr & BIT_ULL(33))
@@ -199,6 +193,17 @@ static arm_v7s_iopte paddr_to_iopte(phys_addr_t paddr, int lvl,
 	return pte;
 }
 
+static arm_v7s_iopte paddr_to_iopte(phys_addr_t paddr, int lvl,
+				    struct io_pgtable_cfg *cfg)
+{
+	arm_v7s_iopte pte = paddr & ARM_V7S_LVL_MASK(lvl);
+
+	if (arm_v7s_is_mtk_enabled(cfg))
+		return to_mtk_iopte(paddr, pte);
+
+	return pte;
+}
+
 static phys_addr_t iopte_to_paddr(arm_v7s_iopte pte, int lvl,
 				  struct io_pgtable_cfg *cfg)
 {
@@ -240,10 +245,17 @@ static void *__arm_v7s_alloc_table(int lvl, gfp_t gfp,
 	dma_addr_t dma;
 	size_t size = ARM_V7S_TABLE_SIZE(lvl, cfg);
 	void *table = NULL;
+	gfp_t gfp_l1;
+
+	/*
+	 * ARM_MTK_TTBR_EXT extend the translation table base support larger
+	 * memory address.
+	 */
+	gfp_l1 = cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT ?
+		 GFP_KERNEL : ARM_V7S_TABLE_GFP_DMA;
 
 	if (lvl == 1)
-		table = (void *)__get_free_pages(
-			__GFP_ZERO | ARM_V7S_TABLE_GFP_DMA, get_order(size));
+		table = (void *)__get_free_pages(gfp_l1 | __GFP_ZERO, get_order(size));
 	else if (lvl == 2)
 		table = kmem_cache_zalloc(data->l2_tables, gfp);
 
@@ -251,7 +263,8 @@ static void *__arm_v7s_alloc_table(int lvl, gfp_t gfp,
 		return NULL;
 
 	phys = virt_to_phys(table);
-	if (phys != (arm_v7s_iopte)phys) {
+	if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT ?
+	    phys >= (1ULL << cfg->oas) : phys != (arm_v7s_iopte)phys) {
 		/* Doesn't fit in PTE */
 		dev_err(dev, "Page table does not fit in PTE: %pa", &phys);
 		goto out_free;
@@ -457,9 +470,14 @@ static arm_v7s_iopte arm_v7s_install_table(arm_v7s_iopte *table,
 					   arm_v7s_iopte curr,
 					   struct io_pgtable_cfg *cfg)
 {
+	phys_addr_t phys = virt_to_phys(table);
 	arm_v7s_iopte old, new;
 
-	new = virt_to_phys(table) | ARM_V7S_PTE_TYPE_TABLE;
+	new = phys | ARM_V7S_PTE_TYPE_TABLE;
+
+	if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT)
+		new = to_mtk_iopte(phys, new);
+
 	if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS)
 		new |= ARM_V7S_ATTR_NS_TABLE;
 
@@ -779,6 +797,8 @@ static struct io_pgtable *arm_v7s_alloc_pgtable(struct io_pgtable_cfg *cfg,
 						void *cookie)
 {
 	struct arm_v7s_io_pgtable *data;
+	slab_flags_t slab_flag;
+	phys_addr_t paddr;
 
 	if (cfg->ias > (arm_v7s_is_mtk_enabled(cfg) ? 34 : ARM_V7S_ADDR_BITS))
 		return NULL;
@@ -788,7 +808,8 @@ static struct io_pgtable *arm_v7s_alloc_pgtable(struct io_pgtable_cfg *cfg,
 
 	if (cfg->quirks & ~(IO_PGTABLE_QUIRK_ARM_NS |
 			    IO_PGTABLE_QUIRK_NO_PERMS |
-			    IO_PGTABLE_QUIRK_ARM_MTK_EXT))
+			    IO_PGTABLE_QUIRK_ARM_MTK_EXT |
+			    IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT))
 		return NULL;
 
 	/* If ARM_MTK_4GB is enabled, the NO_PERMS is also expected. */
@@ -796,15 +817,27 @@ static struct io_pgtable *arm_v7s_alloc_pgtable(struct io_pgtable_cfg *cfg,
 	    !(cfg->quirks & IO_PGTABLE_QUIRK_NO_PERMS))
 			return NULL;
 
+	if ((cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT) &&
+	    !arm_v7s_is_mtk_enabled(cfg))
+		return NULL;
+
 	data = kmalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return NULL;
 
 	spin_lock_init(&data->split_lock);
+
+	/*
+	 * ARM_MTK_TTBR_EXT extend the translation table base support larger
+	 * memory address.
+	 */
+	slab_flag = cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT ?
+		    0 : ARM_V7S_TABLE_SLAB_FLAGS;
+
 	data->l2_tables = kmem_cache_create("io-pgtable_armv7s_l2",
 					    ARM_V7S_TABLE_SIZE(2, cfg),
 					    ARM_V7S_TABLE_SIZE(2, cfg),
-					    ARM_V7S_TABLE_SLAB_FLAGS, NULL);
+					    slab_flag, NULL);
 	if (!data->l2_tables)
 		goto out_free_data;
 
@@ -850,12 +883,16 @@ static struct io_pgtable *arm_v7s_alloc_pgtable(struct io_pgtable_cfg *cfg,
 	wmb();
 
 	/* TTBR */
-	cfg->arm_v7s_cfg.ttbr = virt_to_phys(data->pgd) | ARM_V7S_TTBR_S |
-				(cfg->coherent_walk ? (ARM_V7S_TTBR_NOS |
-				 ARM_V7S_TTBR_IRGN_ATTR(ARM_V7S_RGN_WBWA) |
-				 ARM_V7S_TTBR_ORGN_ATTR(ARM_V7S_RGN_WBWA)) :
-				(ARM_V7S_TTBR_IRGN_ATTR(ARM_V7S_RGN_NC) |
-				 ARM_V7S_TTBR_ORGN_ATTR(ARM_V7S_RGN_NC)));
+	paddr = virt_to_phys(data->pgd);
+	if (arm_v7s_is_mtk_enabled(cfg))
+		cfg->arm_v7s_cfg.ttbr = paddr | upper_32_bits(paddr);
+	else
+		cfg->arm_v7s_cfg.ttbr = paddr | ARM_V7S_TTBR_S |
+					(cfg->coherent_walk ? (ARM_V7S_TTBR_NOS |
+					 ARM_V7S_TTBR_IRGN_ATTR(ARM_V7S_RGN_WBWA) |
+					 ARM_V7S_TTBR_ORGN_ATTR(ARM_V7S_RGN_WBWA)) :
+					(ARM_V7S_TTBR_IRGN_ATTR(ARM_V7S_RGN_NC) |
+					 ARM_V7S_TTBR_ORGN_ATTR(ARM_V7S_RGN_NC)));
 	return &data->iop;
 
 out_free_data:
diff --git a/include/linux/io-pgtable.h b/include/linux/io-pgtable.h
index 86af6f0a00a2..ca98aeadcc80 100644
--- a/include/linux/io-pgtable.h
+++ b/include/linux/io-pgtable.h
@@ -74,17 +74,22 @@ struct io_pgtable_cfg {
 	 *	to support up to 35 bits PA where the bit32, bit33 and bit34 are
 	 *	encoded in the bit9, bit4 and bit5 of the PTE respectively.
 	 *
+	 * IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT: (ARM v7s format) MediaTek IOMMUs
+	 *	extend the translation table base support up to 35 bits PA, the
+	 *	encoding format is same with IO_PGTABLE_QUIRK_ARM_MTK_EXT.
+	 *
 	 * IO_PGTABLE_QUIRK_ARM_TTBR1: (ARM LPAE format) Configure the table
 	 *	for use in the upper half of a split address space.
 	 *
 	 * IO_PGTABLE_QUIRK_ARM_OUTER_WBWA: Override the outer-cacheability
 	 *	attributes set in the TCR for a non-coherent page-table walker.
 	 */
-	#define IO_PGTABLE_QUIRK_ARM_NS		BIT(0)
-	#define IO_PGTABLE_QUIRK_NO_PERMS	BIT(1)
-	#define IO_PGTABLE_QUIRK_ARM_MTK_EXT	BIT(3)
-	#define IO_PGTABLE_QUIRK_ARM_TTBR1	BIT(5)
-	#define IO_PGTABLE_QUIRK_ARM_OUTER_WBWA	BIT(6)
+	#define IO_PGTABLE_QUIRK_ARM_NS			BIT(0)
+	#define IO_PGTABLE_QUIRK_NO_PERMS		BIT(1)
+	#define IO_PGTABLE_QUIRK_ARM_MTK_EXT		BIT(3)
+	#define IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT	BIT(4)
+	#define IO_PGTABLE_QUIRK_ARM_TTBR1		BIT(5)
+	#define IO_PGTABLE_QUIRK_ARM_OUTER_WBWA		BIT(6)
 	unsigned long			quirks;
 	unsigned long			pgsize_bitmap;
 	unsigned int			ias;
-- 
2.35.1

[PATCH AUTOSEL 5.18 07/39] riscv: dts: microchip: Add mpfs' topology information

[Sasha Levin]

From: Conor Dooley <conor.dooley@microchip.com>

[ Upstream commit 88d319c6abaeb37f0e2323275eaf57a8388e0265 ]

The mpfs has no cpu-map node, so tools like hwloc cannot correctly
parse the topology. Add the node using the existing node labels.

Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/microchip/microchip-mpfs.dtsi    | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index 2f75e39d2fdd..37c05ba6e6bf 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -143,6 +143,30 @@ cpu4_intc: interrupt-controller {
 				interrupt-controller;
 			};
 		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+			};
+		};
 	};
 
 	refclk: mssrefclk {
-- 
2.35.1

[PATCH AUTOSEL 5.18 08/39] ALSA: hda: Fix page fault in snd_hda_codec_shutdown()

[Sasha Levin]

From: Cezary Rojewski <cezary.rojewski@intel.com>

[ Upstream commit 980b3a8790b402e959a6d773b38b771019682be1 ]

If early probe of HDAudio bus driver fails e.g.: due to missing
firmware file, snd_hda_codec_shutdown() ends in manipulating
uninitialized codec->pcm_list_head causing page fault.

Iinitialization of HDAudio codec in ASoC is split in two:
- snd_hda_codec_device_init()
- snd_hda_codec_device_new()

snd_hda_codec_device_init() is called during probe_codecs() by HDAudio
bus driver while snd_hda_codec_device_new() is called by
codec-component's ->probe(). The second call will not happen until all
components required by related sound card are present within the ASoC
framework. With firmware failing to load during the PCI's deferred
initialization i.e.: probe_work(), no platform components are ever
registered. HDAudio codec enumeration is done at that point though, so
the codec components became registered to ASoC framework, calling
snd_hda_codec_device_init() in the process.

Now, during platform reboot snd_hda_codec_shutdown() is called for every
codec found on the HDAudio bus causing oops if any of them has not
completed both of their initialization steps. Relocating field
initialization fixes the issue.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-7-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_codec.c | 41 +++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 21 deletions(-)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 5cbac315dbe1..527616b39043 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -931,8 +931,28 @@ snd_hda_codec_device_init(struct hda_bus *bus, unsigned int codec_addr,
 	}
 
 	codec->bus = bus;
+	codec->depop_delay = -1;
+	codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
+	codec->core.dev.release = snd_hda_codec_dev_release;
+	codec->core.exec_verb = codec_exec_verb;
 	codec->core.type = HDA_DEV_LEGACY;
 
+	mutex_init(&codec->spdif_mutex);
+	mutex_init(&codec->control_mutex);
+	snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
+	snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
+	snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
+	snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
+	snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
+	snd_array_init(&codec->spdif_out, sizeof(struct hda_spdif_out), 16);
+	snd_array_init(&codec->jacktbl, sizeof(struct hda_jack_tbl), 16);
+	snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
+	INIT_LIST_HEAD(&codec->conn_list);
+	INIT_LIST_HEAD(&codec->pcm_list_head);
+	INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
+	refcount_set(&codec->pcm_ref, 1);
+	init_waitqueue_head(&codec->remove_sleep);
+
 	return codec;
 }
 EXPORT_SYMBOL_GPL(snd_hda_codec_device_init);
@@ -980,29 +1000,8 @@ int snd_hda_codec_device_new(struct hda_bus *bus, struct snd_card *card,
 	if (snd_BUG_ON(codec_addr > HDA_MAX_CODEC_ADDRESS))
 		return -EINVAL;
 
-	codec->core.dev.release = snd_hda_codec_dev_release;
-	codec->core.exec_verb = codec_exec_verb;
-
 	codec->card = card;
 	codec->addr = codec_addr;
-	mutex_init(&codec->spdif_mutex);
-	mutex_init(&codec->control_mutex);
-	snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 32);
-	snd_array_init(&codec->nids, sizeof(struct hda_nid_item), 32);
-	snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
-	snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
-	snd_array_init(&codec->cvt_setups, sizeof(struct hda_cvt_setup), 8);
-	snd_array_init(&codec->spdif_out, sizeof(struct hda_spdif_out), 16);
-	snd_array_init(&codec->jacktbl, sizeof(struct hda_jack_tbl), 16);
-	snd_array_init(&codec->verbs, sizeof(struct hda_verb *), 8);
-	INIT_LIST_HEAD(&codec->conn_list);
-	INIT_LIST_HEAD(&codec->pcm_list_head);
-	refcount_set(&codec->pcm_ref, 1);
-	init_waitqueue_head(&codec->remove_sleep);
-
-	INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
-	codec->depop_delay = -1;
-	codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
 
 #ifdef CONFIG_PM
 	codec->power_jiffies = jiffies;
-- 
2.35.1

[PATCH AUTOSEL 5.18 09/39] modules: Ensure natural alignment for .altinstructions and __bug_table sections

[Sasha Levin]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 87c482bdfa79f378297d92af49cdf265be199df5 ]

In the kernel image vmlinux.lds.S linker scripts the .altinstructions
and __bug_table sections are 4- or 8-byte aligned because they hold 32-
and/or 64-bit values.

Most architectures use altinstructions and BUG() or WARN() in modules as
well, but in the module linker script (module.lds.S) those sections are
currently missing. As consequence the linker will store their content
byte-aligned by default, which then can lead to unnecessary unaligned
memory accesses by the CPU when those tables are processed at runtime.

Usually unaligned memory accesses are unnoticed, because either the
hardware (as on x86 CPUs) or in-kernel exception handlers (e.g. on
parisc or sparc) emulate and fix them up at runtime. Nevertheless, such
unaligned accesses introduce a performance penalty and can even crash
the kernel if there is a bug in the unalignment exception handlers
(which happened once to me on the parisc architecture and which is why I
noticed that issue at all).

This patch fixes a non-critical issue and might be backported at any time.
It's trivial and shouldn't introduce any regression because it simply
tells the linker to use a different (8-byte alignment) for those
sections by default.

Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/all/Yr8%2Fgr8e8I7tVX4d@p100/
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/module.lds.S | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/scripts/module.lds.S b/scripts/module.lds.S
index 1d0e1e4dc3d2..3a3aa2354ed8 100644
--- a/scripts/module.lds.S
+++ b/scripts/module.lds.S
@@ -27,6 +27,8 @@ SECTIONS {
 	.ctors			0 : ALIGN(8) { *(SORT(.ctors.*)) *(.ctors) }
 	.init_array		0 : ALIGN(8) { *(SORT(.init_array.*)) *(.init_array) }
 
+	.altinstructions	0 : ALIGN(8) { KEEP(*(.altinstructions)) }
+	__bug_table		0 : ALIGN(8) { KEEP(*(__bug_table)) }
 	__jump_table		0 : ALIGN(8) { KEEP(*(__jump_table)) }
 
 	__patchable_function_entries : { *(__patchable_function_entries) }
-- 
2.35.1

[PATCH AUTOSEL 5.18 10/39] ASoC: rsnd: care default case on rsnd_ssiu_busif_err_irq_ctrl()

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit ef30911d3c39fd57884c348c29b9cbff88def155 ]

Before, ssiu.c didn't care SSI5-8, thus,
commit b1384d4c95088d0 ("ASoC: rsnd: care default case on
rsnd_ssiu_busif_err_status_clear()") cares it for status clear.

But we should care it for error irq handling, too.
This patch cares it.

Reported-by: Nguyen Bao Nguyen <nguyen.nguyen.yj@renesas.com>
Reported-by: Nishiyama Kunihiko <kunihiko.nishiyama.dn@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871quocio1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssiu.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c
index 4b8a63e336c7..d7f4646ee029 100644
--- a/sound/soc/sh/rcar/ssiu.c
+++ b/sound/soc/sh/rcar/ssiu.c
@@ -67,6 +67,8 @@ static void rsnd_ssiu_busif_err_irq_ctrl(struct rsnd_mod *mod, int enable)
 		shift  = 1;
 		offset = 1;
 		break;
+	default:
+		return;
 	}
 
 	for (i = 0; i < 4; i++) {
-- 
2.35.1

[PATCH AUTOSEL 5.18 11/39] riscv: dts: sifive: Add fu540 topology information

[Sasha Levin]

From: Conor Dooley <conor.dooley@microchip.com>

[ Upstream commit af8f260abc608c06e4466a282b53f1e2dc09f042 ]

The fu540 has no cpu-map node, so tools like hwloc cannot correctly
parse the topology. Add the node using the existing node labels.

Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220705190435.1790466-3-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 5c638fd5b35c..48423cd8f544 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -133,6 +133,30 @@ cpu4_intc: interrupt-controller {
 				interrupt-controller;
 			};
 		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+			};
+		};
 	};
 	soc {
 		#address-cells = <2>;
-- 
2.35.1

[PATCH AUTOSEL 5.18 12/39] riscv: dts: sifive: Add fu740 topology information

[Sasha Levin]

From: Conor Dooley <conor.dooley@microchip.com>

[ Upstream commit bf6cd1c01c959a31002dfa6784c0d8caffed4cf1 ]

The fu740 has no cpu-map node, so tools like hwloc cannot correctly
parse the topology. Add the node using the existing node labels.

Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220705190435.1790466-4-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
index 7b77c13496d8..43bed6c0a84f 100644
--- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -134,6 +134,30 @@ cpu4_intc: interrupt-controller {
 				interrupt-controller;
 			};
 		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+			};
+		};
 	};
 	soc {
 		#address-cells = <2>;
-- 
2.35.1

[PATCH AUTOSEL 5.18 13/39] riscv: dts: canaan: Add k210 topology information

[Sasha Levin]

From: Conor Dooley <conor.dooley@microchip.com>

[ Upstream commit d9d193dea8666bbf69fc21c5bdcdabaa34a466e3 ]

The k210 has no cpu-map node, so tools like hwloc cannot correctly
parse the topology. Add the node using the existing node labels.

Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220705190435.1790466-6-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/boot/dts/canaan/k210.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
index 44d338514761..ec944d1537dc 100644
--- a/arch/riscv/boot/dts/canaan/k210.dtsi
+++ b/arch/riscv/boot/dts/canaan/k210.dtsi
@@ -65,6 +65,18 @@ cpu1_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
 			};
 		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
 	};
 
 	sram: memory@80000000 {
-- 
2.35.1

[PATCH AUTOSEL 5.18 14/39] riscv: mmap with PROT_WRITE but no PROT_READ is invalid

[Sasha Levin]

From: Celeste Liu <coelacanthus@outlook.com>

[ Upstream commit 2139619bcad7ac44cc8f6f749089120594056613 ]

As mentioned in Table 4.5 in RISC-V spec Volume 2 Section 4.3, write
but not read is "Reserved for future use.". For now, they are not valid.
In the current code, -wx is marked as invalid, but -w- is not marked
as invalid.
This patch refines that judgment.

Reported-by: xctan <xc-tan@outlook.com>
Co-developed-by: dram <dramforever@live.com>
Signed-off-by: dram <dramforever@live.com>
Co-developed-by: Ruizhe Pan <c141028@gmail.com>
Signed-off-by: Ruizhe Pan <c141028@gmail.com>
Signed-off-by: Celeste Liu <coelacanthus@outlook.com>
Link: https://lore.kernel.org/r/PH7PR14MB559464DBDD310E755F5B21E8CEDC9@PH7PR14MB5594.namprd14.prod.outlook.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/sys_riscv.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c
index 12f8a7fce78b..8a7880b9c433 100644
--- a/arch/riscv/kernel/sys_riscv.c
+++ b/arch/riscv/kernel/sys_riscv.c
@@ -18,9 +18,8 @@ static long riscv_sys_mmap(unsigned long addr, unsigned long len,
 	if (unlikely(offset & (~PAGE_MASK >> page_shift_offset)))
 		return -EINVAL;
 
-	if ((prot & PROT_WRITE) && (prot & PROT_EXEC))
-		if (unlikely(!(prot & PROT_READ)))
-			return -EINVAL;
+	if (unlikely((prot & PROT_WRITE) && !(prot & PROT_READ)))
+		return -EINVAL;
 
 	return ksys_mmap_pgoff(addr, len, prot, flags, fd,
 			       offset >> (PAGE_SHIFT - page_shift_offset));
-- 
2.35.1

[PATCH AUTOSEL 5.18 15/39] RISC-V: Add fast call path of crash_kexec()

[Sasha Levin]

From: Xianting Tian <xianting.tian@linux.alibaba.com>

[ Upstream commit 3f1901110a89b0e2e13adb2ac8d1a7102879ea98 ]

Currently, almost all archs (x86, arm64, mips...) support fast call
of crash_kexec() when "regs && kexec_should_crash()" is true. But
RISC-V not, it can only enter crash system via panic(). However panic()
doesn't pass the regs of the real accident scene to crash_kexec(),
it caused we can't get accurate backtrace via gdb,
	$ riscv64-linux-gnu-gdb vmlinux vmcore
	Reading symbols from vmlinux...
	[New LWP 95]
	#0  console_unlock () at kernel/printk/printk.c:2557
	2557                    if (do_cond_resched)
	(gdb) bt
	#0  console_unlock () at kernel/printk/printk.c:2557
	#1  0x0000000000000000 in ?? ()

With the patch we can get the accurate backtrace,
	$ riscv64-linux-gnu-gdb vmlinux vmcore
	Reading symbols from vmlinux...
	[New LWP 95]
	#0  0xffffffe00063a4e0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81
	81             *(int *)p = 0xdead;
	(gdb)
	(gdb) bt
	#0  0xffffffe00064d5c0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81
	#1  0x0000000000000000 in ?? ()

Test code to produce NULL address dereference in test_crash.c,
	void *p = NULL;
	*(int *)p = 0xdead;

Reviewed-by: Guo Ren <guoren@kernel.org>
Tested-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220606082308.2883458-1-xianting.tian@linux.alibaba.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/traps.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index fe92e119e6a3..e666ebfa2a64 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -16,6 +16,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/irq.h>
+#include <linux/kexec.h>
 
 #include <asm/asm-prototypes.h>
 #include <asm/bug.h>
@@ -44,6 +45,9 @@ void die(struct pt_regs *regs, const char *str)
 
 	ret = notify_die(DIE_OOPS, str, regs, 0, regs->cause, SIGSEGV);
 
+	if (regs && kexec_should_crash(current))
+		crash_kexec(regs);
+
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
 	spin_unlock_irq(&die_lock);
-- 
2.35.1

[PATCH AUTOSEL 5.18 16/39] ALSA: hda/realtek: Enable speaker and mute LEDs for HP laptops

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit c578d5da10dc429c6676ab09f3fec0b79b31633a ]

Two more HP laptops that use cs35l41 AMP for speaker and GPIO for mute
LEDs.

So use the existing quirk to enable them accordingly.

[ Sort the entries at the SSID order by tiwai ]

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220719142015.244426-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index b7f1f2fb60cb..ebd970961e00 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9166,6 +9166,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x8aa3, "HP ProBook 450 G9 (MB 8AA1)", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8aa8, "HP EliteBook 640 G9 (MB 8AA6)", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8aab, "HP EliteBook 650 G9 (MB 8AA9)", ALC236_FIXUP_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x8ad1, "HP EliteBook 840 14 inch G9 Notebook PC", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x8ad2, "HP EliteBook 860 16 inch G9 Notebook PC", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300),
 	SND_PCI_QUIRK(0x1043, 0x106d, "Asus K53BE", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
-- 
2.35.1

[PATCH AUTOSEL 5.18 17/39] ASoC: SOF: Intel: hda: add sanity check on SSP index reported by NHLT

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit e51699505042fb365df3a0ce68b850ccd9ad0108 ]

We should have a limited trust in the BIOS and verify that the SSP
index reported in NHLT is valid for each platform.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220725195343.145603-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/intel/hda.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 9c97c80a7f48..b688caa34774 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -1375,6 +1375,7 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev)
 
 		if (mach->tplg_quirk_mask & SND_SOC_ACPI_TPLG_INTEL_SSP_NUMBER &&
 		    mach->mach_params.i2s_link_mask) {
+			const struct sof_intel_dsp_desc *chip = get_chip_info(sdev->pdata);
 			int ssp_num;
 
 			if (hweight_long(mach->mach_params.i2s_link_mask) > 1 &&
@@ -1384,6 +1385,12 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev)
 			/* fls returns 1-based results, SSPs indices are 0-based */
 			ssp_num = fls(mach->mach_params.i2s_link_mask) - 1;
 
+			if (ssp_num >= chip->ssp_count) {
+				dev_err(sdev->dev, "Invalid SSP %d, max on this platform is %d\n",
+					ssp_num, chip->ssp_count);
+				return NULL;
+			}
+
 			tplg_filename = devm_kasprintf(sdev->dev, GFP_KERNEL,
 						       "%s%s%d",
 						       sof_pdata->tplg_filename,
-- 
2.35.1

[PATCH AUTOSEL 5.18 18/39] ASoC: Intel: sof_es8336: Fix GPIO quirks set via module option

[Sasha Levin]

From: Andrey Turkin <andrey.turkin@gmail.com>

[ Upstream commit 5e60f1cfb830342304200437121f440b72b54f54 ]

The two GPIO quirk bits only affected actual GPIO selection
when set by the quirks table. They were reported as being
in effect when set via module options but actually did nothing.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrey Turkin <andrey.turkin@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220725194909.145418-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_es8336.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c
index 9d617831dd20..81e12f03ec97 100644
--- a/sound/soc/intel/boards/sof_es8336.c
+++ b/sound/soc/intel/boards/sof_es8336.c
@@ -77,8 +77,6 @@ static const struct acpi_gpio_mapping acpi_enable_both_gpios_rev_order[] = {
 	{ }
 };
 
-static const struct acpi_gpio_mapping *gpio_mapping = acpi_speakers_enable_gpio0;
-
 static void log_quirks(struct device *dev)
 {
 	dev_info(dev, "quirk mask %#lx\n", quirk);
@@ -272,15 +270,6 @@ static int sof_es8336_quirk_cb(const struct dmi_system_id *id)
 {
 	quirk = (unsigned long)id->driver_data;
 
-	if (quirk & SOF_ES8336_HEADPHONE_GPIO) {
-		if (quirk & SOF_ES8336_SPEAKERS_EN_GPIO1_QUIRK)
-			gpio_mapping = acpi_enable_both_gpios;
-		else
-			gpio_mapping = acpi_enable_both_gpios_rev_order;
-	} else if (quirk & SOF_ES8336_SPEAKERS_EN_GPIO1_QUIRK) {
-		gpio_mapping = acpi_speakers_enable_gpio1;
-	}
-
 	return 1;
 }
 
@@ -529,6 +518,7 @@ static int sof_es8336_probe(struct platform_device *pdev)
 	struct acpi_device *adev;
 	struct snd_soc_dai_link *dai_links;
 	struct device *codec_dev;
+	const struct acpi_gpio_mapping *gpio_mapping;
 	unsigned int cnt = 0;
 	int dmic_be_num = 0;
 	int hdmi_num = 3;
@@ -635,6 +625,17 @@ static int sof_es8336_probe(struct platform_device *pdev)
 	}
 
 	/* get speaker enable GPIO */
+	if (quirk & SOF_ES8336_HEADPHONE_GPIO) {
+		if (quirk & SOF_ES8336_SPEAKERS_EN_GPIO1_QUIRK)
+			gpio_mapping = acpi_enable_both_gpios;
+		else
+			gpio_mapping = acpi_enable_both_gpios_rev_order;
+	} else if (quirk & SOF_ES8336_SPEAKERS_EN_GPIO1_QUIRK) {
+		gpio_mapping = acpi_speakers_enable_gpio1;
+	} else {
+		gpio_mapping = acpi_speakers_enable_gpio0;
+	}
+
 	ret = devm_acpi_dev_add_driver_gpios(codec_dev, gpio_mapping);
 	if (ret)
 		dev_warn(codec_dev, "unable to add GPIO mapping table\n");
-- 
2.35.1

[PATCH AUTOSEL 5.18 19/39] ASoC: Intel: sof_es8336: ignore GpioInt when looking for speaker/headset GPIO lines

[Sasha Levin]

From: Andrey Turkin <andrey.turkin@gmail.com>

[ Upstream commit 751e77011f7a43a204bf2a5d02fbf5f8219bc531 ]

This fixes speaker GPIO detection on machines those ACPI tables
list their jack detection GpioInt before output GpioIo.
GpioInt entry can never be the speaker/headphone amplifier control
so it makes sense to only look for GpioIo entries when looking for them.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrey Turkin <andrey.turkin@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220725194909.145418-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_es8336.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c
index 81e12f03ec97..dade1749c444 100644
--- a/sound/soc/intel/boards/sof_es8336.c
+++ b/sound/soc/intel/boards/sof_es8336.c
@@ -57,23 +57,23 @@ static const struct acpi_gpio_params enable_gpio0 = { 0, 0, true };
 static const struct acpi_gpio_params enable_gpio1 = { 1, 0, true };
 
 static const struct acpi_gpio_mapping acpi_speakers_enable_gpio0[] = {
-	{ "speakers-enable-gpios", &enable_gpio0, 1 },
+	{ "speakers-enable-gpios", &enable_gpio0, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
 	{ }
 };
 
 static const struct acpi_gpio_mapping acpi_speakers_enable_gpio1[] = {
-	{ "speakers-enable-gpios", &enable_gpio1, 1 },
+	{ "speakers-enable-gpios", &enable_gpio1, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
 };
 
 static const struct acpi_gpio_mapping acpi_enable_both_gpios[] = {
-	{ "speakers-enable-gpios", &enable_gpio0, 1 },
-	{ "headphone-enable-gpios", &enable_gpio1, 1 },
+	{ "speakers-enable-gpios", &enable_gpio0, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
+	{ "headphone-enable-gpios", &enable_gpio1, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
 	{ }
 };
 
 static const struct acpi_gpio_mapping acpi_enable_both_gpios_rev_order[] = {
-	{ "speakers-enable-gpios", &enable_gpio1, 1 },
-	{ "headphone-enable-gpios", &enable_gpio0, 1 },
+	{ "speakers-enable-gpios", &enable_gpio1, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
+	{ "headphone-enable-gpios", &enable_gpio0, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
 	{ }
 };
 
-- 
2.35.1

[PATCH AUTOSEL 5.18 20/39] ASoC: Intel: sof_nau8825: Move quirk check to the front in late probe

[Sasha Levin]

From: Yong Zhi <yong.zhi@intel.com>

[ Upstream commit 5b56db90bbaf9d8581e5e6268727d8ad706555e4 ]

The sof_rt5682_quirk check was placed in the middle of
hdmi handling code, move it to the front to be consistent
with sof_rt5682.c/sof_card_late_probe().

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220725194909.145418-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/sof_nau8825.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/intel/boards/sof_nau8825.c b/sound/soc/intel/boards/sof_nau8825.c
index 33de043b66c6..b6826d6572b8 100644
--- a/sound/soc/intel/boards/sof_nau8825.c
+++ b/sound/soc/intel/boards/sof_nau8825.c
@@ -177,11 +177,6 @@ static int sof_card_late_probe(struct snd_soc_card *card)
 	struct sof_hdmi_pcm *pcm;
 	int err;
 
-	if (list_empty(&ctx->hdmi_pcm_list))
-		return -EINVAL;
-
-	pcm = list_first_entry(&ctx->hdmi_pcm_list, struct sof_hdmi_pcm, head);
-
 	if (sof_nau8825_quirk & SOF_MAX98373_SPEAKER_AMP_PRESENT) {
 		/* Disable Left and Right Spk pin after boot */
 		snd_soc_dapm_disable_pin(dapm, "Left Spk");
@@ -191,6 +186,11 @@ static int sof_card_late_probe(struct snd_soc_card *card)
 			return err;
 	}
 
+	if (list_empty(&ctx->hdmi_pcm_list))
+		return -EINVAL;
+
+	pcm = list_first_entry(&ctx->hdmi_pcm_list, struct sof_hdmi_pcm, head);
+
 	return hda_dsp_hdmi_build_controls(card, pcm->codec_dai->component);
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.18 21/39] watchdog: export lockup_detector_reconfigure

[Sasha Levin]

From: Laurent Dufour <ldufour@linux.ibm.com>

[ Upstream commit 7c56a8733d0a2a4be2438a7512566e5ce552fccf ]

In some circumstances it may be interesting to reconfigure the watchdog
from inside the kernel.

On PowerPC, this may helpful before and after a LPAR migration (LPM) is
initiated, because it implies some latencies, watchdog, and especially NMI
watchdog is expected to be triggered during this operation. Reconfiguring
the watchdog with a factor, would prevent it to happen too frequently
during LPM.

Rename lockup_detector_reconfigure() as __lockup_detector_reconfigure() and
create a new function lockup_detector_reconfigure() calling
__lockup_detector_reconfigure() under the protection of watchdog_mutex.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[mpe: Squash in build fix from Laurent, reported by Sachin]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-3-ldufour@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/nmi.h |  2 ++
 kernel/watchdog.c   | 21 ++++++++++++++++-----
 2 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 750c7f395ca9..f700ff2df074 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -122,6 +122,8 @@ int watchdog_nmi_probe(void);
 int watchdog_nmi_enable(unsigned int cpu);
 void watchdog_nmi_disable(unsigned int cpu);
 
+void lockup_detector_reconfigure(void);
+
 /**
  * touch_nmi_watchdog - restart NMI watchdog timeout.
  *
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 9166220457bc..65b3808a8334 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -537,7 +537,7 @@ int lockup_detector_offline_cpu(unsigned int cpu)
 	return 0;
 }
 
-static void lockup_detector_reconfigure(void)
+static void __lockup_detector_reconfigure(void)
 {
 	cpus_read_lock();
 	watchdog_nmi_stop();
@@ -557,6 +557,13 @@ static void lockup_detector_reconfigure(void)
 	__lockup_detector_cleanup();
 }
 
+void lockup_detector_reconfigure(void)
+{
+	mutex_lock(&watchdog_mutex);
+	__lockup_detector_reconfigure();
+	mutex_unlock(&watchdog_mutex);
+}
+
 /*
  * Create the watchdog infrastructure and configure the detector(s).
  */
@@ -573,13 +580,13 @@ static __init void lockup_detector_setup(void)
 		return;
 
 	mutex_lock(&watchdog_mutex);
-	lockup_detector_reconfigure();
+	__lockup_detector_reconfigure();
 	softlockup_initialized = true;
 	mutex_unlock(&watchdog_mutex);
 }
 
 #else /* CONFIG_SOFTLOCKUP_DETECTOR */
-static void lockup_detector_reconfigure(void)
+static void __lockup_detector_reconfigure(void)
 {
 	cpus_read_lock();
 	watchdog_nmi_stop();
@@ -587,9 +594,13 @@ static void lockup_detector_reconfigure(void)
 	watchdog_nmi_start();
 	cpus_read_unlock();
 }
+void lockup_detector_reconfigure(void)
+{
+	__lockup_detector_reconfigure();
+}
 static inline void lockup_detector_setup(void)
 {
-	lockup_detector_reconfigure();
+	__lockup_detector_reconfigure();
 }
 #endif /* !CONFIG_SOFTLOCKUP_DETECTOR */
 
@@ -629,7 +640,7 @@ static void proc_watchdog_update(void)
 {
 	/* Remove impossible cpus to keep sysctl output clean. */
 	cpumask_and(&watchdog_cpumask, &watchdog_cpumask, cpu_possible_mask);
-	lockup_detector_reconfigure();
+	__lockup_detector_reconfigure();
 }
 
 /*
-- 
2.35.1

[PATCH AUTOSEL 5.18 22/39] powerpc/watchdog: introduce a NMI watchdog's factor

[Sasha Levin]

From: Laurent Dufour <ldufour@linux.ibm.com>

[ Upstream commit f5e74e836097d1004077390717d4bd95d4a2c27a ]

Introduce a factor which would apply to the NMI watchdog timeout.

This factor is a percentage added to the watchdog_tresh value. The value is
set under the watchdog_mutex protection and lockup_detector_reconfigure()
is called to recompute wd_panic_timeout_tb.

Once the factor is set, it remains until it is set back to 0, which means
no impact.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-4-ldufour@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/nmi.h |  2 ++
 arch/powerpc/kernel/watchdog.c | 21 ++++++++++++++++++++-
 2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/nmi.h b/arch/powerpc/include/asm/nmi.h
index ea0e487f87b1..c3c7adef74de 100644
--- a/arch/powerpc/include/asm/nmi.h
+++ b/arch/powerpc/include/asm/nmi.h
@@ -5,8 +5,10 @@
 #ifdef CONFIG_PPC_WATCHDOG
 extern void arch_touch_nmi_watchdog(void);
 long soft_nmi_interrupt(struct pt_regs *regs);
+void watchdog_nmi_set_timeout_pct(u64 pct);
 #else
 static inline void arch_touch_nmi_watchdog(void) {}
+static inline void watchdog_nmi_set_timeout_pct(u64 pct) {}
 #endif
 
 #ifdef CONFIG_NMI_IPI
diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index bfc27496fe7e..1d0fe8e9c900 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -91,6 +91,10 @@ static cpumask_t wd_smp_cpus_pending;
 static cpumask_t wd_smp_cpus_stuck;
 static u64 wd_smp_last_reset_tb;
 
+#ifdef CONFIG_PPC_PSERIES
+static u64 wd_timeout_pct;
+#endif
+
 /*
  * Try to take the exclusive watchdog action / NMI IPI / printing lock.
  * wd_smp_lock must be held. If this fails, we should return and wait
@@ -527,7 +531,13 @@ static int stop_watchdog_on_cpu(unsigned int cpu)
 
 static void watchdog_calc_timeouts(void)
 {
-	wd_panic_timeout_tb = watchdog_thresh * ppc_tb_freq;
+	u64 threshold = watchdog_thresh;
+
+#ifdef CONFIG_PPC_PSERIES
+	threshold += (READ_ONCE(wd_timeout_pct) * threshold) / 100;
+#endif
+
+	wd_panic_timeout_tb = threshold * ppc_tb_freq;
 
 	/* Have the SMP detector trigger a bit later */
 	wd_smp_panic_timeout_tb = wd_panic_timeout_tb * 3 / 2;
@@ -570,3 +580,12 @@ int __init watchdog_nmi_probe(void)
 	}
 	return 0;
 }
+
+#ifdef CONFIG_PPC_PSERIES
+void watchdog_nmi_set_timeout_pct(u64 pct)
+{
+	pr_info("Set the NMI watchdog timeout factor to %llu%%\n", pct);
+	WRITE_ONCE(wd_timeout_pct, pct);
+	lockup_detector_reconfigure();
+}
+#endif
-- 
2.35.1

[PATCH AUTOSEL 5.18 23/39] powerpc/pseries/mobility: set NMI watchdog factor during an LPM

[Sasha Levin]

From: Laurent Dufour <ldufour@linux.ibm.com>

[ Upstream commit 118b1366930c8c833b8b36abef657f40d4e26610 ]

During an LPM, while the memory transfer is in progress on the arrival
side, some latencies are generated when accessing not yet transferred
pages on the arrival side. Thus, the NMI watchdog may be triggered too
frequently, which increases the risk to hit an NMI interrupt in a bad
place in the kernel, leading to a kernel panic.

Disabling the Hard Lockup Watchdog until the memory transfer could be a
too strong work around, some users would want this timeout to be
eventually triggered if the system is hanging even during an LPM.

Introduce a new sysctl variable nmi_watchdog_factor. It allows to apply
a factor to the NMI watchdog timeout during an LPM. Just before the CPUs
are stopped for the switchover sequence, the NMI watchdog timer is set
to watchdog_thresh + factor%

A value of 0 has no effect. The default value is 200, meaning that the
NMI watchdog is set to 30s during LPM (based on a 10s watchdog_thresh
value). Once the memory transfer is achieved, the factor is reset to 0.

Setting this value to a high number is like disabling the NMI watchdog
during an LPM.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-5-ldufour@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/admin-guide/sysctl/kernel.rst | 12 ++++++
 arch/powerpc/platforms/pseries/mobility.c   | 43 +++++++++++++++++++++
 2 files changed, 55 insertions(+)

diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index e9c18dabc552..fc9e6565ced0 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -592,6 +592,18 @@ to the guest kernel command line (see
 Documentation/admin-guide/kernel-parameters.rst).
 
 
+nmi_wd_lpm_factor (PPC only)
+============================
+
+Factor to apply to the NMI watchdog timeout (only when ``nmi_watchdog`` is
+set to 1). This factor represents the percentage added to
+``watchdog_thresh`` when calculating the NMI watchdog timeout during an
+LPM. The soft lockup timeout is not impacted.
+
+A value of 0 means no change. The default value is 200 meaning the NMI
+watchdog is set to 30s (based on ``watchdog_thresh`` equal to 10).
+
+
 numa_balancing
 ==============
 
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 78f3f74c7056..cbe0989239bf 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -48,6 +48,39 @@ struct update_props_workarea {
 #define MIGRATION_SCOPE	(1)
 #define PRRN_SCOPE -2
 
+#ifdef CONFIG_PPC_WATCHDOG
+static unsigned int nmi_wd_lpm_factor = 200;
+
+#ifdef CONFIG_SYSCTL
+static struct ctl_table nmi_wd_lpm_factor_ctl_table[] = {
+	{
+		.procname	= "nmi_wd_lpm_factor",
+		.data		= &nmi_wd_lpm_factor,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_douintvec_minmax,
+	},
+	{}
+};
+static struct ctl_table nmi_wd_lpm_factor_sysctl_root[] = {
+	{
+		.procname       = "kernel",
+		.mode           = 0555,
+		.child          = nmi_wd_lpm_factor_ctl_table,
+	},
+	{}
+};
+
+static int __init register_nmi_wd_lpm_factor_sysctl(void)
+{
+	register_sysctl_table(nmi_wd_lpm_factor_sysctl_root);
+
+	return 0;
+}
+device_initcall(register_nmi_wd_lpm_factor_sysctl);
+#endif /* CONFIG_SYSCTL */
+#endif /* CONFIG_PPC_WATCHDOG */
+
 static int mobility_rtas_call(int token, char *buf, s32 scope)
 {
 	int rc;
@@ -665,19 +698,29 @@ static int pseries_suspend(u64 handle)
 static int pseries_migrate_partition(u64 handle)
 {
 	int ret;
+	unsigned int factor = 0;
 
+#ifdef CONFIG_PPC_WATCHDOG
+	factor = nmi_wd_lpm_factor;
+#endif
 	ret = wait_for_vasi_session_suspending(handle);
 	if (ret)
 		return ret;
 
 	vas_migration_handler(VAS_SUSPEND);
 
+	if (factor)
+		watchdog_nmi_set_timeout_pct(factor);
+
 	ret = pseries_suspend(handle);
 	if (ret == 0)
 		post_mobility_fixup();
 	else
 		pseries_cancel_migration(handle, ret);
 
+	if (factor)
+		watchdog_nmi_set_timeout_pct(0);
+
 	vas_migration_handler(VAS_RESUME);
 
 	return ret;
-- 
2.35.1

[PATCH AUTOSEL 5.18 24/39] powerpc/32: Set an IBAT covering up to _einittext during init

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 2a0fb3c155c97c75176e557d61f8e66c1bd9b735 ]

Always set an IBAT covering up to _einittext during init because when
CONFIG_MODULES is not selected there is no reason to have an exception
handler for kernel instruction TLB misses.

It implies DBAT and IBAT are now totaly independent, IBATs are set
by setibat() and DBAT by setbat().

This allows to revert commit 9bb162fa26ed ("powerpc/603: Fix
boot failure with DEBUG_PAGEALLOC and KFENCE")

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ce7f04a39593934d9b1ee68c69144ccd3d4da4a1.1655202804.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/head_book3s_32.S |  4 ++--
 arch/powerpc/mm/book3s32/mmu.c       | 10 ++++------
 2 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
index 6c739beb938c..519b60695167 100644
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -418,14 +418,14 @@ InstructionTLBMiss:
  */
 	/* Get PTE (linux-style) and check access */
 	mfspr	r3,SPRN_IMISS
-#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE)
+#ifdef CONFIG_MODULES
 	lis	r1, TASK_SIZE@h		/* check if kernel address */
 	cmplw	0,r1,r3
 #endif
 	mfspr	r2, SPRN_SDR1
 	li	r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC | _PAGE_USER
 	rlwinm	r2, r2, 28, 0xfffff000
-#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE)
+#ifdef CONFIG_MODULES
 	bgt-	112f
 	lis	r2, (swapper_pg_dir - PAGE_OFFSET)@ha	/* if kernel address, use */
 	li	r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c
index 203735caf691..bfca0afe9112 100644
--- a/arch/powerpc/mm/book3s32/mmu.c
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -160,7 +160,10 @@ unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top)
 {
 	unsigned long done;
 	unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET;
+	unsigned long size;
 
+	size = roundup_pow_of_two((unsigned long)_einittext - PAGE_OFFSET);
+	setibat(0, PAGE_OFFSET, 0, size, PAGE_KERNEL_X);
 
 	if (debug_pagealloc_enabled_or_kfence() || __map_without_bats) {
 		pr_debug_once("Read-Write memory mapped without BATs\n");
@@ -246,10 +249,9 @@ void mmu_mark_rodata_ro(void)
 }
 
 /*
- * Set up one of the I/D BAT (block address translation) register pairs.
+ * Set up one of the D BAT (block address translation) register pairs.
  * The parameters are not checked; in particular size must be a power
  * of 2 between 128k and 256M.
- * On 603+, only set IBAT when _PAGE_EXEC is set
  */
 void __init setbat(int index, unsigned long virt, phys_addr_t phys,
 		   unsigned int size, pgprot_t prot)
@@ -285,10 +287,6 @@ void __init setbat(int index, unsigned long virt, phys_addr_t phys,
 		/* G bit must be zero in IBATs */
 		flags &= ~_PAGE_EXEC;
 	}
-	if (flags & _PAGE_EXEC)
-		bat[0] = bat[1];
-	else
-		bat[0].batu = bat[0].batl = 0;
 
 	bat_addrs[index].start = virt;
 	bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1;
-- 
2.35.1

[PATCH AUTOSEL 5.18 25/39] powerpc/32: Don't always pass -mcpu=powerpc to the compiler

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@csgroup.eu>

[ Upstream commit 446cda1b21d9a6b3697fe399c6a3a00ff4a285f5 ]

Since commit 4bf4f42a2feb ("powerpc/kbuild: Set default generic
machine type for 32-bit compile"), when building a 32 bits kernel
with a bi-arch version of GCC, or when building a book3s/32 kernel,
the option -mcpu=powerpc is passed to GCC at all time, relying on it
being eventually overriden by a subsequent -mcpu=xxxx.

But when building the same kernel with a 32 bits only version of GCC,
that is not done, relying on gcc being built with the expected default
CPU.

This logic has two problems. First, it is a bit fragile to rely on
whether the GCC version is bi-arch or not, because today we can have
bi-arch versions of GCC configured with a 32 bits default. Second,
there are some versions of GCC which don't support -mcpu=powerpc,
for instance for e500 SPE-only versions.

So, stop relying on this approximative logic and allow the user to
decide whether he/she wants to use the toolchain's default CPU or if
he/she wants to set one, and allow only possible CPUs based on the
selected target.

Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d4df724691351531bf46d685d654689e5dfa0d74.1657549153.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/Makefile                  | 26 +-------------------------
 arch/powerpc/platforms/Kconfig.cputype | 21 ++++++++++++++++++---
 2 files changed, 19 insertions(+), 28 deletions(-)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index eb541e730d3c..299fd2de9c01 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -15,23 +15,6 @@ HAS_BIARCH	:= $(call cc-option-yn, -m32)
 # Set default 32 bits cross compilers for vdso and boot wrapper
 CROSS32_COMPILE ?=
 
-ifeq ($(HAS_BIARCH),y)
-ifeq ($(CROSS32_COMPILE),)
-ifdef CONFIG_PPC32
-# These options will be overridden by any -mcpu option that the CPU
-# or platform code sets later on the command line, but they are needed
-# to set a sane 32-bit cpu target for the 64-bit cross compiler which
-# may default to the wrong ISA.
-KBUILD_CFLAGS		+= -mcpu=powerpc
-KBUILD_AFLAGS		+= -mcpu=powerpc
-endif
-endif
-endif
-
-ifdef CONFIG_PPC_BOOK3S_32
-KBUILD_CFLAGS		+= -mcpu=powerpc
-endif
-
 # If we're on a ppc/ppc64/ppc64le machine use that defconfig, otherwise just use
 # ppc64_defconfig because we have nothing better to go on.
 uname := $(shell uname -m)
@@ -183,6 +166,7 @@ endif
 endif
 
 CFLAGS-$(CONFIG_TARGET_CPU_BOOL) += $(call cc-option,-mcpu=$(CONFIG_TARGET_CPU))
+AFLAGS-$(CONFIG_TARGET_CPU_BOOL) += $(call cc-option,-mcpu=$(CONFIG_TARGET_CPU))
 
 # Altivec option not allowed with e500mc64 in GCC.
 ifdef CONFIG_ALTIVEC
@@ -193,14 +177,6 @@ endif
 CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU)
 CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU))
 
-ifdef CONFIG_PPC32
-ifdef CONFIG_PPC_E500MC
-CFLAGS-y += $(call cc-option,-mcpu=e500mc,-mcpu=powerpc)
-else
-CFLAGS-$(CONFIG_E500) += $(call cc-option,-mcpu=8540 -msoft-float,-mcpu=powerpc)
-endif
-endif
-
 asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
 
 KBUILD_CPPFLAGS	+= -I $(srctree)/arch/$(ARCH) $(asinstr)
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index e2e1fec91c6e..ee89646445c5 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -135,9 +135,9 @@ config GENERIC_CPU
 	select ARCH_HAS_FAST_MULTIPLIER
 	select PPC_64S_HASH_MMU
 
-config GENERIC_CPU
+config POWERPC_CPU
 	bool "Generic 32 bits powerpc"
-	depends on PPC32 && !PPC_8xx
+	depends on PPC32 && !PPC_8xx && !PPC_85xx
 
 config CELL_CPU
 	bool "Cell Broadband Engine"
@@ -196,11 +196,23 @@ config G4_CPU
 	depends on PPC_BOOK3S_32
 	select ALTIVEC
 
+config E500_CPU
+	bool "e500 (8540)"
+	depends on PPC_85xx && !PPC_E500MC
+
+config E500MC_CPU
+	bool "e500mc"
+	depends on PPC_85xx && PPC_E500MC
+
+config TOOLCHAIN_DEFAULT_CPU
+	bool "Rely on the toolchain's implicit default CPU"
+	depends on PPC32
+
 endchoice
 
 config TARGET_CPU_BOOL
 	bool
-	default !GENERIC_CPU
+	default !GENERIC_CPU && !TOOLCHAIN_DEFAULT_CPU
 
 config TARGET_CPU
 	string
@@ -215,6 +227,9 @@ config TARGET_CPU
 	default "e300c2" if E300C2_CPU
 	default "e300c3" if E300C3_CPU
 	default "G4" if G4_CPU
+	default "8540" if E500_CPU
+	default "e500mc" if E500MC_CPU
+	default "powerpc" if POWERPC_CPU
 
 config PPC_BOOK3S
 	def_bool y
-- 
2.35.1

[PATCH AUTOSEL 5.18 26/39] ASoC: codecs: va-macro: use fsgen as clock

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 30097967e0566cac817273ef76add100f6b0f463 ]

VA Macro fsgen clock is supplied to other LPASS Macros using proper
clock apis, however the internal user uses the registers directly without
clk apis. This approch has race condition where in external users of
the clock might cut the clock while VA macro is actively using this.

Moving the internal usage to clk apis would provide a proper refcounting
and avoid such race conditions.

This issue was noticed while headset was pulled out while recording is
in progress and shifting record patch to DMIC.

Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/20220727124749.4604-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/lpass-va-macro.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/lpass-va-macro.c b/sound/soc/codecs/lpass-va-macro.c
index d18b56e60433..1ea10dc70748 100644
--- a/sound/soc/codecs/lpass-va-macro.c
+++ b/sound/soc/codecs/lpass-va-macro.c
@@ -199,6 +199,7 @@ struct va_macro {
 	struct clk *mclk;
 	struct clk *macro;
 	struct clk *dcodec;
+	struct clk *fsgen;
 	struct clk_hw hw;
 	struct lpass_macro *pds;
 
@@ -467,9 +468,9 @@ static int va_macro_mclk_event(struct snd_soc_dapm_widget *w,
 
 	switch (event) {
 	case SND_SOC_DAPM_PRE_PMU:
-		return va_macro_mclk_enable(va, true);
+		return clk_prepare_enable(va->fsgen);
 	case SND_SOC_DAPM_POST_PMD:
-		return va_macro_mclk_enable(va, false);
+		clk_disable_unprepare(va->fsgen);
 	}
 
 	return 0;
@@ -1473,6 +1474,12 @@ static int va_macro_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_clkout;
 
+	va->fsgen = clk_hw_get_clk(&va->hw, "fsgen");
+	if (IS_ERR(va->fsgen)) {
+		ret = PTR_ERR(va->fsgen);
+		goto err_clkout;
+	}
+
 	ret = devm_snd_soc_register_component(dev, &va_macro_component_drv,
 					      va_macro_dais,
 					      ARRAY_SIZE(va_macro_dais));
-- 
2.35.1

[PATCH AUTOSEL 5.18 27/39] ovl: warn if trusted xattr creation fails

[Sasha Levin]

From: Miklos Szeredi <mszeredi@redhat.com>

[ Upstream commit b10b85fe5149ee8b39fbbf86095b303632dde2cd ]

When mounting overlayfs in an unprivileged user namespace, trusted xattr
creation will fail.  This will lead to failures in some file operations,
e.g. in the following situation:

  mkdir lower upper work merged
  mkdir lower/directory
  mount -toverlay -olowerdir=lower,upperdir=upper,workdir=work none merged
  rmdir merged/directory
  mkdir merged/directory

The last mkdir will fail:

  mkdir: cannot create directory 'merged/directory': Input/output error

The cause for these failures is currently extremely non-obvious and hard to
debug.  Hence, warn the user and suggest using the userxattr mount option,
if it is not already supplied and xattr creation fails during the
self-check.

Reported-by: Alois Wohlschlager <alois1@gmx-topmail.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/overlayfs/super.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index 001cdbb8f015..f3c13eca5270 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -1413,11 +1413,12 @@ static int ovl_make_workdir(struct super_block *sb, struct ovl_fs *ofs,
 	 */
 	err = ovl_do_setxattr(ofs, ofs->workdir, OVL_XATTR_OPAQUE, "0", 1);
 	if (err) {
+		pr_warn("failed to set xattr on upper\n");
 		ofs->noxattr = true;
 		if (ofs->config.index || ofs->config.metacopy) {
 			ofs->config.index = false;
 			ofs->config.metacopy = false;
-			pr_warn("upper fs does not support xattr, falling back to index=off,metacopy=off.\n");
+			pr_warn("...falling back to index=off,metacopy=off.\n");
 		}
 		/*
 		 * xattr support is required for persistent st_ino.
@@ -1425,8 +1426,10 @@ static int ovl_make_workdir(struct super_block *sb, struct ovl_fs *ofs,
 		 */
 		if (ofs->config.xino == OVL_XINO_AUTO) {
 			ofs->config.xino = OVL_XINO_OFF;
-			pr_warn("upper fs does not support xattr, falling back to xino=off.\n");
+			pr_warn("...falling back to xino=off.\n");
 		}
+		if (err == -EPERM && !ofs->config.userxattr)
+			pr_info("try mounting with 'userxattr' option\n");
 		err = 0;
 	} else {
 		ovl_do_removexattr(ofs, ofs->workdir, OVL_XATTR_OPAQUE);
-- 
2.35.1

[PATCH AUTOSEL 5.18 28/39] powerpc/ioda/iommu/debugfs: Generate unique debugfs entries

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit d73b46c3c1449bf27f793b9d9ee86ed70c7a7163 ]

The iommu_table::it_index is a LIOBN which is not initialized on PowerNV
as it is not used except IOMMU debugfs where it is used for a node name.

This initializes it_index witn a unique number to avoid warnings and
have a node for every iommu_table.

This should not cause any behavioral change without CONFIG_IOMMU_DEBUGFS.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220714080800.3712998-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index b722ac902269..0f193772c6fa 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1618,6 +1618,7 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
 	tbl->it_ops = &pnv_ioda1_iommu_ops;
 	pe->table_group.tce32_start = tbl->it_offset << tbl->it_page_shift;
 	pe->table_group.tce32_size = tbl->it_size << tbl->it_page_shift;
+	tbl->it_index = (phb->hose->global_number << 16) | pe->pe_number;
 	if (!iommu_init_table(tbl, phb->hose->node, 0, 0))
 		panic("Failed to initialize iommu table");
 
@@ -1788,6 +1789,7 @@ static long pnv_pci_ioda2_setup_default_config(struct pnv_ioda_pe *pe)
 		res_end = min(window_size, SZ_4G) >> tbl->it_page_shift;
 	}
 
+	tbl->it_index = (pe->phb->hose->global_number << 16) | pe->pe_number;
 	if (iommu_init_table(tbl, pe->phb->hose->node, res_start, res_end))
 		rc = pnv_pci_ioda2_set_window(&pe->table_group, 0, tbl);
 	else
-- 
2.35.1

[PATCH AUTOSEL 5.18 29/39] ALSA: core: Add async signal helpers

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit ef34a0ae7a2654bc9e58675e36898217fb2799d8 ]

Currently the call of kill_fasync() from an interrupt handler might
lead to potential spin deadlocks, as spotted by syzkaller.
Unfortunately, it's not so trivial to fix this lock chain as it's
involved with the tasklist_lock that is touched in allover places.

As a temporary workaround, this patch provides the way to defer the
async signal notification in a work.  The new helper functions,
snd_fasync_helper() and snd_kill_faync() are replacements for
fasync_helper() and kill_fasync(), respectively.  In addition,
snd_fasync_free() needs to be called at the destructor of the relevant
file object.

Link: https://lore.kernel.org/r/20220728125945.29533-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/core.h |  8 ++++
 sound/core/misc.c    | 94 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 102 insertions(+)

diff --git a/include/sound/core.h b/include/sound/core.h
index 6d4cc49584c6..39cee40ac22e 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -501,4 +501,12 @@ snd_pci_quirk_lookup_id(u16 vendor, u16 device,
 }
 #endif
 
+/* async signal helpers */
+struct snd_fasync;
+
+int snd_fasync_helper(int fd, struct file *file, int on,
+		      struct snd_fasync **fasyncp);
+void snd_kill_fasync(struct snd_fasync *fasync, int signal, int poll);
+void snd_fasync_free(struct snd_fasync *fasync);
+
 #endif /* __SOUND_CORE_H */
diff --git a/sound/core/misc.c b/sound/core/misc.c
index 50e4aaa6270d..d32a19976a2b 100644
--- a/sound/core/misc.c
+++ b/sound/core/misc.c
@@ -10,6 +10,7 @@
 #include <linux/time.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
+#include <linux/fs.h>
 #include <sound/core.h>
 
 #ifdef CONFIG_SND_DEBUG
@@ -145,3 +146,96 @@ snd_pci_quirk_lookup(struct pci_dev *pci, const struct snd_pci_quirk *list)
 }
 EXPORT_SYMBOL(snd_pci_quirk_lookup);
 #endif
+
+/*
+ * Deferred async signal helpers
+ *
+ * Below are a few helper functions to wrap the async signal handling
+ * in the deferred work.  The main purpose is to avoid the messy deadlock
+ * around tasklist_lock and co at the kill_fasync() invocation.
+ * fasync_helper() and kill_fasync() are replaced with snd_fasync_helper()
+ * and snd_kill_fasync(), respectively.  In addition, snd_fasync_free() has
+ * to be called at releasing the relevant file object.
+ */
+struct snd_fasync {
+	struct fasync_struct *fasync;
+	int signal;
+	int poll;
+	int on;
+	struct list_head list;
+};
+
+static DEFINE_SPINLOCK(snd_fasync_lock);
+static LIST_HEAD(snd_fasync_list);
+
+static void snd_fasync_work_fn(struct work_struct *work)
+{
+	struct snd_fasync *fasync;
+
+	spin_lock_irq(&snd_fasync_lock);
+	while (!list_empty(&snd_fasync_list)) {
+		fasync = list_first_entry(&snd_fasync_list, struct snd_fasync, list);
+		list_del_init(&fasync->list);
+		spin_unlock_irq(&snd_fasync_lock);
+		if (fasync->on)
+			kill_fasync(&fasync->fasync, fasync->signal, fasync->poll);
+		spin_lock_irq(&snd_fasync_lock);
+	}
+	spin_unlock_irq(&snd_fasync_lock);
+}
+
+static DECLARE_WORK(snd_fasync_work, snd_fasync_work_fn);
+
+int snd_fasync_helper(int fd, struct file *file, int on,
+		      struct snd_fasync **fasyncp)
+{
+	struct snd_fasync *fasync = NULL;
+
+	if (on) {
+		fasync = kzalloc(sizeof(*fasync), GFP_KERNEL);
+		if (!fasync)
+			return -ENOMEM;
+		INIT_LIST_HEAD(&fasync->list);
+	}
+
+	spin_lock_irq(&snd_fasync_lock);
+	if (*fasyncp) {
+		kfree(fasync);
+		fasync = *fasyncp;
+	} else {
+		if (!fasync) {
+			spin_unlock_irq(&snd_fasync_lock);
+			return 0;
+		}
+		*fasyncp = fasync;
+	}
+	fasync->on = on;
+	spin_unlock_irq(&snd_fasync_lock);
+	return fasync_helper(fd, file, on, &fasync->fasync);
+}
+EXPORT_SYMBOL_GPL(snd_fasync_helper);
+
+void snd_kill_fasync(struct snd_fasync *fasync, int signal, int poll)
+{
+	unsigned long flags;
+
+	if (!fasync || !fasync->on)
+		return;
+	spin_lock_irqsave(&snd_fasync_lock, flags);
+	fasync->signal = signal;
+	fasync->poll = poll;
+	list_move(&fasync->list, &snd_fasync_list);
+	schedule_work(&snd_fasync_work);
+	spin_unlock_irqrestore(&snd_fasync_lock, flags);
+}
+EXPORT_SYMBOL_GPL(snd_kill_fasync);
+
+void snd_fasync_free(struct snd_fasync *fasync)
+{
+	if (!fasync)
+		return;
+	fasync->on = 0;
+	flush_work(&snd_fasync_work);
+	kfree(fasync);
+}
+EXPORT_SYMBOL_GPL(snd_fasync_free);
-- 
2.35.1

[PATCH AUTOSEL 5.18 30/39] ALSA: timer: Use deferred fasync helper

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 95cc637c1afd83fb7dd3d7c8a53710488f4caf9c ]

For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from PCI API.  Note that
it's merely a workaround.

Reported-by: syzbot+1ee0910eca9c94f71f25@syzkaller.appspotmail.com
Reported-by: syzbot+49b10793b867871ee26f@syzkaller.appspotmail.com
Reported-by: syzbot+8285e973a41b5aa68902@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220728125945.29533-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/timer.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/sound/core/timer.c b/sound/core/timer.c
index b3214baa8919..e08a37c23add 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -83,7 +83,7 @@ struct snd_timer_user {
 	unsigned int filter;
 	struct timespec64 tstamp;		/* trigger tstamp */
 	wait_queue_head_t qchange_sleep;
-	struct fasync_struct *fasync;
+	struct snd_fasync *fasync;
 	struct mutex ioctl_lock;
 };
 
@@ -1345,7 +1345,7 @@ static void snd_timer_user_interrupt(struct snd_timer_instance *timeri,
 	}
       __wake:
 	spin_unlock(&tu->qlock);
-	kill_fasync(&tu->fasync, SIGIO, POLL_IN);
+	snd_kill_fasync(tu->fasync, SIGIO, POLL_IN);
 	wake_up(&tu->qchange_sleep);
 }
 
@@ -1383,7 +1383,7 @@ static void snd_timer_user_ccallback(struct snd_timer_instance *timeri,
 	spin_lock_irqsave(&tu->qlock, flags);
 	snd_timer_user_append_to_tqueue(tu, &r1);
 	spin_unlock_irqrestore(&tu->qlock, flags);
-	kill_fasync(&tu->fasync, SIGIO, POLL_IN);
+	snd_kill_fasync(tu->fasync, SIGIO, POLL_IN);
 	wake_up(&tu->qchange_sleep);
 }
 
@@ -1453,7 +1453,7 @@ static void snd_timer_user_tinterrupt(struct snd_timer_instance *timeri,
 	spin_unlock(&tu->qlock);
 	if (append == 0)
 		return;
-	kill_fasync(&tu->fasync, SIGIO, POLL_IN);
+	snd_kill_fasync(tu->fasync, SIGIO, POLL_IN);
 	wake_up(&tu->qchange_sleep);
 }
 
@@ -1521,6 +1521,7 @@ static int snd_timer_user_release(struct inode *inode, struct file *file)
 			snd_timer_instance_free(tu->timeri);
 		}
 		mutex_unlock(&tu->ioctl_lock);
+		snd_fasync_free(tu->fasync);
 		kfree(tu->queue);
 		kfree(tu->tqueue);
 		kfree(tu);
@@ -2135,7 +2136,7 @@ static int snd_timer_user_fasync(int fd, struct file * file, int on)
 	struct snd_timer_user *tu;
 
 	tu = file->private_data;
-	return fasync_helper(fd, file, on, &tu->fasync);
+	return snd_fasync_helper(fd, file, on, &tu->fasync);
 }
 
 static ssize_t snd_timer_user_read(struct file *file, char __user *buffer,
-- 
2.35.1

[PATCH AUTOSEL 5.18 31/39] ALSA: pcm: Use deferred fasync helper

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 96b097091c66df4f6fbf5cbff21df6cc02a2f055 ]

For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from timer API.  Note that
it's merely a workaround.

Reported-by: syzbot+8285e973a41b5aa68902@syzkaller.appspotmail.com
Reported-by: syzbot+669c9abf11a6a011dd09@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220728125945.29533-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/pcm.h     | 2 +-
 sound/core/pcm.c        | 1 +
 sound/core/pcm_lib.c    | 2 +-
 sound/core/pcm_native.c | 2 +-
 4 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 6b99310b5b88..6987110843f0 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -399,7 +399,7 @@ struct snd_pcm_runtime {
 	snd_pcm_uframes_t twake; 	/* do transfer (!poll) wakeup if non-zero */
 	wait_queue_head_t sleep;	/* poll sleep */
 	wait_queue_head_t tsleep;	/* transfer sleep */
-	struct fasync_struct *fasync;
+	struct snd_fasync *fasync;
 	bool stop_operating;		/* sync_stop will be called */
 	struct mutex buffer_mutex;	/* protect for buffer changes */
 	atomic_t buffer_accessing;	/* >0: in r/w operation, <0: blocked */
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 977d54320a5c..c917ac84a7e5 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -1005,6 +1005,7 @@ void snd_pcm_detach_substream(struct snd_pcm_substream *substream)
 		substream->runtime = NULL;
 	}
 	mutex_destroy(&runtime->buffer_mutex);
+	snd_fasync_free(runtime->fasync);
 	kfree(runtime);
 	put_pid(substream->pid);
 	substream->pid = NULL;
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 1fc7c50ffa62..40751e5aff09 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1822,7 +1822,7 @@ void snd_pcm_period_elapsed_under_stream_lock(struct snd_pcm_substream *substrea
 		snd_timer_interrupt(substream->timer, 1);
 #endif
  _end:
-	kill_fasync(&runtime->fasync, SIGIO, POLL_IN);
+	snd_kill_fasync(runtime->fasync, SIGIO, POLL_IN);
 }
 EXPORT_SYMBOL(snd_pcm_period_elapsed_under_stream_lock);
 
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 4adaee62ef33..16fcf57c6f03 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -3945,7 +3945,7 @@ static int snd_pcm_fasync(int fd, struct file * file, int on)
 	runtime = substream->runtime;
 	if (runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED)
 		return -EBADFD;
-	return fasync_helper(fd, file, on, &runtime->fasync);
+	return snd_fasync_helper(fd, file, on, &runtime->fasync);
 }
 
 /*
-- 
2.35.1

[PATCH AUTOSEL 5.18 32/39] ALSA: control: Use deferred fasync helper

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 4a971e84a7ae10a38d875cd2d4e487c8d1682ca3 ]

For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from the control API.  Note
that it's merely a workaround.

Another note: although we haven't received reports about the deadlock
with the control API, the deadlock is still potentially possible, and
it's better to align the behavior with other core APIs (PCM and
timer); so let's move altogether.

Link: https://lore.kernel.org/r/20220728125945.29533-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/control.h | 2 +-
 sound/core/control.c    | 7 ++++---
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/include/sound/control.h b/include/sound/control.h
index 985c51a8fb74..a1fc7e0a47d9 100644
--- a/include/sound/control.h
+++ b/include/sound/control.h
@@ -109,7 +109,7 @@ struct snd_ctl_file {
 	int preferred_subdevice[SND_CTL_SUBDEV_ITEMS];
 	wait_queue_head_t change_sleep;
 	spinlock_t read_lock;
-	struct fasync_struct *fasync;
+	struct snd_fasync *fasync;
 	int subscribed;			/* read interface is activated */
 	struct list_head events;	/* waiting events for read */
 };
diff --git a/sound/core/control.c b/sound/core/control.c
index a25c0d64d104..f66fe4be30d3 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -127,6 +127,7 @@ static int snd_ctl_release(struct inode *inode, struct file *file)
 			if (control->vd[idx].owner == ctl)
 				control->vd[idx].owner = NULL;
 	up_write(&card->controls_rwsem);
+	snd_fasync_free(ctl->fasync);
 	snd_ctl_empty_read_queue(ctl);
 	put_pid(ctl->pid);
 	kfree(ctl);
@@ -181,7 +182,7 @@ void snd_ctl_notify(struct snd_card *card, unsigned int mask,
 	_found:
 		wake_up(&ctl->change_sleep);
 		spin_unlock(&ctl->read_lock);
-		kill_fasync(&ctl->fasync, SIGIO, POLL_IN);
+		snd_kill_fasync(ctl->fasync, SIGIO, POLL_IN);
 	}
 	read_unlock_irqrestore(&card->ctl_files_rwlock, flags);
 }
@@ -2002,7 +2003,7 @@ static int snd_ctl_fasync(int fd, struct file * file, int on)
 	struct snd_ctl_file *ctl;
 
 	ctl = file->private_data;
-	return fasync_helper(fd, file, on, &ctl->fasync);
+	return snd_fasync_helper(fd, file, on, &ctl->fasync);
 }
 
 /* return the preferred subdevice number if already assigned;
@@ -2170,7 +2171,7 @@ static int snd_ctl_dev_disconnect(struct snd_device *device)
 	read_lock_irqsave(&card->ctl_files_rwlock, flags);
 	list_for_each_entry(ctl, &card->ctl_files, list) {
 		wake_up(&ctl->change_sleep);
-		kill_fasync(&ctl->fasync, SIGIO, POLL_ERR);
+		snd_kill_fasync(ctl->fasync, SIGIO, POLL_ERR);
 	}
 	read_unlock_irqrestore(&card->ctl_files_rwlock, flags);
 
-- 
2.35.1

[PATCH AUTOSEL 5.18 33/39] f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()

[Sasha Levin]

From: Chao Yu <chao.yu@oppo.com>

[ Upstream commit 141170b759e03958f296033bb7001be62d1d363b ]

As Dipanjan Das <mail.dipanjan.das@gmail.com> reported, syzkaller
found a f2fs bug as below:

RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295
Call Trace:
 write_all_xattrs fs/f2fs/xattr.c:487 [inline]
 __f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743
 f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790
 f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86
 __vfs_setxattr+0x115/0x180 fs/xattr.c:182
 __vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216
 __vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277
 vfs_setxattr+0x13f/0x330 fs/xattr.c:303
 setxattr+0x146/0x160 fs/xattr.c:611
 path_setxattr+0x1a7/0x1d0 fs/xattr.c:630
 __do_sys_lsetxattr fs/xattr.c:653 [inline]
 __se_sys_lsetxattr fs/xattr.c:649 [inline]
 __x64_sys_lsetxattr+0xbd/0x150 fs/xattr.c:649
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

NAT entry and nat bitmap can be inconsistent, e.g. one nid is free
in nat bitmap, and blkaddr in its NAT entry is not NULL_ADDR, it
may trigger BUG_ON() in f2fs_new_node_page(), fix it.

Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/node.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index aedc3d334113..1cd89ce34418 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -1296,7 +1296,11 @@ struct page *f2fs_new_node_page(struct dnode_of_data *dn, unsigned int ofs)
 		dec_valid_node_count(sbi, dn->inode, !ofs);
 		goto fail;
 	}
-	f2fs_bug_on(sbi, new_ni.blk_addr != NULL_ADDR);
+	if (unlikely(new_ni.blk_addr != NULL_ADDR)) {
+		err = -EFSCORRUPTED;
+		set_sbi_flag(sbi, SBI_NEED_FSCK);
+		goto fail;
+	}
 #endif
 	new_ni.nid = dn->nid;
 	new_ni.ino = dn->inode->i_ino;
-- 
2.35.1

[PATCH AUTOSEL 5.18 34/39] f2fs: fix to do sanity check on segment type in build_sit_entries()

[Sasha Levin]

From: Chao Yu <chao.yu@oppo.com>

[ Upstream commit 09beadf289d6e300553e60d6e76f13c0427ecab3 ]

As Wenqing Liu <wenqingliu0120@gmail.com> reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=216285

RIP: 0010:memcpy_erms+0x6/0x10
 f2fs_update_meta_page+0x84/0x570 [f2fs]
 change_curseg.constprop.0+0x159/0xbd0 [f2fs]
 f2fs_do_replace_block+0x5c7/0x18a0 [f2fs]
 f2fs_replace_block+0xeb/0x180 [f2fs]
 recover_data+0x1abd/0x6f50 [f2fs]
 f2fs_recover_fsync_data+0x12ce/0x3250 [f2fs]
 f2fs_fill_super+0x4459/0x6190 [f2fs]
 mount_bdev+0x2cf/0x3b0
 legacy_get_tree+0xed/0x1d0
 vfs_get_tree+0x81/0x2b0
 path_mount+0x47e/0x19d0
 do_mount+0xce/0xf0
 __x64_sys_mount+0x12c/0x1a0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The root cause is segment type is invalid, so in f2fs_do_replace_block(),
f2fs accesses f2fs_sm_info::curseg_array with out-of-range segment type,
result in accessing invalid curseg->sum_blk during memcpy in
f2fs_update_meta_page(). Fix this by adding sanity check on segment type
in build_sit_entries().

Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/segment.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index aa0162664a1e..15c72bfca692 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -4486,6 +4486,12 @@ static int build_sit_entries(struct f2fs_sb_info *sbi)
 				return err;
 			seg_info_from_raw_sit(se, &sit);
 
+			if (se->type >= NR_PERSISTENT_LOG) {
+				f2fs_err(sbi, "Invalid segment type: %u, segno: %u",
+							se->type, start);
+				return -EFSCORRUPTED;
+			}
+
 			sit_valid_blocks[SE_PAGETYPE(se)] += se->valid_blocks;
 
 			if (f2fs_block_unit_discard(sbi)) {
@@ -4534,6 +4540,13 @@ static int build_sit_entries(struct f2fs_sb_info *sbi)
 			break;
 		seg_info_from_raw_sit(se, &sit);
 
+		if (se->type >= NR_PERSISTENT_LOG) {
+			f2fs_err(sbi, "Invalid segment type: %u, segno: %u",
+							se->type, start);
+			err = -EFSCORRUPTED;
+			break;
+		}
+
 		sit_valid_blocks[SE_PAGETYPE(se)] += se->valid_blocks;
 
 		if (f2fs_block_unit_discard(sbi)) {
-- 
2.35.1

[PATCH AUTOSEL 5.18 35/39] smb3: check xattr value length earlier

[Sasha Levin]

From: Steve French <stfrench@microsoft.com>

[ Upstream commit 5fa2cffba0b82336a2244d941322eb1627ff787b ]

Coverity complains about assigning a pointer based on
value length before checking that value length goes
beyond the end of the SMB.  Although this is even more
unlikely as value length is a single byte, and the
pointer is not dereferenced until laterm, it is clearer
to check the lengths first.

Addresses-Coverity: 1467704 ("Speculative execution data leak")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/smb2ops.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index 19f957785a73..a09563efe78a 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1120,9 +1120,7 @@ move_smb2_ea_to_cifs(char *dst, size_t dst_size,
 	size_t name_len, value_len, user_name_len;
 
 	while (src_size > 0) {
-		name = &src->ea_data[0];
 		name_len = (size_t)src->ea_name_length;
-		value = &src->ea_data[src->ea_name_length + 1];
 		value_len = (size_t)le16_to_cpu(src->ea_value_length);
 
 		if (name_len == 0)
@@ -1134,6 +1132,9 @@ move_smb2_ea_to_cifs(char *dst, size_t dst_size,
 			goto out;
 		}
 
+		name = &src->ea_data[0];
+		value = &src->ea_data[src->ea_name_length + 1];
+
 		if (ea_name) {
 			if (ea_name_len == name_len &&
 			    memcmp(ea_name, name, name_len) == 0) {
-- 
2.35.1

[PATCH AUTOSEL 5.18 36/39] powerpc/64: Init jump labels before parse_early_param()

[Sasha Levin]

From: Zhouyi Zhou <zhouzhouyi@gmail.com>

[ Upstream commit ca829e05d3d4f728810cc5e4b468d9ebc7745eb3 ]

On 64-bit, calling jump_label_init() in setup_feature_keys() is too
late because static keys may be used in subroutines of
parse_early_param() which is again subroutine of early_init_devtree().

For example booting with "threadirqs":

  static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init()
  WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120
  ...
  NIP static_key_enable_cpuslocked+0xfc/0x120
  LR  static_key_enable_cpuslocked+0xf8/0x120
  Call Trace:
    static_key_enable_cpuslocked+0xf8/0x120 (unreliable)
    static_key_enable+0x30/0x50
    setup_forced_irqthreads+0x28/0x40
    do_early_param+0xa0/0x108
    parse_args+0x290/0x4e0
    parse_early_options+0x48/0x5c
    parse_early_param+0x58/0x84
    early_init_devtree+0xd4/0x518
    early_setup+0xb4/0x214

So call jump_label_init() just before parse_early_param() in
early_init_devtree().

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[mpe: Add call trace to change log and minor wording edits.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220726015747.11754-1-zhouzhouyi@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/prom.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 86c4f009563d..053781a4678d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -752,6 +752,13 @@ void __init early_init_devtree(void *params)
 	early_init_dt_scan_root();
 	early_init_dt_scan_memory_ppc();
 
+	/*
+	 * As generic code authors expect to be able to use static keys
+	 * in early_param() handlers, we initialize the static keys just
+	 * before parsing early params (it's fine to call jump_label_init()
+	 * more than once).
+	 */
+	jump_label_init();
 	parse_early_param();
 
 	/* make sure we've parsed cmdline for mem= before this */
-- 
2.35.1

[PATCH AUTOSEL 5.18 37/39] venus: pm_helpers: Fix warning in OPP during probe

[Sasha Levin]

From: Stanimir Varbanov <stanimir.varbanov@linaro.org>

[ Upstream commit 1d95af02f23031c2e1cca7607c514b86ce85bc6e ]

Fix the following WARN triggered during Venus driver probe on
5.19.0-rc8-next-20220728:

 WARNING: CPU: 7 PID: 339 at drivers/opp/core.c:2471 dev_pm_opp_set_config+0x49c/0x610
 Modules linked in: qcom_spmi_adc5 rtc_pm8xxx qcom_spmi_adc_tm5 leds_qcom_lpg led_class_multicolor
  qcom_pon qcom_vadc_common venus_core(+) qcom_spmi_temp_alarm v4l2_mem2mem videobuf2_v4l2 msm(+)
  videobuf2_common crct10dif_ce spi_geni_qcom snd_soc_sm8250 i2c_qcom_geni gpu_sched
  snd_soc_qcom_common videodev qcom_q6v5_pas soundwire_qcom drm_dp_aux_bus qcom_stats
  drm_display_helper qcom_pil_info soundwire_bus snd_soc_lpass_va_macro mc qcom_q6v5
  phy_qcom_snps_femto_v2 qcom_rng snd_soc_lpass_macro_common snd_soc_lpass_wsa_macro
  lpass_gfm_sm8250 slimbus qcom_sysmon qcom_common qcom_glink_smem qmi_helpers
  qcom_wdt mdt_loader socinfo icc_osm_l3 display_connector
  drm_kms_helper qnoc_sm8250 drm fuse ip_tables x_tables ipv6
 CPU: 7 PID: 339 Comm: systemd-udevd Not tainted 5.19.0-rc8-next-20220728 #4
 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : dev_pm_opp_set_config+0x49c/0x610
 lr : dev_pm_opp_set_config+0x58/0x610
 sp : ffff8000093c3710
 x29: ffff8000093c3710 x28: ffffbca3959d82b8 x27: ffff8000093c3d00
 x26: ffffbca3959d8e08 x25: ffff4396cac98118 x24: ffff4396c0e24810
 x23: ffff4396c4272c40 x22: ffff4396c0e24810 x21: ffff8000093c3810
 x20: ffff4396cac36800 x19: ffff4396cac96800 x18: 0000000000000000
 x17: 0000000000000003 x16: ffffbca3f4edf198 x15: 0000001cba64a858
 x14: 0000000000000180 x13: 000000000000017e x12: 0000000000000000
 x11: 0000000000000002 x10: 0000000000000a60 x9 : ffff8000093c35c0
 x8 : ffff4396c4273700 x7 : ffff43983efca6c0 x6 : ffff43983efca640
 x5 : 00000000410fd0d0 x4 : ffff4396c4272c40 x3 : ffffbca3f5d1e008
 x2 : 0000000000000000 x1 : ffff4396c2421600 x0 : ffff4396cac96860
 Call trace:
  dev_pm_opp_set_config+0x49c/0x610
  devm_pm_opp_set_config+0x18/0x70
  vcodec_domains_get+0xb8/0x1638 [venus_core]
  core_get_v4+0x1d8/0x218 [venus_core]
  venus_probe+0xf4/0x468 [venus_core]
  platform_probe+0x68/0xd8
  really_probe+0xbc/0x2a8
  __driver_probe_device+0x78/0xe0
  driver_probe_device+0x3c/0xf0
  __driver_attach+0x70/0x120
  bus_for_each_dev+0x70/0xc0
  driver_attach+0x24/0x30
  bus_add_driver+0x150/0x200
  driver_register+0x64/0x120
  __platform_driver_register+0x28/0x38
  qcom_venus_driver_init+0x24/0x1000 [venus_core]
  do_one_initcall+0x54/0x1c8
  do_init_module+0x44/0x1d0
  load_module+0x16c8/0x1aa0
  __do_sys_finit_module+0xbc/0x110
  __arm64_sys_finit_module+0x20/0x30
  invoke_syscall+0x44/0x108
  el0_svc_common.constprop.0+0xcc/0xf0
  do_el0_svc+0x2c/0xb8
  el0_svc+0x2c/0x88
  el0t_64_sync_handler+0xb8/0xc0
  el0t_64_sync+0x18c/0x190
  qcom-venus: probe of aa00000.video-codec failed with error -16

The fix is re-ordering the code related to OPP core. The OPP core
expects all configuration options to be provided before the OPP
table is added.

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/venus/pm_helpers.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index cb48c5ff3dee..c93d2906e4c7 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -875,7 +875,7 @@ static int vcodec_domains_get(struct venus_core *core)
 	}
 
 skip_pmdomains:
-	if (!core->has_opp_table)
+	if (!core->res->opp_pmdomain)
 		return 0;
 
 	/* Attach the power domain for setting performance state */
@@ -1007,6 +1007,10 @@ static int core_get_v4(struct venus_core *core)
 	if (ret)
 		return ret;
 
+	ret = vcodec_domains_get(core);
+	if (ret)
+		return ret;
+
 	if (core->res->opp_pmdomain) {
 		ret = devm_pm_opp_of_add_table(dev);
 		if (!ret) {
@@ -1017,10 +1021,6 @@ static int core_get_v4(struct venus_core *core)
 		}
 	}
 
-	ret = vcodec_domains_get(core);
-	if (ret)
-		return ret;
-
 	return 0;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 5.18 38/39] video: fbdev: i740fb: Check the argument of i740_calc_vclk()

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 40bf722f8064f50200b8c4f8946cd625b441dda9 ]

Since the user can control the arguments of the ioctl() from the user
space, under special arguments that may result in a divide-by-zero bug.

If the user provides an improper 'pixclock' value that makes the argumet
of i740_calc_vclk() less than 'I740_RFREQ_FIX', it will cause a
divide-by-zero bug in:
    drivers/video/fbdev/i740fb.c:353 p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX)));

The following log can reveal it:

divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:i740_calc_vclk drivers/video/fbdev/i740fb.c:353 [inline]
RIP: 0010:i740fb_decode_var drivers/video/fbdev/i740fb.c:646 [inline]
RIP: 0010:i740fb_set_par+0x163f/0x3b70 drivers/video/fbdev/i740fb.c:742
Call Trace:
 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1034
 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189

Fix this by checking the argument of i740_calc_vclk() first.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/i740fb.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/i740fb.c b/drivers/video/fbdev/i740fb.c
index 09dd85553d4f..7f09a0daaaa2 100644
--- a/drivers/video/fbdev/i740fb.c
+++ b/drivers/video/fbdev/i740fb.c
@@ -400,7 +400,7 @@ static int i740fb_decode_var(const struct fb_var_screeninfo *var,
 	u32 xres, right, hslen, left, xtotal;
 	u32 yres, lower, vslen, upper, ytotal;
 	u32 vxres, xoffset, vyres, yoffset;
-	u32 bpp, base, dacspeed24, mem;
+	u32 bpp, base, dacspeed24, mem, freq;
 	u8 r7;
 	int i;
 
@@ -643,7 +643,12 @@ static int i740fb_decode_var(const struct fb_var_screeninfo *var,
 	par->atc[VGA_ATC_OVERSCAN] = 0;
 
 	/* Calculate VCLK that most closely matches the requested dot clock */
-	i740_calc_vclk((((u32)1e9) / var->pixclock) * (u32)(1e3), par);
+	freq = (((u32)1e9) / var->pixclock) * (u32)(1e3);
+	if (freq < I740_RFREQ_FIX) {
+		fb_dbg(info, "invalid pixclock\n");
+		freq = I740_RFREQ_FIX;
+	}
+	i740_calc_vclk(freq, par);
 
 	/* Since we program the clocks ourselves, always use VCLK2. */
 	par->misc |= 0x0C;
-- 
2.35.1

[PATCH AUTOSEL 5.18 39/39] MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0

[Sasha Levin]

From: Nathan Chancellor <nathan@kernel.org>

[ Upstream commit 74de14fe05dd6b151d73cb0c73c8ec874cbdcde6 ]

When CONFIG_XPA is enabled, Clang warns:

  arch/mips/mm/tlbex.c:629:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
          if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
                              ^
  arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
  # define _PAGE_NO_EXEC          (1 << _PAGE_NO_EXEC_SHIFT)
                                     ^
  arch/mips/mm/tlbex.c:2568:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
          if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
                                ^
  arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
  # define _PAGE_NO_EXEC          (1 << _PAGE_NO_EXEC_SHIFT)
                                     ^
  2 errors generated.

_PAGE_NO_EXEC can be '0' or '1 << _PAGE_NO_EXEC_SHIFT' depending on the
build and runtime configuration, which is what the negation operators
are trying to convey. To silence the warning, explicitly compare against
0 so the result of the '<<' operator is not implicitly converted to a
boolean.

According to its documentation, GCC enables -Wint-in-bool-context with
-Wall but this warning is not visible when building the same
configuration with GCC. It appears GCC only warns when compiling C++,
not C, although the documentation makes no note of this:
https://godbolt.org/z/x39q3brxf

Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/mm/tlbex.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 8dbbd99fc7e8..be4d4670d649 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -626,7 +626,7 @@ static __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
 		return;
 	}
 
-	if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
+	if (cpu_has_rixi && _PAGE_NO_EXEC != 0) {
 		if (fill_includes_sw_bits) {
 			UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
 		} else {
@@ -2565,7 +2565,7 @@ static void check_pabits(void)
 	unsigned long entry;
 	unsigned pabits, fillbits;
 
-	if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
+	if (!cpu_has_rixi || _PAGE_NO_EXEC == 0) {
 		/*
 		 * We'll only be making use of the fact that we can rotate bits
 		 * into the fill if the CPU supports RIXI, so don't bother
-- 
2.35.1