[PATCH v4 00/13] acpi: i2c: Use SharedAndWake and ExclusiveAndWake to enable wake irq

[PATCH v4 00/13] acpi: i2c: Use SharedAndWake and ExclusiveAndWake to enable wake irq

[Raul E Rangel]

Today, i2c drivers are making the assumption that their IRQs can also
be used as wake IRQs. This isn't always the case and it can lead to
spurious wakes. This has recently started to affect AMD Chromebooks.
With the introduction of
d62bd5ce12d7 ("pinctrl: amd: Implement irq_set_wake"), the AMD GPIO
controller gained the capability to set the wake bit on each GPIO. The
ACPI specification defines two ways to inform the system if a device is
wake capable:
1) The _PRW object defines the GPE that can be used to wake the system.
2) Setting ExclusiveAndWake or SharedAndWake in the _CRS GpioInt.

Currently only the first method is supported. The i2c drivers don't have
any indication that the IRQ is wake capable, so they guess. This causes
spurious interrupts, for example:
* We have an ACPI HID device that has `_PR0` and `_PR3`. It doesn't have
  `_PRW` or `ExclusiveAndWake` so that means the device can't wake the
  system.
* The IRQ line is active level low for this device and is pulled up by
  the power resource defined in `_PR0`/`_PR3`.
* The i2c driver will (incorrectly) arm the GPIO for wake by calling
  `enable_irq_wake` as part of its suspend hook.
* ACPI will power down the device since it doesn't have a wake GPE
  associated with it.
* When the device is powered down, the IRQ line will drop, and it will
  trigger a wake event.

See the following debug log:
[   42.335804] PM: Suspending system (s2idle)
[   42.340186] amd_gpio AMD0030:00: RX: Setting wake for pin 89 to enable
[   42.467736]     power-0416 __acpi_power_off      : Power resource [PR00] turned off
[   42.467739] device_pm-0280 device_set_power      : Device [H05D] transitioned to D3cold
[   42.475210] PM: pm_system_irq_wakeup: 11 triggered pinctrl_amd
[   42.535293] PM: Wakeup unrelated to ACPI SCI
[   42.535294] PM: resume from suspend-to-idle

In order to fix this, we need to take into account the wake capable bit
defined on the Interrupt/GpioInt. This is accomplished by:
* Migrating some of the i2c drivers over to using the PM subsystem to
  manage the wake IRQ.
* Expose the wake_capable bit from the ACPI Interrupt/GpioInt resource
  to the  i2c core.
* Use the wake_capable bit in the i2c core to call
  `dev_pm_set_wake_irq`. This reuses the existing device tree flow.
* Make the i2c drivers stop calling `dev_pm_set_wake_irq` since it's now
  handled by the i2c core.
* Make the ACPI device PM system aware of the wake_irq. This is
  necessary so the device doesn't incorrectly get powered down when a
  wake_irq is enabled.

I've tested this code with various combinations of having _PRW,
ExclusiveAndWake and power resources all defined or not defined, but it
would be great if others could test this out on their hardware.

I'm sure this will surface some devices where the IRQs were not
correctly marked as wake capable. Ideally the firmware can be fixed, but
if not we can work around this in the kernel by providing a board
specific `struct i2c_board_info` with the `I2C_CLIENT_WAKE` flag set.
See `chromeos_laptop.c` for an example of matching DMI properties and
setting the `I2C_CLIENT_WAKE` override.

Thanks,
Raul

Changes in v4:
- Added Reviewed-by
- Reformatted with 96 char limit
- Removed unnecessary !!
- Removed unrelated white space change
- Renamed i2c_acpi_add_resource to i2c_acpi_add_irq_resource
- Expanded logic in i2c_acpi_add_i2c_resource to make it easier to read

Changes in v3:
- Kept `acpi_dev_gpio_irq_get_by` unchanged to avoid having to touch
  unrelated drivers.
- Converted wake_capable parameter to bool.
- Fixed bad indent
- Convert wake_capable to bool
- Only update wake_capable pointer once
- Move wake_capable local into local block

Changes in v2:
- Added elants_i2c to series
- Added raydium_ts_i2c to series
- Fixed call site in mlxbf_gige_probe
- Added ability to extract wake bit from Interrupt/IRQ resources
- Look at wake_cabple bit for IRQ/Interrupt resources
- I chose not to keep the legacy code around since systems without DT or ACPI should be rare.

Raul E Rangel (13):
  HID: i2c-hid: Use PM subsystem to manage wake irq
  Input: elan_i2c - Use PM subsystem to manage wake irq
  Input: elants_i2c - Use PM subsystem to manage wake irq
  Input: raydium_ts_i2c - Use PM subsystem to manage wake irq
  gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
  ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
  i2c: acpi: Use ACPI wake capability bit to set wake_irq
  ACPI: PM: Take wake IRQ into consideration when entering
    suspend-to-idle
  HID: i2c-hid: acpi: Stop setting wakeup_capable
  HID: i2c-hid: Don't set wake_capable and wake_irq
  Input: elan_i2c - Don't set wake_capable and wake_irq
  Input: elants_i2c - Don't set wake_capable and wake_irq
  Input: raydium_ts_i2c - Don't set wake_capable and wake_irq

 drivers/acpi/device_pm.c                   | 19 +++++++++--
 drivers/acpi/irq.c                         |  8 +++--
 drivers/acpi/resource.c                    | 23 ++++++++++----
 drivers/gpio/gpiolib-acpi.c                | 15 +++++++--
 drivers/gpio/gpiolib-acpi.h                |  2 ++
 drivers/hid/i2c-hid/i2c-hid-acpi.c         |  5 ---
 drivers/hid/i2c-hid/i2c-hid-core.c         | 24 ++------------
 drivers/i2c/i2c-core-acpi.c                | 37 ++++++++++++++++------
 drivers/i2c/i2c-core-base.c                |  6 +++-
 drivers/i2c/i2c-core.h                     |  4 +--
 drivers/input/mouse/elan_i2c_core.c        | 15 +--------
 drivers/input/touchscreen/elants_i2c.c     | 13 ++------
 drivers/input/touchscreen/raydium_i2c_ts.c |  7 +---
 drivers/pnp/pnpacpi/rsparser.c             |  7 ++--
 include/linux/acpi.h                       | 23 +++++++++++---
 include/linux/ioport.h                     |  3 +-
 16 files changed, 117 insertions(+), 94 deletions(-)

-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 01/13] HID: i2c-hid: Use PM subsystem to manage wake irq

[Raul E Rangel]

The I2C hid driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies on the PM subsystem. This is done by calling
dev_pm_set_wake_irq.

i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.

I tested this on an ACPI system that has a HID touchscreen and verified
the IRQ was armed for wake on suspend.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

(no changes since v3)

Changes in v3:
- Fixed typo in if condition

Changes in v2:
- Set the wake_irq when not configured by the i2c-core. This is
  different than v1, where the wake_irq was only set for non DT systems.

 drivers/hid/i2c-hid/i2c-hid-core.c | 33 +++++++++++-------------------
 1 file changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index baa169fadd6632..a2fa40dec04ea5 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pm.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/device.h>
 #include <linux/wait.h>
 #include <linux/err.h>
@@ -116,7 +117,6 @@ struct i2c_hid {
 
 	wait_queue_head_t	wait;		/* For waiting the interrupt */
 
-	bool			irq_wake_enabled;
 	struct mutex		reset_lock;
 
 	struct i2chid_ops	*ops;
@@ -1036,6 +1036,15 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
 	if (ret < 0)
 		goto err_powered;
 
+	/*
+	 * The wake IRQ should be declared via device tree instead of assuming
+	 * the IRQ can wake the system. This is here for legacy reasons and
+	 * will be removed once the i2c-core supports querying ACPI for wake
+	 * capabilities.
+	 */
+	if (!client->dev.power.wakeirq)
+		dev_pm_set_wake_irq(&client->dev, client->irq);
+
 	hid = hid_allocate_device();
 	if (IS_ERR(hid)) {
 		ret = PTR_ERR(hid);
@@ -1119,7 +1128,6 @@ static int i2c_hid_core_suspend(struct device *dev)
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
 	struct hid_device *hid = ihid->hid;
 	int ret;
-	int wake_status;
 
 	ret = hid_driver_suspend(hid, PMSG_SUSPEND);
 	if (ret < 0)
@@ -1130,16 +1138,8 @@ static int i2c_hid_core_suspend(struct device *dev)
 
 	disable_irq(client->irq);
 
-	if (device_may_wakeup(&client->dev)) {
-		wake_status = enable_irq_wake(client->irq);
-		if (!wake_status)
-			ihid->irq_wake_enabled = true;
-		else
-			hid_warn(hid, "Failed to enable irq wake: %d\n",
-				wake_status);
-	} else {
+	if (!device_may_wakeup(&client->dev))
 		i2c_hid_core_power_down(ihid);
-	}
 
 	return 0;
 }
@@ -1150,18 +1150,9 @@ static int i2c_hid_core_resume(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
 	struct hid_device *hid = ihid->hid;
-	int wake_status;
 
-	if (!device_may_wakeup(&client->dev)) {
+	if (!device_may_wakeup(&client->dev))
 		i2c_hid_core_power_up(ihid);
-	} else if (ihid->irq_wake_enabled) {
-		wake_status = disable_irq_wake(client->irq);
-		if (!wake_status)
-			ihid->irq_wake_enabled = false;
-		else
-			hid_warn(hid, "Failed to disable irq wake: %d\n",
-				wake_status);
-	}
 
 	enable_irq(client->irq);
 
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 02/13] Input: elan_i2c - Use PM subsystem to manage wake irq

[Raul E Rangel]

The Elan I2C touchpad driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies on the PM subsystem. This is done by calling
dev_pm_set_wake_irq.

i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.

I tested this on an ACPI system where the touchpad doesn't have _PRW
defined. I verified I can still wake the system and that the wake source
was the touchpad IRQ GPIO.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

(no changes since v2)

Changes in v2:
- Set the wake_irq when not configured by the i2c-core. This is
  different than v1, where the wake_irq was only set for non DT systems.

 drivers/input/mouse/elan_i2c_core.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index e1758d5ffe4218..3947474e93d16a 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -33,6 +33,7 @@
 #include <linux/jiffies.h>
 #include <linux/completion.h>
 #include <linux/of.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <asm/unaligned.h>
@@ -86,8 +87,6 @@ struct elan_tp_data {
 	u16			fw_page_size;
 	u32			fw_signature_address;
 
-	bool			irq_wake;
-
 	u8			min_baseline;
 	u8			max_baseline;
 	bool			baseline_ready;
@@ -1340,6 +1339,15 @@ static int elan_probe(struct i2c_client *client,
 	if (!dev->of_node)
 		device_init_wakeup(dev, true);
 
+	/*
+	 * The wake IRQ should be declared via device tree instead of assuming
+	 * the IRQ can wake the system. This is here for legacy reasons and
+	 * will be removed once the i2c-core supports querying ACPI for wake
+	 * capabilities.
+	 */
+	if (!dev->power.wakeirq)
+		dev_pm_set_wake_irq(dev, client->irq);
+
 	return 0;
 }
 
@@ -1362,8 +1370,6 @@ static int __maybe_unused elan_suspend(struct device *dev)
 
 	if (device_may_wakeup(dev)) {
 		ret = elan_sleep(data);
-		/* Enable wake from IRQ */
-		data->irq_wake = (enable_irq_wake(client->irq) == 0);
 	} else {
 		ret = elan_set_power(data, false);
 		if (ret)
@@ -1394,9 +1400,6 @@ static int __maybe_unused elan_resume(struct device *dev)
 			dev_err(dev, "error %d enabling regulator\n", error);
 			goto err;
 		}
-	} else if (data->irq_wake) {
-		disable_irq_wake(client->irq);
-		data->irq_wake = false;
 	}
 
 	error = elan_set_power(data, true);
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 03/13] Input: elants_i2c - Use PM subsystem to manage wake irq

[Raul E Rangel]

The Elan I2C touchscreen driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies on the PM subsystem. This is done by calling
dev_pm_set_wake_irq.

i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

(no changes since v2)

Changes in v2:
- Added elants_i2c to series

 drivers/input/touchscreen/elants_i2c.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index a56f042adf9d82..80e16b533c452a 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -36,6 +36,7 @@
 #include <linux/input/touchscreen.h>
 #include <linux/acpi.h>
 #include <linux/of.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/gpio/consumer.h>
 #include <linux/regulator/consumer.h>
 #include <linux/uuid.h>
@@ -180,7 +181,6 @@ struct elants_data {
 	u8 cmd_resp[HEADER_SIZE];
 	struct completion cmd_done;
 
-	bool wake_irq_enabled;
 	bool keep_power_in_suspend;
 
 	/* Must be last to be used for DMA operations */
@@ -1582,6 +1582,15 @@ static int elants_i2c_probe(struct i2c_client *client)
 	if (!client->dev.of_node)
 		device_init_wakeup(&client->dev, true);
 
+	/*
+	 * The wake IRQ should be declared via device tree instead of assuming
+	 * the IRQ can wake the system. This is here for legacy reasons and
+	 * will be removed once the i2c-core supports querying ACPI for wake
+	 * capabilities.
+	 */
+	if (!client->dev.power.wakeirq)
+		dev_pm_set_wake_irq(&client->dev, client->irq);
+
 	error = devm_device_add_group(&client->dev, &elants_attribute_group);
 	if (error) {
 		dev_err(&client->dev, "failed to create sysfs attributes: %d\n",
@@ -1626,7 +1635,7 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev)
 		 * The device will automatically enter idle mode
 		 * that has reduced power consumption.
 		 */
-		ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0);
+		return 0;
 	} else if (ts->keep_power_in_suspend) {
 		for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
 			error = elants_i2c_send(client, set_sleep_cmd,
@@ -1655,8 +1664,6 @@ static int __maybe_unused elants_i2c_resume(struct device *dev)
 	int error;
 
 	if (device_may_wakeup(dev)) {
-		if (ts->wake_irq_enabled)
-			disable_irq_wake(client->irq);
 		elants_i2c_sw_reset(client);
 	} else if (ts->keep_power_in_suspend) {
 		for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 04/13] Input: raydium_ts_i2c - Use PM subsystem to manage wake irq

[Raul E Rangel]

The raydium I2C touchscreen driver is currently manually managing the
wake IRQ. This change removes the explicit enable_irq_wake /
disable_irq_wake and instead relies on the PM subsystem. This is done by
calling dev_pm_set_wake_irq.

i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

(no changes since v2)

Changes in v2:
- Added raydium_ts_i2c to series

 drivers/input/touchscreen/raydium_i2c_ts.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 3a4952935366f9..66c5b577b791d4 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <asm/unaligned.h>
@@ -134,8 +135,6 @@ struct raydium_data {
 	u8 pkg_size;
 
 	enum raydium_boot_mode boot_mode;
-
-	bool wake_irq_enabled;
 };
 
 /*
@@ -1186,6 +1185,15 @@ static int raydium_i2c_probe(struct i2c_client *client,
 		return error;
 	}
 
+	/*
+	 * The wake IRQ should be declared via device tree instead of assuming
+	 * the IRQ can wake the system. This is here for legacy reasons and
+	 * will be removed once the i2c-core supports querying ACPI for wake
+	 * capabilities.
+	 */
+	if (!client->dev.power.wakeirq)
+		dev_pm_set_wake_irq(&client->dev, client->irq);
+
 	error = devm_device_add_group(&client->dev,
 				   &raydium_i2c_attribute_group);
 	if (error) {
@@ -1222,8 +1230,6 @@ static int __maybe_unused raydium_i2c_suspend(struct device *dev)
 
 	if (device_may_wakeup(dev)) {
 		raydium_enter_sleep(client);
-
-		ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0);
 	} else {
 		raydium_i2c_power_off(ts);
 	}
@@ -1237,8 +1243,6 @@ static int __maybe_unused raydium_i2c_resume(struct device *dev)
 	struct raydium_data *ts = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev)) {
-		if (ts->wake_irq_enabled)
-			disable_irq_wake(client->irq);
 		raydium_i2c_sw_reset(client);
 	} else {
 		raydium_i2c_power_on(ts);
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 05/13] gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get

[Raul E Rangel]

The ACPI spec defines the SharedAndWake and ExclusiveAndWake share type
keywords. This is an indication that the GPIO IRQ can also be used as a
wake source. This change exposes the wake_capable bit so drivers can
correctly enable wake functionality instead of making an assumption.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---

Changes in v4:
- Added Reviewed-by
- Reformatted with 96 char limit

Changes in v3:
- Kept `acpi_dev_gpio_irq_get_by` unchanged to avoid having to touch
  unrelated drivers.
- Converted wake_capable parameter to bool.

Changes in v2:
- Fixed call site in mlxbf_gige_probe

 drivers/gpio/gpiolib-acpi.c | 15 ++++++++++++---
 drivers/gpio/gpiolib-acpi.h |  2 ++
 include/linux/acpi.h        | 21 +++++++++++++++++----
 3 files changed, 31 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 9be1376f9a627f..1f2ade475b36cb 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -741,6 +741,7 @@ static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
 		lookup->info.pin_config = agpio->pin_config;
 		lookup->info.debounce = agpio->debounce_timeout;
 		lookup->info.gpioint = gpioint;
+		lookup->info.wake_capable = agpio->wake_capable == ACPI_WAKE_CAPABLE;
 
 		/*
 		 * Polarity and triggering are only specified for GpioInt
@@ -987,10 +988,11 @@ struct gpio_desc *acpi_node_get_gpiod(struct fwnode_handle *fwnode,
 }
 
 /**
- * acpi_dev_gpio_irq_get_by() - Find GpioInt and translate it to Linux IRQ number
+ * acpi_dev_gpio_irq_wake_get_by() - Find GpioInt and translate it to Linux IRQ number
  * @adev: pointer to a ACPI device to get IRQ from
  * @name: optional name of GpioInt resource
  * @index: index of GpioInt resource (starting from %0)
+ * @wake_capable: Set to true if the IRQ is wake capable
  *
  * If the device has one or more GpioInt resources, this function can be
  * used to translate from the GPIO offset in the resource to the Linux IRQ
@@ -1002,9 +1004,13 @@ struct gpio_desc *acpi_node_get_gpiod(struct fwnode_handle *fwnode,
  * The function takes optional @name parameter. If the resource has a property
  * name, then only those will be taken into account.
  *
+ * The GPIO is considered wake capable if the GpioInt resource specifies
+ * SharedAndWake or ExclusiveAndWake.
+ *
  * Return: Linux IRQ number (> %0) on success, negative errno on failure.
  */
-int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int index)
+int acpi_dev_gpio_irq_wake_get_by(struct acpi_device *adev, const char *name, int index,
+				  bool *wake_capable)
 {
 	int idx, i;
 	unsigned int irq_flags;
@@ -1061,13 +1067,16 @@ int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int ind
 				dev_dbg(&adev->dev, "IRQ %d already in use\n", irq);
 			}
 
+			if (wake_capable)
+				*wake_capable = info.wake_capable;
+
 			return irq;
 		}
 
 	}
 	return -ENOENT;
 }
-EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_get_by);
+EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_wake_get_by);
 
 static acpi_status
 acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
diff --git a/drivers/gpio/gpiolib-acpi.h b/drivers/gpio/gpiolib-acpi.h
index e476558d947136..1ac6816839dbce 100644
--- a/drivers/gpio/gpiolib-acpi.h
+++ b/drivers/gpio/gpiolib-acpi.h
@@ -18,6 +18,7 @@ struct acpi_device;
  * @pin_config: pin bias as provided by ACPI
  * @polarity: interrupt polarity as provided by ACPI
  * @triggering: triggering type as provided by ACPI
+ * @wake_capable: wake capability as provided by ACPI
  * @debounce: debounce timeout as provided by ACPI
  * @quirks: Linux specific quirks as provided by struct acpi_gpio_mapping
  */
@@ -28,6 +29,7 @@ struct acpi_gpio_info {
 	int pin_config;
 	int polarity;
 	int triggering;
+	bool wake_capable;
 	unsigned int debounce;
 	unsigned int quirks;
 };
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 6f64b2f3dc5479..cd7371a5f2839b 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1202,7 +1202,8 @@ bool acpi_gpio_get_irq_resource(struct acpi_resource *ares,
 				struct acpi_resource_gpio **agpio);
 bool acpi_gpio_get_io_resource(struct acpi_resource *ares,
 			       struct acpi_resource_gpio **agpio);
-int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int index);
+int acpi_dev_gpio_irq_wake_get_by(struct acpi_device *adev, const char *name, int index,
+				  bool *wake_capable);
 #else
 static inline bool acpi_gpio_get_irq_resource(struct acpi_resource *ares,
 					      struct acpi_resource_gpio **agpio)
@@ -1214,16 +1215,28 @@ static inline bool acpi_gpio_get_io_resource(struct acpi_resource *ares,
 {
 	return false;
 }
-static inline int acpi_dev_gpio_irq_get_by(struct acpi_device *adev,
-					   const char *name, int index)
+static inline int acpi_dev_gpio_irq_wake_get_by(struct acpi_device *adev, const char *name,
+						int index, bool *wake_capable)
 {
 	return -ENXIO;
 }
 #endif
 
+static inline int acpi_dev_gpio_irq_wake_get(struct acpi_device *adev, int index,
+					     bool *wake_capable)
+{
+	return acpi_dev_gpio_irq_wake_get_by(adev, NULL, index, wake_capable);
+}
+
+static inline int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name,
+					   int index)
+{
+	return acpi_dev_gpio_irq_wake_get_by(adev, name, index, NULL);
+}
+
 static inline int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
 {
-	return acpi_dev_gpio_irq_get_by(adev, NULL, index);
+	return acpi_dev_gpio_irq_wake_get_by(adev, NULL, index, NULL);
 }
 
 /* Device properties */
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 06/13] ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags

[Raul E Rangel]

ACPI IRQ/Interrupt resources contain a bit that describes if the
interrupt should wake the system. This change exposes that bit via
a new IORESOURCE_IRQ_WAKECAPABLE flag. Drivers should check this flag
before arming an IRQ to wake the system.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

---

Changes in v4:
- Added Reviewed-by
- Reformatted with 96 char limit

Changes in v3:
- Fixed bad indent

Changes in v2:
- Added ability to extract wake bit from Interrupt/IRQ resources

 drivers/acpi/irq.c             |  8 +++++---
 drivers/acpi/resource.c        | 23 ++++++++++++++++-------
 drivers/pnp/pnpacpi/rsparser.c |  7 ++++---
 include/linux/acpi.h           |  2 +-
 include/linux/ioport.h         |  3 ++-
 5 files changed, 28 insertions(+), 15 deletions(-)

diff --git a/drivers/acpi/irq.c b/drivers/acpi/irq.c
index dabe45eba055d1..4bb5ab33a5ceb1 100644
--- a/drivers/acpi/irq.c
+++ b/drivers/acpi/irq.c
@@ -147,6 +147,7 @@ struct acpi_irq_parse_one_ctx {
  * @polarity: polarity attributes of hwirq
  * @polarity: polarity attributes of hwirq
  * @shareable: shareable attributes of hwirq
+ * @wake_capable: wake capable attribute of hwirq
  * @ctx: acpi_irq_parse_one_ctx updated by this function
  *
  * Description:
@@ -156,12 +157,13 @@ struct acpi_irq_parse_one_ctx {
 static inline void acpi_irq_parse_one_match(struct fwnode_handle *fwnode,
 					    u32 hwirq, u8 triggering,
 					    u8 polarity, u8 shareable,
+					    u8 wake_capable,
 					    struct acpi_irq_parse_one_ctx *ctx)
 {
 	if (!fwnode)
 		return;
 	ctx->rc = 0;
-	*ctx->res_flags = acpi_dev_irq_flags(triggering, polarity, shareable);
+	*ctx->res_flags = acpi_dev_irq_flags(triggering, polarity, shareable, wake_capable);
 	ctx->fwspec->fwnode = fwnode;
 	ctx->fwspec->param[0] = hwirq;
 	ctx->fwspec->param[1] = acpi_dev_get_irq_type(triggering, polarity);
@@ -204,7 +206,7 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
 		fwnode = acpi_get_gsi_domain_id(irq->interrupts[ctx->index]);
 		acpi_irq_parse_one_match(fwnode, irq->interrupts[ctx->index],
 					 irq->triggering, irq->polarity,
-					 irq->shareable, ctx);
+					 irq->shareable, irq->wake_capable, ctx);
 		return AE_CTRL_TERMINATE;
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
 		eirq = &ares->data.extended_irq;
@@ -218,7 +220,7 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
 						      eirq->interrupts[ctx->index]);
 		acpi_irq_parse_one_match(fwnode, eirq->interrupts[ctx->index],
 					 eirq->triggering, eirq->polarity,
-					 eirq->shareable, ctx);
+					 eirq->shareable, eirq->wake_capable, ctx);
 		return AE_CTRL_TERMINATE;
 	}
 
diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index 510cdec375c4d8..fa3439aea76b3e 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -336,8 +336,9 @@ EXPORT_SYMBOL_GPL(acpi_dev_resource_ext_address_space);
  * @triggering: Triggering type as provided by ACPI.
  * @polarity: Interrupt polarity as provided by ACPI.
  * @shareable: Whether or not the interrupt is shareable.
+ * @wake_capable: Wake capability as provided by ACPI.
  */
-unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable)
+unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable, u8 wake_capable)
 {
 	unsigned long flags;
 
@@ -351,6 +352,9 @@ unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable)
 	if (shareable == ACPI_SHARED)
 		flags |= IORESOURCE_IRQ_SHAREABLE;
 
+	if (wake_capable == ACPI_WAKE_CAPABLE)
+		flags |= IORESOURCE_IRQ_WAKECAPABLE;
+
 	return flags | IORESOURCE_IRQ;
 }
 EXPORT_SYMBOL_GPL(acpi_dev_irq_flags);
@@ -442,7 +446,7 @@ static bool acpi_dev_irq_override(u32 gsi, u8 triggering, u8 polarity,
 
 static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
 				     u8 triggering, u8 polarity, u8 shareable,
-				     bool check_override)
+				     u8 wake_capable, bool check_override)
 {
 	int irq, p, t;
 
@@ -475,7 +479,7 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
 		}
 	}
 
-	res->flags = acpi_dev_irq_flags(triggering, polarity, shareable);
+	res->flags = acpi_dev_irq_flags(triggering, polarity, shareable, wake_capable);
 	irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
 	if (irq >= 0) {
 		res->start = irq;
@@ -523,7 +527,8 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
 		}
 		acpi_dev_get_irqresource(res, irq->interrupts[index],
 					 irq->triggering, irq->polarity,
-					 irq->shareable, true);
+					 irq->shareable, irq->wake_capable,
+					 true);
 		break;
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
 		ext_irq = &ares->data.extended_irq;
@@ -532,9 +537,13 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
 			return false;
 		}
 		if (is_gsi(ext_irq))
-			acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
-					 ext_irq->triggering, ext_irq->polarity,
-					 ext_irq->shareable, false);
+			acpi_dev_get_irqresource(res,
+						 ext_irq->interrupts[index],
+						 ext_irq->triggering,
+						 ext_irq->polarity,
+						 ext_irq->shareable,
+						 ext_irq->wake_capable,
+						 false);
 		else
 			irqresource_disabled(res, 0);
 		break;
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index da78dc77aed32e..4f05f610391b00 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -206,7 +206,8 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 		if (i >= 0) {
 			flags = acpi_dev_irq_flags(gpio->triggering,
 						   gpio->polarity,
-						   gpio->shareable);
+						   gpio->shareable,
+						   gpio->wake_capable);
 		} else {
 			flags = IORESOURCE_DISABLED;
 		}
@@ -315,7 +316,7 @@ static __init void pnpacpi_parse_irq_option(struct pnp_dev *dev,
 		if (p->interrupts[i])
 			__set_bit(p->interrupts[i], map.bits);
 
-	flags = acpi_dev_irq_flags(p->triggering, p->polarity, p->shareable);
+	flags = acpi_dev_irq_flags(p->triggering, p->polarity, p->shareable, p->wake_capable);
 	pnp_register_irq_resource(dev, option_flags, &map, flags);
 }
 
@@ -339,7 +340,7 @@ static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev,
 		}
 	}
 
-	flags = acpi_dev_irq_flags(p->triggering, p->polarity, p->shareable);
+	flags = acpi_dev_irq_flags(p->triggering, p->polarity, p->shareable, p->wake_capable);
 	pnp_register_irq_resource(dev, option_flags, &map, flags);
 }
 
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index cd7371a5f2839b..ea2efbdbeee511 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -495,7 +495,7 @@ bool acpi_dev_resource_address_space(struct acpi_resource *ares,
 				     struct resource_win *win);
 bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares,
 					 struct resource_win *win);
-unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable);
+unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable, u8 wake_capable);
 unsigned int acpi_dev_get_irq_type(int triggering, int polarity);
 bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
 				 struct resource *res);
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 616b683563a970..3baeea4d903bfd 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -79,7 +79,8 @@ struct resource {
 #define IORESOURCE_IRQ_HIGHLEVEL	(1<<2)
 #define IORESOURCE_IRQ_LOWLEVEL		(1<<3)
 #define IORESOURCE_IRQ_SHAREABLE	(1<<4)
-#define IORESOURCE_IRQ_OPTIONAL 	(1<<5)
+#define IORESOURCE_IRQ_OPTIONAL		(1<<5)
+#define IORESOURCE_IRQ_WAKECAPABLE	(1<<6)
 
 /* PnP DMA specific bits (IORESOURCE_BITS) */
 #define IORESOURCE_DMA_TYPE_MASK	(3<<0)
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 07/13] i2c: acpi: Use ACPI wake capability bit to set wake_irq

[Raul E Rangel]

Device tree already has a mechanism to pass the wake_irq. It does this
by looking for the wakeup-source property and setting the
I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
ACPI interrupt wake flag to determine if the interrupt can be used to
wake the system. Previously the i2c drivers had to make assumptions and
blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
If there is a device with an Active Low interrupt and the device gets
powered off while suspending, the interrupt line will go low since it's
no longer powered and wakes the system. For this reason we should
respect the board designers wishes and honor the wake bit defined on the
interrupt.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

---

Changes in v4:
- Removed unnecessary !!
- Removed unrelated whitespace change
- Added Reviewed-by
- Renamed i2c_acpi_add_resource to i2c_acpi_add_irq_resource
- Expanded logic in i2c_acpi_add_i2c_resource to make it easier to read

Changes in v3:
- Convert wake_capable to bool
- Only update wake_capable pointer once
- Move wake_capable local into local block

Changes in v2:
- Look at wake_cabple bit for IRQ/Interrupt resources

 drivers/i2c/i2c-core-acpi.c | 37 +++++++++++++++++++++++++++----------
 drivers/i2c/i2c-core-base.c |  6 +++++-
 drivers/i2c/i2c-core.h      |  4 ++--
 3 files changed, 34 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index c762a879c4cc6b..ba64e505183595 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -137,6 +137,11 @@ static const struct acpi_device_id i2c_acpi_ignored_device_ids[] = {
 	{}
 };
 
+struct i2c_acpi_irq_context {
+	int irq;
+	bool wake_capable;
+};
+
 static int i2c_acpi_do_lookup(struct acpi_device *adev,
 			      struct i2c_acpi_lookup *lookup)
 {
@@ -168,13 +173,19 @@ static int i2c_acpi_do_lookup(struct acpi_device *adev,
 	return 0;
 }
 
-static int i2c_acpi_add_resource(struct acpi_resource *ares, void *data)
+static int i2c_acpi_add_irq_resource(struct acpi_resource *ares, void *data)
 {
-	int *irq = data;
+	struct i2c_acpi_irq_context *irq_ctx = data;
 	struct resource r;
 
-	if (*irq <= 0 && acpi_dev_resource_interrupt(ares, 0, &r))
-		*irq = i2c_dev_irq_from_resources(&r, 1);
+	if (irq_ctx->irq > 0)
+		return 1;
+
+	if (!acpi_dev_resource_interrupt(ares, 0, &r))
+		return 1;
+
+	irq_ctx->irq = i2c_dev_irq_from_resources(&r, 1);
+	irq_ctx->wake_capable = r.flags & IORESOURCE_IRQ_WAKECAPABLE;
 
 	return 1; /* No need to add resource to the list */
 }
@@ -182,31 +193,37 @@ static int i2c_acpi_add_resource(struct acpi_resource *ares, void *data)
 /**
  * i2c_acpi_get_irq - get device IRQ number from ACPI
  * @client: Pointer to the I2C client device
+ * @wake_capable: Set to true if the IRQ is wake capable
  *
  * Find the IRQ number used by a specific client device.
  *
  * Return: The IRQ number or an error code.
  */
-int i2c_acpi_get_irq(struct i2c_client *client)
+int i2c_acpi_get_irq(struct i2c_client *client, bool *wake_capable)
 {
 	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
 	struct list_head resource_list;
-	int irq = -ENOENT;
+	struct i2c_acpi_irq_context irq_ctx = {
+		.irq = -ENOENT,
+	};
 	int ret;
 
 	INIT_LIST_HEAD(&resource_list);
 
 	ret = acpi_dev_get_resources(adev, &resource_list,
-				     i2c_acpi_add_resource, &irq);
+				     i2c_acpi_add_irq_resource, &irq_ctx);
 	if (ret < 0)
 		return ret;
 
 	acpi_dev_free_resource_list(&resource_list);
 
-	if (irq == -ENOENT)
-		irq = acpi_dev_gpio_irq_get(adev, 0);
+	if (irq_ctx.irq == -ENOENT)
+		irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0, &irq_ctx.wake_capable);
+
+	if (wake_capable)
+		*wake_capable = irq_ctx.wake_capable;
 
-	return irq;
+	return irq_ctx.irq;
 }
 
 static int i2c_acpi_get_info(struct acpi_device *adev,
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 91007558bcb260..fc4b85fb90b1b7 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -487,7 +487,11 @@ static int i2c_device_probe(struct device *dev)
 			if (irq == -EINVAL || irq == -ENODATA)
 				irq = of_irq_get(dev->of_node, 0);
 		} else if (ACPI_COMPANION(dev)) {
-			irq = i2c_acpi_get_irq(client);
+			bool wake_capable;
+
+			irq = i2c_acpi_get_irq(client, &wake_capable);
+			if (irq > 0 && wake_capable)
+				client->flags |= I2C_CLIENT_WAKE;
 		}
 		if (irq == -EPROBE_DEFER) {
 			status = irq;
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index 87e2c914f1c57b..1247e6e6e97517 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -61,11 +61,11 @@ static inline int __i2c_check_suspended(struct i2c_adapter *adap)
 #ifdef CONFIG_ACPI
 void i2c_acpi_register_devices(struct i2c_adapter *adap);
 
-int i2c_acpi_get_irq(struct i2c_client *client);
+int i2c_acpi_get_irq(struct i2c_client *client, bool *wake_capable);
 #else /* CONFIG_ACPI */
 static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
 
-static inline int i2c_acpi_get_irq(struct i2c_client *client)
+static inline int i2c_acpi_get_irq(struct i2c_client *client, bool *wake_capable)
 {
 	return 0;
 }
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 08/13] ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle

[Raul E Rangel]

This change adds support for ACPI devices that use ExclusiveAndWake or
SharedAndWake in their _CRS GpioInt definition (instead of using _PRW),
and also provide power resources. Previously the ACPI subsystem had no
idea if the device had a wake capable interrupt armed. This resulted
in the ACPI device PM system placing the device into D3Cold, and thus
cutting power to the device. With this change we will now query the
_S0W method to figure out the appropriate wake capable D-state.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

(no changes since v1)

 drivers/acpi/device_pm.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 9dce1245689ca2..6bc81f525d5160 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -681,8 +681,23 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev,
 		d_min = ret;
 		wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
 			&& adev->wakeup.sleep_state >= target_state;
-	} else {
-		wakeup = adev->wakeup.flags.valid;
+	} else if (acpi_device_can_wakeup(adev)) {
+		/* ACPI GPE from specified by _PRW. */
+		wakeup = true;
+	} else if (device_may_wakeup(dev) && dev->power.wakeirq) {
+		/*
+		 * The ACPI subsystem doesn't manage the wake bit for IRQs
+		 * defined with ExclusiveAndWake and SharedAndWake. Instead we
+		 * expect them to be managed via the PM subsystem. Drivers
+		 * should call dev_pm_set_wake_irq to register an IRQ as a wake
+		 * source.
+		 *
+		 * If a device has a wake IRQ attached we need to check the
+		 * _S0W method to get the correct wake D-state. Otherwise we
+		 * end up putting the device into D3Cold which will more than
+		 * likely disable wake functionality.
+		 */
+		wakeup = true;
 	}
 
 	/*
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 09/13] HID: i2c-hid: acpi: Stop setting wakeup_capable

[Raul E Rangel]

This is now handled by the i2c-core driver.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

(no changes since v1)

 drivers/hid/i2c-hid/i2c-hid-acpi.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c
index b96ae15e0ad917..375c77c3db74d9 100644
--- a/drivers/hid/i2c-hid/i2c-hid-acpi.c
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c
@@ -105,11 +105,6 @@ static int i2c_hid_acpi_probe(struct i2c_client *client)
 
 	acpi_device_fix_up_power(adev);
 
-	if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0) {
-		device_set_wakeup_capable(dev, true);
-		device_set_wakeup_enable(dev, false);
-	}
-
 	return i2c_hid_core_probe(client, &ihid_acpi->ops,
 				  hid_descriptor_address, 0);
 }
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 10/13] HID: i2c-hid: Don't set wake_capable and wake_irq

[Raul E Rangel]

The i2c-core will now handle setting the wake_irq for DT and ACPI
systems.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

(no changes since v1)

 drivers/hid/i2c-hid/i2c-hid-core.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index a2fa40dec04ea5..65b7a95956866d 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -1036,15 +1036,6 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
 	if (ret < 0)
 		goto err_powered;
 
-	/*
-	 * The wake IRQ should be declared via device tree instead of assuming
-	 * the IRQ can wake the system. This is here for legacy reasons and
-	 * will be removed once the i2c-core supports querying ACPI for wake
-	 * capabilities.
-	 */
-	if (!client->dev.power.wakeirq)
-		dev_pm_set_wake_irq(&client->dev, client->irq);
-
 	hid = hid_allocate_device();
 	if (IS_ERR(hid)) {
 		ret = PTR_ERR(hid);
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 11/13] Input: elan_i2c - Don't set wake_capable and wake_irq

[Raul E Rangel]

The i2c-core will now handle setting the wake_irq and wake capability
for DT and ACPI systems.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

(no changes since v2)

Changes in v2:
- I chose not to keep the legacy code around since systems without DT or ACPI should be rare.

 drivers/input/mouse/elan_i2c_core.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 3947474e93d16a..b25b94aba3e88e 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1332,22 +1332,6 @@ static int elan_probe(struct i2c_client *client,
 		}
 	}
 
-	/*
-	 * Systems using device tree should set up wakeup via DTS,
-	 * the rest will configure device as wakeup source by default.
-	 */
-	if (!dev->of_node)
-		device_init_wakeup(dev, true);
-
-	/*
-	 * The wake IRQ should be declared via device tree instead of assuming
-	 * the IRQ can wake the system. This is here for legacy reasons and
-	 * will be removed once the i2c-core supports querying ACPI for wake
-	 * capabilities.
-	 */
-	if (!dev->power.wakeirq)
-		dev_pm_set_wake_irq(dev, client->irq);
-
 	return 0;
 }
 
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 12/13] Input: elants_i2c - Don't set wake_capable and wake_irq

[Raul E Rangel]

The i2c-core will now handle setting the wake_irq and wake capability
for DT and ACPI systems.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

(no changes since v1)

 drivers/input/touchscreen/elants_i2c.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index 80e16b533c452a..3500293bb1d8e1 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -1575,22 +1575,6 @@ static int elants_i2c_probe(struct i2c_client *client)
 		return error;
 	}
 
-	/*
-	 * Systems using device tree should set up wakeup via DTS,
-	 * the rest will configure device as wakeup source by default.
-	 */
-	if (!client->dev.of_node)
-		device_init_wakeup(&client->dev, true);
-
-	/*
-	 * The wake IRQ should be declared via device tree instead of assuming
-	 * the IRQ can wake the system. This is here for legacy reasons and
-	 * will be removed once the i2c-core supports querying ACPI for wake
-	 * capabilities.
-	 */
-	if (!client->dev.power.wakeirq)
-		dev_pm_set_wake_irq(&client->dev, client->irq);
-
 	error = devm_device_add_group(&client->dev, &elants_attribute_group);
 	if (error) {
 		dev_err(&client->dev, "failed to create sysfs attributes: %d\n",
-- 
2.37.3.968.ga6b4b080e4-goog

[PATCH v4 13/13] Input: raydium_ts_i2c - Don't set wake_capable and wake_irq

[Raul E Rangel]

The i2c-core will now handle setting the wake_irq and wake capability
for DT and ACPI systems.

Signed-off-by: Raul E Rangel <rrangel@chromium.org>
---

(no changes since v1)

 drivers/input/touchscreen/raydium_i2c_ts.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 66c5b577b791d4..88d187dc5d325f 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -1185,15 +1185,6 @@ static int raydium_i2c_probe(struct i2c_client *client,
 		return error;
 	}
 
-	/*
-	 * The wake IRQ should be declared via device tree instead of assuming
-	 * the IRQ can wake the system. This is here for legacy reasons and
-	 * will be removed once the i2c-core supports querying ACPI for wake
-	 * capabilities.
-	 */
-	if (!client->dev.power.wakeirq)
-		dev_pm_set_wake_irq(&client->dev, client->irq);
-
 	error = devm_device_add_group(&client->dev,
 				   &raydium_i2c_attribute_group);
 	if (error) {
-- 
2.37.3.968.ga6b4b080e4-goog

Re: [PATCH v4 00/13] acpi: i2c: Use SharedAndWake and ExclusiveAndWake to enable wake irq

[Benjamin Tissoires]

On Mon, Sep 19, 2022 at 5:59 PM Raul E Rangel <rrangel@chromium.org> wrote:
>
> Today, i2c drivers are making the assumption that their IRQs can also
> be used as wake IRQs. This isn't always the case and it can lead to
> spurious wakes. This has recently started to affect AMD Chromebooks.
> With the introduction of
> d62bd5ce12d7 ("pinctrl: amd: Implement irq_set_wake"), the AMD GPIO
> controller gained the capability to set the wake bit on each GPIO. The
> ACPI specification defines two ways to inform the system if a device is
> wake capable:
> 1) The _PRW object defines the GPE that can be used to wake the system.
> 2) Setting ExclusiveAndWake or SharedAndWake in the _CRS GpioInt.
>
> Currently only the first method is supported. The i2c drivers don't have
> any indication that the IRQ is wake capable, so they guess. This causes
> spurious interrupts, for example:
> * We have an ACPI HID device that has `_PR0` and `_PR3`. It doesn't have
>   `_PRW` or `ExclusiveAndWake` so that means the device can't wake the
>   system.
> * The IRQ line is active level low for this device and is pulled up by
>   the power resource defined in `_PR0`/`_PR3`.
> * The i2c driver will (incorrectly) arm the GPIO for wake by calling
>   `enable_irq_wake` as part of its suspend hook.
> * ACPI will power down the device since it doesn't have a wake GPE
>   associated with it.
> * When the device is powered down, the IRQ line will drop, and it will
>   trigger a wake event.
>
> See the following debug log:
> [   42.335804] PM: Suspending system (s2idle)
> [   42.340186] amd_gpio AMD0030:00: RX: Setting wake for pin 89 to enable
> [   42.467736]     power-0416 __acpi_power_off      : Power resource [PR00] turned off
> [   42.467739] device_pm-0280 device_set_power      : Device [H05D] transitioned to D3cold
> [   42.475210] PM: pm_system_irq_wakeup: 11 triggered pinctrl_amd
> [   42.535293] PM: Wakeup unrelated to ACPI SCI
> [   42.535294] PM: resume from suspend-to-idle
>
> In order to fix this, we need to take into account the wake capable bit
> defined on the Interrupt/GpioInt. This is accomplished by:
> * Migrating some of the i2c drivers over to using the PM subsystem to
>   manage the wake IRQ.
> * Expose the wake_capable bit from the ACPI Interrupt/GpioInt resource
>   to the  i2c core.
> * Use the wake_capable bit in the i2c core to call
>   `dev_pm_set_wake_irq`. This reuses the existing device tree flow.
> * Make the i2c drivers stop calling `dev_pm_set_wake_irq` since it's now
>   handled by the i2c core.
> * Make the ACPI device PM system aware of the wake_irq. This is
>   necessary so the device doesn't incorrectly get powered down when a
>   wake_irq is enabled.
>
> I've tested this code with various combinations of having _PRW,
> ExclusiveAndWake and power resources all defined or not defined, but it
> would be great if others could test this out on their hardware.
>
> I'm sure this will surface some devices where the IRQs were not
> correctly marked as wake capable. Ideally the firmware can be fixed, but
> if not we can work around this in the kernel by providing a board
> specific `struct i2c_board_info` with the `I2C_CLIENT_WAKE` flag set.
> See `chromeos_laptop.c` for an example of matching DMI properties and
> setting the `I2C_CLIENT_WAKE` override.
>
> Thanks,
> Raul
>
> Changes in v4:
> - Added Reviewed-by
> - Reformatted with 96 char limit
> - Removed unnecessary !!
> - Removed unrelated white space change
> - Renamed i2c_acpi_add_resource to i2c_acpi_add_irq_resource
> - Expanded logic in i2c_acpi_add_i2c_resource to make it easier to read
>
> Changes in v3:
> - Kept `acpi_dev_gpio_irq_get_by` unchanged to avoid having to touch
>   unrelated drivers.
> - Converted wake_capable parameter to bool.
> - Fixed bad indent
> - Convert wake_capable to bool
> - Only update wake_capable pointer once
> - Move wake_capable local into local block
>
> Changes in v2:
> - Added elants_i2c to series
> - Added raydium_ts_i2c to series
> - Fixed call site in mlxbf_gige_probe
> - Added ability to extract wake bit from Interrupt/IRQ resources
> - Look at wake_cabple bit for IRQ/Interrupt resources
> - I chose not to keep the legacy code around since systems without DT or ACPI should be rare.
>
> Raul E Rangel (13):
>   HID: i2c-hid: Use PM subsystem to manage wake irq
>   Input: elan_i2c - Use PM subsystem to manage wake irq
>   Input: elants_i2c - Use PM subsystem to manage wake irq
>   Input: raydium_ts_i2c - Use PM subsystem to manage wake irq
>   gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
>   ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
>   i2c: acpi: Use ACPI wake capability bit to set wake_irq
>   ACPI: PM: Take wake IRQ into consideration when entering
>     suspend-to-idle
>   HID: i2c-hid: acpi: Stop setting wakeup_capable
>   HID: i2c-hid: Don't set wake_capable and wake_irq
>   Input: elan_i2c - Don't set wake_capable and wake_irq
>   Input: elants_i2c - Don't set wake_capable and wake_irq
>   Input: raydium_ts_i2c - Don't set wake_capable and wake_irq
>
>  drivers/acpi/device_pm.c                   | 19 +++++++++--
>  drivers/acpi/irq.c                         |  8 +++--
>  drivers/acpi/resource.c                    | 23 ++++++++++----
>  drivers/gpio/gpiolib-acpi.c                | 15 +++++++--
>  drivers/gpio/gpiolib-acpi.h                |  2 ++
>  drivers/hid/i2c-hid/i2c-hid-acpi.c         |  5 ---
>  drivers/hid/i2c-hid/i2c-hid-core.c         | 24 ++------------
>  drivers/i2c/i2c-core-acpi.c                | 37 ++++++++++++++++------
>  drivers/i2c/i2c-core-base.c                |  6 +++-
>  drivers/i2c/i2c-core.h                     |  4 +--
>  drivers/input/mouse/elan_i2c_core.c        | 15 +--------
>  drivers/input/touchscreen/elants_i2c.c     | 13 ++------
>  drivers/input/touchscreen/raydium_i2c_ts.c |  7 +---
>  drivers/pnp/pnpacpi/rsparser.c             |  7 ++--
>  include/linux/acpi.h                       | 23 +++++++++++---
>  include/linux/ioport.h                     |  3 +-
>  16 files changed, 117 insertions(+), 94 deletions(-)
>

For the HID patches (1, 9, 10):
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Feel free to take those through whatever tree is the best, we don't
have anything scheduled for i2c-hid for 6.1 right now.

Cheers,
Benjamin

Re: [PATCH v4 07/13] i2c: acpi: Use ACPI wake capability bit to set wake_irq

[Andy Shevchenko]

On Mon, Sep 19, 2022 at 09:59:09AM -0600, Raul E Rangel wrote:
> Device tree already has a mechanism to pass the wake_irq. It does this
> by looking for the wakeup-source property and setting the
> I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
> ACPI interrupt wake flag to determine if the interrupt can be used to
> wake the system. Previously the i2c drivers had to make assumptions and
> blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
> If there is a device with an Active Low interrupt and the device gets
> powered off while suspending, the interrupt line will go low since it's
> no longer powered and wakes the system. For this reason we should
> respect the board designers wishes and honor the wake bit defined on the
> interrupt.

...

> +	if (irq_ctx.irq == -ENOENT)
> +		irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0, &irq_ctx.wake_capable);

I just realized, that there is an inconsistency on how we fill the wake_capable
parameter. In some cases we check for IRQ for an error condition (IRQ not found)
and in some the wake_capable still be filled.

Here the best approach I believe is to add

	if (irq_ctx.irq < 0)
		return irq_ctx.irq;

I.o.w. we apply the rule "do not fill the output parameters when it's known
to be an error condition".

> +	if (wake_capable)
> +		*wake_capable = irq_ctx.wake_capable;

> +	return irq_ctx.irq;

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 06/13] ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags

[Andy Shevchenko]

On Mon, Sep 19, 2022 at 09:59:08AM -0600, Raul E Rangel wrote:
> ACPI IRQ/Interrupt resources contain a bit that describes if the
> interrupt should wake the system. This change exposes that bit via
> a new IORESOURCE_IRQ_WAKECAPABLE flag. Drivers should check this flag
> before arming an IRQ to wake the system.

(A nit-pick, but because of other patch comment)

...

> -			acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
> -					 ext_irq->triggering, ext_irq->polarity,
> -					 ext_irq->shareable, false);
> +			acpi_dev_get_irqresource(res,
> +						 ext_irq->interrupts[index],
> +						 ext_irq->triggering,
> +						 ext_irq->polarity,
> +						 ext_irq->shareable,
> +						 ext_irq->wake_capable,
> +						 false);

I understand this is done by a script, but it's unrelated indentation changes,
please just change what is related, like:

-					 ext_irq->shareable, false);
+					 ext_irq->shareable, ext_irq->wake_capable,
+					 false);

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v4 07/13] i2c: acpi: Use ACPI wake capability bit to set wake_irq

[Raul Rangel]

On Tue, Sep 20, 2022 at 6:32 AM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> On Mon, Sep 19, 2022 at 09:59:09AM -0600, Raul E Rangel wrote:
> > Device tree already has a mechanism to pass the wake_irq. It does this
> > by looking for the wakeup-source property and setting the
> > I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
> > ACPI interrupt wake flag to determine if the interrupt can be used to
> > wake the system. Previously the i2c drivers had to make assumptions and
> > blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
> > If there is a device with an Active Low interrupt and the device gets
> > powered off while suspending, the interrupt line will go low since it's
> > no longer powered and wakes the system. For this reason we should
> > respect the board designers wishes and honor the wake bit defined on the
> > interrupt.
>
> ...
>
> > +     if (irq_ctx.irq == -ENOENT)
> > +             irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0, &irq_ctx.wake_capable);
>
> I just realized, that there is an inconsistency on how we fill the wake_capable
> parameter. In some cases we check for IRQ for an error condition (IRQ not found)
> and in some the wake_capable still be filled.
>
> Here the best approach I believe is to add
>
>         if (irq_ctx.irq < 0)
>                 return irq_ctx.irq;
>
> I.o.w. we apply the rule "do not fill the output parameters when it's known
> to be an error condition".
>
> > +     if (wake_capable)
> > +             *wake_capable = irq_ctx.wake_capable;
>
> > +     return irq_ctx.irq;
>

I applied the following:
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index ba64e505183595..1618f5619d5ed9 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -220,7 +220,7 @@ int i2c_acpi_get_irq(struct i2c_client *client,
bool *wake_capable)
        if (irq_ctx.irq == -ENOENT)
                irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0,
&irq_ctx.wake_capable);

-       if (wake_capable)
+       if (irq_ctx.irq > 0 && wake_capable)
                *wake_capable = irq_ctx.wake_capable;

        return irq_ctx.irq;

Thanks!

Re: [PATCH v4 00/13] acpi: i2c: Use SharedAndWake and ExclusiveAndWake to enable wake irq

[Raul Rangel]

On Tue, Sep 20, 2022 at 4:43 AM Benjamin Tissoires
<benjamin.tissoires@redhat.com> wrote:
>
> On Mon, Sep 19, 2022 at 5:59 PM Raul E Rangel <rrangel@chromium.org> wrote:
> >
> > Today, i2c drivers are making the assumption that their IRQs can also
> > be used as wake IRQs. This isn't always the case and it can lead to
> > spurious wakes. This has recently started to affect AMD Chromebooks.
> > With the introduction of
> > d62bd5ce12d7 ("pinctrl: amd: Implement irq_set_wake"), the AMD GPIO
> > controller gained the capability to set the wake bit on each GPIO. The
> > ACPI specification defines two ways to inform the system if a device is
> > wake capable:
> > 1) The _PRW object defines the GPE that can be used to wake the system.
> > 2) Setting ExclusiveAndWake or SharedAndWake in the _CRS GpioInt.
> >
> > Currently only the first method is supported. The i2c drivers don't have
> > any indication that the IRQ is wake capable, so they guess. This causes
> > spurious interrupts, for example:
> > * We have an ACPI HID device that has `_PR0` and `_PR3`. It doesn't have
> >   `_PRW` or `ExclusiveAndWake` so that means the device can't wake the
> >   system.
> > * The IRQ line is active level low for this device and is pulled up by
> >   the power resource defined in `_PR0`/`_PR3`.
> > * The i2c driver will (incorrectly) arm the GPIO for wake by calling
> >   `enable_irq_wake` as part of its suspend hook.
> > * ACPI will power down the device since it doesn't have a wake GPE
> >   associated with it.
> > * When the device is powered down, the IRQ line will drop, and it will
> >   trigger a wake event.
> >
> > See the following debug log:
> > [   42.335804] PM: Suspending system (s2idle)
> > [   42.340186] amd_gpio AMD0030:00: RX: Setting wake for pin 89 to enable
> > [   42.467736]     power-0416 __acpi_power_off      : Power resource [PR00] turned off
> > [   42.467739] device_pm-0280 device_set_power      : Device [H05D] transitioned to D3cold
> > [   42.475210] PM: pm_system_irq_wakeup: 11 triggered pinctrl_amd
> > [   42.535293] PM: Wakeup unrelated to ACPI SCI
> > [   42.535294] PM: resume from suspend-to-idle
> >
> > In order to fix this, we need to take into account the wake capable bit
> > defined on the Interrupt/GpioInt. This is accomplished by:
> > * Migrating some of the i2c drivers over to using the PM subsystem to
> >   manage the wake IRQ.
> > * Expose the wake_capable bit from the ACPI Interrupt/GpioInt resource
> >   to the  i2c core.
> > * Use the wake_capable bit in the i2c core to call
> >   `dev_pm_set_wake_irq`. This reuses the existing device tree flow.
> > * Make the i2c drivers stop calling `dev_pm_set_wake_irq` since it's now
> >   handled by the i2c core.
> > * Make the ACPI device PM system aware of the wake_irq. This is
> >   necessary so the device doesn't incorrectly get powered down when a
> >   wake_irq is enabled.
> >
> > I've tested this code with various combinations of having _PRW,
> > ExclusiveAndWake and power resources all defined or not defined, but it
> > would be great if others could test this out on their hardware.
> >
> > I'm sure this will surface some devices where the IRQs were not
> > correctly marked as wake capable. Ideally the firmware can be fixed, but
> > if not we can work around this in the kernel by providing a board
> > specific `struct i2c_board_info` with the `I2C_CLIENT_WAKE` flag set.
> > See `chromeos_laptop.c` for an example of matching DMI properties and
> > setting the `I2C_CLIENT_WAKE` override.
> >
> > Thanks,
> > Raul
> >
> > Changes in v4:
> > - Added Reviewed-by
> > - Reformatted with 96 char limit
> > - Removed unnecessary !!
> > - Removed unrelated white space change
> > - Renamed i2c_acpi_add_resource to i2c_acpi_add_irq_resource
> > - Expanded logic in i2c_acpi_add_i2c_resource to make it easier to read
> >
> > Changes in v3:
> > - Kept `acpi_dev_gpio_irq_get_by` unchanged to avoid having to touch
> >   unrelated drivers.
> > - Converted wake_capable parameter to bool.
> > - Fixed bad indent
> > - Convert wake_capable to bool
> > - Only update wake_capable pointer once
> > - Move wake_capable local into local block
> >
> > Changes in v2:
> > - Added elants_i2c to series
> > - Added raydium_ts_i2c to series
> > - Fixed call site in mlxbf_gige_probe
> > - Added ability to extract wake bit from Interrupt/IRQ resources
> > - Look at wake_cabple bit for IRQ/Interrupt resources
> > - I chose not to keep the legacy code around since systems without DT or ACPI should be rare.
> >
> > Raul E Rangel (13):
> >   HID: i2c-hid: Use PM subsystem to manage wake irq
> >   Input: elan_i2c - Use PM subsystem to manage wake irq
> >   Input: elants_i2c - Use PM subsystem to manage wake irq
> >   Input: raydium_ts_i2c - Use PM subsystem to manage wake irq
> >   gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
> >   ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags
> >   i2c: acpi: Use ACPI wake capability bit to set wake_irq
> >   ACPI: PM: Take wake IRQ into consideration when entering
> >     suspend-to-idle
> >   HID: i2c-hid: acpi: Stop setting wakeup_capable
> >   HID: i2c-hid: Don't set wake_capable and wake_irq
> >   Input: elan_i2c - Don't set wake_capable and wake_irq
> >   Input: elants_i2c - Don't set wake_capable and wake_irq
> >   Input: raydium_ts_i2c - Don't set wake_capable and wake_irq
> >
> >  drivers/acpi/device_pm.c                   | 19 +++++++++--
> >  drivers/acpi/irq.c                         |  8 +++--
> >  drivers/acpi/resource.c                    | 23 ++++++++++----
> >  drivers/gpio/gpiolib-acpi.c                | 15 +++++++--
> >  drivers/gpio/gpiolib-acpi.h                |  2 ++
> >  drivers/hid/i2c-hid/i2c-hid-acpi.c         |  5 ---
> >  drivers/hid/i2c-hid/i2c-hid-core.c         | 24 ++------------
> >  drivers/i2c/i2c-core-acpi.c                | 37 ++++++++++++++++------
> >  drivers/i2c/i2c-core-base.c                |  6 +++-
> >  drivers/i2c/i2c-core.h                     |  4 +--
> >  drivers/input/mouse/elan_i2c_core.c        | 15 +--------
> >  drivers/input/touchscreen/elants_i2c.c     | 13 ++------
> >  drivers/input/touchscreen/raydium_i2c_ts.c |  7 +---
> >  drivers/pnp/pnpacpi/rsparser.c             |  7 ++--
> >  include/linux/acpi.h                       | 23 +++++++++++---
> >  include/linux/ioport.h                     |  3 +-
> >  16 files changed, 117 insertions(+), 94 deletions(-)
> >
>

> For the HID patches (1, 9, 10):
> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
>
> Feel free to take those through whatever tree is the best, we don't
> have anything scheduled for i2c-hid for 6.1 right now.
>
> Cheers,
> Benjamin
>
Great thanks! I'll include your Acked-By in the next round.

Re: [PATCH v4 07/13] i2c: acpi: Use ACPI wake capability bit to set wake_irq

[Andy Shevchenko]

On Wed, Sep 21, 2022 at 09:18:34AM -0600, Raul Rangel wrote:
> On Tue, Sep 20, 2022 at 6:32 AM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> > On Mon, Sep 19, 2022 at 09:59:09AM -0600, Raul E Rangel wrote:

...

> > > +     if (irq_ctx.irq == -ENOENT)
> > > +             irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0, &irq_ctx.wake_capable);
> >
> > I just realized, that there is an inconsistency on how we fill the wake_capable
> > parameter. In some cases we check for IRQ for an error condition (IRQ not found)
> > and in some the wake_capable still be filled.
> >
> > Here the best approach I believe is to add
> >
> >         if (irq_ctx.irq < 0)
> >                 return irq_ctx.irq;
> >
> > I.o.w. we apply the rule "do not fill the output parameters when it's known
> > to be an error condition".
> >
> > > +     if (wake_capable)
> > > +             *wake_capable = irq_ctx.wake_capable;
> >
> > > +     return irq_ctx.irq;
> >
> 
> I applied the following:
> diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
> index ba64e505183595..1618f5619d5ed9 100644
> --- a/drivers/i2c/i2c-core-acpi.c
> +++ b/drivers/i2c/i2c-core-acpi.c
> @@ -220,7 +220,7 @@ int i2c_acpi_get_irq(struct i2c_client *client,
> bool *wake_capable)
>         if (irq_ctx.irq == -ENOENT)
>                 irq_ctx.irq = acpi_dev_gpio_irq_wake_get(adev, 0,
> &irq_ctx.wake_capable);
> 
> -       if (wake_capable)
> +       if (irq_ctx.irq > 0 && wake_capable)
>                 *wake_capable = irq_ctx.wake_capable;
> 
>         return irq_ctx.irq;

While it's working solution it is not so flexible since basically any addition
of a new code will require if (irq > 0), that's why I'm in favour of my
proposal rather than yours approach.


-- 
With Best Regards,
Andy Shevchenko