* [PATCH v4 1/2] dt-bindings: mfd: Add bindings for MAX5970 and MAX5978
2022-11-01 16:53 [PATCH v4 0/2] mfd: max597x: Add support for max597x Naresh Solanki
@ 2022-11-01 16:53 ` Naresh Solanki
2022-11-02 2:26 ` Rob Herring
2022-11-02 17:19 ` Krzysztof Kozlowski
2022-11-01 16:53 ` [PATCH v4 2/2] mfd: max597x: Add support " Naresh Solanki
1 sibling, 2 replies; 5+ messages in thread
From: Naresh Solanki @ 2022-11-01 16:53 UTC (permalink / raw)
To: linux-kernel, devicetree, Lee Jones, Rob Herring,
Krzysztof Kozlowski, Patrick Rudolph
Cc: Marcello Sylvester Bauer, Naresh Solanki
From: Marcello Sylvester Bauer <sylv@sylv.io>
The MAX597x is a hot swap controller with configurable fault protection.
It also has 10bit ADC for current & voltage measurements.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
.../devicetree/bindings/mfd/max5970.yaml | 164 ++++++++++++++++++
1 file changed, 164 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max5970.yaml
diff --git a/Documentation/devicetree/bindings/mfd/max5970.yaml b/Documentation/devicetree/bindings/mfd/max5970.yaml
new file mode 100644
index 000000000000..a0cc6a7543b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max5970.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/max5970.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator driver for MAX5970 smart switch from Maxim Integrated.
+
+maintainers:
+ - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+ The smart switch provides no output regulation, but independent fault protection
+ and voltage and current sensing.
+ Programming is done through I2C bus.
+
+ Datasheets:
+ https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
+ https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
+
+properties:
+ compatible:
+ enum:
+ - maxim,max5970
+ - maxim,max5978
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ leds:
+ type: object
+ description:
+ Properties for single channel.
+
+ patternProperties:
+ "^led@[0-3]$":
+ $ref: /schemas/leds/common.yaml#
+ type: object
+
+ additionalProperties: true
+
+ vss1-supply:
+ description: Supply of the first channel.
+
+ "#io-channel-cells":
+ const: 1
+
+ regulators:
+ type: object
+ description:
+ Properties for single channel.
+
+ patternProperties:
+ "^(sw[0-1])$":
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+
+ shunt-resistor-micro-ohms:
+ description: |
+ The value of curent sense resistor in microohms.
+ Must be specified for each channel.
+
+ additionalProperties: true
+
+required:
+ - compatible
+ - reg
+ - regulators
+ - vss1-supply
+
+allOf:
+ - $ref: /schemas/regulator/regulator.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - maxim,max5970
+ then:
+ properties:
+ vss2-supply:
+ description: Supply of the second channel.
+
+ io-channels:
+ items:
+ - description: voltage first channel
+ - description: current first channel
+ - description: voltage second channel
+ - description: current second channel
+ description: |
+ Voltage and current for first and second channel.
+ required:
+ - vss2-supply
+
+ else:
+ properties:
+ io-channels:
+ items:
+ - description: voltage first channel
+ - description: current first channel
+ description: |
+ Voltage and current for first channel.
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led@0 {
+ reg = <0>;
+ label = "led0";
+ default-state = "on";
+ };
+ led@1 {
+ reg = <1>;
+ label = "led1";
+ default-state = "on";
+ };
+ };
+ regulator@3a {
+ reg = <0x3a>;
+ vss1-supply = <&p3v3>;
+ compatible = "maxim,max5978";
+
+ regulators {
+ sw0_ref_0: SW0 {
+ regulator-compatible = "SW0";
+ shunt-resistor-micro-ohms = <12000>;
+ };
+ };
+ };
+ };
+
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@3a {
+ reg = <0x3a>;
+ vss1-supply = <&p3v3>;
+ vss2-supply = <&p5v>;
+ compatible = "maxim,max5970";
+
+ regulators {
+ sw0_ref_1: SW0 {
+ regulator-compatible = "SW0";
+ shunt-resistor-micro-ohms = <12000>;
+ };
+ sw1_ref_1: SW1 {
+ regulator-compatible = "SW1";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+ };
+ };
+ };
+...
--
2.37.3
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v4 2/2] mfd: max597x: Add support for MAX5970 and MAX5978
2022-11-01 16:53 [PATCH v4 0/2] mfd: max597x: Add support for max597x Naresh Solanki
2022-11-01 16:53 ` [PATCH v4 1/2] dt-bindings: mfd: Add bindings for MAX5970 and MAX5978 Naresh Solanki
@ 2022-11-01 16:53 ` Naresh Solanki
1 sibling, 0 replies; 5+ messages in thread
From: Naresh Solanki @ 2022-11-01 16:53 UTC (permalink / raw)
To: linux-kernel, devicetree, Lee Jones
Cc: Patrick Rudolph, Marcello Sylvester Bauer, Naresh Solanki
From: Patrick Rudolph <patrick.rudolph@9elements.com>
Implement a regulator driver with IRQ support for fault management.
Written against documentation [1] and [2] and tested on real hardware.
Every channel has its own regulator supplies nammed 'vss1-supply' and
'vss2-supply'. The regulator supply is used to determine the output
voltage, as the smart switch provides no output regulation.
The driver requires the 'shunt-resistor-micro-ohms' property to be
present in Device Tree to properly calculate current related
values.
Datasheet links:
1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
---
drivers/mfd/Kconfig | 12 +++++
drivers/mfd/Makefile | 1 +
drivers/mfd/max597x.c | 92 ++++++++++++++++++++++++++++++++
include/linux/mfd/max597x.h | 103 ++++++++++++++++++++++++++++++++++++
4 files changed, 208 insertions(+)
create mode 100644 drivers/mfd/max597x.c
create mode 100644 include/linux/mfd/max597x.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8b93856de432..416fe7986b7b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -253,6 +253,18 @@ config MFD_MADERA_SPI
Support for the Cirrus Logic Madera platform audio SoC
core functionality controlled via SPI.
+config MFD_MAX597X
+ tristate "Maxim 597x Power Switch and Monitor"
+ depends on I2C
+ depends on OF
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ This driver controls a Maxim 5970/5978 switch via I2C bus.
+ The MAX5970/5978 is a smart switch with no output regulation, but
+ fault protection and voltage and current monitoring capabilities.
+ Also it supports upto 4 indication LEDs.
+
config MFD_CS47L15
bool "Cirrus Logic CS47L15"
select PINCTRL_CS47L15
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 7ed3ef4a698c..819d711fa748 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -161,6 +161,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o
obj-$(CONFIG_MFD_DA9150) += da9150-core.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
+obj-$(CONFIG_MFD_MAX597X) += max597x.o
obj-$(CONFIG_MFD_MAX77620) += max77620.o
obj-$(CONFIG_MFD_MAX77650) += max77650.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o
diff --git a/drivers/mfd/max597x.c b/drivers/mfd/max597x.c
new file mode 100644
index 000000000000..2c64edb6b6dd
--- /dev/null
+++ b/drivers/mfd/max597x.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Maxim MAX5970/MAX5978 MFD Driver
+ *
+ * Copyright (c) 2022 9elements GmbH
+ *
+ * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max597x.h>
+#include <linux/regmap.h>
+
+static const struct regmap_config max597x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX_REGISTERS,
+};
+
+static const struct mfd_cell max597x_cells[] = {
+ { .name = "max597x-regulator", },
+ { .name = "max597x-iio", },
+ { .name = "max597x-led", },
+};
+
+static int max597x_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+ struct max597x_data *ddata;
+ enum max597x_chip_type chip = id->driver_data;
+
+ ddata = devm_kzalloc(&i2c->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ /* Initialize num of switch based on chip type for later use by regulator
+ * & iio cells
+ */
+ switch (chip) {
+ case MAX597x_TYPE_MAX5970:
+ ddata->num_switches = MAX5970_NUM_SWITCHES;
+ break;
+ case MAX597x_TYPE_MAX5978:
+ ddata->num_switches = MAX5978_NUM_SWITCHES;
+ break;
+ }
+
+ ddata->regmap = devm_regmap_init_i2c(i2c, &max597x_regmap_config);
+ if (IS_ERR(ddata->regmap)) {
+ dev_err(&i2c->dev, "Failed to initialise regmap");
+ return -EINVAL;
+ }
+
+ /* IRQ used by regulator cell */
+ ddata->irq = i2c->irq;
+ ddata->dev = &i2c->dev;
+ i2c_set_clientdata(i2c, ddata);
+
+ return devm_mfd_add_devices(ddata->dev, PLATFORM_DEVID_AUTO,
+ max597x_cells, ARRAY_SIZE(max597x_cells),
+ NULL, 0, NULL);
+}
+
+static const struct i2c_device_id max597x_table[] = {
+ { .name = "max5970", MAX597x_TYPE_MAX5970 },
+ { .name = "max5978", MAX597x_TYPE_MAX5978 },
+};
+
+MODULE_DEVICE_TABLE(i2c, max597x_table);
+
+static const struct of_device_id max597x_of_match[] = {
+ { .compatible = "maxim,max5970", .data = (void *)MAX597x_TYPE_MAX5970 },
+ { .compatible = "maxim,max5978", .data = (void *)MAX597x_TYPE_MAX5978 },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, max597x_of_match);
+
+static struct i2c_driver max597x_driver = {
+ .id_table = max597x_table,
+ .driver = {
+ .name = "max597x",
+ .of_match_table = of_match_ptr(max597x_of_match),
+ },
+ .probe = max597x_probe,
+};
+
+module_i2c_driver(max597x_driver);
+
+MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
+MODULE_DESCRIPTION("MAX597X Power Switch and Monitor");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max597x.h
new file mode 100644
index 000000000000..f88a57f0e4f2
--- /dev/null
+++ b/include/linux/mfd/max597x.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Maxim MAX5970/MAX5978 MFD Driver
+ *
+ * Copyright (c) 2022 9elements GmbH
+ *
+ * Author: Patrick Rudolph <patrick.rudolph@9elements.com>
+ */
+
+#ifndef MFD_MAX597X_H
+#define MFD_MAX597X_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+/* Number of switch based on chip variant */
+#define MAX5970_NUM_SWITCHES 2
+#define MAX5978_NUM_SWITCHES 1
+/* Both chip variant have 4 indication LEDs used by LED cell */
+#define MAX597X_NUM_LEDS 4
+
+enum max597x_chip_type {
+ MAX597x_TYPE_MAX5978 = 1,
+ MAX597x_TYPE_MAX5970,
+};
+
+#define MAX5970_REG_CURRENT_L(ch) (0x01 + (ch) * 4)
+#define MAX5970_REG_CURRENT_H(ch) (0x00 + (ch) * 4)
+#define MAX5970_REG_VOLTAGE_L(ch) (0x03 + (ch) * 4)
+#define MAX5970_REG_VOLTAGE_H(ch) (0x02 + (ch) * 4)
+#define MAX5970_REG_MON_RANGE 0x18
+#define MAX5970_MON_MASK 0x3
+#define MAX5970_MON(reg, ch) (((reg) >> ((ch) * 2)) & MAX5970_MON_MASK)
+#define MAX5970_MON_MAX_RANGE_UV 16000000
+
+#define MAX5970_REG_CH_UV_WARN_H(ch) (0x1A + (ch) * 10)
+#define MAX5970_REG_CH_UV_WARN_L(ch) (0x1B + (ch) * 10)
+#define MAX5970_REG_CH_UV_CRIT_H(ch) (0x1C + (ch) * 10)
+#define MAX5970_REG_CH_UV_CRIT_L(ch) (0x1D + (ch) * 10)
+#define MAX5970_REG_CH_OV_WARN_H(ch) (0x1E + (ch) * 10)
+#define MAX5970_REG_CH_OV_WARN_L(ch) (0x1F + (ch) * 10)
+#define MAX5970_REG_CH_OV_CRIT_H(ch) (0x20 + (ch) * 10)
+#define MAX5970_REG_CH_OV_CRIT_L(ch) (0x21 + (ch) * 10)
+
+#define MAX5970_VAL2REG_H(x) (((x) >> 2) & 0xFF)
+#define MAX5970_VAL2REG_L(x) ((x) & 0x3)
+
+#define MAX5970_REG_DAC_FAST(ch) (0x2E + (ch))
+
+#define MAX5970_FAST2SLOW_RATIO 200
+
+#define MAX5970_REG_STATUS0 0x31
+#define MAX5970_CB_IFAULTF(ch) (1 << (ch))
+#define MAX5970_CB_IFAULTS(ch) (1 << ((ch) + 4))
+
+#define MAX5970_REG_STATUS1 0x32
+#define STATUS1_PROT_MASK 0x3
+#define STATUS1_PROT(reg) \
+ (((reg) >> 6) & STATUS1_PROT_MASK)
+#define STATUS1_PROT_SHUTDOWN 0
+#define STATUS1_PROT_CLEAR_PG 1
+#define STATUS1_PROT_ALERT_ONLY 2
+
+#define MAX5970_REG_STATUS2 0x33
+#define MAX5970_IRNG_MASK 0x3
+#define MAX5970_IRNG(reg, ch) \
+ (((reg) >> ((ch) * 2)) & MAX5970_IRNG_MASK)
+
+#define MAX5970_REG_STATUS3 0x34
+#define MAX5970_STATUS3_ALERT BIT(4)
+#define MAX5970_STATUS3_PG(ch) BIT(ch)
+
+#define MAX5970_REG_FAULT0 0x35
+#define UV_STATUS_WARN(ch) BIT(ch)
+#define UV_STATUS_CRIT(ch) BIT(ch + 4)
+
+#define MAX5970_REG_FAULT1 0x36
+#define OV_STATUS_WARN(ch) BIT(ch)
+#define OV_STATUS_CRIT(ch) BIT(ch + 4)
+
+#define MAX5970_REG_FAULT2 0x37
+#define OC_STATUS_WARN(ch) BIT(ch)
+
+#define MAX5970_REG_CHXEN 0x3b
+#define CHXEN(ch) (3 << (ch * 2))
+
+#define MAX5970_REG_LED_FLASH 0x43
+
+#define MAX_REGISTERS 0x49
+#define ADC_MASK 0x3FF
+
+struct max597x_data {
+ struct device *dev;
+ int irq;
+ int num_switches;
+ struct regmap *regmap;
+ /* Chip specific parameters needed by regulator & iio cells */
+ u32 irng[MAX5970_NUM_SWITCHES];
+ u32 mon_rng[MAX5970_NUM_SWITCHES];
+ u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES];
+};
+
+#endif /* _MAX597X_H */
--
2.37.3
^ permalink raw reply related [flat|nested] 5+ messages in thread