From: Xingyu Wu <xingyu.wu@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Emil Renner Berthing <kernel@esmil.dk>
Cc: Rob Herring <robh+dt@kernel.org>, Conor Dooley <conor@kernel.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Hal Feng <hal.feng@starfivetech.com>,
Xingyu Wu <xingyu.wu@starfivetech.com>,
<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>
Subject: [PATCH v1 01/11] dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator
Date: Fri, 20 Jan 2023 10:44:35 +0800 [thread overview]
Message-ID: <20230120024445.244345-2-xingyu.wu@starfivetech.com> (raw)
In-Reply-To: <20230120024445.244345-1-xingyu.wu@starfivetech.com>
Add bindings for the System-Top-Group clock and reset generator (STGCRG)
on the JH7110 RISC-V SoC by StarFive Ltd.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
---
.../clock/starfive,jh7110-stgcrg.yaml | 82 +++++++++++++++++++
MAINTAINERS | 2 +
.../dt-bindings/clock/starfive,jh7110-crg.h | 34 ++++++++
.../dt-bindings/reset/starfive,jh7110-crg.h | 28 +++++++
4 files changed, 146 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml
new file mode 100644
index 000000000000..b64ccd84200a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-stgcrg.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-stgcrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 System-Top-Group Clock and Reset Generator
+
+maintainers:
+ - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+ compatible:
+ const: starfive,jh7110-stgcrg
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Main Oscillator (24 MHz)
+ - description: HIFI4 core
+ - description: STG AXI/AHB
+ - description: USB (125 MHz)
+ - description: CPU Bus
+ - description: HIFI4 Axi
+ - description: NOC STG Bus
+ - description: APB Bus
+
+ clock-names:
+ items:
+ - const: osc
+ - const: hifi4_core
+ - const: stg_axiahb
+ - const: usb_125m
+ - const: cpu_bus
+ - const: hifi4_axi
+ - const: nocstg_bus
+ - const: apb_bus
+
+ '#clock-cells':
+ const: 1
+ description:
+ See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+ '#reset-cells':
+ const: 1
+ description:
+ See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+ stgcrg: clock-controller@10230000 {
+ compatible = "starfive,jh7110-stgcrg";
+ reg = <0x10230000 0x10000>;
+ clocks = <&osc>,
+ <&syscrg JH7110_SYSCLK_HIFI4_CORE>,
+ <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+ <&syscrg JH7110_SYSCLK_USB_125M>,
+ <&syscrg JH7110_SYSCLK_CPU_BUS>,
+ <&syscrg JH7110_SYSCLK_HIFI4_AXI>,
+ <&syscrg JH7110_SYSCLK_NOCSTG_BUS>,
+ <&syscrg JH7110_SYSCLK_APB_BUS>;
+ clock-names = "osc", "hifi4_core",
+ "stg_axiahb", "usb_125m",
+ "cpu_bus", "hifi4_axi",
+ "nocstg_bus", "apb_bus";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 84fd7054cb6e..20243eb5470c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19635,6 +19635,7 @@ F: arch/riscv/boot/dts/starfive/
STARFIVE JH71X0 CLOCK DRIVERS
M: Emil Renner Berthing <kernel@esmil.dk>
M: Hal Feng <hal.feng@starfivetech.com>
+M: Xingyu Wu <xingyu.wu@starfivetech.com>
S: Maintained
F: Documentation/devicetree/bindings/clock/starfive,jh71*.yaml
F: drivers/clk/starfive/clk-starfive-jh71*
@@ -19654,6 +19655,7 @@ F: include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h
STARFIVE JH71X0 RESET CONTROLLER DRIVERS
M: Emil Renner Berthing <kernel@esmil.dk>
M: Hal Feng <hal.feng@starfivetech.com>
+M: Xingyu Wu <xingyu.wu@starfivetech.com>
S: Maintained
F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
F: drivers/reset/starfive/reset-starfive-jh71*
diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
index 5e4f21ca0642..5ac8a4d90a7a 100644
--- a/include/dt-bindings/clock/starfive,jh7110-crg.h
+++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 OR MIT */
/*
* Copyright 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright 2022 StarFive Technology Co., Ltd.
*/
#ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
@@ -222,4 +223,37 @@
#define JH7110_AONCLK_END 14
+/* STGCRG clocks */
+#define JH7110_STGCLK_HIFI4_CLK_CORE 0
+#define JH7110_STGCLK_USB0_APB 1
+#define JH7110_STGCLK_USB0_UTMI_APB 2
+#define JH7110_STGCLK_USB0_AXI 3
+#define JH7110_STGCLK_USB0_LPM 4
+#define JH7110_STGCLK_USB0_STB 5
+#define JH7110_STGCLK_USB0_APP_125 6
+#define JH7110_STGCLK_USB0_REFCLK 7
+#define JH7110_STGCLK_PCIE0_AXI_MST0 8
+#define JH7110_STGCLK_PCIE0_APB 9
+#define JH7110_STGCLK_PCIE0_TL 10
+#define JH7110_STGCLK_PCIE1_AXI_MST0 11
+#define JH7110_STGCLK_PCIE1_APB 12
+#define JH7110_STGCLK_PCIE1_TL 13
+#define JH7110_STGCLK_PCIE01_SLV_DEC_MAINCLK 14
+#define JH7110_STGCLK_SEC_HCLK 15
+#define JH7110_STGCLK_SEC_MISCAHB 16
+#define JH7110_STGCLK_GRP0_MAIN 17
+#define JH7110_STGCLK_GRP0_BUS 18
+#define JH7110_STGCLK_GRP0_STG 19
+#define JH7110_STGCLK_GRP1_MAIN 20
+#define JH7110_STGCLK_GRP1_BUS 21
+#define JH7110_STGCLK_GRP1_STG 22
+#define JH7110_STGCLK_GRP1_HIFI 23
+#define JH7110_STGCLK_E2_RTC 24
+#define JH7110_STGCLK_E2_CORE 25
+#define JH7110_STGCLK_E2_DBG 26
+#define JH7110_STGCLK_DMA1P_AXI 27
+#define JH7110_STGCLK_DMA1P_AHB 28
+
+#define JH7110_STGCLK_END 29
+
#endif /* __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__ */
diff --git a/include/dt-bindings/reset/starfive,jh7110-crg.h b/include/dt-bindings/reset/starfive,jh7110-crg.h
index d78e38690ceb..cb70a1759482 100644
--- a/include/dt-bindings/reset/starfive,jh7110-crg.h
+++ b/include/dt-bindings/reset/starfive,jh7110-crg.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 OR MIT */
/*
* Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
*/
#ifndef __DT_BINDINGS_RESET_STARFIVE_JH7110_CRG_H__
@@ -151,4 +152,31 @@
#define JH7110_AONRST_END 8
+/* STGCRG resets */
+#define JH7110_STGRST_SYSCON 0
+#define JH7110_STGRST_HIFI4_CORE 1
+#define JH7110_STGRST_HIFI4_AXI 2
+#define JH7110_STGRST_SEC_TOP_HRESETN 3
+#define JH7110_STGRST_E24_CORE 4
+#define JH7110_STGRST_DMA1P_AXI 5
+#define JH7110_STGRST_DMA1P_AHB 6
+#define JH7110_STGRST_USB0_AXI 7
+#define JH7110_STGRST_USB0_APB 8
+#define JH7110_STGRST_USB0_UTMI_APB 9
+#define JH7110_STGRST_USB0_PWRUP 10
+#define JH7110_STGRST_PCIE0_AXI_MST0 11
+#define JH7110_STGRST_PCIE0_AXI_SLV0 12
+#define JH7110_STGRST_PCIE0_AXI_SLV 13
+#define JH7110_STGRST_PCIE0_BRG 14
+#define JH7110_STGRST_PCIE0_CORE 15
+#define JH7110_STGRST_PCIE0_APB 16
+#define JH7110_STGRST_PCIE1_AXI_MST0 17
+#define JH7110_STGRST_PCIE1_AXI_SLV0 18
+#define JH7110_STGRST_PCIE1_AXI_SLV 19
+#define JH7110_STGRST_PCIE1_BRG 20
+#define JH7110_STGRST_PCIE1_CORE 21
+#define JH7110_STGRST_PCIE1_APB 22
+
+#define JH7110_STGRST_END 23
+
#endif /* __DT_BINDINGS_RESET_STARFIVE_JH7110_CRG_H__ */
--
2.25.1
next prev parent reply other threads:[~2023-01-20 2:45 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-20 2:44 [PATCH v1 00/11] Add new partial clock and reset drivers for StarFive JH7110 Xingyu Wu
2023-01-20 2:44 ` Xingyu Wu [this message]
2023-01-20 8:11 ` [PATCH v1 01/11] dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator Krzysztof Kozlowski
2023-01-30 6:17 ` Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 02/11] reset: starfive: jh7110: Add StarFive System-Top-Group reset support Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 03/11] clk: starfive: Add StarFive JH7110 System-Top-Group clock driver Xingyu Wu
2023-01-26 2:33 ` Stephen Boyd
2023-01-30 8:02 ` Xingyu Wu
2023-01-31 0:35 ` Stephen Boyd
2023-01-31 6:51 ` Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 04/11] dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator Xingyu Wu
2023-01-20 8:12 ` Krzysztof Kozlowski
2023-01-30 8:03 ` Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 05/11] reset: starfive: jh7110: Add StarFive Image-Signal-Process reset support Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 06/11] clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver Xingyu Wu
2023-01-26 2:35 ` Stephen Boyd
2023-01-30 8:09 ` Xingyu Wu
2023-01-31 0:38 ` Stephen Boyd
2023-01-31 6:52 ` Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 07/11] dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator Xingyu Wu
2023-01-20 8:13 ` Krzysztof Kozlowski
2023-01-30 8:10 ` Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 08/11] reset: starfive: jh7110: Add StarFive Video-Output reset support Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 09/11] clk: starfive: Add StarFive JH7110 Video-Output clock driver Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 10/11] riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 11/11] riscv: dts: starfive: jh7110: Add STGCRG/ISPCRG/VOUTCRG nodes Xingyu Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230120024445.244345-2-xingyu.wu@starfivetech.com \
--to=xingyu.wu@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hal.feng@starfivetech.com \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).