From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Xingyu Wu <xingyu.wu@starfivetech.com>,
linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Emil Renner Berthing <kernel@esmil.dk>
Cc: Rob Herring <robh+dt@kernel.org>, Conor Dooley <conor@kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Hal Feng <hal.feng@starfivetech.com>,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH v1 04/11] dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator
Date: Fri, 20 Jan 2023 09:12:39 +0100 [thread overview]
Message-ID: <f85f5283-98b2-46b1-5a91-64ae708a6353@linaro.org> (raw)
In-Reply-To: <20230120024445.244345-5-xingyu.wu@starfivetech.com>
On 20/01/2023 03:44, Xingyu Wu wrote:
> Add bindings for the Image-Signal-Process clock and reset
> generator (ISPCRG) on the JH7110 RISC-V SoC by StarFive Ltd.
>
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> ---
> .../clock/starfive,jh7110-ispcrg.yaml | 97 +++++++++++++++++++
> .../dt-bindings/clock/starfive,jh7110-crg.h | 18 ++++
> .../dt-bindings/reset/starfive,jh7110-crg.h | 16 +++
> 3 files changed, 131 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml
> new file mode 100644
> index 000000000000..32794f809364
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-ispcrg.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/starfive,jh7110-ispcrg.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 Image-Signal-Process Clock and Reset Generator
> +
> +maintainers:
> + - Xingyu Wu <xingyu.wu@starfivetech.com>
> +
> +properties:
> + compatible:
> + const: starfive,jh7110-ispcrg
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: ISP Top core
> + - description: ISP Top Axi
> + - description: NOC ISP Bus
> + - description: external DVP
> +
> + clock-names:
> + items:
> + - const: isp_top_core
> + - const: isp_top_axi
> + - const: noc_bus_isp_axi
> + - const: dvp_clk
> +
> + resets:
> + items:
> + - description: ISP Top core
> + - description: ISP Top Axi
> + - description: NOC ISP Bus
> +
> + reset-names:
> + items:
> + - const: isp_top_core
> + - const: isp_top_axi
> + - const: noc_bus_isp_axi
> +
> + '#clock-cells':
> + const: 1
> + description:
> + See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
> +
> + '#reset-cells':
> + const: 1
> + description:
> + See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
> +
> + power-domains:
> + maxItems: 1
> + description:
> + ISP domain power
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - '#clock-cells'
> + - '#reset-cells'
> + - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/starfive,jh7110-crg.h>
> + #include <dt-bindings/power/starfive,jh7110-pmu.h>
> + #include <dt-bindings/reset/starfive,jh7110-crg.h>
> +
> + ispcrg: clock-controller@19810000 {
> + compatible = "starfive,jh7110-ispcrg";
> + reg = <0x19810000 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>,
> + <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>,
> + <&syscrg JH7110_SYSCLK_NOC_BUS_ISP_AXI>,
> + <&dvp_clk>;
> + clock-names = "isp_top_core", "isp_top_axi",
> + "noc_bus_isp_axi", "dvp_clk";
> + resets = <&syscrg JH7110_SYSRST_ISP_TOP>,
> + <&syscrg JH7110_SYSRST_ISP_TOP_AXI>,
> + <&syscrg JH7110_SYSRST_NOC_BUS_ISP_AXI>;
> + reset-names = "isp_top_core",
> + "isp_top_axi",
> + "noc_bus_isp_axi";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + power-domains = <&pwrc JH7110_PD_ISP>;
> + };
> diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
> index 5ac8a4d90a7a..91ee589809c3 100644
> --- a/include/dt-bindings/clock/starfive,jh7110-crg.h
> +++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
> @@ -256,4 +256,22 @@
>
> #define JH7110_STGCLK_END 29
>
> +/* ISPCRG clocks */
> +#define JH7110_ISPCLK_DOM4_APB_FUNC 0
> +#define JH7110_ISPCLK_MIPI_RX0_PXL 1
> +#define JH7110_ISPCLK_DVP_INV 2
> +#define JH7110_ISPCLK_M31DPHY_CFGCLK_IN 3
> +#define JH7110_ISPCLK_M31DPHY_REFCLK_IN 4
> +#define JH7110_ISPCLK_M31DPHY_TXCLKESC_LAN0 5
> +#define JH7110_ISPCLK_VIN_PCLK 6
> +#define JH7110_ISPCLK_VIN_SYS_CLK 7
> +#define JH7110_ISPCLK_VIN_PIXEL_CLK_IF0 8
> +#define JH7110_ISPCLK_VIN_PIXEL_CLK_IF1 9
> +#define JH7110_ISPCLK_VIN_PIXEL_CLK_IF2 10
> +#define JH7110_ISPCLK_VIN_PIXEL_CLK_IF3 11
> +#define JH7110_ISPCLK_VIN_CLK_P_AXIWR 12
> +#define JH7110_ISPCLK_ISPV2_TOP_WRAPPER_CLK_C 13
> +
> +#define JH7110_ISPCLK_END 14
> +
> #endif /* __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__ */
> diff --git a/include/dt-bindings/reset/starfive,jh7110-crg.h b/include/dt-bindings/reset/starfive,jh7110-crg.h
> index cb70a1759482..1b40df62cdac 100644
> --- a/include/dt-bindings/reset/starfive,jh7110-crg.h
> +++ b/include/dt-bindings/reset/starfive,jh7110-crg.h
> @@ -179,4 +179,20 @@
>
> #define JH7110_STGRST_END 23
>
> +/* ISPCRG resets */
> +#define JH7110_ISPRST_ISPV2_TOP_WRAPPER_P 0
Drop weird indentation.
Best regards,
Krzysztof
next prev parent reply other threads:[~2023-01-20 8:12 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-20 2:44 [PATCH v1 00/11] Add new partial clock and reset drivers for StarFive JH7110 Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 01/11] dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator Xingyu Wu
2023-01-20 8:11 ` Krzysztof Kozlowski
2023-01-30 6:17 ` Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 02/11] reset: starfive: jh7110: Add StarFive System-Top-Group reset support Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 03/11] clk: starfive: Add StarFive JH7110 System-Top-Group clock driver Xingyu Wu
2023-01-26 2:33 ` Stephen Boyd
2023-01-30 8:02 ` Xingyu Wu
2023-01-31 0:35 ` Stephen Boyd
2023-01-31 6:51 ` Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 04/11] dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator Xingyu Wu
2023-01-20 8:12 ` Krzysztof Kozlowski [this message]
2023-01-30 8:03 ` Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 05/11] reset: starfive: jh7110: Add StarFive Image-Signal-Process reset support Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 06/11] clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver Xingyu Wu
2023-01-26 2:35 ` Stephen Boyd
2023-01-30 8:09 ` Xingyu Wu
2023-01-31 0:38 ` Stephen Boyd
2023-01-31 6:52 ` Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 07/11] dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator Xingyu Wu
2023-01-20 8:13 ` Krzysztof Kozlowski
2023-01-30 8:10 ` Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 08/11] reset: starfive: jh7110: Add StarFive Video-Output reset support Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 09/11] clk: starfive: Add StarFive JH7110 Video-Output clock driver Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 10/11] riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks Xingyu Wu
2023-01-20 2:44 ` [PATCH v1 11/11] riscv: dts: starfive: jh7110: Add STGCRG/ISPCRG/VOUTCRG nodes Xingyu Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f85f5283-98b2-46b1-5a91-64ae708a6353@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hal.feng@starfivetech.com \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=xingyu.wu@starfivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).