[PATCH 5.4 000/203] 5.4.13-stable review

[PATCH 5.4 000/203] 5.4.13-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.13 release.
There are 203 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.13-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.13-rc1

Kai Li <li.kai4@h3c.com>
    ocfs2: call journal flush to mark journal as empty after journal recovery when mount

Nick Desaulniers <ndesaulniers@google.com>
    hexagon: work around compiler crash

Nick Desaulniers <ndesaulniers@google.com>
    hexagon: parenthesize registers in asm predicates

Ard Biesheuvel <ardb@kernel.org>
    kbuild/deb-pkg: annotate libelf-dev dependency as :native

Sakari Ailus <sakari.ailus@linux.intel.com>
    media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes

changzhu <Changfeng.Zhu@amd.com>
    drm/amdgpu: enable gfxoff for raven1 refresh

Alexander.Barabash@dell.com <Alexander.Barabash@dell.com>
    ioat: ioat_alloc_ring() failure handling.

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: lock the card while changing its hsuid

John Stultz <john.stultz@linaro.org>
    dmaengine: k3dma: Avoid null pointer traversal

David Howells <dhowells@redhat.com>
    rxrpc: Fix missing security check on incoming calls

David Howells <dhowells@redhat.com>
    rxrpc: Don't take call->user_mutex in rxrpc_new_incoming_call()

David Howells <dhowells@redhat.com>
    rxrpc: Unlock new call in rxrpc_new_incoming_call() rather than the caller

Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
    drm/arm/mali: make malidp_mw_connector_helper_funcs static

Jouni Hogander <jouni.hogander@unikie.com>
    MIPS: Prevent link failure with kcov instrumentation

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    tomoyo: Suppress RCU warning at list_for_each_entry_rcu().

Vincenzo Frascino <vincenzo.frascino@arm.com>
    mips: Fix gettimeofday() in the vdso library

Vladimir Kondratiev <vladimir.kondratiev@intel.com>
    mips: cacheinfo: report shared CPU map

Olof Johansson <olof@lixom.net>
    riscv: export flush_icache_all to modules

Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
    rseq/selftests: Turn off timeout setting

Shuah Khan <skhan@linuxfoundation.org>
    selftests: firmware: Fix it to do root uid check and skip

Israel Rukshin <israelr@mellanox.com>
    scsi: target/iblock: Fix protection error with blocks greater than 512B

Varun Prakash <varun@chelsio.com>
    scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy()

Johnson CH Chen (陳昭勳) <JohnsonCH.Chen@moxa.com>
    gpio: mpc8xxx: Add platform device to gpiochip->parent

Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
    rtc: bd70528: Add MODULE ALIAS to autoload module

Chuhong Yuan <hslester96@gmail.com>
    rtc: brcmstb-waketimer: add missed clk_disable_unprepare

Kars de Jong <jongk@linux-m68k.org>
    rtc: msm6242: Fix reading of 10-hour digit

Olga Kornievskaia <olga.kornievskaia@gmail.com>
    NFSD fixing possible null pointer derefering in copy offload

Chao Yu <chao@kernel.org>
    f2fs: fix potential overflow

Victorien Molle <victorien.molle@wifirst.fr>
    sch_cake: Add missing NLA policy entry TCA_CAKE_SPLIT_GSO

Luca Coelho <luciano.coelho@intel.com>
    iwlwifi: mvm: fix support for single antenna diversity

Nathan Chancellor <natechancellor@gmail.com>
    rtlwifi: Remove unnecessary NULL check in rtl_regd_init

Mordechay Goodstein <mordechay.goodstein@intel.com>
    iwlwifi: mvm: consider ieee80211 station max amsdu value

Navid Emamdoost <navid.emamdoost@gmail.com>
    spi: lpspi: fix memory leak in fsl_lpspi_probe

Geert Uytterhoeven <geert+renesas@glider.be>
    spi: rspi: Use platform_get_irq_byname_optional() for optional irqs

Mans Rullgard <mans@mansr.com>
    spi: atmel: fix handling of cs_change set on non-last xfer

Daniel Vetter <daniel.vetter@ffwll.ch>
    spi: pxa2xx: Set controller->max_transfer_size in dma mode

Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
    mtd: spi-nor: fix silent truncation in spi_nor_read_raw()

Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
    mtd: spi-nor: fix silent truncation in spi_nor_read()

Huanpeng Xin <huanpeng.xin@unisoc.com>
    spi: sprd: Fix the incorrect SPI register

Zhihao Cheng <chengzhihao1@huawei.com>
    ubifs: do_kill_orphans: Fix a memory leak bug

Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
    ubifs: Fixed missed le64_to_cpu() in journal

Richard Weinberger <richard@nod.at>
    Revert "ubifs: Fix memory leak bug in alloc_ubifs_info() error path"

Yong Wu <yong.wu@mediatek.com>
    memory: mtk-smi: Add PM suspend and resume ops

Yong Wu <yong.wu@mediatek.com>
    iommu/mediatek: Add a new tlb_lock for tlb_flush

Yong Wu <yong.wu@mediatek.com>
    iommu/mediatek: Correct the flush_iotlb_all callback

Jonas Karlman <jonas@kwiboo.se>
    media: hantro: Set H264 FIELDPIC_FLAG_E flag correctly

Navid Emamdoost <navid.emamdoost@gmail.com>
    media: aspeed-video: Fix memory leaks in aspeed_video_probe

Jonas Karlman <jonas@kwiboo.se>
    media: hantro: Do not reorder H264 scaling list

Jonas Karlman <jonas@kwiboo.se>
    media: cedrus: Use correct H264 8x8 scaling list

Philipp Zabel <p.zabel@pengutronix.de>
    media: coda: fix deadlock between decoder picture run and start command

Seung-Woo Kim <sw0312.kim@samsung.com>
    media: exynos4-is: Fix recursive locking in isp_video_release()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    media: v4l: cadence: Fix how unsued lanes are handled in 'csi2rx_start()'

Boris Brezillon <boris.brezillon@collabora.com>
    media: hantro: h264: Fix the frame_num wraparound case

Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
    media: rcar-vin: Fix incorrect return statement in rvin_try_format()

Janusz Krzysztofik <jmkrzyszt@gmail.com>
    media: ov6650: Fix default format not applied on device probe

Janusz Krzysztofik <jmkrzyszt@gmail.com>
    media: ov6650: Fix .get_fmt() V4L2_SUBDEV_FORMAT_TRY support

Janusz Krzysztofik <jmkrzyszt@gmail.com>
    media: ov6650: Fix some format attributes not under control

Janusz Krzysztofik <jmkrzyszt@gmail.com>
    media: ov6650: Fix incorrect use of JPEG colorspace

Dietmar Eggemann <dietmar.eggemann@arm.com>
    ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MC

Peng Fan <peng.fan@nxp.com>
    tty: serial: pch_uart: correct usage of dma_unmap_sg

Peng Fan <peng.fan@nxp.com>
    tty: serial: imx: use the sg count from dma_map_sg

Thomas Bogendoerfer <tbogendoerfer@suse.de>
    MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter

Tiezhu Yang <yangtiezhu@loongson.cn>
    MIPS: Loongson: Fix return value of loongson_hwmon_init

Thomas Bogendoerfer <tbogendoerfer@suse.de>
    MIPS: PCI: remember nasid changed by set interrupt affinity

Oliver O'Halloran <oohall@gmail.com>
    powerpc/powernv: Disable native PCIe port management

Bjorn Helgaas <bhelgaas@google.com>
    PCI/PTM: Remove spurious "d" from granularity message

Hewenliang <hewenliang4@huawei.com>
    tools: PCI: Fix fd leakage

Bjorn Helgaas <bhelgaas@google.com>
    PCI/PM: Clear PCIe PME Status even for legacy power management

Rob Herring <robh@kernel.org>
    PCI: Fix missing bridge dma_ranges resource list cleanup

Niklas Cassel <niklas.cassel@linaro.org>
    PCI: dwc: Fix find_next_bit() usage

Remi Pommarel <repk@triplefau.lt>
    PCI: aardvark: Fix PCI_EXP_RTCTL register configuration

Remi Pommarel <repk@triplefau.lt>
    PCI: aardvark: Use LTSSM state to build link training flag

Arnd Bergmann <arnd@arndb.de>
    compat_ioctl: handle SIOCOUTQNSD

Arnd Bergmann <arnd@arndb.de>
    af_unix: add compat_ioctl support

Arnd Bergmann <arnd@arndb.de>
    gfs2: add compat_ioctl support

Loic Poulain <loic.poulain@linaro.org>
    arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD

Arnd Bergmann <arnd@arndb.de>
    scsi: sd: enable compat ioctls for sed-opal

Xiaojie Yuan <xiaojie.yuan@amd.com>
    drm/amdgpu/discovery: reserve discovery data at the top of VRAM

Christian König <christian.koenig@amd.com>
    drm/amdgpu: cleanup creating BOs at fixed location (v2)

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "drm/virtio: switch virtio_gpu_wait_ioctl() to gem helper."

Mika Westerberg <mika.westerberg@linux.intel.com>
    PCI: pciehp: Do not disable interrupt twice on suspend

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    pinctrl: lewisburg: Update pin list according to v1.1v6

Geert Uytterhoeven <geert+renesas@glider.be>
    pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts

Keiya Nobuta <nobuta.keiya@fujitsu.com>
    pinctrl: sh-pfc: Fix PINMUX_IPSR_PHYS() to set GPSR

Colin Ian King <colin.king@canonical.com>
    pinctl: ti: iodelay: fix error checking on pinctrl_count_index_with_args call

Navid Emamdoost <navid.emamdoost@gmail.com>
    affs: fix a memory leak in affs_remount

Denis Efremov <efremov@linux.com>
    rsi: fix potential null dereference in rsi_probe()

Leonard Crestez <leonard.crestez@nxp.com>
    clk: imx: pll14xx: Fix quick switch of S/K parameter

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    dmaengine: dw: platform: Mark 'hclk' clock optional

Kishon Vijay Abraham I <kishon@ti.com>
    clk: Fix memory leak in clk_unregister()

Marian Mihailescu <mihailescu2m@gmail.com>
    clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume

Jerome Brunet <jbrunet@baylibre.com>
    clk: meson: axg-audio: fix regmap last register

Alexander Usyskin <alexander.usyskin@intel.com>
    mei: fix modalias documentation

Alexandru Ardelean <alexandru.ardelean@analog.com>
    iio: imu: adis16480: assign bias value only if operation succeeded

Lorenzo Bianconi <lorenzo@kernel.org>
    iio: imu: st_lsm6dsx: fix gyro gain definitions for LSM9DS1

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()

Scott Mayhew <smayhew@redhat.com>
    nfsd: v4 support requires CRYPTO_SHA256

Scott Mayhew <smayhew@redhat.com>
    nfsd: Fix cld_net->cn_tfm initialization

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv2: Fix a typo in encode_sattr()

Eric Biggers <ebiggers@google.com>
    crypto: geode-aes - convert to skcipher API and make thread-safe

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: algif_skcipher - Use chunksize instead of blocksize

Ard Biesheuvel <ardb@kernel.org>
    crypto: virtio - implement missing support for output IVs

Yunfeng Ye <yeyunfeng@huawei.com>
    crypto: arm64/aes-neonbs - add return value of skcipher_walk_done() in __xts_crypt()

Zhou Wang <wangzhou1@hisilicon.com>
    crypto: hisilicon - select NEED_SG_DMA_LENGTH in qm Kconfig

Phani Kiran Hemadri <phemadri@marvell.com>
    crypto: cavium/nitrox - fix firmware assignment to AE cores

Can Guo <cang@codeaurora.org>
    scsi: ufs: Give an unique ID to each ufs-bsg

Diego Calleja <diegocg@gmail.com>
    dm: add dm-clone to the documentation index

Chuck Lever <chuck.lever@oracle.com>
    xprtrdma: Fix oops in Receive handler after device removal

Chuck Lever <chuck.lever@oracle.com>
    xprtrdma: Fix completion wait during device removal

Chuck Lever <chuck.lever@oracle.com>
    xprtrdma: Fix create_qp crash on device unload

Vadim Pasternak <vadimp@mellanox.com>
    Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces

Vadim Pasternak <vadimp@mellanox.com>
    Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces

Mike Rapoport <rppt@linux.ibm.com>
    asm-generic/nds32: don't redefine cacheflush primitives

Hans de Goede <hdegoede@redhat.com>
    platform/x86: GPD pocket fan: Use default values when wrong modparams are given

Jian-Hong Pan <jian-hong@endlessm.com>
    platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0

Liming Sun <lsun@mellanox.com>
    platform/mellanox: fix potential deadlock in the tmfifo driver

Xiang Chen <chenxiang66@hisilicon.com>
    scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI

James Bottomley <James.Bottomley@HansenPartnership.com>
    scsi: enclosure: Fix stale device oops with hot replug

David Howells <dhowells@redhat.com>
    keys: Fix request_key() cache

David Howells <dhowells@redhat.com>
    afs: Fix afs_lookup() to not clobber the version on a new dentry

David Howells <dhowells@redhat.com>
    afs: Fix use-after-loss-of-ref

Andrii Nakryiko <andriin@fb.com>
    libbpf: Fix Makefile' libbpf symbol mismatch diagnostic

Stanislav Fomichev <sdf@google.com>
    bpf: Support pre-2.25-binutils objcopy for vmlinux BTF

John Fastabend <john.fastabend@gmail.com>
    bpf: skmsg, fix potential psock NULL pointer dereference

Daniel Borkmann <daniel@iogearbox.net>
    bpf: Make use of probe_user_write in probe write helper

Daniel Borkmann <daniel@iogearbox.net>
    uaccess: Add non-pagefault user-space write function

Bart Van Assche <bvanassche@acm.org>
    RDMA/srpt: Report the SCSI residual to the initiator

Leon Romanovsky <leon@kernel.org>
    RDMA/mlx5: Return proper error value

Jason Gunthorpe <jgg@ziepe.ca>
    rdma: Remove nes ABI header

Yangyang Li <liyangyang20@huawei.com>
    RDMA/hns: Bugfix for qpc/cqc timer configuration

Lijun Ou <oulijun@huawei.com>
    RDMA/hns: Fix to support 64K page for srq

Chuck Lever <chuck.lever@oracle.com>
    xprtrdma: Close window between waking RPC senders and posting Receives

Chuck Lever <chuck.lever@oracle.com>
    xprtrdma: Fix MR list handling

Chuck Lever <chuck.lever@oracle.com>
    xprtrdma: Connection becomes unstable after a reconnect

Chuck Lever <chuck.lever@oracle.com>
    xprtrdma: Add unique trace points for posting Local Invalidate WRs

Yangyang Li <liyangyang20@huawei.com>
    RDMA/hns: Release qp resources when failed to destroy qp

Arnd Bergmann <arnd@arndb.de>
    RDMA/hns: Fix build error again

Bart Van Assche <bvanassche@acm.org>
    RDMA/siw: Fix port number endianness in a debug message

Mark Zhang <markz@mellanox.com>
    RDMA/counter: Prevent QP counter manual binding in auto mode

Lang Cheng <chenglang@huawei.com>
    RDMA/hns: Modify return value of restrack functions

Weihang Li <liweihang@hisilicon.com>
    RDMA/hns: remove a redundant le16_to_cpu

Jason Gunthorpe <jgg@ziepe.ca>
    RDMA/hns: Prevent undefined behavior in hns_roce_set_user_sq_size()

Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>
    ASoC: rsnd: fix DALIGN register for SSIU

Takashi Iwai <tiwai@suse.de>
    ASoC: core: Fix compile warning with CONFIG_DEBUG_FS=n

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ASoC: SOF: Intel: Broadwell: clarify mutual exclusion with legacy driver

Shengjiu Wang <shengjiu.wang@nxp.com>
    ASoC: fsl_esai: Add spin lock to protect reset, stop and start

Daniel Baluta <daniel.baluta@nxp.com>
    ASoC: simple_card_utils.h: Add missing include

Tzung-Bi Shih <tzungbi@google.com>
    ASoC: dt-bindings: mt8183: add missing update

Arnd Bergmann <arnd@arndb.de>
    netfilter: nft_meta: use 64-bit time arithmetic

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables_offload: release flow_rule on error from commit path

Goldwyn Rodrigues <rgoldwyn@suse.com>
    btrfs: simplify inode locking for RWF_NOWAIT

Taehee Yoo <ap420073@gmail.com>
    hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename()

Sami Tolvanen <samitolvanen@google.com>
    syscalls/x86: Fix function types in COND_SYSCALL

Sami Tolvanen <samitolvanen@google.com>
    syscalls/x86: Use the correct function type for sys_ni_syscall

Sami Tolvanen <samitolvanen@google.com>
    syscalls/x86: Use COMPAT_SYSCALL_DEFINE0 for IA32 (rt_)sigreturn

Andy Lutomirski <luto@kernel.org>
    syscalls/x86: Wire up COMPAT_SYSCALL_DEFINE0

Ed Maste <emaste@freebsd.org>
    perf vendor events s390: Remove name from L1D_RO_EXCL_WRITES description

David Howells <dhowells@redhat.com>
    afs: Fix missing cell comparison in afs_test_super()

Florian Fainelli <f.fainelli@gmail.com>
    reset: brcmstb: Remove resource checks

Florian Fainelli <f.fainelli@gmail.com>
    dt-bindings: reset: Fix brcmstb-reset example

Marc Kleine-Budde <mkl@pengutronix.de>
    can: j1939: fix address claim code example

Christian Lamparter <chunkeey@gmail.com>
    ath9k: use iowrite32 over __raw_writel

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    MAINTAINERS: Append missed file to the database

Paul Menzel <pmenzel@molgen.mpg.de>
    scsi: smartpqi: Update attribute name to `driver_version`

Nathan Chancellor <natechancellor@gmail.com>
    cifs: Adjust indentation in smb2_open_file

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: fix initialization on old HW

Alexandra Winter <wintera@linux.ibm.com>
    s390/qeth: vnicc Fix init to default

Alexandra Winter <wintera@linux.ibm.com>
    s390/qeth: Fix vnicc_is_in_use if rx_bcast not set

Alexandra Winter <wintera@linux.ibm.com>
    s390/qeth: fix false reporting of VNIC CHAR config failure

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: fix qdio teardown after early init error

Taehee Yoo <ap420073@gmail.com>
    hsr: reset network header when supervision frame is created

Taehee Yoo <ap420073@gmail.com>
    hsr: rename debugfs file when interface name is changed

Taehee Yoo <ap420073@gmail.com>
    hsr: add hsr root debugfs directory

Thierry Reding <treding@nvidia.com>
    drm/tegra: Fix ordering of cleanup code

Neil Armstrong <narmstrong@baylibre.com>
    PCI: amlogic: Fix probed clock names

Arnd Bergmann <arnd@arndb.de>
    PM / devfreq: tegra: Add COMMON_CLK dependency

Geert Uytterhoeven <geert+renesas@glider.be>
    gpio: Fix error message on out-of-range GPIO in lookup table

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: mpt3sas: Fix double free in attach error handling

Ming Lei <ming.lei@redhat.com>
    fs: move guard_bio_eod() after bio_set_op_attrs

Roman Gushchin <guro@fb.com>
    bpf: cgroup: prevent out-of-order release of cgroup bpf

Jon Derrick <jonathan.derrick@intel.com>
    iommu: Remove device link to group on failure

Jon Derrick <jonathan.derrick@intel.com>
    iommu/vt-d: Unlink device if failed to add to group

Hangbin Liu <liuhangbin@gmail.com>
    selftests: loopback.sh: skip this test if the driver does not support

Qianggui Song <qianggui.song@amlogic.com>
    pinctrl: meson: Fix wrong shift value when get drive-strength

Swapna Manupati <swapna.manupati@xilinx.com>
    gpio: zynq: Fix for bug in zynq_gpio_restore_context API

Peter Ujfalusi <peter.ujfalusi@ti.com>
    mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy

Daniel Baluta <daniel.baluta@nxp.com>
    ASoC: SOF: imx8: Fix dsp_box offset

wenxu <wenxu@ucloud.cn>
    netfilter: nft_flow_offload: fix underflow in flowtable reference counter

Arnd Bergmann <arnd@arndb.de>
    pinctrl: lochnagar: select GPIOLIB

Olivier Moysan <olivier.moysan@st.com>
    ASoC: stm32: spdifrx: fix input pin state management

Olivier Moysan <olivier.moysan@st.com>
    ASoC: stm32: spdifrx: fix race condition in irq handler

Olivier Moysan <olivier.moysan@st.com>
    ASoC: stm32: spdifrx: fix inconsistent lock state

Daniel Baluta <daniel.baluta@nxp.com>
    ASoC: soc-core: Set dpcm_playback / dpcm_capture

Colin Ian King <colin.king@canonical.com>
    ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev

Stefan Wahren <wahrenst@gmx.net>
    i2c: bcm2835: Store pointer to bus clock

Christophe Kerello <christophe.kerello@st.com>
    mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus

Kaike Wan <kaike.wan@intel.com>
    IB/hfi1: Don't cancel unused work item

Selvin Xavier <selvin.xavier@broadcom.com>
    RDMA/bnxt_re: Fix Send Work Entry state check while polling completions

Selvin Xavier <selvin.xavier@broadcom.com>
    RDMA/bnxt_re: Avoid freeing MR resources if dereg fails

Tony Lindgren <tony@atomide.com>
    phy: mapphone-mdm6600: Fix uninitialized status value regression

Ran Bi <ran.bi@mediatek.com>
    rtc: mt6397: fix alarm register overwrite

Jiri Kosina <jkosina@suse.cz>
    HID: hidraw, uhid: Always report EPOLLOUT


-------------

Diffstat:

 Documentation/ABI/stable/sysfs-driver-mlxreg-io    |  13 +-
 Documentation/ABI/testing/sysfs-bus-mei            |   2 +-
 Documentation/admin-guide/device-mapper/index.rst  |   1 +
 .../bindings/reset/brcm,brcmstb-reset.txt          |   2 +-
 .../sound/mt8183-mt6358-ts3a227-max98357.txt       |   4 +-
 Documentation/networking/j1939.rst                 |   2 +-
 Documentation/scsi/smartpqi.txt                    |   2 +-
 MAINTAINERS                                        |   1 +
 Makefile                                           |   4 +-
 arch/arm/kernel/smp.c                              |   4 +
 arch/arm/kernel/topology.c                         |  10 +-
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi       |   2 +
 arch/arm64/crypto/aes-neonbs-glue.c                |   2 +-
 arch/hexagon/include/asm/atomic.h                  |   8 +-
 arch/hexagon/include/asm/bitops.h                  |   8 +-
 arch/hexagon/include/asm/cmpxchg.h                 |   2 +-
 arch/hexagon/include/asm/futex.h                   |   6 +-
 arch/hexagon/include/asm/spinlock.h                |  20 +-
 arch/hexagon/kernel/stacktrace.c                   |   4 +-
 arch/hexagon/kernel/vm_entry.S                     |   2 +-
 arch/mips/boot/compressed/Makefile                 |   3 +
 arch/mips/include/asm/vdso/gettimeofday.h          |  13 -
 arch/mips/kernel/cacheinfo.c                       |  27 +-
 arch/mips/pci/pci-xtalk-bridge.c                   |   5 +-
 arch/mips/sgi-ip27/ip27-irq.c                      |   4 +
 arch/mips/vdso/vgettimeofday.c                     |  20 +
 arch/nds32/include/asm/cacheflush.h                |  11 +-
 arch/powerpc/platforms/powernv/pci.c               |  17 +
 arch/riscv/mm/cacheflush.c                         |   1 +
 arch/x86/entry/syscall_32.c                        |   8 +-
 arch/x86/entry/syscall_64.c                        |  14 +-
 arch/x86/entry/syscalls/syscall_32.tbl             |   8 +-
 arch/x86/ia32/ia32_signal.c                        |   5 +-
 arch/x86/include/asm/syscall_wrapper.h             |  53 ++-
 block/bio.c                                        |  12 +-
 crypto/algif_skcipher.c                            |   2 +-
 drivers/clk/clk.c                                  |   1 +
 drivers/clk/imx/clk-pll14xx.c                      |  40 +-
 drivers/clk/meson/axg-audio.c                      |   2 +-
 drivers/clk/samsung/clk-exynos5420.c               |   2 +
 drivers/crypto/cavium/nitrox/nitrox_main.c         |   9 +-
 drivers/crypto/geode-aes.c                         | 440 +++++++--------------
 drivers/crypto/geode-aes.h                         |  15 +-
 drivers/crypto/hisilicon/Kconfig                   |   1 +
 drivers/crypto/virtio/virtio_crypto_algs.c         |   9 +
 drivers/devfreq/Kconfig                            |   1 +
 drivers/dma/dw/platform.c                          |   2 +-
 drivers/dma/ioat/dma.c                             |   3 +-
 drivers/dma/k3dma.c                                |  12 +-
 drivers/gpio/gpio-mpc8xxx.c                        |   1 +
 drivers/gpio/gpio-zynq.c                           |   8 +-
 drivers/gpio/gpiolib.c                             |   5 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu.h                |   1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c      |   4 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.h      |   2 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_object.c         |  61 +++
 drivers/gpu/drm/amd/amdgpu/amdgpu_object.h         |   3 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c            |  85 +---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c            |  99 ++---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c              |  15 +-
 drivers/gpu/drm/amd/include/discovery.h            |   1 -
 drivers/gpu/drm/arm/malidp_mw.c                    |   2 +-
 drivers/gpu/drm/tegra/drm.c                        |  14 +-
 drivers/gpu/drm/virtio/virtgpu_ioctl.c             |  28 +-
 drivers/hid/hidraw.c                               |   7 +-
 drivers/hid/uhid.c                                 |   5 +-
 drivers/i2c/busses/i2c-bcm2835.c                   |  17 +-
 drivers/iio/imu/adis16480.c                        |   6 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c       |   7 +-
 drivers/infiniband/core/counters.c                 |  12 +-
 drivers/infiniband/hw/bnxt_re/ib_verbs.c           |   4 +-
 drivers/infiniband/hw/bnxt_re/qplib_fp.c           |  12 +-
 drivers/infiniband/hw/hfi1/iowait.c                |   4 +-
 drivers/infiniband/hw/hns/Kconfig                  |  17 +-
 drivers/infiniband/hw/hns/Makefile                 |   8 +-
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c         |  18 +-
 drivers/infiniband/hw/hns/hns_roce_hw_v2.h         |   4 +-
 drivers/infiniband/hw/hns/hns_roce_qp.c            |  10 +-
 drivers/infiniband/hw/hns/hns_roce_restrack.c      |   2 +-
 drivers/infiniband/hw/mlx5/mr.c                    |   2 +-
 drivers/infiniband/sw/siw/siw_cm.c                 |   9 +-
 drivers/infiniband/ulp/srpt/ib_srpt.c              |  24 ++
 drivers/iommu/intel-iommu.c                        |  13 +-
 drivers/iommu/iommu.c                              |   1 +
 drivers/iommu/mtk_iommu.c                          |  25 +-
 drivers/iommu/mtk_iommu.h                          |   1 +
 drivers/media/i2c/ov6650.c                         |  79 ++--
 drivers/media/platform/aspeed-video.c              |   3 +-
 drivers/media/platform/cadence/cdns-csi2rx.c       |   2 +-
 drivers/media/platform/coda/coda-common.c          |   4 +-
 drivers/media/platform/exynos4-is/fimc-isp-video.c |   2 +-
 drivers/media/platform/rcar-vin/rcar-v4l2.c        |   3 +-
 drivers/memory/mtk-smi.c                           |   4 +
 drivers/misc/enclosure.c                           |   3 +-
 drivers/mtd/nand/onenand/omap2.c                   |   3 +-
 drivers/mtd/nand/raw/stm32_fmc2_nand.c             |  38 +-
 drivers/mtd/spi-nor/spi-nor.c                      |   4 +-
 .../net/wireless/ath/ath9k/ath9k_pci_owl_loader.c  |   2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c        |  20 +-
 drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c     |   8 +-
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c        |   7 +-
 drivers/net/wireless/realtek/rtlwifi/regd.c        |   2 +-
 drivers/net/wireless/rsi/rsi_91x_usb.c             |   2 +-
 drivers/pci/controller/dwc/pci-meson.c             |   6 +-
 drivers/pci/controller/dwc/pcie-designware-host.c  |  11 +-
 drivers/pci/controller/pci-aardvark.c              |  42 +-
 drivers/pci/hotplug/pciehp_core.c                  |  25 +-
 drivers/pci/pci-driver.c                           |   3 +-
 drivers/pci/pcie/ptm.c                             |   2 +-
 drivers/pci/probe.c                                |   1 +
 drivers/phy/motorola/phy-mapphone-mdm6600.c        |  11 +-
 drivers/pinctrl/cirrus/Kconfig                     |   1 +
 drivers/pinctrl/intel/pinctrl-lewisburg.c          | 171 ++++----
 drivers/pinctrl/meson/pinctrl-meson.c              |   1 +
 drivers/pinctrl/sh-pfc/core.c                      |  16 +-
 drivers/pinctrl/sh-pfc/sh_pfc.h                    |   4 +-
 drivers/pinctrl/ti/pinctrl-ti-iodelay.c            |   2 +-
 drivers/platform/mellanox/mlxbf-tmfifo.c           |  19 +-
 drivers/platform/mips/cpu_hwmon.c                  |   2 +-
 drivers/platform/x86/asus-wmi.c                    |   8 +-
 drivers/platform/x86/gpd-pocket-fan.c              |  25 +-
 drivers/reset/reset-brcmstb.c                      |   6 -
 drivers/rtc/rtc-bd70528.c                          |   1 +
 drivers/rtc/rtc-brcmstb-waketimer.c                |   1 +
 drivers/rtc/rtc-msm6242.c                          |   3 +-
 drivers/rtc/rtc-mt6397.c                           |  47 ++-
 drivers/s390/net/qeth_core_main.c                  |  29 +-
 drivers/s390/net/qeth_l2_main.c                    |  10 +-
 drivers/s390/net/qeth_l3_main.c                    |   2 +-
 drivers/s390/net/qeth_l3_sys.c                     |  40 +-
 drivers/scsi/cxgbi/libcxgbi.c                      |   3 +-
 drivers/scsi/mpt3sas/mpt3sas_base.c                |   1 -
 drivers/scsi/sd.c                                  |  18 +-
 drivers/scsi/ufs/ufs_bsg.c                         |   2 +-
 drivers/spi/spi-atmel.c                            |  10 +-
 drivers/spi/spi-fsl-lpspi.c                        |   2 +-
 drivers/spi/spi-pxa2xx.c                           |   7 +
 drivers/spi/spi-rspi.c                             |   8 +-
 drivers/spi/spi-sprd.c                             |   2 +-
 drivers/staging/media/hantro/hantro_g1_h264_dec.c  |   2 +-
 drivers/staging/media/hantro/hantro_h264.c         |  73 ++--
 drivers/staging/media/ipu3/include/intel-ipu3.h    |   2 +-
 drivers/staging/media/sunxi/cedrus/cedrus_h264.c   |   4 +-
 drivers/target/target_core_iblock.c                |   4 +-
 drivers/tty/serial/imx.c                           |   2 +-
 drivers/tty/serial/pch_uart.c                      |   5 +-
 fs/affs/super.c                                    |   6 -
 fs/afs/dir.c                                       |  18 +-
 fs/afs/super.c                                     |   1 +
 fs/btrfs/file.c                                    |   5 +-
 fs/buffer.c                                        |   8 +-
 fs/cifs/smb2file.c                                 |   2 +-
 fs/f2fs/data.c                                     |   2 +-
 fs/f2fs/file.c                                     |   2 +-
 fs/gfs2/file.c                                     |  30 ++
 fs/internal.h                                      |   2 +-
 fs/mpage.c                                         |   2 +-
 fs/nfs/nfs2xdr.c                                   |   2 +-
 fs/nfs/nfs4proc.c                                  |  38 +-
 fs/nfsd/Kconfig                                    |   2 +-
 fs/nfsd/nfs4proc.c                                 |   3 +-
 fs/nfsd/nfs4recover.c                              |  12 +-
 fs/ocfs2/journal.c                                 |   8 +
 fs/ubifs/journal.c                                 |   2 +-
 fs/ubifs/orphan.c                                  |  17 +-
 fs/ubifs/super.c                                   |   4 +-
 include/asm-generic/cacheflush.h                   |  33 +-
 include/crypto/internal/skcipher.h                 |  30 --
 include/crypto/skcipher.h                          |  30 ++
 include/linux/uaccess.h                            |  12 +
 include/sound/simple_card_utils.h                  |   1 +
 include/trace/events/afs.h                         |  12 +-
 include/trace/events/rpcrdma.h                     |  25 ++
 include/uapi/rdma/nes-abi.h                        | 115 ------
 kernel/bpf/cgroup.c                                |  11 +-
 kernel/cred.c                                      |   4 +-
 kernel/trace/bpf_trace.c                           |   6 +-
 mm/maccess.c                                       |  45 ++-
 net/core/skmsg.c                                   |  13 +-
 net/hsr/hsr_debugfs.c                              |  36 +-
 net/hsr/hsr_device.c                               |   2 +
 net/hsr/hsr_main.c                                 |   5 +
 net/hsr/hsr_main.h                                 |  10 +
 net/hsr/hsr_netlink.c                              |   1 +
 net/netfilter/nf_tables_offload.c                  |  26 +-
 net/netfilter/nft_flow_offload.c                   |   3 -
 net/netfilter/nft_meta.c                           |  10 +-
 net/rxrpc/ar-internal.h                            |  10 +-
 net/rxrpc/call_accept.c                            |  60 +--
 net/rxrpc/conn_event.c                             |  16 +-
 net/rxrpc/conn_service.c                           |   4 +
 net/rxrpc/input.c                                  |  18 -
 net/rxrpc/rxkad.c                                  |   5 +-
 net/rxrpc/security.c                               |  70 ++--
 net/sched/sch_cake.c                               |   1 +
 net/socket.c                                       |   1 +
 net/sunrpc/xprtrdma/frwr_ops.c                     |   4 +-
 net/sunrpc/xprtrdma/rpc_rdma.c                     |   1 +
 net/sunrpc/xprtrdma/transport.c                    |   3 +
 net/sunrpc/xprtrdma/verbs.c                        | 103 +++--
 net/sunrpc/xprtrdma/xprt_rdma.h                    |   3 +
 net/unix/af_unix.c                                 |  19 +
 scripts/link-vmlinux.sh                            |   7 +-
 scripts/package/mkdebian                           |   2 +-
 security/tomoyo/common.c                           |   9 +-
 security/tomoyo/domain.c                           |  15 +-
 security/tomoyo/group.c                            |   9 +-
 security/tomoyo/util.c                             |   6 +-
 sound/soc/fsl/fsl_esai.c                           |  12 +
 sound/soc/intel/Kconfig                            |   3 +
 sound/soc/sh/rcar/core.c                           |  20 +-
 sound/soc/soc-core.c                               |   2 +
 sound/soc/soc-pcm.c                                |   2 +
 sound/soc/sof/imx/imx8.c                           |   5 +-
 sound/soc/sof/intel/Kconfig                        |  10 +-
 sound/soc/stm/stm32_spdifrx.c                      |  40 +-
 tools/lib/bpf/Makefile                             |   2 +-
 tools/pci/pcitest.c                                |   1 +
 .../perf/pmu-events/arch/s390/cf_z14/extended.json |   2 +-
 tools/testing/selftests/firmware/fw_lib.sh         |   6 +
 tools/testing/selftests/net/forwarding/loopback.sh |   8 +
 tools/testing/selftests/rseq/settings              |   1 +
 222 files changed, 1849 insertions(+), 1423 deletions(-)

[PATCH 5.4 001/203] HID: hidraw, uhid: Always report EPOLLOUT

[Greg Kroah-Hartman]

From: Jiri Kosina <jkosina@suse.cz>

[ Upstream commit 9e635c2851df6caee651e589fbf937b637973c91 ]

hidraw and uhid device nodes are always available for writing so we should
always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when
there is nothing to read.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll")
Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hidraw.c |    7 ++++---
 drivers/hid/uhid.c   |    5 +++--
 2 files changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -249,13 +249,14 @@ out:
 static __poll_t hidraw_poll(struct file *file, poll_table *wait)
 {
 	struct hidraw_list *list = file->private_data;
+	__poll_t mask = EPOLLOUT | EPOLLWRNORM; /* hidraw is always writable */
 
 	poll_wait(file, &list->hidraw->wait, wait);
 	if (list->head != list->tail)
-		return EPOLLIN | EPOLLRDNORM;
+		mask |= EPOLLIN | EPOLLRDNORM;
 	if (!list->hidraw->exist)
-		return EPOLLERR | EPOLLHUP;
-	return EPOLLOUT | EPOLLWRNORM;
+		mask |= EPOLLERR | EPOLLHUP;
+	return mask;
 }
 
 static int hidraw_open(struct inode *inode, struct file *file)
--- a/drivers/hid/uhid.c
+++ b/drivers/hid/uhid.c
@@ -766,13 +766,14 @@ unlock:
 static __poll_t uhid_char_poll(struct file *file, poll_table *wait)
 {
 	struct uhid_device *uhid = file->private_data;
+	__poll_t mask = EPOLLOUT | EPOLLWRNORM; /* uhid is always writable */
 
 	poll_wait(file, &uhid->waitq, wait);
 
 	if (uhid->head != uhid->tail)
-		return EPOLLIN | EPOLLRDNORM;
+		mask |= EPOLLIN | EPOLLRDNORM;
 
-	return EPOLLOUT | EPOLLWRNORM;
+	return mask;
 }
 
 static const struct file_operations uhid_fops = {

[PATCH 5.4 002/203] rtc: mt6397: fix alarm register overwrite

[Greg Kroah-Hartman]

From: Ran Bi <ran.bi@mediatek.com>

commit 653997eeecef95c3ead4fba1b2d27e6a5854d6cd upstream.

Alarm registers high byte was reserved for other functions.
This add mask in alarm registers operation functions.
This also fix error condition in interrupt handler.

Fixes: fc2979118f3f ("rtc: mediatek: Add MT6397 RTC driver")

Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Link: https://lore.kernel.org/r/1576057435-3561-6-git-send-email-hsin-hsiung.wang@mediatek.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-mt6397.c |   47 +++++++++++++++++++++++++++++++++--------------
 1 file changed, 33 insertions(+), 14 deletions(-)

--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -47,6 +47,14 @@
 
 #define RTC_AL_SEC		0x0018
 
+#define RTC_AL_SEC_MASK		0x003f
+#define RTC_AL_MIN_MASK		0x003f
+#define RTC_AL_HOU_MASK		0x001f
+#define RTC_AL_DOM_MASK		0x001f
+#define RTC_AL_DOW_MASK		0x0007
+#define RTC_AL_MTH_MASK		0x000f
+#define RTC_AL_YEA_MASK		0x007f
+
 #define RTC_PDN2		0x002e
 #define RTC_PDN2_PWRON_ALARM	BIT(4)
 
@@ -103,7 +111,7 @@ static irqreturn_t mtk_rtc_irq_handler_t
 		irqen = irqsta & ~RTC_IRQ_EN_AL;
 		mutex_lock(&rtc->lock);
 		if (regmap_write(rtc->regmap, rtc->addr_base + RTC_IRQ_EN,
-				 irqen) < 0)
+				 irqen) == 0)
 			mtk_rtc_write_trigger(rtc);
 		mutex_unlock(&rtc->lock);
 
@@ -225,12 +233,12 @@ static int mtk_rtc_read_alarm(struct dev
 	alm->pending = !!(pdn2 & RTC_PDN2_PWRON_ALARM);
 	mutex_unlock(&rtc->lock);
 
-	tm->tm_sec = data[RTC_OFFSET_SEC];
-	tm->tm_min = data[RTC_OFFSET_MIN];
-	tm->tm_hour = data[RTC_OFFSET_HOUR];
-	tm->tm_mday = data[RTC_OFFSET_DOM];
-	tm->tm_mon = data[RTC_OFFSET_MTH];
-	tm->tm_year = data[RTC_OFFSET_YEAR];
+	tm->tm_sec = data[RTC_OFFSET_SEC] & RTC_AL_SEC_MASK;
+	tm->tm_min = data[RTC_OFFSET_MIN] & RTC_AL_MIN_MASK;
+	tm->tm_hour = data[RTC_OFFSET_HOUR] & RTC_AL_HOU_MASK;
+	tm->tm_mday = data[RTC_OFFSET_DOM] & RTC_AL_DOM_MASK;
+	tm->tm_mon = data[RTC_OFFSET_MTH] & RTC_AL_MTH_MASK;
+	tm->tm_year = data[RTC_OFFSET_YEAR] & RTC_AL_YEA_MASK;
 
 	tm->tm_year += RTC_MIN_YEAR_OFFSET;
 	tm->tm_mon--;
@@ -251,14 +259,25 @@ static int mtk_rtc_set_alarm(struct devi
 	tm->tm_year -= RTC_MIN_YEAR_OFFSET;
 	tm->tm_mon++;
 
-	data[RTC_OFFSET_SEC] = tm->tm_sec;
-	data[RTC_OFFSET_MIN] = tm->tm_min;
-	data[RTC_OFFSET_HOUR] = tm->tm_hour;
-	data[RTC_OFFSET_DOM] = tm->tm_mday;
-	data[RTC_OFFSET_MTH] = tm->tm_mon;
-	data[RTC_OFFSET_YEAR] = tm->tm_year;
-
 	mutex_lock(&rtc->lock);
+	ret = regmap_bulk_read(rtc->regmap, rtc->addr_base + RTC_AL_SEC,
+			       data, RTC_OFFSET_COUNT);
+	if (ret < 0)
+		goto exit;
+
+	data[RTC_OFFSET_SEC] = ((data[RTC_OFFSET_SEC] & ~(RTC_AL_SEC_MASK)) |
+				(tm->tm_sec & RTC_AL_SEC_MASK));
+	data[RTC_OFFSET_MIN] = ((data[RTC_OFFSET_MIN] & ~(RTC_AL_MIN_MASK)) |
+				(tm->tm_min & RTC_AL_MIN_MASK));
+	data[RTC_OFFSET_HOUR] = ((data[RTC_OFFSET_HOUR] & ~(RTC_AL_HOU_MASK)) |
+				(tm->tm_hour & RTC_AL_HOU_MASK));
+	data[RTC_OFFSET_DOM] = ((data[RTC_OFFSET_DOM] & ~(RTC_AL_DOM_MASK)) |
+				(tm->tm_mday & RTC_AL_DOM_MASK));
+	data[RTC_OFFSET_MTH] = ((data[RTC_OFFSET_MTH] & ~(RTC_AL_MTH_MASK)) |
+				(tm->tm_mon & RTC_AL_MTH_MASK));
+	data[RTC_OFFSET_YEAR] = ((data[RTC_OFFSET_YEAR] & ~(RTC_AL_YEA_MASK)) |
+				(tm->tm_year & RTC_AL_YEA_MASK));
+
 	if (alm->enabled) {
 		ret = regmap_bulk_write(rtc->regmap,
 					rtc->addr_base + RTC_AL_SEC,

[PATCH 5.4 003/203] phy: mapphone-mdm6600: Fix uninitialized status value regression

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

commit af5d44de571811a151510bfd1236407b7f551cd9 upstream.

Only the used bits get cleared with bitmap_zero() when we call
gpiod_get_array_value_cansleep(). We must mask only the bits we're
using for ddata->status as the other bits in the bitmap may not be
initialized.

And let's also drop useless debug code accidentally left over while
at it.

Fixes: b9762bebc633 ("gpiolib: Pass bitmaps, not integer arrays, to get/set array")
Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/phy/motorola/phy-mapphone-mdm6600.c |   11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -200,7 +200,7 @@ static void phy_mdm6600_status(struct wo
 	struct phy_mdm6600 *ddata;
 	struct device *dev;
 	DECLARE_BITMAP(values, PHY_MDM6600_NR_STATUS_LINES);
-	int error, i, val = 0;
+	int error;
 
 	ddata = container_of(work, struct phy_mdm6600, status_work.work);
 	dev = ddata->dev;
@@ -212,16 +212,11 @@ static void phy_mdm6600_status(struct wo
 	if (error)
 		return;
 
-	for (i = 0; i < PHY_MDM6600_NR_STATUS_LINES; i++) {
-		val |= test_bit(i, values) << i;
-		dev_dbg(ddata->dev, "XXX %s: i: %i values[i]: %i val: %i\n",
-			__func__, i, test_bit(i, values), val);
-	}
-	ddata->status = values[0];
+	ddata->status = values[0] & ((1 << PHY_MDM6600_NR_STATUS_LINES) - 1);
 
 	dev_info(dev, "modem status: %i %s\n",
 		 ddata->status,
-		 phy_mdm6600_status_name[ddata->status & 7]);
+		 phy_mdm6600_status_name[ddata->status]);
 	complete(&ddata->ack);
 }
 

[PATCH 5.4 004/203] RDMA/bnxt_re: Avoid freeing MR resources if dereg fails

[Greg Kroah-Hartman]

From: Selvin Xavier <selvin.xavier@broadcom.com>

commit 9a4467a6b282a299b932608ac2c9034f8415359f upstream.

The driver returns an error code for MR dereg, but frees the MR structure.
When the MR dereg is retried due to previous error, the system crashes as
the structure is already freed.

  BUG: unable to handle kernel NULL pointer dereference at 00000000000001b8
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 7 PID: 12178 Comm: ib_send_bw Kdump: loaded Not tainted 4.18.0-124.el8.x86_64 #1
  Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.1.10 03/10/2015
  RIP: 0010:__dev_printk+0x2a/0x70
  Code: 0f 1f 44 00 00 49 89 d1 48 85 f6 0f 84 f6 2b 00 00 4c 8b 46 70 4d 85 c0 75 04 4c 8b
46 10 48 8b 86 a8 00 00 00 48 85 c0 74 16 <48> 8b 08 0f be 7f 01 48 c7 c2 13 ac ac 83 83 ef 30 e9 10 fe ff ff
  RSP: 0018:ffffaf7c04607a60 EFLAGS: 00010006
  RAX: 00000000000001b8 RBX: ffffa0010c91c488 RCX: 0000000000000246
  RDX: ffffaf7c04607a68 RSI: ffffa0010c91caa8 RDI: ffffffff83a788eb
  RBP: ffffaf7c04607ac8 R08: 0000000000000000 R09: ffffaf7c04607a68
  R10: 0000000000000000 R11: 0000000000000001 R12: ffffaf7c04607b90
  R13: 000000000000000e R14: 0000000000000000 R15: 00000000ffffa001
  FS:  0000146fa1f1cdc0(0000) GS:ffffa0012fac0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000001b8 CR3: 000000007680a003 CR4: 00000000001606e0
  Call Trace:
   dev_err+0x6c/0x90
   ? dev_printk_emit+0x4e/0x70
   bnxt_qplib_rcfw_send_message+0x594/0x660 [bnxt_re]
   ? dev_err+0x6c/0x90
   bnxt_qplib_free_mrw+0x80/0xe0 [bnxt_re]
   bnxt_re_dereg_mr+0x2e/0xd0 [bnxt_re]
   ib_dereg_mr+0x2f/0x50 [ib_core]
   destroy_hw_idr_uobject+0x20/0x70 [ib_uverbs]
   uverbs_destroy_uobject+0x2e/0x170 [ib_uverbs]
   __uverbs_cleanup_ufile+0x6e/0x90 [ib_uverbs]
   uverbs_destroy_ufile_hw+0x61/0x130 [ib_uverbs]
   ib_uverbs_close+0x1f/0x80 [ib_uverbs]
   __fput+0xb7/0x230
   task_work_run+0x8a/0xb0
   do_exit+0x2da/0xb40
...
  RIP: 0033:0x146fa113a387
  Code: Bad RIP value.
  RSP: 002b:00007fff945d1478 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff02
  RAX: 0000000000000000 RBX: 000055a248908d70 RCX: 0000000000000000
  RDX: 0000146fa1f2b000 RSI: 0000000000000001 RDI: 000055a248906488
  RBP: 000055a248909630 R08: 0000000000010000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 000055a248906488
  R13: 0000000000000001 R14: 0000000000000000 R15: 000055a2489095f0

Do not free the MR structures, when driver returns error to the stack.

Fixes: 872f3578241d ("RDMA/bnxt_re: Add support for MRs with Huge pages")
Link: https://lore.kernel.org/r/1574671174-5064-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/bnxt_re/ib_verbs.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -3323,8 +3323,10 @@ int bnxt_re_dereg_mr(struct ib_mr *ib_mr
 	int rc;
 
 	rc = bnxt_qplib_free_mrw(&rdev->qplib_res, &mr->qplib_mr);
-	if (rc)
+	if (rc) {
 		dev_err(rdev_to_dev(rdev), "Dereg MR failed: %#x\n", rc);
+		return rc;
+	}
 
 	if (mr->pages) {
 		rc = bnxt_qplib_free_fast_reg_page_list(&rdev->qplib_res,

[PATCH 5.4 005/203] RDMA/bnxt_re: Fix Send Work Entry state check while polling completions

[Greg Kroah-Hartman]

From: Selvin Xavier <selvin.xavier@broadcom.com>

commit c5275723580922e5f3264f96751337661a153c7d upstream.

Some adapters need a fence Work Entry to handle retransmission.  Currently
the driver checks for this condition, only if the Send queue entry is
signalled. Implement the condition check, irrespective of the signalled
state of the Work queue entries

Failure to add the fence can result in access to memory that is already
marked as completed, triggering data corruption, transmission failure,
IOMMU failures, etc.

Fixes: 9152e0b722b2 ("RDMA/bnxt_re: HW workarounds for handling specific conditions")
Link: https://lore.kernel.org/r/1574671174-5064-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/bnxt_re/qplib_fp.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
@@ -2283,13 +2283,13 @@ static int bnxt_qplib_cq_process_req(str
 			/* Add qp to flush list of the CQ */
 			bnxt_qplib_add_flush_qp(qp);
 		} else {
+			/* Before we complete, do WA 9060 */
+			if (do_wa9060(qp, cq, cq_cons, sw_sq_cons,
+				      cqe_sq_cons)) {
+				*lib_qp = qp;
+				goto out;
+			}
 			if (swq->flags & SQ_SEND_FLAGS_SIGNAL_COMP) {
-				/* Before we complete, do WA 9060 */
-				if (do_wa9060(qp, cq, cq_cons, sw_sq_cons,
-					      cqe_sq_cons)) {
-					*lib_qp = qp;
-					goto out;
-				}
 				cqe->status = CQ_REQ_STATUS_OK;
 				cqe++;
 				(*budget)--;

[PATCH 5.4 006/203] IB/hfi1: Dont cancel unused work item

[Greg Kroah-Hartman]

From: Kaike Wan <kaike.wan@intel.com>

commit ca9033ba69c7e3477f207df69867b2ea969197c8 upstream.

In the iowait structure, two iowait_work entries were included to queue a
given object: one for normal IB operations, and the other for TID RDMA
operations. For non-TID RDMA operations, the iowait_work structure for TID
RDMA is initialized to contain a NULL function (not used). When the QP is
reset, the function iowait_cancel_work will be called to cancel any
pending work. The problem is that this function will call
cancel_work_sync() for both iowait_work entries, even though the one for
TID RDMA is not used at all. Eventually, the call cascades to
__flush_work(), wherein a WARN_ON will be triggered due to the fact that
work->func is NULL.

The WARN_ON was introduced in commit 4d43d395fed1 ("workqueue: Try to
catch flush_work() without INIT_WORK().")

This patch fixes the issue by making sure that a work function is present
for TID RDMA before calling cancel_work_sync in iowait_cancel_work.

Fixes: 4d43d395fed1 ("workqueue: Try to catch flush_work() without INIT_WORK().")
Fixes: 5da0fc9dbf89 ("IB/hfi1: Prepare resource waits for dual leg")
Link: https://lore.kernel.org/r/20191219211941.58387.39883.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hfi1/iowait.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/hw/hfi1/iowait.c
+++ b/drivers/infiniband/hw/hfi1/iowait.c
@@ -81,7 +81,9 @@ void iowait_init(struct iowait *wait, u3
 void iowait_cancel_work(struct iowait *w)
 {
 	cancel_work_sync(&iowait_get_ib_work(w)->iowork);
-	cancel_work_sync(&iowait_get_tid_work(w)->iowork);
+	/* Make sure that the iowork for TID RDMA is used */
+	if (iowait_get_tid_work(w)->iowork.func)
+		cancel_work_sync(&iowait_get_tid_work(w)->iowork);
 }
 
 /**

[PATCH 5.4 007/203] mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus

[Greg Kroah-Hartman]

From: Christophe Kerello <christophe.kerello@st.com>

commit 4114b17af41272e14939b000ce8f3ed7ba937e3c upstream.

We are currently using nand_soft_waitrdy to poll the status of the NAND
flash. FMC2 enables the wait feature bit (this feature is mandatory for
the sequencer mode). By enabling this feature, we can't poll the status
of the NAND flash, the read status command is stucked in FMC2 pipeline
until R/B# signal is high, and locks the CPU bus.
To avoid to lock the CPU bus, we poll FMC2 ISR register. This register
reports the status of the R/B# signal.

Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/raw/stm32_fmc2_nand.c |   38 +++++++++++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -37,6 +37,7 @@
 /* Max ECC buffer length */
 #define FMC2_MAX_ECC_BUF_LEN		(FMC2_BCHDSRS_LEN * FMC2_MAX_SG)
 
+#define FMC2_TIMEOUT_US			1000
 #define FMC2_TIMEOUT_MS			1000
 
 /* Timings */
@@ -53,6 +54,8 @@
 #define FMC2_PMEM			0x88
 #define FMC2_PATT			0x8c
 #define FMC2_HECCR			0x94
+#define FMC2_ISR			0x184
+#define FMC2_ICR			0x188
 #define FMC2_CSQCR			0x200
 #define FMC2_CSQCFGR1			0x204
 #define FMC2_CSQCFGR2			0x208
@@ -118,6 +121,12 @@
 #define FMC2_PATT_ATTHIZ(x)		(((x) & 0xff) << 24)
 #define FMC2_PATT_DEFAULT		0x0a0a0a0a
 
+/* Register: FMC2_ISR */
+#define FMC2_ISR_IHLF			BIT(1)
+
+/* Register: FMC2_ICR */
+#define FMC2_ICR_CIHLF			BIT(1)
+
 /* Register: FMC2_CSQCR */
 #define FMC2_CSQCR_CSQSTART		BIT(0)
 
@@ -1322,6 +1331,31 @@ static void stm32_fmc2_write_data(struct
 		stm32_fmc2_set_buswidth_16(fmc2, true);
 }
 
+static int stm32_fmc2_waitrdy(struct nand_chip *chip, unsigned long timeout_ms)
+{
+	struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+	const struct nand_sdr_timings *timings;
+	u32 isr, sr;
+
+	/* Check if there is no pending requests to the NAND flash */
+	if (readl_relaxed_poll_timeout_atomic(fmc2->io_base + FMC2_SR, sr,
+					      sr & FMC2_SR_NWRF, 1,
+					      FMC2_TIMEOUT_US))
+		dev_warn(fmc2->dev, "Waitrdy timeout\n");
+
+	/* Wait tWB before R/B# signal is low */
+	timings = nand_get_sdr_timings(&chip->data_interface);
+	ndelay(PSEC_TO_NSEC(timings->tWB_max));
+
+	/* R/B# signal is low, clear high level flag */
+	writel_relaxed(FMC2_ICR_CIHLF, fmc2->io_base + FMC2_ICR);
+
+	/* Wait R/B# signal is high */
+	return readl_relaxed_poll_timeout_atomic(fmc2->io_base + FMC2_ISR,
+						 isr, isr & FMC2_ISR_IHLF,
+						 5, 1000 * timeout_ms);
+}
+
 static int stm32_fmc2_exec_op(struct nand_chip *chip,
 			      const struct nand_operation *op,
 			      bool check_only)
@@ -1366,8 +1400,8 @@ static int stm32_fmc2_exec_op(struct nan
 			break;
 
 		case NAND_OP_WAITRDY_INSTR:
-			ret = nand_soft_waitrdy(chip,
-						instr->ctx.waitrdy.timeout_ms);
+			ret = stm32_fmc2_waitrdy(chip,
+						 instr->ctx.waitrdy.timeout_ms);
 			break;
 		}
 	}

[PATCH 5.4 008/203] i2c: bcm2835: Store pointer to bus clock

[Greg Kroah-Hartman]

From: Stefan Wahren <wahrenst@gmx.net>

commit 3b722da6672df8392f9c43d7c7e04bddd81d7e37 upstream.

The commit bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF") introduced
a NULL pointer dereference on driver unload. It seems that we can't fetch
the bus clock via devm_clk_get in bcm2835_i2c_remove. As an alternative
approach store a pointer to the bus clock in the private driver structure.

Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-bcm2835.c |   17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -58,6 +58,7 @@ struct bcm2835_i2c_dev {
 	struct i2c_adapter adapter;
 	struct completion completion;
 	struct i2c_msg *curr_msg;
+	struct clk *bus_clk;
 	int num_msgs;
 	u32 msg_err;
 	u8 *msg_buf;
@@ -404,7 +405,6 @@ static int bcm2835_i2c_probe(struct plat
 	struct resource *mem, *irq;
 	int ret;
 	struct i2c_adapter *adap;
-	struct clk *bus_clk;
 	struct clk *mclk;
 	u32 bus_clk_rate;
 
@@ -427,11 +427,11 @@ static int bcm2835_i2c_probe(struct plat
 		return PTR_ERR(mclk);
 	}
 
-	bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk, i2c_dev);
+	i2c_dev->bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk, i2c_dev);
 
-	if (IS_ERR(bus_clk)) {
+	if (IS_ERR(i2c_dev->bus_clk)) {
 		dev_err(&pdev->dev, "Could not register clock\n");
-		return PTR_ERR(bus_clk);
+		return PTR_ERR(i2c_dev->bus_clk);
 	}
 
 	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
@@ -442,13 +442,13 @@ static int bcm2835_i2c_probe(struct plat
 		bus_clk_rate = 100000;
 	}
 
-	ret = clk_set_rate_exclusive(bus_clk, bus_clk_rate);
+	ret = clk_set_rate_exclusive(i2c_dev->bus_clk, bus_clk_rate);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Could not set clock frequency\n");
 		return ret;
 	}
 
-	ret = clk_prepare_enable(bus_clk);
+	ret = clk_prepare_enable(i2c_dev->bus_clk);
 	if (ret) {
 		dev_err(&pdev->dev, "Couldn't prepare clock");
 		return ret;
@@ -491,10 +491,9 @@ static int bcm2835_i2c_probe(struct plat
 static int bcm2835_i2c_remove(struct platform_device *pdev)
 {
 	struct bcm2835_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
-	struct clk *bus_clk = devm_clk_get(i2c_dev->dev, "div");
 
-	clk_rate_exclusive_put(bus_clk);
-	clk_disable_unprepare(bus_clk);
+	clk_rate_exclusive_put(i2c_dev->bus_clk);
+	clk_disable_unprepare(i2c_dev->bus_clk);
 
 	free_irq(i2c_dev->irq, i2c_dev);
 	i2c_del_adapter(&i2c_dev->adapter);

[PATCH 5.4 009/203] ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

commit 98910e1d61384430a080b4bcf986c3b0cf3fdf46 upstream.

The memory allocation failure check for priv->pd_dev is incorrectly
pointer checking priv instead of priv->pd_dev. Fix this.

Addresses-Coverity: ("Logically dead code")
Fixes: 202acc565a1f ("ASoC: SOF: imx: Add i.MX8 HW support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191204124816.1415359-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/sof/imx/imx8.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/sof/imx/imx8.c
+++ b/sound/soc/sof/imx/imx8.c
@@ -209,7 +209,7 @@ static int imx8_probe(struct snd_sof_dev
 
 	priv->pd_dev = devm_kmalloc_array(&pdev->dev, priv->num_domains,
 					  sizeof(*priv->pd_dev), GFP_KERNEL);
-	if (!priv)
+	if (!priv->pd_dev)
 		return -ENOMEM;
 
 	priv->link = devm_kmalloc_array(&pdev->dev, priv->num_domains,

[PATCH 5.4 010/203] ASoC: soc-core: Set dpcm_playback / dpcm_capture

[Greg Kroah-Hartman]

From: Daniel Baluta <daniel.baluta@nxp.com>

commit 218fe9b7ec7f32c10a07539365488d80af7b0084 upstream.

When converting a normal link to a DPCM link we need
to set dpcm_playback / dpcm_capture otherwise playback/capture
streams will not be created resulting in errors like this:

[   36.039111]  sai1-wm8960-hifi: ASoC: no backend playback stream

Fixes: a655de808cbde ("ASoC: core: Allow topology to override machine driver FE DAI link config")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20191204151333.26625-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/soc-core.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1886,6 +1886,8 @@ match:
 
 			/* convert non BE into BE */
 			dai_link->no_pcm = 1;
+			dai_link->dpcm_playback = 1;
+			dai_link->dpcm_capture = 1;
 
 			/* override any BE fixups */
 			dai_link->be_hw_params_fixup =

[PATCH 5.4 011/203] ASoC: stm32: spdifrx: fix inconsistent lock state

[Greg Kroah-Hartman]

From: Olivier Moysan <olivier.moysan@st.com>

commit 2859b1784031b5709446af8f6039c467f136e67d upstream.

In current spdifrx driver locks may be requested as follows:
- request lock on iec capture control, when starting synchronization.
- request lock in interrupt context, when spdifrx stop is called
from IRQ handler.

Take lock with IRQs disabled, to avoid the possible deadlock.

Lockdep report:
[   74.278059] ================================
[   74.282306] WARNING: inconsistent lock state
[   74.290120] --------------------------------
...
[   74.314373]        CPU0
[   74.314377]        ----
[   74.314381]   lock(&(&spdifrx->lock)->rlock);
[   74.314396]   <Interrupt>
[   74.314400]     lock(&(&spdifrx->lock)->rlock);

Fixes: 03e4d5d56fa5 ("ASoC: stm32: Add SPDIFRX support")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191204154333.7152-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/stm/stm32_spdifrx.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/sound/soc/stm/stm32_spdifrx.c
+++ b/sound/soc/stm/stm32_spdifrx.c
@@ -320,6 +320,7 @@ static void stm32_spdifrx_dma_ctrl_stop(
 static int stm32_spdifrx_start_sync(struct stm32_spdifrx_data *spdifrx)
 {
 	int cr, cr_mask, imr, ret;
+	unsigned long flags;
 
 	/* Enable IRQs */
 	imr = SPDIFRX_IMR_IFEIE | SPDIFRX_IMR_SYNCDIE | SPDIFRX_IMR_PERRIE;
@@ -327,7 +328,7 @@ static int stm32_spdifrx_start_sync(stru
 	if (ret)
 		return ret;
 
-	spin_lock(&spdifrx->lock);
+	spin_lock_irqsave(&spdifrx->lock, flags);
 
 	spdifrx->refcount++;
 
@@ -360,7 +361,7 @@ static int stm32_spdifrx_start_sync(stru
 				"Failed to start synchronization\n");
 	}
 
-	spin_unlock(&spdifrx->lock);
+	spin_unlock_irqrestore(&spdifrx->lock, flags);
 
 	return ret;
 }
@@ -368,11 +369,12 @@ static int stm32_spdifrx_start_sync(stru
 static void stm32_spdifrx_stop(struct stm32_spdifrx_data *spdifrx)
 {
 	int cr, cr_mask, reg;
+	unsigned long flags;
 
-	spin_lock(&spdifrx->lock);
+	spin_lock_irqsave(&spdifrx->lock, flags);
 
 	if (--spdifrx->refcount) {
-		spin_unlock(&spdifrx->lock);
+		spin_unlock_irqrestore(&spdifrx->lock, flags);
 		return;
 	}
 
@@ -391,7 +393,7 @@ static void stm32_spdifrx_stop(struct st
 	regmap_read(spdifrx->regmap, STM32_SPDIFRX_DR, &reg);
 	regmap_read(spdifrx->regmap, STM32_SPDIFRX_CSR, &reg);
 
-	spin_unlock(&spdifrx->lock);
+	spin_unlock_irqrestore(&spdifrx->lock, flags);
 }
 
 static int stm32_spdifrx_dma_ctrl_register(struct device *dev,

[PATCH 5.4 012/203] ASoC: stm32: spdifrx: fix race condition in irq handler

[Greg Kroah-Hartman]

From: Olivier Moysan <olivier.moysan@st.com>

commit 86e1956af4c863d653136fd6e5694adf2054dbaa upstream.

When snd_pcm_stop() is called in interrupt routine,
substream context may have already been released.
Add protection on substream context.

Fixes: 03e4d5d56fa5 ("ASoC: stm32: Add SPDIFRX support")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191204154333.7152-3-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/stm/stm32_spdifrx.c |   24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

--- a/sound/soc/stm/stm32_spdifrx.c
+++ b/sound/soc/stm/stm32_spdifrx.c
@@ -220,6 +220,7 @@
  * @slave_config: dma slave channel runtime config pointer
  * @phys_addr: SPDIFRX registers physical base address
  * @lock: synchronization enabling lock
+ * @irq_lock: prevent race condition with IRQ on stream state
  * @cs: channel status buffer
  * @ub: user data buffer
  * @irq: SPDIFRX interrupt line
@@ -240,6 +241,7 @@ struct stm32_spdifrx_data {
 	struct dma_slave_config slave_config;
 	dma_addr_t phys_addr;
 	spinlock_t lock;  /* Sync enabling lock */
+	spinlock_t irq_lock; /* Prevent race condition on stream state */
 	unsigned char cs[SPDIFRX_CS_BYTES_NB];
 	unsigned char ub[SPDIFRX_UB_BYTES_NB];
 	int irq;
@@ -665,7 +667,6 @@ static const struct regmap_config stm32_
 static irqreturn_t stm32_spdifrx_isr(int irq, void *devid)
 {
 	struct stm32_spdifrx_data *spdifrx = (struct stm32_spdifrx_data *)devid;
-	struct snd_pcm_substream *substream = spdifrx->substream;
 	struct platform_device *pdev = spdifrx->pdev;
 	unsigned int cr, mask, sr, imr;
 	unsigned int flags;
@@ -733,14 +734,19 @@ static irqreturn_t stm32_spdifrx_isr(int
 		regmap_update_bits(spdifrx->regmap, STM32_SPDIFRX_CR,
 				   SPDIFRX_CR_SPDIFEN_MASK, cr);
 
-		if (substream)
-			snd_pcm_stop(substream, SNDRV_PCM_STATE_DISCONNECTED);
+		spin_lock(&spdifrx->irq_lock);
+		if (spdifrx->substream)
+			snd_pcm_stop(spdifrx->substream,
+				     SNDRV_PCM_STATE_DISCONNECTED);
+		spin_unlock(&spdifrx->irq_lock);
 
 		return IRQ_HANDLED;
 	}
 
-	if (err_xrun && substream)
-		snd_pcm_stop_xrun(substream);
+	spin_lock(&spdifrx->irq_lock);
+	if (err_xrun && spdifrx->substream)
+		snd_pcm_stop_xrun(spdifrx->substream);
+	spin_unlock(&spdifrx->irq_lock);
 
 	return IRQ_HANDLED;
 }
@@ -749,9 +755,12 @@ static int stm32_spdifrx_startup(struct
 				 struct snd_soc_dai *cpu_dai)
 {
 	struct stm32_spdifrx_data *spdifrx = snd_soc_dai_get_drvdata(cpu_dai);
+	unsigned long flags;
 	int ret;
 
+	spin_lock_irqsave(&spdifrx->irq_lock, flags);
 	spdifrx->substream = substream;
+	spin_unlock_irqrestore(&spdifrx->irq_lock, flags);
 
 	ret = clk_prepare_enable(spdifrx->kclk);
 	if (ret)
@@ -827,8 +836,12 @@ static void stm32_spdifrx_shutdown(struc
 				   struct snd_soc_dai *cpu_dai)
 {
 	struct stm32_spdifrx_data *spdifrx = snd_soc_dai_get_drvdata(cpu_dai);
+	unsigned long flags;
 
+	spin_lock_irqsave(&spdifrx->irq_lock, flags);
 	spdifrx->substream = NULL;
+	spin_unlock_irqrestore(&spdifrx->irq_lock, flags);
+
 	clk_disable_unprepare(spdifrx->kclk);
 }
 
@@ -932,6 +945,7 @@ static int stm32_spdifrx_probe(struct pl
 	spdifrx->pdev = pdev;
 	init_completion(&spdifrx->cs_completion);
 	spin_lock_init(&spdifrx->lock);
+	spin_lock_init(&spdifrx->irq_lock);
 
 	platform_set_drvdata(pdev, spdifrx);
 

[PATCH 5.4 013/203] ASoC: stm32: spdifrx: fix input pin state management

[Greg Kroah-Hartman]

From: Olivier Moysan <olivier.moysan@st.com>

commit 3b7658679d88b5628939f9bdc8e613f79cd821f9 upstream.

Changing input state in iec capture control is not safe,
as the pin state may be changed concurrently by ASoC
framework.
Remove pin state handling in iec capture control.

Note: This introduces a restriction on capture control,
when pin sleep state is defined in device tree. In this case
channel status can be captured only when an audio stream
capture is active.

Fixes: f68c2a682d44 ("ASoC: stm32: spdifrx: add power management")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191204154333.7152-4-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/stm/stm32_spdifrx.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/sound/soc/stm/stm32_spdifrx.c
+++ b/sound/soc/stm/stm32_spdifrx.c
@@ -12,7 +12,6 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
@@ -482,8 +481,6 @@ static int stm32_spdifrx_get_ctrl_data(s
 	memset(spdifrx->cs, 0, SPDIFRX_CS_BYTES_NB);
 	memset(spdifrx->ub, 0, SPDIFRX_UB_BYTES_NB);
 
-	pinctrl_pm_select_default_state(&spdifrx->pdev->dev);
-
 	ret = stm32_spdifrx_dma_ctrl_start(spdifrx);
 	if (ret < 0)
 		return ret;
@@ -515,7 +512,6 @@ static int stm32_spdifrx_get_ctrl_data(s
 
 end:
 	clk_disable_unprepare(spdifrx->kclk);
-	pinctrl_pm_select_sleep_state(&spdifrx->pdev->dev);
 
 	return ret;
 }

[PATCH 5.4 014/203] pinctrl: lochnagar: select GPIOLIB

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit f7e36e18946b4ec756b9c5cf4fb8891be8d1e4a3 upstream.

In a rare randconfig build I came across one configuration that does
not enable CONFIG_GPIOLIB, which is needed by lochnagar:

ERROR: "devm_gpiochip_add_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!
ERROR: "gpiochip_generic_free" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!
ERROR: "gpiochip_generic_request" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!
ERROR: "gpiochip_get_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!

Add another 'select' like all other pinctrl drivers have.

Fixes: 0548448b719a ("pinctrl: lochnagar: Add support for the Cirrus Logic Lochnagar")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191218163701.171914-1-arnd@arndb.de
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/cirrus/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/pinctrl/cirrus/Kconfig
+++ b/drivers/pinctrl/cirrus/Kconfig
@@ -2,6 +2,7 @@
 config PINCTRL_LOCHNAGAR
 	tristate "Cirrus Logic Lochnagar pinctrl driver"
 	depends on MFD_LOCHNAGAR
+	select GPIOLIB
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF

[PATCH 5.4 015/203] netfilter: nft_flow_offload: fix underflow in flowtable reference counter

[Greg Kroah-Hartman]

From: wenxu <wenxu@ucloud.cn>

commit 8ca79606cdfde2e37ee4f0707b9d1874a6f0eb38 upstream.

The .deactivate and .activate interfaces already deal with the reference
counter. Otherwise, this results in spurious "Device is busy" errors.

Fixes: a3c90f7a2323 ("netfilter: nf_tables: flow offload expression")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nft_flow_offload.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/net/netfilter/nft_flow_offload.c
+++ b/net/netfilter/nft_flow_offload.c
@@ -197,9 +197,6 @@ static void nft_flow_offload_activate(co
 static void nft_flow_offload_destroy(const struct nft_ctx *ctx,
 				     const struct nft_expr *expr)
 {
-	struct nft_flow_offload *priv = nft_expr_priv(expr);
-
-	priv->flowtable->use--;
 	nf_ct_netns_put(ctx->net, ctx->family);
 }
 

[PATCH 5.4 016/203] ASoC: SOF: imx8: Fix dsp_box offset

[Greg Kroah-Hartman]

From: Daniel Baluta <daniel.baluta@nxp.com>

commit dcf08d0f8f09081b16f69071dd55d51d5e964e84 upstream.

dsp_box is used to keep DSP initiated messages. The value of dsp_offset
is set by the DSP with the first message, so we need a way to bootstrap
it in order to get the first message.

We do this by setting the correct default dsp_box offset which on i.MX8
is not zero.

Very interesting is why it has worked until now.

On i.MX8, DSP communicates with ARM core using a shared SDRAM memory
area. Actually, there are two shared areas:
	* SDRAM0 - starting at 0x92400000, size 0x800000
	* SDRAM1 - starting at 0x92C00000, size 0x800000

SDRAM0 keeps the data sections, starting with .rodata. By chance
fw_ready structure was placed at the beginning of .rodata.

dsp_box_base is defined as SDRAM0 + dsp_box_offset and it is placed
at the beginning of SDRAM1 (dsp_box_offset should be 0x800000). But
because it is zero initialized by default it points to SDRAM0 where
by chance the fw_ready was placed in the SOF firmware.

Anyhow, SOF commit 7466bee378dd811b ("clk: make freq arrays constant")
fw_ready is no longer at the beginning of SDRAM0 and everything shows
how lucky we were until now.

Fix this by properly setting the default dsp_box offset.

Fixes: 202acc565a1f050 ("ASoC: SOF: imx: Add i.MX8 HW support")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191220170531.10423-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/sof/imx/imx8.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/soc/sof/imx/imx8.c
+++ b/sound/soc/sof/imx/imx8.c
@@ -304,6 +304,9 @@ static int imx8_probe(struct snd_sof_dev
 	}
 	sdev->mailbox_bar = SOF_FW_BLK_TYPE_SRAM;
 
+	/* set default mailbox offset for FW ready message */
+	sdev->dsp_box.offset = MBOX_OFFSET;
+
 	return 0;
 
 exit_pdev_unregister:

[PATCH 5.4 017/203] mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy

[Greg Kroah-Hartman]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

commit 8bcef0d54067077cf9a6cb129022c77559926e8c upstream.

The commit converting the driver to DMAengine was missing the flags for
the memcpy prepare call.
It went unnoticed since the omap-dma driver was ignoring them.

Fixes: 3ed6a4d1de2c5 (" mtd: onenand: omap2: Convert to use dmaengine for memcp")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/onenand/omap2.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mtd/nand/onenand/omap2.c
+++ b/drivers/mtd/nand/onenand/omap2.c
@@ -328,7 +328,8 @@ static inline int omap2_onenand_dma_tran
 	struct dma_async_tx_descriptor *tx;
 	dma_cookie_t cookie;
 
-	tx = dmaengine_prep_dma_memcpy(c->dma_chan, dst, src, count, 0);
+	tx = dmaengine_prep_dma_memcpy(c->dma_chan, dst, src, count,
+				       DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
 	if (!tx) {
 		dev_err(&c->pdev->dev, "Failed to prepare DMA memcpy\n");
 		return -EIO;

[PATCH 5.4 018/203] gpio: zynq: Fix for bug in zynq_gpio_restore_context API

[Greg Kroah-Hartman]

From: Swapna Manupati <swapna.manupati@xilinx.com>

commit 36f2e7207f21a83ca0054116191f119ac64583ab upstream.

This patch writes the inverse value of Interrupt Mask Status
register into the Interrupt Enable register in
zynq_gpio_restore_context API to fix the bug.

Fixes: e11de4de28c0 ("gpio: zynq: Add support for suspend resume")
Signed-off-by: Swapna Manupati <swapna.manupati@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Link: https://lore.kernel.org/r/1577362338-28744-2-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpio-zynq.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -681,6 +681,8 @@ static void zynq_gpio_restore_context(st
 	unsigned int bank_num;
 
 	for (bank_num = 0; bank_num < gpio->p_data->max_bank; bank_num++) {
+		writel_relaxed(ZYNQ_GPIO_IXR_DISABLE_ALL, gpio->base_addr +
+				ZYNQ_GPIO_INTDIS_OFFSET(bank_num));
 		writel_relaxed(gpio->context.datalsw[bank_num],
 			       gpio->base_addr +
 			       ZYNQ_GPIO_DATA_LSW_OFFSET(bank_num));
@@ -690,9 +692,6 @@ static void zynq_gpio_restore_context(st
 		writel_relaxed(gpio->context.dirm[bank_num],
 			       gpio->base_addr +
 			       ZYNQ_GPIO_DIRM_OFFSET(bank_num));
-		writel_relaxed(gpio->context.int_en[bank_num],
-			       gpio->base_addr +
-			       ZYNQ_GPIO_INTEN_OFFSET(bank_num));
 		writel_relaxed(gpio->context.int_type[bank_num],
 			       gpio->base_addr +
 			       ZYNQ_GPIO_INTTYPE_OFFSET(bank_num));
@@ -702,6 +701,9 @@ static void zynq_gpio_restore_context(st
 		writel_relaxed(gpio->context.int_any[bank_num],
 			       gpio->base_addr +
 			       ZYNQ_GPIO_INTANY_OFFSET(bank_num));
+		writel_relaxed(~(gpio->context.int_en[bank_num]),
+			       gpio->base_addr +
+			       ZYNQ_GPIO_INTEN_OFFSET(bank_num));
 	}
 }
 

[PATCH 5.4 019/203] pinctrl: meson: Fix wrong shift value when get drive-strength

[Greg Kroah-Hartman]

From: Qianggui Song <qianggui.song@amlogic.com>

commit 35c60be220572de7d6605c4318f640d133982040 upstream.

In meson_pinconf_get_drive_strength, variable bit is calculated by
meson_calc_reg_and_bit, this value is the offset from the first pin of a
certain bank to current pin, while Meson SoCs use two bits for each pin
to depict drive-strength. So a left shift by 1 should be done or node
pinconf-pins shows wrong message.

Fixes: 6ea3e3bbef37 ("pinctrl: meson: add support of drive-strength-microamp")

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Link: https://lore.kernel.org/r/20191226023734.9631-1-qianggui.song@amlogic.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/meson/pinctrl-meson.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -441,6 +441,7 @@ static int meson_pinconf_get_drive_stren
 		return ret;
 
 	meson_calc_reg_and_bit(bank, pin, REG_DS, &reg, &bit);
+	bit = bit << 1;
 
 	ret = regmap_read(pc->reg_ds, reg, &val);
 	if (ret)

[PATCH 5.4 020/203] selftests: loopback.sh: skip this test if the driver does not support

[Greg Kroah-Hartman]

From: Hangbin Liu <liuhangbin@gmail.com>

commit cc7e3f63d7299dd1119be39aa187b867d6f8aa17 upstream.

The loopback feature is only supported on a few drivers like broadcom,
mellanox, etc. The default veth driver has not supported it yet. To avoid
returning failed and making the runner feel confused, let's just skip
the test on drivers that not support loopback.

Fixes: ad11340994d5 ("selftests: Add loopback test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/net/forwarding/loopback.sh |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/tools/testing/selftests/net/forwarding/loopback.sh
+++ b/tools/testing/selftests/net/forwarding/loopback.sh
@@ -1,6 +1,9 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
 ALL_TESTS="loopback_test"
 NUM_NETIFS=2
 source tc_common.sh
@@ -72,6 +75,11 @@ setup_prepare()
 
 	h1_create
 	h2_create
+
+	if ethtool -k $h1 | grep loopback | grep -q fixed; then
+		log_test "SKIP: dev $h1 does not support loopback feature"
+		exit $ksft_skip
+	fi
 }
 
 cleanup()

[PATCH 5.4 021/203] iommu/vt-d: Unlink device if failed to add to group

[Greg Kroah-Hartman]

From: Jon Derrick <jonathan.derrick@intel.com>

commit f78947c409204138a4bc0609f98e07ef9d01ac0a upstream.

If the device fails to be added to the group, make sure to unlink the
reference before returning.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Fixes: 39ab9555c2411 ("iommu: Add sysfs bindings for struct iommu_device")
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/intel-iommu.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -5593,8 +5593,10 @@ static int intel_iommu_add_device(struct
 
 	group = iommu_group_get_for_dev(dev);
 
-	if (IS_ERR(group))
-		return PTR_ERR(group);
+	if (IS_ERR(group)) {
+		ret = PTR_ERR(group);
+		goto unlink;
+	}
 
 	iommu_group_put(group);
 
@@ -5620,7 +5622,8 @@ static int intel_iommu_add_device(struct
 				if (!get_private_domain_for_dev(dev)) {
 					dev_warn(dev,
 						 "Failed to get a private domain.\n");
-					return -ENOMEM;
+					ret = -ENOMEM;
+					goto unlink;
 				}
 
 				dev_info(dev,
@@ -5635,6 +5638,10 @@ static int intel_iommu_add_device(struct
 	}
 
 	return 0;
+
+unlink:
+	iommu_device_unlink(&iommu->iommu, dev);
+	return ret;
 }
 
 static void intel_iommu_remove_device(struct device *dev)

[PATCH 5.4 022/203] iommu: Remove device link to group on failure

[Greg Kroah-Hartman]

From: Jon Derrick <jonathan.derrick@intel.com>

commit 7d4e6ccd1fb09dbfbc49746ca82bd5c25ad4bfe4 upstream.

This adds the missing teardown step that removes the device link from
the group when the device addition fails.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Fixes: 797a8b4d768c5 ("iommu: Handle default domain attach failure")
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/iommu.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -751,6 +751,7 @@ err_put_group:
 	mutex_unlock(&group->mutex);
 	dev->iommu_group = NULL;
 	kobject_put(group->devices_kobj);
+	sysfs_remove_link(group->devices_kobj, device->name);
 err_free_name:
 	kfree(device->name);
 err_remove_link:

[PATCH 5.4 023/203] bpf: cgroup: prevent out-of-order release of cgroup bpf

[Greg Kroah-Hartman]

From: Roman Gushchin <guro@fb.com>

commit e10360f815ca6367357b2c2cfef17fc663e50f7b upstream.

Before commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
cgroup bpf structures were released with
corresponding cgroup structures. It guaranteed the hierarchical order
of destruction: children were always first. It preserved attached
programs from being released before their propagated copies.

But with cgroup auto-detachment there are no such guarantees anymore:
cgroup bpf is released as soon as the cgroup is offline and there are
no live associated sockets. It means that an attached program can be
detached and released, while its propagated copy is still living
in the cgroup subtree. This will obviously lead to an use-after-free
bug.

To reproduce the issue the following script can be used:

  #!/bin/bash

  CGROOT=/sys/fs/cgroup

  mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C
  sleep 1

  ./test_cgrp2_attach ${CGROOT}/A egress &
  A_PID=$!
  ./test_cgrp2_attach ${CGROOT}/B egress &
  B_PID=$!

  echo $$ > ${CGROOT}/A/C/cgroup.procs
  iperf -s &
  S_PID=$!
  iperf -c localhost -t 100 &
  C_PID=$!

  sleep 1

  echo $$ > ${CGROOT}/B/cgroup.procs
  echo ${S_PID} > ${CGROOT}/B/cgroup.procs
  echo ${C_PID} > ${CGROOT}/B/cgroup.procs

  sleep 1

  rmdir ${CGROOT}/A/C
  rmdir ${CGROOT}/A

  sleep 1

  kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID}

On the unpatched kernel the following stacktrace can be obtained:

[   33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002
[   33.620677] #PF: supervisor read access in kernel mode
[   33.621293] #PF: error_code(0x0000) - not-present page
[   33.622754] Oops: 0000 [#1] SMP NOPTI
[   33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23
[   33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0
[   33.635809] Call Trace:
[   33.636118]  ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0
[   33.636728]  ? __switch_to_asm+0x40/0x70
[   33.637196]  ip_finish_output+0x68/0xa0
[   33.637654]  ip_output+0x76/0xf0
[   33.638046]  ? __ip_finish_output+0x1c0/0x1c0
[   33.638576]  __ip_queue_xmit+0x157/0x410
[   33.639049]  __tcp_transmit_skb+0x535/0xaf0
[   33.639557]  tcp_write_xmit+0x378/0x1190
[   33.640049]  ? _copy_from_iter_full+0x8d/0x260
[   33.640592]  tcp_sendmsg_locked+0x2a2/0xdc0
[   33.641098]  ? sock_has_perm+0x10/0xa0
[   33.641574]  tcp_sendmsg+0x28/0x40
[   33.641985]  sock_sendmsg+0x57/0x60
[   33.642411]  sock_write_iter+0x97/0x100
[   33.642876]  new_sync_write+0x1b6/0x1d0
[   33.643339]  vfs_write+0xb6/0x1a0
[   33.643752]  ksys_write+0xa7/0xe0
[   33.644156]  do_syscall_64+0x5b/0x1b0
[   33.644605]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by grabbing a reference to the bpf structure of each ancestor
on the initialization of the cgroup bpf structure, and dropping the
reference at the end of releasing the cgroup bpf structure.

This will restore the hierarchical order of cgroup bpf releasing,
without adding any operations on hot paths.

Thanks to Josef Bacik for the debugging and the initial analysis of
the problem.

Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/bpf/cgroup.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/kernel/bpf/cgroup.c
+++ b/kernel/bpf/cgroup.c
@@ -35,8 +35,8 @@ void cgroup_bpf_offline(struct cgroup *c
  */
 static void cgroup_bpf_release(struct work_struct *work)
 {
-	struct cgroup *cgrp = container_of(work, struct cgroup,
-					   bpf.release_work);
+	struct cgroup *p, *cgrp = container_of(work, struct cgroup,
+					       bpf.release_work);
 	enum bpf_cgroup_storage_type stype;
 	struct bpf_prog_array *old_array;
 	unsigned int type;
@@ -65,6 +65,9 @@ static void cgroup_bpf_release(struct wo
 
 	mutex_unlock(&cgroup_mutex);
 
+	for (p = cgroup_parent(cgrp); p; p = cgroup_parent(p))
+		cgroup_bpf_put(p);
+
 	percpu_ref_exit(&cgrp->bpf.refcnt);
 	cgroup_put(cgrp);
 }
@@ -199,6 +202,7 @@ int cgroup_bpf_inherit(struct cgroup *cg
  */
 #define	NR ARRAY_SIZE(cgrp->bpf.effective)
 	struct bpf_prog_array *arrays[NR] = {};
+	struct cgroup *p;
 	int ret, i;
 
 	ret = percpu_ref_init(&cgrp->bpf.refcnt, cgroup_bpf_release_fn, 0,
@@ -206,6 +210,9 @@ int cgroup_bpf_inherit(struct cgroup *cg
 	if (ret)
 		return ret;
 
+	for (p = cgroup_parent(cgrp); p; p = cgroup_parent(p))
+		cgroup_bpf_get(p);
+
 	for (i = 0; i < NR; i++)
 		INIT_LIST_HEAD(&cgrp->bpf.progs[i]);
 

[PATCH 5.4 024/203] fs: move guard_bio_eod() after bio_set_op_attrs

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

commit 83c9c547168e8b914ea6398430473a4de68c52cc upstream.

Commit 85a8ce62c2ea ("block: add bio_truncate to fix guard_bio_eod")
adds bio_truncate() for handling bio EOD. However, bio_truncate()
doesn't use the passed 'op' parameter from guard_bio_eod's callers.

So bio_trunacate() may retrieve wrong 'op', and zering pages may
not be done for READ bio.

Fixes this issue by moving guard_bio_eod() after bio_set_op_attrs()
in submit_bh_wbc() so that bio_truncate() can always retrieve correct
op info.

Meantime remove the 'op' parameter from guard_bio_eod() because it isn't
used any more.

Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Fixes: 85a8ce62c2ea ("block: add bio_truncate to fix guard_bio_eod")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fold in kerneldoc and bio_op() change.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

---
 block/bio.c   |   12 +++++++++++-
 fs/buffer.c   |    8 ++++----
 fs/internal.h |    2 +-
 fs/mpage.c    |    2 +-
 4 files changed, 17 insertions(+), 7 deletions(-)

--- a/block/bio.c
+++ b/block/bio.c
@@ -535,6 +535,16 @@ void zero_fill_bio_iter(struct bio *bio,
 }
 EXPORT_SYMBOL(zero_fill_bio_iter);
 
+/**
+ * bio_truncate - truncate the bio to small size of @new_size
+ * @bio:	the bio to be truncated
+ * @new_size:	new size for truncating the bio
+ *
+ * Description:
+ *   Truncate the bio to new size of @new_size. If bio_op(bio) is
+ *   REQ_OP_READ, zero the truncated part. This function should only
+ *   be used for handling corner cases, such as bio eod.
+ */
 void bio_truncate(struct bio *bio, unsigned new_size)
 {
 	struct bio_vec bv;
@@ -545,7 +555,7 @@ void bio_truncate(struct bio *bio, unsig
 	if (new_size >= bio->bi_iter.bi_size)
 		return;
 
-	if (bio_data_dir(bio) != READ)
+	if (bio_op(bio) != REQ_OP_READ)
 		goto exit;
 
 	bio_for_each_segment(bv, bio, iter) {
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2991,7 +2991,7 @@ static void end_bio_bh_io_sync(struct bi
  * errors, this only handles the "we need to be able to
  * do IO at the final sector" case.
  */
-void guard_bio_eod(int op, struct bio *bio)
+void guard_bio_eod(struct bio *bio)
 {
 	sector_t maxsector;
 	struct hd_struct *part;
@@ -3055,15 +3055,15 @@ static int submit_bh_wbc(int op, int op_
 	bio->bi_end_io = end_bio_bh_io_sync;
 	bio->bi_private = bh;
 
-	/* Take care of bh's that straddle the end of the device */
-	guard_bio_eod(op, bio);
-
 	if (buffer_meta(bh))
 		op_flags |= REQ_META;
 	if (buffer_prio(bh))
 		op_flags |= REQ_PRIO;
 	bio_set_op_attrs(bio, op, op_flags);
 
+	/* Take care of bh's that straddle the end of the device */
+	guard_bio_eod(bio);
+
 	if (wbc) {
 		wbc_init_bio(wbc, bio);
 		wbc_account_cgroup_owner(wbc, bh->b_page, bh->b_size);
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -38,7 +38,7 @@ static inline int __sync_blockdev(struct
 /*
  * buffer.c
  */
-extern void guard_bio_eod(int rw, struct bio *bio);
+extern void guard_bio_eod(struct bio *bio);
 extern int __block_write_begin_int(struct page *page, loff_t pos, unsigned len,
 		get_block_t *get_block, struct iomap *iomap);
 
--- a/fs/mpage.c
+++ b/fs/mpage.c
@@ -62,7 +62,7 @@ static struct bio *mpage_bio_submit(int
 {
 	bio->bi_end_io = mpage_end_io;
 	bio_set_op_attrs(bio, op, op_flags);
-	guard_bio_eod(op, bio);
+	guard_bio_eod(bio);
 	submit_bio(bio);
 	return NULL;
 }

[PATCH 5.4 025/203] scsi: mpt3sas: Fix double free in attach error handling

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit ee560e7bbab0c10cf3f0e71997fbc354ab2ee5cb upstream.

The caller also calls _base_release_memory_pools() on error so it leads to
a number of double frees:

drivers/scsi/mpt3sas/mpt3sas_base.c:7207 mpt3sas_base_attach() warn: 'ioc->chain_dma_pool' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:7207 mpt3sas_base_attach() warn: 'ioc->hpr_lookup' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:7207 mpt3sas_base_attach() warn: 'ioc->internal_lookup' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:7207 mpt3sas_base_attach() warn: 'ioc->pcie_sgl_dma_pool' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:7207 mpt3sas_base_attach() warn: 'ioc->reply_dma_pool' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:7207 mpt3sas_base_attach() warn: 'ioc->reply_free_dma_pool' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:7207 mpt3sas_base_attach() warn: 'ioc->reply_post_free_array_dma_pool' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:7207 mpt3sas_base_attach() warn: 'ioc->reply_post_free_dma_pool' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:7207 mpt3sas_base_attach() warn: 'ioc->sense_dma_pool' double freed

Fixes: 74522a92bbf0 ("scsi: mpt3sas: Optimize I/O memory consumption in driver.")
Link: https://lore.kernel.org/r/20191203093652.gyntgvnkw2udatyc@kili.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/mpt3sas/mpt3sas_base.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -5234,7 +5234,6 @@ _base_allocate_memory_pools(struct MPT3S
 					&ct->chain_buffer_dma);
 			if (!ct->chain_buffer) {
 				ioc_err(ioc, "chain_lookup: pci_pool_alloc failed\n");
-				_base_release_memory_pools(ioc);
 				goto out;
 			}
 		}

[PATCH 5.4 026/203] gpio: Fix error message on out-of-range GPIO in lookup table

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit d935bd50dd14a7714cbdba9a76435dbb56edb1ae upstream.

When a GPIO offset in a lookup table is out-of-range, the printed error
message (1) does not include the actual out-of-range value, and (2)
contains an off-by-one error in the upper bound.

Avoid user confusion by also printing the actual GPIO offset, and
correcting the upper bound of the range.
While at it, use "%u" for unsigned int.

Sample impact:

    -requested GPIO 0 is out of range [0..32] for chip e6052000.gpio
    +requested GPIO 0 (45) is out of range [0..31] for chip e6052000.gpio

Fixes: 2a3cf6a3599e9015 ("gpiolib: return -ENOENT if no GPIO mapping exists")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191127095919.4214-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpiolib.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -4328,8 +4328,9 @@ static struct gpio_desc *gpiod_find(stru
 
 		if (chip->ngpio <= p->chip_hwnum) {
 			dev_err(dev,
-				"requested GPIO %d is out of range [0..%d] for chip %s\n",
-				idx, chip->ngpio, chip->label);
+				"requested GPIO %u (%u) is out of range [0..%u] for chip %s\n",
+				idx, p->chip_hwnum, chip->ngpio - 1,
+				chip->label);
 			return ERR_PTR(-EINVAL);
 		}
 

[PATCH 5.4 027/203] PM / devfreq: tegra: Add COMMON_CLK dependency

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 5fdb0684b5b0f41402161f068d3d84bf6ed1c3f4 upstream.

Compile-testing this driver fails if CONFIG_COMMON_CLK is not set:

drivers/devfreq/tegra30-devfreq.o: In function `tegra_devfreq_target':
tegra30-devfreq.c:(.text+0x164): undefined reference to `clk_set_min_rate'

Fixes: 35f8dbc72721 ("PM / devfreq: tegra: Enable COMPILE_TEST for the driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/devfreq/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -99,6 +99,7 @@ config ARM_TEGRA_DEVFREQ
 		ARCH_TEGRA_210_SOC || \
 		COMPILE_TEST
 	select PM_OPP
+	depends on COMMON_CLK
 	help
 	  This adds the DEVFREQ driver for the Tegra family of SoCs.
 	  It reads ACTMON counters of memory controllers and adjusts the

[PATCH 5.4 028/203] PCI: amlogic: Fix probed clock names

[Greg Kroah-Hartman]

From: Neil Armstrong <narmstrong@baylibre.com>

commit eacaf7dcf08eb062a1059c6c115fa3fced3374ae upstream.

Fix the clock names used in the probe function according
to the bindings.

Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/controller/dwc/pci-meson.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -250,15 +250,15 @@ static int meson_pcie_probe_clocks(struc
 	if (IS_ERR(res->port_clk))
 		return PTR_ERR(res->port_clk);
 
-	res->mipi_gate = meson_pcie_probe_clock(dev, "pcie_mipi_en", 0);
+	res->mipi_gate = meson_pcie_probe_clock(dev, "mipi", 0);
 	if (IS_ERR(res->mipi_gate))
 		return PTR_ERR(res->mipi_gate);
 
-	res->general_clk = meson_pcie_probe_clock(dev, "pcie_general", 0);
+	res->general_clk = meson_pcie_probe_clock(dev, "general", 0);
 	if (IS_ERR(res->general_clk))
 		return PTR_ERR(res->general_clk);
 
-	res->clk = meson_pcie_probe_clock(dev, "pcie", 0);
+	res->clk = meson_pcie_probe_clock(dev, "pclk", 0);
 	if (IS_ERR(res->clk))
 		return PTR_ERR(res->clk);
 

[PATCH 5.4 029/203] drm/tegra: Fix ordering of cleanup code

[Greg Kroah-Hartman]

From: Thierry Reding <treding@nvidia.com>

commit 051172e8c1ceef8749f19faacc1d3bef65d20d8d upstream.

Commit Fixes: b9f8b09ce256 ("drm/tegra: Setup shared IOMMU domain after
initialization") changed the initialization order of the IOMMU related
bits but didn't update the cleanup path accordingly. This asymmetry can
cause failures during error recovery.

Fixes: b9f8b09ce256 ("drm/tegra: Setup shared IOMMU domain after initialization")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/tegra/drm.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -201,19 +201,19 @@ hub:
 	if (tegra->hub)
 		tegra_display_hub_cleanup(tegra->hub);
 device:
-	host1x_device_exit(device);
-fbdev:
-	drm_kms_helper_poll_fini(drm);
-	tegra_drm_fb_free(drm);
-config:
-	drm_mode_config_cleanup(drm);
-
 	if (tegra->domain) {
 		mutex_destroy(&tegra->mm_lock);
 		drm_mm_takedown(&tegra->mm);
 		put_iova_domain(&tegra->carveout.domain);
 		iova_cache_put();
 	}
+
+	host1x_device_exit(device);
+fbdev:
+	drm_kms_helper_poll_fini(drm);
+	tegra_drm_fb_free(drm);
+config:
+	drm_mode_config_cleanup(drm);
 domain:
 	if (tegra->domain)
 		iommu_domain_free(tegra->domain);

[PATCH 5.4 030/203] hsr: add hsr root debugfs directory

[Greg Kroah-Hartman]

From: Taehee Yoo <ap420073@gmail.com>

commit c6c4ccd7f96993e106dfea7ef18127f972f2db5e upstream.

In current hsr code, when hsr interface is created, it creates debugfs
directory /sys/kernel/debug/<interface name>.
If there is same directory or file name in there, it fails.
In order to reduce possibility of failure of creation of debugfs,
this patch adds root directory.

Test commands:
    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1

Before this patch:
    /sys/kernel/debug/hsr0/node_table

After this patch:
    /sys/kernel/debug/hsr/hsr0/node_table

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/hsr/hsr_debugfs.c |   23 ++++++++++++++++++++---
 net/hsr/hsr_main.c    |    1 +
 net/hsr/hsr_main.h    |    6 ++++++
 net/hsr/hsr_netlink.c |    1 +
 4 files changed, 28 insertions(+), 3 deletions(-)

--- a/net/hsr/hsr_debugfs.c
+++ b/net/hsr/hsr_debugfs.c
@@ -20,6 +20,8 @@
 #include "hsr_main.h"
 #include "hsr_framereg.h"
 
+static struct dentry *hsr_debugfs_root_dir;
+
 static void print_mac_address(struct seq_file *sfp, unsigned char *mac)
 {
 	seq_printf(sfp, "%02x:%02x:%02x:%02x:%02x:%02x:",
@@ -81,9 +83,9 @@ void hsr_debugfs_init(struct hsr_priv *p
 {
 	struct dentry *de = NULL;
 
-	de = debugfs_create_dir(hsr_dev->name, NULL);
+	de = debugfs_create_dir(hsr_dev->name, hsr_debugfs_root_dir);
 	if (IS_ERR(de)) {
-		pr_err("Cannot create hsr debugfs root\n");
+		pr_err("Cannot create hsr debugfs directory\n");
 		return;
 	}
 
@@ -93,7 +95,7 @@ void hsr_debugfs_init(struct hsr_priv *p
 				 priv->node_tbl_root, priv,
 				 &hsr_fops);
 	if (IS_ERR(de)) {
-		pr_err("Cannot create hsr node_table directory\n");
+		pr_err("Cannot create hsr node_table file\n");
 		debugfs_remove(priv->node_tbl_root);
 		priv->node_tbl_root = NULL;
 		return;
@@ -115,3 +117,18 @@ hsr_debugfs_term(struct hsr_priv *priv)
 	debugfs_remove(priv->node_tbl_root);
 	priv->node_tbl_root = NULL;
 }
+
+void hsr_debugfs_create_root(void)
+{
+	hsr_debugfs_root_dir = debugfs_create_dir("hsr", NULL);
+	if (IS_ERR(hsr_debugfs_root_dir)) {
+		pr_err("Cannot create hsr debugfs root directory\n");
+		hsr_debugfs_root_dir = NULL;
+	}
+}
+
+void hsr_debugfs_remove_root(void)
+{
+	/* debugfs_remove() internally checks NULL and ERROR */
+	debugfs_remove(hsr_debugfs_root_dir);
+}
--- a/net/hsr/hsr_main.c
+++ b/net/hsr/hsr_main.c
@@ -123,6 +123,7 @@ static void __exit hsr_exit(void)
 {
 	unregister_netdevice_notifier(&hsr_nb);
 	hsr_netlink_exit();
+	hsr_debugfs_remove_root();
 }
 
 module_init(hsr_init);
--- a/net/hsr/hsr_main.h
+++ b/net/hsr/hsr_main.h
@@ -187,12 +187,18 @@ static inline u16 hsr_get_skb_sequence_n
 #if IS_ENABLED(CONFIG_DEBUG_FS)
 void hsr_debugfs_init(struct hsr_priv *priv, struct net_device *hsr_dev);
 void hsr_debugfs_term(struct hsr_priv *priv);
+void hsr_debugfs_create_root(void);
+void hsr_debugfs_remove_root(void);
 #else
 static inline void hsr_debugfs_init(struct hsr_priv *priv,
 				    struct net_device *hsr_dev)
 {}
 static inline void hsr_debugfs_term(struct hsr_priv *priv)
 {}
+static inline void hsr_debugfs_create_root(void)
+{}
+static inline void hsr_debugfs_remove_root(void)
+{}
 #endif
 
 #endif /*  __HSR_PRIVATE_H */
--- a/net/hsr/hsr_netlink.c
+++ b/net/hsr/hsr_netlink.c
@@ -476,6 +476,7 @@ int __init hsr_netlink_init(void)
 	if (rc)
 		goto fail_genl_register_family;
 
+	hsr_debugfs_create_root();
 	return 0;
 
 fail_genl_register_family:

[PATCH 5.4 031/203] hsr: rename debugfs file when interface name is changed

[Greg Kroah-Hartman]

From: Taehee Yoo <ap420073@gmail.com>

commit 4c2d5e33dcd3a6333a7895be3b542ff3d373177c upstream.

hsr interface has own debugfs file, which name is same with interface name.
So, interface name is changed, debugfs file name should be changed too.

Fixes: fc4ecaeebd26 ("net: hsr: add debugfs support for display node list")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/hsr/hsr_debugfs.c |   13 +++++++++++++
 net/hsr/hsr_main.c    |    3 +++
 net/hsr/hsr_main.h    |    4 ++++
 3 files changed, 20 insertions(+)

--- a/net/hsr/hsr_debugfs.c
+++ b/net/hsr/hsr_debugfs.c
@@ -65,6 +65,19 @@ hsr_node_table_open(struct inode *inode,
 	return single_open(filp, hsr_node_table_show, inode->i_private);
 }
 
+void hsr_debugfs_rename(struct net_device *dev)
+{
+	struct hsr_priv *priv = netdev_priv(dev);
+	struct dentry *d;
+
+	d = debugfs_rename(hsr_debugfs_root_dir, priv->node_tbl_root,
+			   hsr_debugfs_root_dir, dev->name);
+	if (IS_ERR(d))
+		netdev_warn(dev, "failed to rename\n");
+	else
+		priv->node_tbl_root = d;
+}
+
 static const struct file_operations hsr_fops = {
 	.open	= hsr_node_table_open,
 	.read	= seq_read,
--- a/net/hsr/hsr_main.c
+++ b/net/hsr/hsr_main.c
@@ -45,6 +45,9 @@ static int hsr_netdev_notify(struct noti
 	case NETDEV_CHANGE:	/* Link (carrier) state changes */
 		hsr_check_carrier_and_operstate(hsr);
 		break;
+	case NETDEV_CHANGENAME:
+		hsr_debugfs_rename(dev);
+		break;
 	case NETDEV_CHANGEADDR:
 		if (port->type == HSR_PT_MASTER) {
 			/* This should not happen since there's no
--- a/net/hsr/hsr_main.h
+++ b/net/hsr/hsr_main.h
@@ -185,11 +185,15 @@ static inline u16 hsr_get_skb_sequence_n
 }
 
 #if IS_ENABLED(CONFIG_DEBUG_FS)
+void hsr_debugfs_rename(struct net_device *dev);
 void hsr_debugfs_init(struct hsr_priv *priv, struct net_device *hsr_dev);
 void hsr_debugfs_term(struct hsr_priv *priv);
 void hsr_debugfs_create_root(void);
 void hsr_debugfs_remove_root(void);
 #else
+static inline void void hsr_debugfs_rename(struct net_device *dev)
+{
+}
 static inline void hsr_debugfs_init(struct hsr_priv *priv,
 				    struct net_device *hsr_dev)
 {}

[PATCH 5.4 032/203] hsr: reset network header when supervision frame is created

[Greg Kroah-Hartman]

From: Taehee Yoo <ap420073@gmail.com>

commit 3ed0a1d563903bdb4b4c36c58c4d9c1bcb23a6e6 upstream.

The supervision frame is L2 frame.
When supervision frame is created, hsr module doesn't set network header.
If tap routine is enabled, dev_queue_xmit_nit() is called and it checks
network_header. If network_header pointer wasn't set(or invalid),
it resets network_header and warns.
In order to avoid unnecessary warning message, resetting network_header
is needed.

Test commands:
    ip netns add nst
    ip link add veth0 type veth peer name veth1
    ip link add veth2 type veth peer name veth3
    ip link set veth1 netns nst
    ip link set veth3 netns nst
    ip link set veth0 up
    ip link set veth2 up
    ip link add hsr0 type hsr slave1 veth0 slave2 veth2
    ip a a 192.168.100.1/24 dev hsr0
    ip link set hsr0 up
    ip netns exec nst ip link set veth1 up
    ip netns exec nst ip link set veth3 up
    ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3
    ip netns exec nst ip a a 192.168.100.2/24 dev hsr1
    ip netns exec nst ip link set hsr1 up
    tcpdump -nei veth0

Splat looks like:
[  175.852292][    C3] protocol 88fb is buggy, dev veth0

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/hsr/hsr_device.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/hsr/hsr_device.c
+++ b/net/hsr/hsr_device.c
@@ -272,6 +272,8 @@ static void send_hsr_supervision_frame(s
 			    skb->dev->dev_addr, skb->len) <= 0)
 		goto out;
 	skb_reset_mac_header(skb);
+	skb_reset_network_header(skb);
+	skb_reset_transport_header(skb);
 
 	if (hsr_ver > 0) {
 		hsr_tag = skb_put(skb, sizeof(struct hsr_tag));

[PATCH 5.4 033/203] s390/qeth: fix qdio teardown after early init error

[Greg Kroah-Hartman]

From: Julian Wiedmann <jwi@linux.ibm.com>

commit 8b5026bc16938920e4780b9094c3bf20e1e0939d upstream.

qeth_l?_set_online() goes through a number of initialization steps, and
on any error uses qeth_l?_stop_card() to tear down the residual state.

The first initialization step is qeth_core_hardsetup_card(). When this
fails after having established a QDIO context on the device
(ie. somewhere after qeth_mpc_initialize()), qeth_l?_stop_card() doesn't
shut down this QDIO context again (since the card state hasn't
progressed from DOWN at this stage).

Even worse, we then call qdio_free() as final teardown step to free the
QDIO data structures - while some of them are still hooked into wider
QDIO infrastructure such as the IRQ list. This is inevitably followed by
use-after-frees and other nastyness.

Fix this by unconditionally calling qeth_qdio_clear_card() to shut down
the QDIO context, and also to halt/clear any pending activity on the
various IO channels.
Remove the naive attempt at handling the teardown in
qeth_mpc_initialize(), it clearly doesn't suffice and we're handling it
properly now in the wider teardown code.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/net/qeth_core_main.c |   20 ++++++++------------
 drivers/s390/net/qeth_l2_main.c   |    2 +-
 drivers/s390/net/qeth_l3_main.c   |    2 +-
 3 files changed, 10 insertions(+), 14 deletions(-)

--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2451,50 +2451,46 @@ static int qeth_mpc_initialize(struct qe
 	rc = qeth_cm_enable(card);
 	if (rc) {
 		QETH_CARD_TEXT_(card, 2, "2err%d", rc);
-		goto out_qdio;
+		return rc;
 	}
 	rc = qeth_cm_setup(card);
 	if (rc) {
 		QETH_CARD_TEXT_(card, 2, "3err%d", rc);
-		goto out_qdio;
+		return rc;
 	}
 	rc = qeth_ulp_enable(card);
 	if (rc) {
 		QETH_CARD_TEXT_(card, 2, "4err%d", rc);
-		goto out_qdio;
+		return rc;
 	}
 	rc = qeth_ulp_setup(card);
 	if (rc) {
 		QETH_CARD_TEXT_(card, 2, "5err%d", rc);
-		goto out_qdio;
+		return rc;
 	}
 	rc = qeth_alloc_qdio_queues(card);
 	if (rc) {
 		QETH_CARD_TEXT_(card, 2, "5err%d", rc);
-		goto out_qdio;
+		return rc;
 	}
 	rc = qeth_qdio_establish(card);
 	if (rc) {
 		QETH_CARD_TEXT_(card, 2, "6err%d", rc);
 		qeth_free_qdio_queues(card);
-		goto out_qdio;
+		return rc;
 	}
 	rc = qeth_qdio_activate(card);
 	if (rc) {
 		QETH_CARD_TEXT_(card, 2, "7err%d", rc);
-		goto out_qdio;
+		return rc;
 	}
 	rc = qeth_dm_act(card);
 	if (rc) {
 		QETH_CARD_TEXT_(card, 2, "8err%d", rc);
-		goto out_qdio;
+		return rc;
 	}
 
 	return 0;
-out_qdio:
-	qeth_qdio_clear_card(card, !IS_IQD(card));
-	qdio_free(CARD_DDEV(card));
-	return rc;
 }
 
 void qeth_print_status_message(struct qeth_card *card)
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -287,12 +287,12 @@ static void qeth_l2_stop_card(struct qet
 		card->state = CARD_STATE_HARDSETUP;
 	}
 	if (card->state == CARD_STATE_HARDSETUP) {
-		qeth_qdio_clear_card(card, 0);
 		qeth_drain_output_queues(card);
 		qeth_clear_working_pool_list(card);
 		card->state = CARD_STATE_DOWN;
 	}
 
+	qeth_qdio_clear_card(card, 0);
 	flush_workqueue(card->event_wq);
 	card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED;
 	card->info.promisc_mode = 0;
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -1426,12 +1426,12 @@ static void qeth_l3_stop_card(struct qet
 		card->state = CARD_STATE_HARDSETUP;
 	}
 	if (card->state == CARD_STATE_HARDSETUP) {
-		qeth_qdio_clear_card(card, 0);
 		qeth_drain_output_queues(card);
 		qeth_clear_working_pool_list(card);
 		card->state = CARD_STATE_DOWN;
 	}
 
+	qeth_qdio_clear_card(card, 0);
 	flush_workqueue(card->event_wq);
 	card->info.promisc_mode = 0;
 }

[PATCH 5.4 034/203] s390/qeth: fix false reporting of VNIC CHAR config failure

[Greg Kroah-Hartman]

From: Alexandra Winter <wintera@linux.ibm.com>

commit 68c57bfd52836e31bff33e5e1fc64029749d2c35 upstream.

Symptom: Error message "Configuring the VNIC characteristics failed"
in dmesg whenever an OSA interface on z15 is set online.

The VNIC characteristics get re-programmed when setting a L2 device
online. This follows the selected 'wanted' characteristics - with the
exception that the INVISIBLE characteristic unconditionally gets
switched off.

For devices that don't support INVISIBLE (ie. OSA), the resulting
IO failure raises a noisy error message
("Configuring the VNIC characteristics failed").
For IQD, INVISIBLE is off by default anyways.

So don't unnecessarily special-case the INVISIBLE characteristic, and
thereby suppress the misleading error message on OSA devices.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/net/qeth_l2_main.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -2072,7 +2072,6 @@ static void qeth_l2_vnicc_init(struct qe
 	error |= qeth_l2_vnicc_recover_timeout(card, QETH_VNICC_LEARNING,
 					       timeout);
 	chars_tmp = card->options.vnicc.wanted_chars ^ QETH_VNICC_DEFAULT;
-	chars_tmp |= QETH_VNICC_BRIDGE_INVISIBLE;
 	chars_len = sizeof(card->options.vnicc.wanted_chars) * BITS_PER_BYTE;
 	for_each_set_bit(i, &chars_tmp, chars_len) {
 		vnicc = BIT(i);

[PATCH 5.4 035/203] s390/qeth: Fix vnicc_is_in_use if rx_bcast not set

[Greg Kroah-Hartman]

From: Alexandra Winter <wintera@linux.ibm.com>

commit e8a66d800471e2df7f0b484e2e46898b21d1fa82 upstream.

Symptom: After vnicc/rx_bcast has been manually set to 0,
	bridge_* sysfs parameters can still be set or written.
Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast.

Vnic characteristics and bridgeport settings are mutually exclusive.
rx_bcast defaults to 1, so manually setting it to 0 should disable
bridge_* parameters.

Instead it makes sense here to check the supported mask. If the card
does not support vnicc at all, bridge commands are always allowed.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/net/qeth_l2_main.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -1983,8 +1983,7 @@ int qeth_l2_vnicc_get_timeout(struct qet
 /* check if VNICC is currently enabled */
 bool qeth_l2_vnicc_is_in_use(struct qeth_card *card)
 {
-	/* if everything is turned off, VNICC is not active */
-	if (!card->options.vnicc.cur_chars)
+	if (!card->options.vnicc.sup_chars)
 		return false;
 	/* default values are only OK if rx_bcast was not enabled by user
 	 * or the card is offline.

[PATCH 5.4 036/203] s390/qeth: vnicc Fix init to default

[Greg Kroah-Hartman]

From: Alexandra Winter <wintera@linux.ibm.com>

commit d1b9ae1864fc3c000e0eb4af8482d78c63e0915a upstream.

During vnicc_init wanted_char should be compared to cur_char and not
to QETH_VNICC_DEFAULT. Without this patch there is no way to enforce
the default values as desired values.

Note, that it is expected, that a card comes online with default values.
This patch was tested with private card firmware.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/net/qeth_l2_main.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -2070,7 +2070,9 @@ static void qeth_l2_vnicc_init(struct qe
 	/* enforce assumed default values and recover settings, if changed  */
 	error |= qeth_l2_vnicc_recover_timeout(card, QETH_VNICC_LEARNING,
 					       timeout);
-	chars_tmp = card->options.vnicc.wanted_chars ^ QETH_VNICC_DEFAULT;
+	/* Change chars, if necessary  */
+	chars_tmp = card->options.vnicc.wanted_chars ^
+		    card->options.vnicc.cur_chars;
 	chars_len = sizeof(card->options.vnicc.wanted_chars) * BITS_PER_BYTE;
 	for_each_set_bit(i, &chars_tmp, chars_len) {
 		vnicc = BIT(i);

[PATCH 5.4 037/203] s390/qeth: fix initialization on old HW

[Greg Kroah-Hartman]

From: Julian Wiedmann <jwi@linux.ibm.com>

commit 0b698c838e84149b690c7e979f78cccb6f8aa4b9 upstream.

I stumbled over an old OSA model that claims to support DIAG_ASSIST,
but then rejects the cmd to query its DIAG capabilities.

In the old code this was ok, as the returned raw error code was > 0.
Now that we translate the raw codes to errnos, the "rc < 0" causes us
to fail the initialization of the device.

The fix is trivial: don't bail out when the DIAG query fails. Such an
error is not critical, we can still use the device (with a slightly
reduced set of features).

Fixes: 742d4d40831d ("s390/qeth: convert remaining legacy cmd callbacks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/net/qeth_core_main.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -4968,10 +4968,8 @@ retriable:
 	}
 	if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST)) {
 		rc = qeth_query_setdiagass(card);
-		if (rc < 0) {
+		if (rc)
 			QETH_CARD_TEXT_(card, 2, "8err%d", rc);
-			goto out;
-		}
 	}
 	return 0;
 out:

[PATCH 5.4 038/203] cifs: Adjust indentation in smb2_open_file

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

commit 7935799e041ae10d380d04ea23868240f082bd11 upstream.

Clang warns:

../fs/cifs/smb2file.c:70:3: warning: misleading indentation; statement
is not part of the previous 'if' [-Wmisleading-indentation]
         if (oparms->tcon->use_resilient) {
         ^
../fs/cifs/smb2file.c:66:2: note: previous statement is here
        if (rc)
        ^
1 warning generated.

This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.

Fixes: 592fafe644bf ("Add resilienthandles mount parm")
Link: https://github.com/ClangBuiltLinux/linux/issues/826
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/cifs/smb2file.c
+++ b/fs/cifs/smb2file.c
@@ -67,7 +67,7 @@ smb2_open_file(const unsigned int xid, s
 		goto out;
 
 
-	 if (oparms->tcon->use_resilient) {
+	if (oparms->tcon->use_resilient) {
 		/* default timeout is 0, servers pick default (120 seconds) */
 		nr_ioctl_req.Timeout =
 			cpu_to_le32(oparms->tcon->handle_timeout);

[PATCH 5.4 039/203] scsi: smartpqi: Update attribute name to `driver_version`

[Greg Kroah-Hartman]

From: Paul Menzel <pmenzel@molgen.mpg.de>

commit a2bdd0c904da12b223c8d7218e98138d4e6d9f4f upstream.

The file name in the documentation is currently incorrect, so fix it.

Link: https://lore.kernel.org/r/fe264d62-0371-ea59-b66a-6d855290ce65@molgen.mpg.de
Fixes: 6d90615f1346 ("scsi: smartpqi: add sysfs entries")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/scsi/smartpqi.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/scsi/smartpqi.txt
+++ b/Documentation/scsi/smartpqi.txt
@@ -29,7 +29,7 @@ smartpqi specific entries in /sys
   smartpqi host attributes:
   -------------------------
   /sys/class/scsi_host/host*/rescan
-  /sys/class/scsi_host/host*/version
+  /sys/class/scsi_host/host*/driver_version
 
   The host rescan attribute is a write only attribute. Writing to this
   attribute will trigger the driver to scan for new, changed, or removed

[PATCH 5.4 040/203] MAINTAINERS: Append missed file to the database

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit 44fe5cb32c7599a4059931a98794e0418619aa96 upstream.

When gpiolib.h internal header had been split to few, the commit 77cb907abe6c
("gpiolib: acpi: Split ACPI stuff to gpiolib-acpi.h") in particular missed
the MAINTAINERS database update. Do it here.

Fixes: 77cb907abe6c ("gpiolib: acpi: Split ACPI stuff to gpiolib-acpi.h")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 MAINTAINERS |    1 +
 1 file changed, 1 insertion(+)

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6973,6 +6973,7 @@ L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	Documentation/firmware-guide/acpi/gpio-properties.rst
 F:	drivers/gpio/gpiolib-acpi.c
+F:	drivers/gpio/gpiolib-acpi.h
 
 GPIO IR Transmitter
 M:	Sean Young <sean@mess.org>

[PATCH 5.4 041/203] ath9k: use iowrite32 over __raw_writel

[Greg Kroah-Hartman]

From: Christian Lamparter <chunkeey@gmail.com>

commit 22d0d5ae7a089967e9295a06694aa3e8a812b15e upstream.

This patch changes the ath9k_pci_owl_loader to use the
same iowrite32 memory accessor that ath9k_pci is using
to communicate with the PCI(e) chip.

This will fix endian issues that came up during testing
with loaned AVM Fritz!Box 7360 (Lantiq MIPS SoCs + AR9287).

Fixes: 5a4f2040fd07 ("ath9k: add loader for AR92XX (and older) pci(e)")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
+++ b/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
@@ -84,7 +84,7 @@ static int ath9k_pci_fixup(struct pci_de
 			val = swahb32(val);
 		}
 
-		__raw_writel(val, mem + reg);
+		iowrite32(val, mem + reg);
 		usleep_range(100, 120);
 	}
 

[PATCH 5.4 042/203] can: j1939: fix address claim code example

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

commit 8ac9d71d601374222a230804e419cd40c4492e1c upstream.

During development the define J1939_PGN_ADDRESS_REQUEST was renamed to
J1939_PGN_REQUEST. It was forgotten to adjust the documentation
accordingly.

This patch fixes the name of the symbol.

Reported-by: https://github.com/linux-can/can-utils/issues/159#issuecomment-556538798
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/networking/j1939.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/networking/j1939.rst
+++ b/Documentation/networking/j1939.rst
@@ -339,7 +339,7 @@ To claim an address following code examp
 			.pgn = J1939_PGN_ADDRESS_CLAIMED,
 			.pgn_mask = J1939_PGN_PDU1_MAX,
 		}, {
-			.pgn = J1939_PGN_ADDRESS_REQUEST,
+			.pgn = J1939_PGN_REQUEST,
 			.pgn_mask = J1939_PGN_PDU1_MAX,
 		}, {
 			.pgn = J1939_PGN_ADDRESS_COMMANDED,

[PATCH 5.4 043/203] dt-bindings: reset: Fix brcmstb-reset example

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

commit 392a9f63058f2cdcec8363b849a25532ee40da9f upstream.

The reset controller has a #reset-cells value of 1, so we should see a
phandle plus a register identifier, fix the example.

Fixes: 0807caf647dd ("dt-bindings: reset: Add document for Broadcom STB reset controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
+++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
@@ -22,6 +22,6 @@ Example:
 	};
 
 	&ethernet_switch {
-		resets = <&reset>;
+		resets = <&reset 26>;
 		reset-names = "switch";
 	};

[PATCH 5.4 044/203] reset: brcmstb: Remove resource checks

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

commit ce89d8d3a70fa530e16f0b0f8994385a214cd0c0 upstream.

The use of IS_ALIGNED() is incorrect, the typical resource we pass looks
like this: start: 0x8404318, size: 0x30. When using IS_ALIGNED() we will
get the following 0x8404318 & (0x18 - 1) = 0x10 which is definitively
not equal to 0, same goes with the size. These two checks would make the
driver fail probing.

Remove the resource checks, since there should be no constraint on the
base addresse or size.

Fixes: 77750bc089e4 ("reset: Add Broadcom STB SW_INIT reset controller driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/reset/reset-brcmstb.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/drivers/reset/reset-brcmstb.c
+++ b/drivers/reset/reset-brcmstb.c
@@ -91,12 +91,6 @@ static int brcmstb_reset_probe(struct pl
 		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!IS_ALIGNED(res->start, SW_INIT_BANK_SIZE) ||
-	    !IS_ALIGNED(resource_size(res), SW_INIT_BANK_SIZE)) {
-		dev_err(kdev, "incorrect register range\n");
-		return -EINVAL;
-	}
-
 	priv->base = devm_ioremap_resource(kdev, res);
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);

[PATCH 5.4 045/203] afs: Fix missing cell comparison in afs_test_super()

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 106bc79843c3c6f4f00753d1f46e54e815f99377 upstream.

Fix missing cell comparison in afs_test_super().  Without this, any pair
volumes that have the same volume ID will share a superblock, no matter the
cell, unless they're in different network namespaces.

Normally, most users will only deal with a single cell and so they won't
see this.  Even if they do look into a second cell, they won't see a
problem unless they happen to hit a volume with the same ID as one they've
already got mounted.

Before the patch:

    # ls /afs/grand.central.org/archive
    linuxdev/  mailman/  moin/  mysql/  pipermail/  stage/  twiki/
    # ls /afs/kth.se/
    linuxdev/  mailman/  moin/  mysql/  pipermail/  stage/  twiki/
    # cat /proc/mounts | grep afs
    none /afs afs rw,relatime,dyn,autocell 0 0
    #grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0
    #grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0
    #grand.central.org:root.archive /afs/kth.se afs ro,relatime 0 0

After the patch:

    # ls /afs/grand.central.org/archive
    linuxdev/  mailman/  moin/  mysql/  pipermail/  stage/  twiki/
    # ls /afs/kth.se/
    admin/        common/  install/  OldFiles/  service/  system/
    bakrestores/  home/    misc/     pkg/       src/      wsadmin/
    # cat /proc/mounts | grep afs
    none /afs afs rw,relatime,dyn,autocell 0 0
    #grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0
    #grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0
    #kth.se:root.cell /afs/kth.se afs ro,relatime 0 0

Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Carsten Jacobi <jacobi@de.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
cc: Todd DeSantis <atd@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/afs/super.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -404,6 +404,7 @@ static int afs_test_super(struct super_b
 	return (as->net_ns == fc->net_ns &&
 		as->volume &&
 		as->volume->vid == ctx->volume->vid &&
+		as->cell == ctx->cell &&
 		!as->dyn_root);
 }
 

[PATCH 5.4 046/203] perf vendor events s390: Remove name from L1D_RO_EXCL_WRITES description

[Greg Kroah-Hartman]

From: Ed Maste <emaste@freebsd.org>

commit 58b3bafff8257c6946df5d6aeb215b8ac839ed2a upstream.

In 7fcfa9a2d9 an unintended prefix "Counter:18 Name:" was removed from
the description for L1D_RO_EXCL_WRITES, but the extra name remained in
the description.  Remove it too.

Fixes: 7fcfa9a2d9a7 ("perf list: Fix s390 counter long description for L1D_RO_EXCL_WRITES")
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: http://lore.kernel.org/lkml/20191212145346.5026-1-emaste@freefall.freebsd.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/pmu-events/arch/s390/cf_z14/extended.json |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/pmu-events/arch/s390/cf_z14/extended.json
+++ b/tools/perf/pmu-events/arch/s390/cf_z14/extended.json
@@ -4,7 +4,7 @@
 		"EventCode": "128",
 		"EventName": "L1D_RO_EXCL_WRITES",
 		"BriefDescription": "L1D Read-only Exclusive Writes",
-		"PublicDescription": "L1D_RO_EXCL_WRITES A directory write to the Level-1 Data cache where the line was originally in a Read-Only state in the cache but has been updated to be in the Exclusive state that allows stores to the cache line"
+		"PublicDescription": "A directory write to the Level-1 Data cache where the line was originally in a Read-Only state in the cache but has been updated to be in the Exclusive state that allows stores to the cache line"
 	},
 	{
 		"Unit": "CPU-M-CF",

[PATCH 5.4 047/203] syscalls/x86: Wire up COMPAT_SYSCALL_DEFINE0

[Greg Kroah-Hartman]

From: Andy Lutomirski <luto@kernel.org>

commit cf3b83e19d7c928e05a5d193c375463182c6029a upstream.

x86 has special handling for COMPAT_SYSCALL_DEFINEx, but there was
no override for COMPAT_SYSCALL_DEFINE0.  Wire it up so that we can
use it for rt_sigreturn.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191008224049.115427-3-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/syscall_wrapper.h |   32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

--- a/arch/x86/include/asm/syscall_wrapper.h
+++ b/arch/x86/include/asm/syscall_wrapper.h
@@ -28,13 +28,21 @@
  * kernel/sys_ni.c and SYS_NI in kernel/time/posix-stubs.c to cover this
  * case as well.
  */
+#define __IA32_COMPAT_SYS_STUB0(x, name)				\
+	asmlinkage long __ia32_compat_sys_##name(const struct pt_regs *regs);\
+	ALLOW_ERROR_INJECTION(__ia32_compat_sys_##name, ERRNO);		\
+	asmlinkage long __ia32_compat_sys_##name(const struct pt_regs *regs)\
+	{								\
+		return __se_compat_sys_##name();			\
+	}
+
 #define __IA32_COMPAT_SYS_STUBx(x, name, ...)				\
 	asmlinkage long __ia32_compat_sys##name(const struct pt_regs *regs);\
 	ALLOW_ERROR_INJECTION(__ia32_compat_sys##name, ERRNO);		\
 	asmlinkage long __ia32_compat_sys##name(const struct pt_regs *regs)\
 	{								\
 		return __se_compat_sys##name(SC_IA32_REGS_TO_ARGS(x,__VA_ARGS__));\
-	}								\
+	}
 
 #define __IA32_SYS_STUBx(x, name, ...)					\
 	asmlinkage long __ia32_sys##name(const struct pt_regs *regs);	\
@@ -76,15 +84,24 @@
  * of the x86-64-style parameter ordering of x32 syscalls. The syscalls common
  * with x86_64 obviously do not need such care.
  */
+#define __X32_COMPAT_SYS_STUB0(x, name, ...)				\
+	asmlinkage long __x32_compat_sys_##name(const struct pt_regs *regs);\
+	ALLOW_ERROR_INJECTION(__x32_compat_sys_##name, ERRNO);		\
+	asmlinkage long __x32_compat_sys_##name(const struct pt_regs *regs)\
+	{								\
+		return __se_compat_sys_##name();\
+	}
+
 #define __X32_COMPAT_SYS_STUBx(x, name, ...)				\
 	asmlinkage long __x32_compat_sys##name(const struct pt_regs *regs);\
 	ALLOW_ERROR_INJECTION(__x32_compat_sys##name, ERRNO);		\
 	asmlinkage long __x32_compat_sys##name(const struct pt_regs *regs)\
 	{								\
 		return __se_compat_sys##name(SC_X86_64_REGS_TO_ARGS(x,__VA_ARGS__));\
-	}								\
+	}
 
 #else /* CONFIG_X86_X32 */
+#define __X32_COMPAT_SYS_STUB0(x, name)
 #define __X32_COMPAT_SYS_STUBx(x, name, ...)
 #endif /* CONFIG_X86_X32 */
 
@@ -95,6 +112,17 @@
  * mapping of registers to parameters, we need to generate stubs for each
  * of them.
  */
+#define COMPAT_SYSCALL_DEFINE0(name)					\
+	static long __se_compat_sys_##name(void);			\
+	static inline long __do_compat_sys_##name(void);		\
+	__IA32_COMPAT_SYS_STUB0(x, name)				\
+	__X32_COMPAT_SYS_STUB0(x, name)					\
+	static long __se_compat_sys_##name(void)			\
+	{								\
+		return __do_compat_sys_##name();			\
+	}								\
+	static inline long __do_compat_sys_##name(void)
+
 #define COMPAT_SYSCALL_DEFINEx(x, name, ...)					\
 	static long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__));	\
 	static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__));\

[PATCH 5.4 048/203] syscalls/x86: Use COMPAT_SYSCALL_DEFINE0 for IA32 (rt_)sigreturn

[Greg Kroah-Hartman]

From: Sami Tolvanen <samitolvanen@google.com>

commit 00198a6eaf66609de5e4de9163bb42c7ca9dd7b7 upstream.

Use COMPAT_SYSCALL_DEFINE0 to define (rt_)sigreturn() syscalls to
replace sys32_sigreturn() and sys32_rt_sigreturn(). This fixes indirect
call mismatches with Control-Flow Integrity (CFI) checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191008224049.115427-4-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/entry/syscalls/syscall_32.tbl |    4 ++--
 arch/x86/ia32/ia32_signal.c            |    5 +++--
 2 files changed, 5 insertions(+), 4 deletions(-)

--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -130,7 +130,7 @@
 116	i386	sysinfo			sys_sysinfo			__ia32_compat_sys_sysinfo
 117	i386	ipc			sys_ipc				__ia32_compat_sys_ipc
 118	i386	fsync			sys_fsync			__ia32_sys_fsync
-119	i386	sigreturn		sys_sigreturn			sys32_sigreturn
+119	i386	sigreturn		sys_sigreturn			__ia32_compat_sys_sigreturn
 120	i386	clone			sys_clone			__ia32_compat_sys_x86_clone
 121	i386	setdomainname		sys_setdomainname		__ia32_sys_setdomainname
 122	i386	uname			sys_newuname			__ia32_sys_newuname
@@ -184,7 +184,7 @@
 170	i386	setresgid		sys_setresgid16			__ia32_sys_setresgid16
 171	i386	getresgid		sys_getresgid16			__ia32_sys_getresgid16
 172	i386	prctl			sys_prctl			__ia32_sys_prctl
-173	i386	rt_sigreturn		sys_rt_sigreturn		sys32_rt_sigreturn
+173	i386	rt_sigreturn		sys_rt_sigreturn		__ia32_compat_sys_rt_sigreturn
 174	i386	rt_sigaction		sys_rt_sigaction		__ia32_compat_sys_rt_sigaction
 175	i386	rt_sigprocmask		sys_rt_sigprocmask		__ia32_compat_sys_rt_sigprocmask
 176	i386	rt_sigpending		sys_rt_sigpending		__ia32_compat_sys_rt_sigpending
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -21,6 +21,7 @@
 #include <linux/personality.h>
 #include <linux/compat.h>
 #include <linux/binfmts.h>
+#include <linux/syscalls.h>
 #include <asm/ucontext.h>
 #include <linux/uaccess.h>
 #include <asm/fpu/internal.h>
@@ -118,7 +119,7 @@ static int ia32_restore_sigcontext(struc
 	return err;
 }
 
-asmlinkage long sys32_sigreturn(void)
+COMPAT_SYSCALL_DEFINE0(sigreturn)
 {
 	struct pt_regs *regs = current_pt_regs();
 	struct sigframe_ia32 __user *frame = (struct sigframe_ia32 __user *)(regs->sp-8);
@@ -144,7 +145,7 @@ badframe:
 	return 0;
 }
 
-asmlinkage long sys32_rt_sigreturn(void)
+COMPAT_SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct pt_regs *regs = current_pt_regs();
 	struct rt_sigframe_ia32 __user *frame;

[PATCH 5.4 049/203] syscalls/x86: Use the correct function type for sys_ni_syscall

[Greg Kroah-Hartman]

From: Sami Tolvanen <samitolvanen@google.com>

commit f48f01a92cca09e86d46c91d8edf9d5a71c61727 upstream.

Use the correct function type for sys_ni_syscall() in system
call tables to fix indirect call mismatches with Control-Flow
Integrity (CFI) checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191008224049.115427-5-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/entry/syscall_32.c            |    8 +++-----
 arch/x86/entry/syscall_64.c            |   14 ++++++++++----
 arch/x86/entry/syscalls/syscall_32.tbl |    4 ++--
 3 files changed, 15 insertions(+), 11 deletions(-)

--- a/arch/x86/entry/syscall_32.c
+++ b/arch/x86/entry/syscall_32.c
@@ -10,13 +10,11 @@
 #ifdef CONFIG_IA32_EMULATION
 /* On X86_64, we use struct pt_regs * to pass parameters to syscalls */
 #define __SYSCALL_I386(nr, sym, qual) extern asmlinkage long sym(const struct pt_regs *);
-
-/* this is a lie, but it does not hurt as sys_ni_syscall just returns -EINVAL */
-extern asmlinkage long sys_ni_syscall(const struct pt_regs *);
-
+#define __sys_ni_syscall __ia32_sys_ni_syscall
 #else /* CONFIG_IA32_EMULATION */
 #define __SYSCALL_I386(nr, sym, qual) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
 extern asmlinkage long sys_ni_syscall(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
+#define __sys_ni_syscall sys_ni_syscall
 #endif /* CONFIG_IA32_EMULATION */
 
 #include <asm/syscalls_32.h>
@@ -29,6 +27,6 @@ __visible const sys_call_ptr_t ia32_sys_
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.
 	 */
-	[0 ... __NR_syscall_compat_max] = &sys_ni_syscall,
+	[0 ... __NR_syscall_compat_max] = &__sys_ni_syscall,
 #include <asm/syscalls_32.h>
 };
--- a/arch/x86/entry/syscall_64.c
+++ b/arch/x86/entry/syscall_64.c
@@ -4,11 +4,17 @@
 #include <linux/linkage.h>
 #include <linux/sys.h>
 #include <linux/cache.h>
+#include <linux/syscalls.h>
 #include <asm/asm-offsets.h>
 #include <asm/syscall.h>
 
-/* this is a lie, but it does not hurt as sys_ni_syscall just returns -EINVAL */
-extern asmlinkage long sys_ni_syscall(const struct pt_regs *);
+extern asmlinkage long sys_ni_syscall(void);
+
+SYSCALL_DEFINE0(ni_syscall)
+{
+	return sys_ni_syscall();
+}
+
 #define __SYSCALL_64(nr, sym, qual) extern asmlinkage long sym(const struct pt_regs *);
 #define __SYSCALL_X32(nr, sym, qual) __SYSCALL_64(nr, sym, qual)
 #include <asm/syscalls_64.h>
@@ -23,7 +29,7 @@ asmlinkage const sys_call_ptr_t sys_call
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.
 	 */
-	[0 ... __NR_syscall_max] = &sys_ni_syscall,
+	[0 ... __NR_syscall_max] = &__x64_sys_ni_syscall,
 #include <asm/syscalls_64.h>
 };
 
@@ -40,7 +46,7 @@ asmlinkage const sys_call_ptr_t x32_sys_
 	 * Smells like a compiler bug -- it doesn't work
 	 * when the & below is removed.
 	 */
-	[0 ... __NR_syscall_x32_max] = &sys_ni_syscall,
+	[0 ... __NR_syscall_x32_max] = &__x64_sys_ni_syscall,
 #include <asm/syscalls_64.h>
 };
 
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -124,7 +124,7 @@
 110	i386	iopl			sys_iopl			__ia32_sys_iopl
 111	i386	vhangup			sys_vhangup			__ia32_sys_vhangup
 112	i386	idle
-113	i386	vm86old			sys_vm86old			sys_ni_syscall
+113	i386	vm86old			sys_vm86old			__ia32_sys_ni_syscall
 114	i386	wait4			sys_wait4			__ia32_compat_sys_wait4
 115	i386	swapoff			sys_swapoff			__ia32_sys_swapoff
 116	i386	sysinfo			sys_sysinfo			__ia32_compat_sys_sysinfo
@@ -177,7 +177,7 @@
 163	i386	mremap			sys_mremap			__ia32_sys_mremap
 164	i386	setresuid		sys_setresuid16			__ia32_sys_setresuid16
 165	i386	getresuid		sys_getresuid16			__ia32_sys_getresuid16
-166	i386	vm86			sys_vm86			sys_ni_syscall
+166	i386	vm86			sys_vm86			__ia32_sys_ni_syscall
 167	i386	query_module
 168	i386	poll			sys_poll			__ia32_sys_poll
 169	i386	nfsservctl

[PATCH 5.4 050/203] syscalls/x86: Fix function types in COND_SYSCALL

[Greg Kroah-Hartman]

From: Sami Tolvanen <samitolvanen@google.com>

commit 6e4847640c6aebcaa2d9b3686cecc91b41f09269 upstream.

Define a weak function in COND_SYSCALL instead of a weak alias to
sys_ni_syscall(), which has an incompatible type. This fixes indirect
call mismatches with Control-Flow Integrity (CFI) checking.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191008224049.115427-6-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/syscall_wrapper.h |   21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

--- a/arch/x86/include/asm/syscall_wrapper.h
+++ b/arch/x86/include/asm/syscall_wrapper.h
@@ -6,6 +6,8 @@
 #ifndef _ASM_X86_SYSCALL_WRAPPER_H
 #define _ASM_X86_SYSCALL_WRAPPER_H
 
+struct pt_regs;
+
 /* Mapping of registers to parameters for syscalls on x86-64 and x32 */
 #define SC_X86_64_REGS_TO_ARGS(x, ...)					\
 	__MAP(x,__SC_ARGS						\
@@ -64,9 +66,15 @@
 	SYSCALL_ALIAS(__ia32_sys_##sname, __x64_sys_##sname);		\
 	asmlinkage long __x64_sys_##sname(const struct pt_regs *__unused)
 
-#define COND_SYSCALL(name)						\
-	cond_syscall(__x64_sys_##name);					\
-	cond_syscall(__ia32_sys_##name)
+#define COND_SYSCALL(name)							\
+	asmlinkage __weak long __x64_sys_##name(const struct pt_regs *__unused)	\
+	{									\
+		return sys_ni_syscall();					\
+	}									\
+	asmlinkage __weak long __ia32_sys_##name(const struct pt_regs *__unused)\
+	{									\
+		return sys_ni_syscall();					\
+	}
 
 #define SYS_NI(name)							\
 	SYSCALL_ALIAS(__x64_sys_##name, sys_ni_posix_timers);		\
@@ -218,7 +226,11 @@
 #endif
 
 #ifndef COND_SYSCALL
-#define COND_SYSCALL(name) cond_syscall(__x64_sys_##name)
+#define COND_SYSCALL(name) 							\
+	asmlinkage __weak long __x64_sys_##name(const struct pt_regs *__unused)	\
+	{									\
+		return sys_ni_syscall();					\
+	}
 #endif
 
 #ifndef SYS_NI
@@ -230,7 +242,6 @@
  * For VSYSCALLS, we need to declare these three syscalls with the new
  * pt_regs-based calling convention for in-kernel use.
  */
-struct pt_regs;
 asmlinkage long __x64_sys_getcpu(const struct pt_regs *regs);
 asmlinkage long __x64_sys_gettimeofday(const struct pt_regs *regs);
 asmlinkage long __x64_sys_time(const struct pt_regs *regs);

[PATCH 5.4 051/203] hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename()

[Greg Kroah-Hartman]

From: Taehee Yoo <ap420073@gmail.com>

commit 04b69426d846cd04ca9acefff1ea39e1c64d2714 upstream.

hsr slave interfaces don't have debugfs directory.
So, hsr_debugfs_rename() shouldn't be called when hsr slave interface name
is changed.

Test commands:
    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1
    ip link set dummy0 name ap

Splat looks like:
[21071.899367][T22666] ap: renamed from dummy0
[21071.914005][T22666] ==================================================================
[21071.919008][T22666] BUG: KASAN: slab-out-of-bounds in hsr_debugfs_rename+0xaa/0xb0 [hsr]
[21071.923640][T22666] Read of size 8 at addr ffff88805febcd98 by task ip/22666
[21071.926941][T22666]
[21071.927750][T22666] CPU: 0 PID: 22666 Comm: ip Not tainted 5.5.0-rc2+ #240
[21071.929919][T22666] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[21071.935094][T22666] Call Trace:
[21071.935867][T22666]  dump_stack+0x96/0xdb
[21071.936687][T22666]  ? hsr_debugfs_rename+0xaa/0xb0 [hsr]
[21071.937774][T22666]  print_address_description.constprop.5+0x1be/0x360
[21071.939019][T22666]  ? hsr_debugfs_rename+0xaa/0xb0 [hsr]
[21071.940081][T22666]  ? hsr_debugfs_rename+0xaa/0xb0 [hsr]
[21071.940949][T22666]  __kasan_report+0x12a/0x16f
[21071.941758][T22666]  ? hsr_debugfs_rename+0xaa/0xb0 [hsr]
[21071.942674][T22666]  kasan_report+0xe/0x20
[21071.943325][T22666]  hsr_debugfs_rename+0xaa/0xb0 [hsr]
[21071.944187][T22666]  hsr_netdev_notify+0x1fe/0x9b0 [hsr]
[21071.945052][T22666]  ? __module_text_address+0x13/0x140
[21071.945897][T22666]  notifier_call_chain+0x90/0x160
[21071.946743][T22666]  dev_change_name+0x419/0x840
[21071.947496][T22666]  ? __read_once_size_nocheck.constprop.6+0x10/0x10
[21071.948600][T22666]  ? netdev_adjacent_rename_links+0x280/0x280
[21071.949577][T22666]  ? __read_once_size_nocheck.constprop.6+0x10/0x10
[21071.950672][T22666]  ? lock_downgrade+0x6e0/0x6e0
[21071.951345][T22666]  ? do_setlink+0x811/0x2ef0
[21071.951991][T22666]  do_setlink+0x811/0x2ef0
[21071.952613][T22666]  ? is_bpf_text_address+0x81/0xe0
[ ... ]

Reported-by: syzbot+9328206518f08318a5fd@syzkaller.appspotmail.com
Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/hsr/hsr_main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/hsr/hsr_main.c
+++ b/net/hsr/hsr_main.c
@@ -46,7 +46,8 @@ static int hsr_netdev_notify(struct noti
 		hsr_check_carrier_and_operstate(hsr);
 		break;
 	case NETDEV_CHANGENAME:
-		hsr_debugfs_rename(dev);
+		if (is_hsr_master(dev))
+			hsr_debugfs_rename(dev);
 		break;
 	case NETDEV_CHANGEADDR:
 		if (port->type == HSR_PT_MASTER) {

[PATCH 5.4 052/203] btrfs: simplify inode locking for RWF_NOWAIT

[Greg Kroah-Hartman]

From: Goldwyn Rodrigues <rgoldwyn@suse.com>

commit 9cf35f673583ccc9f3e2507498b3079d56614ad3 upstream.

This is similar to 942491c9e6d6 ("xfs: fix AIM7 regression"). Apparently
our current rwsem code doesn't like doing the trylock, then lock for
real scheme. This causes extra contention on the lock and can be
measured eg. by AIM7 benchmark.  So change our read/write methods to
just do the trylock for the RWF_NOWAIT case.

Fixes: edf064e7c6fe ("btrfs: nowait aio support")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/file.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1903,9 +1903,10 @@ static ssize_t btrfs_file_write_iter(str
 	    (iocb->ki_flags & IOCB_NOWAIT))
 		return -EOPNOTSUPP;
 
-	if (!inode_trylock(inode)) {
-		if (iocb->ki_flags & IOCB_NOWAIT)
+	if (iocb->ki_flags & IOCB_NOWAIT) {
+		if (!inode_trylock(inode))
 			return -EAGAIN;
+	} else {
 		inode_lock(inode);
 	}
 

[PATCH 5.4 053/203] netfilter: nf_tables_offload: release flow_rule on error from commit path

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 23403cd8898dbc9808d3eb2f63bc1db8a340b751 upstream.

If hardware offload commit path fails, release all flow_rule objects.

Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nf_tables_offload.c |   26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

--- a/net/netfilter/nf_tables_offload.c
+++ b/net/netfilter/nf_tables_offload.c
@@ -358,14 +358,14 @@ int nft_flow_rule_offload_commit(struct
 				continue;
 
 			if (trans->ctx.flags & NLM_F_REPLACE ||
-			    !(trans->ctx.flags & NLM_F_APPEND))
-				return -EOPNOTSUPP;
-
+			    !(trans->ctx.flags & NLM_F_APPEND)) {
+				err = -EOPNOTSUPP;
+				break;
+			}
 			err = nft_flow_offload_rule(trans->ctx.chain,
 						    nft_trans_rule(trans),
 						    nft_trans_flow_rule(trans),
 						    FLOW_CLS_REPLACE);
-			nft_flow_rule_destroy(nft_trans_flow_rule(trans));
 			break;
 		case NFT_MSG_DELRULE:
 			if (!(trans->ctx.chain->flags & NFT_CHAIN_HW_OFFLOAD))
@@ -379,7 +379,23 @@ int nft_flow_rule_offload_commit(struct
 		}
 
 		if (err)
-			return err;
+			break;
+	}
+
+	list_for_each_entry(trans, &net->nft.commit_list, list) {
+		if (trans->ctx.family != NFPROTO_NETDEV)
+			continue;
+
+		switch (trans->msg_type) {
+		case NFT_MSG_NEWRULE:
+			if (!(trans->ctx.chain->flags & NFT_CHAIN_HW_OFFLOAD))
+				continue;
+
+			nft_flow_rule_destroy(nft_trans_flow_rule(trans));
+			break;
+		default:
+			break;
+		}
 	}
 
 	return err;

[PATCH 5.4 054/203] netfilter: nft_meta: use 64-bit time arithmetic

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 6408c40c39d8eee5caaf97f5219b7dd4e041cc59 upstream.

On 32-bit architectures, get_seconds() returns an unsigned 32-bit
time value, which also matches the type used in the nft_meta
code. This will not overflow in year 2038 as a time_t would, but
it still suffers from the overflow problem later on in year 2106.

Change this instance to use the time64_t type consistently
and avoid the deprecated get_seconds().

The nft_meta_weekday() calculation potentially gets a little slower
on 32-bit architectures, but now it has the same behavior as on
64-bit architectures and does not overflow.

Fixes: 63d10e12b00d ("netfilter: nft_meta: support for time matching")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nft_meta.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/net/netfilter/nft_meta.c
+++ b/net/netfilter/nft_meta.c
@@ -33,19 +33,19 @@
 
 static DEFINE_PER_CPU(struct rnd_state, nft_prandom_state);
 
-static u8 nft_meta_weekday(unsigned long secs)
+static u8 nft_meta_weekday(time64_t secs)
 {
 	unsigned int dse;
 	u8 wday;
 
 	secs -= NFT_META_SECS_PER_MINUTE * sys_tz.tz_minuteswest;
-	dse = secs / NFT_META_SECS_PER_DAY;
+	dse = div_u64(secs, NFT_META_SECS_PER_DAY);
 	wday = (4 + dse) % NFT_META_DAYS_PER_WEEK;
 
 	return wday;
 }
 
-static u32 nft_meta_hour(unsigned long secs)
+static u32 nft_meta_hour(time64_t secs)
 {
 	struct tm tm;
 
@@ -250,10 +250,10 @@ void nft_meta_get_eval(const struct nft_
 		nft_reg_store64(dest, ktime_get_real_ns());
 		break;
 	case NFT_META_TIME_DAY:
-		nft_reg_store8(dest, nft_meta_weekday(get_seconds()));
+		nft_reg_store8(dest, nft_meta_weekday(ktime_get_real_seconds()));
 		break;
 	case NFT_META_TIME_HOUR:
-		*dest = nft_meta_hour(get_seconds());
+		*dest = nft_meta_hour(ktime_get_real_seconds());
 		break;
 	default:
 		WARN_ON(1);

[PATCH 5.4 055/203] ASoC: dt-bindings: mt8183: add missing update

[Greg Kroah-Hartman]

From: Tzung-Bi Shih <tzungbi@google.com>

commit 7cf2804775f8a388411624b3e768e55d08711e9d upstream.

Headset codec is optional.  Add missing update to DT binding document.

Fixes: a962a809e5e4 ("ASoC: mediatek: mt8183: make headset codec optional")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190920112320.166052-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
+++ b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
@@ -2,9 +2,11 @@ MT8183 with MT6358, TS3A227 and MAX98357
 
 Required properties:
 - compatible : "mediatek,mt8183_mt6358_ts3a227_max98357"
-- mediatek,headset-codec: the phandles of ts3a227 codecs
 - mediatek,platform: the phandle of MT8183 ASoC platform
 
+Optional properties:
+- mediatek,headset-codec: the phandles of ts3a227 codecs
+
 Example:
 
 	sound {

[PATCH 5.4 056/203] ASoC: simple_card_utils.h: Add missing include

[Greg Kroah-Hartman]

From: Daniel Baluta <daniel.baluta@nxp.com>

commit 4bbee14d8e5487e3d2662138e3767cf4678cdf57 upstream.

When debug is enabled compiler cannot find the definition of
clk_get_rate resulting in the following error:

./include/sound/simple_card_utils.h:168:40: note: previous implicit
declaration of ‘clk_get_rate’ was here
   dev_dbg(dev, "%s clk %luHz\n", name, clk_get_rate(dai->clk));
./include/sound/simple_card_utils.h:168:3: note: in expansion of macro
‘dev_dbg’
   dev_dbg(dev, "%s clk %luHz\n", name, clk_get_rate(dai->clk));

Fix this by including the appropriate header.

Fixes: 0580dde59438686d ("ASoC: simple-card-utils: add asoc_simple_debug_info()")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20191009153615.32105-2-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/sound/simple_card_utils.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/sound/simple_card_utils.h
+++ b/include/sound/simple_card_utils.h
@@ -8,6 +8,7 @@
 #ifndef __SIMPLE_CARD_UTILS_H
 #define __SIMPLE_CARD_UTILS_H
 
+#include <linux/clk.h>
 #include <sound/soc.h>
 
 #define asoc_simple_init_hp(card, sjack, prefix) \

[PATCH 5.4 057/203] ASoC: fsl_esai: Add spin lock to protect reset, stop and start

[Greg Kroah-Hartman]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

commit 35dac627471938eda89fa39ee4ead1f7667e0f57 upstream.

xrun may happen at the end of stream, the
trigger->fsl_esai_trigger_stop maybe called in the middle of
fsl_esai_hw_reset, this may cause esai in wrong state
after stop, and there may be endless xrun interrupt.

This issue may also happen with trigger->fsl_esai_trigger_start.

So Add spin lock to lock those functions.

Fixes: 7ccafa2b3879 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/52e92c4221a83e39a84a6cd92fc3d5479b44894c.1572252321.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/fsl/fsl_esai.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -33,6 +33,7 @@
  * @fsysclk: system clock source to derive HCK, SCK and FS
  * @spbaclk: SPBA clock (optional, depending on SoC design)
  * @task: tasklet to handle the reset operation
+ * @lock: spin lock between hw_reset() and trigger()
  * @fifo_depth: depth of tx/rx FIFO
  * @slot_width: width of each DAI slot
  * @slots: number of slots
@@ -56,6 +57,7 @@ struct fsl_esai {
 	struct clk *fsysclk;
 	struct clk *spbaclk;
 	struct tasklet_struct task;
+	spinlock_t lock; /* Protect hw_reset and trigger */
 	u32 fifo_depth;
 	u32 slot_width;
 	u32 slots;
@@ -676,8 +678,10 @@ static void fsl_esai_hw_reset(unsigned l
 {
 	struct fsl_esai *esai_priv = (struct fsl_esai *)arg;
 	bool tx = true, rx = false, enabled[2];
+	unsigned long lock_flags;
 	u32 tfcr, rfcr;
 
+	spin_lock_irqsave(&esai_priv->lock, lock_flags);
 	/* Save the registers */
 	regmap_read(esai_priv->regmap, REG_ESAI_TFCR, &tfcr);
 	regmap_read(esai_priv->regmap, REG_ESAI_RFCR, &rfcr);
@@ -715,6 +719,8 @@ static void fsl_esai_hw_reset(unsigned l
 		fsl_esai_trigger_start(esai_priv, tx);
 	if (enabled[rx])
 		fsl_esai_trigger_start(esai_priv, rx);
+
+	spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
 }
 
 static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
@@ -722,6 +728,7 @@ static int fsl_esai_trigger(struct snd_p
 {
 	struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
 	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+	unsigned long lock_flags;
 
 	esai_priv->channels[tx] = substream->runtime->channels;
 
@@ -729,12 +736,16 @@ static int fsl_esai_trigger(struct snd_p
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		spin_lock_irqsave(&esai_priv->lock, lock_flags);
 		fsl_esai_trigger_start(esai_priv, tx);
+		spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		spin_lock_irqsave(&esai_priv->lock, lock_flags);
 		fsl_esai_trigger_stop(esai_priv, tx);
+		spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
 		break;
 	default:
 		return -EINVAL;
@@ -1002,6 +1013,7 @@ static int fsl_esai_probe(struct platfor
 
 	dev_set_drvdata(&pdev->dev, esai_priv);
 
+	spin_lock_init(&esai_priv->lock);
 	ret = fsl_esai_hw_init(esai_priv);
 	if (ret)
 		return ret;

[PATCH 5.4 058/203] ASoC: SOF: Intel: Broadwell: clarify mutual exclusion with legacy driver

[Greg Kroah-Hartman]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

commit a6955fe0e2309feeab5ec71e4b0dcbe498f4f497 upstream.

Some distros select all options blindly, which leads to confusion and
bug reports. SOF does not fully support Broadwell due to firmware
dependencies, the machine drivers can only support one option, and
UCM/topology files are still being propagated to downstream distros,
so make SOF on Broadwell an opt-in option that first require distros
to opt-out of existing defaults.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204237
Fixes: f35bf70f61d3 ('ASoC: Intel: Make sure BDW based machine drivers build for SOF')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/intel/Kconfig     |    3 +++
 sound/soc/sof/intel/Kconfig |   10 +++++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)

--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -59,6 +59,9 @@ config SND_SOC_INTEL_HASWELL
 	  If you have a Intel Haswell or Broadwell platform connected to
 	  an I2S codec, then enable this option by saying Y or m. This is
 	  typically used for Chromebooks. This is a recommended option.
+	  This option is mutually exclusive with the SOF support on
+	  Broadwell. If you want to enable SOF on Broadwell, you need to
+	  deselect this option first.
 
 config SND_SOC_INTEL_BAYTRAIL
 	tristate "Baytrail (legacy) Platforms"
--- a/sound/soc/sof/intel/Kconfig
+++ b/sound/soc/sof/intel/Kconfig
@@ -76,10 +76,18 @@ config SND_SOC_SOF_BAYTRAIL
 
 config SND_SOC_SOF_BROADWELL_SUPPORT
 	bool "SOF support for Broadwell"
+	depends on SND_SOC_INTEL_HASWELL=n
 	help
 	  This adds support for Sound Open Firmware for Intel(R) platforms
 	  using the Broadwell processors.
-	  Say Y if you have such a device.
+	  This option is mutually exclusive with the Haswell/Broadwell legacy
+	  driver. If you want to enable SOF on Broadwell you need to deselect
+	  the legacy driver first.
+	  SOF does fully support Broadwell yet, so this option is not
+	  recommended for distros. At some point all legacy drivers will be
+	  deprecated but not before all userspace firmware/topology/UCM files
+	  are made available to downstream distros.
+	  Say Y if you want to enable SOF on Broadwell
 	  If unsure select "N".
 
 config SND_SOC_SOF_BROADWELL

[PATCH 5.4 059/203] ASoC: core: Fix compile warning with CONFIG_DEBUG_FS=n

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit bd0b609e0c3362cb167c51d4bd4330d79fc00987 upstream.

Paper over a compile warning:
  sound/soc/soc-pcm.c:1185:8: warning: unused variable ‘name’

Fixes: 0632fa042541 ("ASoC: core: Fix pcm code debugfs error")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191107134833.1502-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/soc-pcm.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -1148,7 +1148,9 @@ static int dpcm_be_connect(struct snd_so
 {
 	struct snd_soc_dpcm *dpcm;
 	unsigned long flags;
+#ifdef CONFIG_DEBUG_FS
 	char *name;
+#endif
 
 	/* only add new dpcms */
 	for_each_dpcm_be(fe, stream, dpcm) {

[PATCH 5.4 060/203] ASoC: rsnd: fix DALIGN register for SSIU

[Greg Kroah-Hartman]

From: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>

commit ef8e14794308a428b194f8b06ad9ae06b43466e4 upstream.

The current driver only sets 0x76543210 and 0x67452301 for DALIGN.
This doesn’t work well for TDM split and ex-split mode for all SSIU.
This patch programs the DALIGN registers based on the SSIU number.

Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Fixes: a914e44693d41b ("ASoC: rsnd: more clear rsnd_get_dalign() for DALIGN")
Signed-off-by: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191121111023.10976-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/sh/rcar/core.c |   20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

--- a/sound/soc/sh/rcar/core.c
+++ b/sound/soc/sh/rcar/core.c
@@ -376,6 +376,17 @@ u32 rsnd_get_adinr_bit(struct rsnd_mod *
  */
 u32 rsnd_get_dalign(struct rsnd_mod *mod, struct rsnd_dai_stream *io)
 {
+	static const u32 dalign_values[8][2] = {
+		{0x76543210, 0x67452301},
+		{0x00000032, 0x00000023},
+		{0x00007654, 0x00006745},
+		{0x00000076, 0x00000067},
+		{0xfedcba98, 0xefcdab89},
+		{0x000000ba, 0x000000ab},
+		{0x0000fedc, 0x0000efcd},
+		{0x000000fe, 0x000000ef},
+	};
+	int id = 0, inv;
 	struct rsnd_mod *ssiu = rsnd_io_to_mod_ssiu(io);
 	struct rsnd_mod *target;
 	struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
@@ -411,13 +422,18 @@ u32 rsnd_get_dalign(struct rsnd_mod *mod
 		target = cmd ? cmd : ssiu;
 	}
 
+	if (mod == ssiu)
+		id = rsnd_mod_id_sub(mod);
+
 	/* Non target mod or non 16bit needs normal DALIGN */
 	if ((snd_pcm_format_width(runtime->format) != 16) ||
 	    (mod != target))
-		return 0x76543210;
+		inv = 0;
 	/* Target mod needs inverted DALIGN when 16bit */
 	else
-		return 0x67452301;
+		inv = 1;
+
+	return dalign_values[id][inv];
 }
 
 u32 rsnd_get_busif_shift(struct rsnd_dai_stream *io, struct rsnd_mod *mod)

[PATCH 5.4 061/203] RDMA/hns: Prevent undefined behavior in hns_roce_set_user_sq_size()

[Greg Kroah-Hartman]

From: Jason Gunthorpe <jgg@mellanox.com>

commit 515f60004ed985d2b2f03659365752e0b6142986 upstream.

The "ucmd->log_sq_bb_count" variable is a user controlled variable in the
0-255 range.  If we shift more than then number of bits in an int then
it's undefined behavior (it shift wraps), and potentially the int could
become negative.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20190608092514.GC28890@mwanda
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hns/hns_roce_qp.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/infiniband/hw/hns/hns_roce_qp.c
+++ b/drivers/infiniband/hw/hns/hns_roce_qp.c
@@ -332,9 +332,8 @@ static int check_sq_size_with_integrity(
 	u8 max_sq_stride = ilog2(roundup_sq_stride);
 
 	/* Sanity check SQ size before proceeding */
-	if ((u32)(1 << ucmd->log_sq_bb_count) > hr_dev->caps.max_wqes ||
-	     ucmd->log_sq_stride > max_sq_stride ||
-	     ucmd->log_sq_stride < HNS_ROCE_IB_MIN_SQ_STRIDE) {
+	if (ucmd->log_sq_stride > max_sq_stride ||
+	    ucmd->log_sq_stride < HNS_ROCE_IB_MIN_SQ_STRIDE) {
 		ibdev_err(&hr_dev->ib_dev, "check SQ size error!\n");
 		return -EINVAL;
 	}
@@ -358,13 +357,16 @@ static int hns_roce_set_user_sq_size(str
 	u32 max_cnt;
 	int ret;
 
+	if (check_shl_overflow(1, ucmd->log_sq_bb_count, &hr_qp->sq.wqe_cnt) ||
+	    hr_qp->sq.wqe_cnt > hr_dev->caps.max_wqes)
+		return -EINVAL;
+
 	ret = check_sq_size_with_integrity(hr_dev, cap, ucmd);
 	if (ret) {
 		ibdev_err(&hr_dev->ib_dev, "Sanity check sq size failed\n");
 		return ret;
 	}
 
-	hr_qp->sq.wqe_cnt = 1 << ucmd->log_sq_bb_count;
 	hr_qp->sq.wqe_shift = ucmd->log_sq_stride;
 
 	max_cnt = max(1U, cap->max_send_sge);

[PATCH 5.4 062/203] RDMA/hns: remove a redundant le16_to_cpu

[Greg Kroah-Hartman]

From: Weihang Li <liweihang@hisilicon.com>

commit 9f7d7064009c37cb26eee4a83302cf077fe180d6 upstream.

Type of ah->av.vlan is u16, there will be a problem using le16_to_cpu
on it.

Fixes: 82e620d9c3a0 ("RDMA/hns: Modify the data structure of hns_roce_av")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -389,7 +389,7 @@ static int hns_roce_v2_post_send(struct
 			roce_set_field(ud_sq_wqe->byte_36,
 				       V2_UD_SEND_WQE_BYTE_36_VLAN_M,
 				       V2_UD_SEND_WQE_BYTE_36_VLAN_S,
-				       le16_to_cpu(ah->av.vlan));
+				       ah->av.vlan);
 			roce_set_field(ud_sq_wqe->byte_36,
 				       V2_UD_SEND_WQE_BYTE_36_HOPLIMIT_M,
 				       V2_UD_SEND_WQE_BYTE_36_HOPLIMIT_S,

[PATCH 5.4 063/203] RDMA/hns: Modify return value of restrack functions

[Greg Kroah-Hartman]

From: Lang Cheng <chenglang@huawei.com>

commit cfd82da4e741c16d71a12123bf0cb585af2b8796 upstream.

The restrack function return EINVAL instead of EMSGSIZE when the driver
operation fails.

Fixes: 4b42d05d0b2c ("RDMA/hns: Remove unnecessary kzalloc")
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1567566885-23088-5-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hns/hns_roce_restrack.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/hw/hns/hns_roce_restrack.c
+++ b/drivers/infiniband/hw/hns/hns_roce_restrack.c
@@ -95,7 +95,7 @@ static int hns_roce_fill_res_cq_entry(st
 
 	ret = hr_dev->dfx->query_cqc_info(hr_dev, hr_cq->cqn, (int *)context);
 	if (ret)
-		goto err;
+		return -EINVAL;
 
 	table_attr = nla_nest_start(msg, RDMA_NLDEV_ATTR_DRIVER);
 	if (!table_attr) {

[PATCH 5.4 064/203] RDMA/counter: Prevent QP counter manual binding in auto mode

[Greg Kroah-Hartman]

From: Mark Zhang <markz@mellanox.com>

commit 663912a6378a34fd4f43b8d873f0c6c6322d9d0e upstream.

If auto mode is configured, manual counter allocation and QP bind is not
allowed.

Fixes: 1bd8e0a9d0fd ("RDMA/counter: Allow manual mode configuration support")
Link: https://lore.kernel.org/r/20190916071154.20383-3-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/core/counters.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/core/counters.c
+++ b/drivers/infiniband/core/counters.c
@@ -466,10 +466,15 @@ static struct rdma_counter *rdma_get_cou
 int rdma_counter_bind_qpn(struct ib_device *dev, u8 port,
 			  u32 qp_num, u32 counter_id)
 {
+	struct rdma_port_counter *port_counter;
 	struct rdma_counter *counter;
 	struct ib_qp *qp;
 	int ret;
 
+	port_counter = &dev->port_data[port].port_counter;
+	if (port_counter->mode.mode == RDMA_COUNTER_MODE_AUTO)
+		return -EINVAL;
+
 	qp = rdma_counter_get_qp(dev, qp_num);
 	if (!qp)
 		return -ENOENT;
@@ -506,6 +511,7 @@ err:
 int rdma_counter_bind_qpn_alloc(struct ib_device *dev, u8 port,
 				u32 qp_num, u32 *counter_id)
 {
+	struct rdma_port_counter *port_counter;
 	struct rdma_counter *counter;
 	struct ib_qp *qp;
 	int ret;
@@ -513,9 +519,13 @@ int rdma_counter_bind_qpn_alloc(struct i
 	if (!rdma_is_port_valid(dev, port))
 		return -EINVAL;
 
-	if (!dev->port_data[port].port_counter.hstats)
+	port_counter = &dev->port_data[port].port_counter;
+	if (!port_counter->hstats)
 		return -EOPNOTSUPP;
 
+	if (port_counter->mode.mode == RDMA_COUNTER_MODE_AUTO)
+		return -EINVAL;
+
 	qp = rdma_counter_get_qp(dev, qp_num);
 	if (!qp)
 		return -ENOENT;

[PATCH 5.4 065/203] RDMA/siw: Fix port number endianness in a debug message

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

commit 050dbddf249eee3e936b5734c30b2e1b427efdc3 upstream.

sin_port and sin6_port are big endian member variables. Convert these port
numbers into CPU endianness before printing.

Link: https://lore.kernel.org/r/20190930231707.48259-5-bvanassche@acm.org
Fixes: 6c52fdc244b5 ("rdma/siw: connection management")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/sw/siw/siw_cm.c |    9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

--- a/drivers/infiniband/sw/siw/siw_cm.c
+++ b/drivers/infiniband/sw/siw/siw_cm.c
@@ -1867,14 +1867,7 @@ static int siw_listen_address(struct iw_
 	list_add_tail(&cep->listenq, (struct list_head *)id->provider_data);
 	cep->state = SIW_EPSTATE_LISTENING;
 
-	if (addr_family == AF_INET)
-		siw_dbg(id->device, "Listen at laddr %pI4 %u\n",
-			&(((struct sockaddr_in *)laddr)->sin_addr),
-			((struct sockaddr_in *)laddr)->sin_port);
-	else
-		siw_dbg(id->device, "Listen at laddr %pI6 %u\n",
-			&(((struct sockaddr_in6 *)laddr)->sin6_addr),
-			((struct sockaddr_in6 *)laddr)->sin6_port);
+	siw_dbg(id->device, "Listen at laddr %pISp\n", laddr);
 
 	return 0;
 

[PATCH 5.4 066/203] RDMA/hns: Fix build error again

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit d5b60e26e86a463ca83bb5ec502dda6ea685159e upstream.

This is not the first attempt to fix building random configurations,
unfortunately the attempt in commit a07fc0bb483e ("RDMA/hns: Fix build
error") caused a new problem when CONFIG_INFINIBAND_HNS_HIP06=m and
CONFIG_INFINIBAND_HNS_HIP08=y:

drivers/infiniband/hw/hns/hns_roce_main.o:(.rodata+0xe60): undefined reference to `__this_module'

Revert commits a07fc0bb483e ("RDMA/hns: Fix build error") and
a3e2d4c7e766 ("RDMA/hns: remove obsolete Kconfig comment") to get back to
the previous state, then fix the issues described there differently, by
adding more specific dependencies: INFINIBAND_HNS can now only be built-in
if at least one of HNS or HNS3 are built-in, and the individual back-ends
are only available if that code is reachable from the main driver.

Fixes: a07fc0bb483e ("RDMA/hns: Fix build error")
Fixes: a3e2d4c7e766 ("RDMA/hns: remove obsolete Kconfig comment")
Fixes: dd74282df573 ("RDMA/hns: Initialize the PCI device for hip08 RoCE")
Fixes: 08805fdbeb2d ("RDMA/hns: Split hw v1 driver from hns roce driver")
Link: https://lore.kernel.org/r/20191007211826.3361202-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hns/Kconfig  |   17 ++++++++++++++---
 drivers/infiniband/hw/hns/Makefile |    8 ++++++--
 2 files changed, 20 insertions(+), 5 deletions(-)

--- a/drivers/infiniband/hw/hns/Kconfig
+++ b/drivers/infiniband/hw/hns/Kconfig
@@ -1,23 +1,34 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config INFINIBAND_HNS
-	bool "HNS RoCE Driver"
+	tristate "HNS RoCE Driver"
 	depends on NET_VENDOR_HISILICON
 	depends on ARM64 || (COMPILE_TEST && 64BIT)
+	depends on (HNS_DSAF && HNS_ENET) || HNS3
 	---help---
 	  This is a RoCE/RDMA driver for the Hisilicon RoCE engine. The engine
 	  is used in Hisilicon Hip06 and more further ICT SoC based on
 	  platform device.
 
+	  To compile HIP06 or HIP08 driver as module, choose M here.
+
 config INFINIBAND_HNS_HIP06
-	tristate "Hisilicon Hip06 Family RoCE support"
+	bool "Hisilicon Hip06 Family RoCE support"
 	depends on INFINIBAND_HNS && HNS && HNS_DSAF && HNS_ENET
+	depends on INFINIBAND_HNS=m || (HNS_DSAF=y && HNS_ENET=y)
 	---help---
 	  RoCE driver support for Hisilicon RoCE engine in Hisilicon Hip06 and
 	  Hip07 SoC. These RoCE engines are platform devices.
 
+	  To compile this driver, choose Y here: if INFINIBAND_HNS is m, this
+	  module will be called hns-roce-hw-v1
+
 config INFINIBAND_HNS_HIP08
-	tristate "Hisilicon Hip08 Family RoCE support"
+	bool "Hisilicon Hip08 Family RoCE support"
 	depends on INFINIBAND_HNS && PCI && HNS3
+	depends on INFINIBAND_HNS=m || HNS3=y
 	---help---
 	  RoCE driver support for Hisilicon RoCE engine in Hisilicon Hip08 SoC.
 	  The RoCE engine is a PCI device.
+
+	  To compile this driver, choose Y here: if INFINIBAND_HNS is m, this
+	  module will be called hns-roce-hw-v2.
--- a/drivers/infiniband/hw/hns/Makefile
+++ b/drivers/infiniband/hw/hns/Makefile
@@ -9,8 +9,12 @@ hns-roce-objs := hns_roce_main.o hns_roc
 	hns_roce_ah.o hns_roce_hem.o hns_roce_mr.o hns_roce_qp.o \
 	hns_roce_cq.o hns_roce_alloc.o hns_roce_db.o hns_roce_srq.o hns_roce_restrack.o
 
+ifdef CONFIG_INFINIBAND_HNS_HIP06
 hns-roce-hw-v1-objs := hns_roce_hw_v1.o $(hns-roce-objs)
-obj-$(CONFIG_INFINIBAND_HNS_HIP06) += hns-roce-hw-v1.o
+obj-$(CONFIG_INFINIBAND_HNS) += hns-roce-hw-v1.o
+endif
 
+ifdef CONFIG_INFINIBAND_HNS_HIP08
 hns-roce-hw-v2-objs := hns_roce_hw_v2.o hns_roce_hw_v2_dfx.o $(hns-roce-objs)
-obj-$(CONFIG_INFINIBAND_HNS_HIP08) += hns-roce-hw-v2.o
+obj-$(CONFIG_INFINIBAND_HNS) += hns-roce-hw-v2.o
+endif

[PATCH 5.4 067/203] RDMA/hns: Release qp resources when failed to destroy qp

[Greg Kroah-Hartman]

From: Yangyang Li <liyangyang20@huawei.com>

commit d302c6e3a6895608a5856bc708c47bda1770b24d upstream.

Even if no response from hardware, we should make sure that qp related
resources are released to avoid memory leaks.

Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Link: https://lore.kernel.org/r/1570584110-3659-1-git-send-email-liweihang@hisilicon.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -4650,16 +4650,14 @@ static int hns_roce_v2_destroy_qp_common
 {
 	struct hns_roce_cq *send_cq, *recv_cq;
 	struct ib_device *ibdev = &hr_dev->ib_dev;
-	int ret;
+	int ret = 0;
 
 	if (hr_qp->ibqp.qp_type == IB_QPT_RC && hr_qp->state != IB_QPS_RESET) {
 		/* Modify qp to reset before destroying qp */
 		ret = hns_roce_v2_modify_qp(&hr_qp->ibqp, NULL, 0,
 					    hr_qp->state, IB_QPS_RESET);
-		if (ret) {
+		if (ret)
 			ibdev_err(ibdev, "modify QP to Reset failed.\n");
-			return ret;
-		}
 	}
 
 	send_cq = to_hr_cq(hr_qp->ibqp.send_cq);
@@ -4715,7 +4713,7 @@ static int hns_roce_v2_destroy_qp_common
 		kfree(hr_qp->rq_inl_buf.wqe_list);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int hns_roce_v2_destroy_qp(struct ib_qp *ibqp, struct ib_udata *udata)
@@ -4725,11 +4723,9 @@ static int hns_roce_v2_destroy_qp(struct
 	int ret;
 
 	ret = hns_roce_v2_destroy_qp_common(hr_dev, hr_qp, udata);
-	if (ret) {
+	if (ret)
 		ibdev_err(&hr_dev->ib_dev, "Destroy qp 0x%06lx failed(%d)\n",
 			  hr_qp->qpn, ret);
-		return ret;
-	}
 
 	if (hr_qp->ibqp.qp_type == IB_QPT_GSI)
 		kfree(hr_to_hr_sqp(hr_qp));

[PATCH 5.4 068/203] xprtrdma: Add unique trace points for posting Local Invalidate WRs

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit 4b93dab36f28e673725e5e6123ebfccf7697f96a upstream.

When adding frwr_unmap_async way back when, I re-used the existing
trace_xprtrdma_post_send() trace point to record the return code
of ib_post_send.

Unfortunately there are some cases where re-using that trace point
causes a crash. Instead, construct a trace point specific to posting
Local Invalidate WRs that will always be safe to use in that context,
and will act as a trace log eye-catcher for Local Invalidation.

Fixes: 847568942f93 ("xprtrdma: Remove fr_state")
Fixes: d8099feda483 ("xprtrdma: Reduce context switching due ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Bill Baker <bill.baker@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/trace/events/rpcrdma.h |   25 +++++++++++++++++++++++++
 net/sunrpc/xprtrdma/frwr_ops.c |    4 ++--
 2 files changed, 27 insertions(+), 2 deletions(-)

--- a/include/trace/events/rpcrdma.h
+++ b/include/trace/events/rpcrdma.h
@@ -735,6 +735,31 @@ TRACE_EVENT(xprtrdma_post_recvs,
 	)
 );
 
+TRACE_EVENT(xprtrdma_post_linv,
+	TP_PROTO(
+		const struct rpcrdma_req *req,
+		int status
+	),
+
+	TP_ARGS(req, status),
+
+	TP_STRUCT__entry(
+		__field(const void *, req)
+		__field(int, status)
+		__field(u32, xid)
+	),
+
+	TP_fast_assign(
+		__entry->req = req;
+		__entry->status = status;
+		__entry->xid = be32_to_cpu(req->rl_slot.rq_xid);
+	),
+
+	TP_printk("req=%p xid=0x%08x status=%d",
+		__entry->req, __entry->xid, __entry->status
+	)
+);
+
 /**
  ** Completion events
  **/
--- a/net/sunrpc/xprtrdma/frwr_ops.c
+++ b/net/sunrpc/xprtrdma/frwr_ops.c
@@ -570,7 +570,6 @@ void frwr_unmap_sync(struct rpcrdma_xprt
 	 */
 	bad_wr = NULL;
 	rc = ib_post_send(r_xprt->rx_ia.ri_id->qp, first, &bad_wr);
-	trace_xprtrdma_post_send(req, rc);
 
 	/* The final LOCAL_INV WR in the chain is supposed to
 	 * do the wake. If it was never posted, the wake will
@@ -583,6 +582,7 @@ void frwr_unmap_sync(struct rpcrdma_xprt
 
 	/* Recycle MRs in the LOCAL_INV chain that did not get posted.
 	 */
+	trace_xprtrdma_post_linv(req, rc);
 	while (bad_wr) {
 		frwr = container_of(bad_wr, struct rpcrdma_frwr,
 				    fr_invwr);
@@ -673,12 +673,12 @@ void frwr_unmap_async(struct rpcrdma_xpr
 	 */
 	bad_wr = NULL;
 	rc = ib_post_send(r_xprt->rx_ia.ri_id->qp, first, &bad_wr);
-	trace_xprtrdma_post_send(req, rc);
 	if (!rc)
 		return;
 
 	/* Recycle MRs in the LOCAL_INV chain that did not get posted.
 	 */
+	trace_xprtrdma_post_linv(req, rc);
 	while (bad_wr) {
 		frwr = container_of(bad_wr, struct rpcrdma_frwr, fr_invwr);
 		mr = container_of(frwr, struct rpcrdma_mr, frwr);

[PATCH 5.4 069/203] xprtrdma: Connection becomes unstable after a reconnect

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit a31b2f939219dd9bffdf01a45bd91f209f8cc369 upstream.

This is because xprt_request_get_cong() is allowing more than one
RPC Call to be transmitted before the first Receive on the new
connection. The first Receive fills the Receive Queue based on the
server's credit grant. Before that Receive, there is only a single
Receive WR posted because the client doesn't know the server's
credit grant.

Solution is to clear rq_cong on all outstanding rpc_rqsts when the
the cwnd is reset. This is because an RPC/RDMA credit is good for
one connection instance only.

Fixes: 75891f502f5f ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/xprtrdma/transport.c |    3 +++
 net/sunrpc/xprtrdma/verbs.c     |   22 ++++++++++++++++++++++
 2 files changed, 25 insertions(+)

--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -428,8 +428,11 @@ void xprt_rdma_close(struct rpc_xprt *xp
 	/* Prepare @xprt for the next connection by reinitializing
 	 * its credit grant to one (see RFC 8166, Section 3.3.3).
 	 */
+	spin_lock(&xprt->transport_lock);
 	r_xprt->rx_buf.rb_credits = 1;
+	xprt->cong = 0;
 	xprt->cwnd = RPC_CWNDSHIFT;
+	spin_unlock(&xprt->transport_lock);
 
 out:
 	xprt->reestablish_timeout = 0;
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -75,6 +75,7 @@
  * internal functions
  */
 static void rpcrdma_sendctx_put_locked(struct rpcrdma_sendctx *sc);
+static void rpcrdma_reqs_reset(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_reps_destroy(struct rpcrdma_buffer *buf);
 static void rpcrdma_mrs_create(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_mrs_destroy(struct rpcrdma_buffer *buf);
@@ -780,6 +781,7 @@ rpcrdma_ep_disconnect(struct rpcrdma_ep
 	trace_xprtrdma_disconnect(r_xprt, rc);
 
 	rpcrdma_xprt_drain(r_xprt);
+	rpcrdma_reqs_reset(r_xprt);
 }
 
 /* Fixed-size circular FIFO queue. This implementation is wait-free and
@@ -1042,6 +1044,26 @@ out1:
 	return NULL;
 }
 
+/**
+ * rpcrdma_reqs_reset - Reset all reqs owned by a transport
+ * @r_xprt: controlling transport instance
+ *
+ * ASSUMPTION: the rb_allreqs list is stable for the duration,
+ * and thus can be walked without holding rb_lock. Eg. the
+ * caller is holding the transport send lock to exclude
+ * device removal or disconnection.
+ */
+static void rpcrdma_reqs_reset(struct rpcrdma_xprt *r_xprt)
+{
+	struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
+	struct rpcrdma_req *req;
+
+	list_for_each_entry(req, &buf->rb_allreqs, rl_all) {
+		/* Credits are valid only for one connection */
+		req->rl_slot.rq_cong = 0;
+	}
+}
+
 static struct rpcrdma_rep *rpcrdma_rep_create(struct rpcrdma_xprt *r_xprt,
 					      bool temp)
 {

[PATCH 5.4 070/203] xprtrdma: Fix MR list handling

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit c3700780a096fc66467c81076ddf7f3f11d639b5 upstream.

Close some holes introduced by commit 6dc6ec9e04c4 ("xprtrdma: Cache
free MRs in each rpcrdma_req") that could result in list corruption.

In addition, the result that is tabulated in @count is no longer
used, so @count is removed.

Fixes: 6dc6ec9e04c4 ("xprtrdma: Cache free MRs in each rpcrdma_req")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/xprtrdma/verbs.c |   41 +++++++++++++++++++++--------------------
 1 file changed, 21 insertions(+), 20 deletions(-)

--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -79,7 +79,6 @@ static void rpcrdma_reqs_reset(struct rp
 static void rpcrdma_reps_destroy(struct rpcrdma_buffer *buf);
 static void rpcrdma_mrs_create(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_mrs_destroy(struct rpcrdma_buffer *buf);
-static void rpcrdma_mr_free(struct rpcrdma_mr *mr);
 static struct rpcrdma_regbuf *
 rpcrdma_regbuf_alloc(size_t size, enum dma_data_direction direction,
 		     gfp_t flags);
@@ -967,7 +966,7 @@ rpcrdma_mrs_create(struct rpcrdma_xprt *
 		mr->mr_xprt = r_xprt;
 
 		spin_lock(&buf->rb_lock);
-		list_add(&mr->mr_list, &buf->rb_mrs);
+		rpcrdma_mr_push(mr, &buf->rb_mrs);
 		list_add(&mr->mr_all, &buf->rb_all_mrs);
 		spin_unlock(&buf->rb_lock);
 	}
@@ -1185,10 +1184,19 @@ out:
  */
 void rpcrdma_req_destroy(struct rpcrdma_req *req)
 {
+	struct rpcrdma_mr *mr;
+
 	list_del(&req->rl_all);
 
-	while (!list_empty(&req->rl_free_mrs))
-		rpcrdma_mr_free(rpcrdma_mr_pop(&req->rl_free_mrs));
+	while ((mr = rpcrdma_mr_pop(&req->rl_free_mrs))) {
+		struct rpcrdma_buffer *buf = &mr->mr_xprt->rx_buf;
+
+		spin_lock(&buf->rb_lock);
+		list_del(&mr->mr_all);
+		spin_unlock(&buf->rb_lock);
+
+		frwr_release_mr(mr);
+	}
 
 	rpcrdma_regbuf_free(req->rl_recvbuf);
 	rpcrdma_regbuf_free(req->rl_sendbuf);
@@ -1196,24 +1204,28 @@ void rpcrdma_req_destroy(struct rpcrdma_
 	kfree(req);
 }
 
-static void
-rpcrdma_mrs_destroy(struct rpcrdma_buffer *buf)
+/**
+ * rpcrdma_mrs_destroy - Release all of a transport's MRs
+ * @buf: controlling buffer instance
+ *
+ * Relies on caller holding the transport send lock to protect
+ * removing mr->mr_list from req->rl_free_mrs safely.
+ */
+static void rpcrdma_mrs_destroy(struct rpcrdma_buffer *buf)
 {
 	struct rpcrdma_xprt *r_xprt = container_of(buf, struct rpcrdma_xprt,
 						   rx_buf);
 	struct rpcrdma_mr *mr;
-	unsigned int count;
 
-	count = 0;
 	spin_lock(&buf->rb_lock);
 	while ((mr = list_first_entry_or_null(&buf->rb_all_mrs,
 					      struct rpcrdma_mr,
 					      mr_all)) != NULL) {
+		list_del(&mr->mr_list);
 		list_del(&mr->mr_all);
 		spin_unlock(&buf->rb_lock);
 
 		frwr_release_mr(mr);
-		count++;
 		spin_lock(&buf->rb_lock);
 	}
 	spin_unlock(&buf->rb_lock);
@@ -1286,17 +1298,6 @@ void rpcrdma_mr_put(struct rpcrdma_mr *m
 	rpcrdma_mr_push(mr, &mr->mr_req->rl_free_mrs);
 }
 
-static void rpcrdma_mr_free(struct rpcrdma_mr *mr)
-{
-	struct rpcrdma_xprt *r_xprt = mr->mr_xprt;
-	struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
-
-	mr->mr_req = NULL;
-	spin_lock(&buf->rb_lock);
-	rpcrdma_mr_push(mr, &buf->rb_mrs);
-	spin_unlock(&buf->rb_lock);
-}
-
 /**
  * rpcrdma_buffer_get - Get a request buffer
  * @buffers: Buffer pool from which to obtain a buffer

[PATCH 5.4 071/203] xprtrdma: Close window between waking RPC senders and posting Receives

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit 2ae50ad68cd79224198b525f7bd645c9da98b6ff upstream.

A recent clean up attempted to separate Receive handling and RPC
Reply processing, in the name of clean layering.

Unfortunately, we can't do this because the Receive Queue has to be
refilled _after_ the most recent credit update from the responder
is parsed from the transport header, but _before_ we wake up the
next RPC sender. That is right in the middle of
rpcrdma_reply_handler().

Usually this isn't a problem because current responder
implementations don't vary their credit grant. The one exception is
when a connection is established: the grant goes from one to a much
larger number on the first Receive. The requester MUST post enough
Receives right then so that any outstanding requests can be sent
without risking RNR and connection loss.

Fixes: 6ceea36890a0 ("xprtrdma: Refactor Receive accounting")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/xprtrdma/rpc_rdma.c  |    1 +
 net/sunrpc/xprtrdma/verbs.c     |   11 +++++++----
 net/sunrpc/xprtrdma/xprt_rdma.h |    1 +
 3 files changed, 9 insertions(+), 4 deletions(-)

--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -1362,6 +1362,7 @@ void rpcrdma_reply_handler(struct rpcrdm
 		xprt->cwnd = credits << RPC_CWNDSHIFT;
 		spin_unlock(&xprt->transport_lock);
 	}
+	rpcrdma_post_recvs(r_xprt, false);
 
 	req = rpcr_to_rdmar(rqst);
 	if (req->rl_reply) {
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -84,7 +84,6 @@ rpcrdma_regbuf_alloc(size_t size, enum d
 		     gfp_t flags);
 static void rpcrdma_regbuf_dma_unmap(struct rpcrdma_regbuf *rb);
 static void rpcrdma_regbuf_free(struct rpcrdma_regbuf *rb);
-static void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp);
 
 /* Wait for outstanding transport work to finish. ib_drain_qp
  * handles the drains in the wrong order for us, so open code
@@ -170,7 +169,6 @@ rpcrdma_wc_receive(struct ib_cq *cq, str
 				   rdmab_addr(rep->rr_rdmabuf),
 				   wc->byte_len, DMA_FROM_DEVICE);
 
-	rpcrdma_post_recvs(r_xprt, false);
 	rpcrdma_reply_handler(rep);
 	return;
 
@@ -1478,8 +1476,13 @@ rpcrdma_ep_post(struct rpcrdma_ia *ia,
 	return 0;
 }
 
-static void
-rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp)
+/**
+ * rpcrdma_post_recvs - Refill the Receive Queue
+ * @r_xprt: controlling transport instance
+ * @temp: mark Receive buffers to be deleted after use
+ *
+ */
+void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp)
 {
 	struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
 	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -474,6 +474,7 @@ void rpcrdma_ep_disconnect(struct rpcrdm
 
 int rpcrdma_ep_post(struct rpcrdma_ia *, struct rpcrdma_ep *,
 				struct rpcrdma_req *);
+void rpcrdma_post_recvs(struct rpcrdma_xprt *r_xprt, bool temp);
 
 /*
  * Buffer calls - xprtrdma/verbs.c

[PATCH 5.4 072/203] RDMA/hns: Fix to support 64K page for srq

[Greg Kroah-Hartman]

From: Lijun Ou <oulijun@huawei.com>

commit 5c7e76fb7cb5071be800c938ebf2c475e140d3f0 upstream.

SRQ's page size configuration of BA and buffer should depend on current
PAGE_SHIFT, or it can't work in scenario of 64K page.

Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1571908917-16220-2-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -6088,11 +6088,11 @@ static void hns_roce_v2_write_srqc(struc
 	roce_set_field(srq_context->byte_44_idxbufpgsz_addr,
 		       SRQC_BYTE_44_SRQ_IDX_BA_PG_SZ_M,
 		       SRQC_BYTE_44_SRQ_IDX_BA_PG_SZ_S,
-		       hr_dev->caps.idx_ba_pg_sz);
+		       hr_dev->caps.idx_ba_pg_sz + PG_SHIFT_OFFSET);
 	roce_set_field(srq_context->byte_44_idxbufpgsz_addr,
 		       SRQC_BYTE_44_SRQ_IDX_BUF_PG_SZ_M,
 		       SRQC_BYTE_44_SRQ_IDX_BUF_PG_SZ_S,
-		       hr_dev->caps.idx_buf_pg_sz);
+		       hr_dev->caps.idx_buf_pg_sz + PG_SHIFT_OFFSET);
 
 	srq_context->idx_nxt_blk_addr =
 		cpu_to_le32(mtts_idx[1] >> PAGE_ADDR_SHIFT);

[PATCH 5.4 073/203] RDMA/hns: Bugfix for qpc/cqc timer configuration

[Greg Kroah-Hartman]

From: Yangyang Li <liyangyang20@huawei.com>

commit 887803db866a7a4e1817a3cb8a3eee4e9879fed2 upstream.

qpc/cqc timer entry size needs one page, but currently they are fixedly
configured to 4096, which is not appropriate in 64K page scenarios. So
they should be modified to PAGE_SIZE.

Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1571908917-16220-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
@@ -87,8 +87,8 @@
 #define HNS_ROCE_V2_MTT_ENTRY_SZ		64
 #define HNS_ROCE_V2_CQE_ENTRY_SIZE		32
 #define HNS_ROCE_V2_SCCC_ENTRY_SZ		32
-#define HNS_ROCE_V2_QPC_TIMER_ENTRY_SZ		4096
-#define HNS_ROCE_V2_CQC_TIMER_ENTRY_SZ		4096
+#define HNS_ROCE_V2_QPC_TIMER_ENTRY_SZ		PAGE_SIZE
+#define HNS_ROCE_V2_CQC_TIMER_ENTRY_SZ		PAGE_SIZE
 #define HNS_ROCE_V2_PAGE_SIZE_SUPPORTED		0xFFFFF000
 #define HNS_ROCE_V2_MAX_INNER_MTPT_NUM		2
 #define HNS_ROCE_INVALID_LKEY			0x100

[PATCH 5.4 074/203] rdma: Remove nes ABI header

[Greg Kroah-Hartman]

From: Jason Gunthorpe <jgg@mellanox.com>

commit 949b452f9cfef17e78055239f978d95ba729eee1 upstream.

This was missed when nes was removed.

Fixes: 2d3c72ed5041 ("rdma: Remove nes")
Link: https://lore.kernel.org/r/20191024135059.GA20084@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/uapi/rdma/nes-abi.h |  115 --------------------------------------------
 1 file changed, 115 deletions(-)

--- a/include/uapi/rdma/nes-abi.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR Linux-OpenIB) */
-/*
- * Copyright (c) 2006 - 2011 Intel Corporation.  All rights reserved.
- * Copyright (c) 2005 Topspin Communications.  All rights reserved.
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- */
-
-#ifndef NES_ABI_USER_H
-#define NES_ABI_USER_H
-
-#include <linux/types.h>
-
-#define NES_ABI_USERSPACE_VER 2
-#define NES_ABI_KERNEL_VER    2
-
-/*
- * Make sure that all structs defined in this file remain laid out so
- * that they pack the same way on 32-bit and 64-bit architectures (to
- * avoid incompatibility between 32-bit userspace and 64-bit kernels).
- * In particular do not use pointer types -- pass pointers in __u64
- * instead.
- */
-
-struct nes_alloc_ucontext_req {
-	__u32 reserved32;
-	__u8  userspace_ver;
-	__u8  reserved8[3];
-};
-
-struct nes_alloc_ucontext_resp {
-	__u32 max_pds; /* maximum pds allowed for this user process */
-	__u32 max_qps; /* maximum qps allowed for this user process */
-	__u32 wq_size; /* size of the WQs (sq+rq) allocated to the mmaped area */
-	__u8  virtwq;  /* flag to indicate if virtual WQ are to be used or not */
-	__u8  kernel_ver;
-	__u8  reserved[2];
-};
-
-struct nes_alloc_pd_resp {
-	__u32 pd_id;
-	__u32 mmap_db_index;
-};
-
-struct nes_create_cq_req {
-	__aligned_u64 user_cq_buffer;
-	__u32 mcrqf;
-	__u8 reserved[4];
-};
-
-struct nes_create_qp_req {
-	__aligned_u64 user_wqe_buffers;
-	__aligned_u64 user_qp_buffer;
-};
-
-enum iwnes_memreg_type {
-	IWNES_MEMREG_TYPE_MEM = 0x0000,
-	IWNES_MEMREG_TYPE_QP = 0x0001,
-	IWNES_MEMREG_TYPE_CQ = 0x0002,
-	IWNES_MEMREG_TYPE_MW = 0x0003,
-	IWNES_MEMREG_TYPE_FMR = 0x0004,
-	IWNES_MEMREG_TYPE_FMEM = 0x0005,
-};
-
-struct nes_mem_reg_req {
-	__u32 reg_type;	/* indicates if id is memory, QP or CQ */
-	__u32 reserved;
-};
-
-struct nes_create_cq_resp {
-	__u32 cq_id;
-	__u32 cq_size;
-	__u32 mmap_db_index;
-	__u32 reserved;
-};
-
-struct nes_create_qp_resp {
-	__u32 qp_id;
-	__u32 actual_sq_size;
-	__u32 actual_rq_size;
-	__u32 mmap_sq_db_index;
-	__u32 mmap_rq_db_index;
-	__u32 nes_drv_opt;
-};
-
-#endif	/* NES_ABI_USER_H */

[PATCH 5.4 075/203] RDMA/mlx5: Return proper error value

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@mellanox.com>

commit 546d30099ed204792083f043cd7e016de86016a3 upstream.

Returned value from mlx5_mr_cache_alloc() is checked to be error or real
pointer. Return proper error code instead of NULL which is not checked
later.

Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191029055721.7192-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx5/mr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -428,7 +428,7 @@ struct mlx5_ib_mr *mlx5_mr_cache_alloc(s
 
 	if (entry < 0 || entry >= MAX_MR_CACHE_ENTRIES) {
 		mlx5_ib_err(dev, "cache entry %d is out of range\n", entry);
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	ent = &cache->ent[entry];

[PATCH 5.4 076/203] RDMA/srpt: Report the SCSI residual to the initiator

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

commit e88982ad1bb12db699de96fbc07096359ef6176c upstream.

The code added by this patch is similar to the code that already exists in
ibmvscsis_determine_resid(). This patch has been tested by running the
following command:

strace sg_raw -r 1k /dev/sdb 12 00 00 00 60 00 -o inquiry.bin |&
    grep resid=

Link: https://lore.kernel.org/r/20191105214632.183302-1-bvanassche@acm.org
Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/ulp/srpt/ib_srpt.c |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -1364,9 +1364,11 @@ static int srpt_build_cmd_rsp(struct srp
 			      struct srpt_send_ioctx *ioctx, u64 tag,
 			      int status)
 {
+	struct se_cmd *cmd = &ioctx->cmd;
 	struct srp_rsp *srp_rsp;
 	const u8 *sense_data;
 	int sense_data_len, max_sense_len;
+	u32 resid = cmd->residual_count;
 
 	/*
 	 * The lowest bit of all SAM-3 status codes is zero (see also
@@ -1388,6 +1390,28 @@ static int srpt_build_cmd_rsp(struct srp
 	srp_rsp->tag = tag;
 	srp_rsp->status = status;
 
+	if (cmd->se_cmd_flags & SCF_UNDERFLOW_BIT) {
+		if (cmd->data_direction == DMA_TO_DEVICE) {
+			/* residual data from an underflow write */
+			srp_rsp->flags = SRP_RSP_FLAG_DOUNDER;
+			srp_rsp->data_out_res_cnt = cpu_to_be32(resid);
+		} else if (cmd->data_direction == DMA_FROM_DEVICE) {
+			/* residual data from an underflow read */
+			srp_rsp->flags = SRP_RSP_FLAG_DIUNDER;
+			srp_rsp->data_in_res_cnt = cpu_to_be32(resid);
+		}
+	} else if (cmd->se_cmd_flags & SCF_OVERFLOW_BIT) {
+		if (cmd->data_direction == DMA_TO_DEVICE) {
+			/* residual data from an overflow write */
+			srp_rsp->flags = SRP_RSP_FLAG_DOOVER;
+			srp_rsp->data_out_res_cnt = cpu_to_be32(resid);
+		} else if (cmd->data_direction == DMA_FROM_DEVICE) {
+			/* residual data from an overflow read */
+			srp_rsp->flags = SRP_RSP_FLAG_DIOVER;
+			srp_rsp->data_in_res_cnt = cpu_to_be32(resid);
+		}
+	}
+
 	if (sense_data_len) {
 		BUILD_BUG_ON(MIN_MAX_RSP_SIZE <= sizeof(*srp_rsp));
 		max_sense_len = ch->max_ti_iu_len - sizeof(*srp_rsp);

[PATCH 5.4 077/203] uaccess: Add non-pagefault user-space write function

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit 1d1585ca0f48fe7ed95c3571f3e4a82b2b5045dc upstream.

Commit 3d7081822f7f ("uaccess: Add non-pagefault user-space read functions")
missed to add probe write function, therefore factor out a probe_write_common()
helper with most logic of probe_kernel_write() except setting KERNEL_DS, and
add a new probe_user_write() helper so it can be used from BPF side.

Again, on some archs, the user address space and kernel address space can
co-exist and be overlapping, so in such case, setting KERNEL_DS would mean
that the given address is treated as being in kernel address space.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/9df2542e68141bfa3addde631441ee45503856a8.1572649915.git.daniel@iogearbox.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/uaccess.h |   12 ++++++++++++
 mm/maccess.c            |   45 +++++++++++++++++++++++++++++++++++++++++----
 2 files changed, 53 insertions(+), 4 deletions(-)

--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -337,6 +337,18 @@ extern long __probe_user_read(void *dst,
 extern long notrace probe_kernel_write(void *dst, const void *src, size_t size);
 extern long notrace __probe_kernel_write(void *dst, const void *src, size_t size);
 
+/*
+ * probe_user_write(): safely attempt to write to a location in user space
+ * @dst: address to write to
+ * @src: pointer to the data that shall be written
+ * @size: size of the data chunk
+ *
+ * Safely write to address @dst from the buffer at @src.  If a kernel fault
+ * happens, handle that and return -EFAULT.
+ */
+extern long notrace probe_user_write(void __user *dst, const void *src, size_t size);
+extern long notrace __probe_user_write(void __user *dst, const void *src, size_t size);
+
 extern long strncpy_from_unsafe(char *dst, const void *unsafe_addr, long count);
 extern long strncpy_from_unsafe_user(char *dst, const void __user *unsafe_addr,
 				     long count);
--- a/mm/maccess.c
+++ b/mm/maccess.c
@@ -18,6 +18,18 @@ probe_read_common(void *dst, const void
 	return ret ? -EFAULT : 0;
 }
 
+static __always_inline long
+probe_write_common(void __user *dst, const void *src, size_t size)
+{
+	long ret;
+
+	pagefault_disable();
+	ret = __copy_to_user_inatomic(dst, src, size);
+	pagefault_enable();
+
+	return ret ? -EFAULT : 0;
+}
+
 /**
  * probe_kernel_read(): safely attempt to read from a kernel-space location
  * @dst: pointer to the buffer that shall take the data
@@ -85,6 +97,7 @@ EXPORT_SYMBOL_GPL(probe_user_read);
  * Safely write to address @dst from the buffer at @src.  If a kernel fault
  * happens, handle that and return -EFAULT.
  */
+
 long __weak probe_kernel_write(void *dst, const void *src, size_t size)
     __attribute__((alias("__probe_kernel_write")));
 
@@ -94,15 +107,39 @@ long __probe_kernel_write(void *dst, con
 	mm_segment_t old_fs = get_fs();
 
 	set_fs(KERNEL_DS);
-	pagefault_disable();
-	ret = __copy_to_user_inatomic((__force void __user *)dst, src, size);
-	pagefault_enable();
+	ret = probe_write_common((__force void __user *)dst, src, size);
 	set_fs(old_fs);
 
-	return ret ? -EFAULT : 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(probe_kernel_write);
 
+/**
+ * probe_user_write(): safely attempt to write to a user-space location
+ * @dst: address to write to
+ * @src: pointer to the data that shall be written
+ * @size: size of the data chunk
+ *
+ * Safely write to address @dst from the buffer at @src.  If a kernel fault
+ * happens, handle that and return -EFAULT.
+ */
+
+long __weak probe_user_write(void __user *dst, const void *src, size_t size)
+    __attribute__((alias("__probe_user_write")));
+
+long __probe_user_write(void __user *dst, const void *src, size_t size)
+{
+	long ret = -EFAULT;
+	mm_segment_t old_fs = get_fs();
+
+	set_fs(USER_DS);
+	if (access_ok(dst, size))
+		ret = probe_write_common(dst, src, size);
+	set_fs(old_fs);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(probe_user_write);
 
 /**
  * strncpy_from_unsafe: - Copy a NUL terminated string from unsafe address.

[PATCH 5.4 078/203] bpf: Make use of probe_user_write in probe write helper

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit eb1b66887472eaa7342305b7890ae510dd9d1a79 upstream.

Convert the bpf_probe_write_user() helper to probe_user_write() such that
writes are not attempted under KERNEL_DS anymore which is buggy as kernel
and user space pointers can have overlapping addresses. Also, given we have
the access_ok() check inside probe_user_write(), the helper doesn't need
to do it twice.

Fixes: 96ae52279594 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/841c461781874c07a0ee404a454c3bc0459eed30.1572649915.git.daniel@iogearbox.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/bpf_trace.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -163,7 +163,7 @@ static const struct bpf_func_proto bpf_p
 	.arg3_type	= ARG_ANYTHING,
 };
 
-BPF_CALL_3(bpf_probe_write_user, void *, unsafe_ptr, const void *, src,
+BPF_CALL_3(bpf_probe_write_user, void __user *, unsafe_ptr, const void *, src,
 	   u32, size)
 {
 	/*
@@ -186,10 +186,8 @@ BPF_CALL_3(bpf_probe_write_user, void *,
 		return -EPERM;
 	if (unlikely(!nmi_uaccess_okay()))
 		return -EPERM;
-	if (!access_ok(unsafe_ptr, size))
-		return -EPERM;
 
-	return probe_kernel_write(unsafe_ptr, src, size);
+	return probe_user_write(unsafe_ptr, src, size);
 }
 
 static const struct bpf_func_proto bpf_probe_write_user_proto = {

[PATCH 5.4 079/203] bpf: skmsg, fix potential psock NULL pointer dereference

[Greg Kroah-Hartman]

From: John Fastabend <john.fastabend@gmail.com>

commit 8163999db445021f2651a8a47b5632483e8722ea upstream.

Report from Dan Carpenter,

 net/core/skmsg.c:792 sk_psock_write_space()
 error: we previously assumed 'psock' could be null (see line 790)

 net/core/skmsg.c
   789 psock = sk_psock(sk);
   790 if (likely(psock && sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED)))
 Check for NULL
   791 schedule_work(&psock->work);
   792 write_space = psock->saved_write_space;
                     ^^^^^^^^^^^^^^^^^^^^^^^^
   793          rcu_read_unlock();
   794          write_space(sk);

Ensure psock dereference on line 792 only occurs if psock is not null.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/skmsg.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -793,15 +793,18 @@ static void sk_psock_strp_data_ready(str
 static void sk_psock_write_space(struct sock *sk)
 {
 	struct sk_psock *psock;
-	void (*write_space)(struct sock *sk);
+	void (*write_space)(struct sock *sk) = NULL;
 
 	rcu_read_lock();
 	psock = sk_psock(sk);
-	if (likely(psock && sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED)))
-		schedule_work(&psock->work);
-	write_space = psock->saved_write_space;
+	if (likely(psock)) {
+		if (sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED))
+			schedule_work(&psock->work);
+		write_space = psock->saved_write_space;
+	}
 	rcu_read_unlock();
-	write_space(sk);
+	if (write_space)
+		write_space(sk);
 }
 
 int sk_psock_init_strp(struct sock *sk, struct sk_psock *psock)

[PATCH 5.4 080/203] bpf: Support pre-2.25-binutils objcopy for vmlinux BTF

[Greg Kroah-Hartman]

From: Stanislav Fomichev <sdf@google.com>

commit da5fb18225b49b97bb37c51bcbbb2990a507c364 upstream.

If vmlinux BTF generation fails, but CONFIG_DEBUG_INFO_BTF is set,
.BTF section of vmlinux is empty and kernel will prohibit
BPF loading and return "in-kernel BTF is malformed".

--dump-section argument to binutils' objcopy was added in version 2.25.
When using pre-2.25 binutils, BTF generation silently fails. Convert
to --only-section which is present on pre-2.25 binutils.

Documentation/process/changes.rst states that binutils 2.21+
is supported, not sure those standards apply to BPF subsystem.

v2:
* exit and print an error if gen_btf fails (John Fastabend)

v3:
* resend with Andrii's Acked-by/Tested-by tags

Fixes: 341dfcf8d78ea ("btf: expose BTF info through sysfs")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191127161410.57327-1-sdf@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 scripts/link-vmlinux.sh |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -127,7 +127,8 @@ gen_btf()
 		cut -d, -f1 | cut -d' ' -f2)
 	bin_format=$(LANG=C ${OBJDUMP} -f ${1} | grep 'file format' | \
 		awk '{print $4}')
-	${OBJCOPY} --dump-section .BTF=.btf.vmlinux.bin ${1} 2>/dev/null
+	${OBJCOPY} --set-section-flags .BTF=alloc -O binary \
+		--only-section=.BTF ${1} .btf.vmlinux.bin 2>/dev/null
 	${OBJCOPY} -I binary -O ${bin_format} -B ${bin_arch} \
 		--rename-section .data=.BTF .btf.vmlinux.bin ${2}
 }
@@ -253,6 +254,10 @@ btf_vmlinux_bin_o=""
 if [ -n "${CONFIG_DEBUG_INFO_BTF}" ]; then
 	if gen_btf .tmp_vmlinux.btf .btf.vmlinux.bin.o ; then
 		btf_vmlinux_bin_o=.btf.vmlinux.bin.o
+	else
+		echo >&2 "Failed to generate BTF for vmlinux"
+		echo >&2 "Try to disable CONFIG_DEBUG_INFO_BTF"
+		exit 1
 	fi
 fi
 

[PATCH 5.4 081/203] libbpf: Fix Makefile libbpf symbol mismatch diagnostic

[Greg Kroah-Hartman]

From: Andrii Nakryiko <andriin@fb.com>

commit b568405856906ee4d9ba6284fd36f2928653a623 upstream.

Fix Makefile's diagnostic diff output when there is LIBBPF_API-versioned
symbols mismatch.

Fixes: 1bd63524593b ("libbpf: handle symbol versioning properly for libbpf.a")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191127200134.1360660-1-andriin@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/lib/bpf/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/lib/bpf/Makefile
+++ b/tools/lib/bpf/Makefile
@@ -215,7 +215,7 @@ check_abi: $(OUTPUT)libbpf.so
 		     "versioned symbols in $^ ($(VERSIONED_SYM_COUNT))." \
 		     "Please make sure all LIBBPF_API symbols are"	 \
 		     "versioned in $(VERSION_SCRIPT)." >&2;		 \
-		readelf -s --wide $(OUTPUT)libbpf-in.o |		 \
+		readelf -s --wide $(BPF_IN_SHARED) |			 \
 		    cut -d "@" -f1 | sed 's/_v[0-9]_[0-9]_[0-9].*//' |	 \
 		    awk '/GLOBAL/ && /DEFAULT/ && !/UND/ {print $$8}'|   \
 		    sort -u > $(OUTPUT)libbpf_global_syms.tmp;		 \

[PATCH 5.4 082/203] afs: Fix use-after-loss-of-ref

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 40a708bd622b78582ae3d280de29b09b50bd04c0 upstream.

afs_lookup() has a tracepoint to indicate the outcome of
d_splice_alias(), passing it the inode to retrieve the fid from.
However, the function gave up its ref on that inode when it called
d_splice_alias(), which may have failed and dropped the inode.

Fix this by caching the fid.

Fixes: 80548b03991f ("afs: Add more tracepoints")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/afs/dir.c               |   12 +++++++-----
 include/trace/events/afs.h |   12 +++---------
 2 files changed, 10 insertions(+), 14 deletions(-)

--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -908,6 +908,7 @@ static struct dentry *afs_lookup(struct
 				 unsigned int flags)
 {
 	struct afs_vnode *dvnode = AFS_FS_I(dir);
+	struct afs_fid fid = {};
 	struct inode *inode;
 	struct dentry *d;
 	struct key *key;
@@ -957,15 +958,16 @@ static struct dentry *afs_lookup(struct
 		dentry->d_fsdata =
 			(void *)(unsigned long)dvnode->status.data_version;
 	}
+
+	if (!IS_ERR_OR_NULL(inode))
+		fid = AFS_FS_I(inode)->fid;
+
 	d = d_splice_alias(inode, dentry);
 	if (!IS_ERR_OR_NULL(d)) {
 		d->d_fsdata = dentry->d_fsdata;
-		trace_afs_lookup(dvnode, &d->d_name,
-				 inode ? AFS_FS_I(inode) : NULL);
+		trace_afs_lookup(dvnode, &d->d_name, &fid);
 	} else {
-		trace_afs_lookup(dvnode, &dentry->d_name,
-				 IS_ERR_OR_NULL(inode) ? NULL
-				 : AFS_FS_I(inode));
+		trace_afs_lookup(dvnode, &dentry->d_name, &fid);
 	}
 	return d;
 }
--- a/include/trace/events/afs.h
+++ b/include/trace/events/afs.h
@@ -915,9 +915,9 @@ TRACE_EVENT(afs_call_state,
 
 TRACE_EVENT(afs_lookup,
 	    TP_PROTO(struct afs_vnode *dvnode, const struct qstr *name,
-		     struct afs_vnode *vnode),
+		     struct afs_fid *fid),
 
-	    TP_ARGS(dvnode, name, vnode),
+	    TP_ARGS(dvnode, name, fid),
 
 	    TP_STRUCT__entry(
 		    __field_struct(struct afs_fid,	dfid		)
@@ -928,13 +928,7 @@ TRACE_EVENT(afs_lookup,
 	    TP_fast_assign(
 		    int __len = min_t(int, name->len, 23);
 		    __entry->dfid = dvnode->fid;
-		    if (vnode) {
-			    __entry->fid = vnode->fid;
-		    } else {
-			    __entry->fid.vid = 0;
-			    __entry->fid.vnode = 0;
-			    __entry->fid.unique = 0;
-		    }
+		    __entry->fid = *fid;
 		    memcpy(__entry->name, name->name, __len);
 		    __entry->name[__len] = 0;
 			   ),

[PATCH 5.4 083/203] afs: Fix afs_lookup() to not clobber the version on a new dentry

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit f52b83b0b1c40ada38df917973ab719a4a753951 upstream.

Fix afs_lookup() to not clobber the version set on a new dentry by
afs_do_lookup() - especially as it's using the wrong version of the
version (we need to use the one given to us by whatever op the dir
contents correspond to rather than what's in the afs_vnode).

Fixes: 9dd0b82ef530 ("afs: Fix missing dentry data version updating")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/afs/dir.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -952,12 +952,8 @@ static struct dentry *afs_lookup(struct
 	afs_stat_v(dvnode, n_lookup);
 	inode = afs_do_lookup(dir, dentry, key);
 	key_put(key);
-	if (inode == ERR_PTR(-ENOENT)) {
+	if (inode == ERR_PTR(-ENOENT))
 		inode = afs_try_auto_mntpt(dentry, dir);
-	} else {
-		dentry->d_fsdata =
-			(void *)(unsigned long)dvnode->status.data_version;
-	}
 
 	if (!IS_ERR_OR_NULL(inode))
 		fid = AFS_FS_I(inode)->fid;

[PATCH 5.4 084/203] keys: Fix request_key() cache

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

commit 8379bb84be757d5df2d818509faec5d66adb861d upstream.

When the key cached by request_key() and co.  is cleaned up on exit(),
the code looks in the wrong task_struct, and so clears the wrong cache.
This leads to anomalies in key refcounting when doing, say, a kernel
build on an afs volume, that then trigger kasan to report a
use-after-free when the key is viewed in /proc/keys.

Fix this by making exit_creds() look in the passed-in task_struct rather
than in current (the task_struct cleanup code is deferred by RCU and
potentially run in another task).

Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/cred.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -175,8 +175,8 @@ void exit_creds(struct task_struct *tsk)
 	put_cred(cred);
 
 #ifdef CONFIG_KEYS_REQUEST_CACHE
-	key_put(current->cached_requested_key);
-	current->cached_requested_key = NULL;
+	key_put(tsk->cached_requested_key);
+	tsk->cached_requested_key = NULL;
 #endif
 }
 

[PATCH 5.4 085/203] scsi: enclosure: Fix stale device oops with hot replug

[Greg Kroah-Hartman]

From: James Bottomley <James.Bottomley@HansenPartnership.com>

commit 529244bd1afc102ab164429d338d310d5d65e60d upstream.

Doing an add/remove/add on a SCSI device in an enclosure leads to an oops
caused by poisoned values in the enclosure device list pointers.  The
reason is because we are keeping the enclosure device across the enclosed
device add/remove/add but the current code is doing a
device_add/device_del/device_add on it.  This is the wrong thing to do in
sysfs, so fix it by not doing a device_del on the enclosure device simply
because of a hot remove of the drive in the slot.

[mkp: added missing email addresses]

Fixes: 43d8eb9cfd0a ("[SCSI] ses: add support for enclosure component hot removal")
Link: https://lore.kernel.org/r/1578532892.3852.10.camel@HansenPartnership.com
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Luo Jiaxing <luojiaxing@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/enclosure.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -406,10 +406,9 @@ int enclosure_remove_device(struct enclo
 		cdev = &edev->component[i];
 		if (cdev->dev == dev) {
 			enclosure_remove_links(cdev);
-			device_del(&cdev->cdev);
 			put_device(dev);
 			cdev->dev = NULL;
-			return device_add(&cdev->cdev);
+			return 0;
 		}
 	}
 	return -ENODEV;

[PATCH 5.4 086/203] scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI

[Greg Kroah-Hartman]

From: Xiang Chen <chenxiang66@hisilicon.com>

commit 465f4edaecc6c37f81349233e84d46246bcac11a upstream.

If an attached disk with protection information enabled is reformatted
to Type 0 the revalidation code does not clear the original protection
type and subsequent accesses will keep setting RDPROTECT/WRPROTECT.

Set the protection type to 0 if the disk reports PROT_EN=0 in READ
CAPACITY(16).

[mkp: commit desc]

Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type")
Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sd.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2192,8 +2192,10 @@ static int sd_read_protection_type(struc
 	u8 type;
 	int ret = 0;
 
-	if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
+	if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0) {
+		sdkp->protection_type = 0;
 		return ret;
+	}
 
 	type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
 

[PATCH 5.4 087/203] platform/mellanox: fix potential deadlock in the tmfifo driver

[Greg Kroah-Hartman]

From: Liming Sun <lsun@mellanox.com>

commit 638bc4ca3d28c25986cce4cbad69d9b8abf1e434 upstream.

This commit fixes the potential deadlock caused by the console Rx
and Tx processing at the same time. Rx and Tx both take the console
and tmfifo spinlock but in different order which causes potential
deadlock. The fix is to use different tmfifo spinlock for Rx and
Tx since they protect different resources and it's safe to split
the lock.

Below is the reported call trace when copying/pasting large string
in the console.

Rx:
    _raw_spin_lock_irqsave (hvc lock)
    __hvc_poll
    hvc_poll
    in_intr
    vring_interrupt
    mlxbf_tmfifo_rxtx_one_desc (tmfifo lock)
    mlxbf_tmfifo_rxtx
    mlxbf_tmfifo_work_rxtx
Tx:
    _raw_spin_lock_irqsave (tmfifo lock)
    mlxbf_tmfifo_virtio_notify
    virtqueue_notify
    virtqueue_kick
    put_chars
    hvc_push
    hvc_write (hvc lock)
    ...
    do_tty_write
    tty_write

Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Cc: <stable@vger.kernel.org> # 5.4+
Reviewed-by: David Woods <dwoods@mellanox.com>
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/mellanox/mlxbf-tmfifo.c |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

--- a/drivers/platform/mellanox/mlxbf-tmfifo.c
+++ b/drivers/platform/mellanox/mlxbf-tmfifo.c
@@ -149,7 +149,7 @@ struct mlxbf_tmfifo_irq_info {
  * @work: work struct for deferred process
  * @timer: background timer
  * @vring: Tx/Rx ring
- * @spin_lock: spin lock
+ * @spin_lock: Tx/Rx spin lock
  * @is_ready: ready flag
  */
 struct mlxbf_tmfifo {
@@ -164,7 +164,7 @@ struct mlxbf_tmfifo {
 	struct work_struct work;
 	struct timer_list timer;
 	struct mlxbf_tmfifo_vring *vring[2];
-	spinlock_t spin_lock;		/* spin lock */
+	spinlock_t spin_lock[2];	/* spin lock */
 	bool is_ready;
 };
 
@@ -525,7 +525,7 @@ static void mlxbf_tmfifo_console_tx(stru
 	writeq(*(u64 *)&hdr, fifo->tx_base + MLXBF_TMFIFO_TX_DATA);
 
 	/* Use spin-lock to protect the 'cons->tx_buf'. */
-	spin_lock_irqsave(&fifo->spin_lock, flags);
+	spin_lock_irqsave(&fifo->spin_lock[0], flags);
 
 	while (size > 0) {
 		addr = cons->tx_buf.buf + cons->tx_buf.tail;
@@ -552,7 +552,7 @@ static void mlxbf_tmfifo_console_tx(stru
 		}
 	}
 
-	spin_unlock_irqrestore(&fifo->spin_lock, flags);
+	spin_unlock_irqrestore(&fifo->spin_lock[0], flags);
 }
 
 /* Rx/Tx one word in the descriptor buffer. */
@@ -731,9 +731,9 @@ static bool mlxbf_tmfifo_rxtx_one_desc(s
 		fifo->vring[is_rx] = NULL;
 
 		/* Notify upper layer that packet is done. */
-		spin_lock_irqsave(&fifo->spin_lock, flags);
+		spin_lock_irqsave(&fifo->spin_lock[is_rx], flags);
 		vring_interrupt(0, vring->vq);
-		spin_unlock_irqrestore(&fifo->spin_lock, flags);
+		spin_unlock_irqrestore(&fifo->spin_lock[is_rx], flags);
 	}
 
 mlxbf_tmfifo_desc_done:
@@ -852,10 +852,10 @@ static bool mlxbf_tmfifo_virtio_notify(s
 		 * worker handler.
 		 */
 		if (vring->vdev_id == VIRTIO_ID_CONSOLE) {
-			spin_lock_irqsave(&fifo->spin_lock, flags);
+			spin_lock_irqsave(&fifo->spin_lock[0], flags);
 			tm_vdev = fifo->vdev[VIRTIO_ID_CONSOLE];
 			mlxbf_tmfifo_console_output(tm_vdev, vring);
-			spin_unlock_irqrestore(&fifo->spin_lock, flags);
+			spin_unlock_irqrestore(&fifo->spin_lock[0], flags);
 		} else if (test_and_set_bit(MLXBF_TM_TX_LWM_IRQ,
 					    &fifo->pend_events)) {
 			return true;
@@ -1189,7 +1189,8 @@ static int mlxbf_tmfifo_probe(struct pla
 	if (!fifo)
 		return -ENOMEM;
 
-	spin_lock_init(&fifo->spin_lock);
+	spin_lock_init(&fifo->spin_lock[0]);
+	spin_lock_init(&fifo->spin_lock[1]);
 	INIT_WORK(&fifo->work, mlxbf_tmfifo_work_handler);
 	mutex_init(&fifo->lock);
 

[PATCH 5.4 088/203] platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0

[Greg Kroah-Hartman]

From: Jian-Hong Pan <jian-hong@endlessm.com>

commit 176a7fca81c5090a7240664e3002c106d296bf31 upstream.

Some of ASUS laptops like UX431FL keyboard backlight cannot be set to
brightness 0. According to ASUS' information, the brightness should be
0x80 ~ 0x83. This patch fixes it by following the logic.

Fixes: e9809c0b9670 ("asus-wmi: add keyboard backlight support")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/asus-wmi.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -512,13 +512,7 @@ static void kbd_led_update(struct asus_w
 {
 	int ctrl_param = 0;
 
-	/*
-	 * bits 0-2: level
-	 * bit 7: light on/off
-	 */
-	if (asus->kbd_led_wk > 0)
-		ctrl_param = 0x80 | (asus->kbd_led_wk & 0x7F);
-
+	ctrl_param = 0x80 | (asus->kbd_led_wk & 0x7F);
 	asus_wmi_set_devstate(ASUS_WMI_DEVID_KBD_BACKLIGHT, ctrl_param, NULL);
 }
 

[PATCH 5.4 089/203] platform/x86: GPD pocket fan: Use default values when wrong modparams are given

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit 6ae01050e49f0080ae30575d9b45a6d4a3d7ee23 upstream.

Use our default values when wrong module-parameters are given, instead of
refusing to load. Refusing to load leaves the fan at the BIOS default
setting, which is "Off". The CPU's thermal throttling should protect the
system from damage, but not-loading is really not the best fallback in this
case.

This commit fixes this by re-setting module-parameter values to their
defaults if they are out of range, instead of failing the probe with
-EINVAL.

Cc: stable@vger.kernel.org
Cc: Jason Anderson <jasona.594@gmail.com>
Reported-by: Jason Anderson <jasona.594@gmail.com>
Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/x86/gpd-pocket-fan.c |   25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

--- a/drivers/platform/x86/gpd-pocket-fan.c
+++ b/drivers/platform/x86/gpd-pocket-fan.c
@@ -16,17 +16,27 @@
 
 #define MAX_SPEED 3
 
-static int temp_limits[3] = { 55000, 60000, 65000 };
+#define TEMP_LIMIT0_DEFAULT	55000
+#define TEMP_LIMIT1_DEFAULT	60000
+#define TEMP_LIMIT2_DEFAULT	65000
+
+#define HYSTERESIS_DEFAULT	3000
+
+#define SPEED_ON_AC_DEFAULT	2
+
+static int temp_limits[3] = {
+	TEMP_LIMIT0_DEFAULT, TEMP_LIMIT1_DEFAULT, TEMP_LIMIT2_DEFAULT,
+};
 module_param_array(temp_limits, int, NULL, 0444);
 MODULE_PARM_DESC(temp_limits,
 		 "Millicelsius values above which the fan speed increases");
 
-static int hysteresis = 3000;
+static int hysteresis = HYSTERESIS_DEFAULT;
 module_param(hysteresis, int, 0444);
 MODULE_PARM_DESC(hysteresis,
 		 "Hysteresis in millicelsius before lowering the fan speed");
 
-static int speed_on_ac = 2;
+static int speed_on_ac = SPEED_ON_AC_DEFAULT;
 module_param(speed_on_ac, int, 0444);
 MODULE_PARM_DESC(speed_on_ac,
 		 "minimum fan speed to allow when system is powered by AC");
@@ -120,18 +130,21 @@ static int gpd_pocket_fan_probe(struct p
 		if (temp_limits[i] < 40000 || temp_limits[i] > 70000) {
 			dev_err(&pdev->dev, "Invalid temp-limit %d (must be between 40000 and 70000)\n",
 				temp_limits[i]);
-			return -EINVAL;
+			temp_limits[0] = TEMP_LIMIT0_DEFAULT;
+			temp_limits[1] = TEMP_LIMIT1_DEFAULT;
+			temp_limits[2] = TEMP_LIMIT2_DEFAULT;
+			break;
 		}
 	}
 	if (hysteresis < 1000 || hysteresis > 10000) {
 		dev_err(&pdev->dev, "Invalid hysteresis %d (must be between 1000 and 10000)\n",
 			hysteresis);
-		return -EINVAL;
+		hysteresis = HYSTERESIS_DEFAULT;
 	}
 	if (speed_on_ac < 0 || speed_on_ac > MAX_SPEED) {
 		dev_err(&pdev->dev, "Invalid speed_on_ac %d (must be between 0 and 3)\n",
 			speed_on_ac);
-		return -EINVAL;
+		speed_on_ac = SPEED_ON_AC_DEFAULT;
 	}
 
 	fan = devm_kzalloc(&pdev->dev, sizeof(*fan), GFP_KERNEL);

[PATCH 5.4 090/203] asm-generic/nds32: dont redefine cacheflush primitives

[Greg Kroah-Hartman]

From: Mike Rapoport <rppt@linux.ibm.com>

commit 4f0bd808134d73184054ad09173821c84f31dd5d upstream.

The commit c296d4dc13ae ("asm-generic: fix a compilation warning") changed
asm-generic/cachflush.h to use static inlines instead of macros and as a
result the nds32 build with CONFIG_CPU_CACHE_ALIASING=n fails:

  CC      init/main.o
In file included from arch/nds32/include/asm/cacheflush.h:43,
                 from include/linux/highmem.h:12,
                 from include/linux/pagemap.h:11,
                 from include/linux/blkdev.h:16,
                 from include/linux/blk-cgroup.h:23,
                 from include/linux/writeback.h:14,
                 from init/main.c:44:
include/asm-generic/cacheflush.h:50:20: error: static declaration of 'flush_icache_range' follows non-static declaration
 static inline void flush_icache_range(unsigned long start, unsigned long end)
                    ^~~~~~~~~~~~~~~~~~
In file included from include/linux/highmem.h:12,
                 from include/linux/pagemap.h:11,
                 from include/linux/blkdev.h:16,
                 from include/linux/blk-cgroup.h:23,
                 from include/linux/writeback.h:14,
                 from init/main.c:44:
arch/nds32/include/asm/cacheflush.h:11:6: note: previous declaration of 'flush_icache_range' was here
 void flush_icache_range(unsigned long start, unsigned long end);
      ^~~~~~~~~~~~~~~~~~

Surround the inline functions in asm-generic/cacheflush.h by ifdef's so
that architectures could override them and add the required overrides to
nds32.

Fixes: c296d4dc13ae ("asm-generic: fix a compilation warning")
Link: https://lore.kernel.org/lkml/201912212139.yptX8CsV%25lkp@intel.com/
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/nds32/include/asm/cacheflush.h |   11 +++++++----
 include/asm-generic/cacheflush.h    |   33 ++++++++++++++++++++++++++++++++-
 2 files changed, 39 insertions(+), 5 deletions(-)

--- a/arch/nds32/include/asm/cacheflush.h
+++ b/arch/nds32/include/asm/cacheflush.h
@@ -9,7 +9,11 @@
 #define PG_dcache_dirty PG_arch_1
 
 void flush_icache_range(unsigned long start, unsigned long end);
+#define flush_icache_range flush_icache_range
+
 void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+#define flush_icache_page flush_icache_page
+
 #ifdef CONFIG_CPU_CACHE_ALIASING
 void flush_cache_mm(struct mm_struct *mm);
 void flush_cache_dup_mm(struct mm_struct *mm);
@@ -40,12 +44,11 @@ void invalidate_kernel_vmap_range(void *
 #define flush_dcache_mmap_unlock(mapping) xa_unlock_irq(&(mapping)->i_pages)
 
 #else
-#include <asm-generic/cacheflush.h>
-#undef flush_icache_range
-#undef flush_icache_page
-#undef flush_icache_user_range
 void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
 	                     unsigned long addr, int len);
+#define flush_icache_user_range flush_icache_user_range
+
+#include <asm-generic/cacheflush.h>
 #endif
 
 #endif /* __NDS32_CACHEFLUSH_H__ */
--- a/include/asm-generic/cacheflush.h
+++ b/include/asm-generic/cacheflush.h
@@ -11,71 +11,102 @@
  * The cache doesn't need to be flushed when TLB entries change when
  * the cache is mapped to physical memory, not virtual memory
  */
+#ifndef flush_cache_all
 static inline void flush_cache_all(void)
 {
 }
+#endif
 
+#ifndef flush_cache_mm
 static inline void flush_cache_mm(struct mm_struct *mm)
 {
 }
+#endif
 
+#ifndef flush_cache_dup_mm
 static inline void flush_cache_dup_mm(struct mm_struct *mm)
 {
 }
+#endif
 
+#ifndef flush_cache_range
 static inline void flush_cache_range(struct vm_area_struct *vma,
 				     unsigned long start,
 				     unsigned long end)
 {
 }
+#endif
 
+#ifndef flush_cache_page
 static inline void flush_cache_page(struct vm_area_struct *vma,
 				    unsigned long vmaddr,
 				    unsigned long pfn)
 {
 }
+#endif
 
+#ifndef flush_dcache_page
 static inline void flush_dcache_page(struct page *page)
 {
 }
+#endif
 
+#ifndef flush_dcache_mmap_lock
 static inline void flush_dcache_mmap_lock(struct address_space *mapping)
 {
 }
+#endif
 
+#ifndef flush_dcache_mmap_unlock
 static inline void flush_dcache_mmap_unlock(struct address_space *mapping)
 {
 }
+#endif
 
+#ifndef flush_icache_range
 static inline void flush_icache_range(unsigned long start, unsigned long end)
 {
 }
+#endif
 
+#ifndef flush_icache_page
 static inline void flush_icache_page(struct vm_area_struct *vma,
 				     struct page *page)
 {
 }
+#endif
 
+#ifndef flush_icache_user_range
 static inline void flush_icache_user_range(struct vm_area_struct *vma,
 					   struct page *page,
 					   unsigned long addr, int len)
 {
 }
+#endif
 
+#ifndef flush_cache_vmap
 static inline void flush_cache_vmap(unsigned long start, unsigned long end)
 {
 }
+#endif
 
+#ifndef flush_cache_vunmap
 static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
 {
 }
+#endif
 
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+#ifndef copy_to_user_page
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
 	do { \
 		memcpy(dst, src, len); \
 		flush_icache_user_range(vma, page, vaddr, len); \
 	} while (0)
+#endif
+
+#ifndef copy_from_user_page
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
 	memcpy(dst, src, len)
+#endif
 
 #endif /* __ASM_CACHEFLUSH_H */

[PATCH 5.4 091/203] Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces

[Greg Kroah-Hartman]

From: Vadim Pasternak <vadimp@mellanox.com>

commit f4094826779dcafe7087e80850513b923eeefdeb upstream.

Fix attribute name from "jtag_enable", which described twice to
"cpld3_version", which is expected to be instead of second appearance
of "jtag_enable".

Fixes: 2752e34442b5 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/ABI/stable/sysfs-driver-mlxreg-io |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -29,13 +29,13 @@ Description:	This file shows the system
 
 		The files are read only.
 
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
 
 Date:		November 2018
 KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
-		on LED board.
+		on LED or Gearbox board.
 
 		The files are read only.
 

[PATCH 5.4 092/203] Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces

[Greg Kroah-Hartman]

From: Vadim Pasternak <vadimp@mellanox.com>

commit f3efc406d67e6236b513c4302133b0c9be74fd99 upstream.

Add missed "cpld4_version" attribute.

Fixes: 52675da1d087 ("Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/ABI/stable/sysfs-driver-mlxreg-io |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -121,6 +121,15 @@ Description:	These files show the system
 
 		The files are read only.
 
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
+Date:		November 2018
+KernelVersion:	5.0
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD versions have been burned
+		on LED board.
+
+		The files are read only.
+
 Date:		June 2019
 KernelVersion:	5.3
 Contact:	Vadim Pasternak <vadimpmellanox.com>

[PATCH 5.4 093/203] xprtrdma: Fix create_qp crash on device unload

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit b32b9ed493f938e191f790a0991d20b18b38c35b upstream.

On device re-insertion, the RDMA device driver crashes trying to set
up a new QP:

Nov 27 16:32:06 manet kernel: BUG: kernel NULL pointer dereference, address: 00000000000001c0
Nov 27 16:32:06 manet kernel: #PF: supervisor write access in kernel mode
Nov 27 16:32:06 manet kernel: #PF: error_code(0x0002) - not-present page
Nov 27 16:32:06 manet kernel: PGD 0 P4D 0
Nov 27 16:32:06 manet kernel: Oops: 0002 [#1] SMP
Nov 27 16:32:06 manet kernel: CPU: 1 PID: 345 Comm: kworker/u28:0 Tainted: G        W         5.4.0 #852
Nov 27 16:32:06 manet kernel: Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015
Nov 27 16:32:06 manet kernel: Workqueue: xprtiod xprt_rdma_connect_worker [rpcrdma]
Nov 27 16:32:06 manet kernel: RIP: 0010:atomic_try_cmpxchg+0x2/0x12
Nov 27 16:32:06 manet kernel: Code: ff ff 48 8b 04 24 5a c3 c6 07 00 0f 1f 40 00 c3 31 c0 48 81 ff 08 09 68 81 72 0c 31 c0 48 81 ff 83 0c 68 81 0f 92 c0 c3 8b 06 <f0> 0f b1 17 0f 94 c2 84 d2 75 02 89 06 88 d0 c3 53 ba 01 00 00 00
Nov 27 16:32:06 manet kernel: RSP: 0018:ffffc900035abbf0 EFLAGS: 00010046
Nov 27 16:32:06 manet kernel: RAX: 0000000000000000 RBX: 00000000000001c0 RCX: 0000000000000000
Nov 27 16:32:06 manet kernel: RDX: 0000000000000001 RSI: ffffc900035abbfc RDI: 00000000000001c0
Nov 27 16:32:06 manet kernel: RBP: ffffc900035abde0 R08: 000000000000000e R09: ffffffffffffc000
Nov 27 16:32:06 manet kernel: R10: 0000000000000000 R11: 000000000002e800 R12: ffff88886169d9f8
Nov 27 16:32:06 manet kernel: R13: ffff88886169d9f4 R14: 0000000000000246 R15: 0000000000000000
Nov 27 16:32:06 manet kernel: FS:  0000000000000000(0000) GS:ffff88846fa40000(0000) knlGS:0000000000000000
Nov 27 16:32:06 manet kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Nov 27 16:32:06 manet kernel: CR2: 00000000000001c0 CR3: 0000000002009006 CR4: 00000000001606e0
Nov 27 16:32:06 manet kernel: Call Trace:
Nov 27 16:32:06 manet kernel: do_raw_spin_lock+0x2f/0x5a
Nov 27 16:32:06 manet kernel: create_qp_common.isra.47+0x856/0xadf [mlx4_ib]
Nov 27 16:32:06 manet kernel: ? slab_post_alloc_hook.isra.60+0xa/0x1a
Nov 27 16:32:06 manet kernel: ? __kmalloc+0x125/0x139
Nov 27 16:32:06 manet kernel: mlx4_ib_create_qp+0x57f/0x972 [mlx4_ib]

The fix is to copy the qp_init_attr struct that was just created by
rpcrdma_ep_create() instead of using the one from the previous
connection instance.

Fixes: 98ef77d1aaa7 ("xprtrdma: Send Queue size grows after a reconnect")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/xprtrdma/verbs.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -607,6 +607,7 @@ static int rpcrdma_ep_recreate_xprt(stru
 				    struct ib_qp_init_attr *qp_init_attr)
 {
 	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
+	struct rpcrdma_ep *ep = &r_xprt->rx_ep;
 	int rc, err;
 
 	trace_xprtrdma_reinsert(r_xprt);
@@ -621,6 +622,7 @@ static int rpcrdma_ep_recreate_xprt(stru
 		pr_err("rpcrdma: rpcrdma_ep_create returned %d\n", err);
 		goto out2;
 	}
+	memcpy(qp_init_attr, &ep->rep_attr, sizeof(*qp_init_attr));
 
 	rc = -ENETUNREACH;
 	err = rdma_create_qp(ia->ri_id, ia->ri_pd, qp_init_attr);

[PATCH 5.4 094/203] xprtrdma: Fix completion wait during device removal

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit 13cb886c591f341a8759f175292ddf978ef903a1 upstream.

I've found that on occasion, "rmmod <dev>" will hang while if an NFS
is under load.

Ensure that ri_remove_done is initialized only just before the
transport is woken up to force a close. This avoids the completion
possibly getting initialized again while the CM event handler is
waiting for a wake-up.

Fixes: bebd031866ca ("xprtrdma: Support unplugging an HCA from under an NFS mount")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/xprtrdma/verbs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -245,6 +245,7 @@ rpcrdma_cm_event_handler(struct rdma_cm_
 			ia->ri_id->device->name,
 			rpcrdma_addrstr(r_xprt), rpcrdma_portstr(r_xprt));
 #endif
+		init_completion(&ia->ri_remove_done);
 		set_bit(RPCRDMA_IAF_REMOVING, &ia->ri_flags);
 		ep->rep_connected = -ENODEV;
 		xprt_force_disconnect(xprt);
@@ -299,7 +300,6 @@ rpcrdma_create_id(struct rpcrdma_xprt *x
 	trace_xprtrdma_conn_start(xprt);
 
 	init_completion(&ia->ri_done);
-	init_completion(&ia->ri_remove_done);
 
 	id = rdma_create_id(xprt->rx_xprt.xprt_net, rpcrdma_cm_event_handler,
 			    xprt, RDMA_PS_TCP, IB_QPT_RC);

[PATCH 5.4 095/203] xprtrdma: Fix oops in Receive handler after device removal

[Greg Kroah-Hartman]

From: Chuck Lever <chuck.lever@oracle.com>

commit 671c450b6fe0680ea1cb1cf1526d764fdd5a3d3f upstream.

Since v5.4, a device removal occasionally triggered this oops:

Dec  2 17:13:53 manet kernel: BUG: unable to handle page fault for address: 0000000c00000219
Dec  2 17:13:53 manet kernel: #PF: supervisor read access in kernel mode
Dec  2 17:13:53 manet kernel: #PF: error_code(0x0000) - not-present page
Dec  2 17:13:53 manet kernel: PGD 0 P4D 0
Dec  2 17:13:53 manet kernel: Oops: 0000 [#1] SMP
Dec  2 17:13:53 manet kernel: CPU: 2 PID: 468 Comm: kworker/2:1H Tainted: G        W         5.4.0-00050-g53717e43af61 #883
Dec  2 17:13:53 manet kernel: Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015
Dec  2 17:13:53 manet kernel: Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
Dec  2 17:13:53 manet kernel: RIP: 0010:rpcrdma_wc_receive+0x7c/0xf6 [rpcrdma]
Dec  2 17:13:53 manet kernel: Code: 6d 8b 43 14 89 c1 89 45 78 48 89 4d 40 8b 43 2c 89 45 14 8b 43 20 89 45 18 48 8b 45 20 8b 53 14 48 8b 30 48 8b 40 10 48 8b 38 <48> 8b 87 18 02 00 00 48 85 c0 75 18 48 8b 05 1e 24 c4 e1 48 85 c0
Dec  2 17:13:53 manet kernel: RSP: 0018:ffffc900035dfe00 EFLAGS: 00010246
Dec  2 17:13:53 manet kernel: RAX: ffff888467290000 RBX: ffff88846c638400 RCX: 0000000000000048
Dec  2 17:13:53 manet kernel: RDX: 0000000000000048 RSI: 00000000f942e000 RDI: 0000000c00000001
Dec  2 17:13:53 manet kernel: RBP: ffff888467611b00 R08: ffff888464e4a3c4 R09: 0000000000000000
Dec  2 17:13:53 manet kernel: R10: ffffc900035dfc88 R11: fefefefefefefeff R12: ffff888865af4428
Dec  2 17:13:53 manet kernel: R13: ffff888466023000 R14: ffff88846c63f000 R15: 0000000000000010
Dec  2 17:13:53 manet kernel: FS:  0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000
Dec  2 17:13:53 manet kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Dec  2 17:13:53 manet kernel: CR2: 0000000c00000219 CR3: 0000000002009002 CR4: 00000000001606e0
Dec  2 17:13:53 manet kernel: Call Trace:
Dec  2 17:13:53 manet kernel: __ib_process_cq+0x5c/0x14e [ib_core]
Dec  2 17:13:53 manet kernel: ib_cq_poll_work+0x26/0x70 [ib_core]
Dec  2 17:13:53 manet kernel: process_one_work+0x19d/0x2cd
Dec  2 17:13:53 manet kernel: ? cancel_delayed_work_sync+0xf/0xf
Dec  2 17:13:53 manet kernel: worker_thread+0x1a6/0x25a
Dec  2 17:13:53 manet kernel: ? cancel_delayed_work_sync+0xf/0xf
Dec  2 17:13:53 manet kernel: kthread+0xf4/0xf9
Dec  2 17:13:53 manet kernel: ? kthread_queue_delayed_work+0x74/0x74
Dec  2 17:13:53 manet kernel: ret_from_fork+0x24/0x30

The proximal cause is that this rpcrdma_rep has a rr_rdmabuf that
is still pointing to the old ib_device, which has been freed. The
only way that is possible is if this rpcrdma_rep was not destroyed
by rpcrdma_ia_remove.

Debugging showed that was indeed the case: this rpcrdma_rep was
still in use by a completing RPC at the time of the device removal,
and thus wasn't on the rep free list. So, it was not found by
rpcrdma_reps_destroy().

The fix is to introduce a list of all rpcrdma_reps so that they all
can be found when a device is removed. That list is used to perform
only regbuf DMA unmapping, replacing that call to
rpcrdma_reps_destroy().

Meanwhile, to prevent corruption of this list, I've moved the
destruction of temp rpcrdma_rep objects to rpcrdma_post_recvs().
rpcrdma_xprt_drain() ensures that post_recvs (and thus rep_destroy) is
not invoked while rpcrdma_reps_unmap is walking rb_all_reps, thus
protecting the rb_all_reps list.

Fixes: b0b227f071a0 ("xprtrdma: Use an llist to manage free rpcrdma_reps")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/xprtrdma/verbs.c     |   25 +++++++++++++++++++------
 net/sunrpc/xprtrdma/xprt_rdma.h |    2 ++
 2 files changed, 21 insertions(+), 6 deletions(-)

--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -76,7 +76,7 @@
  */
 static void rpcrdma_sendctx_put_locked(struct rpcrdma_sendctx *sc);
 static void rpcrdma_reqs_reset(struct rpcrdma_xprt *r_xprt);
-static void rpcrdma_reps_destroy(struct rpcrdma_buffer *buf);
+static void rpcrdma_reps_unmap(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_mrs_create(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_mrs_destroy(struct rpcrdma_buffer *buf);
 static struct rpcrdma_regbuf *
@@ -429,7 +429,7 @@ rpcrdma_ia_remove(struct rpcrdma_ia *ia)
 	/* The ULP is responsible for ensuring all DMA
 	 * mappings and MRs are gone.
 	 */
-	rpcrdma_reps_destroy(buf);
+	rpcrdma_reps_unmap(r_xprt);
 	list_for_each_entry(req, &buf->rb_allreqs, rl_all) {
 		rpcrdma_regbuf_dma_unmap(req->rl_rdmabuf);
 		rpcrdma_regbuf_dma_unmap(req->rl_sendbuf);
@@ -1086,6 +1086,7 @@ static struct rpcrdma_rep *rpcrdma_rep_c
 	rep->rr_recv_wr.sg_list = &rep->rr_rdmabuf->rg_iov;
 	rep->rr_recv_wr.num_sge = 1;
 	rep->rr_temp = temp;
+	list_add(&rep->rr_all, &r_xprt->rx_buf.rb_all_reps);
 	return rep;
 
 out_free:
@@ -1096,6 +1097,7 @@ out:
 
 static void rpcrdma_rep_destroy(struct rpcrdma_rep *rep)
 {
+	list_del(&rep->rr_all);
 	rpcrdma_regbuf_free(rep->rr_rdmabuf);
 	kfree(rep);
 }
@@ -1114,10 +1116,16 @@ static struct rpcrdma_rep *rpcrdma_rep_g
 static void rpcrdma_rep_put(struct rpcrdma_buffer *buf,
 			    struct rpcrdma_rep *rep)
 {
-	if (!rep->rr_temp)
-		llist_add(&rep->rr_node, &buf->rb_free_reps);
-	else
-		rpcrdma_rep_destroy(rep);
+	llist_add(&rep->rr_node, &buf->rb_free_reps);
+}
+
+static void rpcrdma_reps_unmap(struct rpcrdma_xprt *r_xprt)
+{
+	struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
+	struct rpcrdma_rep *rep;
+
+	list_for_each_entry(rep, &buf->rb_all_reps, rr_all)
+		rpcrdma_regbuf_dma_unmap(rep->rr_rdmabuf);
 }
 
 static void rpcrdma_reps_destroy(struct rpcrdma_buffer *buf)
@@ -1150,6 +1158,7 @@ int rpcrdma_buffer_create(struct rpcrdma
 
 	INIT_LIST_HEAD(&buf->rb_send_bufs);
 	INIT_LIST_HEAD(&buf->rb_allreqs);
+	INIT_LIST_HEAD(&buf->rb_all_reps);
 
 	rc = -ENOMEM;
 	for (i = 0; i < buf->rb_max_requests; i++) {
@@ -1506,6 +1515,10 @@ void rpcrdma_post_recvs(struct rpcrdma_x
 	wr = NULL;
 	while (needed) {
 		rep = rpcrdma_rep_get_locked(buf);
+		if (rep && rep->rr_temp) {
+			rpcrdma_rep_destroy(rep);
+			continue;
+		}
 		if (!rep)
 			rep = rpcrdma_rep_create(r_xprt, temp);
 		if (!rep)
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -203,6 +203,7 @@ struct rpcrdma_rep {
 	struct xdr_stream	rr_stream;
 	struct llist_node	rr_node;
 	struct ib_recv_wr	rr_recv_wr;
+	struct list_head	rr_all;
 };
 
 /* To reduce the rate at which a transport invokes ib_post_recv
@@ -372,6 +373,7 @@ struct rpcrdma_buffer {
 
 	struct list_head	rb_allreqs;
 	struct list_head	rb_all_mrs;
+	struct list_head	rb_all_reps;
 
 	struct llist_head	rb_free_reps;
 

[PATCH 5.4 096/203] dm: add dm-clone to the documentation index

[Greg Kroah-Hartman]

From: Diego Calleja <diegocg@gmail.com>

commit 484e0d2b11e1fdd0d17702b282eb2ed56148385f upstream.

Fixes: 7431b7835f554 ("dm: add clone target")
Signed-off-by: Diego Calleja <diegocg@gmail.com>
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/admin-guide/device-mapper/index.rst |    1 +
 1 file changed, 1 insertion(+)

--- a/Documentation/admin-guide/device-mapper/index.rst
+++ b/Documentation/admin-guide/device-mapper/index.rst
@@ -8,6 +8,7 @@ Device Mapper
     cache-policies
     cache
     delay
+    dm-clone
     dm-crypt
     dm-flakey
     dm-init

[PATCH 5.4 097/203] scsi: ufs: Give an unique ID to each ufs-bsg

[Greg Kroah-Hartman]

From: Can Guo <cang@codeaurora.org>

commit 8c850a0296004409e7bcb9464712fb2807da656a upstream.

Considering there can be multiple UFS hosts in SoC, give each ufs-bsg an
unique ID by appending the scsi host number to its device name.

Link: https://lore.kernel.org/r/0101016eca8dc9d7-d24468d3-04d2-4ef3-a906-abe8b8cbcd3d-000000@us-west-2.amazonses.com
Fixes: df032bf27a41 ("scsi: ufs: Add a bsg endpoint that supports UPIUs")
Signed-off-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/ufs/ufs_bsg.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/ufs/ufs_bsg.c
+++ b/drivers/scsi/ufs/ufs_bsg.c
@@ -202,7 +202,7 @@ int ufs_bsg_probe(struct ufs_hba *hba)
 	bsg_dev->parent = get_device(parent);
 	bsg_dev->release = ufs_bsg_node_release;
 
-	dev_set_name(bsg_dev, "ufs-bsg");
+	dev_set_name(bsg_dev, "ufs-bsg%u", shost->host_no);
 
 	ret = device_add(bsg_dev);
 	if (ret)

[PATCH 5.4 098/203] crypto: cavium/nitrox - fix firmware assignment to AE cores

[Greg Kroah-Hartman]

From: Phani Kiran Hemadri <phemadri@marvell.com>

commit 6a97a99db848748d582d79447f7c9c330ce1688e upstream.

This patch fixes assigning UCD block number of Asymmetric crypto
firmware to AE cores of CNN55XX device.

Fixes: a7268c4d4205 ("crypto: cavium/nitrox - Add support for loading asymmetric crypto firmware")
Signed-off-by: Phani Kiran Hemadri <phemadri@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/cavium/nitrox/nitrox_main.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/crypto/cavium/nitrox/nitrox_main.c
+++ b/drivers/crypto/cavium/nitrox/nitrox_main.c
@@ -103,8 +103,7 @@ static void write_to_ucd_unit(struct nit
 	offset = UCD_UCODE_LOAD_BLOCK_NUM;
 	nitrox_write_csr(ndev, offset, block_num);
 
-	code_size = ucode_size;
-	code_size = roundup(code_size, 8);
+	code_size = roundup(ucode_size, 16);
 	while (code_size) {
 		data = ucode_data[i];
 		/* write 8 bytes at a time */
@@ -220,11 +219,11 @@ static int nitrox_load_fw(struct nitrox_
 
 	/* write block number and firmware length
 	 * bit:<2:0> block number
-	 * bit:3 is set SE uses 32KB microcode
-	 * bit:3 is clear SE uses 64KB microcode
+	 * bit:3 is set AE uses 32KB microcode
+	 * bit:3 is clear AE uses 64KB microcode
 	 */
 	core_2_eid_val.value = 0ULL;
-	core_2_eid_val.ucode_blk = 0;
+	core_2_eid_val.ucode_blk = 2;
 	if (ucode_size <= CNN55XX_UCD_BLOCK_SIZE)
 		core_2_eid_val.ucode_len = 1;
 	else

[PATCH 5.4 099/203] crypto: hisilicon - select NEED_SG_DMA_LENGTH in qm Kconfig

[Greg Kroah-Hartman]

From: Zhou Wang <wangzhou1@hisilicon.com>

commit b981744ef04f7e8cb6931edab50021fff3c8077e upstream.

To avoid compile error in some platforms, select NEED_SG_DMA_LENGTH in
qm Kconfig.

Fixes: dfed0098ab91 ("crypto: hisilicon - add hardware SGL support")
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/hisilicon/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/crypto/hisilicon/Kconfig
+++ b/drivers/crypto/hisilicon/Kconfig
@@ -17,6 +17,7 @@ config CRYPTO_DEV_HISI_SEC
 config CRYPTO_DEV_HISI_QM
 	tristate
 	depends on ARM64 && PCI && PCI_MSI
+	select NEED_SG_DMA_LENGTH
 	help
 	  HiSilicon accelerator engines use a common queue management
 	  interface. Specific engine driver may use this module.

[PATCH 5.4 100/203] crypto: arm64/aes-neonbs - add return value of skcipher_walk_done() in __xts_crypt()

[Greg Kroah-Hartman]

From: Yunfeng Ye <yeyunfeng@huawei.com>

commit 9b537997b669c42cec67893538037e8d1c83c91c upstream.

A warning is found by the static code analysis tool:
  "Identical condition 'err', second condition is always false"

Fix this by adding return value of skcipher_walk_done().

Fixes: 67cfa5d3b721 ("crypto: arm64/aes-neonbs - implement ciphertext stealing for XTS")
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/crypto/aes-neonbs-glue.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/crypto/aes-neonbs-glue.c
+++ b/arch/arm64/crypto/aes-neonbs-glue.c
@@ -384,7 +384,7 @@ static int __xts_crypt(struct skcipher_r
 			goto xts_tail;
 
 		kernel_neon_end();
-		skcipher_walk_done(&walk, nbytes);
+		err = skcipher_walk_done(&walk, nbytes);
 	}
 
 	if (err || likely(!tail))

[PATCH 5.4 101/203] crypto: virtio - implement missing support for output IVs

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

commit 500e6807ce93b1fdc7d5b827c5cc167cc35630db upstream.

In order to allow for CBC to be chained, which is something that the
CTS template relies upon, implementations of CBC need to pass the
IV to be used for subsequent invocations via the IV buffer. This was
not implemented yet for virtio-crypto so implement it now.

Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/virtio/virtio_crypto_algs.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/crypto/virtio/virtio_crypto_algs.c
+++ b/drivers/crypto/virtio/virtio_crypto_algs.c
@@ -435,6 +435,11 @@ __virtio_crypto_ablkcipher_do_req(struct
 		goto free;
 	}
 	memcpy(iv, req->info, ivsize);
+	if (!vc_sym_req->encrypt)
+		scatterwalk_map_and_copy(req->info, req->src,
+					 req->nbytes - AES_BLOCK_SIZE,
+					 AES_BLOCK_SIZE, 0);
+
 	sg_init_one(&iv_sg, iv, ivsize);
 	sgs[num_out++] = &iv_sg;
 	vc_sym_req->iv = iv;
@@ -571,6 +576,10 @@ static void virtio_crypto_ablkcipher_fin
 	struct ablkcipher_request *req,
 	int err)
 {
+	if (vc_sym_req->encrypt)
+		scatterwalk_map_and_copy(req->info, req->dst,
+					 req->nbytes - AES_BLOCK_SIZE,
+					 AES_BLOCK_SIZE, 0);
 	crypto_finalize_ablkcipher_request(vc_sym_req->base.dataq->engine,
 					   req, err);
 	kzfree(vc_sym_req->iv);

[PATCH 5.4 102/203] crypto: algif_skcipher - Use chunksize instead of blocksize

[Greg Kroah-Hartman]

From: Herbert Xu <herbert@gondor.apana.org.au>

commit 5b0fe9552336338acb52756daf65dd7a4eeca73f upstream.

When algif_skcipher does a partial operation it always process data
that is a multiple of blocksize.  However, for algorithms such as
CTR this is wrong because even though it can process any number of
bytes overall, the partial block must come at the very end and not
in the middle.

This is exactly what chunksize is meant to describe so this patch
changes blocksize to chunksize.

Fixes: 8ff590903d5f ("crypto: algif_skcipher - User-space...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/algif_skcipher.c            |    2 +-
 include/crypto/internal/skcipher.h |   30 ------------------------------
 include/crypto/skcipher.h          |   30 ++++++++++++++++++++++++++++++
 3 files changed, 31 insertions(+), 31 deletions(-)

--- a/crypto/algif_skcipher.c
+++ b/crypto/algif_skcipher.c
@@ -56,7 +56,7 @@ static int _skcipher_recvmsg(struct sock
 	struct alg_sock *pask = alg_sk(psk);
 	struct af_alg_ctx *ctx = ask->private;
 	struct crypto_skcipher *tfm = pask->private;
-	unsigned int bs = crypto_skcipher_blocksize(tfm);
+	unsigned int bs = crypto_skcipher_chunksize(tfm);
 	struct af_alg_async_req *areq;
 	int err = 0;
 	size_t len = 0;
--- a/include/crypto/internal/skcipher.h
+++ b/include/crypto/internal/skcipher.h
@@ -205,19 +205,6 @@ static inline unsigned int crypto_skciph
 	return alg->max_keysize;
 }
 
-static inline unsigned int crypto_skcipher_alg_chunksize(
-	struct skcipher_alg *alg)
-{
-	if ((alg->base.cra_flags & CRYPTO_ALG_TYPE_MASK) ==
-	    CRYPTO_ALG_TYPE_BLKCIPHER)
-		return alg->base.cra_blocksize;
-
-	if (alg->base.cra_ablkcipher.encrypt)
-		return alg->base.cra_blocksize;
-
-	return alg->chunksize;
-}
-
 static inline unsigned int crypto_skcipher_alg_walksize(
 	struct skcipher_alg *alg)
 {
@@ -232,23 +219,6 @@ static inline unsigned int crypto_skciph
 }
 
 /**
- * crypto_skcipher_chunksize() - obtain chunk size
- * @tfm: cipher handle
- *
- * The block size is set to one for ciphers such as CTR.  However,
- * you still need to provide incremental updates in multiples of
- * the underlying block size as the IV does not have sub-block
- * granularity.  This is known in this API as the chunk size.
- *
- * Return: chunk size in bytes
- */
-static inline unsigned int crypto_skcipher_chunksize(
-	struct crypto_skcipher *tfm)
-{
-	return crypto_skcipher_alg_chunksize(crypto_skcipher_alg(tfm));
-}
-
-/**
  * crypto_skcipher_walksize() - obtain walk size
  * @tfm: cipher handle
  *
--- a/include/crypto/skcipher.h
+++ b/include/crypto/skcipher.h
@@ -304,6 +304,36 @@ static inline unsigned int crypto_skciph
 	return crypto_tfm_alg_blocksize(crypto_skcipher_tfm(tfm));
 }
 
+static inline unsigned int crypto_skcipher_alg_chunksize(
+	struct skcipher_alg *alg)
+{
+	if ((alg->base.cra_flags & CRYPTO_ALG_TYPE_MASK) ==
+	    CRYPTO_ALG_TYPE_BLKCIPHER)
+		return alg->base.cra_blocksize;
+
+	if (alg->base.cra_ablkcipher.encrypt)
+		return alg->base.cra_blocksize;
+
+	return alg->chunksize;
+}
+
+/**
+ * crypto_skcipher_chunksize() - obtain chunk size
+ * @tfm: cipher handle
+ *
+ * The block size is set to one for ciphers such as CTR.  However,
+ * you still need to provide incremental updates in multiples of
+ * the underlying block size as the IV does not have sub-block
+ * granularity.  This is known in this API as the chunk size.
+ *
+ * Return: chunk size in bytes
+ */
+static inline unsigned int crypto_skcipher_chunksize(
+	struct crypto_skcipher *tfm)
+{
+	return crypto_skcipher_alg_chunksize(crypto_skcipher_alg(tfm));
+}
+
 static inline unsigned int crypto_sync_skcipher_blocksize(
 	struct crypto_sync_skcipher *tfm)
 {

[PATCH 5.4 103/203] crypto: geode-aes - convert to skcipher API and make thread-safe

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit 4549f7e5aa27ffc2cba63b5db8842a3b486f5688 upstream.

The geode AES driver is heavily broken because it stores per-request
state in the transform context.  So it will crash or produce the wrong
result if used by any of the many places in the kernel that issue
concurrent requests for the same transform object.

This driver is also implemented using the deprecated blkcipher API,
which makes it difficult to fix, and puts it among the drivers
preventing that API from being removed.

Convert this driver to use the skcipher API, and change it to not store
per-request state in the transform context.

Fixes: 9fe757b0cfce ("[PATCH] crypto: Add support for the Geode LX AES hardware")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/geode-aes.c |  448 +++++++++++++++------------------------------
 drivers/crypto/geode-aes.h |   15 -
 2 files changed, 153 insertions(+), 310 deletions(-)

--- a/drivers/crypto/geode-aes.c
+++ b/drivers/crypto/geode-aes.c
@@ -10,7 +10,7 @@
 #include <linux/spinlock.h>
 #include <crypto/algapi.h>
 #include <crypto/aes.h>
-#include <crypto/skcipher.h>
+#include <crypto/internal/skcipher.h>
 
 #include <linux/io.h>
 #include <linux/delay.h>
@@ -24,12 +24,12 @@ static spinlock_t lock;
 
 /* Write a 128 bit field (either a writable key or IV) */
 static inline void
-_writefield(u32 offset, void *value)
+_writefield(u32 offset, const void *value)
 {
 	int i;
 
 	for (i = 0; i < 4; i++)
-		iowrite32(((u32 *) value)[i], _iobase + offset + (i * 4));
+		iowrite32(((const u32 *) value)[i], _iobase + offset + (i * 4));
 }
 
 /* Read a 128 bit field (either a writable key or IV) */
@@ -43,12 +43,12 @@ _readfield(u32 offset, void *value)
 }
 
 static int
-do_crypt(void *src, void *dst, int len, u32 flags)
+do_crypt(const void *src, void *dst, u32 len, u32 flags)
 {
 	u32 status;
 	u32 counter = AES_OP_TIMEOUT;
 
-	iowrite32(virt_to_phys(src), _iobase + AES_SOURCEA_REG);
+	iowrite32(virt_to_phys((void *)src), _iobase + AES_SOURCEA_REG);
 	iowrite32(virt_to_phys(dst), _iobase + AES_DSTA_REG);
 	iowrite32(len,  _iobase + AES_LENA_REG);
 
@@ -65,16 +65,14 @@ do_crypt(void *src, void *dst, int len,
 	return counter ? 0 : 1;
 }
 
-static unsigned int
-geode_aes_crypt(struct geode_aes_op *op)
+static void
+geode_aes_crypt(const struct geode_aes_tfm_ctx *tctx, const void *src,
+		void *dst, u32 len, u8 *iv, int mode, int dir)
 {
 	u32 flags = 0;
 	unsigned long iflags;
 	int ret;
 
-	if (op->len == 0)
-		return 0;
-
 	/* If the source and destination is the same, then
 	 * we need to turn on the coherent flags, otherwise
 	 * we don't need to worry
@@ -82,32 +80,28 @@ geode_aes_crypt(struct geode_aes_op *op)
 
 	flags |= (AES_CTRL_DCA | AES_CTRL_SCA);
 
-	if (op->dir == AES_DIR_ENCRYPT)
+	if (dir == AES_DIR_ENCRYPT)
 		flags |= AES_CTRL_ENCRYPT;
 
 	/* Start the critical section */
 
 	spin_lock_irqsave(&lock, iflags);
 
-	if (op->mode == AES_MODE_CBC) {
+	if (mode == AES_MODE_CBC) {
 		flags |= AES_CTRL_CBC;
-		_writefield(AES_WRITEIV0_REG, op->iv);
+		_writefield(AES_WRITEIV0_REG, iv);
 	}
 
-	if (!(op->flags & AES_FLAGS_HIDDENKEY)) {
-		flags |= AES_CTRL_WRKEY;
-		_writefield(AES_WRITEKEY0_REG, op->key);
-	}
+	flags |= AES_CTRL_WRKEY;
+	_writefield(AES_WRITEKEY0_REG, tctx->key);
 
-	ret = do_crypt(op->src, op->dst, op->len, flags);
+	ret = do_crypt(src, dst, len, flags);
 	BUG_ON(ret);
 
-	if (op->mode == AES_MODE_CBC)
-		_readfield(AES_WRITEIV0_REG, op->iv);
+	if (mode == AES_MODE_CBC)
+		_readfield(AES_WRITEIV0_REG, iv);
 
 	spin_unlock_irqrestore(&lock, iflags);
-
-	return op->len;
 }
 
 /* CRYPTO-API Functions */
@@ -115,13 +109,13 @@ geode_aes_crypt(struct geode_aes_op *op)
 static int geode_setkey_cip(struct crypto_tfm *tfm, const u8 *key,
 		unsigned int len)
 {
-	struct geode_aes_op *op = crypto_tfm_ctx(tfm);
+	struct geode_aes_tfm_ctx *tctx = crypto_tfm_ctx(tfm);
 	unsigned int ret;
 
-	op->keylen = len;
+	tctx->keylen = len;
 
 	if (len == AES_KEYSIZE_128) {
-		memcpy(op->key, key, len);
+		memcpy(tctx->key, key, len);
 		return 0;
 	}
 
@@ -134,132 +128,93 @@ static int geode_setkey_cip(struct crypt
 	/*
 	 * The requested key size is not supported by HW, do a fallback
 	 */
-	op->fallback.cip->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
-	op->fallback.cip->base.crt_flags |= (tfm->crt_flags & CRYPTO_TFM_REQ_MASK);
+	tctx->fallback.cip->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
+	tctx->fallback.cip->base.crt_flags |=
+		(tfm->crt_flags & CRYPTO_TFM_REQ_MASK);
 
-	ret = crypto_cipher_setkey(op->fallback.cip, key, len);
+	ret = crypto_cipher_setkey(tctx->fallback.cip, key, len);
 	if (ret) {
 		tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;
-		tfm->crt_flags |= (op->fallback.cip->base.crt_flags & CRYPTO_TFM_RES_MASK);
+		tfm->crt_flags |= (tctx->fallback.cip->base.crt_flags &
+				   CRYPTO_TFM_RES_MASK);
 	}
 	return ret;
 }
 
-static int geode_setkey_blk(struct crypto_tfm *tfm, const u8 *key,
-		unsigned int len)
+static int geode_setkey_skcipher(struct crypto_skcipher *tfm, const u8 *key,
+				 unsigned int len)
 {
-	struct geode_aes_op *op = crypto_tfm_ctx(tfm);
+	struct geode_aes_tfm_ctx *tctx = crypto_skcipher_ctx(tfm);
 	unsigned int ret;
 
-	op->keylen = len;
+	tctx->keylen = len;
 
 	if (len == AES_KEYSIZE_128) {
-		memcpy(op->key, key, len);
+		memcpy(tctx->key, key, len);
 		return 0;
 	}
 
 	if (len != AES_KEYSIZE_192 && len != AES_KEYSIZE_256) {
 		/* not supported at all */
-		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
 		return -EINVAL;
 	}
 
 	/*
 	 * The requested key size is not supported by HW, do a fallback
 	 */
-	crypto_sync_skcipher_clear_flags(op->fallback.blk, CRYPTO_TFM_REQ_MASK);
-	crypto_sync_skcipher_set_flags(op->fallback.blk,
-				       tfm->crt_flags & CRYPTO_TFM_REQ_MASK);
-
-	ret = crypto_sync_skcipher_setkey(op->fallback.blk, key, len);
-	if (ret) {
-		tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK;
-		tfm->crt_flags |= crypto_sync_skcipher_get_flags(op->fallback.blk) &
-				  CRYPTO_TFM_RES_MASK;
-	}
+	crypto_skcipher_clear_flags(tctx->fallback.skcipher,
+				    CRYPTO_TFM_REQ_MASK);
+	crypto_skcipher_set_flags(tctx->fallback.skcipher,
+				  crypto_skcipher_get_flags(tfm) &
+				  CRYPTO_TFM_REQ_MASK);
+	ret = crypto_skcipher_setkey(tctx->fallback.skcipher, key, len);
+	crypto_skcipher_set_flags(tfm,
+				  crypto_skcipher_get_flags(tctx->fallback.skcipher) &
+				  CRYPTO_TFM_RES_MASK);
 	return ret;
 }
 
-static int fallback_blk_dec(struct blkcipher_desc *desc,
-		struct scatterlist *dst, struct scatterlist *src,
-		unsigned int nbytes)
-{
-	struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm);
-	SYNC_SKCIPHER_REQUEST_ON_STACK(req, op->fallback.blk);
-
-	skcipher_request_set_sync_tfm(req, op->fallback.blk);
-	skcipher_request_set_callback(req, 0, NULL, NULL);
-	skcipher_request_set_crypt(req, src, dst, nbytes, desc->info);
-
-	return crypto_skcipher_decrypt(req);
-}
-
-static int fallback_blk_enc(struct blkcipher_desc *desc,
-		struct scatterlist *dst, struct scatterlist *src,
-		unsigned int nbytes)
-{
-	struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm);
-	SYNC_SKCIPHER_REQUEST_ON_STACK(req, op->fallback.blk);
-
-	skcipher_request_set_sync_tfm(req, op->fallback.blk);
-	skcipher_request_set_callback(req, 0, NULL, NULL);
-	skcipher_request_set_crypt(req, src, dst, nbytes, desc->info);
-
-	return crypto_skcipher_encrypt(req);
-}
-
 static void
 geode_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
-	struct geode_aes_op *op = crypto_tfm_ctx(tfm);
+	const struct geode_aes_tfm_ctx *tctx = crypto_tfm_ctx(tfm);
 
-	if (unlikely(op->keylen != AES_KEYSIZE_128)) {
-		crypto_cipher_encrypt_one(op->fallback.cip, out, in);
+	if (unlikely(tctx->keylen != AES_KEYSIZE_128)) {
+		crypto_cipher_encrypt_one(tctx->fallback.cip, out, in);
 		return;
 	}
 
-	op->src = (void *) in;
-	op->dst = (void *) out;
-	op->mode = AES_MODE_ECB;
-	op->flags = 0;
-	op->len = AES_BLOCK_SIZE;
-	op->dir = AES_DIR_ENCRYPT;
-
-	geode_aes_crypt(op);
+	geode_aes_crypt(tctx, in, out, AES_BLOCK_SIZE, NULL,
+			AES_MODE_ECB, AES_DIR_ENCRYPT);
 }
 
 
 static void
 geode_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
-	struct geode_aes_op *op = crypto_tfm_ctx(tfm);
+	const struct geode_aes_tfm_ctx *tctx = crypto_tfm_ctx(tfm);
 
-	if (unlikely(op->keylen != AES_KEYSIZE_128)) {
-		crypto_cipher_decrypt_one(op->fallback.cip, out, in);
+	if (unlikely(tctx->keylen != AES_KEYSIZE_128)) {
+		crypto_cipher_decrypt_one(tctx->fallback.cip, out, in);
 		return;
 	}
 
-	op->src = (void *) in;
-	op->dst = (void *) out;
-	op->mode = AES_MODE_ECB;
-	op->flags = 0;
-	op->len = AES_BLOCK_SIZE;
-	op->dir = AES_DIR_DECRYPT;
-
-	geode_aes_crypt(op);
+	geode_aes_crypt(tctx, in, out, AES_BLOCK_SIZE, NULL,
+			AES_MODE_ECB, AES_DIR_DECRYPT);
 }
 
 static int fallback_init_cip(struct crypto_tfm *tfm)
 {
 	const char *name = crypto_tfm_alg_name(tfm);
-	struct geode_aes_op *op = crypto_tfm_ctx(tfm);
+	struct geode_aes_tfm_ctx *tctx = crypto_tfm_ctx(tfm);
 
-	op->fallback.cip = crypto_alloc_cipher(name, 0,
-					       CRYPTO_ALG_NEED_FALLBACK);
+	tctx->fallback.cip = crypto_alloc_cipher(name, 0,
+						 CRYPTO_ALG_NEED_FALLBACK);
 
-	if (IS_ERR(op->fallback.cip)) {
+	if (IS_ERR(tctx->fallback.cip)) {
 		printk(KERN_ERR "Error allocating fallback algo %s\n", name);
-		return PTR_ERR(op->fallback.cip);
+		return PTR_ERR(tctx->fallback.cip);
 	}
 
 	return 0;
@@ -267,10 +222,9 @@ static int fallback_init_cip(struct cryp
 
 static void fallback_exit_cip(struct crypto_tfm *tfm)
 {
-	struct geode_aes_op *op = crypto_tfm_ctx(tfm);
+	struct geode_aes_tfm_ctx *tctx = crypto_tfm_ctx(tfm);
 
-	crypto_free_cipher(op->fallback.cip);
-	op->fallback.cip = NULL;
+	crypto_free_cipher(tctx->fallback.cip);
 }
 
 static struct crypto_alg geode_alg = {
@@ -283,7 +237,7 @@ static struct crypto_alg geode_alg = {
 	.cra_init			=	fallback_init_cip,
 	.cra_exit			=	fallback_exit_cip,
 	.cra_blocksize		=	AES_BLOCK_SIZE,
-	.cra_ctxsize		=	sizeof(struct geode_aes_op),
+	.cra_ctxsize		=	sizeof(struct geode_aes_tfm_ctx),
 	.cra_module			=	THIS_MODULE,
 	.cra_u				=	{
 		.cipher	=	{
@@ -296,220 +250,126 @@ static struct crypto_alg geode_alg = {
 	}
 };
 
-static int
-geode_cbc_decrypt(struct blkcipher_desc *desc,
-		  struct scatterlist *dst, struct scatterlist *src,
-		  unsigned int nbytes)
-{
-	struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	int err, ret;
-
-	if (nbytes % AES_BLOCK_SIZE)
-		return -EINVAL;
-
-	if (unlikely(op->keylen != AES_KEYSIZE_128))
-		return fallback_blk_dec(desc, dst, src, nbytes);
-
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt(desc, &walk);
-	op->iv = walk.iv;
-
-	while ((nbytes = walk.nbytes)) {
-		op->src = walk.src.virt.addr,
-		op->dst = walk.dst.virt.addr;
-		op->mode = AES_MODE_CBC;
-		op->len = nbytes - (nbytes % AES_BLOCK_SIZE);
-		op->dir = AES_DIR_DECRYPT;
-
-		ret = geode_aes_crypt(op);
-
-		nbytes -= ret;
-		err = blkcipher_walk_done(desc, &walk, nbytes);
-	}
-
-	return err;
-}
-
-static int
-geode_cbc_encrypt(struct blkcipher_desc *desc,
-		  struct scatterlist *dst, struct scatterlist *src,
-		  unsigned int nbytes)
-{
-	struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	int err, ret;
-
-	if (nbytes % AES_BLOCK_SIZE)
-		return -EINVAL;
-
-	if (unlikely(op->keylen != AES_KEYSIZE_128))
-		return fallback_blk_enc(desc, dst, src, nbytes);
-
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt(desc, &walk);
-	op->iv = walk.iv;
-
-	while ((nbytes = walk.nbytes)) {
-		op->src = walk.src.virt.addr,
-		op->dst = walk.dst.virt.addr;
-		op->mode = AES_MODE_CBC;
-		op->len = nbytes - (nbytes % AES_BLOCK_SIZE);
-		op->dir = AES_DIR_ENCRYPT;
-
-		ret = geode_aes_crypt(op);
-		nbytes -= ret;
-		err = blkcipher_walk_done(desc, &walk, nbytes);
-	}
-
-	return err;
-}
-
-static int fallback_init_blk(struct crypto_tfm *tfm)
+static int geode_init_skcipher(struct crypto_skcipher *tfm)
 {
-	const char *name = crypto_tfm_alg_name(tfm);
-	struct geode_aes_op *op = crypto_tfm_ctx(tfm);
+	const char *name = crypto_tfm_alg_name(&tfm->base);
+	struct geode_aes_tfm_ctx *tctx = crypto_skcipher_ctx(tfm);
 
-	op->fallback.blk = crypto_alloc_sync_skcipher(name, 0,
-						      CRYPTO_ALG_NEED_FALLBACK);
-	if (IS_ERR(op->fallback.blk)) {
+	tctx->fallback.skcipher =
+		crypto_alloc_skcipher(name, 0, CRYPTO_ALG_NEED_FALLBACK |
+				      CRYPTO_ALG_ASYNC);
+	if (IS_ERR(tctx->fallback.skcipher)) {
 		printk(KERN_ERR "Error allocating fallback algo %s\n", name);
-		return PTR_ERR(op->fallback.blk);
+		return PTR_ERR(tctx->fallback.skcipher);
 	}
 
+	crypto_skcipher_set_reqsize(tfm, sizeof(struct skcipher_request) +
+				    crypto_skcipher_reqsize(tctx->fallback.skcipher));
 	return 0;
 }
 
-static void fallback_exit_blk(struct crypto_tfm *tfm)
+static void geode_exit_skcipher(struct crypto_skcipher *tfm)
 {
-	struct geode_aes_op *op = crypto_tfm_ctx(tfm);
+	struct geode_aes_tfm_ctx *tctx = crypto_skcipher_ctx(tfm);
 
-	crypto_free_sync_skcipher(op->fallback.blk);
-	op->fallback.blk = NULL;
+	crypto_free_skcipher(tctx->fallback.skcipher);
 }
 
-static struct crypto_alg geode_cbc_alg = {
-	.cra_name		=	"cbc(aes)",
-	.cra_driver_name	=	"cbc-aes-geode",
-	.cra_priority		=	400,
-	.cra_flags			=	CRYPTO_ALG_TYPE_BLKCIPHER |
-						CRYPTO_ALG_KERN_DRIVER_ONLY |
-						CRYPTO_ALG_NEED_FALLBACK,
-	.cra_init			=	fallback_init_blk,
-	.cra_exit			=	fallback_exit_blk,
-	.cra_blocksize		=	AES_BLOCK_SIZE,
-	.cra_ctxsize		=	sizeof(struct geode_aes_op),
-	.cra_alignmask		=	15,
-	.cra_type			=	&crypto_blkcipher_type,
-	.cra_module			=	THIS_MODULE,
-	.cra_u				=	{
-		.blkcipher	=	{
-			.min_keysize	=	AES_MIN_KEY_SIZE,
-			.max_keysize	=	AES_MAX_KEY_SIZE,
-			.setkey			=	geode_setkey_blk,
-			.encrypt		=	geode_cbc_encrypt,
-			.decrypt		=	geode_cbc_decrypt,
-			.ivsize			=	AES_BLOCK_SIZE,
-		}
-	}
-};
-
-static int
-geode_ecb_decrypt(struct blkcipher_desc *desc,
-		  struct scatterlist *dst, struct scatterlist *src,
-		  unsigned int nbytes)
-{
-	struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	int err, ret;
+static int geode_skcipher_crypt(struct skcipher_request *req, int mode, int dir)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	const struct geode_aes_tfm_ctx *tctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
 
-	if (nbytes % AES_BLOCK_SIZE)
-		return -EINVAL;
+	if (unlikely(tctx->keylen != AES_KEYSIZE_128)) {
+		struct skcipher_request *subreq = skcipher_request_ctx(req);
 
-	if (unlikely(op->keylen != AES_KEYSIZE_128))
-		return fallback_blk_dec(desc, dst, src, nbytes);
+		*subreq = *req;
+		skcipher_request_set_tfm(subreq, tctx->fallback.skcipher);
+		if (dir == AES_DIR_DECRYPT)
+			return crypto_skcipher_decrypt(subreq);
+		else
+			return crypto_skcipher_encrypt(subreq);
+	}
 
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt(desc, &walk);
+	err = skcipher_walk_virt(&walk, req, false);
 
-	while ((nbytes = walk.nbytes)) {
-		op->src = walk.src.virt.addr,
-		op->dst = walk.dst.virt.addr;
-		op->mode = AES_MODE_ECB;
-		op->len = nbytes - (nbytes % AES_BLOCK_SIZE);
-		op->dir = AES_DIR_DECRYPT;
-
-		ret = geode_aes_crypt(op);
-		nbytes -= ret;
-		err = blkcipher_walk_done(desc, &walk, nbytes);
+	while ((nbytes = walk.nbytes) != 0) {
+		geode_aes_crypt(tctx, walk.src.virt.addr, walk.dst.virt.addr,
+				round_down(nbytes, AES_BLOCK_SIZE),
+				walk.iv, mode, dir);
+		err = skcipher_walk_done(&walk, nbytes % AES_BLOCK_SIZE);
 	}
 
 	return err;
 }
 
-static int
-geode_ecb_encrypt(struct blkcipher_desc *desc,
-		  struct scatterlist *dst, struct scatterlist *src,
-		  unsigned int nbytes)
-{
-	struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	int err, ret;
-
-	if (nbytes % AES_BLOCK_SIZE)
-		return -EINVAL;
-
-	if (unlikely(op->keylen != AES_KEYSIZE_128))
-		return fallback_blk_enc(desc, dst, src, nbytes);
-
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt(desc, &walk);
-
-	while ((nbytes = walk.nbytes)) {
-		op->src = walk.src.virt.addr,
-		op->dst = walk.dst.virt.addr;
-		op->mode = AES_MODE_ECB;
-		op->len = nbytes - (nbytes % AES_BLOCK_SIZE);
-		op->dir = AES_DIR_ENCRYPT;
-
-		ret = geode_aes_crypt(op);
-		nbytes -= ret;
-		ret =  blkcipher_walk_done(desc, &walk, nbytes);
-	}
+static int geode_cbc_encrypt(struct skcipher_request *req)
+{
+	return geode_skcipher_crypt(req, AES_MODE_CBC, AES_DIR_ENCRYPT);
+}
 
-	return err;
+static int geode_cbc_decrypt(struct skcipher_request *req)
+{
+	return geode_skcipher_crypt(req, AES_MODE_CBC, AES_DIR_DECRYPT);
 }
 
-static struct crypto_alg geode_ecb_alg = {
-	.cra_name			=	"ecb(aes)",
-	.cra_driver_name	=	"ecb-aes-geode",
-	.cra_priority		=	400,
-	.cra_flags			=	CRYPTO_ALG_TYPE_BLKCIPHER |
-						CRYPTO_ALG_KERN_DRIVER_ONLY |
-						CRYPTO_ALG_NEED_FALLBACK,
-	.cra_init			=	fallback_init_blk,
-	.cra_exit			=	fallback_exit_blk,
-	.cra_blocksize		=	AES_BLOCK_SIZE,
-	.cra_ctxsize		=	sizeof(struct geode_aes_op),
-	.cra_alignmask		=	15,
-	.cra_type			=	&crypto_blkcipher_type,
-	.cra_module			=	THIS_MODULE,
-	.cra_u				=	{
-		.blkcipher	=	{
-			.min_keysize	=	AES_MIN_KEY_SIZE,
-			.max_keysize	=	AES_MAX_KEY_SIZE,
-			.setkey			=	geode_setkey_blk,
-			.encrypt		=	geode_ecb_encrypt,
-			.decrypt		=	geode_ecb_decrypt,
-		}
-	}
+static int geode_ecb_encrypt(struct skcipher_request *req)
+{
+	return geode_skcipher_crypt(req, AES_MODE_ECB, AES_DIR_ENCRYPT);
+}
+
+static int geode_ecb_decrypt(struct skcipher_request *req)
+{
+	return geode_skcipher_crypt(req, AES_MODE_ECB, AES_DIR_DECRYPT);
+}
+
+static struct skcipher_alg geode_skcipher_algs[] = {
+	{
+		.base.cra_name		= "cbc(aes)",
+		.base.cra_driver_name	= "cbc-aes-geode",
+		.base.cra_priority	= 400,
+		.base.cra_flags		= CRYPTO_ALG_KERN_DRIVER_ONLY |
+					  CRYPTO_ALG_NEED_FALLBACK,
+		.base.cra_blocksize	= AES_BLOCK_SIZE,
+		.base.cra_ctxsize	= sizeof(struct geode_aes_tfm_ctx),
+		.base.cra_alignmask	= 15,
+		.base.cra_module	= THIS_MODULE,
+		.init			= geode_init_skcipher,
+		.exit			= geode_exit_skcipher,
+		.setkey			= geode_setkey_skcipher,
+		.encrypt		= geode_cbc_encrypt,
+		.decrypt		= geode_cbc_decrypt,
+		.min_keysize		= AES_MIN_KEY_SIZE,
+		.max_keysize		= AES_MAX_KEY_SIZE,
+		.ivsize			= AES_BLOCK_SIZE,
+	}, {
+		.base.cra_name		= "ecb(aes)",
+		.base.cra_driver_name	= "ecb-aes-geode",
+		.base.cra_priority	= 400,
+		.base.cra_flags		= CRYPTO_ALG_KERN_DRIVER_ONLY |
+					  CRYPTO_ALG_NEED_FALLBACK,
+		.base.cra_blocksize	= AES_BLOCK_SIZE,
+		.base.cra_ctxsize	= sizeof(struct geode_aes_tfm_ctx),
+		.base.cra_alignmask	= 15,
+		.base.cra_module	= THIS_MODULE,
+		.init			= geode_init_skcipher,
+		.exit			= geode_exit_skcipher,
+		.setkey			= geode_setkey_skcipher,
+		.encrypt		= geode_ecb_encrypt,
+		.decrypt		= geode_ecb_decrypt,
+		.min_keysize		= AES_MIN_KEY_SIZE,
+		.max_keysize		= AES_MAX_KEY_SIZE,
+	},
 };
 
 static void geode_aes_remove(struct pci_dev *dev)
 {
 	crypto_unregister_alg(&geode_alg);
-	crypto_unregister_alg(&geode_ecb_alg);
-	crypto_unregister_alg(&geode_cbc_alg);
+	crypto_unregister_skciphers(geode_skcipher_algs,
+				    ARRAY_SIZE(geode_skcipher_algs));
 
 	pci_iounmap(dev, _iobase);
 	_iobase = NULL;
@@ -547,20 +407,14 @@ static int geode_aes_probe(struct pci_de
 	if (ret)
 		goto eiomap;
 
-	ret = crypto_register_alg(&geode_ecb_alg);
+	ret = crypto_register_skciphers(geode_skcipher_algs,
+					ARRAY_SIZE(geode_skcipher_algs));
 	if (ret)
 		goto ealg;
 
-	ret = crypto_register_alg(&geode_cbc_alg);
-	if (ret)
-		goto eecb;
-
 	dev_notice(&dev->dev, "GEODE AES engine enabled.\n");
 	return 0;
 
- eecb:
-	crypto_unregister_alg(&geode_ecb_alg);
-
  ealg:
 	crypto_unregister_alg(&geode_alg);
 
--- a/drivers/crypto/geode-aes.h
+++ b/drivers/crypto/geode-aes.h
@@ -46,21 +46,10 @@
 
 #define AES_OP_TIMEOUT    0x50000
 
-struct geode_aes_op {
-
-	void *src;
-	void *dst;
-
-	u32 mode;
-	u32 dir;
-	u32 flags;
-	int len;
-
+struct geode_aes_tfm_ctx {
 	u8 key[AES_KEYSIZE_128];
-	u8 *iv;
-
 	union {
-		struct crypto_sync_skcipher *blk;
+		struct crypto_skcipher *skcipher;
 		struct crypto_cipher *cip;
 	} fallback;
 	u32 keylen;

[PATCH 5.4 104/203] NFSv2: Fix a typo in encode_sattr()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit ad97a995d8edff820d4238bd0dfc69f440031ae6 upstream.

Encode the mtime correctly.

Fixes: 95582b0083883 ("vfs: change inode times to use struct timespec64")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs2xdr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -370,7 +370,7 @@ static void encode_sattr(struct xdr_stre
 	} else
 		p = xdr_time_not_set(p);
 	if (attr->ia_valid & ATTR_MTIME_SET) {
-		ts = timespec64_to_timespec(attr->ia_atime);
+		ts = timespec64_to_timespec(attr->ia_mtime);
 		xdr_encode_time(p, &ts);
 	} else if (attr->ia_valid & ATTR_MTIME) {
 		ts = timespec64_to_timespec(attr->ia_mtime);

[PATCH 5.4 105/203] nfsd: Fix cld_net->cn_tfm initialization

[Greg Kroah-Hartman]

From: Scott Mayhew <smayhew@redhat.com>

commit 18b9a895e652979b70f9c20565394a69354dfebc upstream.

Don't assign an error pointer to cld_net->cn_tfm, otherwise an oops will
occur in nfsd4_remove_cld_pipe().

Also, move the initialization of cld_net->cn_tfm so that it occurs after
the check to see if nfsdcld is running.  This is necessary because
nfsd4_client_tracking_init() looks for -ETIMEDOUT to determine whether
to use the "old" nfsdcld tracking ops.

Fixes: 6ee95d1c8991 ("nfsd: add support for upcall version 2")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfsd/nfs4recover.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -1578,6 +1578,7 @@ nfsd4_cld_tracking_init(struct net *net)
 	struct nfsd_net *nn = net_generic(net, nfsd_net_id);
 	bool running;
 	int retries = 10;
+	struct crypto_shash *tfm;
 
 	status = nfs4_cld_state_init(net);
 	if (status)
@@ -1586,11 +1587,6 @@ nfsd4_cld_tracking_init(struct net *net)
 	status = __nfsd4_init_cld_pipe(net);
 	if (status)
 		goto err_shutdown;
-	nn->cld_net->cn_tfm = crypto_alloc_shash("sha256", 0, 0);
-	if (IS_ERR(nn->cld_net->cn_tfm)) {
-		status = PTR_ERR(nn->cld_net->cn_tfm);
-		goto err_remove;
-	}
 
 	/*
 	 * rpc pipe upcalls take 30 seconds to time out, so we don't want to
@@ -1607,6 +1603,12 @@ nfsd4_cld_tracking_init(struct net *net)
 		status = -ETIMEDOUT;
 		goto err_remove;
 	}
+	tfm = crypto_alloc_shash("sha256", 0, 0);
+	if (IS_ERR(tfm)) {
+		status = PTR_ERR(tfm);
+		goto err_remove;
+	}
+	nn->cld_net->cn_tfm = tfm;
 
 	status = nfsd4_cld_get_version(nn);
 	if (status == -EOPNOTSUPP)

[PATCH 5.4 106/203] nfsd: v4 support requires CRYPTO_SHA256

[Greg Kroah-Hartman]

From: Scott Mayhew <smayhew@redhat.com>

commit a2e2f2dc77a18d2b0f450fb7fcb4871c9f697822 upstream.

The new nfsdcld client tracking operations use sha256 to compute hashes
of the kerberos principals, so make sure CRYPTO_SHA256 is enabled.

Fixes: 6ee95d1c8991 ("nfsd: add support for upcall version 2")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfsd/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfsd/Kconfig
+++ b/fs/nfsd/Kconfig
@@ -73,7 +73,7 @@ config NFSD_V4
 	select NFSD_V3
 	select FS_POSIX_ACL
 	select SUNRPC_GSS
-	select CRYPTO
+	select CRYPTO_SHA256
 	select GRACE_PERIOD
 	help
 	  This option enables support in your system's NFS server for

[PATCH 5.4 107/203] NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit 5c441544f045e679afd6c3c6d9f7aaf5fa5f37b0 upstream.

If the server returns a bad or dead session error, the we don't want
to update the session slot number, but just immediately schedule
recovery and allow it to proceed.

We can/should then remove handling in other places

Fixes: 3453d5708b33 ("NFSv4.1: Avoid false retries when RPC calls are interrupted")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |   34 +++++++++++++++++++++++++---------
 1 file changed, 25 insertions(+), 9 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -521,9 +521,7 @@ static int nfs4_do_handle_exception(stru
 		case -NFS4ERR_DEADSESSION:
 		case -NFS4ERR_SEQ_FALSE_RETRY:
 		case -NFS4ERR_SEQ_MISORDERED:
-			dprintk("%s ERROR: %d Reset session\n", __func__,
-				errorcode);
-			nfs4_schedule_session_recovery(clp->cl_session, errorcode);
+			/* Handled in nfs41_sequence_process() */
 			goto wait_on_recovery;
 #endif /* defined(CONFIG_NFS_V4_1) */
 		case -NFS4ERR_FILE_OPEN:
@@ -782,6 +780,7 @@ static int nfs41_sequence_process(struct
 	struct nfs4_session *session;
 	struct nfs4_slot *slot = res->sr_slot;
 	struct nfs_client *clp;
+	int status;
 	int ret = 1;
 
 	if (slot == NULL)
@@ -793,8 +792,13 @@ static int nfs41_sequence_process(struct
 	session = slot->table->session;
 
 	trace_nfs4_sequence_done(session, res);
+
+	status = res->sr_status;
+	if (task->tk_status == -NFS4ERR_DEADSESSION)
+		status = -NFS4ERR_DEADSESSION;
+
 	/* Check the SEQUENCE operation status */
-	switch (res->sr_status) {
+	switch (status) {
 	case 0:
 		/* Mark this sequence number as having been acked */
 		nfs4_slot_sequence_acked(slot, slot->seq_nr);
@@ -866,6 +870,10 @@ static int nfs41_sequence_process(struct
 		 */
 		slot->seq_nr = slot->seq_nr_highest_sent;
 		goto out_retry;
+	case -NFS4ERR_BADSESSION:
+	case -NFS4ERR_DEADSESSION:
+	case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION:
+		goto session_recover;
 	default:
 		/* Just update the slot sequence no. */
 		slot->seq_done = 1;
@@ -876,8 +884,10 @@ out:
 out_noaction:
 	return ret;
 session_recover:
-	nfs4_schedule_session_recovery(session, res->sr_status);
-	goto retry_nowait;
+	nfs4_schedule_session_recovery(session, status);
+	dprintk("%s ERROR: %d Reset session\n", __func__, status);
+	nfs41_sequence_free_slot(res);
+	goto out;
 retry_new_seq:
 	++slot->seq_nr;
 retry_nowait:
@@ -2188,7 +2198,6 @@ static int nfs4_handle_delegation_recall
 		case -NFS4ERR_BAD_HIGH_SLOT:
 		case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION:
 		case -NFS4ERR_DEADSESSION:
-			nfs4_schedule_session_recovery(server->nfs_client->cl_session, err);
 			return -EAGAIN;
 		case -NFS4ERR_STALE_CLIENTID:
 		case -NFS4ERR_STALE_STATEID:
@@ -7820,6 +7829,15 @@ nfs41_same_server_scope(struct nfs41_ser
 static void
 nfs4_bind_one_conn_to_session_done(struct rpc_task *task, void *calldata)
 {
+	struct nfs41_bind_conn_to_session_args *args = task->tk_msg.rpc_argp;
+	struct nfs_client *clp = args->client;
+
+	switch (task->tk_status) {
+	case -NFS4ERR_BADSESSION:
+	case -NFS4ERR_DEADSESSION:
+		nfs4_schedule_session_recovery(clp->cl_session,
+				task->tk_status);
+	}
 }
 
 static const struct rpc_call_ops nfs4_bind_one_conn_to_session_ops = {
@@ -8867,8 +8885,6 @@ static int nfs41_reclaim_complete_handle
 	case -NFS4ERR_BADSESSION:
 	case -NFS4ERR_DEADSESSION:
 	case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION:
-		nfs4_schedule_session_recovery(clp->cl_session,
-				task->tk_status);
 		break;
 	default:
 		nfs4_schedule_lease_recovery(clp);

[PATCH 5.4 108/203] NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit 5326de9e94bedcf7366e7e7625d4deb8c1f1ca8a upstream.

If nfs4_delegreturn_prepare needs to wait for a layoutreturn to complete
then make sure we drop the sequence slot if we hold it.

Fixes: 1c5bd76d17cc ("pNFS: Enable layoutreturn operation for return-on-close")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -6252,8 +6252,10 @@ static void nfs4_delegreturn_prepare(str
 
 	d_data = (struct nfs4_delegreturndata *)data;
 
-	if (!d_data->lr.roc && nfs4_wait_on_layoutreturn(d_data->inode, task))
+	if (!d_data->lr.roc && nfs4_wait_on_layoutreturn(d_data->inode, task)) {
+		nfs4_sequence_done(task, &d_data->res.seq_res);
 		return;
+	}
 
 	lo = d_data->args.lr_args ? d_data->args.lr_args->layout : NULL;
 	if (lo && !pnfs_layout_is_valid(lo)) {

[PATCH 5.4 109/203] iio: imu: st_lsm6dsx: fix gyro gain definitions for LSM9DS1

[Greg Kroah-Hartman]

From: Lorenzo Bianconi <lorenzo@kernel.org>

commit 1b3751017e09f0857bc38f9b1be08dce38f3d92c upstream.

Fix typos in gyro gain definitions for LSM9DS1 sensor

Fixes: 52f4b1f19679 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -152,9 +152,10 @@ static const struct st_lsm6dsx_settings
 					.addr = 0x10,
 					.mask = GENMASK(4, 3),
 				},
-				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(245), 0x0 },
-				.fs_avl[1] = {  IIO_DEGREE_TO_RAD(500), 0x1 },
-				.fs_avl[2] = { IIO_DEGREE_TO_RAD(2000), 0x3 },
+
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
 				.fs_len = 3,
 			},
 		},

[PATCH 5.4 110/203] iio: imu: adis16480: assign bias value only if operation succeeded

[Greg Kroah-Hartman]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

commit 9b742763d9d4195e823ae6ece760c9ed0500c1dc upstream.

This was found only after the whole thing with the inline functions, but
the compiler actually found something. The value of the `bias` (in
adis16480_get_calibbias()) should only be set if the read operation was
successful.

No actual known problem occurs as users of this function all
ultimately check the return value.  Hence probably not stable material.

Fixes: 2f3abe6cbb6c9 ("iio:imu: Add support for the ADIS16480 and similar IMUs")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/imu/adis16480.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -454,12 +454,14 @@ static int adis16480_get_calibbias(struc
 	case IIO_MAGN:
 	case IIO_PRESSURE:
 		ret = adis_read_reg_16(&st->adis, reg, &val16);
-		*bias = sign_extend32(val16, 15);
+		if (ret == 0)
+			*bias = sign_extend32(val16, 15);
 		break;
 	case IIO_ANGL_VEL:
 	case IIO_ACCEL:
 		ret = adis_read_reg_32(&st->adis, reg, &val32);
-		*bias = sign_extend32(val32, 31);
+		if (ret == 0)
+			*bias = sign_extend32(val32, 31);
 		break;
 	default:
 			ret = -EINVAL;

[PATCH 5.4 111/203] mei: fix modalias documentation

[Greg Kroah-Hartman]

From: Alexander Usyskin <alexander.usyskin@intel.com>

commit 73668309215285366c433489de70d31362987be9 upstream.

mei client bus added the client protocol version to the device alias,
but ABI documentation was not updated.

Fixes: b26864cad1c9 (mei: bus: add client protocol version to the device alias)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191008005735.12707-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/ABI/testing/sysfs-bus-mei |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/ABI/testing/sysfs-bus-mei
+++ b/Documentation/ABI/testing/sysfs-bus-mei
@@ -4,7 +4,7 @@ KernelVersion:	3.10
 Contact:	Samuel Ortiz <sameo@linux.intel.com>
 		linux-mei@linux.intel.com
 Description:	Stores the same MODALIAS value emitted by uevent
-		Format: mei:<mei device name>:<device uuid>:
+		Format: mei:<mei device name>:<device uuid>:<protocol version>
 
 What:		/sys/bus/mei/devices/.../name
 Date:		May 2015

[PATCH 5.4 112/203] clk: meson: axg-audio: fix regmap last register

[Greg Kroah-Hartman]

From: Jerome Brunet <jbrunet@baylibre.com>

commit 255cab9d27d78703f7450d720859ee146d0ee6e1 upstream.

Since the addition of the g12a, the last register is
AUDIO_CLK_SPDIFOUT_B_CTRL.

Fixes: 075001385c66 ("clk: meson: axg-audio: add g12a support")
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/meson/axg-audio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/meson/axg-audio.c
+++ b/drivers/clk/meson/axg-audio.c
@@ -1001,7 +1001,7 @@ static const struct regmap_config axg_au
 	.reg_bits	= 32,
 	.val_bits	= 32,
 	.reg_stride	= 4,
-	.max_register	= AUDIO_CLK_PDMIN_CTRL1,
+	.max_register	= AUDIO_CLK_SPDIFOUT_B_CTRL,
 };
 
 struct audioclk_data {

[PATCH 5.4 113/203] clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume

[Greg Kroah-Hartman]

From: Marian Mihailescu <mihailescu2m@gmail.com>

commit e21be0d1d7bd7f78a77613f6bcb6965e72b22fc1 upstream.

Save and restore top PLL related configuration registers for big (APLL)
and LITTLE (KPLL) cores during suspend/resume cycle. So far, CPU clocks
were reset to default values after suspend/resume cycle and performance
after system resume was affected when performance governor has been selected.

Fixes: 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list")
Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/samsung/clk-exynos5420.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -165,6 +165,8 @@ static const unsigned long exynos5x_clk_
 	GATE_BUS_CPU,
 	GATE_SCLK_CPU,
 	CLKOUT_CMU_CPU,
+	APLL_CON0,
+	KPLL_CON0,
 	CPLL_CON0,
 	DPLL_CON0,
 	EPLL_CON0,

[PATCH 5.4 114/203] clk: Fix memory leak in clk_unregister()

[Greg Kroah-Hartman]

From: Kishon Vijay Abraham I <kishon@ti.com>

commit 8247470772beb38822f226c99a2ed8c195f6b438 upstream.

Memory allocated in alloc_clk() for 'struct clk' and
'const char *con_id' while invoking clk_register() is never freed
in clk_unregister(), resulting in kmemleak showing the following
backtrace.

  backtrace:
    [<00000000546f5dd0>] kmem_cache_alloc+0x18c/0x270
    [<0000000073a32862>] alloc_clk+0x30/0x70
    [<0000000082942480>] __clk_register+0xc8/0x760
    [<000000005c859fca>] devm_clk_register+0x54/0xb0
    [<00000000868834a8>] 0xffff800008c60950
    [<00000000d5a80534>] platform_drv_probe+0x50/0xa0
    [<000000001b3889fc>] really_probe+0x108/0x348
    [<00000000953fa60a>] driver_probe_device+0x58/0x100
    [<0000000008acc17c>] device_driver_attach+0x6c/0x90
    [<0000000022813df3>] __driver_attach+0x84/0xc8
    [<00000000448d5443>] bus_for_each_dev+0x74/0xc8
    [<00000000294aa93f>] driver_attach+0x20/0x28
    [<00000000e5e52626>] bus_add_driver+0x148/0x1f0
    [<000000001de21efc>] driver_register+0x60/0x110
    [<00000000af07c068>] __platform_driver_register+0x40/0x48
    [<0000000060fa80ee>] 0xffff800008c66020

Fix it here.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lkml.kernel.org/r/20191022071153.21118-1-kishon@ti.com
Fixes: 1df4046a93e0 ("clk: Combine __clk_get() and __clk_create_clk()")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/clk.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3886,6 +3886,7 @@ void clk_unregister(struct clk *clk)
 					__func__, clk->core->name);
 
 	kref_put(&clk->core->ref, __clk_release);
+	free_clk(clk);
 unlock:
 	clk_prepare_unlock();
 }

[PATCH 5.4 115/203] dmaengine: dw: platform: Mark hclk clock optional

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit f27c22736d133baff0ab3fdc7b015d998267d817 upstream.

On some platforms the clock can be fixed rate, always running one and
there is no need to do anything with it.

In order to support those platforms, switch to use optional clock.

Fixes: f8d9ddbc2851 ("dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake")
Depends-on: 60b8f0ddf1a9 ("clk: Add (devm_)clk_get_optional() functions")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20190924085116.83683-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/dw/platform.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/dma/dw/platform.c
+++ b/drivers/dma/dw/platform.c
@@ -66,7 +66,7 @@ static int dw_probe(struct platform_devi
 
 	data->chip = chip;
 
-	chip->clk = devm_clk_get(chip->dev, "hclk");
+	chip->clk = devm_clk_get_optional(chip->dev, "hclk");
 	if (IS_ERR(chip->clk))
 		return PTR_ERR(chip->clk);
 	err = clk_prepare_enable(chip->clk);

[PATCH 5.4 116/203] clk: imx: pll14xx: Fix quick switch of S/K parameter

[Greg Kroah-Hartman]

From: Leonard Crestez <leonard.crestez@nxp.com>

commit 094234fcf46146339caaac8282aa15d225a5911a upstream.

The PLL14xx on imx8m can change the S and K parameter without requiring
a reset and relock of the whole PLL.

Fix clk_pll144xx_mp_change register reading and use it for pll1443 as
well since no reset+relock is required on K changes either.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes: 8646d4dcc7fb ("clk: imx: Add PLLs driver for imx8mm soc")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/imx/clk-pll14xx.c |   40 ++++++++--------------------------------
 1 file changed, 8 insertions(+), 32 deletions(-)

--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -112,43 +112,17 @@ static unsigned long clk_pll1443x_recalc
 	return fvco;
 }
 
-static inline bool clk_pll1416x_mp_change(const struct imx_pll14xx_rate_table *rate,
+static inline bool clk_pll14xx_mp_change(const struct imx_pll14xx_rate_table *rate,
 					  u32 pll_div)
 {
 	u32 old_mdiv, old_pdiv;
 
-	old_mdiv = (pll_div >> MDIV_SHIFT) & MDIV_MASK;
-	old_pdiv = (pll_div >> PDIV_SHIFT) & PDIV_MASK;
+	old_mdiv = (pll_div & MDIV_MASK) >> MDIV_SHIFT;
+	old_pdiv = (pll_div & PDIV_MASK) >> PDIV_SHIFT;
 
 	return rate->mdiv != old_mdiv || rate->pdiv != old_pdiv;
 }
 
-static inline bool clk_pll1443x_mpk_change(const struct imx_pll14xx_rate_table *rate,
-					  u32 pll_div_ctl0, u32 pll_div_ctl1)
-{
-	u32 old_mdiv, old_pdiv, old_kdiv;
-
-	old_mdiv = (pll_div_ctl0 >> MDIV_SHIFT) & MDIV_MASK;
-	old_pdiv = (pll_div_ctl0 >> PDIV_SHIFT) & PDIV_MASK;
-	old_kdiv = (pll_div_ctl1 >> KDIV_SHIFT) & KDIV_MASK;
-
-	return rate->mdiv != old_mdiv || rate->pdiv != old_pdiv ||
-		rate->kdiv != old_kdiv;
-}
-
-static inline bool clk_pll1443x_mp_change(const struct imx_pll14xx_rate_table *rate,
-					  u32 pll_div_ctl0, u32 pll_div_ctl1)
-{
-	u32 old_mdiv, old_pdiv, old_kdiv;
-
-	old_mdiv = (pll_div_ctl0 >> MDIV_SHIFT) & MDIV_MASK;
-	old_pdiv = (pll_div_ctl0 >> PDIV_SHIFT) & PDIV_MASK;
-	old_kdiv = (pll_div_ctl1 >> KDIV_SHIFT) & KDIV_MASK;
-
-	return rate->mdiv != old_mdiv || rate->pdiv != old_pdiv ||
-		rate->kdiv != old_kdiv;
-}
-
 static int clk_pll14xx_wait_lock(struct clk_pll14xx *pll)
 {
 	u32 val;
@@ -174,7 +148,7 @@ static int clk_pll1416x_set_rate(struct
 
 	tmp = readl_relaxed(pll->base + 4);
 
-	if (!clk_pll1416x_mp_change(rate, tmp)) {
+	if (!clk_pll14xx_mp_change(rate, tmp)) {
 		tmp &= ~(SDIV_MASK) << SDIV_SHIFT;
 		tmp |= rate->sdiv << SDIV_SHIFT;
 		writel_relaxed(tmp, pll->base + 4);
@@ -239,13 +213,15 @@ static int clk_pll1443x_set_rate(struct
 	}
 
 	tmp = readl_relaxed(pll->base + 4);
-	div_val = readl_relaxed(pll->base + 8);
 
-	if (!clk_pll1443x_mpk_change(rate, tmp, div_val)) {
+	if (!clk_pll14xx_mp_change(rate, tmp)) {
 		tmp &= ~(SDIV_MASK) << SDIV_SHIFT;
 		tmp |= rate->sdiv << SDIV_SHIFT;
 		writel_relaxed(tmp, pll->base + 4);
 
+		tmp = rate->kdiv << KDIV_SHIFT;
+		writel_relaxed(tmp, pll->base + 8);
+
 		return 0;
 	}
 

[PATCH 5.4 117/203] rsi: fix potential null dereference in rsi_probe()

[Greg Kroah-Hartman]

From: Denis Efremov <efremov@linux.com>

commit f170d44bc4ec2feae5f6206980e7ae7fbf0432a0 upstream.

The id pointer can be NULL in rsi_probe(). It is checked everywhere except
for the else branch in the idProduct condition. The patch adds NULL check
before the id dereference in the rsi_dbg() call.

Fixes: 54fdb318c111 ("rsi: add new device model for 9116")
Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/rsi/rsi_91x_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -793,7 +793,7 @@ static int rsi_probe(struct usb_interfac
 		adapter->device_model = RSI_DEV_9116;
 	} else {
 		rsi_dbg(ERR_ZONE, "%s: Unsupported RSI device id 0x%x\n",
-			__func__, id->idProduct);
+			__func__, id ? id->idProduct : 0x0);
 		goto err1;
 	}
 

[PATCH 5.4 118/203] affs: fix a memory leak in affs_remount

[Greg Kroah-Hartman]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

commit 450c3d4166837c496ebce03650c08800991f2150 upstream.

In affs_remount if data is provided it is duplicated into new_opts.  The
allocated memory for new_opts is only released if parse_options fails.

There's a bit of history behind new_options, originally there was
save/replace options on the VFS layer so the 'data' passed must not
change (thus strdup), this got cleaned up in later patches. But not
completely.

There's no reason to do the strdup in cases where the filesystem does
not need to reuse the 'data' again, because strsep would modify it
directly.

Fixes: c8f33d0bec99 ("affs: kstrdup() memory handling")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/affs/super.c |    6 ------
 1 file changed, 6 deletions(-)

--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -561,14 +561,9 @@ affs_remount(struct super_block *sb, int
 	int			 root_block;
 	unsigned long		 mount_flags;
 	int			 res = 0;
-	char			*new_opts;
 	char			 volume[32];
 	char			*prefix = NULL;
 
-	new_opts = kstrdup(data, GFP_KERNEL);
-	if (data && !new_opts)
-		return -ENOMEM;
-
 	pr_debug("%s(flags=0x%x,opts=\"%s\")\n", __func__, *flags, data);
 
 	sync_filesystem(sb);
@@ -579,7 +574,6 @@ affs_remount(struct super_block *sb, int
 			   &blocksize, &prefix, volume,
 			   &mount_flags)) {
 		kfree(prefix);
-		kfree(new_opts);
 		return -EINVAL;
 	}
 

[PATCH 5.4 119/203] pinctl: ti: iodelay: fix error checking on pinctrl_count_index_with_args call

[Greg Kroah-Hartman]

From: Colin Ian King <colin.king@canonical.com>

commit 5ff8aca906f3a7a7db79fad92f2a4401107ef50d upstream.

The call to pinctrl_count_index_with_args checks for a -EINVAL return
however this function calls pinctrl_get_list_and_count and this can
return -ENOENT. Rather than check for a specific error, fix this by
checking for any error return to catch the -ENOENT case.

Addresses-Coverity: ("Improper use of negative")
Fixes: 003910ebc83b ("pinctrl: Introduce TI IOdelay configuration driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190920122030.14340-1-colin.king@canonical.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/ti/pinctrl-ti-iodelay.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c
+++ b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c
@@ -496,7 +496,7 @@ static int ti_iodelay_dt_node_to_map(str
 		return -EINVAL;
 
 	rows = pinctrl_count_index_with_args(np, name);
-	if (rows == -EINVAL)
+	if (rows < 0)
 		return rows;
 
 	*map = devm_kzalloc(iod->dev, sizeof(**map), GFP_KERNEL);

[PATCH 5.4 120/203] pinctrl: sh-pfc: Fix PINMUX_IPSR_PHYS() to set GPSR

[Greg Kroah-Hartman]

From: Keiya Nobuta <nobuta.keiya@fujitsu.com>

commit d30710b8cce3a581c170d69002e311cc18ed47d3 upstream.

This patch allows PINMUX_IPSR_PHYS() to set bits in GPSR.
When assigning function to pin, GPSR should be set to peripheral
function.
For example when using SCL3, GPSR2 bit7 (PWM1_A pin) should be set to
peripheral function.

Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com>
Link: https://lore.kernel.org/r/20191008060112.29819-1-nobuta.keiya@fujitsu.com
Fixes: 50d1ba1764b3e00a ("pinctrl: sh-pfc: Add physical pin multiplexing helper macros")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/sh-pfc/sh_pfc.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/pinctrl/sh-pfc/sh_pfc.h
+++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
@@ -422,12 +422,12 @@ extern const struct sh_pfc_soc_info shx3
 /*
  * Describe a pinmux configuration in which a pin is physically multiplexed
  * with other pins.
- *   - ipsr: IPSR field (unused, for documentation purposes only)
+ *   - ipsr: IPSR field
  *   - fn: Function name
  *   - psel: Physical multiplexing selector
  */
 #define PINMUX_IPSR_PHYS(ipsr, fn, psel) \
-	PINMUX_DATA(fn##_MARK, FN_##psel)
+	PINMUX_DATA(fn##_MARK, FN_##psel, FN_##ipsr)
 
 /*
  * Describe a pinmux configuration for a single-function pin with GPIO

[PATCH 5.4 121/203] pinctrl: sh-pfc: Do not use platform_get_irq() to count interrupts

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit ad7fe1a1a35994a201497443b5140bf54b074cca upstream.

As platform_get_irq() now prints an error when the interrupt does not
exist, counting interrupts by looping until failure causes the printing
of scary messages like:

    sh-pfc e6060000.pin-controller: IRQ index 0 not found

Fix this by using the platform_irq_count() helper instead.

Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191016142601.28255-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/sh-pfc/core.c |   16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

--- a/drivers/pinctrl/sh-pfc/core.c
+++ b/drivers/pinctrl/sh-pfc/core.c
@@ -29,12 +29,12 @@
 static int sh_pfc_map_resources(struct sh_pfc *pfc,
 				struct platform_device *pdev)
 {
-	unsigned int num_windows, num_irqs;
 	struct sh_pfc_window *windows;
 	unsigned int *irqs = NULL;
+	unsigned int num_windows;
 	struct resource *res;
 	unsigned int i;
-	int irq;
+	int num_irqs;
 
 	/* Count the MEM and IRQ resources. */
 	for (num_windows = 0;; num_windows++) {
@@ -42,17 +42,13 @@ static int sh_pfc_map_resources(struct s
 		if (!res)
 			break;
 	}
-	for (num_irqs = 0;; num_irqs++) {
-		irq = platform_get_irq(pdev, num_irqs);
-		if (irq == -EPROBE_DEFER)
-			return irq;
-		if (irq < 0)
-			break;
-	}
-
 	if (num_windows == 0)
 		return -EINVAL;
 
+	num_irqs = platform_irq_count(pdev);
+	if (num_irqs < 0)
+		return num_irqs;
+
 	/* Allocate memory windows and IRQs arrays. */
 	windows = devm_kcalloc(pfc->dev, num_windows, sizeof(*windows),
 			       GFP_KERNEL);

[PATCH 5.4 122/203] pinctrl: lewisburg: Update pin list according to v1.1v6

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit e66ff71fd0dba36a53f91f39e4da6c7b84764f2e upstream.

Version 1.1v6 of pin list has some changes in pin names for Intel Lewisburg.

Update the driver accordingly.

Note, it reveals the bug in the driver that misses two pins in GPP_L and
has rather two extra ones. That's why the ordering of some groups is changed.

Fixes: e480b745386e ("pinctrl: intel: Add Intel Lewisburg GPIO support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191120133739.54332-1-andriy.shevchenko@linux.intel.com
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/intel/pinctrl-lewisburg.c |  171 +++++++++++++++---------------
 1 file changed, 86 insertions(+), 85 deletions(-)

--- a/drivers/pinctrl/intel/pinctrl-lewisburg.c
+++ b/drivers/pinctrl/intel/pinctrl-lewisburg.c
@@ -33,6 +33,7 @@
 		.npins = ((e) - (s) + 1),		\
 	}
 
+/* Lewisburg */
 static const struct pinctrl_pin_desc lbg_pins[] = {
 	/* GPP_A */
 	PINCTRL_PIN(0, "RCINB"),
@@ -72,7 +73,7 @@ static const struct pinctrl_pin_desc lbg
 	PINCTRL_PIN(33, "SRCCLKREQB_4"),
 	PINCTRL_PIN(34, "SRCCLKREQB_5"),
 	PINCTRL_PIN(35, "GPP_B_11"),
-	PINCTRL_PIN(36, "GLB_RST_WARN_N"),
+	PINCTRL_PIN(36, "SLP_S0B"),
 	PINCTRL_PIN(37, "PLTRSTB"),
 	PINCTRL_PIN(38, "SPKR"),
 	PINCTRL_PIN(39, "GPP_B_15"),
@@ -185,96 +186,96 @@ static const struct pinctrl_pin_desc lbg
 	PINCTRL_PIN(141, "GBE_PCI_DIS"),
 	PINCTRL_PIN(142, "GBE_LAN_DIS"),
 	PINCTRL_PIN(143, "GPP_I_10"),
-	PINCTRL_PIN(144, "GPIO_RCOMP_3P3"),
 	/* GPP_J */
-	PINCTRL_PIN(145, "GBE_LED_0_0"),
-	PINCTRL_PIN(146, "GBE_LED_0_1"),
-	PINCTRL_PIN(147, "GBE_LED_1_0"),
-	PINCTRL_PIN(148, "GBE_LED_1_1"),
-	PINCTRL_PIN(149, "GBE_LED_2_0"),
-	PINCTRL_PIN(150, "GBE_LED_2_1"),
-	PINCTRL_PIN(151, "GBE_LED_3_0"),
-	PINCTRL_PIN(152, "GBE_LED_3_1"),
-	PINCTRL_PIN(153, "GBE_SCL_0"),
-	PINCTRL_PIN(154, "GBE_SDA_0"),
-	PINCTRL_PIN(155, "GBE_SCL_1"),
-	PINCTRL_PIN(156, "GBE_SDA_1"),
-	PINCTRL_PIN(157, "GBE_SCL_2"),
-	PINCTRL_PIN(158, "GBE_SDA_2"),
-	PINCTRL_PIN(159, "GBE_SCL_3"),
-	PINCTRL_PIN(160, "GBE_SDA_3"),
-	PINCTRL_PIN(161, "GBE_SDP_0_0"),
-	PINCTRL_PIN(162, "GBE_SDP_0_1"),
-	PINCTRL_PIN(163, "GBE_SDP_1_0"),
-	PINCTRL_PIN(164, "GBE_SDP_1_1"),
-	PINCTRL_PIN(165, "GBE_SDP_2_0"),
-	PINCTRL_PIN(166, "GBE_SDP_2_1"),
-	PINCTRL_PIN(167, "GBE_SDP_3_0"),
-	PINCTRL_PIN(168, "GBE_SDP_3_1"),
+	PINCTRL_PIN(144, "GBE_LED_0_0"),
+	PINCTRL_PIN(145, "GBE_LED_0_1"),
+	PINCTRL_PIN(146, "GBE_LED_1_0"),
+	PINCTRL_PIN(147, "GBE_LED_1_1"),
+	PINCTRL_PIN(148, "GBE_LED_2_0"),
+	PINCTRL_PIN(149, "GBE_LED_2_1"),
+	PINCTRL_PIN(150, "GBE_LED_3_0"),
+	PINCTRL_PIN(151, "GBE_LED_3_1"),
+	PINCTRL_PIN(152, "GBE_SCL_0"),
+	PINCTRL_PIN(153, "GBE_SDA_0"),
+	PINCTRL_PIN(154, "GBE_SCL_1"),
+	PINCTRL_PIN(155, "GBE_SDA_1"),
+	PINCTRL_PIN(156, "GBE_SCL_2"),
+	PINCTRL_PIN(157, "GBE_SDA_2"),
+	PINCTRL_PIN(158, "GBE_SCL_3"),
+	PINCTRL_PIN(159, "GBE_SDA_3"),
+	PINCTRL_PIN(160, "GBE_SDP_0_0"),
+	PINCTRL_PIN(161, "GBE_SDP_0_1"),
+	PINCTRL_PIN(162, "GBE_SDP_1_0"),
+	PINCTRL_PIN(163, "GBE_SDP_1_1"),
+	PINCTRL_PIN(164, "GBE_SDP_2_0"),
+	PINCTRL_PIN(165, "GBE_SDP_2_1"),
+	PINCTRL_PIN(166, "GBE_SDP_3_0"),
+	PINCTRL_PIN(167, "GBE_SDP_3_1"),
 	/* GPP_K */
-	PINCTRL_PIN(169, "GBE_RMIICLK"),
-	PINCTRL_PIN(170, "GBE_RMII_TXD_0"),
-	PINCTRL_PIN(171, "GBE_RMII_TXD_1"),
+	PINCTRL_PIN(168, "GBE_RMIICLK"),
+	PINCTRL_PIN(169, "GBE_RMII_RXD_0"),
+	PINCTRL_PIN(170, "GBE_RMII_RXD_1"),
+	PINCTRL_PIN(171, "GBE_RMII_CRS_DV"),
 	PINCTRL_PIN(172, "GBE_RMII_TX_EN"),
-	PINCTRL_PIN(173, "GBE_RMII_CRS_DV"),
-	PINCTRL_PIN(174, "GBE_RMII_RXD_0"),
-	PINCTRL_PIN(175, "GBE_RMII_RXD_1"),
-	PINCTRL_PIN(176, "GBE_RMII_RX_ER"),
-	PINCTRL_PIN(177, "GBE_RMII_ARBIN"),
-	PINCTRL_PIN(178, "GBE_RMII_ARB_OUT"),
-	PINCTRL_PIN(179, "PE_RST_N"),
-	PINCTRL_PIN(180, "GPIO_RCOMP_1P8_3P3"),
+	PINCTRL_PIN(173, "GBE_RMII_TXD_0"),
+	PINCTRL_PIN(174, "GBE_RMII_TXD_1"),
+	PINCTRL_PIN(175, "GBE_RMII_RX_ER"),
+	PINCTRL_PIN(176, "GBE_RMII_ARBIN"),
+	PINCTRL_PIN(177, "GBE_RMII_ARB_OUT"),
+	PINCTRL_PIN(178, "PE_RST_N"),
 	/* GPP_G */
-	PINCTRL_PIN(181, "FAN_TACH_0"),
-	PINCTRL_PIN(182, "FAN_TACH_1"),
-	PINCTRL_PIN(183, "FAN_TACH_2"),
-	PINCTRL_PIN(184, "FAN_TACH_3"),
-	PINCTRL_PIN(185, "FAN_TACH_4"),
-	PINCTRL_PIN(186, "FAN_TACH_5"),
-	PINCTRL_PIN(187, "FAN_TACH_6"),
-	PINCTRL_PIN(188, "FAN_TACH_7"),
-	PINCTRL_PIN(189, "FAN_PWM_0"),
-	PINCTRL_PIN(190, "FAN_PWM_1"),
-	PINCTRL_PIN(191, "FAN_PWM_2"),
-	PINCTRL_PIN(192, "FAN_PWM_3"),
-	PINCTRL_PIN(193, "GSXDOUT"),
-	PINCTRL_PIN(194, "GSXSLOAD"),
-	PINCTRL_PIN(195, "GSXDIN"),
-	PINCTRL_PIN(196, "GSXSRESETB"),
-	PINCTRL_PIN(197, "GSXCLK"),
-	PINCTRL_PIN(198, "ADR_COMPLETE"),
-	PINCTRL_PIN(199, "NMIB"),
-	PINCTRL_PIN(200, "SMIB"),
-	PINCTRL_PIN(201, "SSATA_DEVSLP_0"),
-	PINCTRL_PIN(202, "SSATA_DEVSLP_1"),
-	PINCTRL_PIN(203, "SSATA_DEVSLP_2"),
-	PINCTRL_PIN(204, "SSATAXPCIE0_SSATAGP0"),
+	PINCTRL_PIN(179, "FAN_TACH_0"),
+	PINCTRL_PIN(180, "FAN_TACH_1"),
+	PINCTRL_PIN(181, "FAN_TACH_2"),
+	PINCTRL_PIN(182, "FAN_TACH_3"),
+	PINCTRL_PIN(183, "FAN_TACH_4"),
+	PINCTRL_PIN(184, "FAN_TACH_5"),
+	PINCTRL_PIN(185, "FAN_TACH_6"),
+	PINCTRL_PIN(186, "FAN_TACH_7"),
+	PINCTRL_PIN(187, "FAN_PWM_0"),
+	PINCTRL_PIN(188, "FAN_PWM_1"),
+	PINCTRL_PIN(189, "FAN_PWM_2"),
+	PINCTRL_PIN(190, "FAN_PWM_3"),
+	PINCTRL_PIN(191, "GSXDOUT"),
+	PINCTRL_PIN(192, "GSXSLOAD"),
+	PINCTRL_PIN(193, "GSXDIN"),
+	PINCTRL_PIN(194, "GSXSRESETB"),
+	PINCTRL_PIN(195, "GSXCLK"),
+	PINCTRL_PIN(196, "ADR_COMPLETE"),
+	PINCTRL_PIN(197, "NMIB"),
+	PINCTRL_PIN(198, "SMIB"),
+	PINCTRL_PIN(199, "SSATA_DEVSLP_0"),
+	PINCTRL_PIN(200, "SSATA_DEVSLP_1"),
+	PINCTRL_PIN(201, "SSATA_DEVSLP_2"),
+	PINCTRL_PIN(202, "SSATAXPCIE0_SSATAGP0"),
 	/* GPP_H */
-	PINCTRL_PIN(205, "SRCCLKREQB_6"),
-	PINCTRL_PIN(206, "SRCCLKREQB_7"),
-	PINCTRL_PIN(207, "SRCCLKREQB_8"),
-	PINCTRL_PIN(208, "SRCCLKREQB_9"),
-	PINCTRL_PIN(209, "SRCCLKREQB_10"),
-	PINCTRL_PIN(210, "SRCCLKREQB_11"),
-	PINCTRL_PIN(211, "SRCCLKREQB_12"),
-	PINCTRL_PIN(212, "SRCCLKREQB_13"),
-	PINCTRL_PIN(213, "SRCCLKREQB_14"),
-	PINCTRL_PIN(214, "SRCCLKREQB_15"),
-	PINCTRL_PIN(215, "SML2CLK"),
-	PINCTRL_PIN(216, "SML2DATA"),
-	PINCTRL_PIN(217, "SML2ALERTB"),
-	PINCTRL_PIN(218, "SML3CLK"),
-	PINCTRL_PIN(219, "SML3DATA"),
-	PINCTRL_PIN(220, "SML3ALERTB"),
-	PINCTRL_PIN(221, "SML4CLK"),
-	PINCTRL_PIN(222, "SML4DATA"),
-	PINCTRL_PIN(223, "SML4ALERTB"),
-	PINCTRL_PIN(224, "SSATAXPCIE1_SSATAGP1"),
-	PINCTRL_PIN(225, "SSATAXPCIE2_SSATAGP2"),
-	PINCTRL_PIN(226, "SSATAXPCIE3_SSATAGP3"),
-	PINCTRL_PIN(227, "SSATAXPCIE4_SSATAGP4"),
-	PINCTRL_PIN(228, "SSATAXPCIE5_SSATAGP5"),
+	PINCTRL_PIN(203, "SRCCLKREQB_6"),
+	PINCTRL_PIN(204, "SRCCLKREQB_7"),
+	PINCTRL_PIN(205, "SRCCLKREQB_8"),
+	PINCTRL_PIN(206, "SRCCLKREQB_9"),
+	PINCTRL_PIN(207, "SRCCLKREQB_10"),
+	PINCTRL_PIN(208, "SRCCLKREQB_11"),
+	PINCTRL_PIN(209, "SRCCLKREQB_12"),
+	PINCTRL_PIN(210, "SRCCLKREQB_13"),
+	PINCTRL_PIN(211, "SRCCLKREQB_14"),
+	PINCTRL_PIN(212, "SRCCLKREQB_15"),
+	PINCTRL_PIN(213, "SML2CLK"),
+	PINCTRL_PIN(214, "SML2DATA"),
+	PINCTRL_PIN(215, "SML2ALERTB"),
+	PINCTRL_PIN(216, "SML3CLK"),
+	PINCTRL_PIN(217, "SML3DATA"),
+	PINCTRL_PIN(218, "SML3ALERTB"),
+	PINCTRL_PIN(219, "SML4CLK"),
+	PINCTRL_PIN(220, "SML4DATA"),
+	PINCTRL_PIN(221, "SML4ALERTB"),
+	PINCTRL_PIN(222, "SSATAXPCIE1_SSATAGP1"),
+	PINCTRL_PIN(223, "SSATAXPCIE2_SSATAGP2"),
+	PINCTRL_PIN(224, "SSATAXPCIE3_SSATAGP3"),
+	PINCTRL_PIN(225, "SSATAXPCIE4_SSATAGP4"),
+	PINCTRL_PIN(226, "SSATAXPCIE5_SSATAGP5"),
 	/* GPP_L */
+	PINCTRL_PIN(227, "GPP_L_0"),
+	PINCTRL_PIN(228, "EC_CSME_INTR_OUT"),
 	PINCTRL_PIN(229, "VISA2CH0_D0"),
 	PINCTRL_PIN(230, "VISA2CH0_D1"),
 	PINCTRL_PIN(231, "VISA2CH0_D2"),

[PATCH 5.4 123/203] PCI: pciehp: Do not disable interrupt twice on suspend

[Greg Kroah-Hartman]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit 75fcc0ce72e5cea2e357cdde858216c5bad40442 upstream.

We try to keep PCIe hotplug ports runtime suspended when entering system
suspend. Because the PCIe portdrv sets the DPM_FLAG_NEVER_SKIP flag, the PM
core always calls system suspend/resume hooks even if the device is left
runtime suspended. Since PCIe hotplug driver re-used the same function for
both runtime suspend and system suspend, it ended up disabling hotplug
interrupt twice and the second time following was printed:

  pciehp 0000:03:01.0:pcie204: pcie_do_write_cmd: no response from device

Prevent this from happening by checking whether the device is already
runtime suspended when the system suspend hook is called.

Fixes: 9c62f0bfb832 ("PCI: pciehp: Implement runtime PM callbacks")
Link: https://lore.kernel.org/r/20191029170022.57528-1-mika.westerberg@linux.intel.com
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/hotplug/pciehp_core.c |   25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -253,7 +253,7 @@ static bool pme_is_native(struct pcie_de
 	return pcie_ports_native || host->native_pme;
 }
 
-static int pciehp_suspend(struct pcie_device *dev)
+static void pciehp_disable_interrupt(struct pcie_device *dev)
 {
 	/*
 	 * Disable hotplug interrupt so that it does not trigger
@@ -261,7 +261,19 @@ static int pciehp_suspend(struct pcie_de
 	 */
 	if (pme_is_native(dev))
 		pcie_disable_interrupt(get_service_data(dev));
+}
 
+#ifdef CONFIG_PM_SLEEP
+static int pciehp_suspend(struct pcie_device *dev)
+{
+	/*
+	 * If the port is already runtime suspended we can keep it that
+	 * way.
+	 */
+	if (dev_pm_smart_suspend_and_suspended(&dev->port->dev))
+		return 0;
+
+	pciehp_disable_interrupt(dev);
 	return 0;
 }
 
@@ -279,6 +291,7 @@ static int pciehp_resume_noirq(struct pc
 
 	return 0;
 }
+#endif
 
 static int pciehp_resume(struct pcie_device *dev)
 {
@@ -292,6 +305,12 @@ static int pciehp_resume(struct pcie_dev
 	return 0;
 }
 
+static int pciehp_runtime_suspend(struct pcie_device *dev)
+{
+	pciehp_disable_interrupt(dev);
+	return 0;
+}
+
 static int pciehp_runtime_resume(struct pcie_device *dev)
 {
 	struct controller *ctrl = get_service_data(dev);
@@ -318,10 +337,12 @@ static struct pcie_port_service_driver h
 	.remove		= pciehp_remove,
 
 #ifdef	CONFIG_PM
+#ifdef	CONFIG_PM_SLEEP
 	.suspend	= pciehp_suspend,
 	.resume_noirq	= pciehp_resume_noirq,
 	.resume		= pciehp_resume,
-	.runtime_suspend = pciehp_suspend,
+#endif
+	.runtime_suspend = pciehp_runtime_suspend,
 	.runtime_resume	= pciehp_runtime_resume,
 #endif	/* PM */
 };

[PATCH 5.4 124/203] Revert "drm/virtio: switch virtio_gpu_wait_ioctl() to gem helper."

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit e6733ec8948475c4b62574e452135dc629294d75 which is
commit 29cf12394c0565d7eb1685bf0c1b4749aa6a8b66 upstream.

Alistair writes:
	After updating to 5.4.7 we noticed that virtio_gpu's wait ioctl
	stopped working correctly.

	It looks like 29cf12394c05 ("drm/virtio: switch
	virtio_gpu_wait_ioctl() to gem helper.") was picked up automatically,
	but it depends on 889165ad6190 ("drm/virtio: pass gem reservation
	object to ttm init") from earlier in Gerd's series in Linus's tree,
	which was not picked up.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/virtio/virtgpu_ioctl.c |   28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

--- a/drivers/gpu/drm/virtio/virtgpu_ioctl.c
+++ b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
@@ -463,29 +463,25 @@ out:
 }
 
 static int virtio_gpu_wait_ioctl(struct drm_device *dev, void *data,
-				 struct drm_file *file)
+			    struct drm_file *file)
 {
 	struct drm_virtgpu_3d_wait *args = data;
-	struct drm_gem_object *obj;
-	long timeout = 15 * HZ;
+	struct drm_gem_object *gobj = NULL;
+	struct virtio_gpu_object *qobj = NULL;
 	int ret;
+	bool nowait = false;
 
-	obj = drm_gem_object_lookup(file, args->handle);
-	if (obj == NULL)
+	gobj = drm_gem_object_lookup(file, args->handle);
+	if (gobj == NULL)
 		return -ENOENT;
 
-	if (args->flags & VIRTGPU_WAIT_NOWAIT) {
-		ret = dma_resv_test_signaled_rcu(obj->resv, true);
-	} else {
-		ret = dma_resv_wait_timeout_rcu(obj->resv, true, true,
-						timeout);
-	}
-	if (ret == 0)
-		ret = -EBUSY;
-	else if (ret > 0)
-		ret = 0;
+	qobj = gem_to_virtio_gpu_obj(gobj);
 
-	drm_gem_object_put_unlocked(obj);
+	if (args->flags & VIRTGPU_WAIT_NOWAIT)
+		nowait = true;
+	ret = virtio_gpu_object_wait(qobj, nowait);
+
+	drm_gem_object_put_unlocked(gobj);
 	return ret;
 }
 

[PATCH 5.4 125/203] drm/amdgpu: cleanup creating BOs at fixed location (v2)

[Greg Kroah-Hartman]

From: Christian König <christian.koenig@amd.com>

commit de7b45babd9be25138ff5e4a0c34eefffbb226ff upstream.

The placement is something TTM/BO internal and the RAS code should
avoid touching that directly.

Add a helper to create a BO at a fixed location and use that instead.

v2: squash in fixes (Alex)

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_object.c |   61 ++++++++++++++++++++
 drivers/gpu/drm/amd/amdgpu/amdgpu_object.h |    3 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c    |   85 ++---------------------------
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c    |   82 ++++-----------------------
 4 files changed, 83 insertions(+), 148 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
@@ -343,6 +343,67 @@ int amdgpu_bo_create_kernel(struct amdgp
 }
 
 /**
+ * amdgpu_bo_create_kernel_at - create BO for kernel use at specific location
+ *
+ * @adev: amdgpu device object
+ * @offset: offset of the BO
+ * @size: size of the BO
+ * @domain: where to place it
+ * @bo_ptr:  used to initialize BOs in structures
+ * @cpu_addr: optional CPU address mapping
+ *
+ * Creates a kernel BO at a specific offset in the address space of the domain.
+ *
+ * Returns:
+ * 0 on success, negative error code otherwise.
+ */
+int amdgpu_bo_create_kernel_at(struct amdgpu_device *adev,
+			       uint64_t offset, uint64_t size, uint32_t domain,
+			       struct amdgpu_bo **bo_ptr, void **cpu_addr)
+{
+	struct ttm_operation_ctx ctx = { false, false };
+	unsigned int i;
+	int r;
+
+	offset &= PAGE_MASK;
+	size = ALIGN(size, PAGE_SIZE);
+
+	r = amdgpu_bo_create_reserved(adev, size, PAGE_SIZE, domain, bo_ptr,
+				      NULL, NULL);
+	if (r)
+		return r;
+
+	/*
+	 * Remove the original mem node and create a new one at the request
+	 * position.
+	 */
+	for (i = 0; i < (*bo_ptr)->placement.num_placement; ++i) {
+		(*bo_ptr)->placements[i].fpfn = offset >> PAGE_SHIFT;
+		(*bo_ptr)->placements[i].lpfn = (offset + size) >> PAGE_SHIFT;
+	}
+
+	ttm_bo_mem_put(&(*bo_ptr)->tbo, &(*bo_ptr)->tbo.mem);
+	r = ttm_bo_mem_space(&(*bo_ptr)->tbo, &(*bo_ptr)->placement,
+			     &(*bo_ptr)->tbo.mem, &ctx);
+	if (r)
+		goto error;
+
+	if (cpu_addr) {
+		r = amdgpu_bo_kmap(*bo_ptr, cpu_addr);
+		if (r)
+			goto error;
+	}
+
+	amdgpu_bo_unreserve(*bo_ptr);
+	return 0;
+
+error:
+	amdgpu_bo_unreserve(*bo_ptr);
+	amdgpu_bo_unref(bo_ptr);
+	return r;
+}
+
+/**
  * amdgpu_bo_free_kernel - free BO for kernel use
  *
  * @bo: amdgpu BO to free
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
@@ -237,6 +237,9 @@ int amdgpu_bo_create_kernel(struct amdgp
 			    unsigned long size, int align,
 			    u32 domain, struct amdgpu_bo **bo_ptr,
 			    u64 *gpu_addr, void **cpu_addr);
+int amdgpu_bo_create_kernel_at(struct amdgpu_device *adev,
+			       uint64_t offset, uint64_t size, uint32_t domain,
+			       struct amdgpu_bo **bo_ptr, void **cpu_addr);
 void amdgpu_bo_free_kernel(struct amdgpu_bo **bo, u64 *gpu_addr,
 			   void **cpu_addr);
 int amdgpu_bo_kmap(struct amdgpu_bo *bo, void **ptr);
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
@@ -65,12 +65,6 @@ const char *ras_block_string[] = {
 /* inject address is 52 bits */
 #define	RAS_UMC_INJECT_ADDR_LIMIT	(0x1ULL << 52)
 
-static int amdgpu_ras_reserve_vram(struct amdgpu_device *adev,
-		uint64_t offset, uint64_t size,
-		struct amdgpu_bo **bo_ptr);
-static int amdgpu_ras_release_vram(struct amdgpu_device *adev,
-		struct amdgpu_bo **bo_ptr);
-
 static ssize_t amdgpu_ras_debugfs_read(struct file *f, char __user *buf,
 					size_t size, loff_t *pos)
 {
@@ -1214,75 +1208,6 @@ static void amdgpu_ras_do_recovery(struc
 	atomic_set(&ras->in_recovery, 0);
 }
 
-static int amdgpu_ras_release_vram(struct amdgpu_device *adev,
-		struct amdgpu_bo **bo_ptr)
-{
-	/* no need to free it actually. */
-	amdgpu_bo_free_kernel(bo_ptr, NULL, NULL);
-	return 0;
-}
-
-/* reserve vram with size@offset */
-static int amdgpu_ras_reserve_vram(struct amdgpu_device *adev,
-		uint64_t offset, uint64_t size,
-		struct amdgpu_bo **bo_ptr)
-{
-	struct ttm_operation_ctx ctx = { false, false };
-	struct amdgpu_bo_param bp;
-	int r = 0;
-	int i;
-	struct amdgpu_bo *bo;
-
-	if (bo_ptr)
-		*bo_ptr = NULL;
-	memset(&bp, 0, sizeof(bp));
-	bp.size = size;
-	bp.byte_align = PAGE_SIZE;
-	bp.domain = AMDGPU_GEM_DOMAIN_VRAM;
-	bp.flags = AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS |
-		AMDGPU_GEM_CREATE_NO_CPU_ACCESS;
-	bp.type = ttm_bo_type_kernel;
-	bp.resv = NULL;
-
-	r = amdgpu_bo_create(adev, &bp, &bo);
-	if (r)
-		return -EINVAL;
-
-	r = amdgpu_bo_reserve(bo, false);
-	if (r)
-		goto error_reserve;
-
-	offset = ALIGN(offset, PAGE_SIZE);
-	for (i = 0; i < bo->placement.num_placement; ++i) {
-		bo->placements[i].fpfn = offset >> PAGE_SHIFT;
-		bo->placements[i].lpfn = (offset + size) >> PAGE_SHIFT;
-	}
-
-	ttm_bo_mem_put(&bo->tbo, &bo->tbo.mem);
-	r = ttm_bo_mem_space(&bo->tbo, &bo->placement, &bo->tbo.mem, &ctx);
-	if (r)
-		goto error_pin;
-
-	r = amdgpu_bo_pin_restricted(bo,
-			AMDGPU_GEM_DOMAIN_VRAM,
-			offset,
-			offset + size);
-	if (r)
-		goto error_pin;
-
-	if (bo_ptr)
-		*bo_ptr = bo;
-
-	amdgpu_bo_unreserve(bo);
-	return r;
-
-error_pin:
-	amdgpu_bo_unreserve(bo);
-error_reserve:
-	amdgpu_bo_unref(&bo);
-	return r;
-}
-
 /* alloc/realloc bps array */
 static int amdgpu_ras_realloc_eh_data_space(struct amdgpu_device *adev,
 		struct ras_err_handler_data *data, int pages)
@@ -1345,7 +1270,7 @@ int amdgpu_ras_reserve_bad_pages(struct
 	struct amdgpu_ras *con = amdgpu_ras_get_context(adev);
 	struct ras_err_handler_data *data;
 	uint64_t bp;
-	struct amdgpu_bo *bo;
+	struct amdgpu_bo *bo = NULL;
 	int i;
 
 	if (!con || !con->eh_data)
@@ -1359,12 +1284,14 @@ int amdgpu_ras_reserve_bad_pages(struct
 	for (i = data->last_reserved; i < data->count; i++) {
 		bp = data->bps[i].bp;
 
-		if (amdgpu_ras_reserve_vram(adev, bp << PAGE_SHIFT,
-					PAGE_SIZE, &bo))
+		if (amdgpu_bo_create_kernel_at(adev, bp << PAGE_SHIFT, PAGE_SIZE,
+					       AMDGPU_GEM_DOMAIN_VRAM,
+					       &bo, NULL))
 			DRM_ERROR("RAS ERROR: reserve vram %llx fail\n", bp);
 
 		data->bps[i].bo = bo;
 		data->last_reserved = i + 1;
+		bo = NULL;
 	}
 out:
 	mutex_unlock(&con->recovery_lock);
@@ -1390,7 +1317,7 @@ static int amdgpu_ras_release_bad_pages(
 	for (i = data->last_reserved - 1; i >= 0; i--) {
 		bo = data->bps[i].bo;
 
-		amdgpu_ras_release_vram(adev, &bo);
+		amdgpu_bo_free_kernel(&bo, NULL, NULL);
 
 		data->bps[i].bo = bo;
 		data->last_reserved = i;
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -1639,81 +1639,25 @@ static void amdgpu_ttm_fw_reserve_vram_f
  */
 static int amdgpu_ttm_fw_reserve_vram_init(struct amdgpu_device *adev)
 {
-	struct ttm_operation_ctx ctx = { false, false };
-	struct amdgpu_bo_param bp;
-	int r = 0;
-	int i;
-	u64 vram_size = adev->gmc.visible_vram_size;
-	u64 offset = adev->fw_vram_usage.start_offset;
-	u64 size = adev->fw_vram_usage.size;
-	struct amdgpu_bo *bo;
+	uint64_t vram_size = adev->gmc.visible_vram_size;
+	int r;
 
-	memset(&bp, 0, sizeof(bp));
-	bp.size = adev->fw_vram_usage.size;
-	bp.byte_align = PAGE_SIZE;
-	bp.domain = AMDGPU_GEM_DOMAIN_VRAM;
-	bp.flags = AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED |
-		AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS;
-	bp.type = ttm_bo_type_kernel;
-	bp.resv = NULL;
 	adev->fw_vram_usage.va = NULL;
 	adev->fw_vram_usage.reserved_bo = NULL;
 
-	if (adev->fw_vram_usage.size > 0 &&
-		adev->fw_vram_usage.size <= vram_size) {
-
-		r = amdgpu_bo_create(adev, &bp,
-				     &adev->fw_vram_usage.reserved_bo);
-		if (r)
-			goto error_create;
-
-		r = amdgpu_bo_reserve(adev->fw_vram_usage.reserved_bo, false);
-		if (r)
-			goto error_reserve;
-
-		/* remove the original mem node and create a new one at the
-		 * request position
-		 */
-		bo = adev->fw_vram_usage.reserved_bo;
-		offset = ALIGN(offset, PAGE_SIZE);
-		for (i = 0; i < bo->placement.num_placement; ++i) {
-			bo->placements[i].fpfn = offset >> PAGE_SHIFT;
-			bo->placements[i].lpfn = (offset + size) >> PAGE_SHIFT;
-		}
-
-		ttm_bo_mem_put(&bo->tbo, &bo->tbo.mem);
-		r = ttm_bo_mem_space(&bo->tbo, &bo->placement,
-				     &bo->tbo.mem, &ctx);
-		if (r)
-			goto error_pin;
-
-		r = amdgpu_bo_pin_restricted(adev->fw_vram_usage.reserved_bo,
-			AMDGPU_GEM_DOMAIN_VRAM,
-			adev->fw_vram_usage.start_offset,
-			(adev->fw_vram_usage.start_offset +
-			adev->fw_vram_usage.size));
-		if (r)
-			goto error_pin;
-		r = amdgpu_bo_kmap(adev->fw_vram_usage.reserved_bo,
-			&adev->fw_vram_usage.va);
-		if (r)
-			goto error_kmap;
-
-		amdgpu_bo_unreserve(adev->fw_vram_usage.reserved_bo);
-	}
-	return r;
-
-error_kmap:
-	amdgpu_bo_unpin(adev->fw_vram_usage.reserved_bo);
-error_pin:
-	amdgpu_bo_unreserve(adev->fw_vram_usage.reserved_bo);
-error_reserve:
-	amdgpu_bo_unref(&adev->fw_vram_usage.reserved_bo);
-error_create:
-	adev->fw_vram_usage.va = NULL;
-	adev->fw_vram_usage.reserved_bo = NULL;
+	if (adev->fw_vram_usage.size == 0 ||
+	    adev->fw_vram_usage.size > vram_size)
+		return 0;
+
+	return amdgpu_bo_create_kernel_at(adev,
+					  adev->fw_vram_usage.start_offset,
+					  adev->fw_vram_usage.size,
+					  AMDGPU_GEM_DOMAIN_VRAM,
+					  &adev->fw_vram_usage.reserved_bo,
+					  &adev->fw_vram_usage.va);
 	return r;
 }
+
 /**
  * amdgpu_ttm_init - Init the memory management (ttm) as well as various
  * gtt/vram related fields.

[PATCH 5.4 126/203] drm/amdgpu/discovery: reserve discovery data at the top of VRAM

[Greg Kroah-Hartman]

From: Xiaojie Yuan <xiaojie.yuan@amd.com>

commit 5f6a556f98de425fcb7928456839a06f02156633 upstream.

IP Discovery data is TMR fenced by the latest PSP BL,
so we need to reserve this region.

Tested on navi10/12/14 with VBIOS integrated with latest PSP BL.

v2: use DISCOVERY_TMR_SIZE macro as bo size
    use amdgpu_bo_create_kernel_at() to allocate bo

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h           |    1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c |    4 ++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.h |    2 ++
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c       |   17 +++++++++++++++++
 drivers/gpu/drm/amd/include/discovery.h       |    1 -
 5 files changed, 22 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -813,6 +813,7 @@ struct amdgpu_device {
 	uint8_t				*bios;
 	uint32_t			bios_size;
 	struct amdgpu_bo		*stolen_vga_memory;
+	struct amdgpu_bo		*discovery_memory;
 	uint32_t			bios_scratch_reg_offset;
 	uint32_t			bios_scratch[AMDGPU_BIOS_NUM_SCRATCH];
 
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c
@@ -136,7 +136,7 @@ static int amdgpu_discovery_read_binary(
 {
 	uint32_t *p = (uint32_t *)binary;
 	uint64_t vram_size = (uint64_t)RREG32(mmRCC_CONFIG_MEMSIZE) << 20;
-	uint64_t pos = vram_size - BINARY_MAX_SIZE;
+	uint64_t pos = vram_size - DISCOVERY_TMR_SIZE;
 	unsigned long flags;
 
 	while (pos < vram_size) {
@@ -179,7 +179,7 @@ int amdgpu_discovery_init(struct amdgpu_
 	uint16_t checksum;
 	int r;
 
-	adev->discovery = kzalloc(BINARY_MAX_SIZE, GFP_KERNEL);
+	adev->discovery = kzalloc(DISCOVERY_TMR_SIZE, GFP_KERNEL);
 	if (!adev->discovery)
 		return -ENOMEM;
 
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.h
@@ -24,6 +24,8 @@
 #ifndef __AMDGPU_DISCOVERY__
 #define __AMDGPU_DISCOVERY__
 
+#define DISCOVERY_TMR_SIZE  (64 << 10)
+
 int amdgpu_discovery_init(struct amdgpu_device *adev);
 void amdgpu_discovery_fini(struct amdgpu_device *adev);
 int amdgpu_discovery_reg_base_init(struct amdgpu_device *adev);
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -1730,6 +1730,20 @@ int amdgpu_ttm_init(struct amdgpu_device
 				    NULL, &stolen_vga_buf);
 	if (r)
 		return r;
+
+	/*
+	 * reserve one TMR (64K) memory at the top of VRAM which holds
+	 * IP Discovery data and is protected by PSP.
+	 */
+	r = amdgpu_bo_create_kernel_at(adev,
+				       adev->gmc.real_vram_size - DISCOVERY_TMR_SIZE,
+				       DISCOVERY_TMR_SIZE,
+				       AMDGPU_GEM_DOMAIN_VRAM,
+				       &adev->discovery_memory,
+				       NULL);
+	if (r)
+		return r;
+
 	DRM_INFO("amdgpu: %uM of VRAM memory ready\n",
 		 (unsigned) (adev->gmc.real_vram_size / (1024 * 1024)));
 
@@ -1794,6 +1808,9 @@ void amdgpu_ttm_late_init(struct amdgpu_
 	void *stolen_vga_buf;
 	/* return the VGA stolen memory (if any) back to VRAM */
 	amdgpu_bo_free_kernel(&adev->stolen_vga_memory, NULL, &stolen_vga_buf);
+
+	/* return the IP Discovery TMR memory back to VRAM */
+	amdgpu_bo_free_kernel(&adev->discovery_memory, NULL, NULL);
 }
 
 /**
--- a/drivers/gpu/drm/amd/include/discovery.h
+++ b/drivers/gpu/drm/amd/include/discovery.h
@@ -25,7 +25,6 @@
 #define _DISCOVERY_H_
 
 #define PSP_HEADER_SIZE                 256
-#define BINARY_MAX_SIZE                 (64 << 10)
 #define BINARY_SIGNATURE                0x28211407
 #define DISCOVERY_TABLE_SIGNATURE       0x53445049
 

[PATCH 5.4 127/203] scsi: sd: enable compat ioctls for sed-opal

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 142b2ac82e31c174936c5719fa12ae28f51a55b7 upstream.

The sed_ioctl() function is written to be compatible between
32-bit and 64-bit processes, however compat mode is only
wired up for nvme, not for sd.

Add the missing call to sed_ioctl() in sd_compat_ioctl().

Fixes: d80210f25ff0 ("sd: add support for TCG OPAL self encrypting disks")
Cc: linux-scsi@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sd.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1694,20 +1694,30 @@ static void sd_rescan(struct device *dev
 static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
 			   unsigned int cmd, unsigned long arg)
 {
-	struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
+	struct gendisk *disk = bdev->bd_disk;
+	struct scsi_disk *sdkp = scsi_disk(disk);
+	struct scsi_device *sdev = sdkp->device;
+	void __user *p = compat_ptr(arg);
 	int error;
 
+	error = scsi_verify_blk_ioctl(bdev, cmd);
+	if (error < 0)
+		return error;
+
 	error = scsi_ioctl_block_when_processing_errors(sdev, cmd,
 			(mode & FMODE_NDELAY) != 0);
 	if (error)
 		return error;
+
+	if (is_sed_ioctl(cmd))
+		return sed_ioctl(sdkp->opal_dev, cmd, p);
 	       
 	/* 
 	 * Let the static ioctl translation table take care of it.
 	 */
 	if (!sdev->host->hostt->compat_ioctl)
 		return -ENOIOCTLCMD; 
-	return sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
+	return sdev->host->hostt->compat_ioctl(sdev, cmd, p);
 }
 #endif
 

[PATCH 5.4 128/203] arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD

[Greg Kroah-Hartman]

From: Loic Poulain <loic.poulain@linaro.org>

commit e38161bd325ea541ef2f258d8e28281077dde524 upstream.

In the same way as for msm8974-hammerhead, l21 load, used for SDCARD
VMMC, needs to be increased in order to prevent any voltage drop issues
(due to limited current) happening with some SDCARDS or during specific
operations (e.g. write).

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 660a9763c6a9 (arm64: dts: qcom: db820c: Add pm8994 regulator node)
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -623,6 +623,8 @@
 				l21 {
 					regulator-min-microvolt = <2950000>;
 					regulator-max-microvolt = <2950000>;
+					regulator-allow-set-load;
+					regulator-system-load = <200000>;
 				};
 				l22 {
 					regulator-min-microvolt = <3300000>;

[PATCH 5.4 129/203] gfs2: add compat_ioctl support

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 8d0980704842e8a68df2c3164c1c165e5c7ebc08 upstream.

Out of the four ioctl commands supported on gfs2, only FITRIM
works in compat mode.

Add a proper handler based on the ext4 implementation.

Fixes: 6ddc5c3ddf25 ("gfs2: getlabel support")
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/gfs2/file.c |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -6,6 +6,7 @@
 
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/compat.h>
 #include <linux/completion.h>
 #include <linux/buffer_head.h>
 #include <linux/pagemap.h>
@@ -354,6 +355,31 @@ static long gfs2_ioctl(struct file *filp
 	return -ENOTTY;
 }
 
+#ifdef CONFIG_COMPAT
+static long gfs2_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	switch(cmd) {
+	/* These are just misnamed, they actually get/put from/to user an int */
+	case FS_IOC32_GETFLAGS:
+		cmd = FS_IOC_GETFLAGS;
+		break;
+	case FS_IOC32_SETFLAGS:
+		cmd = FS_IOC_SETFLAGS;
+		break;
+	/* Keep this list in sync with gfs2_ioctl */
+	case FITRIM:
+	case FS_IOC_GETFSLABEL:
+		break;
+	default:
+		return -ENOIOCTLCMD;
+	}
+
+	return gfs2_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
+}
+#else
+#define gfs2_compat_ioctl NULL
+#endif
+
 /**
  * gfs2_size_hint - Give a hint to the size of a write request
  * @filep: The struct file
@@ -1294,6 +1320,7 @@ const struct file_operations gfs2_file_f
 	.write_iter	= gfs2_file_write_iter,
 	.iopoll		= iomap_dio_iopoll,
 	.unlocked_ioctl	= gfs2_ioctl,
+	.compat_ioctl	= gfs2_compat_ioctl,
 	.mmap		= gfs2_mmap,
 	.open		= gfs2_open,
 	.release	= gfs2_release,
@@ -1309,6 +1336,7 @@ const struct file_operations gfs2_file_f
 const struct file_operations gfs2_dir_fops = {
 	.iterate_shared	= gfs2_readdir,
 	.unlocked_ioctl	= gfs2_ioctl,
+	.compat_ioctl	= gfs2_compat_ioctl,
 	.open		= gfs2_open,
 	.release	= gfs2_release,
 	.fsync		= gfs2_fsync,
@@ -1325,6 +1353,7 @@ const struct file_operations gfs2_file_f
 	.write_iter	= gfs2_file_write_iter,
 	.iopoll		= iomap_dio_iopoll,
 	.unlocked_ioctl	= gfs2_ioctl,
+	.compat_ioctl	= gfs2_compat_ioctl,
 	.mmap		= gfs2_mmap,
 	.open		= gfs2_open,
 	.release	= gfs2_release,
@@ -1338,6 +1367,7 @@ const struct file_operations gfs2_file_f
 const struct file_operations gfs2_dir_fops_nolock = {
 	.iterate_shared	= gfs2_readdir,
 	.unlocked_ioctl	= gfs2_ioctl,
+	.compat_ioctl	= gfs2_compat_ioctl,
 	.open		= gfs2_open,
 	.release	= gfs2_release,
 	.fsync		= gfs2_fsync,

[PATCH 5.4 130/203] af_unix: add compat_ioctl support

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 5f6beb9e0f633f3cc845cdd67973c506372931b4 upstream.

The af_unix protocol family has a custom ioctl command (inexplicibly
based on SIOCPROTOPRIVATE), but never had a compat_ioctl handler for
32-bit applications.

Since all commands are compatible here, add a trivial wrapper that
performs the compat_ptr() conversion for SIOCOUTQ/SIOCINQ.  SIOCUNIXFILE
does not use the argument, but it doesn't hurt to also use compat_ptr()
here.

Fixes: ba94f3088b79 ("unix: add ioctl to open a unix socket file with O_PATH")
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/unix/af_unix.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -646,6 +646,9 @@ static __poll_t unix_poll(struct file *,
 static __poll_t unix_dgram_poll(struct file *, struct socket *,
 				    poll_table *);
 static int unix_ioctl(struct socket *, unsigned int, unsigned long);
+#ifdef CONFIG_COMPAT
+static int unix_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
+#endif
 static int unix_shutdown(struct socket *, int);
 static int unix_stream_sendmsg(struct socket *, struct msghdr *, size_t);
 static int unix_stream_recvmsg(struct socket *, struct msghdr *, size_t, int);
@@ -687,6 +690,9 @@ static const struct proto_ops unix_strea
 	.getname =	unix_getname,
 	.poll =		unix_poll,
 	.ioctl =	unix_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl =	unix_compat_ioctl,
+#endif
 	.listen =	unix_listen,
 	.shutdown =	unix_shutdown,
 	.setsockopt =	sock_no_setsockopt,
@@ -710,6 +716,9 @@ static const struct proto_ops unix_dgram
 	.getname =	unix_getname,
 	.poll =		unix_dgram_poll,
 	.ioctl =	unix_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl =	unix_compat_ioctl,
+#endif
 	.listen =	sock_no_listen,
 	.shutdown =	unix_shutdown,
 	.setsockopt =	sock_no_setsockopt,
@@ -732,6 +741,9 @@ static const struct proto_ops unix_seqpa
 	.getname =	unix_getname,
 	.poll =		unix_dgram_poll,
 	.ioctl =	unix_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl =	unix_compat_ioctl,
+#endif
 	.listen =	unix_listen,
 	.shutdown =	unix_shutdown,
 	.setsockopt =	sock_no_setsockopt,
@@ -2582,6 +2594,13 @@ static int unix_ioctl(struct socket *soc
 	return err;
 }
 
+#ifdef CONFIG_COMPAT
+static int unix_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+	return unix_ioctl(sock, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
+
 static __poll_t unix_poll(struct file *file, struct socket *sock, poll_table *wait)
 {
 	struct sock *sk = sock->sk;

[PATCH 5.4 131/203] compat_ioctl: handle SIOCOUTQNSD

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 9d7bf41fafa5b5ddd4c13eb39446b0045f0a8167 upstream.

Unlike the normal SIOCOUTQ, SIOCOUTQNSD was never handled in compat
mode. Add it to the common socket compat handler along with similar
ones.

Fixes: 2f4e1b397097 ("tcp: ioctl type SIOCOUTQNSD returns amount of data not sent")
Cc: Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/socket.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/socket.c
+++ b/net/socket.c
@@ -3532,6 +3532,7 @@ static int compat_sock_ioctl_trans(struc
 	case SIOCSARP:
 	case SIOCGARP:
 	case SIOCDARP:
+	case SIOCOUTQNSD:
 	case SIOCATMARK:
 		return sock_do_ioctl(net, sock, cmd, arg);
 	}

[PATCH 5.4 132/203] PCI: aardvark: Use LTSSM state to build link training flag

[Greg Kroah-Hartman]

From: Remi Pommarel <repk@triplefau.lt>

commit 364b3f1ff8f096d45f042a9c85daf7a1fc78413e upstream.

Aardvark's PCI_EXP_LNKSTA_LT flag in its link status register is not
implemented and does not reflect the actual link training state (the
flag is always set to 0). In order to support link re-training feature
this flag has to be emulated. The Link Training and Status State
Machine (LTSSM) flag in Aardvark LMI config register could be used as
a link training indicator. Indeed if the LTSSM is in L0 or upper state
then link training has completed (see [1]).

Unfortunately because after asking a link retraining it takes a while
for the LTSSM state to become less than 0x10 (due to L0s to recovery
state transition delays), LTSSM can still be in L0 while link training
has not finished yet. So this waits for link to be in recovery or lesser
state before returning after asking for a link retrain.

[1] "PCI Express Base Specification", REV. 4.0
    PCI Express, February 19 2014, Table 4-14

Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/controller/pci-aardvark.c |   29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -180,6 +180,8 @@
 #define LINK_WAIT_MAX_RETRIES		10
 #define LINK_WAIT_USLEEP_MIN		90000
 #define LINK_WAIT_USLEEP_MAX		100000
+#define RETRAIN_WAIT_MAX_RETRIES	10
+#define RETRAIN_WAIT_USLEEP_US		2000
 
 #define MSI_IRQ_NUM			32
 
@@ -239,6 +241,17 @@ static int advk_pcie_wait_for_link(struc
 	return -ETIMEDOUT;
 }
 
+static void advk_pcie_wait_for_retrain(struct advk_pcie *pcie)
+{
+	size_t retries;
+
+	for (retries = 0; retries < RETRAIN_WAIT_MAX_RETRIES; ++retries) {
+		if (!advk_pcie_link_up(pcie))
+			break;
+		udelay(RETRAIN_WAIT_USLEEP_US);
+	}
+}
+
 static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 {
 	u32 reg;
@@ -426,11 +439,20 @@ advk_pci_bridge_emul_pcie_conf_read(stru
 		return PCI_BRIDGE_EMUL_HANDLED;
 	}
 
+	case PCI_EXP_LNKCTL: {
+		/* u32 contains both PCI_EXP_LNKCTL and PCI_EXP_LNKSTA */
+		u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg) &
+			~(PCI_EXP_LNKSTA_LT << 16);
+		if (!advk_pcie_link_up(pcie))
+			val |= (PCI_EXP_LNKSTA_LT << 16);
+		*value = val;
+		return PCI_BRIDGE_EMUL_HANDLED;
+	}
+
 	case PCI_CAP_LIST_ID:
 	case PCI_EXP_DEVCAP:
 	case PCI_EXP_DEVCTL:
 	case PCI_EXP_LNKCAP:
-	case PCI_EXP_LNKCTL:
 		*value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
 		return PCI_BRIDGE_EMUL_HANDLED;
 	default:
@@ -447,8 +469,13 @@ advk_pci_bridge_emul_pcie_conf_write(str
 
 	switch (reg) {
 	case PCI_EXP_DEVCTL:
+		advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
+		break;
+
 	case PCI_EXP_LNKCTL:
 		advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
+		if (new & PCI_EXP_LNKCTL_RL)
+			advk_pcie_wait_for_retrain(pcie);
 		break;
 
 	case PCI_EXP_RTCTL:

[PATCH 5.4 133/203] PCI: aardvark: Fix PCI_EXP_RTCTL register configuration

[Greg Kroah-Hartman]

From: Remi Pommarel <repk@triplefau.lt>

commit c0f05a6ab52535c1bf5f43272eede3e11c5701a5 upstream.

PCI_EXP_RTCTL is used to activate PME interrupt only, so writing into it
should not modify other interrupts' mask. The ISR mask polarity was also
inverted, when PCI_EXP_RTCTL_PMEIE is set PCIE_MSG_PM_PME_MASK mask bit
should actually be cleared.

Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/controller/pci-aardvark.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -428,7 +428,7 @@ advk_pci_bridge_emul_pcie_conf_read(stru
 
 	case PCI_EXP_RTCTL: {
 		u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
-		*value = (val & PCIE_MSG_PM_PME_MASK) ? PCI_EXP_RTCTL_PMEIE : 0;
+		*value = (val & PCIE_MSG_PM_PME_MASK) ? 0 : PCI_EXP_RTCTL_PMEIE;
 		return PCI_BRIDGE_EMUL_HANDLED;
 	}
 
@@ -478,10 +478,15 @@ advk_pci_bridge_emul_pcie_conf_write(str
 			advk_pcie_wait_for_retrain(pcie);
 		break;
 
-	case PCI_EXP_RTCTL:
-		new = (new & PCI_EXP_RTCTL_PMEIE) << 3;
-		advk_writel(pcie, new, PCIE_ISR0_MASK_REG);
+	case PCI_EXP_RTCTL: {
+		/* Only mask/unmask PME interrupt */
+		u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG) &
+			~PCIE_MSG_PM_PME_MASK;
+		if ((new & PCI_EXP_RTCTL_PMEIE) == 0)
+			val |= PCIE_MSG_PM_PME_MASK;
+		advk_writel(pcie, val, PCIE_ISR0_MASK_REG);
 		break;
+	}
 
 	case PCI_EXP_RTSTA:
 		new = (new & PCI_EXP_RTSTA_PME) >> 9;

[PATCH 5.4 134/203] PCI: dwc: Fix find_next_bit() usage

[Greg Kroah-Hartman]

From: Niklas Cassel <niklas.cassel@linaro.org>

commit 1137e61dcb99f7f8b54e77ed83f68b5b485a3e34 upstream.

find_next_bit() takes a parameter of size long, and performs arithmetic
that assumes that the argument is of size long.

Therefore we cannot pass a u32, since this will cause find_next_bit()
to read outside the stack buffer and will produce the following print:
BUG: KASAN: stack-out-of-bounds in find_next_bit+0x38/0xb0

Fixes: 1b497e6493c4 ("PCI: dwc: Fix uninitialized variable in dw_handle_msi_irq()")
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/controller/dwc/pcie-designware-host.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -78,7 +78,8 @@ static struct msi_domain_info dw_pcie_ms
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 {
 	int i, pos, irq;
-	u32 val, num_ctrls;
+	unsigned long val;
+	u32 status, num_ctrls;
 	irqreturn_t ret = IRQ_NONE;
 
 	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
@@ -86,14 +87,14 @@ irqreturn_t dw_handle_msi_irq(struct pci
 	for (i = 0; i < num_ctrls; i++) {
 		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS +
 					(i * MSI_REG_CTRL_BLOCK_SIZE),
-				    4, &val);
-		if (!val)
+				    4, &status);
+		if (!status)
 			continue;
 
 		ret = IRQ_HANDLED;
+		val = status;
 		pos = 0;
-		while ((pos = find_next_bit((unsigned long *) &val,
-					    MAX_MSI_IRQS_PER_CTRL,
+		while ((pos = find_next_bit(&val, MAX_MSI_IRQS_PER_CTRL,
 					    pos)) != MAX_MSI_IRQS_PER_CTRL) {
 			irq = irq_find_mapping(pp->irq_domain,
 					       (i * MAX_MSI_IRQS_PER_CTRL) +

[PATCH 5.4 135/203] PCI: Fix missing bridge dma_ranges resource list cleanup

[Greg Kroah-Hartman]

From: Rob Herring <robh@kernel.org>

commit 7608158df3ed87a5c938c4a0b91f5b11101a9be1 upstream.

Commit e80a91ad302b ("PCI: Add dma_ranges window list") added a
dma_ranges resource list, but failed to correctly free the list when
devm_pci_alloc_host_bridge() is used.

Only the iproc host bridge driver is using the dma_ranges list.

Fixes: e80a91ad302b ("PCI: Add dma_ranges window list")
Link: https://lore.kernel.org/r/20191008012325.25700-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/probe.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -572,6 +572,7 @@ static void devm_pci_release_host_bridge
 		bridge->release_fn(bridge);
 
 	pci_free_resource_list(&bridge->windows);
+	pci_free_resource_list(&bridge->dma_ranges);
 }
 
 static void pci_release_host_bridge_dev(struct device *dev)

[PATCH 5.4 136/203] PCI/PM: Clear PCIe PME Status even for legacy power management

[Greg Kroah-Hartman]

From: Bjorn Helgaas <bhelgaas@google.com>

commit ec6a75ef8e33fe33f963b916fd902c52a0be33ff upstream.

Previously, pci_pm_resume_noirq() cleared the PME Status bit in the Root
Status register only if the device had no driver or the driver did not
implement legacy power management.  It should clear PME Status regardless
of what sort of power management the driver supports, so do this before
checking for legacy power management.

This affects Root Ports and Root Complex Event Collectors, for which the
usual driver is the PCIe portdrv, which implements new power management, so
this change is just on principle, not to fix any actual defects.

Fixes: a39bd851dccf ("PCI/PM: Clear PCIe PME Status bit in core, not PCIe port driver")
Link: https://lore.kernel.org/r/20191014230016.240912-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pci-driver.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -941,12 +941,11 @@ static int pci_pm_resume_noirq(struct de
 		pci_pm_default_resume_early(pci_dev);
 
 	pci_fixup_device(pci_fixup_resume_early, pci_dev);
+	pcie_pme_root_status_cleanup(pci_dev);
 
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
 
-	pcie_pme_root_status_cleanup(pci_dev);
-
 	if (drv && drv->pm && drv->pm->resume_noirq)
 		error = drv->pm->resume_noirq(dev);
 

[PATCH 5.4 137/203] tools: PCI: Fix fd leakage

[Greg Kroah-Hartman]

From: Hewenliang <hewenliang4@huawei.com>

commit 3c379a59b4795d7279d38c623e74b9790345a32b upstream.

We should close fd before the return of run_test.

Fixes: 3f2ed8134834 ("tools: PCI: Add a userspace tool to test PCI endpoint")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/pci/pcitest.c |    1 +
 1 file changed, 1 insertion(+)

--- a/tools/pci/pcitest.c
+++ b/tools/pci/pcitest.c
@@ -129,6 +129,7 @@ static int run_test(struct pci_test *tes
 	}
 
 	fflush(stdout);
+	close(fd);
 	return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */
 }
 

[PATCH 5.4 138/203] PCI/PTM: Remove spurious "d" from granularity message

[Greg Kroah-Hartman]

From: Bjorn Helgaas <bhelgaas@google.com>

commit 127a7709495db52a41012deaebbb7afc231dad91 upstream.

The granularity message has an extra "d":

  pci 0000:02:00.0: PTM enabled, 4dns granularity

Remove the "d" so the message is simply "PTM enabled, 4ns granularity".

Fixes: 8b2ec318eece ("PCI: Add PTM clock granularity information")
Link: https://lore.kernel.org/r/20191106222420.10216-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Cc: Jonathan Yong <jonathan.yong@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pcie/ptm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/pcie/ptm.c
+++ b/drivers/pci/pcie/ptm.c
@@ -21,7 +21,7 @@ static void pci_ptm_info(struct pci_dev
 		snprintf(clock_desc, sizeof(clock_desc), ">254ns");
 		break;
 	default:
-		snprintf(clock_desc, sizeof(clock_desc), "%udns",
+		snprintf(clock_desc, sizeof(clock_desc), "%uns",
 			 dev->ptm_granularity);
 		break;
 	}

[PATCH 5.4 139/203] powerpc/powernv: Disable native PCIe port management

[Greg Kroah-Hartman]

From: Oliver O'Halloran <oohall@gmail.com>

commit 9d72dcef891030545f39ad386a30cf91df517fb2 upstream.

On PowerNV the PCIe topology is (currently) managed by the powernv platform
code in Linux in cooperation with the platform firmware. Linux's native
PCIe port service drivers operate independently of both and this can cause
problems.

The main issue is that the portbus driver will conflict with the platform
specific hotplug driver (pnv_php) over ownership of the MSI used to notify
the host when a hotplug event occurs. The portbus driver claims this MSI on
behalf of the individual port services because the same interrupt is used
for hotplug events, PMEs (on root ports), and link bandwidth change
notifications. The portbus driver will always claim the interrupt even if
the individual port service drivers, such as pciehp, are compiled out.

The second, bigger, problem is that the hotplug port service driver
fundamentally does not work on PowerNV. The platform assumes that all
PCI devices have a corresponding arch-specific handle derived from the DT
node for the device (pci_dn) and without one the platform will not allow
a PCI device to be enabled. This problem is largely due to historical
baggage, but it can't be resolved without significant re-factoring of the
platform PCI support.

We can fix these problems in the interim by setting the
"pcie_ports_disabled" flag during platform initialisation. The flag
indicates the platform owns the PCIe ports which stops the portbus driver
from being registered.

This does have the side effect of disabling all port services drivers
that is: AER, PME, BW notifications, hotplug, and DPC. However, this is
not a huge disadvantage on PowerNV since these services are either unused
or handled through other means.

Fixes: 66725152fb9f ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191118065553.30362-1-oohall@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/powernv/pci.c |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -945,6 +945,23 @@ void __init pnv_pci_init(void)
 	if (!firmware_has_feature(FW_FEATURE_OPAL))
 		return;
 
+#ifdef CONFIG_PCIEPORTBUS
+	/*
+	 * On PowerNV PCIe devices are (currently) managed in cooperation
+	 * with firmware. This isn't *strictly* required, but there's enough
+	 * assumptions baked into both firmware and the platform code that
+	 * it's unwise to allow the portbus services to be used.
+	 *
+	 * We need to fix this eventually, but for now set this flag to disable
+	 * the portbus driver. The AER service isn't required since that AER
+	 * events are handled via EEH. The pciehp hotplug driver can't work
+	 * without kernel changes (and portbus binding breaks pnv_php). The
+	 * other services also require some thinking about how we're going
+	 * to integrate them.
+	 */
+	pcie_ports_disabled = true;
+#endif
+
 	/* Look for IODA IO-Hubs. */
 	for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
 		pnv_pci_init_ioda_hub(np);

[PATCH 5.4 140/203] MIPS: PCI: remember nasid changed by set interrupt affinity

[Greg Kroah-Hartman]

From: Thomas Bogendoerfer <tbogendoerfer@suse.de>

commit 37640adbefd66491cb8083a438f7bf366ac09bc7 upstream.

When changing interrupt affinity remember the possible changed nasid,
otherwise an interrupt deactivate/activate sequence will incorrectly
setup interrupt.

Fixes: e6308b6d35ea ("MIPS: SGI-IP27: abstract chipset irq from bridge")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/pci/pci-xtalk-bridge.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/arch/mips/pci/pci-xtalk-bridge.c
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -279,16 +279,15 @@ static int bridge_set_affinity(struct ir
 	struct bridge_irq_chip_data *data = d->chip_data;
 	int bit = d->parent_data->hwirq;
 	int pin = d->hwirq;
-	nasid_t nasid;
 	int ret, cpu;
 
 	ret = irq_chip_set_affinity_parent(d, mask, force);
 	if (ret >= 0) {
 		cpu = cpumask_first_and(mask, cpu_online_mask);
-		nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+		data->nnasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
 		bridge_write(data->bc, b_int_addr[pin].addr,
 			     (((data->bc->intr_addr >> 30) & 0x30000) |
-			      bit | (nasid << 8)));
+			      bit | (data->nasid << 8)));
 		bridge_read(data->bc, b_wid_tflush);
 	}
 	return ret;

[PATCH 5.4 141/203] MIPS: Loongson: Fix return value of loongson_hwmon_init

[Greg Kroah-Hartman]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

commit dece3c2a320b0a6d891da6ff774ab763969b6860 upstream.

When call function hwmon_device_register failed, use the actual
return value instead of always -ENOMEM.

Fixes: 64f09aa967e1 ("MIPS: Loongson-3: Add CPU Hwmon platform driver")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/platform/mips/cpu_hwmon.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/platform/mips/cpu_hwmon.c
+++ b/drivers/platform/mips/cpu_hwmon.c
@@ -161,7 +161,7 @@ static int __init loongson_hwmon_init(vo
 
 	cpu_hwmon_dev = hwmon_device_register(NULL);
 	if (IS_ERR(cpu_hwmon_dev)) {
-		ret = -ENOMEM;
+		ret = PTR_ERR(cpu_hwmon_dev);
 		pr_err("hwmon_device_register fail!\n");
 		goto fail_hwmon_device_register;
 	}

[PATCH 5.4 142/203] MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter

[Greg Kroah-Hartman]

From: Thomas Bogendoerfer <tbogendoerfer@suse.de>

commit e3d765a941f6130fd94e47b2064cfee71f4cbadd upstream.

If number of CPUs are limited by the kernel commandline parameter nr_cpus
assignment of interrupts accourding to numa rules might not be possibe.
As a fallback use one of the online CPUs as interrupt destination.

Fixes: 69a07a41d908 ("MIPS: SGI-IP27: rework HUB interrupts")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/sgi-ip27/ip27-irq.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -73,6 +73,9 @@ static void setup_hub_mask(struct hub_ir
 	int cpu;
 
 	cpu = cpumask_first_and(mask, cpu_online_mask);
+	if (cpu >= nr_cpu_ids)
+		cpu = cpumask_any(cpu_online_mask);
+
 	nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
 	hd->cpu = cpu;
 	if (!cputoslice(cpu)) {
@@ -139,6 +142,7 @@ static int hub_domain_alloc(struct irq_d
 	/* use CPU connected to nearest hub */
 	hub = hub_data(NASID_TO_COMPACT_NODEID(info->nasid));
 	setup_hub_mask(hd, &hub->h_cpus);
+	info->nasid = cpu_to_node(hd->cpu);
 
 	/* Make sure it's not already pending when we connect it. */
 	REMOTE_HUB_CLR_INTR(info->nasid, swlevel);

[PATCH 5.4 143/203] tty: serial: imx: use the sg count from dma_map_sg

[Greg Kroah-Hartman]

From: Peng Fan <peng.fan@nxp.com>

commit 596fd8dffb745afcebc0ec6968e17fe29f02044c upstream.

The dmaengine_prep_slave_sg needs to use sg count returned
by dma_map_sg, not use sport->dma_tx_nents, because the return
value of dma_map_sg is not always same with "nents".

Fixes: b4cdc8f61beb ("serial: imx: add DMA support for imx6q")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1573108875-26530-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/imx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -619,7 +619,7 @@ static void imx_uart_dma_tx(struct imx_p
 		dev_err(dev, "DMA mapping error for TX.\n");
 		return;
 	}
-	desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents,
+	desc = dmaengine_prep_slave_sg(chan, sgl, ret,
 					DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
 	if (!desc) {
 		dma_unmap_sg(dev, sgl, sport->dma_tx_nents,

[PATCH 5.4 144/203] tty: serial: pch_uart: correct usage of dma_unmap_sg

[Greg Kroah-Hartman]

From: Peng Fan <peng.fan@nxp.com>

commit 74887542fdcc92ad06a48c0cca17cdf09fc8aa00 upstream.

Per Documentation/DMA-API-HOWTO.txt,
To unmap a scatterlist, just call:
	dma_unmap_sg(dev, sglist, nents, direction);

.. note::

	The 'nents' argument to the dma_unmap_sg call must be
	the _same_ one you passed into the dma_map_sg call,
	it should _NOT_ be the 'count' value _returned_ from the
	dma_map_sg call.

However in the driver, priv->nent is directly assigned with value
returned from dma_map_sg, and dma_unmap_sg use priv->nent for unmap,
this breaks the API usage.

So introduce a new entry orig_nent to remember 'nents'.

Fixes: da3564ee027e ("pch_uart: add multi-scatter processing")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1573623259-6339-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/pch_uart.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -233,6 +233,7 @@ struct eg20t_port {
 	struct dma_chan			*chan_rx;
 	struct scatterlist		*sg_tx_p;
 	int				nent;
+	int				orig_nent;
 	struct scatterlist		sg_rx;
 	int				tx_dma_use;
 	void				*rx_buf_virt;
@@ -787,9 +788,10 @@ static void pch_dma_tx_complete(void *ar
 	}
 	xmit->tail &= UART_XMIT_SIZE - 1;
 	async_tx_ack(priv->desc_tx);
-	dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE);
+	dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE);
 	priv->tx_dma_use = 0;
 	priv->nent = 0;
+	priv->orig_nent = 0;
 	kfree(priv->sg_tx_p);
 	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
 }
@@ -1010,6 +1012,7 @@ static unsigned int dma_handle_tx(struct
 		dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
 		return 0;
 	}
+	priv->orig_nent = num;
 	priv->nent = nent;
 
 	for (i = 0; i < nent; i++, sg++) {

[PATCH 5.4 145/203] ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MC

[Greg Kroah-Hartman]

From: Dietmar Eggemann <dietmar.eggemann@arm.com>

commit ff98a5f624d2910de050f1fc7f2a32769da86b51 upstream.

Commit ca74b316df96 ("arm: Use common cpu_topology structure and
functions.") changed cpu_coregroup_mask() from the ARM32 specific
implementation in arch/arm/include/asm/topology.h to the one shared
with ARM64 and RISCV in drivers/base/arch_topology.c.

Currently on ARM32 (TC2 w/ CONFIG_SCHED_MC) the task scheduler setup
code (w/ CONFIG_SCHED_DEBUG) shows this during CPU hotplug:

  ERROR: groups don't span domain->span

It happens to CPUs of the cluster of the CPU which gets hot-plugged
out on scheduler domain MC.

Turns out that the shared cpu_coregroup_mask() requires that the
hot-plugged CPU is removed from the core_sibling mask via
remove_cpu_topology(). Otherwise the 'is core_sibling subset of
cpumask_of_node()' doesn't work. In this case the task scheduler has to
deal with cpumask_of_node instead of core_sibling which is wrong on
scheduler domain MC.

e.g. CPU3 hot-plugged out on TC2 [cluster0: 0,3-4 cluster1: 1-2]:

  cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,3-4
                                                                  ^
should be:

  cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,4

Add remove_cpu_topology() to __cpu_disable() to remove the CPU from the
topology masks in case of a CPU hotplug out operation.

At the same time tweak store_cpu_topology() slightly so it will call
update_siblings_masks() in case of CPU hotplug in operation via
secondary_start_kernel()->smp_store_cpu_info().

This aligns the ARM32 implementation with the ARM64 one.

Guarding remove_cpu_topology() with CONFIG_GENERIC_ARCH_TOPOLOGY is
necessary since some Arm32 defconfigs (aspeed_g5_defconfig,
milbeaut_m10v_defconfig, spear13xx_defconfig) specify an explicit

 # CONFIG_ARM_CPU_TOPOLOGY is not set

w/ ./arch/arm/Kconfig: select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY

Fixes: ca74b316df96 ("arm: Use common cpu_topology structure and functions")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kernel/smp.c      |    4 ++++
 arch/arm/kernel/topology.c |   10 +++++-----
 2 files changed, 9 insertions(+), 5 deletions(-)

--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -240,6 +240,10 @@ int __cpu_disable(void)
 	if (ret)
 		return ret;
 
+#ifdef CONFIG_GENERIC_ARCH_TOPOLOGY
+	remove_cpu_topology(cpu);
+#endif
+
 	/*
 	 * Take this CPU offline.  Once we clear this, we can't return,
 	 * and we must not schedule until we're ready to give up the cpu.
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -196,9 +196,8 @@ void store_cpu_topology(unsigned int cpu
 	struct cpu_topology *cpuid_topo = &cpu_topology[cpuid];
 	unsigned int mpidr;
 
-	/* If the cpu topology has been already set, just return */
-	if (cpuid_topo->core_id != -1)
-		return;
+	if (cpuid_topo->package_id != -1)
+		goto topology_populated;
 
 	mpidr = read_cpuid_mpidr();
 
@@ -231,14 +230,15 @@ void store_cpu_topology(unsigned int cpu
 		cpuid_topo->package_id = -1;
 	}
 
-	update_siblings_masks(cpuid);
-
 	update_cpu_capacity(cpuid);
 
 	pr_info("CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
 		cpuid, cpu_topology[cpuid].thread_id,
 		cpu_topology[cpuid].core_id,
 		cpu_topology[cpuid].package_id, mpidr);
+
+topology_populated:
+	update_siblings_masks(cpuid);
 }
 
 static inline int cpu_corepower_flags(void)

[PATCH 5.4 146/203] media: ov6650: Fix incorrect use of JPEG colorspace

[Greg Kroah-Hartman]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

commit 12500731895ef09afc5b66b86b76c0884fb9c7bf upstream.

Since its initial submission, the driver selects V4L2_COLORSPACE_JPEG
for supported formats other than V4L2_MBUS_FMT_SBGGR8_1X8.  According
to v4l2-compliance test program, V4L2_COLORSPACE_JPEG applies
exclusively to V4L2_PIX_FMT_JPEG.  Since the sensor does not support
JPEG format, fix it to always select V4L2_COLORSPACE_SRGB.

Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/i2c/ov6650.c |   13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -201,7 +201,6 @@ struct ov6650 {
 	unsigned long		pclk_max;	/* from resolution and format */
 	struct v4l2_fract	tpf;		/* as requested with s_frame_interval */
 	u32 code;
-	enum v4l2_colorspace	colorspace;
 };
 
 
@@ -517,7 +516,7 @@ static int ov6650_get_fmt(struct v4l2_su
 	mf->width	= priv->rect.width >> priv->half_scale;
 	mf->height	= priv->rect.height >> priv->half_scale;
 	mf->code	= priv->code;
-	mf->colorspace	= priv->colorspace;
+	mf->colorspace	= V4L2_COLORSPACE_SRGB;
 	mf->field	= V4L2_FIELD_NONE;
 
 	return 0;
@@ -624,11 +623,6 @@ static int ov6650_s_fmt(struct v4l2_subd
 		priv->pclk_max = 8000000;
 	}
 
-	if (code == MEDIA_BUS_FMT_SBGGR8_1X8)
-		priv->colorspace = V4L2_COLORSPACE_SRGB;
-	else if (code != 0)
-		priv->colorspace = V4L2_COLORSPACE_JPEG;
-
 	if (half_scale) {
 		dev_dbg(&client->dev, "max resolution: QCIF\n");
 		coma_set |= COMA_QCIF;
@@ -663,7 +657,6 @@ static int ov6650_s_fmt(struct v4l2_subd
 		priv->code = code;
 
 	if (!ret) {
-		mf->colorspace	= priv->colorspace;
 		mf->width = priv->rect.width >> half_scale;
 		mf->height = priv->rect.height >> half_scale;
 	}
@@ -686,6 +679,7 @@ static int ov6650_set_fmt(struct v4l2_su
 				&mf->height, 2, H_CIF, 1, 0);
 
 	mf->field = V4L2_FIELD_NONE;
+	mf->colorspace = V4L2_COLORSPACE_SRGB;
 
 	switch (mf->code) {
 	case MEDIA_BUS_FMT_Y10_1X10:
@@ -696,13 +690,11 @@ static int ov6650_set_fmt(struct v4l2_su
 	case MEDIA_BUS_FMT_YUYV8_2X8:
 	case MEDIA_BUS_FMT_VYUY8_2X8:
 	case MEDIA_BUS_FMT_UYVY8_2X8:
-		mf->colorspace = V4L2_COLORSPACE_JPEG;
 		break;
 	default:
 		mf->code = MEDIA_BUS_FMT_SBGGR8_1X8;
 		/* fall through */
 	case MEDIA_BUS_FMT_SBGGR8_1X8:
-		mf->colorspace = V4L2_COLORSPACE_SRGB;
 		break;
 	}
 
@@ -1008,7 +1000,6 @@ static int ov6650_probe(struct i2c_clien
 	priv->rect.height = H_CIF;
 	priv->half_scale  = false;
 	priv->code	  = MEDIA_BUS_FMT_YUYV8_2X8;
-	priv->colorspace  = V4L2_COLORSPACE_JPEG;
 
 	/* Hardware default frame interval */
 	priv->tpf.numerator   = GET_CLKRC_DIV(DEF_CLKRC);

[PATCH 5.4 147/203] media: ov6650: Fix some format attributes not under control

[Greg Kroah-Hartman]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

commit 1c6a2b63095154bbf9e8f38d79487a728331bf65 upstream.

User arguments passed to .get/set_fmt() pad operation callbacks may
contain unsupported values.  The driver takes control over frame size
and pixel code as well as colorspace and field attributes but has never
cared for remainig format attributes, i.e., ycbcr_enc, quantization
and xfer_func, introduced by commit 11ff030c7365 ("[media]
v4l2-mediabus: improve colorspace support").  Fix it.

Set up a static v4l2_mbus_framefmt structure with attributes
initialized to reasonable defaults and use it for updating content of
user provided arguments.  In case of V4L2_SUBDEV_FORMAT_ACTIVE,
postpone frame size update, now performed from inside ov6650_s_fmt()
helper, util the user argument is first updated in ov6650_set_fmt() with
default frame format content.  For V4L2_SUBDEV_FORMAT_TRY, don't copy
all attributes to pad config, only those handled by the driver, then
fill the response with the default frame format updated with resulting
pad config format code and frame size.

Fixes: 11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/i2c/ov6650.c |   51 ++++++++++++++++++++++++++++++++++-----------
 1 file changed, 39 insertions(+), 12 deletions(-)

--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -213,6 +213,17 @@ static u32 ov6650_codes[] = {
 	MEDIA_BUS_FMT_Y8_1X8,
 };
 
+static const struct v4l2_mbus_framefmt ov6650_def_fmt = {
+	.width		= W_CIF,
+	.height		= H_CIF,
+	.code		= MEDIA_BUS_FMT_SBGGR8_1X8,
+	.colorspace	= V4L2_COLORSPACE_SRGB,
+	.field		= V4L2_FIELD_NONE,
+	.ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT,
+	.quantization	= V4L2_QUANTIZATION_DEFAULT,
+	.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
+};
+
 /* read a register */
 static int ov6650_reg_read(struct i2c_client *client, u8 reg, u8 *val)
 {
@@ -513,11 +524,13 @@ static int ov6650_get_fmt(struct v4l2_su
 	if (format->pad)
 		return -EINVAL;
 
+	/* initialize response with default media bus frame format */
+	*mf = ov6650_def_fmt;
+
+	/* update media bus format code and frame size */
 	mf->width	= priv->rect.width >> priv->half_scale;
 	mf->height	= priv->rect.height >> priv->half_scale;
 	mf->code	= priv->code;
-	mf->colorspace	= V4L2_COLORSPACE_SRGB;
-	mf->field	= V4L2_FIELD_NONE;
 
 	return 0;
 }
@@ -656,10 +669,6 @@ static int ov6650_s_fmt(struct v4l2_subd
 	if (!ret)
 		priv->code = code;
 
-	if (!ret) {
-		mf->width = priv->rect.width >> half_scale;
-		mf->height = priv->rect.height >> half_scale;
-	}
 	return ret;
 }
 
@@ -678,9 +687,6 @@ static int ov6650_set_fmt(struct v4l2_su
 		v4l_bound_align_image(&mf->width, 2, W_CIF, 1,
 				&mf->height, 2, H_CIF, 1, 0);
 
-	mf->field = V4L2_FIELD_NONE;
-	mf->colorspace = V4L2_COLORSPACE_SRGB;
-
 	switch (mf->code) {
 	case MEDIA_BUS_FMT_Y10_1X10:
 		mf->code = MEDIA_BUS_FMT_Y8_1X8;
@@ -698,10 +704,31 @@ static int ov6650_set_fmt(struct v4l2_su
 		break;
 	}
 
-	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		return ov6650_s_fmt(sd, mf);
-	cfg->try_fmt = *mf;
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+		/* store media bus format code and frame size in pad config */
+		cfg->try_fmt.width = mf->width;
+		cfg->try_fmt.height = mf->height;
+		cfg->try_fmt.code = mf->code;
+
+		/* return default mbus frame format updated with pad config */
+		*mf = ov6650_def_fmt;
+		mf->width = cfg->try_fmt.width;
+		mf->height = cfg->try_fmt.height;
+		mf->code = cfg->try_fmt.code;
+
+	} else {
+		/* apply new media bus format code and frame size */
+		int ret = ov6650_s_fmt(sd, mf);
 
+		if (ret)
+			return ret;
+
+		/* return default format updated with active size and code */
+		*mf = ov6650_def_fmt;
+		mf->width = priv->rect.width >> priv->half_scale;
+		mf->height = priv->rect.height >> priv->half_scale;
+		mf->code = priv->code;
+	}
 	return 0;
 }
 

[PATCH 5.4 148/203] media: ov6650: Fix .get_fmt() V4L2_SUBDEV_FORMAT_TRY support

[Greg Kroah-Hartman]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

commit 39034bb0c26b76a2c3abc54aa28c185f18b40c2f upstream.

Commit da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad
op get_fmt") converted a former ov6650_g_fmt() video operation callback
to an ov6650_get_fmt() pad operation callback.  However, the converted
function disregards a format->which flag that pad operations should
obey and always returns active frame format settings.

That can be fixed by always responding to V4L2_SUBDEV_FORMAT_TRY with
-EINVAL, or providing the response from a pad config argument, likely
updated by a former user call to V4L2_SUBDEV_FORMAT_TRY .set_fmt().
Since implementation of the latter is trivial, go for it.

Fixes: da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/i2c/ov6650.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -528,10 +528,16 @@ static int ov6650_get_fmt(struct v4l2_su
 	*mf = ov6650_def_fmt;
 
 	/* update media bus format code and frame size */
-	mf->width	= priv->rect.width >> priv->half_scale;
-	mf->height	= priv->rect.height >> priv->half_scale;
-	mf->code	= priv->code;
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
+		mf->width = cfg->try_fmt.width;
+		mf->height = cfg->try_fmt.height;
+		mf->code = cfg->try_fmt.code;
 
+	} else {
+		mf->width = priv->rect.width >> priv->half_scale;
+		mf->height = priv->rect.height >> priv->half_scale;
+		mf->code = priv->code;
+	}
 	return 0;
 }
 

[PATCH 5.4 149/203] media: ov6650: Fix default format not applied on device probe

[Greg Kroah-Hartman]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

commit 5439fa9263cb293e41168bc03711ec18c4f11cba upstream.

It is not clear what pixel format is actually configured in hardware on
reset.  MEDIA_BUS_FMT_YUYV8_2X8, assumed on device probe since the
driver was intiially submitted, is for sure not the one.

Fix it by explicitly applying a known, driver default frame format just
after initial device reset.

Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/i2c/ov6650.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -877,6 +877,11 @@ static int ov6650_video_probe(struct v4l
 	ret = ov6650_reset(client);
 	if (!ret)
 		ret = ov6650_prog_dflt(client);
+	if (!ret) {
+		struct v4l2_mbus_framefmt mf = ov6650_def_fmt;
+
+		ret = ov6650_s_fmt(sd, &mf);
+	}
 	if (!ret)
 		ret = v4l2_ctrl_handler_setup(&priv->hdl);
 
@@ -1031,8 +1036,6 @@ static int ov6650_probe(struct i2c_clien
 	priv->rect.top	  = DEF_VSTRT << 1;
 	priv->rect.width  = W_CIF;
 	priv->rect.height = H_CIF;
-	priv->half_scale  = false;
-	priv->code	  = MEDIA_BUS_FMT_YUYV8_2X8;
 
 	/* Hardware default frame interval */
 	priv->tpf.numerator   = GET_CLKRC_DIV(DEF_CLKRC);

[PATCH 5.4 150/203] media: rcar-vin: Fix incorrect return statement in rvin_try_format()

[Greg Kroah-Hartman]

From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

commit a0862a40364e2f87109317e31c51c9d7bc89e33f upstream.

While refactoring code the return statement became corrupted, fix it by
returning the correct return code.

Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Fixes: 897e371389e77514 ("media: rcar-vin: simplify how formats are set and reset"
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/platform/rcar-vin/rcar-v4l2.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -208,6 +208,7 @@ static int rvin_try_format(struct rvin_d
 	ret = v4l2_subdev_call(sd, pad, set_fmt, pad_cfg, &format);
 	if (ret < 0 && ret != -ENOIOCTLCMD)
 		goto done;
+	ret = 0;
 
 	v4l2_fill_pix_format(pix, &format.format);
 
@@ -242,7 +243,7 @@ static int rvin_try_format(struct rvin_d
 done:
 	v4l2_subdev_free_pad_config(pad_cfg);
 
-	return 0;
+	return ret;
 }
 
 static int rvin_querycap(struct file *file, void *priv,

[PATCH 5.4 151/203] media: hantro: h264: Fix the frame_num wraparound case

[Greg Kroah-Hartman]

From: Boris Brezillon <boris.brezillon@collabora.com>

commit 9db5f87f6723678a7e7e5e3165439c5c4378edbb upstream.

Step '8.2.4.1 Decoding process for picture numbers' was missing in the
reflist creation logic, leading to invalid P reflists when a
->frame_num wraparound happens.

Fixes: a9471e25629b ("media: hantro: Add core bits to support H264 decoding")
Reported-by: Francois Buergisser <fbuergisser@google.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Francois Buergisser <fbuergisser@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/media/hantro/hantro_h264.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

--- a/drivers/staging/media/hantro/hantro_h264.c
+++ b/drivers/staging/media/hantro/hantro_h264.c
@@ -271,6 +271,7 @@ struct hantro_h264_reflist_builder {
 	const struct v4l2_h264_dpb_entry *dpb;
 	s32 pocs[HANTRO_H264_DPB_SIZE];
 	u8 unordered_reflist[HANTRO_H264_DPB_SIZE];
+	int frame_nums[HANTRO_H264_DPB_SIZE];
 	s32 curpoc;
 	u8 num_valid;
 };
@@ -294,13 +295,20 @@ static void
 init_reflist_builder(struct hantro_ctx *ctx,
 		     struct hantro_h264_reflist_builder *b)
 {
+	const struct v4l2_ctrl_h264_slice_params *slice_params;
 	const struct v4l2_ctrl_h264_decode_params *dec_param;
+	const struct v4l2_ctrl_h264_sps *sps;
 	struct vb2_v4l2_buffer *buf = hantro_get_dst_buf(ctx);
 	const struct v4l2_h264_dpb_entry *dpb = ctx->h264_dec.dpb;
 	struct vb2_queue *cap_q = &ctx->fh.m2m_ctx->cap_q_ctx.q;
+	int cur_frame_num, max_frame_num;
 	unsigned int i;
 
 	dec_param = ctx->h264_dec.ctrls.decode;
+	slice_params = &ctx->h264_dec.ctrls.slices[0];
+	sps = ctx->h264_dec.ctrls.sps;
+	max_frame_num = 1 << (sps->log2_max_frame_num_minus4 + 4);
+	cur_frame_num = slice_params->frame_num;
 
 	memset(b, 0, sizeof(*b));
 	b->dpb = dpb;
@@ -318,6 +326,18 @@ init_reflist_builder(struct hantro_ctx *
 			continue;
 
 		buf = to_vb2_v4l2_buffer(vb2_get_buffer(cap_q, buf_idx));
+
+		/*
+		 * Handle frame_num wraparound as described in section
+		 * '8.2.4.1 Decoding process for picture numbers' of the spec.
+		 * TODO: This logic will have to be adjusted when we start
+		 * supporting interlaced content.
+		 */
+		if (dpb[i].frame_num > cur_frame_num)
+			b->frame_nums[i] = (int)dpb[i].frame_num - max_frame_num;
+		else
+			b->frame_nums[i] = dpb[i].frame_num;
+
 		b->pocs[i] = get_poc(buf->field, dpb[i].top_field_order_cnt,
 				     dpb[i].bottom_field_order_cnt);
 		b->unordered_reflist[b->num_valid] = i;
@@ -353,7 +373,7 @@ static int p_ref_list_cmp(const void *pt
 	 * ascending order.
 	 */
 	if (!(a->flags & V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM))
-		return b->frame_num - a->frame_num;
+		return builder->frame_nums[idxb] - builder->frame_nums[idxa];
 
 	return a->pic_num - b->pic_num;
 }

[PATCH 5.4 152/203] media: v4l: cadence: Fix how unsued lanes are handled in csi2rx_start()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit 2eca8e4c1df4864b937752c3aa2f7925114f4806 upstream.

The 2nd parameter of 'find_first_zero_bit()' is a number of bits, not of
bytes. So use 'csi2rx->max_lanes' instead of 'sizeof(lanes_used)'.

Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/platform/cadence/cdns-csi2rx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c
@@ -129,7 +129,7 @@ static int csi2rx_start(struct csi2rx_pr
 	 */
 	for (i = csi2rx->num_lanes; i < csi2rx->max_lanes; i++) {
 		unsigned int idx = find_first_zero_bit(&lanes_used,
-						       sizeof(lanes_used));
+						       csi2rx->max_lanes);
 		set_bit(idx, &lanes_used);
 		reg |= CSI2RX_STATIC_CFG_DLANE_MAP(i, i + 1);
 	}

[PATCH 5.4 153/203] media: exynos4-is: Fix recursive locking in isp_video_release()

[Greg Kroah-Hartman]

From: Seung-Woo Kim <sw0312.kim@samsung.com>

commit 704c6c80fb471d1bb0ef0d61a94617d1d55743cd upstream.

>From isp_video_release(), &isp->video_lock is held and subsequent
vb2_fop_release() tries to lock vdev->lock which is same with the
previous one. Replace vb2_fop_release() with _vb2_fop_release() to
fix the recursive locking.

Fixes: 1380f5754cb0 ("[media] videobuf2: Add missing lock held on vb2_fop_release")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/platform/exynos4-is/fimc-isp-video.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/platform/exynos4-is/fimc-isp-video.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c
@@ -313,7 +313,7 @@ static int isp_video_release(struct file
 		ivc->streaming = 0;
 	}
 
-	vb2_fop_release(file);
+	_vb2_fop_release(file, NULL);
 
 	if (v4l2_fh_is_singular_file(file)) {
 		fimc_pipeline_call(&ivc->ve, close);

[PATCH 5.4 154/203] media: coda: fix deadlock between decoder picture run and start command

[Greg Kroah-Hartman]

From: Philipp Zabel <p.zabel@pengutronix.de>

commit a3fd80198de6ab98a205cf7fb148d88e9e1c44bb upstream.

The BIT decoder picture run temporarily locks the bitstream mutex while
the coda device mutex is locked, to refill the bitstream ring buffer.
Consequently, the decoder start command, which locks both mutexes when
flushing the bitstream ring buffer, must lock the coda device mutex
first as well, to avoid an ABBA deadlock.

Fixes: e7fd95849b3c ("media: coda: flush bitstream ring buffer on decoder restart")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/platform/coda/coda-common.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -1084,16 +1084,16 @@ static int coda_decoder_cmd(struct file
 
 	switch (dc->cmd) {
 	case V4L2_DEC_CMD_START:
-		mutex_lock(&ctx->bitstream_mutex);
 		mutex_lock(&dev->coda_mutex);
+		mutex_lock(&ctx->bitstream_mutex);
 		coda_bitstream_flush(ctx);
-		mutex_unlock(&dev->coda_mutex);
 		dst_vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
 					 V4L2_BUF_TYPE_VIDEO_CAPTURE);
 		vb2_clear_last_buffer_dequeued(dst_vq);
 		ctx->bit_stream_param &= ~CODA_BIT_STREAM_END_FLAG;
 		coda_fill_bitstream(ctx, NULL);
 		mutex_unlock(&ctx->bitstream_mutex);
+		mutex_unlock(&dev->coda_mutex);
 		break;
 	case V4L2_DEC_CMD_STOP:
 		stream_end = false;

[PATCH 5.4 155/203] media: cedrus: Use correct H264 8x8 scaling list

[Greg Kroah-Hartman]

From: Jonas Karlman <jonas@kwiboo.se>

commit a6b8feae7c88343212686120740cf7551dd16e08 upstream.

Documentation now defines the expected order of scaling lists,
change to use correct indices.

Fixes: 6eb9b758e307 ("media: cedrus: Add H264 decoding support")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/media/sunxi/cedrus/cedrus_h264.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_h264.c
@@ -244,8 +244,8 @@ static void cedrus_write_scaling_lists(s
 			       sizeof(scaling->scaling_list_8x8[0]));
 
 	cedrus_h264_write_sram(dev, CEDRUS_SRAM_H264_SCALING_LIST_8x8_1,
-			       scaling->scaling_list_8x8[3],
-			       sizeof(scaling->scaling_list_8x8[3]));
+			       scaling->scaling_list_8x8[1],
+			       sizeof(scaling->scaling_list_8x8[1]));
 
 	cedrus_h264_write_sram(dev, CEDRUS_SRAM_H264_SCALING_LIST_4x4,
 			       scaling->scaling_list_4x4,

[PATCH 5.4 156/203] media: hantro: Do not reorder H264 scaling list

[Greg Kroah-Hartman]

From: Jonas Karlman <jonas@kwiboo.se>

commit e17f08e3166635d2eaa6a894afeb28ca651ddd35 upstream.

Scaling list supplied from userspace should be in matrix order
and can be used without applying the inverse scanning process.

The HW also only support 8x8 scaling list for the Y component, indices 0
and 1 in the scaling list supplied from userspace.

Remove reordering and write the scaling matrix in an order expected by
the VPU, also only allocate memory for the two 8x8 lists supported.

Fixes: a9471e25629b ("media: hantro: Add core bits to support H264 decoding")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/media/hantro/hantro_h264.c |   51 ++++++-----------------------
 1 file changed, 12 insertions(+), 39 deletions(-)

--- a/drivers/staging/media/hantro/hantro_h264.c
+++ b/drivers/staging/media/hantro/hantro_h264.c
@@ -20,7 +20,7 @@
 /* Size with u32 units. */
 #define CABAC_INIT_BUFFER_SIZE		(460 * 2)
 #define POC_BUFFER_SIZE			34
-#define SCALING_LIST_SIZE		(6 * 16 + 6 * 64)
+#define SCALING_LIST_SIZE		(6 * 16 + 2 * 64)
 
 #define POC_CMP(p0, p1) ((p0) < (p1) ? -1 : 1)
 
@@ -194,23 +194,6 @@ static const u32 h264_cabac_table[] = {
 	0x1f0c2517, 0x1f261440
 };
 
-/*
- * NOTE: The scaling lists are in zig-zag order, apply inverse scanning process
- * to get the values in matrix order. In addition, the hardware requires bytes
- * swapped within each subsequent 4 bytes. Both arrays below include both
- * transformations.
- */
-static const u32 zig_zag_4x4[] = {
-	3, 2, 7, 11, 6, 1, 0, 5, 10, 15, 14, 9, 4, 8, 13, 12
-};
-
-static const u32 zig_zag_8x8[] = {
-	3, 2, 11, 19, 10, 1, 0, 9, 18, 27, 35, 26, 17, 8, 7, 6,
-	15, 16, 25, 34, 43, 51, 42, 33, 24, 23, 14, 5, 4, 13, 22, 31,
-	32, 41, 50, 59, 58, 49, 40, 39, 30, 21, 12, 20, 29, 38, 47, 48,
-	57, 56, 55, 46, 37, 28, 36, 45, 54, 63, 62, 53, 44, 52, 61, 60
-};
-
 static void
 reorder_scaling_list(struct hantro_ctx *ctx)
 {
@@ -218,33 +201,23 @@ reorder_scaling_list(struct hantro_ctx *
 	const struct v4l2_ctrl_h264_scaling_matrix *scaling = ctrls->scaling;
 	const size_t num_list_4x4 = ARRAY_SIZE(scaling->scaling_list_4x4);
 	const size_t list_len_4x4 = ARRAY_SIZE(scaling->scaling_list_4x4[0]);
-	const size_t num_list_8x8 = ARRAY_SIZE(scaling->scaling_list_8x8);
 	const size_t list_len_8x8 = ARRAY_SIZE(scaling->scaling_list_8x8[0]);
 	struct hantro_h264_dec_priv_tbl *tbl = ctx->h264_dec.priv.cpu;
-	u8 *dst = tbl->scaling_list;
-	const u8 *src;
+	u32 *dst = (u32 *)tbl->scaling_list;
+	const u32 *src;
 	int i, j;
 
-	BUILD_BUG_ON(ARRAY_SIZE(zig_zag_4x4) != list_len_4x4);
-	BUILD_BUG_ON(ARRAY_SIZE(zig_zag_8x8) != list_len_8x8);
-	BUILD_BUG_ON(ARRAY_SIZE(tbl->scaling_list) !=
-		     num_list_4x4 * list_len_4x4 +
-		     num_list_8x8 * list_len_8x8);
-
-	src = &scaling->scaling_list_4x4[0][0];
-	for (i = 0; i < num_list_4x4; ++i) {
-		for (j = 0; j < list_len_4x4; ++j)
-			dst[zig_zag_4x4[j]] = src[j];
-		src += list_len_4x4;
-		dst += list_len_4x4;
+	for (i = 0; i < num_list_4x4; i++) {
+		src = (u32 *)&scaling->scaling_list_4x4[i];
+		for (j = 0; j < list_len_4x4 / 4; j++)
+			*dst++ = swab32(src[j]);
 	}
 
-	src = &scaling->scaling_list_8x8[0][0];
-	for (i = 0; i < num_list_8x8; ++i) {
-		for (j = 0; j < list_len_8x8; ++j)
-			dst[zig_zag_8x8[j]] = src[j];
-		src += list_len_8x8;
-		dst += list_len_8x8;
+	/* Only Intra/Inter Y lists */
+	for (i = 0; i < 2; i++) {
+		src = (u32 *)&scaling->scaling_list_8x8[i];
+		for (j = 0; j < list_len_8x8 / 4; j++)
+			*dst++ = swab32(src[j]);
 	}
 }
 

[PATCH 5.4 157/203] media: aspeed-video: Fix memory leaks in aspeed_video_probe

[Greg Kroah-Hartman]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

commit c3df30a01da4955e04fa068c503cd784b31dad92 upstream.

In the implementation of aspeed_video_probe() the allocated memory for
video should be released if either devm_ioremap_resource()
or aspeed_video_init() or aspeed_video_setup_video() fails. Replace
kzalloc() with devm_kzalloc to avoid explicit release for video.

Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/platform/aspeed-video.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -1658,7 +1658,8 @@ static int aspeed_video_probe(struct pla
 {
 	int rc;
 	struct resource *res;
-	struct aspeed_video *video = kzalloc(sizeof(*video), GFP_KERNEL);
+	struct aspeed_video *video =
+		devm_kzalloc(&pdev->dev, sizeof(*video), GFP_KERNEL);
 
 	if (!video)
 		return -ENOMEM;

[PATCH 5.4 158/203] media: hantro: Set H264 FIELDPIC_FLAG_E flag correctly

[Greg Kroah-Hartman]

From: Jonas Karlman <jonas@kwiboo.se>

commit a2cbf80a842add9663522bf898cf13cb2ac4e423 upstream.

The FIELDPIC_FLAG_E bit should be set when field_pic_flag exists in stream,
it is currently set based on field_pic_flag of current frame.
The PIC_FIELDMODE_E bit is correctly set based on the field_pic_flag.

Fix this by setting the FIELDPIC_FLAG_E bit when frame_mbs_only is not set.

Fixes: dea0a82f3d22 ("media: hantro: Add support for H264 decoding on G1")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/media/hantro/hantro_g1_h264_dec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/media/hantro/hantro_g1_h264_dec.c
+++ b/drivers/staging/media/hantro/hantro_g1_h264_dec.c
@@ -63,7 +63,7 @@ static void set_params(struct hantro_ctx
 	/* always use the matrix sent from userspace */
 	reg |= G1_REG_DEC_CTRL2_TYPE1_QUANT_E;
 
-	if (slices[0].flags &  V4L2_H264_SLICE_FLAG_FIELD_PIC)
+	if (!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY))
 		reg |= G1_REG_DEC_CTRL2_FIELDPIC_FLAG_E;
 	vdpu_write_relaxed(vpu, reg, G1_REG_DEC_CTRL2);
 

[PATCH 5.4 159/203] iommu/mediatek: Correct the flush_iotlb_all callback

[Greg Kroah-Hartman]

From: Yong Wu <yong.wu@mediatek.com>

commit 2009122f1d83dd8375572661961eab1e7e86bffe upstream.

Use the correct tlb_flush_all instead of the original one.

Fixes: 4d689b619445 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/mtk_iommu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -447,7 +447,7 @@ static size_t mtk_iommu_unmap(struct iom
 
 static void mtk_iommu_flush_iotlb_all(struct iommu_domain *domain)
 {
-	mtk_iommu_tlb_sync(mtk_iommu_get_m4u_data());
+	mtk_iommu_tlb_flush_all(mtk_iommu_get_m4u_data());
 }
 
 static void mtk_iommu_iotlb_sync(struct iommu_domain *domain,

[PATCH 5.4 160/203] iommu/mediatek: Add a new tlb_lock for tlb_flush

[Greg Kroah-Hartman]

From: Yong Wu <yong.wu@mediatek.com>

commit da3cc91b8db403728cde03c8a95cba268d8cbf1b upstream.

The commit 4d689b619445 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API
TLB sync") help move the tlb_sync of unmap from v7s into the iommu
framework. It helps add a new function "mtk_iommu_iotlb_sync", But it
lacked the lock, then it will cause the variable "tlb_flush_active"
may be changed unexpectedly, we could see this warning log randomly:

mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to
full flush

The HW requires tlb_flush/tlb_sync in pairs strictly, this patch adds
a new tlb_lock for tlb operations to fix this issue.

Fixes: 4d689b619445 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/mtk_iommu.c |   23 ++++++++++++++++++++++-
 drivers/iommu/mtk_iommu.h |    1 +
 2 files changed, 23 insertions(+), 1 deletion(-)

--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -219,22 +219,37 @@ static void mtk_iommu_tlb_sync(void *coo
 static void mtk_iommu_tlb_flush_walk(unsigned long iova, size_t size,
 				     size_t granule, void *cookie)
 {
+	struct mtk_iommu_data *data = cookie;
+	unsigned long flags;
+
+	spin_lock_irqsave(&data->tlb_lock, flags);
 	mtk_iommu_tlb_add_flush_nosync(iova, size, granule, false, cookie);
 	mtk_iommu_tlb_sync(cookie);
+	spin_unlock_irqrestore(&data->tlb_lock, flags);
 }
 
 static void mtk_iommu_tlb_flush_leaf(unsigned long iova, size_t size,
 				     size_t granule, void *cookie)
 {
+	struct mtk_iommu_data *data = cookie;
+	unsigned long flags;
+
+	spin_lock_irqsave(&data->tlb_lock, flags);
 	mtk_iommu_tlb_add_flush_nosync(iova, size, granule, true, cookie);
 	mtk_iommu_tlb_sync(cookie);
+	spin_unlock_irqrestore(&data->tlb_lock, flags);
 }
 
 static void mtk_iommu_tlb_flush_page_nosync(struct iommu_iotlb_gather *gather,
 					    unsigned long iova, size_t granule,
 					    void *cookie)
 {
+	struct mtk_iommu_data *data = cookie;
+	unsigned long flags;
+
+	spin_lock_irqsave(&data->tlb_lock, flags);
 	mtk_iommu_tlb_add_flush_nosync(iova, granule, granule, true, cookie);
+	spin_unlock_irqrestore(&data->tlb_lock, flags);
 }
 
 static const struct iommu_flush_ops mtk_iommu_flush_ops = {
@@ -453,7 +468,12 @@ static void mtk_iommu_flush_iotlb_all(st
 static void mtk_iommu_iotlb_sync(struct iommu_domain *domain,
 				 struct iommu_iotlb_gather *gather)
 {
-	mtk_iommu_tlb_sync(mtk_iommu_get_m4u_data());
+	struct mtk_iommu_data *data = mtk_iommu_get_m4u_data();
+	unsigned long flags;
+
+	spin_lock_irqsave(&data->tlb_lock, flags);
+	mtk_iommu_tlb_sync(data);
+	spin_unlock_irqrestore(&data->tlb_lock, flags);
 }
 
 static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
@@ -733,6 +753,7 @@ static int mtk_iommu_probe(struct platfo
 	if (ret)
 		return ret;
 
+	spin_lock_init(&data->tlb_lock);
 	list_add_tail(&data->list, &m4ulist);
 
 	if (!iommu_present(&platform_bus_type))
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -58,6 +58,7 @@ struct mtk_iommu_data {
 	struct iommu_group		*m4u_group;
 	bool                            enable_4GB;
 	bool				tlb_flush_active;
+	spinlock_t			tlb_lock; /* lock for tlb range flush */
 
 	struct iommu_device		iommu;
 	const struct mtk_iommu_plat_data *plat_data;

[PATCH 5.4 161/203] memory: mtk-smi: Add PM suspend and resume ops

[Greg Kroah-Hartman]

From: Yong Wu <yong.wu@mediatek.com>

commit fb03082a54acd66c61535edfefe96b2ff88ce7e2 upstream.

In the commit 4f0a1a1ae351 ("memory: mtk-smi: Invoke pm runtime_callback
to enable clocks"), we use pm_runtime callback to enable/disable the smi
larb clocks. It will cause the larb's clock may not be disabled when
suspend. That is because device_prepare will call pm_runtime_get_noresume
which will keep the larb's PM runtime status still is active when suspend,
then it won't enter our pm_runtime suspend callback to disable the
corresponding clocks.

This patch adds suspend pm_ops to force disable the clocks, Use "LATE" to
make sure it disable the larb's clocks after the multimedia devices.

Fixes: 4f0a1a1ae351 ("memory: mtk-smi: Invoke pm runtime_callback to enable clocks")
Signed-off-by: Anan Sun <anan.sun@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/memory/mtk-smi.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -366,6 +366,8 @@ static int __maybe_unused mtk_smi_larb_s
 
 static const struct dev_pm_ops smi_larb_pm_ops = {
 	SET_RUNTIME_PM_OPS(mtk_smi_larb_suspend, mtk_smi_larb_resume, NULL)
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				     pm_runtime_force_resume)
 };
 
 static struct platform_driver mtk_smi_larb_driver = {
@@ -507,6 +509,8 @@ static int __maybe_unused mtk_smi_common
 
 static const struct dev_pm_ops smi_common_pm_ops = {
 	SET_RUNTIME_PM_OPS(mtk_smi_common_suspend, mtk_smi_common_resume, NULL)
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				     pm_runtime_force_resume)
 };
 
 static struct platform_driver mtk_smi_common_driver = {

[PATCH 5.4 162/203] Revert "ubifs: Fix memory leak bug in alloc_ubifs_info() error path"

[Greg Kroah-Hartman]

From: Richard Weinberger <richard@nod.at>

commit 91cbf01178c37086b32148c53e24b04cb77557cf upstream.

This reverts commit 9163e0184bd7d5f779934d34581843f699ad2ffd.

At the point when ubifs_fill_super() runs, we have already a reference
to the super block. So upon deactivate_locked_super() c will get
free()'ed via ->kill_sb().

Cc: Wenwen Wang <wenwen@cs.uga.edu>
Fixes: 9163e0184bd7 ("ubifs: Fix memory leak bug in alloc_ubifs_info() error path")
Reported-by: https://twitter.com/grsecurity/status/1180609139359277056
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/super.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -2267,10 +2267,8 @@ static struct dentry *ubifs_mount(struct
 		}
 	} else {
 		err = ubifs_fill_super(sb, data, flags & SB_SILENT ? 1 : 0);
-		if (err) {
-			kfree(c);
+		if (err)
 			goto out_deact;
-		}
 		/* We do not support atime */
 		sb->s_flags |= SB_ACTIVE;
 		if (IS_ENABLED(CONFIG_UBIFS_ATIME_SUPPORT))

[PATCH 5.4 163/203] ubifs: Fixed missed le64_to_cpu() in journal

[Greg Kroah-Hartman]

From: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>

commit df22b5b3ecc6233e33bd27f67f14c0cd1b5a5897 upstream.

In the ubifs_jnl_write_inode() functon, it calls ubifs_iget()
with xent->inum. The xent->inum is __le64, but the ubifs_iget()
takes native cpu endian.

I think that this should be changed to passing le64_to_cpu(xent->inum)
to fix the following sparse warning:

fs/ubifs/journal.c:902:58: warning: incorrect type in argument 2 (different base types)
fs/ubifs/journal.c:902:58:    expected unsigned long inum
fs/ubifs/journal.c:902:58:    got restricted __le64 [usertype] inum

Fixes: 7959cf3a7506 ("ubifs: journal: Handle xattrs like files")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/journal.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -899,7 +899,7 @@ int ubifs_jnl_write_inode(struct ubifs_i
 			fname_name(&nm) = xent->name;
 			fname_len(&nm) = le16_to_cpu(xent->nlen);
 
-			xino = ubifs_iget(c->vfs_sb, xent->inum);
+			xino = ubifs_iget(c->vfs_sb, le64_to_cpu(xent->inum));
 			if (IS_ERR(xino)) {
 				err = PTR_ERR(xino);
 				ubifs_err(c, "dead directory entry '%s', error %d",

[PATCH 5.4 164/203] ubifs: do_kill_orphans: Fix a memory leak bug

[Greg Kroah-Hartman]

From: Zhihao Cheng <chengzhihao1@huawei.com>

commit 10256f000932f12596dc043cf880ecf488a32510 upstream.

If there are more than one valid snod on the sleb->nodes list,
do_kill_orphans will malloc ino more than once without releasing
previous ino's memory. Finally, it will trigger memory leak.

Fixes: ee1438ce5dc4 ("ubifs: Check link count of inodes when...")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/orphan.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -631,12 +631,17 @@ static int do_kill_orphans(struct ubifs_
 	ino_t inum;
 	int i, n, err, first = 1;
 
+	ino = kmalloc(UBIFS_MAX_INO_NODE_SZ, GFP_NOFS);
+	if (!ino)
+		return -ENOMEM;
+
 	list_for_each_entry(snod, &sleb->nodes, list) {
 		if (snod->type != UBIFS_ORPH_NODE) {
 			ubifs_err(c, "invalid node type %d in orphan area at %d:%d",
 				  snod->type, sleb->lnum, snod->offs);
 			ubifs_dump_node(c, snod->node);
-			return -EINVAL;
+			err = -EINVAL;
+			goto out_free;
 		}
 
 		orph = snod->node;
@@ -663,20 +668,18 @@ static int do_kill_orphans(struct ubifs_
 				ubifs_err(c, "out of order commit number %llu in orphan node at %d:%d",
 					  cmt_no, sleb->lnum, snod->offs);
 				ubifs_dump_node(c, snod->node);
-				return -EINVAL;
+				err = -EINVAL;
+				goto out_free;
 			}
 			dbg_rcvry("out of date LEB %d", sleb->lnum);
 			*outofdate = 1;
-			return 0;
+			err = 0;
+			goto out_free;
 		}
 
 		if (first)
 			first = 0;
 
-		ino = kmalloc(UBIFS_MAX_INO_NODE_SZ, GFP_NOFS);
-		if (!ino)
-			return -ENOMEM;
-
 		n = (le32_to_cpu(orph->ch.len) - UBIFS_ORPH_NODE_SZ) >> 3;
 		for (i = 0; i < n; i++) {
 			union ubifs_key key1, key2;

[PATCH 5.4 165/203] spi: sprd: Fix the incorrect SPI register

[Greg Kroah-Hartman]

From: Huanpeng Xin <huanpeng.xin@unisoc.com>

commit 5e9c5236b7b86779b53b762f7e66240c3f18314b upstream.

The original code used an incorrect SPI register to initialize the SPI
controller in sprd_spi_init_hw(), thus fix it.

Fixes: e7d973a31c24 ("spi: sprd: Add SPI driver for Spreadtrum SC9860")
Signed-off-by: Huanpeng Xin <huanpeng.xin@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/b4f7f89ec0fdc595335687bfbd9f962213bc4a1d.1575443510.git.baolin.wang7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-sprd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-sprd.c
+++ b/drivers/spi/spi-sprd.c
@@ -674,7 +674,7 @@ static void sprd_spi_init_hw(struct sprd
 	u16 word_delay, interval;
 	u32 val;
 
-	val = readl_relaxed(ss->base + SPRD_SPI_CTL7);
+	val = readl_relaxed(ss->base + SPRD_SPI_CTL0);
 	val &= ~(SPRD_SPI_SCK_REV | SPRD_SPI_NG_TX | SPRD_SPI_NG_RX);
 	/* Set default chip selection, clock phase and clock polarity */
 	val |= ss->hw_mode & SPI_CPHA ? SPRD_SPI_NG_RX : SPRD_SPI_NG_TX;

[PATCH 5.4 166/203] mtd: spi-nor: fix silent truncation in spi_nor_read()

[Greg Kroah-Hartman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

commit a719a75a7761e4139dd099330d9fe3589d844f9b upstream.

spi_nor_read() assigns the result of 'ssize_t spi_nor_read_data()'
to the 'int ret' variable, while 'ssize_t' is a 64-bit type and *int*
is a 32-bit type on the 64-bit machines. This silent truncation isn't
really valid, so fix up the variable's type.

Fixes: 59451e1233bd ("mtd: spi-nor: change return value of read/write")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/spi-nor/spi-nor.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2544,7 +2544,7 @@ static int spi_nor_read(struct mtd_info
 			size_t *retlen, u_char *buf)
 {
 	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	int ret;
+	ssize_t ret;
 
 	dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len);
 

[PATCH 5.4 167/203] mtd: spi-nor: fix silent truncation in spi_nor_read_raw()

[Greg Kroah-Hartman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

commit 3d63ee5deb466fd66ed6ffb164a87ce36425cf36 upstream.

spi_nor_read_raw() assigns the result of 'ssize_t spi_nor_read_data()'
to the 'int ret' variable, while 'ssize_t' is a 64-bit type and *int*
is a 32-bit type on the 64-bit machines. This silent truncation isn't
really valid, so fix up the variable's type.

Fixes: f384b352cbf0 ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/spi-nor/spi-nor.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2865,7 +2865,7 @@ static int spi_nor_hwcaps_pp2cmd(u32 hwc
  */
 static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
 {
-	int ret;
+	ssize_t ret;
 
 	while (len) {
 		ret = spi_nor_read_data(nor, addr, len, buf);

[PATCH 5.4 168/203] spi: pxa2xx: Set controller->max_transfer_size in dma mode

[Greg Kroah-Hartman]

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit b2662a164f9dc48da8822e56600686d639056282 upstream.

In DMA mode we have a maximum transfer size, past that the driver
falls back to PIO (see the check at the top of pxa2xx_spi_transfer_one).
Falling back to PIO for big transfers defeats the point of a dma engine,
hence set the max transfer size to inform spi clients that they need
to do something smarter.

This was uncovered by the drm_mipi_dbi spi panel code, which does
large spi transfers, but stopped splitting them after:

commit e143364b4c1774f68e923a5a0bb0fca28ac25888
Author: Noralf Trønnes <noralf@tronnes.org>
Date:   Fri Jul 19 17:59:10 2019 +0200

    drm/tinydrm: Remove tinydrm_spi_max_transfer_size()

After this commit the code relied on the spi core to split transfers
into max dma-able blocks, which also papered over the PIO fallback issue.

Fix this by setting the overall max transfer size to the DMA limit,
but only when the controller runs in DMA mode.

Fixes: e143364b4c17 ("drm/tinydrm: Remove tinydrm_spi_max_transfer_size()")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Reported-and-tested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20191017064426.30814-1-daniel.vetter@ffwll.ch
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-pxa2xx.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1612,6 +1612,11 @@ static int pxa2xx_spi_fw_translate_cs(st
 	return cs;
 }
 
+static size_t pxa2xx_spi_max_dma_transfer_size(struct spi_device *spi)
+{
+	return MAX_DMA_LEN;
+}
+
 static int pxa2xx_spi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1717,6 +1722,8 @@ static int pxa2xx_spi_probe(struct platf
 		} else {
 			controller->can_dma = pxa2xx_spi_can_dma;
 			controller->max_dma_len = MAX_DMA_LEN;
+			controller->max_transfer_size =
+				pxa2xx_spi_max_dma_transfer_size;
 		}
 	}
 

[PATCH 5.4 169/203] spi: atmel: fix handling of cs_change set on non-last xfer

[Greg Kroah-Hartman]

From: Mans Rullgard <mans@mansr.com>

commit fed8d8c7a6dc2a76d7764842853d81c770b0788e upstream.

The driver does the wrong thing when cs_change is set on a non-last
xfer in a message.  When cs_change is set, the driver deactivates the
CS and leaves it off until a later xfer again has cs_change set whereas
it should be briefly toggling CS off and on again.

This patch brings the behaviour of the driver back in line with the
documentation and common sense.  The delay of 10 us is the same as is
used by the default spi_transfer_one_message() function in spi.c.
[gregory: rebased on for-5.5 from spi tree]
Fixes: 8090d6d1a415 ("spi: atmel: Refactor spi-atmel to use SPI framework queue")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20191018153504.4249-1-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-atmel.c |   10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -302,7 +302,6 @@ struct atmel_spi {
 	bool			use_cs_gpios;
 
 	bool			keep_cs;
-	bool			cs_active;
 
 	u32			fifo_size;
 };
@@ -1374,11 +1373,9 @@ static int atmel_spi_one_transfer(struct
 				 &msg->transfers)) {
 			as->keep_cs = true;
 		} else {
-			as->cs_active = !as->cs_active;
-			if (as->cs_active)
-				cs_activate(as, msg->spi);
-			else
-				cs_deactivate(as, msg->spi);
+			cs_deactivate(as, msg->spi);
+			udelay(10);
+			cs_activate(as, msg->spi);
 		}
 	}
 
@@ -1401,7 +1398,6 @@ static int atmel_spi_transfer_one_messag
 	atmel_spi_lock(as);
 	cs_activate(as, spi);
 
-	as->cs_active = true;
 	as->keep_cs = false;
 
 	msg->status = 0;

[PATCH 5.4 170/203] spi: rspi: Use platform_get_irq_byname_optional() for optional irqs

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit 2de860b4a7a0bd5a4b5bd3bff0e6a615495df4ba upstream.

As platform_get_irq_byname() now prints an error when the interrupt
does not exist, scary warnings may be printed for optional interrupts:

    renesas_spi e6b10000.spi: IRQ rx not found
    renesas_spi e6b10000.spi: IRQ mux not found

Fix this by calling platform_get_irq_byname_optional() instead.
Remove the no longer needed printing of platform_get_irq errors, as the
remaining calls to platform_get_irq() and platform_get_irq_byname() take
care of that.

Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191016143101.28738-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-rspi.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -1257,9 +1257,9 @@ static int rspi_probe(struct platform_de
 	ctlr->flags = ops->flags;
 	ctlr->dev.of_node = pdev->dev.of_node;
 
-	ret = platform_get_irq_byname(pdev, "rx");
+	ret = platform_get_irq_byname_optional(pdev, "rx");
 	if (ret < 0) {
-		ret = platform_get_irq_byname(pdev, "mux");
+		ret = platform_get_irq_byname_optional(pdev, "mux");
 		if (ret < 0)
 			ret = platform_get_irq(pdev, 0);
 		if (ret >= 0)
@@ -1270,10 +1270,6 @@ static int rspi_probe(struct platform_de
 		if (ret >= 0)
 			rspi->tx_irq = ret;
 	}
-	if (ret < 0) {
-		dev_err(&pdev->dev, "platform_get_irq error\n");
-		goto error2;
-	}
 
 	if (rspi->rx_irq == rspi->tx_irq) {
 		/* Single multiplexed interrupt */

[PATCH 5.4 171/203] spi: lpspi: fix memory leak in fsl_lpspi_probe

[Greg Kroah-Hartman]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

commit 057b8945f78f76d0b04eeb5c27cd9225e5e7ad86 upstream.

In fsl_lpspi_probe an SPI controller is allocated either via
spi_alloc_slave or spi_alloc_master. In all but one error cases this
controller is put by going to error handling code. This commit fixes the
case when pm_runtime_get_sync fails and it should go to the error
handling path.

Fixes: 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190930034602.1467-1-navid.emamdoost@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-fsl-lpspi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -938,7 +938,7 @@ static int fsl_lpspi_probe(struct platfo
 	ret = pm_runtime_get_sync(fsl_lpspi->dev);
 	if (ret < 0) {
 		dev_err(fsl_lpspi->dev, "failed to enable clock\n");
-		return ret;
+		goto out_controller_put;
 	}
 
 	temp = readl(fsl_lpspi->base + IMX7ULP_PARAM);

[PATCH 5.4 172/203] iwlwifi: mvm: consider ieee80211 station max amsdu value

[Greg Kroah-Hartman]

From: Mordechay Goodstein <mordechay.goodstein@intel.com>

commit ee4cce9b9d6421d037ffc002536b918fd7f4aff3 upstream.

debugfs amsdu_len sets only the max_amsdu_len for ieee80211 station
so take it into consideration while getting max amsdu

Fixes: af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets")
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c |    8 +++++++-
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c    |    7 ++++++-
 2 files changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
@@ -350,7 +350,13 @@ void iwl_mvm_tlc_update_notif(struct iwl
 		u16 size = le32_to_cpu(notif->amsdu_size);
 		int i;
 
-		if (WARN_ON(sta->max_amsdu_len < size))
+		/*
+		 * In debug sta->max_amsdu_len < size
+		 * so also check with orig_amsdu_len which holds the original
+		 * data before debugfs changed the value
+		 */
+		if (WARN_ON(sta->max_amsdu_len < size &&
+			    mvmsta->orig_amsdu_len < size))
 			goto out;
 
 		mvmsta->amsdu_enabled = le32_to_cpu(notif->amsdu_enabled);
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -935,7 +935,12 @@ static int iwl_mvm_tx_tso(struct iwl_mvm
 	    !(mvmsta->amsdu_enabled & BIT(tid)))
 		return iwl_mvm_tx_tso_segment(skb, 1, netdev_flags, mpdus_skb);
 
-	max_amsdu_len = iwl_mvm_max_amsdu_size(mvm, sta, tid);
+	/*
+	 * Take the min of ieee80211 station and mvm station
+	 */
+	max_amsdu_len =
+		min_t(unsigned int, sta->max_amsdu_len,
+		      iwl_mvm_max_amsdu_size(mvm, sta, tid));
 
 	/*
 	 * Limit A-MSDU in A-MPDU to 4095 bytes when VHT is not

[PATCH 5.4 173/203] rtlwifi: Remove unnecessary NULL check in rtl_regd_init

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

commit 091c6e9c083f7ebaff00b37ad13562d51464d175 upstream.

When building with Clang + -Wtautological-pointer-compare:

drivers/net/wireless/realtek/rtlwifi/regd.c:389:33: warning: comparison
of address of 'rtlpriv->regd' equal to a null pointer is always false
[-Wtautological-pointer-compare]
        if (wiphy == NULL || &rtlpriv->regd == NULL)
                              ~~~~~~~~~^~~~    ~~~~
1 warning generated.

The address of an array member is never NULL unless it is the first
struct member so remove the unnecessary check. This was addressed in
the staging version of the driver in commit f986978b32b3 ("Staging:
rtlwifi: remove unnecessary NULL check").

While we are here, fix the following checkpatch warning:

CHECK: Comparison to NULL could be written "!wiphy"
35: FILE: drivers/net/wireless/realtek/rtlwifi/regd.c:389:
+       if (wiphy == NULL)

Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Link:https://github.com/ClangBuiltLinux/linux/issues/750
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/realtek/rtlwifi/regd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/realtek/rtlwifi/regd.c
+++ b/drivers/net/wireless/realtek/rtlwifi/regd.c
@@ -386,7 +386,7 @@ int rtl_regd_init(struct ieee80211_hw *h
 	struct wiphy *wiphy = hw->wiphy;
 	struct country_code_to_enum_rd *country = NULL;
 
-	if (wiphy == NULL || &rtlpriv->regd == NULL)
+	if (!wiphy)
 		return -EINVAL;
 
 	/* init country_code from efuse channel plan */

[PATCH 5.4 174/203] iwlwifi: mvm: fix support for single antenna diversity

[Greg Kroah-Hartman]

From: Luca Coelho <luciano.coelho@intel.com>

commit bb99ff9baa02beb9216c86678999342197c849cc upstream.

When the single antenna diversity support was sent upstream, only some
definitions were sent, due to a bad revert.

Fix this by adding the actual code.

Fixes: 5952e0ec3f05 ("iwlwifi: mvm: add support for single antenna diversity")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c |   20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -514,6 +514,18 @@ static int iwl_send_phy_cfg_cmd(struct i
 	struct iwl_phy_cfg_cmd phy_cfg_cmd;
 	enum iwl_ucode_type ucode_type = mvm->fwrt.cur_fw_img;
 
+	if (iwl_mvm_has_unified_ucode(mvm) &&
+	    !mvm->trans->cfg->tx_with_siso_diversity) {
+		return 0;
+	} else if (mvm->trans->cfg->tx_with_siso_diversity) {
+		/*
+		 * TODO: currently we don't set the antenna but letting the NIC
+		 * to decide which antenna to use. This should come from BIOS.
+		 */
+		phy_cfg_cmd.phy_cfg =
+			cpu_to_le32(FW_PHY_CFG_CHAIN_SAD_ENABLED);
+	}
+
 	/* Set parameters */
 	phy_cfg_cmd.phy_cfg = cpu_to_le32(iwl_mvm_get_phy_config(mvm));
 
@@ -1344,12 +1356,12 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 		ret = iwl_send_phy_db_data(mvm->phy_db);
 		if (ret)
 			goto error;
-
-		ret = iwl_send_phy_cfg_cmd(mvm);
-		if (ret)
-			goto error;
 	}
 
+	ret = iwl_send_phy_cfg_cmd(mvm);
+	if (ret)
+		goto error;
+
 	ret = iwl_mvm_send_bt_init_conf(mvm);
 	if (ret)
 		goto error;

[PATCH 5.4 175/203] sch_cake: Add missing NLA policy entry TCA_CAKE_SPLIT_GSO

[Greg Kroah-Hartman]

From: Victorien Molle <victorien.molle@wifirst.fr>

commit b3c424eb6a1a3c485de64619418a471dee6ce849 upstream.

This field has never been checked since introduction in mainline kernel

Signed-off-by: Victorien Molle <victorien.molle@wifirst.fr>
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Fixes: 2db6dc2662ba "sch_cake: Make gso-splitting configurable from userspace"
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sched/sch_cake.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/sched/sch_cake.c
+++ b/net/sched/sch_cake.c
@@ -2184,6 +2184,7 @@ static const struct nla_policy cake_poli
 	[TCA_CAKE_MPU]		 = { .type = NLA_U32 },
 	[TCA_CAKE_INGRESS]	 = { .type = NLA_U32 },
 	[TCA_CAKE_ACK_FILTER]	 = { .type = NLA_U32 },
+	[TCA_CAKE_SPLIT_GSO]	 = { .type = NLA_U32 },
 	[TCA_CAKE_FWMARK]	 = { .type = NLA_U32 },
 };
 

[PATCH 5.4 176/203] f2fs: fix potential overflow

[Greg Kroah-Hartman]

From: Chao Yu <yuchao0@huawei.com>

commit 1f0d5c911b64165c9754139a26c8c2fad352c132 upstream.

We expect 64-bit calculation result from below statement, however
in 32-bit machine, looped left shift operation on pgoff_t type
variable may cause overflow issue, fix it by forcing type cast.

page->index << PAGE_SHIFT;

Fixes: 26de9b117130 ("f2fs: avoid unnecessary updating inode during fsync")
Fixes: 0a2aa8fbb969 ("f2fs: refactor __exchange_data_block for speed up")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/f2fs/data.c |    2 +-
 fs/f2fs/file.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -2098,7 +2098,7 @@ static int __write_data_page(struct page
 	loff_t i_size = i_size_read(inode);
 	const pgoff_t end_index = ((unsigned long long) i_size)
 							>> PAGE_SHIFT;
-	loff_t psize = (page->index + 1) << PAGE_SHIFT;
+	loff_t psize = (loff_t)(page->index + 1) << PAGE_SHIFT;
 	unsigned offset = 0;
 	bool need_balance_fs = false;
 	int err = 0;
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -1139,7 +1139,7 @@ static int __clone_blkaddrs(struct inode
 				}
 				dn.ofs_in_node++;
 				i++;
-				new_size = (dst + i) << PAGE_SHIFT;
+				new_size = (loff_t)(dst + i) << PAGE_SHIFT;
 				if (dst_inode->i_size < new_size)
 					f2fs_i_size_write(dst_inode, new_size);
 			} while (--ilen && (do_replace[i] || blkaddr[i] == NULL_ADDR));

[PATCH 5.4 177/203] NFSD fixing possible null pointer derefering in copy offload

[Greg Kroah-Hartman]

From: Olga Kornievskaia <olga.kornievskaia@gmail.com>

commit 18f428d4e2f7eff162d80b2b21689496c4e82afd upstream.

Static checker revealed possible error path leading to possible
NULL pointer dereferencing.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e0639dc5805a: ("NFSD introduce async copy feature")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfsd/nfs4proc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1298,7 +1298,8 @@ nfsd4_copy(struct svc_rqst *rqstp, struc
 out:
 	return status;
 out_err:
-	cleanup_async_copy(async_copy);
+	if (async_copy)
+		cleanup_async_copy(async_copy);
 	goto out;
 }
 

[PATCH 5.4 178/203] rtc: msm6242: Fix reading of 10-hour digit

[Greg Kroah-Hartman]

From: Kars de Jong <jongk@linux-m68k.org>

commit e34494c8df0cd96fc432efae121db3212c46ae48 upstream.

The driver was reading the wrong register as the 10-hour digit due to
a misplaced ')'. It was in fact reading the 1-second digit register due
to this bug.

Also remove the use of a magic number for the hour mask and use the define
for it which was already present.

Fixes: 4f9b9bba1dd1 ("rtc: Add an RTC driver for the Oki MSM6242")
Tested-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Link: https://lore.kernel.org/r/20191116110548.8562-1-jongk@linux-m68k.org
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-msm6242.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/rtc/rtc-msm6242.c
+++ b/drivers/rtc/rtc-msm6242.c
@@ -133,7 +133,8 @@ static int msm6242_read_time(struct devi
 		      msm6242_read(priv, MSM6242_SECOND1);
 	tm->tm_min  = msm6242_read(priv, MSM6242_MINUTE10) * 10 +
 		      msm6242_read(priv, MSM6242_MINUTE1);
-	tm->tm_hour = (msm6242_read(priv, MSM6242_HOUR10 & 3)) * 10 +
+	tm->tm_hour = (msm6242_read(priv, MSM6242_HOUR10) &
+		       MSM6242_HOUR10_HR_MASK) * 10 +
 		      msm6242_read(priv, MSM6242_HOUR1);
 	tm->tm_mday = msm6242_read(priv, MSM6242_DAY10) * 10 +
 		      msm6242_read(priv, MSM6242_DAY1);

[PATCH 5.4 179/203] rtc: brcmstb-waketimer: add missed clk_disable_unprepare

[Greg Kroah-Hartman]

From: Chuhong Yuan <hslester96@gmail.com>

commit 94303f8930ed78aea0f189b703c9d79fff9555d7 upstream.

This driver forgets to disable and unprepare clock when remove.
Add a call to clk_disable_unprepare to fix it.

Fixes: c4f07ecee22e ("rtc: brcmstb-waketimer: Add Broadcom STB wake-timer")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20191105160043.20018-1-hslester96@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-brcmstb-waketimer.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/rtc/rtc-brcmstb-waketimer.c
+++ b/drivers/rtc/rtc-brcmstb-waketimer.c
@@ -277,6 +277,7 @@ static int brcmstb_waketmr_remove(struct
 	struct brcmstb_waketmr *timer = dev_get_drvdata(&pdev->dev);
 
 	unregister_reboot_notifier(&timer->reboot_notifier);
+	clk_disable_unprepare(timer->clk);
 
 	return 0;
 }

[PATCH 5.4 180/203] rtc: bd70528: Add MODULE ALIAS to autoload module

[Greg Kroah-Hartman]

From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>

commit c3e12e66b14a043daac6b3d0559df80b9ed7679c upstream.

The bd70528 RTC driver is probed by MFD driver. Add MODULE_ALIAS
in order to allow udev to load the module when MFD sub-device cell
for RTC is added.

I'm not sure if this is a bugfix or feature addition but I guess
fixes tag won't harm in this case.

Fixes: 32a4a4ebf768 ("rtc: bd70528: Initial support for ROHM bd70528 RTC")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20191023114711.GA13954@localhost.localdomain
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-bd70528.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/rtc/rtc-bd70528.c
+++ b/drivers/rtc/rtc-bd70528.c
@@ -491,3 +491,4 @@ module_platform_driver(bd70528_rtc);
 MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
 MODULE_DESCRIPTION("BD70528 RTC driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platofrm:bd70528-rtc");

[PATCH 5.4 181/203] gpio: mpc8xxx: Add platform device to gpiochip->parent

[Greg Kroah-Hartman]

From: Johnson CH Chen (陳昭勳) <JohnsonCH.Chen@moxa.com>

[ Upstream commit 322f6a3182d42df18059a89c53b09d33919f755e ]

Dear Linus Walleij,

In old kernels, some APIs still try to use parent->of_node from struct gpio_chip,
and it could be resulted in kernel panic because parent is NULL. Adding platform
device to gpiochip->parent can fix this problem.

Signed-off-by: Johnson Chen <johnsonch.chen@moxa.com>
Link: https://patchwork.kernel.org/patch/11234609
Link: https://lore.kernel.org/r/HK0PR01MB3521489269F76467DFD7843FFA450@HK0PR01MB3521.apcprd01.prod.exchangelabs.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-mpc8xxx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index a031cbcdf6ef..d72a3a5507b0 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -346,6 +346,7 @@ static int mpc8xxx_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	gc = &mpc8xxx_gc->gc;
+	gc->parent = &pdev->dev;
 
 	if (of_property_read_bool(np, "little-endian")) {
 		ret = bgpio_init(gc, &pdev->dev, 4,
-- 
2.20.1

[PATCH 5.4 182/203] scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy()

[Greg Kroah-Hartman]

From: Varun Prakash <varun@chelsio.com>

[ Upstream commit 71482fde704efdd8c3abe0faf34d922c61e8d76b ]

If cxgb4i_ddp_init() fails then cdev->cdev2ppm will be NULL, so add a check
for NULL pointer before dereferencing it.

Link: https://lore.kernel.org/r/1576676731-3068-1-git-send-email-varun@chelsio.com
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/cxgbi/libcxgbi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index 3e17af8aedeb..2cd2761bd249 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -121,7 +121,8 @@ static inline void cxgbi_device_destroy(struct cxgbi_device *cdev)
 		"cdev 0x%p, p# %u.\n", cdev, cdev->nports);
 	cxgbi_hbas_remove(cdev);
 	cxgbi_device_portmap_cleanup(cdev);
-	cxgbi_ppm_release(cdev->cdev2ppm(cdev));
+	if (cdev->cdev2ppm)
+		cxgbi_ppm_release(cdev->cdev2ppm(cdev));
 	if (cdev->pmap.max_connect)
 		cxgbi_free_big_mem(cdev->pmap.port_csk);
 	kfree(cdev);
-- 
2.20.1

[PATCH 5.4 183/203] scsi: target/iblock: Fix protection error with blocks greater than 512B

[Greg Kroah-Hartman]

From: Israel Rukshin <israelr@mellanox.com>

[ Upstream commit e4dc9a4c31fe10d1751c542702afc85be8a5c56a ]

The sector size of the block layer is 512 bytes, but integrity interval
size might be different (in case of 4K block size of the media). At the
initiator side the virtual start sector is the one that was originally
submitted by the block layer (512 bytes) for the Reftag usage. The
initiator converts the Reftag to integrity interval units and sends it to
the target. So the target virtual start sector should be calculated at
integrity interval units. prepare_fn() and complete_fn() don't remap
correctly the Reftag when using incorrect units of the virtual start
sector, which leads to the following protection error at the device:

"blk_update_request: protection error, dev sdb, sector 2048 op 0x0:(READ)
flags 0x10000 phys_seg 1 prio class 0"

To fix that, set the seed in integrity interval units.

Link: https://lore.kernel.org/r/1576078562-15240-1-git-send-email-israelr@mellanox.com
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_iblock.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index 6949ea8bc387..51ffd5c002de 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -646,7 +646,9 @@ iblock_alloc_bip(struct se_cmd *cmd, struct bio *bio,
 	}
 
 	bip->bip_iter.bi_size = bio_integrity_bytes(bi, bio_sectors(bio));
-	bip_set_seed(bip, bio->bi_iter.bi_sector);
+	/* virtual start sector must be in integrity interval units */
+	bip_set_seed(bip, bio->bi_iter.bi_sector >>
+				  (bi->interval_exp - SECTOR_SHIFT));
 
 	pr_debug("IBLOCK BIP Size: %u Sector: %llu\n", bip->bip_iter.bi_size,
 		 (unsigned long long)bip->bip_iter.bi_sector);
-- 
2.20.1

[PATCH 5.4 184/203] selftests: firmware: Fix it to do root uid check and skip

[Greg Kroah-Hartman]

From: Shuah Khan <skhan@linuxfoundation.org>

[ Upstream commit c65e41538b04e0d64a673828745a00cb68a24371 ]

firmware attempts to load test modules that require root access
and fail. Fix it to check for root uid and exit with skip code
instead.

Before this fix:

selftests: firmware: fw_run_tests.sh
modprobe: ERROR: could not insert 'test_firmware': Operation not permitted
You must have the following enabled in your kernel:
CONFIG_TEST_FIRMWARE=y
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
not ok 1 selftests: firmware: fw_run_tests.sh # SKIP

With this fix:

selftests: firmware: fw_run_tests.sh
skip all tests: must be run as root
not ok 1 selftests: firmware: fw_run_tests.sh # SKIP

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviwed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/firmware/fw_lib.sh | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
index b879305a766d..5b8c0fedee76 100755
--- a/tools/testing/selftests/firmware/fw_lib.sh
+++ b/tools/testing/selftests/firmware/fw_lib.sh
@@ -34,6 +34,12 @@ test_modprobe()
 
 check_mods()
 {
+	local uid=$(id -u)
+	if [ $uid -ne 0 ]; then
+		echo "skip all tests: must be run as root" >&2
+		exit $ksft_skip
+	fi
+
 	trap "test_modprobe" EXIT
 	if [ ! -d $DIR ]; then
 		modprobe test_firmware
-- 
2.20.1

[PATCH 5.4 185/203] rseq/selftests: Turn off timeout setting

[Greg Kroah-Hartman]

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

[ Upstream commit af9cb29c5488381083b0b5ccdfb3cd931063384a ]

As the rseq selftests can run for a long period of time, disable the
timeout that the general selftests have.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/rseq/settings | 1 +
 1 file changed, 1 insertion(+)
 create mode 100644 tools/testing/selftests/rseq/settings

diff --git a/tools/testing/selftests/rseq/settings b/tools/testing/selftests/rseq/settings
new file mode 100644
index 000000000000..e7b9417537fb
--- /dev/null
+++ b/tools/testing/selftests/rseq/settings
@@ -0,0 +1 @@
+timeout=0
-- 
2.20.1

[PATCH 5.4 186/203] riscv: export flush_icache_all to modules

[Greg Kroah-Hartman]

From: Olof Johansson <olof@lixom.net>

[ Upstream commit 1833e327a5ea1d1f356fbf6ded0760c9ff4b0594 ]

This is needed by LKDTM (crash dump test module), it calls
flush_icache_range(), which on RISC-V turns into flush_icache_all(). On
other architectures, the actual implementation is exported, so follow
that precedence and export it here too.

Fixes build of CONFIG_LKDTM that fails with:
ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined!

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/mm/cacheflush.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c
index 3f15938dec89..c54bd3c79955 100644
--- a/arch/riscv/mm/cacheflush.c
+++ b/arch/riscv/mm/cacheflush.c
@@ -14,6 +14,7 @@ void flush_icache_all(void)
 {
 	sbi_remote_fence_i(NULL);
 }
+EXPORT_SYMBOL(flush_icache_all);
 
 /*
  * Performs an icache flush for the given MM context.  RISC-V has no direct
-- 
2.20.1

[PATCH 5.4 187/203] mips: cacheinfo: report shared CPU map

[Greg Kroah-Hartman]

From: Vladimir Kondratiev <vladimir.kondratiev@intel.com>

[ Upstream commit 3b1313eb32c499d46dc4c3e896d19d9564c879c4 ]

Report L1 caches as shared per core; L2 - per cluster.

This fixes "perf" that went crazy if shared_cpu_map attribute not
reported on sysfs, in form of

/sys/devices/system/cpu/cpu*/cache/index*/shared_cpu_list
/sys/devices/system/cpu/cpu*/cache/index*/shared_cpu_map

Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/cacheinfo.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/arch/mips/kernel/cacheinfo.c b/arch/mips/kernel/cacheinfo.c
index f777e44653d5..47312c529410 100644
--- a/arch/mips/kernel/cacheinfo.c
+++ b/arch/mips/kernel/cacheinfo.c
@@ -50,6 +50,25 @@ static int __init_cache_level(unsigned int cpu)
 	return 0;
 }
 
+static void fill_cpumask_siblings(int cpu, cpumask_t *cpu_map)
+{
+	int cpu1;
+
+	for_each_possible_cpu(cpu1)
+		if (cpus_are_siblings(cpu, cpu1))
+			cpumask_set_cpu(cpu1, cpu_map);
+}
+
+static void fill_cpumask_cluster(int cpu, cpumask_t *cpu_map)
+{
+	int cpu1;
+	int cluster = cpu_cluster(&cpu_data[cpu]);
+
+	for_each_possible_cpu(cpu1)
+		if (cpu_cluster(&cpu_data[cpu1]) == cluster)
+			cpumask_set_cpu(cpu1, cpu_map);
+}
+
 static int __populate_cache_leaves(unsigned int cpu)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -57,14 +76,20 @@ static int __populate_cache_leaves(unsigned int cpu)
 	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
 
 	if (c->icache.waysize) {
+		/* L1 caches are per core */
+		fill_cpumask_siblings(cpu, &this_leaf->shared_cpu_map);
 		populate_cache(dcache, this_leaf, 1, CACHE_TYPE_DATA);
+		fill_cpumask_siblings(cpu, &this_leaf->shared_cpu_map);
 		populate_cache(icache, this_leaf, 1, CACHE_TYPE_INST);
 	} else {
 		populate_cache(dcache, this_leaf, 1, CACHE_TYPE_UNIFIED);
 	}
 
-	if (c->scache.waysize)
+	if (c->scache.waysize) {
+		/* L2 cache is per cluster */
+		fill_cpumask_cluster(cpu, &this_leaf->shared_cpu_map);
 		populate_cache(scache, this_leaf, 2, CACHE_TYPE_UNIFIED);
+	}
 
 	if (c->tcache.waysize)
 		populate_cache(tcache, this_leaf, 3, CACHE_TYPE_UNIFIED);
-- 
2.20.1

[PATCH 5.4 188/203] mips: Fix gettimeofday() in the vdso library

[Greg Kroah-Hartman]

From: Vincenzo Frascino <vincenzo.frascino@arm.com>

[ Upstream commit 7d2aa4bb90f5f6f1b8de8848c26042403f2d7bf9 ]

The libc provides a discovery mechanism for vDSO library and its
symbols. When a symbol is not exposed by the vDSOs the libc falls back
on the system calls.

With the introduction of the unified vDSO library on mips this behavior
is not honored anymore by the kernel in the case of gettimeofday().

The issue has been noticed and reported due to a dhclient failure on the
CI20 board:

root@letux:~# dhclient
../../../../lib/isc/unix/time.c:200: Operation not permitted
root@letux:~#

Restore the original behavior fixing gettimeofday() in the vDSO library.

Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> # CI20 with JZ4780
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: mips-creator-ci20-dev@googlegroups.com
Cc: letux-kernel@openphoenux.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/vdso/gettimeofday.h | 13 -------------
 arch/mips/vdso/vgettimeofday.c            | 20 ++++++++++++++++++++
 2 files changed, 20 insertions(+), 13 deletions(-)

diff --git a/arch/mips/include/asm/vdso/gettimeofday.h b/arch/mips/include/asm/vdso/gettimeofday.h
index b08825531e9f..0ae9b4cbc153 100644
--- a/arch/mips/include/asm/vdso/gettimeofday.h
+++ b/arch/mips/include/asm/vdso/gettimeofday.h
@@ -26,8 +26,6 @@
 
 #define __VDSO_USE_SYSCALL		ULLONG_MAX
 
-#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
-
 static __always_inline long gettimeofday_fallback(
 				struct __kernel_old_timeval *_tv,
 				struct timezone *_tz)
@@ -48,17 +46,6 @@ static __always_inline long gettimeofday_fallback(
 	return error ? -ret : ret;
 }
 
-#else
-
-static __always_inline long gettimeofday_fallback(
-				struct __kernel_old_timeval *_tv,
-				struct timezone *_tz)
-{
-	return -1;
-}
-
-#endif
-
 static __always_inline long clock_gettime_fallback(
 					clockid_t _clkid,
 					struct __kernel_timespec *_ts)
diff --git a/arch/mips/vdso/vgettimeofday.c b/arch/mips/vdso/vgettimeofday.c
index 6ebdc37c89fc..6b83b6376a4b 100644
--- a/arch/mips/vdso/vgettimeofday.c
+++ b/arch/mips/vdso/vgettimeofday.c
@@ -17,12 +17,22 @@ int __vdso_clock_gettime(clockid_t clock,
 	return __cvdso_clock_gettime32(clock, ts);
 }
 
+#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
+
+/*
+ * This is behind the ifdef so that we don't provide the symbol when there's no
+ * possibility of there being a usable clocksource, because there's nothing we
+ * can do without it. When libc fails the symbol lookup it should fall back on
+ * the standard syscall path.
+ */
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
 			struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
 }
 
+#endif /* CONFIG_MIPS_CLOCK_VSYSCALL */
+
 int __vdso_clock_getres(clockid_t clock_id,
 			struct old_timespec32 *res)
 {
@@ -43,12 +53,22 @@ int __vdso_clock_gettime(clockid_t clock,
 	return __cvdso_clock_gettime(clock, ts);
 }
 
+#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
+
+/*
+ * This is behind the ifdef so that we don't provide the symbol when there's no
+ * possibility of there being a usable clocksource, because there's nothing we
+ * can do without it. When libc fails the symbol lookup it should fall back on
+ * the standard syscall path.
+ */
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
 			struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
 }
 
+#endif /* CONFIG_MIPS_CLOCK_VSYSCALL */
+
 int __vdso_clock_getres(clockid_t clock_id,
 			struct __kernel_timespec *res)
 {
-- 
2.20.1

[PATCH 5.4 189/203] tomoyo: Suppress RCU warning at list_for_each_entry_rcu().

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit 6bd5ce6089b561f5392460bfb654dea89356ab1b ]

John Garry has reported that allmodconfig kernel on arm64 causes flood of
"RCU-list traversed in non-reader section!!" warning. I don't know what
change caused this warning, but this warning is safe because TOMOYO uses
SRCU lock instead. Let's suppress this warning by explicitly telling that
the caller is holding SRCU lock.

Reported-and-tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/tomoyo/common.c |  9 ++++++---
 security/tomoyo/domain.c | 15 ++++++++++-----
 security/tomoyo/group.c  |  9 ++++++---
 security/tomoyo/util.c   |  6 ++++--
 4 files changed, 26 insertions(+), 13 deletions(-)

diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index dd3d5942e669..c36bafbcd77e 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -951,7 +951,8 @@ static bool tomoyo_manager(void)
 	exe = tomoyo_get_exe();
 	if (!exe)
 		return false;
-	list_for_each_entry_rcu(ptr, &tomoyo_kernel_namespace.policy_list[TOMOYO_ID_MANAGER], head.list) {
+	list_for_each_entry_rcu(ptr, &tomoyo_kernel_namespace.policy_list[TOMOYO_ID_MANAGER], head.list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		if (!ptr->head.is_deleted &&
 		    (!tomoyo_pathcmp(domainname, ptr->manager) ||
 		     !strcmp(exe, ptr->manager->name))) {
@@ -1095,7 +1096,8 @@ static int tomoyo_delete_domain(char *domainname)
 	if (mutex_lock_interruptible(&tomoyo_policy_lock))
 		return -EINTR;
 	/* Is there an active domain? */
-	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
+	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		/* Never delete tomoyo_kernel_domain */
 		if (domain == &tomoyo_kernel_domain)
 			continue;
@@ -2778,7 +2780,8 @@ void tomoyo_check_profile(void)
 
 	tomoyo_policy_loaded = true;
 	pr_info("TOMOYO: 2.6.0\n");
-	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
+	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		const u8 profile = domain->profile;
 		struct tomoyo_policy_namespace *ns = domain->ns;
 
diff --git a/security/tomoyo/domain.c b/security/tomoyo/domain.c
index 8526a0a74023..7869d6a9980b 100644
--- a/security/tomoyo/domain.c
+++ b/security/tomoyo/domain.c
@@ -41,7 +41,8 @@ int tomoyo_update_policy(struct tomoyo_acl_head *new_entry, const int size,
 
 	if (mutex_lock_interruptible(&tomoyo_policy_lock))
 		return -ENOMEM;
-	list_for_each_entry_rcu(entry, list, list) {
+	list_for_each_entry_rcu(entry, list, list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		if (entry->is_deleted == TOMOYO_GC_IN_PROGRESS)
 			continue;
 		if (!check_duplicate(entry, new_entry))
@@ -119,7 +120,8 @@ int tomoyo_update_domain(struct tomoyo_acl_info *new_entry, const int size,
 	}
 	if (mutex_lock_interruptible(&tomoyo_policy_lock))
 		goto out;
-	list_for_each_entry_rcu(entry, list, list) {
+	list_for_each_entry_rcu(entry, list, list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		if (entry->is_deleted == TOMOYO_GC_IN_PROGRESS)
 			continue;
 		if (!tomoyo_same_acl_head(entry, new_entry) ||
@@ -166,7 +168,8 @@ void tomoyo_check_acl(struct tomoyo_request_info *r,
 	u16 i = 0;
 
 retry:
-	list_for_each_entry_rcu(ptr, list, list) {
+	list_for_each_entry_rcu(ptr, list, list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		if (ptr->is_deleted || ptr->type != r->param_type)
 			continue;
 		if (!check_entry(r, ptr))
@@ -298,7 +301,8 @@ static inline bool tomoyo_scan_transition
 {
 	const struct tomoyo_transition_control *ptr;
 
-	list_for_each_entry_rcu(ptr, list, head.list) {
+	list_for_each_entry_rcu(ptr, list, head.list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		if (ptr->head.is_deleted || ptr->type != type)
 			continue;
 		if (ptr->domainname) {
@@ -735,7 +739,8 @@ retry:
 
 		/* Check 'aggregator' directive. */
 		candidate = &exename;
-		list_for_each_entry_rcu(ptr, list, head.list) {
+		list_for_each_entry_rcu(ptr, list, head.list,
+					srcu_read_lock_held(&tomoyo_ss)) {
 			if (ptr->head.is_deleted ||
 			    !tomoyo_path_matches_pattern(&exename,
 							 ptr->original_name))
diff --git a/security/tomoyo/group.c b/security/tomoyo/group.c
index a37c7dc66e44..1cecdd797597 100644
--- a/security/tomoyo/group.c
+++ b/security/tomoyo/group.c
@@ -133,7 +133,8 @@ tomoyo_path_matches_group(const struct tomoyo_path_info *pathname,
 {
 	struct tomoyo_path_group *member;
 
-	list_for_each_entry_rcu(member, &group->member_list, head.list) {
+	list_for_each_entry_rcu(member, &group->member_list, head.list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		if (member->head.is_deleted)
 			continue;
 		if (!tomoyo_path_matches_pattern(pathname, member->member_name))
@@ -161,7 +162,8 @@ bool tomoyo_number_matches_group(const unsigned long min,
 	struct tomoyo_number_group *member;
 	bool matched = false;
 
-	list_for_each_entry_rcu(member, &group->member_list, head.list) {
+	list_for_each_entry_rcu(member, &group->member_list, head.list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		if (member->head.is_deleted)
 			continue;
 		if (min > member->number.values[1] ||
@@ -191,7 +193,8 @@ bool tomoyo_address_matches_group(const bool is_ipv6, const __be32 *address,
 	bool matched = false;
 	const u8 size = is_ipv6 ? 16 : 4;
 
-	list_for_each_entry_rcu(member, &group->member_list, head.list) {
+	list_for_each_entry_rcu(member, &group->member_list, head.list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		if (member->head.is_deleted)
 			continue;
 		if (member->address.is_ipv6 != is_ipv6)
diff --git a/security/tomoyo/util.c b/security/tomoyo/util.c
index 52752e1a84ed..eba0b3395851 100644
--- a/security/tomoyo/util.c
+++ b/security/tomoyo/util.c
@@ -594,7 +594,8 @@ struct tomoyo_domain_info *tomoyo_find_domain(const char *domainname)
 
 	name.name = domainname;
 	tomoyo_fill_path_info(&name);
-	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list) {
+	list_for_each_entry_rcu(domain, &tomoyo_domain_list, list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		if (!domain->is_deleted &&
 		    !tomoyo_pathcmp(&name, domain->domainname))
 			return domain;
@@ -1028,7 +1029,8 @@ bool tomoyo_domain_quota_is_ok(struct tomoyo_request_info *r)
 		return false;
 	if (!domain)
 		return true;
-	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list) {
+	list_for_each_entry_rcu(ptr, &domain->acl_info_list, list,
+				srcu_read_lock_held(&tomoyo_ss)) {
 		u16 perm;
 		u8 i;
 
-- 
2.20.1

[PATCH 5.4 190/203] MIPS: Prevent link failure with kcov instrumentation

[Greg Kroah-Hartman]

From: Jouni Hogander <jouni.hogander@unikie.com>

[ Upstream commit a4a3893114a41e365274d5fab5d9ff5acc235ff0 ]

__sanitizer_cov_trace_pc() is not linked in and causing link
failure if KCOV_INSTRUMENT is enabled. Fix this by disabling
instrumentation for compressed image.

Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/boot/compressed/Makefile | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 172801ed35b8..d859f079b771 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -29,6 +29,9 @@ KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
 	-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
 
+# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
+KCOV_INSTRUMENT		:= n
+
 # decompressor objects (linked with vmlinuz)
 vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o
 
-- 
2.20.1

[PATCH 5.4 191/203] drm/arm/mali: make malidp_mw_connector_helper_funcs static

[Greg Kroah-Hartman]

From: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>

[ Upstream commit ac2917b01992c098b8d4e6837115e3ca347fdd90 ]

The malidp_mw_connector_helper_funcs is not referenced by name
outside of the file it is in, so make it static to avoid the
following warning:

drivers/gpu/drm/arm/malidp_mw.c:59:41: warning: symbol 'malidp_mw_connector_helper_funcs' was not declared. Should it be static?

Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217115309.2133503-1-ben.dooks@codethink.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/arm/malidp_mw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/arm/malidp_mw.c b/drivers/gpu/drm/arm/malidp_mw.c
index 875a3a9eabfa..7d0e7b031e44 100644
--- a/drivers/gpu/drm/arm/malidp_mw.c
+++ b/drivers/gpu/drm/arm/malidp_mw.c
@@ -56,7 +56,7 @@ malidp_mw_connector_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-const struct drm_connector_helper_funcs malidp_mw_connector_helper_funcs = {
+static const struct drm_connector_helper_funcs malidp_mw_connector_helper_funcs = {
 	.get_modes = malidp_mw_connector_get_modes,
 	.mode_valid = malidp_mw_connector_mode_valid,
 };
-- 
2.20.1

[PATCH 5.4 192/203] rxrpc: Unlock new call in rxrpc_new_incoming_call() rather than the caller

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit f33121cbe91973a08e68e4bde8c3f7e6e4e351c1 ]

Move the unlock and the ping transmission for a new incoming call into
rxrpc_new_incoming_call() rather than doing it in the caller.  This makes
it clearer to see what's going on.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
cc: Ingo Molnar <mingo@redhat.com>
cc: Will Deacon <will@kernel.org>
cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/call_accept.c | 36 ++++++++++++++++++++++++++++--------
 net/rxrpc/input.c       | 18 ------------------
 2 files changed, 28 insertions(+), 26 deletions(-)

diff --git a/net/rxrpc/call_accept.c b/net/rxrpc/call_accept.c
index 135bf5cd8dd5..3685b1732f65 100644
--- a/net/rxrpc/call_accept.c
+++ b/net/rxrpc/call_accept.c
@@ -239,6 +239,22 @@ void rxrpc_discard_prealloc(struct rxrpc_sock *rx)
 	kfree(b);
 }
 
+/*
+ * Ping the other end to fill our RTT cache and to retrieve the rwind
+ * and MTU parameters.
+ */
+static void rxrpc_send_ping(struct rxrpc_call *call, struct sk_buff *skb)
+{
+	struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
+	ktime_t now = skb->tstamp;
+
+	if (call->peer->rtt_usage < 3 ||
+	    ktime_before(ktime_add_ms(call->peer->rtt_last_req, 1000), now))
+		rxrpc_propose_ACK(call, RXRPC_ACK_PING, sp->hdr.serial,
+				  true, true,
+				  rxrpc_propose_ack_ping_for_params);
+}
+
 /*
  * Allocate a new incoming call from the prealloc pool, along with a connection
  * and a peer as necessary.
@@ -346,9 +362,7 @@ struct rxrpc_call *rxrpc_new_incoming_call(struct rxrpc_local *local,
 				  sp->hdr.seq, RX_INVALID_OPERATION, ESHUTDOWN);
 		skb->mark = RXRPC_SKB_MARK_REJECT_ABORT;
 		skb->priority = RX_INVALID_OPERATION;
-		_leave(" = NULL [close]");
-		call = NULL;
-		goto out;
+		goto no_call;
 	}
 
 	/* The peer, connection and call may all have sprung into existence due
@@ -361,9 +375,7 @@ struct rxrpc_call *rxrpc_new_incoming_call(struct rxrpc_local *local,
 	call = rxrpc_alloc_incoming_call(rx, local, peer, conn, skb);
 	if (!call) {
 		skb->mark = RXRPC_SKB_MARK_REJECT_BUSY;
-		_leave(" = NULL [busy]");
-		call = NULL;
-		goto out;
+		goto no_call;
 	}
 
 	trace_rxrpc_receive(call, rxrpc_receive_incoming,
@@ -432,10 +444,18 @@ struct rxrpc_call *rxrpc_new_incoming_call(struct rxrpc_local *local,
 	 */
 	rxrpc_put_call(call, rxrpc_call_put);
 
-	_leave(" = %p{%d}", call, call->debug_id);
-out:
 	spin_unlock(&rx->incoming_lock);
+
+	rxrpc_send_ping(call, skb);
+	mutex_unlock(&call->user_mutex);
+
+	_leave(" = %p{%d}", call, call->debug_id);
 	return call;
+
+no_call:
+	spin_unlock(&rx->incoming_lock);
+	_leave(" = NULL [%u]", skb->mark);
+	return NULL;
 }
 
 /*
diff --git a/net/rxrpc/input.c b/net/rxrpc/input.c
index 157be1ff8697..86bd133b4fa0 100644
--- a/net/rxrpc/input.c
+++ b/net/rxrpc/input.c
@@ -192,22 +192,6 @@ send_extra_data:
 	goto out_no_clear_ca;
 }
 
-/*
- * Ping the other end to fill our RTT cache and to retrieve the rwind
- * and MTU parameters.
- */
-static void rxrpc_send_ping(struct rxrpc_call *call, struct sk_buff *skb)
-{
-	struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
-	ktime_t now = skb->tstamp;
-
-	if (call->peer->rtt_usage < 3 ||
-	    ktime_before(ktime_add_ms(call->peer->rtt_last_req, 1000), now))
-		rxrpc_propose_ACK(call, RXRPC_ACK_PING, sp->hdr.serial,
-				  true, true,
-				  rxrpc_propose_ack_ping_for_params);
-}
-
 /*
  * Apply a hard ACK by advancing the Tx window.
  */
@@ -1396,8 +1380,6 @@ int rxrpc_input_packet(struct sock *udp_sk, struct sk_buff *skb)
 		call = rxrpc_new_incoming_call(local, rx, skb);
 		if (!call)
 			goto reject_packet;
-		rxrpc_send_ping(call, skb);
-		mutex_unlock(&call->user_mutex);
 	}
 
 	/* Process a call packet; this either discards or passes on the ref
-- 
2.20.1

[PATCH 5.4 193/203] rxrpc: Dont take call->user_mutex in rxrpc_new_incoming_call()

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 13b7955a0252e15265386b229b814152f109b234 ]

Standard kernel mutexes cannot be used in any way from interrupt or softirq
context, so the user_mutex which manages access to a call cannot be a mutex
since on a new call the mutex must start off locked and be unlocked within
the softirq handler to prevent userspace interfering with a call we're
setting up.

Commit a0855d24fc22d49cdc25664fb224caee16998683 ("locking/mutex: Complain
upon mutex API misuse in IRQ contexts") causes big warnings to be splashed
in dmesg for each a new call that comes in from the server.  Whilst it
*seems* like it should be okay, since the accept path uses trylock, there
are issues with PI boosting and marking the wrong task as the owner.

Fix this by not taking the mutex in the softirq path at all.  It's not
obvious that there should be any need for it as the state is set before the
first notification is generated for the new call.

There's also no particular reason why the link-assessing ping should be
triggered inside the mutex.  It's not actually transmitted there anyway,
but rather it has to be deferred to a workqueue.

Further, I don't think that there's any particular reason that the socket
notification needs to be done from within rx->incoming_lock, so the amount
of time that lock is held can be shortened too and the ping prepared before
the new call notification is sent.

Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Peter Zijlstra (Intel) <peterz@infradead.org>
cc: Ingo Molnar <mingo@redhat.com>
cc: Will Deacon <will@kernel.org>
cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/call_accept.c | 20 +++-----------------
 1 file changed, 3 insertions(+), 17 deletions(-)

diff --git a/net/rxrpc/call_accept.c b/net/rxrpc/call_accept.c
index 3685b1732f65..44fa22b020ef 100644
--- a/net/rxrpc/call_accept.c
+++ b/net/rxrpc/call_accept.c
@@ -381,18 +381,6 @@ struct rxrpc_call *rxrpc_new_incoming_call(struct rxrpc_local *local,
 	trace_rxrpc_receive(call, rxrpc_receive_incoming,
 			    sp->hdr.serial, sp->hdr.seq);
 
-	/* Lock the call to prevent rxrpc_kernel_send/recv_data() and
-	 * sendmsg()/recvmsg() inconveniently stealing the mutex once the
-	 * notification is generated.
-	 *
-	 * The BUG should never happen because the kernel should be well
-	 * behaved enough not to access the call before the first notification
-	 * event and userspace is prevented from doing so until the state is
-	 * appropriate.
-	 */
-	if (!mutex_trylock(&call->user_mutex))
-		BUG();
-
 	/* Make the call live. */
 	rxrpc_incoming_call(rx, call, skb);
 	conn = call->conn;
@@ -433,6 +421,9 @@ struct rxrpc_call *rxrpc_new_incoming_call(struct rxrpc_local *local,
 		BUG();
 	}
 	spin_unlock(&conn->state_lock);
+	spin_unlock(&rx->incoming_lock);
+
+	rxrpc_send_ping(call, skb);
 
 	if (call->state == RXRPC_CALL_SERVER_ACCEPTING)
 		rxrpc_notify_socket(call);
@@ -444,11 +435,6 @@ struct rxrpc_call *rxrpc_new_incoming_call(struct rxrpc_local *local,
 	 */
 	rxrpc_put_call(call, rxrpc_call_put);
 
-	spin_unlock(&rx->incoming_lock);
-
-	rxrpc_send_ping(call, skb);
-	mutex_unlock(&call->user_mutex);
-
 	_leave(" = %p{%d}", call, call->debug_id);
 	return call;
 
-- 
2.20.1

[PATCH 5.4 194/203] rxrpc: Fix missing security check on incoming calls

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 063c60d39180cec7c9317f5acfc3071f8fecd705 ]

Fix rxrpc_new_incoming_call() to check that we have a suitable service key
available for the combination of service ID and security class of a new
incoming call - and to reject calls for which we don't.

This causes an assertion like the following to appear:

	rxrpc: Assertion failed - 6(0x6) == 12(0xc) is false
	kernel BUG at net/rxrpc/call_object.c:456!

Where call->state is RXRPC_CALL_SERVER_SECURING (6) rather than
RXRPC_CALL_COMPLETE (12).

Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/ar-internal.h  | 10 ++++--
 net/rxrpc/call_accept.c  | 14 ++++++--
 net/rxrpc/conn_event.c   | 16 +--------
 net/rxrpc/conn_service.c |  4 +++
 net/rxrpc/rxkad.c        |  5 +--
 net/rxrpc/security.c     | 70 +++++++++++++++++++---------------------
 6 files changed, 59 insertions(+), 60 deletions(-)

diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h
index 7c7d10f2e0c1..5e99df80e80a 100644
--- a/net/rxrpc/ar-internal.h
+++ b/net/rxrpc/ar-internal.h
@@ -209,6 +209,7 @@ struct rxrpc_skb_priv {
 struct rxrpc_security {
 	const char		*name;		/* name of this service */
 	u8			security_index;	/* security type provided */
+	u32			no_key_abort;	/* Abort code indicating no key */
 
 	/* Initialise a security service */
 	int (*init)(void);
@@ -977,8 +978,9 @@ static inline void rxrpc_reduce_conn_timer(struct rxrpc_connection *conn,
 struct rxrpc_connection *rxrpc_find_service_conn_rcu(struct rxrpc_peer *,
 						     struct sk_buff *);
 struct rxrpc_connection *rxrpc_prealloc_service_connection(struct rxrpc_net *, gfp_t);
-void rxrpc_new_incoming_connection(struct rxrpc_sock *,
-				   struct rxrpc_connection *, struct sk_buff *);
+void rxrpc_new_incoming_connection(struct rxrpc_sock *, struct rxrpc_connection *,
+				   const struct rxrpc_security *, struct key *,
+				   struct sk_buff *);
 void rxrpc_unpublish_service_conn(struct rxrpc_connection *);
 
 /*
@@ -1103,7 +1105,9 @@ extern const struct rxrpc_security rxkad;
 int __init rxrpc_init_security(void);
 void rxrpc_exit_security(void);
 int rxrpc_init_client_conn_security(struct rxrpc_connection *);
-int rxrpc_init_server_conn_security(struct rxrpc_connection *);
+bool rxrpc_look_up_server_security(struct rxrpc_local *, struct rxrpc_sock *,
+				   const struct rxrpc_security **, struct key **,
+				   struct sk_buff *);
 
 /*
  * sendmsg.c
diff --git a/net/rxrpc/call_accept.c b/net/rxrpc/call_accept.c
index 44fa22b020ef..70e44abf106c 100644
--- a/net/rxrpc/call_accept.c
+++ b/net/rxrpc/call_accept.c
@@ -263,6 +263,8 @@ static struct rxrpc_call *rxrpc_alloc_incoming_call(struct rxrpc_sock *rx,
 						    struct rxrpc_local *local,
 						    struct rxrpc_peer *peer,
 						    struct rxrpc_connection *conn,
+						    const struct rxrpc_security *sec,
+						    struct key *key,
 						    struct sk_buff *skb)
 {
 	struct rxrpc_backlog *b = rx->backlog;
@@ -310,7 +312,7 @@ static struct rxrpc_call *rxrpc_alloc_incoming_call(struct rxrpc_sock *rx,
 		conn->params.local = rxrpc_get_local(local);
 		conn->params.peer = peer;
 		rxrpc_see_connection(conn);
-		rxrpc_new_incoming_connection(rx, conn, skb);
+		rxrpc_new_incoming_connection(rx, conn, sec, key, skb);
 	} else {
 		rxrpc_get_connection(conn);
 	}
@@ -349,9 +351,11 @@ struct rxrpc_call *rxrpc_new_incoming_call(struct rxrpc_local *local,
 					   struct sk_buff *skb)
 {
 	struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
+	const struct rxrpc_security *sec = NULL;
 	struct rxrpc_connection *conn;
 	struct rxrpc_peer *peer = NULL;
-	struct rxrpc_call *call;
+	struct rxrpc_call *call = NULL;
+	struct key *key = NULL;
 
 	_enter("");
 
@@ -372,7 +376,11 @@ struct rxrpc_call *rxrpc_new_incoming_call(struct rxrpc_local *local,
 	 */
 	conn = rxrpc_find_connection_rcu(local, skb, &peer);
 
-	call = rxrpc_alloc_incoming_call(rx, local, peer, conn, skb);
+	if (!conn && !rxrpc_look_up_server_security(local, rx, &sec, &key, skb))
+		goto no_call;
+
+	call = rxrpc_alloc_incoming_call(rx, local, peer, conn, sec, key, skb);
+	key_put(key);
 	if (!call) {
 		skb->mark = RXRPC_SKB_MARK_REJECT_BUSY;
 		goto no_call;
diff --git a/net/rxrpc/conn_event.c b/net/rxrpc/conn_event.c
index a1ceef4f5cd0..808a4723f868 100644
--- a/net/rxrpc/conn_event.c
+++ b/net/rxrpc/conn_event.c
@@ -376,21 +376,7 @@ static void rxrpc_secure_connection(struct rxrpc_connection *conn)
 	_enter("{%d}", conn->debug_id);
 
 	ASSERT(conn->security_ix != 0);
-
-	if (!conn->params.key) {
-		_debug("set up security");
-		ret = rxrpc_init_server_conn_security(conn);
-		switch (ret) {
-		case 0:
-			break;
-		case -ENOENT:
-			abort_code = RX_CALL_DEAD;
-			goto abort;
-		default:
-			abort_code = RXKADNOAUTH;
-			goto abort;
-		}
-	}
+	ASSERT(conn->server_key);
 
 	if (conn->security->issue_challenge(conn) < 0) {
 		abort_code = RX_CALL_DEAD;
diff --git a/net/rxrpc/conn_service.c b/net/rxrpc/conn_service.c
index 123d6ceab15c..21da48e3d2e5 100644
--- a/net/rxrpc/conn_service.c
+++ b/net/rxrpc/conn_service.c
@@ -148,6 +148,8 @@ struct rxrpc_connection *rxrpc_prealloc_service_connection(struct rxrpc_net *rxn
  */
 void rxrpc_new_incoming_connection(struct rxrpc_sock *rx,
 				   struct rxrpc_connection *conn,
+				   const struct rxrpc_security *sec,
+				   struct key *key,
 				   struct sk_buff *skb)
 {
 	struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
@@ -160,6 +162,8 @@ void rxrpc_new_incoming_connection(struct rxrpc_sock *rx,
 	conn->service_id	= sp->hdr.serviceId;
 	conn->security_ix	= sp->hdr.securityIndex;
 	conn->out_clientflag	= 0;
+	conn->security		= sec;
+	conn->server_key	= key_get(key);
 	if (conn->security_ix)
 		conn->state	= RXRPC_CONN_SERVICE_UNSECURED;
 	else
diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c
index 8d8aa3c230b5..098f1f9ec53b 100644
--- a/net/rxrpc/rxkad.c
+++ b/net/rxrpc/rxkad.c
@@ -648,9 +648,9 @@ static int rxkad_issue_challenge(struct rxrpc_connection *conn)
 	u32 serial;
 	int ret;
 
-	_enter("{%d,%x}", conn->debug_id, key_serial(conn->params.key));
+	_enter("{%d,%x}", conn->debug_id, key_serial(conn->server_key));
 
-	ret = key_validate(conn->params.key);
+	ret = key_validate(conn->server_key);
 	if (ret < 0)
 		return ret;
 
@@ -1293,6 +1293,7 @@ static void rxkad_exit(void)
 const struct rxrpc_security rxkad = {
 	.name				= "rxkad",
 	.security_index			= RXRPC_SECURITY_RXKAD,
+	.no_key_abort			= RXKADUNKNOWNKEY,
 	.init				= rxkad_init,
 	.exit				= rxkad_exit,
 	.init_connection_security	= rxkad_init_connection_security,
diff --git a/net/rxrpc/security.c b/net/rxrpc/security.c
index a4c47d2b7054..9b1fb9ed0717 100644
--- a/net/rxrpc/security.c
+++ b/net/rxrpc/security.c
@@ -101,62 +101,58 @@ int rxrpc_init_client_conn_security(struct rxrpc_connection *conn)
 }
 
 /*
- * initialise the security on a server connection
+ * Find the security key for a server connection.
  */
-int rxrpc_init_server_conn_security(struct rxrpc_connection *conn)
+bool rxrpc_look_up_server_security(struct rxrpc_local *local, struct rxrpc_sock *rx,
+				   const struct rxrpc_security **_sec,
+				   struct key **_key,
+				   struct sk_buff *skb)
 {
 	const struct rxrpc_security *sec;
-	struct rxrpc_local *local = conn->params.local;
-	struct rxrpc_sock *rx;
-	struct key *key;
-	key_ref_t kref;
+	struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
+	key_ref_t kref = NULL;
 	char kdesc[5 + 1 + 3 + 1];
 
 	_enter("");
 
-	sprintf(kdesc, "%u:%u", conn->service_id, conn->security_ix);
+	sprintf(kdesc, "%u:%u", sp->hdr.serviceId, sp->hdr.securityIndex);
 
-	sec = rxrpc_security_lookup(conn->security_ix);
+	sec = rxrpc_security_lookup(sp->hdr.securityIndex);
 	if (!sec) {
-		_leave(" = -ENOKEY [lookup]");
-		return -ENOKEY;
+		trace_rxrpc_abort(0, "SVS",
+				  sp->hdr.cid, sp->hdr.callNumber, sp->hdr.seq,
+				  RX_INVALID_OPERATION, EKEYREJECTED);
+		skb->mark = RXRPC_SKB_MARK_REJECT_ABORT;
+		skb->priority = RX_INVALID_OPERATION;
+		return false;
 	}
 
-	/* find the service */
-	read_lock(&local->services_lock);
-	rx = rcu_dereference_protected(local->service,
-				       lockdep_is_held(&local->services_lock));
-	if (rx && (rx->srx.srx_service == conn->service_id ||
-		   rx->second_service == conn->service_id))
-		goto found_service;
+	if (sp->hdr.securityIndex == RXRPC_SECURITY_NONE)
+		goto out;
 
-	/* the service appears to have died */
-	read_unlock(&local->services_lock);
-	_leave(" = -ENOENT");
-	return -ENOENT;
-
-found_service:
 	if (!rx->securities) {
-		read_unlock(&local->services_lock);
-		_leave(" = -ENOKEY");
-		return -ENOKEY;
+		trace_rxrpc_abort(0, "SVR",
+				  sp->hdr.cid, sp->hdr.callNumber, sp->hdr.seq,
+				  RX_INVALID_OPERATION, EKEYREJECTED);
+		skb->mark = RXRPC_SKB_MARK_REJECT_ABORT;
+		skb->priority = RX_INVALID_OPERATION;
+		return false;
 	}
 
 	/* look through the service's keyring */
 	kref = keyring_search(make_key_ref(rx->securities, 1UL),
 			      &key_type_rxrpc_s, kdesc, true);
 	if (IS_ERR(kref)) {
-		read_unlock(&local->services_lock);
-		_leave(" = %ld [search]", PTR_ERR(kref));
-		return PTR_ERR(kref);
+		trace_rxrpc_abort(0, "SVK",
+				  sp->hdr.cid, sp->hdr.callNumber, sp->hdr.seq,
+				  sec->no_key_abort, EKEYREJECTED);
+		skb->mark = RXRPC_SKB_MARK_REJECT_ABORT;
+		skb->priority = sec->no_key_abort;
+		return false;
 	}
 
-	key = key_ref_to_ptr(kref);
-	read_unlock(&local->services_lock);
-
-	conn->server_key = key;
-	conn->security = sec;
-
-	_leave(" = 0");
-	return 0;
+out:
+	*_sec = sec;
+	*_key = key_ref_to_ptr(kref);
+	return true;
 }
-- 
2.20.1

[PATCH 5.4 195/203] dmaengine: k3dma: Avoid null pointer traversal

[Greg Kroah-Hartman]

From: John Stultz <john.stultz@linaro.org>

[ Upstream commit 2f42e05b942fe2fbfb9bbc6e34e1dd8c3ce4f3a4 ]

In some cases we seem to submit two transactions in a row, which
causes us to lose track of the first. If we then cancel the
request, we may still get an interrupt, which traverses a null
ds_run value.

So try to avoid starting a new transaction if the ds_run value
is set.

While this patch avoids the null pointer crash, I've had some
reports of the k3dma driver still getting confused, which
suggests the ds_run/ds_done value handling still isn't quite
right. However, I've not run into an issue recently with it
so I think this patch is worth pushing upstream to avoid the
crash.

Signed-off-by: John Stultz <john.stultz@linaro.org>
[add ss tag]
Link: https://lore.kernel.org/r/20191218190906.6641-1-john.stultz@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/k3dma.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c
index 4b36c8810517..d05471653224 100644
--- a/drivers/dma/k3dma.c
+++ b/drivers/dma/k3dma.c
@@ -229,9 +229,11 @@ static irqreturn_t k3_dma_int_handler(int irq, void *dev_id)
 			c = p->vchan;
 			if (c && (tc1 & BIT(i))) {
 				spin_lock_irqsave(&c->vc.lock, flags);
-				vchan_cookie_complete(&p->ds_run->vd);
-				p->ds_done = p->ds_run;
-				p->ds_run = NULL;
+				if (p->ds_run != NULL) {
+					vchan_cookie_complete(&p->ds_run->vd);
+					p->ds_done = p->ds_run;
+					p->ds_run = NULL;
+				}
 				spin_unlock_irqrestore(&c->vc.lock, flags);
 			}
 			if (c && (tc2 & BIT(i))) {
@@ -271,6 +273,10 @@ static int k3_dma_start_txd(struct k3_dma_chan *c)
 	if (BIT(c->phy->idx) & k3_dma_get_chan_stat(d))
 		return -EAGAIN;
 
+	/* Avoid losing track of  ds_run if a transaction is in flight */
+	if (c->phy->ds_run)
+		return -EAGAIN;
+
 	if (vd) {
 		struct k3_dma_desc_sw *ds =
 			container_of(vd, struct k3_dma_desc_sw, vd);
-- 
2.20.1

[PATCH 5.4 196/203] s390/qeth: lock the card while changing its hsuid

[Greg Kroah-Hartman]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 5b6c7b55cfe26224b0f41b1c226d3534c542787f ]

qeth_l3_dev_hsuid_store() initially checks the card state, but doesn't
take the conf_mutex to ensure that the card stays in this state while
being reconfigured.

Rework the code to take this lock, and drop a redundant state check in a
helper function.

Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c |  5 ----
 drivers/s390/net/qeth_l3_sys.c    | 40 +++++++++++++++++++++----------
 2 files changed, 28 insertions(+), 17 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 94e5b6e15ef9..5be4d800e4ba 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3378,11 +3378,6 @@ int qeth_configure_cq(struct qeth_card *card, enum qeth_cq cq)
 			goto out;
 		}
 
-		if (card->state != CARD_STATE_DOWN) {
-			rc = -1;
-			goto out;
-		}
-
 		qeth_free_qdio_queues(card);
 		card->options.cq = cq;
 		rc = 0;
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index 2f73b33c9347..333fd4619dc6 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -270,24 +270,36 @@ static ssize_t qeth_l3_dev_hsuid_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct qeth_card *card = dev_get_drvdata(dev);
+	int rc = 0;
 	char *tmp;
-	int rc;
 
 	if (!card)
 		return -EINVAL;
 
 	if (!IS_IQD(card))
 		return -EPERM;
-	if (card->state != CARD_STATE_DOWN)
-		return -EPERM;
-	if (card->options.sniffer)
-		return -EPERM;
-	if (card->options.cq == QETH_CQ_NOTAVAILABLE)
-		return -EPERM;
+
+	mutex_lock(&card->conf_mutex);
+	if (card->state != CARD_STATE_DOWN) {
+		rc = -EPERM;
+		goto out;
+	}
+
+	if (card->options.sniffer) {
+		rc = -EPERM;
+		goto out;
+	}
+
+	if (card->options.cq == QETH_CQ_NOTAVAILABLE) {
+		rc = -EPERM;
+		goto out;
+	}
 
 	tmp = strsep((char **)&buf, "\n");
-	if (strlen(tmp) > 8)
-		return -EINVAL;
+	if (strlen(tmp) > 8) {
+		rc = -EINVAL;
+		goto out;
+	}
 
 	if (card->options.hsuid[0])
 		/* delete old ip address */
@@ -298,11 +310,13 @@ static ssize_t qeth_l3_dev_hsuid_store(struct device *dev,
 		card->options.hsuid[0] = '\0';
 		memcpy(card->dev->perm_addr, card->options.hsuid, 9);
 		qeth_configure_cq(card, QETH_CQ_DISABLED);
-		return count;
+		goto out;
 	}
 
-	if (qeth_configure_cq(card, QETH_CQ_ENABLED))
-		return -EPERM;
+	if (qeth_configure_cq(card, QETH_CQ_ENABLED)) {
+		rc = -EPERM;
+		goto out;
+	}
 
 	snprintf(card->options.hsuid, sizeof(card->options.hsuid),
 		 "%-8s", tmp);
@@ -311,6 +325,8 @@ static ssize_t qeth_l3_dev_hsuid_store(struct device *dev,
 
 	rc = qeth_l3_modify_hsuid(card, true);
 
+out:
+	mutex_unlock(&card->conf_mutex);
 	return rc ? rc : count;
 }
 
-- 
2.20.1

[PATCH 5.4 197/203] ioat: ioat_alloc_ring() failure handling.

[Greg Kroah-Hartman]

From: Alexander.Barabash@dell.com <Alexander.Barabash@dell.com>

[ Upstream commit b0b5ce1010ffc50015eaec72b0028aaae3f526bb ]

If dma_alloc_coherent() returns NULL in ioat_alloc_ring(), ring
allocation must not proceed.

Until now, if the first call to dma_alloc_coherent() in
ioat_alloc_ring() returned NULL, the processing could proceed, failing
with NULL-pointer dereferencing further down the line.

Signed-off-by: Alexander Barabash <alexander.barabash@dell.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/75e9c0e84c3345d693c606c64f8b9ab5@x13pwhopdag1307.AMER.DELL.COM
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ioat/dma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index 1a422a8b43cf..18c011e57592 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -377,10 +377,11 @@ ioat_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
 
 		descs->virt = dma_alloc_coherent(to_dev(ioat_chan),
 						 SZ_2M, &descs->hw, flags);
-		if (!descs->virt && (i > 0)) {
+		if (!descs->virt) {
 			int idx;
 
 			for (idx = 0; idx < i; idx++) {
+				descs = &ioat_chan->descs[idx];
 				dma_free_coherent(to_dev(ioat_chan), SZ_2M,
 						  descs->virt, descs->hw);
 				descs->virt = NULL;
-- 
2.20.1

[PATCH 5.4 198/203] drm/amdgpu: enable gfxoff for raven1 refresh

[Greg Kroah-Hartman]

From: changzhu <Changfeng.Zhu@amd.com>

[ Upstream commit e0c63812352298efbce2a71483c1dab627d0c288 ]

When smu version is larger than 0x41e2b, it will load
raven_kicker_rlc.bin.To enable gfxoff for raven_kicker_rlc.bin,it
needs to avoid adev->pm.pp_feature &= ~PP_GFXOFF_MASK when it loads
raven_kicker_rlc.bin.

Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index c9ba2ec6d038..ab4a0d8545dc 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1038,17 +1038,10 @@ static void gfx_v9_0_check_if_need_gfxoff(struct amdgpu_device *adev)
 	case CHIP_VEGA20:
 		break;
 	case CHIP_RAVEN:
-		/* Disable GFXOFF on original raven.  There are combinations
-		 * of sbios and platforms that are not stable.
-		 */
-		if (!(adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8))
-			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
-		else if (!(adev->rev_id >= 0x8 || adev->pdev->device == 0x15d8)
-			 &&((adev->gfx.rlc_fw_version != 106 &&
-			     adev->gfx.rlc_fw_version < 531) ||
-			    (adev->gfx.rlc_fw_version == 53815) ||
-			    (adev->gfx.rlc_feature_version < 1) ||
-			    !adev->gfx.rlc.is_rlc_v2_1))
+		if (!(adev->rev_id >= 0x8 ||
+		      adev->pdev->device == 0x15d8) &&
+		    (adev->pm.fw_version < 0x41e2b || /* not raven1 fresh */
+		     !adev->gfx.rlc.is_rlc_v2_1)) /* without rlc save restore ucodes */
 			adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
 
 		if (adev->pm.pp_feature & PP_GFXOFF_MASK)
-- 
2.20.1

[PATCH 5.4 199/203] media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes

[Greg Kroah-Hartman]

From: Sakari Ailus <sakari.ailus@linux.intel.com>

[ Upstream commit ce644cf3fa06504c2c71ab1b794160d54aaccbc0 ]

A struct that needs to be aligned to 32 bytes has a size of 28. Increase
the size to 32.

This makes elements of arrays of this struct aligned to 32 as well, and
other structs where members are aligned to 32 mixing
ipu3_uapi_awb_fr_config_s as well as other types.

Fixes: commit dca5ef2aa1e6 ("media: staging/intel-ipu3: remove the unnecessary compiler flags")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/ipu3/include/intel-ipu3.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/media/ipu3/include/intel-ipu3.h b/drivers/staging/media/ipu3/include/intel-ipu3.h
index c7cd27efac8a..0b1cb9f9cbd1 100644
--- a/drivers/staging/media/ipu3/include/intel-ipu3.h
+++ b/drivers/staging/media/ipu3/include/intel-ipu3.h
@@ -449,7 +449,7 @@ struct ipu3_uapi_awb_fr_config_s {
 	__u16 reserved1;
 	__u32 bayer_sign;
 	__u8 bayer_nf;
-	__u8 reserved2[3];
+	__u8 reserved2[7];
 } __attribute__((aligned(32))) __packed;
 
 /**
-- 
2.20.1

[PATCH 5.4 200/203] kbuild/deb-pkg: annotate libelf-dev dependency as :native

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 8ffdc54b6f4cd718a45802e645bb853e3a46a078 ]

Cross compiling the x86 kernel on a non-x86 build machine produces
the following error when CONFIG_UNWINDER_ORC is enabled, regardless
of whether libelf-dev is installed or not.

  dpkg-checkbuilddeps: error: Unmet build dependencies: libelf-dev
  dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting
  dpkg-buildpackage: warning: (Use -d flag to override.)

Since this is a build time dependency for a build tool, we need to
depend on the native version of libelf-dev so add the appropriate
annotation.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/package/mkdebian | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/package/mkdebian b/scripts/package/mkdebian
index 7c230016b08d..357dc56bcf30 100755
--- a/scripts/package/mkdebian
+++ b/scripts/package/mkdebian
@@ -136,7 +136,7 @@ mkdir -p debian/source/
 echo "1.0" > debian/source/format
 
 echo $debarch > debian/arch
-extra_build_depends=", $(if_enabled_echo CONFIG_UNWINDER_ORC libelf-dev)"
+extra_build_depends=", $(if_enabled_echo CONFIG_UNWINDER_ORC libelf-dev:native)"
 extra_build_depends="$extra_build_depends, $(if_enabled_echo CONFIG_SYSTEM_TRUSTED_KEYRING libssl-dev:native)"
 
 # Generate a simple changelog template
-- 
2.20.1

[PATCH 5.4 201/203] hexagon: parenthesize registers in asm predicates

[Greg Kroah-Hartman]

From: Nick Desaulniers <ndesaulniers@google.com>

[ Upstream commit 780a0cfda9006a9a22d6473c2d4c527f5c68eb2e ]

Hexagon requires that register predicates in assembly be parenthesized.

Link: https://github.com/ClangBuiltLinux/linux/issues/754
Link: http://lkml.kernel.org/r/20191209222956.239798-3-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Sid Manning <sidneym@codeaurora.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Tuowen Zhao <ztuowen@gmail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Will Deacon <will@kernel.org>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/hexagon/include/asm/atomic.h   |  8 ++++----
 arch/hexagon/include/asm/bitops.h   |  8 ++++----
 arch/hexagon/include/asm/cmpxchg.h  |  2 +-
 arch/hexagon/include/asm/futex.h    |  6 +++---
 arch/hexagon/include/asm/spinlock.h | 20 ++++++++++----------
 arch/hexagon/kernel/vm_entry.S      |  2 +-
 6 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/arch/hexagon/include/asm/atomic.h b/arch/hexagon/include/asm/atomic.h
index 12cd9231c4b8..0231d69c8bf2 100644
--- a/arch/hexagon/include/asm/atomic.h
+++ b/arch/hexagon/include/asm/atomic.h
@@ -91,7 +91,7 @@ static inline void atomic_##op(int i, atomic_t *v)			\
 		"1:	%0 = memw_locked(%1);\n"			\
 		"	%0 = "#op "(%0,%2);\n"				\
 		"	memw_locked(%1,P3)=%0;\n"			\
-		"	if !P3 jump 1b;\n"				\
+		"	if (!P3) jump 1b;\n"				\
 		: "=&r" (output)					\
 		: "r" (&v->counter), "r" (i)				\
 		: "memory", "p3"					\
@@ -107,7 +107,7 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 		"1:	%0 = memw_locked(%1);\n"			\
 		"	%0 = "#op "(%0,%2);\n"				\
 		"	memw_locked(%1,P3)=%0;\n"			\
-		"	if !P3 jump 1b;\n"				\
+		"	if (!P3) jump 1b;\n"				\
 		: "=&r" (output)					\
 		: "r" (&v->counter), "r" (i)				\
 		: "memory", "p3"					\
@@ -124,7 +124,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 		"1:	%0 = memw_locked(%2);\n"			\
 		"	%1 = "#op "(%0,%3);\n"				\
 		"	memw_locked(%2,P3)=%1;\n"			\
-		"	if !P3 jump 1b;\n"				\
+		"	if (!P3) jump 1b;\n"				\
 		: "=&r" (output), "=&r" (val)				\
 		: "r" (&v->counter), "r" (i)				\
 		: "memory", "p3"					\
@@ -173,7 +173,7 @@ static inline int atomic_fetch_add_unless(atomic_t *v, int a, int u)
 		"	}"
 		"	memw_locked(%2, p3) = %1;"
 		"	{"
-		"		if !p3 jump 1b;"
+		"		if (!p3) jump 1b;"
 		"	}"
 		"2:"
 		: "=&r" (__oldval), "=&r" (tmp)
diff --git a/arch/hexagon/include/asm/bitops.h b/arch/hexagon/include/asm/bitops.h
index 47384b094b94..71429f756af0 100644
--- a/arch/hexagon/include/asm/bitops.h
+++ b/arch/hexagon/include/asm/bitops.h
@@ -38,7 +38,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr)
 	"1:	R12 = memw_locked(R10);\n"
 	"	{ P0 = tstbit(R12,R11); R12 = clrbit(R12,R11); }\n"
 	"	memw_locked(R10,P1) = R12;\n"
-	"	{if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+	"	{if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
 	: "=&r" (oldval)
 	: "r" (addr), "r" (nr)
 	: "r10", "r11", "r12", "p0", "p1", "memory"
@@ -62,7 +62,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
 	"1:	R12 = memw_locked(R10);\n"
 	"	{ P0 = tstbit(R12,R11); R12 = setbit(R12,R11); }\n"
 	"	memw_locked(R10,P1) = R12;\n"
-	"	{if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+	"	{if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
 	: "=&r" (oldval)
 	: "r" (addr), "r" (nr)
 	: "r10", "r11", "r12", "p0", "p1", "memory"
@@ -88,7 +88,7 @@ static inline int test_and_change_bit(int nr, volatile void *addr)
 	"1:	R12 = memw_locked(R10);\n"
 	"	{ P0 = tstbit(R12,R11); R12 = togglebit(R12,R11); }\n"
 	"	memw_locked(R10,P1) = R12;\n"
-	"	{if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+	"	{if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
 	: "=&r" (oldval)
 	: "r" (addr), "r" (nr)
 	: "r10", "r11", "r12", "p0", "p1", "memory"
@@ -223,7 +223,7 @@ static inline int ffs(int x)
 	int r;
 
 	asm("{ P0 = cmp.eq(%1,#0); %0 = ct0(%1);}\n"
-		"{ if P0 %0 = #0; if !P0 %0 = add(%0,#1);}\n"
+		"{ if (P0) %0 = #0; if (!P0) %0 = add(%0,#1);}\n"
 		: "=&r" (r)
 		: "r" (x)
 		: "p0");
diff --git a/arch/hexagon/include/asm/cmpxchg.h b/arch/hexagon/include/asm/cmpxchg.h
index 6091322c3af9..92b8a02e588a 100644
--- a/arch/hexagon/include/asm/cmpxchg.h
+++ b/arch/hexagon/include/asm/cmpxchg.h
@@ -30,7 +30,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
 	__asm__ __volatile__ (
 	"1:	%0 = memw_locked(%1);\n"    /*  load into retval */
 	"	memw_locked(%1,P0) = %2;\n" /*  store into memory */
-	"	if !P0 jump 1b;\n"
+	"	if (!P0) jump 1b;\n"
 	: "=&r" (retval)
 	: "r" (ptr), "r" (x)
 	: "memory", "p0"
diff --git a/arch/hexagon/include/asm/futex.h b/arch/hexagon/include/asm/futex.h
index cb635216a732..0191f7c7193e 100644
--- a/arch/hexagon/include/asm/futex.h
+++ b/arch/hexagon/include/asm/futex.h
@@ -16,7 +16,7 @@
 	    /* For example: %1 = %4 */ \
 	    insn \
 	"2: memw_locked(%3,p2) = %1;\n" \
-	"   if !p2 jump 1b;\n" \
+	"   if (!p2) jump 1b;\n" \
 	"   %1 = #0;\n" \
 	"3:\n" \
 	".section .fixup,\"ax\"\n" \
@@ -84,10 +84,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
 	"1: %1 = memw_locked(%3)\n"
 	"   {\n"
 	"      p2 = cmp.eq(%1,%4)\n"
-	"      if !p2.new jump:NT 3f\n"
+	"      if (!p2.new) jump:NT 3f\n"
 	"   }\n"
 	"2: memw_locked(%3,p2) = %5\n"
-	"   if !p2 jump 1b\n"
+	"   if (!p2) jump 1b\n"
 	"3:\n"
 	".section .fixup,\"ax\"\n"
 	"4: %0 = #%6\n"
diff --git a/arch/hexagon/include/asm/spinlock.h b/arch/hexagon/include/asm/spinlock.h
index bfe07d842ff3..ef103b73bec8 100644
--- a/arch/hexagon/include/asm/spinlock.h
+++ b/arch/hexagon/include/asm/spinlock.h
@@ -30,9 +30,9 @@ static inline void arch_read_lock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"1:	R6 = memw_locked(%0);\n"
 		"	{ P3 = cmp.ge(R6,#0); R6 = add(R6,#1);}\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		"	memw_locked(%0,P3) = R6;\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -46,7 +46,7 @@ static inline void arch_read_unlock(arch_rwlock_t *lock)
 		"1:	R6 = memw_locked(%0);\n"
 		"	R6 = add(R6,#-1);\n"
 		"	memw_locked(%0,P3) = R6\n"
-		"	if !P3 jump 1b;\n"
+		"	if (!P3) jump 1b;\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -61,7 +61,7 @@ static inline int arch_read_trylock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"	R6 = memw_locked(%1);\n"
 		"	{ %0 = #0; P3 = cmp.ge(R6,#0); R6 = add(R6,#1);}\n"
-		"	{ if !P3 jump 1f; }\n"
+		"	{ if (!P3) jump 1f; }\n"
 		"	memw_locked(%1,P3) = R6;\n"
 		"	{ %0 = P3 }\n"
 		"1:\n"
@@ -78,9 +78,9 @@ static inline void arch_write_lock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"1:	R6 = memw_locked(%0)\n"
 		"	{ P3 = cmp.eq(R6,#0);  R6 = #-1;}\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		"	memw_locked(%0,P3) = R6;\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -94,7 +94,7 @@ static inline int arch_write_trylock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"	R6 = memw_locked(%1)\n"
 		"	{ %0 = #0; P3 = cmp.eq(R6,#0);  R6 = #-1;}\n"
-		"	{ if !P3 jump 1f; }\n"
+		"	{ if (!P3) jump 1f; }\n"
 		"	memw_locked(%1,P3) = R6;\n"
 		"	%0 = P3;\n"
 		"1:\n"
@@ -117,9 +117,9 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	__asm__ __volatile__(
 		"1:	R6 = memw_locked(%0);\n"
 		"	P3 = cmp.eq(R6,#0);\n"
-		"	{ if !P3 jump 1b; R6 = #1; }\n"
+		"	{ if (!P3) jump 1b; R6 = #1; }\n"
 		"	memw_locked(%0,P3) = R6;\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -139,7 +139,7 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
 	__asm__ __volatile__(
 		"	R6 = memw_locked(%1);\n"
 		"	P3 = cmp.eq(R6,#0);\n"
-		"	{ if !P3 jump 1f; R6 = #1; %0 = #0; }\n"
+		"	{ if (!P3) jump 1f; R6 = #1; %0 = #0; }\n"
 		"	memw_locked(%1,P3) = R6;\n"
 		"	%0 = P3;\n"
 		"1:\n"
diff --git a/arch/hexagon/kernel/vm_entry.S b/arch/hexagon/kernel/vm_entry.S
index 12242c27e2df..4023fdbea490 100644
--- a/arch/hexagon/kernel/vm_entry.S
+++ b/arch/hexagon/kernel/vm_entry.S
@@ -369,7 +369,7 @@ ret_from_fork:
 		R26.L = #LO(do_work_pending);
 		R0 = #VM_INT_DISABLE;
 	}
-	if P0 jump check_work_pending
+	if (P0) jump check_work_pending
 	{
 		R0 = R25;
 		callr R24
-- 
2.20.1

[PATCH 5.4 202/203] hexagon: work around compiler crash

[Greg Kroah-Hartman]

From: Nick Desaulniers <ndesaulniers@google.com>

[ Upstream commit 63e80314ab7cf4783526d2e44ee57a90514911c9 ]

Clang cannot translate the string "r30" into a valid register yet.

Link: https://github.com/ClangBuiltLinux/linux/issues/755
Link: http://lkml.kernel.org/r/20191028155722.23419-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Sid Manning <sidneym@quicinc.com>
Reviewed-by: Brian Cain <bcain@codeaurora.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/hexagon/kernel/stacktrace.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/hexagon/kernel/stacktrace.c b/arch/hexagon/kernel/stacktrace.c
index 35f29423fda8..5ed02f699479 100644
--- a/arch/hexagon/kernel/stacktrace.c
+++ b/arch/hexagon/kernel/stacktrace.c
@@ -11,8 +11,6 @@
 #include <linux/thread_info.h>
 #include <linux/module.h>
 
-register unsigned long current_frame_pointer asm("r30");
-
 struct stackframe {
 	unsigned long fp;
 	unsigned long rets;
@@ -30,7 +28,7 @@ void save_stack_trace(struct stack_trace *trace)
 
 	low = (unsigned long)task_stack_page(current);
 	high = low + THREAD_SIZE;
-	fp = current_frame_pointer;
+	fp = (unsigned long)__builtin_frame_address(0);
 
 	while (fp >= low && fp <= (high - sizeof(*frame))) {
 		frame = (struct stackframe *)fp;
-- 
2.20.1

[PATCH 5.4 203/203] ocfs2: call journal flush to mark journal as empty after journal recovery when mount

[Greg Kroah-Hartman]

From: Kai Li <li.kai4@h3c.com>

[ Upstream commit 397eac17f86f404f5ba31d8c3e39ec3124b39fd3 ]

If journal is dirty when mount, it will be replayed but jbd2 sb log tail
cannot be updated to mark a new start because journal->j_flag has
already been set with JBD2_ABORT first in journal_init_common.

When a new transaction is committed, it will be recored in block 1
first(journal->j_tail is set to 1 in journal_reset).  If emergency
restart happens again before journal super block is updated
unfortunately, the new recorded trans will not be replayed in the next
mount.

The following steps describe this procedure in detail.
1. mount and touch some files
2. these transactions are committed to journal area but not checkpointed
3. emergency restart
4. mount again and its journals are replayed
5. journal super block's first s_start is 1, but its s_seq is not updated
6. touch a new file and its trans is committed but not checkpointed
7. emergency restart again
8. mount and journal is dirty, but trans committed in 6 will not be
replayed.

This exception happens easily when this lun is used by only one node.
If it is used by multi-nodes, other node will replay its journal and its
journal super block will be updated after recovery like what this patch
does.

ocfs2_recover_node->ocfs2_replay_journal.

The following jbd2 journal can be generated by touching a new file after
journal is replayed, and seq 15 is the first valid commit, but first seq
is 13 in journal super block.

logdump:
  Block 0: Journal Superblock
  Seq: 0   Type: 4 (JBD2_SUPERBLOCK_V2)
  Blocksize: 4096   Total Blocks: 32768   First Block: 1
  First Commit ID: 13   Start Log Blknum: 1
  Error: 0
  Feature Compat: 0
  Feature Incompat: 2 block64
  Feature RO compat: 0
  Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36
  FS Share Cnt: 1   Dynamic Superblk Blknum: 0
  Per Txn Block Limit    Journal: 0    Data: 0

  Block 1: Journal Commit Block
  Seq: 14   Type: 2 (JBD2_COMMIT_BLOCK)

  Block 2: Journal Descriptor
  Seq: 15   Type: 1 (JBD2_DESCRIPTOR_BLOCK)
  No. Blocknum        Flags
   0. 587             none
  UUID: 00000000000000000000000000000000
   1. 8257792         JBD2_FLAG_SAME_UUID
   2. 619             JBD2_FLAG_SAME_UUID
   3. 24772864        JBD2_FLAG_SAME_UUID
   4. 8257802         JBD2_FLAG_SAME_UUID
   5. 513             JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG
  ...
  Block 7: Inode
  Inode: 8257802   Mode: 0640   Generation: 57157641 (0x3682809)
  FS Generation: 2839773110 (0xa9437fb6)
  CRC32: 00000000   ECC: 0000
  Type: Regular   Attr: 0x0   Flags: Valid
  Dynamic Features: (0x1) InlineData
  User: 0 (root)   Group: 0 (root)   Size: 7
  Links: 1   Clusters: 0
  ctime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
  atime: 0x5de5d870 0x113181a1 -- Tue Dec  3 11:37:20.288457121 2019
  mtime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
  dtime: 0x0 -- Thu Jan  1 08:00:00 1970
  ...
  Block 9: Journal Commit Block
  Seq: 15   Type: 2 (JBD2_COMMIT_BLOCK)

The following is journal recovery log when recovering the upper jbd2
journal when mount again.

syslog:
  ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it.
  fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0
  fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1
  fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2
  fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13

Due to first commit seq 13 recorded in journal super is not consistent
with the value recorded in block 1(seq is 14), journal recovery will be
terminated before seq 15 even though it is an unbroken commit, inode
8257802 is a new file and it will be lost.

Link: http://lkml.kernel.org/r/20191217020140.2197-1-li.kai4@h3c.com
Signed-off-by: Kai Li <li.kai4@h3c.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Changwei Ge <gechangwei@live.cn>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/journal.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 699a560efbb0..900e4ef686bf 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1066,6 +1066,14 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int local, int replayed)
 
 	ocfs2_clear_journal_error(osb->sb, journal->j_journal, osb->slot_num);
 
+	if (replayed) {
+		jbd2_journal_lock_updates(journal->j_journal);
+		status = jbd2_journal_flush(journal->j_journal);
+		jbd2_journal_unlock_updates(journal->j_journal);
+		if (status < 0)
+			mlog_errno(status);
+	}
+
 	status = ocfs2_journal_toggle_dirty(osb, 1, replayed);
 	if (status < 0) {
 		mlog_errno(status);
-- 
2.20.1

Re: [PATCH 5.4 000/203] 5.4.13-stable review

[Jon Hunter]

On 16/01/2020 23:15, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.13 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.13-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests are passing for Tegra ...

Test results for stable-v5.4:
    13 builds:	13 pass, 0 fail
    22 boots:	22 pass, 0 fail
    38 tests:	38 pass, 0 fail

Linux version:	5.4.13-rc1-g3c8b6cdc962e
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 5.4 000/203] 5.4.13-stable review

[Naresh Kamboju]

On Fri, 17 Jan 2020 at 04:49, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.13 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.13-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.4.13-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: 3c8b6cdc962e6e3a21ee5786133fdab225fa26b9
git describe: v5.4.12-204-g3c8b6cdc962e
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.12-204-g3c8b6cdc962e

No regressions (compared to build v5.4.12)

No fixes (compared to build v5.4.12)

Ran 23712 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* kselftest
* ltp-hugetlb-tests
* ltp-mm-tests
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 000/203] 5.4.13-stable review

[Greg Kroah-Hartman]

On Fri, Jan 17, 2020 at 01:21:02PM +0000, Jon Hunter wrote:
> 
> On 16/01/2020 23:15, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.13 release.
> > There are 203 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.13-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> 
> All tests are passing for Tegra ...
> 
> Test results for stable-v5.4:
>     13 builds:	13 pass, 0 fail
>     22 boots:	22 pass, 0 fail
>     38 tests:	38 pass, 0 fail
> 
> Linux version:	5.4.13-rc1-g3c8b6cdc962e
> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>                 tegra194-p2972-0000, tegra20-ventana,
>                 tegra210-p2371-2180, tegra30-cardhu-a04
> 

Wonderful, thanks for testing these and letting me know.

greg k-h

Re: [PATCH 5.4 000/203] 5.4.13-stable review

[Greg Kroah-Hartman]

On Fri, Jan 17, 2020 at 07:50:10PM +0530, Naresh Kamboju wrote:
> On Fri, 17 Jan 2020 at 04:49, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.4.13 release.
> > There are 203 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.13-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 5.4 000/203] 5.4.13-stable review

[Guenter Roeck]

On Fri, Jan 17, 2020 at 12:15:17AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.13 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 158 pass: 158 fail: 0
Qemu test results:
	total: 389 pass: 389 fail: 0

Guenter

Re: [PATCH 5.4 000/203] 5.4.13-stable review

[shuah]

On 1/16/20 4:15 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.13 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.13-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 5.4 000/203] 5.4.13-stable review

[Greg Kroah-Hartman]

On Fri, Jan 17, 2020 at 09:05:13AM -0700, shuah wrote:
> On 1/16/20 4:15 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.13 release.
> > There are 203 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.13-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 5.4 000/203] 5.4.13-stable review

[Greg Kroah-Hartman]

On Fri, Jan 17, 2020 at 08:01:47AM -0800, Guenter Roeck wrote:
> On Fri, Jan 17, 2020 at 12:15:17AM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.13 release.
> > There are 203 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 158 pass: 158 fail: 0
> Qemu test results:
> 	total: 389 pass: 389 fail: 0

Great, thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 5.4 000/203] 5.4.13-stable review

[Jeffrin Jose]

On Fri, Jan 17, 2020 at 12:15:17AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.13 release.
> There are 203 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 18 Jan 2020 23:16:00 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.13-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 

hello,

compiled and booted 5.4.13-rc1+ . No regressions according to "sudo dmesg -l err"

--
software engineer
rajagiri school of engineering and technology

Re: [PATCH 5.4 117/203] rsi: fix potential null dereference in rsi_probe()

[Johan Hovold]

On Fri, Jan 17, 2020 at 12:17:14AM +0100, Greg Kroah-Hartman wrote:
> From: Denis Efremov <efremov@linux.com>
> 
> commit f170d44bc4ec2feae5f6206980e7ae7fbf0432a0 upstream.
> 
> The id pointer can be NULL in rsi_probe(). It is checked everywhere except
> for the else branch in the idProduct condition. The patch adds NULL check
> before the id dereference in the rsi_dbg() call.
> 
> Fixes: 54fdb318c111 ("rsi: add new device model for 9116")
> Cc: Amitkumar Karwar <amitkarwar@gmail.com>
> Cc: Siva Rebbagondla <siva8118@gmail.com>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Signed-off-by: Denis Efremov <efremov@linux.com>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit is bogus and was reverted shortly after it was applied in
order to prevent autosel from picking it up for stable (reverted by
c5dcf8f0e850 ("Revert "rsi: fix potential null dereference in
rsi_probe()"")).

The revert has now been picked up by Sasha, but shouldn't an
explicit revert in the same pull-request prevent a bad patch from being
backported in the first place? Seems like something that could be
scripted. But perhaps the net-stable oddities come into play here.

> ---
>  drivers/net/wireless/rsi/rsi_91x_usb.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> --- a/drivers/net/wireless/rsi/rsi_91x_usb.c
> +++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
> @@ -793,7 +793,7 @@ static int rsi_probe(struct usb_interfac
>  		adapter->device_model = RSI_DEV_9116;
>  	} else {
>  		rsi_dbg(ERR_ZONE, "%s: Unsupported RSI device id 0x%x\n",
> -			__func__, id->idProduct);
> +			__func__, id ? id->idProduct : 0x0);
>  		goto err1;
>  	}

Johan

Re: [PATCH 5.4 117/203] rsi: fix potential null dereference in rsi_probe()

[Greg Kroah-Hartman]

On Tue, Feb 04, 2020 at 09:33:32AM +0100, Johan Hovold wrote:
> On Fri, Jan 17, 2020 at 12:17:14AM +0100, Greg Kroah-Hartman wrote:
> > From: Denis Efremov <efremov@linux.com>
> > 
> > commit f170d44bc4ec2feae5f6206980e7ae7fbf0432a0 upstream.
> > 
> > The id pointer can be NULL in rsi_probe(). It is checked everywhere except
> > for the else branch in the idProduct condition. The patch adds NULL check
> > before the id dereference in the rsi_dbg() call.
> > 
> > Fixes: 54fdb318c111 ("rsi: add new device model for 9116")
> > Cc: Amitkumar Karwar <amitkarwar@gmail.com>
> > Cc: Siva Rebbagondla <siva8118@gmail.com>
> > Cc: Kalle Valo <kvalo@codeaurora.org>
> > Signed-off-by: Denis Efremov <efremov@linux.com>
> > Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> This commit is bogus and was reverted shortly after it was applied in
> order to prevent autosel from picking it up for stable (reverted by
> c5dcf8f0e850 ("Revert "rsi: fix potential null dereference in
> rsi_probe()"")).
> 
> The revert has now been picked up by Sasha, but shouldn't an
> explicit revert in the same pull-request prevent a bad patch from being
> backported in the first place? Seems like something that could be
> scripted. But perhaps the net-stable oddities come into play here.

This was my fault, I picked it up, and didn't run a "has this patch been
reverted" type search on them.  I'll add that to my workflow, sorry.

greg k-h

Re: [PATCH 5.4 140/203] MIPS: PCI: remember nasid changed by set interrupt affinity

[Sudip Mukherjee]

Hi Greg,

On Fri, Jan 17, 2020 at 12:17:37AM +0100, Greg Kroah-Hartman wrote:
> From: Thomas Bogendoerfer <tbogendoerfer@suse.de>
> 
> commit 37640adbefd66491cb8083a438f7bf366ac09bc7 upstream.
> 

<snip>

> 
> ---
>  arch/mips/pci/pci-xtalk-bridge.c |    5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> --- a/arch/mips/pci/pci-xtalk-bridge.c
> +++ b/arch/mips/pci/pci-xtalk-bridge.c
> @@ -279,16 +279,15 @@ static int bridge_set_affinity(struct ir
>  	struct bridge_irq_chip_data *data = d->chip_data;
>  	int bit = d->parent_data->hwirq;
>  	int pin = d->hwirq;
> -	nasid_t nasid;
>  	int ret, cpu;
>  
>  	ret = irq_chip_set_affinity_parent(d, mask, force);
>  	if (ret >= 0) {
>  		cpu = cpumask_first_and(mask, cpu_online_mask);
> -		nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
> +		data->nnasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));

This will be 'data->nasid' and its causing mips builds to fail.

-- 
Regards
Sudip