* [PATCH v3 1/9] dt-bindings: phy: add bindings for Hikey 960 PCIe PHY
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
@ 2021-07-09 10:41 ` Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 2/9] dt-bindings: phy: add bindings for Hikey 970 " Mauro Carvalho Chehab
` (9 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-09 10:41 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab,
Kishon Vijay Abraham I, Rob Herring, Vinod Koul, devicetree,
linux-kernel, linux-phy
Document the bindings for Hikey 960 (hi3660) PCIe PHY
interface, supported via the pcie-kirin driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../phy/hisilicon,phy-hi3660-pcie.yaml | 82 +++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3660-pcie.yaml
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3660-pcie.yaml b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3660-pcie.yaml
new file mode 100644
index 000000000000..bed290059abb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3660-pcie.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,phy-hi3660-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin960 PCIe PHY
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |+
+ Bindings for PCIe PHY on HiSilicon Kirin 960.
+
+properties:
+ compatible:
+ const: hisilicon,hi960-pcie-phy
+
+ "#phy-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+ description: PHY Control registers
+
+ reg-names:
+ const: phy
+
+ clocks:
+ items:
+ - description: PCIe PHY clock
+ - description: PCIe AUX clock
+ - description: PCIe APB PHY clock
+ - description: PCIe APB SYS clock
+ - description: PCIe ACLK clock
+
+ clock-names:
+ items:
+ - const: pcie_phy_ref
+ - const: pcie_aux
+ - const: pcie_apb_phy
+ - const: pcie_apb_sys
+ - const: pcie_aclk
+
+ reset-gpios:
+ description: PCI PERST reset GPIO
+
+required:
+ - "#phy-cells"
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/hi3660-clock.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pcie_phy: pcie-phy@f3f2000 {
+ compatible = "hisilicon,hi960-pcie-phy";
+ reg = <0x0 0xf3f20000 0x0 0x40000>;
+ reg-names = "phy";
+ clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys",
+ "pcie_aclk";
+ reset-gpios = <&gpio11 1 0 >;
+ #phy-cells = <0>;
+ };
+ };
+...
--
2.31.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v3 2/9] dt-bindings: phy: add bindings for Hikey 970 PCIe PHY
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 1/9] dt-bindings: phy: add bindings for Hikey 960 PCIe PHY Mauro Carvalho Chehab
@ 2021-07-09 10:41 ` Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 3/9] dt-bindings: PCI: kirin: fix compatible string Mauro Carvalho Chehab
` (8 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-09 10:41 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab,
Kishon Vijay Abraham I, Rob Herring, Vinod Koul, devicetree,
linux-kernel, linux-phy
Document the bindings for Hikey 960 (hi3660) PCIe PHY
interface, supported via the pcie-kirin driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../phy/hisilicon,phy-hi3670-pcie.yaml | 101 ++++++++++++++++++
1 file changed, 101 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
new file mode 100644
index 000000000000..eddf2f2b6382
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,phy-hi3670-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon Kirin970 PCIe PHY
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |+
+ Bindings for PCIe PHY on HiSilicon Kirin 970.
+
+properties:
+ compatible:
+ const: hisilicon,hi970-pcie-phy
+
+ "#phy-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+ description: PHY Control registers
+
+ reg-names:
+ const: phy
+
+ phy-supply:
+ description: The PCIe PHY power supply
+
+ clocks:
+ items:
+ - description: PCIe PHY clock
+ - description: PCIe AUX clock
+ - description: PCIe APB PHY clock
+ - description: PCIe APB SYS clock
+ - description: PCIe ACLK clock
+
+ clock-names:
+ items:
+ - const: pcie_phy_ref
+ - const: pcie_aux
+ - const: pcie_apb_phy
+ - const: pcie_apb_sys
+ - const: pcie_aclk
+
+ reset-gpios:
+ description: PCI PERST reset GPIOs
+ maxItems: 4
+
+ clkreq-gpios:
+ description: Clock request GPIOs
+ maxItems: 3
+
+ hisilicon,eye-diagram-param:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: Eye diagram for phy.
+
+required:
+ - "#phy-cells"
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - reset-gpios
+ - clkreq-gpios
+ - hisilicon,eye-diagram-param
+ - phy-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/hi3670-clock.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pcie_phy: pcie-phy@fc000000 {
+ compatible = "hisilicon,hi970-pcie-phy";
+ reg = <0x0 0xfc000000 0x0 0x80000>;
+ reg-names = "phy";
+ #phy-cells = <0>;
+ phy-supply = <&ldo33>;
+ clocks = <&crg_ctrl HI3670_CLK_GATE_PCIEPHY_REF>,
+ <&crg_ctrl HI3670_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3670_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3670_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3670_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
+ reset-gpios = <&gpio7 0 0 >, <&gpio25 2 0 >,
+ <&gpio3 1 0 >, <&gpio27 4 0 >;
+ clkreq-gpios = <&gpio20 6 0 >, <&gpio27 3 0 >, <&gpio17 0 0 >;
+ hisilicon,eye-diagram-param = <0xFFFFFFFF 0xFFFFFFFF
+ 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF>;
+ };
+ };
+...
--
2.31.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v3 3/9] dt-bindings: PCI: kirin: fix compatible string
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 1/9] dt-bindings: phy: add bindings for Hikey 960 PCIe PHY Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 2/9] dt-bindings: phy: add bindings for Hikey 970 " Mauro Carvalho Chehab
@ 2021-07-09 10:41 ` Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 4/9] dt-bindings: PCI: kirin: drop PHY properties Mauro Carvalho Chehab
` (7 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-09 10:41 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Binghui Wang,
Bjorn Helgaas, Rob Herring, Xiaowei Song, devicetree,
linux-kernel, linux-pci
The pcie-kirin driver doesn't declare a hisilicon,kirin-pcie.
Also, remove the useless comment after the description, as other
compat will be supported by the same driver in the future.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/devicetree/bindings/pci/kirin-pcie.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
index 6bbe43818ad5..71cac2b74002 100644
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -9,7 +9,7 @@ Additional properties are described here:
Required properties
- compatible:
- "hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC
+ "hisilicon,kirin960-pcie"
- reg: Should contain rc_dbi, apb, phy, config registers location and length.
- reg-names: Must include the following entries:
"dbi": controller configuration registers;
@@ -23,7 +23,7 @@ Optional properties:
Example based on kirin960:
pcie@f4000000 {
- compatible = "hisilicon,kirin-pcie";
+ compatible = "hisilicon,kirin960-pcie";
reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
<0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>;
reg-names = "dbi","apb","phy", "config";
--
2.31.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v3 4/9] dt-bindings: PCI: kirin: drop PHY properties
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
` (2 preceding siblings ...)
2021-07-09 10:41 ` [PATCH v3 3/9] dt-bindings: PCI: kirin: fix compatible string Mauro Carvalho Chehab
@ 2021-07-09 10:41 ` Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 5/9] phy: hisilicon: add a PHY driver for Kirin 960 Mauro Carvalho Chehab
` (6 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-09 10:41 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Binghui Wang,
Bjorn Helgaas, Rob Herring, Xiaowei Song, devicetree,
linux-kernel, linux-pci
There are several properties there that belong to the PHY
interface. Drop them, as a new binding file will describe
the PHY properties for Kirin 960.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../devicetree/bindings/pci/kirin-pcie.txt | 16 +++-------------
1 file changed, 3 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
index 71cac2b74002..a93a8cfa1afb 100644
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -10,13 +10,11 @@ Additional properties are described here:
Required properties
- compatible:
"hisilicon,kirin960-pcie"
-- reg: Should contain rc_dbi, apb, phy, config registers location and length.
+- reg: Should contain rc_dbi, apb, config registers location and length.
- reg-names: Must include the following entries:
"dbi": controller configuration registers;
"apb": apb Ctrl register defined by Kirin;
- "phy": apb PHY register defined by Kirin;
"config": PCIe configuration space registers.
-- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
Optional properties:
@@ -25,8 +23,8 @@ Example based on kirin960:
pcie@f4000000 {
compatible = "hisilicon,kirin960-pcie";
reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
- <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>;
- reg-names = "dbi","apb","phy", "config";
+ <0x0 0xF4000000 0 0x2000>;
+ reg-names = "dbi","apb", "config";
bus-range = <0x0 0x1>;
#address-cells = <3>;
#size-cells = <2>;
@@ -39,12 +37,4 @@ Example based on kirin960:
<0x0 0 0 2 &gic 0 0 0 283 4>,
<0x0 0 0 3 &gic 0 0 0 284 4>,
<0x0 0 0 4 &gic 0 0 0 285 4>;
- clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
- <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
- <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
- <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
- <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
- clock-names = "pcie_phy_ref", "pcie_aux",
- "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
- reset-gpios = <&gpio11 1 0 >;
};
--
2.31.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v3 5/9] phy: hisilicon: add a PHY driver for Kirin 960
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
` (3 preceding siblings ...)
2021-07-09 10:41 ` [PATCH v3 4/9] dt-bindings: PCI: kirin: drop PHY properties Mauro Carvalho Chehab
@ 2021-07-09 10:41 ` Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 6/9] PCI: kirin: drop the PHY logic from the driver Mauro Carvalho Chehab
` (5 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-09 10:41 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab,
Kishon Vijay Abraham I, Vinod Koul, linux-kernel, linux-phy
The pcie-kirin PCIe driver contains internally a PHY interface for
a Kirin 960. As we'll be adding support also for Kirin 970 PHY, we
need to first split the PHY into a separate driver.
So, add a new driver with just the PHY part of
drivers/pci/controller/dwc/pcie-kirin.c.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/phy/hisilicon/Kconfig | 10 +
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hi3660-pcie.c | 325 ++++++++++++++++++++++++
3 files changed, 336 insertions(+)
create mode 100644 drivers/phy/hisilicon/phy-hi3660-pcie.c
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
index 4d008cfc279c..c0725907e2cb 100644
--- a/drivers/phy/hisilicon/Kconfig
+++ b/drivers/phy/hisilicon/Kconfig
@@ -23,6 +23,16 @@ config PHY_HI3660_USB
To compile this driver as a module, choose M here.
+config PHY_HI3660_PCIE
+ tristate "hi3660 PCIe PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI3660 PCIe PHY.
+
+ To compile this driver as a module, choose M here.
+
config PHY_HI3670_USB
tristate "hi3670 USB PHY support"
depends on (ARCH_HISI && ARM64) || COMPILE_TEST
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
index 51729868145b..3c3d70dd7469 100644
--- a/drivers/phy/hisilicon/Makefile
+++ b/drivers/phy/hisilicon/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o
+obj-$(CONFIG_PHY_HI3660_PCIE) += phy-hi3660-pcie.o
obj-$(CONFIG_PHY_HI3670_USB) += phy-hi3670-usb3.o
obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o
obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o
diff --git a/drivers/phy/hisilicon/phy-hi3660-pcie.c b/drivers/phy/hisilicon/phy-hi3660-pcie.c
new file mode 100644
index 000000000000..130314b0e8cb
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3660-pcie.c
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe phy driver for Kirin 960
+ *
+ * Copyright (C) 2017 HiSilicon Electronics Co., Ltd.
+ * https://www.huawei.com
+ *
+ * Copyright (C) 2021 Huawei Electronics Co., Ltd.
+ * https://www.huawei.com
+ *
+ * Author:
+ * Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define REF_CLK_FREQ 100000000
+
+/* info located in APB PHY */
+#define PCIE_APB_PHY_CTRL0 0x0
+#define PCIE_APB_PHY_CTRL1 0x4
+#define PCIE_APB_PHY_STATUS0 0x400
+#define PIPE_CLK_STABLE BIT(19)
+#define PHY_REF_PAD_BIT BIT(8)
+#define PHY_PWR_DOWN_BIT BIT(22)
+#define PHY_RST_ACK_BIT BIT(16)
+
+/* info located in sysctrl */
+#define SCTRL_PCIE_CMOS_OFFSET 0x60
+#define SCTRL_PCIE_CMOS_BIT 0x10
+#define SCTRL_PCIE_ISO_OFFSET 0x44
+#define SCTRL_PCIE_ISO_BIT 0x30
+#define SCTRL_PCIE_HPCLK_OFFSET 0x190
+#define SCTRL_PCIE_HPCLK_BIT 0x184000
+#define SCTRL_PCIE_OE_OFFSET 0x14a
+#define PCIE_DEBOUNCE_PARAM 0xF0F400
+#define PCIE_OE_BYPASS (0x3 << 28)
+
+/* peri_crg ctrl */
+#define CRGCTRL_PCIE_ASSERT_OFFSET 0x88
+#define CRGCTRL_PCIE_ASSERT_BIT 0x8c000000
+
+/* Time for delay */
+#define REF_2_PERST_MIN 20000
+#define REF_2_PERST_MAX 25000
+#define PERST_2_ACCESS_MIN 10000
+#define PERST_2_ACCESS_MAX 12000
+#define PIPE_CLK_WAIT_MIN 550
+#define PIPE_CLK_WAIT_MAX 600
+#define TIME_CMOS_MIN 100
+#define TIME_CMOS_MAX 105
+#define TIME_PHY_PD_MIN 10
+#define TIME_PHY_PD_MAX 11
+
+struct hi3660_pcie_phy {
+ struct device *dev;
+ void __iomem *base;
+ struct regmap *crgctrl;
+ struct regmap *sysctrl;
+ struct clk *apb_sys_clk;
+ struct clk *apb_phy_clk;
+ struct clk *phy_ref_clk;
+ struct clk *pcie_aclk;
+ struct clk *pcie_aux_clk;
+ int gpio_id_reset;
+};
+
+/* Registers in PCIePHY */
+static inline void kirin_apb_phy_writel(struct hi3660_pcie_phy *hi3660_pcie_phy,
+ u32 val, u32 reg)
+{
+ writel(val, hi3660_pcie_phy->base + reg);
+}
+
+static inline u32 kirin_apb_phy_readl(struct hi3660_pcie_phy *hi3660_pcie_phy,
+ u32 reg)
+{
+ return readl(hi3660_pcie_phy->base + reg);
+}
+
+static void hi3660_pcie_phy_oe_enable(struct hi3660_pcie_phy *phy)
+{
+ u32 val;
+
+ regmap_read(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, &val);
+ val |= PCIE_DEBOUNCE_PARAM;
+ val &= ~PCIE_OE_BYPASS;
+ regmap_write(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, val);
+}
+
+
+static int kirin_pcie_clk_ctrl(struct hi3660_pcie_phy *phy, bool enable)
+{
+ int ret = 0;
+
+ if (!enable)
+ goto close_clk;
+
+ ret = clk_set_rate(phy->phy_ref_clk, REF_CLK_FREQ);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy->phy_ref_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy->apb_sys_clk);
+ if (ret)
+ goto apb_sys_fail;
+
+ ret = clk_prepare_enable(phy->apb_phy_clk);
+ if (ret)
+ goto apb_phy_fail;
+
+ ret = clk_prepare_enable(phy->pcie_aclk);
+ if (ret)
+ goto aclk_fail;
+
+ ret = clk_prepare_enable(phy->pcie_aux_clk);
+ if (ret)
+ goto aux_clk_fail;
+
+ return 0;
+
+close_clk:
+ clk_disable_unprepare(phy->pcie_aux_clk);
+aux_clk_fail:
+ clk_disable_unprepare(phy->pcie_aclk);
+aclk_fail:
+ clk_disable_unprepare(phy->apb_phy_clk);
+apb_phy_fail:
+ clk_disable_unprepare(phy->apb_sys_clk);
+apb_sys_fail:
+ clk_disable_unprepare(phy->phy_ref_clk);
+
+ return ret;
+}
+
+static int hi3660_pcie_phy_power_on(struct phy *generic_phy)
+{
+ struct hi3660_pcie_phy *phy = phy_get_drvdata(generic_phy);
+ struct device *dev = phy->dev;
+ u32 reg_val;
+ int ret;
+
+ /* Power supply for Host */
+ regmap_write(phy->sysctrl,
+ SCTRL_PCIE_CMOS_OFFSET, SCTRL_PCIE_CMOS_BIT);
+ usleep_range(TIME_CMOS_MIN, TIME_CMOS_MAX);
+
+ hi3660_pcie_phy_oe_enable(phy);
+
+ ret = kirin_pcie_clk_ctrl(phy, true);
+ if (ret)
+ return ret;
+
+ /* ISO disable, PCIeCtrl, PHY assert and clk gate clear */
+ regmap_write(phy->sysctrl,
+ SCTRL_PCIE_ISO_OFFSET, SCTRL_PCIE_ISO_BIT);
+ regmap_write(phy->crgctrl,
+ CRGCTRL_PCIE_ASSERT_OFFSET, CRGCTRL_PCIE_ASSERT_BIT);
+ regmap_write(phy->sysctrl,
+ SCTRL_PCIE_HPCLK_OFFSET, SCTRL_PCIE_HPCLK_BIT);
+
+ reg_val = kirin_apb_phy_readl(phy, PCIE_APB_PHY_CTRL1);
+ reg_val &= ~PHY_REF_PAD_BIT;
+ kirin_apb_phy_writel(phy, reg_val, PCIE_APB_PHY_CTRL1);
+
+ reg_val = kirin_apb_phy_readl(phy, PCIE_APB_PHY_CTRL0);
+ reg_val &= ~PHY_PWR_DOWN_BIT;
+ kirin_apb_phy_writel(phy, reg_val, PCIE_APB_PHY_CTRL0);
+ usleep_range(TIME_PHY_PD_MIN, TIME_PHY_PD_MAX);
+
+ reg_val = kirin_apb_phy_readl(phy, PCIE_APB_PHY_CTRL1);
+ reg_val &= ~PHY_RST_ACK_BIT;
+ kirin_apb_phy_writel(phy, reg_val, PCIE_APB_PHY_CTRL1);
+
+ usleep_range(PIPE_CLK_WAIT_MIN, PIPE_CLK_WAIT_MAX);
+ reg_val = kirin_apb_phy_readl(phy, PCIE_APB_PHY_STATUS0);
+ if (reg_val & PIPE_CLK_STABLE) {
+ dev_err(dev, "PIPE clk is not stable\n");
+ ret = -EINVAL;
+ goto disable_clks;
+ }
+
+ /* perst assert Endpoint */
+ if (!gpio_request(phy->gpio_id_reset, "pcie_perst")) {
+ usleep_range(REF_2_PERST_MIN, REF_2_PERST_MAX);
+ ret = gpio_direction_output(phy->gpio_id_reset, 1);
+ if (ret)
+ goto disable_clks;
+ usleep_range(PERST_2_ACCESS_MIN, PERST_2_ACCESS_MAX);
+ return 0;
+ }
+
+disable_clks:
+ kirin_pcie_clk_ctrl(phy, false);
+ return ret;
+}
+
+static int hi3660_pcie_phy_power_off(struct phy *generic_phy)
+{
+ struct hi3660_pcie_phy *phy = phy_get_drvdata(generic_phy);
+
+ /* Drop power supply for Host */
+ regmap_write(phy->sysctrl, SCTRL_PCIE_CMOS_OFFSET, 0x00);
+
+ kirin_pcie_clk_ctrl(phy, false);
+
+ return 0;
+}
+
+static const struct phy_ops hi3660_phy_ops = {
+ .power_on = hi3660_pcie_phy_power_on,
+ .power_off = hi3660_pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int kirin_pcie_get_resources(struct hi3660_pcie_phy *phy,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ /* syscon */
+ phy->crgctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3660-crgctrl");
+ if (IS_ERR(phy->crgctrl))
+ return PTR_ERR(phy->crgctrl);
+
+ phy->sysctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3660-sctrl");
+ if (IS_ERR(phy->sysctrl))
+ return PTR_ERR(phy->sysctrl);
+
+ /* clocks */
+ phy->phy_ref_clk = devm_clk_get(dev, "pcie_phy_ref");
+ if (IS_ERR(phy->phy_ref_clk))
+ return PTR_ERR(phy->phy_ref_clk);
+
+ phy->pcie_aux_clk = devm_clk_get(dev, "pcie_aux");
+ if (IS_ERR(phy->pcie_aux_clk))
+ return PTR_ERR(phy->pcie_aux_clk);
+
+ phy->apb_phy_clk = devm_clk_get(dev, "pcie_apb_phy");
+ if (IS_ERR(phy->apb_phy_clk))
+ return PTR_ERR(phy->apb_phy_clk);
+
+ phy->apb_sys_clk = devm_clk_get(dev, "pcie_apb_sys");
+ if (IS_ERR(phy->apb_sys_clk))
+ return PTR_ERR(phy->apb_sys_clk);
+
+ phy->pcie_aclk = devm_clk_get(dev, "pcie_aclk");
+ if (IS_ERR(phy->pcie_aclk))
+ return PTR_ERR(phy->pcie_aclk);
+
+ /* registers */
+ phy->base = devm_platform_ioremap_resource_byname(pdev, "phy");
+ if (IS_ERR(phy->base))
+ return PTR_ERR(phy->base);
+
+ /* gpios */
+ phy->gpio_id_reset = of_get_named_gpio(dev->of_node,
+ "reset-gpios", 0);
+ if (phy->gpio_id_reset == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (!gpio_is_valid(phy->gpio_id_reset)) {
+ dev_err(dev, "unable to get a valid gpio pin\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int hi3660_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct hi3660_pcie_phy *phy;
+ struct phy *generic_phy;
+ int ret;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->dev = dev;
+
+ ret = kirin_pcie_get_resources(phy, pdev);
+ if (ret)
+ return ret;
+
+ generic_phy = devm_phy_create(dev, dev->of_node, &hi3660_phy_ops);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3660_pcie_phy_match[] = {
+ {
+ .compatible = "hisilicon,hi960-pcie-phy",
+ },
+ {},
+};
+
+static struct platform_driver hi3660_pcie_phy_driver = {
+ .probe = hi3660_pcie_phy_probe,
+ .driver = {
+ .of_match_table = hi3660_pcie_phy_match,
+ .name = "hi3660_pcie_phy",
+ .suppress_bind_attrs = true,
+ }
+};
+builtin_platform_driver(hi3660_pcie_phy_driver);
--
2.31.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v3 6/9] PCI: kirin: drop the PHY logic from the driver
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
` (4 preceding siblings ...)
2021-07-09 10:41 ` [PATCH v3 5/9] phy: hisilicon: add a PHY driver for Kirin 960 Mauro Carvalho Chehab
@ 2021-07-09 10:41 ` Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 7/9] PCI: kirin: use regmap for APB registers Mauro Carvalho Chehab
` (4 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-09 10:41 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab,
Krzysztof Wilczyński, Binghui Wang, Bjorn Helgaas,
Lorenzo Pieralisi, Rob Herring, Wei Xu, Xiaowei Song, devicetree,
linux-arm-kernel, linux-kernel, linux-pci
The pcie-kirin PCIe driver contains internally a PHY interface for
a Kirin 960. Drop it and add support for using the new PHY driver
for Kirin 960, updating DT accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 29 ++-
drivers/pci/controller/dwc/pcie-kirin.c | 252 +++-------------------
2 files changed, 47 insertions(+), 234 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 53890e8052a7..07a616b352f5 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1001,17 +1001,33 @@ spi3: spi@ff3b3000 {
status = "disabled";
};
+ pcie_phy: pcie-phy@f3f2000 {
+ compatible = "hisilicon,hi960-pcie-phy";
+ reg = <0x0 0xf3f20000 0x0 0x40000>;
+ reg-names = "phy";
+ clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys",
+ "pcie_aclk";
+ reset-gpios = <&gpio11 1 0 >;
+ #phy-cells = <0>;
+ };
+
pcie@f4000000 {
compatible = "hisilicon,kirin960-pcie";
reg = <0x0 0xf4000000 0x0 0x1000>,
<0x0 0xff3fe000 0x0 0x1000>,
- <0x0 0xf3f20000 0x0 0x40000>,
<0x0 0xf5000000 0x0 0x2000>;
- reg-names = "dbi", "apb", "phy", "config";
+ reg-names = "dbi", "apb", "config";
bus-range = <0x0 0x1>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
+ phys = <&pcie_phy>;
ranges = <0x02000000 0x0 0x00000000
0x0 0xf6000000
0x0 0x02000000>;
@@ -1028,15 +1044,6 @@ &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
&gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
<0x0 0 0 4
&gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
- <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
- <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
- <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
- <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
- clock-names = "pcie_phy_ref", "pcie_aux",
- "pcie_apb_phy", "pcie_apb_sys",
- "pcie_aclk";
- reset-gpios = <&gpio11 1 0 >;
};
/* UFS */
diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
index 026fd1e42a55..a77bbecbf11f 100644
--- a/drivers/pci/controller/dwc/pcie-kirin.c
+++ b/drivers/pci/controller/dwc/pcie-kirin.c
@@ -9,7 +9,6 @@
*/
#include <linux/compiler.h>
-#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
@@ -21,6 +20,7 @@
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/resource.h>
#include <linux/types.h>
@@ -28,26 +28,17 @@
#define to_kirin_pcie(x) dev_get_drvdata((x)->dev)
-#define REF_CLK_FREQ 100000000
-
/* PCIe ELBI registers */
#define SOC_PCIECTRL_CTRL0_ADDR 0x000
#define SOC_PCIECTRL_CTRL1_ADDR 0x004
-#define SOC_PCIEPHY_CTRL2_ADDR 0x008
-#define SOC_PCIEPHY_CTRL3_ADDR 0x00c
#define PCIE_ELBI_SLV_DBI_ENABLE (0x1 << 21)
/* info located in APB */
#define PCIE_APP_LTSSM_ENABLE 0x01c
-#define PCIE_APB_PHY_CTRL0 0x0
-#define PCIE_APB_PHY_CTRL1 0x4
#define PCIE_APB_PHY_STATUS0 0x400
#define PCIE_LINKUP_ENABLE (0x8020)
#define PCIE_LTSSM_ENABLE_BIT (0x1 << 11)
#define PIPE_CLK_STABLE (0x1 << 19)
-#define PHY_REF_PAD_BIT (0x1 << 8)
-#define PHY_PWR_DOWN_BIT (0x1 << 22)
-#define PHY_RST_ACK_BIT (0x1 << 16)
/* info located in sysctrl */
#define SCTRL_PCIE_CMOS_OFFSET 0x60
@@ -60,36 +51,10 @@
#define PCIE_DEBOUNCE_PARAM 0xF0F400
#define PCIE_OE_BYPASS (0x3 << 28)
-/* peri_crg ctrl */
-#define CRGCTRL_PCIE_ASSERT_OFFSET 0x88
-#define CRGCTRL_PCIE_ASSERT_BIT 0x8c000000
-
-/* Time for delay */
-#define REF_2_PERST_MIN 20000
-#define REF_2_PERST_MAX 25000
-#define PERST_2_ACCESS_MIN 10000
-#define PERST_2_ACCESS_MAX 12000
-#define LINK_WAIT_MIN 900
-#define LINK_WAIT_MAX 1000
-#define PIPE_CLK_WAIT_MIN 550
-#define PIPE_CLK_WAIT_MAX 600
-#define TIME_CMOS_MIN 100
-#define TIME_CMOS_MAX 105
-#define TIME_PHY_PD_MIN 10
-#define TIME_PHY_PD_MAX 11
-
struct kirin_pcie {
struct dw_pcie *pci;
+ struct phy *phy;
void __iomem *apb_base;
- void __iomem *phy_base;
- struct regmap *crgctrl;
- struct regmap *sysctrl;
- struct clk *apb_sys_clk;
- struct clk *apb_phy_clk;
- struct clk *phy_ref_clk;
- struct clk *pcie_aclk;
- struct clk *pcie_aux_clk;
- int gpio_id_reset;
};
/* Registers in PCIeCTRL */
@@ -104,46 +69,6 @@ static inline u32 kirin_apb_ctrl_readl(struct kirin_pcie *kirin_pcie, u32 reg)
return readl(kirin_pcie->apb_base + reg);
}
-/* Registers in PCIePHY */
-static inline void kirin_apb_phy_writel(struct kirin_pcie *kirin_pcie,
- u32 val, u32 reg)
-{
- writel(val, kirin_pcie->phy_base + reg);
-}
-
-static inline u32 kirin_apb_phy_readl(struct kirin_pcie *kirin_pcie, u32 reg)
-{
- return readl(kirin_pcie->phy_base + reg);
-}
-
-static long kirin_pcie_get_clk(struct kirin_pcie *kirin_pcie,
- struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
-
- kirin_pcie->phy_ref_clk = devm_clk_get(dev, "pcie_phy_ref");
- if (IS_ERR(kirin_pcie->phy_ref_clk))
- return PTR_ERR(kirin_pcie->phy_ref_clk);
-
- kirin_pcie->pcie_aux_clk = devm_clk_get(dev, "pcie_aux");
- if (IS_ERR(kirin_pcie->pcie_aux_clk))
- return PTR_ERR(kirin_pcie->pcie_aux_clk);
-
- kirin_pcie->apb_phy_clk = devm_clk_get(dev, "pcie_apb_phy");
- if (IS_ERR(kirin_pcie->apb_phy_clk))
- return PTR_ERR(kirin_pcie->apb_phy_clk);
-
- kirin_pcie->apb_sys_clk = devm_clk_get(dev, "pcie_apb_sys");
- if (IS_ERR(kirin_pcie->apb_sys_clk))
- return PTR_ERR(kirin_pcie->apb_sys_clk);
-
- kirin_pcie->pcie_aclk = devm_clk_get(dev, "pcie_aclk");
- if (IS_ERR(kirin_pcie->pcie_aclk))
- return PTR_ERR(kirin_pcie->pcie_aclk);
-
- return 0;
-}
-
static long kirin_pcie_get_resource(struct kirin_pcie *kirin_pcie,
struct platform_device *pdev)
{
@@ -152,149 +77,18 @@ static long kirin_pcie_get_resource(struct kirin_pcie *kirin_pcie,
if (IS_ERR(kirin_pcie->apb_base))
return PTR_ERR(kirin_pcie->apb_base);
- kirin_pcie->phy_base =
- devm_platform_ioremap_resource_byname(pdev, "phy");
- if (IS_ERR(kirin_pcie->phy_base))
- return PTR_ERR(kirin_pcie->phy_base);
-
- kirin_pcie->crgctrl =
- syscon_regmap_lookup_by_compatible("hisilicon,hi3660-crgctrl");
- if (IS_ERR(kirin_pcie->crgctrl))
- return PTR_ERR(kirin_pcie->crgctrl);
-
- kirin_pcie->sysctrl =
- syscon_regmap_lookup_by_compatible("hisilicon,hi3660-sctrl");
- if (IS_ERR(kirin_pcie->sysctrl))
- return PTR_ERR(kirin_pcie->sysctrl);
-
return 0;
}
-static int kirin_pcie_phy_init(struct kirin_pcie *kirin_pcie)
-{
- struct device *dev = kirin_pcie->pci->dev;
- u32 reg_val;
-
- reg_val = kirin_apb_phy_readl(kirin_pcie, PCIE_APB_PHY_CTRL1);
- reg_val &= ~PHY_REF_PAD_BIT;
- kirin_apb_phy_writel(kirin_pcie, reg_val, PCIE_APB_PHY_CTRL1);
-
- reg_val = kirin_apb_phy_readl(kirin_pcie, PCIE_APB_PHY_CTRL0);
- reg_val &= ~PHY_PWR_DOWN_BIT;
- kirin_apb_phy_writel(kirin_pcie, reg_val, PCIE_APB_PHY_CTRL0);
- usleep_range(TIME_PHY_PD_MIN, TIME_PHY_PD_MAX);
-
- reg_val = kirin_apb_phy_readl(kirin_pcie, PCIE_APB_PHY_CTRL1);
- reg_val &= ~PHY_RST_ACK_BIT;
- kirin_apb_phy_writel(kirin_pcie, reg_val, PCIE_APB_PHY_CTRL1);
-
- usleep_range(PIPE_CLK_WAIT_MIN, PIPE_CLK_WAIT_MAX);
- reg_val = kirin_apb_phy_readl(kirin_pcie, PCIE_APB_PHY_STATUS0);
- if (reg_val & PIPE_CLK_STABLE) {
- dev_err(dev, "PIPE clk is not stable\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void kirin_pcie_oe_enable(struct kirin_pcie *kirin_pcie)
-{
- u32 val;
-
- regmap_read(kirin_pcie->sysctrl, SCTRL_PCIE_OE_OFFSET, &val);
- val |= PCIE_DEBOUNCE_PARAM;
- val &= ~PCIE_OE_BYPASS;
- regmap_write(kirin_pcie->sysctrl, SCTRL_PCIE_OE_OFFSET, val);
-}
-
-static int kirin_pcie_clk_ctrl(struct kirin_pcie *kirin_pcie, bool enable)
-{
- int ret = 0;
-
- if (!enable)
- goto close_clk;
-
- ret = clk_set_rate(kirin_pcie->phy_ref_clk, REF_CLK_FREQ);
- if (ret)
- return ret;
-
- ret = clk_prepare_enable(kirin_pcie->phy_ref_clk);
- if (ret)
- return ret;
-
- ret = clk_prepare_enable(kirin_pcie->apb_sys_clk);
- if (ret)
- goto apb_sys_fail;
-
- ret = clk_prepare_enable(kirin_pcie->apb_phy_clk);
- if (ret)
- goto apb_phy_fail;
-
- ret = clk_prepare_enable(kirin_pcie->pcie_aclk);
- if (ret)
- goto aclk_fail;
-
- ret = clk_prepare_enable(kirin_pcie->pcie_aux_clk);
- if (ret)
- goto aux_clk_fail;
-
- return 0;
-
-close_clk:
- clk_disable_unprepare(kirin_pcie->pcie_aux_clk);
-aux_clk_fail:
- clk_disable_unprepare(kirin_pcie->pcie_aclk);
-aclk_fail:
- clk_disable_unprepare(kirin_pcie->apb_phy_clk);
-apb_phy_fail:
- clk_disable_unprepare(kirin_pcie->apb_sys_clk);
-apb_sys_fail:
- clk_disable_unprepare(kirin_pcie->phy_ref_clk);
-
- return ret;
-}
-
static int kirin_pcie_power_on(struct kirin_pcie *kirin_pcie)
{
int ret;
- /* Power supply for Host */
- regmap_write(kirin_pcie->sysctrl,
- SCTRL_PCIE_CMOS_OFFSET, SCTRL_PCIE_CMOS_BIT);
- usleep_range(TIME_CMOS_MIN, TIME_CMOS_MAX);
- kirin_pcie_oe_enable(kirin_pcie);
-
- ret = kirin_pcie_clk_ctrl(kirin_pcie, true);
+ ret = phy_init(kirin_pcie->phy);
if (ret)
return ret;
- /* ISO disable, PCIeCtrl, PHY assert and clk gate clear */
- regmap_write(kirin_pcie->sysctrl,
- SCTRL_PCIE_ISO_OFFSET, SCTRL_PCIE_ISO_BIT);
- regmap_write(kirin_pcie->crgctrl,
- CRGCTRL_PCIE_ASSERT_OFFSET, CRGCTRL_PCIE_ASSERT_BIT);
- regmap_write(kirin_pcie->sysctrl,
- SCTRL_PCIE_HPCLK_OFFSET, SCTRL_PCIE_HPCLK_BIT);
-
- ret = kirin_pcie_phy_init(kirin_pcie);
- if (ret)
- goto close_clk;
-
- /* perst assert Endpoint */
- if (!gpio_request(kirin_pcie->gpio_id_reset, "pcie_perst")) {
- usleep_range(REF_2_PERST_MIN, REF_2_PERST_MAX);
- ret = gpio_direction_output(kirin_pcie->gpio_id_reset, 1);
- if (ret)
- goto close_clk;
- usleep_range(PERST_2_ACCESS_MIN, PERST_2_ACCESS_MAX);
-
- return 0;
- }
-
-close_clk:
- kirin_pcie_clk_ctrl(kirin_pcie, false);
- return ret;
+ return phy_power_on(kirin_pcie->phy);
}
static void kirin_pcie_sideband_dbi_w_mode(struct kirin_pcie *kirin_pcie,
@@ -444,30 +238,41 @@ static int kirin_pcie_probe(struct platform_device *pdev)
pci->pp.ops = &kirin_pcie_host_ops;
kirin_pcie->pci = pci;
- ret = kirin_pcie_get_clk(kirin_pcie, pdev);
- if (ret)
- return ret;
+ kirin_pcie->phy = devm_of_phy_get(dev, dev->of_node, NULL);
+ if (IS_ERR(kirin_pcie->phy))
+ return PTR_ERR(kirin_pcie->phy);
ret = kirin_pcie_get_resource(kirin_pcie, pdev);
if (ret)
return ret;
- kirin_pcie->gpio_id_reset = of_get_named_gpio(dev->of_node,
- "reset-gpios", 0);
- if (kirin_pcie->gpio_id_reset == -EPROBE_DEFER) {
- return -EPROBE_DEFER;
- } else if (!gpio_is_valid(kirin_pcie->gpio_id_reset)) {
- dev_err(dev, "unable to get a valid gpio pin\n");
- return -ENODEV;
- }
-
ret = kirin_pcie_power_on(kirin_pcie);
if (ret)
return ret;
platform_set_drvdata(pdev, kirin_pcie);
- return dw_pcie_host_init(&pci->pp);
+ ret = dw_pcie_host_init(&pci->pp);
+ if (ret) {
+ phy_power_off(kirin_pcie->phy);
+ goto err;
+ }
+
+ return 0;
+err:
+ phy_exit(kirin_pcie->phy);
+
+ return ret;
+}
+
+static int __exit kirin_pcie_remove(struct platform_device *pdev)
+{
+ struct kirin_pcie *kirin_pcie = platform_get_drvdata(pdev);
+
+ phy_power_off(kirin_pcie->phy);
+ phy_exit(kirin_pcie->phy);
+
+ return 0;
}
static const struct of_device_id kirin_pcie_match[] = {
@@ -477,6 +282,7 @@ static const struct of_device_id kirin_pcie_match[] = {
static struct platform_driver kirin_pcie_driver = {
.probe = kirin_pcie_probe,
+ .remove = __exit_p(kirin_pcie_remove),
.driver = {
.name = "kirin-pcie",
.of_match_table = kirin_pcie_match,
--
2.31.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v3 7/9] PCI: kirin: use regmap for APB registers
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
` (5 preceding siblings ...)
2021-07-09 10:41 ` [PATCH v3 6/9] PCI: kirin: drop the PHY logic from the driver Mauro Carvalho Chehab
@ 2021-07-09 10:41 ` Mauro Carvalho Chehab
2021-07-09 10:41 ` [PATCH v3 8/9] phy: hisilicon: add driver for Kirin 970 PCIe PHY Mauro Carvalho Chehab
` (3 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-09 10:41 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab,
Krzysztof Wilczyński, Binghui Wang, Bjorn Helgaas,
Lorenzo Pieralisi, Xiaowei Song, linux-kernel, linux-pci
The PHY layer need to access APB registers too, for Kirin 970.
So, place them into a named regmap.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/pci/controller/dwc/pcie-kirin.c | 49 +++++++++++++------------
1 file changed, 26 insertions(+), 23 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
index a77bbecbf11f..78271dddf2e8 100644
--- a/drivers/pci/controller/dwc/pcie-kirin.c
+++ b/drivers/pci/controller/dwc/pcie-kirin.c
@@ -54,28 +54,30 @@
struct kirin_pcie {
struct dw_pcie *pci;
struct phy *phy;
- void __iomem *apb_base;
+ struct regmap *apb;
};
-/* Registers in PCIeCTRL */
-static inline void kirin_apb_ctrl_writel(struct kirin_pcie *kirin_pcie,
- u32 val, u32 reg)
-{
- writel(val, kirin_pcie->apb_base + reg);
-}
-
-static inline u32 kirin_apb_ctrl_readl(struct kirin_pcie *kirin_pcie, u32 reg)
-{
- return readl(kirin_pcie->apb_base + reg);
-}
+static const struct regmap_config pcie_kirin_regmap_conf = {
+ .name = "kirin_pcie_apb",
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
static long kirin_pcie_get_resource(struct kirin_pcie *kirin_pcie,
struct platform_device *pdev)
{
- kirin_pcie->apb_base =
- devm_platform_ioremap_resource_byname(pdev, "apb");
- if (IS_ERR(kirin_pcie->apb_base))
- return PTR_ERR(kirin_pcie->apb_base);
+ struct device *dev = &pdev->dev;
+ void __iomem *apb_base;
+
+ apb_base = devm_platform_ioremap_resource_byname(pdev, "apb");
+ if (IS_ERR(apb_base))
+ return PTR_ERR(apb_base);
+
+ kirin_pcie->apb = devm_regmap_init_mmio(dev, apb_base,
+ &pcie_kirin_regmap_conf);
+ if (IS_ERR(kirin_pcie->apb))
+ return PTR_ERR(kirin_pcie->apb);
return 0;
}
@@ -96,13 +98,13 @@ static void kirin_pcie_sideband_dbi_w_mode(struct kirin_pcie *kirin_pcie,
{
u32 val;
- val = kirin_apb_ctrl_readl(kirin_pcie, SOC_PCIECTRL_CTRL0_ADDR);
+ regmap_read(kirin_pcie->apb, SOC_PCIECTRL_CTRL0_ADDR, &val);
if (on)
val = val | PCIE_ELBI_SLV_DBI_ENABLE;
else
val = val & ~PCIE_ELBI_SLV_DBI_ENABLE;
- kirin_apb_ctrl_writel(kirin_pcie, val, SOC_PCIECTRL_CTRL0_ADDR);
+ regmap_write(kirin_pcie->apb, SOC_PCIECTRL_CTRL0_ADDR, val);
}
static void kirin_pcie_sideband_dbi_r_mode(struct kirin_pcie *kirin_pcie,
@@ -110,13 +112,13 @@ static void kirin_pcie_sideband_dbi_r_mode(struct kirin_pcie *kirin_pcie,
{
u32 val;
- val = kirin_apb_ctrl_readl(kirin_pcie, SOC_PCIECTRL_CTRL1_ADDR);
+ regmap_read(kirin_pcie->apb, SOC_PCIECTRL_CTRL1_ADDR, &val);
if (on)
val = val | PCIE_ELBI_SLV_DBI_ENABLE;
else
val = val & ~PCIE_ELBI_SLV_DBI_ENABLE;
- kirin_apb_ctrl_writel(kirin_pcie, val, SOC_PCIECTRL_CTRL1_ADDR);
+ regmap_write(kirin_pcie->apb, SOC_PCIECTRL_CTRL1_ADDR, val);
}
static int kirin_pcie_rd_own_conf(struct pci_bus *bus, unsigned int devfn,
@@ -176,8 +178,9 @@ static void kirin_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
static int kirin_pcie_link_up(struct dw_pcie *pci)
{
struct kirin_pcie *kirin_pcie = to_kirin_pcie(pci);
- u32 val = kirin_apb_ctrl_readl(kirin_pcie, PCIE_APB_PHY_STATUS0);
+ u32 val;
+ regmap_read(kirin_pcie->apb, PCIE_APB_PHY_STATUS0, &val);
if ((val & PCIE_LINKUP_ENABLE) == PCIE_LINKUP_ENABLE)
return 1;
@@ -189,8 +192,8 @@ static int kirin_pcie_start_link(struct dw_pcie *pci)
struct kirin_pcie *kirin_pcie = to_kirin_pcie(pci);
/* assert LTSSM enable */
- kirin_apb_ctrl_writel(kirin_pcie, PCIE_LTSSM_ENABLE_BIT,
- PCIE_APP_LTSSM_ENABLE);
+ regmap_write(kirin_pcie->apb, PCIE_APP_LTSSM_ENABLE,
+ PCIE_LTSSM_ENABLE_BIT);
return 0;
}
--
2.31.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v3 8/9] phy: hisilicon: add driver for Kirin 970 PCIe PHY
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
` (6 preceding siblings ...)
2021-07-09 10:41 ` [PATCH v3 7/9] PCI: kirin: use regmap for APB registers Mauro Carvalho Chehab
@ 2021-07-09 10:41 ` Mauro Carvalho Chehab
2021-07-12 8:16 ` Manivannan Sadhasivam
2021-07-09 10:41 ` [PATCH v3 9/9] arm64: dts: hisilicon: Add support for HiKey 970 PCIe controller hardware Mauro Carvalho Chehab
` (2 subsequent siblings)
10 siblings, 1 reply; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-09 10:41 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab,
Krzysztof Wilczyński, Binghui Wang, Bjorn Helgaas,
Kishon Vijay Abraham I, Lorenzo Pieralisi, Rob Herring,
Vinod Koul, Xiaowei Song, devicetree, linux-kernel, linux-pci,
linux-phy
The Kirin 970 PHY is somewhat similar to the Kirin 960, but it
does a lot more. Add the needed bits for PCIe to start working on
Hikey 970 boards.
Co-developed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../devicetree/bindings/pci/kirin-pcie.txt | 1 +
drivers/pci/controller/dwc/pcie-kirin.c | 1 +
drivers/phy/hisilicon/Kconfig | 10 +
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hi3670-pcie.c | 892 ++++++++++++++++++
5 files changed, 905 insertions(+)
create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
index a93a8cfa1afb..585aadfeafd1 100644
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -10,6 +10,7 @@ Additional properties are described here:
Required properties
- compatible:
"hisilicon,kirin960-pcie"
+ "hisilicon,kirin970-pcie"
- reg: Should contain rc_dbi, apb, config registers location and length.
- reg-names: Must include the following entries:
"dbi": controller configuration registers;
diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
index 78271dddf2e8..c51745f9b56b 100644
--- a/drivers/pci/controller/dwc/pcie-kirin.c
+++ b/drivers/pci/controller/dwc/pcie-kirin.c
@@ -280,6 +280,7 @@ static int __exit kirin_pcie_remove(struct platform_device *pdev)
static const struct of_device_id kirin_pcie_match[] = {
{ .compatible = "hisilicon,kirin960-pcie" },
+ { .compatible = "hisilicon,kirin970-pcie" },
{},
};
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
index c0725907e2cb..e52d54b0c9d6 100644
--- a/drivers/phy/hisilicon/Kconfig
+++ b/drivers/phy/hisilicon/Kconfig
@@ -43,6 +43,16 @@ config PHY_HI3670_USB
To compile this driver as a module, choose M here.
+config PHY_HI3670_PCIE
+ tristate "hi3670 PCIe PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI3670 PCIe PHY.
+
+ To compile this driver as a module, choose M here.
+
config PHY_HISTB_COMBPHY
tristate "HiSilicon STB SoCs COMBPHY support"
depends on (ARCH_HISI && ARM64) || COMPILE_TEST
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
index 3c3d70dd7469..2670f2f382e1 100644
--- a/drivers/phy/hisilicon/Makefile
+++ b/drivers/phy/hisilicon/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o
obj-$(CONFIG_PHY_HI3660_PCIE) += phy-hi3660-pcie.o
obj-$(CONFIG_PHY_HI3670_USB) += phy-hi3670-usb3.o
+obj-$(CONFIG_PHY_HI3670_PCIE) += phy-hi3670-pcie.o
obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o
obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o
obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
diff --git a/drivers/phy/hisilicon/phy-hi3670-pcie.c b/drivers/phy/hisilicon/phy-hi3670-pcie.c
new file mode 100644
index 000000000000..dcbf7d47d8e7
--- /dev/null
+++ b/drivers/phy/hisilicon/phy-hi3670-pcie.c
@@ -0,0 +1,892 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe phy driver for Kirin 970
+ *
+ * Copyright (C) 2017 HiSilicon Electronics Co., Ltd.
+ * https://www.huawei.com
+ * Copyright (C) 2021 Huawei Technologies Co., Ltd.
+ * https://www.huawei.com
+ *
+ * Authors:
+ * Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+ * Manivannan Sadhasivam <mani@kernel.org>
+ *
+ * Based on:
+ * https://lore.kernel.org/lkml/4c9d6581478aa966698758c0420933f5defab4dd.1612335031.git.mchehab+huawei@kernel.org/
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define AXI_CLK_FREQ 207500000
+#define REF_CLK_FREQ 100000000
+
+/* PCIe CTRL registers */
+#define SOC_PCIECTRL_CTRL0_ADDR 0x000
+#define SOC_PCIECTRL_CTRL1_ADDR 0x004
+#define SOC_PCIECTRL_CTRL7_ADDR 0x01c
+#define SOC_PCIECTRL_CTRL12_ADDR 0x030
+#define SOC_PCIECTRL_CTRL20_ADDR 0x050
+#define SOC_PCIECTRL_CTRL21_ADDR 0x054
+#define SOC_PCIECTRL_STATE0_ADDR 0x400
+
+/* PCIe PHY registers */
+#define SOC_PCIEPHY_CTRL0_ADDR 0x000
+#define SOC_PCIEPHY_CTRL1_ADDR 0x004
+#define SOC_PCIEPHY_CTRL2_ADDR 0x008
+#define SOC_PCIEPHY_CTRL3_ADDR 0x00c
+#define SOC_PCIEPHY_CTRL38_ADDR 0x0098
+#define SOC_PCIEPHY_STATE0_ADDR 0x400
+
+#define PCIE_LINKUP_ENABLE (0x8020)
+#define PCIE_ELBI_SLV_DBI_ENABLE (0x1 << 21)
+#define PCIE_LTSSM_ENABLE_BIT (0x1 << 11)
+#define PCIEPHY_RESET_BIT (0x1 << 17)
+#define PCIEPHY_PIPE_LINE0_RESET_BIT (0x1 << 19)
+
+#define PORT_MSI_CTRL_ADDR 0x820
+#define PORT_MSI_CTRL_UPPER_ADDR 0x824
+#define PORT_MSI_CTRL_INT0_ENABLE 0x828
+
+#define EYEPARAM_NOCFG 0xFFFFFFFF
+#define RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1 0x3001
+#define SUP_DIG_LVL_OVRD_IN 0xf
+#define LANEN_DIG_ASIC_TX_OVRD_IN_1 0x1002
+#define LANEN_DIG_ASIC_TX_OVRD_IN_2 0x1003
+
+/* hi3670 pciephy register */
+#define SOC_PCIEPHY_MMC1PLL_CTRL1 0xc04
+#define SOC_PCIEPHY_MMC1PLL_CTRL16 0xC40
+#define SOC_PCIEPHY_MMC1PLL_CTRL17 0xC44
+#define SOC_PCIEPHY_MMC1PLL_CTRL20 0xC50
+#define SOC_PCIEPHY_MMC1PLL_CTRL21 0xC54
+#define SOC_PCIEPHY_MMC1PLL_STAT0 0xE00
+
+#define CRGPERIPH_PEREN12 0x470
+#define CRGPERIPH_PERDIS12 0x474
+#define CRGPERIPH_PCIECTRL0 0x800
+
+/* define ie,oe cfg */
+#define IO_IE_EN_HARD_BYPASS (0x1 << 27)
+#define IO_OE_EN_HARD_BYPASS (0x1 << 11)
+#define IO_HARD_CTRL_DEBOUNCE_BYPASS (0x1 << 10)
+#define IO_OE_GT_MODE (0x2 << 7)
+#define DEBOUNCE_WAITCFG_IN (0xf << 20)
+#define DEBOUNCE_WAITCFG_OUT (0xf << 13)
+
+/* noc power domain */
+#define NOC_POWER_IDLEREQ_1 0x38c
+#define NOC_POWER_IDLE_1 0x394
+#define NOC_PW_MASK 0x10000
+#define NOC_PW_SET_BIT 0x1
+
+/* Number of GPIOs required by PHY */
+#define MAX_GPIO_RESETS 4
+#define MAX_GPIO_CLKREQ 3
+#define NUM_EYEPARAM 5
+
+/* info located in sysctrl */
+#define SCTRL_PCIE_CMOS_OFFSET 0x60
+#define SCTRL_PCIE_CMOS_BIT 0x10
+#define SCTRL_PCIE_ISO_OFFSET 0x44
+#define SCTRL_PCIE_ISO_BIT 0x30
+#define SCTRL_PCIE_HPCLK_OFFSET 0x190
+#define SCTRL_PCIE_HPCLK_BIT 0x184000
+#define SCTRL_PCIE_OE_OFFSET 0x14a
+#define PCIE_DEBOUNCE_PARAM 0xF0F400
+#define PCIE_OE_BYPASS (0x3 << 28)
+
+/* peri_crg ctrl */
+#define CRGCTRL_PCIE_ASSERT_OFFSET 0x88
+#define CRGCTRL_PCIE_ASSERT_BIT 0x8c000000
+
+/* Time for delay */
+#define REF_2_PERST_MIN 20000
+#define REF_2_PERST_MAX 25000
+#define PERST_2_ACCESS_MIN 10000
+#define PERST_2_ACCESS_MAX 12000
+#define PIPE_CLK_WAIT_MIN 550
+#define PIPE_CLK_WAIT_MAX 600
+#define TIME_CMOS_MIN 100
+#define TIME_CMOS_MAX 105
+#define TIME_PHY_PD_MIN 10
+#define TIME_PHY_PD_MAX 11
+
+struct hi3670_pcie_phy {
+ struct device *dev;
+ void __iomem *base;
+ struct regmap *apb;
+ struct regmap *crgctrl;
+ struct regmap *sysctrl;
+ struct regmap *pmctrl;
+ struct clk *apb_sys_clk;
+ struct clk *apb_phy_clk;
+ struct clk *phy_ref_clk;
+ struct clk *pcie_aclk;
+ struct clk *pcie_aux_clk;
+ int n_gpio_resets;
+ int n_gpio_clkreq;
+ int gpio_id_reset[MAX_GPIO_RESETS];
+ const char *reset_names[MAX_GPIO_RESETS];
+ int gpio_id_clkreq[MAX_GPIO_CLKREQ];
+ const char *clkreq_names[MAX_GPIO_CLKREQ];
+ u32 eye_param[NUM_EYEPARAM];
+};
+
+
+/* Registers in PCIePHY */
+static inline void hi3670_apb_phy_writel(struct hi3670_pcie_phy *phy,
+ u32 val, u32 reg)
+{
+ writel(val, phy->base + 0x40000 + reg);
+}
+
+static inline u32 hi3670_apb_phy_readl(struct hi3670_pcie_phy *phy, u32 reg)
+{
+ return readl(phy->base + 0x40000 + reg);
+}
+
+static inline void kirin_apb_natural_phy_writel(struct hi3670_pcie_phy *phy,
+ u32 val, u32 reg)
+{
+ writel(val, phy->base + reg * 4);
+}
+
+static inline u32 kirin_apb_natural_phy_readl(struct hi3670_pcie_phy *phy,
+ u32 reg)
+{
+ return readl(phy->base + reg * 4);
+}
+
+static void hi3670_pcie_phy_oe_enable(struct hi3670_pcie_phy *phy)
+{
+ u32 val;
+
+ regmap_read(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, &val);
+ val |= PCIE_DEBOUNCE_PARAM;
+ val &= ~PCIE_OE_BYPASS;
+ regmap_write(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, val);
+}
+
+void hi3670_pcie_get_eyeparam(struct hi3670_pcie_phy *phy)
+{
+ struct device *dev = phy->dev;
+ struct device_node *np;
+ int ret, i;
+
+ np = dev->of_node;
+
+ ret = of_property_read_u32_array(np, "hisilicon,eye-diagram-param",
+ phy->eye_param, NUM_EYEPARAM);
+ if (!ret)
+ return;
+
+ /* There's no optional eye_param property. Set array to default */
+ for (i = 0; i < NUM_EYEPARAM; i++)
+ phy->eye_param[i] = EYEPARAM_NOCFG;
+}
+
+static void hi3670_pcie_set_eyeparam(struct hi3670_pcie_phy *phy)
+{
+ u32 val;
+
+ val = kirin_apb_natural_phy_readl(phy, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
+
+ if (phy->eye_param[1] != EYEPARAM_NOCFG) {
+ val &= (~0xf00);
+ val |= (phy->eye_param[1] << 8) | (0x1 << 12);
+ }
+ kirin_apb_natural_phy_writel(phy, val, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
+
+ val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_2);
+ val &= (~0x1FBF);
+ if (phy->eye_param[2] != EYEPARAM_NOCFG)
+ val |= (phy->eye_param[2]<< 0) | (0x1 << 6);
+
+ if (phy->eye_param[3] != EYEPARAM_NOCFG)
+ val |= (phy->eye_param[3] << 7) | (0x1 << 13);
+
+ kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_2);
+
+ val = kirin_apb_natural_phy_readl(phy, SUP_DIG_LVL_OVRD_IN);
+ if (phy->eye_param[0] != EYEPARAM_NOCFG) {
+ val &= (~0x1C0);
+ val |= (phy->eye_param[0] << 6) | (0x1 << 9);
+ }
+ kirin_apb_natural_phy_writel(phy, val, SUP_DIG_LVL_OVRD_IN);
+
+ val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_1);
+ if (phy->eye_param[4] != EYEPARAM_NOCFG) {
+ val &= (~0x7E00);
+ val |= (phy->eye_param[4] << 9) | (0x1 << 15);
+ }
+ kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_1);
+}
+
+static int hi3670_pcie_gpio_request(struct hi3670_pcie_phy *phy,
+ struct device *dev)
+{
+ int ret, i;
+
+ for (i = 0; i < phy->n_gpio_resets; i++) {
+ if (!gpio_is_valid(phy->gpio_id_reset[i])) {
+ dev_err(dev, "unable to get a valid %s gpio\n",
+ phy->reset_names[i]);
+ return -ENODEV;
+ }
+
+ ret = devm_gpio_request(dev, phy->gpio_id_reset[i],
+ phy->reset_names[i]);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < phy->n_gpio_clkreq; i++) {
+ if (!gpio_is_valid(phy->gpio_id_clkreq[i])) {
+ dev_err(dev, "unable to get a valid %s gpio\n",
+ phy->clkreq_names[i]);
+ return -ENODEV;
+ }
+
+ ret = devm_gpio_request(dev, phy->gpio_id_clkreq[i],
+ phy->clkreq_names[i]);
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
+static void hi3670_pcie_natural_cfg(struct hi3670_pcie_phy *phy)
+{
+ u32 val;
+
+ /* change 2p mem_ctrl */
+ regmap_write(phy->apb, SOC_PCIECTRL_CTRL20_ADDR, 0x02605550);
+
+ /* pull up sys_aux_pwr_det */
+ regmap_read(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, &val);
+ val |= (0x1 << 10);
+ regmap_write(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, val);
+
+ /* output, pull down */
+ regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
+ val &= ~(0x3 << 2);
+ val |= (0x1 << 1);
+ val &= ~(0x1 << 0);
+ regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
+
+ /* Handle phy_reset and lane0_reset to HW */
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL1_ADDR);
+ val |= PCIEPHY_RESET_BIT;
+ val &= ~PCIEPHY_PIPE_LINE0_RESET_BIT;
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL1_ADDR);
+
+ /* fix chip bug: TxDetectRx fail */
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL38_ADDR);
+ val |= (0x1 << 2);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL38_ADDR);
+}
+
+static void hi3670_pcie_pll_init(struct hi3670_pcie_phy *phy)
+{
+ u32 val;
+
+ /* choose FNPLL */
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL1);
+ val |= (0x1 << 27);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL1);
+
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
+ val &= 0xF000FFFF;
+ /* fnpll fbdiv = 0xD0 */
+ val |= (0xd0 << 16);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL17);
+ val &= 0xFF000000;
+ /* fnpll fracdiv = 0x555555 */
+ val |= (0x555555 << 0);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL17);
+
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
+ val &= 0xF5FF88FF;
+ /* fnpll dll_en = 0x1 */
+ val |= (0x1 << 27);
+ /* fnpll postdiv1 = 0x5 */
+ val |= (0x5 << 8);
+ /* fnpll postdiv2 = 0x4 */
+ val |= (0x4 << 12);
+ /* fnpll pll_mode = 0x0 */
+ val &= ~(0x1 << 25);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
+
+ hi3670_apb_phy_writel(phy, 0x20, SOC_PCIEPHY_MMC1PLL_CTRL21);
+}
+
+static int hi3670_pcie_pll_ctrl(struct hi3670_pcie_phy *phy, bool enable)
+{
+ struct device *dev = phy->dev;
+ u32 val;
+ int time = 200;
+
+ if (enable) {
+ /* pd = 0 */
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
+ val &= ~(0x1 << 0);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
+
+ /* choose FNPLL */
+ while (!(val & 0x10)) {
+ if (!time) {
+ dev_err(dev, "wait for pll_lock timeout\n");
+ return -1;
+ }
+ time --;
+ udelay(1);
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
+ }
+
+ /* pciepll_bp = 0 */
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
+ val &= ~(0x1 << 16);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
+
+ } else {
+ /* pd = 1 */
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
+ val |= (0x1 << 0);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
+
+ /* pciepll_bp = 1 */
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
+ val |= (0x1 << 16);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
+ }
+
+ return 0;
+}
+
+static void hi3670_pcie_hp_debounce_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+ if (open)
+ /* gt_clk_pcie_hp/gt_clk_pcie_debounce open */
+ regmap_write(phy->crgctrl, CRGPERIPH_PEREN12, 0x9000);
+ else
+ /* gt_clk_pcie_hp/gt_clk_pcie_debounce close */
+ regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x9000);
+}
+
+static void hi3670_pcie_phyref_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+ unsigned int val;
+
+ regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+
+ if (open)
+ val &= ~(0x1 << 1); //enable hard gt mode
+ else
+ val |= (0x1 << 1); //disable hard gt mode
+
+ regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+ /* disable soft gt mode */
+ regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x4000);
+}
+
+static void hi3670_pcie_oe_ctrl(struct hi3670_pcie_phy *phy, bool en_flag)
+{
+ unsigned int val;
+
+ regmap_read(phy->crgctrl , CRGPERIPH_PCIECTRL0, &val);
+
+ /* set ie cfg */
+ val |= IO_IE_EN_HARD_BYPASS;
+
+ /* set oe cfg */
+ val &= ~IO_HARD_CTRL_DEBOUNCE_BYPASS;
+
+ /* set phy_debounce in&out time */
+ val |= (DEBOUNCE_WAITCFG_IN | DEBOUNCE_WAITCFG_OUT);
+
+ /* select oe_gt_mode */
+ val |= IO_OE_GT_MODE;
+
+ if (en_flag)
+ val &= ~IO_OE_EN_HARD_BYPASS;
+ else
+ val |= IO_OE_EN_HARD_BYPASS;
+
+ regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+}
+
+static void hi3670_pcie_ioref_gt(struct hi3670_pcie_phy *phy, bool open)
+{
+ unsigned int val;
+
+ if (open) {
+ regmap_write(phy->apb, SOC_PCIECTRL_CTRL21_ADDR, 0x20000070);
+
+ hi3670_pcie_oe_ctrl(phy, true);
+
+ /* en hard gt mode */
+ regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+ val &= ~(0x1 << 0);
+ regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+ /* disable soft gt mode */
+ regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x2000);
+
+ } else {
+ /* disable hard gt mode */
+ regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
+ val |= (0x1 << 0);
+ regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
+
+ /* disable soft gt mode */
+ regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x2000);
+
+ hi3670_pcie_oe_ctrl(phy, false);
+ }
+}
+
+static int hi3670_pcie_allclk_ctrl(struct hi3670_pcie_phy *phy, bool clk_on)
+{
+ struct device *dev = phy->dev;
+ u32 val;
+ int ret = 0;
+
+ if (!clk_on)
+ goto close_clocks;
+
+ /* choose 100MHz clk src: Bit[8]==1 pad, Bit[8]==0 pll */
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL1_ADDR);
+ val &= ~(0x1 << 8);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL1_ADDR);
+
+ hi3670_pcie_pll_init(phy);
+
+ ret = hi3670_pcie_pll_ctrl(phy, true);
+ if (ret) {
+ dev_err(dev, "Failed to enable pll\n");
+ return -1;
+ }
+ hi3670_pcie_hp_debounce_gt(phy, true);
+ hi3670_pcie_phyref_gt(phy, true);
+ hi3670_pcie_ioref_gt(phy, true);
+
+ ret = clk_set_rate(phy->pcie_aclk, AXI_CLK_FREQ);
+ if (ret) {
+ dev_err(dev, "Failed to set rate\n");
+ goto close_clocks;
+ }
+
+ return 0;
+
+close_clocks:
+ hi3670_pcie_ioref_gt(phy, false);
+ hi3670_pcie_phyref_gt(phy, false);
+ hi3670_pcie_hp_debounce_gt(phy, false);
+
+ hi3670_pcie_pll_ctrl(phy, false);
+
+ return ret;
+}
+
+static bool is_pipe_clk_stable(struct hi3670_pcie_phy *phy)
+{
+ struct device *dev = phy->dev;
+ u32 val;
+ u32 time = 100;
+ u32 pipe_clk_stable = 0x1 << 19;
+
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
+ while (val & pipe_clk_stable) {
+ mdelay(1);
+ if (time == 0) {
+ dev_err(dev, "PIPE clk is not stable\n");
+ return false;
+ }
+ time--;
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
+ }
+
+ return true;
+}
+
+static int hi3670_pcie_noc_power(struct hi3670_pcie_phy *phy, bool enable)
+{
+ struct device *dev = phy->dev;
+ u32 time = 100;
+ unsigned int val = NOC_PW_MASK;
+ int rst;
+
+ if (enable)
+ val = NOC_PW_MASK | NOC_PW_SET_BIT;
+ else
+ val = NOC_PW_MASK;
+ rst = enable ? 1 : 0;
+
+ regmap_write(phy->pmctrl, NOC_POWER_IDLEREQ_1, val);
+
+ time = 100;
+ regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
+ while((val & NOC_PW_SET_BIT) != rst) {
+ udelay(10);
+ if (!time) {
+ dev_err(dev, "Failed to reverse noc power-status\n");
+ return -1;
+ }
+ time--;
+ regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
+ }
+
+ return 0;
+}
+
+static int hi3670_pcie_get_apb(struct hi3670_pcie_phy *phy)
+{
+ struct device_node *pcie_port;
+ struct device *dev = phy->dev;
+ struct device *pcie_dev;
+
+ pcie_port = of_get_child_by_name(dev->parent->of_node, "pcie");
+ if (!pcie_port) {
+ dev_err(dev, "no pcie node found in %s\n",
+ dev->parent->of_node->full_name);
+ return -ENODEV;
+ }
+
+ pcie_dev = bus_find_device_by_of_node(&platform_bus_type, pcie_port);
+ if (!pcie_dev) {
+ dev_err(dev, "Didn't find pcie device\n");
+ return -ENODEV;
+ }
+
+ /*
+ * We might just use NULL instead of the APB name, as the
+ * pcie-kirin currently registers directly just one regmap (although
+ * the DWC driver register other regmaps).
+ *
+ * Yet, it sounds safer to warrant that it will be accessing the
+ * right regmap. So, let's use the named version.
+ */
+ phy->apb = dev_get_regmap(pcie_dev, "kirin_pcie_apb");
+ if (!phy->apb) {
+ dev_err(dev, "Failed to get APB regmap\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+
+static int kirin_pcie_clk_ctrl(struct hi3670_pcie_phy *phy, bool enable)
+{
+ int ret = 0;
+
+ if (!enable)
+ goto close_clk;
+
+ ret = clk_set_rate(phy->phy_ref_clk, REF_CLK_FREQ);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy->phy_ref_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy->apb_sys_clk);
+ if (ret)
+ goto apb_sys_fail;
+
+ ret = clk_prepare_enable(phy->apb_phy_clk);
+ if (ret)
+ goto apb_phy_fail;
+
+ ret = clk_prepare_enable(phy->pcie_aclk);
+ if (ret)
+ goto aclk_fail;
+
+ ret = clk_prepare_enable(phy->pcie_aux_clk);
+ if (ret)
+ goto aux_clk_fail;
+
+ return 0;
+
+close_clk:
+ clk_disable_unprepare(phy->pcie_aux_clk);
+aux_clk_fail:
+ clk_disable_unprepare(phy->pcie_aclk);
+aclk_fail:
+ clk_disable_unprepare(phy->apb_phy_clk);
+apb_phy_fail:
+ clk_disable_unprepare(phy->apb_sys_clk);
+apb_sys_fail:
+ clk_disable_unprepare(phy->phy_ref_clk);
+
+ return ret;
+}
+
+static int hi3670_pcie_phy_init(struct phy *generic_phy)
+{
+ struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+ struct device *dev = phy->dev;
+ int ret;
+
+ /*
+ * The code under hi3670_pcie_get_apb() need to access the
+ * DWC APB registers. So, get them from
+ * the pcie driver's regmap (see pcie-kirin regmap).
+ *
+ * Such kind of resource can only be obtained during the PCIe
+ * power_on sequence, as the code inside pcie-kirin needs to
+ * be already probed, as it needs to register the APB regmap.
+ */
+
+ ret = hi3670_pcie_get_apb(phy);
+ if (ret)
+ return ret;
+
+ /* phy regulator needs to be powered on before calling it */
+ return hi3670_pcie_gpio_request(phy, dev);
+}
+
+static int hi3670_pcie_phy_power_on(struct phy *generic_phy)
+{
+ struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+ int val, ret, i;
+
+ /* Power supply for Host */
+ regmap_write(phy->sysctrl,
+ SCTRL_PCIE_CMOS_OFFSET, SCTRL_PCIE_CMOS_BIT);
+ usleep_range(TIME_CMOS_MIN, TIME_CMOS_MAX);
+
+ hi3670_pcie_phy_oe_enable(phy);
+
+ for (i = 0; i < phy->n_gpio_clkreq; i++) {
+ ret = gpio_direction_output(phy->gpio_id_clkreq[i], 0);
+ if (ret)
+ return ret;
+ }
+
+ ret = kirin_pcie_clk_ctrl(phy, true);
+ if (ret)
+ return ret;
+
+ /* ISO disable, PCIeCtrl, PHY assert and clk gate clear */
+ regmap_write(phy->sysctrl,
+ SCTRL_PCIE_ISO_OFFSET, SCTRL_PCIE_ISO_BIT);
+ regmap_write(phy->crgctrl,
+ CRGCTRL_PCIE_ASSERT_OFFSET, CRGCTRL_PCIE_ASSERT_BIT);
+ regmap_write(phy->sysctrl,
+ SCTRL_PCIE_HPCLK_OFFSET, SCTRL_PCIE_HPCLK_BIT);
+
+ hi3670_pcie_natural_cfg(phy);
+
+ ret = hi3670_pcie_allclk_ctrl(phy, true);
+ if (ret)
+ goto disable_clks;
+
+ /* pull down phy_test_powerdown signal */
+ val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL0_ADDR);
+ val &= ~(0x1 << 22);
+ hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL0_ADDR);
+
+ /* deassert controller perst_n */
+ regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
+ val |= (0x1 << 2);
+ regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
+ udelay(10);
+
+ /* perst assert Endpoints */
+ usleep_range(21000, 23000);
+ for (i = 0; i < phy->n_gpio_resets; i++) {
+ ret = gpio_direction_output(phy->gpio_id_reset[i], 1);
+ if (ret)
+ return ret;
+ }
+ usleep_range(10000, 11000);
+
+ ret = is_pipe_clk_stable(phy);
+ if (!ret)
+ goto disable_clks;
+
+ hi3670_pcie_set_eyeparam(phy);
+
+ ret = hi3670_pcie_noc_power(phy, false);
+ if (ret)
+ goto disable_clks;
+
+ return 0;
+
+disable_clks:
+ kirin_pcie_clk_ctrl(phy, false);
+ return ret;
+}
+
+static int hi3670_pcie_phy_power_off(struct phy *generic_phy)
+{
+ struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
+
+ /* Drop power supply for Host */
+ regmap_write(phy->sysctrl, SCTRL_PCIE_CMOS_OFFSET, 0x00);
+
+ kirin_pcie_clk_ctrl(phy, false);
+
+ return 0;
+}
+
+static const struct phy_ops hi3670_phy_ops = {
+ .init = hi3670_pcie_phy_init,
+ .power_on = hi3670_pcie_phy_power_on,
+ .power_off = hi3670_pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int hi3670_pcie_phy_get_resources(struct hi3670_pcie_phy *phy,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ char name[32];
+ int i;
+
+ /* syscon */
+ phy->crgctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-crgctrl");
+ if (IS_ERR(phy->crgctrl))
+ return PTR_ERR(phy->crgctrl);
+
+ phy->sysctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-sctrl");
+ if (IS_ERR(phy->sysctrl))
+ return PTR_ERR(phy->sysctrl);
+
+ phy->pmctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-pmctrl");
+ if (IS_ERR(phy->sysctrl))
+ return PTR_ERR(phy->sysctrl);
+
+ /* clocks */
+ phy->phy_ref_clk = devm_clk_get(dev, "pcie_phy_ref");
+ if (IS_ERR(phy->phy_ref_clk))
+ return PTR_ERR(phy->phy_ref_clk);
+
+ phy->pcie_aux_clk = devm_clk_get(dev, "pcie_aux");
+ if (IS_ERR(phy->pcie_aux_clk))
+ return PTR_ERR(phy->pcie_aux_clk);
+
+ phy->apb_phy_clk = devm_clk_get(dev, "pcie_apb_phy");
+ if (IS_ERR(phy->apb_phy_clk))
+ return PTR_ERR(phy->apb_phy_clk);
+
+ phy->apb_sys_clk = devm_clk_get(dev, "pcie_apb_sys");
+ if (IS_ERR(phy->apb_sys_clk))
+ return PTR_ERR(phy->apb_sys_clk);
+
+ phy->pcie_aclk = devm_clk_get(dev, "pcie_aclk");
+ if (IS_ERR(phy->pcie_aclk))
+ return PTR_ERR(phy->pcie_aclk);
+
+ /* registers */
+ phy->base = devm_platform_ioremap_resource_byname(pdev, "phy");
+ if (IS_ERR(phy->base))
+ return PTR_ERR(phy->base);
+
+ /* perst reset gpios */
+ phy->n_gpio_resets = of_gpio_named_count(np, "reset-gpios");
+ if (phy->n_gpio_resets > MAX_GPIO_RESETS) {
+ dev_err(dev, "Too many GPIO resets!\n");
+ return -EINVAL;
+ }
+ for (i = 0; i < phy->n_gpio_resets; i++) {
+ phy->gpio_id_reset[i] = of_get_named_gpio(dev->of_node,
+ "reset-gpios", i);
+ if (phy->gpio_id_reset[i] < 0)
+ return phy->gpio_id_reset[i];
+
+ sprintf(name, "pcie_perst_%d", i);
+
+ phy->reset_names[i] = devm_kstrdup_const(dev, name,
+ GFP_KERNEL);
+ if (!phy->reset_names[i])
+ return -ENOMEM;
+ }
+
+ /* clock request gpios */
+ phy->n_gpio_clkreq = of_gpio_named_count(np, "clkreq-gpios");
+ if (phy->n_gpio_clkreq > MAX_GPIO_CLKREQ) {
+ dev_err(dev, "Too many GPIO clock requests!\n");
+ return -EINVAL;
+ }
+ for (i = 0; i < phy->n_gpio_clkreq; i++) {
+ phy->gpio_id_clkreq[i] = of_get_named_gpio(dev->of_node,
+ "clkreq-gpios", i);
+ if (phy->gpio_id_clkreq[i] < 0)
+ return phy->gpio_id_clkreq[i];
+
+ sprintf(name, "pcie_clkreq_%d", i);
+ phy->clkreq_names[i] = devm_kstrdup_const(dev, name,
+ GFP_KERNEL);
+ if (!phy->clkreq_names[i])
+ return -ENOMEM;
+ }
+
+ hi3670_pcie_get_eyeparam(phy);
+
+ return 0;
+}
+
+static int hi3670_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct hi3670_pcie_phy *phy;
+ struct phy *generic_phy;
+ int ret;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->dev = dev;
+
+ ret = hi3670_pcie_phy_get_resources(phy, pdev);
+ if (ret)
+ return ret;
+
+ generic_phy = devm_phy_create(dev, dev->of_node, &hi3670_phy_ops);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id hi3670_pcie_phy_match[] = {
+ {
+ .compatible = "hisilicon,hi970-pcie-phy",
+ },
+ {},
+};
+
+static struct platform_driver hi3670_pcie_phy_driver = {
+ .probe = hi3670_pcie_phy_probe,
+ .driver = {
+ .of_match_table = hi3670_pcie_phy_match,
+ .name = "hi3670_pcie_phy",
+ .suppress_bind_attrs = true,
+ }
+};
+builtin_platform_driver(hi3670_pcie_phy_driver);
--
2.31.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v3 8/9] phy: hisilicon: add driver for Kirin 970 PCIe PHY
2021-07-09 10:41 ` [PATCH v3 8/9] phy: hisilicon: add driver for Kirin 970 PCIe PHY Mauro Carvalho Chehab
@ 2021-07-12 8:16 ` Manivannan Sadhasivam
0 siblings, 0 replies; 15+ messages in thread
From: Manivannan Sadhasivam @ 2021-07-12 8:16 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Rob Herring, linuxarm, mauro.chehab, Krzysztof Wilczyński,
Binghui Wang, Bjorn Helgaas, Kishon Vijay Abraham I,
Lorenzo Pieralisi, Rob Herring, Vinod Koul, Xiaowei Song,
devicetree, linux-kernel, linux-pci, linux-phy
On Fri, Jul 09, 2021 at 12:41:44PM +0200, Mauro Carvalho Chehab wrote:
> The Kirin 970 PHY is somewhat similar to the Kirin 960, but it
> does a lot more. Add the needed bits for PCIe to start working on
> Hikey 970 boards.
>
> Co-developed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Thanks,
Mani
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../devicetree/bindings/pci/kirin-pcie.txt | 1 +
> drivers/pci/controller/dwc/pcie-kirin.c | 1 +
> drivers/phy/hisilicon/Kconfig | 10 +
> drivers/phy/hisilicon/Makefile | 1 +
> drivers/phy/hisilicon/phy-hi3670-pcie.c | 892 ++++++++++++++++++
> 5 files changed, 905 insertions(+)
> create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c
>
> diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> index a93a8cfa1afb..585aadfeafd1 100644
> --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> @@ -10,6 +10,7 @@ Additional properties are described here:
> Required properties
> - compatible:
> "hisilicon,kirin960-pcie"
> + "hisilicon,kirin970-pcie"
> - reg: Should contain rc_dbi, apb, config registers location and length.
> - reg-names: Must include the following entries:
> "dbi": controller configuration registers;
> diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
> index 78271dddf2e8..c51745f9b56b 100644
> --- a/drivers/pci/controller/dwc/pcie-kirin.c
> +++ b/drivers/pci/controller/dwc/pcie-kirin.c
> @@ -280,6 +280,7 @@ static int __exit kirin_pcie_remove(struct platform_device *pdev)
>
> static const struct of_device_id kirin_pcie_match[] = {
> { .compatible = "hisilicon,kirin960-pcie" },
> + { .compatible = "hisilicon,kirin970-pcie" },
> {},
> };
>
> diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
> index c0725907e2cb..e52d54b0c9d6 100644
> --- a/drivers/phy/hisilicon/Kconfig
> +++ b/drivers/phy/hisilicon/Kconfig
> @@ -43,6 +43,16 @@ config PHY_HI3670_USB
>
> To compile this driver as a module, choose M here.
>
> +config PHY_HI3670_PCIE
> + tristate "hi3670 PCIe PHY support"
> + depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> + select GENERIC_PHY
> + select MFD_SYSCON
> + help
> + Enable this to support the HISILICON HI3670 PCIe PHY.
> +
> + To compile this driver as a module, choose M here.
> +
> config PHY_HISTB_COMBPHY
> tristate "HiSilicon STB SoCs COMBPHY support"
> depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
> index 3c3d70dd7469..2670f2f382e1 100644
> --- a/drivers/phy/hisilicon/Makefile
> +++ b/drivers/phy/hisilicon/Makefile
> @@ -3,6 +3,7 @@ obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
> obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o
> obj-$(CONFIG_PHY_HI3660_PCIE) += phy-hi3660-pcie.o
> obj-$(CONFIG_PHY_HI3670_USB) += phy-hi3670-usb3.o
> +obj-$(CONFIG_PHY_HI3670_PCIE) += phy-hi3670-pcie.o
> obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o
> obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o
> obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
> diff --git a/drivers/phy/hisilicon/phy-hi3670-pcie.c b/drivers/phy/hisilicon/phy-hi3670-pcie.c
> new file mode 100644
> index 000000000000..dcbf7d47d8e7
> --- /dev/null
> +++ b/drivers/phy/hisilicon/phy-hi3670-pcie.c
> @@ -0,0 +1,892 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe phy driver for Kirin 970
> + *
> + * Copyright (C) 2017 HiSilicon Electronics Co., Ltd.
> + * https://www.huawei.com
> + * Copyright (C) 2021 Huawei Technologies Co., Ltd.
> + * https://www.huawei.com
> + *
> + * Authors:
> + * Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> + * Manivannan Sadhasivam <mani@kernel.org>
> + *
> + * Based on:
> + * https://lore.kernel.org/lkml/4c9d6581478aa966698758c0420933f5defab4dd.1612335031.git.mchehab+huawei@kernel.org/
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/gpio.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define AXI_CLK_FREQ 207500000
> +#define REF_CLK_FREQ 100000000
> +
> +/* PCIe CTRL registers */
> +#define SOC_PCIECTRL_CTRL0_ADDR 0x000
> +#define SOC_PCIECTRL_CTRL1_ADDR 0x004
> +#define SOC_PCIECTRL_CTRL7_ADDR 0x01c
> +#define SOC_PCIECTRL_CTRL12_ADDR 0x030
> +#define SOC_PCIECTRL_CTRL20_ADDR 0x050
> +#define SOC_PCIECTRL_CTRL21_ADDR 0x054
> +#define SOC_PCIECTRL_STATE0_ADDR 0x400
> +
> +/* PCIe PHY registers */
> +#define SOC_PCIEPHY_CTRL0_ADDR 0x000
> +#define SOC_PCIEPHY_CTRL1_ADDR 0x004
> +#define SOC_PCIEPHY_CTRL2_ADDR 0x008
> +#define SOC_PCIEPHY_CTRL3_ADDR 0x00c
> +#define SOC_PCIEPHY_CTRL38_ADDR 0x0098
> +#define SOC_PCIEPHY_STATE0_ADDR 0x400
> +
> +#define PCIE_LINKUP_ENABLE (0x8020)
> +#define PCIE_ELBI_SLV_DBI_ENABLE (0x1 << 21)
> +#define PCIE_LTSSM_ENABLE_BIT (0x1 << 11)
> +#define PCIEPHY_RESET_BIT (0x1 << 17)
> +#define PCIEPHY_PIPE_LINE0_RESET_BIT (0x1 << 19)
> +
> +#define PORT_MSI_CTRL_ADDR 0x820
> +#define PORT_MSI_CTRL_UPPER_ADDR 0x824
> +#define PORT_MSI_CTRL_INT0_ENABLE 0x828
> +
> +#define EYEPARAM_NOCFG 0xFFFFFFFF
> +#define RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1 0x3001
> +#define SUP_DIG_LVL_OVRD_IN 0xf
> +#define LANEN_DIG_ASIC_TX_OVRD_IN_1 0x1002
> +#define LANEN_DIG_ASIC_TX_OVRD_IN_2 0x1003
> +
> +/* hi3670 pciephy register */
> +#define SOC_PCIEPHY_MMC1PLL_CTRL1 0xc04
> +#define SOC_PCIEPHY_MMC1PLL_CTRL16 0xC40
> +#define SOC_PCIEPHY_MMC1PLL_CTRL17 0xC44
> +#define SOC_PCIEPHY_MMC1PLL_CTRL20 0xC50
> +#define SOC_PCIEPHY_MMC1PLL_CTRL21 0xC54
> +#define SOC_PCIEPHY_MMC1PLL_STAT0 0xE00
> +
> +#define CRGPERIPH_PEREN12 0x470
> +#define CRGPERIPH_PERDIS12 0x474
> +#define CRGPERIPH_PCIECTRL0 0x800
> +
> +/* define ie,oe cfg */
> +#define IO_IE_EN_HARD_BYPASS (0x1 << 27)
> +#define IO_OE_EN_HARD_BYPASS (0x1 << 11)
> +#define IO_HARD_CTRL_DEBOUNCE_BYPASS (0x1 << 10)
> +#define IO_OE_GT_MODE (0x2 << 7)
> +#define DEBOUNCE_WAITCFG_IN (0xf << 20)
> +#define DEBOUNCE_WAITCFG_OUT (0xf << 13)
> +
> +/* noc power domain */
> +#define NOC_POWER_IDLEREQ_1 0x38c
> +#define NOC_POWER_IDLE_1 0x394
> +#define NOC_PW_MASK 0x10000
> +#define NOC_PW_SET_BIT 0x1
> +
> +/* Number of GPIOs required by PHY */
> +#define MAX_GPIO_RESETS 4
> +#define MAX_GPIO_CLKREQ 3
> +#define NUM_EYEPARAM 5
> +
> +/* info located in sysctrl */
> +#define SCTRL_PCIE_CMOS_OFFSET 0x60
> +#define SCTRL_PCIE_CMOS_BIT 0x10
> +#define SCTRL_PCIE_ISO_OFFSET 0x44
> +#define SCTRL_PCIE_ISO_BIT 0x30
> +#define SCTRL_PCIE_HPCLK_OFFSET 0x190
> +#define SCTRL_PCIE_HPCLK_BIT 0x184000
> +#define SCTRL_PCIE_OE_OFFSET 0x14a
> +#define PCIE_DEBOUNCE_PARAM 0xF0F400
> +#define PCIE_OE_BYPASS (0x3 << 28)
> +
> +/* peri_crg ctrl */
> +#define CRGCTRL_PCIE_ASSERT_OFFSET 0x88
> +#define CRGCTRL_PCIE_ASSERT_BIT 0x8c000000
> +
> +/* Time for delay */
> +#define REF_2_PERST_MIN 20000
> +#define REF_2_PERST_MAX 25000
> +#define PERST_2_ACCESS_MIN 10000
> +#define PERST_2_ACCESS_MAX 12000
> +#define PIPE_CLK_WAIT_MIN 550
> +#define PIPE_CLK_WAIT_MAX 600
> +#define TIME_CMOS_MIN 100
> +#define TIME_CMOS_MAX 105
> +#define TIME_PHY_PD_MIN 10
> +#define TIME_PHY_PD_MAX 11
> +
> +struct hi3670_pcie_phy {
> + struct device *dev;
> + void __iomem *base;
> + struct regmap *apb;
> + struct regmap *crgctrl;
> + struct regmap *sysctrl;
> + struct regmap *pmctrl;
> + struct clk *apb_sys_clk;
> + struct clk *apb_phy_clk;
> + struct clk *phy_ref_clk;
> + struct clk *pcie_aclk;
> + struct clk *pcie_aux_clk;
> + int n_gpio_resets;
> + int n_gpio_clkreq;
> + int gpio_id_reset[MAX_GPIO_RESETS];
> + const char *reset_names[MAX_GPIO_RESETS];
> + int gpio_id_clkreq[MAX_GPIO_CLKREQ];
> + const char *clkreq_names[MAX_GPIO_CLKREQ];
> + u32 eye_param[NUM_EYEPARAM];
> +};
> +
> +
> +/* Registers in PCIePHY */
> +static inline void hi3670_apb_phy_writel(struct hi3670_pcie_phy *phy,
> + u32 val, u32 reg)
> +{
> + writel(val, phy->base + 0x40000 + reg);
> +}
> +
> +static inline u32 hi3670_apb_phy_readl(struct hi3670_pcie_phy *phy, u32 reg)
> +{
> + return readl(phy->base + 0x40000 + reg);
> +}
> +
> +static inline void kirin_apb_natural_phy_writel(struct hi3670_pcie_phy *phy,
> + u32 val, u32 reg)
> +{
> + writel(val, phy->base + reg * 4);
> +}
> +
> +static inline u32 kirin_apb_natural_phy_readl(struct hi3670_pcie_phy *phy,
> + u32 reg)
> +{
> + return readl(phy->base + reg * 4);
> +}
> +
> +static void hi3670_pcie_phy_oe_enable(struct hi3670_pcie_phy *phy)
> +{
> + u32 val;
> +
> + regmap_read(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, &val);
> + val |= PCIE_DEBOUNCE_PARAM;
> + val &= ~PCIE_OE_BYPASS;
> + regmap_write(phy->sysctrl, SCTRL_PCIE_OE_OFFSET, val);
> +}
> +
> +void hi3670_pcie_get_eyeparam(struct hi3670_pcie_phy *phy)
> +{
> + struct device *dev = phy->dev;
> + struct device_node *np;
> + int ret, i;
> +
> + np = dev->of_node;
> +
> + ret = of_property_read_u32_array(np, "hisilicon,eye-diagram-param",
> + phy->eye_param, NUM_EYEPARAM);
> + if (!ret)
> + return;
> +
> + /* There's no optional eye_param property. Set array to default */
> + for (i = 0; i < NUM_EYEPARAM; i++)
> + phy->eye_param[i] = EYEPARAM_NOCFG;
> +}
> +
> +static void hi3670_pcie_set_eyeparam(struct hi3670_pcie_phy *phy)
> +{
> + u32 val;
> +
> + val = kirin_apb_natural_phy_readl(phy, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
> +
> + if (phy->eye_param[1] != EYEPARAM_NOCFG) {
> + val &= (~0xf00);
> + val |= (phy->eye_param[1] << 8) | (0x1 << 12);
> + }
> + kirin_apb_natural_phy_writel(phy, val, RAWLANEN_DIG_PCS_XF_TX_OVRD_IN_1);
> +
> + val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_2);
> + val &= (~0x1FBF);
> + if (phy->eye_param[2] != EYEPARAM_NOCFG)
> + val |= (phy->eye_param[2]<< 0) | (0x1 << 6);
> +
> + if (phy->eye_param[3] != EYEPARAM_NOCFG)
> + val |= (phy->eye_param[3] << 7) | (0x1 << 13);
> +
> + kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_2);
> +
> + val = kirin_apb_natural_phy_readl(phy, SUP_DIG_LVL_OVRD_IN);
> + if (phy->eye_param[0] != EYEPARAM_NOCFG) {
> + val &= (~0x1C0);
> + val |= (phy->eye_param[0] << 6) | (0x1 << 9);
> + }
> + kirin_apb_natural_phy_writel(phy, val, SUP_DIG_LVL_OVRD_IN);
> +
> + val = kirin_apb_natural_phy_readl(phy, LANEN_DIG_ASIC_TX_OVRD_IN_1);
> + if (phy->eye_param[4] != EYEPARAM_NOCFG) {
> + val &= (~0x7E00);
> + val |= (phy->eye_param[4] << 9) | (0x1 << 15);
> + }
> + kirin_apb_natural_phy_writel(phy, val, LANEN_DIG_ASIC_TX_OVRD_IN_1);
> +}
> +
> +static int hi3670_pcie_gpio_request(struct hi3670_pcie_phy *phy,
> + struct device *dev)
> +{
> + int ret, i;
> +
> + for (i = 0; i < phy->n_gpio_resets; i++) {
> + if (!gpio_is_valid(phy->gpio_id_reset[i])) {
> + dev_err(dev, "unable to get a valid %s gpio\n",
> + phy->reset_names[i]);
> + return -ENODEV;
> + }
> +
> + ret = devm_gpio_request(dev, phy->gpio_id_reset[i],
> + phy->reset_names[i]);
> + if (ret)
> + return ret;
> + }
> +
> + for (i = 0; i < phy->n_gpio_clkreq; i++) {
> + if (!gpio_is_valid(phy->gpio_id_clkreq[i])) {
> + dev_err(dev, "unable to get a valid %s gpio\n",
> + phy->clkreq_names[i]);
> + return -ENODEV;
> + }
> +
> + ret = devm_gpio_request(dev, phy->gpio_id_clkreq[i],
> + phy->clkreq_names[i]);
> + if (ret)
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +static void hi3670_pcie_natural_cfg(struct hi3670_pcie_phy *phy)
> +{
> + u32 val;
> +
> + /* change 2p mem_ctrl */
> + regmap_write(phy->apb, SOC_PCIECTRL_CTRL20_ADDR, 0x02605550);
> +
> + /* pull up sys_aux_pwr_det */
> + regmap_read(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, &val);
> + val |= (0x1 << 10);
> + regmap_write(phy->apb, SOC_PCIECTRL_CTRL7_ADDR, val);
> +
> + /* output, pull down */
> + regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
> + val &= ~(0x3 << 2);
> + val |= (0x1 << 1);
> + val &= ~(0x1 << 0);
> + regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
> +
> + /* Handle phy_reset and lane0_reset to HW */
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL1_ADDR);
> + val |= PCIEPHY_RESET_BIT;
> + val &= ~PCIEPHY_PIPE_LINE0_RESET_BIT;
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL1_ADDR);
> +
> + /* fix chip bug: TxDetectRx fail */
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL38_ADDR);
> + val |= (0x1 << 2);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL38_ADDR);
> +}
> +
> +static void hi3670_pcie_pll_init(struct hi3670_pcie_phy *phy)
> +{
> + u32 val;
> +
> + /* choose FNPLL */
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL1);
> + val |= (0x1 << 27);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL1);
> +
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
> + val &= 0xF000FFFF;
> + /* fnpll fbdiv = 0xD0 */
> + val |= (0xd0 << 16);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
> +
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL17);
> + val &= 0xFF000000;
> + /* fnpll fracdiv = 0x555555 */
> + val |= (0x555555 << 0);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL17);
> +
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
> + val &= 0xF5FF88FF;
> + /* fnpll dll_en = 0x1 */
> + val |= (0x1 << 27);
> + /* fnpll postdiv1 = 0x5 */
> + val |= (0x5 << 8);
> + /* fnpll postdiv2 = 0x4 */
> + val |= (0x4 << 12);
> + /* fnpll pll_mode = 0x0 */
> + val &= ~(0x1 << 25);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
> +
> + hi3670_apb_phy_writel(phy, 0x20, SOC_PCIEPHY_MMC1PLL_CTRL21);
> +}
> +
> +static int hi3670_pcie_pll_ctrl(struct hi3670_pcie_phy *phy, bool enable)
> +{
> + struct device *dev = phy->dev;
> + u32 val;
> + int time = 200;
> +
> + if (enable) {
> + /* pd = 0 */
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
> + val &= ~(0x1 << 0);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
> +
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
> +
> + /* choose FNPLL */
> + while (!(val & 0x10)) {
> + if (!time) {
> + dev_err(dev, "wait for pll_lock timeout\n");
> + return -1;
> + }
> + time --;
> + udelay(1);
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_STAT0);
> + }
> +
> + /* pciepll_bp = 0 */
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
> + val &= ~(0x1 << 16);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
> +
> + } else {
> + /* pd = 1 */
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL16);
> + val |= (0x1 << 0);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL16);
> +
> + /* pciepll_bp = 1 */
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_MMC1PLL_CTRL20);
> + val |= (0x1 << 16);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_MMC1PLL_CTRL20);
> + }
> +
> + return 0;
> +}
> +
> +static void hi3670_pcie_hp_debounce_gt(struct hi3670_pcie_phy *phy, bool open)
> +{
> + if (open)
> + /* gt_clk_pcie_hp/gt_clk_pcie_debounce open */
> + regmap_write(phy->crgctrl, CRGPERIPH_PEREN12, 0x9000);
> + else
> + /* gt_clk_pcie_hp/gt_clk_pcie_debounce close */
> + regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x9000);
> +}
> +
> +static void hi3670_pcie_phyref_gt(struct hi3670_pcie_phy *phy, bool open)
> +{
> + unsigned int val;
> +
> + regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
> +
> + if (open)
> + val &= ~(0x1 << 1); //enable hard gt mode
> + else
> + val |= (0x1 << 1); //disable hard gt mode
> +
> + regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
> +
> + /* disable soft gt mode */
> + regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x4000);
> +}
> +
> +static void hi3670_pcie_oe_ctrl(struct hi3670_pcie_phy *phy, bool en_flag)
> +{
> + unsigned int val;
> +
> + regmap_read(phy->crgctrl , CRGPERIPH_PCIECTRL0, &val);
> +
> + /* set ie cfg */
> + val |= IO_IE_EN_HARD_BYPASS;
> +
> + /* set oe cfg */
> + val &= ~IO_HARD_CTRL_DEBOUNCE_BYPASS;
> +
> + /* set phy_debounce in&out time */
> + val |= (DEBOUNCE_WAITCFG_IN | DEBOUNCE_WAITCFG_OUT);
> +
> + /* select oe_gt_mode */
> + val |= IO_OE_GT_MODE;
> +
> + if (en_flag)
> + val &= ~IO_OE_EN_HARD_BYPASS;
> + else
> + val |= IO_OE_EN_HARD_BYPASS;
> +
> + regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
> +}
> +
> +static void hi3670_pcie_ioref_gt(struct hi3670_pcie_phy *phy, bool open)
> +{
> + unsigned int val;
> +
> + if (open) {
> + regmap_write(phy->apb, SOC_PCIECTRL_CTRL21_ADDR, 0x20000070);
> +
> + hi3670_pcie_oe_ctrl(phy, true);
> +
> + /* en hard gt mode */
> + regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
> + val &= ~(0x1 << 0);
> + regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
> +
> + /* disable soft gt mode */
> + regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x2000);
> +
> + } else {
> + /* disable hard gt mode */
> + regmap_read(phy->crgctrl, CRGPERIPH_PCIECTRL0, &val);
> + val |= (0x1 << 0);
> + regmap_write(phy->crgctrl, CRGPERIPH_PCIECTRL0, val);
> +
> + /* disable soft gt mode */
> + regmap_write(phy->crgctrl, CRGPERIPH_PERDIS12, 0x2000);
> +
> + hi3670_pcie_oe_ctrl(phy, false);
> + }
> +}
> +
> +static int hi3670_pcie_allclk_ctrl(struct hi3670_pcie_phy *phy, bool clk_on)
> +{
> + struct device *dev = phy->dev;
> + u32 val;
> + int ret = 0;
> +
> + if (!clk_on)
> + goto close_clocks;
> +
> + /* choose 100MHz clk src: Bit[8]==1 pad, Bit[8]==0 pll */
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL1_ADDR);
> + val &= ~(0x1 << 8);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL1_ADDR);
> +
> + hi3670_pcie_pll_init(phy);
> +
> + ret = hi3670_pcie_pll_ctrl(phy, true);
> + if (ret) {
> + dev_err(dev, "Failed to enable pll\n");
> + return -1;
> + }
> + hi3670_pcie_hp_debounce_gt(phy, true);
> + hi3670_pcie_phyref_gt(phy, true);
> + hi3670_pcie_ioref_gt(phy, true);
> +
> + ret = clk_set_rate(phy->pcie_aclk, AXI_CLK_FREQ);
> + if (ret) {
> + dev_err(dev, "Failed to set rate\n");
> + goto close_clocks;
> + }
> +
> + return 0;
> +
> +close_clocks:
> + hi3670_pcie_ioref_gt(phy, false);
> + hi3670_pcie_phyref_gt(phy, false);
> + hi3670_pcie_hp_debounce_gt(phy, false);
> +
> + hi3670_pcie_pll_ctrl(phy, false);
> +
> + return ret;
> +}
> +
> +static bool is_pipe_clk_stable(struct hi3670_pcie_phy *phy)
> +{
> + struct device *dev = phy->dev;
> + u32 val;
> + u32 time = 100;
> + u32 pipe_clk_stable = 0x1 << 19;
> +
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
> + while (val & pipe_clk_stable) {
> + mdelay(1);
> + if (time == 0) {
> + dev_err(dev, "PIPE clk is not stable\n");
> + return false;
> + }
> + time--;
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_STATE0_ADDR);
> + }
> +
> + return true;
> +}
> +
> +static int hi3670_pcie_noc_power(struct hi3670_pcie_phy *phy, bool enable)
> +{
> + struct device *dev = phy->dev;
> + u32 time = 100;
> + unsigned int val = NOC_PW_MASK;
> + int rst;
> +
> + if (enable)
> + val = NOC_PW_MASK | NOC_PW_SET_BIT;
> + else
> + val = NOC_PW_MASK;
> + rst = enable ? 1 : 0;
> +
> + regmap_write(phy->pmctrl, NOC_POWER_IDLEREQ_1, val);
> +
> + time = 100;
> + regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
> + while((val & NOC_PW_SET_BIT) != rst) {
> + udelay(10);
> + if (!time) {
> + dev_err(dev, "Failed to reverse noc power-status\n");
> + return -1;
> + }
> + time--;
> + regmap_read(phy->pmctrl, NOC_POWER_IDLE_1, &val);
> + }
> +
> + return 0;
> +}
> +
> +static int hi3670_pcie_get_apb(struct hi3670_pcie_phy *phy)
> +{
> + struct device_node *pcie_port;
> + struct device *dev = phy->dev;
> + struct device *pcie_dev;
> +
> + pcie_port = of_get_child_by_name(dev->parent->of_node, "pcie");
> + if (!pcie_port) {
> + dev_err(dev, "no pcie node found in %s\n",
> + dev->parent->of_node->full_name);
> + return -ENODEV;
> + }
> +
> + pcie_dev = bus_find_device_by_of_node(&platform_bus_type, pcie_port);
> + if (!pcie_dev) {
> + dev_err(dev, "Didn't find pcie device\n");
> + return -ENODEV;
> + }
> +
> + /*
> + * We might just use NULL instead of the APB name, as the
> + * pcie-kirin currently registers directly just one regmap (although
> + * the DWC driver register other regmaps).
> + *
> + * Yet, it sounds safer to warrant that it will be accessing the
> + * right regmap. So, let's use the named version.
> + */
> + phy->apb = dev_get_regmap(pcie_dev, "kirin_pcie_apb");
> + if (!phy->apb) {
> + dev_err(dev, "Failed to get APB regmap\n");
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> +
> +static int kirin_pcie_clk_ctrl(struct hi3670_pcie_phy *phy, bool enable)
> +{
> + int ret = 0;
> +
> + if (!enable)
> + goto close_clk;
> +
> + ret = clk_set_rate(phy->phy_ref_clk, REF_CLK_FREQ);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(phy->phy_ref_clk);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(phy->apb_sys_clk);
> + if (ret)
> + goto apb_sys_fail;
> +
> + ret = clk_prepare_enable(phy->apb_phy_clk);
> + if (ret)
> + goto apb_phy_fail;
> +
> + ret = clk_prepare_enable(phy->pcie_aclk);
> + if (ret)
> + goto aclk_fail;
> +
> + ret = clk_prepare_enable(phy->pcie_aux_clk);
> + if (ret)
> + goto aux_clk_fail;
> +
> + return 0;
> +
> +close_clk:
> + clk_disable_unprepare(phy->pcie_aux_clk);
> +aux_clk_fail:
> + clk_disable_unprepare(phy->pcie_aclk);
> +aclk_fail:
> + clk_disable_unprepare(phy->apb_phy_clk);
> +apb_phy_fail:
> + clk_disable_unprepare(phy->apb_sys_clk);
> +apb_sys_fail:
> + clk_disable_unprepare(phy->phy_ref_clk);
> +
> + return ret;
> +}
> +
> +static int hi3670_pcie_phy_init(struct phy *generic_phy)
> +{
> + struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
> + struct device *dev = phy->dev;
> + int ret;
> +
> + /*
> + * The code under hi3670_pcie_get_apb() need to access the
> + * DWC APB registers. So, get them from
> + * the pcie driver's regmap (see pcie-kirin regmap).
> + *
> + * Such kind of resource can only be obtained during the PCIe
> + * power_on sequence, as the code inside pcie-kirin needs to
> + * be already probed, as it needs to register the APB regmap.
> + */
> +
> + ret = hi3670_pcie_get_apb(phy);
> + if (ret)
> + return ret;
> +
> + /* phy regulator needs to be powered on before calling it */
> + return hi3670_pcie_gpio_request(phy, dev);
> +}
> +
> +static int hi3670_pcie_phy_power_on(struct phy *generic_phy)
> +{
> + struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
> + int val, ret, i;
> +
> + /* Power supply for Host */
> + regmap_write(phy->sysctrl,
> + SCTRL_PCIE_CMOS_OFFSET, SCTRL_PCIE_CMOS_BIT);
> + usleep_range(TIME_CMOS_MIN, TIME_CMOS_MAX);
> +
> + hi3670_pcie_phy_oe_enable(phy);
> +
> + for (i = 0; i < phy->n_gpio_clkreq; i++) {
> + ret = gpio_direction_output(phy->gpio_id_clkreq[i], 0);
> + if (ret)
> + return ret;
> + }
> +
> + ret = kirin_pcie_clk_ctrl(phy, true);
> + if (ret)
> + return ret;
> +
> + /* ISO disable, PCIeCtrl, PHY assert and clk gate clear */
> + regmap_write(phy->sysctrl,
> + SCTRL_PCIE_ISO_OFFSET, SCTRL_PCIE_ISO_BIT);
> + regmap_write(phy->crgctrl,
> + CRGCTRL_PCIE_ASSERT_OFFSET, CRGCTRL_PCIE_ASSERT_BIT);
> + regmap_write(phy->sysctrl,
> + SCTRL_PCIE_HPCLK_OFFSET, SCTRL_PCIE_HPCLK_BIT);
> +
> + hi3670_pcie_natural_cfg(phy);
> +
> + ret = hi3670_pcie_allclk_ctrl(phy, true);
> + if (ret)
> + goto disable_clks;
> +
> + /* pull down phy_test_powerdown signal */
> + val = hi3670_apb_phy_readl(phy, SOC_PCIEPHY_CTRL0_ADDR);
> + val &= ~(0x1 << 22);
> + hi3670_apb_phy_writel(phy, val, SOC_PCIEPHY_CTRL0_ADDR);
> +
> + /* deassert controller perst_n */
> + regmap_read(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, &val);
> + val |= (0x1 << 2);
> + regmap_write(phy->apb, SOC_PCIECTRL_CTRL12_ADDR, val);
> + udelay(10);
> +
> + /* perst assert Endpoints */
> + usleep_range(21000, 23000);
> + for (i = 0; i < phy->n_gpio_resets; i++) {
> + ret = gpio_direction_output(phy->gpio_id_reset[i], 1);
> + if (ret)
> + return ret;
> + }
> + usleep_range(10000, 11000);
> +
> + ret = is_pipe_clk_stable(phy);
> + if (!ret)
> + goto disable_clks;
> +
> + hi3670_pcie_set_eyeparam(phy);
> +
> + ret = hi3670_pcie_noc_power(phy, false);
> + if (ret)
> + goto disable_clks;
> +
> + return 0;
> +
> +disable_clks:
> + kirin_pcie_clk_ctrl(phy, false);
> + return ret;
> +}
> +
> +static int hi3670_pcie_phy_power_off(struct phy *generic_phy)
> +{
> + struct hi3670_pcie_phy *phy = phy_get_drvdata(generic_phy);
> +
> + /* Drop power supply for Host */
> + regmap_write(phy->sysctrl, SCTRL_PCIE_CMOS_OFFSET, 0x00);
> +
> + kirin_pcie_clk_ctrl(phy, false);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops hi3670_phy_ops = {
> + .init = hi3670_pcie_phy_init,
> + .power_on = hi3670_pcie_phy_power_on,
> + .power_off = hi3670_pcie_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int hi3670_pcie_phy_get_resources(struct hi3670_pcie_phy *phy,
> + struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + char name[32];
> + int i;
> +
> + /* syscon */
> + phy->crgctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-crgctrl");
> + if (IS_ERR(phy->crgctrl))
> + return PTR_ERR(phy->crgctrl);
> +
> + phy->sysctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-sctrl");
> + if (IS_ERR(phy->sysctrl))
> + return PTR_ERR(phy->sysctrl);
> +
> + phy->pmctrl = syscon_regmap_lookup_by_compatible("hisilicon,hi3670-pmctrl");
> + if (IS_ERR(phy->sysctrl))
> + return PTR_ERR(phy->sysctrl);
> +
> + /* clocks */
> + phy->phy_ref_clk = devm_clk_get(dev, "pcie_phy_ref");
> + if (IS_ERR(phy->phy_ref_clk))
> + return PTR_ERR(phy->phy_ref_clk);
> +
> + phy->pcie_aux_clk = devm_clk_get(dev, "pcie_aux");
> + if (IS_ERR(phy->pcie_aux_clk))
> + return PTR_ERR(phy->pcie_aux_clk);
> +
> + phy->apb_phy_clk = devm_clk_get(dev, "pcie_apb_phy");
> + if (IS_ERR(phy->apb_phy_clk))
> + return PTR_ERR(phy->apb_phy_clk);
> +
> + phy->apb_sys_clk = devm_clk_get(dev, "pcie_apb_sys");
> + if (IS_ERR(phy->apb_sys_clk))
> + return PTR_ERR(phy->apb_sys_clk);
> +
> + phy->pcie_aclk = devm_clk_get(dev, "pcie_aclk");
> + if (IS_ERR(phy->pcie_aclk))
> + return PTR_ERR(phy->pcie_aclk);
> +
> + /* registers */
> + phy->base = devm_platform_ioremap_resource_byname(pdev, "phy");
> + if (IS_ERR(phy->base))
> + return PTR_ERR(phy->base);
> +
> + /* perst reset gpios */
> + phy->n_gpio_resets = of_gpio_named_count(np, "reset-gpios");
> + if (phy->n_gpio_resets > MAX_GPIO_RESETS) {
> + dev_err(dev, "Too many GPIO resets!\n");
> + return -EINVAL;
> + }
> + for (i = 0; i < phy->n_gpio_resets; i++) {
> + phy->gpio_id_reset[i] = of_get_named_gpio(dev->of_node,
> + "reset-gpios", i);
> + if (phy->gpio_id_reset[i] < 0)
> + return phy->gpio_id_reset[i];
> +
> + sprintf(name, "pcie_perst_%d", i);
> +
> + phy->reset_names[i] = devm_kstrdup_const(dev, name,
> + GFP_KERNEL);
> + if (!phy->reset_names[i])
> + return -ENOMEM;
> + }
> +
> + /* clock request gpios */
> + phy->n_gpio_clkreq = of_gpio_named_count(np, "clkreq-gpios");
> + if (phy->n_gpio_clkreq > MAX_GPIO_CLKREQ) {
> + dev_err(dev, "Too many GPIO clock requests!\n");
> + return -EINVAL;
> + }
> + for (i = 0; i < phy->n_gpio_clkreq; i++) {
> + phy->gpio_id_clkreq[i] = of_get_named_gpio(dev->of_node,
> + "clkreq-gpios", i);
> + if (phy->gpio_id_clkreq[i] < 0)
> + return phy->gpio_id_clkreq[i];
> +
> + sprintf(name, "pcie_clkreq_%d", i);
> + phy->clkreq_names[i] = devm_kstrdup_const(dev, name,
> + GFP_KERNEL);
> + if (!phy->clkreq_names[i])
> + return -ENOMEM;
> + }
> +
> + hi3670_pcie_get_eyeparam(phy);
> +
> + return 0;
> +}
> +
> +static int hi3670_pcie_phy_probe(struct platform_device *pdev)
> +{
> + struct phy_provider *phy_provider;
> + struct device *dev = &pdev->dev;
> + struct hi3670_pcie_phy *phy;
> + struct phy *generic_phy;
> + int ret;
> +
> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy)
> + return -ENOMEM;
> +
> + phy->dev = dev;
> +
> + ret = hi3670_pcie_phy_get_resources(phy, pdev);
> + if (ret)
> + return ret;
> +
> + generic_phy = devm_phy_create(dev, dev->of_node, &hi3670_phy_ops);
> + if (IS_ERR(generic_phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(generic_phy);
> + }
> +
> + phy_set_drvdata(generic_phy, phy);
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id hi3670_pcie_phy_match[] = {
> + {
> + .compatible = "hisilicon,hi970-pcie-phy",
> + },
> + {},
> +};
> +
> +static struct platform_driver hi3670_pcie_phy_driver = {
> + .probe = hi3670_pcie_phy_probe,
> + .driver = {
> + .of_match_table = hi3670_pcie_phy_match,
> + .name = "hi3670_pcie_phy",
> + .suppress_bind_attrs = true,
> + }
> +};
> +builtin_platform_driver(hi3670_pcie_phy_driver);
> --
> 2.31.1
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v3 9/9] arm64: dts: hisilicon: Add support for HiKey 970 PCIe controller hardware
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
` (7 preceding siblings ...)
2021-07-09 10:41 ` [PATCH v3 8/9] phy: hisilicon: add driver for Kirin 970 PCIe PHY Mauro Carvalho Chehab
@ 2021-07-09 10:41 ` Mauro Carvalho Chehab
2021-07-12 8:19 ` [PATCH v3 0/9] Add support for Hikey 970 PCIe Manivannan Sadhasivam
2021-07-12 16:52 ` Bjorn Helgaas
10 siblings, 0 replies; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-09 10:41 UTC (permalink / raw)
To: Manivannan Sadhasivam, Rob Herring
Cc: linuxarm, mauro.chehab, Manivannan Sadhasivam, Rob Herring,
Wei Xu, devicetree, linux-arm-kernel, linux-kernel,
Mauro Carvalho Chehab
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add DTS bindings for the Hikey 970 board's PCIe hardware.
Co-developed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 72 +++++++++++++++++++
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 1 -
2 files changed, 72 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 6476149d99e3..f54dab70f01b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -177,6 +177,12 @@ sctrl: sctrl@fff0a000 {
#clock-cells = <1>;
};
+ pmctrl: pmctrl@fff31000 {
+ compatible = "hisilicon,hi3670-pmctrl", "syscon";
+ reg = <0x0 0xfff31000 0x0 0x1000>;
+ #clock-cells = <1>;
+ };
+
iomcu: iomcu@ffd7e000 {
compatible = "hisilicon,hi3670-iomcu", "syscon";
reg = <0x0 0xffd7e000 0x0 0x1000>;
@@ -660,6 +666,72 @@ gpio28: gpio@fff1d000 {
clock-names = "apb_pclk";
};
+ its_pcie: interrupt-controller@f4000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0xf5100000 0x0 0x100000>;
+ };
+
+ pcie_phy: pcie-phy@fc000000 {
+ compatible = "hisilicon,hi970-pcie-phy";
+ reg = <0x0 0xfc000000 0x0 0x80000>;
+ reg-names = "phy";
+
+ phy-supply = <&ldo33>;
+
+ clocks = <&crg_ctrl HI3670_CLK_GATE_PCIEPHY_REF>,
+ <&crg_ctrl HI3670_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3670_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3670_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3670_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux",
+ "pcie_apb_phy", "pcie_apb_sys",
+ "pcie_aclk";
+
+ reset-gpios = <&gpio7 0 0 >, <&gpio25 2 0 >,
+ <&gpio3 1 0 >, <&gpio27 4 0 >;
+
+ clkreq-gpios = <&gpio20 6 0 >, <&gpio27 3 0 >,
+ <&gpio17 0 0 >;
+
+ /* vboost iboost pre post main */
+ hisilicon,eye-diagram-param = <0xFFFFFFFF 0xFFFFFFFF
+ 0xFFFFFFFF 0xFFFFFFFF
+ 0xFFFFFFFF>;
+
+ #phy-cells = <0>;
+ };
+
+ pcie@f4000000 {
+ compatible = "hisilicon,kirin970-pcie";
+ reg = <0x0 0xf4000000 0x0 0x1000000>,
+ <0x0 0xfc180000 0x0 0x1000>,
+ <0x0 0xf5000000 0x0 0x2000>;
+ reg-names = "dbi", "apb", "config";
+ bus-range = <0x0 0x1>;
+ msi-parent = <&its_pcie>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ phys = <&pcie_phy>;
+ ranges = <0x02000000 0x0 0x00000000
+ 0x0 0xf6000000
+ 0x0 0x02000000>;
+ num-lanes = <1>;
+ #interrupt-cells = <1>;
+ interrupts = <0 283 4>;
+ interrupt-names = "msi";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0x0 0 0 1
+ &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 2
+ &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 3
+ &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 4
+ &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
/* UFS */
ufs: ufs@ff3c0000 {
compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
index 48c739eacba0..03452e627641 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -73,7 +73,6 @@ ldo33: LDO33 { /* PEX8606 */
regulator-name = "ldo33";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3300000>;
- regulator-boot-on;
};
ldo34: LDO34 { /* GPS AUX IN VDD */
--
2.31.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v3 0/9] Add support for Hikey 970 PCIe
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
` (8 preceding siblings ...)
2021-07-09 10:41 ` [PATCH v3 9/9] arm64: dts: hisilicon: Add support for HiKey 970 PCIe controller hardware Mauro Carvalho Chehab
@ 2021-07-12 8:19 ` Manivannan Sadhasivam
2021-07-12 21:49 ` Mauro Carvalho Chehab
2021-07-12 16:52 ` Bjorn Helgaas
10 siblings, 1 reply; 15+ messages in thread
From: Manivannan Sadhasivam @ 2021-07-12 8:19 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Rob Herring, linuxarm, mauro.chehab, Krzysztof Wilczyński,
Binghui Wang, Rob Herring, Xiaowei Song, devicetree,
linux-arm-kernel, linux-kernel, linux-pci, linux-phy
Hi Mauro,
On Fri, Jul 09, 2021 at 12:41:36PM +0200, Mauro Carvalho Chehab wrote:
> As requested by Rob Herring, this series split the PHY part into a separate driver.
> Then, it adds support for Kirin 970 on a single patch.
>
> With this change, the PHY-specific device tree bindings for Kirin 960 moved
> to its own PHY properties.
>
> Manivannan,
>
> Please notice that the last two patches are marked as co-developed:
>
> phy: hisilicon: add driver for Kirin 970 PCIe PHY
> arm64: dts: hisilicon: Add support for HiKey 970 PCIe controller hardware
>
> The first one contains the code you submitted in the past adding
> support for Kirin 970 at the pcie-kirin driver, modified by me and
> moved to a separate driver.
>
> The second one is the DTS file, also modified by me in order to split the PHY
> properties from the PCIe ones.
>
> Please send your SoB to confirm that both changes are OK for you.
>
I'm fine with the changes. The dts patch already has my s-o-b as you
preserved my authorship and I've sent my s-o-b for the driver patch.
I used my korg address for the driver patch but that's fine as all these
efforts were done in my spare time.
Thanks,
Mani
> Tested on Hikey970:
>
> $ lspci
> 00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01)
> 01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
>
> $ ethtool enp6s0
> Settings for enp6s0:
> Supported ports: [ TP MII ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Supported pause frame use: Symmetric Receive-only
> Supports auto-negotiation: Yes
> Supported FEC modes: Not reported
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Advertised pause frame use: Symmetric Receive-only
> Advertised auto-negotiation: Yes
> Advertised FEC modes: Not reported
> Link partner advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> Link partner advertised pause frame use: Symmetric Receive-only
> Link partner advertised auto-negotiation: Yes
> Link partner advertised FEC modes: Not reported
> Speed: 100Mb/s
> Duplex: Full
> Auto-negotiation: on
> master-slave cfg: preferred slave
> master-slave status: slave
> Port: Twisted Pair
> PHYAD: 0
> Transceiver: external
> MDI-X: Unknown
> netlink error: Operation not permitted
> Link detected: yes
>
> Partially tested on Hikey 960[1]:
>
> $ lspci
> 00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01)
>
> [1] The Hikey 960 doesn't come with any internal PCIe device.
> Its hardware supports just an external device via a M.2 slot that
> doesn't support SATA. I ordered a NVMe device to test, but the vendor
> is currently out of supply. It should take 4-5 weeks to arrive here. I'll
> run an extra test on it once it arrives.
>
> Manivannan Sadhasivam (1):
> arm64: dts: hisilicon: Add support for HiKey 970 PCIe controller
> hardware
>
> Mauro Carvalho Chehab (8):
> dt-bindings: phy: add bindings for Hikey 960 PCIe PHY
> dt-bindings: phy: add bindings for Hikey 970 PCIe PHY
> dt-bindings: PCI: kirin: fix compatible string
> dt-bindings: PCI: kirin: drop PHY properties
> phy: hisilicon: add a PHY driver for Kirin 960
> PCI: kirin: drop the PHY logic from the driver
> PCI: kirin: use regmap for APB registers
> phy: hisilicon: add driver for Kirin 970 PCIe PHY
>
> .../devicetree/bindings/pci/kirin-pcie.txt | 21 +-
> .../phy/hisilicon,phy-hi3660-pcie.yaml | 82 ++
> .../phy/hisilicon,phy-hi3670-pcie.yaml | 101 ++
> arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 29 +-
> arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 72 ++
> .../boot/dts/hisilicon/hikey970-pmic.dtsi | 1 -
> drivers/pci/controller/dwc/pcie-kirin.c | 298 ++----
> drivers/phy/hisilicon/Kconfig | 20 +
> drivers/phy/hisilicon/Makefile | 2 +
> drivers/phy/hisilicon/phy-hi3660-pcie.c | 325 +++++++
> drivers/phy/hisilicon/phy-hi3670-pcie.c | 892 ++++++++++++++++++
> 11 files changed, 1572 insertions(+), 271 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3660-pcie.yaml
> create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
> create mode 100644 drivers/phy/hisilicon/phy-hi3660-pcie.c
> create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c
>
> --
> 2.31.1
>
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 0/9] Add support for Hikey 970 PCIe
2021-07-12 8:19 ` [PATCH v3 0/9] Add support for Hikey 970 PCIe Manivannan Sadhasivam
@ 2021-07-12 21:49 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-12 21:49 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: Rob Herring, linuxarm, mauro.chehab, Krzysztof Wilczyński,
Binghui Wang, Rob Herring, Xiaowei Song, devicetree,
linux-arm-kernel, linux-kernel, linux-pci, linux-phy
Em Mon, 12 Jul 2021 13:49:44 +0530
Manivannan Sadhasivam <mani@kernel.org> escreveu:
> Hi Mauro,
>
> On Fri, Jul 09, 2021 at 12:41:36PM +0200, Mauro Carvalho Chehab wrote:
> > As requested by Rob Herring, this series split the PHY part into a separate driver.
> > Then, it adds support for Kirin 970 on a single patch.
> >
> > With this change, the PHY-specific device tree bindings for Kirin 960 moved
> > to its own PHY properties.
> >
> > Manivannan,
> >
> > Please notice that the last two patches are marked as co-developed:
> >
> > phy: hisilicon: add driver for Kirin 970 PCIe PHY
> > arm64: dts: hisilicon: Add support for HiKey 970 PCIe controller hardware
> >
> > The first one contains the code you submitted in the past adding
> > support for Kirin 970 at the pcie-kirin driver, modified by me and
> > moved to a separate driver.
> >
> > The second one is the DTS file, also modified by me in order to split the PHY
> > properties from the PCIe ones.
> >
> > Please send your SoB to confirm that both changes are OK for you.
> >
>
> I'm fine with the changes. The dts patch already has my s-o-b as you
> preserved my authorship and I've sent my s-o-b for the driver patch.
> I used my korg address for the driver patch but that's fine as all these
> efforts were done in my spare time.
Thank you! Sent v4 with your SoB at the driver part. I'll submit
your DTS patch later on, as it depends on a patch adding DT for HiKey 970
PMIC, that should be merged via another tree.
Regards,
Mauro
>
> Thanks,
> Mani
>
> > Tested on Hikey970:
> >
> > $ lspci
> > 00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01)
> > 01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> > 02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> > 02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> > 02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> > 02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> > 02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
> > 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)
> >
> > $ ethtool enp6s0
> > Settings for enp6s0:
> > Supported ports: [ TP MII ]
> > Supported link modes: 10baseT/Half 10baseT/Full
> > 100baseT/Half 100baseT/Full
> > 1000baseT/Half 1000baseT/Full
> > Supported pause frame use: Symmetric Receive-only
> > Supports auto-negotiation: Yes
> > Supported FEC modes: Not reported
> > Advertised link modes: 10baseT/Half 10baseT/Full
> > 100baseT/Half 100baseT/Full
> > 1000baseT/Half 1000baseT/Full
> > Advertised pause frame use: Symmetric Receive-only
> > Advertised auto-negotiation: Yes
> > Advertised FEC modes: Not reported
> > Link partner advertised link modes: 10baseT/Half 10baseT/Full
> > 100baseT/Half 100baseT/Full
> > Link partner advertised pause frame use: Symmetric Receive-only
> > Link partner advertised auto-negotiation: Yes
> > Link partner advertised FEC modes: Not reported
> > Speed: 100Mb/s
> > Duplex: Full
> > Auto-negotiation: on
> > master-slave cfg: preferred slave
> > master-slave status: slave
> > Port: Twisted Pair
> > PHYAD: 0
> > Transceiver: external
> > MDI-X: Unknown
> > netlink error: Operation not permitted
> > Link detected: yes
> >
> > Partially tested on Hikey 960[1]:
> >
> > $ lspci
> > 00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01)
> >
> > [1] The Hikey 960 doesn't come with any internal PCIe device.
> > Its hardware supports just an external device via a M.2 slot that
> > doesn't support SATA. I ordered a NVMe device to test, but the vendor
> > is currently out of supply. It should take 4-5 weeks to arrive here. I'll
> > run an extra test on it once it arrives.
> >
> > Manivannan Sadhasivam (1):
> > arm64: dts: hisilicon: Add support for HiKey 970 PCIe controller
> > hardware
> >
> > Mauro Carvalho Chehab (8):
> > dt-bindings: phy: add bindings for Hikey 960 PCIe PHY
> > dt-bindings: phy: add bindings for Hikey 970 PCIe PHY
> > dt-bindings: PCI: kirin: fix compatible string
> > dt-bindings: PCI: kirin: drop PHY properties
> > phy: hisilicon: add a PHY driver for Kirin 960
> > PCI: kirin: drop the PHY logic from the driver
> > PCI: kirin: use regmap for APB registers
> > phy: hisilicon: add driver for Kirin 970 PCIe PHY
> >
> > .../devicetree/bindings/pci/kirin-pcie.txt | 21 +-
> > .../phy/hisilicon,phy-hi3660-pcie.yaml | 82 ++
> > .../phy/hisilicon,phy-hi3670-pcie.yaml | 101 ++
> > arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 29 +-
> > arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 72 ++
> > .../boot/dts/hisilicon/hikey970-pmic.dtsi | 1 -
> > drivers/pci/controller/dwc/pcie-kirin.c | 298 ++----
> > drivers/phy/hisilicon/Kconfig | 20 +
> > drivers/phy/hisilicon/Makefile | 2 +
> > drivers/phy/hisilicon/phy-hi3660-pcie.c | 325 +++++++
> > drivers/phy/hisilicon/phy-hi3670-pcie.c | 892 ++++++++++++++++++
> > 11 files changed, 1572 insertions(+), 271 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3660-pcie.yaml
> > create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
> > create mode 100644 drivers/phy/hisilicon/phy-hi3660-pcie.c
> > create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c
> >
> > --
> > 2.31.1
> >
> >
Thanks,
Mauro
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 0/9] Add support for Hikey 970 PCIe
2021-07-09 10:41 [PATCH v3 0/9] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
` (9 preceding siblings ...)
2021-07-12 8:19 ` [PATCH v3 0/9] Add support for Hikey 970 PCIe Manivannan Sadhasivam
@ 2021-07-12 16:52 ` Bjorn Helgaas
2021-07-12 21:11 ` Mauro Carvalho Chehab
10 siblings, 1 reply; 15+ messages in thread
From: Bjorn Helgaas @ 2021-07-12 16:52 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Manivannan Sadhasivam, Rob Herring, linuxarm, mauro.chehab,
Krzysztof Wilczyński, Binghui Wang, Rob Herring,
Xiaowei Song, devicetree, linux-arm-kernel, linux-kernel,
linux-pci, linux-phy
On Fri, Jul 09, 2021 at 12:41:36PM +0200, Mauro Carvalho Chehab wrote:
> ...
> Manivannan Sadhasivam (1):
> arm64: dts: hisilicon: Add support for HiKey 970 PCIe controller
> hardware
FWIW, this didn't apply cleanly for me to v5.14-rc1.
> Mauro Carvalho Chehab (8):
> dt-bindings: phy: add bindings for Hikey 960 PCIe PHY
> dt-bindings: phy: add bindings for Hikey 970 PCIe PHY
> dt-bindings: PCI: kirin: fix compatible string
> dt-bindings: PCI: kirin: drop PHY properties
> phy: hisilicon: add a PHY driver for Kirin 960
> PCI: kirin: drop the PHY logic from the driver
> PCI: kirin: use regmap for APB registers
If/when you repost this, please update these subject lines to match the
historical style:
PCI: kirin: Drop PHY logic from the driver
PCI: kirin: Use regmap for APB registers
Also, please update subject lines, commit logs, Kconfig menu and help
text, comments, etc throughout to capitalize "HiKey" and "HiSilicon"
as the vendor does.
> phy: hisilicon: add driver for Kirin 970 PCIe PHY
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v3 0/9] Add support for Hikey 970 PCIe
2021-07-12 16:52 ` Bjorn Helgaas
@ 2021-07-12 21:11 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 15+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-12 21:11 UTC (permalink / raw)
To: Bjorn Helgaas
Cc: Manivannan Sadhasivam, Rob Herring, linuxarm, mauro.chehab,
Krzysztof Wilczyński, Binghui Wang, Rob Herring,
Xiaowei Song, devicetree, linux-arm-kernel, linux-kernel,
linux-pci, linux-phy
Hi Bjorn,
Em Mon, 12 Jul 2021 11:52:21 -0500
Bjorn Helgaas <helgaas@kernel.org> escreveu:
> On Fri, Jul 09, 2021 at 12:41:36PM +0200, Mauro Carvalho Chehab wrote:
> > ...
> > Manivannan Sadhasivam (1):
> > arm64: dts: hisilicon: Add support for HiKey 970 PCIe controller
> > hardware
>
> FWIW, this didn't apply cleanly for me to v5.14-rc1.
True. The last patch of this series:
dts: HiSilicon: Add support for HiKey 970 PCIe controller hardware
Depends on a patch that should be merged via another tree:
https://lore.kernel.org/lkml/db5b33e4d0b239a7377e123b46f63b5640329021.1625477735.git.mchehab+huawei@kernel.org/
Such patch adds the DTS data required for the PMIC.
I guess I'll submit the series without this one. Once both series
get merged, I'll submit it in separate.
>
> > Mauro Carvalho Chehab (8):
> > dt-bindings: phy: add bindings for Hikey 960 PCIe PHY
> > dt-bindings: phy: add bindings for Hikey 970 PCIe PHY
> > dt-bindings: PCI: kirin: fix compatible string
> > dt-bindings: PCI: kirin: drop PHY properties
> > phy: hisilicon: add a PHY driver for Kirin 960
>
> > PCI: kirin: drop the PHY logic from the driver
> > PCI: kirin: use regmap for APB registers
>
> If/when you repost this, please update these subject lines to match the
> historical style:
>
> PCI: kirin: Drop PHY logic from the driver
> PCI: kirin: Use regmap for APB registers
>
> Also, please update subject lines, commit logs, Kconfig menu and help
> text, comments, etc throughout to capitalize "HiKey" and "HiSilicon"
> as the vendor does.
Ok.
>
> > phy: hisilicon: add driver for Kirin 970 PCIe PHY
Thanks,
Mauro
^ permalink raw reply [flat|nested] 15+ messages in thread