From: Gert Vervoort <gert.vervoort@hccnet.nl>
To: Patrick Mansfield <patmans@us.ibm.com>
Cc: tconnors@astro.swin.edu.au, Robert Love <rml@tech9.net>,
linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: Re: [PATCH] Re: 2.5.67: ppa driver & preempt == oops
Date: Wed, 16 Apr 2003 19:52:15 +0200 [thread overview]
Message-ID: <3E9D984F.20402@hccnet.nl> (raw)
In-Reply-To: 20030415144051.A31514@beaverton.ibm.com
>
>
>
>Can you capture output for the mount with scsi logging on?
>
>It may or may not help track down what is happening.
>
>If you haven't done much scsi, some scsi logging info:
>
>Check that your .config has CONFIG_SCSI_LOGGING on.
>
>Then do something like:
>
>sync
>sync
>echo scsi log all > /proc/scsi/scsi
>mount /dev/sdw1 /mnt/sdw1
>
>
scsi logging level set to 0xffffffff
sd_open: disk=sda
scsi_block_when_processing_errors: rtn: 1
sd_media_changed: disk=sda
scsi_block_when_processing_errors: rtn: 1
scsi_block_when_processing_errors: rtn: 1
Trying ioctl with scsi command 0
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea4060, time: 10000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea40b1, buffer = 00000000,
bufflen = 0, done = c023bb90)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
scsi_delete_timer: scmd: c7ea4060, rtn: 1
Command failed c7ea4060 2 busy=1 failed=0
bh?: old sense key No Sense
Non-extended sense class 0 code 0x0
Waking error handler thread
Error handler scsi_eh_0 waking up
scsi_eh_prt_fail_stats: 0:0:6:0 cmds failed: 1, cancel: 0
Total of 1 commands on 1 devices require eh work
scsi_eh_0: requesting sense for id: 6
scsi_add_timer: scmd: c7ea4060, time: 10000, (c0239f10)
scsi_eh_done scmd: c7ea4060 result: 0
scsi_send_eh_cmnd: scmd: c7ea4060, rtn:2002
scsi_send_eh_cmnd: scsi_eh_completed_normally 2002
sense requested for c7ea4060 result 2
Current bh?: sense key Unit Attention
Additional sense: Not ready to ready change, medium may have changed
scsi_eh_0: flush finish cmd: c7ea4060
Notifying upper driver of completion for device 6 8000002
scsi_restart_operations: waking up host to restart
Error handler scsi_eh_0 sleeping
Ioctl returned 0x8000002
IOCTL Releasing command
sd_init_onedisk: disk=sda
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea4060, time: 30000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea40b1, buffer = c0fffe00,
bufflen = 0, done = c023bb90)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
scsi_delete_timer: scmd: c7ea4060, rtn: 1
Command finished 1 0 0x0
Notifying upper driver of completion for device 6 0
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea4060, time: 30000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea40b1, buffer = c0fffe00,
bufflen = 8, done = c023bb90)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
scsi_delete_timer: scmd: c7ea4060, rtn: 1
Command finished 1 0 0x0
Notifying upper driver of completion for device 6 0
SCSI device sda: 196608 512-byte hdwr sectors (101 MB)
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea4060, time: 30000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea40b1, buffer = c0fffe00,
bufflen = 4, done = c023bb90)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
scsi_delete_timer: scmd: c7ea4060, rtn: 1
Command finished 1 0 0x0
Notifying upper driver of completion for device 6 0
sda: Write Protect is off
sda: Mode Sense: 25 00 00 08
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea4060, time: 30000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea40b1, buffer = c0fffe00,
bufflen = 4, done = c023bb90)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
scsi_delete_timer: scmd: c7ea4060, rtn: 1
Command failed c7ea4060 2 busy=1 failed=0
bh?: old sense key No Sense
Non-extended sense class 0 code 0x0
Waking error handler thread
Error handler scsi_eh_0 waking up
scsi_eh_prt_fail_stats: 0:0:6:0 cmds failed: 1, cancel: 0
Total of 1 commands on 1 devices require eh work
scsi_eh_0: requesting sense for id: 6
scsi_add_timer: scmd: c7ea4060, time: 10000, (c0239f10)
scsi_eh_done scmd: c7ea4060 result: 0
scsi_send_eh_cmnd: scmd: c7ea4060, rtn:2002
scsi_send_eh_cmnd: scsi_eh_completed_normally 2002
sense requested for c7ea4060 result 2
Current bh?: sense key Illegal Request
Additional sense: Invalid field in cdb
scsi_eh_0: flush finish cmd: c7ea4060
Notifying upper driver of completion for device 6 8000002
scsi_restart_operations: waking up host to restart
Error handler scsi_eh_0 sleeping
sda: cache data unavailable
sda: assuming drive cache: write through
scsi_block_when_processing_errors: rtn: 1
Trying ioctl with scsi command 30
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea4060, time: 10000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea40b1, buffer = 00000000,
bufflen = 0, done = c023bb90)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
scsi_delete_timer: scmd: c7ea4060, rtn: 1
Command finished 1 0 0x0
Notifying upper driver of completion for device 6 0
Ioctl returned 0x0
IOCTL Releasing command
sd_init_onedisk: disk=sda
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea4060, time: 30000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea40b1, buffer = c0fffe00,
bufflen = 0, done = c023bb90)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
scsi_delete_timer: scmd: c7ea4060, rtn: 1
Command finished 1 0 0x0
Notifying upper driver of completion for device 6 0
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea4060, time: 30000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea40b1, buffer = c0fffe00,
bufflen = 8, done = c023bb90)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
scsi_delete_timer: scmd: c7ea4060, rtn: 1
Command finished 1 0 0x0
Notifying upper driver of completion for device 6 0
SCSI device sda: 196608 512-byte hdwr sectors (101 MB)
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea4060, time: 30000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea40b1, buffer = c0fffe00,
bufflen = 4, done = c023bb90)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
scsi_delete_timer: scmd: c7ea4060, rtn: 1
Command finished 1 0 0x0
Notifying upper driver of completion for device 6 0
sda: Write Protect is off
sda: Mode Sense: 25 00 00 08
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea4060, time: 30000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea40b1, buffer = c0fffe00,
bufflen = 4, done = c023bb90)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
scsi_delete_timer: scmd: c7ea4060, rtn: 1
Command failed c7ea4060 2 busy=1 failed=0
bh?: old sense key No Sense
Non-extended sense class 0 code 0x0
Waking error handler thread
Error handler scsi_eh_0 waking up
scsi_eh_prt_fail_stats: 0:0:6:0 cmds failed: 1, cancel: 0
Total of 1 commands on 1 devices require eh work
scsi_eh_0: requesting sense for id: 6
scsi_add_timer: scmd: c7ea4060, time: 10000, (c0239f10)
scsi_eh_done scmd: c7ea4060 result: 0
scsi_send_eh_cmnd: scmd: c7ea4060, rtn:2002
scsi_send_eh_cmnd: scsi_eh_completed_normally 2002
sense requested for c7ea4060 result 2
Current bh?: sense key Illegal Request
Additional sense: Invalid field in cdb
scsi_eh_0: flush finish cmd: c7ea4060
Notifying upper driver of completion for device 6 8000002
scsi_restart_operations: waking up host to restart
Leaving scsi_init_cmd_from_req()
scsi_add_timer: scmd: c7ea41a0, time: 10000, (c0239cc0)
scsi_dispatch_cmnd (host = 0, channel = 0, target = 6, command =
c7ea41f1, buffer = 00000000,
bufflen = 0, done = c023b0f0)
queuecommand : routine at c02417a0
leaving scsi_dispatch_cmnd()
Error handler scsi_eh_0 sleeping
sda: cache data unavailable
sda: assuming drive cache: write through
sda:scsi_delete_timer: scmd: c7ea41a0, rtn: 1
Command finished 1 0 0x0
Notifying upper driver of completion for device 6 0
Gert
next prev parent reply other threads:[~2003-04-16 17:39 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-04-12 15:03 2.5.67: ppa driver & preempt == oops Gert Vervoort
2003-04-12 18:28 ` Robert Love
2003-04-13 10:30 ` Gert Vervoort
2003-04-13 17:32 ` Robert Love
2003-04-13 17:44 ` Gert Vervoort
2003-04-15 19:00 ` [PATCH] " Patrick Mansfield
2003-04-15 20:44 ` Gert Vervoort
2003-04-15 21:40 ` Patrick Mansfield
2003-04-16 17:52 ` Gert Vervoort [this message]
2003-04-16 18:05 ` Patrick Mansfield
2003-04-16 19:45 ` Gert Vervoort
2003-04-16 20:07 ` Mike Anderson
2003-04-16 18:03 ` Gert Vervoort
2003-04-15 21:37 ` Robert Love
2003-04-15 21:51 ` Randy.Dunlap
2003-04-15 22:07 ` Patrick Mansfield
2003-04-15 22:29 ` Randy.Dunlap
2003-04-15 22:35 ` Patrick Mansfield
2003-04-12 21:12 ` Andrew Morton
2003-04-13 11:45 ` Gert Vervoort
2003-04-13 20:44 ` Andrew Morton
[not found] <fa.chdor2j.u72387@ifi.uio.no>
[not found] ` <fa.gs8uudl.196640l@ifi.uio.no>
2003-04-15 23:04 ` [PATCH] " walt
2003-04-15 23:25 ` Patrick Mansfield
2003-04-16 3:30 ` walt
[not found] <fa.hdvi4hc.152sj34@ifi.uio.no>
[not found] ` <fa.fnhqqrs.ok0028@ifi.uio.no>
2003-04-15 23:51 ` walt
2003-04-16 0:07 ` Randy.Dunlap
[not found] <fa.fo1ils5.o4kt21@ifi.uio.no>
[not found] ` <fa.jt2b7k8.20qj0c@ifi.uio.no>
2003-04-16 3:19 ` walt
2003-04-16 9:45 Chuck Ebbert
[not found] <fa.cde0mrb.127uv05@ifi.uio.no>
[not found] ` <fa.i9on98t.1gg0toj@ifi.uio.no>
2003-04-17 19:37 ` walt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E9D984F.20402@hccnet.nl \
--to=gert.vervoort@hccnet.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=patmans@us.ibm.com \
--cc=rml@tech9.net \
--cc=tconnors@astro.swin.edu.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).