* [PATCH 4.4 01/79] KVM: s390: Test for bad access register and size at the start of S390_MEM_OP
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 02/79] s390/topology: avoid firing events before kobjs are created Greg Kroah-Hartman
` (83 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Huth, Cornelia Huck,
Janosch Frank, David Hildenbrand, Christian Borntraeger
From: Thomas Huth <thuth@redhat.com>
commit a13b03bbb4575b350b46090af4dfd30e735aaed1 upstream.
If the KVM_S390_MEM_OP ioctl is called with an access register >= 16,
then there is certainly a bug in the calling userspace application.
We check for wrong access registers, but only if the vCPU was already
in the access register mode before (i.e. the SIE block has recorded
it). The check is also buried somewhere deep in the calling chain (in
the function ar_translation()), so this is somewhat hard to find.
It's better to always report an error to the userspace in case this
field is set wrong, and it's safer in the KVM code if we block wrong
values here early instead of relying on a check somewhere deep down
the calling chain, so let's add another check to kvm_s390_guest_mem_op()
directly.
We also should check that the "size" is non-zero here (thanks to Janosch
Frank for the hint!). If we do not check the size, we could call vmalloc()
with this 0 value, and this will cause a kernel warning.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/r/20190829122517.31042-1-thuth@redhat.com
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kvm/kvm-s390.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -2471,7 +2471,7 @@ static long kvm_s390_guest_mem_op(struct
const u64 supported_flags = KVM_S390_MEMOP_F_INJECT_EXCEPTION
| KVM_S390_MEMOP_F_CHECK_ONLY;
- if (mop->flags & ~supported_flags)
+ if (mop->flags & ~supported_flags || mop->ar >= NUM_ACRS || !mop->size)
return -EINVAL;
if (mop->size > MEM_OP_MAX_SIZE)
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 02/79] s390/topology: avoid firing events before kobjs are created
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 01/79] KVM: s390: Test for bad access register and size at the start of S390_MEM_OP Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 03/79] s390/cio: avoid calling strlen on null pointer Greg Kroah-Hartman
` (82 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Heiko Carstens, Vasily Gorbik
From: Vasily Gorbik <gor@linux.ibm.com>
commit f3122a79a1b0a113d3aea748e0ec26f2cb2889de upstream.
arch_update_cpu_topology is first called from:
kernel_init_freeable->sched_init_smp->sched_init_domains
even before cpus has been registered in:
kernel_init_freeable->do_one_initcall->s390_smp_init
Do not trigger kobject_uevent change events until cpu devices are
actually created. Fixes the following kasan findings:
BUG: KASAN: global-out-of-bounds in kobject_uevent_env+0xb40/0xee0
Read of size 8 at addr 0000000000000020 by task swapper/0/1
BUG: KASAN: global-out-of-bounds in kobject_uevent_env+0xb36/0xee0
Read of size 8 at addr 0000000000000018 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G B
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
([<0000000143c6db7e>] show_stack+0x14e/0x1a8)
[<0000000145956498>] dump_stack+0x1d0/0x218
[<000000014429fb4c>] print_address_description+0x64/0x380
[<000000014429f630>] __kasan_report+0x138/0x168
[<0000000145960b96>] kobject_uevent_env+0xb36/0xee0
[<0000000143c7c47c>] arch_update_cpu_topology+0x104/0x108
[<0000000143df9e22>] sched_init_domains+0x62/0xe8
[<000000014644c94a>] sched_init_smp+0x3a/0xc0
[<0000000146433a20>] kernel_init_freeable+0x558/0x958
[<000000014599002a>] kernel_init+0x22/0x160
[<00000001459a71d4>] ret_from_fork+0x28/0x30
[<00000001459a71dc>] kernel_thread_starter+0x0/0x10
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/kernel/topology.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -291,7 +291,8 @@ int arch_update_cpu_topology(void)
topology_update_polarization_simple();
for_each_online_cpu(cpu) {
dev = get_cpu_device(cpu);
- kobject_uevent(&dev->kobj, KOBJ_CHANGE);
+ if (dev)
+ kobject_uevent(&dev->kobj, KOBJ_CHANGE);
}
return rc;
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 03/79] s390/cio: avoid calling strlen on null pointer
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 01/79] KVM: s390: Test for bad access register and size at the start of S390_MEM_OP Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 02/79] s390/topology: avoid firing events before kobjs are created Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 04/79] s390/cio: exclude subchannels with no parent from pseudo check Greg Kroah-Hartman
` (81 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sebastian Ott, Vasily Gorbik
From: Vasily Gorbik <gor@linux.ibm.com>
commit ea298e6ee8b34b3ed4366be7eb799d0650ebe555 upstream.
Fix the following kasan finding:
BUG: KASAN: global-out-of-bounds in ccwgroup_create_dev+0x850/0x1140
Read of size 1 at addr 0000000000000000 by task systemd-udevd.r/561
CPU: 30 PID: 561 Comm: systemd-udevd.r Tainted: G B
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
([<0000000231b3db7e>] show_stack+0x14e/0x1a8)
[<0000000233826410>] dump_stack+0x1d0/0x218
[<000000023216fac4>] print_address_description+0x64/0x380
[<000000023216f5a8>] __kasan_report+0x138/0x168
[<00000002331b8378>] ccwgroup_create_dev+0x850/0x1140
[<00000002332b618a>] group_store+0x3a/0x50
[<00000002323ac706>] kernfs_fop_write+0x246/0x3b8
[<00000002321d409a>] vfs_write+0x132/0x450
[<00000002321d47da>] ksys_write+0x122/0x208
[<0000000233877102>] system_call+0x2a6/0x2c8
Triggered by:
openat(AT_FDCWD, "/sys/bus/ccwgroup/drivers/qeth/group",
O_WRONLY|O_CREAT|O_TRUNC|O_CLOEXEC, 0666) = 16
write(16, "0.0.bd00,0.0.bd01,0.0.bd02", 26) = 26
The problem is that __get_next_id in ccwgroup_create_dev might set "buf"
buffer pointer to NULL and explicit check for that is required.
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/s390/cio/ccwgroup.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -369,7 +369,7 @@ int ccwgroup_create_dev(struct device *p
goto error;
}
/* Check for trailing stuff. */
- if (i == num_devices && strlen(buf) > 0) {
+ if (i == num_devices && buf && strlen(buf) > 0) {
rc = -EINVAL;
goto error;
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 04/79] s390/cio: exclude subchannels with no parent from pseudo check
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (2 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 03/79] s390/cio: avoid calling strlen on null pointer Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 05/79] KVM: nVMX: handle page fault in vmread fix Greg Kroah-Hartman
` (80 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sebastian Ott, Vasily Gorbik
From: Vasily Gorbik <gor@linux.ibm.com>
commit ab5758848039de9a4b249d46e4ab591197eebaf2 upstream.
ccw console is created early in start_kernel and used before css is
initialized or ccw console subchannel is registered. Until then console
subchannel does not have a parent. For that reason assume subchannels
with no parent are not pseudo subchannels. This fixes the following
kasan finding:
BUG: KASAN: global-out-of-bounds in sch_is_pseudo_sch+0x8e/0x98
Read of size 8 at addr 00000000000005e8 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc8-07370-g6ac43dd12538 #2
Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
Call Trace:
([<000000000012cd76>] show_stack+0x14e/0x1e0)
[<0000000001f7fb44>] dump_stack+0x1a4/0x1f8
[<00000000007d7afc>] print_address_description+0x64/0x3c8
[<00000000007d75f6>] __kasan_report+0x14e/0x180
[<00000000018a2986>] sch_is_pseudo_sch+0x8e/0x98
[<000000000189b950>] cio_enable_subchannel+0x1d0/0x510
[<00000000018cac7c>] ccw_device_recognition+0x12c/0x188
[<0000000002ceb1a8>] ccw_device_enable_console+0x138/0x340
[<0000000002cf1cbe>] con3215_init+0x25e/0x300
[<0000000002c8770a>] console_init+0x68a/0x9b8
[<0000000002c6a3d6>] start_kernel+0x4fe/0x728
[<0000000000100070>] startup_continue+0x70/0xd0
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/s390/cio/css.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -1120,6 +1120,8 @@ device_initcall(cio_settle_init);
int sch_is_pseudo_sch(struct subchannel *sch)
{
+ if (!sch->dev.parent)
+ return 0;
return sch == to_css(sch->dev.parent)->pseudo_subchannel;
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 05/79] KVM: nVMX: handle page fault in vmread fix
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (3 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 04/79] s390/cio: exclude subchannels with no parent from pseudo check Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 06/79] ASoC: Define a set of DAPM pre/post-up events Greg Kroah-Hartman
` (79 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jack Wang, Paolo Bonzini
From: Jack Wang <jinpu.wang@cloud.ionos.com>
During backport f7eea636c3d5 ("KVM: nVMX: handle page fault in vmread"),
there was a mistake the exception reference should be passed to function
kvm_write_guest_virt_system, instead of NULL, other wise, we will get
NULL pointer deref, eg
kvm-unit-test triggered a NULL pointer deref below:
[ 948.518437] kvm [24114]: vcpu0, guest rIP: 0x407ef9 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x3, nop
[ 949.106464] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 949.106707] PGD 0 P4D 0
[ 949.106872] Oops: 0002 [#1] SMP
[ 949.107038] CPU: 2 PID: 24126 Comm: qemu-2.7 Not tainted 4.19.77-pserver #4.19.77-1+feature+daily+update+20191005.1625+a4168bb~deb9
[ 949.107283] Hardware name: Dell Inc. Precision Tower 3620/09WH54, BIOS 2.7.3 01/31/2018
[ 949.107549] RIP: 0010:kvm_write_guest_virt_system+0x12/0x40 [kvm]
[ 949.107719] Code: c0 5d 41 5c 41 5d 41 5e 83 f8 03 41 0f 94 c0 41 c1 e0 02 e9 b0 ed ff ff 0f 1f 44 00 00 48 89 f0 c6 87 59 56 00 00 01 48 89 d6 <49> c7 00 00 00 00 00 89 ca 49 c7 40 08 00 00 00 00 49 c7 40 10 00
[ 949.108044] RSP: 0018:ffffb31b0a953cb0 EFLAGS: 00010202
[ 949.108216] RAX: 000000000046b4d8 RBX: ffff9e9f415b0000 RCX: 0000000000000008
[ 949.108389] RDX: ffffb31b0a953cc0 RSI: ffffb31b0a953cc0 RDI: ffff9e9f415b0000
[ 949.108562] RBP: 00000000d2e14928 R08: 0000000000000000 R09: 0000000000000000
[ 949.108733] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffffffffc8
[ 949.108907] R13: 0000000000000002 R14: ffff9e9f4f26f2e8 R15: 0000000000000000
[ 949.109079] FS: 00007eff8694c700(0000) GS:ffff9e9f51a80000(0000) knlGS:0000000031415928
[ 949.109318] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 949.109495] CR2: 0000000000000000 CR3: 00000003be53b002 CR4: 00000000003626e0
[ 949.109671] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 949.109845] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 949.110017] Call Trace:
[ 949.110186] handle_vmread+0x22b/0x2f0 [kvm_intel]
[ 949.110356] ? vmexit_fill_RSB+0xc/0x30 [kvm_intel]
[ 949.110549] kvm_arch_vcpu_ioctl_run+0xa98/0x1b30 [kvm]
[ 949.110725] ? kvm_vcpu_ioctl+0x388/0x5d0 [kvm]
[ 949.110901] kvm_vcpu_ioctl+0x388/0x5d0 [kvm]
[ 949.111072] do_vfs_ioctl+0xa2/0x620
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
---
arch/x86/kvm/vmx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -7276,7 +7276,7 @@ static int handle_vmread(struct kvm_vcpu
/* _system ok, as nested_vmx_check_permission verified cpl=0 */
if (kvm_write_guest_virt_system(vcpu, gva, &field_value,
(is_long_mode(vcpu) ? 8 : 4),
- NULL))
+ &e))
kvm_inject_page_fault(vcpu, &e);
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 06/79] ASoC: Define a set of DAPM pre/post-up events
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (4 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 05/79] KVM: nVMX: handle page fault in vmread fix Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 07/79] powerpc/powernv: Restrict OPAL symbol map to only be readable by root Greg Kroah-Hartman
` (78 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleksandr Suvorov, Marcel Ziswiler,
Igor Opaniuk, Fabio Estevam, Mark Brown
From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
commit cfc8f568aada98f9608a0a62511ca18d647613e2 upstream.
Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.
Cc: stable@vger.kernel.org
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-2-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/sound/soc-dapm.h | 2 ++
1 file changed, 2 insertions(+)
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -335,6 +335,8 @@ struct device;
#define SND_SOC_DAPM_WILL_PMD 0x80 /* called at start of sequence */
#define SND_SOC_DAPM_PRE_POST_PMD \
(SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
+#define SND_SOC_DAPM_PRE_POST_PMU \
+ (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU)
/* convenience event type detection */
#define SND_SOC_DAPM_EVENT_ON(e) \
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 07/79] powerpc/powernv: Restrict OPAL symbol map to only be readable by root
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (5 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 06/79] ASoC: Define a set of DAPM pre/post-up events Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 08/79] can: mcp251x: mcp251x_hw_reset(): allow more time after a reset Greg Kroah-Hartman
` (77 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Ellerman, Andrew Donnellan
From: Andrew Donnellan <ajd@linux.ibm.com>
commit e7de4f7b64c23e503a8c42af98d56f2a7462bd6d upstream.
Currently the OPAL symbol map is globally readable, which seems bad as
it contains physical addresses.
Restrict it to root.
Fixes: c8742f85125d ("powerpc/powernv: Expose OPAL firmware symbol map")
Cc: stable@vger.kernel.org # v3.19+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190503075253.22798-1-ajd@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/platforms/powernv/opal.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -580,7 +580,10 @@ static ssize_t symbol_map_read(struct fi
bin_attr->size);
}
-static BIN_ATTR_RO(symbol_map, 0);
+static struct bin_attribute symbol_map_attr = {
+ .attr = {.name = "symbol_map", .mode = 0400},
+ .read = symbol_map_read
+};
static void opal_export_symmap(void)
{
@@ -597,10 +600,10 @@ static void opal_export_symmap(void)
return;
/* Setup attributes */
- bin_attr_symbol_map.private = __va(be64_to_cpu(syms[0]));
- bin_attr_symbol_map.size = be64_to_cpu(syms[1]);
+ symbol_map_attr.private = __va(be64_to_cpu(syms[0]));
+ symbol_map_attr.size = be64_to_cpu(syms[1]);
- rc = sysfs_create_bin_file(opal_kobj, &bin_attr_symbol_map);
+ rc = sysfs_create_bin_file(opal_kobj, &symbol_map_attr);
if (rc)
pr_warn("Error %d creating OPAL symbols file\n", rc);
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 08/79] can: mcp251x: mcp251x_hw_reset(): allow more time after a reset
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (6 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 07/79] powerpc/powernv: Restrict OPAL symbol map to only be readable by root Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 09/79] crypto: qat - Silence smp_processor_id() warning Greg Kroah-Hartman
` (76 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sean Nyekjaer, Marc Kleine-Budde
From: Marc Kleine-Budde <mkl@pengutronix.de>
commit d84ea2123f8d27144e3f4d58cd88c9c6ddc799de upstream.
Some boards take longer than 5ms to power up after a reset, so allow
some retries attempts before giving up.
Fixes: ff06d611a31c ("can: mcp251x: Improve mcp251x_hw_reset()")
Cc: linux-stable <stable@vger.kernel.org>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/spi/mcp251x.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -627,7 +627,7 @@ static int mcp251x_setup(struct net_devi
static int mcp251x_hw_reset(struct spi_device *spi)
{
struct mcp251x_priv *priv = spi_get_drvdata(spi);
- u8 reg;
+ unsigned long timeout;
int ret;
/* Wait for oscillator startup timer after power up */
@@ -641,10 +641,19 @@ static int mcp251x_hw_reset(struct spi_d
/* Wait for oscillator startup timer after reset */
mdelay(MCP251X_OST_DELAY_MS);
- reg = mcp251x_read_reg(spi, CANSTAT);
- if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
- return -ENODEV;
-
+ /* Wait for reset to finish */
+ timeout = jiffies + HZ;
+ while ((mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) !=
+ CANCTRL_REQOP_CONF) {
+ usleep_range(MCP251X_OST_DELAY_MS * 1000,
+ MCP251X_OST_DELAY_MS * 1000 * 2);
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(&spi->dev,
+ "MCP251x didn't enter in conf mode after reset\n");
+ return -EBUSY;
+ }
+ }
return 0;
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 09/79] crypto: qat - Silence smp_processor_id() warning
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (7 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 08/79] can: mcp251x: mcp251x_hw_reset(): allow more time after a reset Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 10/79] ieee802154: atusb: fix use-after-free at disconnect Greg Kroah-Hartman
` (75 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexander Sverdlin, Herbert Xu
From: Alexander Sverdlin <alexander.sverdlin@nokia.com>
commit 1b82feb6c5e1996513d0fb0bbb475417088b4954 upstream.
It seems that smp_processor_id() is only used for a best-effort
load-balancing, refer to qat_crypto_get_instance_node(). It's not feasible
to disable preemption for the duration of the crypto requests. Therefore,
just silence the warning. This commit is similar to e7a9b05ca4
("crypto: cavium - Fix smp_processor_id() warnings").
Silences the following splat:
BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/2904
caller is qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat]
CPU: 1 PID: 2904 Comm: cryptomgr_test Tainted: P O 4.14.69 #1
...
Call Trace:
dump_stack+0x5f/0x86
check_preemption_disabled+0xd3/0xe0
qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat]
skcipher_setkey_ablkcipher+0x2b/0x40
__test_skcipher+0x1f3/0xb20
? cpumask_next_and+0x26/0x40
? find_busiest_group+0x10e/0x9d0
? preempt_count_add+0x49/0xa0
? try_module_get+0x61/0xf0
? crypto_mod_get+0x15/0x30
? __kmalloc+0x1df/0x1f0
? __crypto_alloc_tfm+0x116/0x180
? crypto_skcipher_init_tfm+0xa6/0x180
? crypto_create_tfm+0x4b/0xf0
test_skcipher+0x21/0xa0
alg_test_skcipher+0x3f/0xa0
alg_test.part.6+0x126/0x2a0
? finish_task_switch+0x21b/0x260
? __schedule+0x1e9/0x800
? __wake_up_common+0x8d/0x140
cryptomgr_test+0x40/0x50
kthread+0xff/0x130
? cryptomgr_notify+0x540/0x540
? kthread_create_on_node+0x70/0x70
ret_from_fork+0x24/0x50
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/crypto/qat/qat_common/adf_common_drv.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/crypto/qat/qat_common/adf_common_drv.h
+++ b/drivers/crypto/qat/qat_common/adf_common_drv.h
@@ -95,7 +95,7 @@ struct service_hndl {
static inline int get_current_node(void)
{
- return topology_physical_package_id(smp_processor_id());
+ return topology_physical_package_id(raw_smp_processor_id());
}
int adf_service_register(struct service_hndl *service);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 10/79] ieee802154: atusb: fix use-after-free at disconnect
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (8 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 09/79] crypto: qat - Silence smp_processor_id() warning Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 11/79] cfg80211: initialize on-stack chandefs Greg Kroah-Hartman
` (74 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexander Aring,
syzbot+f4509a9138a1472e7e80, Johan Hovold, Stefan Schmidt
From: Johan Hovold <johan@kernel.org>
commit 7fd25e6fc035f4b04b75bca6d7e8daa069603a76 upstream.
The disconnect callback was accessing the hardware-descriptor private
data after having having freed it.
Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
Cc: stable <stable@vger.kernel.org> # 4.2
Cc: Alexander Aring <alex.aring@gmail.com>
Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ieee802154/atusb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -756,10 +756,11 @@ static void atusb_disconnect(struct usb_
ieee802154_unregister_hw(atusb->hw);
+ usb_put_dev(atusb->usb_dev);
+
ieee802154_free_hw(atusb->hw);
usb_set_intfdata(interface, NULL);
- usb_put_dev(atusb->usb_dev);
pr_debug("atusb_disconnect done\n");
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 11/79] cfg80211: initialize on-stack chandefs
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (9 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 10/79] ieee802154: atusb: fix use-after-free at disconnect Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 12/79] ima: always return negative code for error Greg Kroah-Hartman
` (73 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dmitry Osipenko, Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
commit f43e5210c739fe76a4b0ed851559d6902f20ceb1 upstream.
In a few places we don't properly initialize on-stack chandefs,
resulting in EDMG data to be non-zero, which broke things.
Additionally, in a few places we rely on the driver to init the
data completely, but perhaps we shouldn't as non-EDMG drivers
may not initialize the EDMG data, also initialize it there.
Cc: stable@vger.kernel.org
Fixes: 2a38075cd0be ("nl80211: Add support for EDMG channels")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/wireless/nl80211.c | 4 +++-
net/wireless/reg.c | 2 +-
net/wireless/wext-compat.c | 2 +-
3 files changed, 5 insertions(+), 3 deletions(-)
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1934,6 +1934,8 @@ static int nl80211_parse_chandef(struct
control_freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+ memset(chandef, 0, sizeof(*chandef));
+
chandef->chan = ieee80211_get_channel(&rdev->wiphy, control_freq);
chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
chandef->center_freq1 = control_freq;
@@ -2402,7 +2404,7 @@ static int nl80211_send_iface(struct sk_
if (rdev->ops->get_channel) {
int ret;
- struct cfg80211_chan_def chandef;
+ struct cfg80211_chan_def chandef = {};
ret = rdev_get_channel(rdev, wdev, &chandef);
if (ret == 0) {
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1604,7 +1604,7 @@ static void reg_call_notifier(struct wip
static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev)
{
- struct cfg80211_chan_def chandef;
+ struct cfg80211_chan_def chandef = {};
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
enum nl80211_iftype iftype;
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -821,7 +821,7 @@ static int cfg80211_wext_giwfreq(struct
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
- struct cfg80211_chan_def chandef;
+ struct cfg80211_chan_def chandef = {};
int ret;
switch (wdev->iftype) {
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 12/79] ima: always return negative code for error
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (10 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 11/79] cfg80211: initialize on-stack chandefs Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 13/79] fs: nfs: Fix possible null-pointer dereferences in encode_attrs() Greg Kroah-Hartman
` (72 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Sascha Hauer, Mimi Zohar, Sasha Levin
From: Sascha Hauer <s.hauer@pengutronix.de>
[ Upstream commit f5e1040196dbfe14c77ce3dfe3b7b08d2d961e88 ]
integrity_kernel_read() returns the number of bytes read. If this is
a short read then this positive value is returned from
ima_calc_file_hash_atfm(). Currently this is only indirectly called from
ima_calc_file_hash() and this function only tests for the return value
being zero or nonzero and also doesn't forward the return value.
Nevertheless there's no point in returning a positive value as an error,
so translate a short read into -EINVAL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
security/integrity/ima/ima_crypto.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index a29209fa56746..5c87baaefafb6 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -298,8 +298,11 @@ static int ima_calc_file_hash_atfm(struct file *file,
rbuf_len = min_t(loff_t, i_size - offset, rbuf_size[active]);
rc = integrity_kernel_read(file, offset, rbuf[active],
rbuf_len);
- if (rc != rbuf_len)
+ if (rc != rbuf_len) {
+ if (rc >= 0)
+ rc = -EINVAL;
goto out3;
+ }
if (rbuf[1] && offset) {
/* Using two buffers, and it is not the first
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 13/79] fs: nfs: Fix possible null-pointer dereferences in encode_attrs()
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (11 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 12/79] ima: always return negative code for error Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 14/79] 9p: avoid attaching writeback_fid on mmap with type PRIVATE Greg Kroah-Hartman
` (71 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jia-Ju Bai, Anna Schumaker, Sasha Levin
From: Jia-Ju Bai <baijiaju1990@gmail.com>
[ Upstream commit e2751463eaa6f9fec8fea80abbdc62dbc487b3c5 ]
In encode_attrs(), there is an if statement on line 1145 to check
whether label is NULL:
if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL))
When label is NULL, it is used on lines 1178-1181:
*p++ = cpu_to_be32(label->lfs);
*p++ = cpu_to_be32(label->pi);
*p++ = cpu_to_be32(label->len);
p = xdr_encode_opaque_fixed(p, label->label, label->len);
To fix these bugs, label is checked before being used.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/nfs/nfs4xdr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 1cb50bb898b01..15cd9db6d616d 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -1123,7 +1123,7 @@ static void encode_attrs(struct xdr_stream *xdr, const struct iattr *iap,
} else
*p++ = cpu_to_be32(NFS4_SET_TO_SERVER_TIME);
}
- if (bmval[2] & FATTR4_WORD2_SECURITY_LABEL) {
+ if (label && (bmval[2] & FATTR4_WORD2_SECURITY_LABEL)) {
*p++ = cpu_to_be32(label->lfs);
*p++ = cpu_to_be32(label->pi);
*p++ = cpu_to_be32(label->len);
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 14/79] 9p: avoid attaching writeback_fid on mmap with type PRIVATE
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (12 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 13/79] fs: nfs: Fix possible null-pointer dereferences in encode_attrs() Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 15/79] xen/pci: reserve MCFG areas earlier Greg Kroah-Hartman
` (70 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chengguang Xu, Dominique Martinet,
Sasha Levin
From: Chengguang Xu <cgxu519@zoho.com.cn>
[ Upstream commit c87a37ebd40b889178664c2c09cc187334146292 ]
Currently on mmap cache policy, we always attach writeback_fid
whether mmap type is SHARED or PRIVATE. However, in the use case
of kata-container which combines 9p(Guest OS) with overlayfs(Host OS),
this behavior will trigger overlayfs' copy-up when excute command
inside container.
Link: http://lkml.kernel.org/r/20190820100325.10313-1-cgxu519@zoho.com.cn
Signed-off-by: Chengguang Xu <cgxu519@zoho.com.cn>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/9p/vfs_file.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 373cc50544e91..9dbf371471261 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -528,6 +528,7 @@ v9fs_mmap_file_mmap(struct file *filp, struct vm_area_struct *vma)
v9inode = V9FS_I(inode);
mutex_lock(&v9inode->v_mutex);
if (!v9inode->writeback_fid &&
+ (vma->vm_flags & VM_SHARED) &&
(vma->vm_flags & VM_WRITE)) {
/*
* clone a fid and add it to writeback_fid
@@ -629,6 +630,8 @@ static void v9fs_mmap_vm_close(struct vm_area_struct *vma)
(vma->vm_end - vma->vm_start - 1),
};
+ if (!(vma->vm_flags & VM_SHARED))
+ return;
p9_debug(P9_DEBUG_VFS, "9p VMA close, %p, flushing", vma);
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 15/79] xen/pci: reserve MCFG areas earlier
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (13 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 14/79] 9p: avoid attaching writeback_fid on mmap with type PRIVATE Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 16/79] ceph: fix directories inode i_blkbits initialization Greg Kroah-Hartman
` (69 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Igor Druzhinin, Boris Ostrovsky, Sasha Levin
From: Igor Druzhinin <igor.druzhinin@citrix.com>
[ Upstream commit a4098bc6eed5e31e0391bcc068e61804c98138df ]
If MCFG area is not reserved in E820, Xen by default will defer its usage
until Dom0 registers it explicitly after ACPI parser recognizes it as
a reserved resource in DSDT. Having it reserved in E820 is not
mandatory according to "PCI Firmware Specification, rev 3.2" (par. 4.1.2)
and firmware is free to keep a hole in E820 in that place. Xen doesn't know
what exactly is inside this hole since it lacks full ACPI view of the
platform therefore it's potentially harmful to access MCFG region
without additional checks as some machines are known to provide
inconsistent information on the size of the region.
Now xen_mcfg_late() runs after acpi_init() which is too late as some basic
PCI enumeration starts exactly there as well. Trying to register a device
prior to MCFG reservation causes multiple problems with PCIe extended
capability initializations in Xen (e.g. SR-IOV VF BAR sizing). There are
no convenient hooks for us to subscribe to so register MCFG areas earlier
upon the first invocation of xen_add_device(). It should be safe to do once
since all the boot time buses must have their MCFG areas in MCFG table
already and we don't support PCI bus hot-plug.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/xen/pci.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
index 7494dbeb4409c..db58aaa4dc598 100644
--- a/drivers/xen/pci.c
+++ b/drivers/xen/pci.c
@@ -29,6 +29,8 @@
#include "../pci/pci.h"
#ifdef CONFIG_PCI_MMCONFIG
#include <asm/pci_x86.h>
+
+static int xen_mcfg_late(void);
#endif
static bool __read_mostly pci_seg_supported = true;
@@ -40,7 +42,18 @@ static int xen_add_device(struct device *dev)
#ifdef CONFIG_PCI_IOV
struct pci_dev *physfn = pci_dev->physfn;
#endif
-
+#ifdef CONFIG_PCI_MMCONFIG
+ static bool pci_mcfg_reserved = false;
+ /*
+ * Reserve MCFG areas in Xen on first invocation due to this being
+ * potentially called from inside of acpi_init immediately after
+ * MCFG table has been finally parsed.
+ */
+ if (!pci_mcfg_reserved) {
+ xen_mcfg_late();
+ pci_mcfg_reserved = true;
+ }
+#endif
if (pci_seg_supported) {
struct {
struct physdev_pci_device_add add;
@@ -213,7 +226,7 @@ static int __init register_xen_pci_notifier(void)
arch_initcall(register_xen_pci_notifier);
#ifdef CONFIG_PCI_MMCONFIG
-static int __init xen_mcfg_late(void)
+static int xen_mcfg_late(void)
{
struct pci_mmcfg_region *cfg;
int rc;
@@ -252,8 +265,4 @@ static int __init xen_mcfg_late(void)
}
return 0;
}
-/*
- * Needs to be done after acpi_init which are subsys_initcall.
- */
-subsys_initcall_sync(xen_mcfg_late);
#endif
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 16/79] ceph: fix directories inode i_blkbits initialization
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (14 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 15/79] xen/pci: reserve MCFG areas earlier Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 17/79] drm/amdgpu: Check for valid number of registers to read Greg Kroah-Hartman
` (68 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Luis Henriques, Jeff Layton,
Ilya Dryomov, Sasha Levin
From: Luis Henriques <lhenriques@suse.com>
[ Upstream commit 750670341a24cb714e624e0fd7da30900ad93752 ]
When filling an inode with info from the MDS, i_blkbits is being
initialized using fl_stripe_unit, which contains the stripe unit in
bytes. Unfortunately, this doesn't make sense for directories as they
have fl_stripe_unit set to '0'. This means that i_blkbits will be set
to 0xff, causing an UBSAN undefined behaviour in i_blocksize():
UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12
shift exponent 255 is too large for 32-bit type 'int'
Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit
is zero.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/ceph/inode.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index a663b676d5661..2ad3f4ab4dcfa 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -725,7 +725,12 @@ static int fill_inode(struct inode *inode, struct page *locked_page,
ci->i_version = le64_to_cpu(info->version);
inode->i_version++;
inode->i_rdev = le32_to_cpu(info->rdev);
- inode->i_blkbits = fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
+ /* directories have fl_stripe_unit set to zero */
+ if (le32_to_cpu(info->layout.fl_stripe_unit))
+ inode->i_blkbits =
+ fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
+ else
+ inode->i_blkbits = CEPH_BLOCK_SHIFT;
if ((new_version || (new_issued & CEPH_CAP_AUTH_SHARED)) &&
(issued & CEPH_CAP_AUTH_EXCL) == 0) {
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 17/79] drm/amdgpu: Check for valid number of registers to read
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (15 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 16/79] ceph: fix directories inode i_blkbits initialization Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 18/79] thermal: Fix use-after-free when unregistering thermal zone device Greg Kroah-Hartman
` (67 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Trek, Alex Deucher, Sasha Levin
From: Trek <trek00@inbox.ru>
[ Upstream commit 73d8e6c7b841d9bf298c8928f228fb433676635c ]
Do not try to allocate any amount of memory requested by the user.
Instead limit it to 128 registers. Actually the longest series of
consecutive allowed registers are 48, mmGB_TILE_MODE0-31 and
mmGB_MACROTILE_MODE0-15 (0x2644-0x2673).
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111273
Signed-off-by: Trek <trek00@inbox.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index a5c8240784726..e35e603710b4d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -406,6 +406,9 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file
if (sh_num == AMDGPU_INFO_MMR_SH_INDEX_MASK)
sh_num = 0xffffffff;
+ if (info->read_mmr_reg.count > 128)
+ return -EINVAL;
+
regs = kmalloc_array(info->read_mmr_reg.count, sizeof(*regs), GFP_KERNEL);
if (!regs)
return -ENOMEM;
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 18/79] thermal: Fix use-after-free when unregistering thermal zone device
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (16 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 17/79] drm/amdgpu: Check for valid number of registers to read Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 19/79] fuse: fix memleak in cuse_channel_open Greg Kroah-Hartman
` (66 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Pirko, Ido Schimmel, Zhang Rui,
Sasha Levin
From: Ido Schimmel <idosch@mellanox.com>
[ Upstream commit 1851799e1d2978f68eea5d9dff322e121dcf59c1 ]
thermal_zone_device_unregister() cancels the delayed work that polls the
thermal zone, but it does not wait for it to finish. This is racy with
respect to the freeing of the thermal zone device, which can result in a
use-after-free [1].
Fix this by waiting for the delayed work to finish before freeing the
thermal zone device. Note that thermal_zone_device_set_polling() is
never invoked from an atomic context, so it is safe to call
cancel_delayed_work_sync() that can block.
[1]
[ +0.002221] ==================================================================
[ +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0
[ +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17
[ +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701
[ +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check
[ +0.000012] Call Trace:
[ +0.000021] dump_stack+0xa9/0x10e
[ +0.000020] print_address_description.cold.2+0x9/0x25e
[ +0.000018] __kasan_report.cold.3+0x78/0x9d
[ +0.000016] kasan_report+0xe/0x20
[ +0.000016] __mutex_lock+0x1076/0x11c0
[ +0.000014] step_wise_throttle+0x72/0x150
[ +0.000018] handle_thermal_trip+0x167/0x760
[ +0.000019] thermal_zone_device_update+0x19e/0x5f0
[ +0.000019] process_one_work+0x969/0x16f0
[ +0.000017] worker_thread+0x91/0xc40
[ +0.000014] kthread+0x33d/0x400
[ +0.000015] ret_from_fork+0x3a/0x50
[ +0.000020] Allocated by task 1:
[ +0.000015] save_stack+0x19/0x80
[ +0.000015] __kasan_kmalloc.constprop.4+0xc1/0xd0
[ +0.000014] kmem_cache_alloc_trace+0x152/0x320
[ +0.000015] thermal_zone_device_register+0x1b4/0x13a0
[ +0.000015] mlxsw_thermal_init+0xc92/0x23d0
[ +0.000014] __mlxsw_core_bus_device_register+0x659/0x11b0
[ +0.000013] mlxsw_core_bus_device_register+0x3d/0x90
[ +0.000013] mlxsw_pci_probe+0x355/0x4b0
[ +0.000014] local_pci_probe+0xc3/0x150
[ +0.000013] pci_device_probe+0x280/0x410
[ +0.000013] really_probe+0x26a/0xbb0
[ +0.000013] driver_probe_device+0x208/0x2e0
[ +0.000013] device_driver_attach+0xfe/0x140
[ +0.000013] __driver_attach+0x110/0x310
[ +0.000013] bus_for_each_dev+0x14b/0x1d0
[ +0.000013] driver_register+0x1c0/0x400
[ +0.000015] mlxsw_sp_module_init+0x5d/0xd3
[ +0.000014] do_one_initcall+0x239/0x4dd
[ +0.000013] kernel_init_freeable+0x42b/0x4e8
[ +0.000012] kernel_init+0x11/0x18b
[ +0.000013] ret_from_fork+0x3a/0x50
[ +0.000015] Freed by task 581:
[ +0.000013] save_stack+0x19/0x80
[ +0.000014] __kasan_slab_free+0x125/0x170
[ +0.000013] kfree+0xf3/0x310
[ +0.000013] thermal_release+0xc7/0xf0
[ +0.000014] device_release+0x77/0x200
[ +0.000014] kobject_put+0x1a8/0x4c0
[ +0.000014] device_unregister+0x38/0xc0
[ +0.000014] thermal_zone_device_unregister+0x54e/0x6a0
[ +0.000014] mlxsw_thermal_fini+0x184/0x35a
[ +0.000014] mlxsw_core_bus_device_unregister+0x10a/0x640
[ +0.000013] mlxsw_devlink_core_bus_device_reload+0x92/0x210
[ +0.000015] devlink_nl_cmd_reload+0x113/0x1f0
[ +0.000014] genl_family_rcv_msg+0x700/0xee0
[ +0.000013] genl_rcv_msg+0xca/0x170
[ +0.000013] netlink_rcv_skb+0x137/0x3a0
[ +0.000012] genl_rcv+0x29/0x40
[ +0.000013] netlink_unicast+0x49b/0x660
[ +0.000013] netlink_sendmsg+0x755/0xc90
[ +0.000013] __sys_sendto+0x3de/0x430
[ +0.000013] __x64_sys_sendto+0xe2/0x1b0
[ +0.000013] do_syscall_64+0xa4/0x4d0
[ +0.000013] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ +0.000017] The buggy address belongs to the object at ffff8881e48e0008
which belongs to the cache kmalloc-2k of size 2048
[ +0.000012] The buggy address is located 1096 bytes inside of
2048-byte region [ffff8881e48e0008, ffff8881e48e0808)
[ +0.000007] The buggy address belongs to the page:
[ +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0
[ +0.000020] flags: 0x200000000010200(slab|head)
[ +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0
[ +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ +0.000007] page dumped because: kasan: bad access detected
[ +0.000012] Memory state around the buggy address:
[ +0.000012] ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000008] ^
[ +0.000012] ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000012] ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ +0.000007] ==================================================================
Fixes: b1569e99c795 ("ACPI: move thermal trip handling to generic thermal layer")
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/thermal/thermal_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 3d5f8f432b5b1..929092fc25ef5 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -402,7 +402,7 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
mod_delayed_work(system_freezable_wq, &tz->poll_queue,
msecs_to_jiffies(delay));
else
- cancel_delayed_work(&tz->poll_queue);
+ cancel_delayed_work_sync(&tz->poll_queue);
}
static void monitor_thermal_zone(struct thermal_zone_device *tz)
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 19/79] fuse: fix memleak in cuse_channel_open
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (17 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 18/79] thermal: Fix use-after-free when unregistering thermal zone device Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 20/79] kernel/elfcore.c: include proper prototypes Greg Kroah-Hartman
` (65 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, zhengbin, Miklos Szeredi,
Sasha Levin
From: zhengbin <zhengbin13@huawei.com>
[ Upstream commit 9ad09b1976c562061636ff1e01bfc3a57aebe56b ]
If cuse_send_init fails, need to fuse_conn_put cc->fc.
cuse_channel_open->fuse_conn_init->refcount_set(&fc->count, 1)
->fuse_dev_alloc->fuse_conn_get
->fuse_dev_free->fuse_conn_put
Fixes: cc080e9e9be1 ("fuse: introduce per-instance fuse_dev structure")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/fuse/cuse.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
index c5b6b71654893..d9aba97007267 100644
--- a/fs/fuse/cuse.c
+++ b/fs/fuse/cuse.c
@@ -513,6 +513,7 @@ static int cuse_channel_open(struct inode *inode, struct file *file)
rc = cuse_send_init(cc);
if (rc) {
fuse_dev_free(fud);
+ fuse_conn_put(&cc->fc);
return rc;
}
file->private_data = fud;
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 20/79] kernel/elfcore.c: include proper prototypes
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (18 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 19/79] fuse: fix memleak in cuse_channel_open Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 21/79] tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure Greg Kroah-Hartman
` (64 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Valdis Kletnieks, Andrew Morton,
Linus Torvalds, Sasha Levin
From: Valdis Kletnieks <valdis.kletnieks@vt.edu>
[ Upstream commit 0f74914071ab7e7b78731ed62bf350e3a344e0a5 ]
When building with W=1, gcc properly complains that there's no prototypes:
CC kernel/elfcore.o
kernel/elfcore.c:7:17: warning: no previous prototype for 'elf_core_extra_phdrs' [-Wmissing-prototypes]
7 | Elf_Half __weak elf_core_extra_phdrs(void)
| ^~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:12:12: warning: no previous prototype for 'elf_core_write_extra_phdrs' [-Wmissing-prototypes]
12 | int __weak elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:17:12: warning: no previous prototype for 'elf_core_write_extra_data' [-Wmissing-prototypes]
17 | int __weak elf_core_write_extra_data(struct coredump_params *cprm)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:22:15: warning: no previous prototype for 'elf_core_extra_data_size' [-Wmissing-prototypes]
22 | size_t __weak elf_core_extra_data_size(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Provide the include file so gcc is happy, and we don't have potential code drift
Link: http://lkml.kernel.org/r/29875.1565224705@turing-police
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/elfcore.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/elfcore.c b/kernel/elfcore.c
index e556751d15d94..a2b29b9bdfcb2 100644
--- a/kernel/elfcore.c
+++ b/kernel/elfcore.c
@@ -2,6 +2,7 @@
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/binfmts.h>
+#include <linux/elfcore.h>
Elf_Half __weak elf_core_extra_phdrs(void)
{
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 21/79] tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (19 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 20/79] kernel/elfcore.c: include proper prototypes Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 22/79] perf stat: Fix a segmentation fault when using repeat forever Greg Kroah-Hartman
` (63 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Steven Rostedt (VMware),
Andrew Morton, Jiri Olsa, Namhyung Kim, linux-trace-devel,
Arnaldo Carvalho de Melo, Sasha Levin
From: Steven Rostedt (VMware) <rostedt@goodmis.org>
[ Upstream commit e0d2615856b2046c2e8d5bfd6933f37f69703b0b ]
If the re-allocation of tep->cmdlines succeeds, then the previous
allocation of tep->cmdlines will be freed. If we later fail in
add_new_comm(), we must not free cmdlines, and also should assign
tep->cmdlines to the new allocation. Otherwise when freeing tep, the
tep->cmdlines will be pointing to garbage.
Fixes: a6d2a61ac653a ("tools lib traceevent: Remove some die() calls")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/lib/traceevent/event-parse.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index df3c73e9dea49..9954b069b3ca2 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -265,10 +265,10 @@ static int add_new_comm(struct pevent *pevent, const char *comm, int pid)
errno = ENOMEM;
return -1;
}
+ pevent->cmdlines = cmdlines;
cmdlines[pevent->cmdline_count].comm = strdup(comm);
if (!cmdlines[pevent->cmdline_count].comm) {
- free(cmdlines);
errno = ENOMEM;
return -1;
}
@@ -279,7 +279,6 @@ static int add_new_comm(struct pevent *pevent, const char *comm, int pid)
pevent->cmdline_count++;
qsort(cmdlines, pevent->cmdline_count, sizeof(*cmdlines), cmdline_cmp);
- pevent->cmdlines = cmdlines;
return 0;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 22/79] perf stat: Fix a segmentation fault when using repeat forever
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (20 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 21/79] tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 23/79] crypto: caam - fix concurrency issue in givencrypt descriptor Greg Kroah-Hartman
` (62 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Srikar Dronamraju, Jiri Olsa,
Arnaldo Carvalho de Melo, Ravi Bangoria, Namhyung Kim,
Naveen N. Rao, Sasha Levin
From: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[ Upstream commit 443f2d5ba13d65ccfd879460f77941875159d154 ]
Observe a segmentation fault when 'perf stat' is asked to repeat forever
with the interval option.
Without fix:
# perf stat -r 0 -I 5000 -e cycles -a sleep 10
# time counts unit events
5.000211692 3,13,89,82,34,157 cycles
10.000380119 1,53,98,52,22,294 cycles
10.040467280 17,16,79,265 cycles
Segmentation fault
This problem was only observed when we use forever option aka -r 0 and
works with limited repeats. Calling print_counter with ts being set to
NULL, is not a correct option when interval is set. Hence avoid
print_counter(NULL,..) if interval is set.
With fix:
# perf stat -r 0 -I 5000 -e cycles -a sleep 10
# time counts unit events
5.019866622 3,15,14,43,08,697 cycles
10.039865756 3,15,16,31,95,261 cycles
10.059950628 1,26,05,47,158 cycles
5.009902655 3,14,52,62,33,932 cycles
10.019880228 3,14,52,22,89,154 cycles
10.030543876 66,90,18,333 cycles
5.009848281 3,14,51,98,25,437 cycles
10.029854402 3,15,14,93,04,918 cycles
5.009834177 3,14,51,95,92,316 cycles
Committer notes:
Did the 'git bisect' to find the cset introducing the problem to add the
Fixes tag below, and at that time the problem reproduced as:
(gdb) run stat -r0 -I500 sleep 1
<SNIP>
Program received signal SIGSEGV, Segmentation fault.
print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
866 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep);
(gdb) bt
#0 print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
#1 0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938
#2 0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411
#3 0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370
#4 0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429
#5 0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473
#6 0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588
(gdb)
Mostly the same as just before this patch:
Program received signal SIGSEGV, Segmentation fault.
0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
964 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
(gdb) bt
#0 0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
#1 0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670)
at util/stat-display.c:1172
#2 0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656
#3 0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960
#4 0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310
#5 0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362
#6 0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406
#7 0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531
(gdb)
Fixes: d4f63a4741a8 ("perf stat: Introduce print_counters function")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/perf/builtin-stat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index e77880b5094de..65a6922db7223 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -1416,7 +1416,7 @@ int cmd_stat(int argc, const char **argv, const char *prefix __maybe_unused)
run_idx + 1);
status = run_perf_stat(argc, argv);
- if (forever && status != -1) {
+ if (forever && status != -1 && !interval) {
print_counters(NULL, argc, argv);
perf_stat__reset_stats();
}
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 23/79] crypto: caam - fix concurrency issue in givencrypt descriptor
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (21 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 22/79] perf stat: Fix a segmentation fault when using repeat forever Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:49 ` [PATCH 4.4 24/79] cfg80211: add and use strongly typed element iteration macros Greg Kroah-Hartman
` (61 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Herbert Xu, Horia Geantă
From: Horia Geantă <horia.geanta@nxp.com>
commit 48f89d2a2920166c35b1c0b69917dbb0390ebec7 upstream.
IV transfer from ofifo to class2 (set up at [29][30]) is not guaranteed
to be scheduled before the data transfer from ofifo to external memory
(set up at [38]:
[29] 10FA0004 ld: ind-nfifo (len=4) imm
[30] 81F00010 <nfifo_entry: ofifo->class2 type=msg len=16>
[31] 14820004 ld: ccb2-datasz len=4 offs=0 imm
[32] 00000010 data:0x00000010
[33] 8210010D operation: cls1-op aes cbc init-final enc
[34] A8080B04 math: (seqin + math0)->vseqout len=4
[35] 28000010 seqfifold: skip len=16
[36] A8080A04 math: (seqin + math0)->vseqin len=4
[37] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz
[38] 69300000 seqfifostr: msg len=vseqoutsz
[39] 5C20000C seqstr: ccb2 ctx len=12 offs=0
If ofifo -> external memory transfer happens first, DECO will hang
(issuing a Watchdog Timeout error, if WDOG is enabled) waiting for
data availability in ofifo for the ofifo -> c2 ififo transfer.
Make sure IV transfer happens first by waiting for all CAAM internal
transfers to end before starting payload transfer.
New descriptor with jump command inserted at [37]:
[..]
[36] A8080A04 math: (seqin + math0)->vseqin len=4
[37] A1000401 jump: jsl1 all-match[!nfifopend] offset=[01] local->[38]
[38] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz
[39] 69300000 seqfifostr: msg len=vseqoutsz
[40] 5C20000C seqstr: ccb2 ctx len=12 offs=0
[Note: the issue is present in the descriptor from the very beginning
(cf. Fixes tag). However I've marked it v4.19+ since it's the oldest
maintained kernel that the patch applies clean against.]
Cc: <stable@vger.kernel.org> # v4.19+
Fixes: 1acebad3d8db8 ("crypto: caam - faster aead implementation")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[Horia: backport to v4.4, v4.9]
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/crypto/caam/caamalg.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -75,7 +75,7 @@
#define DESC_AEAD_BASE (4 * CAAM_CMD_SZ)
#define DESC_AEAD_ENC_LEN (DESC_AEAD_BASE + 11 * CAAM_CMD_SZ)
#define DESC_AEAD_DEC_LEN (DESC_AEAD_BASE + 15 * CAAM_CMD_SZ)
-#define DESC_AEAD_GIVENC_LEN (DESC_AEAD_ENC_LEN + 9 * CAAM_CMD_SZ)
+#define DESC_AEAD_GIVENC_LEN (DESC_AEAD_ENC_LEN + 10 * CAAM_CMD_SZ)
/* Note: Nonce is counted in enckeylen */
#define DESC_AEAD_CTR_RFC3686_LEN (4 * CAAM_CMD_SZ)
@@ -437,6 +437,7 @@ static int aead_set_sh_desc(struct crypt
u32 geniv, moveiv;
u32 ctx1_iv_off = 0;
u32 *desc;
+ u32 *wait_cmd;
const bool ctr_mode = ((ctx->class1_alg_type & OP_ALG_AAI_MASK) ==
OP_ALG_AAI_CTR_MOD128);
const bool is_rfc3686 = alg->caam.rfc3686;
@@ -702,6 +703,14 @@ copy_iv:
/* Will read cryptlen */
append_math_add(desc, VARSEQINLEN, SEQINLEN, REG0, CAAM_CMD_SZ);
+
+ /*
+ * Wait for IV transfer (ofifo -> class2) to finish before starting
+ * ciphertext transfer (ofifo -> external memory).
+ */
+ wait_cmd = append_jump(desc, JUMP_JSL | JUMP_TEST_ALL | JUMP_COND_NIFP);
+ set_jump_tgt_here(desc, wait_cmd);
+
append_seq_fifo_load(desc, 0, FIFOLD_CLASS_BOTH | KEY_VLF |
FIFOLD_TYPE_MSG1OUT2 | FIFOLD_TYPE_LASTBOTH);
append_seq_fifo_store(desc, 0, FIFOST_TYPE_MESSAGE_DATA | KEY_VLF);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 24/79] cfg80211: add and use strongly typed element iteration macros
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (22 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 23/79] crypto: caam - fix concurrency issue in givencrypt descriptor Greg Kroah-Hartman
@ 2019-10-16 21:49 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 25/79] cfg80211: Use const more consistently in for_each_element macros Greg Kroah-Hartman
` (60 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:49 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
commit 0f3b07f027f87a38ebe5c436490095df762819be upstream.
Rather than always iterating elements from frames with pure
u8 pointers, add a type "struct element" that encapsulates
the id/datalen/data format of them.
Then, add the element iteration macros
* for_each_element
* for_each_element_id
* for_each_element_extid
which take, as their first 'argument', such a structure and
iterate through a given u8 array interpreting it as elements.
While at it and since we'll need it, also add
* for_each_subelement
* for_each_subelement_id
* for_each_subelement_extid
which instead of taking data/length just take an outer element
and use its data/datalen.
Also add for_each_element_completed() to determine if any of
the loops above completed, i.e. it was able to parse all of
the elements successfully and no data remained.
Use for_each_element_id() in cfg80211_find_ie_match() as the
first user of this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/ieee80211.h | 53 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2550,4 +2550,57 @@ static inline bool ieee80211_action_cont
return true;
}
+struct element {
+ u8 id;
+ u8 datalen;
+ u8 data[];
+};
+
+/* element iteration helpers */
+#define for_each_element(element, _data, _datalen) \
+ for (element = (void *)(_data); \
+ (u8 *)(_data) + (_datalen) - (u8 *)element >= \
+ sizeof(*element) && \
+ (u8 *)(_data) + (_datalen) - (u8 *)element >= \
+ sizeof(*element) + element->datalen; \
+ element = (void *)(element->data + element->datalen))
+
+#define for_each_element_id(element, _id, data, datalen) \
+ for_each_element(element, data, datalen) \
+ if (element->id == (_id))
+
+#define for_each_element_extid(element, extid, data, datalen) \
+ for_each_element(element, data, datalen) \
+ if (element->id == WLAN_EID_EXTENSION && \
+ element->datalen > 0 && \
+ element->data[0] == (extid))
+
+#define for_each_subelement(sub, element) \
+ for_each_element(sub, (element)->data, (element)->datalen)
+
+#define for_each_subelement_id(sub, id, element) \
+ for_each_element_id(sub, id, (element)->data, (element)->datalen)
+
+#define for_each_subelement_extid(sub, extid, element) \
+ for_each_element_extid(sub, extid, (element)->data, (element)->datalen)
+
+/**
+ * for_each_element_completed - determine if element parsing consumed all data
+ * @element: element pointer after for_each_element() or friends
+ * @data: same data pointer as passed to for_each_element() or friends
+ * @datalen: same data length as passed to for_each_element() or friends
+ *
+ * This function returns %true if all the data was parsed or considered
+ * while walking the elements. Only use this if your for_each_element()
+ * loop cannot be broken out of, otherwise it always returns %false.
+ *
+ * If some data was malformed, this returns %false since the last parsed
+ * element will not fill the whole remaining data.
+ */
+static inline bool for_each_element_completed(const struct element *element,
+ const void *data, size_t datalen)
+{
+ return (u8 *)element == (u8 *)data + datalen;
+}
+
#endif /* LINUX_IEEE80211_H */
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 25/79] cfg80211: Use const more consistently in for_each_element macros
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (23 preceding siblings ...)
2019-10-16 21:49 ` [PATCH 4.4 24/79] cfg80211: add and use strongly typed element iteration macros Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 26/79] nl80211: validate beacon head Greg Kroah-Hartman
` (59 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jouni Malinen, Johannes Berg
From: Jouni Malinen <j@w1.fi>
commit 7388afe09143210f555bdd6c75035e9acc1fab96 upstream.
Enforce the first argument to be a correct type of a pointer to struct
element and avoid unnecessary typecasts from const to non-const pointers
(the change in validate_ie_attr() is needed to make this part work). In
addition, avoid signed/unsigned comparison within for_each_element() and
mark struct element packed just in case.
Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/ieee80211.h | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2554,16 +2554,16 @@ struct element {
u8 id;
u8 datalen;
u8 data[];
-};
+} __packed;
/* element iteration helpers */
-#define for_each_element(element, _data, _datalen) \
- for (element = (void *)(_data); \
- (u8 *)(_data) + (_datalen) - (u8 *)element >= \
- sizeof(*element) && \
- (u8 *)(_data) + (_datalen) - (u8 *)element >= \
- sizeof(*element) + element->datalen; \
- element = (void *)(element->data + element->datalen))
+#define for_each_element(_elem, _data, _datalen) \
+ for (_elem = (const struct element *)(_data); \
+ (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \
+ (int)sizeof(*_elem) && \
+ (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \
+ (int)sizeof(*_elem) + _elem->datalen; \
+ _elem = (const struct element *)(_elem->data + _elem->datalen))
#define for_each_element_id(element, _id, data, datalen) \
for_each_element(element, data, datalen) \
@@ -2600,7 +2600,7 @@ struct element {
static inline bool for_each_element_completed(const struct element *element,
const void *data, size_t datalen)
{
- return (u8 *)element == (u8 *)data + datalen;
+ return (const u8 *)element == (const u8 *)data + datalen;
}
#endif /* LINUX_IEEE80211_H */
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 26/79] nl80211: validate beacon head
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (24 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 25/79] cfg80211: Use const more consistently in for_each_element macros Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 27/79] ASoC: sgtl5000: Improve VAG power and mute control Greg Kroah-Hartman
` (58 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johannes Berg
From: Johannes Berg <johannes.berg@intel.com>
commit f88eb7c0d002a67ef31aeb7850b42ff69abc46dc upstream.
We currently don't validate the beacon head, i.e. the header,
fixed part and elements that are to go in front of the TIM
element. This means that the variable elements there can be
malformed, e.g. have a length exceeding the buffer size, but
most downstream code from this assumes that this has already
been checked.
Add the necessary checks to the netlink policy.
Cc: stable@vger.kernel.org
Fixes: ed1b6cc7f80f ("cfg80211/nl80211: add beacon settings")
Link: https://lore.kernel.org/r/1569009255-I7ac7fbe9436e9d8733439eab8acbbd35e55c74ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/wireless/nl80211.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -210,6 +210,36 @@ cfg80211_get_dev_from_info(struct net *n
return __cfg80211_rdev_from_attrs(netns, info->attrs);
}
+static int validate_beacon_head(const struct nlattr *attr)
+{
+ const u8 *data = nla_data(attr);
+ unsigned int len = nla_len(attr);
+ const struct element *elem;
+ const struct ieee80211_mgmt *mgmt = (void *)data;
+ unsigned int fixedlen = offsetof(struct ieee80211_mgmt,
+ u.beacon.variable);
+
+ if (len < fixedlen)
+ goto err;
+
+ if (ieee80211_hdrlen(mgmt->frame_control) !=
+ offsetof(struct ieee80211_mgmt, u.beacon))
+ goto err;
+
+ data += fixedlen;
+ len -= fixedlen;
+
+ for_each_element(elem, data, len) {
+ /* nothing */
+ }
+
+ if (for_each_element_completed(elem, data, len))
+ return 0;
+
+err:
+ return -EINVAL;
+}
+
/* policy for the attributes */
static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
@@ -3214,6 +3244,11 @@ static int nl80211_parse_beacon(struct n
memset(bcn, 0, sizeof(*bcn));
if (attrs[NL80211_ATTR_BEACON_HEAD]) {
+ int ret = validate_beacon_head(attrs[NL80211_ATTR_BEACON_HEAD]);
+
+ if (ret)
+ return ret;
+
bcn->head = nla_data(attrs[NL80211_ATTR_BEACON_HEAD]);
bcn->head_len = nla_len(attrs[NL80211_ATTR_BEACON_HEAD]);
if (!bcn->head_len)
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 27/79] ASoC: sgtl5000: Improve VAG power and mute control
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (25 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 26/79] nl80211: validate beacon head Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 28/79] panic: ensure preemption is disabled during panic() Greg Kroah-Hartman
` (57 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleksandr Suvorov, Marcel Ziswiler,
Fabio Estevam, Cezary Rojewski, Mark Brown, Sasha Levin
From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
[ Upstream commit b1f373a11d25fc9a5f7679c9b85799fe09b0dc4a ]
VAG power control is improved to fit the manual [1]. This patch fixes as
minimum one bug: if customer muxes Headphone to Line-In right after boot,
the VAG power remains off that leads to poor sound quality from line-in.
I.e. after boot:
- Connect sound source to Line-In jack;
- Connect headphone to HP jack;
- Run following commands:
$ amixer set 'Headphone' 80%
$ amixer set 'Headphone Mux' LINE_IN
Change VAG power on/off control according to the following algorithm:
- turn VAG power ON on the 1st incoming event.
- keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
- turn VAG power OFF when there is the latest consumer's pre-down event
come.
- always delay after VAG power OFF to avoid pop.
- delay after VAG power ON if the initiative consumer is Line-In, this
prevents pop during line-in muxing.
According to the data sheet [1], to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Cc: stable@vger.kernel.org
Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/sgtl5000.c | 232 +++++++++++++++++++++++++++++++-----
1 file changed, 202 insertions(+), 30 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 549f853c40924..4808b70ec12cb 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -35,6 +35,13 @@
#define SGTL5000_DAP_REG_OFFSET 0x0100
#define SGTL5000_MAX_REG_OFFSET 0x013A
+/* Delay for the VAG ramp up */
+#define SGTL5000_VAG_POWERUP_DELAY 500 /* ms */
+/* Delay for the VAG ramp down */
+#define SGTL5000_VAG_POWERDOWN_DELAY 500 /* ms */
+
+#define SGTL5000_OUTPUTS_MUTE (SGTL5000_HP_MUTE | SGTL5000_LINE_OUT_MUTE)
+
/* default value of sgtl5000 registers */
static const struct reg_default sgtl5000_reg_defaults[] = {
{ SGTL5000_CHIP_DIG_POWER, 0x0000 },
@@ -129,6 +136,13 @@ enum sgtl5000_micbias_resistor {
SGTL5000_MICBIAS_8K = 8,
};
+enum {
+ HP_POWER_EVENT,
+ DAC_POWER_EVENT,
+ ADC_POWER_EVENT,
+ LAST_POWER_EVENT = ADC_POWER_EVENT
+};
+
/* sgtl5000 private structure in codec */
struct sgtl5000_priv {
int sysclk; /* sysclk rate */
@@ -141,8 +155,117 @@ struct sgtl5000_priv {
int revision;
u8 micbias_resistor;
u8 micbias_voltage;
+ u16 mute_state[LAST_POWER_EVENT + 1];
};
+static inline int hp_sel_input(struct snd_soc_component *component)
+{
+ unsigned int ana_reg = 0;
+
+ snd_soc_component_read(component, SGTL5000_CHIP_ANA_CTRL, &ana_reg);
+
+ return (ana_reg & SGTL5000_HP_SEL_MASK) >> SGTL5000_HP_SEL_SHIFT;
+}
+
+static inline u16 mute_output(struct snd_soc_component *component,
+ u16 mute_mask)
+{
+ unsigned int mute_reg = 0;
+
+ snd_soc_component_read(component, SGTL5000_CHIP_ANA_CTRL, &mute_reg);
+
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+ mute_mask, mute_mask);
+ return mute_reg;
+}
+
+static inline void restore_output(struct snd_soc_component *component,
+ u16 mute_mask, u16 mute_reg)
+{
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+ mute_mask, mute_reg);
+}
+
+static void vag_power_on(struct snd_soc_component *component, u32 source)
+{
+ unsigned int ana_reg = 0;
+
+ snd_soc_component_read(component, SGTL5000_CHIP_ANA_POWER, &ana_reg);
+
+ if (ana_reg & SGTL5000_VAG_POWERUP)
+ return;
+
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
+
+ /* When VAG powering on to get local loop from Line-In, the sleep
+ * is required to avoid loud pop.
+ */
+ if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN &&
+ source == HP_POWER_EVENT)
+ msleep(SGTL5000_VAG_POWERUP_DELAY);
+}
+
+static int vag_power_consumers(struct snd_soc_component *component,
+ u16 ana_pwr_reg, u32 source)
+{
+ int consumers = 0;
+
+ /* count dac/adc consumers unconditional */
+ if (ana_pwr_reg & SGTL5000_DAC_POWERUP)
+ consumers++;
+ if (ana_pwr_reg & SGTL5000_ADC_POWERUP)
+ consumers++;
+
+ /*
+ * If the event comes from HP and Line-In is selected,
+ * current action is 'DAC to be powered down'.
+ * As HP_POWERUP is not set when HP muxed to line-in,
+ * we need to keep VAG power ON.
+ */
+ if (source == HP_POWER_EVENT) {
+ if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN)
+ consumers++;
+ } else {
+ if (ana_pwr_reg & SGTL5000_HP_POWERUP)
+ consumers++;
+ }
+
+ return consumers;
+}
+
+static void vag_power_off(struct snd_soc_component *component, u32 source)
+{
+ unsigned int ana_pwr = SGTL5000_VAG_POWERUP;
+
+ snd_soc_component_read(component, SGTL5000_CHIP_ANA_POWER, &ana_pwr);
+
+ if (!(ana_pwr & SGTL5000_VAG_POWERUP))
+ return;
+
+ /*
+ * This function calls when any of VAG power consumers is disappearing.
+ * Thus, if there is more than one consumer at the moment, as minimum
+ * one consumer will definitely stay after the end of the current
+ * event.
+ * Don't clear VAG_POWERUP if 2 or more consumers of VAG present:
+ * - LINE_IN (for HP events) / HP (for DAC/ADC events)
+ * - DAC
+ * - ADC
+ * (the current consumer is disappearing right now)
+ */
+ if (vag_power_consumers(component, ana_pwr, source) >= 2)
+ return;
+
+ snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, 0);
+ /* In power down case, we need wait 400-1000 ms
+ * when VAG fully ramped down.
+ * As longer we wait, as smaller pop we've got.
+ */
+ msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+}
+
/*
* mic_bias power on/off share the same register bits with
* output impedance of mic bias, when power on mic bias, we
@@ -174,36 +297,46 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w,
return 0;
}
-/*
- * As manual described, ADC/DAC only works when VAG powerup,
- * So enabled VAG before ADC/DAC up.
- * In power down case, we need wait 400ms when vag fully ramped down.
- */
-static int power_vag_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
+static int vag_and_mute_control(struct snd_soc_component *component,
+ int event, int event_source)
{
- struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
- const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
+ static const u16 mute_mask[] = {
+ /*
+ * Mask for HP_POWER_EVENT.
+ * Muxing Headphones have to be wrapped with mute/unmute
+ * headphones only.
+ */
+ SGTL5000_HP_MUTE,
+ /*
+ * Masks for DAC_POWER_EVENT/ADC_POWER_EVENT.
+ * Muxing DAC or ADC block have to be wrapped with mute/unmute
+ * both headphones and line-out.
+ */
+ SGTL5000_OUTPUTS_MUTE,
+ SGTL5000_OUTPUTS_MUTE
+ };
+
+ struct sgtl5000_priv *sgtl5000 =
+ snd_soc_component_get_drvdata(component);
switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ sgtl5000->mute_state[event_source] =
+ mute_output(component, mute_mask[event_source]);
+ break;
case SND_SOC_DAPM_POST_PMU:
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
- SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
- msleep(400);
+ vag_power_on(component, event_source);
+ restore_output(component, mute_mask[event_source],
+ sgtl5000->mute_state[event_source]);
break;
-
case SND_SOC_DAPM_PRE_PMD:
- /*
- * Don't clear VAG_POWERUP, when both DAC and ADC are
- * operational to prevent inadvertently starving the
- * other one of them.
- */
- if ((snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER) &
- mask) != mask) {
- snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
- SGTL5000_VAG_POWERUP, 0);
- msleep(400);
- }
+ sgtl5000->mute_state[event_source] =
+ mute_output(component, mute_mask[event_source]);
+ vag_power_off(component, event_source);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ restore_output(component, mute_mask[event_source],
+ sgtl5000->mute_state[event_source]);
break;
default:
break;
@@ -212,6 +345,41 @@ static int power_vag_event(struct snd_soc_dapm_widget *w,
return 0;
}
+/*
+ * Mute Headphone when power it up/down.
+ * Control VAG power on HP power path.
+ */
+static int headphone_pga_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ return vag_and_mute_control(component, event, HP_POWER_EVENT);
+}
+
+/* As manual describes, ADC/DAC powering up/down requires
+ * to mute outputs to avoid pops.
+ * Control VAG power on ADC/DAC power path.
+ */
+static int adc_updown_depop(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ return vag_and_mute_control(component, event, ADC_POWER_EVENT);
+}
+
+static int dac_updown_depop(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ return vag_and_mute_control(component, event, DAC_POWER_EVENT);
+}
+
/* input sources for ADC */
static const char *adc_mux_text[] = {
"MIC_IN", "LINE_IN"
@@ -247,7 +415,10 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
mic_bias_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
+ headphone_pga_event,
+ SND_SOC_DAPM_PRE_POST_PMU |
+ SND_SOC_DAPM_PRE_POST_PMD),
SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
@@ -263,11 +434,12 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
0, SGTL5000_CHIP_DIG_POWER,
1, 0),
- SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
- SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
-
- SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event),
- SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event),
+ SND_SOC_DAPM_ADC_E("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0,
+ adc_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+ SND_SOC_DAPM_PRE_POST_PMD),
+ SND_SOC_DAPM_DAC_E("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0,
+ dac_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+ SND_SOC_DAPM_PRE_POST_PMD),
};
/* routes for sgtl5000 */
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 28/79] panic: ensure preemption is disabled during panic()
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (26 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 27/79] ASoC: sgtl5000: Improve VAG power and mute control Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 29/79] USB: rio500: Remove Rio 500 kernel driver Greg Kroah-Hartman
` (56 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Will Deacon, Xogium, Kees Cook,
Russell King, Ingo Molnar, Petr Mladek, Feng Tang, Andrew Morton,
Linus Torvalds
From: Will Deacon <will@kernel.org>
commit 20bb759a66be52cf4a9ddd17fddaf509e11490cd upstream.
Calling 'panic()' on a kernel with CONFIG_PREEMPT=y can leave the
calling CPU in an infinite loop, but with interrupts and preemption
enabled. From this state, userspace can continue to be scheduled,
despite the system being "dead" as far as the kernel is concerned.
This is easily reproducible on arm64 when booting with "nosmp" on the
command line; a couple of shell scripts print out a periodic "Ping"
message whilst another triggers a crash by writing to
/proc/sysrq-trigger:
| sysrq: Trigger a crash
| Kernel panic - not syncing: sysrq triggered crash
| CPU: 0 PID: 1 Comm: init Not tainted 5.2.15 #1
| Hardware name: linux,dummy-virt (DT)
| Call trace:
| dump_backtrace+0x0/0x148
| show_stack+0x14/0x20
| dump_stack+0xa0/0xc4
| panic+0x140/0x32c
| sysrq_handle_reboot+0x0/0x20
| __handle_sysrq+0x124/0x190
| write_sysrq_trigger+0x64/0x88
| proc_reg_write+0x60/0xa8
| __vfs_write+0x18/0x40
| vfs_write+0xa4/0x1b8
| ksys_write+0x64/0xf0
| __arm64_sys_write+0x14/0x20
| el0_svc_common.constprop.0+0xb0/0x168
| el0_svc_handler+0x28/0x78
| el0_svc+0x8/0xc
| Kernel Offset: disabled
| CPU features: 0x0002,24002004
| Memory Limit: none
| ---[ end Kernel panic - not syncing: sysrq triggered crash ]---
| Ping 2!
| Ping 1!
| Ping 1!
| Ping 2!
The issue can also be triggered on x86 kernels if CONFIG_SMP=n,
otherwise local interrupts are disabled in 'smp_send_stop()'.
Disable preemption in 'panic()' before re-enabling interrupts.
Link: http://lkml.kernel.org/r/20191002123538.22609-1-will@kernel.org
Link: https://lore.kernel.org/r/BX1W47JXPMR8.58IYW53H6M5N@dragonstone
Signed-off-by: Will Deacon <will@kernel.org>
Reported-by: Xogium <contact@xogium.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/panic.c | 1 +
1 file changed, 1 insertion(+)
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -84,6 +84,7 @@ void panic(const char *fmt, ...)
* after the panic_lock is acquired) from invoking panic again.
*/
local_irq_disable();
+ preempt_disable_notrace();
/*
* It's possible to come here directly from a panic-assertion and
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 29/79] USB: rio500: Remove Rio 500 kernel driver
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (27 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 28/79] panic: ensure preemption is disabled during panic() Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 30/79] USB: yurex: Dont retry on unexpected errors Greg Kroah-Hartman
` (55 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Cesar Miquel, Bastien Nocera
From: Bastien Nocera <hadess@hadess.net>
commit 015664d15270a112c2371d812f03f7c579b35a73 upstream.
The Rio500 kernel driver has not been used by Rio500 owners since 2001
not long after the rio500 project added support for a user-space USB stack
through the very first versions of usbdevfs and then libusb.
Support for the kernel driver was removed from the upstream utilities
in 2008:
https://gitlab.freedesktop.org/hadess/rio500/commit/943f624ab721eb8281c287650fcc9e2026f6f5db
Cc: Cesar Miquel <miquel@df.uba.ar>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/6251c17584d220472ce882a3d9c199c401a51a71.camel@hadess.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/usb/rio.txt | 138 --------
MAINTAINERS | 7
arch/arm/configs/badge4_defconfig | 1
arch/arm/configs/corgi_defconfig | 1
arch/arm/configs/s3c2410_defconfig | 1
arch/arm/configs/spitz_defconfig | 1
arch/mips/configs/mtx1_defconfig | 1
arch/mips/configs/rm200_defconfig | 1
drivers/usb/misc/Kconfig | 10
drivers/usb/misc/Makefile | 1
drivers/usb/misc/rio500.c | 578 -------------------------------------
drivers/usb/misc/rio500_usb.h | 37 --
12 files changed, 777 deletions(-)
--- a/Documentation/usb/rio.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-Copyright (C) 1999, 2000 Bruce Tenison
-Portions Copyright (C) 1999, 2000 David Nelson
-Thanks to David Nelson for guidance and the usage of the scanner.txt
-and scanner.c files to model our driver and this informative file.
-
-Mar. 2, 2000
-
-CHANGES
-
-- Initial Revision
-
-
-OVERVIEW
-
-This README will address issues regarding how to configure the kernel
-to access a RIO 500 mp3 player.
-Before I explain how to use this to access the Rio500 please be warned:
-
-W A R N I N G:
---------------
-
-Please note that this software is still under development. The authors
-are in no way responsible for any damage that may occur, no matter how
-inconsequential.
-
-It seems that the Rio has a problem when sending .mp3 with low batteries.
-I suggest when the batteries are low and you want to transfer stuff that you
-replace it with a fresh one. In my case, what happened is I lost two 16kb
-blocks (they are no longer usable to store information to it). But I don't
-know if that's normal or not; it could simply be a problem with the flash
-memory.
-
-In an extreme case, I left my Rio playing overnight and the batteries wore
-down to nothing and appear to have corrupted the flash memory. My RIO
-needed to be replaced as a result. Diamond tech support is aware of the
-problem. Do NOT allow your batteries to wear down to nothing before
-changing them. It appears RIO 500 firmware does not handle low battery
-power well at all.
-
-On systems with OHCI controllers, the kernel OHCI code appears to have
-power on problems with some chipsets. If you are having problems
-connecting to your RIO 500, try turning it on first and then plugging it
-into the USB cable.
-
-Contact information:
---------------------
-
- The main page for the project is hosted at sourceforge.net in the following
- URL: <http://rio500.sourceforge.net>. You can also go to the project's
- sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
- There is also a mailing list: rio500-users@lists.sourceforge.net
-
-Authors:
--------
-
-Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
-Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
-things work there. Bruce Tenison <btenison@dibbs.net> is adding support
-for .fon files and also does testing. The program will mostly sure be
-re-written and Pete Ikusz along with the rest will re-design it. I would
-also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
-with some important information regarding the communication with the Rio.
-
-ADDITIONAL INFORMATION and Userspace tools
-
-http://rio500.sourceforge.net/
-
-
-REQUIREMENTS
-
-A host with a USB port. Ideally, either a UHCI (Intel) or OHCI
-(Compaq and others) hardware port should work.
-
-A Linux development kernel (2.3.x) with USB support enabled or a
-backported version to linux-2.2.x. See http://www.linux-usb.org for
-more information on accomplishing this.
-
-A Linux kernel with RIO 500 support enabled.
-
-'lspci' which is only needed to determine the type of USB hardware
-available in your machine.
-
-CONFIGURATION
-
-Using `lspci -v`, determine the type of USB hardware available.
-
- If you see something like:
-
- USB Controller: ......
- Flags: .....
- I/O ports at ....
-
- Then you have a UHCI based controller.
-
- If you see something like:
-
- USB Controller: .....
- Flags: ....
- Memory at .....
-
- Then you have a OHCI based controller.
-
-Using `make menuconfig` or your preferred method for configuring the
-kernel, select 'Support for USB', 'OHCI/UHCI' depending on your
-hardware (determined from the steps above), 'USB Diamond Rio500 support', and
-'Preliminary USB device filesystem'. Compile and install the modules
-(you may need to execute `depmod -a` to update the module
-dependencies).
-
-Add a device for the USB rio500:
- `mknod /dev/usb/rio500 c 180 64`
-
-Set appropriate permissions for /dev/usb/rio500 (don't forget about
-group and world permissions). Both read and write permissions are
-required for proper operation.
-
-Load the appropriate modules (if compiled as modules):
-
- OHCI:
- modprobe usbcore
- modprobe usb-ohci
- modprobe rio500
-
- UHCI:
- modprobe usbcore
- modprobe usb-uhci (or uhci)
- modprobe rio500
-
-That's it. The Rio500 Utils at: http://rio500.sourceforge.net should
-be able to access the rio500.
-
-BUGS
-
-If you encounter any problems feel free to drop me an email.
-
-Bruce Tenison
-btenison@dibbs.net
-
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11100,13 +11100,6 @@ W: http://www.linux-usb.org/usbnet
S: Maintained
F: drivers/net/usb/dm9601.c
-USB DIAMOND RIO500 DRIVER
-M: Cesar Miquel <miquel@df.uba.ar>
-L: rio500-users@lists.sourceforge.net
-W: http://rio500.sourceforge.net
-S: Maintained
-F: drivers/usb/misc/rio500*
-
USB EHCI DRIVER
M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -97,7 +97,6 @@ CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_MSDOS_FS=y
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -207,7 +207,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -354,7 +354,6 @@ CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -202,7 +202,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -638,7 +638,6 @@ CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -351,7 +351,6 @@ CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -46,16 +46,6 @@ config USB_SEVSEG
To compile this driver as a module, choose M here: the
module will be called usbsevseg.
-config USB_RIO500
- tristate "USB Diamond Rio500 support"
- help
- Say Y here if you want to connect a USB Rio500 mp3 player to your
- computer's USB port. Please read <file:Documentation/usb/rio.txt>
- for more information.
-
- To compile this driver as a module, choose M here: the
- module will be called rio500.
-
config USB_LEGOTOWER
tristate "USB Lego Infrared Tower support"
help
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_USB_LCD) += usblcd.o
obj-$(CONFIG_USB_LD) += ldusb.o
obj-$(CONFIG_USB_LED) += usbled.o
obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o
-obj-$(CONFIG_USB_RIO500) += rio500.o
obj-$(CONFIG_USB_TEST) += usbtest.o
obj-$(CONFIG_USB_EHSET_TEST_FIXTURE) += ehset.o
obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o
--- a/drivers/usb/misc/rio500.c
+++ /dev/null
@@ -1,578 +0,0 @@
-/* -*- linux-c -*- */
-
-/*
- * Driver for USB Rio 500
- *
- * Cesar Miquel (miquel@df.uba.ar)
- *
- * based on hp_scanner.c by David E. Nelson (dnelson@jump.net)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee).
- *
- * Changelog:
- * 30/05/2003 replaced lock/unlock kernel with up/down
- * Daniele Bellucci bellucda@tiscali.it
- * */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/random.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/usb.h>
-#include <linux/wait.h>
-
-#include "rio500_usb.h"
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.1"
-#define DRIVER_AUTHOR "Cesar Miquel <miquel@df.uba.ar>"
-#define DRIVER_DESC "USB Rio 500 driver"
-
-#define RIO_MINOR 64
-
-/* stall/wait timeout for rio */
-#define NAK_TIMEOUT (HZ)
-
-#define IBUF_SIZE 0x1000
-
-/* Size of the rio buffer */
-#define OBUF_SIZE 0x10000
-
-struct rio_usb_data {
- struct usb_device *rio_dev; /* init: probe_rio */
- unsigned int ifnum; /* Interface number of the USB device */
- int isopen; /* nz if open */
- int present; /* Device is present on the bus */
- char *obuf, *ibuf; /* transfer buffers */
- char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */
- wait_queue_head_t wait_q; /* for timeouts */
- struct mutex lock; /* general race avoidance */
-};
-
-static DEFINE_MUTEX(rio500_mutex);
-static struct rio_usb_data rio_instance;
-
-static int open_rio(struct inode *inode, struct file *file)
-{
- struct rio_usb_data *rio = &rio_instance;
-
- /* against disconnect() */
- mutex_lock(&rio500_mutex);
- mutex_lock(&(rio->lock));
-
- if (rio->isopen || !rio->present) {
- mutex_unlock(&(rio->lock));
- mutex_unlock(&rio500_mutex);
- return -EBUSY;
- }
- rio->isopen = 1;
-
- init_waitqueue_head(&rio->wait_q);
-
- mutex_unlock(&(rio->lock));
-
- dev_info(&rio->rio_dev->dev, "Rio opened.\n");
- mutex_unlock(&rio500_mutex);
-
- return 0;
-}
-
-static int close_rio(struct inode *inode, struct file *file)
-{
- struct rio_usb_data *rio = &rio_instance;
-
- /* against disconnect() */
- mutex_lock(&rio500_mutex);
- mutex_lock(&(rio->lock));
-
- rio->isopen = 0;
- if (!rio->present) {
- /* cleanup has been delayed */
- kfree(rio->ibuf);
- kfree(rio->obuf);
- rio->ibuf = NULL;
- rio->obuf = NULL;
- } else {
- dev_info(&rio->rio_dev->dev, "Rio closed.\n");
- }
- mutex_unlock(&(rio->lock));
- mutex_unlock(&rio500_mutex);
- return 0;
-}
-
-static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct RioCommand rio_cmd;
- struct rio_usb_data *rio = &rio_instance;
- void __user *data;
- unsigned char *buffer;
- int result, requesttype;
- int retries;
- int retval=0;
-
- mutex_lock(&(rio->lock));
- /* Sanity check to make sure rio is connected, powered, etc */
- if (rio->present == 0 || rio->rio_dev == NULL) {
- retval = -ENODEV;
- goto err_out;
- }
-
- switch (cmd) {
- case RIO_RECV_COMMAND:
- data = (void __user *) arg;
- if (data == NULL)
- break;
- if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
- retval = -EFAULT;
- goto err_out;
- }
- if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
- retval = -EINVAL;
- goto err_out;
- }
- buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (buffer == NULL) {
- retval = -ENOMEM;
- goto err_out;
- }
- if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
- retval = -EFAULT;
- free_page((unsigned long) buffer);
- goto err_out;
- }
-
- requesttype = rio_cmd.requesttype | USB_DIR_IN |
- USB_TYPE_VENDOR | USB_RECIP_DEVICE;
- dev_dbg(&rio->rio_dev->dev,
- "sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
- requesttype, rio_cmd.request, rio_cmd.value,
- rio_cmd.index, rio_cmd.length);
- /* Send rio control message */
- retries = 3;
- while (retries) {
- result = usb_control_msg(rio->rio_dev,
- usb_rcvctrlpipe(rio-> rio_dev, 0),
- rio_cmd.request,
- requesttype,
- rio_cmd.value,
- rio_cmd.index, buffer,
- rio_cmd.length,
- jiffies_to_msecs(rio_cmd.timeout));
- if (result == -ETIMEDOUT)
- retries--;
- else if (result < 0) {
- dev_err(&rio->rio_dev->dev,
- "Error executing ioctrl. code = %d\n",
- result);
- retries = 0;
- } else {
- dev_dbg(&rio->rio_dev->dev,
- "Executed ioctl. Result = %d (data=%02x)\n",
- result, buffer[0]);
- if (copy_to_user(rio_cmd.buffer, buffer,
- rio_cmd.length)) {
- free_page((unsigned long) buffer);
- retval = -EFAULT;
- goto err_out;
- }
- retries = 0;
- }
-
- /* rio_cmd.buffer contains a raw stream of single byte
- data which has been returned from rio. Data is
- interpreted at application level. For data that
- will be cast to data types longer than 1 byte, data
- will be little_endian and will potentially need to
- be swapped at the app level */
-
- }
- free_page((unsigned long) buffer);
- break;
-
- case RIO_SEND_COMMAND:
- data = (void __user *) arg;
- if (data == NULL)
- break;
- if (copy_from_user(&rio_cmd, data, sizeof(struct RioCommand))) {
- retval = -EFAULT;
- goto err_out;
- }
- if (rio_cmd.length < 0 || rio_cmd.length > PAGE_SIZE) {
- retval = -EINVAL;
- goto err_out;
- }
- buffer = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (buffer == NULL) {
- retval = -ENOMEM;
- goto err_out;
- }
- if (copy_from_user(buffer, rio_cmd.buffer, rio_cmd.length)) {
- free_page((unsigned long)buffer);
- retval = -EFAULT;
- goto err_out;
- }
-
- requesttype = rio_cmd.requesttype | USB_DIR_OUT |
- USB_TYPE_VENDOR | USB_RECIP_DEVICE;
- dev_dbg(&rio->rio_dev->dev,
- "sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
- requesttype, rio_cmd.request, rio_cmd.value,
- rio_cmd.index, rio_cmd.length);
- /* Send rio control message */
- retries = 3;
- while (retries) {
- result = usb_control_msg(rio->rio_dev,
- usb_sndctrlpipe(rio-> rio_dev, 0),
- rio_cmd.request,
- requesttype,
- rio_cmd.value,
- rio_cmd.index, buffer,
- rio_cmd.length,
- jiffies_to_msecs(rio_cmd.timeout));
- if (result == -ETIMEDOUT)
- retries--;
- else if (result < 0) {
- dev_err(&rio->rio_dev->dev,
- "Error executing ioctrl. code = %d\n",
- result);
- retries = 0;
- } else {
- dev_dbg(&rio->rio_dev->dev,
- "Executed ioctl. Result = %d\n", result);
- retries = 0;
-
- }
-
- }
- free_page((unsigned long) buffer);
- break;
-
- default:
- retval = -ENOTTY;
- break;
- }
-
-
-err_out:
- mutex_unlock(&(rio->lock));
- return retval;
-}
-
-static ssize_t
-write_rio(struct file *file, const char __user *buffer,
- size_t count, loff_t * ppos)
-{
- DEFINE_WAIT(wait);
- struct rio_usb_data *rio = &rio_instance;
-
- unsigned long copy_size;
- unsigned long bytes_written = 0;
- unsigned int partial;
-
- int result = 0;
- int maxretry;
- int errn = 0;
- int intr;
-
- intr = mutex_lock_interruptible(&(rio->lock));
- if (intr)
- return -EINTR;
- /* Sanity check to make sure rio is connected, powered, etc */
- if (rio->present == 0 || rio->rio_dev == NULL) {
- mutex_unlock(&(rio->lock));
- return -ENODEV;
- }
-
-
-
- do {
- unsigned long thistime;
- char *obuf = rio->obuf;
-
- thistime = copy_size =
- (count >= OBUF_SIZE) ? OBUF_SIZE : count;
- if (copy_from_user(rio->obuf, buffer, copy_size)) {
- errn = -EFAULT;
- goto error;
- }
- maxretry = 5;
- while (thistime) {
- if (!rio->rio_dev) {
- errn = -ENODEV;
- goto error;
- }
- if (signal_pending(current)) {
- mutex_unlock(&(rio->lock));
- return bytes_written ? bytes_written : -EINTR;
- }
-
- result = usb_bulk_msg(rio->rio_dev,
- usb_sndbulkpipe(rio->rio_dev, 2),
- obuf, thistime, &partial, 5000);
-
- dev_dbg(&rio->rio_dev->dev,
- "write stats: result:%d thistime:%lu partial:%u\n",
- result, thistime, partial);
-
- if (result == -ETIMEDOUT) { /* NAK - so hold for a while */
- if (!maxretry--) {
- errn = -ETIME;
- goto error;
- }
- prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
- schedule_timeout(NAK_TIMEOUT);
- finish_wait(&rio->wait_q, &wait);
- continue;
- } else if (!result && partial) {
- obuf += partial;
- thistime -= partial;
- } else
- break;
- }
- if (result) {
- dev_err(&rio->rio_dev->dev, "Write Whoops - %x\n",
- result);
- errn = -EIO;
- goto error;
- }
- bytes_written += copy_size;
- count -= copy_size;
- buffer += copy_size;
- } while (count > 0);
-
- mutex_unlock(&(rio->lock));
-
- return bytes_written ? bytes_written : -EIO;
-
-error:
- mutex_unlock(&(rio->lock));
- return errn;
-}
-
-static ssize_t
-read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
-{
- DEFINE_WAIT(wait);
- struct rio_usb_data *rio = &rio_instance;
- ssize_t read_count;
- unsigned int partial;
- int this_read;
- int result;
- int maxretry = 10;
- char *ibuf;
- int intr;
-
- intr = mutex_lock_interruptible(&(rio->lock));
- if (intr)
- return -EINTR;
- /* Sanity check to make sure rio is connected, powered, etc */
- if (rio->present == 0 || rio->rio_dev == NULL) {
- mutex_unlock(&(rio->lock));
- return -ENODEV;
- }
-
- ibuf = rio->ibuf;
-
- read_count = 0;
-
-
- while (count > 0) {
- if (signal_pending(current)) {
- mutex_unlock(&(rio->lock));
- return read_count ? read_count : -EINTR;
- }
- if (!rio->rio_dev) {
- mutex_unlock(&(rio->lock));
- return -ENODEV;
- }
- this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
-
- result = usb_bulk_msg(rio->rio_dev,
- usb_rcvbulkpipe(rio->rio_dev, 1),
- ibuf, this_read, &partial,
- 8000);
-
- dev_dbg(&rio->rio_dev->dev,
- "read stats: result:%d this_read:%u partial:%u\n",
- result, this_read, partial);
-
- if (partial) {
- count = this_read = partial;
- } else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */
- if (!maxretry--) {
- mutex_unlock(&(rio->lock));
- dev_err(&rio->rio_dev->dev,
- "read_rio: maxretry timeout\n");
- return -ETIME;
- }
- prepare_to_wait(&rio->wait_q, &wait, TASK_INTERRUPTIBLE);
- schedule_timeout(NAK_TIMEOUT);
- finish_wait(&rio->wait_q, &wait);
- continue;
- } else if (result != -EREMOTEIO) {
- mutex_unlock(&(rio->lock));
- dev_err(&rio->rio_dev->dev,
- "Read Whoops - result:%u partial:%u this_read:%u\n",
- result, partial, this_read);
- return -EIO;
- } else {
- mutex_unlock(&(rio->lock));
- return (0);
- }
-
- if (this_read) {
- if (copy_to_user(buffer, ibuf, this_read)) {
- mutex_unlock(&(rio->lock));
- return -EFAULT;
- }
- count -= this_read;
- read_count += this_read;
- buffer += this_read;
- }
- }
- mutex_unlock(&(rio->lock));
- return read_count;
-}
-
-static const struct file_operations usb_rio_fops = {
- .owner = THIS_MODULE,
- .read = read_rio,
- .write = write_rio,
- .unlocked_ioctl = ioctl_rio,
- .open = open_rio,
- .release = close_rio,
- .llseek = noop_llseek,
-};
-
-static struct usb_class_driver usb_rio_class = {
- .name = "rio500%d",
- .fops = &usb_rio_fops,
- .minor_base = RIO_MINOR,
-};
-
-static int probe_rio(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(intf);
- struct rio_usb_data *rio = &rio_instance;
- int retval = 0;
-
- mutex_lock(&rio500_mutex);
- if (rio->present) {
- dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum);
- retval = -EBUSY;
- goto bail_out;
- } else {
- dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
- }
-
- retval = usb_register_dev(intf, &usb_rio_class);
- if (retval) {
- dev_err(&dev->dev,
- "Not able to get a minor for this device.\n");
- retval = -ENOMEM;
- goto bail_out;
- }
-
- rio->rio_dev = dev;
-
- if (!(rio->obuf = kmalloc(OBUF_SIZE, GFP_KERNEL))) {
- dev_err(&dev->dev,
- "probe_rio: Not enough memory for the output buffer\n");
- usb_deregister_dev(intf, &usb_rio_class);
- retval = -ENOMEM;
- goto bail_out;
- }
- dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
-
- if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) {
- dev_err(&dev->dev,
- "probe_rio: Not enough memory for the input buffer\n");
- usb_deregister_dev(intf, &usb_rio_class);
- kfree(rio->obuf);
- retval = -ENOMEM;
- goto bail_out;
- }
- dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
-
- mutex_init(&(rio->lock));
-
- usb_set_intfdata (intf, rio);
- rio->present = 1;
-bail_out:
- mutex_unlock(&rio500_mutex);
-
- return retval;
-}
-
-static void disconnect_rio(struct usb_interface *intf)
-{
- struct rio_usb_data *rio = usb_get_intfdata (intf);
-
- usb_set_intfdata (intf, NULL);
- mutex_lock(&rio500_mutex);
- if (rio) {
- usb_deregister_dev(intf, &usb_rio_class);
-
- mutex_lock(&(rio->lock));
- if (rio->isopen) {
- rio->isopen = 0;
- /* better let it finish - the release will do whats needed */
- rio->rio_dev = NULL;
- mutex_unlock(&(rio->lock));
- mutex_unlock(&rio500_mutex);
- return;
- }
- kfree(rio->ibuf);
- kfree(rio->obuf);
-
- dev_info(&intf->dev, "USB Rio disconnected.\n");
-
- rio->present = 0;
- mutex_unlock(&(rio->lock));
- }
- mutex_unlock(&rio500_mutex);
-}
-
-static const struct usb_device_id rio_table[] = {
- { USB_DEVICE(0x0841, 1) }, /* Rio 500 */
- { } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, rio_table);
-
-static struct usb_driver rio_driver = {
- .name = "rio500",
- .probe = probe_rio,
- .disconnect = disconnect_rio,
- .id_table = rio_table,
-};
-
-module_usb_driver(rio_driver);
-
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
-
--- a/drivers/usb/misc/rio500_usb.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* ----------------------------------------------------------------------
-
- Copyright (C) 2000 Cesar Miquel (miquel@df.uba.ar)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- ---------------------------------------------------------------------- */
-
-
-
-#define RIO_SEND_COMMAND 0x1
-#define RIO_RECV_COMMAND 0x2
-
-#define RIO_DIR_OUT 0x0
-#define RIO_DIR_IN 0x1
-
-struct RioCommand {
- short length;
- int request;
- int requesttype;
- int value;
- int index;
- void __user *buffer;
- int timeout;
-};
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 30/79] USB: yurex: Dont retry on unexpected errors
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (28 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 29/79] USB: rio500: Remove Rio 500 kernel driver Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 31/79] USB: yurex: fix NULL-derefs on disconnect Greg Kroah-Hartman
` (54 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alan Stern, Tomoki Sekiyama,
syzbot+b24d736f18a1541ad550
From: Alan Stern <stern@rowland.harvard.edu>
commit 32a0721c6620b77504916dac0cea8ad497c4878a upstream.
According to Greg KH, it has been generally agreed that when a USB
driver encounters an unknown error (or one it can't handle directly),
it should just give up instead of going into a potentially infinite
retry loop.
The three codes -EPROTO, -EILSEQ, and -ETIME fall into this category.
They can be caused by bus errors such as packet loss or corruption,
attempting to communicate with a disconnected device, or by malicious
firmware. Nowadays the extent of packet loss or corruption is
negligible, so it should be safe for a driver to give up whenever one
of these errors occurs.
Although the yurex driver handles -EILSEQ errors in this way, it
doesn't do the same for -EPROTO (as discovered by the syzbot fuzzer)
or other unrecognized errors. This patch adjusts the driver so that
it doesn't log an error message for -EPROTO or -ETIME, and it doesn't
retry after any errors.
Reported-and-tested-by: syzbot+b24d736f18a1541ad550@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1909171245410.1590-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/yurex.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -136,6 +136,7 @@ static void yurex_interrupt(struct urb *
switch (status) {
case 0: /*success*/
break;
+ /* The device is terminated or messed up, give up */
case -EOVERFLOW:
dev_err(&dev->interface->dev,
"%s - overflow with length %d, actual length is %d\n",
@@ -144,12 +145,13 @@ static void yurex_interrupt(struct urb *
case -ENOENT:
case -ESHUTDOWN:
case -EILSEQ:
- /* The device is terminated, clean up */
+ case -EPROTO:
+ case -ETIME:
return;
default:
dev_err(&dev->interface->dev,
"%s - unknown status received: %d\n", __func__, status);
- goto exit;
+ return;
}
/* handle received message */
@@ -181,7 +183,6 @@ static void yurex_interrupt(struct urb *
break;
}
-exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
if (retval) {
dev_err(&dev->interface->dev, "%s - usb_submit_urb failed: %d\n",
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 31/79] USB: yurex: fix NULL-derefs on disconnect
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (29 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 30/79] USB: yurex: Dont retry on unexpected errors Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 32/79] USB: usb-skeleton: fix runtime PM after driver unbind Greg Kroah-Hartman
` (53 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit aafb00a977cf7d81821f7c9d12e04c558c22dc3c upstream.
The driver was using its struct usb_interface pointer as an inverted
disconnected flag, but was setting it to NULL without making sure all
code paths that used it were done with it.
Before commit ef61eb43ada6 ("USB: yurex: Fix protection fault after
device removal") this included the interrupt-in completion handler, but
there are further accesses in dev_err and dev_dbg statements in
yurex_write() and the driver-data destructor (sic!).
Fix this by unconditionally stopping also the control URB at disconnect
and by using a dedicated disconnected flag.
Note that we need to take a reference to the struct usb_interface to
avoid a use-after-free in the destructor whenever the device was
disconnected while the character device was still open.
Fixes: aadd6472d904 ("USB: yurex.c: remove dbg() usage")
Fixes: 45714104b9e8 ("USB: yurex.c: remove err() usage")
Cc: stable <stable@vger.kernel.org> # 3.5: ef61eb43ada6
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009153848.8664-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/yurex.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -64,6 +64,7 @@ struct usb_yurex {
struct kref kref;
struct mutex io_mutex;
+ unsigned long disconnected:1;
struct fasync_struct *async_queue;
wait_queue_head_t waitq;
@@ -111,6 +112,7 @@ static void yurex_delete(struct kref *kr
dev->int_buffer, dev->urb->transfer_dma);
usb_free_urb(dev->urb);
}
+ usb_put_intf(dev->interface);
usb_put_dev(dev->udev);
kfree(dev);
}
@@ -211,7 +213,7 @@ static int yurex_probe(struct usb_interf
init_waitqueue_head(&dev->waitq);
dev->udev = usb_get_dev(interface_to_usbdev(interface));
- dev->interface = interface;
+ dev->interface = usb_get_intf(interface);
/* set up the endpoint information */
iface_desc = interface->cur_altsetting;
@@ -334,8 +336,9 @@ static void yurex_disconnect(struct usb_
/* prevent more I/O from starting */
usb_poison_urb(dev->urb);
+ usb_poison_urb(dev->cntl_urb);
mutex_lock(&dev->io_mutex);
- dev->interface = NULL;
+ dev->disconnected = 1;
mutex_unlock(&dev->io_mutex);
/* wakeup waiters */
@@ -423,7 +426,7 @@ static ssize_t yurex_read(struct file *f
dev = file->private_data;
mutex_lock(&dev->io_mutex);
- if (!dev->interface) { /* already disconnected */
+ if (dev->disconnected) { /* already disconnected */
mutex_unlock(&dev->io_mutex);
return -ENODEV;
}
@@ -458,7 +461,7 @@ static ssize_t yurex_write(struct file *
goto error;
mutex_lock(&dev->io_mutex);
- if (!dev->interface) { /* already disconnected */
+ if (dev->disconnected) { /* already disconnected */
mutex_unlock(&dev->io_mutex);
retval = -ENODEV;
goto error;
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 32/79] USB: usb-skeleton: fix runtime PM after driver unbind
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (30 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 31/79] USB: yurex: fix NULL-derefs on disconnect Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 33/79] USB: usb-skeleton: fix NULL-deref on disconnect Greg Kroah-Hartman
` (52 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 5c290a5e42c3387e82de86965784d30e6c5270fd upstream.
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.
Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.
Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191001084908.2003-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/usb-skeleton.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -75,6 +75,7 @@ static void skel_delete(struct kref *kre
struct usb_skel *dev = to_skel_dev(kref);
usb_free_urb(dev->bulk_in_urb);
+ usb_put_intf(dev->interface);
usb_put_dev(dev->udev);
kfree(dev->bulk_in_buffer);
kfree(dev);
@@ -126,10 +127,7 @@ static int skel_release(struct inode *in
return -ENODEV;
/* allow the device to be autosuspended */
- mutex_lock(&dev->io_mutex);
- if (dev->interface)
- usb_autopm_put_interface(dev->interface);
- mutex_unlock(&dev->io_mutex);
+ usb_autopm_put_interface(dev->interface);
/* decrement the count on our device */
kref_put(&dev->kref, skel_delete);
@@ -511,7 +509,7 @@ static int skel_probe(struct usb_interfa
init_waitqueue_head(&dev->bulk_in_wait);
dev->udev = usb_get_dev(interface_to_usbdev(interface));
- dev->interface = interface;
+ dev->interface = usb_get_intf(interface);
/* set up the endpoint information */
/* use only the first bulk-in and bulk-out endpoints */
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 33/79] USB: usb-skeleton: fix NULL-deref on disconnect
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (31 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 32/79] USB: usb-skeleton: fix runtime PM after driver unbind Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 34/79] xhci: Prevent device initiated U1/U2 link pm if exit latency is too long Greg Kroah-Hartman
` (51 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit bed5ef230943863b9abf5eae226a20fad9a8ff71 upstream.
The driver was using its struct usb_interface pointer as an inverted
disconnected flag and was setting it to NULL before making sure all
completion handlers had run. This could lead to NULL-pointer
dereferences in the dev_err() statements in the completion handlers
which relies on said pointer.
Fix this by using a dedicated disconnected flag.
Note that this is also addresses a NULL-pointer dereference at release()
and a struct usb_interface reference leak introduced by a recent runtime
PM fix, which depends on and should have been submitted together with
this patch.
Fixes: 4212cd74ca6f ("USB: usb-skeleton.c: remove err() usage")
Fixes: 5c290a5e42c3 ("USB: usb-skeleton: fix runtime PM after driver unbind")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009170944.30057-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/usb-skeleton.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -63,6 +63,7 @@ struct usb_skel {
spinlock_t err_lock; /* lock for errors */
struct kref kref;
struct mutex io_mutex; /* synchronize I/O with disconnect */
+ unsigned long disconnected:1;
wait_queue_head_t bulk_in_wait; /* to wait for an ongoing read */
};
#define to_skel_dev(d) container_of(d, struct usb_skel, kref)
@@ -239,7 +240,7 @@ static ssize_t skel_read(struct file *fi
if (rv < 0)
return rv;
- if (!dev->interface) { /* disconnect() was called */
+ if (dev->disconnected) { /* disconnect() was called */
rv = -ENODEV;
goto exit;
}
@@ -420,7 +421,7 @@ static ssize_t skel_write(struct file *f
/* this lock makes sure we don't submit URBs to gone devices */
mutex_lock(&dev->io_mutex);
- if (!dev->interface) { /* disconnect() was called */
+ if (dev->disconnected) { /* disconnect() was called */
mutex_unlock(&dev->io_mutex);
retval = -ENODEV;
goto error;
@@ -588,7 +589,7 @@ static void skel_disconnect(struct usb_i
/* prevent more I/O from starting */
mutex_lock(&dev->io_mutex);
- dev->interface = NULL;
+ dev->disconnected = 1;
mutex_unlock(&dev->io_mutex);
usb_kill_anchored_urbs(&dev->submitted);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 34/79] xhci: Prevent device initiated U1/U2 link pm if exit latency is too long
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (32 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 33/79] USB: usb-skeleton: fix NULL-deref on disconnect Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 35/79] xhci: Check all endpoints for LPM timeout Greg Kroah-Hartman
` (50 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jan Schmidt, Mathias Nyman
From: Mathias Nyman <mathias.nyman@linux.intel.com>
commit cd9d9491e835a845c1a98b8471f88d26285e0bb9 upstream.
If host/hub initiated link pm is prevented by a driver flag we still must
ensure that periodic endpoints have longer service intervals than link pm
exit latency before allowing device initiated link pm.
Fix this by continue walking and checking endpoint service interval if
xhci_get_timeout_no_hub_lpm() returns anything else than USB3_LPM_DISABLED
While at it fix the split line error message
Tested-by: Jan Schmidt <jan@centricular.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-3-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4645,10 +4645,12 @@ static u16 xhci_calculate_lpm_timeout(st
if (intf->dev.driver) {
driver = to_usb_driver(intf->dev.driver);
if (driver && driver->disable_hub_initiated_lpm) {
- dev_dbg(&udev->dev, "Hub-initiated %s disabled "
- "at request of driver %s\n",
- state_name, driver->name);
- return xhci_get_timeout_no_hub_lpm(udev, state);
+ dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n",
+ state_name, driver->name);
+ timeout = xhci_get_timeout_no_hub_lpm(udev,
+ state);
+ if (timeout == USB3_LPM_DISABLED)
+ return timeout;
}
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 35/79] xhci: Check all endpoints for LPM timeout
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (33 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 34/79] xhci: Prevent device initiated U1/U2 link pm if exit latency is too long Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 36/79] usb: xhci: wait for CNR controller not ready bit in xhci resume Greg Kroah-Hartman
` (49 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jan Schmidt, Philipp Zabel, Mathias Nyman
From: Jan Schmidt <jan@centricular.com>
commit d500c63f80f2ea08ee300e57da5f2af1c13875f5 upstream.
If an endpoint is encountered that returns USB3_LPM_DEVICE_INITIATED, keep
checking further endpoints, as there might be periodic endpoints later
that return USB3_LPM_DISABLED due to shorter service intervals.
Without this, the code can set too high a maximum-exit-latency and
prevent the use of multiple USB3 cameras that should be able to work.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Schmidt <jan@centricular.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-4-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4529,12 +4529,12 @@ static int xhci_update_timeout_for_endpo
alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev,
desc, state, timeout);
- /* If we found we can't enable hub-initiated LPM, or
+ /* If we found we can't enable hub-initiated LPM, and
* the U1 or U2 exit latency was too high to allow
- * device-initiated LPM as well, just stop searching.
+ * device-initiated LPM as well, then we will disable LPM
+ * for this device, so stop searching any further.
*/
- if (alt_timeout == USB3_LPM_DISABLED ||
- alt_timeout == USB3_LPM_DEVICE_INITIATED) {
+ if (alt_timeout == USB3_LPM_DISABLED) {
*timeout = alt_timeout;
return -E2BIG;
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 36/79] usb: xhci: wait for CNR controller not ready bit in xhci resume
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (34 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 35/79] xhci: Check all endpoints for LPM timeout Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 37/79] xhci: Increase STS_SAVE timeout in xhci_suspend() Greg Kroah-Hartman
` (48 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Rick Tseng, Mathias Nyman
From: Rick Tseng <rtseng@nvidia.com>
commit a70bcbc322837eda1ab5994d12db941dc9733a7d upstream.
NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold.
Thus we need to wait for CNR bit to clear in xhci resume, just as in
xhci init.
[Minor changes to comment and commit message -Mathias]
Cc: <stable@vger.kernel.org>
Signed-off-by: Rick Tseng <rtseng@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-6-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1041,6 +1041,18 @@ int xhci_resume(struct xhci_hcd *xhci, b
hibernated = true;
if (!hibernated) {
+ /*
+ * Some controllers might lose power during suspend, so wait
+ * for controller not ready bit to clear, just as in xHC init.
+ */
+ retval = xhci_handshake(&xhci->op_regs->status,
+ STS_CNR, 0, 10 * 1000 * 1000);
+ if (retval) {
+ xhci_warn(xhci, "Controller not ready at resume %d\n",
+ retval);
+ spin_unlock_irq(&xhci->lock);
+ return retval;
+ }
/* step 1: restore register */
xhci_restore_registers(xhci);
/* step 2: initialize command ring buffer */
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 37/79] xhci: Increase STS_SAVE timeout in xhci_suspend()
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (35 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 36/79] usb: xhci: wait for CNR controller not ready bit in xhci resume Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 38/79] USB: adutux: remove redundant variable minor Greg Kroah-Hartman
` (47 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kai-Heng Feng, Mathias Nyman
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
commit ac343366846a445bb81f0a0e8f16abb8bd5d5d88 upstream.
After commit f7fac17ca925 ("xhci: Convert xhci_handshake() to use
readl_poll_timeout_atomic()"), ASMedia xHCI may fail to suspend.
Although the algorithms are essentially the same, the old max timeout is
(usec + usec * time of doing readl()), and the new max timeout is just
usec, which is much less than the old one.
Increase the timeout to make ASMedia xHCI able to suspend again.
BugLink: https://bugs.launchpad.net/bugs/1844021
Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-8-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -981,7 +981,7 @@ int xhci_suspend(struct xhci_hcd *xhci,
command |= CMD_CSS;
writel(command, &xhci->op_regs->command);
if (xhci_handshake(&xhci->op_regs->status,
- STS_SAVE, 0, 10 * 1000)) {
+ STS_SAVE, 0, 20 * 1000)) {
xhci_warn(xhci, "WARN: xHC save state timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 38/79] USB: adutux: remove redundant variable minor
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (36 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 37/79] xhci: Increase STS_SAVE timeout in xhci_suspend() Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 39/79] USB: adutux: fix use-after-free on disconnect Greg Kroah-Hartman
` (46 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Colin Ian King
From: Colin Ian King <colin.king@canonical.com>
commit 8444efc4a052332d643ed5c8aebcca148c7de032 upstream.
Variable minor is being assigned but never read, hence it is redundant
and can be removed. Cleans up clang warning:
drivers/usb/misc/adutux.c:770:2: warning: Value stored to 'minor' is
never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/adutux.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -800,13 +800,11 @@ error:
static void adu_disconnect(struct usb_interface *interface)
{
struct adu_device *dev;
- int minor;
dev = usb_get_intfdata(interface);
mutex_lock(&dev->mtx); /* not interruptible */
dev->udev = NULL; /* poison */
- minor = dev->minor;
usb_deregister_dev(interface, &adu_class);
mutex_unlock(&dev->mtx);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 39/79] USB: adutux: fix use-after-free on disconnect
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (37 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 38/79] USB: adutux: remove redundant variable minor Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 40/79] USB: adutux: fix NULL-derefs " Greg Kroah-Hartman
` (45 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+0243cb250a51eeefb8cc, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 44efc269db7929f6275a1fa927ef082e533ecde0 upstream.
The driver was clearing its struct usb_device pointer, which it used as
an inverted disconnected flag, before deregistering the character device
and without serialising against racing release().
This could lead to a use-after-free if a racing release() callback
observes the cleared pointer and frees the driver data before
disconnect() is finished with it.
This could also lead to NULL-pointer dereferences in a racing open().
Fixes: f08812d5eb8f ("USB: FIx locks and urb->status in adutux (updated)")
Cc: stable <stable@vger.kernel.org> # 2.6.24
Reported-by: syzbot+0243cb250a51eeefb8cc@syzkaller.appspotmail.com
Tested-by: syzbot+0243cb250a51eeefb8cc@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190925092913.8608-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/adutux.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -803,14 +803,15 @@ static void adu_disconnect(struct usb_in
dev = usb_get_intfdata(interface);
- mutex_lock(&dev->mtx); /* not interruptible */
- dev->udev = NULL; /* poison */
usb_deregister_dev(interface, &adu_class);
- mutex_unlock(&dev->mtx);
mutex_lock(&adutux_mutex);
usb_set_intfdata(interface, NULL);
+ mutex_lock(&dev->mtx); /* not interruptible */
+ dev->udev = NULL; /* poison */
+ mutex_unlock(&dev->mtx);
+
/* if the device is not opened, then we clean up right now */
if (!dev->open_count)
adu_delete(dev);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 40/79] USB: adutux: fix NULL-derefs on disconnect
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (38 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 39/79] USB: adutux: fix use-after-free on disconnect Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 41/79] USB: adutux: fix use-after-free on release Greg Kroah-Hartman
` (44 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit b2fa7baee744fde746c17bc1860b9c6f5c2eebb7 upstream.
The driver was using its struct usb_device pointer as an inverted
disconnected flag, but was setting it to NULL before making sure all
completion handlers had run. This could lead to a NULL-pointer
dereference in a number of dev_dbg statements in the completion handlers
which relies on said pointer.
The pointer was also dereferenced unconditionally in a dev_dbg statement
release() something which would lead to a NULL-deref whenever a device
was disconnected before the final character-device close if debugging
was enabled.
Fix this by unconditionally stopping all I/O and preventing
resubmissions by poisoning the interrupt URBs at disconnect and using a
dedicated disconnected flag.
This also makes sure that all I/O has completed by the time the
disconnect callback returns.
Fixes: 1ef37c6047fe ("USB: adutux: remove custom debug macro and module parameter")
Fixes: 66d4bc30d128 ("USB: adutux: remove custom debug macro")
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190925092913.8608-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/adutux.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -80,6 +80,7 @@ struct adu_device {
char serial_number[8];
int open_count; /* number of times this port has been opened */
+ unsigned long disconnected:1;
char *read_buffer_primary;
int read_buffer_length;
@@ -121,7 +122,7 @@ static void adu_abort_transfers(struct a
{
unsigned long flags;
- if (dev->udev == NULL)
+ if (dev->disconnected)
return;
/* shutdown transfer */
@@ -244,7 +245,7 @@ static int adu_open(struct inode *inode,
}
dev = usb_get_intfdata(interface);
- if (!dev || !dev->udev) {
+ if (!dev) {
retval = -ENODEV;
goto exit_no_device;
}
@@ -327,7 +328,7 @@ static int adu_release(struct inode *ino
}
adu_release_internal(dev);
- if (dev->udev == NULL) {
+ if (dev->disconnected) {
/* the device was unplugged before the file was released */
if (!dev->open_count) /* ... and we're the last user */
adu_delete(dev);
@@ -356,7 +357,7 @@ static ssize_t adu_read(struct file *fil
return -ERESTARTSYS;
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
pr_err("No device or device unplugged %d\n", retval);
goto exit;
@@ -525,7 +526,7 @@ static ssize_t adu_write(struct file *fi
goto exit_nolock;
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
pr_err("No device or device unplugged %d\n", retval);
goto exit;
@@ -805,11 +806,14 @@ static void adu_disconnect(struct usb_in
usb_deregister_dev(interface, &adu_class);
+ usb_poison_urb(dev->interrupt_in_urb);
+ usb_poison_urb(dev->interrupt_out_urb);
+
mutex_lock(&adutux_mutex);
usb_set_intfdata(interface, NULL);
mutex_lock(&dev->mtx); /* not interruptible */
- dev->udev = NULL; /* poison */
+ dev->disconnected = 1;
mutex_unlock(&dev->mtx);
/* if the device is not opened, then we clean up right now */
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 41/79] USB: adutux: fix use-after-free on release
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (39 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 40/79] USB: adutux: fix NULL-derefs " Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 42/79] USB: iowarrior: fix use-after-free on disconnect Greg Kroah-Hartman
` (43 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 123a0f125fa3d2104043697baa62899d9e549272 upstream.
The driver was accessing its struct usb_device in its release()
callback without holding a reference. This would lead to a
use-after-free whenever the device was disconnected while the character
device was still open.
Fixes: 66d4bc30d128 ("USB: adutux: remove custom debug macro")
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009153848.8664-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/adutux.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -152,6 +152,7 @@ static void adu_delete(struct adu_device
kfree(dev->read_buffer_secondary);
kfree(dev->interrupt_in_buffer);
kfree(dev->interrupt_out_buffer);
+ usb_put_dev(dev->udev);
kfree(dev);
}
@@ -681,7 +682,7 @@ static int adu_probe(struct usb_interfac
mutex_init(&dev->mtx);
spin_lock_init(&dev->buflock);
- dev->udev = udev;
+ dev->udev = usb_get_dev(udev);
init_waitqueue_head(&dev->read_wait);
init_waitqueue_head(&dev->write_wait);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 42/79] USB: iowarrior: fix use-after-free on disconnect
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (40 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 41/79] USB: adutux: fix use-after-free on release Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 43/79] USB: iowarrior: fix use-after-free on release Greg Kroah-Hartman
` (42 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+0761012cebf7bdb38137, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit edc4746f253d907d048de680a621e121517f484b upstream.
A recent fix addressing a deadlock on disconnect introduced a new bug
by moving the present flag out of the critical section protected by the
driver-data mutex. This could lead to a racing release() freeing the
driver data before disconnect() is done with it.
Due to insufficient locking a related use-after-free could be triggered
also before the above mentioned commit. Specifically, the driver needs
to hold the driver-data mutex also while checking the opened flag at
disconnect().
Fixes: c468a8aa790e ("usb: iowarrior: fix deadlock on disconnect")
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Cc: stable <stable@vger.kernel.org> # 2.6.21
Reported-by: syzbot+0761012cebf7bdb38137@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009104846.5925-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/iowarrior.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -898,8 +898,6 @@ static void iowarrior_disconnect(struct
dev = usb_get_intfdata(interface);
mutex_lock(&iowarrior_open_disc_lock);
usb_set_intfdata(interface, NULL);
- /* prevent device read, write and ioctl */
- dev->present = 0;
minor = dev->minor;
mutex_unlock(&iowarrior_open_disc_lock);
@@ -910,8 +908,7 @@ static void iowarrior_disconnect(struct
mutex_lock(&dev->mutex);
/* prevent device read, write and ioctl */
-
- mutex_unlock(&dev->mutex);
+ dev->present = 0;
if (dev->opened) {
/* There is a process that holds a filedescriptor to the device ,
@@ -921,8 +918,10 @@ static void iowarrior_disconnect(struct
usb_kill_urb(dev->int_in_urb);
wake_up_interruptible(&dev->read_wait);
wake_up_interruptible(&dev->write_wait);
+ mutex_unlock(&dev->mutex);
} else {
/* no process is using the device, cleanup now */
+ mutex_unlock(&dev->mutex);
iowarrior_delete(dev);
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 43/79] USB: iowarrior: fix use-after-free on release
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (41 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 42/79] USB: iowarrior: fix use-after-free on disconnect Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 44/79] USB: iowarrior: fix use-after-free after driver unbind Greg Kroah-Hartman
` (41 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 80cd5479b525093a56ef768553045741af61b250 upstream.
The driver was accessing its struct usb_interface from its release()
callback without holding a reference. This would lead to a
use-after-free whenever debugging was enabled and the device was
disconnected while its character device was open.
Fixes: 549e83500b80 ("USB: iowarrior: Convert local dbg macro to dev_dbg")
Cc: stable <stable@vger.kernel.org> # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009104846.5925-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/iowarrior.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -248,6 +248,7 @@ static inline void iowarrior_delete(stru
kfree(dev->int_in_buffer);
usb_free_urb(dev->int_in_urb);
kfree(dev->read_queue);
+ usb_put_intf(dev->interface);
kfree(dev);
}
@@ -782,7 +783,7 @@ static int iowarrior_probe(struct usb_in
init_waitqueue_head(&dev->write_wait);
dev->udev = udev;
- dev->interface = interface;
+ dev->interface = usb_get_intf(interface);
iface_desc = interface->cur_altsetting;
dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 44/79] USB: iowarrior: fix use-after-free after driver unbind
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (42 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 43/79] USB: iowarrior: fix use-after-free on release Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 45/79] USB: usblp: fix runtime PM " Greg Kroah-Hartman
` (40 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit b5f8d46867ca233d773408ffbe691a8062ed718f upstream.
Make sure to stop also the asynchronous write URBs on disconnect() to
avoid use-after-free in the completion handler after driver unbind.
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Cc: stable <stable@vger.kernel.org> # 2.6.21: 51a2f077c44e ("USB: introduce usb_anchor")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009104846.5925-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/iowarrior.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -89,6 +89,7 @@ struct iowarrior {
char chip_serial[9]; /* the serial number string of the chip connected */
int report_size; /* number of bytes in a report */
u16 product_id;
+ struct usb_anchor submitted;
};
/*--------------*/
@@ -437,11 +438,13 @@ static ssize_t iowarrior_write(struct fi
retval = -EFAULT;
goto error;
}
+ usb_anchor_urb(int_out_urb, &dev->submitted);
retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
if (retval) {
dev_dbg(&dev->interface->dev,
"submit error %d for urb nr.%d\n",
retval, atomic_read(&dev->write_busy));
+ usb_unanchor_urb(int_out_urb);
goto error;
}
/* submit was ok */
@@ -788,6 +791,8 @@ static int iowarrior_probe(struct usb_in
iface_desc = interface->cur_altsetting;
dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
+ init_usb_anchor(&dev->submitted);
+
/* set up the endpoint information */
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
@@ -917,6 +922,7 @@ static void iowarrior_disconnect(struct
Deleting the device is postponed until close() was called.
*/
usb_kill_urb(dev->int_in_urb);
+ usb_kill_anchored_urbs(&dev->submitted);
wake_up_interruptible(&dev->read_wait);
wake_up_interruptible(&dev->write_wait);
mutex_unlock(&dev->mutex);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 45/79] USB: usblp: fix runtime PM after driver unbind
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (43 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 44/79] USB: iowarrior: fix use-after-free after driver unbind Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 46/79] USB: chaoskey: fix use-after-free on release Greg Kroah-Hartman
` (39 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 9a31535859bfd8d1c3ed391f5e9247cd87bb7909 upstream.
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.
Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.
Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191001084908.2003-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/class/usblp.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -474,10 +474,12 @@ static int usblp_release(struct inode *i
mutex_lock(&usblp_mutex);
usblp->used = 0;
- if (usblp->present) {
+ if (usblp->present)
usblp_unlink_urbs(usblp);
- usb_autopm_put_interface(usblp->intf);
- } else /* finish cleanup from disconnect */
+
+ usb_autopm_put_interface(usblp->intf);
+
+ if (!usblp->present) /* finish cleanup from disconnect */
usblp_cleanup(usblp);
mutex_unlock(&usblp_mutex);
return 0;
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 46/79] USB: chaoskey: fix use-after-free on release
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (44 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 45/79] USB: usblp: fix runtime PM " Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 47/79] USB: ldusb: fix NULL-derefs on driver unbind Greg Kroah-Hartman
` (38 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 93ddb1f56ae102f14f9e46a9a9c8017faa970003 upstream.
The driver was accessing its struct usb_interface in its release()
callback without holding a reference. This would lead to a
use-after-free whenever the device was disconnected while the character
device was still open.
Fixes: 66e3e591891d ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Cc: stable <stable@vger.kernel.org> # 4.1
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009153848.8664-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/chaoskey.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/usb/misc/chaoskey.c
+++ b/drivers/usb/misc/chaoskey.c
@@ -96,6 +96,7 @@ static void chaoskey_free(struct chaoske
usb_dbg(dev->interface, "free");
kfree(dev->name);
kfree(dev->buf);
+ usb_put_intf(dev->interface);
kfree(dev);
}
@@ -144,6 +145,8 @@ static int chaoskey_probe(struct usb_int
if (dev == NULL)
return -ENOMEM;
+ dev->interface = usb_get_intf(interface);
+
dev->buf = kmalloc(size, GFP_KERNEL);
if (dev->buf == NULL) {
@@ -169,8 +172,6 @@ static int chaoskey_probe(struct usb_int
strcat(dev->name, udev->serial);
}
- dev->interface = interface;
-
dev->in_ep = in_ep;
dev->size = size;
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 47/79] USB: ldusb: fix NULL-derefs on driver unbind
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (45 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 46/79] USB: chaoskey: fix use-after-free on release Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 48/79] serial: uartlite: fix exit path null pointer Greg Kroah-Hartman
` (37 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 58ecf131e74620305175a7aa103f81350bb37570 upstream.
The driver was using its struct usb_interface pointer as an inverted
disconnected flag, but was setting it to NULL before making sure all
completion handlers had run. This could lead to a NULL-pointer
dereference in a number of dev_dbg, dev_warn and dev_err statements in
the completion handlers which relies on said pointer.
Fix this by unconditionally stopping all I/O and preventing
resubmissions by poisoning the interrupt URBs at disconnect and using a
dedicated disconnected flag.
This also makes sure that all I/O has completed by the time the
disconnect callback returns.
Fixes: 2824bd250f0b ("[PATCH] USB: add ldusb driver")
Cc: stable <stable@vger.kernel.org> # 2.6.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009153848.8664-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/ldusb.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -158,6 +158,7 @@ MODULE_PARM_DESC(min_interrupt_out_inter
struct ld_usb {
struct mutex mutex; /* locks this structure */
struct usb_interface* intf; /* save off the usb interface pointer */
+ unsigned long disconnected:1;
int open_count; /* number of times this port has been opened */
@@ -197,12 +198,10 @@ static void ld_usb_abort_transfers(struc
/* shutdown transfer */
if (dev->interrupt_in_running) {
dev->interrupt_in_running = 0;
- if (dev->intf)
- usb_kill_urb(dev->interrupt_in_urb);
+ usb_kill_urb(dev->interrupt_in_urb);
}
if (dev->interrupt_out_busy)
- if (dev->intf)
- usb_kill_urb(dev->interrupt_out_urb);
+ usb_kill_urb(dev->interrupt_out_urb);
}
/**
@@ -210,8 +209,6 @@ static void ld_usb_abort_transfers(struc
*/
static void ld_usb_delete(struct ld_usb *dev)
{
- ld_usb_abort_transfers(dev);
-
/* free data structures */
usb_free_urb(dev->interrupt_in_urb);
usb_free_urb(dev->interrupt_out_urb);
@@ -267,7 +264,7 @@ static void ld_usb_interrupt_in_callback
resubmit:
/* resubmit if we're still running */
- if (dev->interrupt_in_running && !dev->buffer_overflow && dev->intf) {
+ if (dev->interrupt_in_running && !dev->buffer_overflow) {
retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
if (retval) {
dev_err(&dev->intf->dev,
@@ -396,7 +393,7 @@ static int ld_usb_release(struct inode *
retval = -ENODEV;
goto unlock_exit;
}
- if (dev->intf == NULL) {
+ if (dev->disconnected) {
/* the device was unplugged before the file was released */
mutex_unlock(&dev->mutex);
/* unlock here as ld_usb_delete frees dev */
@@ -427,7 +424,7 @@ static unsigned int ld_usb_poll(struct f
dev = file->private_data;
- if (!dev->intf)
+ if (dev->disconnected)
return POLLERR | POLLHUP;
poll_wait(file, &dev->read_wait, wait);
@@ -466,7 +463,7 @@ static ssize_t ld_usb_read(struct file *
}
/* verify that the device wasn't unplugged */
- if (dev->intf == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
goto unlock_exit;
@@ -546,7 +543,7 @@ static ssize_t ld_usb_write(struct file
}
/* verify that the device wasn't unplugged */
- if (dev->intf == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
goto unlock_exit;
@@ -782,6 +779,9 @@ static void ld_usb_disconnect(struct usb
/* give back our minor */
usb_deregister_dev(intf, &ld_usb_class);
+ usb_poison_urb(dev->interrupt_in_urb);
+ usb_poison_urb(dev->interrupt_out_urb);
+
mutex_lock(&dev->mutex);
/* if the device is not opened, then we clean up right now */
@@ -789,7 +789,7 @@ static void ld_usb_disconnect(struct usb
mutex_unlock(&dev->mutex);
ld_usb_delete(dev);
} else {
- dev->intf = NULL;
+ dev->disconnected = 1;
/* wake up pollers */
wake_up_interruptible_all(&dev->read_wait);
wake_up_interruptible_all(&dev->write_wait);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 48/79] serial: uartlite: fix exit path null pointer
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (46 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 47/79] USB: ldusb: fix NULL-derefs on driver unbind Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 49/79] USB: serial: keyspan: fix NULL-derefs on open() and write() Greg Kroah-Hartman
` (36 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Peter Korsgaard
From: Randy Dunlap <rdunlap@infradead.org>
commit a553add0846f355a28ed4e81134012e4a1e280c2 upstream.
Call uart_unregister_driver() conditionally instead of
unconditionally, only if it has been previously registered.
This uses driver.state, just as the sh-sci.c driver does.
Fixes this null pointer dereference in tty_unregister_driver(),
since the 'driver' argument is null:
general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:tty_unregister_driver+0x25/0x1d0
Fixes: 238b8721a554 ("[PATCH] serial uartlite driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Link: https://lore.kernel.org/r/9c8e6581-6fcc-a595-0897-4d90f5d710df@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/uartlite.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -701,7 +701,8 @@ err_uart:
static void __exit ulite_exit(void)
{
platform_driver_unregister(&ulite_platform_driver);
- uart_unregister_driver(&ulite_uart_driver);
+ if (ulite_uart_driver.state)
+ uart_unregister_driver(&ulite_uart_driver);
}
module_init(ulite_init);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 49/79] USB: serial: keyspan: fix NULL-derefs on open() and write()
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (47 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 48/79] serial: uartlite: fix exit path null pointer Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 50/79] USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20 Greg Kroah-Hartman
` (35 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 7d7e21fafdbc7fcf0854b877bd0975b487ed2717 upstream.
Fix NULL-pointer dereferences on open() and write() which can be
triggered by a malicious USB device.
The current URB allocation helper would fail to initialise the newly
allocated URB if the device has unexpected endpoint descriptors,
something which could lead NULL-pointer dereferences in a number of
open() and write() paths when accessing the URB. For example:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:usb_clear_halt+0x11/0xc0
...
Call Trace:
? tty_port_open+0x4d/0xd0
keyspan_open+0x70/0x160 [keyspan]
serial_port_activate+0x5b/0x80 [usbserial]
tty_port_open+0x7b/0xd0
? check_tty_count+0x43/0xa0
tty_open+0xf1/0x490
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:keyspan_write+0x14e/0x1f3 [keyspan]
...
Call Trace:
serial_write+0x43/0xa0 [usbserial]
n_tty_write+0x1af/0x4f0
? do_wait_intr_irq+0x80/0x80
? process_echoes+0x60/0x60
tty_write+0x13f/0x2f0
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:keyspan_usa26_send_setup+0x298/0x305 [keyspan]
...
Call Trace:
keyspan_open+0x10f/0x160 [keyspan]
serial_port_activate+0x5b/0x80 [usbserial]
tty_port_open+0x7b/0xd0
? check_tty_count+0x43/0xa0
tty_open+0xf1/0x490
Fixes: fdcba53e2d58 ("fix for bugzilla #7544 (keyspan USB-to-serial converter)")
Cc: stable <stable@vger.kernel.org> # 2.6.21
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/keyspan.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1249,8 +1249,8 @@ static struct urb *keyspan_setup_urb(str
ep_desc = find_ep(serial, endpoint);
if (!ep_desc) {
- /* leak the urb, something's wrong and the callers don't care */
- return urb;
+ usb_free_urb(urb);
+ return NULL;
}
if (usb_endpoint_xfer_int(ep_desc)) {
ep_type_name = "INT";
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 50/79] USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (48 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 49/79] USB: serial: keyspan: fix NULL-derefs on open() and write() Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 51/79] USB: serial: option: add Telit FN980 compositions Greg Kroah-Hartman
` (34 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Beni Mahler, Johan Hovold
From: Beni Mahler <beni.mahler@gmx.net>
commit 357f16d9e0194cdbc36531ff88b453481560b76a upstream.
Both devices added here have a FTDI chip inside. The device from Echelon
is called 'Network Interface' it is actually a LON network gateway.
ID 0403:8348 Future Technology Devices International, Ltd
https://www.eltako.com/fileadmin/downloads/de/datenblatt/Datenblatt_PL-SW-PROF.pdf
ID 0920:7500 Network Interface
https://www.echelon.com/products/u20-usb-network-interface
Signed-off-by: Beni Mahler <beni.mahler@gmx.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ftdi_sio.c | 3 +++
drivers/usb/serial/ftdi_sio_ids.h | 9 +++++++++
2 files changed, 12 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1025,6 +1025,9 @@ static const struct usb_device_id id_tab
/* EZPrototypes devices */
{ USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
{ USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, UNJO_ISODEBUG_V1_PID, 1) },
+ /* Sienna devices */
+ { USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) },
+ { USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) },
{ } /* Terminating entry */
};
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -38,6 +38,9 @@
#define FTDI_LUMEL_PD12_PID 0x6002
+/* Sienna Serial Interface by Secyourit GmbH */
+#define FTDI_SIENNA_PID 0x8348
+
/* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */
#define CYBER_CORTEX_AV_PID 0x8698
@@ -688,6 +691,12 @@
#define BANDB_ZZ_PROG1_USB_PID 0xBA02
/*
+ * Echelon USB Serial Interface
+ */
+#define ECHELON_VID 0x0920
+#define ECHELON_U20_PID 0x7500
+
+/*
* Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
*/
#define INTREPID_VID 0x093C
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 51/79] USB: serial: option: add Telit FN980 compositions
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (49 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 50/79] USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20 Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 52/79] USB: serial: option: add support for Cinterion CLS8 devices Greg Kroah-Hartman
` (33 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Daniele Palmas, Johan Hovold
From: Daniele Palmas <dnlplm@gmail.com>
commit 5eb3f4b87a0e7e949c976f32f296176a06d1a93b upstream.
This patch adds the following Telit FN980 compositions:
0x1050: tty, adb, rmnet, tty, tty, tty, tty
0x1051: tty, adb, mbim, tty, tty, tty, tty
0x1052: rndis, tty, adb, tty, tty, tty, tty
0x1053: tty, adb, ecm, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1149,6 +1149,14 @@ static const struct usb_device_id option
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
.driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1050, 0xff), /* Telit FN980 (rmnet) */
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1051, 0xff), /* Telit FN980 (MBIM) */
+ .driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1052, 0xff), /* Telit FN980 (RNDIS) */
+ .driver_info = NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1053, 0xff), /* Telit FN980 (ECM) */
+ .driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 52/79] USB: serial: option: add support for Cinterion CLS8 devices
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (50 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 51/79] USB: serial: option: add Telit FN980 compositions Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 53/79] USB: serial: fix runtime PM after driver unbind Greg Kroah-Hartman
` (32 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Reinhard Speyerer, Johan Hovold
From: Reinhard Speyerer <rspmn@arcor.de>
commit dfbac2f4da6a0c4a8f6b4d715a4077a7b8df53ad upstream.
Add support for the serial ports of Cinterion CLS8 devices.
T: Bus=01 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 25 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e2d ProdID=00b0 Rev= 3.18
S: Manufacturer=GEMALTO
S: Product=USB Modem
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -421,6 +421,7 @@ static void option_instat_callback(struc
#define CINTERION_PRODUCT_PH8_AUDIO 0x0083
#define CINTERION_PRODUCT_AHXX_2RMNET 0x0084
#define CINTERION_PRODUCT_AHXX_AUDIO 0x0085
+#define CINTERION_PRODUCT_CLS8 0x00b0
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -1850,6 +1851,8 @@ static const struct usb_device_id option
.driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) },
{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_CLS8, 0xff),
+ .driver_info = RSVD(0) | RSVD(4) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 53/79] USB: serial: fix runtime PM after driver unbind
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (51 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 52/79] USB: serial: option: add support for Cinterion CLS8 devices Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 54/79] USB: usblcd: fix I/O after disconnect Greg Kroah-Hartman
` (31 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit d51bdb93ca7e71d7fb30a572c7b47ed0194bf3fe upstream.
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.
Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.
Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191001084908.2003-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/usb-serial.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -314,10 +314,7 @@ static void serial_cleanup(struct tty_st
serial = port->serial;
owner = serial->type->driver.owner;
- mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
- usb_autopm_put_interface(serial->interface);
- mutex_unlock(&serial->disc_mutex);
+ usb_autopm_put_interface(serial->interface);
usb_serial_put(serial);
module_put(owner);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 54/79] USB: usblcd: fix I/O after disconnect
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (52 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 53/79] USB: serial: fix runtime PM after driver unbind Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 55/79] USB: microtek: fix info-leak at probe Greg Kroah-Hartman
` (30 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit eb7f5a490c5edfe8126f64bc58b9ba2edef0a425 upstream.
Make sure to stop all I/O on disconnect by adding a disconnected flag
which is used to prevent new I/O from being started and by stopping all
ongoing I/O before returning.
This also fixes a potential use-after-free on driver unbind in case the
driver data is freed before the completion handler has run.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org> # 7bbe990c989e
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190926091228.24634-7-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/usblcd.c | 33 +++++++++++++++++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -17,6 +17,7 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/mutex.h>
+#include <linux/rwsem.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
@@ -56,6 +57,8 @@ struct usb_lcd {
using up all RAM */
struct usb_anchor submitted; /* URBs to wait for
before suspend */
+ struct rw_semaphore io_rwsem;
+ unsigned long disconnected:1;
};
#define to_lcd_dev(d) container_of(d, struct usb_lcd, kref)
@@ -141,6 +144,13 @@ static ssize_t lcd_read(struct file *fil
dev = file->private_data;
+ down_read(&dev->io_rwsem);
+
+ if (dev->disconnected) {
+ retval = -ENODEV;
+ goto out_up_io;
+ }
+
/* do a blocking bulk read to get data from the device */
retval = usb_bulk_msg(dev->udev,
usb_rcvbulkpipe(dev->udev,
@@ -157,6 +167,9 @@ static ssize_t lcd_read(struct file *fil
retval = bytes_read;
}
+out_up_io:
+ up_read(&dev->io_rwsem);
+
return retval;
}
@@ -236,11 +249,18 @@ static ssize_t lcd_write(struct file *fi
if (r < 0)
return -EINTR;
+ down_read(&dev->io_rwsem);
+
+ if (dev->disconnected) {
+ retval = -ENODEV;
+ goto err_up_io;
+ }
+
/* create a urb, and a buffer for it, and copy the data to the urb */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
retval = -ENOMEM;
- goto err_no_buf;
+ goto err_up_io;
}
buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL,
@@ -277,6 +297,7 @@ static ssize_t lcd_write(struct file *fi
the USB core will eventually free it entirely */
usb_free_urb(urb);
+ up_read(&dev->io_rwsem);
exit:
return count;
error_unanchor:
@@ -284,7 +305,8 @@ error_unanchor:
error:
usb_free_coherent(dev->udev, count, buf, urb->transfer_dma);
usb_free_urb(urb);
-err_no_buf:
+err_up_io:
+ up_read(&dev->io_rwsem);
up(&dev->limit_sem);
return retval;
}
@@ -327,6 +349,7 @@ static int lcd_probe(struct usb_interfac
}
kref_init(&dev->kref);
sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES);
+ init_rwsem(&dev->io_rwsem);
init_usb_anchor(&dev->submitted);
dev->udev = usb_get_dev(interface_to_usbdev(interface));
@@ -437,6 +460,12 @@ static void lcd_disconnect(struct usb_in
/* give back our minor */
usb_deregister_dev(interface, &lcd_class);
+ down_write(&dev->io_rwsem);
+ dev->disconnected = 1;
+ up_write(&dev->io_rwsem);
+
+ usb_kill_anchored_urbs(&dev->submitted);
+
/* decrement our usage count */
kref_put(&dev->kref, lcd_delete);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 55/79] USB: microtek: fix info-leak at probe
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (53 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 54/79] USB: usblcd: fix I/O after disconnect Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 56/79] USB: dummy-hcd: fix power budget for SuperSpeed mode Greg Kroah-Hartman
` (29 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+5630ca7c3b2be5c9da5e,
Johan Hovold, Oliver Neukum
From: Johan Hovold <johan@kernel.org>
commit 177238c3d47d54b2ed8f0da7a4290db492f4a057 upstream.
Add missing bulk-in endpoint sanity check to prevent uninitialised stack
data from being reported to the system log and used as endpoint
addresses.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+5630ca7c3b2be5c9da5e@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20191003070931.17009-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/image/microtek.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -724,6 +724,10 @@ static int mts_usb_probe(struct usb_inte
}
+ if (ep_in_current != &ep_in_set[2]) {
+ MTS_WARNING("couldn't find two input bulk endpoints. Bailing out.\n");
+ return -ENODEV;
+ }
if ( ep_out == -1 ) {
MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 56/79] USB: dummy-hcd: fix power budget for SuperSpeed mode
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (54 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 55/79] USB: microtek: fix info-leak at probe Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 57/79] usb: renesas_usbhs: gadget: Do not discard queues in usb_ep_set_{halt,wedge}() Greg Kroah-Hartman
` (28 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jacky Cao, Alan Stern
From: Jacky.Cao@sony.com <Jacky.Cao@sony.com>
commit 2636d49b64671d3d90ecc4daf971b58df3956519 upstream.
The power budget for SuperSpeed mode should be 900 mA
according to USB specification, so set the power budget
to 900mA for dummy_start_ss which is only used for
SuperSpeed mode.
If the max power consumption of SuperSpeed device is
larger than 500 mA, insufficient available bus power
error happens in usb_choose_configuration function
when the device connects to dummy hcd.
Signed-off-by: Jacky Cao <Jacky.Cao@sony.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/16EA1F625E922C43B00B9D82250220500871CDE5@APYOKXMS108.ap.sony.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/gadget/udc/dummy_hcd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -50,6 +50,7 @@
#define DRIVER_VERSION "02 May 2005"
#define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */
+#define POWER_BUDGET_3 900 /* in mA */
static const char driver_name[] = "dummy_hcd";
static const char driver_desc[] = "USB Host+Gadget Emulator";
@@ -2435,7 +2436,7 @@ static int dummy_start_ss(struct dummy_h
dum_hcd->rh_state = DUMMY_RH_RUNNING;
dum_hcd->stream_en_ep = 0;
INIT_LIST_HEAD(&dum_hcd->urbp_list);
- dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
+ dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3;
dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
#ifdef CONFIG_USB_OTG
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 57/79] usb: renesas_usbhs: gadget: Do not discard queues in usb_ep_set_{halt,wedge}()
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (55 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 56/79] USB: dummy-hcd: fix power budget for SuperSpeed mode Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 58/79] usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior Greg Kroah-Hartman
` (27 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Yoshihiro Shimoda
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
commit 1aae1394294cb71c6aa0bc904a94a7f2f1e75936 upstream.
The commit 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area")
had added a usbhsg_pipe_disable() calling into
__usbhsg_ep_set_halt_wedge() accidentally. But, this driver should
not call the usbhsg_pipe_disable() because the function discards
all queues. So, this patch removes it.
Fixes: 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area")
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1569924633-322-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/renesas_usbhs/mod_gadget.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -732,8 +732,6 @@ static int __usbhsg_ep_set_halt_wedge(st
struct device *dev = usbhsg_gpriv_to_dev(gpriv);
unsigned long flags;
- usbhsg_pipe_disable(uep);
-
dev_dbg(dev, "set halt %d (pipe %d)\n",
halt, usbhs_pipe_number(pipe));
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 58/79] usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (56 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 57/79] usb: renesas_usbhs: gadget: Do not discard queues in usb_ep_set_{halt,wedge}() Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 59/79] USB: legousbtower: fix slab info leak at probe Greg Kroah-Hartman
` (26 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Yoshihiro Shimoda
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
commit 4d599cd3a097a85a5c68a2c82b9a48cddf9953ec upstream.
According to usb_ep_set_halt()'s description,
__usbhsg_ep_set_halt_wedge() should return -EAGAIN if the IN endpoint
has any queue or data. Otherwise, this driver is possible to cause
just STALL without sending a short packet data on g_mass_storage driver,
and then a few resetting a device happens on a host side during
a usb enumaration.
Fixes: 2f98382dcdfe ("usb: renesas_usbhs: Add Renesas USBHS Gadget")
Cc: <stable@vger.kernel.org> # v3.0+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1569924633-322-3-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/renesas_usbhs/common.h | 1 +
drivers/usb/renesas_usbhs/fifo.c | 2 +-
drivers/usb/renesas_usbhs/fifo.h | 1 +
drivers/usb/renesas_usbhs/mod_gadget.c | 16 +++++++++++++++-
drivers/usb/renesas_usbhs/pipe.c | 15 +++++++++++++++
drivers/usb/renesas_usbhs/pipe.h | 1 +
6 files changed, 34 insertions(+), 2 deletions(-)
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -213,6 +213,7 @@ struct usbhs_priv;
/* DCPCTR */
#define BSTS (1 << 15) /* Buffer Status */
#define SUREQ (1 << 14) /* Sending SETUP Token */
+#define INBUFM (1 << 14) /* (PIPEnCTR) Transfer Buffer Monitor */
#define CSSTS (1 << 12) /* CSSTS Status */
#define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */
#define SQCLR (1 << 8) /* Toggle Bit Clear */
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -98,7 +98,7 @@ static void __usbhsf_pkt_del(struct usbh
list_del_init(&pkt->node);
}
-static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
{
if (list_empty(&pipe->list))
return NULL;
--- a/drivers/usb/renesas_usbhs/fifo.h
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -106,5 +106,6 @@ void usbhs_pkt_push(struct usbhs_pipe *p
void *buf, int len, int zero, int sequence);
struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt);
void usbhs_pkt_start(struct usbhs_pipe *pipe);
+struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe);
#endif /* RENESAS_USB_FIFO_H */
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -731,6 +731,7 @@ static int __usbhsg_ep_set_halt_wedge(st
struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
struct device *dev = usbhsg_gpriv_to_dev(gpriv);
unsigned long flags;
+ int ret = 0;
dev_dbg(dev, "set halt %d (pipe %d)\n",
halt, usbhs_pipe_number(pipe));
@@ -738,6 +739,18 @@ static int __usbhsg_ep_set_halt_wedge(st
/******************** spin lock ********************/
usbhs_lock(priv, flags);
+ /*
+ * According to usb_ep_set_halt()'s description, this function should
+ * return -EAGAIN if the IN endpoint has any queue or data. Note
+ * that the usbhs_pipe_is_dir_in() returns false if the pipe is an
+ * IN endpoint in the gadget mode.
+ */
+ if (!usbhs_pipe_is_dir_in(pipe) && (__usbhsf_pkt_get(pipe) ||
+ usbhs_pipe_contains_transmittable_data(pipe))) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
if (halt)
usbhs_pipe_stall(pipe);
else
@@ -748,10 +761,11 @@ static int __usbhsg_ep_set_halt_wedge(st
else
usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE);
+out:
usbhs_unlock(priv, flags);
/******************** spin unlock ******************/
- return 0;
+ return ret;
}
static int usbhsg_ep_set_halt(struct usb_ep *ep, int value)
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -279,6 +279,21 @@ int usbhs_pipe_is_accessible(struct usbh
return -EBUSY;
}
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe)
+{
+ u16 val;
+
+ /* Do not support for DCP pipe */
+ if (usbhs_pipe_is_dcp(pipe))
+ return false;
+
+ val = usbhsp_pipectrl_get(pipe);
+ if (val & INBUFM)
+ return true;
+
+ return false;
+}
+
/*
* PID ctrl
*/
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -89,6 +89,7 @@ void usbhs_pipe_init(struct usbhs_priv *
int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe);
void usbhs_pipe_clear(struct usbhs_pipe *pipe);
int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
+bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe);
void usbhs_pipe_enable(struct usbhs_pipe *pipe);
void usbhs_pipe_disable(struct usbhs_pipe *pipe);
void usbhs_pipe_stall(struct usbhs_pipe *pipe);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 59/79] USB: legousbtower: fix slab info leak at probe
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (57 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 58/79] usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 60/79] USB: legousbtower: fix deadlock on disconnect Greg Kroah-Hartman
` (25 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 1d427be4a39defadda6dd8f4659bc17f7591740f upstream.
Make sure to check for short transfers when retrieving the version
information at probe to avoid leaking uninitialised slab data when
logging it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190919083039.30898-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/legousbtower.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -923,8 +923,10 @@ static int tower_probe (struct usb_inter
get_version_reply,
sizeof(*get_version_reply),
1000);
- if (result < 0) {
- dev_err(idev, "LEGO USB Tower get version control request failed\n");
+ if (result < sizeof(*get_version_reply)) {
+ if (result >= 0)
+ result = -EIO;
+ dev_err(idev, "get version request failed: %d\n", result);
retval = result;
goto error;
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 60/79] USB: legousbtower: fix deadlock on disconnect
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (58 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 59/79] USB: legousbtower: fix slab info leak at probe Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 61/79] USB: legousbtower: fix potential NULL-deref " Greg Kroah-Hartman
` (24 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+f9549f5ee8a5416f0b95, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 33a7813219f208f4952ece60ee255fd983272dec upstream.
Fix a potential deadlock if disconnect races with open.
Since commit d4ead16f50f9 ("USB: prevent char device open/deregister
race") core holds an rw-semaphore while open is called and when
releasing the minor number during deregistration. This can lead to an
ABBA deadlock if a driver takes a lock in open which it also holds
during deregistration.
This effectively reverts commit 78663ecc344b ("USB: disconnect open race
in legousbtower") which needlessly introduced this issue after a generic
fix for this race had been added to core by commit d4ead16f50f9 ("USB:
prevent char device open/deregister race").
Fixes: 78663ecc344b ("USB: disconnect open race in legousbtower")
Cc: stable <stable@vger.kernel.org> # 2.6.24
Reported-by: syzbot+f9549f5ee8a5416f0b95@syzkaller.appspotmail.com
Tested-by: syzbot+f9549f5ee8a5416f0b95@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190919083039.30898-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/legousbtower.c | 19 ++-----------------
1 file changed, 2 insertions(+), 17 deletions(-)
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -185,7 +185,6 @@ static const struct usb_device_id tower_
};
MODULE_DEVICE_TABLE (usb, tower_table);
-static DEFINE_MUTEX(open_disc_mutex);
#define LEGO_USB_TOWER_MINOR_BASE 160
@@ -338,18 +337,14 @@ static int tower_open (struct inode *ino
goto exit;
}
- mutex_lock(&open_disc_mutex);
dev = usb_get_intfdata(interface);
-
if (!dev) {
- mutex_unlock(&open_disc_mutex);
retval = -ENODEV;
goto exit;
}
/* lock this device */
if (mutex_lock_interruptible(&dev->lock)) {
- mutex_unlock(&open_disc_mutex);
retval = -ERESTARTSYS;
goto exit;
}
@@ -357,12 +352,10 @@ static int tower_open (struct inode *ino
/* allow opening only once */
if (dev->open_count) {
- mutex_unlock(&open_disc_mutex);
retval = -EBUSY;
goto unlock_exit;
}
dev->open_count = 1;
- mutex_unlock(&open_disc_mutex);
/* reset the tower */
result = usb_control_msg (dev->udev,
@@ -429,10 +422,9 @@ static int tower_release (struct inode *
if (dev == NULL) {
retval = -ENODEV;
- goto exit_nolock;
+ goto exit;
}
- mutex_lock(&open_disc_mutex);
if (mutex_lock_interruptible(&dev->lock)) {
retval = -ERESTARTSYS;
goto exit;
@@ -462,10 +454,7 @@ static int tower_release (struct inode *
unlock_exit:
mutex_unlock(&dev->lock);
-
exit:
- mutex_unlock(&open_disc_mutex);
-exit_nolock:
return retval;
}
@@ -944,7 +933,6 @@ static int tower_probe (struct usb_inter
if (retval) {
/* something prevented us from registering this driver */
dev_err(idev, "Not able to get a minor for this device.\n");
- usb_set_intfdata (interface, NULL);
goto error;
}
dev->minor = interface->minor;
@@ -976,16 +964,13 @@ static void tower_disconnect (struct usb
int minor;
dev = usb_get_intfdata (interface);
- mutex_lock(&open_disc_mutex);
- usb_set_intfdata (interface, NULL);
minor = dev->minor;
- /* give back our minor */
+ /* give back our minor and prevent further open() */
usb_deregister_dev (interface, &tower_class);
mutex_lock(&dev->lock);
- mutex_unlock(&open_disc_mutex);
/* if the device is not opened, then we clean up right now */
if (!dev->open_count) {
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 61/79] USB: legousbtower: fix potential NULL-deref on disconnect
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (59 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 60/79] USB: legousbtower: fix deadlock on disconnect Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 62/79] USB: legousbtower: fix open after failed reset request Greg Kroah-Hartman
` (23 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit cd81e6fa8e033e7bcd59415b4a65672b4780030b upstream.
The driver is using its struct usb_device pointer as an inverted
disconnected flag, but was setting it to NULL before making sure all
completion handlers had run. This could lead to a NULL-pointer
dereference in a number of dev_dbg and dev_err statements in the
completion handlers which relies on said pointer.
Fix this by unconditionally stopping all I/O and preventing
resubmissions by poisoning the interrupt URBs at disconnect and using a
dedicated disconnected flag.
This also makes sure that all I/O has completed by the time the
disconnect callback returns.
Fixes: 9d974b2a06e3 ("USB: legousbtower.c: remove err() usage")
Fixes: fef526cae700 ("USB: legousbtower: remove custom debug macro")
Fixes: 4dae99638097 ("USB: legotower: remove custom debug macro and module parameter")
Cc: stable <stable@vger.kernel.org> # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190919083039.30898-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/legousbtower.c | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -196,6 +196,7 @@ struct lego_usb_tower {
unsigned char minor; /* the starting minor number for this device */
int open_count; /* number of times this port has been opened */
+ unsigned long disconnected:1;
char* read_buffer;
size_t read_buffer_length; /* this much came in */
@@ -295,8 +296,6 @@ static inline void lego_usb_tower_debug_
*/
static inline void tower_delete (struct lego_usb_tower *dev)
{
- tower_abort_transfers (dev);
-
/* free data structures */
usb_free_urb(dev->interrupt_in_urb);
usb_free_urb(dev->interrupt_out_urb);
@@ -436,7 +435,8 @@ static int tower_release (struct inode *
retval = -ENODEV;
goto unlock_exit;
}
- if (dev->udev == NULL) {
+
+ if (dev->disconnected) {
/* the device was unplugged before the file was released */
/* unlock here as tower_delete frees dev */
@@ -472,10 +472,9 @@ static void tower_abort_transfers (struc
if (dev->interrupt_in_running) {
dev->interrupt_in_running = 0;
mb();
- if (dev->udev)
- usb_kill_urb (dev->interrupt_in_urb);
+ usb_kill_urb(dev->interrupt_in_urb);
}
- if (dev->interrupt_out_busy && dev->udev)
+ if (dev->interrupt_out_busy)
usb_kill_urb(dev->interrupt_out_urb);
}
@@ -511,7 +510,7 @@ static unsigned int tower_poll (struct f
dev = file->private_data;
- if (!dev->udev)
+ if (dev->disconnected)
return POLLERR | POLLHUP;
poll_wait(file, &dev->read_wait, wait);
@@ -558,7 +557,7 @@ static ssize_t tower_read (struct file *
}
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
pr_err("No device or device unplugged %d\n", retval);
goto unlock_exit;
@@ -644,7 +643,7 @@ static ssize_t tower_write (struct file
}
/* verify that the device wasn't unplugged */
- if (dev->udev == NULL) {
+ if (dev->disconnected) {
retval = -ENODEV;
pr_err("No device or device unplugged %d\n", retval);
goto unlock_exit;
@@ -753,7 +752,7 @@ static void tower_interrupt_in_callback
resubmit:
/* resubmit if we're still running */
- if (dev->interrupt_in_running && dev->udev) {
+ if (dev->interrupt_in_running) {
retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC);
if (retval)
dev_err(&dev->udev->dev,
@@ -823,6 +822,7 @@ static int tower_probe (struct usb_inter
dev->udev = udev;
dev->open_count = 0;
+ dev->disconnected = 0;
dev->read_buffer = NULL;
dev->read_buffer_length = 0;
@@ -970,6 +970,10 @@ static void tower_disconnect (struct usb
/* give back our minor and prevent further open() */
usb_deregister_dev (interface, &tower_class);
+ /* stop I/O */
+ usb_poison_urb(dev->interrupt_in_urb);
+ usb_poison_urb(dev->interrupt_out_urb);
+
mutex_lock(&dev->lock);
/* if the device is not opened, then we clean up right now */
@@ -977,7 +981,7 @@ static void tower_disconnect (struct usb
mutex_unlock(&dev->lock);
tower_delete (dev);
} else {
- dev->udev = NULL;
+ dev->disconnected = 1;
/* wake up pollers */
wake_up_interruptible_all(&dev->read_wait);
wake_up_interruptible_all(&dev->write_wait);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 62/79] USB: legousbtower: fix open after failed reset request
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (60 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 61/79] USB: legousbtower: fix potential NULL-deref " Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 63/79] USB: legousbtower: fix use-after-free on release Greg Kroah-Hartman
` (22 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 0b074f6986751361ff442bc1127c1648567aa8d6 upstream.
The driver would return with a nonzero open count in case the reset
control request failed. This would prevent any further attempts to open
the char dev until the device was disconnected.
Fix this by incrementing the open count only on successful open.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190919083039.30898-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/legousbtower.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -354,7 +354,6 @@ static int tower_open (struct inode *ino
retval = -EBUSY;
goto unlock_exit;
}
- dev->open_count = 1;
/* reset the tower */
result = usb_control_msg (dev->udev,
@@ -394,13 +393,14 @@ static int tower_open (struct inode *ino
dev_err(&dev->udev->dev,
"Couldn't submit interrupt_in_urb %d\n", retval);
dev->interrupt_in_running = 0;
- dev->open_count = 0;
goto unlock_exit;
}
/* save device in the file's private structure */
file->private_data = dev;
+ dev->open_count = 1;
+
unlock_exit:
mutex_unlock(&dev->lock);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 63/79] USB: legousbtower: fix use-after-free on release
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (61 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 62/79] USB: legousbtower: fix open after failed reset request Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 64/79] staging: vt6655: Fix memory leak in vt6655_probe Greg Kroah-Hartman
` (21 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 726b55d0e22ca72c69c947af87785c830289ddbc upstream.
The driver was accessing its struct usb_device in its release()
callback without holding a reference. This would lead to a
use-after-free whenever the device was disconnected while the character
device was still open.
Fixes: fef526cae700 ("USB: legousbtower: remove custom debug macro")
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191009153848.8664-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/legousbtower.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -302,6 +302,7 @@ static inline void tower_delete (struct
kfree (dev->read_buffer);
kfree (dev->interrupt_in_buffer);
kfree (dev->interrupt_out_buffer);
+ usb_put_dev(dev->udev);
kfree (dev);
}
@@ -820,7 +821,7 @@ static int tower_probe (struct usb_inter
mutex_init(&dev->lock);
- dev->udev = udev;
+ dev->udev = usb_get_dev(udev);
dev->open_count = 0;
dev->disconnected = 0;
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 64/79] staging: vt6655: Fix memory leak in vt6655_probe
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (62 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 63/79] USB: legousbtower: fix use-after-free on release Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 65/79] iio: adc: ad799x: fix probe error handling Greg Kroah-Hartman
` (20 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Navid Emamdoost
From: Navid Emamdoost <navid.emamdoost@gmail.com>
commit 80b15db5e1e9c3300de299b2d43d1aafb593e6ac upstream.
In vt6655_probe, if vnt_init() fails the cleanup code needs to be called
like other error handling cases. The call to device_free_info() is
added.
Fixes: 67013f2c0e58 ("staging: vt6655: mac80211 conversion add main mac80211 functions")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191004200319.22394-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/vt6655/device_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -1668,8 +1668,10 @@ vt6655_probe(struct pci_dev *pcid, const
priv->hw->max_signal = 100;
- if (vnt_init(priv))
+ if (vnt_init(priv)) {
+ device_free_info(priv);
return -ENODEV;
+ }
device_print_info(priv);
pci_set_drvdata(pcid, priv);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 65/79] iio: adc: ad799x: fix probe error handling
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (63 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 64/79] staging: vt6655: Fix memory leak in vt6655_probe Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 66/79] iio: light: opt3001: fix mutex unlock race Greg Kroah-Hartman
` (19 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Marco Felsch, Alexandru Ardelean,
Stable, Jonathan Cameron
From: Marco Felsch <m.felsch@pengutronix.de>
commit c62dd44901cfff12acc5792bf3d2dec20bcaf392 upstream.
Since commit 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe
and reset alert status on probe") the error path is wrong since it
leaves the vref regulator on. Fix this by disabling both regulators.
Fixes: 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/ad799x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -822,10 +822,10 @@ static int ad799x_probe(struct i2c_clien
ret = ad799x_write_config(st, st->chip_config->default_config);
if (ret < 0)
- goto error_disable_reg;
+ goto error_disable_vref;
ret = ad799x_read_config(st);
if (ret < 0)
- goto error_disable_reg;
+ goto error_disable_vref;
st->config = ret;
ret = iio_triggered_buffer_setup(indio_dev, NULL,
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 66/79] iio: light: opt3001: fix mutex unlock race
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (64 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 65/79] iio: adc: ad799x: fix probe error handling Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 67/79] perf llvm: Dont access out-of-scope array Greg Kroah-Hartman
` (18 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, David Frey, Andreas Dannenberg,
Stable, Jonathan Cameron
From: David Frey <dpfrey@gmail.com>
commit 82f3015635249a8c8c45bac303fd84905066f04f upstream.
When an end-of-conversion interrupt is received after performing a
single-shot reading of the light sensor, the driver was waking up the
result ready queue before checking opt->ok_to_ignore_lock to determine
if it should unlock the mutex. The problem occurred in the case where
the other thread woke up and changed the value of opt->ok_to_ignore_lock
to false prior to the interrupt thread performing its read of the
variable. In this case, the mutex would be unlocked twice.
Signed-off-by: David Frey <dpfrey@gmail.com>
Reviewed-by: Andreas Dannenberg <dannenberg@ti.com>
Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/light/opt3001.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -646,6 +646,7 @@ static irqreturn_t opt3001_irq(int irq,
struct iio_dev *iio = _iio;
struct opt3001 *opt = iio_priv(iio);
int ret;
+ bool wake_result_ready_queue = false;
if (!opt->ok_to_ignore_lock)
mutex_lock(&opt->lock);
@@ -680,13 +681,16 @@ static irqreturn_t opt3001_irq(int irq,
}
opt->result = ret;
opt->result_ready = true;
- wake_up(&opt->result_ready_queue);
+ wake_result_ready_queue = true;
}
out:
if (!opt->ok_to_ignore_lock)
mutex_unlock(&opt->lock);
+ if (wake_result_ready_queue)
+ wake_up(&opt->result_ready_queue);
+
return IRQ_HANDLED;
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 67/79] perf llvm: Dont access out-of-scope array
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (65 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 66/79] iio: light: opt3001: fix mutex unlock race Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 68/79] CIFS: Gracefully handle QueryInfo errors during open Greg Kroah-Hartman
` (17 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ian Rogers, Alexander Shishkin,
Andi Kleen, Jiri Olsa, Namhyung Kim, Peter Zijlstra,
Stephane Eranian, Wang Nan, Arnaldo Carvalho de Melo
From: Ian Rogers <irogers@google.com>
commit 7d4c85b7035eb2f9ab217ce649dcd1bfaf0cacd3 upstream.
The 'test_dir' variable is assigned to the 'release' array which is
out-of-scope 3 lines later.
Extend the scope of the 'release' array so that an out-of-scope array
isn't accessed.
Bug detected by clang's address sanitizer.
Fixes: 07bc5c699a3d ("perf tools: Make fetch_kernel_version() publicly available")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190926220018.25402-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/perf/util/llvm-utils.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/tools/perf/util/llvm-utils.c
+++ b/tools/perf/util/llvm-utils.c
@@ -214,14 +214,14 @@ static int detect_kbuild_dir(char **kbui
const char *prefix_dir = "";
const char *suffix_dir = "";
+ /* _UTSNAME_LENGTH is 65 */
+ char release[128];
+
char *autoconf_path;
int err;
if (!test_dir) {
- /* _UTSNAME_LENGTH is 65 */
- char release[128];
-
err = fetch_kernel_version(NULL, release,
sizeof(release));
if (err)
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 68/79] CIFS: Gracefully handle QueryInfo errors during open
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (66 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 67/79] perf llvm: Dont access out-of-scope array Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 69/79] CIFS: Force reval dentry if LOOKUP_REVAL flag is set Greg Kroah-Hartman
` (16 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pavel Shilovsky, Steve French
From: Pavel Shilovsky <piastryyy@gmail.com>
commit 30573a82fb179420b8aac30a3a3595aa96a93156 upstream.
Currently if the client identifies problems when processing
metadata returned in CREATE response, the open handle is being
leaked. This causes multiple problems like a file missing a lease
break by that client which causes high latencies to other clients
accessing the file. Another side-effect of this is that the file
can't be deleted.
Fix this by closing the file after the client hits an error after
the file was opened and the open descriptor wasn't returned to
the user space. Also convert -ESTALE to -EOPENSTALE to allow
the VFS to revalidate a dentry and retry the open.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/file.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -252,6 +252,12 @@ cifs_nt_open(char *full_path, struct ino
rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
xid, fid);
+ if (rc) {
+ server->ops->close(xid, tcon, fid);
+ if (rc == -ESTALE)
+ rc = -EOPENSTALE;
+ }
+
out:
kfree(buf);
return rc;
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 69/79] CIFS: Force reval dentry if LOOKUP_REVAL flag is set
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (67 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 68/79] CIFS: Gracefully handle QueryInfo errors during open Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 70/79] kernel/sysctl.c: do not override max_threads provided by userspace Greg Kroah-Hartman
` (15 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pavel Shilovsky, Steve French
From: Pavel Shilovsky <piastryyy@gmail.com>
commit 0b3d0ef9840f7be202393ca9116b857f6f793715 upstream.
Mark inode for force revalidation if LOOKUP_REVAL flag is set.
This tells the client to actually send a QueryInfo request to
the server to obtain the latest metadata in case a directory
or a file were changed remotely. Only do that if the client
doesn't have a lease for the file to avoid unneeded round
trips to the server.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/cifs/dir.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -830,10 +830,16 @@ lookup_out:
static int
cifs_d_revalidate(struct dentry *direntry, unsigned int flags)
{
+ struct inode *inode;
+
if (flags & LOOKUP_RCU)
return -ECHILD;
if (d_really_is_positive(direntry)) {
+ inode = d_inode(direntry);
+ if ((flags & LOOKUP_REVAL) && !CIFS_CACHE_READ(CIFS_I(inode)))
+ CIFS_I(inode)->time = 0; /* force reval */
+
if (cifs_revalidate_dentry(direntry))
return 0;
else {
@@ -844,7 +850,7 @@ cifs_d_revalidate(struct dentry *direntr
* attributes will have been updated by
* cifs_revalidate_dentry().
*/
- if (IS_AUTOMOUNT(d_inode(direntry)) &&
+ if (IS_AUTOMOUNT(inode) &&
!(direntry->d_flags & DCACHE_NEED_AUTOMOUNT)) {
spin_lock(&direntry->d_lock);
direntry->d_flags |= DCACHE_NEED_AUTOMOUNT;
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 70/79] kernel/sysctl.c: do not override max_threads provided by userspace
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (68 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 69/79] CIFS: Force reval dentry if LOOKUP_REVAL flag is set Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 71/79] arm64: capabilities: Handle sign of the feature bit Greg Kroah-Hartman
` (14 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michal Hocko, Eric W. Biederman,
Heinrich Schuchardt, Andrew Morton, Linus Torvalds
From: Michal Hocko <mhocko@suse.com>
commit b0f53dbc4bc4c371f38b14c391095a3bb8a0bb40 upstream.
Partially revert 16db3d3f1170 ("kernel/sysctl.c: threads-max observe
limits") because the patch is causing a regression to any workload which
needs to override the auto-tuning of the limit provided by kernel.
set_max_threads is implementing a boot time guesstimate to provide a
sensible limit of the concurrently running threads so that runaways will
not deplete all the memory. This is a good thing in general but there
are workloads which might need to increase this limit for an application
to run (reportedly WebSpher MQ is affected) and that is simply not
possible after the mentioned change. It is also very dubious to
override an admin decision by an estimation that doesn't have any direct
relation to correctness of the kernel operation.
Fix this by dropping set_max_threads from sysctl_max_threads so any
value is accepted as long as it fits into MAX_THREADS which is important
to check because allowing more threads could break internal robust futex
restriction. While at it, do not use MIN_THREADS as the lower boundary
because it is also only a heuristic for automatic estimation and admin
might have a good reason to stop new threads to be created even when
below this limit.
This became more severe when we switched x86 from 4k to 8k kernel
stacks. Starting since 6538b8ea886e ("x86_64: expand kernel stack to
16K") (3.16) we use THREAD_SIZE_ORDER = 2 and that halved the auto-tuned
value.
In the particular case
3.12
kernel.threads-max = 515561
4.4
kernel.threads-max = 200000
Neither of the two values is really insane on 32GB machine.
I am not sure we want/need to tune the max_thread value further. If
anything the tuning should be removed altogether if proven not useful in
general. But we definitely need a way to override this auto-tuning.
Link: http://lkml.kernel.org/r/20190922065801.GB18814@dhcp22.suse.cz
Fixes: 16db3d3f1170 ("kernel/sysctl.c: threads-max observe limits")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/fork.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2152,7 +2152,7 @@ int sysctl_max_threads(struct ctl_table
struct ctl_table t;
int ret;
int threads = max_threads;
- int min = MIN_THREADS;
+ int min = 1;
int max = MAX_THREADS;
t = *table;
@@ -2164,7 +2164,7 @@ int sysctl_max_threads(struct ctl_table
if (ret || !write)
return ret;
- set_max_threads(threads);
+ max_threads = threads;
return 0;
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 71/79] arm64: capabilities: Handle sign of the feature bit
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (69 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 70/79] kernel/sysctl.c: do not override max_threads provided by userspace Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 72/79] arm64: Rename cpuid_feature field extract routines Greg Kroah-Hartman
` (13 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Suzuki K Poulose, Will Deacon,
Catalin Marinas, Sasha Levin
From: Suzuki K Poulose <suzuki.poulose@arm.com>
commit ff96f7bc7bf6393eef8ff2bde1279715ce13343a usptream
Use the appropriate accessor for the feature bit by keeping
track of the sign of the feature.
This is a pre-requisite for the commit 28c5dcb22f90 upstream,
which fixes the arm64_ftr_value() for signed feature fields.
Cc: stable@vger.kernel.org # v4.4
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/include/asm/cpufeature.h | 7 +++---
arch/arm64/kernel/cpufeature.c | 33 +++++++++++++++++------------
2 files changed, 23 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 0a66f8241f185..690961a749da1 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -88,9 +88,10 @@ struct arm64_cpu_capabilities {
struct { /* Feature register checking */
u32 sys_reg;
- int field_pos;
- int min_field_value;
- int hwcap_type;
+ u8 field_pos;
+ u8 min_field_value;
+ u8 hwcap_type;
+ bool sign;
unsigned long hwcap;
};
};
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 062484d344509..3949991e544bf 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -636,6 +636,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
.matches = has_useable_gicv3_cpuif,
.sys_reg = SYS_ID_AA64PFR0_EL1,
.field_pos = ID_AA64PFR0_GIC_SHIFT,
+ .sign = FTR_UNSIGNED,
.min_field_value = 1,
},
#ifdef CONFIG_ARM64_PAN
@@ -645,6 +646,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
.matches = has_cpuid_feature,
.sys_reg = SYS_ID_AA64MMFR1_EL1,
.field_pos = ID_AA64MMFR1_PAN_SHIFT,
+ .sign = FTR_UNSIGNED,
.min_field_value = 1,
.enable = cpu_enable_pan,
},
@@ -656,6 +658,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
.matches = has_cpuid_feature,
.sys_reg = SYS_ID_AA64ISAR0_EL1,
.field_pos = ID_AA64ISAR0_ATOMICS_SHIFT,
+ .sign = FTR_UNSIGNED,
.min_field_value = 2,
},
#endif /* CONFIG_AS_LSE && CONFIG_ARM64_LSE_ATOMICS */
@@ -665,37 +668,39 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
.matches = has_cpuid_feature,
.sys_reg = SYS_ID_AA64PFR0_EL1,
.field_pos = ID_AA64PFR0_EL0_SHIFT,
+ .sign = FTR_UNSIGNED,
.min_field_value = ID_AA64PFR0_EL0_32BIT_64BIT,
},
{},
};
-#define HWCAP_CAP(reg, field, min_value, type, cap) \
+#define HWCAP_CAP(reg, field, s, min_value, type, cap) \
{ \
.desc = #cap, \
.matches = has_cpuid_feature, \
.sys_reg = reg, \
.field_pos = field, \
+ .sign = s, \
.min_field_value = min_value, \
.hwcap_type = type, \
.hwcap = cap, \
}
static const struct arm64_cpu_capabilities arm64_hwcaps[] = {
- HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, 2, CAP_HWCAP, HWCAP_PMULL),
- HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, 1, CAP_HWCAP, HWCAP_AES),
- HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA1_SHIFT, 1, CAP_HWCAP, HWCAP_SHA1),
- HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA2_SHIFT, 1, CAP_HWCAP, HWCAP_SHA2),
- HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_CRC32_SHIFT, 1, CAP_HWCAP, HWCAP_CRC32),
- HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_ATOMICS_SHIFT, 2, CAP_HWCAP, HWCAP_ATOMICS),
- HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, 0, CAP_HWCAP, HWCAP_FP),
- HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, 0, CAP_HWCAP, HWCAP_ASIMD),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, HWCAP_PMULL),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_AES),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA1_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_SHA1),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA2_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_SHA2),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_CRC32_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_CRC32),
+ HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_ATOMICS_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, HWCAP_ATOMICS),
+ HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, HWCAP_FP),
+ HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, HWCAP_ASIMD),
#ifdef CONFIG_COMPAT
- HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
- HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
- HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
- HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA2_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2),
- HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_CRC32_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32),
+ HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
+ HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
+ HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
+ HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA2_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2),
+ HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_CRC32_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32),
#endif
{},
};
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 72/79] arm64: Rename cpuid_feature field extract routines
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (70 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 71/79] arm64: capabilities: Handle sign of the feature bit Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 73/79] Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc Greg Kroah-Hartman
` (12 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Suzuki K. Poulose, Will Deacon,
Marc Zyngier, Catalin Marinas, Sasha Levin
From: Suzuki K Poulose <suzuki.poulose@arm.com>
commit 28c5dcb22f90113dea101b0421bc6971bccb7a74 upstream
Now that we have a clear understanding of the sign of a feature,
rename the routines to reflect the sign, so that it is not misused.
The cpuid_feature_extract_field() now accepts a 'sign' parameter.
This makes sure that the arm64_ftr_value() extracts the feature
field properly for signed fields.
Cc: stable@vger.kernel.org # v4.4
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/include/asm/cpufeature.h | 22 ++++++++++++++--------
arch/arm64/kernel/cpufeature.c | 2 +-
arch/arm64/kernel/debug-monitors.c | 2 +-
arch/arm64/kvm/sys_regs.c | 2 +-
arch/arm64/mm/context.c | 3 ++-
5 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 690961a749da1..518eaa63e633e 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -121,15 +121,15 @@ static inline void cpus_set_cap(unsigned int num)
}
static inline int __attribute_const__
-cpuid_feature_extract_field_width(u64 features, int field, int width)
+cpuid_feature_extract_signed_field_width(u64 features, int field, int width)
{
return (s64)(features << (64 - width - field)) >> (64 - width);
}
static inline int __attribute_const__
-cpuid_feature_extract_field(u64 features, int field)
+cpuid_feature_extract_signed_field(u64 features, int field)
{
- return cpuid_feature_extract_field_width(features, field, 4);
+ return cpuid_feature_extract_signed_field_width(features, field, 4);
}
static inline unsigned int __attribute_const__
@@ -149,17 +149,23 @@ static inline u64 arm64_ftr_mask(struct arm64_ftr_bits *ftrp)
return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift);
}
+static inline int __attribute_const__
+cpuid_feature_extract_field(u64 features, int field, bool sign)
+{
+ return (sign) ?
+ cpuid_feature_extract_signed_field(features, field) :
+ cpuid_feature_extract_unsigned_field(features, field);
+}
+
static inline s64 arm64_ftr_value(struct arm64_ftr_bits *ftrp, u64 val)
{
- return ftrp->sign ?
- cpuid_feature_extract_field_width(val, ftrp->shift, ftrp->width) :
- cpuid_feature_extract_unsigned_field_width(val, ftrp->shift, ftrp->width);
+ return (s64)cpuid_feature_extract_field(val, ftrp->shift, ftrp->sign);
}
static inline bool id_aa64mmfr0_mixed_endian_el0(u64 mmfr0)
{
- return cpuid_feature_extract_field(mmfr0, ID_AA64MMFR0_BIGENDEL_SHIFT) == 0x1 ||
- cpuid_feature_extract_field(mmfr0, ID_AA64MMFR0_BIGENDEL0_SHIFT) == 0x1;
+ return cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_BIGENDEL_SHIFT) == 0x1 ||
+ cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_BIGENDEL0_SHIFT) == 0x1;
}
void __init setup_cpu_features(void);
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 3949991e544bf..a0118a07a4a5f 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -600,7 +600,7 @@ u64 read_system_reg(u32 id)
static bool
feature_matches(u64 reg, const struct arm64_cpu_capabilities *entry)
{
- int val = cpuid_feature_extract_field(reg, entry->field_pos);
+ int val = cpuid_feature_extract_field(reg, entry->field_pos, entry->sign);
return val >= entry->min_field_value;
}
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index c8875b64be909..8e7675e5ce4a5 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -34,7 +34,7 @@
/* Determine debug architecture. */
u8 debug_monitors_arch(void)
{
- return cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
+ return cpuid_feature_extract_unsigned_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
ID_AA64DFR0_DEBUGVER_SHIFT);
}
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index c2489f62c4fb1..0a587e7b9b6eb 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -687,7 +687,7 @@ static bool trap_dbgidr(struct kvm_vcpu *vcpu,
} else {
u64 dfr = read_system_reg(SYS_ID_AA64DFR0_EL1);
u64 pfr = read_system_reg(SYS_ID_AA64PFR0_EL1);
- u32 el3 = !!cpuid_feature_extract_field(pfr, ID_AA64PFR0_EL3_SHIFT);
+ u32 el3 = !!cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR0_EL3_SHIFT);
p->regval = ((((dfr >> ID_AA64DFR0_WRPS_SHIFT) & 0xf) << 28) |
(((dfr >> ID_AA64DFR0_BRPS_SHIFT) & 0xf) << 24) |
diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c
index e87f53ff5f583..5c8759cd66f15 100644
--- a/arch/arm64/mm/context.c
+++ b/arch/arm64/mm/context.c
@@ -187,7 +187,8 @@ void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
static int asids_init(void)
{
- int fld = cpuid_feature_extract_field(read_cpuid(ID_AA64MMFR0_EL1), 4);
+ int fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64MMFR0_EL1),
+ ID_AA64MMFR0_ASID_SHIFT);
switch (fld) {
default:
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 73/79] Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (71 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 72/79] arm64: Rename cpuid_feature field extract routines Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 74/79] cifs: Check uniqueid for SMB2+ and return -ESTALE if necessary Greg Kroah-Hartman
` (11 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Navid Emamdoost, Dan Carpenter, Sasha Levin
From: Navid Emamdoost <navid.emamdoost@gmail.com>
[ Upstream commit 5bdea6060618cfcf1459dca137e89aee038ac8b9 ]
In fbtft_framebuffer_alloc the error handling path should take care of
releasing frame buffer after it is allocated via framebuffer_alloc, too.
Therefore, in two failure cases the goto destination is changed to
address this issue.
Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190930030949.28615-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/staging/fbtft/fbtft-core.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 18c2b6daf5885..15937e0ef4d96 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -813,7 +813,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
if (par->gamma.curves && gamma) {
if (fbtft_gamma_parse_str(par,
par->gamma.curves, gamma, strlen(gamma)))
- goto alloc_fail;
+ goto release_framebuf;
}
/* Transmit buffer */
@@ -836,7 +836,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
txbuf = devm_kzalloc(par->info->device, txbuflen, GFP_KERNEL);
}
if (!txbuf)
- goto alloc_fail;
+ goto release_framebuf;
par->txbuf.buf = txbuf;
par->txbuf.len = txbuflen;
}
@@ -872,6 +872,9 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
return info;
+release_framebuf:
+ framebuffer_release(info);
+
alloc_fail:
vfree(vmem);
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 74/79] cifs: Check uniqueid for SMB2+ and return -ESTALE if necessary
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (72 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 73/79] Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 75/79] CIFS: Force revalidate inode when dentry is stale Greg Kroah-Hartman
` (10 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ross Lagerwall, Steve French, Sasha Levin
From: Ross Lagerwall <ross.lagerwall@citrix.com>
[ Upstream commit a108471b5730b52017e73b58c9f486319d2ac308 ]
Commit 7196ac113a4f ("Fix to check Unique id and FileType when client
refer file directly.") checks whether the uniqueid of an inode has
changed when getting the inode info, but only when using the UNIX
extensions. Add a similar check for SMB2+, since this can be done
without an extra network roundtrip.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/inode.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 0f210cb5038a4..3d3c66fcb5ee6 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -829,8 +829,21 @@ cifs_get_inode_info(struct inode **inode, const char *full_path,
}
} else
fattr.cf_uniqueid = iunique(sb, ROOT_I);
- } else
- fattr.cf_uniqueid = CIFS_I(*inode)->uniqueid;
+ } else {
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) &&
+ validinum == false && server->ops->get_srv_inum) {
+ /*
+ * Pass a NULL tcon to ensure we don't make a round
+ * trip to the server. This only works for SMB2+.
+ */
+ tmprc = server->ops->get_srv_inum(xid,
+ NULL, cifs_sb, full_path,
+ &fattr.cf_uniqueid, data);
+ if (tmprc)
+ fattr.cf_uniqueid = CIFS_I(*inode)->uniqueid;
+ } else
+ fattr.cf_uniqueid = CIFS_I(*inode)->uniqueid;
+ }
/* query for SFU type info if supported and needed */
if (fattr.cf_cifsattrs & ATTR_SYSTEM &&
@@ -871,6 +884,13 @@ cifs_get_inode_info(struct inode **inode, const char *full_path,
} else {
/* we already have inode, update it */
+ /* if uniqueid is different, return error */
+ if (unlikely(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM &&
+ CIFS_I(*inode)->uniqueid != fattr.cf_uniqueid)) {
+ rc = -ESTALE;
+ goto cgii_exit;
+ }
+
/* if filetype is different, return error */
if (unlikely(((*inode)->i_mode & S_IFMT) !=
(fattr.cf_mode & S_IFMT))) {
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 75/79] CIFS: Force revalidate inode when dentry is stale
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (73 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 74/79] cifs: Check uniqueid for SMB2+ and return -ESTALE if necessary Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 76/79] media: stkwebcam: fix runtime PM after driver unbind Greg Kroah-Hartman
` (9 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Shilovsky, Steve French, Sasha Levin
From: Pavel Shilovsky <piastryyy@gmail.com>
[ Upstream commit c82e5ac7fe3570a269c0929bf7899f62048e7dbc ]
Currently the client indicates that a dentry is stale when inode
numbers or type types between a local inode and a remote file
don't match. If this is the case attributes is not being copied
from remote to local, so, it is already known that the local copy
has stale metadata. That's why the inode needs to be marked for
revalidation in order to tell the VFS to lookup the dentry again
before openning a file. This prevents unexpected stale errors
to be returned to the user space when openning a file.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
fs/cifs/inode.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 3d3c66fcb5ee6..0a219545940d9 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -405,6 +405,7 @@ int cifs_get_inode_info_unix(struct inode **pinode,
/* if uniqueid is different, return error */
if (unlikely(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM &&
CIFS_I(*pinode)->uniqueid != fattr.cf_uniqueid)) {
+ CIFS_I(*pinode)->time = 0; /* force reval */
rc = -ESTALE;
goto cgiiu_exit;
}
@@ -412,6 +413,7 @@ int cifs_get_inode_info_unix(struct inode **pinode,
/* if filetype is different, return error */
if (unlikely(((*pinode)->i_mode & S_IFMT) !=
(fattr.cf_mode & S_IFMT))) {
+ CIFS_I(*pinode)->time = 0; /* force reval */
rc = -ESTALE;
goto cgiiu_exit;
}
@@ -887,6 +889,7 @@ cifs_get_inode_info(struct inode **inode, const char *full_path,
/* if uniqueid is different, return error */
if (unlikely(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM &&
CIFS_I(*inode)->uniqueid != fattr.cf_uniqueid)) {
+ CIFS_I(*inode)->time = 0; /* force reval */
rc = -ESTALE;
goto cgii_exit;
}
@@ -894,6 +897,7 @@ cifs_get_inode_info(struct inode **inode, const char *full_path,
/* if filetype is different, return error */
if (unlikely(((*inode)->i_mode & S_IFMT) !=
(fattr.cf_mode & S_IFMT))) {
+ CIFS_I(*inode)->time = 0; /* force reval */
rc = -ESTALE;
goto cgii_exit;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 86+ messages in thread* [PATCH 4.4 76/79] media: stkwebcam: fix runtime PM after driver unbind
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (74 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 75/79] CIFS: Force revalidate inode when dentry is stale Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 77/79] tracing: Get trace_array reference for available_tracers files Greg Kroah-Hartman
` (8 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mauro Carvalho Chehab, Johan Hovold
From: Johan Hovold <johan@kernel.org>
commit 30045f2174aab7fb4db7a9cf902d0aa6c75856a7 upstream.
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.
Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.
Note that runtime PM has never actually been enabled for this driver
since the support_autosuspend flag in its usb_driver struct is not set.
Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter")
Cc: stable <stable@vger.kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191001084908.2003-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/media/usb/stkwebcam/stk-webcam.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -642,8 +642,7 @@ static int v4l_stk_release(struct file *
dev->owner = NULL;
}
- if (is_present(dev))
- usb_autopm_put_interface(dev->interface);
+ usb_autopm_put_interface(dev->interface);
mutex_unlock(&dev->lock);
return v4l2_fh_release(fp);
}
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 77/79] tracing: Get trace_array reference for available_tracers files
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (75 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 76/79] media: stkwebcam: fix runtime PM after driver unbind Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 78/79] x86/asm: Fix MWAITX C-state hint value Greg Kroah-Hartman
` (7 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Steven Rostedt (VMware)
From: Steven Rostedt (VMware) <rostedt@goodmis.org>
commit 194c2c74f5532e62c218adeb8e2b683119503907 upstream.
As instances may have different tracers available, we need to look at the
trace_array descriptor that shows the list of the available tracers for the
instance. But there's a race between opening the file and an admin
deleting the instance. The trace_array_get() needs to be called before
accessing the trace_array.
Cc: stable@vger.kernel.org
Fixes: 607e2ea167e56 ("tracing: Set up infrastructure to allow tracers for instances")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/trace.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3370,9 +3370,14 @@ static int show_traces_open(struct inode
if (tracing_disabled)
return -ENODEV;
+ if (trace_array_get(tr) < 0)
+ return -ENODEV;
+
ret = seq_open(file, &show_traces_seq_ops);
- if (ret)
+ if (ret) {
+ trace_array_put(tr);
return ret;
+ }
m = file->private_data;
m->private = tr;
@@ -3380,6 +3385,14 @@ static int show_traces_open(struct inode
return 0;
}
+static int show_traces_release(struct inode *inode, struct file *file)
+{
+ struct trace_array *tr = inode->i_private;
+
+ trace_array_put(tr);
+ return seq_release(inode, file);
+}
+
static ssize_t
tracing_write_stub(struct file *filp, const char __user *ubuf,
size_t count, loff_t *ppos)
@@ -3410,8 +3423,8 @@ static const struct file_operations trac
static const struct file_operations show_traces_fops = {
.open = show_traces_open,
.read = seq_read,
- .release = seq_release,
.llseek = seq_lseek,
+ .release = show_traces_release,
};
static ssize_t
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 78/79] x86/asm: Fix MWAITX C-state hint value
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (76 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 77/79] tracing: Get trace_array reference for available_tracers files Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-16 21:50 ` [PATCH 4.4 79/79] xfs: clear sb->s_fs_info on mount failure Greg Kroah-Hartman
` (6 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Janakarajan Natarajan,
Borislav Petkov, Frederic Weisbecker, H. Peter Anvin,
Ingo Molnar, Thomas Gleixner, x86, Zhenzhong Duan, Ingo Molnar
From: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
commit 454de1e7d970d6bc567686052329e4814842867c upstream.
As per "AMD64 Architecture Programmer's Manual Volume 3: General-Purpose
and System Instructions", MWAITX EAX[7:4]+1 specifies the optional hint
of the optimized C-state. For C0 state, EAX[7:4] should be set to 0xf.
Currently, a value of 0xf is set for EAX[3:0] instead of EAX[7:4]. Fix
this by changing MWAITX_DISABLE_CSTATES from 0xf to 0xf0.
This hasn't had any implications so far because setting reserved bits in
EAX is simply ignored by the CPU.
[ bp: Fixup comment in delay_mwaitx() and massage. ]
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20191007190011.4859-1-Janakarajan.Natarajan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/mwait.h | 2 +-
arch/x86/lib/delay.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
--- a/arch/x86/include/asm/mwait.h
+++ b/arch/x86/include/asm/mwait.h
@@ -19,7 +19,7 @@
#define MWAIT_ECX_INTERRUPT_BREAK 0x1
#define MWAITX_ECX_TIMER_ENABLE BIT(1)
#define MWAITX_MAX_LOOPS ((u32)-1)
-#define MWAITX_DISABLE_CSTATES 0xf
+#define MWAITX_DISABLE_CSTATES 0xf0
static inline void __monitor(const void *eax, unsigned long ecx,
unsigned long edx)
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -112,8 +112,8 @@ static void delay_mwaitx(unsigned long _
__monitorx(this_cpu_ptr(&cpu_tss), 0, 0);
/*
- * AMD, like Intel, supports the EAX hint and EAX=0xf
- * means, do not enter any deep C-state and we use it
+ * AMD, like Intel's MWAIT version, supports the EAX hint and
+ * EAX=0xf0 means, do not enter any deep C-state and we use it
* here in delay() to minimize wakeup latency.
*/
__mwaitx(MWAITX_DISABLE_CSTATES, delay, MWAITX_ECX_TIMER_ENABLE);
^ permalink raw reply [flat|nested] 86+ messages in thread* [PATCH 4.4 79/79] xfs: clear sb->s_fs_info on mount failure
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (77 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 78/79] x86/asm: Fix MWAITX C-state hint value Greg Kroah-Hartman
@ 2019-10-16 21:50 ` Greg Kroah-Hartman
2019-10-17 1:42 ` [PATCH 4.4 00/79] 4.4.197-stable review kernelci.org bot
` (5 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-16 21:50 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dave Chinner, Darrick J. Wong, Ajay Kaher
From: Dave Chinner <dchinner@redhat.com>
commit c9fbd7bbc23dbdd73364be4d045e5d3612cf6e82 upstream.
We recently had an oops reported on a 4.14 kernel in
xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage
and so the m_perag_tree lookup walked into lala land.
Essentially, the machine was under memory pressure when the mount
was being run, xfs_fs_fill_super() failed after allocating the
xfs_mount and attaching it to sb->s_fs_info. It then cleaned up and
freed the xfs_mount, but the sb->s_fs_info field still pointed to
the freed memory. Hence when the superblock shrinker then ran
it fell off the bad pointer.
With the superblock shrinker problem fixed at teh VFS level, this
stale s_fs_info pointer is still a problem - we use it
unconditionally in ->put_super when the superblock is being torn
down, and hence we can still trip over it after a ->fill_super
call failure. Hence we need to clear s_fs_info if
xfs-fs_fill_super() fails, and we need to check if it's valid in
the places it can potentially be dereferenced after a ->fill_super
failure.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/xfs/xfs_super.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1572,6 +1572,7 @@ xfs_fs_fill_super(
out_close_devices:
xfs_close_devices(mp);
out_free_fsname:
+ sb->s_fs_info = NULL;
xfs_free_fsname(mp);
kfree(mp);
out:
@@ -1589,6 +1590,10 @@ xfs_fs_put_super(
{
struct xfs_mount *mp = XFS_M(sb);
+ /* if ->fill_super failed, we have no mount to tear down */
+ if (!sb->s_fs_info)
+ return;
+
xfs_notice(mp, "Unmounting Filesystem");
xfs_filestream_unmount(mp);
xfs_unmountfs(mp);
@@ -1598,6 +1603,8 @@ xfs_fs_put_super(
xfs_destroy_percpu_counters(mp);
xfs_destroy_mount_workqueues(mp);
xfs_close_devices(mp);
+
+ sb->s_fs_info = NULL;
xfs_free_fsname(mp);
kfree(mp);
}
@@ -1617,6 +1624,9 @@ xfs_fs_nr_cached_objects(
struct super_block *sb,
struct shrink_control *sc)
{
+ /* Paranoia: catch incorrect calls during mount setup or teardown */
+ if (WARN_ON_ONCE(!sb->s_fs_info))
+ return 0;
return xfs_reclaim_inodes_count(XFS_M(sb));
}
^ permalink raw reply [flat|nested] 86+ messages in thread* Re: [PATCH 4.4 00/79] 4.4.197-stable review
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (78 preceding siblings ...)
2019-10-16 21:50 ` [PATCH 4.4 79/79] xfs: clear sb->s_fs_info on mount failure Greg Kroah-Hartman
@ 2019-10-17 1:42 ` kernelci.org bot
2019-10-17 14:40 ` shuah
` (4 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: kernelci.org bot @ 2019-10-17 1:42 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
ben.hutchings, lkft-triage, stable
stable-rc/linux-4.4.y boot: 80 boots: 2 failed, 72 passed with 6 offline (v4.4.196-80-g645def690295)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.4.y/kernel/v4.4.196-80-g645def690295/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.4.y/kernel/v4.4.196-80-g645def690295/
Tree: stable-rc
Branch: linux-4.4.y
Git Describe: v4.4.196-80-g645def690295
Git Commit: 645def69029558d1f5833e6b95e81180671da907
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 42 unique boards, 17 SoC families, 13 builds out of 190
Boot Failures Detected:
x86_64:
x86_64_defconfig:
gcc-8:
qemu_x86_64: 1 failed lab
i386:
i386_defconfig:
gcc-8:
qemu_i386: 1 failed lab
Offline Platforms:
arm:
sunxi_defconfig:
gcc-8
sun5i-r8-chip: 1 offline lab
multi_v7_defconfig:
gcc-8
qcom-apq8064-cm-qs600: 1 offline lab
sun5i-r8-chip: 1 offline lab
sun7i-a20-bananapi: 1 offline lab
davinci_all_defconfig:
gcc-8
dm365evm,legacy: 1 offline lab
qcom_defconfig:
gcc-8
qcom-apq8064-cm-qs600: 1 offline lab
---
For more info write to <info@kernelci.org>
^ permalink raw reply [flat|nested] 86+ messages in thread* Re: [PATCH 4.4 00/79] 4.4.197-stable review
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (79 preceding siblings ...)
2019-10-17 1:42 ` [PATCH 4.4 00/79] 4.4.197-stable review kernelci.org bot
@ 2019-10-17 14:40 ` shuah
2019-10-17 18:02 ` Guenter Roeck
` (3 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: shuah @ 2019-10-17 14:40 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, patches, ben.hutchings, lkft-triage,
stable, shuah
On 10/16/19 3:49 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.197 release.
> There are 79 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 18 Oct 2019 09:43:41 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.197-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 86+ messages in thread* Re: [PATCH 4.4 00/79] 4.4.197-stable review
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (80 preceding siblings ...)
2019-10-17 14:40 ` shuah
@ 2019-10-17 18:02 ` Guenter Roeck
2019-10-17 18:18 ` Didik Setiawan
` (2 subsequent siblings)
84 siblings, 0 replies; 86+ messages in thread
From: Guenter Roeck @ 2019-10-17 18:02 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, shuah, patches, ben.hutchings,
lkft-triage, stable
On Wed, Oct 16, 2019 at 02:49:35PM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.197 release.
> There are 79 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 18 Oct 2019 09:43:41 PM UTC.
> Anything received after that time might be too late.
>
Build results:
total: 170 pass: 170 fail: 0
Qemu test results:
total: 324 pass: 324 fail: 0
Guenter
^ permalink raw reply [flat|nested] 86+ messages in thread* Re: [PATCH 4.4 00/79] 4.4.197-stable review
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (81 preceding siblings ...)
2019-10-17 18:02 ` Guenter Roeck
@ 2019-10-17 18:18 ` Didik Setiawan
2019-10-17 20:02 ` Naresh Kamboju
2019-10-18 7:55 ` Jon Hunter
84 siblings, 0 replies; 86+ messages in thread
From: Didik Setiawan @ 2019-10-17 18:18 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, torvalds, akpm, linux, shuah, patches,
ben.hutchings, lkft-triage, stable
On Wed, Oct 16, 2019 at 02:49:35PM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.197 release.
> There are 79 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 18 Oct 2019 09:43:41 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.197-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Compiled, booted, and no regressions found on my x86_64 system.
Thanks,
Didik Setiawan
^ permalink raw reply [flat|nested] 86+ messages in thread* Re: [PATCH 4.4 00/79] 4.4.197-stable review
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (82 preceding siblings ...)
2019-10-17 18:18 ` Didik Setiawan
@ 2019-10-17 20:02 ` Naresh Kamboju
2019-10-18 7:55 ` Jon Hunter
84 siblings, 0 replies; 86+ messages in thread
From: Naresh Kamboju @ 2019-10-17 20:02 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
Shuah Khan, patches, Ben Hutchings, lkft-triage, linux- stable
On Thu, 17 Oct 2019 at 03:23, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.4.197 release.
> There are 79 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 18 Oct 2019 09:43:41 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.197-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.4.197-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: cb63cd392f388e3874d4bc23b0090c3e137bf22d
git describe: v4.4.196-80-gcb63cd392f38
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.196-80-gcb63cd392f38
No regressions (compared to build v4.4.196)
No fixes (compared to build v4.4.196)
Ran 12991 total tests in the following environments and test suites.
Environments
--------------
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* kselftest
* kvm-unit-tests
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* libhugetlbfs
* install-android-platform-tools-r2600
Summary
------------------------------------------------------------------------
kernel: 4.4.197-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.197-rc1-hikey-20191016-586
git commit: 8ef378ea28b5d306c5655fc0b219b8dc01fb1b3f
git describe: 4.4.197-rc1-hikey-20191016-586
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.197-rc1-hikey-20191016-586
No regressions (compared to build 4.4.197-rc1-hikey-20191016-585)
No fixes (compared to build 4.4.197-rc1-hikey-20191016-585)
Ran 1523 total tests in the following environments and test suites.
Environments
--------------
- hi6220-hikey - arm64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 86+ messages in thread* Re: [PATCH 4.4 00/79] 4.4.197-stable review
2019-10-16 21:49 [PATCH 4.4 00/79] 4.4.197-stable review Greg Kroah-Hartman
` (83 preceding siblings ...)
2019-10-17 20:02 ` Naresh Kamboju
@ 2019-10-18 7:55 ` Jon Hunter
84 siblings, 0 replies; 86+ messages in thread
From: Jon Hunter @ 2019-10-18 7:55 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: torvalds, akpm, linux, shuah, patches, ben.hutchings,
lkft-triage, stable, linux-tegra
On 16/10/2019 22:49, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.197 release.
> There are 79 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri 18 Oct 2019 09:43:41 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.197-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v4.4:
6 builds: 6 pass, 0 fail
12 boots: 12 pass, 0 fail
19 tests: 19 pass, 0 fail
Linux version: 4.4.197-rc1-gcb63cd392f38
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
^ permalink raw reply [flat|nested] 86+ messages in thread