linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k
@ 2015-09-30 17:30 Rasmus Villemoes
  2015-10-03 17:14 ` Christoph Hellwig
  0 siblings, 1 reply; 15+ messages in thread
From: Rasmus Villemoes @ 2015-09-30 17:30 UTC (permalink / raw)
  To: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley
  Cc: linux-kernel, linux-scsi

struct error_info has 6 bytes of padding on x86_64 (and I assume also
other 64 bit platforms). This currently amounts to about 4k of wasted
space (and presumably a third of that on 32 bit).

We can avoid that by keeping the codes and the strings in separate
arrays. Keeping those in sync should be easy enough if we use the
standard trick of including a table twice.

Patch 2/2 would be something like below; 1/2 is a 1600 line purely
mechanical thing which I won't spam the lists with unless someone else
thinks this is a good idea.

What do you think?

Subject: [PATCH 2/2] scsi: split additional[] array in two

struct error_info has 6 bytes of padding (on 64 bit platforms), which
amounts to over 4K of wasted space in the additional[]
array. Splitting it in two avoids that waste. A BUILD_BUG_ON and the
fact that the two arrays are generated from the same include file
should keep these two arrays in sync.

$ scripts/bloat-o-meter /tmp/vmlinux vmlinux
add/remove: 2/1 grow/shrink: 1/0 up/down: 7073/-11312 (-4239)

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 drivers/scsi/constants.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 14d5069ca3ff..03f28cdcbc31 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -290,19 +290,19 @@ bool scsi_opcode_sa_name(int opcode, int service_action,
 	return true;
 }
 
-struct error_info {
-	unsigned short code12;	/* 0x0302 looks better than 0x03,0x02 */
-	const char * text;
+static unsigned short additional_code12[] = {
+#define SENSE_CODE(c, s) c
+#include "sense_codes.h"
+#undef SENSE_CODE
 };
 
-
-static const struct error_info additional[] =
-{
-#define SENSE_CODE(c, s) {c, s}
+static const char *additional_text[] = {
+#define SENSE_CODE(c, s) s
 #include "sense_codes.h"
 #undef SENSE_CODE
 };
 
+
 struct error_info2 {
 	unsigned char code1, code2_min, code2_max;
 	const char * str;
@@ -364,11 +364,12 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
 {
 	int i;
 	unsigned short code = ((asc << 8) | ascq);
+	BUILD_BUG_ON(ARRAY_SIZE(additional_code12) != ARRAY_SIZE(additional_text));
 
 	*fmt = NULL;
-	for (i = 0; additional[i].text; i++)
-		if (additional[i].code12 == code)
-			return additional[i].text;
+	for (i = 0; additional_text[i]; i++)
+		if (additional_code12[i] == code)
+			return additional_text[i];
 	for (i = 0; additional2[i].fmt; i++) {
 		if (additional2[i].code1 == asc &&
 		    ascq >= additional2[i].code2_min &&

^ permalink raw reply related	[flat|nested] 15+ messages in thread

* Re: RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k
  2015-09-30 17:30 RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k Rasmus Villemoes
@ 2015-10-03 17:14 ` Christoph Hellwig
  2015-10-03 22:09   ` Rasmus Villemoes
  0 siblings, 1 reply; 15+ messages in thread
From: Christoph Hellwig @ 2015-10-03 17:14 UTC (permalink / raw)
  To: Rasmus Villemoes
  Cc: Hannes Reinecke, James E.J. Bottomley, linux-kernel, linux-scsi

Hi Rasmus,

I like this idea.  But maybe it's also time to just move the constants
to a plain text file and auto-generate C headers from them?  That way
the format in which they can be edited is decoupled from the
representation in the kernel image.

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k
  2015-10-03 17:14 ` Christoph Hellwig
@ 2015-10-03 22:09   ` Rasmus Villemoes
  2015-10-04  8:02     ` Christoph Hellwig
  2015-10-06  1:32     ` RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k Julian Calaby
  0 siblings, 2 replies; 15+ messages in thread
From: Rasmus Villemoes @ 2015-10-03 22:09 UTC (permalink / raw)
  To: Christoph Hellwig
  Cc: Hannes Reinecke, James E.J. Bottomley, linux-kernel, linux-scsi

On Sat, Oct 03 2015, Christoph Hellwig <hch@infradead.org> wrote:

> Hi Rasmus,
>
> I like this idea.  But maybe it's also time to just move the constants
> to a plain text file and auto-generate C headers from them?  That way
> the format in which they can be edited is decoupled from the
> representation in the kernel image.

Well, I don't really have an opinion on that part.

In the meantime, I got another idea for doubling the saving to 8k. It
requires a few more code changes and is perhaps also more hacky. 2/2
would be something like below. Please let me know which version you'd
prefer, and I'll send both patches properly.

Thanks,
Rasmus

Subject: [PATCH 2/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k

On 64 bit, struct error_info has 6 bytes of padding, which amounts to
over 4k of wasted space in the additional[] array. We could easily get
rid of that by instead using separate arrays for the codes and the
pointers. However, we can do even better than that and save an
additional 6 bytes per entry: In the table, just store the sizeof()
the corresponding string literal. The cumulative sum of these is then
the appropriate offset into additional_text, which is built from the
concatenation (with '\0's inbetween) of the strings.

$ scripts/bloat-o-meter /tmp/vmlinux vmlinux
add/remove: 0/0 grow/shrink: 1/1 up/down: 24/-8488 (-8464)
function                                     old     new   delta
scsi_extd_sense_format                       136     160     +24
additional                                 11312    2824   -8488

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 drivers/scsi/constants.c   | 25 +++++++++++++++++++++----
 drivers/scsi/sense_codes.h |  2 --
 2 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 47aaccd5e68e..ccd34b0481cd 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -292,17 +292,31 @@ bool scsi_opcode_sa_name(int opcode, int service_action,
 
 struct error_info {
 	unsigned short code12;	/* 0x0302 looks better than 0x03,0x02 */
-	const char * text;
+	unsigned short size;
 };
 
 
+/*
+ * There are 700+ entries in this table. To save space, we don't store
+ * (code, pointer) pairs, which would make sizeof(struct
+ * error_info)==16 on 64 bits. Rather, the second element just stores
+ * the size (including \0) of the corresponding string, and we use the
+ * sum of these to get the appropriate offset into additional_text
+ * defined below. This approach saves 12 bytes per entry.
+ */
 static const struct error_info additional[] =
 {
-#define SENSE_CODE(c, s) {c, s},
+#define SENSE_CODE(c, s) {c, sizeof(s)},
 #include "sense_codes.h"
 #undef SENSE_CODE
 };
 
+static const char *additional_text =
+#define SENSE_CODE(c, s) s "\0"
+#include "sense_codes.h"
+#undef SENSE_CODE
+	;
+
 struct error_info2 {
 	unsigned char code1, code2_min, code2_max;
 	const char * str;
@@ -364,11 +378,14 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
 {
 	int i;
 	unsigned short code = ((asc << 8) | ascq);
+	unsigned offset = 0;
 
 	*fmt = NULL;
-	for (i = 0; additional[i].text; i++)
+	for (i = 0; i < ARRAY_SIZE(additional); i++) {
 		if (additional[i].code12 == code)
-			return additional[i].text;
+			return additional_text + offset;
+		offset += additional[i].size;
+	}
 	for (i = 0; additional2[i].fmt; i++) {
 		if (additional2[i].code1 == asc &&
 		    ascq >= additional2[i].code2_min &&
diff --git a/drivers/scsi/sense_codes.h b/drivers/scsi/sense_codes.h
index 54b3939d6309..da84d53b3379 100644
--- a/drivers/scsi/sense_codes.h
+++ b/drivers/scsi/sense_codes.h
@@ -833,5 +833,3 @@ SENSE_CODE(0x746E, "External data encryption control timeout")
 SENSE_CODE(0x746F, "External data encryption control error")
 SENSE_CODE(0x7471, "Logical unit access not authorized")
 SENSE_CODE(0x7479, "Security conflict in translated device")
-
-SENSE_CODE(0, NULL)
-- 

^ permalink raw reply related	[flat|nested] 15+ messages in thread

* Re: RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k
  2015-10-03 22:09   ` Rasmus Villemoes
@ 2015-10-04  8:02     ` Christoph Hellwig
  2015-10-05  9:26       ` [PATCH 0/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k Rasmus Villemoes
  2015-10-06  1:32     ` RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k Julian Calaby
  1 sibling, 1 reply; 15+ messages in thread
From: Christoph Hellwig @ 2015-10-04  8:02 UTC (permalink / raw)
  To: Rasmus Villemoes
  Cc: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley,
	linux-kernel, linux-scsi

On Sun, Oct 04, 2015 at 12:09:58AM +0200, Rasmus Villemoes wrote:
> On Sat, Oct 03 2015, Christoph Hellwig <hch@infradead.org> wrote:
> 
> > Hi Rasmus,
> >
> > I like this idea.  But maybe it's also time to just move the constants
> > to a plain text file and auto-generate C headers from them?  That way
> > the format in which they can be edited is decoupled from the
> > representation in the kernel image.
> 
> Well, I don't really have an opinion on that part.
> 
> In the meantime, I got another idea for doubling the saving to 8k. It
> requires a few more code changes and is perhaps also more hacky. 2/2
> would be something like below. Please let me know which version you'd
> prefer, and I'll send both patches properly.

I don't think the new version is too bad, and the saving is impressive.
So I'd opt for the new one.

^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH 0/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k
  2015-10-04  8:02     ` Christoph Hellwig
@ 2015-10-05  9:26       ` Rasmus Villemoes
  2015-10-05  9:26         ` [PATCH 1/2] scsi: move Additional Sense Codes to separate file Rasmus Villemoes
  2015-10-05  9:26         ` [PATCH 2/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k Rasmus Villemoes
  0 siblings, 2 replies; 15+ messages in thread
From: Rasmus Villemoes @ 2015-10-05  9:26 UTC (permalink / raw)
  To: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley
  Cc: linux-scsi, linux-kernel, Rasmus Villemoes

This reduces the impact of choosing CONFIG_SCSI_CONSTANTS by about 8KB.

2dd951ecd511 ("scsi: Conditionally compile in constants.c") updated
the Kconfig help text from 12KB to 75KB. The 12K predated git so was
certainly outdated. But I'm not sure where the 75K comes from; using
size(1) on a defconfig (with/without this config option) vmlinux shows
a difference of about 47K, and 39K after these patches are applied. In
any case, I've left the Kconfig text alone, since I'm not sure I'm
counting the same way the 75K was computed (I'm fairly certain of the
8K delta, however).

Tested with a trivial module calling scsi_extd_sense_format with a few
random known codes and comparing the result to the expected value.

Rasmus Villemoes (2):
  scsi: move Additional Sense Codes to separate file
  scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k

 drivers/scsi/constants.c   | 860 ++-------------------------------------------
 drivers/scsi/sense_codes.h | 835 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 857 insertions(+), 838 deletions(-)
 create mode 100644 drivers/scsi/sense_codes.h

-- 
2.1.3


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH 1/2] scsi: move Additional Sense Codes to separate file
  2015-10-05  9:26       ` [PATCH 0/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k Rasmus Villemoes
@ 2015-10-05  9:26         ` Rasmus Villemoes
  2015-10-05 14:05           ` Bart Van Assche
  2015-10-05  9:26         ` [PATCH 2/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k Rasmus Villemoes
  1 sibling, 1 reply; 15+ messages in thread
From: Rasmus Villemoes @ 2015-10-05  9:26 UTC (permalink / raw)
  To: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley
  Cc: linux-scsi, linux-kernel, Rasmus Villemoes

This is a purely mechanical move of the list of additional sense codes
to a separate file, in preparation for reducing the impact of choosing
CONFIG_SCSI_CONSTANTS=y by about 8k..

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 drivers/scsi/constants.c   | 839 +--------------------------------------------
 drivers/scsi/sense_codes.h | 837 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 840 insertions(+), 836 deletions(-)
 create mode 100644 drivers/scsi/sense_codes.h

diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index fa09d4be2b53..47aaccd5e68e 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -295,845 +295,12 @@ struct error_info {
 	const char * text;
 };
 
-/*
- * The canonical list of T10 Additional Sense Codes is available at:
- * http://www.t10.org/lists/asc-num.txt [most recent: 20141221]
- */
 
 static const struct error_info additional[] =
 {
-	{0x0000, "No additional sense information"},
-	{0x0001, "Filemark detected"},
-	{0x0002, "End-of-partition/medium detected"},
-	{0x0003, "Setmark detected"},
-	{0x0004, "Beginning-of-partition/medium detected"},
-	{0x0005, "End-of-data detected"},
-	{0x0006, "I/O process terminated"},
-	{0x0007, "Programmable early warning detected"},
-	{0x0011, "Audio play operation in progress"},
-	{0x0012, "Audio play operation paused"},
-	{0x0013, "Audio play operation successfully completed"},
-	{0x0014, "Audio play operation stopped due to error"},
-	{0x0015, "No current audio status to return"},
-	{0x0016, "Operation in progress"},
-	{0x0017, "Cleaning requested"},
-	{0x0018, "Erase operation in progress"},
-	{0x0019, "Locate operation in progress"},
-	{0x001A, "Rewind operation in progress"},
-	{0x001B, "Set capacity operation in progress"},
-	{0x001C, "Verify operation in progress"},
-	{0x001D, "ATA pass through information available"},
-	{0x001E, "Conflicting SA creation request"},
-	{0x001F, "Logical unit transitioning to another power condition"},
-	{0x0020, "Extended copy information available"},
-	{0x0021, "Atomic command aborted due to ACA"},
-
-	{0x0100, "No index/sector signal"},
-
-	{0x0200, "No seek complete"},
-
-	{0x0300, "Peripheral device write fault"},
-	{0x0301, "No write current"},
-	{0x0302, "Excessive write errors"},
-
-	{0x0400, "Logical unit not ready, cause not reportable"},
-	{0x0401, "Logical unit is in process of becoming ready"},
-	{0x0402, "Logical unit not ready, initializing command required"},
-	{0x0403, "Logical unit not ready, manual intervention required"},
-	{0x0404, "Logical unit not ready, format in progress"},
-	{0x0405, "Logical unit not ready, rebuild in progress"},
-	{0x0406, "Logical unit not ready, recalculation in progress"},
-	{0x0407, "Logical unit not ready, operation in progress"},
-	{0x0408, "Logical unit not ready, long write in progress"},
-	{0x0409, "Logical unit not ready, self-test in progress"},
-	{0x040A, "Logical unit not accessible, asymmetric access state "
-	 "transition"},
-	{0x040B, "Logical unit not accessible, target port in standby state"},
-	{0x040C, "Logical unit not accessible, target port in unavailable "
-	 "state"},
-	{0x040D, "Logical unit not ready, structure check required"},
-	{0x040E, "Logical unit not ready, security session in progress"},
-	{0x0410, "Logical unit not ready, auxiliary memory not accessible"},
-	{0x0411, "Logical unit not ready, notify (enable spinup) required"},
-	{0x0412, "Logical unit not ready, offline"},
-	{0x0413, "Logical unit not ready, SA creation in progress"},
-	{0x0414, "Logical unit not ready, space allocation in progress"},
-	{0x0415, "Logical unit not ready, robotics disabled"},
-	{0x0416, "Logical unit not ready, configuration required"},
-	{0x0417, "Logical unit not ready, calibration required"},
-	{0x0418, "Logical unit not ready, a door is open"},
-	{0x0419, "Logical unit not ready, operating in sequential mode"},
-	{0x041A, "Logical unit not ready, start stop unit command in "
-	 "progress"},
-	{0x041B, "Logical unit not ready, sanitize in progress"},
-	{0x041C, "Logical unit not ready, additional power use not yet "
-	 "granted"},
-	{0x041D, "Logical unit not ready, configuration in progress"},
-	{0x041E, "Logical unit not ready, microcode activation required"},
-	{0x041F, "Logical unit not ready, microcode download required"},
-	{0x0420, "Logical unit not ready, logical unit reset required"},
-	{0x0421, "Logical unit not ready, hard reset required"},
-	{0x0422, "Logical unit not ready, power cycle required"},
-
-	{0x0500, "Logical unit does not respond to selection"},
-
-	{0x0600, "No reference position found"},
-
-	{0x0700, "Multiple peripheral devices selected"},
-
-	{0x0800, "Logical unit communication failure"},
-	{0x0801, "Logical unit communication time-out"},
-	{0x0802, "Logical unit communication parity error"},
-	{0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"},
-	{0x0804, "Unreachable copy target"},
-
-	{0x0900, "Track following error"},
-	{0x0901, "Tracking servo failure"},
-	{0x0902, "Focus servo failure"},
-	{0x0903, "Spindle servo failure"},
-	{0x0904, "Head select fault"},
-	{0x0905, "Vibration induced tracking error"},
-
-	{0x0A00, "Error log overflow"},
-
-	{0x0B00, "Warning"},
-	{0x0B01, "Warning - specified temperature exceeded"},
-	{0x0B02, "Warning - enclosure degraded"},
-	{0x0B03, "Warning - background self-test failed"},
-	{0x0B04, "Warning - background pre-scan detected medium error"},
-	{0x0B05, "Warning - background medium scan detected medium error"},
-	{0x0B06, "Warning - non-volatile cache now volatile"},
-	{0x0B07, "Warning - degraded power to non-volatile cache"},
-	{0x0B08, "Warning - power loss expected"},
-	{0x0B09, "Warning - device statistics notification active"},
-
-	{0x0C00, "Write error"},
-	{0x0C01, "Write error - recovered with auto reallocation"},
-	{0x0C02, "Write error - auto reallocation failed"},
-	{0x0C03, "Write error - recommend reassignment"},
-	{0x0C04, "Compression check miscompare error"},
-	{0x0C05, "Data expansion occurred during compression"},
-	{0x0C06, "Block not compressible"},
-	{0x0C07, "Write error - recovery needed"},
-	{0x0C08, "Write error - recovery failed"},
-	{0x0C09, "Write error - loss of streaming"},
-	{0x0C0A, "Write error - padding blocks added"},
-	{0x0C0B, "Auxiliary memory write error"},
-	{0x0C0C, "Write error - unexpected unsolicited data"},
-	{0x0C0D, "Write error - not enough unsolicited data"},
-	{0x0C0E, "Multiple write errors"},
-	{0x0C0F, "Defects in error window"},
-	{0x0C10, "Incomplete multiple atomic write operations"},
-
-	{0x0D00, "Error detected by third party temporary initiator"},
-	{0x0D01, "Third party device failure"},
-	{0x0D02, "Copy target device not reachable"},
-	{0x0D03, "Incorrect copy target device type"},
-	{0x0D04, "Copy target device data underrun"},
-	{0x0D05, "Copy target device data overrun"},
-
-	{0x0E00, "Invalid information unit"},
-	{0x0E01, "Information unit too short"},
-	{0x0E02, "Information unit too long"},
-	{0x0E03, "Invalid field in command information unit"},
-
-	{0x1000, "Id CRC or ECC error"},
-	{0x1001, "Logical block guard check failed"},
-	{0x1002, "Logical block application tag check failed"},
-	{0x1003, "Logical block reference tag check failed"},
-	{0x1004, "Logical block protection error on recover buffered data"},
-	{0x1005, "Logical block protection method error"},
-
-	{0x1100, "Unrecovered read error"},
-	{0x1101, "Read retries exhausted"},
-	{0x1102, "Error too long to correct"},
-	{0x1103, "Multiple read errors"},
-	{0x1104, "Unrecovered read error - auto reallocate failed"},
-	{0x1105, "L-EC uncorrectable error"},
-	{0x1106, "CIRC unrecovered error"},
-	{0x1107, "Data re-synchronization error"},
-	{0x1108, "Incomplete block read"},
-	{0x1109, "No gap found"},
-	{0x110A, "Miscorrected error"},
-	{0x110B, "Unrecovered read error - recommend reassignment"},
-	{0x110C, "Unrecovered read error - recommend rewrite the data"},
-	{0x110D, "De-compression CRC error"},
-	{0x110E, "Cannot decompress using declared algorithm"},
-	{0x110F, "Error reading UPC/EAN number"},
-	{0x1110, "Error reading ISRC number"},
-	{0x1111, "Read error - loss of streaming"},
-	{0x1112, "Auxiliary memory read error"},
-	{0x1113, "Read error - failed retransmission request"},
-	{0x1114, "Read error - lba marked bad by application client"},
-	{0x1115, "Write after sanitize required"},
-
-	{0x1200, "Address mark not found for id field"},
-
-	{0x1300, "Address mark not found for data field"},
-
-	{0x1400, "Recorded entity not found"},
-	{0x1401, "Record not found"},
-	{0x1402, "Filemark or setmark not found"},
-	{0x1403, "End-of-data not found"},
-	{0x1404, "Block sequence error"},
-	{0x1405, "Record not found - recommend reassignment"},
-	{0x1406, "Record not found - data auto-reallocated"},
-	{0x1407, "Locate operation failure"},
-
-	{0x1500, "Random positioning error"},
-	{0x1501, "Mechanical positioning error"},
-	{0x1502, "Positioning error detected by read of medium"},
-
-	{0x1600, "Data synchronization mark error"},
-	{0x1601, "Data sync error - data rewritten"},
-	{0x1602, "Data sync error - recommend rewrite"},
-	{0x1603, "Data sync error - data auto-reallocated"},
-	{0x1604, "Data sync error - recommend reassignment"},
-
-	{0x1700, "Recovered data with no error correction applied"},
-	{0x1701, "Recovered data with retries"},
-	{0x1702, "Recovered data with positive head offset"},
-	{0x1703, "Recovered data with negative head offset"},
-	{0x1704, "Recovered data with retries and/or circ applied"},
-	{0x1705, "Recovered data using previous sector id"},
-	{0x1706, "Recovered data without ECC - data auto-reallocated"},
-	{0x1707, "Recovered data without ECC - recommend reassignment"},
-	{0x1708, "Recovered data without ECC - recommend rewrite"},
-	{0x1709, "Recovered data without ECC - data rewritten"},
-
-	{0x1800, "Recovered data with error correction applied"},
-	{0x1801, "Recovered data with error corr. & retries applied"},
-	{0x1802, "Recovered data - data auto-reallocated"},
-	{0x1803, "Recovered data with CIRC"},
-	{0x1804, "Recovered data with L-EC"},
-	{0x1805, "Recovered data - recommend reassignment"},
-	{0x1806, "Recovered data - recommend rewrite"},
-	{0x1807, "Recovered data with ECC - data rewritten"},
-	{0x1808, "Recovered data with linking"},
-
-	{0x1900, "Defect list error"},
-	{0x1901, "Defect list not available"},
-	{0x1902, "Defect list error in primary list"},
-	{0x1903, "Defect list error in grown list"},
-
-	{0x1A00, "Parameter list length error"},
-
-	{0x1B00, "Synchronous data transfer error"},
-
-	{0x1C00, "Defect list not found"},
-	{0x1C01, "Primary defect list not found"},
-	{0x1C02, "Grown defect list not found"},
-
-	{0x1D00, "Miscompare during verify operation"},
-	{0x1D01, "Miscompare verify of unmapped LBA"},
-
-	{0x1E00, "Recovered id with ECC correction"},
-
-	{0x1F00, "Partial defect list transfer"},
-
-	{0x2000, "Invalid command operation code"},
-	{0x2001, "Access denied - initiator pending-enrolled"},
-	{0x2002, "Access denied - no access rights"},
-	{0x2003, "Access denied - invalid mgmt id key"},
-	{0x2004, "Illegal command while in write capable state"},
-	{0x2005, "Obsolete"},
-	{0x2006, "Illegal command while in explicit address mode"},
-	{0x2007, "Illegal command while in implicit address mode"},
-	{0x2008, "Access denied - enrollment conflict"},
-	{0x2009, "Access denied - invalid LU identifier"},
-	{0x200A, "Access denied - invalid proxy token"},
-	{0x200B, "Access denied - ACL LUN conflict"},
-	{0x200C, "Illegal command when not in append-only mode"},
-
-	{0x2100, "Logical block address out of range"},
-	{0x2101, "Invalid element address"},
-	{0x2102, "Invalid address for write"},
-	{0x2103, "Invalid write crossing layer jump"},
-	{0x2104, "Unaligned write command"},
-	{0x2105, "Write boundary violation"},
-	{0x2106, "Attempt to read invalid data"},
-	{0x2107, "Read boundary violation"},
-
-	{0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"},
-
-	{0x2300, "Invalid token operation, cause not reportable"},
-	{0x2301, "Invalid token operation, unsupported token type"},
-	{0x2302, "Invalid token operation, remote token usage not supported"},
-	{0x2303, "Invalid token operation, remote rod token creation not "
-	 "supported"},
-	{0x2304, "Invalid token operation, token unknown"},
-	{0x2305, "Invalid token operation, token corrupt"},
-	{0x2306, "Invalid token operation, token revoked"},
-	{0x2307, "Invalid token operation, token expired"},
-	{0x2308, "Invalid token operation, token cancelled"},
-	{0x2309, "Invalid token operation, token deleted"},
-	{0x230A, "Invalid token operation, invalid token length"},
-
-	{0x2400, "Invalid field in cdb"},
-	{0x2401, "CDB decryption error"},
-	{0x2402, "Obsolete"},
-	{0x2403, "Obsolete"},
-	{0x2404, "Security audit value frozen"},
-	{0x2405, "Security working key frozen"},
-	{0x2406, "Nonce not unique"},
-	{0x2407, "Nonce timestamp out of range"},
-	{0x2408, "Invalid XCDB"},
-
-	{0x2500, "Logical unit not supported"},
-
-	{0x2600, "Invalid field in parameter list"},
-	{0x2601, "Parameter not supported"},
-	{0x2602, "Parameter value invalid"},
-	{0x2603, "Threshold parameters not supported"},
-	{0x2604, "Invalid release of persistent reservation"},
-	{0x2605, "Data decryption error"},
-	{0x2606, "Too many target descriptors"},
-	{0x2607, "Unsupported target descriptor type code"},
-	{0x2608, "Too many segment descriptors"},
-	{0x2609, "Unsupported segment descriptor type code"},
-	{0x260A, "Unexpected inexact segment"},
-	{0x260B, "Inline data length exceeded"},
-	{0x260C, "Invalid operation for copy source or destination"},
-	{0x260D, "Copy segment granularity violation"},
-	{0x260E, "Invalid parameter while port is enabled"},
-	{0x260F, "Invalid data-out buffer integrity check value"},
-	{0x2610, "Data decryption key fail limit reached"},
-	{0x2611, "Incomplete key-associated data set"},
-	{0x2612, "Vendor specific key reference not found"},
-
-	{0x2700, "Write protected"},
-	{0x2701, "Hardware write protected"},
-	{0x2702, "Logical unit software write protected"},
-	{0x2703, "Associated write protect"},
-	{0x2704, "Persistent write protect"},
-	{0x2705, "Permanent write protect"},
-	{0x2706, "Conditional write protect"},
-	{0x2707, "Space allocation failed write protect"},
-	{0x2708, "Zone is read only"},
-
-	{0x2800, "Not ready to ready change, medium may have changed"},
-	{0x2801, "Import or export element accessed"},
-	{0x2802, "Format-layer may have changed"},
-	{0x2803, "Import/export element accessed, medium changed"},
-
-	{0x2900, "Power on, reset, or bus device reset occurred"},
-	{0x2901, "Power on occurred"},
-	{0x2902, "Scsi bus reset occurred"},
-	{0x2903, "Bus device reset function occurred"},
-	{0x2904, "Device internal reset"},
-	{0x2905, "Transceiver mode changed to single-ended"},
-	{0x2906, "Transceiver mode changed to lvd"},
-	{0x2907, "I_T nexus loss occurred"},
-
-	{0x2A00, "Parameters changed"},
-	{0x2A01, "Mode parameters changed"},
-	{0x2A02, "Log parameters changed"},
-	{0x2A03, "Reservations preempted"},
-	{0x2A04, "Reservations released"},
-	{0x2A05, "Registrations preempted"},
-	{0x2A06, "Asymmetric access state changed"},
-	{0x2A07, "Implicit asymmetric access state transition failed"},
-	{0x2A08, "Priority changed"},
-	{0x2A09, "Capacity data has changed"},
-	{0x2A0A, "Error history I_T nexus cleared"},
-	{0x2A0B, "Error history snapshot released"},
-	{0x2A0C, "Error recovery attributes have changed"},
-	{0x2A0D, "Data encryption capabilities changed"},
-	{0x2A10, "Timestamp changed"},
-	{0x2A11, "Data encryption parameters changed by another i_t nexus"},
-	{0x2A12, "Data encryption parameters changed by vendor specific "
-		 "event"},
-	{0x2A13, "Data encryption key instance counter has changed"},
-	{0x2A14, "SA creation capabilities data has changed"},
-	{0x2A15, "Medium removal prevention preempted"},
-
-	{0x2B00, "Copy cannot execute since host cannot disconnect"},
-
-	{0x2C00, "Command sequence error"},
-	{0x2C01, "Too many windows specified"},
-	{0x2C02, "Invalid combination of windows specified"},
-	{0x2C03, "Current program area is not empty"},
-	{0x2C04, "Current program area is empty"},
-	{0x2C05, "Illegal power condition request"},
-	{0x2C06, "Persistent prevent conflict"},
-	{0x2C07, "Previous busy status"},
-	{0x2C08, "Previous task set full status"},
-	{0x2C09, "Previous reservation conflict status"},
-	{0x2C0A, "Partition or collection contains user objects"},
-	{0x2C0B, "Not reserved"},
-	{0x2C0C, "Orwrite generation does not match"},
-	{0x2C0D, "Reset write pointer not allowed"},
-	{0x2C0E, "Zone is offline"},
-
-	{0x2D00, "Overwrite error on update in place"},
-
-	{0x2E00, "Insufficient time for operation"},
-	{0x2E01, "Command timeout before processing"},
-	{0x2E02, "Command timeout during processing"},
-	{0x2E03, "Command timeout during processing due to error recovery"},
-
-	{0x2F00, "Commands cleared by another initiator"},
-	{0x2F01, "Commands cleared by power loss notification"},
-	{0x2F02, "Commands cleared by device server"},
-	{0x2F03, "Some commands cleared by queuing layer event"},
-
-	{0x3000, "Incompatible medium installed"},
-	{0x3001, "Cannot read medium - unknown format"},
-	{0x3002, "Cannot read medium - incompatible format"},
-	{0x3003, "Cleaning cartridge installed"},
-	{0x3004, "Cannot write medium - unknown format"},
-	{0x3005, "Cannot write medium - incompatible format"},
-	{0x3006, "Cannot format medium - incompatible medium"},
-	{0x3007, "Cleaning failure"},
-	{0x3008, "Cannot write - application code mismatch"},
-	{0x3009, "Current session not fixated for append"},
-	{0x300A, "Cleaning request rejected"},
-	{0x300C, "WORM medium - overwrite attempted"},
-	{0x300D, "WORM medium - integrity check"},
-	{0x3010, "Medium not formatted"},
-	{0x3011, "Incompatible volume type"},
-	{0x3012, "Incompatible volume qualifier"},
-	{0x3013, "Cleaning volume expired"},
-
-	{0x3100, "Medium format corrupted"},
-	{0x3101, "Format command failed"},
-	{0x3102, "Zoned formatting failed due to spare linking"},
-	{0x3103, "Sanitize command failed"},
-
-	{0x3200, "No defect spare location available"},
-	{0x3201, "Defect list update failure"},
-
-	{0x3300, "Tape length error"},
-
-	{0x3400, "Enclosure failure"},
-
-	{0x3500, "Enclosure services failure"},
-	{0x3501, "Unsupported enclosure function"},
-	{0x3502, "Enclosure services unavailable"},
-	{0x3503, "Enclosure services transfer failure"},
-	{0x3504, "Enclosure services transfer refused"},
-	{0x3505, "Enclosure services checksum error"},
-
-	{0x3600, "Ribbon, ink, or toner failure"},
-
-	{0x3700, "Rounded parameter"},
-
-	{0x3800, "Event status notification"},
-	{0x3802, "Esn - power management class event"},
-	{0x3804, "Esn - media class event"},
-	{0x3806, "Esn - device busy class event"},
-	{0x3807, "Thin Provisioning soft threshold reached"},
-
-	{0x3900, "Saving parameters not supported"},
-
-	{0x3A00, "Medium not present"},
-	{0x3A01, "Medium not present - tray closed"},
-	{0x3A02, "Medium not present - tray open"},
-	{0x3A03, "Medium not present - loadable"},
-	{0x3A04, "Medium not present - medium auxiliary memory accessible"},
-
-	{0x3B00, "Sequential positioning error"},
-	{0x3B01, "Tape position error at beginning-of-medium"},
-	{0x3B02, "Tape position error at end-of-medium"},
-	{0x3B03, "Tape or electronic vertical forms unit not ready"},
-	{0x3B04, "Slew failure"},
-	{0x3B05, "Paper jam"},
-	{0x3B06, "Failed to sense top-of-form"},
-	{0x3B07, "Failed to sense bottom-of-form"},
-	{0x3B08, "Reposition error"},
-	{0x3B09, "Read past end of medium"},
-	{0x3B0A, "Read past beginning of medium"},
-	{0x3B0B, "Position past end of medium"},
-	{0x3B0C, "Position past beginning of medium"},
-	{0x3B0D, "Medium destination element full"},
-	{0x3B0E, "Medium source element empty"},
-	{0x3B0F, "End of medium reached"},
-	{0x3B11, "Medium magazine not accessible"},
-	{0x3B12, "Medium magazine removed"},
-	{0x3B13, "Medium magazine inserted"},
-	{0x3B14, "Medium magazine locked"},
-	{0x3B15, "Medium magazine unlocked"},
-	{0x3B16, "Mechanical positioning or changer error"},
-	{0x3B17, "Read past end of user object"},
-	{0x3B18, "Element disabled"},
-	{0x3B19, "Element enabled"},
-	{0x3B1A, "Data transfer device removed"},
-	{0x3B1B, "Data transfer device inserted"},
-	{0x3B1C, "Too many logical objects on partition to support "
-	 "operation"},
-
-	{0x3D00, "Invalid bits in identify message"},
-
-	{0x3E00, "Logical unit has not self-configured yet"},
-	{0x3E01, "Logical unit failure"},
-	{0x3E02, "Timeout on logical unit"},
-	{0x3E03, "Logical unit failed self-test"},
-	{0x3E04, "Logical unit unable to update self-test log"},
-
-	{0x3F00, "Target operating conditions have changed"},
-	{0x3F01, "Microcode has been changed"},
-	{0x3F02, "Changed operating definition"},
-	{0x3F03, "Inquiry data has changed"},
-	{0x3F04, "Component device attached"},
-	{0x3F05, "Device identifier changed"},
-	{0x3F06, "Redundancy group created or modified"},
-	{0x3F07, "Redundancy group deleted"},
-	{0x3F08, "Spare created or modified"},
-	{0x3F09, "Spare deleted"},
-	{0x3F0A, "Volume set created or modified"},
-	{0x3F0B, "Volume set deleted"},
-	{0x3F0C, "Volume set deassigned"},
-	{0x3F0D, "Volume set reassigned"},
-	{0x3F0E, "Reported luns data has changed"},
-	{0x3F0F, "Echo buffer overwritten"},
-	{0x3F10, "Medium loadable"},
-	{0x3F11, "Medium auxiliary memory accessible"},
-	{0x3F12, "iSCSI IP address added"},
-	{0x3F13, "iSCSI IP address removed"},
-	{0x3F14, "iSCSI IP address changed"},
-	{0x3F15, "Inspect referrals sense descriptors"},
-	{0x3F16, "Microcode has been changed without reset"},
-/*
- *	{0x40NN, "Ram failure"},
- *	{0x40NN, "Diagnostic failure on component nn"},
- *	{0x41NN, "Data path failure"},
- *	{0x42NN, "Power-on or self-test failure"},
- */
-	{0x4300, "Message error"},
-
-	{0x4400, "Internal target failure"},
-	{0x4401, "Persistent reservation information lost"},
-	{0x4471, "ATA device failed set features"},
-
-	{0x4500, "Select or reselect failure"},
-
-	{0x4600, "Unsuccessful soft reset"},
-
-	{0x4700, "Scsi parity error"},
-	{0x4701, "Data phase CRC error detected"},
-	{0x4702, "Scsi parity error detected during st data phase"},
-	{0x4703, "Information unit iuCRC error detected"},
-	{0x4704, "Asynchronous information protection error detected"},
-	{0x4705, "Protocol service CRC error"},
-	{0x4706, "Phy test function in progress"},
-	{0x477f, "Some commands cleared by iSCSI Protocol event"},
-
-	{0x4800, "Initiator detected error message received"},
-
-	{0x4900, "Invalid message error"},
-
-	{0x4A00, "Command phase error"},
-
-	{0x4B00, "Data phase error"},
-	{0x4B01, "Invalid target port transfer tag received"},
-	{0x4B02, "Too much write data"},
-	{0x4B03, "Ack/nak timeout"},
-	{0x4B04, "Nak received"},
-	{0x4B05, "Data offset error"},
-	{0x4B06, "Initiator response timeout"},
-	{0x4B07, "Connection lost"},
-	{0x4B08, "Data-in buffer overflow - data buffer size"},
-	{0x4B09, "Data-in buffer overflow - data buffer descriptor area"},
-	{0x4B0A, "Data-in buffer error"},
-	{0x4B0B, "Data-out buffer overflow - data buffer size"},
-	{0x4B0C, "Data-out buffer overflow - data buffer descriptor area"},
-	{0x4B0D, "Data-out buffer error"},
-	{0x4B0E, "PCIe fabric error"},
-	{0x4B0F, "PCIe completion timeout"},
-	{0x4B10, "PCIe completer abort"},
-	{0x4B11, "PCIe poisoned tlp received"},
-	{0x4B12, "PCIe eCRC check failed"},
-	{0x4B13, "PCIe unsupported request"},
-	{0x4B14, "PCIe acs violation"},
-	{0x4B15, "PCIe tlp prefix blocked"},
-
-	{0x4C00, "Logical unit failed self-configuration"},
-/*
- *	{0x4DNN, "Tagged overlapped commands (nn = queue tag)"},
- */
-	{0x4E00, "Overlapped commands attempted"},
-
-	{0x5000, "Write append error"},
-	{0x5001, "Write append position error"},
-	{0x5002, "Position error related to timing"},
-
-	{0x5100, "Erase failure"},
-	{0x5101, "Erase failure - incomplete erase operation detected"},
-
-	{0x5200, "Cartridge fault"},
-
-	{0x5300, "Media load or eject failed"},
-	{0x5301, "Unload tape failure"},
-	{0x5302, "Medium removal prevented"},
-	{0x5303, "Medium removal prevented by data transfer element"},
-	{0x5304, "Medium thread or unthread failure"},
-	{0x5305, "Volume identifier invalid"},
-	{0x5306, "Volume identifier missing"},
-	{0x5307, "Duplicate volume identifier"},
-	{0x5308, "Element status unknown"},
-	{0x5309, "Data transfer device error - load failed"},
-	{0x530a, "Data transfer device error - unload failed"},
-	{0x530b, "Data transfer device error - unload missing"},
-	{0x530c, "Data transfer device error - eject failed"},
-	{0x530d, "Data transfer device error - library communication failed"},
-
-	{0x5400, "Scsi to host system interface failure"},
-
-	{0x5500, "System resource failure"},
-	{0x5501, "System buffer full"},
-	{0x5502, "Insufficient reservation resources"},
-	{0x5503, "Insufficient resources"},
-	{0x5504, "Insufficient registration resources"},
-	{0x5505, "Insufficient access control resources"},
-	{0x5506, "Auxiliary memory out of space"},
-	{0x5507, "Quota error"},
-	{0x5508, "Maximum number of supplemental decryption keys exceeded"},
-	{0x5509, "Medium auxiliary memory not accessible"},
-	{0x550A, "Data currently unavailable"},
-	{0x550B, "Insufficient power for operation"},
-	{0x550C, "Insufficient resources to create rod"},
-	{0x550D, "Insufficient resources to create rod token"},
-	{0x550E, "Insufficient zone resources"},
-
-	{0x5700, "Unable to recover table-of-contents"},
-
-	{0x5800, "Generation does not exist"},
-
-	{0x5900, "Updated block read"},
-
-	{0x5A00, "Operator request or state change input"},
-	{0x5A01, "Operator medium removal request"},
-	{0x5A02, "Operator selected write protect"},
-	{0x5A03, "Operator selected write permit"},
-
-	{0x5B00, "Log exception"},
-	{0x5B01, "Threshold condition met"},
-	{0x5B02, "Log counter at maximum"},
-	{0x5B03, "Log list codes exhausted"},
-
-	{0x5C00, "Rpl status change"},
-	{0x5C01, "Spindles synchronized"},
-	{0x5C02, "Spindles not synchronized"},
-
-	{0x5D00, "Failure prediction threshold exceeded"},
-	{0x5D01, "Media failure prediction threshold exceeded"},
-	{0x5D02, "Logical unit failure prediction threshold exceeded"},
-	{0x5D03, "Spare area exhaustion prediction threshold exceeded"},
-	{0x5D10, "Hardware impending failure general hard drive failure"},
-	{0x5D11, "Hardware impending failure drive error rate too high"},
-	{0x5D12, "Hardware impending failure data error rate too high"},
-	{0x5D13, "Hardware impending failure seek error rate too high"},
-	{0x5D14, "Hardware impending failure too many block reassigns"},
-	{0x5D15, "Hardware impending failure access times too high"},
-	{0x5D16, "Hardware impending failure start unit times too high"},
-	{0x5D17, "Hardware impending failure channel parametrics"},
-	{0x5D18, "Hardware impending failure controller detected"},
-	{0x5D19, "Hardware impending failure throughput performance"},
-	{0x5D1A, "Hardware impending failure seek time performance"},
-	{0x5D1B, "Hardware impending failure spin-up retry count"},
-	{0x5D1C, "Hardware impending failure drive calibration retry count"},
-	{0x5D20, "Controller impending failure general hard drive failure"},
-	{0x5D21, "Controller impending failure drive error rate too high"},
-	{0x5D22, "Controller impending failure data error rate too high"},
-	{0x5D23, "Controller impending failure seek error rate too high"},
-	{0x5D24, "Controller impending failure too many block reassigns"},
-	{0x5D25, "Controller impending failure access times too high"},
-	{0x5D26, "Controller impending failure start unit times too high"},
-	{0x5D27, "Controller impending failure channel parametrics"},
-	{0x5D28, "Controller impending failure controller detected"},
-	{0x5D29, "Controller impending failure throughput performance"},
-	{0x5D2A, "Controller impending failure seek time performance"},
-	{0x5D2B, "Controller impending failure spin-up retry count"},
-	{0x5D2C, "Controller impending failure drive calibration retry count"},
-	{0x5D30, "Data channel impending failure general hard drive failure"},
-	{0x5D31, "Data channel impending failure drive error rate too high"},
-	{0x5D32, "Data channel impending failure data error rate too high"},
-	{0x5D33, "Data channel impending failure seek error rate too high"},
-	{0x5D34, "Data channel impending failure too many block reassigns"},
-	{0x5D35, "Data channel impending failure access times too high"},
-	{0x5D36, "Data channel impending failure start unit times too high"},
-	{0x5D37, "Data channel impending failure channel parametrics"},
-	{0x5D38, "Data channel impending failure controller detected"},
-	{0x5D39, "Data channel impending failure throughput performance"},
-	{0x5D3A, "Data channel impending failure seek time performance"},
-	{0x5D3B, "Data channel impending failure spin-up retry count"},
-	{0x5D3C, "Data channel impending failure drive calibration retry "
-	 "count"},
-	{0x5D40, "Servo impending failure general hard drive failure"},
-	{0x5D41, "Servo impending failure drive error rate too high"},
-	{0x5D42, "Servo impending failure data error rate too high"},
-	{0x5D43, "Servo impending failure seek error rate too high"},
-	{0x5D44, "Servo impending failure too many block reassigns"},
-	{0x5D45, "Servo impending failure access times too high"},
-	{0x5D46, "Servo impending failure start unit times too high"},
-	{0x5D47, "Servo impending failure channel parametrics"},
-	{0x5D48, "Servo impending failure controller detected"},
-	{0x5D49, "Servo impending failure throughput performance"},
-	{0x5D4A, "Servo impending failure seek time performance"},
-	{0x5D4B, "Servo impending failure spin-up retry count"},
-	{0x5D4C, "Servo impending failure drive calibration retry count"},
-	{0x5D50, "Spindle impending failure general hard drive failure"},
-	{0x5D51, "Spindle impending failure drive error rate too high"},
-	{0x5D52, "Spindle impending failure data error rate too high"},
-	{0x5D53, "Spindle impending failure seek error rate too high"},
-	{0x5D54, "Spindle impending failure too many block reassigns"},
-	{0x5D55, "Spindle impending failure access times too high"},
-	{0x5D56, "Spindle impending failure start unit times too high"},
-	{0x5D57, "Spindle impending failure channel parametrics"},
-	{0x5D58, "Spindle impending failure controller detected"},
-	{0x5D59, "Spindle impending failure throughput performance"},
-	{0x5D5A, "Spindle impending failure seek time performance"},
-	{0x5D5B, "Spindle impending failure spin-up retry count"},
-	{0x5D5C, "Spindle impending failure drive calibration retry count"},
-	{0x5D60, "Firmware impending failure general hard drive failure"},
-	{0x5D61, "Firmware impending failure drive error rate too high"},
-	{0x5D62, "Firmware impending failure data error rate too high"},
-	{0x5D63, "Firmware impending failure seek error rate too high"},
-	{0x5D64, "Firmware impending failure too many block reassigns"},
-	{0x5D65, "Firmware impending failure access times too high"},
-	{0x5D66, "Firmware impending failure start unit times too high"},
-	{0x5D67, "Firmware impending failure channel parametrics"},
-	{0x5D68, "Firmware impending failure controller detected"},
-	{0x5D69, "Firmware impending failure throughput performance"},
-	{0x5D6A, "Firmware impending failure seek time performance"},
-	{0x5D6B, "Firmware impending failure spin-up retry count"},
-	{0x5D6C, "Firmware impending failure drive calibration retry count"},
-	{0x5DFF, "Failure prediction threshold exceeded (false)"},
-
-	{0x5E00, "Low power condition on"},
-	{0x5E01, "Idle condition activated by timer"},
-	{0x5E02, "Standby condition activated by timer"},
-	{0x5E03, "Idle condition activated by command"},
-	{0x5E04, "Standby condition activated by command"},
-	{0x5E05, "Idle_b condition activated by timer"},
-	{0x5E06, "Idle_b condition activated by command"},
-	{0x5E07, "Idle_c condition activated by timer"},
-	{0x5E08, "Idle_c condition activated by command"},
-	{0x5E09, "Standby_y condition activated by timer"},
-	{0x5E0A, "Standby_y condition activated by command"},
-	{0x5E41, "Power state change to active"},
-	{0x5E42, "Power state change to idle"},
-	{0x5E43, "Power state change to standby"},
-	{0x5E45, "Power state change to sleep"},
-	{0x5E47, "Power state change to device control"},
-
-	{0x6000, "Lamp failure"},
-
-	{0x6100, "Video acquisition error"},
-	{0x6101, "Unable to acquire video"},
-	{0x6102, "Out of focus"},
-
-	{0x6200, "Scan head positioning error"},
-
-	{0x6300, "End of user area encountered on this track"},
-	{0x6301, "Packet does not fit in available space"},
-
-	{0x6400, "Illegal mode for this track"},
-	{0x6401, "Invalid packet size"},
-
-	{0x6500, "Voltage fault"},
-
-	{0x6600, "Automatic document feeder cover up"},
-	{0x6601, "Automatic document feeder lift up"},
-	{0x6602, "Document jam in automatic document feeder"},
-	{0x6603, "Document miss feed automatic in document feeder"},
-
-	{0x6700, "Configuration failure"},
-	{0x6701, "Configuration of incapable logical units failed"},
-	{0x6702, "Add logical unit failed"},
-	{0x6703, "Modification of logical unit failed"},
-	{0x6704, "Exchange of logical unit failed"},
-	{0x6705, "Remove of logical unit failed"},
-	{0x6706, "Attachment of logical unit failed"},
-	{0x6707, "Creation of logical unit failed"},
-	{0x6708, "Assign failure occurred"},
-	{0x6709, "Multiply assigned logical unit"},
-	{0x670A, "Set target port groups command failed"},
-	{0x670B, "ATA device feature not enabled"},
-
-	{0x6800, "Logical unit not configured"},
-	{0x6801, "Subsidiary logical unit not configured"},
-
-	{0x6900, "Data loss on logical unit"},
-	{0x6901, "Multiple logical unit failures"},
-	{0x6902, "Parity/data mismatch"},
-
-	{0x6A00, "Informational, refer to log"},
-
-	{0x6B00, "State change has occurred"},
-	{0x6B01, "Redundancy level got better"},
-	{0x6B02, "Redundancy level got worse"},
-
-	{0x6C00, "Rebuild failure occurred"},
-
-	{0x6D00, "Recalculate failure occurred"},
-
-	{0x6E00, "Command to logical unit failed"},
-
-	{0x6F00, "Copy protection key exchange failure - authentication "
-	 "failure"},
-	{0x6F01, "Copy protection key exchange failure - key not present"},
-	{0x6F02, "Copy protection key exchange failure - key not established"},
-	{0x6F03, "Read of scrambled sector without authentication"},
-	{0x6F04, "Media region code is mismatched to logical unit region"},
-	{0x6F05, "Drive region must be permanent/region reset count error"},
-	{0x6F06, "Insufficient block count for binding nonce recording"},
-	{0x6F07, "Conflict in binding nonce recording"},
-/*
- *	{0x70NN, "Decompression exception short algorithm id of nn"},
- */
-	{0x7100, "Decompression exception long algorithm id"},
-
-	{0x7200, "Session fixation error"},
-	{0x7201, "Session fixation error writing lead-in"},
-	{0x7202, "Session fixation error writing lead-out"},
-	{0x7203, "Session fixation error - incomplete track in session"},
-	{0x7204, "Empty or partially written reserved track"},
-	{0x7205, "No more track reservations allowed"},
-	{0x7206, "RMZ extension is not allowed"},
-	{0x7207, "No more test zone extensions are allowed"},
-
-	{0x7300, "Cd control error"},
-	{0x7301, "Power calibration area almost full"},
-	{0x7302, "Power calibration area is full"},
-	{0x7303, "Power calibration area error"},
-	{0x7304, "Program memory area update failure"},
-	{0x7305, "Program memory area is full"},
-	{0x7306, "RMA/PMA is almost full"},
-	{0x7310, "Current power calibration area almost full"},
-	{0x7311, "Current power calibration area is full"},
-	{0x7317, "RDZ is full"},
-
-	{0x7400, "Security error"},
-	{0x7401, "Unable to decrypt data"},
-	{0x7402, "Unencrypted data encountered while decrypting"},
-	{0x7403, "Incorrect data encryption key"},
-	{0x7404, "Cryptographic integrity validation failed"},
-	{0x7405, "Error decrypting data"},
-	{0x7406, "Unknown signature verification key"},
-	{0x7407, "Encryption parameters not useable"},
-	{0x7408, "Digital signature validation failure"},
-	{0x7409, "Encryption mode mismatch on read"},
-	{0x740A, "Encrypted block not raw read enabled"},
-	{0x740B, "Incorrect Encryption parameters"},
-	{0x740C, "Unable to decrypt parameter list"},
-	{0x740D, "Encryption algorithm disabled"},
-	{0x7410, "SA creation parameter value invalid"},
-	{0x7411, "SA creation parameter value rejected"},
-	{0x7412, "Invalid SA usage"},
-	{0x7421, "Data Encryption configuration prevented"},
-	{0x7430, "SA creation parameter not supported"},
-	{0x7440, "Authentication failed"},
-	{0x7461, "External data encryption key manager access error"},
-	{0x7462, "External data encryption key manager error"},
-	{0x7463, "External data encryption key not found"},
-	{0x7464, "External data encryption request not authorized"},
-	{0x746E, "External data encryption control timeout"},
-	{0x746F, "External data encryption control error"},
-	{0x7471, "Logical unit access not authorized"},
-	{0x7479, "Security conflict in translated device"},
-
-	{0, NULL}
+#define SENSE_CODE(c, s) {c, s},
+#include "sense_codes.h"
+#undef SENSE_CODE
 };
 
 struct error_info2 {
diff --git a/drivers/scsi/sense_codes.h b/drivers/scsi/sense_codes.h
new file mode 100644
index 000000000000..54b3939d6309
--- /dev/null
+++ b/drivers/scsi/sense_codes.h
@@ -0,0 +1,837 @@
+/*
+ * The canonical list of T10 Additional Sense Codes is available at:
+ * http://www.t10.org/lists/asc-num.txt [most recent: 20141221]
+ */
+
+SENSE_CODE(0x0000, "No additional sense information")
+SENSE_CODE(0x0001, "Filemark detected")
+SENSE_CODE(0x0002, "End-of-partition/medium detected")
+SENSE_CODE(0x0003, "Setmark detected")
+SENSE_CODE(0x0004, "Beginning-of-partition/medium detected")
+SENSE_CODE(0x0005, "End-of-data detected")
+SENSE_CODE(0x0006, "I/O process terminated")
+SENSE_CODE(0x0007, "Programmable early warning detected")
+SENSE_CODE(0x0011, "Audio play operation in progress")
+SENSE_CODE(0x0012, "Audio play operation paused")
+SENSE_CODE(0x0013, "Audio play operation successfully completed")
+SENSE_CODE(0x0014, "Audio play operation stopped due to error")
+SENSE_CODE(0x0015, "No current audio status to return")
+SENSE_CODE(0x0016, "Operation in progress")
+SENSE_CODE(0x0017, "Cleaning requested")
+SENSE_CODE(0x0018, "Erase operation in progress")
+SENSE_CODE(0x0019, "Locate operation in progress")
+SENSE_CODE(0x001A, "Rewind operation in progress")
+SENSE_CODE(0x001B, "Set capacity operation in progress")
+SENSE_CODE(0x001C, "Verify operation in progress")
+SENSE_CODE(0x001D, "ATA pass through information available")
+SENSE_CODE(0x001E, "Conflicting SA creation request")
+SENSE_CODE(0x001F, "Logical unit transitioning to another power condition")
+SENSE_CODE(0x0020, "Extended copy information available")
+SENSE_CODE(0x0021, "Atomic command aborted due to ACA")
+
+SENSE_CODE(0x0100, "No index/sector signal")
+
+SENSE_CODE(0x0200, "No seek complete")
+
+SENSE_CODE(0x0300, "Peripheral device write fault")
+SENSE_CODE(0x0301, "No write current")
+SENSE_CODE(0x0302, "Excessive write errors")
+
+SENSE_CODE(0x0400, "Logical unit not ready, cause not reportable")
+SENSE_CODE(0x0401, "Logical unit is in process of becoming ready")
+SENSE_CODE(0x0402, "Logical unit not ready, initializing command required")
+SENSE_CODE(0x0403, "Logical unit not ready, manual intervention required")
+SENSE_CODE(0x0404, "Logical unit not ready, format in progress")
+SENSE_CODE(0x0405, "Logical unit not ready, rebuild in progress")
+SENSE_CODE(0x0406, "Logical unit not ready, recalculation in progress")
+SENSE_CODE(0x0407, "Logical unit not ready, operation in progress")
+SENSE_CODE(0x0408, "Logical unit not ready, long write in progress")
+SENSE_CODE(0x0409, "Logical unit not ready, self-test in progress")
+SENSE_CODE(0x040A, "Logical unit not accessible, asymmetric access state "
+ "transition")
+SENSE_CODE(0x040B, "Logical unit not accessible, target port in standby state")
+SENSE_CODE(0x040C, "Logical unit not accessible, target port in unavailable "
+ "state")
+SENSE_CODE(0x040D, "Logical unit not ready, structure check required")
+SENSE_CODE(0x040E, "Logical unit not ready, security session in progress")
+SENSE_CODE(0x0410, "Logical unit not ready, auxiliary memory not accessible")
+SENSE_CODE(0x0411, "Logical unit not ready, notify (enable spinup) required")
+SENSE_CODE(0x0412, "Logical unit not ready, offline")
+SENSE_CODE(0x0413, "Logical unit not ready, SA creation in progress")
+SENSE_CODE(0x0414, "Logical unit not ready, space allocation in progress")
+SENSE_CODE(0x0415, "Logical unit not ready, robotics disabled")
+SENSE_CODE(0x0416, "Logical unit not ready, configuration required")
+SENSE_CODE(0x0417, "Logical unit not ready, calibration required")
+SENSE_CODE(0x0418, "Logical unit not ready, a door is open")
+SENSE_CODE(0x0419, "Logical unit not ready, operating in sequential mode")
+SENSE_CODE(0x041A, "Logical unit not ready, start stop unit command in "
+ "progress")
+SENSE_CODE(0x041B, "Logical unit not ready, sanitize in progress")
+SENSE_CODE(0x041C, "Logical unit not ready, additional power use not yet "
+ "granted")
+SENSE_CODE(0x041D, "Logical unit not ready, configuration in progress")
+SENSE_CODE(0x041E, "Logical unit not ready, microcode activation required")
+SENSE_CODE(0x041F, "Logical unit not ready, microcode download required")
+SENSE_CODE(0x0420, "Logical unit not ready, logical unit reset required")
+SENSE_CODE(0x0421, "Logical unit not ready, hard reset required")
+SENSE_CODE(0x0422, "Logical unit not ready, power cycle required")
+
+SENSE_CODE(0x0500, "Logical unit does not respond to selection")
+
+SENSE_CODE(0x0600, "No reference position found")
+
+SENSE_CODE(0x0700, "Multiple peripheral devices selected")
+
+SENSE_CODE(0x0800, "Logical unit communication failure")
+SENSE_CODE(0x0801, "Logical unit communication time-out")
+SENSE_CODE(0x0802, "Logical unit communication parity error")
+SENSE_CODE(0x0803, "Logical unit communication CRC error (Ultra-DMA/32)")
+SENSE_CODE(0x0804, "Unreachable copy target")
+
+SENSE_CODE(0x0900, "Track following error")
+SENSE_CODE(0x0901, "Tracking servo failure")
+SENSE_CODE(0x0902, "Focus servo failure")
+SENSE_CODE(0x0903, "Spindle servo failure")
+SENSE_CODE(0x0904, "Head select fault")
+SENSE_CODE(0x0905, "Vibration induced tracking error")
+
+SENSE_CODE(0x0A00, "Error log overflow")
+
+SENSE_CODE(0x0B00, "Warning")
+SENSE_CODE(0x0B01, "Warning - specified temperature exceeded")
+SENSE_CODE(0x0B02, "Warning - enclosure degraded")
+SENSE_CODE(0x0B03, "Warning - background self-test failed")
+SENSE_CODE(0x0B04, "Warning - background pre-scan detected medium error")
+SENSE_CODE(0x0B05, "Warning - background medium scan detected medium error")
+SENSE_CODE(0x0B06, "Warning - non-volatile cache now volatile")
+SENSE_CODE(0x0B07, "Warning - degraded power to non-volatile cache")
+SENSE_CODE(0x0B08, "Warning - power loss expected")
+SENSE_CODE(0x0B09, "Warning - device statistics notification active")
+
+SENSE_CODE(0x0C00, "Write error")
+SENSE_CODE(0x0C01, "Write error - recovered with auto reallocation")
+SENSE_CODE(0x0C02, "Write error - auto reallocation failed")
+SENSE_CODE(0x0C03, "Write error - recommend reassignment")
+SENSE_CODE(0x0C04, "Compression check miscompare error")
+SENSE_CODE(0x0C05, "Data expansion occurred during compression")
+SENSE_CODE(0x0C06, "Block not compressible")
+SENSE_CODE(0x0C07, "Write error - recovery needed")
+SENSE_CODE(0x0C08, "Write error - recovery failed")
+SENSE_CODE(0x0C09, "Write error - loss of streaming")
+SENSE_CODE(0x0C0A, "Write error - padding blocks added")
+SENSE_CODE(0x0C0B, "Auxiliary memory write error")
+SENSE_CODE(0x0C0C, "Write error - unexpected unsolicited data")
+SENSE_CODE(0x0C0D, "Write error - not enough unsolicited data")
+SENSE_CODE(0x0C0E, "Multiple write errors")
+SENSE_CODE(0x0C0F, "Defects in error window")
+SENSE_CODE(0x0C10, "Incomplete multiple atomic write operations")
+
+SENSE_CODE(0x0D00, "Error detected by third party temporary initiator")
+SENSE_CODE(0x0D01, "Third party device failure")
+SENSE_CODE(0x0D02, "Copy target device not reachable")
+SENSE_CODE(0x0D03, "Incorrect copy target device type")
+SENSE_CODE(0x0D04, "Copy target device data underrun")
+SENSE_CODE(0x0D05, "Copy target device data overrun")
+
+SENSE_CODE(0x0E00, "Invalid information unit")
+SENSE_CODE(0x0E01, "Information unit too short")
+SENSE_CODE(0x0E02, "Information unit too long")
+SENSE_CODE(0x0E03, "Invalid field in command information unit")
+
+SENSE_CODE(0x1000, "Id CRC or ECC error")
+SENSE_CODE(0x1001, "Logical block guard check failed")
+SENSE_CODE(0x1002, "Logical block application tag check failed")
+SENSE_CODE(0x1003, "Logical block reference tag check failed")
+SENSE_CODE(0x1004, "Logical block protection error on recover buffered data")
+SENSE_CODE(0x1005, "Logical block protection method error")
+
+SENSE_CODE(0x1100, "Unrecovered read error")
+SENSE_CODE(0x1101, "Read retries exhausted")
+SENSE_CODE(0x1102, "Error too long to correct")
+SENSE_CODE(0x1103, "Multiple read errors")
+SENSE_CODE(0x1104, "Unrecovered read error - auto reallocate failed")
+SENSE_CODE(0x1105, "L-EC uncorrectable error")
+SENSE_CODE(0x1106, "CIRC unrecovered error")
+SENSE_CODE(0x1107, "Data re-synchronization error")
+SENSE_CODE(0x1108, "Incomplete block read")
+SENSE_CODE(0x1109, "No gap found")
+SENSE_CODE(0x110A, "Miscorrected error")
+SENSE_CODE(0x110B, "Unrecovered read error - recommend reassignment")
+SENSE_CODE(0x110C, "Unrecovered read error - recommend rewrite the data")
+SENSE_CODE(0x110D, "De-compression CRC error")
+SENSE_CODE(0x110E, "Cannot decompress using declared algorithm")
+SENSE_CODE(0x110F, "Error reading UPC/EAN number")
+SENSE_CODE(0x1110, "Error reading ISRC number")
+SENSE_CODE(0x1111, "Read error - loss of streaming")
+SENSE_CODE(0x1112, "Auxiliary memory read error")
+SENSE_CODE(0x1113, "Read error - failed retransmission request")
+SENSE_CODE(0x1114, "Read error - lba marked bad by application client")
+SENSE_CODE(0x1115, "Write after sanitize required")
+
+SENSE_CODE(0x1200, "Address mark not found for id field")
+
+SENSE_CODE(0x1300, "Address mark not found for data field")
+
+SENSE_CODE(0x1400, "Recorded entity not found")
+SENSE_CODE(0x1401, "Record not found")
+SENSE_CODE(0x1402, "Filemark or setmark not found")
+SENSE_CODE(0x1403, "End-of-data not found")
+SENSE_CODE(0x1404, "Block sequence error")
+SENSE_CODE(0x1405, "Record not found - recommend reassignment")
+SENSE_CODE(0x1406, "Record not found - data auto-reallocated")
+SENSE_CODE(0x1407, "Locate operation failure")
+
+SENSE_CODE(0x1500, "Random positioning error")
+SENSE_CODE(0x1501, "Mechanical positioning error")
+SENSE_CODE(0x1502, "Positioning error detected by read of medium")
+
+SENSE_CODE(0x1600, "Data synchronization mark error")
+SENSE_CODE(0x1601, "Data sync error - data rewritten")
+SENSE_CODE(0x1602, "Data sync error - recommend rewrite")
+SENSE_CODE(0x1603, "Data sync error - data auto-reallocated")
+SENSE_CODE(0x1604, "Data sync error - recommend reassignment")
+
+SENSE_CODE(0x1700, "Recovered data with no error correction applied")
+SENSE_CODE(0x1701, "Recovered data with retries")
+SENSE_CODE(0x1702, "Recovered data with positive head offset")
+SENSE_CODE(0x1703, "Recovered data with negative head offset")
+SENSE_CODE(0x1704, "Recovered data with retries and/or circ applied")
+SENSE_CODE(0x1705, "Recovered data using previous sector id")
+SENSE_CODE(0x1706, "Recovered data without ECC - data auto-reallocated")
+SENSE_CODE(0x1707, "Recovered data without ECC - recommend reassignment")
+SENSE_CODE(0x1708, "Recovered data without ECC - recommend rewrite")
+SENSE_CODE(0x1709, "Recovered data without ECC - data rewritten")
+
+SENSE_CODE(0x1800, "Recovered data with error correction applied")
+SENSE_CODE(0x1801, "Recovered data with error corr. & retries applied")
+SENSE_CODE(0x1802, "Recovered data - data auto-reallocated")
+SENSE_CODE(0x1803, "Recovered data with CIRC")
+SENSE_CODE(0x1804, "Recovered data with L-EC")
+SENSE_CODE(0x1805, "Recovered data - recommend reassignment")
+SENSE_CODE(0x1806, "Recovered data - recommend rewrite")
+SENSE_CODE(0x1807, "Recovered data with ECC - data rewritten")
+SENSE_CODE(0x1808, "Recovered data with linking")
+
+SENSE_CODE(0x1900, "Defect list error")
+SENSE_CODE(0x1901, "Defect list not available")
+SENSE_CODE(0x1902, "Defect list error in primary list")
+SENSE_CODE(0x1903, "Defect list error in grown list")
+
+SENSE_CODE(0x1A00, "Parameter list length error")
+
+SENSE_CODE(0x1B00, "Synchronous data transfer error")
+
+SENSE_CODE(0x1C00, "Defect list not found")
+SENSE_CODE(0x1C01, "Primary defect list not found")
+SENSE_CODE(0x1C02, "Grown defect list not found")
+
+SENSE_CODE(0x1D00, "Miscompare during verify operation")
+SENSE_CODE(0x1D01, "Miscompare verify of unmapped LBA")
+
+SENSE_CODE(0x1E00, "Recovered id with ECC correction")
+
+SENSE_CODE(0x1F00, "Partial defect list transfer")
+
+SENSE_CODE(0x2000, "Invalid command operation code")
+SENSE_CODE(0x2001, "Access denied - initiator pending-enrolled")
+SENSE_CODE(0x2002, "Access denied - no access rights")
+SENSE_CODE(0x2003, "Access denied - invalid mgmt id key")
+SENSE_CODE(0x2004, "Illegal command while in write capable state")
+SENSE_CODE(0x2005, "Obsolete")
+SENSE_CODE(0x2006, "Illegal command while in explicit address mode")
+SENSE_CODE(0x2007, "Illegal command while in implicit address mode")
+SENSE_CODE(0x2008, "Access denied - enrollment conflict")
+SENSE_CODE(0x2009, "Access denied - invalid LU identifier")
+SENSE_CODE(0x200A, "Access denied - invalid proxy token")
+SENSE_CODE(0x200B, "Access denied - ACL LUN conflict")
+SENSE_CODE(0x200C, "Illegal command when not in append-only mode")
+
+SENSE_CODE(0x2100, "Logical block address out of range")
+SENSE_CODE(0x2101, "Invalid element address")
+SENSE_CODE(0x2102, "Invalid address for write")
+SENSE_CODE(0x2103, "Invalid write crossing layer jump")
+SENSE_CODE(0x2104, "Unaligned write command")
+SENSE_CODE(0x2105, "Write boundary violation")
+SENSE_CODE(0x2106, "Attempt to read invalid data")
+SENSE_CODE(0x2107, "Read boundary violation")
+
+SENSE_CODE(0x2200, "Illegal function (use 20 00, 24 00, or 26 00)")
+
+SENSE_CODE(0x2300, "Invalid token operation, cause not reportable")
+SENSE_CODE(0x2301, "Invalid token operation, unsupported token type")
+SENSE_CODE(0x2302, "Invalid token operation, remote token usage not supported")
+SENSE_CODE(0x2303, "Invalid token operation, remote rod token creation not "
+ "supported")
+SENSE_CODE(0x2304, "Invalid token operation, token unknown")
+SENSE_CODE(0x2305, "Invalid token operation, token corrupt")
+SENSE_CODE(0x2306, "Invalid token operation, token revoked")
+SENSE_CODE(0x2307, "Invalid token operation, token expired")
+SENSE_CODE(0x2308, "Invalid token operation, token cancelled")
+SENSE_CODE(0x2309, "Invalid token operation, token deleted")
+SENSE_CODE(0x230A, "Invalid token operation, invalid token length")
+
+SENSE_CODE(0x2400, "Invalid field in cdb")
+SENSE_CODE(0x2401, "CDB decryption error")
+SENSE_CODE(0x2402, "Obsolete")
+SENSE_CODE(0x2403, "Obsolete")
+SENSE_CODE(0x2404, "Security audit value frozen")
+SENSE_CODE(0x2405, "Security working key frozen")
+SENSE_CODE(0x2406, "Nonce not unique")
+SENSE_CODE(0x2407, "Nonce timestamp out of range")
+SENSE_CODE(0x2408, "Invalid XCDB")
+
+SENSE_CODE(0x2500, "Logical unit not supported")
+
+SENSE_CODE(0x2600, "Invalid field in parameter list")
+SENSE_CODE(0x2601, "Parameter not supported")
+SENSE_CODE(0x2602, "Parameter value invalid")
+SENSE_CODE(0x2603, "Threshold parameters not supported")
+SENSE_CODE(0x2604, "Invalid release of persistent reservation")
+SENSE_CODE(0x2605, "Data decryption error")
+SENSE_CODE(0x2606, "Too many target descriptors")
+SENSE_CODE(0x2607, "Unsupported target descriptor type code")
+SENSE_CODE(0x2608, "Too many segment descriptors")
+SENSE_CODE(0x2609, "Unsupported segment descriptor type code")
+SENSE_CODE(0x260A, "Unexpected inexact segment")
+SENSE_CODE(0x260B, "Inline data length exceeded")
+SENSE_CODE(0x260C, "Invalid operation for copy source or destination")
+SENSE_CODE(0x260D, "Copy segment granularity violation")
+SENSE_CODE(0x260E, "Invalid parameter while port is enabled")
+SENSE_CODE(0x260F, "Invalid data-out buffer integrity check value")
+SENSE_CODE(0x2610, "Data decryption key fail limit reached")
+SENSE_CODE(0x2611, "Incomplete key-associated data set")
+SENSE_CODE(0x2612, "Vendor specific key reference not found")
+
+SENSE_CODE(0x2700, "Write protected")
+SENSE_CODE(0x2701, "Hardware write protected")
+SENSE_CODE(0x2702, "Logical unit software write protected")
+SENSE_CODE(0x2703, "Associated write protect")
+SENSE_CODE(0x2704, "Persistent write protect")
+SENSE_CODE(0x2705, "Permanent write protect")
+SENSE_CODE(0x2706, "Conditional write protect")
+SENSE_CODE(0x2707, "Space allocation failed write protect")
+SENSE_CODE(0x2708, "Zone is read only")
+
+SENSE_CODE(0x2800, "Not ready to ready change, medium may have changed")
+SENSE_CODE(0x2801, "Import or export element accessed")
+SENSE_CODE(0x2802, "Format-layer may have changed")
+SENSE_CODE(0x2803, "Import/export element accessed, medium changed")
+
+SENSE_CODE(0x2900, "Power on, reset, or bus device reset occurred")
+SENSE_CODE(0x2901, "Power on occurred")
+SENSE_CODE(0x2902, "Scsi bus reset occurred")
+SENSE_CODE(0x2903, "Bus device reset function occurred")
+SENSE_CODE(0x2904, "Device internal reset")
+SENSE_CODE(0x2905, "Transceiver mode changed to single-ended")
+SENSE_CODE(0x2906, "Transceiver mode changed to lvd")
+SENSE_CODE(0x2907, "I_T nexus loss occurred")
+
+SENSE_CODE(0x2A00, "Parameters changed")
+SENSE_CODE(0x2A01, "Mode parameters changed")
+SENSE_CODE(0x2A02, "Log parameters changed")
+SENSE_CODE(0x2A03, "Reservations preempted")
+SENSE_CODE(0x2A04, "Reservations released")
+SENSE_CODE(0x2A05, "Registrations preempted")
+SENSE_CODE(0x2A06, "Asymmetric access state changed")
+SENSE_CODE(0x2A07, "Implicit asymmetric access state transition failed")
+SENSE_CODE(0x2A08, "Priority changed")
+SENSE_CODE(0x2A09, "Capacity data has changed")
+SENSE_CODE(0x2A0A, "Error history I_T nexus cleared")
+SENSE_CODE(0x2A0B, "Error history snapshot released")
+SENSE_CODE(0x2A0C, "Error recovery attributes have changed")
+SENSE_CODE(0x2A0D, "Data encryption capabilities changed")
+SENSE_CODE(0x2A10, "Timestamp changed")
+SENSE_CODE(0x2A11, "Data encryption parameters changed by another i_t nexus")
+SENSE_CODE(0x2A12, "Data encryption parameters changed by vendor specific "
+	 "event")
+SENSE_CODE(0x2A13, "Data encryption key instance counter has changed")
+SENSE_CODE(0x2A14, "SA creation capabilities data has changed")
+SENSE_CODE(0x2A15, "Medium removal prevention preempted")
+
+SENSE_CODE(0x2B00, "Copy cannot execute since host cannot disconnect")
+
+SENSE_CODE(0x2C00, "Command sequence error")
+SENSE_CODE(0x2C01, "Too many windows specified")
+SENSE_CODE(0x2C02, "Invalid combination of windows specified")
+SENSE_CODE(0x2C03, "Current program area is not empty")
+SENSE_CODE(0x2C04, "Current program area is empty")
+SENSE_CODE(0x2C05, "Illegal power condition request")
+SENSE_CODE(0x2C06, "Persistent prevent conflict")
+SENSE_CODE(0x2C07, "Previous busy status")
+SENSE_CODE(0x2C08, "Previous task set full status")
+SENSE_CODE(0x2C09, "Previous reservation conflict status")
+SENSE_CODE(0x2C0A, "Partition or collection contains user objects")
+SENSE_CODE(0x2C0B, "Not reserved")
+SENSE_CODE(0x2C0C, "Orwrite generation does not match")
+SENSE_CODE(0x2C0D, "Reset write pointer not allowed")
+SENSE_CODE(0x2C0E, "Zone is offline")
+
+SENSE_CODE(0x2D00, "Overwrite error on update in place")
+
+SENSE_CODE(0x2E00, "Insufficient time for operation")
+SENSE_CODE(0x2E01, "Command timeout before processing")
+SENSE_CODE(0x2E02, "Command timeout during processing")
+SENSE_CODE(0x2E03, "Command timeout during processing due to error recovery")
+
+SENSE_CODE(0x2F00, "Commands cleared by another initiator")
+SENSE_CODE(0x2F01, "Commands cleared by power loss notification")
+SENSE_CODE(0x2F02, "Commands cleared by device server")
+SENSE_CODE(0x2F03, "Some commands cleared by queuing layer event")
+
+SENSE_CODE(0x3000, "Incompatible medium installed")
+SENSE_CODE(0x3001, "Cannot read medium - unknown format")
+SENSE_CODE(0x3002, "Cannot read medium - incompatible format")
+SENSE_CODE(0x3003, "Cleaning cartridge installed")
+SENSE_CODE(0x3004, "Cannot write medium - unknown format")
+SENSE_CODE(0x3005, "Cannot write medium - incompatible format")
+SENSE_CODE(0x3006, "Cannot format medium - incompatible medium")
+SENSE_CODE(0x3007, "Cleaning failure")
+SENSE_CODE(0x3008, "Cannot write - application code mismatch")
+SENSE_CODE(0x3009, "Current session not fixated for append")
+SENSE_CODE(0x300A, "Cleaning request rejected")
+SENSE_CODE(0x300C, "WORM medium - overwrite attempted")
+SENSE_CODE(0x300D, "WORM medium - integrity check")
+SENSE_CODE(0x3010, "Medium not formatted")
+SENSE_CODE(0x3011, "Incompatible volume type")
+SENSE_CODE(0x3012, "Incompatible volume qualifier")
+SENSE_CODE(0x3013, "Cleaning volume expired")
+
+SENSE_CODE(0x3100, "Medium format corrupted")
+SENSE_CODE(0x3101, "Format command failed")
+SENSE_CODE(0x3102, "Zoned formatting failed due to spare linking")
+SENSE_CODE(0x3103, "Sanitize command failed")
+
+SENSE_CODE(0x3200, "No defect spare location available")
+SENSE_CODE(0x3201, "Defect list update failure")
+
+SENSE_CODE(0x3300, "Tape length error")
+
+SENSE_CODE(0x3400, "Enclosure failure")
+
+SENSE_CODE(0x3500, "Enclosure services failure")
+SENSE_CODE(0x3501, "Unsupported enclosure function")
+SENSE_CODE(0x3502, "Enclosure services unavailable")
+SENSE_CODE(0x3503, "Enclosure services transfer failure")
+SENSE_CODE(0x3504, "Enclosure services transfer refused")
+SENSE_CODE(0x3505, "Enclosure services checksum error")
+
+SENSE_CODE(0x3600, "Ribbon, ink, or toner failure")
+
+SENSE_CODE(0x3700, "Rounded parameter")
+
+SENSE_CODE(0x3800, "Event status notification")
+SENSE_CODE(0x3802, "Esn - power management class event")
+SENSE_CODE(0x3804, "Esn - media class event")
+SENSE_CODE(0x3806, "Esn - device busy class event")
+SENSE_CODE(0x3807, "Thin Provisioning soft threshold reached")
+
+SENSE_CODE(0x3900, "Saving parameters not supported")
+
+SENSE_CODE(0x3A00, "Medium not present")
+SENSE_CODE(0x3A01, "Medium not present - tray closed")
+SENSE_CODE(0x3A02, "Medium not present - tray open")
+SENSE_CODE(0x3A03, "Medium not present - loadable")
+SENSE_CODE(0x3A04, "Medium not present - medium auxiliary memory accessible")
+
+SENSE_CODE(0x3B00, "Sequential positioning error")
+SENSE_CODE(0x3B01, "Tape position error at beginning-of-medium")
+SENSE_CODE(0x3B02, "Tape position error at end-of-medium")
+SENSE_CODE(0x3B03, "Tape or electronic vertical forms unit not ready")
+SENSE_CODE(0x3B04, "Slew failure")
+SENSE_CODE(0x3B05, "Paper jam")
+SENSE_CODE(0x3B06, "Failed to sense top-of-form")
+SENSE_CODE(0x3B07, "Failed to sense bottom-of-form")
+SENSE_CODE(0x3B08, "Reposition error")
+SENSE_CODE(0x3B09, "Read past end of medium")
+SENSE_CODE(0x3B0A, "Read past beginning of medium")
+SENSE_CODE(0x3B0B, "Position past end of medium")
+SENSE_CODE(0x3B0C, "Position past beginning of medium")
+SENSE_CODE(0x3B0D, "Medium destination element full")
+SENSE_CODE(0x3B0E, "Medium source element empty")
+SENSE_CODE(0x3B0F, "End of medium reached")
+SENSE_CODE(0x3B11, "Medium magazine not accessible")
+SENSE_CODE(0x3B12, "Medium magazine removed")
+SENSE_CODE(0x3B13, "Medium magazine inserted")
+SENSE_CODE(0x3B14, "Medium magazine locked")
+SENSE_CODE(0x3B15, "Medium magazine unlocked")
+SENSE_CODE(0x3B16, "Mechanical positioning or changer error")
+SENSE_CODE(0x3B17, "Read past end of user object")
+SENSE_CODE(0x3B18, "Element disabled")
+SENSE_CODE(0x3B19, "Element enabled")
+SENSE_CODE(0x3B1A, "Data transfer device removed")
+SENSE_CODE(0x3B1B, "Data transfer device inserted")
+SENSE_CODE(0x3B1C, "Too many logical objects on partition to support "
+ "operation")
+
+SENSE_CODE(0x3D00, "Invalid bits in identify message")
+
+SENSE_CODE(0x3E00, "Logical unit has not self-configured yet")
+SENSE_CODE(0x3E01, "Logical unit failure")
+SENSE_CODE(0x3E02, "Timeout on logical unit")
+SENSE_CODE(0x3E03, "Logical unit failed self-test")
+SENSE_CODE(0x3E04, "Logical unit unable to update self-test log")
+
+SENSE_CODE(0x3F00, "Target operating conditions have changed")
+SENSE_CODE(0x3F01, "Microcode has been changed")
+SENSE_CODE(0x3F02, "Changed operating definition")
+SENSE_CODE(0x3F03, "Inquiry data has changed")
+SENSE_CODE(0x3F04, "Component device attached")
+SENSE_CODE(0x3F05, "Device identifier changed")
+SENSE_CODE(0x3F06, "Redundancy group created or modified")
+SENSE_CODE(0x3F07, "Redundancy group deleted")
+SENSE_CODE(0x3F08, "Spare created or modified")
+SENSE_CODE(0x3F09, "Spare deleted")
+SENSE_CODE(0x3F0A, "Volume set created or modified")
+SENSE_CODE(0x3F0B, "Volume set deleted")
+SENSE_CODE(0x3F0C, "Volume set deassigned")
+SENSE_CODE(0x3F0D, "Volume set reassigned")
+SENSE_CODE(0x3F0E, "Reported luns data has changed")
+SENSE_CODE(0x3F0F, "Echo buffer overwritten")
+SENSE_CODE(0x3F10, "Medium loadable")
+SENSE_CODE(0x3F11, "Medium auxiliary memory accessible")
+SENSE_CODE(0x3F12, "iSCSI IP address added")
+SENSE_CODE(0x3F13, "iSCSI IP address removed")
+SENSE_CODE(0x3F14, "iSCSI IP address changed")
+SENSE_CODE(0x3F15, "Inspect referrals sense descriptors")
+SENSE_CODE(0x3F16, "Microcode has been changed without reset")
+/*
+ *	SENSE_CODE(0x40NN, "Ram failure")
+ *	SENSE_CODE(0x40NN, "Diagnostic failure on component nn")
+ *	SENSE_CODE(0x41NN, "Data path failure")
+ *	SENSE_CODE(0x42NN, "Power-on or self-test failure")
+ */
+SENSE_CODE(0x4300, "Message error")
+
+SENSE_CODE(0x4400, "Internal target failure")
+SENSE_CODE(0x4401, "Persistent reservation information lost")
+SENSE_CODE(0x4471, "ATA device failed set features")
+
+SENSE_CODE(0x4500, "Select or reselect failure")
+
+SENSE_CODE(0x4600, "Unsuccessful soft reset")
+
+SENSE_CODE(0x4700, "Scsi parity error")
+SENSE_CODE(0x4701, "Data phase CRC error detected")
+SENSE_CODE(0x4702, "Scsi parity error detected during st data phase")
+SENSE_CODE(0x4703, "Information unit iuCRC error detected")
+SENSE_CODE(0x4704, "Asynchronous information protection error detected")
+SENSE_CODE(0x4705, "Protocol service CRC error")
+SENSE_CODE(0x4706, "Phy test function in progress")
+SENSE_CODE(0x477f, "Some commands cleared by iSCSI Protocol event")
+
+SENSE_CODE(0x4800, "Initiator detected error message received")
+
+SENSE_CODE(0x4900, "Invalid message error")
+
+SENSE_CODE(0x4A00, "Command phase error")
+
+SENSE_CODE(0x4B00, "Data phase error")
+SENSE_CODE(0x4B01, "Invalid target port transfer tag received")
+SENSE_CODE(0x4B02, "Too much write data")
+SENSE_CODE(0x4B03, "Ack/nak timeout")
+SENSE_CODE(0x4B04, "Nak received")
+SENSE_CODE(0x4B05, "Data offset error")
+SENSE_CODE(0x4B06, "Initiator response timeout")
+SENSE_CODE(0x4B07, "Connection lost")
+SENSE_CODE(0x4B08, "Data-in buffer overflow - data buffer size")
+SENSE_CODE(0x4B09, "Data-in buffer overflow - data buffer descriptor area")
+SENSE_CODE(0x4B0A, "Data-in buffer error")
+SENSE_CODE(0x4B0B, "Data-out buffer overflow - data buffer size")
+SENSE_CODE(0x4B0C, "Data-out buffer overflow - data buffer descriptor area")
+SENSE_CODE(0x4B0D, "Data-out buffer error")
+SENSE_CODE(0x4B0E, "PCIe fabric error")
+SENSE_CODE(0x4B0F, "PCIe completion timeout")
+SENSE_CODE(0x4B10, "PCIe completer abort")
+SENSE_CODE(0x4B11, "PCIe poisoned tlp received")
+SENSE_CODE(0x4B12, "PCIe eCRC check failed")
+SENSE_CODE(0x4B13, "PCIe unsupported request")
+SENSE_CODE(0x4B14, "PCIe acs violation")
+SENSE_CODE(0x4B15, "PCIe tlp prefix blocked")
+
+SENSE_CODE(0x4C00, "Logical unit failed self-configuration")
+/*
+ *	SENSE_CODE(0x4DNN, "Tagged overlapped commands (nn = queue tag)")
+ */
+SENSE_CODE(0x4E00, "Overlapped commands attempted")
+
+SENSE_CODE(0x5000, "Write append error")
+SENSE_CODE(0x5001, "Write append position error")
+SENSE_CODE(0x5002, "Position error related to timing")
+
+SENSE_CODE(0x5100, "Erase failure")
+SENSE_CODE(0x5101, "Erase failure - incomplete erase operation detected")
+
+SENSE_CODE(0x5200, "Cartridge fault")
+
+SENSE_CODE(0x5300, "Media load or eject failed")
+SENSE_CODE(0x5301, "Unload tape failure")
+SENSE_CODE(0x5302, "Medium removal prevented")
+SENSE_CODE(0x5303, "Medium removal prevented by data transfer element")
+SENSE_CODE(0x5304, "Medium thread or unthread failure")
+SENSE_CODE(0x5305, "Volume identifier invalid")
+SENSE_CODE(0x5306, "Volume identifier missing")
+SENSE_CODE(0x5307, "Duplicate volume identifier")
+SENSE_CODE(0x5308, "Element status unknown")
+SENSE_CODE(0x5309, "Data transfer device error - load failed")
+SENSE_CODE(0x530a, "Data transfer device error - unload failed")
+SENSE_CODE(0x530b, "Data transfer device error - unload missing")
+SENSE_CODE(0x530c, "Data transfer device error - eject failed")
+SENSE_CODE(0x530d, "Data transfer device error - library communication failed")
+
+SENSE_CODE(0x5400, "Scsi to host system interface failure")
+
+SENSE_CODE(0x5500, "System resource failure")
+SENSE_CODE(0x5501, "System buffer full")
+SENSE_CODE(0x5502, "Insufficient reservation resources")
+SENSE_CODE(0x5503, "Insufficient resources")
+SENSE_CODE(0x5504, "Insufficient registration resources")
+SENSE_CODE(0x5505, "Insufficient access control resources")
+SENSE_CODE(0x5506, "Auxiliary memory out of space")
+SENSE_CODE(0x5507, "Quota error")
+SENSE_CODE(0x5508, "Maximum number of supplemental decryption keys exceeded")
+SENSE_CODE(0x5509, "Medium auxiliary memory not accessible")
+SENSE_CODE(0x550A, "Data currently unavailable")
+SENSE_CODE(0x550B, "Insufficient power for operation")
+SENSE_CODE(0x550C, "Insufficient resources to create rod")
+SENSE_CODE(0x550D, "Insufficient resources to create rod token")
+SENSE_CODE(0x550E, "Insufficient zone resources")
+
+SENSE_CODE(0x5700, "Unable to recover table-of-contents")
+
+SENSE_CODE(0x5800, "Generation does not exist")
+
+SENSE_CODE(0x5900, "Updated block read")
+
+SENSE_CODE(0x5A00, "Operator request or state change input")
+SENSE_CODE(0x5A01, "Operator medium removal request")
+SENSE_CODE(0x5A02, "Operator selected write protect")
+SENSE_CODE(0x5A03, "Operator selected write permit")
+
+SENSE_CODE(0x5B00, "Log exception")
+SENSE_CODE(0x5B01, "Threshold condition met")
+SENSE_CODE(0x5B02, "Log counter at maximum")
+SENSE_CODE(0x5B03, "Log list codes exhausted")
+
+SENSE_CODE(0x5C00, "Rpl status change")
+SENSE_CODE(0x5C01, "Spindles synchronized")
+SENSE_CODE(0x5C02, "Spindles not synchronized")
+
+SENSE_CODE(0x5D00, "Failure prediction threshold exceeded")
+SENSE_CODE(0x5D01, "Media failure prediction threshold exceeded")
+SENSE_CODE(0x5D02, "Logical unit failure prediction threshold exceeded")
+SENSE_CODE(0x5D03, "Spare area exhaustion prediction threshold exceeded")
+SENSE_CODE(0x5D10, "Hardware impending failure general hard drive failure")
+SENSE_CODE(0x5D11, "Hardware impending failure drive error rate too high")
+SENSE_CODE(0x5D12, "Hardware impending failure data error rate too high")
+SENSE_CODE(0x5D13, "Hardware impending failure seek error rate too high")
+SENSE_CODE(0x5D14, "Hardware impending failure too many block reassigns")
+SENSE_CODE(0x5D15, "Hardware impending failure access times too high")
+SENSE_CODE(0x5D16, "Hardware impending failure start unit times too high")
+SENSE_CODE(0x5D17, "Hardware impending failure channel parametrics")
+SENSE_CODE(0x5D18, "Hardware impending failure controller detected")
+SENSE_CODE(0x5D19, "Hardware impending failure throughput performance")
+SENSE_CODE(0x5D1A, "Hardware impending failure seek time performance")
+SENSE_CODE(0x5D1B, "Hardware impending failure spin-up retry count")
+SENSE_CODE(0x5D1C, "Hardware impending failure drive calibration retry count")
+SENSE_CODE(0x5D20, "Controller impending failure general hard drive failure")
+SENSE_CODE(0x5D21, "Controller impending failure drive error rate too high")
+SENSE_CODE(0x5D22, "Controller impending failure data error rate too high")
+SENSE_CODE(0x5D23, "Controller impending failure seek error rate too high")
+SENSE_CODE(0x5D24, "Controller impending failure too many block reassigns")
+SENSE_CODE(0x5D25, "Controller impending failure access times too high")
+SENSE_CODE(0x5D26, "Controller impending failure start unit times too high")
+SENSE_CODE(0x5D27, "Controller impending failure channel parametrics")
+SENSE_CODE(0x5D28, "Controller impending failure controller detected")
+SENSE_CODE(0x5D29, "Controller impending failure throughput performance")
+SENSE_CODE(0x5D2A, "Controller impending failure seek time performance")
+SENSE_CODE(0x5D2B, "Controller impending failure spin-up retry count")
+SENSE_CODE(0x5D2C, "Controller impending failure drive calibration retry count")
+SENSE_CODE(0x5D30, "Data channel impending failure general hard drive failure")
+SENSE_CODE(0x5D31, "Data channel impending failure drive error rate too high")
+SENSE_CODE(0x5D32, "Data channel impending failure data error rate too high")
+SENSE_CODE(0x5D33, "Data channel impending failure seek error rate too high")
+SENSE_CODE(0x5D34, "Data channel impending failure too many block reassigns")
+SENSE_CODE(0x5D35, "Data channel impending failure access times too high")
+SENSE_CODE(0x5D36, "Data channel impending failure start unit times too high")
+SENSE_CODE(0x5D37, "Data channel impending failure channel parametrics")
+SENSE_CODE(0x5D38, "Data channel impending failure controller detected")
+SENSE_CODE(0x5D39, "Data channel impending failure throughput performance")
+SENSE_CODE(0x5D3A, "Data channel impending failure seek time performance")
+SENSE_CODE(0x5D3B, "Data channel impending failure spin-up retry count")
+SENSE_CODE(0x5D3C, "Data channel impending failure drive calibration retry "
+ "count")
+SENSE_CODE(0x5D40, "Servo impending failure general hard drive failure")
+SENSE_CODE(0x5D41, "Servo impending failure drive error rate too high")
+SENSE_CODE(0x5D42, "Servo impending failure data error rate too high")
+SENSE_CODE(0x5D43, "Servo impending failure seek error rate too high")
+SENSE_CODE(0x5D44, "Servo impending failure too many block reassigns")
+SENSE_CODE(0x5D45, "Servo impending failure access times too high")
+SENSE_CODE(0x5D46, "Servo impending failure start unit times too high")
+SENSE_CODE(0x5D47, "Servo impending failure channel parametrics")
+SENSE_CODE(0x5D48, "Servo impending failure controller detected")
+SENSE_CODE(0x5D49, "Servo impending failure throughput performance")
+SENSE_CODE(0x5D4A, "Servo impending failure seek time performance")
+SENSE_CODE(0x5D4B, "Servo impending failure spin-up retry count")
+SENSE_CODE(0x5D4C, "Servo impending failure drive calibration retry count")
+SENSE_CODE(0x5D50, "Spindle impending failure general hard drive failure")
+SENSE_CODE(0x5D51, "Spindle impending failure drive error rate too high")
+SENSE_CODE(0x5D52, "Spindle impending failure data error rate too high")
+SENSE_CODE(0x5D53, "Spindle impending failure seek error rate too high")
+SENSE_CODE(0x5D54, "Spindle impending failure too many block reassigns")
+SENSE_CODE(0x5D55, "Spindle impending failure access times too high")
+SENSE_CODE(0x5D56, "Spindle impending failure start unit times too high")
+SENSE_CODE(0x5D57, "Spindle impending failure channel parametrics")
+SENSE_CODE(0x5D58, "Spindle impending failure controller detected")
+SENSE_CODE(0x5D59, "Spindle impending failure throughput performance")
+SENSE_CODE(0x5D5A, "Spindle impending failure seek time performance")
+SENSE_CODE(0x5D5B, "Spindle impending failure spin-up retry count")
+SENSE_CODE(0x5D5C, "Spindle impending failure drive calibration retry count")
+SENSE_CODE(0x5D60, "Firmware impending failure general hard drive failure")
+SENSE_CODE(0x5D61, "Firmware impending failure drive error rate too high")
+SENSE_CODE(0x5D62, "Firmware impending failure data error rate too high")
+SENSE_CODE(0x5D63, "Firmware impending failure seek error rate too high")
+SENSE_CODE(0x5D64, "Firmware impending failure too many block reassigns")
+SENSE_CODE(0x5D65, "Firmware impending failure access times too high")
+SENSE_CODE(0x5D66, "Firmware impending failure start unit times too high")
+SENSE_CODE(0x5D67, "Firmware impending failure channel parametrics")
+SENSE_CODE(0x5D68, "Firmware impending failure controller detected")
+SENSE_CODE(0x5D69, "Firmware impending failure throughput performance")
+SENSE_CODE(0x5D6A, "Firmware impending failure seek time performance")
+SENSE_CODE(0x5D6B, "Firmware impending failure spin-up retry count")
+SENSE_CODE(0x5D6C, "Firmware impending failure drive calibration retry count")
+SENSE_CODE(0x5DFF, "Failure prediction threshold exceeded (false)")
+
+SENSE_CODE(0x5E00, "Low power condition on")
+SENSE_CODE(0x5E01, "Idle condition activated by timer")
+SENSE_CODE(0x5E02, "Standby condition activated by timer")
+SENSE_CODE(0x5E03, "Idle condition activated by command")
+SENSE_CODE(0x5E04, "Standby condition activated by command")
+SENSE_CODE(0x5E05, "Idle_b condition activated by timer")
+SENSE_CODE(0x5E06, "Idle_b condition activated by command")
+SENSE_CODE(0x5E07, "Idle_c condition activated by timer")
+SENSE_CODE(0x5E08, "Idle_c condition activated by command")
+SENSE_CODE(0x5E09, "Standby_y condition activated by timer")
+SENSE_CODE(0x5E0A, "Standby_y condition activated by command")
+SENSE_CODE(0x5E41, "Power state change to active")
+SENSE_CODE(0x5E42, "Power state change to idle")
+SENSE_CODE(0x5E43, "Power state change to standby")
+SENSE_CODE(0x5E45, "Power state change to sleep")
+SENSE_CODE(0x5E47, "Power state change to device control")
+
+SENSE_CODE(0x6000, "Lamp failure")
+
+SENSE_CODE(0x6100, "Video acquisition error")
+SENSE_CODE(0x6101, "Unable to acquire video")
+SENSE_CODE(0x6102, "Out of focus")
+
+SENSE_CODE(0x6200, "Scan head positioning error")
+
+SENSE_CODE(0x6300, "End of user area encountered on this track")
+SENSE_CODE(0x6301, "Packet does not fit in available space")
+
+SENSE_CODE(0x6400, "Illegal mode for this track")
+SENSE_CODE(0x6401, "Invalid packet size")
+
+SENSE_CODE(0x6500, "Voltage fault")
+
+SENSE_CODE(0x6600, "Automatic document feeder cover up")
+SENSE_CODE(0x6601, "Automatic document feeder lift up")
+SENSE_CODE(0x6602, "Document jam in automatic document feeder")
+SENSE_CODE(0x6603, "Document miss feed automatic in document feeder")
+
+SENSE_CODE(0x6700, "Configuration failure")
+SENSE_CODE(0x6701, "Configuration of incapable logical units failed")
+SENSE_CODE(0x6702, "Add logical unit failed")
+SENSE_CODE(0x6703, "Modification of logical unit failed")
+SENSE_CODE(0x6704, "Exchange of logical unit failed")
+SENSE_CODE(0x6705, "Remove of logical unit failed")
+SENSE_CODE(0x6706, "Attachment of logical unit failed")
+SENSE_CODE(0x6707, "Creation of logical unit failed")
+SENSE_CODE(0x6708, "Assign failure occurred")
+SENSE_CODE(0x6709, "Multiply assigned logical unit")
+SENSE_CODE(0x670A, "Set target port groups command failed")
+SENSE_CODE(0x670B, "ATA device feature not enabled")
+
+SENSE_CODE(0x6800, "Logical unit not configured")
+SENSE_CODE(0x6801, "Subsidiary logical unit not configured")
+
+SENSE_CODE(0x6900, "Data loss on logical unit")
+SENSE_CODE(0x6901, "Multiple logical unit failures")
+SENSE_CODE(0x6902, "Parity/data mismatch")
+
+SENSE_CODE(0x6A00, "Informational, refer to log")
+
+SENSE_CODE(0x6B00, "State change has occurred")
+SENSE_CODE(0x6B01, "Redundancy level got better")
+SENSE_CODE(0x6B02, "Redundancy level got worse")
+
+SENSE_CODE(0x6C00, "Rebuild failure occurred")
+
+SENSE_CODE(0x6D00, "Recalculate failure occurred")
+
+SENSE_CODE(0x6E00, "Command to logical unit failed")
+
+SENSE_CODE(0x6F00, "Copy protection key exchange failure - authentication "
+ "failure")
+SENSE_CODE(0x6F01, "Copy protection key exchange failure - key not present")
+SENSE_CODE(0x6F02, "Copy protection key exchange failure - key not established")
+SENSE_CODE(0x6F03, "Read of scrambled sector without authentication")
+SENSE_CODE(0x6F04, "Media region code is mismatched to logical unit region")
+SENSE_CODE(0x6F05, "Drive region must be permanent/region reset count error")
+SENSE_CODE(0x6F06, "Insufficient block count for binding nonce recording")
+SENSE_CODE(0x6F07, "Conflict in binding nonce recording")
+/*
+ *	SENSE_CODE(0x70NN, "Decompression exception short algorithm id of nn")
+ */
+SENSE_CODE(0x7100, "Decompression exception long algorithm id")
+
+SENSE_CODE(0x7200, "Session fixation error")
+SENSE_CODE(0x7201, "Session fixation error writing lead-in")
+SENSE_CODE(0x7202, "Session fixation error writing lead-out")
+SENSE_CODE(0x7203, "Session fixation error - incomplete track in session")
+SENSE_CODE(0x7204, "Empty or partially written reserved track")
+SENSE_CODE(0x7205, "No more track reservations allowed")
+SENSE_CODE(0x7206, "RMZ extension is not allowed")
+SENSE_CODE(0x7207, "No more test zone extensions are allowed")
+
+SENSE_CODE(0x7300, "Cd control error")
+SENSE_CODE(0x7301, "Power calibration area almost full")
+SENSE_CODE(0x7302, "Power calibration area is full")
+SENSE_CODE(0x7303, "Power calibration area error")
+SENSE_CODE(0x7304, "Program memory area update failure")
+SENSE_CODE(0x7305, "Program memory area is full")
+SENSE_CODE(0x7306, "RMA/PMA is almost full")
+SENSE_CODE(0x7310, "Current power calibration area almost full")
+SENSE_CODE(0x7311, "Current power calibration area is full")
+SENSE_CODE(0x7317, "RDZ is full")
+
+SENSE_CODE(0x7400, "Security error")
+SENSE_CODE(0x7401, "Unable to decrypt data")
+SENSE_CODE(0x7402, "Unencrypted data encountered while decrypting")
+SENSE_CODE(0x7403, "Incorrect data encryption key")
+SENSE_CODE(0x7404, "Cryptographic integrity validation failed")
+SENSE_CODE(0x7405, "Error decrypting data")
+SENSE_CODE(0x7406, "Unknown signature verification key")
+SENSE_CODE(0x7407, "Encryption parameters not useable")
+SENSE_CODE(0x7408, "Digital signature validation failure")
+SENSE_CODE(0x7409, "Encryption mode mismatch on read")
+SENSE_CODE(0x740A, "Encrypted block not raw read enabled")
+SENSE_CODE(0x740B, "Incorrect Encryption parameters")
+SENSE_CODE(0x740C, "Unable to decrypt parameter list")
+SENSE_CODE(0x740D, "Encryption algorithm disabled")
+SENSE_CODE(0x7410, "SA creation parameter value invalid")
+SENSE_CODE(0x7411, "SA creation parameter value rejected")
+SENSE_CODE(0x7412, "Invalid SA usage")
+SENSE_CODE(0x7421, "Data Encryption configuration prevented")
+SENSE_CODE(0x7430, "SA creation parameter not supported")
+SENSE_CODE(0x7440, "Authentication failed")
+SENSE_CODE(0x7461, "External data encryption key manager access error")
+SENSE_CODE(0x7462, "External data encryption key manager error")
+SENSE_CODE(0x7463, "External data encryption key not found")
+SENSE_CODE(0x7464, "External data encryption request not authorized")
+SENSE_CODE(0x746E, "External data encryption control timeout")
+SENSE_CODE(0x746F, "External data encryption control error")
+SENSE_CODE(0x7471, "Logical unit access not authorized")
+SENSE_CODE(0x7479, "Security conflict in translated device")
+
+SENSE_CODE(0, NULL)
-- 
2.1.3


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* [PATCH 2/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k
  2015-10-05  9:26       ` [PATCH 0/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k Rasmus Villemoes
  2015-10-05  9:26         ` [PATCH 1/2] scsi: move Additional Sense Codes to separate file Rasmus Villemoes
@ 2015-10-05  9:26         ` Rasmus Villemoes
  2015-10-05 14:11           ` Bart Van Assche
  1 sibling, 1 reply; 15+ messages in thread
From: Rasmus Villemoes @ 2015-10-05  9:26 UTC (permalink / raw)
  To: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley
  Cc: linux-scsi, linux-kernel, Rasmus Villemoes

On 64 bit, struct error_info has 6 bytes of padding, which amounts to
over 4k of wasted space in the additional[] array. We could easily get
rid of that by instead using separate arrays for the codes and the
pointers. However, we can do even better than that and save an
additional 6 bytes per entry: In the table, just store the sizeof()
the corresponding string literal. The cumulative sum of these is then
the appropriate offset into additional_text, which is built from the
concatenation (with '\0's inbetween) of the strings.

$ scripts/bloat-o-meter /tmp/vmlinux vmlinux
add/remove: 0/0 grow/shrink: 1/1 up/down: 24/-8488 (-8464)
function                                     old     new   delta
scsi_extd_sense_format                       136     160     +24
additional                                 11312    2824   -8488

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 drivers/scsi/constants.c   | 25 +++++++++++++++++++++----
 drivers/scsi/sense_codes.h |  2 --
 2 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 47aaccd5e68e..ccd34b0481cd 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -292,17 +292,31 @@ bool scsi_opcode_sa_name(int opcode, int service_action,
 
 struct error_info {
 	unsigned short code12;	/* 0x0302 looks better than 0x03,0x02 */
-	const char * text;
+	unsigned short size;
 };
 
 
+/*
+ * There are 700+ entries in this table. To save space, we don't store
+ * (code, pointer) pairs, which would make sizeof(struct
+ * error_info)==16 on 64 bits. Rather, the second element just stores
+ * the size (including \0) of the corresponding string, and we use the
+ * sum of these to get the appropriate offset into additional_text
+ * defined below. This approach saves 12 bytes per entry.
+ */
 static const struct error_info additional[] =
 {
-#define SENSE_CODE(c, s) {c, s},
+#define SENSE_CODE(c, s) {c, sizeof(s)},
 #include "sense_codes.h"
 #undef SENSE_CODE
 };
 
+static const char *additional_text =
+#define SENSE_CODE(c, s) s "\0"
+#include "sense_codes.h"
+#undef SENSE_CODE
+	;
+
 struct error_info2 {
 	unsigned char code1, code2_min, code2_max;
 	const char * str;
@@ -364,11 +378,14 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
 {
 	int i;
 	unsigned short code = ((asc << 8) | ascq);
+	unsigned offset = 0;
 
 	*fmt = NULL;
-	for (i = 0; additional[i].text; i++)
+	for (i = 0; i < ARRAY_SIZE(additional); i++) {
 		if (additional[i].code12 == code)
-			return additional[i].text;
+			return additional_text + offset;
+		offset += additional[i].size;
+	}
 	for (i = 0; additional2[i].fmt; i++) {
 		if (additional2[i].code1 == asc &&
 		    ascq >= additional2[i].code2_min &&
diff --git a/drivers/scsi/sense_codes.h b/drivers/scsi/sense_codes.h
index 54b3939d6309..da84d53b3379 100644
--- a/drivers/scsi/sense_codes.h
+++ b/drivers/scsi/sense_codes.h
@@ -833,5 +833,3 @@ SENSE_CODE(0x746E, "External data encryption control timeout")
 SENSE_CODE(0x746F, "External data encryption control error")
 SENSE_CODE(0x7471, "Logical unit access not authorized")
 SENSE_CODE(0x7479, "Security conflict in translated device")
-
-SENSE_CODE(0, NULL)
-- 
2.1.3


^ permalink raw reply related	[flat|nested] 15+ messages in thread

* Re: [PATCH 1/2] scsi: move Additional Sense Codes to separate file
  2015-10-05  9:26         ` [PATCH 1/2] scsi: move Additional Sense Codes to separate file Rasmus Villemoes
@ 2015-10-05 14:05           ` Bart Van Assche
  2015-10-06 15:27             ` Rasmus Villemoes
  0 siblings, 1 reply; 15+ messages in thread
From: Bart Van Assche @ 2015-10-05 14:05 UTC (permalink / raw)
  To: Rasmus Villemoes, Christoph Hellwig, Hannes Reinecke,
	James E.J. Bottomley
  Cc: linux-scsi, linux-kernel

On 10/05/15 02:26, Rasmus Villemoes wrote:
> -	{0x041A, "Logical unit not ready, start stop unit command in "
> -	 "progress"},
> -	{0x041B, "Logical unit not ready, sanitize in progress"},
> -	{0x041C, "Logical unit not ready, additional power use not yet "
> -	 "granted"},

Please convert these multi-line strings into single line string 
constants such that users can look up these easily with grep.

 > +
 > +SENSE_CODE(0, NULL)

The above looks confusing to me. Please leave this out and add { 0, NULL 
} at the end of the additional[] array instead.

Thanks,

Bart.


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 2/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k
  2015-10-05  9:26         ` [PATCH 2/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k Rasmus Villemoes
@ 2015-10-05 14:11           ` Bart Van Assche
  2015-10-06 15:31             ` Rasmus Villemoes
  0 siblings, 1 reply; 15+ messages in thread
From: Bart Van Assche @ 2015-10-05 14:11 UTC (permalink / raw)
  To: Rasmus Villemoes, Christoph Hellwig, Hannes Reinecke,
	James E.J. Bottomley
  Cc: linux-scsi, linux-kernel

On 10/05/15 02:26, Rasmus Villemoes wrote:
>   struct error_info {
>   	unsigned short code12;	/* 0x0302 looks better than 0x03,0x02 */
> -	const char * text;
> +	unsigned short size;
>   };

Had you considered to use the type uint16_t instead of unsigned short ?

Bart.

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k
  2015-10-03 22:09   ` Rasmus Villemoes
  2015-10-04  8:02     ` Christoph Hellwig
@ 2015-10-06  1:32     ` Julian Calaby
  2015-10-06 15:39       ` Rasmus Villemoes
  1 sibling, 1 reply; 15+ messages in thread
From: Julian Calaby @ 2015-10-06  1:32 UTC (permalink / raw)
  To: Rasmus Villemoes
  Cc: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley,
	linux-kernel, linux-scsi

Hi Rasmus,

On Sun, Oct 4, 2015 at 9:09 AM, Rasmus Villemoes
<linux@rasmusvillemoes.dk> wrote:
> Subject: [PATCH 2/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k
>
> On 64 bit, struct error_info has 6 bytes of padding, which amounts to
> over 4k of wasted space in the additional[] array. We could easily get
> rid of that by instead using separate arrays for the codes and the
> pointers. However, we can do even better than that and save an
> additional 6 bytes per entry: In the table, just store the sizeof()
> the corresponding string literal. The cumulative sum of these is then
> the appropriate offset into additional_text, which is built from the
> concatenation (with '\0's inbetween) of the strings.
>
> $ scripts/bloat-o-meter /tmp/vmlinux vmlinux
> add/remove: 0/0 grow/shrink: 1/1 up/down: 24/-8488 (-8464)
> function                                     old     new   delta
> scsi_extd_sense_format                       136     160     +24
> additional                                 11312    2824   -8488

Quick question:

> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
> ---
>  drivers/scsi/constants.c   | 25 +++++++++++++++++++++----
>  drivers/scsi/sense_codes.h |  2 --
>  2 files changed, 21 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
> index 47aaccd5e68e..ccd34b0481cd 100644
> --- a/drivers/scsi/constants.c
> +++ b/drivers/scsi/constants.c
> @@ -292,17 +292,31 @@ bool scsi_opcode_sa_name(int opcode, int service_action,
>
>  struct error_info {
>         unsigned short code12;  /* 0x0302 looks better than 0x03,0x02 */
> -       const char * text;
> +       unsigned short size;
>  };
>
>
> +/*
> + * There are 700+ entries in this table. To save space, we don't store
> + * (code, pointer) pairs, which would make sizeof(struct
> + * error_info)==16 on 64 bits. Rather, the second element just stores
> + * the size (including \0) of the corresponding string, and we use the
> + * sum of these to get the appropriate offset into additional_text
> + * defined below. This approach saves 12 bytes per entry.
> + */
>  static const struct error_info additional[] =
>  {
> -#define SENSE_CODE(c, s) {c, s},
> +#define SENSE_CODE(c, s) {c, sizeof(s)},
>  #include "sense_codes.h"
>  #undef SENSE_CODE
>  };
>
> +static const char *additional_text =
> +#define SENSE_CODE(c, s) s "\0"
> +#include "sense_codes.h"
> +#undef SENSE_CODE
> +       ;
> +
>  struct error_info2 {
>         unsigned char code1, code2_min, code2_max;
>         const char * str;
> @@ -364,11 +378,14 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
>  {
>         int i;
>         unsigned short code = ((asc << 8) | ascq);
> +       unsigned offset = 0;
>
>         *fmt = NULL;
> -       for (i = 0; additional[i].text; i++)
> +       for (i = 0; i < ARRAY_SIZE(additional); i++) {
>                 if (additional[i].code12 == code)
> -                       return additional[i].text;
> +                       return additional_text + offset;
> +               offset += additional[i].size;

You don't seem to be accounting for the null bytes here.

Thanks,

-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 1/2] scsi: move Additional Sense Codes to separate file
  2015-10-05 14:05           ` Bart Van Assche
@ 2015-10-06 15:27             ` Rasmus Villemoes
  2015-10-17 22:12               ` Rasmus Villemoes
  0 siblings, 1 reply; 15+ messages in thread
From: Rasmus Villemoes @ 2015-10-06 15:27 UTC (permalink / raw)
  To: Bart Van Assche
  Cc: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley,
	linux-scsi, linux-kernel

On Mon, Oct 05 2015, Bart Van Assche <bart.vanassche@sandisk.com> wrote:

> On 10/05/15 02:26, Rasmus Villemoes wrote:
>> -	{0x041A, "Logical unit not ready, start stop unit command in "
>> -	 "progress"},
>> -	{0x041B, "Logical unit not ready, sanitize in progress"},
>> -	{0x041C, "Logical unit not ready, additional power use not yet "
>> -	 "granted"},
>
> Please convert these multi-line strings into single line string
> constants such that users can look up these easily with grep.

I can certainly do that, but I'd prefer to do it in a separate patch. I
really want to keep this as mechanical as possible.

>> +
>> +SENSE_CODE(0, NULL)
>
> The above looks confusing to me. Please leave this out and add { 0,
> NULL } at the end of the additional[] array instead.

OK, I agree that that would have been cleaner. However, the sentinel
entry is removed in 2/2 (since we loop using ARRAY_SIZE instead of
checking for the sentinel). Let me know if you want me to resend the
1600 line monster anyway with this addressed.

Thanks,
Rasmus

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 2/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k
  2015-10-05 14:11           ` Bart Van Assche
@ 2015-10-06 15:31             ` Rasmus Villemoes
  0 siblings, 0 replies; 15+ messages in thread
From: Rasmus Villemoes @ 2015-10-06 15:31 UTC (permalink / raw)
  To: Bart Van Assche
  Cc: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley,
	linux-scsi, linux-kernel

On Mon, Oct 05 2015, Bart Van Assche <bart.vanassche@sandisk.com> wrote:

> On 10/05/15 02:26, Rasmus Villemoes wrote:
>>   struct error_info {
>>   	unsigned short code12;	/* 0x0302 looks better than 0x03,0x02 */
>> -	const char * text;
>> +	unsigned short size;
>>   };
>
> Had you considered to use the type uint16_t instead of unsigned short ?
>

Yes, but I thought I'd keep it consistent with the other member. AFAIK,
they're one and the same on all relevant arches. I actually think
spelling it u16 for both members would make sense (for the code because
it explicitly is meant to hold two bytes), but again I think that's
better done as a trivial follow-up patch, if we really want to change this.

Rasmus

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k
  2015-10-06  1:32     ` RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k Julian Calaby
@ 2015-10-06 15:39       ` Rasmus Villemoes
  2015-10-06 23:01         ` Julian Calaby
  0 siblings, 1 reply; 15+ messages in thread
From: Rasmus Villemoes @ 2015-10-06 15:39 UTC (permalink / raw)
  To: Julian Calaby
  Cc: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley,
	linux-kernel, linux-scsi

On Tue, Oct 06 2015, Julian Calaby <julian.calaby@gmail.com> wrote:

> Hi Rasmus,
>
>>
>> diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
>> index 47aaccd5e68e..ccd34b0481cd 100644
>> --- a/drivers/scsi/constants.c
>> +++ b/drivers/scsi/constants.c
>> @@ -292,17 +292,31 @@ bool scsi_opcode_sa_name(int opcode, int service_action,
>>
>>  struct error_info {
>>         unsigned short code12;  /* 0x0302 looks better than 0x03,0x02 */
>> -       const char * text;
>> +       unsigned short size;
>>  };
>>
>>
>> +/*
>> + * There are 700+ entries in this table. To save space, we don't store
>> + * (code, pointer) pairs, which would make sizeof(struct
>> + * error_info)==16 on 64 bits. Rather, the second element just stores
>> + * the size (including \0) of the corresponding string, and we use the
>> + * sum of these to get the appropriate offset into additional_text
>> + * defined below. This approach saves 12 bytes per entry.
>> + */
>>  static const struct error_info additional[] =
>>  {
>> -#define SENSE_CODE(c, s) {c, s},
>> +#define SENSE_CODE(c, s) {c, sizeof(s)},
>>  #include "sense_codes.h"
>>  #undef SENSE_CODE
>>  };
>>
>> +static const char *additional_text =
>> +#define SENSE_CODE(c, s) s "\0"
>> +#include "sense_codes.h"
>> +#undef SENSE_CODE
>> +       ;
>> +
>>  struct error_info2 {
>>         unsigned char code1, code2_min, code2_max;
>>         const char * str;
>> @@ -364,11 +378,14 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
>>  {
>>         int i;
>>         unsigned short code = ((asc << 8) | ascq);
>> +       unsigned offset = 0;
>>
>>         *fmt = NULL;
>> -       for (i = 0; additional[i].text; i++)
>> +       for (i = 0; i < ARRAY_SIZE(additional); i++) {
>>                 if (additional[i].code12 == code)
>> -                       return additional[i].text;
>> +                       return additional_text + offset;
>> +               offset += additional[i].size;
>
> You don't seem to be accounting for the null bytes here.

Well, no, I account for the nul bytes where I define the table (the
comment actually says as much). sizeof("foo") is 4. Since
additional_text ends up pointing to a string containing

"foo" "\0" "xyzzy" "\0" "..." "\0"

aka

"foo\0xyzzy\0...\0"

this is the right amount to skip. As I said in the cover letter, I did
test this (so that I'd at least catch silly off-by-ones), and I do get
the right strings out.

Thanks,
Rasmus

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k
  2015-10-06 15:39       ` Rasmus Villemoes
@ 2015-10-06 23:01         ` Julian Calaby
  0 siblings, 0 replies; 15+ messages in thread
From: Julian Calaby @ 2015-10-06 23:01 UTC (permalink / raw)
  To: Rasmus Villemoes
  Cc: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley,
	linux-kernel, linux-scsi

Hi Rasmus,

On Wed, Oct 7, 2015 at 2:39 AM, Rasmus Villemoes
<linux@rasmusvillemoes.dk> wrote:
> On Tue, Oct 06 2015, Julian Calaby <julian.calaby@gmail.com> wrote:
>
>> Hi Rasmus,
>>
>>>
>>> diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
>>> index 47aaccd5e68e..ccd34b0481cd 100644
>>> --- a/drivers/scsi/constants.c
>>> +++ b/drivers/scsi/constants.c
>>> @@ -292,17 +292,31 @@ bool scsi_opcode_sa_name(int opcode, int service_action,
>>>
>>>  struct error_info {
>>>         unsigned short code12;  /* 0x0302 looks better than 0x03,0x02 */
>>> -       const char * text;
>>> +       unsigned short size;
>>>  };
>>>
>>>
>>> +/*
>>> + * There are 700+ entries in this table. To save space, we don't store
>>> + * (code, pointer) pairs, which would make sizeof(struct
>>> + * error_info)==16 on 64 bits. Rather, the second element just stores
>>> + * the size (including \0) of the corresponding string, and we use the
>>> + * sum of these to get the appropriate offset into additional_text
>>> + * defined below. This approach saves 12 bytes per entry.
>>> + */
>>>  static const struct error_info additional[] =
>>>  {
>>> -#define SENSE_CODE(c, s) {c, s},
>>> +#define SENSE_CODE(c, s) {c, sizeof(s)},
>>>  #include "sense_codes.h"
>>>  #undef SENSE_CODE
>>>  };
>>>
>>> +static const char *additional_text =
>>> +#define SENSE_CODE(c, s) s "\0"
>>> +#include "sense_codes.h"
>>> +#undef SENSE_CODE
>>> +       ;
>>> +
>>>  struct error_info2 {
>>>         unsigned char code1, code2_min, code2_max;
>>>         const char * str;
>>> @@ -364,11 +378,14 @@ scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
>>>  {
>>>         int i;
>>>         unsigned short code = ((asc << 8) | ascq);
>>> +       unsigned offset = 0;
>>>
>>>         *fmt = NULL;
>>> -       for (i = 0; additional[i].text; i++)
>>> +       for (i = 0; i < ARRAY_SIZE(additional); i++) {
>>>                 if (additional[i].code12 == code)
>>> -                       return additional[i].text;
>>> +                       return additional_text + offset;
>>> +               offset += additional[i].size;
>>
>> You don't seem to be accounting for the null bytes here.
>
> Well, no, I account for the nul bytes where I define the table (the
> comment actually says as much). sizeof("foo") is 4. Since
> additional_text ends up pointing to a string containing
>
> "foo" "\0" "xyzzy" "\0" "..." "\0"
>
> aka
>
> "foo\0xyzzy\0...\0"
>
> this is the right amount to skip. As I said in the cover letter, I did
> test this (so that I'd at least catch silly off-by-ones), and I do get
> the right strings out.

Ah, that makes sense. It just didn't look right.

Thanks,

-- 
Julian Calaby

Email: julian.calaby@gmail.com
Profile: http://www.google.com/profiles/julian.calaby/

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PATCH 1/2] scsi: move Additional Sense Codes to separate file
  2015-10-06 15:27             ` Rasmus Villemoes
@ 2015-10-17 22:12               ` Rasmus Villemoes
  0 siblings, 0 replies; 15+ messages in thread
From: Rasmus Villemoes @ 2015-10-17 22:12 UTC (permalink / raw)
  To: Bart Van Assche
  Cc: Christoph Hellwig, Hannes Reinecke, James E.J. Bottomley,
	linux-scsi, linux-kernel

On Tue, Oct 06 2015, Rasmus Villemoes <linux@rasmusvillemoes.dk> wrote:

> On Mon, Oct 05 2015, Bart Van Assche <bart.vanassche@sandisk.com> wrote:
>
>> On 10/05/15 02:26, Rasmus Villemoes wrote:
>>> -	{0x041A, "Logical unit not ready, start stop unit command in "
>>> -	 "progress"},
>>> -	{0x041B, "Logical unit not ready, sanitize in progress"},
>>> -	{0x041C, "Logical unit not ready, additional power use not yet "
>>> -	 "granted"},
>>
>> Please convert these multi-line strings into single line string
>> constants such that users can look up these easily with grep.
>
> I can certainly do that, but I'd prefer to do it in a separate patch. I
> really want to keep this as mechanical as possible.
>
>>> +
>>> +SENSE_CODE(0, NULL)
>>
>> The above looks confusing to me. Please leave this out and add { 0,
>> NULL } at the end of the additional[] array instead.
>
> OK, I agree that that would have been cleaner. However, the sentinel
> entry is removed in 2/2 (since we loop using ARRAY_SIZE instead of
> checking for the sentinel). Let me know if you want me to resend the
> 1600 line monster anyway with this addressed.

Should I resend, or can these be picked up as-is? I can easily send a
3/2 making the strings more greppable.

Thanks,
Rasmus

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2015-10-17 22:12 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-09-30 17:30 RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k Rasmus Villemoes
2015-10-03 17:14 ` Christoph Hellwig
2015-10-03 22:09   ` Rasmus Villemoes
2015-10-04  8:02     ` Christoph Hellwig
2015-10-05  9:26       ` [PATCH 0/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k Rasmus Villemoes
2015-10-05  9:26         ` [PATCH 1/2] scsi: move Additional Sense Codes to separate file Rasmus Villemoes
2015-10-05 14:05           ` Bart Van Assche
2015-10-06 15:27             ` Rasmus Villemoes
2015-10-17 22:12               ` Rasmus Villemoes
2015-10-05  9:26         ` [PATCH 2/2] scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8k Rasmus Villemoes
2015-10-05 14:11           ` Bart Van Assche
2015-10-06 15:31             ` Rasmus Villemoes
2015-10-06  1:32     ` RFC: reduce CONFIG_SCSI_CONSTANTS impact by 4k Julian Calaby
2015-10-06 15:39       ` Rasmus Villemoes
2015-10-06 23:01         ` Julian Calaby

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).