* [PATCH 0/2] clk: bcm63xx-gate: add BCM6318 support
@ 2020-06-09 11:30 Álvaro Fernández Rojas
2020-06-09 11:30 ` [PATCH 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings Álvaro Fernández Rojas
` (2 more replies)
0 siblings, 3 replies; 14+ messages in thread
From: Álvaro Fernández Rojas @ 2020-06-09 11:30 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, f.fainelli, bcm-kernel-feedback-list,
julia.lawall, f4bug, jonas.gorski, lkp, linux-clk, devicetree,
linux-arm-kernel, linux-kernel
Cc: Álvaro Fernández Rojas
Add support for the gated clock controllers found on the BCM6318.
Álvaro Fernández Rojas (2):
dt-bindings: clock: bcm63xx: add 6318 gated clock bindings
clk: bcm63xx-gate: add BCM6318 support
.../bindings/clock/brcm,bcm63xx-clocks.txt | 2 +
drivers/clk/bcm/clk-bcm63xx-gate.c | 44 +++++++++++++++++++
2 files changed, 46 insertions(+)
--
2.26.2
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings 2020-06-09 11:30 [PATCH 0/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas @ 2020-06-09 11:30 ` Álvaro Fernández Rojas 2020-06-10 2:23 ` Florian Fainelli 2020-06-09 11:30 ` [PATCH 2/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas 2020-06-10 14:08 ` [PATCH v2 0/2] " Álvaro Fernández Rojas 2 siblings, 1 reply; 14+ messages in thread From: Álvaro Fernández Rojas @ 2020-06-09 11:30 UTC (permalink / raw) To: mturquette, sboyd, robh+dt, f.fainelli, bcm-kernel-feedback-list, julia.lawall, f4bug, jonas.gorski, lkp, linux-clk, devicetree, linux-arm-kernel, linux-kernel Cc: Álvaro Fernández Rojas Add BCM6318 to the binding documentation for the gated clock controllers found on BCM63xx SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> --- Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt index 3041657e2f96..3e7ca5530775 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt @@ -3,6 +3,8 @@ Gated Clock Controller Bindings for MIPS based BCM63XX SoCs Required properties: - compatible: must be one of: "brcm,bcm3368-clocks" + "brcm,bcm6318-clocks" + "brcm,bcm6318-ubus-clocks" "brcm,bcm6328-clocks" "brcm,bcm6358-clocks" "brcm,bcm6362-clocks" -- 2.26.2 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings 2020-06-09 11:30 ` [PATCH 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings Álvaro Fernández Rojas @ 2020-06-10 2:23 ` Florian Fainelli 0 siblings, 0 replies; 14+ messages in thread From: Florian Fainelli @ 2020-06-10 2:23 UTC (permalink / raw) To: Álvaro Fernández Rojas, mturquette, sboyd, robh+dt, f.fainelli, bcm-kernel-feedback-list, julia.lawall, f4bug, jonas.gorski, lkp, linux-clk, devicetree, linux-arm-kernel, linux-kernel On 6/9/2020 4:30 AM, Álvaro Fernández Rojas wrote: > Add BCM6318 to the binding documentation for the gated clock controllers found > on BCM63xx SoCs. > > Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -- Florian ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/2] clk: bcm63xx-gate: add BCM6318 support 2020-06-09 11:30 [PATCH 0/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas 2020-06-09 11:30 ` [PATCH 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings Álvaro Fernández Rojas @ 2020-06-09 11:30 ` Álvaro Fernández Rojas 2020-06-10 2:27 ` Florian Fainelli 2020-06-10 14:08 ` [PATCH v2 0/2] " Álvaro Fernández Rojas 2 siblings, 1 reply; 14+ messages in thread From: Álvaro Fernández Rojas @ 2020-06-09 11:30 UTC (permalink / raw) To: mturquette, sboyd, robh+dt, f.fainelli, bcm-kernel-feedback-list, julia.lawall, f4bug, jonas.gorski, lkp, linux-clk, devicetree, linux-arm-kernel, linux-kernel Cc: Álvaro Fernández Rojas Add support for the gated clock controllers found on the BCM6318. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> --- drivers/clk/bcm/clk-bcm63xx-gate.c | 44 ++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/drivers/clk/bcm/clk-bcm63xx-gate.c b/drivers/clk/bcm/clk-bcm63xx-gate.c index 98e884957db8..12394c091d13 100644 --- a/drivers/clk/bcm/clk-bcm63xx-gate.c +++ b/drivers/clk/bcm/clk-bcm63xx-gate.c @@ -40,6 +40,48 @@ static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { { }, }; +static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = { + { .name = "adsl_asb", .bit = 0, }, + { .name = "usb_asb", .bit = 1, }, + { .name = "mips_asb", .bit = 2, }, + { .name = "pcie_asb", .bit = 3, }, + { .name = "phymips_asb", .bit = 4, }, + { .name = "robosw_asb", .bit = 5, }, + { .name = "sar_asb", .bit = 6, }, + { .name = "sdr_asb", .bit = 7, }, + { .name = "swreg_asb", .bit = 8, }, + { .name = "periph_asb", .bit = 9, }, + { .name = "cpubus160", .bit = 10, }, + { .name = "adsl", .bit = 11, }, + { .name = "sar124", .bit = 12, }, + { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, }, + { .name = "pcie", .bit = 14, }, + { .name = "robosw250", .bit = 16, }, + { .name = "robosw025", .bit = 17, }, + { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, }, + { .name = "usb", .bit = 20, }, + { .name = "hsspi", .bit = 25, }, + { .name = "pcie25", .bit = 27, }, + { .name = "phymips", .bit = 28, }, + { .name = "afe", .bit = 29, }, + { .name = "qproc", .bit = 30, }, + { }, +}; + +static const struct clk_bcm63xx_table_entry bcm6318_ubus_clocks[] = { + { .name = "adsl-ubus", .bit = 0, }, + { .name = "arb-ubus", .bit = 1, .flags = CLK_IS_CRITICAL, }, + { .name = "mips-ubus", .bit = 2, .flags = CLK_IS_CRITICAL, }, + { .name = "pcie-ubus", .bit = 3, }, + { .name = "periph-ubus", .bit = 4, .flags = CLK_IS_CRITICAL, }, + { .name = "phymips-ubus", .bit = 5, }, + { .name = "robosw-ubus", .bit = 6, }, + { .name = "sar-ubus", .bit = 7, }, + { .name = "sdr-ubus", .bit = 8, }, + { .name = "usb-ubus", .bit = 9, }, + { }, +}; + static const struct clk_bcm63xx_table_entry bcm6328_clocks[] = { { .name = "phy_mips", .bit = 0, }, { .name = "adsl_qproc", .bit = 1, }, @@ -217,6 +259,8 @@ static int clk_bcm63xx_remove(struct platform_device *pdev) static const struct of_device_id clk_bcm63xx_dt_ids[] = { { .compatible = "brcm,bcm3368-clocks", .data = &bcm3368_clocks, }, + { .compatible = "brcm,bcm6318-clocks", .data = &bcm6318_clocks, }, + { .compatible = "brcm,bcm6318-ubus-clocks", .data = &bcm6318_ubus_clocks, }, { .compatible = "brcm,bcm6328-clocks", .data = &bcm6328_clocks, }, { .compatible = "brcm,bcm6358-clocks", .data = &bcm6358_clocks, }, { .compatible = "brcm,bcm6362-clocks", .data = &bcm6362_clocks, }, -- 2.26.2 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] clk: bcm63xx-gate: add BCM6318 support 2020-06-09 11:30 ` [PATCH 2/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas @ 2020-06-10 2:27 ` Florian Fainelli 2020-06-10 6:12 ` Álvaro Fernández Rojas 0 siblings, 1 reply; 14+ messages in thread From: Florian Fainelli @ 2020-06-10 2:27 UTC (permalink / raw) To: Álvaro Fernández Rojas, mturquette, sboyd, robh+dt, f.fainelli, bcm-kernel-feedback-list, julia.lawall, f4bug, jonas.gorski, lkp, linux-clk, devicetree, linux-arm-kernel, linux-kernel On 6/9/2020 4:30 AM, Álvaro Fernández Rojas wrote: > +static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = { > + { .name = "adsl_asb", .bit = 0, }, > + { .name = "usb_asb", .bit = 1, }, > + { .name = "mips_asb", .bit = 2, }, > + { .name = "pcie_asb", .bit = 3, }, > + { .name = "phymips_asb", .bit = 4, }, > + { .name = "robosw_asb", .bit = 5, }, > + { .name = "sar_asb", .bit = 6, }, > + { .name = "sdr_asb", .bit = 7, }, > + { .name = "swreg_asb", .bit = 8, }, > + { .name = "periph_asb", .bit = 9, }, > + { .name = "cpubus160", .bit = 10, }, > + { .name = "adsl", .bit = 11, }, > + { .name = "sar124", .bit = 12, }, Nit: this should be sar125 > + { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, }, > + { .name = "pcie", .bit = 14, }, > + { .name = "robosw250", .bit = 16, }, > + { .name = "robosw025", .bit = 17, }, > + { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, }, > + { .name = "usb", .bit = 20, }, This should probably be "usbd" to indicate this is the USB device clock (not host) With that fixed: Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -- Florian ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] clk: bcm63xx-gate: add BCM6318 support 2020-06-10 2:27 ` Florian Fainelli @ 2020-06-10 6:12 ` Álvaro Fernández Rojas 2020-06-10 8:29 ` Philippe Mathieu-Daudé 0 siblings, 1 reply; 14+ messages in thread From: Álvaro Fernández Rojas @ 2020-06-10 6:12 UTC (permalink / raw) To: Florian Fainelli Cc: mturquette, sboyd, robh+dt, bcm-kernel-feedback-list, julia.lawall, f4bug, jonas.gorski, lkp, linux-clk, devicetree, linux-arm-kernel, linux-kernel Hi Florian, > El 10 jun 2020, a las 4:27, Florian Fainelli <f.fainelli@gmail.com> escribió: > > > > On 6/9/2020 4:30 AM, Álvaro Fernández Rojas wrote: >> +static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = { >> + { .name = "adsl_asb", .bit = 0, }, >> + { .name = "usb_asb", .bit = 1, }, >> + { .name = "mips_asb", .bit = 2, }, >> + { .name = "pcie_asb", .bit = 3, }, >> + { .name = "phymips_asb", .bit = 4, }, >> + { .name = "robosw_asb", .bit = 5, }, >> + { .name = "sar_asb", .bit = 6, }, >> + { .name = "sdr_asb", .bit = 7, }, >> + { .name = "swreg_asb", .bit = 8, }, >> + { .name = "periph_asb", .bit = 9, }, >> + { .name = "cpubus160", .bit = 10, }, >> + { .name = "adsl", .bit = 11, }, >> + { .name = "sar124", .bit = 12, }, > > Nit: this should be sar125 Nice catch, I will fix this in v2. > >> + { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, }, >> + { .name = "pcie", .bit = 14, }, >> + { .name = "robosw250", .bit = 16, }, >> + { .name = "robosw025", .bit = 17, }, >> + { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, }, >> + { .name = "usb", .bit = 20, }, > > This should probably be "usbd" to indicate this is the USB device clock > (not host) Ok, I will change it. I got confused by the fact that both (usbd and usbh) were present on 6318_map_part.h: #define USBD_CLK_EN (1 << 20) #define USBH_CLK_EN (1 << 20) > > With that fixed: > > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > -- > Florian ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] clk: bcm63xx-gate: add BCM6318 support 2020-06-10 6:12 ` Álvaro Fernández Rojas @ 2020-06-10 8:29 ` Philippe Mathieu-Daudé 2020-06-10 15:14 ` Florian Fainelli 0 siblings, 1 reply; 14+ messages in thread From: Philippe Mathieu-Daudé @ 2020-06-10 8:29 UTC (permalink / raw) To: Álvaro Fernández Rojas Cc: Florian Fainelli, Michael Turquette, Stephen Boyd, Rob Herring, bcm-kernel-feedback-list, Julia Lawall, Jonas Gorski, kbuild test robot, linux-clk, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Linux ARM, open list Hi, On Wed, Jun 10, 2020 at 8:13 AM Álvaro Fernández Rojas <noltari@gmail.com> wrote: > > Hi Florian, > > > El 10 jun 2020, a las 4:27, Florian Fainelli <f.fainelli@gmail.com> escribió: > > > > > > > > On 6/9/2020 4:30 AM, Álvaro Fernández Rojas wrote: > >> +static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = { > >> + { .name = "adsl_asb", .bit = 0, }, > >> + { .name = "usb_asb", .bit = 1, }, > >> + { .name = "mips_asb", .bit = 2, }, > >> + { .name = "pcie_asb", .bit = 3, }, > >> + { .name = "phymips_asb", .bit = 4, }, > >> + { .name = "robosw_asb", .bit = 5, }, > >> + { .name = "sar_asb", .bit = 6, }, > >> + { .name = "sdr_asb", .bit = 7, }, > >> + { .name = "swreg_asb", .bit = 8, }, > >> + { .name = "periph_asb", .bit = 9, }, > >> + { .name = "cpubus160", .bit = 10, }, > >> + { .name = "adsl", .bit = 11, }, > >> + { .name = "sar124", .bit = 12, }, > > > > Nit: this should be sar125 > > Nice catch, I will fix this in v2. > > > > >> + { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, }, > >> + { .name = "pcie", .bit = 14, }, > >> + { .name = "robosw250", .bit = 16, }, > >> + { .name = "robosw025", .bit = 17, }, > >> + { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, }, > >> + { .name = "usb", .bit = 20, }, > > > > This should probably be "usbd" to indicate this is the USB device clock > > (not host) > > Ok, I will change it. I got confused by the fact that both (usbd and usbh) were present on 6318_map_part.h: > #define USBD_CLK_EN (1 << 20) > #define USBH_CLK_EN (1 << 20) Is there a datasheet to verify that? > > > > > With that fixed: > > > > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > > -- > > Florian > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] clk: bcm63xx-gate: add BCM6318 support 2020-06-10 8:29 ` Philippe Mathieu-Daudé @ 2020-06-10 15:14 ` Florian Fainelli 2020-06-13 17:53 ` Philippe Mathieu-Daudé 0 siblings, 1 reply; 14+ messages in thread From: Florian Fainelli @ 2020-06-10 15:14 UTC (permalink / raw) To: Philippe Mathieu-Daudé, Álvaro Fernández Rojas Cc: Michael Turquette, Stephen Boyd, Rob Herring, bcm-kernel-feedback-list, Julia Lawall, Jonas Gorski, kbuild test robot, linux-clk, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Linux ARM, open list On 6/10/2020 1:29 AM, Philippe Mathieu-Daudé wrote: > Hi, > > On Wed, Jun 10, 2020 at 8:13 AM Álvaro Fernández Rojas > <noltari@gmail.com> wrote: >> >> Hi Florian, >> >>> El 10 jun 2020, a las 4:27, Florian Fainelli <f.fainelli@gmail.com> escribió: >>> >>> >>> >>> On 6/9/2020 4:30 AM, Álvaro Fernández Rojas wrote: >>>> +static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = { >>>> + { .name = "adsl_asb", .bit = 0, }, >>>> + { .name = "usb_asb", .bit = 1, }, >>>> + { .name = "mips_asb", .bit = 2, }, >>>> + { .name = "pcie_asb", .bit = 3, }, >>>> + { .name = "phymips_asb", .bit = 4, }, >>>> + { .name = "robosw_asb", .bit = 5, }, >>>> + { .name = "sar_asb", .bit = 6, }, >>>> + { .name = "sdr_asb", .bit = 7, }, >>>> + { .name = "swreg_asb", .bit = 8, }, >>>> + { .name = "periph_asb", .bit = 9, }, >>>> + { .name = "cpubus160", .bit = 10, }, >>>> + { .name = "adsl", .bit = 11, }, >>>> + { .name = "sar124", .bit = 12, }, >>> >>> Nit: this should be sar125 >> >> Nice catch, I will fix this in v2. >> >>> >>>> + { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, }, >>>> + { .name = "pcie", .bit = 14, }, >>>> + { .name = "robosw250", .bit = 16, }, >>>> + { .name = "robosw025", .bit = 17, }, >>>> + { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, }, >>>> + { .name = "usb", .bit = 20, }, >>> >>> This should probably be "usbd" to indicate this is the USB device clock >>> (not host) >> >> Ok, I will change it. I got confused by the fact that both (usbd and usbh) were present on 6318_map_part.h: >> #define USBD_CLK_EN (1 << 20) >> #define USBH_CLK_EN (1 << 20) > > Is there a datasheet to verify that? Not a public one, but I can confirm this is correct given the internal datasheet. -- Florian ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] clk: bcm63xx-gate: add BCM6318 support 2020-06-10 15:14 ` Florian Fainelli @ 2020-06-13 17:53 ` Philippe Mathieu-Daudé 0 siblings, 0 replies; 14+ messages in thread From: Philippe Mathieu-Daudé @ 2020-06-13 17:53 UTC (permalink / raw) To: Florian Fainelli Cc: Álvaro Fernández Rojas, Michael Turquette, Stephen Boyd, Rob Herring, bcm-kernel-feedback-list, Julia Lawall, Jonas Gorski, kbuild test robot, linux-clk, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Linux ARM, open list On Wed, Jun 10, 2020 at 5:32 PM Florian Fainelli <f.fainelli@gmail.com> wrote: > On 6/10/2020 1:29 AM, Philippe Mathieu-Daudé wrote: > > Hi, > > > > On Wed, Jun 10, 2020 at 8:13 AM Álvaro Fernández Rojas > > <noltari@gmail.com> wrote: > >> > >> Hi Florian, > >> > >>> El 10 jun 2020, a las 4:27, Florian Fainelli <f.fainelli@gmail.com> escribió: > >>> > >>> > >>> > >>> On 6/9/2020 4:30 AM, Álvaro Fernández Rojas wrote: > >>>> +static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = { > >>>> + { .name = "adsl_asb", .bit = 0, }, > >>>> + { .name = "usb_asb", .bit = 1, }, > >>>> + { .name = "mips_asb", .bit = 2, }, > >>>> + { .name = "pcie_asb", .bit = 3, }, > >>>> + { .name = "phymips_asb", .bit = 4, }, > >>>> + { .name = "robosw_asb", .bit = 5, }, > >>>> + { .name = "sar_asb", .bit = 6, }, > >>>> + { .name = "sdr_asb", .bit = 7, }, > >>>> + { .name = "swreg_asb", .bit = 8, }, > >>>> + { .name = "periph_asb", .bit = 9, }, > >>>> + { .name = "cpubus160", .bit = 10, }, > >>>> + { .name = "adsl", .bit = 11, }, > >>>> + { .name = "sar124", .bit = 12, }, > >>> > >>> Nit: this should be sar125 > >> > >> Nice catch, I will fix this in v2. > >> > >>> > >>>> + { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, }, > >>>> + { .name = "pcie", .bit = 14, }, > >>>> + { .name = "robosw250", .bit = 16, }, > >>>> + { .name = "robosw025", .bit = 17, }, > >>>> + { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, }, > >>>> + { .name = "usb", .bit = 20, }, > >>> > >>> This should probably be "usbd" to indicate this is the USB device clock > >>> (not host) > >> > >> Ok, I will change it. I got confused by the fact that both (usbd and usbh) were present on 6318_map_part.h: > >> #define USBD_CLK_EN (1 << 20) > >> #define USBH_CLK_EN (1 << 20) > > > > Is there a datasheet to verify that? > > Not a public one, but I can confirm this is correct given the internal > datasheet. OK thank you Florian. > -- > Florian ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 0/2] clk: bcm63xx-gate: add BCM6318 support 2020-06-09 11:30 [PATCH 0/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas 2020-06-09 11:30 ` [PATCH 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings Álvaro Fernández Rojas 2020-06-09 11:30 ` [PATCH 2/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas @ 2020-06-10 14:08 ` Álvaro Fernández Rojas 2020-06-10 14:08 ` [PATCH v2 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings Álvaro Fernández Rojas ` (2 more replies) 2 siblings, 3 replies; 14+ messages in thread From: Álvaro Fernández Rojas @ 2020-06-10 14:08 UTC (permalink / raw) To: mturquette, sboyd, robh+dt, f.fainelli, bcm-kernel-feedback-list, julia.lawall, f4bug, jonas.gorski, lkp, linux-clk, devicetree, linux-arm-kernel, linux-kernel Cc: Álvaro Fernández Rojas Add support for the gated clock controllers found on the BCM6318. Álvaro Fernández Rojas (2): dt-bindings: clock: bcm63xx: add 6318 gated clock bindings clk: bcm63xx-gate: add BCM6318 support .../bindings/clock/brcm,bcm63xx-clocks.txt | 2 + drivers/clk/bcm/clk-bcm63xx-gate.c | 44 +++++++++++++++++++ 2 files changed, 46 insertions(+) -- 2.26.2 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings 2020-06-10 14:08 ` [PATCH v2 0/2] " Álvaro Fernández Rojas @ 2020-06-10 14:08 ` Álvaro Fernández Rojas 2020-06-17 22:23 ` Rob Herring 2020-06-10 14:08 ` [PATCH v2 2/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas 2020-06-20 0:00 ` [PATCH v2 0/2] " Stephen Boyd 2 siblings, 1 reply; 14+ messages in thread From: Álvaro Fernández Rojas @ 2020-06-10 14:08 UTC (permalink / raw) To: mturquette, sboyd, robh+dt, f.fainelli, bcm-kernel-feedback-list, julia.lawall, f4bug, jonas.gorski, lkp, linux-clk, devicetree, linux-arm-kernel, linux-kernel Cc: Álvaro Fernández Rojas Add BCM6318 to the binding documentation for the gated clock controllers found on BCM63xx SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> --- v2: no changes. Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt index 3041657e2f96..3e7ca5530775 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt @@ -3,6 +3,8 @@ Gated Clock Controller Bindings for MIPS based BCM63XX SoCs Required properties: - compatible: must be one of: "brcm,bcm3368-clocks" + "brcm,bcm6318-clocks" + "brcm,bcm6318-ubus-clocks" "brcm,bcm6328-clocks" "brcm,bcm6358-clocks" "brcm,bcm6362-clocks" -- 2.26.2 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings 2020-06-10 14:08 ` [PATCH v2 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings Álvaro Fernández Rojas @ 2020-06-17 22:23 ` Rob Herring 0 siblings, 0 replies; 14+ messages in thread From: Rob Herring @ 2020-06-17 22:23 UTC (permalink / raw) To: Álvaro Fernández Rojas Cc: lkp, bcm-kernel-feedback-list, linux-clk, mturquette, linux-kernel, robh+dt, devicetree, julia.lawall, sboyd, f.fainelli, linux-arm-kernel, f4bug, jonas.gorski On Wed, 10 Jun 2020 16:08:57 +0200, Álvaro Fernández Rojas wrote: > Add BCM6318 to the binding documentation for the gated clock controllers found > on BCM63xx SoCs. > > Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > --- > v2: no changes. > > Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt | 2 ++ > 1 file changed, 2 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 2/2] clk: bcm63xx-gate: add BCM6318 support 2020-06-10 14:08 ` [PATCH v2 0/2] " Álvaro Fernández Rojas 2020-06-10 14:08 ` [PATCH v2 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings Álvaro Fernández Rojas @ 2020-06-10 14:08 ` Álvaro Fernández Rojas 2020-06-20 0:00 ` [PATCH v2 0/2] " Stephen Boyd 2 siblings, 0 replies; 14+ messages in thread From: Álvaro Fernández Rojas @ 2020-06-10 14:08 UTC (permalink / raw) To: mturquette, sboyd, robh+dt, f.fainelli, bcm-kernel-feedback-list, julia.lawall, f4bug, jonas.gorski, lkp, linux-clk, devicetree, linux-arm-kernel, linux-kernel Cc: Álvaro Fernández Rojas Add support for the gated clock controllers found on the BCM6318. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> --- v2: correct names for sar125 and usbd drivers/clk/bcm/clk-bcm63xx-gate.c | 44 ++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/drivers/clk/bcm/clk-bcm63xx-gate.c b/drivers/clk/bcm/clk-bcm63xx-gate.c index 98e884957db8..fce6746cc607 100644 --- a/drivers/clk/bcm/clk-bcm63xx-gate.c +++ b/drivers/clk/bcm/clk-bcm63xx-gate.c @@ -40,6 +40,48 @@ static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { { }, }; +static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = { + { .name = "adsl_asb", .bit = 0, }, + { .name = "usb_asb", .bit = 1, }, + { .name = "mips_asb", .bit = 2, }, + { .name = "pcie_asb", .bit = 3, }, + { .name = "phymips_asb", .bit = 4, }, + { .name = "robosw_asb", .bit = 5, }, + { .name = "sar_asb", .bit = 6, }, + { .name = "sdr_asb", .bit = 7, }, + { .name = "swreg_asb", .bit = 8, }, + { .name = "periph_asb", .bit = 9, }, + { .name = "cpubus160", .bit = 10, }, + { .name = "adsl", .bit = 11, }, + { .name = "sar125", .bit = 12, }, + { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, }, + { .name = "pcie", .bit = 14, }, + { .name = "robosw250", .bit = 16, }, + { .name = "robosw025", .bit = 17, }, + { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, }, + { .name = "usbd", .bit = 20, }, + { .name = "hsspi", .bit = 25, }, + { .name = "pcie25", .bit = 27, }, + { .name = "phymips", .bit = 28, }, + { .name = "afe", .bit = 29, }, + { .name = "qproc", .bit = 30, }, + { }, +}; + +static const struct clk_bcm63xx_table_entry bcm6318_ubus_clocks[] = { + { .name = "adsl-ubus", .bit = 0, }, + { .name = "arb-ubus", .bit = 1, .flags = CLK_IS_CRITICAL, }, + { .name = "mips-ubus", .bit = 2, .flags = CLK_IS_CRITICAL, }, + { .name = "pcie-ubus", .bit = 3, }, + { .name = "periph-ubus", .bit = 4, .flags = CLK_IS_CRITICAL, }, + { .name = "phymips-ubus", .bit = 5, }, + { .name = "robosw-ubus", .bit = 6, }, + { .name = "sar-ubus", .bit = 7, }, + { .name = "sdr-ubus", .bit = 8, }, + { .name = "usb-ubus", .bit = 9, }, + { }, +}; + static const struct clk_bcm63xx_table_entry bcm6328_clocks[] = { { .name = "phy_mips", .bit = 0, }, { .name = "adsl_qproc", .bit = 1, }, @@ -217,6 +259,8 @@ static int clk_bcm63xx_remove(struct platform_device *pdev) static const struct of_device_id clk_bcm63xx_dt_ids[] = { { .compatible = "brcm,bcm3368-clocks", .data = &bcm3368_clocks, }, + { .compatible = "brcm,bcm6318-clocks", .data = &bcm6318_clocks, }, + { .compatible = "brcm,bcm6318-ubus-clocks", .data = &bcm6318_ubus_clocks, }, { .compatible = "brcm,bcm6328-clocks", .data = &bcm6328_clocks, }, { .compatible = "brcm,bcm6358-clocks", .data = &bcm6358_clocks, }, { .compatible = "brcm,bcm6362-clocks", .data = &bcm6362_clocks, }, -- 2.26.2 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v2 0/2] clk: bcm63xx-gate: add BCM6318 support 2020-06-10 14:08 ` [PATCH v2 0/2] " Álvaro Fernández Rojas 2020-06-10 14:08 ` [PATCH v2 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings Álvaro Fernández Rojas 2020-06-10 14:08 ` [PATCH v2 2/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas @ 2020-06-20 0:00 ` Stephen Boyd 2 siblings, 0 replies; 14+ messages in thread From: Stephen Boyd @ 2020-06-20 0:00 UTC (permalink / raw) To: noltari Cc: bcm-kernel-feedback-list, devicetree, f.fainelli, f4bug, jonas.gorski, julia.lawall, linux-arm-kernel, linux-clk, linux-kernel, lkp, mturquette, robh+dt > Add support for the gated clock controllers found on the BCM6318. > > Álvaro Fernández Rojas (2): > dt-bindings: clock: bcm63xx: add 6318 gated clock bindings > clk: bcm63xx-gate: add BCM6318 support > > .../bindings/clock/brcm,bcm63xx-clocks.txt | 2 + > drivers/clk/bcm/clk-bcm63xx-gate.c | 44 +++++++++++++++++++ > 2 files changed, 46 insertions(+) > Sorry please don't send these in reply to the original patch series. I have a hard time finding new patch series in my 'thread summary' view. ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2020-06-20 0:00 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-06-09 11:30 [PATCH 0/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas 2020-06-09 11:30 ` [PATCH 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings Álvaro Fernández Rojas 2020-06-10 2:23 ` Florian Fainelli 2020-06-09 11:30 ` [PATCH 2/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas 2020-06-10 2:27 ` Florian Fainelli 2020-06-10 6:12 ` Álvaro Fernández Rojas 2020-06-10 8:29 ` Philippe Mathieu-Daudé 2020-06-10 15:14 ` Florian Fainelli 2020-06-13 17:53 ` Philippe Mathieu-Daudé 2020-06-10 14:08 ` [PATCH v2 0/2] " Álvaro Fernández Rojas 2020-06-10 14:08 ` [PATCH v2 1/2] dt-bindings: clock: bcm63xx: add 6318 gated clock bindings Álvaro Fernández Rojas 2020-06-17 22:23 ` Rob Herring 2020-06-10 14:08 ` [PATCH v2 2/2] clk: bcm63xx-gate: add BCM6318 support Álvaro Fernández Rojas 2020-06-20 0:00 ` [PATCH v2 0/2] " Stephen Boyd
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).