* [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file
2016-12-09 1:04 [PATCH v3 0/3] ARM: dts: imx6: Support Poslab Savageboard dual & quad Milo Kim
@ 2016-12-09 1:04 ` Milo Kim
2016-12-26 16:26 ` Fabio Estevam
2017-01-02 6:52 ` Shawn Guo
2016-12-09 1:04 ` [PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual Milo Kim
2016-12-09 1:04 ` [PATCH v3 3/3] ARM: dts: imx6: Support Savageboard quad Milo Kim
2 siblings, 2 replies; 14+ messages in thread
From: Milo Kim @ 2016-12-09 1:04 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer
Cc: Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel, Milo Kim
* Memory
memblock for DDR3 1GB
* Regulator
3.3V for panel and backlight.
* Display
Enable HDMI and LVDS panel. Savageboard supports AVIC TM097TDH02 panel
which is compatible with Hannstar HSD100PXN1, so reuse it.
* Clock
The commit d28be499c45e6 is applied to support LVDS and HDMI output
simultaneously.
* Pinmux
eMMC, ethernet, HDMI, I2C, power button, PWM, SD card and UART.
* Others
Enable ethernet, UART1 debug, USB host, USDHC3 for microSD card and
USDHC4 for built-in eMMC storage.
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
arch/arm/boot/dts/imx6qdl-savageboard.dtsi | 262 +++++++++++++++++++++++++++++
1 file changed, 262 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qdl-savageboard.dtsi
diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
new file mode 100644
index 0000000..a7a7e1d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+
+ backlight: panel_bl {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <4>;
+ power-supply = <®_3p3v>;
+ pwms = <&pwm1 0 10000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ panel {
+ compatible = "avic, tm097tdh02", "hannstar,hsd100pxn1";
+ backlight = <&backlight>;
+ power-supply = <®_3p3v>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_tx_cec>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ reg = <0>;
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+/* SD card */
+&usdhc3 {
+ bus-width = <4>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd>;
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc4 {
+ bus-width = <8>;
+ keep-power-in-suspend;
+ no-1-8-v;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_emmc: emmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ /* PHY reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+ >;
+ };
+
+ pinctrl_hdmi_tx_cec: hdmitxcecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_sd: sdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ /* CD pin */
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+};
--
2.9.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file
2016-12-09 1:04 ` [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file Milo Kim
@ 2016-12-26 16:26 ` Fabio Estevam
2017-01-02 6:52 ` Shawn Guo
1 sibling, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2016-12-26 16:26 UTC (permalink / raw)
To: Milo Kim
Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, devicetree, linux-kernel,
linux-arm-kernel
On Thu, Dec 8, 2016 at 11:04 PM, Milo Kim <woogyom.kim@gmail.com> wrote:
> * Memory
> memblock for DDR3 1GB
>
> * Regulator
> 3.3V for panel and backlight.
>
> * Display
> Enable HDMI and LVDS panel. Savageboard supports AVIC TM097TDH02 panel
> which is compatible with Hannstar HSD100PXN1, so reuse it.
>
> * Clock
> The commit d28be499c45e6 is applied to support LVDS and HDMI output
> simultaneously.
>
> * Pinmux
> eMMC, ethernet, HDMI, I2C, power button, PWM, SD card and UART.
>
> * Others
> Enable ethernet, UART1 debug, USB host, USDHC3 for microSD card and
> USDHC4 for built-in eMMC storage.
>
> Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file
2016-12-09 1:04 ` [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file Milo Kim
2016-12-26 16:26 ` Fabio Estevam
@ 2017-01-02 6:52 ` Shawn Guo
2017-01-02 7:31 ` Milo Kim
1 sibling, 1 reply; 14+ messages in thread
From: Shawn Guo @ 2017-01-02 6:52 UTC (permalink / raw)
To: Milo Kim
Cc: Sascha Hauer, Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel
On Fri, Dec 09, 2016 at 10:04:34AM +0900, Milo Kim wrote:
> * Memory
> memblock for DDR3 1GB
>
> * Regulator
> 3.3V for panel and backlight.
>
> * Display
> Enable HDMI and LVDS panel. Savageboard supports AVIC TM097TDH02 panel
> which is compatible with Hannstar HSD100PXN1, so reuse it.
>
> * Clock
> The commit d28be499c45e6 is applied to support LVDS and HDMI output
> simultaneously.
>
> * Pinmux
> eMMC, ethernet, HDMI, I2C, power button, PWM, SD card and UART.
>
> * Others
> Enable ethernet, UART1 debug, USB host, USDHC3 for microSD card and
> USDHC4 for built-in eMMC storage.
>
> Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
> ---
> arch/arm/boot/dts/imx6qdl-savageboard.dtsi | 262 +++++++++++++++++++++++++++++
> 1 file changed, 262 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6qdl-savageboard.dtsi
>
> diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
> new file mode 100644
> index 0000000..a7a7e1d
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
> @@ -0,0 +1,262 @@
> +/*
> + * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
The copyright text needs to be corrected as below.
https://patchwork.kernel.org/patch/9475057/
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> + chosen {
> + stdout-path = &uart1;
> + };
> +
> + memory@10000000 {
> + device_type = "memory";
> + reg = <0x10000000 0x40000000>;
> + };
> +
> + backlight: panel_bl {
The node name should be as generic as possible, while label name can be
specific. That said, the following one should be better.
panel_bl: backlight
> + compatible = "pwm-backlight";
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <4>;
> + power-supply = <®_3p3v>;
> + pwms = <&pwm1 0 10000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_keys>;
> +
> + power {
> + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
> + label = "Power Button";
> + linux,code = <KEY_POWER>;
> + wakeup-source;
> + };
> + };
> +
> + panel {
> + compatible = "avic, tm097tdh02", "hannstar,hsd100pxn1";
"avic, tm097tdh02" is an undocumented compatible.
> + backlight = <&backlight>;
> + power-supply = <®_3p3v>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> + };
> +
> + reg_3p3v: regulator-3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +};
> +
> +&clks {
> + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
> + <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
> + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
> + <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
> +};
> +
> +&fec {
> + phy-mode = "rgmii";
> + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + status = "okay";
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&i2c2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hdmi_tx_cec>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +};
> +
> +&ldb {
> + status = "okay";
> +
> + lvds-channel@0 {
> + reg = <0>;
> + status = "okay";
> +
> + port@4 {
> + reg = <4>;
> +
> + lvds0_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> +&pwm1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm1>;
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&usbh1 {
> + status = "okay";
> +};
> +
> +/* SD card */
> +&usdhc3 {
> + bus-width = <4>;
> + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
> + no-1-8-v;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sd>;
> + status = "okay";
> +};
> +
> +/* eMMC */
> +&usdhc4 {
> + bus-width = <8>;
> + keep-power-in-suspend;
> + no-1-8-v;
> + non-removable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_emmc>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl_emmc: emmcgrp {
> + fsl,pins = <
> + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
> + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
> + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
> + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
> + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
> + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
> + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
> + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
> + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
> + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
> + /* PHY reset */
> + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
> + >;
> + };
> +
> + pinctrl_hdmi_tx_cec: hdmitxcecgrp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_gpio_keys: gpiokeysgrp {
> + fsl,pins = <
> + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1
> + >;
> + };
The pinctrl entries are well sorted alphabetically except this one.
Shawn
> +
> + pinctrl_pwm1: pwm1grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
> + >;
> + };
> +
> + pinctrl_sd: sdgrp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
> + /* CD pin */
> + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
> + >;
> + };
> +};
> --
> 2.9.3
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file
2017-01-02 6:52 ` Shawn Guo
@ 2017-01-02 7:31 ` Milo Kim
2017-01-02 7:41 ` Shawn Guo
2017-01-02 7:44 ` Shawn Guo
0 siblings, 2 replies; 14+ messages in thread
From: Milo Kim @ 2017-01-02 7:31 UTC (permalink / raw)
To: Shawn Guo
Cc: Sascha Hauer, Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel
On 01/02/2017 03:52 PM, Shawn Guo wrote:
>> + panel {
>> + compatible = "avic, tm097tdh02", "hannstar,hsd100pxn1";
> "avic, tm097tdh02" is an undocumented compatible.
>
AVIC TM097TDH02 panel is compatible with Hannstar HSD100PXN1, so I reuse
it. It's the same rule as the usage of imx6q I2C controller.
i2c2: i2c@021a4000 {
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
};
Best regards,
Milo
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file
2017-01-02 7:31 ` Milo Kim
@ 2017-01-02 7:41 ` Shawn Guo
2017-01-02 7:45 ` Milo Kim
2017-01-02 7:44 ` Shawn Guo
1 sibling, 1 reply; 14+ messages in thread
From: Shawn Guo @ 2017-01-02 7:41 UTC (permalink / raw)
To: Milo Kim
Cc: Sascha Hauer, Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel
On Mon, Jan 02, 2017 at 04:31:07PM +0900, Milo Kim wrote:
>
> On 01/02/2017 03:52 PM, Shawn Guo wrote:
> >>+ panel {
> >>+ compatible = "avic, tm097tdh02", "hannstar,hsd100pxn1";
> >"avic, tm097tdh02" is an undocumented compatible.
> >
>
> AVIC TM097TDH02 panel is compatible with Hannstar HSD100PXN1, so I
> reuse it. It's the same rule as the usage of imx6q I2C controller.
>
> i2c2: i2c@021a4000 {
> compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
> };
Okay. Drop the space in the middle of the compatible.
Shawn
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file
2017-01-02 7:41 ` Shawn Guo
@ 2017-01-02 7:45 ` Milo Kim
0 siblings, 0 replies; 14+ messages in thread
From: Milo Kim @ 2017-01-02 7:45 UTC (permalink / raw)
To: Shawn Guo
Cc: Sascha Hauer, Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel
On 01/02/2017 04:41 PM, Shawn Guo wrote:
> On Mon, Jan 02, 2017 at 04:31:07PM +0900, Milo Kim wrote:
>>
>> On 01/02/2017 03:52 PM, Shawn Guo wrote:
>>>> + panel {
>>>> + compatible = "avic, tm097tdh02", "hannstar,hsd100pxn1";
>>> "avic, tm097tdh02" is an undocumented compatible.
>>>
>>
>> AVIC TM097TDH02 panel is compatible with Hannstar HSD100PXN1, so I
>> reuse it. It's the same rule as the usage of imx6q I2C controller.
>>
>> i2c2: i2c@021a4000 {
>> compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
>> };
>
> Okay. Drop the space in the middle of the compatible.
Thanks for all your feedback. Please let me submit the v4 later.
Best regards,
Milo
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file
2017-01-02 7:31 ` Milo Kim
2017-01-02 7:41 ` Shawn Guo
@ 2017-01-02 7:44 ` Shawn Guo
2017-01-02 7:49 ` Milo Kim
1 sibling, 1 reply; 14+ messages in thread
From: Shawn Guo @ 2017-01-02 7:44 UTC (permalink / raw)
To: Milo Kim
Cc: Sascha Hauer, Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel
On Mon, Jan 02, 2017 at 04:31:07PM +0900, Milo Kim wrote:
>
> On 01/02/2017 03:52 PM, Shawn Guo wrote:
> >>+ panel {
> >>+ compatible = "avic, tm097tdh02", "hannstar,hsd100pxn1";
> >"avic, tm097tdh02" is an undocumented compatible.
> >
>
> AVIC TM097TDH02 panel is compatible with Hannstar HSD100PXN1, so I
> reuse it. It's the same rule as the usage of imx6q I2C controller.
>
> i2c2: i2c@021a4000 {
> compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
> };
Forgot to ask, is the "avic" Shanghai AVIC Optoelectronics Co., Ltd. as
documented in vendor-prefixes.txt?
Shawn
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file
2017-01-02 7:44 ` Shawn Guo
@ 2017-01-02 7:49 ` Milo Kim
0 siblings, 0 replies; 14+ messages in thread
From: Milo Kim @ 2017-01-02 7:49 UTC (permalink / raw)
To: Shawn Guo
Cc: Sascha Hauer, Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel
On 01/02/2017 04:44 PM, Shawn Guo wrote:
> On Mon, Jan 02, 2017 at 04:31:07PM +0900, Milo Kim wrote:
>>
>> On 01/02/2017 03:52 PM, Shawn Guo wrote:
>>>> + panel {
>>>> + compatible = "avic, tm097tdh02", "hannstar,hsd100pxn1";
>>> "avic, tm097tdh02" is an undocumented compatible.
>>>
>>
>> AVIC TM097TDH02 panel is compatible with Hannstar HSD100PXN1, so I
>> reuse it. It's the same rule as the usage of imx6q I2C controller.
>>
>> i2c2: i2c@021a4000 {
>> compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
>> };
>
> Forgot to ask, is the "avic" Shanghai AVIC Optoelectronics Co., Ltd. as
> documented in vendor-prefixes.txt?
Yes, right.
Best regards,
Milo
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual
2016-12-09 1:04 [PATCH v3 0/3] ARM: dts: imx6: Support Poslab Savageboard dual & quad Milo Kim
2016-12-09 1:04 ` [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file Milo Kim
@ 2016-12-09 1:04 ` Milo Kim
2016-12-26 16:27 ` Fabio Estevam
2017-01-02 7:03 ` Shawn Guo
2016-12-09 1:04 ` [PATCH v3 3/3] ARM: dts: imx6: Support Savageboard quad Milo Kim
2 siblings, 2 replies; 14+ messages in thread
From: Milo Kim @ 2016-12-09 1:04 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer
Cc: Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel, Milo Kim
Common savageboard DT file is used for board support.
Specify this dtb file for i.MX6Q build.
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6dl-savageboard.dts | 50 ++++++++++++++++++++++++++++++++
2 files changed, 51 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-savageboard.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c558ba7..64660c7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -348,6 +348,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-sabreauto.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
+ imx6dl-savageboard.dtb \
imx6dl-ts4900.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6s-8034.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/imx6dl-savageboard.dts
new file mode 100644
index 0000000..2cac30d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-savageboard.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+ model = "Poslab SavageBoard Dual";
+ compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl";
+};
--
2.9.3
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual
2016-12-09 1:04 ` [PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual Milo Kim
@ 2016-12-26 16:27 ` Fabio Estevam
2017-01-02 7:03 ` Shawn Guo
1 sibling, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2016-12-26 16:27 UTC (permalink / raw)
To: Milo Kim
Cc: Shawn Guo, Sascha Hauer, Fabio Estevam, devicetree, linux-kernel,
linux-arm-kernel
On Thu, Dec 8, 2016 at 11:04 PM, Milo Kim <woogyom.kim@gmail.com> wrote:
> Common savageboard DT file is used for board support.
> Specify this dtb file for i.MX6Q build.
>
> Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual
2016-12-09 1:04 ` [PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual Milo Kim
2016-12-26 16:27 ` Fabio Estevam
@ 2017-01-02 7:03 ` Shawn Guo
2017-01-02 7:32 ` Milo Kim
1 sibling, 1 reply; 14+ messages in thread
From: Shawn Guo @ 2017-01-02 7:03 UTC (permalink / raw)
To: Milo Kim
Cc: Sascha Hauer, Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel
On Fri, Dec 09, 2016 at 10:04:35AM +0900, Milo Kim wrote:
> Common savageboard DT file is used for board support.
> Specify this dtb file for i.MX6Q build.
>
> Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6dl-savageboard.dts | 50 ++++++++++++++++++++++++++++++++
> 2 files changed, 51 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6dl-savageboard.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c558ba7..64660c7 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -348,6 +348,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6dl-sabreauto.dtb \
> imx6dl-sabrelite.dtb \
> imx6dl-sabresd.dtb \
> + imx6dl-savageboard.dtb \
> imx6dl-ts4900.dtb \
> imx6dl-tx6dl-comtft.dtb \
> imx6dl-tx6s-8034.dtb \
> diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/imx6dl-savageboard.dts
> new file mode 100644
> index 0000000..2cac30d
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-savageboard.dts
> @@ -0,0 +1,50 @@
> +/*
> + * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-savageboard.dtsi"
> +
> +/ {
> + model = "Poslab SavageBoard Dual";
> + compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl";
It seems that 'poslab' should be added to
Documentation/devicetree/bindings/vendor-prefixes.txt.
Shawn
> +};
> --
> 2.9.3
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual
2017-01-02 7:03 ` Shawn Guo
@ 2017-01-02 7:32 ` Milo Kim
0 siblings, 0 replies; 14+ messages in thread
From: Milo Kim @ 2017-01-02 7:32 UTC (permalink / raw)
To: Shawn Guo
Cc: Sascha Hauer, Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel
On 01/02/2017 04:03 PM, Shawn Guo wrote:
>> + model = "Poslab SavageBoard Dual";
>> + compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl";
> It seems that 'poslab' should be added to
> Documentation/devicetree/bindings/vendor-prefixes.txt
Ah, right. Thanks for the review!
Best regards,
Milo
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v3 3/3] ARM: dts: imx6: Support Savageboard quad
2016-12-09 1:04 [PATCH v3 0/3] ARM: dts: imx6: Support Poslab Savageboard dual & quad Milo Kim
2016-12-09 1:04 ` [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file Milo Kim
2016-12-09 1:04 ` [PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual Milo Kim
@ 2016-12-09 1:04 ` Milo Kim
2 siblings, 0 replies; 14+ messages in thread
From: Milo Kim @ 2016-12-09 1:04 UTC (permalink / raw)
To: Shawn Guo, Sascha Hauer
Cc: Fabio Estevam, linux-arm-kernel, devicetree, linux-kernel, Milo Kim
Use common board file and support SATA interface additionally.
Specify this dtb file for i.MX6 build.
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-savageboard.dts | 54 +++++++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-savageboard.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 64660c7..25b1e19 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -392,6 +392,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
+ imx6q-savageboard.dtb \
imx6q-sbc6x.dtb \
imx6q-tbs2910.dtb \
imx6q-ts4900.dtb \
diff --git a/arch/arm/boot/dts/imx6q-savageboard.dts b/arch/arm/boot/dts/imx6q-savageboard.dts
new file mode 100644
index 0000000..8d74002
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-savageboard.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+ model = "Poslab SavageBoard Quad";
+ compatible = "poslab,imx6q-savageboard", "fsl,imx6q";
+};
+
+&sata {
+ status = "okay";
+};
--
2.9.3
^ permalink raw reply related [flat|nested] 14+ messages in thread