* [v5 1/2] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list @ 2019-01-25 8:10 Peng Ma 2019-01-25 8:10 ` [v5 2/2] arm64: dts: lx2160a: add sata node support Peng Ma 2019-01-30 16:22 ` [v5 1/2] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list Rob Herring 0 siblings, 2 replies; 10+ messages in thread From: Peng Ma @ 2019-01-25 8:10 UTC (permalink / raw) To: axboe, shawnguo Cc: robh+dt, mark.rutland, leoyang.li, linux-ide, devicetree, linux-kernel, linux-arm-kernel, andy.tang, Peng Ma Add lx2160a compatible to bindings documentation. Signed-off-by: Peng Ma <peng.ma@nxp.com> --- changed for V5: - change the lxx2160a to lx2160a .../devicetree/bindings/ata/ahci-fsl-qoriq.txt | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt index 7c3ca0e..9ecc019 100644 --- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt +++ b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt @@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller Required properties: - reg: Physical base address and size of the controller's register area. - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where - chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc. + chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a, lx2160a, etc. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt binding. -- 1.7.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [v5 2/2] arm64: dts: lx2160a: add sata node support 2019-01-25 8:10 [v5 1/2] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list Peng Ma @ 2019-01-25 8:10 ` Peng Ma 2019-02-01 6:30 ` Shawn Guo 2019-02-12 19:00 ` Mian Yousaf Kaukab 2019-01-30 16:22 ` [v5 1/2] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list Rob Herring 1 sibling, 2 replies; 10+ messages in thread From: Peng Ma @ 2019-01-25 8:10 UTC (permalink / raw) To: axboe, shawnguo Cc: robh+dt, mark.rutland, leoyang.li, linux-ide, devicetree, linux-kernel, linux-arm-kernel, andy.tang, Peng Ma Add SATA device nodes for fsl-lx2160a and enable support for QDS and RDB boards. Signed-off-by: Peng Ma <peng.ma@nxp.com> --- changed for V5: - no change arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++ 3 files changed, 76 insertions(+), 0 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 99a22ab..1a5acf6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -95,6 +95,22 @@ }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 6481e5f..5b6799e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -102,6 +102,22 @@ }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index a79f5c1..592034b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -671,6 +671,50 @@ status = "disabled"; }; + sata0: sata@3200000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata1: sata@3210000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata2: sata@3220000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3220000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + + sata3: sata@3230000 { + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3230000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + dma-coherent; + status = "disabled"; + }; + smmu: iommu@5000000 { compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; -- 1.7.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [v5 2/2] arm64: dts: lx2160a: add sata node support 2019-01-25 8:10 ` [v5 2/2] arm64: dts: lx2160a: add sata node support Peng Ma @ 2019-02-01 6:30 ` Shawn Guo 2019-02-11 2:53 ` Peng Ma 2019-02-12 19:00 ` Mian Yousaf Kaukab 1 sibling, 1 reply; 10+ messages in thread From: Shawn Guo @ 2019-02-01 6:30 UTC (permalink / raw) To: Peng Ma Cc: axboe, robh+dt, mark.rutland, leoyang.li, linux-ide, devicetree, linux-kernel, linux-arm-kernel, andy.tang On Fri, Jan 25, 2019 at 08:10:13AM +0000, Peng Ma wrote: > Add SATA device nodes for fsl-lx2160a and enable support > for QDS and RDB boards. > > Signed-off-by: Peng Ma <peng.ma@nxp.com> > --- > changed for V5: > - no change > > arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ > arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ > arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++ > 3 files changed, 76 insertions(+), 0 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > index 99a22ab..1a5acf6 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > @@ -95,6 +95,22 @@ > }; > }; > > +&sata0 { > + status = "okay"; > +}; > + > +&sata1 { > + status = "okay"; > +}; > + > +&sata2 { > + status = "okay"; > +}; > + > +&sata3 { > + status = "okay"; > +}; > + > &uart0 { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > index 6481e5f..5b6799e 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > @@ -102,6 +102,22 @@ > }; > }; > > +&sata0 { > + status = "okay"; > +}; > + > +&sata1 { > + status = "okay"; > +}; > + > +&sata2 { > + status = "okay"; > +}; > + > +&sata3 { > + status = "okay"; > +}; > + > &uart0 { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > index a79f5c1..592034b 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > @@ -671,6 +671,50 @@ > status = "disabled"; > }; > > + sata0: sata@3200000 { > + compatible = "fsl,lx2160a-ahci"; Has the kernel driver been patched to probe the compatible? Shawn > + reg = <0x0 0x3200000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + status = "disabled"; > + }; > + > + sata1: sata@3210000 { > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3210000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + status = "disabled"; > + }; > + > + sata2: sata@3220000 { > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3220000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + status = "disabled"; > + }; > + > + sata3: sata@3230000 { > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3230000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + status = "disabled"; > + }; > + > smmu: iommu@5000000 { > compatible = "arm,mmu-500"; > reg = <0 0x5000000 0 0x800000>; > -- > 1.7.1 > ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [v5 2/2] arm64: dts: lx2160a: add sata node support 2019-02-01 6:30 ` Shawn Guo @ 2019-02-11 2:53 ` Peng Ma 2019-02-11 5:39 ` Shawn Guo 0 siblings, 1 reply; 10+ messages in thread From: Peng Ma @ 2019-02-11 2:53 UTC (permalink / raw) To: Shawn Guo Cc: axboe, robh+dt, mark.rutland, Leo Li, linux-ide, devicetree, linux-kernel, linux-arm-kernel, Andy Tang >-----Original Message----- >From: Shawn Guo <shawnguo@kernel.org> >Sent: 2019年2月1日 14:30 >To: Peng Ma <peng.ma@nxp.com> >Cc: axboe@kernel.dk; robh+dt@kernel.org; mark.rutland@arm.com; Leo Li ><leoyang.li@nxp.com>; linux-ide@vger.kernel.org; devicetree@vger.kernel.org; >linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Andy Tang ><andy.tang@nxp.com> >Subject: Re: [v5 2/2] arm64: dts: lx2160a: add sata node support > >On Fri, Jan 25, 2019 at 08:10:13AM +0000, Peng Ma wrote: >> Add SATA device nodes for fsl-lx2160a and enable support for QDS and >> RDB boards. >> >> Signed-off-by: Peng Ma <peng.ma@nxp.com> >> --- >> changed for V5: >> - no change >> >> arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ >> arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ >> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 >+++++++++++++++++++++ >> 3 files changed, 76 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> index 99a22ab..1a5acf6 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> @@ -95,6 +95,22 @@ >> }; >> }; >> >> +&sata0 { >> + status = "okay"; >> +}; >> + >> +&sata1 { >> + status = "okay"; >> +}; >> + >> +&sata2 { >> + status = "okay"; >> +}; >> + >> +&sata3 { >> + status = "okay"; >> +}; >> + >> &uart0 { >> status = "okay"; >> }; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> index 6481e5f..5b6799e 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> @@ -102,6 +102,22 @@ >> }; >> }; >> >> +&sata0 { >> + status = "okay"; >> +}; >> + >> +&sata1 { >> + status = "okay"; >> +}; >> + >> +&sata2 { >> + status = "okay"; >> +}; >> + >> +&sata3 { >> + status = "okay"; >> +}; >> + >> &uart0 { >> status = "okay"; >> }; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> index a79f5c1..592034b 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> @@ -671,6 +671,50 @@ >> status = "disabled"; >> }; >> >> + sata0: sata@3200000 { >> + compatible = "fsl,lx2160a-ahci"; > >Has the kernel driver been patched to probe the compatible? > >Shawn Yes, the driver patch is http://patchwork.ozlabs.org/patch/1034083/ BR Peng > >> + reg = <0x0 0x3200000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + status = "disabled"; >> + }; >> + >> + sata1: sata@3210000 { >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3210000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + status = "disabled"; >> + }; >> + >> + sata2: sata@3220000 { >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3220000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + status = "disabled"; >> + }; >> + >> + sata3: sata@3230000 { >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3230000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + status = "disabled"; >> + }; >> + >> smmu: iommu@5000000 { >> compatible = "arm,mmu-500"; >> reg = <0 0x5000000 0 0x800000>; >> -- >> 1.7.1 >> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [v5 2/2] arm64: dts: lx2160a: add sata node support 2019-02-11 2:53 ` Peng Ma @ 2019-02-11 5:39 ` Shawn Guo 2019-02-11 6:47 ` Peng Ma 0 siblings, 1 reply; 10+ messages in thread From: Shawn Guo @ 2019-02-11 5:39 UTC (permalink / raw) To: Peng Ma Cc: axboe, mark.rutland, Andy Tang, devicetree, linux-kernel, Leo Li, linux-ide, robh+dt, linux-arm-kernel On Mon, Feb 11, 2019 at 02:53:18AM +0000, Peng Ma wrote: > > > >-----Original Message----- > >From: Shawn Guo <shawnguo@kernel.org> > >Sent: 2019年2月1日 14:30 > >To: Peng Ma <peng.ma@nxp.com> > >Cc: axboe@kernel.dk; robh+dt@kernel.org; mark.rutland@arm.com; Leo Li > ><leoyang.li@nxp.com>; linux-ide@vger.kernel.org; devicetree@vger.kernel.org; > >linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Andy Tang > ><andy.tang@nxp.com> > >Subject: Re: [v5 2/2] arm64: dts: lx2160a: add sata node support > > > >On Fri, Jan 25, 2019 at 08:10:13AM +0000, Peng Ma wrote: > >> Add SATA device nodes for fsl-lx2160a and enable support for QDS and > >> RDB boards. > >> > >> Signed-off-by: Peng Ma <peng.ma@nxp.com> > >> --- > >> changed for V5: > >> - no change > >> > >> arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ > >> arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ > >> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 > >+++++++++++++++++++++ > >> 3 files changed, 76 insertions(+), 0 deletions(-) > >> > >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > >> index 99a22ab..1a5acf6 100644 > >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > >> @@ -95,6 +95,22 @@ > >> }; > >> }; > >> > >> +&sata0 { > >> + status = "okay"; > >> +}; > >> + > >> +&sata1 { > >> + status = "okay"; > >> +}; > >> + > >> +&sata2 { > >> + status = "okay"; > >> +}; > >> + > >> +&sata3 { > >> + status = "okay"; > >> +}; > >> + > >> &uart0 { > >> status = "okay"; > >> }; > >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > >> index 6481e5f..5b6799e 100644 > >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > >> @@ -102,6 +102,22 @@ > >> }; > >> }; > >> > >> +&sata0 { > >> + status = "okay"; > >> +}; > >> + > >> +&sata1 { > >> + status = "okay"; > >> +}; > >> + > >> +&sata2 { > >> + status = "okay"; > >> +}; > >> + > >> +&sata3 { > >> + status = "okay"; > >> +}; > >> + > >> &uart0 { > >> status = "okay"; > >> }; > >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > >> index a79f5c1..592034b 100644 > >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > >> @@ -671,6 +671,50 @@ > >> status = "disabled"; > >> }; > >> > >> + sata0: sata@3200000 { > >> + compatible = "fsl,lx2160a-ahci"; > > > >Has the kernel driver been patched to probe the compatible? > > > >Shawn > Yes, the driver patch is http://patchwork.ozlabs.org/patch/1034083/ Ping me when the driver patch is accepted. Ideally, we only accept dts changes after the driver counterpart lands on mainline. Shawn ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [v5 2/2] arm64: dts: lx2160a: add sata node support 2019-02-11 5:39 ` Shawn Guo @ 2019-02-11 6:47 ` Peng Ma 0 siblings, 0 replies; 10+ messages in thread From: Peng Ma @ 2019-02-11 6:47 UTC (permalink / raw) To: Shawn Guo Cc: axboe, mark.rutland, Andy Tang, devicetree, linux-kernel, Leo Li, linux-ide, robh+dt, linux-arm-kernel >-----Original Message----- >From: Shawn Guo <shawnguo@kernel.org> >Sent: 2019年2月11日 13:39 >To: Peng Ma <peng.ma@nxp.com> >Cc: axboe@kernel.dk; mark.rutland@arm.com; Andy Tang ><andy.tang@nxp.com>; devicetree@vger.kernel.org; >linux-kernel@vger.kernel.org; Leo Li <leoyang.li@nxp.com>; >linux-ide@vger.kernel.org; robh+dt@kernel.org; >linux-arm-kernel@lists.infradead.org >Subject: Re: [v5 2/2] arm64: dts: lx2160a: add sata node support > >On Mon, Feb 11, 2019 at 02:53:18AM +0000, Peng Ma wrote: >> >> >> >-----Original Message----- >> >From: Shawn Guo <shawnguo@kernel.org> >> >Sent: 2019年2月1日 14:30 >> >To: Peng Ma <peng.ma@nxp.com> >> >Cc: axboe@kernel.dk; robh+dt@kernel.org; mark.rutland@arm.com; Leo Li >> ><leoyang.li@nxp.com>; linux-ide@vger.kernel.org; >> >devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; >> >linux-arm-kernel@lists.infradead.org; Andy Tang <andy.tang@nxp.com> >> >Subject: Re: [v5 2/2] arm64: dts: lx2160a: add sata node support >> > >> >On Fri, Jan 25, 2019 at 08:10:13AM +0000, Peng Ma wrote: >> >> Add SATA device nodes for fsl-lx2160a and enable support for QDS >> >> and RDB boards. >> >> >> >> Signed-off-by: Peng Ma <peng.ma@nxp.com> >> >> --- >> >> changed for V5: >> >> - no change >> >> >> >> arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ >> >> arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ >> >> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 >> >+++++++++++++++++++++ >> >> 3 files changed, 76 insertions(+), 0 deletions(-) >> >> >> >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> >> index 99a22ab..1a5acf6 100644 >> >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> >> @@ -95,6 +95,22 @@ >> >> }; >> >> }; >> >> >> >> +&sata0 { >> >> + status = "okay"; >> >> +}; >> >> + >> >> +&sata1 { >> >> + status = "okay"; >> >> +}; >> >> + >> >> +&sata2 { >> >> + status = "okay"; >> >> +}; >> >> + >> >> +&sata3 { >> >> + status = "okay"; >> >> +}; >> >> + >> >> &uart0 { >> >> status = "okay"; >> >> }; >> >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> >> index 6481e5f..5b6799e 100644 >> >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> >> @@ -102,6 +102,22 @@ >> >> }; >> >> }; >> >> >> >> +&sata0 { >> >> + status = "okay"; >> >> +}; >> >> + >> >> +&sata1 { >> >> + status = "okay"; >> >> +}; >> >> + >> >> +&sata2 { >> >> + status = "okay"; >> >> +}; >> >> + >> >> +&sata3 { >> >> + status = "okay"; >> >> +}; >> >> + >> >> &uart0 { >> >> status = "okay"; >> >> }; >> >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> >> index a79f5c1..592034b 100644 >> >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> >> @@ -671,6 +671,50 @@ >> >> status = "disabled"; >> >> }; >> >> >> >> + sata0: sata@3200000 { >> >> + compatible = "fsl,lx2160a-ahci"; >> > >> >Has the kernel driver been patched to probe the compatible? >> > >> >Shawn >> Yes, the driver patch is >> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatc >> >hwork.ozlabs.org%2Fpatch%2F1034083%2F&data=02%7C01%7Cpeng.ma >%40nxp >> .com%7C8daea4e4b2ea419cb2a008d68fe34f51%7C686ea1d3bc2b4c6fa92c >d99c5c30 >> >1635%7C0%7C0%7C636854603794170576&sdata=z3ic8%2FAS10NcFjdP >eJFpnFoo >> R2Yo4oYO%2FAASr7r2Lhg%3D&reserved=0 > >Ping me when the driver patch is accepted. Ideally, we only accept dts >changes after the driver counterpart lands on mainline. > >Shawn [Peng Ma] got it, thanks. BR Peng ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [v5 2/2] arm64: dts: lx2160a: add sata node support 2019-01-25 8:10 ` [v5 2/2] arm64: dts: lx2160a: add sata node support Peng Ma 2019-02-01 6:30 ` Shawn Guo @ 2019-02-12 19:00 ` Mian Yousaf Kaukab 2019-02-14 9:18 ` Peng Ma 1 sibling, 1 reply; 10+ messages in thread From: Mian Yousaf Kaukab @ 2019-02-12 19:00 UTC (permalink / raw) To: Peng Ma Cc: axboe, shawnguo, robh+dt, mark.rutland, leoyang.li, linux-ide, devicetree, linux-kernel, linux-arm-kernel, andy.tang On Fri, Jan 25, 2019 at 08:10:13AM +0000, Peng Ma wrote: > Add SATA device nodes for fsl-lx2160a and enable support > for QDS and RDB boards. > > Signed-off-by: Peng Ma <peng.ma@nxp.com> > --- > changed for V5: > - no change > > arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ > arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ > arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 +++++++++++++++++++++ > 3 files changed, 76 insertions(+), 0 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > index 99a22ab..1a5acf6 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts > @@ -95,6 +95,22 @@ > }; > }; > > +&sata0 { > + status = "okay"; > +}; > + > +&sata1 { > + status = "okay"; > +}; > + > +&sata2 { > + status = "okay"; > +}; > + > +&sata3 { > + status = "okay"; > +}; > + > &uart0 { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > index 6481e5f..5b6799e 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts > @@ -102,6 +102,22 @@ > }; > }; > > +&sata0 { > + status = "okay"; > +}; > + > +&sata1 { > + status = "okay"; > +}; > + > +&sata2 { > + status = "okay"; > +}; > + > +&sata3 { > + status = "okay"; > +}; > + > &uart0 { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > index a79f5c1..592034b 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi > @@ -671,6 +671,50 @@ > status = "disabled"; > }; > > + sata0: sata@3200000 { > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3200000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + status = "disabled"; > + }; > + > + sata1: sata@3210000 { > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3210000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + status = "disabled"; > + }; > + > + sata2: sata@3220000 { > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3220000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + status = "disabled"; > + }; > + > + sata3: sata@3230000 { > + compatible = "fsl,lx2160a-ahci"; > + reg = <0x0 0x3230000 0x0 0x10000>, > + <0x7 0x100520 0x0 0x4>; You are using same reg values for sata-ecc in all sata instances. Does this actually work? No errors when the ahci_qoriq driver do ioremap on it while probing second instance and onward? fsl-ls208xa.dtsi is the only other file here with multiple sata instances and it doesn’t care about sata-ecc. > + reg-names = "ahci", "sata-ecc"; > + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clockgen 4 3>; > + dma-coherent; > + status = "disabled"; > + }; > + > smmu: iommu@5000000 { > compatible = "arm,mmu-500"; > reg = <0 0x5000000 0 0x800000>; BR, Yousaf ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [v5 2/2] arm64: dts: lx2160a: add sata node support 2019-02-12 19:00 ` Mian Yousaf Kaukab @ 2019-02-14 9:18 ` Peng Ma 2019-02-20 9:09 ` Peng Ma 0 siblings, 1 reply; 10+ messages in thread From: Peng Ma @ 2019-02-14 9:18 UTC (permalink / raw) To: Mian Yousaf Kaukab Cc: axboe, shawnguo, robh+dt, mark.rutland, Leo Li, linux-ide, devicetree, linux-kernel, linux-arm-kernel, Andy Tang >-----Original Message----- >From: Mian Yousaf Kaukab <ykaukab@suse.de> >Sent: 2019年2月13日 3:01 >To: Peng Ma <peng.ma@nxp.com> >Cc: axboe@kernel.dk; shawnguo@kernel.org; robh+dt@kernel.org; >mark.rutland@arm.com; Leo Li <leoyang.li@nxp.com>; >linux-ide@vger.kernel.org; devicetree@vger.kernel.org; >linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Andy Tang ><andy.tang@nxp.com> >Subject: Re: [v5 2/2] arm64: dts: lx2160a: add sata node support > >On Fri, Jan 25, 2019 at 08:10:13AM +0000, Peng Ma wrote: >> Add SATA device nodes for fsl-lx2160a and enable support for QDS and >> RDB boards. >> >> Signed-off-by: Peng Ma <peng.ma@nxp.com> >> --- >> changed for V5: >> - no change >> >> arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ >> arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ >> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 >+++++++++++++++++++++ >> 3 files changed, 76 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> index 99a22ab..1a5acf6 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >> @@ -95,6 +95,22 @@ >> }; >> }; >> >> +&sata0 { >> + status = "okay"; >> +}; >> + >> +&sata1 { >> + status = "okay"; >> +}; >> + >> +&sata2 { >> + status = "okay"; >> +}; >> + >> +&sata3 { >> + status = "okay"; >> +}; >> + >> &uart0 { >> status = "okay"; >> }; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> index 6481e5f..5b6799e 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >> @@ -102,6 +102,22 @@ >> }; >> }; >> >> +&sata0 { >> + status = "okay"; >> +}; >> + >> +&sata1 { >> + status = "okay"; >> +}; >> + >> +&sata2 { >> + status = "okay"; >> +}; >> + >> +&sata3 { >> + status = "okay"; >> +}; >> + >> &uart0 { >> status = "okay"; >> }; >> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> index a79f5c1..592034b 100644 >> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >> @@ -671,6 +671,50 @@ >> status = "disabled"; >> }; >> >> + sata0: sata@3200000 { >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3200000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + status = "disabled"; >> + }; >> + >> + sata1: sata@3210000 { >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3210000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + status = "disabled"; >> + }; >> + >> + sata2: sata@3220000 { >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3220000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + status = "disabled"; >> + }; >> + >> + sata3: sata@3230000 { >> + compatible = "fsl,lx2160a-ahci"; >> + reg = <0x0 0x3230000 0x0 0x10000>, >> + <0x7 0x100520 0x0 0x4>; >You are using same reg values for sata-ecc in all sata instances. Does this >actually work? No errors when the ahci_qoriq driver do ioremap on it while >probing second instance and onward? > Thanks for you point out the problem. I will fixed it with two or more sata enable. >fsl-ls208xa.dtsi is the only other file here with multiple sata instances and it >doesn’t care about sata-ecc. > The ls208xa platforms is not necessary to set sata-ecc addr. BR, Peng >> + reg-names = "ahci", "sata-ecc"; >> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&clockgen 4 3>; >> + dma-coherent; >> + status = "disabled"; >> + }; >> + >> smmu: iommu@5000000 { >> compatible = "arm,mmu-500"; >> reg = <0 0x5000000 0 0x800000>; > >BR, >Yousaf ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [v5 2/2] arm64: dts: lx2160a: add sata node support 2019-02-14 9:18 ` Peng Ma @ 2019-02-20 9:09 ` Peng Ma 0 siblings, 0 replies; 10+ messages in thread From: Peng Ma @ 2019-02-20 9:09 UTC (permalink / raw) To: Mian Yousaf Kaukab Cc: axboe, shawnguo, robh+dt, mark.rutland, Leo Li, linux-ide, devicetree, linux-kernel, linux-arm-kernel, Andy Tang Hi Yousaf, To set sata bit of ecc-addr will affect all sata controllers, The v6 patch has been sent will fixed the remap error when two or more sata controllers be probed, please review. Thanks. Best Regards, Peng >-----Original Message----- >From: Peng Ma >Sent: 2019年2月14日 17:19 >To: 'Mian Yousaf Kaukab' <ykaukab@suse.de> >Cc: axboe@kernel.dk; shawnguo@kernel.org; robh+dt@kernel.org; >mark.rutland@arm.com; Leo Li <leoyang.li@nxp.com>; >linux-ide@vger.kernel.org; devicetree@vger.kernel.org; >linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Andy Tang ><andy.tang@nxp.com> >Subject: RE: [v5 2/2] arm64: dts: lx2160a: add sata node support > > > >>-----Original Message----- >>From: Mian Yousaf Kaukab <ykaukab@suse.de> >>Sent: 2019年2月13日 3:01 >>To: Peng Ma <peng.ma@nxp.com> >>Cc: axboe@kernel.dk; shawnguo@kernel.org; robh+dt@kernel.org; >>mark.rutland@arm.com; Leo Li <leoyang.li@nxp.com>; >>linux-ide@vger.kernel.org; devicetree@vger.kernel.org; >>linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; >>Andy Tang <andy.tang@nxp.com> >>Subject: Re: [v5 2/2] arm64: dts: lx2160a: add sata node support >> >>On Fri, Jan 25, 2019 at 08:10:13AM +0000, Peng Ma wrote: >>> Add SATA device nodes for fsl-lx2160a and enable support for QDS and >>> RDB boards. >>> >>> Signed-off-by: Peng Ma <peng.ma@nxp.com> >>> --- >>> changed for V5: >>> - no change >>> >>> arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 16 +++++++ >>> arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++ >>> arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 44 >>+++++++++++++++++++++ >>> 3 files changed, 76 insertions(+), 0 deletions(-) >>> >>> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >>> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >>> index 99a22ab..1a5acf6 100644 >>> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >>> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts >>> @@ -95,6 +95,22 @@ >>> }; >>> }; >>> >>> +&sata0 { >>> + status = "okay"; >>> +}; >>> + >>> +&sata1 { >>> + status = "okay"; >>> +}; >>> + >>> +&sata2 { >>> + status = "okay"; >>> +}; >>> + >>> +&sata3 { >>> + status = "okay"; >>> +}; >>> + >>> &uart0 { >>> status = "okay"; >>> }; >>> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >>> b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >>> index 6481e5f..5b6799e 100644 >>> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >>> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts >>> @@ -102,6 +102,22 @@ >>> }; >>> }; >>> >>> +&sata0 { >>> + status = "okay"; >>> +}; >>> + >>> +&sata1 { >>> + status = "okay"; >>> +}; >>> + >>> +&sata2 { >>> + status = "okay"; >>> +}; >>> + >>> +&sata3 { >>> + status = "okay"; >>> +}; >>> + >>> &uart0 { >>> status = "okay"; >>> }; >>> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >>> b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >>> index a79f5c1..592034b 100644 >>> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >>> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi >>> @@ -671,6 +671,50 @@ >>> status = "disabled"; >>> }; >>> >>> + sata0: sata@3200000 { >>> + compatible = "fsl,lx2160a-ahci"; >>> + reg = <0x0 0x3200000 0x0 0x10000>, >>> + <0x7 0x100520 0x0 0x4>; >>> + reg-names = "ahci", "sata-ecc"; >>> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; >>> + clocks = <&clockgen 4 3>; >>> + dma-coherent; >>> + status = "disabled"; >>> + }; >>> + >>> + sata1: sata@3210000 { >>> + compatible = "fsl,lx2160a-ahci"; >>> + reg = <0x0 0x3210000 0x0 0x10000>, >>> + <0x7 0x100520 0x0 0x4>; >>> + reg-names = "ahci", "sata-ecc"; >>> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; >>> + clocks = <&clockgen 4 3>; >>> + dma-coherent; >>> + status = "disabled"; >>> + }; >>> + >>> + sata2: sata@3220000 { >>> + compatible = "fsl,lx2160a-ahci"; >>> + reg = <0x0 0x3220000 0x0 0x10000>, >>> + <0x7 0x100520 0x0 0x4>; >>> + reg-names = "ahci", "sata-ecc"; >>> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; >>> + clocks = <&clockgen 4 3>; >>> + dma-coherent; >>> + status = "disabled"; >>> + }; >>> + >>> + sata3: sata@3230000 { >>> + compatible = "fsl,lx2160a-ahci"; >>> + reg = <0x0 0x3230000 0x0 0x10000>, >>> + <0x7 0x100520 0x0 0x4>; >>You are using same reg values for sata-ecc in all sata instances. Does >>this actually work? No errors when the ahci_qoriq driver do ioremap on >>it while probing second instance and onward? >> > Thanks for you point out the problem. I will fixed it with two or more sata >enable. >>fsl-ls208xa.dtsi is the only other file here with multiple sata >>instances and it doesn’t care about sata-ecc. >> >The ls208xa platforms is not necessary to set sata-ecc addr. >BR, >Peng >>> + reg-names = "ahci", "sata-ecc"; >>> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; >>> + clocks = <&clockgen 4 3>; >>> + dma-coherent; >>> + status = "disabled"; >>> + }; >>> + >>> smmu: iommu@5000000 { >>> compatible = "arm,mmu-500"; >>> reg = <0 0x5000000 0 0x800000>; >> >>BR, >>Yousaf ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [v5 1/2] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list 2019-01-25 8:10 [v5 1/2] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list Peng Ma 2019-01-25 8:10 ` [v5 2/2] arm64: dts: lx2160a: add sata node support Peng Ma @ 2019-01-30 16:22 ` Rob Herring 1 sibling, 0 replies; 10+ messages in thread From: Rob Herring @ 2019-01-30 16:22 UTC (permalink / raw) To: Peng Ma Cc: axboe, shawnguo, robh+dt, mark.rutland, leoyang.li, linux-ide, devicetree, linux-kernel, linux-arm-kernel, andy.tang, Peng Ma On Fri, 25 Jan 2019 08:10:12 +0000, Peng Ma wrote: > Add lx2160a compatible to bindings documentation. > > Signed-off-by: Peng Ma <peng.ma@nxp.com> > --- > changed for V5: > - change the lxx2160a to lx2160a > > .../devicetree/bindings/ata/ahci-fsl-qoriq.txt | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-02-20 9:09 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-01-25 8:10 [v5 1/2] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list Peng Ma 2019-01-25 8:10 ` [v5 2/2] arm64: dts: lx2160a: add sata node support Peng Ma 2019-02-01 6:30 ` Shawn Guo 2019-02-11 2:53 ` Peng Ma 2019-02-11 5:39 ` Shawn Guo 2019-02-11 6:47 ` Peng Ma 2019-02-12 19:00 ` Mian Yousaf Kaukab 2019-02-14 9:18 ` Peng Ma 2019-02-20 9:09 ` Peng Ma 2019-01-30 16:22 ` [v5 1/2] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).