* [PATCH 0/3] x86/vdso: Add support for CLOCK_MONOTONIC_RAW in the vDSO @ 2019-04-11 10:12 Huw Davies 2019-04-11 10:12 ` [PATCH 1/3] x86/vdso: Remove unused 'mask' member Huw Davies ` (2 more replies) 0 siblings, 3 replies; 11+ messages in thread From: Huw Davies @ 2019-04-11 10:12 UTC (permalink / raw) To: linux kernel; +Cc: Thomas Gleixner, Andy Lutomirski This series adds support for the CLOCK_MONOTONIC_RAW clock in the x86 vDSO, thus decreasing its readout cost. This is particularly useful for Wine which needs to implement Win32 API clock functions whose value does not get adjusted with adjtimex(). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Huw Davies (3): x86/vdso: Remove unused 'mask' member x86/vdso: Allow clock specific mult and shift values x86/vdso: Add support for CLOCK_MONOTONIC_RAW in the vDSO arch/x86/entry/vdso/vclock_gettime.c | 4 ++-- arch/x86/entry/vsyscall/vsyscall_gtod.c | 15 ++++++++++++--- arch/x86/include/asm/vgtod.h | 10 +++++----- 3 files changed, 19 insertions(+), 10 deletions(-) -- 2.17.1 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/3] x86/vdso: Remove unused 'mask' member 2019-04-11 10:12 [PATCH 0/3] x86/vdso: Add support for CLOCK_MONOTONIC_RAW in the vDSO Huw Davies @ 2019-04-11 10:12 ` Huw Davies 2019-04-14 10:36 ` Thomas Gleixner 2019-04-11 10:12 ` [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values Huw Davies 2019-04-11 10:12 ` [PATCH 3/3] x86/vdso: Add support for CLOCK_MONOTONIC_RAW in the vDSO Huw Davies 2 siblings, 1 reply; 11+ messages in thread From: Huw Davies @ 2019-04-11 10:12 UTC (permalink / raw) To: linux kernel; +Cc: Thomas Gleixner, Andy Lutomirski The 'mask' member of struct vsyscall_gtod_data is unused, so remove it. Its use was removed in commit a51e996d48ac (x86/vdso: Enforce 64bit clocksource). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Huw Davies <huw@codeweavers.com> --- arch/x86/entry/vsyscall/vsyscall_gtod.c | 1 - arch/x86/include/asm/vgtod.h | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/x86/entry/vsyscall/vsyscall_gtod.c b/arch/x86/entry/vsyscall/vsyscall_gtod.c index cfcdba082feb..e4ee83018279 100644 --- a/arch/x86/entry/vsyscall/vsyscall_gtod.c +++ b/arch/x86/entry/vsyscall/vsyscall_gtod.c @@ -43,7 +43,6 @@ void update_vsyscall(struct timekeeper *tk) /* copy vsyscall data */ vdata->vclock_mode = vclock_mode; vdata->cycle_last = tk->tkr_mono.cycle_last; - vdata->mask = tk->tkr_mono.mask; vdata->mult = tk->tkr_mono.mult; vdata->shift = tk->tkr_mono.shift; diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h index 913a133f8e6f..daf69a25e46b 100644 --- a/arch/x86/include/asm/vgtod.h +++ b/arch/x86/include/asm/vgtod.h @@ -40,7 +40,6 @@ struct vsyscall_gtod_data { int vclock_mode; u64 cycle_last; - u64 mask; u32 mult; u32 shift; -- 2.17.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 1/3] x86/vdso: Remove unused 'mask' member 2019-04-11 10:12 ` [PATCH 1/3] x86/vdso: Remove unused 'mask' member Huw Davies @ 2019-04-14 10:36 ` Thomas Gleixner 0 siblings, 0 replies; 11+ messages in thread From: Thomas Gleixner @ 2019-04-14 10:36 UTC (permalink / raw) To: Huw Davies; +Cc: linux kernel, Andy Lutomirski On Thu, 11 Apr 2019, Huw Davies wrote: > The 'mask' member of struct vsyscall_gtod_data is unused, so remove > it. Its use was removed in commit a51e996d48ac (x86/vdso: Enforce > 64bit clocksource). That's true, but we are moving the VDSO to generic code, so the mask will stay. Thanks, tglx ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values 2019-04-11 10:12 [PATCH 0/3] x86/vdso: Add support for CLOCK_MONOTONIC_RAW in the vDSO Huw Davies 2019-04-11 10:12 ` [PATCH 1/3] x86/vdso: Remove unused 'mask' member Huw Davies @ 2019-04-11 10:12 ` Huw Davies 2019-04-14 10:53 ` Thomas Gleixner 2019-04-11 10:12 ` [PATCH 3/3] x86/vdso: Add support for CLOCK_MONOTONIC_RAW in the vDSO Huw Davies 2 siblings, 1 reply; 11+ messages in thread From: Huw Davies @ 2019-04-11 10:12 UTC (permalink / raw) To: linux kernel; +Cc: Thomas Gleixner, Andy Lutomirski This will allow clocks with different mult and shift values, e.g. CLOCK_MONOTONIC_RAW, to be supported in the vDSO. The coarse clocks do not require these data so the values are not copied for these clocks. One could add potential new values of mult and shift alongside the existing values in struct vsyscall_gtod_data, but it seems more natural to group them with the actual clock data in the basetime array at the expense of a few more cycles in update_vsyscall(). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Huw Davies <huw@codeweavers.com> --- arch/x86/entry/vdso/vclock_gettime.c | 4 ++-- arch/x86/entry/vsyscall/vsyscall_gtod.c | 8 ++++++-- arch/x86/include/asm/vgtod.h | 6 +++--- 3 files changed, 11 insertions(+), 7 deletions(-) diff --git a/arch/x86/entry/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c index 007b3fe9d727..a4199b846d77 100644 --- a/arch/x86/entry/vdso/vclock_gettime.c +++ b/arch/x86/entry/vdso/vclock_gettime.c @@ -153,8 +153,8 @@ notrace static int do_hres(clockid_t clk, struct timespec *ts) if (unlikely((s64)cycles < 0)) return vdso_fallback_gettime(clk, ts); if (cycles > last) - ns += (cycles - last) * gtod->mult; - ns >>= gtod->shift; + ns += (cycles - last) * base->mult; + ns >>= base->shift; sec = base->sec; } while (unlikely(gtod_read_retry(gtod, seq))); diff --git a/arch/x86/entry/vsyscall/vsyscall_gtod.c b/arch/x86/entry/vsyscall/vsyscall_gtod.c index e4ee83018279..ddc6a71df87c 100644 --- a/arch/x86/entry/vsyscall/vsyscall_gtod.c +++ b/arch/x86/entry/vsyscall/vsyscall_gtod.c @@ -43,16 +43,18 @@ void update_vsyscall(struct timekeeper *tk) /* copy vsyscall data */ vdata->vclock_mode = vclock_mode; vdata->cycle_last = tk->tkr_mono.cycle_last; - vdata->mult = tk->tkr_mono.mult; - vdata->shift = tk->tkr_mono.shift; base = &vdata->basetime[CLOCK_REALTIME]; base->sec = tk->xtime_sec; base->nsec = tk->tkr_mono.xtime_nsec; + base->mult = tk->tkr_mono.mult; + base->shift = tk->tkr_mono.shift; base = &vdata->basetime[CLOCK_TAI]; base->sec = tk->xtime_sec + (s64)tk->tai_offset; base->nsec = tk->tkr_mono.xtime_nsec; + base->mult = tk->tkr_mono.mult; + base->shift = tk->tkr_mono.shift; base = &vdata->basetime[CLOCK_MONOTONIC]; base->sec = tk->xtime_sec + tk->wall_to_monotonic.tv_sec; @@ -63,6 +65,8 @@ void update_vsyscall(struct timekeeper *tk) base->sec++; } base->nsec = nsec; + base->mult = tk->tkr_mono.mult; + base->shift = tk->tkr_mono.shift; base = &vdata->basetime[CLOCK_REALTIME_COARSE]; base->sec = tk->xtime_sec; diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h index daf69a25e46b..ae0d76491595 100644 --- a/arch/x86/include/asm/vgtod.h +++ b/arch/x86/include/asm/vgtod.h @@ -20,11 +20,13 @@ typedef unsigned long gtod_long_t; * clocks, this encodes the actual time. * * To confuse the reader, for high-resolution clocks, nsec is left-shifted - * by vsyscall_gtod_data.shift. + * by shift. */ struct vgtod_ts { u64 sec; u64 nsec; + u32 mult; + u32 shift; }; #define VGTOD_BASES (CLOCK_TAI + 1) @@ -40,8 +42,6 @@ struct vsyscall_gtod_data { int vclock_mode; u64 cycle_last; - u32 mult; - u32 shift; struct vgtod_ts basetime[VGTOD_BASES]; -- 2.17.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values 2019-04-11 10:12 ` [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values Huw Davies @ 2019-04-14 10:53 ` Thomas Gleixner 2019-04-15 9:30 ` Huw Davies 0 siblings, 1 reply; 11+ messages in thread From: Thomas Gleixner @ 2019-04-14 10:53 UTC (permalink / raw) To: Huw Davies; +Cc: linux kernel, Andy Lutomirski, Vincenzo Frascino On Thu, 11 Apr 2019, Huw Davies wrote: CC+: Vincenzo Frascino who is working on the generic VDSO. > This will allow clocks with different mult and shift values, > e.g. CLOCK_MONOTONIC_RAW, to be supported in the vDSO. > > The coarse clocks do not require these data so the values are not > copied for these clocks. > > One could add potential new values of mult and shift alongside the > existing values in struct vsyscall_gtod_data, but it seems more > natural to group them with the actual clock data in the basetime array > at the expense of a few more cycles in update_vsyscall(). The few cycles are one thing. Did you verify that this does not change the cache layout for CLOCK_MONOTONIC and CLOCK_REALTIME? Let's look: > struct vgtod_ts { > u64 sec; > u64 nsec; > + u32 mult; > + u32 shift; > }; > > #define VGTOD_BASES (CLOCK_TAI + 1) > @@ -40,8 +42,6 @@ struct vsyscall_gtod_data { > > int vclock_mode; > u64 cycle_last; > - u32 mult; > - u32 shift; > > struct vgtod_ts basetime[VGTOD_BASES]; The current state is: struct vsyscall_gtod_data { unsigned int seq; /* 0 4 */ int vclock_mode; /* 4 4 */ u64 cycle_last; /* 8 8 */ u64 mask; /* 16 8 */ u32 mult; /* 24 4 */ u32 shift; /* 28 4 */ struct vgtod_ts basetime[12]; /* 32 192 */ basetime[CLOCK_REALTIME] 32 .. 47 basetime[CLOCK_MONOTONIC] 48 .. 63 So with your change it looks like this: struct vsyscall_gtod_data { unsigned int seq; /* 0 4 */ int vclock_mode; /* 4 4 */ u64 cycle_last; /* 8 8 */ struct vgtod_ts basetime[12]; /* 16 288 */ which makes basetime[CLOCK_REALTIME] 16 .. 39 basetime[CLOCK_MONOTONIC] 40 .. 63 So it stays in the same cache line, but as we move the VDSO to generic code, the mask field needs to stay and this will make basetime[CLOCK_MONOTONIC] overlap into the next cache line. See https://lkml.kernel.org/r/alpine.DEB.2.21.1902231727060.1666@nanos.tec.linutronix.de for an alternate solution to this problem, which avoids this and just gives CLOCK_MONOTONIC_RAW a separate storage space alltogether. Thanks, tglx ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values 2019-04-14 10:53 ` Thomas Gleixner @ 2019-04-15 9:30 ` Huw Davies 2019-04-15 9:51 ` Thomas Gleixner 0 siblings, 1 reply; 11+ messages in thread From: Huw Davies @ 2019-04-15 9:30 UTC (permalink / raw) To: Thomas Gleixner; +Cc: linux kernel, Andy Lutomirski, Vincenzo Frascino On Sun, Apr 14, 2019 at 12:53:32PM +0200, Thomas Gleixner wrote: > So it stays in the same cache line, but as we move the VDSO to generic > code, the mask field needs to stay and this will make basetime[CLOCK_MONOTONIC] > overlap into the next cache line. Thanks for the great review; this is a good point. > See https://lkml.kernel.org/r/alpine.DEB.2.21.1902231727060.1666@nanos.tec.linutronix.de > for an alternate solution to this problem, which avoids this and just gives > CLOCK_MONOTONIC_RAW a separate storage space alltogether. I can certainly do this for the x86 vdso. Would that be useful or should I wait for Vincenzo's work on the generic vdso first? Many thanks, Huw. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values 2019-04-15 9:30 ` Huw Davies @ 2019-04-15 9:51 ` Thomas Gleixner 2019-04-15 10:15 ` Vincenzo Frascino 0 siblings, 1 reply; 11+ messages in thread From: Thomas Gleixner @ 2019-04-15 9:51 UTC (permalink / raw) To: Huw Davies; +Cc: linux kernel, Andy Lutomirski, Vincenzo Frascino On Mon, 15 Apr 2019, Huw Davies wrote: > On Sun, Apr 14, 2019 at 12:53:32PM +0200, Thomas Gleixner wrote: > > So it stays in the same cache line, but as we move the VDSO to generic > > code, the mask field needs to stay and this will make basetime[CLOCK_MONOTONIC] > > overlap into the next cache line. > > Thanks for the great review; this is a good point. > > > See https://lkml.kernel.org/r/alpine.DEB.2.21.1902231727060.1666@nanos.tec.linutronix.de > > for an alternate solution to this problem, which avoids this and just gives > > CLOCK_MONOTONIC_RAW a separate storage space alltogether. > > I can certainly do this for the x86 vdso. Would that be useful or > should I wait for Vincenzo's work on the generic vdso first? Depends. If Vincenzo comes along with his new version soon, then you might get this for free :) Vincenzo, what's the state of your work? Thanks, tglx ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values 2019-04-15 9:51 ` Thomas Gleixner @ 2019-04-15 10:15 ` Vincenzo Frascino 2019-04-15 12:14 ` Huw Davies 0 siblings, 1 reply; 11+ messages in thread From: Vincenzo Frascino @ 2019-04-15 10:15 UTC (permalink / raw) To: Thomas Gleixner, Huw Davies; +Cc: linux kernel, Andy Lutomirski Hi Thomas, On 15/04/2019 10:51, Thomas Gleixner wrote: > On Mon, 15 Apr 2019, Huw Davies wrote: > >> On Sun, Apr 14, 2019 at 12:53:32PM +0200, Thomas Gleixner wrote: >>> So it stays in the same cache line, but as we move the VDSO to generic >>> code, the mask field needs to stay and this will make basetime[CLOCK_MONOTONIC] >>> overlap into the next cache line. >> >> Thanks for the great review; this is a good point. >> >>> See https://lkml.kernel.org/r/alpine.DEB.2.21.1902231727060.1666@nanos.tec.linutronix.de >>> for an alternate solution to this problem, which avoids this and just gives >>> CLOCK_MONOTONIC_RAW a separate storage space alltogether. >> >> I can certainly do this for the x86 vdso. Would that be useful or >> should I wait for Vincenzo's work on the generic vdso first? > > Depends. If Vincenzo comes along with his new version soon, then you might > get this for free :) > > Vincenzo, what's the state of your work? > I am mostly done with the development, the only thing missing is the integration of the generic update_vsyscall. After this is complete, I will need to do some testing and extract the performance numbers. Considering that I will be on Easter holiday from this Wednesday till the end of April, I think v6 will be ready around second week of May. > Thanks, > > tglx > -- Regards, Vincenzo ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values 2019-04-15 10:15 ` Vincenzo Frascino @ 2019-04-15 12:14 ` Huw Davies 2019-05-30 14:21 ` Vincenzo Frascino 0 siblings, 1 reply; 11+ messages in thread From: Huw Davies @ 2019-04-15 12:14 UTC (permalink / raw) To: Vincenzo Frascino; +Cc: Thomas Gleixner, linux kernel, Andy Lutomirski On Mon, Apr 15, 2019 at 11:15:56AM +0100, Vincenzo Frascino wrote: > On 15/04/2019 10:51, Thomas Gleixner wrote: > > On Mon, 15 Apr 2019, Huw Davies wrote: > >> On Sun, Apr 14, 2019 at 12:53:32PM +0200, Thomas Gleixner wrote: > >>> See https://lkml.kernel.org/r/alpine.DEB.2.21.1902231727060.1666@nanos.tec.linutronix.de > >>> for an alternate solution to this problem, which avoids this and just gives > >>> CLOCK_MONOTONIC_RAW a separate storage space alltogether. > >> > >> I can certainly do this for the x86 vdso. Would that be useful or > >> should I wait for Vincenzo's work on the generic vdso first? > > > > Depends. If Vincenzo comes along with his new version soon, then you might > > get this for free :) > > > > Vincenzo, what's the state of your work? > > > > I am mostly done with the development, the only thing missing is the integration > of the generic update_vsyscall. After this is complete, I will need to do some > testing and extract the performance numbers. > > Considering that I will be on Easter holiday from this Wednesday till the end of > April, I think v6 will be ready around second week of May. Hi Vincenzo, Great! In which case there's not much point in me changing the x86 vdso---it'll just end up making more work for you. Let me know if there's anything I can help with. Huw. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values 2019-04-15 12:14 ` Huw Davies @ 2019-05-30 14:21 ` Vincenzo Frascino 0 siblings, 0 replies; 11+ messages in thread From: Vincenzo Frascino @ 2019-05-30 14:21 UTC (permalink / raw) To: Huw Davies; +Cc: Thomas Gleixner, linux kernel, Andy Lutomirski Hi Huw, On 15/04/2019 13:14, Huw Davies wrote: > On Mon, Apr 15, 2019 at 11:15:56AM +0100, Vincenzo Frascino wrote: >> On 15/04/2019 10:51, Thomas Gleixner wrote: >>> On Mon, 15 Apr 2019, Huw Davies wrote: >>>> On Sun, Apr 14, 2019 at 12:53:32PM +0200, Thomas Gleixner wrote: >>>>> See https://lkml.kernel.org/r/alpine.DEB.2.21.1902231727060.1666@nanos.tec.linutronix.de >>>>> for an alternate solution to this problem, which avoids this and just gives >>>>> CLOCK_MONOTONIC_RAW a separate storage space alltogether. >>>> >>>> I can certainly do this for the x86 vdso. Would that be useful or >>>> should I wait for Vincenzo's work on the generic vdso first? >>> >>> Depends. If Vincenzo comes along with his new version soon, then you might >>> get this for free :) >>> >>> Vincenzo, what's the state of your work? >>> >> >> I am mostly done with the development, the only thing missing is the integration >> of the generic update_vsyscall. After this is complete, I will need to do some >> testing and extract the performance numbers. >> >> Considering that I will be on Easter holiday from this Wednesday till the end of >> April, I think v6 will be ready around second week of May. > > Hi Vincenzo, > > Great! In which case there's not much point in me changing the x86 > vdso---it'll just end up making more work for you. > > Let me know if there's anything I can help with. > I wanted to let you know that I just posted my updated patchset for unifying vdso. I should have tested it enough (I hope :) ), but if your help offer is still valid, and you want to give it a go, you are more than welcome. Please let me know if you find any issue. > Huw. > -- Regards, Vincenzo ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 3/3] x86/vdso: Add support for CLOCK_MONOTONIC_RAW in the vDSO 2019-04-11 10:12 [PATCH 0/3] x86/vdso: Add support for CLOCK_MONOTONIC_RAW in the vDSO Huw Davies 2019-04-11 10:12 ` [PATCH 1/3] x86/vdso: Remove unused 'mask' member Huw Davies 2019-04-11 10:12 ` [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values Huw Davies @ 2019-04-11 10:12 ` Huw Davies 2 siblings, 0 replies; 11+ messages in thread From: Huw Davies @ 2019-04-11 10:12 UTC (permalink / raw) To: linux kernel; +Cc: Thomas Gleixner, Andy Lutomirski This is particularly useful for Wine which needs to implement Win32 API clock functions whose values do not get adjusted by adjtimex(). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Huw Davies <huw@codeweavers.com> --- arch/x86/entry/vsyscall/vsyscall_gtod.c | 6 ++++++ arch/x86/include/asm/vgtod.h | 3 ++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/x86/entry/vsyscall/vsyscall_gtod.c b/arch/x86/entry/vsyscall/vsyscall_gtod.c index ddc6a71df87c..fe3458caf301 100644 --- a/arch/x86/entry/vsyscall/vsyscall_gtod.c +++ b/arch/x86/entry/vsyscall/vsyscall_gtod.c @@ -68,6 +68,12 @@ void update_vsyscall(struct timekeeper *tk) base->mult = tk->tkr_mono.mult; base->shift = tk->tkr_mono.shift; + base = &vdata->basetime[CLOCK_MONOTONIC_RAW]; + base->sec = tk->raw_sec; + base->nsec = tk->tkr_raw.xtime_nsec; + base->mult = tk->tkr_raw.mult; + base->shift = tk->tkr_raw.shift; + base = &vdata->basetime[CLOCK_REALTIME_COARSE]; base->sec = tk->xtime_sec; base->nsec = tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift; diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h index ae0d76491595..0b76ba884e25 100644 --- a/arch/x86/include/asm/vgtod.h +++ b/arch/x86/include/asm/vgtod.h @@ -30,7 +30,8 @@ struct vgtod_ts { }; #define VGTOD_BASES (CLOCK_TAI + 1) -#define VGTOD_HRES (BIT(CLOCK_REALTIME) | BIT(CLOCK_MONOTONIC) | BIT(CLOCK_TAI)) +#define VGTOD_HRES (BIT(CLOCK_REALTIME) | BIT(CLOCK_MONOTONIC) | \ + BIT(CLOCK_MONOTONIC_RAW) | BIT(CLOCK_TAI)) #define VGTOD_COARSE (BIT(CLOCK_REALTIME_COARSE) | BIT(CLOCK_MONOTONIC_COARSE)) /* -- 2.17.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-05-30 14:21 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-04-11 10:12 [PATCH 0/3] x86/vdso: Add support for CLOCK_MONOTONIC_RAW in the vDSO Huw Davies 2019-04-11 10:12 ` [PATCH 1/3] x86/vdso: Remove unused 'mask' member Huw Davies 2019-04-14 10:36 ` Thomas Gleixner 2019-04-11 10:12 ` [PATCH 2/3] x86/vdso: Allow clock specific mult and shift values Huw Davies 2019-04-14 10:53 ` Thomas Gleixner 2019-04-15 9:30 ` Huw Davies 2019-04-15 9:51 ` Thomas Gleixner 2019-04-15 10:15 ` Vincenzo Frascino 2019-04-15 12:14 ` Huw Davies 2019-05-30 14:21 ` Vincenzo Frascino 2019-04-11 10:12 ` [PATCH 3/3] x86/vdso: Add support for CLOCK_MONOTONIC_RAW in the vDSO Huw Davies
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).