* [PATCH 1/8] dt-bindings: arm: atmel: add missing samx7 to reset controller
2019-01-16 9:57 [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas Ferre
@ 2019-01-16 9:57 ` Nicolas Ferre
2019-01-22 1:05 ` Rob Herring
2019-01-16 9:57 ` [PATCH 2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding Nicolas Ferre
` (7 subsequent siblings)
8 siblings, 1 reply; 21+ messages in thread
From: Nicolas Ferre @ 2019-01-16 9:57 UTC (permalink / raw)
To: Alexandre Belloni, Ludovic Desroches
Cc: linux-kernel, linux-arm-kernel, Sebastian Reichel, linux-pm,
netdev, David S . Miller, linux-usb, Alan Stern,
Greg Kroah-Hartman, Rob Herring, devicetree, Nicolas Ferre
Add this missing compatibility string to the Reset Controller
compatible string chip list.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 14f319f694b7..36952cc39993 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -21,7 +21,7 @@ Its subnodes can be:
RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
- <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
+ <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
- reg: Should contain registers location and length
- clocks: phandle to input clock.
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH 1/8] dt-bindings: arm: atmel: add missing samx7 to reset controller
2019-01-16 9:57 ` [PATCH 1/8] dt-bindings: arm: atmel: add missing samx7 to reset controller Nicolas Ferre
@ 2019-01-22 1:05 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2019-01-22 1:05 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Alexandre Belloni, Ludovic Desroches, linux-kernel,
linux-arm-kernel, Sebastian Reichel, linux-pm, netdev,
David S . Miller, linux-usb, Alan Stern, Greg Kroah-Hartman,
Rob Herring, devicetree, Nicolas Ferre
On Wed, 16 Jan 2019 10:57:37 +0100, Nicolas Ferre wrote:
> Add this missing compatibility string to the Reset Controller
> compatible string chip list.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> ---
> Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding
2019-01-16 9:57 [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas Ferre
2019-01-16 9:57 ` [PATCH 1/8] dt-bindings: arm: atmel: add missing samx7 to reset controller Nicolas Ferre
@ 2019-01-16 9:57 ` Nicolas Ferre
2019-01-22 1:07 ` Rob Herring
2019-01-16 9:57 ` [PATCH 3/8] dt-bindings: arm: atmel: add new sam9x60 SFR binding Nicolas Ferre
` (6 subsequent siblings)
8 siblings, 1 reply; 21+ messages in thread
From: Nicolas Ferre @ 2019-01-16 9:57 UTC (permalink / raw)
To: Alexandre Belloni, Ludovic Desroches
Cc: linux-kernel, linux-arm-kernel, Sebastian Reichel, linux-pm,
netdev, David S . Miller, linux-usb, Alan Stern,
Greg Kroah-Hartman, Rob Herring, devicetree, Nicolas Ferre
Update the Reset Controller's binding to add new SoC compatibility string.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 36952cc39993..badce6ef3ab3 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -22,6 +22,7 @@ Its subnodes can be:
RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
<chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
+ it also can be "microchip,sam9x60-rstc"
- reg: Should contain registers location and length
- clocks: phandle to input clock.
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH 2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding
2019-01-16 9:57 ` [PATCH 2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding Nicolas Ferre
@ 2019-01-22 1:07 ` Rob Herring
2019-01-22 9:00 ` Nicolas.Ferre
0 siblings, 1 reply; 21+ messages in thread
From: Rob Herring @ 2019-01-22 1:07 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Alexandre Belloni, Ludovic Desroches, linux-kernel,
linux-arm-kernel, Sebastian Reichel, linux-pm, netdev,
David S . Miller, linux-usb, Alan Stern, Greg Kroah-Hartman,
devicetree
On Wed, Jan 16, 2019 at 10:57:38AM +0100, Nicolas Ferre wrote:
> Update the Reset Controller's binding to add new SoC compatibility string.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> ---
> Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index 36952cc39993..badce6ef3ab3 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -22,6 +22,7 @@ Its subnodes can be:
> RSTC Reset Controller required properties:
> - compatible: Should be "atmel,<chip>-rstc".
> <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
> + it also can be "microchip,sam9x60-rstc"
How is this related to at91sam9260-rstc?
The 'x' is a wildcard? We generally avoid wildcards.
> - reg: Should contain registers location and length
> - clocks: phandle to input clock.
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding
2019-01-22 1:07 ` Rob Herring
@ 2019-01-22 9:00 ` Nicolas.Ferre
2019-01-22 13:40 ` Rob Herring
0 siblings, 1 reply; 21+ messages in thread
From: Nicolas.Ferre @ 2019-01-22 9:00 UTC (permalink / raw)
To: robh
Cc: alexandre.belloni, Ludovic.Desroches, linux-kernel,
linux-arm-kernel, sre, linux-pm, netdev, davem, linux-usb, stern,
gregkh, devicetree
Hi Rob,
On 22/01/2019 at 02:07, Rob Herring wrote:
> On Wed, Jan 16, 2019 at 10:57:38AM +0100, Nicolas Ferre wrote:
>> Update the Reset Controller's binding to add new SoC compatibility string.
>>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>> ---
>> Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
>> index 36952cc39993..badce6ef3ab3 100644
>> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
>> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
>> @@ -22,6 +22,7 @@ Its subnodes can be:
>> RSTC Reset Controller required properties:
>> - compatible: Should be "atmel,<chip>-rstc".
>> <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
>> + it also can be "microchip,sam9x60-rstc"
>
> How is this related to at91sam9260-rstc?
at91sam9260 and sam9x60 are completely different products (they share
the same core though...). I know the naming could be misleading but it
is like it is...
> The 'x' is a wildcard? We generally avoid wildcards.
Here, the 'x' is definitively not a wildcard nor a kind of "family"
name, it's included in the (upcoming) single product's name.
I hope it clarifies.
Best regards,
Nicolas
>> - reg: Should contain registers location and length
>> - clocks: phandle to input clock.
>>
>> --
>> 2.17.1
>>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding
2019-01-22 9:00 ` Nicolas.Ferre
@ 2019-01-22 13:40 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2019-01-22 13:40 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Alexandre Belloni, Ludovic Desroches, linux-kernel,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Sebastian Reichel, open list:THERMAL, netdev, David Miller,
Linux USB List, Alan Stern, Greg Kroah-Hartman, devicetree
On Tue, Jan 22, 2019 at 3:00 AM <Nicolas.Ferre@microchip.com> wrote:
>
> Hi Rob,
>
> On 22/01/2019 at 02:07, Rob Herring wrote:
> > On Wed, Jan 16, 2019 at 10:57:38AM +0100, Nicolas Ferre wrote:
> >> Update the Reset Controller's binding to add new SoC compatibility string.
> >>
> >> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> >> ---
> >> Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 1 +
> >> 1 file changed, 1 insertion(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> >> index 36952cc39993..badce6ef3ab3 100644
> >> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> >> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> >> @@ -22,6 +22,7 @@ Its subnodes can be:
> >> RSTC Reset Controller required properties:
> >> - compatible: Should be "atmel,<chip>-rstc".
> >> <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
> >> + it also can be "microchip,sam9x60-rstc"
> >
> > How is this related to at91sam9260-rstc?
>
> at91sam9260 and sam9x60 are completely different products (they share
> the same core though...). I know the naming could be misleading but it
> is like it is...
>
> > The 'x' is a wildcard? We generally avoid wildcards.
>
> Here, the 'x' is definitively not a wildcard nor a kind of "family"
> name, it's included in the (upcoming) single product's name.
>
> I hope it clarifies.
Yes, thanks.
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 3/8] dt-bindings: arm: atmel: add new sam9x60 SFR binding
2019-01-16 9:57 [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas Ferre
2019-01-16 9:57 ` [PATCH 1/8] dt-bindings: arm: atmel: add missing samx7 to reset controller Nicolas Ferre
2019-01-16 9:57 ` [PATCH 2/8] dt-bindings: arm: atmel: add new sam9x60 reset controller binding Nicolas Ferre
@ 2019-01-16 9:57 ` Nicolas Ferre
2019-01-16 9:57 ` [PATCH 4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface Nicolas Ferre
` (5 subsequent siblings)
8 siblings, 0 replies; 21+ messages in thread
From: Nicolas Ferre @ 2019-01-16 9:57 UTC (permalink / raw)
To: Alexandre Belloni, Ludovic Desroches
Cc: linux-kernel, linux-arm-kernel, Sebastian Reichel, linux-pm,
netdev, David S . Miller, linux-usb, Alan Stern,
Greg Kroah-Hartman, Rob Herring, devicetree, Nicolas Ferre
Add this SFR compatible definition for the sam9x60 SoC. Will be needed
in OHCI driver: ohci-at91.c.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index badce6ef3ab3..dfc91bc02b97 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -148,6 +148,7 @@ required properties:
- compatible: Should be "atmel,<chip>-sfr", "syscon" or
"atmel,<chip>-sfrbu", "syscon"
<chip> can be "sama5d3", "sama5d4" or "sama5d2".
+ it also can be "microchip,sam9x60-sfr", "syscon".
- reg: Should contain registers location and length
sfr@f0038000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH 4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
2019-01-16 9:57 [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas Ferre
` (2 preceding siblings ...)
2019-01-16 9:57 ` [PATCH 3/8] dt-bindings: arm: atmel: add new sam9x60 SFR binding Nicolas Ferre
@ 2019-01-16 9:57 ` Nicolas Ferre
2019-01-22 1:10 ` Rob Herring
2019-01-16 9:57 ` [PATCH 5/8] net/macb: bindings doc: add sam9x60 binding Nicolas Ferre
` (4 subsequent siblings)
8 siblings, 1 reply; 21+ messages in thread
From: Nicolas Ferre @ 2019-01-16 9:57 UTC (permalink / raw)
To: Alexandre Belloni, Ludovic Desroches
Cc: linux-kernel, linux-arm-kernel, Sebastian Reichel, linux-pm,
netdev, David S . Miller, linux-usb, Alan Stern,
Greg Kroah-Hartman, Rob Herring, devicetree, Nicolas Ferre
This removes a line left while adding the correct compatibility string for
sama5d3 10/100 interface. Now use the "atmel,sama5d3-macb" string.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
Documentation/devicetree/bindings/net/macb.txt | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 3e17ac1d5d58..f5c414b10e27 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -3,8 +3,7 @@
Required properties:
- compatible: Should be "cdns,[<chip>-]{macb|gem}"
Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
- Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
- available on sama5d3 SoCs.
+ Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
Use "cdns,np4-macb" for NP4 SoC devices.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH 4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
2019-01-16 9:57 ` [PATCH 4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface Nicolas Ferre
@ 2019-01-22 1:10 ` Rob Herring
2019-01-22 9:08 ` Nicolas.Ferre
0 siblings, 1 reply; 21+ messages in thread
From: Rob Herring @ 2019-01-22 1:10 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Alexandre Belloni, Ludovic Desroches, linux-kernel,
linux-arm-kernel, Sebastian Reichel, linux-pm, netdev,
David S . Miller, linux-usb, Alan Stern, Greg Kroah-Hartman,
devicetree
On Wed, Jan 16, 2019 at 10:57:40AM +0100, Nicolas Ferre wrote:
> This removes a line left while adding the correct compatibility string for
> sama5d3 10/100 interface. Now use the "atmel,sama5d3-macb" string.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> ---
> Documentation/devicetree/bindings/net/macb.txt | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
> index 3e17ac1d5d58..f5c414b10e27 100644
> --- a/Documentation/devicetree/bindings/net/macb.txt
> +++ b/Documentation/devicetree/bindings/net/macb.txt
> @@ -3,8 +3,7 @@
> Required properties:
> - compatible: Should be "cdns,[<chip>-]{macb|gem}"
> Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
> - Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
> - available on sama5d3 SoCs.
> + Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
Where is "atmel,sama5d3-macb"?
> Use "cdns,np4-macb" for NP4 SoC devices.
> Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
> Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
2019-01-22 1:10 ` Rob Herring
@ 2019-01-22 9:08 ` Nicolas.Ferre
2019-01-22 13:41 ` Rob Herring
0 siblings, 1 reply; 21+ messages in thread
From: Nicolas.Ferre @ 2019-01-22 9:08 UTC (permalink / raw)
To: robh, alexandre.belloni
Cc: Ludovic.Desroches, linux-kernel, linux-arm-kernel, sre, linux-pm,
netdev, davem, linux-usb, stern, gregkh, devicetree
Hi Rob,
On 22/01/2019 at 02:10, Rob Herring wrote:
> On Wed, Jan 16, 2019 at 10:57:40AM +0100, Nicolas Ferre wrote:
>> This removes a line left while adding the correct compatibility string for
>> sama5d3 10/100 interface. Now use the "atmel,sama5d3-macb" string.
>>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>> ---
>> Documentation/devicetree/bindings/net/macb.txt | 3 +--
>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
>> index 3e17ac1d5d58..f5c414b10e27 100644
>> --- a/Documentation/devicetree/bindings/net/macb.txt
>> +++ b/Documentation/devicetree/bindings/net/macb.txt
>> @@ -3,8 +3,7 @@
>> Required properties:
>> - compatible: Should be "cdns,[<chip>-]{macb|gem}"
>> Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
>> - Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
>> - available on sama5d3 SoCs.
>> + Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
>
> Where is "atmel,sama5d3-macb"?
It's actually a couple of line below: line 13 of the resulting macb.txt
file. It was already in the file when I removed the leftovers.
Do you advice to try to better sort entries in this file? Is there a
common pattern?
Best regards,
Nicolas
>> Use "cdns,np4-macb" for NP4 SoC devices.
>> Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
>> Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
>> --
>> 2.17.1
>>
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
2019-01-22 9:08 ` Nicolas.Ferre
@ 2019-01-22 13:41 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2019-01-22 13:41 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Alexandre Belloni, Ludovic Desroches, linux-kernel,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Sebastian Reichel, open list:THERMAL, netdev, David Miller,
Linux USB List, Alan Stern, Greg Kroah-Hartman, devicetree
On Tue, Jan 22, 2019 at 3:09 AM <Nicolas.Ferre@microchip.com> wrote:
>
> Hi Rob,
>
> On 22/01/2019 at 02:10, Rob Herring wrote:
> > On Wed, Jan 16, 2019 at 10:57:40AM +0100, Nicolas Ferre wrote:
> >> This removes a line left while adding the correct compatibility string for
> >> sama5d3 10/100 interface. Now use the "atmel,sama5d3-macb" string.
> >>
> >> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> >> ---
> >> Documentation/devicetree/bindings/net/macb.txt | 3 +--
> >> 1 file changed, 1 insertion(+), 2 deletions(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
> >> index 3e17ac1d5d58..f5c414b10e27 100644
> >> --- a/Documentation/devicetree/bindings/net/macb.txt
> >> +++ b/Documentation/devicetree/bindings/net/macb.txt
> >> @@ -3,8 +3,7 @@
> >> Required properties:
> >> - compatible: Should be "cdns,[<chip>-]{macb|gem}"
> >> Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
> >> - Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
> >> - available on sama5d3 SoCs.
> >> + Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
> >
> > Where is "atmel,sama5d3-macb"?
>
> It's actually a couple of line below: line 13 of the resulting macb.txt
> file. It was already in the file when I removed the leftovers.
>
> Do you advice to try to better sort entries in this file? Is there a
> common pattern?
Okay, it's fine.
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 5/8] net/macb: bindings doc: add sam9x60 binding
2019-01-16 9:57 [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas Ferre
` (3 preceding siblings ...)
2019-01-16 9:57 ` [PATCH 4/8] net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface Nicolas Ferre
@ 2019-01-16 9:57 ` Nicolas Ferre
2019-01-16 9:57 ` [PATCH 6/8] power: reset: at91-reset: add support for sam9x60 SoC Nicolas Ferre
` (3 subsequent siblings)
8 siblings, 0 replies; 21+ messages in thread
From: Nicolas Ferre @ 2019-01-16 9:57 UTC (permalink / raw)
To: Alexandre Belloni, Ludovic Desroches
Cc: linux-kernel, linux-arm-kernel, Sebastian Reichel, linux-pm,
netdev, David S . Miller, linux-usb, Alan Stern,
Greg Kroah-Hartman, Rob Herring, devicetree, Nicolas Ferre
Add the compatibility sting documentation for sam9x60 10/100 interface.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
Documentation/devicetree/bindings/net/macb.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index f5c414b10e27..174f292d8a3e 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Should be "cdns,[<chip>-]{macb|gem}"
Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
+ Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC.
Use "cdns,np4-macb" for NP4 SoC devices.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH 6/8] power: reset: at91-reset: add support for sam9x60 SoC
2019-01-16 9:57 [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas Ferre
` (4 preceding siblings ...)
2019-01-16 9:57 ` [PATCH 5/8] net/macb: bindings doc: add sam9x60 binding Nicolas Ferre
@ 2019-01-16 9:57 ` Nicolas Ferre
2019-01-23 18:34 ` Sebastian Reichel
2019-01-16 9:57 ` [PATCH 7/8] USB: host: ohci-at91: add sam9x60-sfr definition for ohci Nicolas Ferre
` (2 subsequent siblings)
8 siblings, 1 reply; 21+ messages in thread
From: Nicolas Ferre @ 2019-01-16 9:57 UTC (permalink / raw)
To: Alexandre Belloni, Ludovic Desroches
Cc: linux-kernel, linux-arm-kernel, Sebastian Reichel, linux-pm,
netdev, David S . Miller, linux-usb, Alan Stern,
Greg Kroah-Hartman, Rob Herring, devicetree, Nicolas Ferre
Add support for additional reset causes and the proper compatibility
string for sam9x60 SoC. The restart function is the same as the samx7.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
drivers/power/reset/at91-reset.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index f44a9ffcc2ab..44ca983a49a1 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -44,6 +44,9 @@ enum reset_type {
RESET_TYPE_WATCHDOG = 2,
RESET_TYPE_SOFTWARE = 3,
RESET_TYPE_USER = 4,
+ RESET_TYPE_CPU_FAIL = 6,
+ RESET_TYPE_XTAL_FAIL = 7,
+ RESET_TYPE_ULP2 = 8,
};
static void __iomem *at91_ramc_base[2], *at91_rstc_base;
@@ -164,6 +167,15 @@ static void __init at91_reset_status(struct platform_device *pdev)
case RESET_TYPE_USER:
reason = "user reset";
break;
+ case RESET_TYPE_CPU_FAIL:
+ reason = "CPU clock failure detection";
+ break;
+ case RESET_TYPE_XTAL_FAIL:
+ reason = "32.768 kHz crystal failure detection";
+ break;
+ case RESET_TYPE_ULP2:
+ reason = "ULP2 reset";
+ break;
default:
reason = "unknown reset";
break;
@@ -183,6 +195,7 @@ static const struct of_device_id at91_reset_of_match[] = {
{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
{ .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart },
{ .compatible = "atmel,samx7-rstc", .data = samx7_restart },
+ { .compatible = "microchip,sam9x60-rstc", .data = samx7_restart },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, at91_reset_of_match);
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH 6/8] power: reset: at91-reset: add support for sam9x60 SoC
2019-01-16 9:57 ` [PATCH 6/8] power: reset: at91-reset: add support for sam9x60 SoC Nicolas Ferre
@ 2019-01-23 18:34 ` Sebastian Reichel
2019-01-24 10:34 ` Nicolas.Ferre
0 siblings, 1 reply; 21+ messages in thread
From: Sebastian Reichel @ 2019-01-23 18:34 UTC (permalink / raw)
To: Nicolas Ferre
Cc: Alexandre Belloni, Ludovic Desroches, linux-kernel,
linux-arm-kernel, linux-pm, netdev, David S . Miller, linux-usb,
Alan Stern, Greg Kroah-Hartman, Rob Herring, devicetree
[-- Attachment #1: Type: text/plain, Size: 1984 bytes --]
Hi,
On Wed, Jan 16, 2019 at 10:57:42AM +0100, Nicolas Ferre wrote:
> Add support for additional reset causes and the proper compatibility
> string for sam9x60 SoC. The restart function is the same as the samx7.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> ---
> drivers/power/reset/at91-reset.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
> index f44a9ffcc2ab..44ca983a49a1 100644
> --- a/drivers/power/reset/at91-reset.c
> +++ b/drivers/power/reset/at91-reset.c
> @@ -44,6 +44,9 @@ enum reset_type {
> RESET_TYPE_WATCHDOG = 2,
> RESET_TYPE_SOFTWARE = 3,
> RESET_TYPE_USER = 4,
> + RESET_TYPE_CPU_FAIL = 6,
> + RESET_TYPE_XTAL_FAIL = 7,
> + RESET_TYPE_ULP2 = 8,
what happened to 5? :)
> };
>
> static void __iomem *at91_ramc_base[2], *at91_rstc_base;
> @@ -164,6 +167,15 @@ static void __init at91_reset_status(struct platform_device *pdev)
> case RESET_TYPE_USER:
> reason = "user reset";
> break;
> + case RESET_TYPE_CPU_FAIL:
> + reason = "CPU clock failure detection";
> + break;
> + case RESET_TYPE_XTAL_FAIL:
> + reason = "32.768 kHz crystal failure detection";
> + break;
> + case RESET_TYPE_ULP2:
> + reason = "ULP2 reset";
> + break;
> default:
> reason = "unknown reset";
> break;
> @@ -183,6 +195,7 @@ static const struct of_device_id at91_reset_of_match[] = {
> { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
> { .compatible = "atmel,sama5d3-rstc", .data = sama5d3_restart },
> { .compatible = "atmel,samx7-rstc", .data = samx7_restart },
> + { .compatible = "microchip,sam9x60-rstc", .data = samx7_restart },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, at91_reset_of_match);
Patch looks fine to me. But I will wait a bit with merging, so that
Alexandre or Ludovic have a chance to provide feedback.
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 6/8] power: reset: at91-reset: add support for sam9x60 SoC
2019-01-23 18:34 ` Sebastian Reichel
@ 2019-01-24 10:34 ` Nicolas.Ferre
2019-01-24 17:11 ` Sebastian Reichel
0 siblings, 1 reply; 21+ messages in thread
From: Nicolas.Ferre @ 2019-01-24 10:34 UTC (permalink / raw)
To: sre
Cc: alexandre.belloni, Ludovic.Desroches, linux-kernel,
linux-arm-kernel, linux-pm, netdev, davem, linux-usb, stern,
gregkh, robh+dt, devicetree
Hi Sebastian,
On 23/01/2019 at 19:34, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Jan 16, 2019 at 10:57:42AM +0100, Nicolas Ferre wrote:
>> Add support for additional reset causes and the proper compatibility
>> string for sam9x60 SoC. The restart function is the same as the samx7.
>>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>> ---
>> drivers/power/reset/at91-reset.c | 13 +++++++++++++
>> 1 file changed, 13 insertions(+)
>>
>> diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
>> index f44a9ffcc2ab..44ca983a49a1 100644
>> --- a/drivers/power/reset/at91-reset.c
>> +++ b/drivers/power/reset/at91-reset.c
>> @@ -44,6 +44,9 @@ enum reset_type {
>> RESET_TYPE_WATCHDOG = 2,
>> RESET_TYPE_SOFTWARE = 3,
>> RESET_TYPE_USER = 4,
>> + RESET_TYPE_CPU_FAIL = 6,
>> + RESET_TYPE_XTAL_FAIL = 7,
>> + RESET_TYPE_ULP2 = 8,
>
> what happened to 5? :)
That a good question ;-)
It's marked as "Reserved"... which opens up a whole new field of
speculation :-)
[..]
>> { .compatible = "atmel,samx7-rstc", .data = samx7_restart },
>> + { .compatible = "microchip,sam9x60-rstc", .data = samx7_restart },
>> { /* sentinel */ }
>> };
>> MODULE_DEVICE_TABLE(of, at91_reset_of_match);
>
> Patch looks fine to me. But I will wait a bit with merging, so that
> Alexandre or Ludovic have a chance to provide feedback.
What about merging this patch with the whole series through the at91
then arm-soc trees?
Best regards,
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 6/8] power: reset: at91-reset: add support for sam9x60 SoC
2019-01-24 10:34 ` Nicolas.Ferre
@ 2019-01-24 17:11 ` Sebastian Reichel
0 siblings, 0 replies; 21+ messages in thread
From: Sebastian Reichel @ 2019-01-24 17:11 UTC (permalink / raw)
To: Nicolas.Ferre
Cc: alexandre.belloni, Ludovic.Desroches, linux-kernel,
linux-arm-kernel, linux-pm, netdev, davem, linux-usb, stern,
gregkh, robh+dt, devicetree
[-- Attachment #1: Type: text/plain, Size: 1891 bytes --]
Hi,
On Thu, Jan 24, 2019 at 10:34:50AM +0000, Nicolas.Ferre@microchip.com wrote:
> Hi Sebastian,
>
> On 23/01/2019 at 19:34, Sebastian Reichel wrote:
> > Hi,
> >
> > On Wed, Jan 16, 2019 at 10:57:42AM +0100, Nicolas Ferre wrote:
> >> Add support for additional reset causes and the proper compatibility
> >> string for sam9x60 SoC. The restart function is the same as the samx7.
> >>
> >> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> >> ---
> >> drivers/power/reset/at91-reset.c | 13 +++++++++++++
> >> 1 file changed, 13 insertions(+)
> >>
> >> diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
> >> index f44a9ffcc2ab..44ca983a49a1 100644
> >> --- a/drivers/power/reset/at91-reset.c
> >> +++ b/drivers/power/reset/at91-reset.c
> >> @@ -44,6 +44,9 @@ enum reset_type {
> >> RESET_TYPE_WATCHDOG = 2,
> >> RESET_TYPE_SOFTWARE = 3,
> >> RESET_TYPE_USER = 4,
> >> + RESET_TYPE_CPU_FAIL = 6,
> >> + RESET_TYPE_XTAL_FAIL = 7,
> >> + RESET_TYPE_ULP2 = 8,
> >
> > what happened to 5? :)
>
> That a good question ;-)
>
> It's marked as "Reserved"... which opens up a whole new field of
> speculation :-)
Ok :)
> [..]
>
> >> { .compatible = "atmel,samx7-rstc", .data = samx7_restart },
> >> + { .compatible = "microchip,sam9x60-rstc", .data = samx7_restart },
> >> { /* sentinel */ }
> >> };
> >> MODULE_DEVICE_TABLE(of, at91_reset_of_match);
> >
> > Patch looks fine to me. But I will wait a bit with merging, so that
> > Alexandre or Ludovic have a chance to provide feedback.
>
> What about merging this patch with the whole series through the at91
> then arm-soc trees?
It seems to be possible to merge this standalone, but merging
through at91/arm-soc is also fine with me.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH 7/8] USB: host: ohci-at91: add sam9x60-sfr definition for ohci
2019-01-16 9:57 [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas Ferre
` (5 preceding siblings ...)
2019-01-16 9:57 ` [PATCH 6/8] power: reset: at91-reset: add support for sam9x60 SoC Nicolas Ferre
@ 2019-01-16 9:57 ` Nicolas Ferre
2019-01-16 9:57 ` [PATCH 8/8] net: macb: add sam9x60-macb compatibility string Nicolas Ferre
2019-02-06 17:51 ` [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas.Ferre
8 siblings, 0 replies; 21+ messages in thread
From: Nicolas Ferre @ 2019-01-16 9:57 UTC (permalink / raw)
To: Alexandre Belloni, Ludovic Desroches
Cc: linux-kernel, linux-arm-kernel, Sebastian Reichel, linux-pm,
netdev, David S . Miller, linux-usb, Alan Stern,
Greg Kroah-Hartman, Rob Herring, devicetree, Nicolas Ferre
Add this SFR compatible definition for the sam9x60 SoC and manage
its use in ohci-at91.c driver.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
drivers/usb/host/ohci-at91.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index ec6739ef3129..fc35a7993b7b 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -141,8 +141,11 @@ static struct regmap *at91_dt_syscon_sfr(void)
struct regmap *regmap;
regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
- if (IS_ERR(regmap))
- regmap = NULL;
+ if (IS_ERR(regmap)) {
+ regmap = syscon_regmap_lookup_by_compatible("microchip,sam9x60-sfr");
+ if (IS_ERR(regmap))
+ regmap = NULL;
+ }
return regmap;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH 8/8] net: macb: add sam9x60-macb compatibility string
2019-01-16 9:57 [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas Ferre
` (6 preceding siblings ...)
2019-01-16 9:57 ` [PATCH 7/8] USB: host: ohci-at91: add sam9x60-sfr definition for ohci Nicolas Ferre
@ 2019-01-16 9:57 ` Nicolas Ferre
2019-01-25 9:16 ` Nicolas.Ferre
2019-02-06 17:51 ` [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas.Ferre
8 siblings, 1 reply; 21+ messages in thread
From: Nicolas Ferre @ 2019-01-16 9:57 UTC (permalink / raw)
To: Alexandre Belloni, Ludovic Desroches
Cc: linux-kernel, linux-arm-kernel, Sebastian Reichel, linux-pm,
netdev, David S . Miller, linux-usb, Alan Stern,
Greg Kroah-Hartman, Rob Herring, devicetree, Nicolas Ferre
Add a new compatibility string for this product. It's using
at91sam9260-macb layout but has a newer hardware revision: it's safer
to use its own string.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
drivers/net/ethernet/cadence/macb_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 66cc7927061a..a0889ef107a1 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -3941,6 +3941,7 @@ static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "cdns,np4-macb", .data = &np4_config },
{ .compatible = "cdns,pc302-gem", .data = &pc302gem_config },
{ .compatible = "cdns,gem", .data = &pc302gem_config },
+ { .compatible = "cdns,sam9x60-macb", .data = &at91sam9260_config },
{ .compatible = "atmel,sama5d2-gem", .data = &sama5d2_config },
{ .compatible = "atmel,sama5d3-gem", .data = &sama5d3_config },
{ .compatible = "atmel,sama5d3-macb", .data = &sama5d3macb_config },
--
2.17.1
^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH 8/8] net: macb: add sam9x60-macb compatibility string
2019-01-16 9:57 ` [PATCH 8/8] net: macb: add sam9x60-macb compatibility string Nicolas Ferre
@ 2019-01-25 9:16 ` Nicolas.Ferre
0 siblings, 0 replies; 21+ messages in thread
From: Nicolas.Ferre @ 2019-01-25 9:16 UTC (permalink / raw)
To: netdev, davem
Cc: alexandre.belloni, Ludovic.Desroches, linux-kernel,
linux-arm-kernel, sre, linux-pm, linux-usb, stern, gregkh,
robh+dt, devicetree
Hi David,
On 16/01/2019 at 10:57, Nicolas Ferre wrote:
> Add a new compatibility string for this product. It's using
> at91sam9260-macb layout but has a newer hardware revision: it's safer
> to use its own string.
>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
I'm thinking of pushing this patch with the others of the series through
arm-soc tree. Can I have your "Acked-by" tag then?
Best regards,
Nicolas
> ---
> drivers/net/ethernet/cadence/macb_main.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index 66cc7927061a..a0889ef107a1 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -3941,6 +3941,7 @@ static const struct of_device_id macb_dt_ids[] = {
> { .compatible = "cdns,np4-macb", .data = &np4_config },
> { .compatible = "cdns,pc302-gem", .data = &pc302gem_config },
> { .compatible = "cdns,gem", .data = &pc302gem_config },
> + { .compatible = "cdns,sam9x60-macb", .data = &at91sam9260_config },
> { .compatible = "atmel,sama5d2-gem", .data = &sama5d2_config },
> { .compatible = "atmel,sama5d3-gem", .data = &sama5d3_config },
> { .compatible = "atmel,sama5d3-macb", .data = &sama5d3macb_config },
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC
2019-01-16 9:57 [PATCH 0/8] ARM: at91/dt: update to existing drivers for the sam9x60 SoC Nicolas Ferre
` (7 preceding siblings ...)
2019-01-16 9:57 ` [PATCH 8/8] net: macb: add sam9x60-macb compatibility string Nicolas Ferre
@ 2019-02-06 17:51 ` Nicolas.Ferre
8 siblings, 0 replies; 21+ messages in thread
From: Nicolas.Ferre @ 2019-02-06 17:51 UTC (permalink / raw)
To: alexandre.belloni, Ludovic.Desroches, sre, gregkh, robh+dt
Cc: linux-kernel, linux-arm-kernel, linux-pm, netdev, davem,
linux-usb, stern, devicetree
All,
On 16/01/2019 at 10:57, Nicolas Ferre wrote:
> Hi,
>
> This series collects some little modifications to DT bindings and associated
> drivers changes for supporting the upcoming SAM9X60 SoC.
>
> I took the advantage of this series for fixing some of the leftovers in DT
> bindings for reset controller and Ethernet macb.
>
> These changes touch several sub-systems but I would like that these (mostly
> trivial) patches stay together for facilitating reviews, prevent breaking
> dependencies and facilitating the tracking of acceptance status. However, tell
> me if you think otherwise.
It seems it's not the preferred way to go and that I must split and send
to sub-system Maintainers so that bindings and driver code go together
through Maintainer's git trees (USB, power/reset, netdev).
> My intentions are that the series would enter Mainline through arm-soc tree:
> sounds okay to everyone? If okay, I'm ready to collect Ack tags...
I'm re-sending this split series. Some of the "Reviewed-by:" are missing
so we'll have the chance to add them on individual series.
Thanks for your reviews so far.
Best regards,
Nicolas
> For the first batch, I send the whole series to everyone. I'll try my best to
> reduce subsequent message deliveries if one part of the serries needs rework.
>
> Best regards,
> Nicolas
>
>
> Nicolas Ferre (8):
> dt-bindings: arm: atmel: add missing samx7 to reset controller
> dt-bindings: arm: atmel: add new sam9x60 reset controller binding
> dt-bindings: arm: atmel: add new sam9x60 SFR binding
> net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100
> interface
> net/macb: bindings doc: add sam9x60 binding
> power: reset: at91-reset: add support for sam9x60 SoC
> USB: host: ohci-at91: add sam9x60-sfr definition for ohci
> net: macb: add sam9x60-macb compatibility string
>
> .../devicetree/bindings/arm/atmel-sysregs.txt | 4 +++-
> Documentation/devicetree/bindings/net/macb.txt | 4 ++--
> drivers/net/ethernet/cadence/macb_main.c | 1 +
> drivers/power/reset/at91-reset.c | 13 +++++++++++++
> drivers/usb/host/ohci-at91.c | 7 +++++--
> 5 files changed, 24 insertions(+), 5 deletions(-)
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 21+ messages in thread