netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, j.vosburgh@gmail.com, vfalico@gmail.com,
	gospo@cumulusnetworks.com, jiri@resnulli.us,
	Nicolas Dichtel <nicolas.dichtel@6wind.com>
Subject: [PATCH net v3] rtnl/bond: don't send rtnl msg for unregistered iface
Date: Tue, 12 May 2015 17:17:45 +0200	[thread overview]
Message-ID: <1431443865-4327-1-git-send-email-nicolas.dichtel@6wind.com> (raw)
In-Reply-To: <555216DA.3020105@6wind.com>

Before the patch, the command 'ip link add bond2 type bond mode 802.3ad'
causes the kernel to send a rtnl message for the bond2 interface, with an
ifindex 0.

'ip monitor' shows:
0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default
    link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff
[snip]

First, nobody seems to care about NETDEV_CHANGEINFODATA (commit
d4261e565000 says that it was put only to notify userspace). Hence, we can
call directly rtmsg_ifinfo().
Secondly, prevent in rtmsg_ifinfo() to send notifications to userspace
about unregistered interfaces.

Fixes: d4261e565000 ("bonding: create netlink event when bonding option is changed")
CC: Jiri Pirko <jiri@resnulli.us>
Reported-by: Julien Meunier <julien.meunier@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
---

v3: move reg_state check in rtmsg_ifinfo()

v2: check dev->reg_state instead of ifindex
    call rtmsg_ifinfo() directly in __bond_opt_set()

There is about 20 occurences of "dev->reg_state .= NETREG_REGISTERED".
I will send a patch on net-next to introduce an helper for this when net
will be merged with this patch in net-next.

 drivers/net/bonding/bond_options.c | 2 +-
 include/linux/netdevice.h          | 3 +--
 net/core/rtnetlink.c               | 3 +++
 3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 4df28943d222..a2b72cc0e3e8 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -625,7 +625,7 @@ out:
 	if (ret)
 		bond_opt_error_interpret(bond, opt, ret, val);
 	else
-		call_netdevice_notifiers(NETDEV_CHANGEINFODATA, bond->dev);
+		rtmsg_ifinfo(RTM_NEWLINK, bond->dev, 0, GFP_KERNEL);
 
 	return ret;
 }
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 1899c74a7127..c040d48925fd 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2069,8 +2069,7 @@ struct pcpu_sw_netstats {
 #define NETDEV_CHANGEUPPER	0x0015
 #define NETDEV_RESEND_IGMP	0x0016
 #define NETDEV_PRECHANGEMTU	0x0017 /* notify before mtu change happened */
-#define NETDEV_CHANGEINFODATA	0x0018
-#define NETDEV_BONDING_INFO	0x0019
+#define NETDEV_BONDING_INFO	0x0018
 
 int register_netdevice_notifier(struct notifier_block *nb);
 int unregister_netdevice_notifier(struct notifier_block *nb);
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 837d30b5ffed..7b25f1ef3d75 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2415,6 +2415,9 @@ void rtmsg_ifinfo(int type, struct net_device *dev, unsigned int change,
 {
 	struct sk_buff *skb;
 
+	if (dev->reg_state != NETREG_REGISTERED)
+		return;
+
 	skb = rtmsg_ifinfo_build_skb(type, dev, change, flags);
 	if (skb)
 		rtmsg_ifinfo_send(skb, dev, flags);
-- 
2.2.2

  reply	other threads:[~2015-05-12 15:17 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-11 14:25 [PATCH net] rtnl: don't send rtnl msg for unregistered iface Nicolas Dichtel
2015-05-11 15:37 ` Jiri Pirko
2015-05-11 16:04   ` Nicolas Dichtel
2015-05-11 16:15     ` Nicolas Dichtel
2015-05-11 17:53       ` Jiri Pirko
2015-05-11 22:15         ` Andy Gospodarek
2015-05-12  8:43         ` Nicolas Dichtel
2015-05-12 15:03         ` [PATCH net v2] rtnl/bond: " Nicolas Dichtel
2015-05-12 15:06           ` Nicolas Dichtel
2015-05-12 15:17             ` Nicolas Dichtel [this message]
2015-05-12 15:58               ` [PATCH net v3] " Jiri Pirko
2015-05-12 16:10                 ` Nicolas Dichtel
2015-05-12 16:14                   ` Jiri Pirko
2015-05-13 12:19                     ` [PATCH net v4] " Nicolas Dichtel
2015-05-13 12:24                       ` Jiri Pirko
2015-05-13 12:36                         ` Nicolas Dichtel
2015-05-18  2:44                       ` David Miller
2015-07-13 14:11                       ` Kristian Evensen
2015-07-15 15:07                         ` Nicolas Dichtel
2015-07-16  9:06                         ` Nicolas Dichtel
2015-07-16  9:31                           ` [PATCH linux-3.18.y] rtnl: restore notifications for deleted interfaces Nicolas Dichtel
2015-05-12 17:12                 ` [PATCH net v3] rtnl/bond: don't send rtnl msg for unregistered iface Andy Gospodarek
2015-05-13 12:01                   ` Nicolas Dichtel
2015-05-13 14:43                     ` Andy Gospodarek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1431443865-4327-1-git-send-email-nicolas.dichtel@6wind.com \
    --to=nicolas.dichtel@6wind.com \
    --cc=davem@davemloft.net \
    --cc=gospo@cumulusnetworks.com \
    --cc=j.vosburgh@gmail.com \
    --cc=jiri@resnulli.us \
    --cc=netdev@vger.kernel.org \
    --cc=vfalico@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).