netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Robert Hancock <robert.hancock@calian.com>
To: radhey.shyam.pandey@xilinx.com, davem@davemloft.net, kuba@kernel.org
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
	Robert Hancock <robert.hancock@calian.com>
Subject: [PATCH net-next v3 v3 2/2] net: axienet: Enable more clocks
Date: Fri, 12 Mar 2021 13:52:14 -0600	[thread overview]
Message-ID: <20210312195214.4002847-3-robert.hancock@calian.com> (raw)
In-Reply-To: <20210312195214.4002847-1-robert.hancock@calian.com>

This driver was only enabling the first clock on the device, regardless
of its name. However, this controller logic can have multiple clocks
which should all be enabled. Add support for enabling additional clocks.
The clock names used are matching those used in the Xilinx version of this
driver as well as the Xilinx device tree generator, except for mgt_clk
which is not present there.

For backward compatibility, if no named clocks are present, the first
clock present is used for determining the MDIO bus clock divider.

Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
---
 drivers/net/ethernet/xilinx/xilinx_axienet.h  |  8 +++--
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 34 +++++++++++++++----
 .../net/ethernet/xilinx/xilinx_axienet_mdio.c |  4 +--
 3 files changed, 35 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 1e966a39967e..708769349f76 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -376,6 +376,8 @@ struct axidma_bd {
 	struct sk_buff *skb;
 } __aligned(XAXIDMA_BD_MINIMUM_ALIGNMENT);
 
+#define XAE_NUM_MISC_CLOCKS 3
+
 /**
  * struct axienet_local - axienet private per device data
  * @ndev:	Pointer for net_device to which it will be attached.
@@ -385,7 +387,8 @@ struct axidma_bd {
  * @phylink_config: phylink configuration settings
  * @pcs_phy:	Reference to PCS/PMA PHY if used
  * @switch_x_sgmii: Whether switchable 1000BaseX/SGMII mode is enabled in the core
- * @clk:	Clock for AXI bus
+ * @axi_clk:	AXI4-Lite bus clock
+ * @misc_clks:	Misc ethernet clocks (AXI4-Stream, Ref, MGT clocks)
  * @mii_bus:	Pointer to MII bus structure
  * @mii_clk_div: MII bus clock divider value
  * @regs_start: Resource start for axienet device addresses
@@ -434,7 +437,8 @@ struct axienet_local {
 
 	bool switch_x_sgmii;
 
-	struct clk *clk;
+	struct clk *axi_clk;
+	struct clk_bulk_data misc_clks[XAE_NUM_MISC_CLOCKS];
 
 	struct mii_bus *mii_bus;
 	u8 mii_clk_div;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 5d677db0aee5..9635101fbb88 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1863,17 +1863,35 @@ static int axienet_probe(struct platform_device *pdev)
 	lp->rx_bd_num = RX_BD_NUM_DEFAULT;
 	lp->tx_bd_num = TX_BD_NUM_DEFAULT;
 
-	lp->clk = devm_clk_get_optional(&pdev->dev, NULL);
-	if (IS_ERR(lp->clk)) {
-		ret = PTR_ERR(lp->clk);
+	lp->axi_clk = devm_clk_get_optional(&pdev->dev, "s_axi_lite_clk");
+	if (!lp->axi_clk) {
+		/* For backward compatibility, if named AXI clock is not present,
+		 * treat the first clock specified as the AXI clock.
+		 */
+		lp->axi_clk = devm_clk_get_optional(&pdev->dev, NULL);
+	}
+	if (IS_ERR(lp->axi_clk)) {
+		ret = PTR_ERR(lp->axi_clk);
 		goto free_netdev;
 	}
-	ret = clk_prepare_enable(lp->clk);
+	ret = clk_prepare_enable(lp->axi_clk);
 	if (ret) {
-		dev_err(&pdev->dev, "Unable to enable clock: %d\n", ret);
+		dev_err(&pdev->dev, "Unable to enable AXI clock: %d\n", ret);
 		goto free_netdev;
 	}
 
+	lp->misc_clks[0].id = "axis_clk";
+	lp->misc_clks[1].id = "ref_clk";
+	lp->misc_clks[2].id = "mgt_clk";
+
+	ret = devm_clk_bulk_get_optional(&pdev->dev, XAE_NUM_MISC_CLOCKS, lp->misc_clks);
+	if (ret)
+		goto cleanup_clk;
+
+	ret = clk_bulk_prepare_enable(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
+	if (ret)
+		goto cleanup_clk;
+
 	/* Map device registers */
 	ethres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	lp->regs = devm_ioremap_resource(&pdev->dev, ethres);
@@ -2109,7 +2127,8 @@ static int axienet_probe(struct platform_device *pdev)
 	of_node_put(lp->phy_node);
 
 cleanup_clk:
-	clk_disable_unprepare(lp->clk);
+	clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
+	clk_disable_unprepare(lp->axi_clk);
 
 free_netdev:
 	free_netdev(ndev);
@@ -2132,7 +2151,8 @@ static int axienet_remove(struct platform_device *pdev)
 
 	axienet_mdio_teardown(lp);
 
-	clk_disable_unprepare(lp->clk);
+	clk_bulk_disable_unprepare(XAE_NUM_MISC_CLOCKS, lp->misc_clks);
+	clk_disable_unprepare(lp->axi_clk);
 
 	of_node_put(lp->phy_node);
 	lp->phy_node = NULL;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 9c014cee34b2..48f544f6c999 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -159,8 +159,8 @@ int axienet_mdio_enable(struct axienet_local *lp)
 
 	lp->mii_clk_div = 0;
 
-	if (lp->clk) {
-		host_clock = clk_get_rate(lp->clk);
+	if (lp->axi_clk) {
+		host_clock = clk_get_rate(lp->axi_clk);
 	} else {
 		struct device_node *np1;
 
-- 
2.27.0


      parent reply	other threads:[~2021-03-12 19:54 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-12 19:52 [PATCH net-next v3 v3 0/2] axienet clock additions Robert Hancock
2021-03-12 19:52 ` [PATCH net-next v3 v3 1/2] dt-bindings: net: xilinx_axienet: Document additional clocks Robert Hancock
2021-03-24 17:08   ` Rob Herring
2021-03-24 17:19     ` Robert Hancock
2021-03-25 13:54       ` Rob Herring
2021-03-12 19:52 ` Robert Hancock [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210312195214.4002847-3-robert.hancock@calian.com \
    --to=robert.hancock@calian.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=radhey.shyam.pandey@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).