qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 35/49] target/arm: Tidy TBI handling in gen_a64_set_pc
Date: Fri, 18 Jan 2019 14:57:51 +0000	[thread overview]
Message-ID: <20190118145805.6852-36-peter.maydell@linaro.org> (raw)
In-Reply-To: <20190118145805.6852-1-peter.maydell@linaro.org>

From: Richard Henderson <richard.henderson@linaro.org>

We can perform this with fewer operations.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target/arm/translate-a64.c | 62 +++++++++++++-------------------------
 1 file changed, 21 insertions(+), 41 deletions(-)

diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index f49fe1de3a8..4d28a27c3bd 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -261,7 +261,7 @@ void gen_a64_set_pc_im(uint64_t val)
 /* Load the PC from a generic TCG variable.
  *
  * If address tagging is enabled via the TCR TBI bits, then loading
- * an address into the PC will clear out any tag in the it:
+ * an address into the PC will clear out any tag in it:
  *  + for EL2 and EL3 there is only one TBI bit, and if it is set
  *    then the address is zero-extended, clearing bits [63:56]
  *  + for EL0 and EL1, TBI0 controls addresses with bit 55 == 0
@@ -280,54 +280,34 @@ static void gen_a64_set_pc(DisasContext *s, TCGv_i64 src)
     int tbi = s->tbii;
 
     if (s->current_el <= 1) {
-        /* Test if NEITHER or BOTH TBI values are set.  If so, no need to
-         * examine bit 55 of address, can just generate code.
-         * If mixed, then test via generated code
-         */
-        if (tbi == 3) {
-            TCGv_i64 tmp_reg = tcg_temp_new_i64();
-            /* Both bits set, sign extension from bit 55 into [63:56] will
-             * cover both cases
-             */
-            tcg_gen_shli_i64(tmp_reg, src, 8);
-            tcg_gen_sari_i64(cpu_pc, tmp_reg, 8);
-            tcg_temp_free_i64(tmp_reg);
-        } else if (tbi == 0) {
-            /* Neither bit set, just load it as-is */
-            tcg_gen_mov_i64(cpu_pc, src);
-        } else {
-            TCGv_i64 tcg_tmpval = tcg_temp_new_i64();
-            TCGv_i64 tcg_bit55  = tcg_temp_new_i64();
-            TCGv_i64 tcg_zero   = tcg_const_i64(0);
+        if (tbi != 0) {
+            /* Sign-extend from bit 55.  */
+            tcg_gen_sextract_i64(cpu_pc, src, 0, 56);
 
-            tcg_gen_andi_i64(tcg_bit55, src, (1ull << 55));
+            if (tbi != 3) {
+                TCGv_i64 tcg_zero = tcg_const_i64(0);
 
-            if (tbi == 1) {
-                /* tbi0==1, tbi1==0, so 0-fill upper byte if bit 55 = 0 */
-                tcg_gen_andi_i64(tcg_tmpval, src,
-                                 0x00FFFFFFFFFFFFFFull);
-                tcg_gen_movcond_i64(TCG_COND_EQ, cpu_pc, tcg_bit55, tcg_zero,
-                                    tcg_tmpval, src);
-            } else {
-                /* tbi0==0, tbi1==1, so 1-fill upper byte if bit 55 = 1 */
-                tcg_gen_ori_i64(tcg_tmpval, src,
-                                0xFF00000000000000ull);
-                tcg_gen_movcond_i64(TCG_COND_NE, cpu_pc, tcg_bit55, tcg_zero,
-                                    tcg_tmpval, src);
+                /*
+                 * The two TBI bits differ.
+                 * If tbi0, then !tbi1: only use the extension if positive.
+                 * if !tbi0, then tbi1: only use the extension if negative.
+                 */
+                tcg_gen_movcond_i64(tbi == 1 ? TCG_COND_GE : TCG_COND_LT,
+                                    cpu_pc, cpu_pc, tcg_zero, cpu_pc, src);
+                tcg_temp_free_i64(tcg_zero);
             }
-            tcg_temp_free_i64(tcg_zero);
-            tcg_temp_free_i64(tcg_bit55);
-            tcg_temp_free_i64(tcg_tmpval);
+            return;
         }
-    } else {  /* EL > 1 */
+    } else {
         if (tbi != 0) {
             /* Force tag byte to all zero */
-            tcg_gen_andi_i64(cpu_pc, src, 0x00FFFFFFFFFFFFFFull);
-        } else {
-            /* Load unmodified address */
-            tcg_gen_mov_i64(cpu_pc, src);
+            tcg_gen_extract_i64(cpu_pc, src, 0, 56);
+            return;
         }
     }
+
+    /* Load unmodified address */
+    tcg_gen_mov_i64(cpu_pc, src);
 }
 
 typedef struct DisasCompare64 {
-- 
2.20.1

  parent reply	other threads:[~2019-01-18 14:58 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-18 14:57 [Qemu-devel] [PULL 00/49] target-arm queue Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 01/49] hw/char/stm32f2xx_usart: Do not update data register when device is disabled Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 02/49] hw/arm/virt-acpi-build: Set COHACC override flag in IORT SMMUv3 node Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 03/49] target/arm: Allow Aarch32 exception return to switch from Mon->Hyp Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 04/49] ftgmac100: implement the new MDIO interface on Aspeed SoC Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 05/49] target/arm: Add state for the ARMv8.3-PAuth extension Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 06/49] target/arm: Add SCTLR bits through ARMv8.5 Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 07/49] target/arm: Add PAuth active bit to tbflags Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 08/49] target/arm: Introduce raise_exception_ra Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 09/49] target/arm: Add PAuth helpers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 10/49] target/arm: Decode PAuth within system hint space Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 11/49] target/arm: Rearrange decode in disas_data_proc_1src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 12/49] target/arm: Decode PAuth within disas_data_proc_1src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 13/49] target/arm: Decode PAuth within disas_data_proc_2src Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 14/49] target/arm: Move helper_exception_return to helper-a64.c Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 15/49] target/arm: Add new_pc argument to helper_exception_return Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 16/49] target/arm: Rearrange decode in disas_uncond_b_reg Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 17/49] target/arm: Decode PAuth within disas_uncond_b_reg Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 18/49] target/arm: Decode Load/store register (pac) Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 19/49] target/arm: Move cpu_mmu_index out of line Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 20/49] target/arm: Introduce arm_mmu_idx Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 21/49] target/arm: Introduce arm_stage1_mmu_idx Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 22/49] target/arm: Create ARMVAParameters and helpers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 23/49] target/arm: Merge TBFLAG_AA_TB{0, 1} to TBII Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 24/49] target/arm: Export aa64_va_parameters to internals.h Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 25/49] target/arm: Add aa64_va_parameters_both Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 26/49] target/arm: Decode TBID from TCR Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 27/49] target/arm: Reuse aa64_va_parameters for setting tbflags Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 28/49] target/arm: Implement pauth_strip Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 29/49] target/arm: Implement pauth_auth Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 30/49] target/arm: Implement pauth_addpac Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 31/49] target/arm: Implement pauth_computepac Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 32/49] target/arm: Add PAuth system registers Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 33/49] target/arm: Enable PAuth for -cpu max Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 34/49] target/arm: Enable PAuth for user-only Peter Maydell
2019-01-18 14:57 ` Peter Maydell [this message]
2019-01-18 14:57 ` [Qemu-devel] [PULL 36/49] migration: Add post_save function to VMStateDescription Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 37/49] target/arm: Reorganize PMCCNTR accesses Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 38/49] target/arm: Swap PMU values before/after migrations Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 39/49] target/arm: Filter cycle counter based on PMCCFILTR_EL0 Peter Maydell
2020-08-24 16:33   ` Peter Maydell
2020-08-25 14:41     ` Aaron Lindsay
2020-08-25 14:48     ` [PATCH] target/arm: Count PMU events when MDCR.SPME is set Aaron Lindsay
2020-09-11 14:13       ` Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 40/49] target/arm: Allow AArch32 access for PMCCFILTR Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 41/49] target/arm: Implement PMOVSSET Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 42/49] target/arm: Define FIELDs for ID_DFR0 Peter Maydell
2019-01-18 14:57 ` [Qemu-devel] [PULL 43/49] target/arm: Make PMCEID[01]_EL0 64 bit registers, add PMCEID[23] Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 44/49] target/arm: Add array for supported PMU events, generate PMCEID[01]_EL0 Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 45/49] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 46/49] target/arm: PMU: Add instruction and cycle events Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 47/49] target/arm: PMU: Set PMCR.N to 4 Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 48/49] target/arm: Implement PMSWINC Peter Maydell
2019-01-18 14:58 ` [Qemu-devel] [PULL 49/49] tests/libqtest: Introduce qtest_init_with_serial() Peter Maydell
2019-01-31 17:48 ` [Qemu-devel] [PULL 00/49] target-arm queue no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190118145805.6852-36-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).